ALSA: aoa: clean up file names

This cleans up the apple onboard audio driver filenames.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 1118 insertions, 0 deletions

diff --git a/sound/aoa/codecs/onyx.c b/sound/aoa/codecs/onyx.c
new file mode 100644
index 00000000000..15500b9d2da
--- /dev/null
+++ b/sound/aoa/codecs/onyx.c
@@ -0,0 +1,1118 @@
+/*
+ * Apple Onboard Audio driver for Onyx codec
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * GPL v2, can be found in COPYING.
+ *
+ *
+ * This is a driver for the pcm3052 codec chip (codenamed Onyx)
+ * that is present in newer Apple hardware (with digital output).
+ *
+ * The Onyx codec has the following connections (listed by the bit
+ * to be used in aoa_codec.connected):
+ *  0: analog output
+ *  1: digital output
+ *  2: line input
+ *  3: microphone input
+ * Note that even though I know of no machine that has for example
+ * the digital output connected but not the analog, I have handled
+ * all the different cases in the code so that this driver may serve
+ * as a good example of what to do.
+ *
+ * NOTE: This driver assumes that there's at most one chip to be
+ * 	 used with one alsa card, in form of creating all kinds
+ *	 of mixer elements without regard for their existence.
+ *	 But snd-aoa assumes that there's at most one card, so
+ *	 this means you can only have one onyx on a system. This
+ *	 should probably be fixed by changing the assumption of
+ *	 having just a single card on a system, and making the
+ *	 'card' pointer accessible to anyone who needs it instead
+ *	 of hiding it in the aoa_snd_* functions...
+ *
+ */
+#include <linux/delay.h>
+#include <linux/module.h>
+MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("pcm3052 (onyx) codec driver for snd-aoa");
+
+#include "onyx.h"
+#include "../aoa.h"
+#include "../soundbus/soundbus.h"
+
+
+#define PFX "snd-aoa-codec-onyx: "
+
+struct onyx {
+	/* cache registers 65 to 80, they are write-only! */
+	u8			cache[16];
+	struct i2c_client	i2c;
+	struct aoa_codec	codec;
+	u32			initialised:1,
+				spdif_locked:1,
+				analog_locked:1,
+				original_mute:2;
+	int			open_count;
+	struct codec_info	*codec_info;
+
+	/* mutex serializes concurrent access to the device
+	 * and this structure.
+	 */
+	struct mutex mutex;
+};
+#define codec_to_onyx(c) container_of(c, struct onyx, codec)
+
+/* both return 0 if all ok, else on error */
+static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value)
+{
+	s32 v;
+
+	if (reg != ONYX_REG_CONTROL) {
+		*value = onyx->cache[reg-FIRSTREGISTER];
+		return 0;
+	}
+	v = i2c_smbus_read_byte_data(&onyx->i2c, reg);
+	if (v < 0)
+		return -1;
+	*value = (u8)v;
+	onyx->cache[ONYX_REG_CONTROL-FIRSTREGISTER] = *value;
+	return 0;
+}
+
+static int onyx_write_register(struct onyx *onyx, u8 reg, u8 value)
+{
+	int result;
+
+	result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value);
+	if (!result)
+		onyx->cache[reg-FIRSTREGISTER] = value;
+	return result;
+}
+
+/* alsa stuff */
+
+static int onyx_dev_register(struct snd_device *dev)
+{
+	return 0;
+}
+
+static struct snd_device_ops ops = {
+	.dev_register = onyx_dev_register,
+};
+
+/* this is necessary because most alsa mixer programs
+ * can't properly handle the negative range */
+#define VOLUME_RANGE_SHIFT	128
+
+static int onyx_snd_vol_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = -128 + VOLUME_RANGE_SHIFT;
+	uinfo->value.integer.max = -1 + VOLUME_RANGE_SHIFT;
+	return 0;
+}
+
+static int onyx_snd_vol_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+	s8 l, r;
+
+	mutex_lock(&onyx->mutex);
+	onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l);
+	onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r);
+	mutex_unlock(&onyx->mutex);
+
+	ucontrol->value.integer.value[0] = l + VOLUME_RANGE_SHIFT;
+	ucontrol->value.integer.value[1] = r + VOLUME_RANGE_SHIFT;
+
+	return 0;
+}
+
+static int onyx_snd_vol_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+	s8 l, r;
+
+	if (ucontrol->value.integer.value[0] < -128 + VOLUME_RANGE_SHIFT ||
+	    ucontrol->value.integer.value[0] > -1 + VOLUME_RANGE_SHIFT)
+		return -EINVAL;
+	if (ucontrol->value.integer.value[1] < -128 + VOLUME_RANGE_SHIFT ||
+	    ucontrol->value.integer.value[1] > -1 + VOLUME_RANGE_SHIFT)
+		return -EINVAL;
+
+	mutex_lock(&onyx->mutex);
+	onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_LEFT, &l);
+	onyx_read_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT, &r);
+
+	if (l + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[0] &&
+	    r + VOLUME_RANGE_SHIFT == ucontrol->value.integer.value[1]) {
+		mutex_unlock(&onyx->mutex);
+		return 0;
+	}
+
+	onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_LEFT,
+			    ucontrol->value.integer.value[0]
+			     - VOLUME_RANGE_SHIFT);
+	onyx_write_register(onyx, ONYX_REG_DAC_ATTEN_RIGHT,
+			    ucontrol->value.integer.value[1]
+			     - VOLUME_RANGE_SHIFT);
+	mutex_unlock(&onyx->mutex);
+
+	return 1;
+}
+
+static struct snd_kcontrol_new volume_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Master Playback Volume",
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = onyx_snd_vol_info,
+	.get = onyx_snd_vol_get,
+	.put = onyx_snd_vol_put,
+};
+
+/* like above, this is necessary because a lot
+ * of alsa mixer programs don't handle ranges
+ * that don't start at 0 properly.
+ * even alsamixer is one of them... */
+#define INPUTGAIN_RANGE_SHIFT	(-3)
+
+static int onyx_snd_inputgain_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 3 + INPUTGAIN_RANGE_SHIFT;
+	uinfo->value.integer.max = 28 + INPUTGAIN_RANGE_SHIFT;
+	return 0;
+}
+
+static int onyx_snd_inputgain_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+	u8 ig;
+
+	mutex_lock(&onyx->mutex);
+	onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &ig);
+	mutex_unlock(&onyx->mutex);
+
+	ucontrol->value.integer.value[0] =
+		(ig & ONYX_ADC_PGA_GAIN_MASK) + INPUTGAIN_RANGE_SHIFT;
+
+	return 0;
+}
+
+static int onyx_snd_inputgain_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+	u8 v, n;
+
+	if (ucontrol->value.integer.value[0] < 3 + INPUTGAIN_RANGE_SHIFT ||
+	    ucontrol->value.integer.value[0] > 28 + INPUTGAIN_RANGE_SHIFT)
+		return -EINVAL;
+	mutex_lock(&onyx->mutex);
+	onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
+	n = v;
+	n &= ~ONYX_ADC_PGA_GAIN_MASK;
+	n |= (ucontrol->value.integer.value[0] - INPUTGAIN_RANGE_SHIFT)
+		& ONYX_ADC_PGA_GAIN_MASK;
+	onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, n);
+	mutex_unlock(&onyx->mutex);
+
+	return n != v;
+}
+
+static struct snd_kcontrol_new inputgain_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Master Capture Volume",
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = onyx_snd_inputgain_info,
+	.get = onyx_snd_inputgain_get,
+	.put = onyx_snd_inputgain_put,
+};
+
+static int onyx_snd_capture_source_info(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[] = { "Line-In", "Microphone" };
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = 2;
+	if (uinfo->value.enumerated.item > 1)
+		uinfo->value.enumerated.item = 1;
+	strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
+	return 0;
+}
+
+static int onyx_snd_capture_source_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+	s8 v;
+
+	mutex_lock(&onyx->mutex);
+	onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
+	mutex_unlock(&onyx->mutex);
+
+	ucontrol->value.enumerated.item[0] = !!(v&ONYX_ADC_INPUT_MIC);
+
+	return 0;
+}
+
+static void onyx_set_capture_source(struct onyx *onyx, int mic)
+{
+	s8 v;
+
+	mutex_lock(&onyx->mutex);
+	onyx_read_register(onyx, ONYX_REG_ADC_CONTROL, &v);
+	v &= ~ONYX_ADC_INPUT_MIC;
+	if (mic)
+		v |= ONYX_ADC_INPUT_MIC;
+	onyx_write_register(onyx, ONYX_REG_ADC_CONTROL, v);
+	mutex_unlock(&onyx->mutex);
+}
+
+static int onyx_snd_capture_source_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	if (ucontrol->value.enumerated.item[0] > 1)
+		return -EINVAL;
+	onyx_set_capture_source(snd_kcontrol_chip(kcontrol),
+				ucontrol->value.enumerated.item[0]);
+	return 1;
+}
+
+static struct snd_kcontrol_new capture_source_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	/* If we name this 'Input Source', it properly shows up in
+	 * alsamixer as a selection, * but it's shown under the
+	 * 'Playback' category.
+	 * If I name it 'Capture Source', it shows up in strange
+	 * ways (two bools of which one can be selected at a
+	 * time) but at least it's shown in the 'Capture'
+	 * category.
+	 * I was told that this was due to backward compatibility,
+	 * but I don't understand then why the mangling is *not*
+	 * done when I name it "Input Source".....
+	 */
+	.name = "Capture Source",
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = onyx_snd_capture_source_info,
+	.get = onyx_snd_capture_source_get,
+	.put = onyx_snd_capture_source_put,
+};
+
+#define onyx_snd_mute_info	snd_ctl_boolean_stereo_info
+
+static int onyx_snd_mute_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+	u8 c;
+
+	mutex_lock(&onyx->mutex);
+	onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &c);
+	mutex_unlock(&onyx->mutex);
+
+	ucontrol->value.integer.value[0] = !(c & ONYX_MUTE_LEFT);
+	ucontrol->value.integer.value[1] = !(c & ONYX_MUTE_RIGHT);
+
+	return 0;
+}
+
+static int onyx_snd_mute_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+	u8 v = 0, c = 0;
+	int err = -EBUSY;
+
+	mutex_lock(&onyx->mutex);
+	if (onyx->analog_locked)
+		goto out_unlock;
+
+	onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
+	c = v;
+	c &= ~(ONYX_MUTE_RIGHT | ONYX_MUTE_LEFT);
+	if (!ucontrol->value.integer.value[0])
+		c |= ONYX_MUTE_LEFT;
+	if (!ucontrol->value.integer.value[1])
+		c |= ONYX_MUTE_RIGHT;
+	err = onyx_write_register(onyx, ONYX_REG_DAC_CONTROL, c);
+
+ out_unlock:
+	mutex_unlock(&onyx->mutex);
+
+	return !err ? (v != c) : err;
+}
+
+static struct snd_kcontrol_new mute_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Master Playback Switch",
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = onyx_snd_mute_info,
+	.get = onyx_snd_mute_get,
+	.put = onyx_snd_mute_put,
+};
+
+
+#define onyx_snd_single_bit_info	snd_ctl_boolean_mono_info
+
+#define FLAG_POLARITY_INVERT	1
+#define FLAG_SPDIFLOCK		2
+
+static int onyx_snd_single_bit_get(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+	u8 c;
+	long int pv = kcontrol->private_value;
+	u8 polarity = (pv >> 16) & FLAG_POLARITY_INVERT;
+	u8 address = (pv >> 8) & 0xff;
+	u8 mask = pv & 0xff;
+
+	mutex_lock(&onyx->mutex);
+	onyx_read_register(onyx, address, &c);
+	mutex_unlock(&onyx->mutex);
+
+	ucontrol->value.integer.value[0] = !!(c & mask) ^ polarity;
+
+	return 0;
+}
+
+static int onyx_snd_single_bit_put(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+	u8 v = 0, c = 0;
+	int err;
+	long int pv = kcontrol->private_value;
+	u8 polarity = (pv >> 16) & FLAG_POLARITY_INVERT;
+	u8 spdiflock = (pv >> 16) & FLAG_SPDIFLOCK;
+	u8 address = (pv >> 8) & 0xff;
+	u8 mask = pv & 0xff;
+
+	mutex_lock(&onyx->mutex);
+	if (spdiflock && onyx->spdif_locked) {
+		/* even if alsamixer doesn't care.. */
+		err = -EBUSY;
+		goto out_unlock;
+	}
+	onyx_read_register(onyx, address, &v);
+	c = v;
+	c &= ~(mask);
+	if (!!ucontrol->value.integer.value[0] ^ polarity)
+		c |= mask;
+	err = onyx_write_register(onyx, address, c);
+
+ out_unlock:
+	mutex_unlock(&onyx->mutex);
+
+	return !err ? (v != c) : err;
+}
+
+#define SINGLE_BIT(n, type, description, address, mask, flags)	 	\
+static struct snd_kcontrol_new n##_control = {				\
+	.iface = SNDRV_CTL_ELEM_IFACE_##type,				\
+	.name = description,						\
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,			\
+	.info = onyx_snd_single_bit_info,				\
+	.get = onyx_snd_single_bit_get,					\
+	.put = onyx_snd_single_bit_put,					\
+	.private_value = (flags << 16) | (address << 8) | mask		\
+}
+
+SINGLE_BIT(spdif,
+	   MIXER,
+	   SNDRV_CTL_NAME_IEC958("", PLAYBACK, SWITCH),
+	   ONYX_REG_DIG_INFO4,
+	   ONYX_SPDIF_ENABLE,
+	   FLAG_SPDIFLOCK);
+SINGLE_BIT(ovr1,
+	   MIXER,
+	   "Oversampling Rate",
+	   ONYX_REG_DAC_CONTROL,
+	   ONYX_OVR1,
+	   0);
+SINGLE_BIT(flt0,
+	   MIXER,
+	   "Fast Digital Filter Rolloff",
+	   ONYX_REG_DAC_FILTER,
+	   ONYX_ROLLOFF_FAST,
+	   FLAG_POLARITY_INVERT);
+SINGLE_BIT(hpf,
+	   MIXER,
+	   "Highpass Filter",
+	   ONYX_REG_ADC_HPF_BYPASS,
+	   ONYX_HPF_DISABLE,
+	   FLAG_POLARITY_INVERT);
+SINGLE_BIT(dm12,
+	   MIXER,
+	   "Digital De-Emphasis",
+	   ONYX_REG_DAC_DEEMPH,
+	   ONYX_DIGDEEMPH_CTRL,
+	   0);
+
+static int onyx_spdif_info(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+	uinfo->count = 1;
+	return 0;
+}
+
+static int onyx_spdif_mask_get(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *ucontrol)
+{
+	/* datasheet page 30, all others are 0 */
+	ucontrol->value.iec958.status[0] = 0x3e;
+	ucontrol->value.iec958.status[1] = 0xff;
+
+	ucontrol->value.iec958.status[3] = 0x3f;
+	ucontrol->value.iec958.status[4] = 0x0f;
+
+	return 0;
+}
+
+static struct snd_kcontrol_new onyx_spdif_mask = {
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ,
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		SNDRV_CTL_NAME_IEC958("",PLAYBACK,CON_MASK),
+	.info =		onyx_spdif_info,
+	.get =		onyx_spdif_mask_get,
+};
+
+static int onyx_spdif_get(struct snd_kcontrol *kcontrol,
+			  struct snd_ctl_elem_value *ucontrol)
+{
+	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+	u8 v;
+
+	mutex_lock(&onyx->mutex);
+	onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v);
+	ucontrol->value.iec958.status[0] = v & 0x3e;
+
+	onyx_read_register(onyx, ONYX_REG_DIG_INFO2, &v);
+	ucontrol->value.iec958.status[1] = v;
+
+	onyx_read_register(onyx, ONYX_REG_DIG_INFO3, &v);
+	ucontrol->value.iec958.status[3] = v & 0x3f;
+
+	onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
+	ucontrol->value.iec958.status[4] = v & 0x0f;
+	mutex_unlock(&onyx->mutex);
+
+	return 0;
+}
+
+static int onyx_spdif_put(struct snd_kcontrol *kcontrol,
+			  struct snd_ctl_elem_value *ucontrol)
+{
+	struct onyx *onyx = snd_kcontrol_chip(kcontrol);
+	u8 v;
+
+	mutex_lock(&onyx->mutex);
+	onyx_read_register(onyx, ONYX_REG_DIG_INFO1, &v);
+	v = (v & ~0x3e) | (ucontrol->value.iec958.status[0] & 0x3e);
+	onyx_write_register(onyx, ONYX_REG_DIG_INFO1, v);
+
+	v = ucontrol->value.iec958.status[1];
+	onyx_write_register(onyx, ONYX_REG_DIG_INFO2, v);
+
+	onyx_read_register(onyx, ONYX_REG_DIG_INFO3, &v);
+	v = (v & ~0x3f) | (ucontrol->value.iec958.status[3] & 0x3f);
+	onyx_write_register(onyx, ONYX_REG_DIG_INFO3, v);
+
+	onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
+	v = (v & ~0x0f) | (ucontrol->value.iec958.status[4] & 0x0f);
+	onyx_write_register(onyx, ONYX_REG_DIG_INFO4, v);
+	mutex_unlock(&onyx->mutex);
+
+	return 1;
+}
+
+static struct snd_kcontrol_new onyx_spdif_ctrl = {
+	.access =	SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
+	.info =		onyx_spdif_info,
+	.get =		onyx_spdif_get,
+	.put =		onyx_spdif_put,
+};
+
+/* our registers */
+
+static u8 register_map[] = {
+	ONYX_REG_DAC_ATTEN_LEFT,
+	ONYX_REG_DAC_ATTEN_RIGHT,
+	ONYX_REG_CONTROL,
+	ONYX_REG_DAC_CONTROL,
+	ONYX_REG_DAC_DEEMPH,
+	ONYX_REG_DAC_FILTER,
+	ONYX_REG_DAC_OUTPHASE,
+	ONYX_REG_ADC_CONTROL,
+	ONYX_REG_ADC_HPF_BYPASS,
+	ONYX_REG_DIG_INFO1,
+	ONYX_REG_DIG_INFO2,
+	ONYX_REG_DIG_INFO3,
+	ONYX_REG_DIG_INFO4
+};
+
+static u8 initial_values[ARRAY_SIZE(register_map)] = {
+	0x80, 0x80, /* muted */
+	ONYX_MRST | ONYX_SRST, /* but handled specially! */
+	ONYX_MUTE_LEFT | ONYX_MUTE_RIGHT,
+	0, /* no deemphasis */
+	ONYX_DAC_FILTER_ALWAYS,
+	ONYX_OUTPHASE_INVERTED,
+	(-1 /*dB*/ + 8) & 0xF, /* line in selected, -1 dB gain*/
+	ONYX_ADC_HPF_ALWAYS,
+	(1<<2),	/* pcm audio */
+	2,	/* category: pcm coder */
+	0,	/* sampling frequency 44.1 kHz, clock accuracy level II */
+	1	/* 24 bit depth */
+};
+
+/* reset registers of chip, either to initial or to previous values */
+static int onyx_register_init(struct onyx *onyx)
+{
+	int i;
+	u8 val;
+	u8 regs[sizeof(initial_values)];
+
+	if (!onyx->initialised) {
+		memcpy(regs, initial_values, sizeof(initial_values));
+		if (onyx_read_register(onyx, ONYX_REG_CONTROL, &val))
+			return -1;
+		val &= ~ONYX_SILICONVERSION;
+		val |= initial_values[3];
+		regs[3] = val;
+	} else {
+		for (i=0; i<sizeof(register_map); i++)
+			regs[i] = onyx->cache[register_map[i]-FIRSTREGISTER];
+	}
+
+	for (i=0; i<sizeof(register_map); i++) {
+		if (onyx_write_register(onyx, register_map[i], regs[i]))
+			return -1;
+	}
+	onyx->initialised = 1;
+	return 0;
+}
+
+static struct transfer_info onyx_transfers[] = {
+	/* this is first so we can skip it if no input is present...
+	 * No hardware exists with that, but it's here as an example
+	 * of what to do :) */
+	{
+		/* analog input */
+		.formats = SNDRV_PCM_FMTBIT_S8 |
+			   SNDRV_PCM_FMTBIT_S16_BE |
+			   SNDRV_PCM_FMTBIT_S24_BE,
+		.rates = SNDRV_PCM_RATE_8000_96000,
+		.transfer_in = 1,
+		.must_be_clock_source = 0,
+		.tag = 0,
+	},
+	{
+		/* if analog and digital are currently off, anything should go,
+		 * so this entry describes everything we can do... */
+		.formats = SNDRV_PCM_FMTBIT_S8 |
+			   SNDRV_PCM_FMTBIT_S16_BE |
+			   SNDRV_PCM_FMTBIT_S24_BE
+#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
+			   | SNDRV_PCM_FMTBIT_COMPRESSED_16BE
+#endif
+		,
+		.rates = SNDRV_PCM_RATE_8000_96000,
+		.tag = 0,
+	},
+	{
+		/* analog output */
+		.formats = SNDRV_PCM_FMTBIT_S8 |
+			   SNDRV_PCM_FMTBIT_S16_BE |
+			   SNDRV_PCM_FMTBIT_S24_BE,
+		.rates = SNDRV_PCM_RATE_8000_96000,
+		.transfer_in = 0,
+		.must_be_clock_source = 0,
+		.tag = 1,
+	},
+	{
+		/* digital pcm output, also possible for analog out */
+		.formats = SNDRV_PCM_FMTBIT_S8 |
+			   SNDRV_PCM_FMTBIT_S16_BE |
+			   SNDRV_PCM_FMTBIT_S24_BE,
+		.rates = SNDRV_PCM_RATE_32000 |
+			 SNDRV_PCM_RATE_44100 |
+			 SNDRV_PCM_RATE_48000,
+		.transfer_in = 0,
+		.must_be_clock_source = 0,
+		.tag = 2,
+	},
+#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
+	/* Once alsa gets supports for this kind of thing we can add it... */
+	{
+		/* digital compressed output */
+		.formats =  SNDRV_PCM_FMTBIT_COMPRESSED_16BE,
+		.rates = SNDRV_PCM_RATE_32000 |
+			 SNDRV_PCM_RATE_44100 |
+			 SNDRV_PCM_RATE_48000,
+		.tag = 2,
+	},
+#endif
+	{}
+};
+
+static int onyx_usable(struct codec_info_item *cii,
+		       struct transfer_info *ti,
+		       struct transfer_info *out)
+{
+	u8 v;
+	struct onyx *onyx = cii->codec_data;
+	int spdif_enabled, analog_enabled;
+
+	mutex_lock(&onyx->mutex);
+	onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
+	spdif_enabled = !!(v & ONYX_SPDIF_ENABLE);
+	onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
+	analog_enabled =
+		(v & (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT))
+		 != (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT);
+	mutex_unlock(&onyx->mutex);
+
+	switch (ti->tag) {
+	case 0: return 1;
+	case 1:	return analog_enabled;
+	case 2: return spdif_enabled;
+	}
+	return 1;
+}
+
+static int onyx_prepare(struct codec_info_item *cii,
+			struct bus_info *bi,
+			struct snd_pcm_substream *substream)
+{
+	u8 v;
+	struct onyx *onyx = cii->codec_data;
+	int err = -EBUSY;
+
+	mutex_lock(&onyx->mutex);
+
+#ifdef SNDRV_PCM_FMTBIT_COMPRESSED_16BE
+	if (substream->runtime->format == SNDRV_PCM_FMTBIT_COMPRESSED_16BE) {
+		/* mute and lock analog output */
+		onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
+		if (onyx_write_register(onyx,
+					ONYX_REG_DAC_CONTROL,
+					v | ONYX_MUTE_RIGHT | ONYX_MUTE_LEFT))
+			goto out_unlock;
+		onyx->analog_locked = 1;
+		err = 0;
+		goto out_unlock;
+	}
+#endif
+	switch (substream->runtime->rate) {
+	case 32000:
+	case 44100:
+	case 48000:
+		/* these rates are ok for all outputs */
+		/* FIXME: program spdif channel control bits here so that
+		 *	  userspace doesn't have to if it only plays pcm! */
+		err = 0;
+		goto out_unlock;
+	default:
+		/* got some rate that the digital output can't do,
+		 * so disable and lock it */
+		onyx_read_register(cii->codec_data, ONYX_REG_DIG_INFO4, &v);
+		if (onyx_write_register(onyx,
+					ONYX_REG_DIG_INFO4,
+					v & ~ONYX_SPDIF_ENABLE))
+			goto out_unlock;
+		onyx->spdif_locked = 1;
+		err = 0;
+		goto out_unlock;
+	}
+
+ out_unlock:
+	mutex_unlock(&onyx->mutex);
+
+	return err;
+}
+
+static int onyx_open(struct codec_info_item *cii,
+		     struct snd_pcm_substream *substream)
+{
+	struct onyx *onyx = cii->codec_data;
+
+	mutex_lock(&onyx->mutex);
+	onyx->open_count++;
+	mutex_unlock(&onyx->mutex);
+
+	return 0;
+}
+
+static int onyx_close(struct codec_info_item *cii,
+		      struct snd_pcm_substream *substream)
+{
+	struct onyx *onyx = cii->codec_data;
+
+	mutex_lock(&onyx->mutex);
+	onyx->open_count--;
+	if (!onyx->open_count)
+		onyx->spdif_locked = onyx->analog_locked = 0;
+	mutex_unlock(&onyx->mutex);
+
+	return 0;
+}
+
+static int onyx_switch_clock(struct codec_info_item *cii,
+			     enum clock_switch what)
+{
+	struct onyx *onyx = cii->codec_data;
+
+	mutex_lock(&onyx->mutex);
+	/* this *MUST* be more elaborate later... */
+	switch (what) {
+	case CLOCK_SWITCH_PREPARE_SLAVE:
+		onyx->codec.gpio->methods->all_amps_off(onyx->codec.gpio);
+		break;
+	case CLOCK_SWITCH_SLAVE:
+		onyx->codec.gpio->methods->all_amps_restore(onyx->codec.gpio);
+		break;
+	default: /* silence warning */
+		break;
+	}
+	mutex_unlock(&onyx->mutex);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int onyx_suspend(struct codec_info_item *cii, pm_message_t state)
+{
+	struct onyx *onyx = cii->codec_data;
+	u8 v;
+	int err = -ENXIO;
+
+	mutex_lock(&onyx->mutex);
+	if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v))
+		goto out_unlock;
+	onyx_write_register(onyx, ONYX_REG_CONTROL, v | ONYX_ADPSV | ONYX_DAPSV);
+	/* Apple does a sleep here but the datasheet says to do it on resume */
+	err = 0;
+ out_unlock:
+	mutex_unlock(&onyx->mutex);
+
+	return err;
+}
+
+static int onyx_resume(struct codec_info_item *cii)
+{
+	struct onyx *onyx = cii->codec_data;
+	u8 v;
+	int err = -ENXIO;
+
+	mutex_lock(&onyx->mutex);
+
+	/* reset codec */
+	onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
+	msleep(1);
+	onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 1);
+	msleep(1);
+	onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
+	msleep(1);
+
+	/* take codec out of suspend (if it still is after reset) */
+	if (onyx_read_register(onyx, ONYX_REG_CONTROL, &v))
+		goto out_unlock;
+	onyx_write_register(onyx, ONYX_REG_CONTROL, v & ~(ONYX_ADPSV | ONYX_DAPSV));
+	/* FIXME: should divide by sample rate, but 8k is the lowest we go */
+	msleep(2205000/8000);
+	/* reset all values */
+	onyx_register_init(onyx);
+	err = 0;
+ out_unlock:
+	mutex_unlock(&onyx->mutex);
+
+	return err;
+}
+
+#endif /* CONFIG_PM */
+
+static struct codec_info onyx_codec_info = {
+	.transfers = onyx_transfers,
+	.sysclock_factor = 256,
+	.bus_factor = 64,
+	.owner = THIS_MODULE,
+	.usable = onyx_usable,
+	.prepare = onyx_prepare,
+	.open = onyx_open,
+	.close = onyx_close,
+	.switch_clock = onyx_switch_clock,
+#ifdef CONFIG_PM
+	.suspend = onyx_suspend,
+	.resume = onyx_resume,
+#endif
+};
+
+static int onyx_init_codec(struct aoa_codec *codec)
+{
+	struct onyx *onyx = codec_to_onyx(codec);
+	struct snd_kcontrol *ctl;
+	struct codec_info *ci = &onyx_codec_info;
+	u8 v;
+	int err;
+
+	if (!onyx->codec.gpio || !onyx->codec.gpio->methods) {
+		printk(KERN_ERR PFX "gpios not assigned!!\n");
+		return -EINVAL;
+	}
+
+	onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
+	msleep(1);
+	onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 1);
+	msleep(1);
+	onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
+	msleep(1);
+
+	if (onyx_register_init(onyx)) {
+		printk(KERN_ERR PFX "failed to initialise onyx registers\n");
+		return -ENODEV;
+	}
+
+	if (aoa_snd_device_new(SNDRV_DEV_LOWLEVEL, onyx, &ops)) {
+		printk(KERN_ERR PFX "failed to create onyx snd device!\n");
+		return -ENODEV;
+	}
+
+	/* nothing connected? what a joke! */
+	if ((onyx->codec.connected & 0xF) == 0)
+		return -ENOTCONN;
+
+	/* if no inputs are present... */
+	if ((onyx->codec.connected & 0xC) == 0) {
+		if (!onyx->codec_info)
+			onyx->codec_info = kmalloc(sizeof(struct codec_info), GFP_KERNEL);
+		if (!onyx->codec_info)
+			return -ENOMEM;
+		ci = onyx->codec_info;
+		*ci = onyx_codec_info;
+		ci->transfers++;
+	}
+
+	/* if no outputs are present... */
+	if ((onyx->codec.connected & 3) == 0) {
+		if (!onyx->codec_info)
+			onyx->codec_info = kmalloc(sizeof(struct codec_info), GFP_KERNEL);
+		if (!onyx->codec_info)
+			return -ENOMEM;
+		ci = onyx->codec_info;
+		/* this is fine as there have to be inputs
+		 * if we end up in this part of the code */
+		*ci = onyx_codec_info;
+		ci->transfers[1].formats = 0;
+	}
+
+	if (onyx->codec.soundbus_dev->attach_codec(onyx->codec.soundbus_dev,
+						   aoa_get_card(),
+						   ci, onyx)) {
+		printk(KERN_ERR PFX "error creating onyx pcm\n");
+		return -ENODEV;
+	}
+#define ADDCTL(n)							\
+	do {								\
+		ctl = snd_ctl_new1(&n, onyx);				\
+		if (ctl) {						\
+			ctl->id.device =				\
+				onyx->codec.soundbus_dev->pcm->device;	\
+			err = aoa_snd_ctl_add(ctl);			\
+			if (err)					\
+				goto error;				\
+		}							\
+	} while (0)
+
+	if (onyx->codec.soundbus_dev->pcm) {
+		/* give the user appropriate controls
+		 * depending on what inputs are connected */
+		if ((onyx->codec.connected & 0xC) == 0xC)
+			ADDCTL(capture_source_control);
+		else if (onyx->codec.connected & 4)
+			onyx_set_capture_source(onyx, 0);
+		else
+			onyx_set_capture_source(onyx, 1);
+		if (onyx->codec.connected & 0xC)
+			ADDCTL(inputgain_control);
+
+		/* depending on what output is connected,
+		 * give the user appropriate controls */
+		if (onyx->codec.connected & 1) {
+			ADDCTL(volume_control);
+			ADDCTL(mute_control);
+			ADDCTL(ovr1_control);
+			ADDCTL(flt0_control);
+			ADDCTL(hpf_control);
+			ADDCTL(dm12_control);
+			/* spdif control defaults to off */
+		}
+		if (onyx->codec.connected & 2) {
+			ADDCTL(onyx_spdif_mask);
+			ADDCTL(onyx_spdif_ctrl);
+		}
+		if ((onyx->codec.connected & 3) == 3)
+			ADDCTL(spdif_control);
+		/* if only S/PDIF is connected, enable it unconditionally */
+		if ((onyx->codec.connected & 3) == 2) {
+			onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
+			v |= ONYX_SPDIF_ENABLE;
+			onyx_write_register(onyx, ONYX_REG_DIG_INFO4, v);
+		}
+	}
+#undef ADDCTL
+	printk(KERN_INFO PFX "attached to onyx codec via i2c\n");
+
+	return 0;
+ error:
+	onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
+	snd_device_free(aoa_get_card(), onyx);
+	return err;
+}
+
+static void onyx_exit_codec(struct aoa_codec *codec)
+{
+	struct onyx *onyx = codec_to_onyx(codec);
+
+	if (!onyx->codec.soundbus_dev) {
+		printk(KERN_ERR PFX "onyx_exit_codec called without soundbus_dev!\n");
+		return;
+	}
+	onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
+}
+
+static struct i2c_driver onyx_driver;
+
+static int onyx_create(struct i2c_adapter *adapter,
+		       struct device_node *node,
+		       int addr)
+{
+	struct onyx *onyx;
+	u8 dummy;
+
+	onyx = kzalloc(sizeof(struct onyx), GFP_KERNEL);
+
+	if (!onyx)
+		return -ENOMEM;
+
+	mutex_init(&onyx->mutex);
+	onyx->i2c.driver = &onyx_driver;
+	onyx->i2c.adapter = adapter;
+	onyx->i2c.addr = addr & 0x7f;
+	strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE);
+
+	if (i2c_attach_client(&onyx->i2c)) {
+		printk(KERN_ERR PFX "failed to attach to i2c\n");
+		goto fail;
+	}
+
+	/* we try to read from register ONYX_REG_CONTROL
+	 * to check if the codec is present */
+	if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) {
+		i2c_detach_client(&onyx->i2c);
+		printk(KERN_ERR PFX "failed to read control register\n");
+		goto fail;
+	}
+
+	strlcpy(onyx->codec.name, "onyx", MAX_CODEC_NAME_LEN);
+	onyx->codec.owner = THIS_MODULE;
+	onyx->codec.init = onyx_init_codec;
+	onyx->codec.exit = onyx_exit_codec;
+	onyx->codec.node = of_node_get(node);
+
+	if (aoa_codec_register(&onyx->codec)) {
+		i2c_detach_client(&onyx->i2c);
+		goto fail;
+	}
+	printk(KERN_DEBUG PFX "created and attached onyx instance\n");
+	return 0;
+ fail:
+	kfree(onyx);
+	return -EINVAL;
+}
+
+static int onyx_i2c_attach(struct i2c_adapter *adapter)
+{
+	struct device_node *busnode, *dev = NULL;
+	struct pmac_i2c_bus *bus;
+
+	bus = pmac_i2c_adapter_to_bus(adapter);
+	if (bus == NULL)
+		return -ENODEV;
+	busnode = pmac_i2c_get_bus_node(bus);
+
+	while ((dev = of_get_next_child(busnode, dev)) != NULL) {
+		if (of_device_is_compatible(dev, "pcm3052")) {
+			const u32 *addr;
+			printk(KERN_DEBUG PFX "found pcm3052\n");
+			addr = of_get_property(dev, "reg", NULL);
+			if (!addr)
+				return -ENODEV;
+			return onyx_create(adapter, dev, (*addr)>>1);
+		}
+	}
+
+	/* if that didn't work, try desperate mode for older
+	 * machines that have stuff missing from the device tree */
+
+	if (!of_device_is_compatible(busnode, "k2-i2c"))
+		return -ENODEV;
+
+	printk(KERN_DEBUG PFX "found k2-i2c, checking if onyx chip is on it\n");
+	/* probe both possible addresses for the onyx chip */
+	if (onyx_create(adapter, NULL, 0x46) == 0)
+		return 0;
+	return onyx_create(adapter, NULL, 0x47);
+}
+
+static int onyx_i2c_detach(struct i2c_client *client)
+{
+	struct onyx *onyx = container_of(client, struct onyx, i2c);
+	int err;
+
+	if ((err = i2c_detach_client(client)))
+		return err;
+	aoa_codec_unregister(&onyx->codec);
+	of_node_put(onyx->codec.node);
+	if (onyx->codec_info)
+		kfree(onyx->codec_info);
+	kfree(onyx);
+	return 0;
+}
+
+static struct i2c_driver onyx_driver = {
+	.driver = {
+		.name = "aoa_codec_onyx",
+		.owner = THIS_MODULE,
+	},
+	.attach_adapter = onyx_i2c_attach,
+	.detach_client = onyx_i2c_detach,
+};
+
+static int __init onyx_init(void)
+{
+	return i2c_add_driver(&onyx_driver);
+}
+
+static void __exit onyx_exit(void)
+{
+	i2c_del_driver(&onyx_driver);
+}
+
+module_init(onyx_init);
+module_exit(onyx_exit);