aboutsummaryrefslogtreecommitdiff
path: root/net/mac80211/pm.c
diff options
context:
space:
mode:
authorJohannes Berg <johannes@sipsolutions.net>2009-04-14 10:09:24 +0200
committerJohn W. Linville <linville@tuxdriver.com>2009-04-22 16:57:14 -0400
commitf2753ddbadb0873a98421415882318251bbd9eaa (patch)
treedaad40232be13d91835b30234e5743dfdd582f19 /net/mac80211/pm.c
parenta1c555802a62c845520d2486d783c9bb1d5e68a9 (diff)
mac80211: add hardware restart function
Some hardware defects may require the hardware to be re-initialised completely from scratch. Drivers would need much information (for instance the current MAC address, crypto keys, beaconing information, etc.) stored duplicated from mac80211 to be able to do this, so let mac80211 help them. The new ieee80211_restart_hw() function requires the same code as resuming, so move that code into a new ieee80211_reconfig() function in util.c and leave only the suspend code in pm.c. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'net/mac80211/pm.c')
-rw-r--r--net/mac80211/pm.c110
1 files changed, 5 insertions, 105 deletions
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 2b4c95cd9da..b38986c9dee 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -72,108 +72,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
return 0;
}
-int __ieee80211_resume(struct ieee80211_hw *hw)
-{
- struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_sub_if_data *sdata;
- struct ieee80211_if_init_conf conf;
- struct sta_info *sta;
- unsigned long flags;
- int res;
-
- /* restart hardware */
- if (local->open_count) {
- res = local->ops->start(hw);
-
- ieee80211_led_radio(local, hw->conf.radio_enabled);
- }
-
- /* add interfaces */
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
- sdata->vif.type != NL80211_IFTYPE_MONITOR &&
- netif_running(sdata->dev)) {
- conf.vif = &sdata->vif;
- conf.type = sdata->vif.type;
- conf.mac_addr = sdata->dev->dev_addr;
- res = local->ops->add_interface(hw, &conf);
- }
- }
-
- /* add STAs back */
- if (local->ops->sta_notify) {
- spin_lock_irqsave(&local->sta_lock, flags);
- list_for_each_entry(sta, &local->sta_list, list) {
- if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
- sdata = container_of(sdata->bss,
- struct ieee80211_sub_if_data,
- u.ap);
-
- local->ops->sta_notify(hw, &sdata->vif,
- STA_NOTIFY_ADD, &sta->sta);
- }
- spin_unlock_irqrestore(&local->sta_lock, flags);
- }
-
- /* Clear Suspend state so that ADDBA requests can be processed */
-
- rcu_read_lock();
-
- if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) {
- list_for_each_entry_rcu(sta, &local->sta_list, list) {
- clear_sta_flags(sta, WLAN_STA_SUSPEND);
- }
- }
-
- rcu_read_unlock();
-
- /* setup RTS threshold */
- if (local->ops->set_rts_threshold)
- local->ops->set_rts_threshold(hw, local->rts_threshold);
-
- /* reconfigure hardware */
- ieee80211_hw_config(local, ~0);
-
- netif_addr_lock_bh(local->mdev);
- ieee80211_configure_filter(local);
- netif_addr_unlock_bh(local->mdev);
-
- /* Finally also reconfigure all the BSS information */
- list_for_each_entry(sdata, &local->interfaces, list) {
- u32 changed = ~0;
- if (!netif_running(sdata->dev))
- continue;
- switch (sdata->vif.type) {
- case NL80211_IFTYPE_STATION:
- /* disable beacon change bits */
- changed &= ~IEEE80211_IFCC_BEACON;
- /* fall through */
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_MESH_POINT:
- WARN_ON(ieee80211_if_config(sdata, changed));
- ieee80211_bss_info_change_notify(sdata, ~0);
- break;
- case NL80211_IFTYPE_WDS:
- break;
- case NL80211_IFTYPE_AP_VLAN:
- case NL80211_IFTYPE_MONITOR:
- /* ignore virtual */
- break;
- case NL80211_IFTYPE_UNSPECIFIED:
- case __NL80211_IFTYPE_AFTER_LAST:
- WARN_ON(1);
- break;
- }
- }
-
- /* add back keys */
- list_for_each_entry(sdata, &local->interfaces, list)
- if (netif_running(sdata->dev))
- ieee80211_enable_keys(sdata);
-
- ieee80211_wake_queues_by_reason(hw,
- IEEE80211_QUEUE_STOP_REASON_SUSPEND);
-
- return 0;
-}
+/*
+ * __ieee80211_resume() is a static inline which just calls
+ * ieee80211_reconfig(), which is also needed for hardware
+ * hang/firmware failure/etc. recovery.
+ */