aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/cpufreq/Kconfig.arm22
-rw-r--r--drivers/cpufreq/Makefile1
-rw-r--r--drivers/cpufreq/s3c2416-cpufreq.c542
3 files changed, 565 insertions, 0 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index c8bde43281c..dc59abf3360 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -2,6 +2,28 @@
# ARM CPU Frequency scaling drivers
#
+config ARM_S3C2416_CPUFREQ
+ bool "S3C2416 CPU Frequency scaling support"
+ depends on CPU_S3C2416
+ help
+ This adds the CPUFreq driver for the Samsung S3C2416 and
+ S3C2450 SoC. The S3C2416 supports changing the rate of the
+ armdiv clock source and also entering a so called dynamic
+ voltage scaling mode in which it is possible to reduce the
+ core voltage of the cpu.
+
+ If in doubt, say N.
+
+config ARM_S3C2416_CPUFREQ_VCORESCALE
+ bool "Allow voltage scaling for S3C2416 arm core (EXPERIMENTAL)"
+ depends on ARM_S3C2416_CPUFREQ && REGULATOR && EXPERIMENTAL
+ help
+ Enable CPU voltage scaling when entering the dvs mode.
+ It uses information gathered through existing hardware and
+ tests but not documented in any datasheet.
+
+ If in doubt, say N.
+
config ARM_S3C64XX_CPUFREQ
bool "Samsung S3C64XX"
depends on CPU_S3C6410
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index ac000fa76bb..042fbaeb140 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
##################################################################################
# ARM SoC drivers
obj-$(CONFIG_UX500_SOC_DB8500) += db8500-cpufreq.o
+obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
new file mode 100644
index 00000000000..50d2f15a3c8
--- /dev/null
+++ b/drivers/cpufreq/s3c2416-cpufreq.c
@@ -0,0 +1,542 @@
+/*
+ * S3C2416/2450 CPUfreq Support
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on s3c64xx_cpufreq.c
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reboot.h>
+#include <linux/module.h>
+
+static DEFINE_MUTEX(cpufreq_lock);
+
+struct s3c2416_data {
+ struct clk *armdiv;
+ struct clk *armclk;
+ struct clk *hclk;
+
+ unsigned long regulator_latency;
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ struct regulator *vddarm;
+#endif
+
+ struct cpufreq_frequency_table *freq_table;
+
+ bool is_dvs;
+ bool disable_dvs;
+};
+
+static struct s3c2416_data s3c2416_cpufreq;
+
+struct s3c2416_dvfs {
+ unsigned int vddarm_min;
+ unsigned int vddarm_max;
+};
+
+/* pseudo-frequency for dvs mode */
+#define FREQ_DVS 132333
+
+/* frequency to sleep and reboot in
+ * it's essential to leave dvs, as some boards do not reconfigure the
+ * regulator on reboot
+ */
+#define FREQ_SLEEP 133333
+
+/* Sources for the ARMCLK */
+#define SOURCE_HCLK 0
+#define SOURCE_ARMDIV 1
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+/* S3C2416 only supports changing the voltage in the dvs-mode.
+ * Voltages down to 1.0V seem to work, so we take what the regulator
+ * can get us.
+ */
+static struct s3c2416_dvfs s3c2416_dvfs_table[] = {
+ [SOURCE_HCLK] = { 950000, 1250000 },
+ [SOURCE_ARMDIV] = { 1250000, 1350000 },
+};
+#endif
+
+static struct cpufreq_frequency_table s3c2416_freq_table[] = {
+ { SOURCE_HCLK, FREQ_DVS },
+ { SOURCE_ARMDIV, 133333 },
+ { SOURCE_ARMDIV, 266666 },
+ { SOURCE_ARMDIV, 400000 },
+ { 0, CPUFREQ_TABLE_END },
+};
+
+static struct cpufreq_frequency_table s3c2450_freq_table[] = {
+ { SOURCE_HCLK, FREQ_DVS },
+ { SOURCE_ARMDIV, 133500 },
+ { SOURCE_ARMDIV, 267000 },
+ { SOURCE_ARMDIV, 534000 },
+ { 0, CPUFREQ_TABLE_END },
+};
+
+static int s3c2416_cpufreq_verify_speed(struct cpufreq_policy *policy)
+{
+ struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ return cpufreq_frequency_table_verify(policy, s3c_freq->freq_table);
+}
+
+static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu)
+{
+ struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+
+ if (cpu != 0)
+ return 0;
+
+ /* return our pseudo-frequency when in dvs mode */
+ if (s3c_freq->is_dvs)
+ return FREQ_DVS;
+
+ return clk_get_rate(s3c_freq->armclk) / 1000;
+}
+
+static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq,
+ unsigned int freq)
+{
+ int ret;
+
+ if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) {
+ ret = clk_set_rate(s3c_freq->armdiv, freq * 1000);
+ if (ret < 0) {
+ pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n",
+ freq, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx)
+{
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ struct s3c2416_dvfs *dvfs;
+#endif
+ int ret;
+
+ if (s3c_freq->is_dvs) {
+ pr_debug("cpufreq: already in dvs mode, nothing to do\n");
+ return 0;
+ }
+
+ pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n",
+ clk_get_rate(s3c_freq->hclk) / 1000);
+ ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk);
+ if (ret < 0) {
+ pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret);
+ return ret;
+ }
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ /* changing the core voltage is only allowed when in dvs mode */
+ if (s3c_freq->vddarm) {
+ dvfs = &s3c2416_dvfs_table[idx];
+
+ pr_debug("cpufreq: setting regultor to %d-%d\n",
+ dvfs->vddarm_min, dvfs->vddarm_max);
+ ret = regulator_set_voltage(s3c_freq->vddarm,
+ dvfs->vddarm_min,
+ dvfs->vddarm_max);
+
+ /* when lowering the voltage failed, there is nothing to do */
+ if (ret != 0)
+ pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
+ }
+#endif
+
+ s3c_freq->is_dvs = 1;
+
+ return 0;
+}
+
+static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx)
+{
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ struct s3c2416_dvfs *dvfs;
+#endif
+ int ret;
+
+ if (!s3c_freq->is_dvs) {
+ pr_debug("cpufreq: not in dvs mode, so can't leave\n");
+ return 0;
+ }
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ if (s3c_freq->vddarm) {
+ dvfs = &s3c2416_dvfs_table[idx];
+
+ pr_debug("cpufreq: setting regultor to %d-%d\n",
+ dvfs->vddarm_min, dvfs->vddarm_max);
+ ret = regulator_set_voltage(s3c_freq->vddarm,
+ dvfs->vddarm_min,
+ dvfs->vddarm_max);
+ if (ret != 0) {
+ pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
+ return ret;
+ }
+ }
+#endif
+
+ /* force armdiv to hclk frequency for transition from dvs*/
+ if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) {
+ pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n",
+ clk_get_rate(s3c_freq->hclk) / 1000);
+ ret = s3c2416_cpufreq_set_armdiv(s3c_freq,
+ clk_get_rate(s3c_freq->hclk) / 1000);
+ if (ret < 0) {
+ pr_err("cpufreq: Failed to to set the armdiv to %lukHz: %d\n",
+ clk_get_rate(s3c_freq->hclk) / 1000, ret);
+ return ret;
+ }
+ }
+
+ pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n",
+ clk_get_rate(s3c_freq->armdiv) / 1000);
+
+ ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv);
+ if (ret < 0) {
+ pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n",
+ ret);
+ return ret;
+ }
+
+ s3c_freq->is_dvs = 0;
+
+ return 0;
+}
+
+static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+ struct cpufreq_freqs freqs;
+ int idx, ret, to_dvs = 0;
+ unsigned int i;
+
+ mutex_lock(&cpufreq_lock);
+
+ pr_debug("cpufreq: to %dKHz, relation %d\n", target_freq, relation);
+
+ ret = cpufreq_frequency_table_target(policy, s3c_freq->freq_table,
+ target_freq, relation, &i);
+ if (ret != 0)
+ goto out;
+
+ idx = s3c_freq->freq_table[i].index;
+
+ if (idx == SOURCE_HCLK)
+ to_dvs = 1;
+
+ /* switching to dvs when it's not allowed */
+ if (to_dvs && s3c_freq->disable_dvs) {
+ pr_debug("cpufreq: entering dvs mode not allowed\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ freqs.cpu = 0;
+ freqs.flags = 0;
+ freqs.old = s3c_freq->is_dvs ? FREQ_DVS
+ : clk_get_rate(s3c_freq->armclk) / 1000;
+
+ /* When leavin dvs mode, always switch the armdiv to the hclk rate
+ * The S3C2416 has stability issues when switching directly to
+ * higher frequencies.
+ */
+ freqs.new = (s3c_freq->is_dvs && !to_dvs)
+ ? clk_get_rate(s3c_freq->hclk) / 1000
+ : s3c_freq->freq_table[i].frequency;
+
+ pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
+
+ if (!to_dvs && freqs.old == freqs.new)
+ goto out;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ if (to_dvs) {
+ pr_debug("cpufreq: enter dvs\n");
+ ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx);
+ } else if (s3c_freq->is_dvs) {
+ pr_debug("cpufreq: leave dvs\n");
+ ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx);
+ } else {
+ pr_debug("cpufreq: change armdiv to %dkHz\n", freqs.new);
+ ret = s3c2416_cpufreq_set_armdiv(s3c_freq, freqs.new);
+ }
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+out:
+ mutex_unlock(&cpufreq_lock);
+
+ return ret;
+}
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
+{
+ int count, v, i, found;
+ struct cpufreq_frequency_table *freq;
+ struct s3c2416_dvfs *dvfs;
+
+ count = regulator_count_voltages(s3c_freq->vddarm);
+ if (count < 0) {
+ pr_err("cpufreq: Unable to check supported voltages\n");
+ return;
+ }
+
+ freq = s3c_freq->freq_table;
+ while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
+ if (freq->frequency == CPUFREQ_ENTRY_INVALID)
+ continue;
+
+ dvfs = &s3c2416_dvfs_table[freq->index];
+ found = 0;
+
+ /* Check only the min-voltage, more is always ok on S3C2416 */
+ for (i = 0; i < count; i++) {
+ v = regulator_list_voltage(s3c_freq->vddarm, i);
+ if (v >= dvfs->vddarm_min)
+ found = 1;
+ }
+
+ if (!found) {
+ pr_debug("cpufreq: %dkHz unsupported by regulator\n",
+ freq->frequency);
+ freq->frequency = CPUFREQ_ENTRY_INVALID;
+ }
+
+ freq++;
+ }
+
+ /* Guessed */
+ s3c_freq->regulator_latency = 1 * 1000 * 1000;
+}
+#endif
+
+static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+ int ret;
+
+ mutex_lock(&cpufreq_lock);
+
+ /* disable further changes */
+ s3c_freq->disable_dvs = 1;
+
+ mutex_unlock(&cpufreq_lock);
+
+ /* some boards don't reconfigure the regulator on reboot, which
+ * could lead to undervolting the cpu when the clock is reset.
+ * Therefore we always leave the DVS mode on reboot.
+ */
+ if (s3c_freq->is_dvs) {
+ pr_debug("cpufreq: leave dvs on reboot\n");
+ ret = cpufreq_driver_target(cpufreq_cpu_get(0), FREQ_SLEEP, 0);
+ if (ret < 0)
+ return NOTIFY_BAD;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block s3c2416_cpufreq_reboot_notifier = {
+ .notifier_call = s3c2416_cpufreq_reboot_notifier_evt,
+};
+
+static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
+{
+ struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+ struct cpufreq_frequency_table *freq;
+ struct clk *msysclk;
+ unsigned long rate;
+ int ret;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ msysclk = clk_get(NULL, "msysclk");
+ if (IS_ERR(msysclk)) {
+ ret = PTR_ERR(msysclk);
+ pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * S3C2416 and S3C2450 share the same processor-ID and also provide no
+ * other means to distinguish them other than through the rate of
+ * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz.
+ */
+ rate = clk_get_rate(msysclk);
+ if (rate == 800 * 1000 * 1000) {
+ pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n",
+ rate / 1000);
+ s3c_freq->freq_table = s3c2416_freq_table;
+ policy->cpuinfo.max_freq = 400000;
+ } else if (rate / 1000 == 534000) {
+ pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n",
+ rate / 1000);
+ s3c_freq->freq_table = s3c2450_freq_table;
+ policy->cpuinfo.max_freq = 534000;
+ }
+
+ /* not needed anymore */
+ clk_put(msysclk);
+
+ if (s3c_freq->freq_table == NULL) {
+ pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n",
+ rate / 1000);
+ return -ENODEV;
+ }
+
+ s3c_freq->is_dvs = 0;
+
+ s3c_freq->armdiv = clk_get(NULL, "armdiv");
+ if (IS_ERR(s3c_freq->armdiv)) {
+ ret = PTR_ERR(s3c_freq->armdiv);
+ pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret);
+ return ret;
+ }
+
+ s3c_freq->hclk = clk_get(NULL, "hclk");
+ if (IS_ERR(s3c_freq->hclk)) {
+ ret = PTR_ERR(s3c_freq->hclk);
+ pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret);
+ goto err_hclk;
+ }
+
+ /* chech hclk rate, we only support the common 133MHz for now
+ * hclk could also run at 66MHz, but this not often used
+ */
+ rate = clk_get_rate(s3c_freq->hclk);
+ if (rate < 133 * 1000 * 1000) {
+ pr_err("cpufreq: HCLK not at 133MHz\n");
+ clk_put(s3c_freq->hclk);
+ ret = -EINVAL;
+ goto err_armclk;
+ }
+
+ s3c_freq->armclk = clk_get(NULL, "armclk");
+ if (IS_ERR(s3c_freq->armclk)) {
+ ret = PTR_ERR(s3c_freq->armclk);
+ pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret);
+ goto err_armclk;
+ }
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ s3c_freq->vddarm = regulator_get(NULL, "vddarm");
+ if (IS_ERR(s3c_freq->vddarm)) {
+ ret = PTR_ERR(s3c_freq->vddarm);
+ pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
+ goto err_vddarm;
+ }
+
+ s3c2416_cpufreq_cfg_regulator(s3c_freq);
+#else
+ s3c_freq->regulator_latency = 0;
+#endif
+
+ freq = s3c_freq->freq_table;
+ while (freq->frequency != CPUFREQ_TABLE_END) {
+ /* special handling for dvs mode */
+ if (freq->index == 0) {
+ if (!s3c_freq->hclk) {
+ pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
+ freq->frequency);
+ freq->frequency = CPUFREQ_ENTRY_INVALID;
+ } else {
+ freq++;
+ continue;
+ }
+ }
+
+ /* Check for frequencies we can generate */
+ rate = clk_round_rate(s3c_freq->armdiv,
+ freq->frequency * 1000);
+ rate /= 1000;
+ if (rate != freq->frequency) {
+ pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
+ freq->frequency, rate);
+ freq->frequency = CPUFREQ_ENTRY_INVALID;
+ }
+
+ freq++;
+ }
+
+ policy->cur = clk_get_rate(s3c_freq->armclk) / 1000;
+
+ /* Datasheet says PLL stabalisation time must be at least 300us,
+ * so but add some fudge. (reference in LOCKCON0 register description)
+ */
+ policy->cpuinfo.transition_latency = (500 * 1000) +
+ s3c_freq->regulator_latency;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, s3c_freq->freq_table);
+ if (ret)
+ goto err_freq_table;
+
+ cpufreq_frequency_table_get_attr(s3c_freq->freq_table, 0);
+
+ register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier);
+
+ return 0;
+
+err_freq_table:
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+ regulator_put(s3c_freq->vddarm);
+err_vddarm:
+#endif
+ clk_put(s3c_freq->armclk);
+err_armclk:
+ clk_put(s3c_freq->hclk);
+err_hclk:
+ clk_put(s3c_freq->armdiv);
+
+ return ret;
+}
+
+static struct freq_attr *s3c2416_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver s3c2416_cpufreq_driver = {
+ .owner = THIS_MODULE,
+ .flags = 0,
+ .verify = s3c2416_cpufreq_verify_speed,
+ .target = s3c2416_cpufreq_set_target,
+ .get = s3c2416_cpufreq_get_speed,
+ .init = s3c2416_cpufreq_driver_init,
+ .name = "s3c2416",
+ .attr = s3c2416_cpufreq_attr,
+};
+
+static int __init s3c2416_cpufreq_init(void)
+{
+ return cpufreq_register_driver(&s3c2416_cpufreq_driver);
+}
+module_init(s3c2416_cpufreq_init);