aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/tty/serial/8250/8250_core.c (renamed from drivers/tty/serial/8250/8250.c)6
-rw-r--r--drivers/tty/serial/8250/8250_pci.c13
-rw-r--r--drivers/tty/serial/8250/Kconfig17
-rw-r--r--drivers/tty/serial/8250/Makefile8
-rw-r--r--drivers/tty/serial/atmel_serial.c11
-rw-r--r--drivers/tty/serial/xilinx_uartps.c2
6 files changed, 45 insertions, 12 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250_core.c
index cf6a5383748..35f9c96aada 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -3418,6 +3418,7 @@ MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
#endif
MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
#ifndef MODULE
/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name
* working as well for the module options so we don't break people. We
@@ -3432,7 +3433,7 @@ MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
static void __used s8250_options(void)
{
#undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "8250."
+#define MODULE_PARAM_PREFIX "8250_core."
module_param_cb(share_irqs, &param_ops_uint, &share_irqs, 0644);
module_param_cb(nr_uarts, &param_ops_uint, &nr_uarts, 0644);
@@ -3444,5 +3445,6 @@ static void __used s8250_options(void)
#endif
}
#else
-MODULE_ALIAS("8250");
+MODULE_ALIAS("8250_core");
+#endif
#endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index aa76825229d..26e3a97ab15 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1554,6 +1554,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
#define PCI_VENDOR_ID_WCH 0x4348
+#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253
#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
@@ -2172,6 +2173,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
+ /* WCH CH352 2S card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH352_2S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
/*
* ASIX devices with FIFO bug
*/
@@ -4870,6 +4879,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_WCH, PCI_DEVICE_ID_WCH_CH352_2S,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_b0_bt_2_115200 },
+
/*
* Commtech, Inc. Fastcom adapters
*/
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 2ef9537bcb2..80fe91e64a5 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -33,6 +33,23 @@ config SERIAL_8250
Most people will say Y or M here, so that they can use serial mice,
modems and similar devices connecting to the standard serial ports.
+config SERIAL_8250_DEPRECATED_OPTIONS
+ bool "Support 8250_core.* kernel options (DEPRECATED)"
+ depends on SERIAL_8250
+ default y
+ ---help---
+ In 3.7 we renamed 8250 to 8250_core by mistake, so now we have to
+ accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
+ 8250.nr_uarts=4. We now renamed the module back to 8250, but if
+ anybody noticed in 3.7 and changed their userspace we still have to
+ keep the 8350_core.* options around until they revert the changes
+ they already did.
+
+ If 8250 is built as a module, this adds 8250_core alias instead.
+
+ If you did not notice yet and/or you have userspace from pre-3.7, it
+ is safe (and recommended) to say N here.
+
config SERIAL_8250_PNP
bool "8250/16550 PNP device support" if EXPERT
depends on SERIAL_8250 && PNP
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index a23838a4d53..36d68d05430 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -2,10 +2,10 @@
# Makefile for the 8250 serial device drivers.
#
-obj-$(CONFIG_SERIAL_8250) += 8250_core.o
-8250_core-y := 8250.o
-8250_core-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
-8250_core-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
+obj-$(CONFIG_SERIAL_8250) += 8250.o
+8250-y := 8250_core.o
+8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
+8250-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index d4a7c241b75..3467462869c 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -158,7 +158,7 @@ struct atmel_uart_port {
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
-static unsigned long atmel_ports_in_use;
+static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
#ifdef SUPPORT_SYSRQ
static struct console atmel_console;
@@ -1769,15 +1769,14 @@ static int atmel_serial_probe(struct platform_device *pdev)
if (ret < 0)
/* port id not found in platform data nor device-tree aliases:
* auto-enumerate it */
- ret = find_first_zero_bit(&atmel_ports_in_use,
- sizeof(atmel_ports_in_use));
+ ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART);
- if (ret > ATMEL_MAX_UART) {
+ if (ret >= ATMEL_MAX_UART) {
ret = -ENODEV;
goto err;
}
- if (test_and_set_bit(ret, &atmel_ports_in_use)) {
+ if (test_and_set_bit(ret, atmel_ports_in_use)) {
/* port already in use */
ret = -EBUSY;
goto err;
@@ -1857,7 +1856,7 @@ static int atmel_serial_remove(struct platform_device *pdev)
/* "port" is allocated statically, so we shouldn't free it */
- clear_bit(port->line, &atmel_ports_in_use);
+ clear_bit(port->line, atmel_ports_in_use);
clk_put(atmel_port->clk);
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index ba451c7209f..f36bbba1ac8 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -578,6 +578,8 @@ static int xuartps_startup(struct uart_port *port)
/* Receive Timeout register is enabled with value of 10 */
xuartps_writel(10, XUARTPS_RXTOUT_OFFSET);
+ /* Clear out any pending interrupts before enabling them */
+ xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
/* Set the Interrupt Registers with desired interrupts */
xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-21 17:56:30 +0000