aboutsummaryrefslogtreecommitdiff
path: root/kernel/sched
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-05 13:23:27 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-05 13:23:27 -0700
commit534c97b0950b1967bca1c753aeaed32f5db40264 (patch)
tree9421d26e4f6d479d1bc32b036a731b065daab0fa /kernel/sched
parent64049d1973c1735f543eb7a55653e291e108b0cb (diff)
parent265f22a975c1e4cc3a4d1f94a3ec53ffbb6f5b9f (diff)
Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull 'full dynticks' support from Ingo Molnar: "This tree from Frederic Weisbecker adds a new, (exciting! :-) core kernel feature to the timer and scheduler subsystems: 'full dynticks', or CONFIG_NO_HZ_FULL=y. This feature extends the nohz variable-size timer tick feature from idle to busy CPUs (running at most one task) as well, potentially reducing the number of timer interrupts significantly. This feature got motivated by real-time folks and the -rt tree, but the general utility and motivation of full-dynticks runs wider than that: - HPC workloads get faster: CPUs running a single task should be able to utilize a maximum amount of CPU power. A periodic timer tick at HZ=1000 can cause a constant overhead of up to 1.0%. This feature removes that overhead - and speeds up the system by 0.5%-1.0% on typical distro configs even on modern systems. - Real-time workload latency reduction: CPUs running critical tasks should experience as little jitter as possible. The last remaining source of kernel-related jitter was the periodic timer tick. - A single task executing on a CPU is a pretty common situation, especially with an increasing number of cores/CPUs, so this feature helps desktop and mobile workloads as well. The cost of the feature is mainly related to increased timer reprogramming overhead when a CPU switches its tick period, and thus slightly longer to-idle and from-idle latency. Configuration-wise a third mode of operation is added to the existing two NOHZ kconfig modes: - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named as a config option. This is the traditional Linux periodic tick design: there's a HZ tick going on all the time, regardless of whether a CPU is idle or not. - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the periodic tick when a CPU enters idle mode. - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the tick when a CPU is idle, also slows the tick down to 1 Hz (one timer interrupt per second) when only a single task is running on a CPU. The .config behavior is compatible: existing !CONFIG_NO_HZ and CONFIG_NO_HZ=y settings get translated to the new values, without the user having to configure anything. CONFIG_NO_HZ_FULL is turned off by default. This feature is based on a lot of infrastructure work that has been steadily going upstream in the last 2-3 cycles: related RCU support and non-periodic cputime support in particular is upstream already. This tree adds the final pieces and activates the feature. The pull request is marked RFC because: - it's marked 64-bit only at the moment - the 32-bit support patch is small but did not get ready in time. - it has a number of fresh commits that came in after the merge window. The overwhelming majority of commits are from before the merge window, but still some aspects of the tree are fresh and so I marked it RFC. - it's a pretty wide-reaching feature with lots of effects - and while the components have been in testing for some time, the full combination is still not very widely used. That it's default-off should reduce its regression abilities and obviously there are no known regressions with CONFIG_NO_HZ_FULL=y enabled either. - the feature is not completely idempotent: there is no 100% equivalent replacement for a periodic scheduler/timer tick. In particular there's ongoing work to map out and reduce its effects on scheduler load-balancing and statistics. This should not impact correctness though, there are no known regressions related to this feature at this point. - it's a pretty ambitious feature that with time will likely be enabled by most Linux distros, and we'd like you to make input on its design/implementation, if you dislike some aspect we missed. Without flaming us to crisp! :-) Future plans: - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off the periodic tick altogether when there's a single busy task on a CPU. We'd first like 1 Hz to be exposed more widely before we go for the 0 Hz target though. - once we reach 0 Hz we can remove the periodic tick assumption from nr_running>=2 as well, by essentially interrupting busy tasks only as frequently as the sched_latency constraints require us to do - once every 4-40 msecs, depending on nr_running. I am personally leaning towards biting the bullet and doing this in v3.10, like the -rt tree this effort has been going on for too long - but the final word is up to you as usual. More technical details can be found in Documentation/timers/NO_HZ.txt" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) sched: Keep at least 1 tick per second for active dynticks tasks rcu: Fix full dynticks' dependency on wide RCU nocb mode nohz: Protect smp_processor_id() in tick_nohz_task_switch() nohz_full: Add documentation. cputime_nsecs: use math64.h for nsec resolution conversion helpers nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config nohz: Reduce overhead under high-freq idling patterns nohz: Remove full dynticks' superfluous dependency on RCU tree nohz: Fix unavailable tick_stop tracepoint in dynticks idle nohz: Add basic tracing nohz: Select wide RCU nocb for full dynticks nohz: Disable the tick when irq resume in full dynticks CPU nohz: Re-evaluate the tick for the new task after a context switch nohz: Prepare to stop the tick on irq exit nohz: Implement full dynticks kick nohz: Re-evaluate the tick from the scheduler IPI sched: New helper to prevent from stopping the tick in full dynticks sched: Kick full dynticks CPU that have more than one task enqueued. perf: New helper to prevent full dynticks CPUs from stopping tick perf: Kick full dynticks CPU if events rotation is needed ...
Diffstat (limited to 'kernel/sched')
-rw-r--r--kernel/sched/core.c92
-rw-r--r--kernel/sched/fair.c10
-rw-r--r--kernel/sched/idle_task.c1
-rw-r--r--kernel/sched/sched.h25
4 files changed, 110 insertions, 18 deletions
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 5662f58f0b6..58453b8272f 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -544,7 +544,7 @@ void resched_cpu(int cpu)
raw_spin_unlock_irqrestore(&rq->lock, flags);
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* In the semi idle case, use the nearest busy cpu for migrating timers
* from an idle cpu. This is good for power-savings.
@@ -582,7 +582,7 @@ unlock:
* account when the CPU goes back to idle and evaluates the timer
* wheel for the next timer event.
*/
-void wake_up_idle_cpu(int cpu)
+static void wake_up_idle_cpu(int cpu)
{
struct rq *rq = cpu_rq(cpu);
@@ -612,20 +612,56 @@ void wake_up_idle_cpu(int cpu)
smp_send_reschedule(cpu);
}
+static bool wake_up_full_nohz_cpu(int cpu)
+{
+ if (tick_nohz_full_cpu(cpu)) {
+ if (cpu != smp_processor_id() ||
+ tick_nohz_tick_stopped())
+ smp_send_reschedule(cpu);
+ return true;
+ }
+
+ return false;
+}
+
+void wake_up_nohz_cpu(int cpu)
+{
+ if (!wake_up_full_nohz_cpu(cpu))
+ wake_up_idle_cpu(cpu);
+}
+
static inline bool got_nohz_idle_kick(void)
{
int cpu = smp_processor_id();
return idle_cpu(cpu) && test_bit(NOHZ_BALANCE_KICK, nohz_flags(cpu));
}
-#else /* CONFIG_NO_HZ */
+#else /* CONFIG_NO_HZ_COMMON */
static inline bool got_nohz_idle_kick(void)
{
return false;
}
-#endif /* CONFIG_NO_HZ */
+#endif /* CONFIG_NO_HZ_COMMON */
+
+#ifdef CONFIG_NO_HZ_FULL
+bool sched_can_stop_tick(void)
+{
+ struct rq *rq;
+
+ rq = this_rq();
+
+ /* Make sure rq->nr_running update is visible after the IPI */
+ smp_rmb();
+
+ /* More than one running task need preemption */
+ if (rq->nr_running > 1)
+ return false;
+
+ return true;
+}
+#endif /* CONFIG_NO_HZ_FULL */
void sched_avg_update(struct rq *rq)
{
@@ -1357,7 +1393,8 @@ static void sched_ttwu_pending(void)
void scheduler_ipi(void)
{
- if (llist_empty(&this_rq()->wake_list) && !got_nohz_idle_kick())
+ if (llist_empty(&this_rq()->wake_list) && !got_nohz_idle_kick()
+ && !tick_nohz_full_cpu(smp_processor_id()))
return;
/*
@@ -1374,6 +1411,7 @@ void scheduler_ipi(void)
* somewhat pessimize the simple resched case.
*/
irq_enter();
+ tick_nohz_full_check();
sched_ttwu_pending();
/*
@@ -1855,6 +1893,8 @@ static void finish_task_switch(struct rq *rq, struct task_struct *prev)
kprobe_flush_task(prev);
put_task_struct(prev);
}
+
+ tick_nohz_task_switch(current);
}
#ifdef CONFIG_SMP
@@ -2118,7 +2158,7 @@ calc_load(unsigned long load, unsigned long exp, unsigned long active)
return load >> FSHIFT;
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* Handle NO_HZ for the global load-average.
*
@@ -2344,12 +2384,12 @@ static void calc_global_nohz(void)
smp_wmb();
calc_load_idx++;
}
-#else /* !CONFIG_NO_HZ */
+#else /* !CONFIG_NO_HZ_COMMON */
static inline long calc_load_fold_idle(void) { return 0; }
static inline void calc_global_nohz(void) { }
-#endif /* CONFIG_NO_HZ */
+#endif /* CONFIG_NO_HZ_COMMON */
/*
* calc_load - update the avenrun load estimates 10 ticks after the
@@ -2509,7 +2549,7 @@ static void __update_cpu_load(struct rq *this_rq, unsigned long this_load,
sched_avg_update(this_rq);
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* There is no sane way to deal with nohz on smp when using jiffies because the
* cpu doing the jiffies update might drift wrt the cpu doing the jiffy reading
@@ -2569,7 +2609,7 @@ void update_cpu_load_nohz(void)
}
raw_spin_unlock(&this_rq->lock);
}
-#endif /* CONFIG_NO_HZ */
+#endif /* CONFIG_NO_HZ_COMMON */
/*
* Called from scheduler_tick()
@@ -2696,7 +2736,34 @@ void scheduler_tick(void)
rq->idle_balance = idle_cpu(cpu);
trigger_load_balance(rq, cpu);
#endif
+ rq_last_tick_reset(rq);
+}
+
+#ifdef CONFIG_NO_HZ_FULL
+/**
+ * scheduler_tick_max_deferment
+ *
+ * Keep at least one tick per second when a single
+ * active task is running because the scheduler doesn't
+ * yet completely support full dynticks environment.
+ *
+ * This makes sure that uptime, CFS vruntime, load
+ * balancing, etc... continue to move forward, even
+ * with a very low granularity.
+ */
+u64 scheduler_tick_max_deferment(void)
+{
+ struct rq *rq = this_rq();
+ unsigned long next, now = ACCESS_ONCE(jiffies);
+
+ next = rq->last_sched_tick + HZ;
+
+ if (time_before_eq(next, now))
+ return 0;
+
+ return jiffies_to_usecs(next - now) * NSEC_PER_USEC;
}
+#endif
notrace unsigned long get_parent_ip(unsigned long addr)
{
@@ -6951,9 +7018,12 @@ void __init sched_init(void)
INIT_LIST_HEAD(&rq->cfs_tasks);
rq_attach_root(rq, &def_root_domain);
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
rq->nohz_flags = 0;
#endif
+#ifdef CONFIG_NO_HZ_FULL
+ rq->last_sched_tick = 0;
+#endif
#endif
init_rq_hrtick(rq);
atomic_set(&rq->nr_iowait, 0);
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 8bf7081b1ec..c61a614465c 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -5355,7 +5355,7 @@ out_unlock:
return 0;
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
* idle load balancing details
* - When one of the busy CPUs notice that there may be an idle rebalancing
@@ -5572,9 +5572,9 @@ out:
rq->next_balance = next_balance;
}
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
/*
- * In CONFIG_NO_HZ case, the idle balance kickee will do the
+ * In CONFIG_NO_HZ_COMMON case, the idle balance kickee will do the
* rebalancing for all the cpus for whom scheduler ticks are stopped.
*/
static void nohz_idle_balance(int this_cpu, enum cpu_idle_type idle)
@@ -5717,7 +5717,7 @@ void trigger_load_balance(struct rq *rq, int cpu)
if (time_after_eq(jiffies, rq->next_balance) &&
likely(!on_null_domain(cpu)))
raise_softirq(SCHED_SOFTIRQ);
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
if (nohz_kick_needed(rq, cpu) && likely(!on_null_domain(cpu)))
nohz_balancer_kick(cpu);
#endif
@@ -6187,7 +6187,7 @@ __init void init_sched_fair_class(void)
#ifdef CONFIG_SMP
open_softirq(SCHED_SOFTIRQ, run_rebalance_domains);
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
nohz.next_balance = jiffies;
zalloc_cpumask_var(&nohz.idle_cpus_mask, GFP_NOWAIT);
cpu_notifier(sched_ilb_notifier, 0);
diff --git a/kernel/sched/idle_task.c b/kernel/sched/idle_task.c
index b8ce7732834..d8da01008d3 100644
--- a/kernel/sched/idle_task.c
+++ b/kernel/sched/idle_task.c
@@ -17,6 +17,7 @@ select_task_rq_idle(struct task_struct *p, int sd_flag, int flags)
static void pre_schedule_idle(struct rq *rq, struct task_struct *prev)
{
idle_exit_fair(rq);
+ rq_last_tick_reset(rq);
}
static void post_schedule_idle(struct rq *rq)
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 4c225c4c711..ce39224d615 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -5,6 +5,7 @@
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/stop_machine.h>
+#include <linux/tick.h>
#include "cpupri.h"
#include "cpuacct.h"
@@ -405,10 +406,13 @@ struct rq {
#define CPU_LOAD_IDX_MAX 5
unsigned long cpu_load[CPU_LOAD_IDX_MAX];
unsigned long last_load_update_tick;
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
u64 nohz_stamp;
unsigned long nohz_flags;
#endif
+#ifdef CONFIG_NO_HZ_FULL
+ unsigned long last_sched_tick;
+#endif
int skip_clock_update;
/* capture load from *all* tasks on this cpu: */
@@ -1072,6 +1076,16 @@ static inline u64 steal_ticks(u64 steal)
static inline void inc_nr_running(struct rq *rq)
{
rq->nr_running++;
+
+#ifdef CONFIG_NO_HZ_FULL
+ if (rq->nr_running == 2) {
+ if (tick_nohz_full_cpu(rq->cpu)) {
+ /* Order rq->nr_running write against the IPI */
+ smp_wmb();
+ smp_send_reschedule(rq->cpu);
+ }
+ }
+#endif
}
static inline void dec_nr_running(struct rq *rq)
@@ -1079,6 +1093,13 @@ static inline void dec_nr_running(struct rq *rq)
rq->nr_running--;
}
+static inline void rq_last_tick_reset(struct rq *rq)
+{
+#ifdef CONFIG_NO_HZ_FULL
+ rq->last_sched_tick = jiffies;
+#endif
+}
+
extern void update_rq_clock(struct rq *rq);
extern void activate_task(struct rq *rq, struct task_struct *p, int flags);
@@ -1299,7 +1320,7 @@ extern void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq);
extern void account_cfs_bandwidth_used(int enabled, int was_enabled);
-#ifdef CONFIG_NO_HZ
+#ifdef CONFIG_NO_HZ_COMMON
enum rq_nohz_flag_bits {
NOHZ_TICK_STOPPED,
NOHZ_BALANCE_KICK,