aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/insignal-boards.txt8
-rw-r--r--Documentation/devicetree/bindings/arm/samsung-boards.txt8
-rw-r--r--Documentation/devicetree/bindings/dma/arm-pl330.txt30
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-samsung.txt40
-rw-r--r--Documentation/devicetree/bindings/input/samsung-keypad.txt88
-rw-r--r--Documentation/devicetree/bindings/rtc/s3c-rtc.txt20
-rw-r--r--Documentation/devicetree/bindings/serial/samsung_uart.txt14
-rw-r--r--Documentation/virtual/kvm/api.txt16
-rw-r--r--MAINTAINERS33
-rw-r--r--Makefile2
-rw-r--r--arch/arm/Kconfig60
-rw-r--r--arch/arm/Kconfig.debug45
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/boot/compressed/Makefile3
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts137
-rw-r--r--arch/arm/boot/dts/exynos4210-smdkv310.dts182
-rw-r--r--arch/arm/boot/dts/exynos4210.dtsi397
-rw-r--r--arch/arm/common/pl330.c124
-rw-r--r--arch/arm/common/timer-sp.c7
-rw-r--r--arch/arm/common/vic.c2
-rw-r--r--arch/arm/configs/imx_v4_v5_defconfig12
-rw-r--r--arch/arm/configs/pcontrol_g20_defconfig175
-rw-r--r--arch/arm/include/asm/bug.h1
-rw-r--r--arch/arm/include/asm/edac.h48
-rw-r--r--arch/arm/include/asm/gpio.h4
-rw-r--r--arch/arm/include/asm/hardirq.h17
-rw-r--r--arch/arm/include/asm/hardware/iop3xx.h1
-rw-r--r--arch/arm/include/asm/opcodes.h20
-rw-r--r--arch/arm/include/asm/pgtable.h8
-rw-r--r--arch/arm/include/asm/processor.h2
-rw-r--r--arch/arm/include/asm/sched_clock.h108
-rw-r--r--arch/arm/include/asm/setup.h6
-rw-r--r--arch/arm/include/asm/swab.h5
-rw-r--r--arch/arm/include/asm/system.h1
-rw-r--r--arch/arm/kernel/Makefile2
-rw-r--r--arch/arm/kernel/kprobes-test.c66
-rw-r--r--arch/arm/kernel/opcodes.c72
-rw-r--r--arch/arm/kernel/process.c10
-rw-r--r--arch/arm/kernel/sched_clock.c118
-rw-r--r--arch/arm/kernel/smp_twd.c95
-rw-r--r--arch/arm/kernel/swp_emulate.c16
-rw-r--r--arch/arm/kernel/tcm.c22
-rw-r--r--arch/arm/mach-at91/Kconfig24
-rw-r--r--arch/arm/mach-at91/at91cap9.c44
-rw-r--r--arch/arm/mach-at91/at91cap9_devices.c49
-rw-r--r--arch/arm/mach-at91/at91rm9200.c28
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c48
-rw-r--r--arch/arm/mach-at91/at91rm9200_time.c8
-rw-r--r--arch/arm/mach-at91/at91sam9260.c38
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c55
-rw-r--r--arch/arm/mach-at91/at91sam9261.c34
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c33
-rw-r--r--arch/arm/mach-at91/at91sam9263.c47
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c59
-rw-r--r--arch/arm/mach-at91/at91sam926x_time.c38
-rw-r--r--arch/arm/mach-at91/at91sam9_alt_reset.S9
-rw-r--r--arch/arm/mach-at91/at91sam9g45.c48
-rw-r--r--arch/arm/mach-at91/at91sam9g45_devices.c69
-rw-r--r--arch/arm/mach-at91/at91sam9rl.c38
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c43
-rw-r--r--arch/arm/mach-at91/board-1arm.c4
-rw-r--r--arch/arm/mach-at91/board-afeb-9260v1.c10
-rw-r--r--arch/arm/mach-at91/board-cam60.c8
-rw-r--r--arch/arm/mach-at91/board-cap9adk.c21
-rw-r--r--arch/arm/mach-at91/board-carmeva.c9
-rw-r--r--arch/arm/mach-at91/board-cpu9krea.c14
-rw-r--r--arch/arm/mach-at91/board-cpuat91.c7
-rw-r--r--arch/arm/mach-at91/board-csb337.c7
-rw-r--r--arch/arm/mach-at91/board-csb637.c4
-rw-r--r--arch/arm/mach-at91/board-dt.c3
-rw-r--r--arch/arm/mach-at91/board-eb9200.c11
-rw-r--r--arch/arm/mach-at91/board-ecbat91.c7
-rw-r--r--arch/arm/mach-at91/board-eco920.c7
-rw-r--r--arch/arm/mach-at91/board-flexibity.c5
-rw-r--r--arch/arm/mach-at91/board-foxg20.c9
-rw-r--r--arch/arm/mach-at91/board-gsia18s.c7
-rw-r--r--arch/arm/mach-at91/board-kafa.c4
-rw-r--r--arch/arm/mach-at91/board-kb9202.c8
-rw-r--r--arch/arm/mach-at91/board-neocore926.c9
-rw-r--r--arch/arm/mach-at91/board-pcontrol-g20.c8
-rw-r--r--arch/arm/mach-at91/board-picotux200.c5
-rw-r--r--arch/arm/mach-at91/board-qil-a9260.c18
-rw-r--r--arch/arm/mach-at91/board-rm9200dk.c13
-rw-r--r--arch/arm/mach-at91/board-rm9200ek.c5
-rw-r--r--arch/arm/mach-at91/board-rsi-ews.c4
-rw-r--r--arch/arm/mach-at91/board-sam9-l9260.c12
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c16
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c13
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c12
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c13
-rw-r--r--arch/arm/mach-at91/board-sam9m10g45ek.c8
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c9
-rw-r--r--arch/arm/mach-at91/board-snapper9260.c10
-rw-r--r--arch/arm/mach-at91/board-stamp9g20.c16
-rw-r--r--arch/arm/mach-at91/board-usb-a926x.c14
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c9
-rw-r--r--arch/arm/mach-at91/generic.h10
-rw-r--r--arch/arm/mach-at91/gpio.c85
-rw-r--r--arch/arm/mach-at91/include/mach/at91_aic.h48
-rw-r--r--arch/arm/mach-at91/include/mach/at91_dbgu.h2
-rw-r--r--arch/arm/mach-at91/include/mach/at91_pit.h8
-rw-r--r--arch/arm/mach-at91/include/mach/at91_rtc.h24
-rw-r--r--arch/arm/mach-at91/include/mach/at91_shdwc.h16
-rw-r--r--arch/arm/mach-at91/include/mach/at91cap9.h27
-rw-r--r--arch/arm/mach-at91/include/mach/at91rm9200.h14
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9260.h23
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9261.h20
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9263.h33
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9_smc.h17
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9g45.h30
-rw-r--r--arch/arm/mach-at91/include/mach/at91sam9rl.h29
-rw-r--r--arch/arm/mach-at91/include/mach/at91x40.h1
-rw-r--r--arch/arm/mach-at91/include/mach/board.h42
-rw-r--r--arch/arm/mach-at91/include/mach/debug-macro.S10
-rw-r--r--arch/arm/mach-at91/include/mach/entry-macro.S11
-rw-r--r--arch/arm/mach-at91/include/mach/gpio.h336
-rw-r--r--arch/arm/mach-at91/include/mach/hardware.h12
-rw-r--r--arch/arm/mach-at91/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-at91/include/mach/system.h9
-rw-r--r--arch/arm/mach-at91/include/mach/timex.h65
-rw-r--r--arch/arm/mach-at91/include/mach/uncompress.h6
-rw-r--r--arch/arm/mach-at91/irq.c38
-rw-r--r--arch/arm/mach-at91/pm.c11
-rw-r--r--arch/arm/mach-at91/sam9_smc.c62
-rw-r--r--arch/arm/mach-at91/sam9_smc.h3
-rw-r--r--arch/arm/mach-at91/setup.c26
-rw-r--r--arch/arm/mach-at91/soc.h1
-rw-r--r--arch/arm/mach-bcmring/arch.c25
-rw-r--r--arch/arm/mach-bcmring/include/mach/system.h26
-rw-r--r--arch/arm/mach-clps711x/autcpu12.c1
-rw-r--r--arch/arm/mach-clps711x/cdb89712.c1
-rw-r--r--arch/arm/mach-clps711x/ceiva.c1
-rw-r--r--arch/arm/mach-clps711x/clep7312.c1
-rw-r--r--arch/arm/mach-clps711x/common.c5
-rw-r--r--arch/arm/mach-clps711x/common.h1
-rw-r--r--arch/arm/mach-clps711x/edb7211-arch.c1
-rw-r--r--arch/arm/mach-clps711x/fortunet.c1
-rw-r--r--arch/arm/mach-clps711x/include/mach/system.h5
-rw-r--r--arch/arm/mach-clps711x/p720t.c1
-rw-r--r--arch/arm/mach-cns3xxx/cns3420vb.c1
-rw-r--r--arch/arm/mach-cns3xxx/core.h1
-rw-r--r--arch/arm/mach-cns3xxx/include/mach/system.h3
-rw-r--r--arch/arm/mach-cns3xxx/pm.c4
-rw-r--r--arch/arm/mach-davinci/board-da830-evm.c1
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c1
-rw-r--r--arch/arm/mach-davinci/board-dm355-evm.c1
-rw-r--r--arch/arm/mach-davinci/board-dm355-leopard.c1
-rw-r--r--arch/arm/mach-davinci/board-dm365-evm.c1
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c1
-rw-r--r--arch/arm/mach-davinci/board-dm646x-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-mityomapl138.c1
-rw-r--r--arch/arm/mach-davinci/board-neuros-osd2.c1
-rw-r--r--arch/arm/mach-davinci/board-omapl138-hawk.c1
-rw-r--r--arch/arm/mach-davinci/board-sffsdr.c1
-rw-r--r--arch/arm/mach-davinci/board-tnetv107x-evm.c1
-rw-r--r--arch/arm/mach-davinci/common.c3
-rw-r--r--arch/arm/mach-davinci/da830.c1
-rw-r--r--arch/arm/mach-davinci/da850.c1
-rw-r--r--arch/arm/mach-davinci/devices-da8xx.c5
-rw-r--r--arch/arm/mach-davinci/devices.c5
-rw-r--r--arch/arm/mach-davinci/dm355.c1
-rw-r--r--arch/arm/mach-davinci/dm365.c1
-rw-r--r--arch/arm/mach-davinci/dm644x.c1
-rw-r--r--arch/arm/mach-davinci/dm646x.c1
-rw-r--r--arch/arm/mach-davinci/include/mach/common.h3
-rw-r--r--arch/arm/mach-davinci/include/mach/da8xx.h1
-rw-r--r--arch/arm/mach-davinci/include/mach/dm646x.h53
-rw-r--r--arch/arm/mach-davinci/include/mach/system.h6
-rw-r--r--arch/arm/mach-davinci/include/mach/tnetv107x.h1
-rw-r--r--arch/arm/mach-davinci/tnetv107x.c7
-rw-r--r--arch/arm/mach-dove/cm-a510.c1
-rw-r--r--arch/arm/mach-dove/common.c16
-rw-r--r--arch/arm/mach-dove/common.h1
-rw-r--r--arch/arm/mach-dove/dove-db-setup.c1
-rw-r--r--arch/arm/mach-dove/include/mach/system.h19
-rw-r--r--arch/arm/mach-ebsa110/core.c6
-rw-r--r--arch/arm/mach-ebsa110/include/mach/system.h2
-rw-r--r--arch/arm/mach-ep93xx/adssphere.c1
-rw-r--r--arch/arm/mach-ep93xx/core.c12
-rw-r--r--arch/arm/mach-ep93xx/edb93xx.c8
-rw-r--r--arch/arm/mach-ep93xx/gesbc9312.c1
-rw-r--r--arch/arm/mach-ep93xx/include/mach/platform.h2
-rw-r--r--arch/arm/mach-ep93xx/include/mach/system.h15
-rw-r--r--arch/arm/mach-ep93xx/micro9.c4
-rw-r--r--arch/arm/mach-ep93xx/simone.c1
-rw-r--r--arch/arm/mach-ep93xx/snappercl15.c1
-rw-r--r--arch/arm/mach-ep93xx/ts72xx.c1
-rw-r--r--arch/arm/mach-ep93xx/vision_ep9307.c1
-rw-r--r--arch/arm/mach-exynos/Kconfig26
-rw-r--r--arch/arm/mach-exynos/Makefile13
-rw-r--r--arch/arm/mach-exynos/clock-exynos4210.c3
-rw-r--r--arch/arm/mach-exynos/clock-exynos4212.c3
-rw-r--r--arch/arm/mach-exynos/clock.c232
-rw-r--r--arch/arm/mach-exynos/common.c698
-rw-r--r--arch/arm/mach-exynos/common.h41
-rw-r--r--arch/arm/mach-exynos/cpu.c284
-rw-r--r--arch/arm/mach-exynos/dma.c229
-rw-r--r--arch/arm/mach-exynos/include/mach/irqs.h8
-rw-r--r--arch/arm/mach-exynos/include/mach/map.h12
-rw-r--r--arch/arm/mach-exynos/include/mach/system.h2
-rw-r--r--arch/arm/mach-exynos/init.c42
-rw-r--r--arch/arm/mach-exynos/irq-combiner.c124
-rw-r--r--arch/arm/mach-exynos/irq-eint.c237
-rw-r--r--arch/arm/mach-exynos/mach-armlex4210.c6
-rw-r--r--arch/arm/mach-exynos/mach-exynos4-dt.c85
-rw-r--r--arch/arm/mach-exynos/mach-nuri.c15
-rw-r--r--arch/arm/mach-exynos/mach-origen.c6
-rw-r--r--arch/arm/mach-exynos/mach-smdk4x12.c7
-rw-r--r--arch/arm/mach-exynos/mach-smdkv310.c11
-rw-r--r--arch/arm/mach-exynos/mach-universal_c210.c16
-rw-r--r--arch/arm/mach-exynos/pm.c24
-rw-r--r--arch/arm/mach-exynos/setup-sdhci.c22
-rw-r--r--arch/arm/mach-footbridge/cats-hw.c1
-rw-r--r--arch/arm/mach-footbridge/common.c27
-rw-r--r--arch/arm/mach-footbridge/common.h1
-rw-r--r--arch/arm/mach-footbridge/ebsa285.c1
-rw-r--r--arch/arm/mach-footbridge/include/mach/system.h56
-rw-r--r--arch/arm/mach-footbridge/netwinder-hw.c27
-rw-r--r--arch/arm/mach-footbridge/personal.c1
-rw-r--r--arch/arm/mach-h720x/common.c5
-rw-r--r--arch/arm/mach-h720x/common.h1
-rw-r--r--arch/arm/mach-h720x/h7201-eval.c1
-rw-r--r--arch/arm/mach-h720x/h7202-eval.c1
-rw-r--r--arch/arm/mach-h720x/include/mach/system.h6
-rw-r--r--arch/arm/mach-highbank/core.h1
-rw-r--r--arch/arm/mach-highbank/highbank.c1
-rw-r--r--arch/arm/mach-highbank/include/mach/system.h2
-rw-r--r--arch/arm/mach-highbank/system.c2
-rw-r--r--arch/arm/mach-imx/Kconfig10
-rw-r--r--arch/arm/mach-imx/Makefile4
-rw-r--r--arch/arm/mach-imx/clock-imx35.c20
-rw-r--r--arch/arm/mach-imx/clock-imx6q.c2
-rw-r--r--arch/arm/mach-imx/mach-apf9328.c1
-rw-r--r--arch/arm/mach-imx/mach-armadillo5x0.c1
-rw-r--r--arch/arm/mach-imx/mach-bug.c1
-rw-r--r--arch/arm/mach-imx/mach-cpuimx27.c1
-rw-r--r--arch/arm/mach-imx/mach-cpuimx35.c9
-rw-r--r--arch/arm/mach-imx/mach-eukrea_cpuimx25.c1
-rw-r--r--arch/arm/mach-imx/mach-imx27_visstrim_m10.c1
-rw-r--r--arch/arm/mach-imx/mach-imx27ipcam.c1
-rw-r--r--arch/arm/mach-imx/mach-imx27lite.c1
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c34
-rw-r--r--arch/arm/mach-imx/mach-kzm_arm11_01.c1
-rw-r--r--arch/arm/mach-imx/mach-mx1ads.c2
-rw-r--r--arch/arm/mach-imx/mach-mx21ads.c1
-rw-r--r--arch/arm/mach-imx/mach-mx25_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-mx27_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-mx27ads.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31ads.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31lilly.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31lite.c1
-rw-r--r--arch/arm/mach-imx/mach-mx31moboard.c1
-rw-r--r--arch/arm/mach-imx/mach-mx35_3ds.c1
-rw-r--r--arch/arm/mach-imx/mach-mxt_td60.c1
-rw-r--r--arch/arm/mach-imx/mach-pca100.c1
-rw-r--r--arch/arm/mach-imx/mach-pcm037.c1
-rw-r--r--arch/arm/mach-imx/mach-pcm038.c1
-rw-r--r--arch/arm/mach-imx/mach-pcm043.c1
-rw-r--r--arch/arm/mach-imx/mach-qong.c1
-rw-r--r--arch/arm/mach-imx/mach-scb9328.c1
-rw-r--r--arch/arm/mach-imx/mach-vpr200.c1
-rw-r--r--arch/arm/mach-imx/src.c23
-rw-r--r--arch/arm/mach-integrator/Kconfig4
-rw-r--r--arch/arm/mach-integrator/common.h1
-rw-r--r--arch/arm/mach-integrator/core.c27
-rw-r--r--arch/arm/mach-integrator/include/mach/system.h11
-rw-r--r--arch/arm/mach-integrator/integrator_ap.c1
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c1
-rw-r--r--arch/arm/mach-iop13xx/include/mach/iop13xx.h1
-rw-r--r--arch/arm/mach-iop13xx/include/mach/system.h14
-rw-r--r--arch/arm/mach-iop13xx/iq81340mc.c1
-rw-r--r--arch/arm/mach-iop13xx/iq81340sc.c1
-rw-r--r--arch/arm/mach-iop13xx/setup.c11
-rw-r--r--arch/arm/mach-iop32x/em7210.c1
-rw-r--r--arch/arm/mach-iop32x/glantank.c1
-rw-r--r--arch/arm/mach-iop32x/include/mach/system.h19
-rw-r--r--arch/arm/mach-iop32x/iq31244.c2
-rw-r--r--arch/arm/mach-iop32x/iq80321.c1
-rw-r--r--arch/arm/mach-iop32x/n2100.c9
-rw-r--r--arch/arm/mach-iop33x/include/mach/system.h10
-rw-r--r--arch/arm/mach-iop33x/iq80331.c1
-rw-r--r--arch/arm/mach-iop33x/iq80332.c1
-rw-r--r--arch/arm/mach-ixp2000/core.c4
-rw-r--r--arch/arm/mach-ixp2000/enp2611.c1
-rw-r--r--arch/arm/mach-ixp2000/include/mach/platform.h1
-rw-r--r--arch/arm/mach-ixp2000/include/mach/system.h33
-rw-r--r--arch/arm/mach-ixp2000/ixdp2400.c1
-rw-r--r--arch/arm/mach-ixp2000/ixdp2800.c1
-rw-r--r--arch/arm/mach-ixp2000/ixdp2x01.c32
-rw-r--r--arch/arm/mach-ixp23xx/core.c6
-rw-r--r--arch/arm/mach-ixp23xx/espresso.c1
-rw-r--r--arch/arm/mach-ixp23xx/include/mach/platform.h1
-rw-r--r--arch/arm/mach-ixp23xx/include/mach/system.h17
-rw-r--r--arch/arm/mach-ixp23xx/ixdp2351.c12
-rw-r--r--arch/arm/mach-ixp23xx/roadrunner.c1
-rw-r--r--arch/arm/mach-ixp4xx/avila-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/common.c36
-rw-r--r--arch/arm/mach-ixp4xx/coyote-setup.c2
-rw-r--r--arch/arm/mach-ixp4xx/dsmg600-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/fsg-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/gateway7001-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/goramo_mlr.c1
-rw-r--r--arch/arm/mach-ixp4xx/gtwx5715-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/platform.h1
-rw-r--r--arch/arm/mach-ixp4xx/include/mach/system.h25
-rw-r--r--arch/arm/mach-ixp4xx/ixdp425-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/omixp-setup.c3
-rw-r--r--arch/arm/mach-ixp4xx/vulcan-setup.c1
-rw-r--r--arch/arm/mach-ixp4xx/wg302v2-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/common.c16
-rw-r--r--arch/arm/mach-kirkwood/common.h1
-rw-r--r--arch/arm/mach-kirkwood/d2net_v2-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/db88f6281-bp-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/dockstar-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/guruplug-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/include/mach/system.h19
-rw-r--r--arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/netspace_v2-setup.c3
-rw-r--r--arch/arm/mach-kirkwood/netxbig_v2-setup.c2
-rw-r--r--arch/arm/mach-kirkwood/openrd-setup.c3
-rw-r--r--arch/arm/mach-kirkwood/rd88f6192-nas-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/rd88f6281-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/sheevaplug-setup.c8
-rw-r--r--arch/arm/mach-kirkwood/t5325-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/ts219-setup.c1
-rw-r--r--arch/arm/mach-kirkwood/ts41x-setup.c1
-rw-r--r--arch/arm/mach-ks8695/board-acs5k.c1
-rw-r--r--arch/arm/mach-ks8695/board-dsm320.c1
-rw-r--r--arch/arm/mach-ks8695/board-micrel.c1
-rw-r--r--arch/arm/mach-ks8695/generic.h1
-rw-r--r--arch/arm/mach-ks8695/include/mach/system.h21
-rw-r--r--arch/arm/mach-ks8695/time.c18
-rw-r--r--arch/arm/mach-lpc32xx/common.c20
-rw-r--r--arch/arm/mach-lpc32xx/common.h2
-rw-r--r--arch/arm/mach-lpc32xx/include/mach/system.h22
-rw-r--r--arch/arm/mach-lpc32xx/phy3250.c1
-rw-r--r--arch/arm/mach-mmp/aspenite.c2
-rw-r--r--arch/arm/mach-mmp/avengers_lite.c1
-rw-r--r--arch/arm/mach-mmp/brownstone.c1
-rw-r--r--arch/arm/mach-mmp/common.c5
-rw-r--r--arch/arm/mach-mmp/common.h1
-rw-r--r--arch/arm/mach-mmp/flint.c1
-rw-r--r--arch/arm/mach-mmp/gplugd.c1
-rw-r--r--arch/arm/mach-mmp/include/mach/pxa168.h1
-rw-r--r--arch/arm/mach-mmp/include/mach/system.h10
-rw-r--r--arch/arm/mach-mmp/jasper.c1
-rw-r--r--arch/arm/mach-mmp/pxa168.c5
-rw-r--r--arch/arm/mach-mmp/tavorevb.c1
-rw-r--r--arch/arm/mach-mmp/teton_bga.c1
-rw-r--r--arch/arm/mach-mmp/time.c16
-rw-r--r--arch/arm/mach-mmp/ttc_dkb.c1
-rw-r--r--arch/arm/mach-msm/Kconfig36
-rw-r--r--arch/arm/mach-msm/include/mach/debug-macro.S51
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap-7x00.h12
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap-7x30.h12
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap-8960.h5
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap-8x50.h12
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap-8x60.h5
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap.h12
-rw-r--r--arch/arm/mach-msm/include/mach/system.h8
-rw-r--r--arch/arm/mach-msm/include/mach/uncompress.h39
-rw-r--r--arch/arm/mach-msm/io.c15
-rw-r--r--arch/arm/mach-msm/platsmp.c2
-rw-r--r--arch/arm/mach-mv78xx0/buffalo-wxl-setup.c1
-rw-r--r--arch/arm/mach-mv78xx0/common.c16
-rw-r--r--arch/arm/mach-mv78xx0/common.h1
-rw-r--r--arch/arm/mach-mv78xx0/db78x00-bp-setup.c1
-rw-r--r--arch/arm/mach-mv78xx0/include/mach/system.h19
-rw-r--r--arch/arm/mach-mv78xx0/rd78x00-masa-setup.c1
-rw-r--r--arch/arm/mach-mx5/board-cpuimx51.c1
-rw-r--r--arch/arm/mach-mx5/board-cpuimx51sd.c1
-rw-r--r--arch/arm/mach-mx5/board-mx50_rdp.c1
-rw-r--r--arch/arm/mach-mx5/board-mx51_3ds.c1
-rw-r--r--arch/arm/mach-mx5/board-mx51_babbage.c1
-rw-r--r--arch/arm/mach-mx5/board-mx51_efikamx.c3
-rw-r--r--arch/arm/mach-mx5/board-mx51_efikasb.c1
-rw-r--r--arch/arm/mach-mx5/board-mx53_ard.c1
-rw-r--r--arch/arm/mach-mx5/board-mx53_evk.c1
-rw-r--r--arch/arm/mach-mx5/board-mx53_loco.c1
-rw-r--r--arch/arm/mach-mx5/board-mx53_smd.c1
-rw-r--r--arch/arm/mach-mx5/imx51-dt.c1
-rw-r--r--arch/arm/mach-mx5/imx53-dt.c1
-rw-r--r--arch/arm/mach-mxs/include/mach/common.h1
-rw-r--r--arch/arm/mach-mxs/include/mach/system.h2
-rw-r--r--arch/arm/mach-mxs/mach-m28evk.c1
-rw-r--r--arch/arm/mach-mxs/mach-mx23evk.c1
-rw-r--r--arch/arm/mach-mxs/mach-mx28evk.c1
-rw-r--r--arch/arm/mach-mxs/mach-stmp378x_devb.c1
-rw-r--r--arch/arm/mach-mxs/mach-tx28.c1
-rw-r--r--arch/arm/mach-mxs/system.c2
-rw-r--r--arch/arm/mach-netx/generic.c5
-rw-r--r--arch/arm/mach-netx/generic.h1
-rw-r--r--arch/arm/mach-netx/include/mach/system.h10
-rw-r--r--arch/arm/mach-netx/nxdb500.c1
-rw-r--r--arch/arm/mach-netx/nxdkn.c1
-rw-r--r--arch/arm/mach-netx/nxeb500hmi.c1
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c3
-rw-r--r--arch/arm/mach-nomadik/cpu-8815.c12
-rw-r--r--arch/arm/mach-nomadik/cpu-8815.h4
-rw-r--r--arch/arm/mach-nomadik/include/mach/setup.h3
-rw-r--r--arch/arm/mach-nomadik/include/mach/system.h13
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c1
-rw-r--r--arch/arm/mach-omap1/board-fsample.c1
-rw-r--r--arch/arm/mach-omap1/board-generic.c1
-rw-r--r--arch/arm/mach-omap1/board-h2.c1
-rw-r--r--arch/arm/mach-omap1/board-h3.c1
-rw-r--r--arch/arm/mach-omap1/board-htcherald.c1
-rw-r--r--arch/arm/mach-omap1/board-innovator.c1
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c1
-rw-r--r--arch/arm/mach-omap1/board-osk.c1
-rw-r--r--arch/arm/mach-omap1/board-palmte.c1
-rw-r--r--arch/arm/mach-omap1/board-palmtt.c1
-rw-r--r--arch/arm/mach-omap1/board-palmz71.c1
-rw-r--r--arch/arm/mach-omap1/board-perseus2.c1
-rw-r--r--arch/arm/mach-omap1/board-sx1.c1
-rw-r--r--arch/arm/mach-omap1/board-voiceblue.c6
-rw-r--r--arch/arm/mach-omap1/common.h1
-rw-r--r--arch/arm/mach-omap1/reset.c5
-rw-r--r--arch/arm/mach-omap1/time.c58
-rw-r--r--arch/arm/mach-omap2/Kconfig2
-rw-r--r--arch/arm/mach-omap2/board-2430sdp.c1
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c1
-rw-r--r--arch/arm/mach-omap2/board-3630sdp.c1
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c1
-rw-r--r--arch/arm/mach-omap2/board-am3517crane.c1
-rw-r--r--arch/arm/mach-omap2/board-am3517evm.c1
-rw-r--r--arch/arm/mach-omap2/board-apollon.c1
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c2
-rw-r--r--arch/arm/mach-omap2/board-cm-t3517.c1
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c1
-rw-r--r--arch/arm/mach-omap2/board-generic.c4
-rw-r--r--arch/arm/mach-omap2/board-h4.c1
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c2
-rw-r--r--arch/arm/mach-omap2/board-ldp.c1
-rw-r--r--arch/arm/mach-omap2/board-n8x0.c3
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c1
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c1
-rw-r--r--arch/arm/mach-omap2/board-omap3logic.c2
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c1
-rw-r--r--arch/arm/mach-omap2/board-omap3stalker.c1
-rw-r--r--arch/arm/mach-omap2/board-omap3touchbook.c1
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c1
-rw-r--r--arch/arm/mach-omap2/board-overo.c1
-rw-r--r--arch/arm/mach-omap2/board-rm680.c1
-rw-r--r--arch/arm/mach-omap2/board-rx51.c1
-rw-r--r--arch/arm/mach-omap2/board-ti8168evm.c2
-rw-r--r--arch/arm/mach-omap2/board-zoom.c2
-rw-r--r--arch/arm/mach-omap2/common.h1
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c4
-rw-r--r--arch/arm/mach-omap2/prcm.c5
-rw-r--r--arch/arm/mach-omap2/timer.c20
-rw-r--r--arch/arm/mach-orion5x/common.c12
-rw-r--r--arch/arm/mach-orion5x/common.h1
-rw-r--r--arch/arm/mach-orion5x/d2net-setup.c2
-rw-r--r--arch/arm/mach-orion5x/db88f5281-setup.c1
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c1
-rw-r--r--arch/arm/mach-orion5x/edmini_v2-setup.c1
-rw-r--r--arch/arm/mach-orion5x/include/mach/system.h14
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c2
-rw-r--r--arch/arm/mach-orion5x/ls-chl-setup.c3
-rw-r--r--arch/arm/mach-orion5x/ls_hgl-setup.c3
-rw-r--r--arch/arm/mach-orion5x/lsmini-setup.c3
-rw-r--r--arch/arm/mach-orion5x/mss2-setup.c3
-rw-r--r--arch/arm/mach-orion5x/mv2120-setup.c3
-rw-r--r--arch/arm/mach-orion5x/net2big-setup.c1
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c1
-rw-r--r--arch/arm/mach-orion5x/rd88f5181l-ge-setup.c1
-rw-r--r--arch/arm/mach-orion5x/rd88f5182-setup.c1
-rw-r--r--arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c1
-rw-r--r--arch/arm/mach-orion5x/terastation_pro2-setup.c1
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c3
-rw-r--r--arch/arm/mach-orion5x/ts409-setup.c1
-rw-r--r--arch/arm/mach-orion5x/ts78xx-setup.c1
-rw-r--r--arch/arm/mach-orion5x/wnr854t-setup.c1
-rw-r--r--arch/arm/mach-orion5x/wrt350n-v2-setup.c1
-rw-r--r--arch/arm/mach-picoxcell/Makefile1
-rw-r--r--arch/arm/mach-picoxcell/common.c15
-rw-r--r--arch/arm/mach-picoxcell/common.h1
-rw-r--r--arch/arm/mach-picoxcell/include/mach/irqs.h9
-rw-r--r--arch/arm/mach-picoxcell/include/mach/memory.h1
-rw-r--r--arch/arm/mach-picoxcell/include/mach/system.h5
-rw-r--r--arch/arm/mach-picoxcell/io.c32
-rw-r--r--arch/arm/mach-picoxcell/time.c17
-rw-r--r--arch/arm/mach-pnx4008/core.c6
-rw-r--r--arch/arm/mach-pnx4008/include/mach/system.h9
-rw-r--r--arch/arm/mach-prima2/common.h1
-rw-r--r--arch/arm/mach-prima2/include/mach/system.h12
-rw-r--r--arch/arm/mach-prima2/prima2.c1
-rw-r--r--arch/arm/mach-prima2/rstc.c7
-rw-r--r--arch/arm/mach-pxa/balloon3.c1
-rw-r--r--arch/arm/mach-pxa/capc7117.c3
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c1
-rw-r--r--arch/arm/mach-pxa/cm-x300.c1
-rw-r--r--arch/arm/mach-pxa/colibri-pxa270.c2
-rw-r--r--arch/arm/mach-pxa/colibri-pxa300.c1
-rw-r--r--arch/arm/mach-pxa/colibri-pxa320.c1
-rw-r--r--arch/arm/mach-pxa/corgi.c8
-rw-r--r--arch/arm/mach-pxa/csb726.c1
-rw-r--r--arch/arm/mach-pxa/em-x270.c2
-rw-r--r--arch/arm/mach-pxa/eseries.c6
-rw-r--r--arch/arm/mach-pxa/ezx.c6
-rw-r--r--arch/arm/mach-pxa/generic.h2
-rw-r--r--arch/arm/mach-pxa/gumstix.c1
-rw-r--r--arch/arm/mach-pxa/h5000.c1
-rw-r--r--arch/arm/mach-pxa/himalaya.c1
-rw-r--r--arch/arm/mach-pxa/hx4700.c1
-rw-r--r--arch/arm/mach-pxa/icontrol.c3
-rw-r--r--arch/arm/mach-pxa/idp.c1
-rw-r--r--arch/arm/mach-pxa/include/mach/system.h8
-rw-r--r--arch/arm/mach-pxa/littleton.c1
-rw-r--r--arch/arm/mach-pxa/lpd270.c1
-rw-r--r--arch/arm/mach-pxa/lubbock.c1
-rw-r--r--arch/arm/mach-pxa/magician.c1
-rw-r--r--arch/arm/mach-pxa/mainstone.c1
-rw-r--r--arch/arm/mach-pxa/mioa701.c6
-rw-r--r--arch/arm/mach-pxa/mp900.c1
-rw-r--r--arch/arm/mach-pxa/palmld.c3
-rw-r--r--arch/arm/mach-pxa/palmt5.c3
-rw-r--r--arch/arm/mach-pxa/palmtc.c3
-rw-r--r--arch/arm/mach-pxa/palmte2.c3
-rw-r--r--arch/arm/mach-pxa/palmtreo.c2
-rw-r--r--arch/arm/mach-pxa/palmtx.c3
-rw-r--r--arch/arm/mach-pxa/palmz72.c3
-rw-r--r--arch/arm/mach-pxa/pcm027.c1
-rw-r--r--arch/arm/mach-pxa/poodle.c3
-rw-r--r--arch/arm/mach-pxa/raumfeld.c3
-rw-r--r--arch/arm/mach-pxa/reset.c5
-rw-r--r--arch/arm/mach-pxa/saar.c1
-rw-r--r--arch/arm/mach-pxa/saarb.c1
-rw-r--r--arch/arm/mach-pxa/spitz.c6
-rw-r--r--arch/arm/mach-pxa/stargate2.c2
-rw-r--r--arch/arm/mach-pxa/tavorevb.c1
-rw-r--r--arch/arm/mach-pxa/tavorevb3.c1
-rw-r--r--arch/arm/mach-pxa/time.c15
-rw-r--r--arch/arm/mach-pxa/tosa.c4
-rw-r--r--arch/arm/mach-pxa/trizeps4.c2
-rw-r--r--arch/arm/mach-pxa/viper.c1
-rw-r--r--arch/arm/mach-pxa/vpac270.c3
-rw-r--r--arch/arm/mach-pxa/xcep.c1
-rw-r--r--arch/arm/mach-pxa/z2.c1
-rw-r--r--arch/arm/mach-pxa/zeus.c1
-rw-r--r--arch/arm/mach-pxa/zylonite.c1
-rw-r--r--arch/arm/mach-realview/Kconfig9
-rw-r--r--arch/arm/mach-realview/core.h1
-rw-r--r--arch/arm/mach-realview/include/mach/system.h17
-rw-r--r--arch/arm/mach-realview/realview_eb.c5
-rw-r--r--arch/arm/mach-realview/realview_pb1176.c5
-rw-r--r--arch/arm/mach-realview/realview_pb11mp.c5
-rw-r--r--arch/arm/mach-realview/realview_pba8.c5
-rw-r--r--arch/arm/mach-realview/realview_pbx.c5
-rw-r--r--arch/arm/mach-rpc/include/mach/system.h14
-rw-r--r--arch/arm/mach-rpc/riscpc.c12
-rw-r--r--arch/arm/mach-s3c2410/common.h17
-rw-r--r--arch/arm/mach-s3c2410/include/mach/reset.h22
-rw-r--r--arch/arm/mach-s3c2410/include/mach/system-reset.h32
-rw-r--r--arch/arm/mach-s3c2410/include/mach/system.h4
-rw-r--r--arch/arm/mach-s3c2410/mach-amlm5900.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c24
-rw-r--r--arch/arm/mach-s3c2410/mach-h1940.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-n30.c4
-rw-r--r--arch/arm/mach-s3c2410/mach-otom.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-qt2410.c5
-rw-r--r--arch/arm/mach-s3c2410/mach-smdk2410.c5
-rw-r--r--arch/arm/mach-s3c2410/mach-tct_hammer.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c26
-rw-r--r--arch/arm/mach-s3c2410/s3c2410.c19
-rw-r--r--arch/arm/mach-s3c2412/clock.c7
-rw-r--r--arch/arm/mach-s3c2412/mach-jive.c2
-rw-r--r--arch/arm/mach-s3c2412/mach-smdk2413.c3
-rw-r--r--arch/arm/mach-s3c2412/mach-vstms.c1
-rw-r--r--arch/arm/mach-s3c2412/s3c2412.c10
-rw-r--r--arch/arm/mach-s3c2416/Makefile1
-rw-r--r--arch/arm/mach-s3c2416/clock.c68
-rw-r--r--arch/arm/mach-s3c2416/mach-smdk2416.c1
-rw-r--r--arch/arm/mach-s3c2416/s3c2416.c7
-rw-r--r--arch/arm/mach-s3c2416/setup-sdhci.c24
-rw-r--r--arch/arm/mach-s3c2440/clock.c44
-rw-r--r--arch/arm/mach-s3c2440/common.h17
-rw-r--r--arch/arm/mach-s3c2440/mach-anubis.c25
-rw-r--r--arch/arm/mach-s3c2440/mach-at2440evb.c25
-rw-r--r--arch/arm/mach-s3c2440/mach-gta02.c2
-rw-r--r--arch/arm/mach-s3c2440/mach-mini2440.c3
-rw-r--r--arch/arm/mach-s3c2440/mach-nexcoder.c3
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c27
-rw-r--r--arch/arm/mach-s3c2440/mach-rx1950.c21
-rw-r--r--arch/arm/mach-s3c2440/mach-rx3715.c22
-rw-r--r--arch/arm/mach-s3c2440/mach-smdk2440.c3
-rw-r--r--arch/arm/mach-s3c2440/s3c2440.c13
-rw-r--r--arch/arm/mach-s3c2443/mach-smdk2443.c1
-rw-r--r--arch/arm/mach-s3c2443/s3c2443.c8
-rw-r--r--arch/arm/mach-s3c64xx/Kconfig8
-rw-r--r--arch/arm/mach-s3c64xx/Makefile65
-rw-r--r--arch/arm/mach-s3c64xx/clock.c247
-rw-r--r--arch/arm/mach-s3c64xx/common.c (renamed from arch/arm/mach-s3c64xx/irq-eint.c)192
-rw-r--r--arch/arm/mach-s3c64xx/common.h57
-rw-r--r--arch/arm/mach-s3c64xx/cpu.c161
-rw-r--r--arch/arm/mach-s3c64xx/dev-spi.c180
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/map.h2
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/system.h11
-rw-r--r--arch/arm/mach-s3c64xx/irq.c47
-rw-r--r--arch/arm/mach-s3c64xx/mach-anw6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-hmt.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-mini6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-ncp.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-real6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-smartq.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-smartq5.c3
-rw-r--r--arch/arm/mach-s3c64xx/mach-smartq7.c3
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6400.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/s3c6400.c5
-rw-r--r--arch/arm/mach-s3c64xx/s3c6410.c6
-rw-r--r--arch/arm/mach-s3c64xx/setup-sdhci.c24
-rw-r--r--arch/arm/mach-s3c64xx/setup-spi.c45
-rw-r--r--arch/arm/mach-s5p64x0/Kconfig7
-rw-r--r--arch/arm/mach-s5p64x0/Makefile11
-rw-r--r--arch/arm/mach-s5p64x0/clock-s5p6440.c96
-rw-r--r--arch/arm/mach-s5p64x0/clock-s5p6450.c84
-rw-r--r--arch/arm/mach-s5p64x0/clock.c4
-rw-r--r--arch/arm/mach-s5p64x0/common.c437
-rw-r--r--arch/arm/mach-s5p64x0/common.h57
-rw-r--r--arch/arm/mach-s5p64x0/cpu.c215
-rw-r--r--arch/arm/mach-s5p64x0/dev-spi.c224
-rw-r--r--arch/arm/mach-s5p64x0/dma.c227
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/map.h2
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/system.h2
-rw-r--r--arch/arm/mach-s5p64x0/init.c73
-rw-r--r--arch/arm/mach-s5p64x0/irq-eint.c155
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6440.c6
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6450.c6
-rw-r--r--arch/arm/mach-s5p64x0/setup-spi.c55
-rw-r--r--arch/arm/mach-s5pc100/Kconfig5
-rw-r--r--arch/arm/mach-s5pc100/Makefile28
-rw-r--r--arch/arm/mach-s5pc100/clock.c290
-rw-r--r--arch/arm/mach-s5pc100/common.c (renamed from arch/arm/mach-s5pc100/cpu.c)103
-rw-r--r--arch/arm/mach-s5pc100/common.h37
-rw-r--r--arch/arm/mach-s5pc100/dev-spi.c227
-rw-r--r--arch/arm/mach-s5pc100/dma.c247
-rw-r--r--arch/arm/mach-s5pc100/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-s5pc100/include/mach/map.h3
-rw-r--r--arch/arm/mach-s5pc100/include/mach/system.h2
-rw-r--r--arch/arm/mach-s5pc100/init.c24
-rw-r--r--arch/arm/mach-s5pc100/mach-smdkc100.c6
-rw-r--r--arch/arm/mach-s5pc100/setup-sdhci.c23
-rw-r--r--arch/arm/mach-s5pc100/setup-spi.c65
-rw-r--r--arch/arm/mach-s5pv210/Kconfig5
-rw-r--r--arch/arm/mach-s5pv210/Makefile20
-rw-r--r--arch/arm/mach-s5pv210/clock.c327
-rw-r--r--arch/arm/mach-s5pv210/common.c (renamed from arch/arm/mach-s5pv210/cpu.c)94
-rw-r--r--arch/arm/mach-s5pv210/common.h37
-rw-r--r--arch/arm/mach-s5pv210/dev-spi.c175
-rw-r--r--arch/arm/mach-s5pv210/dma.c241
-rw-r--r--arch/arm/mach-s5pv210/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-s5pv210/include/mach/map.h2
-rw-r--r--arch/arm/mach-s5pv210/include/mach/system.h2
-rw-r--r--arch/arm/mach-s5pv210/init.c44
-rw-r--r--arch/arm/mach-s5pv210/mach-aquila.c9
-rw-r--r--arch/arm/mach-s5pv210/mach-goni.c12
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkc110.c6
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkv210.c16
-rw-r--r--arch/arm/mach-s5pv210/mach-torbreck.c6
-rw-r--r--arch/arm/mach-s5pv210/setup-sdhci.c22
-rw-r--r--arch/arm/mach-s5pv210/setup-spi.c51
-rw-r--r--arch/arm/mach-sa1100/assabet.c1
-rw-r--r--arch/arm/mach-sa1100/badge4.c1
-rw-r--r--arch/arm/mach-sa1100/cerf.c1
-rw-r--r--arch/arm/mach-sa1100/collie.c1
-rw-r--r--arch/arm/mach-sa1100/generic.c11
-rw-r--r--arch/arm/mach-sa1100/generic.h1
-rw-r--r--arch/arm/mach-sa1100/h3100.c1
-rw-r--r--arch/arm/mach-sa1100/h3600.c1
-rw-r--r--arch/arm/mach-sa1100/hackkit.c1
-rw-r--r--arch/arm/mach-sa1100/include/mach/system.h13
-rw-r--r--arch/arm/mach-sa1100/jornada720.c1
-rw-r--r--arch/arm/mach-sa1100/lart.c1
-rw-r--r--arch/arm/mach-sa1100/nanoengine.c2
-rw-r--r--arch/arm/mach-sa1100/pleb.c1
-rw-r--r--arch/arm/mach-sa1100/shannon.c1
-rw-r--r--arch/arm/mach-sa1100/simpad.c1
-rw-r--r--arch/arm/mach-sa1100/time.c28
-rw-r--r--arch/arm/mach-shark/core.c3
-rw-r--r--arch/arm/mach-shark/include/mach/system.h3
-rw-r--r--arch/arm/mach-shmobile/board-ag5evm.c3
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c2
-rw-r--r--arch/arm/mach-shmobile/board-g3evm.c2
-rw-r--r--arch/arm/mach-shmobile/board-g4evm.c2
-rw-r--r--arch/arm/mach-shmobile/board-kota2.c139
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c2
-rw-r--r--arch/arm/mach-shmobile/clock-sh73a0.c18
-rw-r--r--arch/arm/mach-shmobile/include/mach/gpio.h2
-rw-r--r--arch/arm/mach-spear3xx/include/mach/generic.h2
-rw-r--r--arch/arm/mach-spear3xx/spear300_evb.c1
-rw-r--r--arch/arm/mach-spear3xx/spear310_evb.c1
-rw-r--r--arch/arm/mach-spear3xx/spear320_evb.c1
-rw-r--r--arch/arm/mach-spear6xx/include/mach/generic.h2
-rw-r--r--arch/arm/mach-spear6xx/spear600_evb.c1
-rw-r--r--arch/arm/mach-tcc8k/Kconfig11
-rw-r--r--arch/arm/mach-tcc8k/Makefile9
-rw-r--r--arch/arm/mach-tcc8k/Makefile.boot3
-rw-r--r--arch/arm/mach-tcc8k/board-tcc8000-sdk.c81
-rw-r--r--arch/arm/mach-tcc8k/clock.c580
-rw-r--r--arch/arm/mach-tcc8k/common.h15
-rw-r--r--arch/arm/mach-tcc8k/devices.c239
-rw-r--r--arch/arm/mach-tcc8k/io.c62
-rw-r--r--arch/arm/mach-tcc8k/irq.c111
-rw-r--r--arch/arm/mach-tcc8k/time.c134
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra20.c1
-rw-r--r--arch/arm/mach-tegra/board-harmony.c1
-rw-r--r--arch/arm/mach-tegra/board-paz00.c1
-rw-r--r--arch/arm/mach-tegra/board-seaboard.c3
-rw-r--r--arch/arm/mach-tegra/board-trimslice.c1
-rw-r--r--arch/arm/mach-tegra/common.c2
-rw-r--r--arch/arm/mach-tegra/include/mach/entry-macro.S18
-rw-r--r--arch/arm/mach-tegra/include/mach/system.h4
-rw-r--r--arch/arm/mach-tegra/irq.c4
-rw-r--r--arch/arm/mach-tegra/timer.c24
-rw-r--r--arch/arm/mach-u300/core.c20
-rw-r--r--arch/arm/mach-u300/include/mach/memory.h19
-rw-r--r--arch/arm/mach-u300/include/mach/platform.h1
-rw-r--r--arch/arm/mach-u300/include/mach/system.h26
-rw-r--r--arch/arm/mach-u300/timer.c15
-rw-r--r--arch/arm/mach-u300/u300.c3
-rw-r--r--arch/arm/mach-ux500/cpu-db5500.c5
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c5
-rw-r--r--arch/arm/mach-ux500/include/mach/gpio.h5
-rw-r--r--arch/arm/mach-ux500/include/mach/system.h5
-rw-r--r--arch/arm/mach-versatile/core.c13
-rw-r--r--arch/arm/mach-versatile/core.h1
-rw-r--r--arch/arm/mach-versatile/include/mach/system.h16
-rw-r--r--arch/arm/mach-versatile/versatile_ab.c1
-rw-r--r--arch/arm/mach-versatile/versatile_dt.c1
-rw-r--r--arch/arm/mach-versatile/versatile_pb.c1
-rw-r--r--arch/arm/mach-vexpress/Kconfig2
-rw-r--r--arch/arm/mach-vexpress/include/mach/system.h4
-rw-r--r--arch/arm/mach-vexpress/v2m.c2
-rw-r--r--arch/arm/mach-w90x900/cpu.c16
-rw-r--r--arch/arm/mach-w90x900/include/mach/system.h22
-rw-r--r--arch/arm/mach-w90x900/mach-nuc910evb.c1
-rw-r--r--arch/arm/mach-w90x900/mach-nuc950evb.c1
-rw-r--r--arch/arm/mach-w90x900/mach-nuc960evb.c1
-rw-r--r--arch/arm/mach-w90x900/nuc9xx.h1
-rw-r--r--arch/arm/mach-zynq/include/mach/system.h5
-rw-r--r--arch/arm/mm/Kconfig23
-rw-r--r--arch/arm/mm/fault.c58
-rw-r--r--arch/arm/mm/mmap.c173
-rw-r--r--arch/arm/mm/proc-v7.S17
-rw-r--r--arch/arm/nwfpe/entry.S8
-rw-r--r--arch/arm/nwfpe/fpopcode.c26
-rw-r--r--arch/arm/nwfpe/fpopcode.h3
-rw-r--r--arch/arm/oprofile/common.c2
-rw-r--r--arch/arm/plat-iop/Makefile2
-rw-r--r--arch/arm/plat-iop/restart.c19
-rw-r--r--arch/arm/plat-iop/time.c16
-rw-r--r--arch/arm/plat-mxc/Kconfig1
-rw-r--r--arch/arm/plat-mxc/cpufreq.c2
-rw-r--r--arch/arm/plat-mxc/include/mach/common.h3
-rw-r--r--arch/arm/plat-mxc/include/mach/system.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/uncompress.h1
-rw-r--r--arch/arm/plat-mxc/pwm.c9
-rw-r--r--arch/arm/plat-mxc/system.c9
-rw-r--r--arch/arm/plat-mxc/time.c15
-rw-r--r--arch/arm/plat-nomadik/timer.c20
-rw-r--r--arch/arm/plat-omap/counter_32k.c40
-rw-r--r--arch/arm/plat-omap/include/plat/common.h1
-rw-r--r--arch/arm/plat-omap/include/plat/system.h2
-rw-r--r--arch/arm/plat-orion/gpio.c6
-rw-r--r--arch/arm/plat-orion/time.c21
-rw-r--r--arch/arm/plat-s3c24xx/cpu.c23
-rw-r--r--arch/arm/plat-s3c24xx/dma.c3
-rw-r--r--arch/arm/plat-s3c24xx/s3c2443-clock.c39
-rw-r--r--arch/arm/plat-s5p/Makefile1
-rw-r--r--arch/arm/plat-s5p/cpu.c144
-rw-r--r--arch/arm/plat-s5p/s5p-time.c19
-rw-r--r--arch/arm/plat-samsung/Kconfig16
-rw-r--r--arch/arm/plat-samsung/devs.c127
-rw-r--r--arch/arm/plat-samsung/dma-ops.c15
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu-freq-core.h25
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu.h6
-rw-r--r--arch/arm/plat-samsung/include/plat/devs.h8
-rw-r--r--arch/arm/plat-samsung/include/plat/dma-ops.h1
-rw-r--r--arch/arm/plat-samsung/include/plat/dma-pl330.h3
-rw-r--r--arch/arm/plat-samsung/include/plat/exynos4.h35
-rw-r--r--arch/arm/plat-samsung/include/plat/irqs.h3
-rw-r--r--arch/arm/plat-samsung/include/plat/regs-serial.h45
-rw-r--r--arch/arm/plat-samsung/include/plat/reset.h16
-rw-r--r--arch/arm/plat-samsung/include/plat/s3c2412.h3
-rw-r--r--arch/arm/plat-samsung/include/plat/s3c2416.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/s3c2443.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/s3c6400.h36
-rw-r--r--arch/arm/plat-samsung/include/plat/s3c6410.h29
-rw-r--r--arch/arm/plat-samsung/include/plat/s3c64xx-spi.h24
-rw-r--r--arch/arm/plat-samsung/include/plat/s5p6440.h36
-rw-r--r--arch/arm/plat-samsung/include/plat/s5p6450.h36
-rw-r--r--arch/arm/plat-samsung/include/plat/s5pc100.h33
-rw-r--r--arch/arm/plat-samsung/include/plat/s5pv210.h33
-rw-r--r--arch/arm/plat-samsung/include/plat/sdhci.h31
-rw-r--r--arch/arm/plat-samsung/include/plat/system-reset.h31
-rw-r--r--arch/arm/plat-samsung/include/plat/watchdog-reset.h1
-rw-r--r--arch/arm/plat-spear/Makefile2
-rw-r--r--arch/arm/plat-spear/include/plat/system.h15
-rw-r--r--arch/arm/plat-spear/restart.c27
-rw-r--r--arch/arm/plat-tcc/Kconfig20
-rw-r--r--arch/arm/plat-tcc/Makefile3
-rw-r--r--arch/arm/plat-tcc/clock.c179
-rw-r--r--arch/arm/plat-tcc/include/mach/clock.h48
-rw-r--r--arch/arm/plat-tcc/include/mach/debug-macro.S32
-rw-r--r--arch/arm/plat-tcc/include/mach/entry-macro.S68
-rw-r--r--arch/arm/plat-tcc/include/mach/hardware.h43
-rw-r--r--arch/arm/plat-tcc/include/mach/io.h23
-rw-r--r--arch/arm/plat-tcc/include/mach/irqs.h83
-rw-r--r--arch/arm/plat-tcc/include/mach/system.h31
-rw-r--r--arch/arm/plat-tcc/include/mach/tcc8k-regs.h807
-rw-r--r--arch/arm/plat-tcc/include/mach/timex.h5
-rw-r--r--arch/arm/plat-tcc/include/mach/uncompress.h34
-rw-r--r--arch/arm/plat-tcc/system.c25
-rw-r--r--arch/arm/plat-versatile/sched-clock.c29
-rw-r--r--arch/arm/tools/mach-types713
-rw-r--r--arch/avr32/boards/atngw100/setup.c2
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c2
-rw-r--r--arch/avr32/boards/favr-32/setup.c2
-rw-r--r--arch/avr32/boards/hammerhead/setup.c2
-rw-r--r--arch/avr32/boards/merisc/setup.c2
-rw-r--r--arch/avr32/boards/mimc200/setup.c2
-rw-r--r--arch/avr32/mach-at32ap/at32ap700x.c8
-rw-r--r--arch/avr32/mach-at32ap/include/mach/board.h7
-rw-r--r--arch/ia64/include/asm/cputime.h1
-rw-r--r--arch/powerpc/include/asm/cputime.h2
-rw-r--r--arch/powerpc/include/asm/kvm_book3s.h33
-rw-r--r--arch/powerpc/include/asm/kvm_book3s_64.h33
-rw-r--r--arch/powerpc/kvm/book3s_hv.c2
-rw-r--r--arch/powerpc/kvm/book3s_pr.c2
-rw-r--r--arch/powerpc/kvm/e500.c1
-rw-r--r--arch/s390/include/asm/cputime.h2
-rw-r--r--arch/s390/oprofile/init.c2
-rw-r--r--arch/sh/boards/board-sh7757lcr.c16
-rw-r--r--arch/sh/oprofile/common.c4
-rw-r--r--arch/sparc/kernel/pci_sun4v.c4
-rw-r--r--arch/x86/kernel/cpu/perf_event_intel.c2
-rw-r--r--arch/x86/kernel/dumpstack_32.c8
-rw-r--r--arch/x86/kernel/dumpstack_64.c8
-rw-r--r--arch/x86/kvm/i8254.c10
-rw-r--r--arch/x86/kvm/x86.c19
-rw-r--r--arch/x86/net/bpf_jit_comp.c4
-rw-r--r--block/blk-map.c2
-rw-r--r--block/blk-tag.c13
-rw-r--r--block/cfq-iosched.c12
-rw-r--r--drivers/ata/Kconfig2
-rw-r--r--drivers/ata/pata_at91.c6
-rw-r--r--drivers/char/ipmi/ipmi_watchdog.c41
-rw-r--r--drivers/clocksource/clksrc-dbx500-prcmu.c16
-rw-r--r--drivers/dma/Kconfig4
-rw-r--r--drivers/dma/pl330.c99
-rw-r--r--drivers/gpio/gpio-samsung.c72
-rw-r--r--drivers/gpu/drm/i915/i915_gem_execbuffer.c4
-rw-r--r--drivers/gpu/drm/i915/intel_display.c8
-rw-r--r--drivers/gpu/drm/radeon/evergreen.c12
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_drv.h5
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c8
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c16
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_kms.c400
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_kms.h5
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c22
-rw-r--r--drivers/gpu/drm/vmwgfx/vmwgfx_resource.c23
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c22
-rw-r--r--drivers/i2c/busses/i2c-omap.c11
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c3
-rw-r--r--drivers/ide/at91_ide.c2
-rw-r--r--drivers/infiniband/core/cma.c6
-rw-r--r--drivers/infiniband/hw/mlx4/main.c6
-rw-r--r--drivers/infiniband/hw/qib/qib_file_ops.c4
-rw-r--r--drivers/input/keyboard/samsung-keypad.c174
-rw-r--r--drivers/input/misc/cma3000_d0x.c4
-rw-r--r--drivers/input/mouse/sentelic.c8
-rw-r--r--drivers/input/mouse/sentelic.h3
-rw-r--r--drivers/input/mouse/synaptics.c11
-rw-r--r--drivers/input/tablet/wacom_wac.c4
-rw-r--r--drivers/iommu/iommu.c2
-rw-r--r--drivers/md/bitmap.c5
-rw-r--r--drivers/md/linear.c1
-rw-r--r--drivers/md/md.c3
-rw-r--r--drivers/md/raid5.c14
-rw-r--r--drivers/media/common/tuners/mxl5007t.c3
-rw-r--r--drivers/media/common/tuners/tda18218.c2
-rw-r--r--drivers/media/rc/ati_remote.c111
-rw-r--r--drivers/media/rc/keymaps/rc-ati-x10.c96
-rw-r--r--drivers/media/rc/keymaps/rc-medion-x10.c128
-rw-r--r--drivers/media/rc/keymaps/rc-snapstream-firefly.c114
-rw-r--r--drivers/media/video/au0828/au0828-cards.c7
-rw-r--r--drivers/media/video/davinci/vpif.h1
-rw-r--r--drivers/media/video/davinci/vpif_capture.h2
-rw-r--r--drivers/media/video/davinci/vpif_display.h1
-rw-r--r--drivers/media/video/gspca/gspca.c6
-rw-r--r--drivers/media/video/m5mols/m5mols.h2
-rw-r--r--drivers/media/video/m5mols/m5mols_core.c22
-rw-r--r--drivers/media/video/mt9m111.c1
-rw-r--r--drivers/media/video/mt9t112.c4
-rw-r--r--drivers/media/video/omap/omap_vout.c9
-rw-r--r--drivers/media/video/omap1_camera.c1
-rw-r--r--drivers/media/video/omap24xxcam-dma.c2
-rw-r--r--drivers/media/video/omap3isp/ispccdc.c2
-rw-r--r--drivers/media/video/omap3isp/ispstat.c2
-rw-r--r--drivers/media/video/omap3isp/ispvideo.c1
-rw-r--r--drivers/media/video/ov6650.c2
-rw-r--r--drivers/media/video/s5p-fimc/fimc-capture.c14
-rw-r--r--drivers/media/video/s5p-fimc/fimc-core.c24
-rw-r--r--drivers/media/video/s5p-fimc/fimc-core.h2
-rw-r--r--drivers/media/video/s5p-fimc/fimc-mdevice.c43
-rw-r--r--drivers/media/video/s5p-fimc/fimc-reg.c15
-rw-r--r--drivers/media/video/s5p-mfc/s5p_mfc_enc.c2
-rw-r--r--drivers/media/video/s5p-tv/mixer_video.c1
-rw-r--r--drivers/media/video/sh_mobile_ceu_camera.c34
-rw-r--r--drivers/media/video/sh_mobile_csi2.c4
-rw-r--r--drivers/media/video/soc_camera.c3
-rw-r--r--drivers/mfd/ab5500-debugfs.c2
-rw-r--r--drivers/mfd/ab8500-core.c2
-rw-r--r--drivers/mfd/adp5520.c2
-rw-r--r--drivers/mfd/da903x.c3
-rw-r--r--drivers/mfd/jz4740-adc.c1
-rw-r--r--drivers/mfd/tps6586x.c2
-rw-r--r--drivers/mfd/tps65910.c2
-rw-r--r--drivers/mfd/twl-core.c16
-rw-r--r--drivers/mfd/twl4030-irq.c18
-rw-r--r--drivers/mfd/wm8994-core.c1
-rw-r--r--drivers/mmc/core/host.c11
-rw-r--r--drivers/mmc/host/at91_mci.c30
-rw-r--r--drivers/mmc/host/mmci.c14
-rw-r--r--drivers/mmc/host/sdhci-cns3xxx.c5
-rw-r--r--drivers/mmc/host/sdhci-dove.c5
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c5
-rw-r--r--drivers/mmc/host/sdhci-of-esdhc.c5
-rw-r--r--drivers/mmc/host/sdhci-of-hlwd.c5
-rw-r--r--drivers/mmc/host/sdhci-pci.c26
-rw-r--r--drivers/mmc/host/sdhci-pltfm.c18
-rw-r--r--drivers/mmc/host/sdhci-pltfm.h6
-rw-r--r--drivers/mmc/host/sdhci-pxav2.c5
-rw-r--r--drivers/mmc/host/sdhci-pxav3.c5
-rw-r--r--drivers/mmc/host/sdhci-s3c.c28
-rw-r--r--drivers/mmc/host/sdhci-tegra.c5
-rw-r--r--drivers/mmc/host/sdhci.c2
-rw-r--r--drivers/mmc/host/sdhci.h2
-rw-r--r--drivers/mmc/host/vub300.c2
-rw-r--r--drivers/mtd/maps/plat-ram.c12
-rw-r--r--drivers/mtd/maps/pxa2xx-flash.c2
-rw-r--r--drivers/mtd/nand/atmel_nand.c8
-rw-r--r--drivers/mtd/nand/gpmi-nand/gpmi-nand.c2
-rw-r--r--drivers/mtd/nand/ndfc.c2
-rw-r--r--drivers/net/ethernet/cadence/at91_ether.c3
-rw-r--r--drivers/net/ethernet/cadence/at91_ether.h4
-rw-r--r--drivers/net/ethernet/cadence/macb.c153
-rw-r--r--drivers/net/ethernet/marvell/skge.c3
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_cq.c1
-rw-r--r--drivers/net/ethernet/realtek/r8169.c14
-rw-r--r--drivers/net/ethernet/ti/davinci_cpdma.c2
-rw-r--r--drivers/net/usb/asix.c4
-rw-r--r--drivers/net/wireless/ath/ath9k/rc.c4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-rxon.c4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-tx.c5
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c6
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-trans-pcie.c4
-rw-r--r--drivers/net/wireless/mwifiex/cmdevt.c9
-rw-r--r--drivers/of/platform.c2
-rw-r--r--drivers/oprofile/oprofile_files.c7
-rw-r--r--drivers/oprofile/oprofilefs.c11
-rw-r--r--drivers/pci/ats.c1
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c30
-rw-r--r--drivers/pci/iov.c7
-rw-r--r--drivers/pci/pci.c9
-rw-r--r--drivers/rtc/interface.c6
-rw-r--r--drivers/rtc/rtc-at91rm9200.c101
-rw-r--r--drivers/rtc/rtc-m41t80.c9
-rw-r--r--drivers/rtc/rtc-s3c.c21
-rw-r--r--drivers/s390/scsi/zfcp_scsi.c4
-rw-r--r--drivers/scsi/bnx2i/bnx2i_hwi.c5
-rw-r--r--drivers/scsi/fcoe/fcoe.c116
-rw-r--r--drivers/scsi/fcoe/fcoe_ctlr.c4
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_scsih.c2
-rw-r--r--drivers/scsi/qla2xxx/qla_attr.c27
-rw-r--r--drivers/scsi/qla2xxx/qla_dbg.c8
-rw-r--r--drivers/scsi/qla2xxx/qla_gbl.h1
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c3
-rw-r--r--drivers/scsi/qla2xxx/qla_iocb.c14
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c2
-rw-r--r--drivers/scsi/qla2xxx/qla_mbx.c25
-rw-r--r--drivers/scsi/qla2xxx/qla_nx.c42
-rw-r--r--drivers/scsi/qla2xxx/qla_nx.h4
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c86
-rw-r--r--drivers/scsi/qla2xxx/qla_version.h2
-rw-r--r--drivers/scsi/qla4xxx/ql4_def.h55
-rw-r--r--drivers/scsi/qla4xxx/ql4_fw.h8
-rw-r--r--drivers/scsi/qla4xxx/ql4_glbl.h16
-rw-r--r--drivers/scsi/qla4xxx/ql4_init.c243
-rw-r--r--drivers/scsi/qla4xxx/ql4_mbx.c11
-rw-r--r--drivers/scsi/qla4xxx/ql4_os.c1084
-rw-r--r--drivers/scsi/qla4xxx/ql4_version.h2
-rw-r--r--drivers/spi/spi-s3c64xx.c14
-rw-r--r--drivers/tty/serial/Kconfig45
-rw-r--r--drivers/tty/serial/Makefile5
-rw-r--r--drivers/tty/serial/s3c2410.c115
-rw-r--r--drivers/tty/serial/s3c2412.c149
-rw-r--r--drivers/tty/serial/s3c2440.c178
-rw-r--r--drivers/tty/serial/s3c6400.c149
-rw-r--r--drivers/tty/serial/s5pv210.c158
-rw-r--r--drivers/tty/serial/samsung.c639
-rw-r--r--drivers/tty/serial/samsung.h32
-rw-r--r--drivers/usb/dwc3/core.c2
-rw-r--r--drivers/usb/gadget/at91_udc.c14
-rw-r--r--drivers/usb/gadget/epautoconf.c3
-rw-r--r--drivers/usb/host/isp1760-if.c8
-rw-r--r--drivers/usb/host/ohci-at91.c12
-rw-r--r--drivers/usb/musb/musb_host.c4
-rw-r--r--drivers/watchdog/at91sam9_wdt.c22
-rw-r--r--drivers/watchdog/at91sam9_wdt.h6
-rw-r--r--drivers/watchdog/coh901327_wdt.c6
-rw-r--r--drivers/watchdog/hpwdt.c5
-rw-r--r--drivers/watchdog/iTCO_wdt.c6
-rw-r--r--drivers/watchdog/sp805_wdt.c2
-rw-r--r--drivers/xen/xenbus/xenbus_xs.c13
-rw-r--r--firmware/README.AddingFirmware3
-rw-r--r--fs/btrfs/async-thread.c3
-rw-r--r--fs/btrfs/inode.c9
-rw-r--r--fs/ceph/dir.c29
-rw-r--r--fs/fs-writeback.c11
-rw-r--r--fs/locks.c11
-rw-r--r--fs/nfs/file.c2
-rw-r--r--fs/nfs/nfs4proc.c24
-rw-r--r--fs/nfs/nfs4state.c33
-rw-r--r--fs/nilfs2/ioctl.c16
-rw-r--r--fs/proc/stat.c4
-rw-r--r--fs/xfs/xfs_super.c30
-rw-r--r--fs/xfs/xfs_sync.c36
-rw-r--r--fs/xfs/xfs_sync.h2
-rw-r--r--include/asm-generic/cputime.h1
-rw-r--r--include/linux/amba/pl330.h15
-rw-r--r--include/linux/clocksource.h11
-rw-r--r--include/linux/irqdomain.h3
-rw-r--r--include/linux/kvm.h1
-rw-r--r--include/linux/lglock.h36
-rw-r--r--include/linux/platform_data/macb.h17
-rw-r--r--include/media/davinci/vpif_types.h71
-rw-r--r--include/media/soc_camera.h7
-rw-r--r--include/net/dst.h1
-rw-r--r--include/net/flow.h1
-rw-r--r--include/net/ip_vs.h2
-rw-r--r--include/net/sctp/structs.h4
-rw-r--r--include/net/sock.h4
-rw-r--r--include/scsi/libfcoe.h3
-rw-r--r--include/trace/events/writeback.h15
-rw-r--r--include/xen/interface/io/xs_wire.h3
-rw-r--r--kernel/cgroup.c5
-rw-r--r--kernel/cpuset.c29
-rw-r--r--kernel/events/core.c8
-rw-r--r--kernel/futex.c28
-rw-r--r--kernel/irq/irqdomain.c12
-rw-r--r--kernel/sched_fair.c14
-rw-r--r--kernel/sysctl_binary.c2
-rw-r--r--kernel/time/clockevents.c1
-rw-r--r--kernel/time/clocksource.c12
-rw-r--r--mm/filemap.c7
-rw-r--r--mm/hugetlb.c2
-rw-r--r--mm/memcontrol.c3
-rw-r--r--mm/mempolicy.c11
-rw-r--r--mm/oom_kill.c2
-rw-r--r--mm/percpu.c6
-rw-r--r--mm/vmalloc.c2
-rw-r--r--net/bluetooth/hci_conn.c2
-rw-r--r--net/bluetooth/l2cap_core.c12
-rw-r--r--net/bluetooth/rfcomm/core.c1
-rw-r--r--net/bridge/br_netfilter.c8
-rw-r--r--net/core/flow.c12
-rw-r--r--net/core/net-sysfs.c7
-rw-r--r--net/core/sock.c6
-rw-r--r--net/ipv4/ipconfig.c4
-rw-r--r--net/ipv4/route.c112
-rw-r--r--net/ipv6/ip6_output.c2
-rw-r--r--net/llc/af_llc.c14
-rw-r--r--net/netfilter/ipvs/ip_vs_conn.c2
-rw-r--r--net/netfilter/ipvs/ip_vs_ctl.c10
-rw-r--r--net/netfilter/ipvs/ip_vs_sync.c2
-rw-r--r--net/netfilter/nf_conntrack_netlink.c22
-rw-r--r--net/netfilter/xt_connbytes.c6
-rw-r--r--net/nfc/nci/core.c2
-rw-r--r--net/packet/af_packet.c12
-rw-r--r--net/sched/sch_mqprio.c2
-rw-r--r--net/sched/sch_netem.c7
-rw-r--r--net/sctp/associola.c2
-rw-r--r--net/sctp/output.c8
-rw-r--r--net/sctp/outqueue.c6
-rw-r--r--net/sctp/protocol.c3
-rw-r--r--net/sctp/socket.c2
-rw-r--r--net/sctp/sysctl.c13
-rw-r--r--net/sunrpc/sched.c30
-rw-r--r--net/sunrpc/xprt.c10
-rw-r--r--net/xfrm/xfrm_policy.c18
-rw-r--r--scripts/kconfig/Makefile5
-rw-r--r--security/integrity/evm/evm_crypto.c19
-rw-r--r--security/selinux/netport.c4
-rw-r--r--sound/atmel/ac97c.c4
-rw-r--r--sound/soc/codecs/wm8776.c1
-rw-r--r--virt/kvm/assigned-dev.c93
1104 files changed, 12816 insertions, 12914 deletions
diff --git a/Documentation/devicetree/bindings/arm/insignal-boards.txt b/Documentation/devicetree/bindings/arm/insignal-boards.txt
new file mode 100644
index 00000000000..524c3dc5d80
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/insignal-boards.txt
@@ -0,0 +1,8 @@
+* Insignal's Exynos4210 based Origen evaluation board
+
+Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC.
+
+Required root node properties:
+ - compatible = should be one or more of the following.
+ (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
+ (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC.
diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt
new file mode 100644
index 00000000000..0bf68be56fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt
@@ -0,0 +1,8 @@
+* Samsung's Exynos4210 based SMDKV310 evaluation board
+
+SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC.
+
+Required root node properties:
+ - compatible = should be one or more of the following.
+ (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
+ (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC.
diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt
new file mode 100644
index 00000000000..a4cd273b2a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm-pl330.txt
@@ -0,0 +1,30 @@
+* ARM PrimeCell PL330 DMA Controller
+
+The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+between memory and peripherals or memory to memory.
+
+Required properties:
+ - compatible: should include both "arm,pl330" and "arm,primecell".
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+
+Example:
+
+ pdma0: pdma@12680000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12680000 0x1000>;
+ interrupts = <99>;
+ };
+
+Client drivers (device nodes requiring dma transfers from dev-to-mem or
+mem-to-dev) should specify the DMA channel numbers using a two-value pair
+as shown below.
+
+ [property name] = <[phandle of the dma controller] [dma request id]>;
+
+ where 'dma request id' is the dma request number which is connected
+ to the client controller. The 'property name' is recommended to be
+ of the form <name>-dma-channel.
+
+ Example: tx-dma-channel = <&pdma0 12>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
new file mode 100644
index 00000000000..8f50fe5e6c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
@@ -0,0 +1,40 @@
+Samsung Exynos4 GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "samsung,exynos4-gpio>".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
+ should be the following with values derived from the SoC user manual.
+ <[phandle of the gpio controller node]
+ [pin number within the gpio controller]
+ [mux function]
+ [pull up/down]
+ [drive strength]>
+
+ Values for gpio specifier:
+ - Pin number: is a value between 0 to 7.
+ - Pull Up/Down: 0 - Pull Up/Down Disabled.
+ 1 - Pull Down Enabled.
+ 3 - Pull Up Enabled.
+ - Drive Strength: 0 - 1x,
+ 1 - 3x,
+ 2 - 2x,
+ 3 - 4x
+
+- gpio-controller: Specifies that the node is a gpio controller.
+- #address-cells: should be 1.
+- #size-cells: should be 1.
+
+Example:
+
+ gpa0: gpio-controller@11400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400000 0x20>;
+ #gpio-cells = <4>;
+ gpio-controller;
+ };
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
new file mode 100644
index 00000000000..ce3e394c0e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -0,0 +1,88 @@
+* Samsung's Keypad Controller device tree bindings
+
+Samsung's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad
+ controller.
+ - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad
+ controller.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- interrupts: The interrupt number to the cpu.
+
+Required Board Specific Properties:
+- samsung,keypad-num-rows: Number of row lines connected to the keypad
+ controller.
+
+- samsung,keypad-num-columns: Number of column lines connected to the
+ keypad controller.
+
+- row-gpios: List of gpios used as row lines. The gpio specifier for
+ this property depends on the gpio controller to which these row lines
+ are connected.
+
+- col-gpios: List of gpios used as column lines. The gpio specifier for
+ this property depends on the gpio controller to which these column
+ lines are connected.
+
+- Keys represented as child nodes: Each key connected to the keypad
+ controller is represented as a child node to the keypad controller
+ device node and should include the following properties.
+ - keypad,row: the row number to which the key is connected.
+ - keypad,column: the column number to which the key is connected.
+ - linux,code: the key-code to be reported when the key is pressed
+ and released.
+
+Optional Properties specific to linux:
+- linux,keypad-no-autorepeat: do no enable autorepeat feature.
+- linux,keypad-wakeup: use any event on keypad as wakeup event.
+
+
+Example:
+ keypad@100A0000 {
+ compatible = "samsung,s5pv210-keypad";
+ reg = <0x100A0000 0x100>;
+ interrupts = <173>;
+ samsung,keypad-num-rows = <2>;
+ samsung,keypad-num-columns = <8>;
+ linux,input-no-autorepeat;
+ linux,input-wakeup;
+
+ row-gpios = <&gpx2 0 3 3 0
+ &gpx2 1 3 3 0>;
+
+ col-gpios = <&gpx1 0 3 0 0
+ &gpx1 1 3 0 0
+ &gpx1 2 3 0 0
+ &gpx1 3 3 0 0
+ &gpx1 4 3 0 0
+ &gpx1 5 3 0 0
+ &gpx1 6 3 0 0
+ &gpx1 7 3 0 0>;
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <3>;
+ linux,code = <2>;
+ };
+
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <4>;
+ linux,code = <3>;
+ };
+
+ key_3 {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <4>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
new file mode 100644
index 00000000000..90ec45fd33e
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
@@ -0,0 +1,20 @@
+* Samsung's S3C Real Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+ * "samsung,s3c2410-rtc" - for controllers compatible with s3c2410 rtc.
+ * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: Two interrupt numbers to the cpu should be specified. First
+ interrupt number is the rtc alarm interupt and second interrupt number
+ is the rtc tick interrupt. The number of cells representing a interrupt
+ depends on the parent interrupt controller.
+
+Example:
+
+ rtc@10070000 {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x10070000 0x100>;
+ interrupts = <44 0 45 0>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt
new file mode 100644
index 00000000000..2c8a17cf5cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.txt
@@ -0,0 +1,14 @@
+* Samsung's UART Controller
+
+The Samsung's UART controller is used for interfacing SoC with serial communicaion
+devices.
+
+Required properties:
+- compatible: should be
+ - "samsung,exynos4210-uart", for UART's compatible with Exynos4210 uart ports.
+
+- reg: base physical address of the controller and length of memory mapped
+ region.
+
+- interrupts: interrupt number to the cpu. The interrupt specifier format depends
+ on the interrupt controller parent.
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 7945b0bd35e..e2a4b528736 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1100,6 +1100,15 @@ emulate them efficiently. The fields in each entry are defined as follows:
eax, ebx, ecx, edx: the values returned by the cpuid instruction for
this function/index combination
+The TSC deadline timer feature (CPUID leaf 1, ecx[24]) is always returned
+as false, since the feature depends on KVM_CREATE_IRQCHIP for local APIC
+support. Instead it is reported via
+
+ ioctl(KVM_CHECK_EXTENSION, KVM_CAP_TSC_DEADLINE_TIMER)
+
+if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the
+feature in userspace, then you can enable the feature for KVM_SET_CPUID2.
+
4.47 KVM_PPC_GET_PVINFO
Capability: KVM_CAP_PPC_GET_PVINFO
@@ -1151,6 +1160,13 @@ following flags are specified:
/* Depends on KVM_CAP_IOMMU */
#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
+The KVM_DEV_ASSIGN_ENABLE_IOMMU flag is a mandatory option to ensure
+isolation of the device. Usages not specifying this flag are deprecated.
+
+Only PCI header type 0 devices with PCI BAR resources are supported by
+device assignment. The user requesting this ioctl must have read/write
+access to the PCI sysfs resource files associated with the device.
+
4.49 KVM_DEASSIGN_PCI_DEVICE
Capability: KVM_CAP_DEVICE_DEASSIGNMENT
diff --git a/MAINTAINERS b/MAINTAINERS
index b9db108f01c..b26219050ff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1124,13 +1124,6 @@ S: Supported
F: arch/arm/mach-shmobile/
F: drivers/sh/
-ARM/TELECHIPS ARM ARCHITECTURE
-M: "Hans J. Koch" <hjk@hansjkoch.de>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/plat-tcc/
-F: arch/arm/mach-tcc8k/
-
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2700,7 +2693,7 @@ FIREWIRE SUBSYSTEM
M: Stefan Richter <stefanr@s5r6.in-berlin.de>
L: linux1394-devel@lists.sourceforge.net
W: http://ieee1394.wiki.kernel.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394.git
S: Maintained
F: drivers/firewire/
F: include/linux/firewire*.h
@@ -3101,6 +3094,7 @@ F: include/linux/hid*
HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
M: Thomas Gleixner <tglx@linutronix.de>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Maintained
F: Documentation/timers/
F: kernel/hrtimer.c
@@ -3610,7 +3604,7 @@ F: net/irda/
IRQ SUBSYSTEM
M: Thomas Gleixner <tglx@linutronix.de>
S: Maintained
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
F: kernel/irq/
ISAPNP
@@ -4098,7 +4092,7 @@ F: drivers/hwmon/lm90.c
LOCKDEP AND LOCKSTAT
M: Peter Zijlstra <peterz@infradead.org>
M: Ingo Molnar <mingo@redhat.com>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/locking
S: Maintained
F: Documentation/lockdep*.txt
F: Documentation/lockstat.txt
@@ -4280,7 +4274,9 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
F: Documentation/dvb/
F: Documentation/video4linux/
+F: Documentation/DocBook/media/
F: drivers/media/
+F: drivers/staging/media/
F: include/media/
F: include/linux/dvb/
F: include/linux/videodev*.h
@@ -5086,6 +5082,7 @@ M: Peter Zijlstra <a.p.zijlstra@chello.nl>
M: Paul Mackerras <paulus@samba.org>
M: Ingo Molnar <mingo@elte.hu>
M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Supported
F: kernel/events/*
F: include/linux/perf_event.h
@@ -5117,6 +5114,15 @@ L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mtd/devices/phram.c
+PICOXCELL SUPPORT
+M: Jamie Iles <jamie@jamieiles.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T: git git://github.com/jamieiles/linux-2.6-ji.git
+S: Supported
+F: arch/arm/mach-picoxcell
+F: drivers/*/picoxcell*
+F: drivers/*/*/picoxcell*
+
PIN CONTROL SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
@@ -5165,6 +5171,7 @@ F: drivers/scsi/pm8001/
POSIX CLOCKS and TIMERS
M: Thomas Gleixner <tglx@linutronix.de>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Supported
F: fs/timerfd.c
F: include/linux/timer*
@@ -5680,6 +5687,7 @@ F: drivers/dma/dw_dmac.c
TIMEKEEPING, NTP
M: John Stultz <johnstul@us.ibm.com>
M: Thomas Gleixner <tglx@linutronix.de>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Supported
F: include/linux/clocksource.h
F: include/linux/time.h
@@ -5704,6 +5712,7 @@ F: drivers/watchdog/sc1200wdt.c
SCHEDULER
M: Ingo Molnar <mingo@elte.hu>
M: Peter Zijlstra <peterz@infradead.org>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
S: Maintained
F: kernel/sched*
F: include/linux/sched.h
@@ -6631,7 +6640,7 @@ TRACING
M: Steven Rostedt <rostedt@goodmis.org>
M: Frederic Weisbecker <fweisbec@gmail.com>
M: Ingo Molnar <mingo@redhat.com>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git perf/core
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Maintained
F: Documentation/trace/ftrace.txt
F: arch/*/*/*/ftrace.h
@@ -7381,7 +7390,7 @@ M: Thomas Gleixner <tglx@linutronix.de>
M: Ingo Molnar <mingo@redhat.com>
M: "H. Peter Anvin" <hpa@zytor.com>
M: x86@kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
S: Maintained
F: Documentation/x86/
F: arch/x86/
diff --git a/Makefile b/Makefile
index a43733df397..ea51081812f 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 2
SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a02385b2444..ff7416f8eb8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -258,6 +258,7 @@ config ARCH_INTEGRATOR
select ARCH_HAS_CPUFREQ
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
+ select HAVE_TCM
select ICST
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
@@ -341,10 +342,12 @@ config ARCH_HIGHBANK
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
+ select CACHE_L2X0
select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
+ select HAVE_SMP
select USE_OF
help
Support for the Calxeda Highbank SoC based boards.
@@ -362,6 +365,7 @@ config ARCH_CNS3XXX
select CPU_V6K
select GENERIC_CLOCKEVENTS
select ARM_GIC
+ select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
help
@@ -382,6 +386,7 @@ config ARCH_PRIMA2
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
+ select MIGHT_HAVE_CACHE_L2X0
select USE_OF
select ZONE_DMA
help
@@ -634,6 +639,8 @@ config ARCH_TEGRA
select GENERIC_GPIO
select HAVE_CLK
select HAVE_SCHED_CLOCK
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_HAS_CPUFREQ
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
@@ -651,6 +658,7 @@ config ARCH_PICOXCELL
select HAVE_SCHED_CLOCK
select HAVE_TCM
select NO_IOPORT
+ select SPARSE_IRQ
select USE_OF
help
This enables support for systems based on the Picochip picoXcell
@@ -703,7 +711,9 @@ config ARCH_SHMOBILE
select HAVE_CLK
select CLKDEV_LOOKUP
select HAVE_MACH_CLKDEV
+ select HAVE_SMP
select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
@@ -868,16 +878,6 @@ config ARCH_SHARK
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
-config ARCH_TCC_926
- bool "Telechips TCC ARM926-based systems"
- select CLKSRC_MMIO
- select CPU_ARM926T
- select HAVE_CLK
- select CLKDEV_LOOKUP
- select GENERIC_CLOCKEVENTS
- help
- Support for Telechips TCC ARM926-based systems.
-
config ARCH_U300
bool "ST-Ericsson U300 Series"
depends on MMU
@@ -893,7 +893,6 @@ config ARCH_U300
select HAVE_MACH_CLKDEV
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select NEED_MACH_MEMORY_H
help
Support for ST-Ericsson U300 series mobile platforms.
@@ -905,6 +904,8 @@ config ARCH_U8500
select CLKDEV_LOOKUP
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
help
Support for ST-Ericsson's Ux500 architecture
@@ -915,6 +916,7 @@ config ARCH_NOMADIK
select CPU_ARM926T
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_REQUIRE_GPIOLIB
help
Support for the Nomadik platform by ST-Ericsson
@@ -974,6 +976,7 @@ config ARCH_ZYNQ
select ARM_GIC
select ARM_AMBA
select ICST
+ select MIGHT_HAVE_CACHE_L2X0
select USE_OF
help
Support for Xilinx Zynq ARM Cortex A9 Platform
@@ -1060,8 +1063,6 @@ source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-spear/Kconfig"
-source "arch/arm/plat-tcc/Kconfig"
-
if ARCH_S3C2410
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
@@ -1126,6 +1127,11 @@ config ARM_TIMER_SP804
source arch/arm/mm/Kconfig
+config ARM_NR_BANKS
+ int
+ default 16 if ARCH_EP93XX
+ default 8
+
config IWMMXT
bool "Enable iWMMXt support"
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
@@ -1246,7 +1252,7 @@ config PL310_ERRATA_588369
config ARM_ERRATA_720789
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
- depends on CPU_V7 && SMP
+ depends on CPU_V7
help
This option enables the workaround for the 720789 Cortex-A9 (prior to
r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
@@ -1282,7 +1288,7 @@ config ARM_ERRATA_743622
config ARM_ERRATA_751472
bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
- depends on CPU_V7 && SMP
+ depends on CPU_V7
help
This option enables the workaround for the 751472 Cortex-A9 (prior
to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
@@ -1435,14 +1441,20 @@ menu "Kernel Features"
source "kernel/time/Kconfig"
+config HAVE_SMP
+ bool
+ help
+ This option should be selected by machines which have an SMP-
+ capable CPU.
+
+ The only effect of this option is to make the SMP-related
+ options available to the user for configuration.
+
config SMP
bool "Symmetric Multi-Processing"
depends on CPU_V6K || CPU_V7
depends on GENERIC_CLOCKEVENTS
- depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
- ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
- ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
+ depends on HAVE_SMP
depends on MMU
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
@@ -1560,6 +1572,16 @@ config LOCAL_TIMERS
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
+config ARCH_NR_GPIO
+ int
+ default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
+ default 350 if ARCH_U8500
+ default 0
+ help
+ Maximum number of GPIOs in the system.
+
+ If unsure, leave the default value.
+
source kernel/Kconfig.preempt
config HZ
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c5213e78606..e0d236d7ff7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -100,6 +100,14 @@ choice
Note that the system will appear to hang during boot if there
is nothing connected to read from the DCC.
+ config AT91_DEBUG_LL_DBGU0
+ bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
+ depends on HAVE_AT91_DBGU0
+
+ config AT91_DEBUG_LL_DBGU1
+ bool "Kernel low-level debugging on 9263, 9g45 and cap9"
+ depends on HAVE_AT91_DBGU1
+
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
@@ -247,6 +255,43 @@ choice
their output to the standard serial port on the RealView
PB1176 platform.
+ config DEBUG_MSM_UART1
+ bool "Kernel low-level debugging messages via MSM UART1"
+ depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the first serial port on MSM devices.
+
+ config DEBUG_MSM_UART2
+ bool "Kernel low-level debugging messages via MSM UART2"
+ depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the second serial port on MSM devices.
+
+ config DEBUG_MSM_UART3
+ bool "Kernel low-level debugging messages via MSM UART3"
+ depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the third serial port on MSM devices.
+
+ config DEBUG_MSM8660_UART
+ bool "Kernel low-level debugging messages via MSM 8660 UART"
+ depends on ARCH_MSM8X60
+ select MSM_HAS_DEBUG_UART_HS
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on MSM 8660 devices.
+
+ config DEBUG_MSM8960_UART
+ bool "Kernel low-level debugging messages via MSM 8960 UART"
+ depends on ARCH_MSM8960
+ select MSM_HAS_DEBUG_UART_HS
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on MSM 8960 devices.
+
endchoice
config EARLY_PRINTK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index dfcf3b033e1..40319d91bb7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -184,7 +184,6 @@ machine-$(CONFIG_ARCH_EXYNOS4) := exynos
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
-machine-$(CONFIG_ARCH_TCC8K) := tcc8k
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
@@ -204,7 +203,6 @@ machine-$(CONFIG_ARCH_ZYNQ) := zynq
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
-plat-$(CONFIG_ARCH_TCC_926) := tcc
plat-$(CONFIG_ARCH_ZYNQ) := versatile
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 21f56ff3279..cf0a64ce4b8 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -126,7 +126,8 @@ ccflags-y := -fpic -fno-builtin -I$(obj)
asflags-y := -Wa,-march=all
# Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
+KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
+ awk 'END{print $$3}')
LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
new file mode 100644
index 00000000000..b8c476384ee
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -0,0 +1,137 @@
+/*
+ * Samsung's Exynos4210 based Origen board device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ * www.linaro.org
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4210.dtsi"
+
+/ {
+ model = "Insignal Origen evaluation board based on Exynos4210";
+ compatible = "insignal,origen", "samsung,exynos4210";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+ };
+
+ sdhci@12530000 {
+ samsung,sdhci-bus-width = <4>;
+ linux,mmc_cap_4_bit_data;
+ samsung,sdhci-cd-internal;
+ gpio-cd = <&gpk2 2 2 3 3>;
+ gpios = <&gpk2 0 2 0 3>,
+ <&gpk2 1 2 0 3>,
+ <&gpk2 3 2 3 3>,
+ <&gpk2 4 2 3 3>,
+ <&gpk2 5 2 3 3>,
+ <&gpk2 6 2 3 3>;
+ };
+
+ sdhci@12510000 {
+ samsung,sdhci-bus-width = <4>;
+ linux,mmc_cap_4_bit_data;
+ samsung,sdhci-cd-internal;
+ gpio-cd = <&gpk0 2 2 3 3>;
+ gpios = <&gpk0 0 2 0 3>,
+ <&gpk0 1 2 0 3>,
+ <&gpk0 3 2 3 3>,
+ <&gpk0 4 2 3 3>,
+ <&gpk0 5 2 3 3>,
+ <&gpk0 6 2 3 3>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ up {
+ label = "Up";
+ gpios = <&gpx2 0 0 0 2>;
+ linux,code = <103>;
+ };
+
+ down {
+ label = "Down";
+ gpios = <&gpx2 1 0 0 2>;
+ linux,code = <108>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpx1 7 0 0 2>;
+ linux,code = <158>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpx1 6 0 0 2>;
+ linux,code = <102>;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpx1 5 0 0 2>;
+ linux,code = <139>;
+ };
+ };
+
+ keypad@100A0000 {
+ status = "disabled";
+ };
+
+ sdhci@12520000 {
+ status = "disabled";
+ };
+
+ sdhci@12540000 {
+ status = "disabled";
+ };
+
+ i2c@13860000 {
+ status = "disabled";
+ };
+
+ i2c@13870000 {
+ status = "disabled";
+ };
+
+ i2c@13880000 {
+ status = "disabled";
+ };
+
+ i2c@13890000 {
+ status = "disabled";
+ };
+
+ i2c@138A0000 {
+ status = "disabled";
+ };
+
+ i2c@138B0000 {
+ status = "disabled";
+ };
+
+ i2c@138C0000 {
+ status = "disabled";
+ };
+
+ i2c@138D0000 {
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
new file mode 100644
index 00000000000..27afc8e535c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -0,0 +1,182 @@
+/*
+ * Samsung's Exynos4210 based SMDKV310 board device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ * www.linaro.org
+ *
+ * Device tree source file for Samsung's SMDKV310 board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4210.dtsi"
+
+/ {
+ model = "Samsung smdkv310 evaluation board based on Exynos4210";
+ compatible = "samsung,smdkv310", "samsung,exynos4210";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+ };
+
+ sdhci@12530000 {
+ samsung,sdhci-bus-width = <4>;
+ linux,mmc_cap_4_bit_data;
+ samsung,sdhci-cd-internal;
+ gpio-cd = <&gpk2 2 2 3 3>;
+ gpios = <&gpk2 0 2 0 3>,
+ <&gpk2 1 2 0 3>,
+ <&gpk2 3 2 3 3>,
+ <&gpk2 4 2 3 3>,
+ <&gpk2 5 2 3 3>,
+ <&gpk2 6 2 3 3>;
+ };
+
+ keypad@100A0000 {
+ samsung,keypad-num-rows = <2>;
+ samsung,keypad-num-columns = <8>;
+ linux,keypad-no-autorepeat;
+ linux,keypad-wakeup;
+
+ row-gpios = <&gpx2 0 3 3 0>,
+ <&gpx2 1 3 3 0>;
+
+ col-gpios = <&gpx1 0 3 0 0>,
+ <&gpx1 1 3 0 0>,
+ <&gpx1 2 3 0 0>,
+ <&gpx1 3 3 0 0>,
+ <&gpx1 4 3 0 0>,
+ <&gpx1 5 3 0 0>,
+ <&gpx1 6 3 0 0>,
+ <&gpx1 7 3 0 0>;
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <3>;
+ linux,code = <2>;
+ };
+
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <4>;
+ linux,code = <3>;
+ };
+
+ key_3 {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <4>;
+ };
+
+ key_4 {
+ keypad,row = <0>;
+ keypad,column = <6>;
+ linux,code = <5>;
+ };
+
+ key_5 {
+ keypad,row = <0>;
+ keypad,column = <7>;
+ linux,code = <6>;
+ };
+
+ key_a {
+ keypad,row = <1>;
+ keypad,column = <3>;
+ linux,code = <30>;
+ };
+
+ key_b {
+ keypad,row = <1>;
+ keypad,column = <4>;
+ linux,code = <48>;
+ };
+
+ key_c {
+ keypad,row = <1>;
+ keypad,column = <5>;
+ linux,code = <46>;
+ };
+
+ key_d {
+ keypad,row = <1>;
+ keypad,column = <6>;
+ linux,code = <32>;
+ };
+
+ key_e {
+ keypad,row = <1>;
+ keypad,column = <7>;
+ linux,code = <18>;
+ };
+ };
+
+ i2c@13860000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ gpios = <&gpd1 0 2 3 0>,
+ <&gpd1 1 2 3 0>;
+
+ eeprom@50 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x50>;
+ };
+
+ eeprom@52 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x52>;
+ };
+ };
+
+ sdhci@12510000 {
+ status = "disabled";
+ };
+
+ sdhci@12520000 {
+ status = "disabled";
+ };
+
+ sdhci@12540000 {
+ status = "disabled";
+ };
+
+ i2c@13870000 {
+ status = "disabled";
+ };
+
+ i2c@13880000 {
+ status = "disabled";
+ };
+
+ i2c@13890000 {
+ status = "disabled";
+ };
+
+ i2c@138A0000 {
+ status = "disabled";
+ };
+
+ i2c@138B0000 {
+ status = "disabled";
+ };
+
+ i2c@138C0000 {
+ status = "disabled";
+ };
+
+ i2c@138D0000 {
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
new file mode 100644
index 00000000000..63d7578856c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -0,0 +1,397 @@
+/*
+ * Samsung's Exynos4210 SoC device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ * www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "samsung,exynos4210";
+ interrupt-parent = <&gic>;
+
+ gic:interrupt-controller@10490000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+ };
+
+ watchdog@10060000 {
+ compatible = "samsung,s3c2410-wdt";
+ reg = <0x10060000 0x100>;
+ interrupts = <0 43 0>;
+ };
+
+ rtc@10070000 {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x10070000 0x100>;
+ interrupts = <0 44 0>, <0 45 0>;
+ };
+
+ keypad@100A0000 {
+ compatible = "samsung,s5pv210-keypad";
+ reg = <0x100A0000 0x100>;
+ interrupts = <0 109 0>;
+ };
+
+ sdhci@12510000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12510000 0x100>;
+ interrupts = <0 73 0>;
+ };
+
+ sdhci@12520000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12520000 0x100>;
+ interrupts = <0 74 0>;
+ };
+
+ sdhci@12530000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12530000 0x100>;
+ interrupts = <0 75 0>;
+ };
+
+ sdhci@12540000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12540000 0x100>;
+ interrupts = <0 76 0>;
+ };
+
+ serial@13800000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13800000 0x100>;
+ interrupts = <0 52 0>;
+ };
+
+ serial@13810000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13810000 0x100>;
+ interrupts = <0 53 0>;
+ };
+
+ serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ };
+
+ serial@13830000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13830000 0x100>;
+ interrupts = <0 55 0>;
+ };
+
+ i2c@13860000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13860000 0x100>;
+ interrupts = <0 58 0>;
+ };
+
+ i2c@13870000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13870000 0x100>;
+ interrupts = <0 59 0>;
+ };
+
+ i2c@13880000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13880000 0x100>;
+ interrupts = <0 60 0>;
+ };
+
+ i2c@13890000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13890000 0x100>;
+ interrupts = <0 61 0>;
+ };
+
+ i2c@138A0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138A0000 0x100>;
+ interrupts = <0 62 0>;
+ };
+
+ i2c@138B0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138B0000 0x100>;
+ interrupts = <0 63 0>;
+ };
+
+ i2c@138C0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138C0000 0x100>;
+ interrupts = <0 64 0>;
+ };
+
+ i2c@138D0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138D0000 0x100>;
+ interrupts = <0 65 0>;
+ };
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma0: pdma@12680000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12680000 0x1000>;
+ interrupts = <0 35 0>;
+ };
+
+ pdma1: pdma@12690000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12690000 0x1000>;
+ interrupts = <0 36 0>;
+ };
+ };
+
+ gpio-controllers {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ gpio-controller;
+ ranges;
+
+ gpa0: gpio-controller@11400000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpa1: gpio-controller@11400020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb: gpio-controller@11400040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc0: gpio-controller@11400060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc1: gpio-controller@11400080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpd0: gpio-controller@114000A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpd1: gpio-controller@114000C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe0: gpio-controller@114000E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe1: gpio-controller@11400100 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400100 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe2: gpio-controller@11400120 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400120 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe3: gpio-controller@11400140 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400140 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe4: gpio-controller@11400160 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400160 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf0: gpio-controller@11400180 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400180 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf1: gpio-controller@114001A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf2: gpio-controller@114001C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf3: gpio-controller@114001E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpj0: gpio-controller@11000000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpj1: gpio-controller@11000020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpk0: gpio-controller@11000040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpk1: gpio-controller@11000060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpk2: gpio-controller@11000080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpk3: gpio-controller@110000A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110000A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpl0: gpio-controller@110000C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110000C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpl1: gpio-controller@110000E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110000E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpl2: gpio-controller@11000100 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000100 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy0: gpio-controller@11000120 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000120 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy1: gpio-controller@11000140 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000140 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy2: gpio-controller@11000160 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000160 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy3: gpio-controller@11000180 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000180 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy4: gpio-controller@110001A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110001A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy5: gpio-controller@110001C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110001C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy6: gpio-controller@110001E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110001E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx0: gpio-controller@11000C00 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000C00 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx1: gpio-controller@11000C20 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000C20 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx2: gpio-controller@11000C40 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000C40 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx3: gpio-controller@11000C60 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000C60 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpz: gpio-controller@03860000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x03860000 0x20>;
+ #gpio-cells = <4>;
+ };
+ };
+};
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index f407a6b35d3..d8e44a43047 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -221,17 +221,6 @@
*/
#define MCODE_BUFF_PER_REQ 256
-/*
- * Mark a _pl330_req as free.
- * We do it by writing DMAEND as the first instruction
- * because no valid request is going to have DMAEND as
- * its first instruction to execute.
- */
-#define MARK_FREE(req) do { \
- _emit_END(0, (req)->mc_cpu); \
- (req)->mc_len = 0; \
- } while (0)
-
/* If the _pl330_req is available to the client */
#define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
@@ -301,8 +290,10 @@ struct pl330_thread {
struct pl330_dmac *dmac;
/* Only two at a time */
struct _pl330_req req[2];
- /* Index of the last submitted request */
+ /* Index of the last enqueued request */
unsigned lstenq;
+ /* Index of the last submitted request or -1 if the DMA is stopped */
+ int req_running;
};
enum pl330_dmac_state {
@@ -778,6 +769,22 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd,
writel(0, regs + DBGCMD);
}
+/*
+ * Mark a _pl330_req as free.
+ * We do it by writing DMAEND as the first instruction
+ * because no valid request is going to have DMAEND as
+ * its first instruction to execute.
+ */
+static void mark_free(struct pl330_thread *thrd, int idx)
+{
+ struct _pl330_req *req = &thrd->req[idx];
+
+ _emit_END(0, req->mc_cpu);
+ req->mc_len = 0;
+
+ thrd->req_running = -1;
+}
+
static inline u32 _state(struct pl330_thread *thrd)
{
void __iomem *regs = thrd->dmac->pinfo->base;
@@ -836,31 +843,6 @@ static inline u32 _state(struct pl330_thread *thrd)
}
}
-/* If the request 'req' of thread 'thrd' is currently active */
-static inline bool _req_active(struct pl330_thread *thrd,
- struct _pl330_req *req)
-{
- void __iomem *regs = thrd->dmac->pinfo->base;
- u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
-
- if (IS_FREE(req))
- return false;
-
- return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
-}
-
-/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
-static inline unsigned _thrd_active(struct pl330_thread *thrd)
-{
- if (_req_active(thrd, &thrd->req[0]))
- return 1; /* First req active */
-
- if (_req_active(thrd, &thrd->req[1]))
- return 2; /* Second req active */
-
- return 0;
-}
-
static void _stop(struct pl330_thread *thrd)
{
void __iomem *regs = thrd->dmac->pinfo->base;
@@ -892,17 +874,22 @@ static bool _trigger(struct pl330_thread *thrd)
struct _arg_GO go;
unsigned ns;
u8 insn[6] = {0, 0, 0, 0, 0, 0};
+ int idx;
/* Return if already ACTIVE */
if (_state(thrd) != PL330_STATE_STOPPED)
return true;
- if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
- req = &thrd->req[1 - thrd->lstenq];
- else if (!IS_FREE(&thrd->req[thrd->lstenq]))
- req = &thrd->req[thrd->lstenq];
- else
- req = NULL;
+ idx = 1 - thrd->lstenq;
+ if (!IS_FREE(&thrd->req[idx]))
+ req = &thrd->req[idx];
+ else {
+ idx = thrd->lstenq;
+ if (!IS_FREE(&thrd->req[idx]))
+ req = &thrd->req[idx];
+ else
+ req = NULL;
+ }
/* Return if no request */
if (!req || !req->r)
@@ -933,6 +920,8 @@ static bool _trigger(struct pl330_thread *thrd)
/* Only manager can execute GO */
_execute_DBGINSN(thrd, insn, true);
+ thrd->req_running = idx;
+
return true;
}
@@ -1382,8 +1371,8 @@ static void pl330_dotask(unsigned long data)
thrd->req[0].r = NULL;
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[0]);
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 0);
+ mark_free(thrd, 1);
/* Clear the reset flag */
pl330->dmac_tbd.reset_chan &= ~(1 << i);
@@ -1461,14 +1450,12 @@ int pl330_update(const struct pl330_info *pi)
thrd = &pl330->channels[id];
- active = _thrd_active(thrd);
- if (!active) /* Aborted */
+ active = thrd->req_running;
+ if (active == -1) /* Aborted */
continue;
- active -= 1;
-
rqdone = &thrd->req[active];
- MARK_FREE(rqdone);
+ mark_free(thrd, active);
/* Get going again ASAP */
_start(thrd);
@@ -1480,13 +1467,19 @@ int pl330_update(const struct pl330_info *pi)
/* Now that we are in no hurry, do the callbacks */
while (!list_empty(&pl330->req_done)) {
+ struct pl330_req *r;
+
rqdone = container_of(pl330->req_done.next,
struct _pl330_req, rqd);
list_del_init(&rqdone->rqd);
+ /* Detach the req */
+ r = rqdone->r;
+ rqdone->r = NULL;
+
spin_unlock_irqrestore(&pl330->lock, flags);
- _callback(rqdone->r, PL330_ERR_NONE);
+ _callback(r, PL330_ERR_NONE);
spin_lock_irqsave(&pl330->lock, flags);
}
@@ -1509,7 +1502,7 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
struct pl330_thread *thrd = ch_id;
struct pl330_dmac *pl330;
unsigned long flags;
- int ret = 0, active;
+ int ret = 0, active = thrd->req_running;
if (!thrd || thrd->free || thrd->dmac->state == DYING)
return -EINVAL;
@@ -1525,28 +1518,24 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
thrd->req[0].r = NULL;
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[0]);
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 0);
+ mark_free(thrd, 1);
break;
case PL330_OP_ABORT:
- active = _thrd_active(thrd);
-
/* Make sure the channel is stopped */
_stop(thrd);
/* ABORT is only for the active req */
- if (!active)
+ if (active == -1)
break;
- active--;
-
thrd->req[active].r = NULL;
- MARK_FREE(&thrd->req[active]);
+ mark_free(thrd, active);
/* Start the next */
case PL330_OP_START:
- if (!_thrd_active(thrd) && !_start(thrd))
+ if ((active == -1) && !_start(thrd))
ret = -EIO;
break;
@@ -1587,14 +1576,13 @@ int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
else
pstatus->faulting = false;
- active = _thrd_active(thrd);
+ active = thrd->req_running;
- if (!active) {
+ if (active == -1) {
/* Indicate that the thread is not running */
pstatus->top_req = NULL;
pstatus->wait_req = NULL;
} else {
- active--;
pstatus->top_req = thrd->req[active].r;
pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
? thrd->req[1 - active].r : NULL;
@@ -1659,9 +1647,9 @@ void *pl330_request_channel(const struct pl330_info *pi)
thrd->free = false;
thrd->lstenq = 1;
thrd->req[0].r = NULL;
- MARK_FREE(&thrd->req[0]);
+ mark_free(thrd, 0);
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 1);
break;
}
}
@@ -1767,14 +1755,14 @@ static inline void _reset_thread(struct pl330_thread *thrd)
thrd->req[0].mc_bus = pl330->mcode_bus
+ (thrd->id * pi->mcbufsz);
thrd->req[0].r = NULL;
- MARK_FREE(&thrd->req[0]);
+ mark_free(thrd, 0);
thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+ pi->mcbufsz / 2;
thrd->req[1].mc_bus = thrd->req[0].mc_bus
+ pi->mcbufsz / 2;
thrd->req[1].r = NULL;
- MARK_FREE(&thrd->req[1]);
+ mark_free(thrd, 1);
}
static int dmac_alloc_threads(struct pl330_dmac *pl330)
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 2393b5bc96f..8794a34eae6 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -143,7 +143,6 @@ static int sp804_set_next_event(unsigned long next,
}
static struct clock_event_device sp804_clockevent = {
- .shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sp804_set_mode,
.set_next_event = sp804_set_next_event,
@@ -169,13 +168,9 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
clkevt_base = base;
clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
-
evt->name = name;
evt->irq = irq;
- evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift);
- evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
- evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
setup_irq(irq, &sp804_timer_irq);
- clockevents_register_device(evt);
+ clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
}
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 77287504c8b..dcb004a804c 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -197,8 +197,8 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
v->domain.nr_irq = 32;
#ifdef CONFIG_OF_IRQ
v->domain.of_node = of_node_get(node);
- v->domain.ops = &irq_domain_simple_ops;
#endif /* CONFIG_OF */
+ v->domain.ops = &irq_domain_simple_ops;
irq_domain_add(&v->domain);
}
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index fccb4703bac..a22e9307906 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -18,9 +18,10 @@ CONFIG_ARCH_MXC=y
CONFIG_ARCH_IMX_V4_V5=y
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX25_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX25=y
+CONFIG_MACH_EUKREA_CPUIMX25SD=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_CPUIMX27=y
@@ -71,17 +72,16 @@ CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
CONFIG_DM9000=y
+CONFIG_SMC91X=y
CONFIG_SMC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
@@ -99,6 +99,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
@@ -138,6 +139,7 @@ CONFIG_MMC=y
CONFIG_MMC_MXC=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
diff --git a/arch/arm/configs/pcontrol_g20_defconfig b/arch/arm/configs/pcontrol_g20_defconfig
deleted file mode 100644
index c75c9fcede5..00000000000
--- a/arch/arm/configs/pcontrol_g20_defconfig
+++ /dev/null
@@ -1,175 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="/opt/arm-2010q1/bin/arm-none-linux-gnueabi-"
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_PCONTROL_G20=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 mem=128M mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) root=/dev/mmcblk0p1 rootwait rw"
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_AT24=m
-CONFIG_SCSI=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MACVLAN=m
-CONFIG_TUN=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-CONFIG_SMSC911X=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_MPPE=m
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_MATRIX=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_MAX3100=m
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_R3964=m
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_GPIO=m
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=m
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_W1=m
-CONFIG_W1_MASTER_GPIO=m
-CONFIG_W1_SLAVE_DS2431=m
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_AUXDISPLAY=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV=y
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_IIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index 9abe7a07d5a..fac79dceb73 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -32,7 +32,6 @@
#define __BUG(__file, __line, __value) \
do { \
- BUILD_BUG_ON(sizeof(struct bug_entry) != 12); \
asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n" \
".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
"2:\t.asciz " #__file "\n" \
diff --git a/arch/arm/include/asm/edac.h b/arch/arm/include/asm/edac.h
new file mode 100644
index 00000000000..0df7a2c1fc3
--- /dev/null
+++ b/arch/arm/include/asm/edac.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ * Based on PPC version Copyright 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef ASM_EDAC_H
+#define ASM_EDAC_H
+/*
+ * ECC atomic, DMA, SMP and interrupt safe scrub function.
+ * Implements the per arch atomic_scrub() that EDAC use for software
+ * ECC scrubbing. It reads memory and then writes back the original
+ * value, allowing the hardware to detect and correct memory errors.
+ */
+static inline void atomic_scrub(void *va, u32 size)
+{
+#if __LINUX_ARM_ARCH__ >= 6
+ unsigned int *virt_addr = va;
+ unsigned int temp, temp2;
+ unsigned int i;
+
+ for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
+ /* Very carefully read and write to memory atomically
+ * so we are interrupt, DMA and SMP safe.
+ */
+ __asm__ __volatile__("\n"
+ "1: ldrex %0, [%2]\n"
+ " strex %1, %0, [%2]\n"
+ " teq %1, #0\n"
+ " bne 1b\n"
+ : "=&r"(temp), "=&r"(temp2)
+ : "r"(virt_addr)
+ : "cc");
+ }
+#endif
+}
+
+#endif
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 11ad0bfbb0a..7151753b098 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -1,6 +1,10 @@
#ifndef _ARCH_ARM_GPIO_H
#define _ARCH_ARM_GPIO_H
+#if CONFIG_ARCH_NR_GPIO > 0
+#define ARCH_NR_GPIO CONFIG_ARCH_NR_GPIO
+#endif
+
/* not all ARM platforms necessarily support this API ... */
#include <mach/gpio.h>
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index ddf07a92a6c..436e60b2cf7 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -27,23 +27,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu);
#define arch_irq_stat_cpu smp_irq_stat_cpu
-#if NR_IRQS > 512
-#define HARDIRQ_BITS 10
-#elif NR_IRQS > 256
-#define HARDIRQ_BITS 9
-#else
-#define HARDIRQ_BITS 8
-#endif
-
-/*
- * The hardirq mask has to be large enough to have space
- * for potentially all IRQ sources in the system nesting
- * on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
#define __ARCH_IRQ_EXIT_IRQS_DISABLED 1
#endif /* __ASM_HARDIRQ_H */
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 5daea2961d4..077c32326c6 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -234,6 +234,7 @@ extern int iop3xx_get_init_atu(void);
void iop3xx_map_io(void);
void iop_init_cp6_handler(void);
void iop_init_time(unsigned long tickrate);
+void iop3xx_restart(char, const char *);
static inline u32 read_tmr0(void)
{
diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
new file mode 100644
index 00000000000..c0efdd60966
--- /dev/null
+++ b/arch/arm/include/asm/opcodes.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/include/asm/opcodes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_OPCODES_H
+#define __ASM_ARM_OPCODES_H
+
+#ifndef __ASSEMBLY__
+extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
+#endif
+
+#define ARM_OPCODE_CONDTEST_FAIL 0
+#define ARM_OPCODE_CONDTEST_PASS 1
+#define ARM_OPCODE_CONDTEST_UNCOND 2
+
+#endif /* __ASM_ARM_OPCODES_H */
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 3f2f0eb7621..f66626d71e7 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -42,13 +42,6 @@
#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
#define VMALLOC_END 0xff000000UL
-/* This is a temporary hack until shmobile's DMA area size is sorted out */
-#ifdef CONFIG_ARCH_SHMOBILE
-#warning "SH-Mobile's consistent DMA size conflicts with VMALLOC_END by 144MB"
-#undef VMALLOC_END
-#define VMALLOC_END 0xF6000000UL
-#endif
-
#define LIBRARY_TEXT_START 0x0c000000
#ifndef __ASSEMBLY__
@@ -306,6 +299,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
* We provide our own arch_get_unmapped_area to cope with VIPT caches.
*/
#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
/*
* remap a physical page `pfn' of size `size' with page protection `prot'
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index b2d9df5667a..ce280b8d613 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -123,6 +123,8 @@ static inline void prefetch(const void *ptr)
#endif
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
#endif
#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
index c8e6ddf3e86..e3f75726343 100644
--- a/arch/arm/include/asm/sched_clock.h
+++ b/arch/arm/include/asm/sched_clock.h
@@ -8,113 +8,7 @@
#ifndef ASM_SCHED_CLOCK
#define ASM_SCHED_CLOCK
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct clock_data {
- u64 epoch_ns;
- u32 epoch_cyc;
- u32 epoch_cyc_copy;
- u32 mult;
- u32 shift;
-};
-
-#define DEFINE_CLOCK_DATA(name) struct clock_data name
-
-static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
-{
- return (cyc * mult) >> shift;
-}
-
-/*
- * Atomically update the sched_clock epoch. Your update callback will
- * be called from a timer before the counter wraps - read the current
- * counter value, and call this function to safely move the epochs
- * forward. Only use this from the update callback.
- */
-static inline void update_sched_clock(struct clock_data *cd, u32 cyc, u32 mask)
-{
- unsigned long flags;
- u64 ns = cd->epoch_ns +
- cyc_to_ns((cyc - cd->epoch_cyc) & mask, cd->mult, cd->shift);
-
- /*
- * Write epoch_cyc and epoch_ns in a way that the update is
- * detectable in cyc_to_fixed_sched_clock().
- */
- raw_local_irq_save(flags);
- cd->epoch_cyc = cyc;
- smp_wmb();
- cd->epoch_ns = ns;
- smp_wmb();
- cd->epoch_cyc_copy = cyc;
- raw_local_irq_restore(flags);
-}
-
-/*
- * If your clock rate is known at compile time, using this will allow
- * you to optimize the mult/shift loads away. This is paired with
- * init_fixed_sched_clock() to ensure that your mult/shift are correct.
- */
-static inline unsigned long long cyc_to_fixed_sched_clock(struct clock_data *cd,
- u32 cyc, u32 mask, u32 mult, u32 shift)
-{
- u64 epoch_ns;
- u32 epoch_cyc;
-
- /*
- * Load the epoch_cyc and epoch_ns atomically. We do this by
- * ensuring that we always write epoch_cyc, epoch_ns and
- * epoch_cyc_copy in strict order, and read them in strict order.
- * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
- * the middle of an update, and we should repeat the load.
- */
- do {
- epoch_cyc = cd->epoch_cyc;
- smp_rmb();
- epoch_ns = cd->epoch_ns;
- smp_rmb();
- } while (epoch_cyc != cd->epoch_cyc_copy);
-
- return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, mult, shift);
-}
-
-/*
- * Otherwise, you need to use this, which will obtain the mult/shift
- * from the clock_data structure. Use init_sched_clock() with this.
- */
-static inline unsigned long long cyc_to_sched_clock(struct clock_data *cd,
- u32 cyc, u32 mask)
-{
- return cyc_to_fixed_sched_clock(cd, cyc, mask, cd->mult, cd->shift);
-}
-
-/*
- * Initialize the clock data - calculate the appropriate multiplier
- * and shift. Also setup a timer to ensure that the epoch is refreshed
- * at the appropriate time interval, which will call your update
- * handler.
- */
-void init_sched_clock(struct clock_data *, void (*)(void),
- unsigned int, unsigned long);
-
-/*
- * Use this initialization function rather than init_sched_clock() if
- * you're using cyc_to_fixed_sched_clock, which will warn if your
- * constants are incorrect.
- */
-static inline void init_fixed_sched_clock(struct clock_data *cd,
- void (*update)(void), unsigned int bits, unsigned long rate,
- u32 mult, u32 shift)
-{
- init_sched_clock(cd, update, bits, rate);
- if (cd->mult != mult || cd->shift != shift) {
- pr_crit("sched_clock: wrong multiply/shift: %u>>%u vs calculated %u>>%u\n"
- "sched_clock: fix multiply/shift to avoid scheduler hiccups\n",
- mult, shift, cd->mult, cd->shift);
- }
-}
-
extern void sched_clock_postinit(void);
+extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
#endif
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 915696dd9c7..23ebc0c82a3 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -192,11 +192,7 @@ static const struct tagtable __tagtable_##fn __tag = { tag, fn }
/*
* Memory map description
*/
-#ifdef CONFIG_ARCH_EP93XX
-# define NR_BANKS 16
-#else
-# define NR_BANKS 8
-#endif
+#define NR_BANKS CONFIG_ARM_NR_BANKS
struct membank {
phys_addr_t start;
diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index 9997ad20eff..32ee164a2f6 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -24,12 +24,13 @@
#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
-static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+static inline __attribute_const__ __u32 __arch_swahb32(__u32 x)
{
__asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
return x;
}
-#define __arch_swab16 __arch_swab16
+#define __arch_swahb32 __arch_swahb32
+#define __arch_swab16(x) ((__u16)__arch_swahb32(x))
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 53785828744..e4c96cc6ec0 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -108,7 +108,6 @@ extern void __show_regs(struct pt_regs *);
extern int __pure cpu_architecture(void);
extern void cpu_init(void);
-void arm_machine_restart(char mode, const char *cmd);
void soft_restart(unsigned long);
extern void (*arm_pm_restart)(char str, const char *cmd);
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 16eed6aebfa..43b740d0e37 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -13,7 +13,7 @@ CFLAGS_REMOVE_return_address.o = -pg
# Object file lists.
-obj-y := elf.o entry-armv.o entry-common.o irq.o \
+obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \
process.o ptrace.o return_address.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c
index e17cdd6d90d..1862d8f2fd4 100644
--- a/arch/arm/kernel/kprobes-test.c
+++ b/arch/arm/kernel/kprobes-test.c
@@ -202,6 +202,8 @@
#include <linux/slab.h>
#include <linux/kprobes.h>
+#include <asm/opcodes.h>
+
#include "kprobes.h"
#include "kprobes-test.h"
@@ -1050,65 +1052,9 @@ static int test_instance;
static unsigned long test_check_cc(int cc, unsigned long cpsr)
{
- unsigned long temp;
-
- switch (cc) {
- case 0x0: /* eq */
- return cpsr & PSR_Z_BIT;
-
- case 0x1: /* ne */
- return (~cpsr) & PSR_Z_BIT;
-
- case 0x2: /* cs */
- return cpsr & PSR_C_BIT;
-
- case 0x3: /* cc */
- return (~cpsr) & PSR_C_BIT;
-
- case 0x4: /* mi */
- return cpsr & PSR_N_BIT;
-
- case 0x5: /* pl */
- return (~cpsr) & PSR_N_BIT;
-
- case 0x6: /* vs */
- return cpsr & PSR_V_BIT;
-
- case 0x7: /* vc */
- return (~cpsr) & PSR_V_BIT;
+ int ret = arm_check_condition(cc << 28, cpsr);
- case 0x8: /* hi */
- cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
- return cpsr & PSR_C_BIT;
-
- case 0x9: /* ls */
- cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
- return (~cpsr) & PSR_C_BIT;
-
- case 0xa: /* ge */
- cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- return (~cpsr) & PSR_N_BIT;
-
- case 0xb: /* lt */
- cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- return cpsr & PSR_N_BIT;
-
- case 0xc: /* gt */
- temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
- return (~temp) & PSR_N_BIT;
-
- case 0xd: /* le */
- temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
- return temp & PSR_N_BIT;
-
- case 0xe: /* al */
- case 0xf: /* unconditional */
- return true;
- }
- BUG();
- return false;
+ return (ret != ARM_OPCODE_CONDTEST_FAIL);
}
static int is_last_scenario;
@@ -1128,7 +1074,9 @@ static unsigned long test_context_cpsr(int scenario)
if (!test_case_is_thumb) {
/* Testing ARM code */
- probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0;
+ int cc = current_instruction >> 28;
+
+ probe_should_run = test_check_cc(cc, cpsr) != 0;
if (scenario == 15)
is_last_scenario = true;
diff --git a/arch/arm/kernel/opcodes.c b/arch/arm/kernel/opcodes.c
new file mode 100644
index 00000000000..f8179c6a817
--- /dev/null
+++ b/arch/arm/kernel/opcodes.c
@@ -0,0 +1,72 @@
+/*
+ * linux/arch/arm/kernel/opcodes.c
+ *
+ * A32 condition code lookup feature moved from nwfpe/fpopcode.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <asm/opcodes.h>
+
+#define ARM_OPCODE_CONDITION_UNCOND 0xf
+
+/*
+ * condition code lookup table
+ * index into the table is test code: EQ, NE, ... LT, GT, AL, NV
+ *
+ * bit position in short is condition code: NZCV
+ */
+static const unsigned short cc_map[16] = {
+ 0xF0F0, /* EQ == Z set */
+ 0x0F0F, /* NE */
+ 0xCCCC, /* CS == C set */
+ 0x3333, /* CC */
+ 0xFF00, /* MI == N set */
+ 0x00FF, /* PL */
+ 0xAAAA, /* VS == V set */
+ 0x5555, /* VC */
+ 0x0C0C, /* HI == C set && Z clear */
+ 0xF3F3, /* LS == C clear || Z set */
+ 0xAA55, /* GE == (N==V) */
+ 0x55AA, /* LT == (N!=V) */
+ 0x0A05, /* GT == (!Z && (N==V)) */
+ 0xF5FA, /* LE == (Z || (N!=V)) */
+ 0xFFFF, /* AL always */
+ 0 /* NV */
+};
+
+/*
+ * Returns:
+ * ARM_OPCODE_CONDTEST_FAIL - if condition fails
+ * ARM_OPCODE_CONDTEST_PASS - if condition passes (including AL)
+ * ARM_OPCODE_CONDTEST_UNCOND - if NV condition, or separate unconditional
+ * opcode space from v5 onwards
+ *
+ * Code that tests whether a conditional instruction would pass its condition
+ * check should check that return value == ARM_OPCODE_CONDTEST_PASS.
+ *
+ * Code that tests if a condition means that the instruction would be executed
+ * (regardless of conditional or unconditional) should instead check that the
+ * return value != ARM_OPCODE_CONDTEST_FAIL.
+ */
+asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr)
+{
+ u32 cc_bits = opcode >> 28;
+ u32 psr_cond = psr >> 28;
+ unsigned int ret;
+
+ if (cc_bits != ARM_OPCODE_CONDITION_UNCOND) {
+ if ((cc_map[cc_bits] >> (psr_cond)) & 1)
+ ret = ARM_OPCODE_CONDTEST_PASS;
+ else
+ ret = ARM_OPCODE_CONDTEST_FAIL;
+ } else {
+ ret = ARM_OPCODE_CONDTEST_UNCOND;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(arm_check_condition);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 423bb201945..b29776aa658 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -147,14 +147,8 @@ void soft_restart(unsigned long addr)
BUG();
}
-void arm_machine_restart(char mode, const char *cmd)
+static void null_restart(char mode, const char *cmd)
{
- /* Disable interrupts first */
- local_irq_disable();
- local_fiq_disable();
-
- /* Call the architecture specific reboot code. */
- arch_reset(mode, cmd);
}
/*
@@ -163,7 +157,7 @@ void arm_machine_restart(char mode, const char *cmd)
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
-void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
+void (*arm_pm_restart)(char str, const char *cmd) = null_restart;
EXPORT_SYMBOL_GPL(arm_pm_restart);
static void do_nothing(void *unused)
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index 9a46370fe9d..5416c7c1252 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -14,61 +14,153 @@
#include <asm/sched_clock.h>
+struct clock_data {
+ u64 epoch_ns;
+ u32 epoch_cyc;
+ u32 epoch_cyc_copy;
+ u32 mult;
+ u32 shift;
+};
+
static void sched_clock_poll(unsigned long wrap_ticks);
static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0);
-static void (*sched_clock_update_fn)(void);
+
+static struct clock_data cd = {
+ .mult = NSEC_PER_SEC / HZ,
+};
+
+static u32 __read_mostly sched_clock_mask = 0xffffffff;
+
+static u32 notrace jiffy_sched_clock_read(void)
+{
+ return (u32)(jiffies - INITIAL_JIFFIES);
+}
+
+static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
+
+static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
+{
+ return (cyc * mult) >> shift;
+}
+
+static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
+{
+ u64 epoch_ns;
+ u32 epoch_cyc;
+
+ /*
+ * Load the epoch_cyc and epoch_ns atomically. We do this by
+ * ensuring that we always write epoch_cyc, epoch_ns and
+ * epoch_cyc_copy in strict order, and read them in strict order.
+ * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
+ * the middle of an update, and we should repeat the load.
+ */
+ do {
+ epoch_cyc = cd.epoch_cyc;
+ smp_rmb();
+ epoch_ns = cd.epoch_ns;
+ smp_rmb();
+ } while (epoch_cyc != cd.epoch_cyc_copy);
+
+ return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, cd.mult, cd.shift);
+}
+
+/*
+ * Atomically update the sched_clock epoch.
+ */
+static void notrace update_sched_clock(void)
+{
+ unsigned long flags;
+ u32 cyc;
+ u64 ns;
+
+ cyc = read_sched_clock();
+ ns = cd.epoch_ns +
+ cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask,
+ cd.mult, cd.shift);
+ /*
+ * Write epoch_cyc and epoch_ns in a way that the update is
+ * detectable in cyc_to_fixed_sched_clock().
+ */
+ raw_local_irq_save(flags);
+ cd.epoch_cyc = cyc;
+ smp_wmb();
+ cd.epoch_ns = ns;
+ smp_wmb();
+ cd.epoch_cyc_copy = cyc;
+ raw_local_irq_restore(flags);
+}
static void sched_clock_poll(unsigned long wrap_ticks)
{
mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks));
- sched_clock_update_fn();
+ update_sched_clock();
}
-void __init init_sched_clock(struct clock_data *cd, void (*update)(void),
- unsigned int clock_bits, unsigned long rate)
+void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
{
unsigned long r, w;
u64 res, wrap;
char r_unit;
- sched_clock_update_fn = update;
+ BUG_ON(bits > 32);
+ WARN_ON(!irqs_disabled());
+ WARN_ON(read_sched_clock != jiffy_sched_clock_read);
+ read_sched_clock = read;
+ sched_clock_mask = (1 << bits) - 1;
/* calculate the mult/shift to convert counter ticks to ns. */
- clocks_calc_mult_shift(&cd->mult, &cd->shift, rate, NSEC_PER_SEC, 0);
+ clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0);
r = rate;
if (r >= 4000000) {
r /= 1000000;
r_unit = 'M';
- } else {
+ } else if (r >= 1000) {
r /= 1000;
r_unit = 'k';
- }
+ } else
+ r_unit = ' ';
/* calculate how many ns until we wrap */
- wrap = cyc_to_ns((1ULL << clock_bits) - 1, cd->mult, cd->shift);
+ wrap = cyc_to_ns((1ULL << bits) - 1, cd.mult, cd.shift);
do_div(wrap, NSEC_PER_MSEC);
w = wrap;
/* calculate the ns resolution of this counter */
- res = cyc_to_ns(1ULL, cd->mult, cd->shift);
+ res = cyc_to_ns(1ULL, cd.mult, cd.shift);
pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n",
- clock_bits, r, r_unit, res, w);
+ bits, r, r_unit, res, w);
/*
* Start the timer to keep sched_clock() properly updated and
* sets the initial epoch.
*/
sched_clock_timer.data = msecs_to_jiffies(w - (w / 10));
- update();
+ update_sched_clock();
/*
* Ensure that sched_clock() starts off at 0ns
*/
- cd->epoch_ns = 0;
+ cd.epoch_ns = 0;
+
+ pr_debug("Registered %pF as sched_clock source\n", read);
+}
+
+unsigned long long notrace sched_clock(void)
+{
+ u32 cyc = read_sched_clock();
+ return cyc_to_sched_clock(cyc, sched_clock_mask);
}
void __init sched_clock_postinit(void)
{
+ /*
+ * If no sched_clock function has been provided at that point,
+ * make it the final one one.
+ */
+ if (read_sched_clock == jiffy_sched_clock_read)
+ setup_sched_clock(jiffy_sched_clock_read, 32, HZ);
+
sched_clock_poll(sched_clock_timer.data);
}
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index a8a6682d6b5..c8e938553d4 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -10,8 +10,11 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/err.h>
#include <linux/smp.h>
#include <linux/jiffies.h>
#include <linux/clockchips.h>
@@ -25,6 +28,7 @@
/* set up by the platform code */
void __iomem *twd_base;
+static struct clk *twd_clk;
static unsigned long twd_timer_rate;
static struct clock_event_device __percpu **twd_evt;
@@ -89,6 +93,52 @@ void twd_timer_stop(struct clock_event_device *clk)
disable_percpu_irq(clk->irq);
}
+#ifdef CONFIG_CPU_FREQ
+
+/*
+ * Updates clockevent frequency when the cpu frequency changes.
+ * Called on the cpu that is changing frequency with interrupts disabled.
+ */
+static void twd_update_frequency(void *data)
+{
+ twd_timer_rate = clk_get_rate(twd_clk);
+
+ clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate);
+}
+
+static int twd_cpufreq_transition(struct notifier_block *nb,
+ unsigned long state, void *data)
+{
+ struct cpufreq_freqs *freqs = data;
+
+ /*
+ * The twd clock events must be reprogrammed to account for the new
+ * frequency. The timer is local to a cpu, so cross-call to the
+ * changing cpu.
+ */
+ if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
+ smp_call_function_single(freqs->cpu, twd_update_frequency,
+ NULL, 1);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block twd_cpufreq_nb = {
+ .notifier_call = twd_cpufreq_transition,
+};
+
+static int twd_cpufreq_init(void)
+{
+ if (!IS_ERR(twd_clk))
+ return cpufreq_register_notifier(&twd_cpufreq_nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+
+ return 0;
+}
+core_initcall(twd_cpufreq_init);
+
+#endif
+
static void __cpuinit twd_calibrate_rate(void)
{
unsigned long count;
@@ -140,6 +190,35 @@ static irqreturn_t twd_handler(int irq, void *dev_id)
return IRQ_NONE;
}
+static struct clk *twd_get_clock(void)
+{
+ struct clk *clk;
+ int err;
+
+ clk = clk_get_sys("smp_twd", NULL);
+ if (IS_ERR(clk)) {
+ pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk));
+ return clk;
+ }
+
+ err = clk_prepare(clk);
+ if (err) {
+ pr_err("smp_twd: clock failed to prepare: %d\n", err);
+ clk_put(clk);
+ return ERR_PTR(err);
+ }
+
+ err = clk_enable(clk);
+ if (err) {
+ pr_err("smp_twd: clock failed to enable: %d\n", err);
+ clk_unprepare(clk);
+ clk_put(clk);
+ return ERR_PTR(err);
+ }
+
+ return clk;
+}
+
/*
* Setup the local clock events for a CPU.
*/
@@ -165,7 +244,13 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
}
}
- twd_calibrate_rate();
+ if (!twd_clk)
+ twd_clk = twd_get_clock();
+
+ if (!IS_ERR_OR_NULL(twd_clk))
+ twd_timer_rate = clk_get_rate(twd_clk);
+ else
+ twd_calibrate_rate();
clk->name = "local_timer";
clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
@@ -173,15 +258,11 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
clk->rating = 350;
clk->set_mode = twd_set_mode;
clk->set_next_event = twd_set_next_event;
- clk->shift = 20;
- clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
- clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
- clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
this_cpu_clk = __this_cpu_ptr(twd_evt);
*this_cpu_clk = clk;
- clockevents_register_device(clk);
-
+ clockevents_config_and_register(clk, twd_timer_rate,
+ 0xf, 0xffffffff);
enable_percpu_irq(clk->irq, 0);
}
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 5f452f8fde0..df745188f5d 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -25,6 +25,7 @@
#include <linux/syscalls.h>
#include <linux/perf_event.h>
+#include <asm/opcodes.h>
#include <asm/traps.h>
#include <asm/uaccess.h>
@@ -185,6 +186,21 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc);
+ res = arm_check_condition(instr, regs->ARM_cpsr);
+ switch (res) {
+ case ARM_OPCODE_CONDTEST_PASS:
+ break;
+ case ARM_OPCODE_CONDTEST_FAIL:
+ /* Condition failed - return to next instruction */
+ regs->ARM_pc += 4;
+ return 0;
+ case ARM_OPCODE_CONDTEST_UNCOND:
+ /* If unconditional encoding - not a SWP, undef */
+ return -EFAULT;
+ default:
+ return -EINVAL;
+ }
+
if (current->pid != previous_pid) {
pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n",
current->comm, (unsigned long)current->pid);
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
index 30e302d33e0..01ec453bb92 100644
--- a/arch/arm/kernel/tcm.c
+++ b/arch/arm/kernel/tcm.c
@@ -180,9 +180,9 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
*/
void __init tcm_init(void)
{
- u32 tcm_status = read_cpuid_tcmstatus();
- u8 dtcm_banks = (tcm_status >> 16) & 0x03;
- u8 itcm_banks = (tcm_status & 0x03);
+ u32 tcm_status;
+ u8 dtcm_banks;
+ u8 itcm_banks;
size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data;
size_t itcm_code_sz = &__eitcm_text - &__sitcm_text;
char *start;
@@ -191,6 +191,22 @@ void __init tcm_init(void)
int ret;
int i;
+ /*
+ * Prior to ARMv5 there is no TCM, and trying to read the status
+ * register will hang the processor.
+ */
+ if (cpu_architecture() < CPU_ARCH_ARMv5) {
+ if (dtcm_code_sz || itcm_code_sz)
+ pr_info("CPU TCM: %u bytes of DTCM and %u bytes of "
+ "ITCM code compiled in, but no TCM present "
+ "in pre-v5 CPU\n", dtcm_code_sz, itcm_code_sz);
+ return;
+ }
+
+ tcm_status = read_cpuid_tcmstatus();
+ dtcm_banks = (tcm_status >> 16) & 0x03;
+ itcm_banks = (tcm_status & 0x03);
+
/* Values greater than 2 for D/ITCM banks are "reserved" */
if (dtcm_banks > 2)
dtcm_banks = 0;
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index d111c3e9924..4f991f29528 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -3,6 +3,12 @@ if ARCH_AT91
config HAVE_AT91_DATAFLASH_CARD
bool
+config HAVE_AT91_DBGU0
+ bool
+
+config HAVE_AT91_DBGU1
+ bool
+
config HAVE_AT91_USART3
bool
@@ -21,12 +27,14 @@ config ARCH_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
+ select HAVE_AT91_DBGU0
select HAVE_AT91_USART3
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select HAVE_AT91_DBGU0
select HAVE_AT91_USART3
select HAVE_AT91_USART4
select HAVE_AT91_USART5
@@ -37,11 +45,13 @@ config ARCH_AT91SAM9261
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
+ select HAVE_AT91_DBGU0
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
config ARCH_AT91SAM9263
@@ -50,6 +60,7 @@ config ARCH_AT91SAM9263
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
select HAVE_NET_MACB
+ select HAVE_AT91_DBGU1
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
@@ -57,11 +68,13 @@ config ARCH_AT91SAM9RL
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
+ select HAVE_AT91_DBGU0
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select HAVE_AT91_DBGU0
select HAVE_AT91_USART3
select HAVE_AT91_USART4
select HAVE_AT91_USART5
@@ -74,6 +87,7 @@ config ARCH_AT91SAM9G45
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
select HAVE_NET_MACB
+ select HAVE_AT91_DBGU1
config ARCH_AT91CAP9
bool "AT91CAP9"
@@ -81,6 +95,7 @@ config ARCH_AT91CAP9
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
select HAVE_NET_MACB
+ select HAVE_AT91_DBGU1
config ARCH_AT91X40
bool "AT91x40"
@@ -510,8 +525,13 @@ config AT91_TIMER_HZ
choice
prompt "Select a UART for early kernel messages"
-config AT91_EARLY_DBGU
- bool "DBGU"
+config AT91_EARLY_DBGU0
+ bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
+ depends on HAVE_AT91_DBGU0
+
+config AT91_EARLY_DBGU1
+ bool "DBGU on 9263, 9g45 and cap9"
+ depends on HAVE_AT91_DBGU1
config AT91_EARLY_USART0
bool "USART0"
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index ecdd54dd68c..edb879ac04c 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -13,7 +13,6 @@
*/
#include <linux/module.h>
-#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -23,11 +22,11 @@
#include <mach/at91cap9.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
+#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@@ -137,7 +136,7 @@ static struct clk pwm_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
- .name = "macb_clk",
+ .name = "pclk",
.pmc_mask = 1 << AT91CAP9_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -210,6 +209,8 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
+ /* One additional fake clock for macb_hclk */
+ CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
@@ -221,6 +222,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+ CLKDEV_CON_ID("pioA", &pioABCD_clk),
+ CLKDEV_CON_ID("pioB", &pioABCD_clk),
+ CLKDEV_CON_ID("pioC", &pioABCD_clk),
+ CLKDEV_CON_ID("pioD", &pioABCD_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -293,37 +298,27 @@ void __init at91cap9_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
-static struct at91_gpio_bank at91cap9_gpio[] = {
+static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
{
.id = AT91CAP9_ID_PIOABCD,
- .offset = AT91_PIOA,
- .clock = &pioABCD_clk,
+ .regbase = AT91CAP9_BASE_PIOA,
}, {
.id = AT91CAP9_ID_PIOABCD,
- .offset = AT91_PIOB,
- .clock = &pioABCD_clk,
+ .regbase = AT91CAP9_BASE_PIOB,
}, {
.id = AT91CAP9_ID_PIOABCD,
- .offset = AT91_PIOC,
- .clock = &pioABCD_clk,
+ .regbase = AT91CAP9_BASE_PIOC,
}, {
.id = AT91CAP9_ID_PIOABCD,
- .offset = AT91_PIOD,
- .clock = &pioABCD_clk,
+ .regbase = AT91CAP9_BASE_PIOD,
}
};
-static void at91cap9_reset(void)
+static void at91cap9_restart(char mode, const char *cmd)
{
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
-static void at91cap9_poweroff(void)
-{
- at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
/* --------------------------------------------------------------------
* AT91CAP9 processor initialization
* -------------------------------------------------------------------- */
@@ -333,10 +328,16 @@ static void __init at91cap9_map_io(void)
at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE);
}
+static void __init at91cap9_ioremap_registers(void)
+{
+ at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
+ at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
+ at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
+}
+
static void __init at91cap9_initialize(void)
{
- at91_arch_reset = at91cap9_reset;
- pm_power_off = at91cap9_poweroff;
+ arm_pm_restart = at91cap9_restart;
at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
/* Register GPIO subsystem */
@@ -394,6 +395,7 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91cap9_soc = {
.map_io = at91cap9_map_io,
.default_irq_priority = at91cap9_default_irq_priority,
+ .ioremap_registers = at91cap9_ioremap_registers,
.register_clocks = at91cap9_register_clocks,
.init = at91cap9_initialize,
};
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index adad70db70e..d298fb7cb21 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -76,7 +76,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
- if (data->vbus_pin[i])
+ if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i], 0);
}
@@ -179,7 +179,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
- if (data && data->vbus_pin > 0) {
+ if (data && gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@@ -200,7 +200,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@@ -227,12 +227,12 @@ static struct platform_device at91cap9_eth_device = {
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
- if (data->phy_irq_pin) {
+ if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
@@ -264,7 +264,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
platform_device_register(&at91cap9_eth_device);
}
#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
@@ -332,13 +332,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
- if (data->det_pin) {
+ if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
- if (data->wp_pin)
+ if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
- if (data->vcc_pin)
+ if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
if (mmc_id == 0) { /* MCI0 */
@@ -398,8 +398,8 @@ static struct resource nand_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_BASE_SYS + AT91_ECC,
- .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+ .start = AT91CAP9_BASE_ECC,
+ .end = AT91CAP9_BASE_ECC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -425,15 +425,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
/* enable pin */
- if (data->enable_pin)
+ if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
- if (data->rdy_pin)
+ if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
- if (data->det_pin)
+ if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
nand_data = *data;
@@ -670,8 +670,8 @@ static void __init at91_add_device_tc(void) { }
static struct resource rtt_resources[] = {
{
- .start = AT91_BASE_SYS + AT91_RTT,
- .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .start = AT91CAP9_BASE_RTT,
+ .end = AT91CAP9_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -694,10 +694,19 @@ static void __init at91_add_device_rtt(void)
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+ {
+ .start = AT91CAP9_BASE_WDT,
+ .end = AT91CAP9_BASE_WDT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
static struct platform_device at91cap9_wdt_device = {
.name = "at91_wdt",
.id = -1,
- .num_resources = 0,
+ .resource = wdt_resources,
+ .num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@@ -807,7 +816,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
/* reset */
- if (data->reset_pin)
+ if (gpio_is_valid(data->reset_pin))
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
@@ -1021,8 +1030,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_BASE_SYS + AT91_DBGU,
- .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91CAP9_BASE_DBGU,
+ .end = AT91CAP9_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 713d3bdbd28..99c3174e24a 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -23,6 +23,7 @@
#include "soc.h"
#include "generic.h"
#include "clock.h"
+#include "sam9_smc.h"
static struct map_desc at91rm9200_io_desc[] __initdata = {
{
@@ -195,6 +196,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+ CLKDEV_CON_ID("pioA", &pioA_clk),
+ CLKDEV_CON_ID("pioB", &pioB_clk),
+ CLKDEV_CON_ID("pioC", &pioC_clk),
+ CLKDEV_CON_ID("pioD", &pioD_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -268,27 +273,23 @@ void __init at91rm9200_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
-static struct at91_gpio_bank at91rm9200_gpio[] = {
+static struct at91_gpio_bank at91rm9200_gpio[] __initdata = {
{
.id = AT91RM9200_ID_PIOA,
- .offset = AT91_PIOA,
- .clock = &pioA_clk,
+ .regbase = AT91RM9200_BASE_PIOA,
}, {
.id = AT91RM9200_ID_PIOB,
- .offset = AT91_PIOB,
- .clock = &pioB_clk,
+ .regbase = AT91RM9200_BASE_PIOB,
}, {
.id = AT91RM9200_ID_PIOC,
- .offset = AT91_PIOC,
- .clock = &pioC_clk,
+ .regbase = AT91RM9200_BASE_PIOC,
}, {
.id = AT91RM9200_ID_PIOD,
- .offset = AT91_PIOD,
- .clock = &pioD_clk,
+ .regbase = AT91RM9200_BASE_PIOD,
}
};
-static void at91rm9200_reset(void)
+static void at91rm9200_restart(char mode, const char *cmd)
{
/*
* Perform a hardware reset with the use of the Watchdog timer.
@@ -307,9 +308,13 @@ static void __init at91rm9200_map_io(void)
iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
}
+static void __init at91rm9200_ioremap_registers(void)
+{
+}
+
static void __init at91rm9200_initialize(void)
{
- at91_arch_reset = at91rm9200_reset;
+ arm_pm_restart = at91rm9200_restart;
at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
@@ -366,6 +371,7 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91rm9200_soc = {
.map_io = at91rm9200_map_io,
.default_irq_priority = at91rm9200_default_irq_priority,
+ .ioremap_registers = at91rm9200_ioremap_registers,
.register_clocks = at91rm9200_register_clocks,
.init = at91rm9200_initialize,
};
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index ad930688358..18bacec2b09 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -114,11 +114,11 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
if (!data)
return;
- if (data->vbus_pin) {
+ if (gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
}
- if (data->pullup_pin)
+ if (gpio_is_valid(data->pullup_pin))
at91_set_gpio_output(data->pullup_pin, 0);
udc_data = *data;
@@ -135,7 +135,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@@ -162,12 +162,12 @@ static struct platform_device at91rm9200_eth_device = {
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
- if (data->phy_irq_pin) {
+ if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
@@ -199,7 +199,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
platform_device_register(&at91rm9200_eth_device);
}
#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
@@ -260,7 +260,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
);
/* input/irq */
- if (data->irq_pin) {
+ if (gpio_is_valid(data->irq_pin)) {
at91_set_gpio_input(data->irq_pin, 1);
at91_set_deglitch(data->irq_pin, 1);
}
@@ -268,7 +268,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
at91_set_deglitch(data->det_pin, 1);
/* outputs, initially off */
- if (data->vcc_pin)
+ if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
at91_set_gpio_output(data->rst_pin, 0);
@@ -328,13 +328,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
- if (data->det_pin) {
+ if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
- if (data->wp_pin)
+ if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
- if (data->vcc_pin)
+ if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
@@ -419,15 +419,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
);
/* enable pin */
- if (data->enable_pin)
+ if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
- if (data->rdy_pin)
+ if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
- if (data->det_pin)
+ if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */
@@ -665,10 +665,24 @@ static void __init at91_add_device_tc(void) { }
* -------------------------------------------------------------------- */
#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_RTC,
+ .end = AT91RM9200_BASE_RTC + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct platform_device at91rm9200_rtc_device = {
.name = "at91_rtc",
.id = -1,
- .num_resources = 0,
+ .resource = rtc_resources,
+ .num_resources = ARRAY_SIZE(rtc_resources),
};
static void __init at91_add_device_rtc(void)
@@ -877,8 +891,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_BASE_SYS + AT91_DBGU,
- .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91RM9200_BASE_DBGU,
+ .end = AT91RM9200_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 1dd69c85dfe..a028cdf8f97 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -32,6 +32,8 @@ static unsigned long last_crtr;
static u32 irqmask;
static struct clock_event_device clkevt;
+#define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ)
+
/*
* The ST_CRTR is updated asynchronously to the master clock ... but
* the updates as seen by the CPU don't seem to be strictly monotonic.
@@ -74,8 +76,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
if (sr & AT91_ST_PITS) {
u32 crtr = read_CRTR();
- while (((crtr - last_crtr) & AT91_ST_CRTV) >= LATCH) {
- last_crtr += LATCH;
+ while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) {
+ last_crtr += RM9200_TIMER_LATCH;
clkevt.event_handler(&clkevt);
}
return IRQ_HANDLED;
@@ -116,7 +118,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
case CLOCK_EVT_MODE_PERIODIC:
/* PIT for periodic irqs; fixed rate of 1/HZ */
irqmask = AT91_ST_PITS;
- at91_sys_write(AT91_ST_PIMR, LATCH);
+ at91_sys_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* ALM for oneshot irqs, set by next_event()
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 0d20677fbef..5e46e4a9643 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -11,7 +11,6 @@
*/
#include <linux/module.h>
-#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -21,11 +20,11 @@
#include <mach/at91sam9260.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
+#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@@ -120,7 +119,7 @@ static struct clk ohci_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
- .name = "macb_clk",
+ .name = "pclk",
.pmc_mask = 1 << AT91SAM9260_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -190,6 +189,8 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
+ /* One additional fake clock for macb_hclk */
+ CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
@@ -209,6 +210,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+ CLKDEV_CON_ID("pioA", &pioA_clk),
+ CLKDEV_CON_ID("pioB", &pioB_clk),
+ CLKDEV_CON_ID("pioC", &pioC_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -270,28 +274,19 @@ void __init at91sam9260_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
-static struct at91_gpio_bank at91sam9260_gpio[] = {
+static struct at91_gpio_bank at91sam9260_gpio[] __initdata = {
{
.id = AT91SAM9260_ID_PIOA,
- .offset = AT91_PIOA,
- .clock = &pioA_clk,
+ .regbase = AT91SAM9260_BASE_PIOA,
}, {
.id = AT91SAM9260_ID_PIOB,
- .offset = AT91_PIOB,
- .clock = &pioB_clk,
+ .regbase = AT91SAM9260_BASE_PIOB,
}, {
.id = AT91SAM9260_ID_PIOC,
- .offset = AT91_PIOC,
- .clock = &pioC_clk,
+ .regbase = AT91SAM9260_BASE_PIOC,
}
};
-static void at91sam9260_poweroff(void)
-{
- at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
/* --------------------------------------------------------------------
* AT91SAM9260 processor initialization
* -------------------------------------------------------------------- */
@@ -325,10 +320,16 @@ static void __init at91sam9260_map_io(void)
}
}
+static void __init at91sam9260_ioremap_registers(void)
+{
+ at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
+ at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
+ at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
+}
+
static void __init at91sam9260_initialize(void)
{
- at91_arch_reset = at91sam9_alt_reset;
- pm_power_off = at91sam9260_poweroff;
+ arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
@@ -381,6 +382,7 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9260_soc = {
.map_io = at91sam9260_map_io,
.default_irq_priority = at91sam9260_default_irq_priority,
+ .ioremap_registers = at91sam9260_ioremap_registers,
.register_clocks = at91sam9260_register_clocks,
.init = at91sam9260_initialize,
};
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 629fa977497..642ccb6d26b 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -115,7 +115,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
if (!data)
return;
- if (data->vbus_pin) {
+ if (gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
}
@@ -136,7 +136,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@@ -163,12 +163,12 @@ static struct platform_device at91sam9260_eth_device = {
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
- if (data->phy_irq_pin) {
+ if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
@@ -200,7 +200,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
platform_device_register(&at91sam9260_eth_device);
}
#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
@@ -243,13 +243,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
- if (data->det_pin) {
+ if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
- if (data->wp_pin)
+ if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
- if (data->vcc_pin)
+ if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
@@ -330,11 +330,11 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
if (data->slot[i].bus_width) {
/* input/irq */
- if (data->slot[i].detect_pin) {
+ if (gpio_is_valid(data->slot[i].detect_pin)) {
at91_set_gpio_input(data->slot[i].detect_pin, 1);
at91_set_deglitch(data->slot[i].detect_pin, 1);
}
- if (data->slot[i].wp_pin)
+ if (gpio_is_valid(data->slot[i].wp_pin))
at91_set_gpio_input(data->slot[i].wp_pin, 1);
switch (i) {
@@ -399,8 +399,8 @@ static struct resource nand_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_BASE_SYS + AT91_ECC,
- .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+ .start = AT91SAM9260_BASE_ECC,
+ .end = AT91SAM9260_BASE_ECC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -426,15 +426,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
- if (data->enable_pin)
+ if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
- if (data->rdy_pin)
+ if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
- if (data->det_pin)
+ if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
nand_data = *data;
@@ -714,8 +714,8 @@ static void __init at91_add_device_tc(void) { }
static struct resource rtt_resources[] = {
{
- .start = AT91_BASE_SYS + AT91_RTT,
- .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .start = AT91SAM9260_BASE_RTT,
+ .end = AT91SAM9260_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -738,10 +738,19 @@ static void __init at91_add_device_rtt(void)
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+ {
+ .start = AT91SAM9260_BASE_WDT,
+ .end = AT91SAM9260_BASE_WDT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
static struct platform_device at91sam9260_wdt_device = {
.name = "at91_wdt",
.id = -1,
- .num_resources = 0,
+ .resource = wdt_resources,
+ .num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@@ -837,8 +846,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_BASE_SYS + AT91_DBGU,
- .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91SAM9260_BASE_DBGU,
+ .end = AT91SAM9260_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -1281,17 +1290,17 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa);
- if (data->rst_pin) {
+ if (gpio_is_valid(data->rst_pin)) {
at91_set_multi_drive(data->rst_pin, 0);
at91_set_gpio_output(data->rst_pin, 1);
}
- if (data->irq_pin) {
+ if (gpio_is_valid(data->irq_pin)) {
at91_set_gpio_input(data->irq_pin, 0);
at91_set_deglitch(data->irq_pin, 1);
}
- if (data->det_pin) {
+ if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 0);
at91_set_deglitch(data->det_pin, 1);
}
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 658a5185abf..b85b9ea6017 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -11,7 +11,6 @@
*/
#include <linux/module.h>
-#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -20,11 +19,11 @@
#include <mach/at91sam9261.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
+#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@@ -176,6 +175,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
+ CLKDEV_CON_ID("pioA", &pioA_clk),
+ CLKDEV_CON_ID("pioB", &pioB_clk),
+ CLKDEV_CON_ID("pioC", &pioC_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -251,28 +253,19 @@ void __init at91sam9261_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
-static struct at91_gpio_bank at91sam9261_gpio[] = {
+static struct at91_gpio_bank at91sam9261_gpio[] __initdata = {
{
.id = AT91SAM9261_ID_PIOA,
- .offset = AT91_PIOA,
- .clock = &pioA_clk,
+ .regbase = AT91SAM9261_BASE_PIOA,
}, {
.id = AT91SAM9261_ID_PIOB,
- .offset = AT91_PIOB,
- .clock = &pioB_clk,
+ .regbase = AT91SAM9261_BASE_PIOB,
}, {
.id = AT91SAM9261_ID_PIOC,
- .offset = AT91_PIOC,
- .clock = &pioC_clk,
+ .regbase = AT91SAM9261_BASE_PIOC,
}
};
-static void at91sam9261_poweroff(void)
-{
- at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
/* --------------------------------------------------------------------
* AT91SAM9261 processor initialization
* -------------------------------------------------------------------- */
@@ -285,10 +278,16 @@ static void __init at91sam9261_map_io(void)
at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE);
}
+static void __init at91sam9261_ioremap_registers(void)
+{
+ at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
+ at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
+ at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
+}
+
static void __init at91sam9261_initialize(void)
{
- at91_arch_reset = at91sam9_alt_reset;
- pm_power_off = at91sam9261_poweroff;
+ arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);
@@ -341,6 +340,7 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9261_soc = {
.map_io = at91sam9261_map_io,
.default_irq_priority = at91sam9261_default_irq_priority,
+ .ioremap_registers = at91sam9261_ioremap_registers,
.register_clocks = at91sam9261_register_clocks,
.init = at91sam9261_initialize,
};
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index a178b58b0b9..fc59cbdb0e3 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -118,7 +118,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
if (!data)
return;
- if (data->vbus_pin) {
+ if (gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
}
@@ -171,13 +171,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
- if (data->det_pin) {
+ if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
- if (data->wp_pin)
+ if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
- if (data->vcc_pin)
+ if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
@@ -240,15 +240,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
- if (data->enable_pin)
+ if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
- if (data->rdy_pin)
+ if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
- if (data->det_pin)
+ if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
@@ -600,8 +600,8 @@ static void __init at91_add_device_tc(void) { }
static struct resource rtt_resources[] = {
{
- .start = AT91_BASE_SYS + AT91_RTT,
- .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .start = AT91SAM9261_BASE_RTT,
+ .end = AT91SAM9261_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -624,10 +624,19 @@ static void __init at91_add_device_rtt(void)
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+ {
+ .start = AT91SAM9261_BASE_WDT,
+ .end = AT91SAM9261_BASE_WDT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
static struct platform_device at91sam9261_wdt_device = {
.name = "at91_wdt",
.id = -1,
- .num_resources = 0,
+ .resource = wdt_resources,
+ .num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@@ -816,8 +825,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_BASE_SYS + AT91_DBGU,
- .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91SAM9261_BASE_DBGU,
+ .end = AT91SAM9261_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index f83fbb0ee0c..79e3669b111 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -11,7 +11,6 @@
*/
#include <linux/module.h>
-#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -19,11 +18,11 @@
#include <mach/at91sam9263.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
+#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@@ -118,7 +117,7 @@ static struct clk pwm_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
- .name = "macb_clk",
+ .name = "pclk",
.pmc_mask = 1 << AT91SAM9263_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -182,6 +181,8 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
+ /* One additional fake clock for macb_hclk */
+ CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
@@ -191,6 +192,11 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+ CLKDEV_CON_ID("pioA", &pioA_clk),
+ CLKDEV_CON_ID("pioB", &pioB_clk),
+ CLKDEV_CON_ID("pioC", &pioCDE_clk),
+ CLKDEV_CON_ID("pioD", &pioCDE_clk),
+ CLKDEV_CON_ID("pioE", &pioCDE_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -263,36 +269,25 @@ void __init at91sam9263_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
-static struct at91_gpio_bank at91sam9263_gpio[] = {
+static struct at91_gpio_bank at91sam9263_gpio[] __initdata = {
{
.id = AT91SAM9263_ID_PIOA,
- .offset = AT91_PIOA,
- .clock = &pioA_clk,
+ .regbase = AT91SAM9263_BASE_PIOA,
}, {
.id = AT91SAM9263_ID_PIOB,
- .offset = AT91_PIOB,
- .clock = &pioB_clk,
+ .regbase = AT91SAM9263_BASE_PIOB,
}, {
.id = AT91SAM9263_ID_PIOCDE,
- .offset = AT91_PIOC,
- .clock = &pioCDE_clk,
+ .regbase = AT91SAM9263_BASE_PIOC,
}, {
.id = AT91SAM9263_ID_PIOCDE,
- .offset = AT91_PIOD,
- .clock = &pioCDE_clk,
+ .regbase = AT91SAM9263_BASE_PIOD,
}, {
.id = AT91SAM9263_ID_PIOCDE,
- .offset = AT91_PIOE,
- .clock = &pioCDE_clk,
+ .regbase = AT91SAM9263_BASE_PIOE,
}
};
-static void at91sam9263_poweroff(void)
-{
- at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
/* --------------------------------------------------------------------
* AT91SAM9263 processor initialization
* -------------------------------------------------------------------- */
@@ -303,10 +298,17 @@ static void __init at91sam9263_map_io(void)
at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE);
}
+static void __init at91sam9263_ioremap_registers(void)
+{
+ at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
+ at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
+ at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
+ at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
+}
+
static void __init at91sam9263_initialize(void)
{
- at91_arch_reset = at91sam9_alt_reset;
- pm_power_off = at91sam9263_poweroff;
+ arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
/* Register GPIO subsystem */
@@ -358,6 +360,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9263_soc = {
.map_io = at91sam9263_map_io,
.default_irq_priority = at91sam9263_default_irq_priority,
+ .ioremap_registers = at91sam9263_ioremap_registers,
.register_clocks = at91sam9263_register_clocks,
.init = at91sam9263_initialize,
};
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index d5fbac9ff4f..7b46b278702 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -70,7 +70,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
- if (data->vbus_pin[i])
+ if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i], 0);
}
@@ -123,7 +123,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
if (!data)
return;
- if (data->vbus_pin) {
+ if (gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
}
@@ -144,7 +144,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@@ -171,12 +171,12 @@ static struct platform_device at91sam9263_eth_device = {
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
- if (data->phy_irq_pin) {
+ if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
@@ -208,7 +208,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
platform_device_register(&at91sam9263_eth_device);
}
#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
@@ -276,13 +276,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
- if (data->det_pin) {
+ if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
- if (data->wp_pin)
+ if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
- if (data->vcc_pin)
+ if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
if (mmc_id == 0) { /* MCI0 */
@@ -430,17 +430,17 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
}
at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
- if (data->det_pin) {
+ if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
- if (data->irq_pin) {
+ if (gpio_is_valid(data->irq_pin)) {
at91_set_gpio_input(data->irq_pin, 1);
at91_set_deglitch(data->irq_pin, 1);
}
- if (data->vcc_pin)
+ if (gpio_is_valid(data->vcc_pin))
/* initially off */
at91_set_gpio_output(data->vcc_pin, 0);
@@ -473,8 +473,8 @@ static struct resource nand_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_BASE_SYS + AT91_ECC0,
- .end = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
+ .start = AT91SAM9263_BASE_ECC0,
+ .end = AT91SAM9263_BASE_ECC0 + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -500,15 +500,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
/* enable pin */
- if (data->enable_pin)
+ if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
- if (data->rdy_pin)
+ if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
- if (data->det_pin)
+ if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
nand_data = *data;
@@ -749,7 +749,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
at91_set_A_periph(AT91_PIN_PB3, 0); /* AC97RX */
/* reset */
- if (data->reset_pin)
+ if (gpio_is_valid(data->reset_pin))
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
@@ -956,8 +956,8 @@ static void __init at91_add_device_tc(void) { }
static struct resource rtt0_resources[] = {
{
- .start = AT91_BASE_SYS + AT91_RTT0,
- .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
+ .start = AT91SAM9263_BASE_RTT0,
+ .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -971,8 +971,8 @@ static struct platform_device at91sam9263_rtt0_device = {
static struct resource rtt1_resources[] = {
{
- .start = AT91_BASE_SYS + AT91_RTT1,
- .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
+ .start = AT91SAM9263_BASE_RTT1,
+ .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -996,10 +996,19 @@ static void __init at91_add_device_rtt(void)
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+ {
+ .start = AT91SAM9263_BASE_WDT,
+ .end = AT91SAM9263_BASE_WDT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
static struct platform_device at91sam9263_wdt_device = {
.name = "at91_wdt",
.id = -1,
- .num_resources = 0,
+ .resource = wdt_resources,
+ .num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@@ -1196,8 +1205,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_BASE_SYS + AT91_DBGU,
- .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91SAM9263_BASE_DBGU,
+ .end = AT91SAM9263_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 4ba85499fa9..d89ead740a9 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -25,7 +25,17 @@
static u32 pit_cycle; /* write-once */
static u32 pit_cnt; /* access only w/system irq blocked */
+static void __iomem *pit_base_addr __read_mostly;
+static inline unsigned int pit_read(unsigned int reg_offset)
+{
+ return __raw_readl(pit_base_addr + reg_offset);
+}
+
+static inline void pit_write(unsigned int reg_offset, unsigned long value)
+{
+ __raw_writel(value, pit_base_addr + reg_offset);
+}
/*
* Clocksource: just a monotonic counter of MCK/16 cycles.
@@ -39,7 +49,7 @@ static cycle_t read_pit_clk(struct clocksource *cs)
raw_local_irq_save(flags);
elapsed = pit_cnt;
- t = at91_sys_read(AT91_PIT_PIIR);
+ t = pit_read(AT91_PIT_PIIR);
raw_local_irq_restore(flags);
elapsed += PIT_PICNT(t) * pit_cycle;
@@ -64,8 +74,8 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
/* update clocksource counter */
- pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
- at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
+ pit_cnt += pit_cycle * PIT_PICNT(pit_read(AT91_PIT_PIVR));
+ pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
| AT91_PIT_PITIEN);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -74,7 +84,7 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
/* disable irq, leaving the clocksource active */
- at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+ pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
break;
case CLOCK_EVT_MODE_RESUME:
break;
@@ -103,11 +113,11 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
/* The PIT interrupt may be disabled, and is shared */
if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
- && (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
+ && (pit_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
unsigned nr_ticks;
/* Get number of ticks performed before irq, and ack it */
- nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
+ nr_ticks = PIT_PICNT(pit_read(AT91_PIT_PIVR));
do {
pit_cnt += pit_cycle;
pit_clkevt.event_handler(&pit_clkevt);
@@ -129,14 +139,14 @@ static struct irqaction at91sam926x_pit_irq = {
static void at91sam926x_pit_reset(void)
{
/* Disable timer and irqs */
- at91_sys_write(AT91_PIT_MR, 0);
+ pit_write(AT91_PIT_MR, 0);
/* Clear any pending interrupts, wait for PIT to stop counting */
- while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0)
+ while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
cpu_relax();
/* Start PIT but don't enable IRQ */
- at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+ pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
}
/*
@@ -178,7 +188,15 @@ static void __init at91sam926x_pit_init(void)
static void at91sam926x_pit_suspend(void)
{
/* Disable timer */
- at91_sys_write(AT91_PIT_MR, 0);
+ pit_write(AT91_PIT_MR, 0);
+}
+
+void __init at91sam926x_ioremap_pit(u32 addr)
+{
+ pit_base_addr = ioremap(addr, 16);
+
+ if (!pit_base_addr)
+ panic("Impossible to ioremap PIT\n");
}
struct sys_timer at91sam926x_timer = {
diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S
index e0256deb91f..d3f931c5942 100644
--- a/arch/arm/mach-at91/at91sam9_alt_reset.S
+++ b/arch/arm/mach-at91/at91sam9_alt_reset.S
@@ -14,20 +14,15 @@
*/
#include <linux/linkage.h>
-#include <asm/system.h>
#include <mach/hardware.h>
#include <mach/at91sam9_sdramc.h>
#include <mach/at91_rstc.h>
.arm
- .globl at91sam9_alt_reset
+ .globl at91sam9_alt_restart
-at91sam9_alt_reset: mrc p15, 0, r0, c1, c0, 0
- orr r0, r0, #CR_I
- mcr p15, 0, r0, c1, c0, 0 @ enable I-cache
-
- ldr r0, .at91_va_base_sdramc @ preload constants
+at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants
ldr r1, .at91_va_base_rstc_cr
mov r2, #1
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 318b0407ea0..7032dd32cdf 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -11,7 +11,6 @@
*/
#include <linux/module.h>
-#include <linux/pm.h>
#include <linux/dma-mapping.h>
#include <asm/irq.h>
@@ -20,12 +19,12 @@
#include <mach/at91sam9g45.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
#include <mach/cpu.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
+#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@@ -150,7 +149,7 @@ static struct clk ac97_clk = {
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
- .name = "macb_clk",
+ .name = "pclk",
.pmc_mask = 1 << AT91SAM9G45_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -209,6 +208,8 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
+ /* One additional fake clock for macb_hclk */
+ CLKDEV_CON_ID("hclk", &macb_clk),
/* One additional fake clock for ohci */
CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
@@ -231,6 +232,11 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
+ CLKDEV_CON_ID("pioA", &pioA_clk),
+ CLKDEV_CON_ID("pioB", &pioB_clk),
+ CLKDEV_CON_ID("pioC", &pioC_clk),
+ CLKDEV_CON_ID("pioD", &pioDE_clk),
+ CLKDEV_CON_ID("pioE", &pioDE_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -293,41 +299,30 @@ void __init at91sam9g45_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
-static struct at91_gpio_bank at91sam9g45_gpio[] = {
+static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
{
.id = AT91SAM9G45_ID_PIOA,
- .offset = AT91_PIOA,
- .clock = &pioA_clk,
+ .regbase = AT91SAM9G45_BASE_PIOA,
}, {
.id = AT91SAM9G45_ID_PIOB,
- .offset = AT91_PIOB,
- .clock = &pioB_clk,
+ .regbase = AT91SAM9G45_BASE_PIOB,
}, {
.id = AT91SAM9G45_ID_PIOC,
- .offset = AT91_PIOC,
- .clock = &pioC_clk,
+ .regbase = AT91SAM9G45_BASE_PIOC,
}, {
.id = AT91SAM9G45_ID_PIODE,
- .offset = AT91_PIOD,
- .clock = &pioDE_clk,
+ .regbase = AT91SAM9G45_BASE_PIOD,
}, {
.id = AT91SAM9G45_ID_PIODE,
- .offset = AT91_PIOE,
- .clock = &pioDE_clk,
+ .regbase = AT91SAM9G45_BASE_PIOE,
}
};
-static void at91sam9g45_reset(void)
+static void at91sam9g45_restart(char mode, const char *cmd)
{
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
-static void at91sam9g45_poweroff(void)
-{
- at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
/* --------------------------------------------------------------------
* AT91SAM9G45 processor initialization
* -------------------------------------------------------------------- */
@@ -338,10 +333,16 @@ static void __init at91sam9g45_map_io(void)
init_consistent_dma_size(SZ_4M);
}
+static void __init at91sam9g45_ioremap_registers(void)
+{
+ at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
+ at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
+ at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
+}
+
static void __init at91sam9g45_initialize(void)
{
- at91_arch_reset = at91sam9g45_reset;
- pm_power_off = at91sam9g45_poweroff;
+ arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
/* Register GPIO subsystem */
@@ -393,6 +394,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9g45_soc = {
.map_io = at91sam9g45_map_io,
.default_irq_priority = at91sam9g45_default_irq_priority,
+ .ioremap_registers = at91sam9g45_ioremap_registers,
.register_clocks = at91sam9g45_register_clocks,
.init = at91sam9g45_initialize,
};
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 09a16d6bd5c..b7582dd10dc 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -44,8 +44,8 @@ static struct at_dma_platform_data atdma_pdata = {
static struct resource hdmac_resources[] = {
[0] = {
- .start = AT91_BASE_SYS + AT91_DMA,
- .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+ .start = AT91SAM9G45_BASE_DMA,
+ .end = AT91SAM9G45_BASE_DMA + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -120,7 +120,7 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
- if (data->vbus_pin[i])
+ if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i], 0);
}
@@ -181,7 +181,7 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
- if (data->vbus_pin[i])
+ if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i], 0);
}
@@ -263,7 +263,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
- if (data && data->vbus_pin > 0) {
+ if (data && gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@@ -284,7 +284,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@@ -311,12 +311,12 @@ static struct platform_device at91sam9g45_eth_device = {
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
- if (data->phy_irq_pin) {
+ if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
@@ -348,7 +348,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
platform_device_register(&at91sam9g45_eth_device);
}
#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
@@ -449,11 +449,11 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
/* input/irq */
- if (data->slot[0].detect_pin) {
+ if (gpio_is_valid(data->slot[0].detect_pin)) {
at91_set_gpio_input(data->slot[0].detect_pin, 1);
at91_set_deglitch(data->slot[0].detect_pin, 1);
}
- if (data->slot[0].wp_pin)
+ if (gpio_is_valid(data->slot[0].wp_pin))
at91_set_gpio_input(data->slot[0].wp_pin, 1);
if (mmc_id == 0) { /* MCI0 */
@@ -529,8 +529,8 @@ static struct resource nand_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_BASE_SYS + AT91_ECC,
- .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+ .start = AT91SAM9G45_BASE_ECC,
+ .end = AT91SAM9G45_BASE_ECC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -556,15 +556,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
/* enable pin */
- if (data->enable_pin)
+ if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
- if (data->rdy_pin)
+ if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
- if (data->det_pin)
+ if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
nand_data = *data;
@@ -859,7 +859,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */
/* reset */
- if (data->reset_pin)
+ if (gpio_is_valid(data->reset_pin))
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
@@ -1009,10 +1009,24 @@ static void __init at91_add_device_tc(void) { }
* -------------------------------------------------------------------- */
#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_RTC,
+ .end = AT91SAM9G45_BASE_RTC + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct platform_device at91sam9g45_rtc_device = {
.name = "at91_rtc",
.id = -1,
- .num_resources = 0,
+ .resource = rtc_resources,
+ .num_resources = ARRAY_SIZE(rtc_resources),
};
static void __init at91_add_device_rtc(void)
@@ -1081,8 +1095,8 @@ void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
static struct resource rtt_resources[] = {
{
- .start = AT91_BASE_SYS + AT91_RTT,
- .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .start = AT91SAM9G45_BASE_RTT,
+ .end = AT91SAM9G45_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -1133,10 +1147,19 @@ static void __init at91_add_device_trng(void) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+ {
+ .start = AT91SAM9G45_BASE_WDT,
+ .end = AT91SAM9G45_BASE_WDT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
static struct platform_device at91sam9g45_wdt_device = {
.name = "at91_wdt",
.id = -1,
- .num_resources = 0,
+ .resource = wdt_resources,
+ .num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@@ -1332,8 +1355,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_BASE_SYS + AT91_DBGU,
- .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91SAM9G45_BASE_DBGU,
+ .end = AT91SAM9G45_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index a238105d2c1..d6bcb1da11d 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -10,7 +10,6 @@
*/
#include <linux/module.h>
-#include <linux/pm.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -20,11 +19,11 @@
#include <mach/at91sam9rl.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
+#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
@@ -184,6 +183,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ CLKDEV_CON_ID("pioA", &pioA_clk),
+ CLKDEV_CON_ID("pioB", &pioB_clk),
+ CLKDEV_CON_ID("pioC", &pioC_clk),
+ CLKDEV_CON_ID("pioD", &pioD_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -243,32 +246,22 @@ void __init at91sam9rl_set_console_clock(int id)
* GPIO
* -------------------------------------------------------------------- */
-static struct at91_gpio_bank at91sam9rl_gpio[] = {
+static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = {
{
.id = AT91SAM9RL_ID_PIOA,
- .offset = AT91_PIOA,
- .clock = &pioA_clk,
+ .regbase = AT91SAM9RL_BASE_PIOA,
}, {
.id = AT91SAM9RL_ID_PIOB,
- .offset = AT91_PIOB,
- .clock = &pioB_clk,
+ .regbase = AT91SAM9RL_BASE_PIOB,
}, {
.id = AT91SAM9RL_ID_PIOC,
- .offset = AT91_PIOC,
- .clock = &pioC_clk,
+ .regbase = AT91SAM9RL_BASE_PIOC,
}, {
.id = AT91SAM9RL_ID_PIOD,
- .offset = AT91_PIOD,
- .clock = &pioD_clk,
+ .regbase = AT91SAM9RL_BASE_PIOD,
}
};
-static void at91sam9rl_poweroff(void)
-{
- at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
/* --------------------------------------------------------------------
* AT91SAM9RL processor initialization
* -------------------------------------------------------------------- */
@@ -290,10 +283,16 @@ static void __init at91sam9rl_map_io(void)
at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size);
}
+static void __init at91sam9rl_ioremap_registers(void)
+{
+ at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
+ at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
+ at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
+}
+
static void __init at91sam9rl_initialize(void)
{
- at91_arch_reset = at91sam9_alt_reset;
- pm_power_off = at91sam9rl_poweroff;
+ arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
/* Register GPIO subsystem */
@@ -345,6 +344,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
struct at91_init_soc __initdata at91sam9rl_soc = {
.map_io = at91sam9rl_map_io,
.default_irq_priority = at91sam9rl_default_irq_priority,
+ .ioremap_registers = at91sam9rl_ioremap_registers,
.register_clocks = at91sam9rl_register_clocks,
.init = at91sam9rl_initialize,
};
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 628eb566d60..61908dce978 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -39,8 +39,8 @@ static struct at_dma_platform_data atdma_pdata = {
static struct resource hdmac_resources[] = {
[0] = {
- .start = AT91_BASE_SYS + AT91_DMA,
- .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+ .start = AT91SAM9RL_BASE_DMA,
+ .end = AT91SAM9RL_BASE_DMA + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
@@ -147,7 +147,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
- if (data && data->vbus_pin > 0) {
+ if (data && gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@@ -201,13 +201,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
return;
/* input/irq */
- if (data->det_pin) {
+ if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
- if (data->wp_pin)
+ if (gpio_is_valid(data->wp_pin))
at91_set_gpio_input(data->wp_pin, 1);
- if (data->vcc_pin)
+ if (gpio_is_valid(data->vcc_pin))
at91_set_gpio_output(data->vcc_pin, 0);
/* CLK */
@@ -248,8 +248,8 @@ static struct resource nand_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91_BASE_SYS + AT91_ECC,
- .end = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+ .start = AT91SAM9RL_BASE_ECC,
+ .end = AT91SAM9RL_BASE_ECC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -275,15 +275,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
- if (data->enable_pin)
+ if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
- if (data->rdy_pin)
+ if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
- if (data->det_pin)
+ if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */
@@ -483,7 +483,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
at91_set_A_periph(AT91_PIN_PD4, 0); /* AC97RX */
/* reset */
- if (data->reset_pin)
+ if (gpio_is_valid(data->reset_pin))
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
@@ -685,8 +685,8 @@ static void __init at91_add_device_rtc(void) {}
static struct resource rtt_resources[] = {
{
- .start = AT91_BASE_SYS + AT91_RTT,
- .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .start = AT91SAM9RL_BASE_RTT,
+ .end = AT91SAM9RL_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -709,10 +709,19 @@ static void __init at91_add_device_rtt(void)
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+ {
+ .start = AT91SAM9RL_BASE_WDT,
+ .end = AT91SAM9RL_BASE_WDT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
static struct platform_device at91sam9rl_wdt_device = {
.name = "at91_wdt",
.id = -1,
- .num_resources = 0,
+ .resource = wdt_resources,
+ .num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
@@ -908,8 +917,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
- .start = AT91_BASE_SYS + AT91_DBGU,
- .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .start = AT91SAM9RL_BASE_DBGU,
+ .end = AT91SAM9RL_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 367d5cd5e36..2628384aaae 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -63,13 +63,15 @@ static void __init onearm_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata onearm_eth_data = {
+static struct macb_platform_data __initdata onearm_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata onearm_usbh_data = {
.ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata onearm_udc_data = {
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 4282d96dffa..3bb40694b02 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -75,6 +75,8 @@ static void __init afeb9260_init_early(void)
*/
static struct at91_usbh_data __initdata afeb9260_usbh_data = {
.ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata afeb9260_usbh_data = {
*/
static struct at91_udc_data __initdata afeb9260_udc_data = {
.vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@@ -103,7 +105,7 @@ static struct spi_board_info afeb9260_spi_devices[] = {
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata afeb9260_macb_data = {
+static struct macb_platform_data __initdata afeb9260_macb_data = {
.phy_irq_pin = AT91_PIN_PA9,
.is_rmii = 0,
};
@@ -138,6 +140,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
.bus_width_16 = 0,
.parts = afeb9260_nand_partition,
.num_parts = ARRAY_SIZE(afeb9260_nand_partition),
+ .det_pin = -EINVAL,
};
@@ -149,6 +152,7 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
.wp_pin = AT91_PIN_PC4,
.slot_b = 1,
.wire4 = 1,
+ .vcc_pin = -EINVAL,
};
@@ -169,6 +173,8 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
static struct at91_cf_data afeb9260_cf_data = {
.chipselect = 4,
.irq_pin = AT91_PIN_PA6,
+ .det_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
.rst_pin = AT91_PIN_PA7,
.flags = AT91_CF_TRUE_IDE,
};
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index f90cfb32bad..8510e9e5498 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -62,6 +62,8 @@ static void __init cam60_init_early(void)
*/
static struct at91_usbh_data __initdata cam60_usbh_data = {
.ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
@@ -115,7 +117,7 @@ static struct spi_board_info cam60_spi_devices[] __initdata = {
/*
* MACB Ethernet device
*/
-static struct __initdata at91_eth_data cam60_macb_data = {
+static struct __initdata macb_platform_data cam60_macb_data = {
.phy_irq_pin = AT91_PIN_PB5,
.is_rmii = 0,
};
@@ -135,7 +137,7 @@ static struct mtd_partition __initdata cam60_nand_partition[] = {
static struct atmel_nand_data __initdata cam60_nand_data = {
.ale = 21,
.cle = 22,
- // .det_pin = ... not there
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA9,
.enable_pin = AT91_PIN_PA7,
.parts = cam60_nand_partition,
@@ -163,7 +165,7 @@ static struct sam9_smc_config __initdata cam60_nand_smc_config = {
static void __init cam60_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &cam60_nand_smc_config);
+ sam9_smc_configure(0, 3, &cam60_nand_smc_config);
at91_add_device_nand(&cam60_nand_data);
}
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 5dffd3be62d..ac3de4f7c31 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -70,6 +70,8 @@ static void __init cap9adk_init_early(void)
*/
static struct at91_usbh_data __initdata cap9adk_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -144,16 +146,17 @@ static struct spi_board_info cap9adk_spi_devices[] = {
*/
static struct at91_mmc_data __initdata cap9adk_mmc_data = {
.wire4 = 1,
-// .det_pin = ... not connected
-// .wp_pin = ... not connected
-// .vcc_pin = ... not connected
+ .det_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata cap9adk_macb_data = {
+static struct macb_platform_data __initdata cap9adk_macb_data = {
+ .phy_irq_pin = -EINVAL,
.is_rmii = 1,
};
@@ -172,8 +175,8 @@ static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
static struct atmel_nand_data __initdata cap9adk_nand_data = {
.ale = 21,
.cle = 22,
-// .det_pin = ... not connected
-// .rdy_pin = ... not connected
+ .det_pin = -EINVAL,
+ .rdy_pin = -EINVAL,
.enable_pin = AT91_PIN_PD15,
.parts = cap9adk_nand_partitions,
.num_parts = ARRAY_SIZE(cap9adk_nand_partitions),
@@ -212,7 +215,7 @@ static void __init cap9adk_add_device_nand(void)
cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &cap9adk_nand_smc_config);
+ sam9_smc_configure(0, 3, &cap9adk_nand_smc_config);
at91_add_device_nand(&cap9adk_nand_data);
}
@@ -282,7 +285,7 @@ static __init void cap9adk_add_device_nor(void)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
/* configure chip-select 0 (NOR) */
- sam9_smc_configure(0, &cap9adk_nor_smc_config);
+ sam9_smc_configure(0, 0, &cap9adk_nor_smc_config);
platform_device_register(&cap9adk_nor_flash);
}
@@ -351,7 +354,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
* AC97
*/
static struct ac97c_platform_data cap9adk_ac97_data = {
-// .reset_pin = ... not connected
+ .reset_pin = -EINVAL,
};
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 774c87fcbd5..59d9cf99753 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -57,13 +57,15 @@ static void __init carmeva_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata carmeva_eth_data = {
+static struct macb_platform_data __initdata carmeva_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata carmeva_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata carmeva_udc_data = {
@@ -75,8 +77,8 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
// static struct at91_cf_data __initdata carmeva_cf_data = {
// .det_pin = AT91_PIN_PB0,
// .rst_pin = AT91_PIN_PC5,
- // .irq_pin = ... not connected
- // .vcc_pin = ... always powered
+ // .irq_pin = -EINVAL,
+ // .vcc_pin = -EINVAL,
// };
static struct at91_mmc_data __initdata carmeva_mmc_data = {
@@ -84,6 +86,7 @@ static struct at91_mmc_data __initdata carmeva_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PB10,
.wp_pin = AT91_PIN_PC14,
+ .vcc_pin = -EINVAL,
};
static struct spi_board_info carmeva_spi_devices[] = {
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index fc885a4ce24..9ab3d1ea326 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -86,6 +86,8 @@ static void __init cpu9krea_init_early(void)
*/
static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -93,13 +95,14 @@ static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
*/
static struct at91_udc_data __initdata cpu9krea_udc_data = {
.vbus_pin = AT91_PIN_PC8,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata cpu9krea_macb_data = {
+static struct macb_platform_data __initdata cpu9krea_macb_data = {
+ .phy_irq_pin = -EINVAL,
.is_rmii = 1,
};
@@ -112,6 +115,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = {
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.bus_width_16 = 0,
+ .det_pin = -EINVAL,
};
#ifdef CONFIG_MACH_CPU9260
@@ -156,7 +160,7 @@ static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
static void __init cpu9krea_add_device_nand(void)
{
- sam9_smc_configure(3, &cpu9krea_nand_smc_config);
+ sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config);
at91_add_device_nand(&cpu9krea_nand_data);
}
@@ -238,7 +242,7 @@ static __init void cpu9krea_add_device_nor(void)
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
/* configure chip-select 0 (NOR) */
- sam9_smc_configure(0, &cpu9krea_nor_smc_config);
+ sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config);
platform_device_register(&cpu9krea_nor_flash);
}
@@ -337,6 +341,8 @@ static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = AT91_PIN_PA29,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
static void __init cpu9krea_board_init(void)
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index d35e65b08cc..368e1427ad9 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -82,12 +82,15 @@ static void __init cpuat91_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata cpuat91_eth_data = {
+static struct macb_platform_data __initdata cpuat91_eth_data = {
+ .phy_irq_pin = -EINVAL,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata cpuat91_usbh_data = {
.ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata cpuat91_udc_data = {
@@ -98,6 +101,8 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
static struct at91_mmc_data __initdata cpuat91_mmc_data = {
.det_pin = AT91_PIN_PC2,
.wire4 = 1,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
static struct physmap_flash_data cpuat91_flash_data = {
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index c3936665e64..1a1547b1ce4 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -58,18 +58,20 @@ static void __init csb337_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata csb337_eth_data = {
+static struct macb_platform_data __initdata csb337_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata csb337_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata csb337_udc_data = {
- // this has no VBUS sensing pin
.pullup_pin = AT91_PIN_PA24,
+ .vbus_pin = -EINVAL,
};
static struct i2c_board_info __initdata csb337_i2c_devices[] = {
@@ -98,6 +100,7 @@ static struct at91_mmc_data __initdata csb337_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PD6,
+ .vcc_pin = -EINVAL,
};
static struct spi_board_info csb337_spi_devices[] = {
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 586100e2acb..f650bf39455 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -52,13 +52,15 @@ static void __init csb637_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata csb637_eth_data = {
+static struct macb_platform_data __initdata csb637_eth_data = {
.phy_irq_pin = AT91_PIN_PC0,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata csb637_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata csb637_udc_data = {
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 0b7d3277821..bb6b434ec0c 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -50,6 +50,7 @@ static void __init ek_init_early(void)
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
};
@@ -82,7 +83,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
+ sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 45db7a3dbef..d302ca3eeb6 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -60,13 +60,15 @@ static void __init eb9200_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata eb9200_eth_data = {
+static struct macb_platform_data __initdata eb9200_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata eb9200_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata eb9200_udc_data = {
@@ -75,15 +77,18 @@ static struct at91_udc_data __initdata eb9200_udc_data = {
};
static struct at91_cf_data __initdata eb9200_cf_data = {
+ .irq_pin = -EINVAL,
.det_pin = AT91_PIN_PB0,
+ .vcc_pin = -EINVAL,
.rst_pin = AT91_PIN_PC5,
- // .irq_pin = ... not connected
- // .vcc_pin = ... always powered
};
static struct at91_mmc_data __initdata eb9200_mmc_data = {
.slot_b = 0,
.wire4 = 1,
+ .det_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 2f9c16d2921..69966ce4d77 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -64,18 +64,23 @@ static void __init ecb_at91init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata ecb_at91eth_data = {
+static struct macb_platform_data __initdata ecb_at91eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata ecb_at91usbh_data = {
.ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_mmc_data __initdata ecb_at91mmc_data = {
.slot_b = 0,
.wire4 = 1,
+ .det_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 8252c722607..07ef35b0ec2 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -47,13 +47,15 @@ static void __init eco920_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata eco920_eth_data = {
+static struct macb_platform_data __initdata eco920_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata eco920_usbh_data = {
.ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata eco920_udc_data = {
@@ -64,6 +66,9 @@ static struct at91_udc_data __initdata eco920_udc_data = {
static struct at91_mmc_data __initdata eco920_mmc_data = {
.slot_b = 0,
.wire4 = 0,
+ .det_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
static struct physmap_flash_data eco920_flash_data = {
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 4c3f65d9c59..eec02cd57ce 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -52,12 +52,14 @@ static void __init flexibity_init_early(void)
/* USB Host port */
static struct at91_usbh_data __initdata flexibity_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/* USB Device port */
static struct at91_udc_data __initdata flexibity_udc_data = {
.vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
/* SPI devices */
@@ -76,6 +78,7 @@ static struct at91_mmc_data __initdata flexibity_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PC9,
.wp_pin = AT91_PIN_PC4,
+ .vcc_pin = -EINVAL,
};
/* LEDs */
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index f27d1a780cf..caf017f0f4e 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -106,6 +106,8 @@ static void __init foxg20_init_early(void)
*/
static struct at91_usbh_data __initdata foxg20_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -113,7 +115,7 @@ static struct at91_usbh_data __initdata foxg20_usbh_data = {
*/
static struct at91_udc_data __initdata foxg20_udc_data = {
.vbus_pin = AT91_PIN_PC6,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@@ -135,7 +137,7 @@ static struct spi_board_info foxg20_spi_devices[] = {
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata foxg20_macb_data = {
+static struct macb_platform_data __initdata foxg20_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
@@ -147,6 +149,9 @@ static struct at91_eth_data __initdata foxg20_macb_data = {
static struct at91_mmc_data __initdata foxg20_mmc_data = {
.slot_b = 1,
.wire4 = 1,
+ .det_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 2e95949737e..230e71969fb 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -80,6 +80,8 @@ static void __init gsia18s_init_early(void)
*/
static struct at91_usbh_data __initdata usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -87,13 +89,13 @@ static struct at91_usbh_data __initdata usbh_data = {
*/
static struct at91_udc_data __initdata udc_data = {
.vbus_pin = AT91_PIN_PA22,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
.phy_irq_pin = AT91_PIN_PA28,
.is_rmii = 1,
};
@@ -530,6 +532,7 @@ static struct i2c_board_info __initdata gsia18s_i2c_devices[] = {
static struct at91_cf_data __initdata gsia18s_cf1_data = {
.irq_pin = AT91_PIN_PA27,
.det_pin = AT91_PIN_PB30,
+ .vcc_pin = -EINVAL,
.rst_pin = AT91_PIN_PB31,
.chipselect = 5,
.flags = AT91_CF_TRUE_IDE,
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 3bae73e6363..efde1b2327c 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -61,13 +61,15 @@ static void __init kafa_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata kafa_eth_data = {
+static struct macb_platform_data __initdata kafa_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata kafa_usbh_data = {
.ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata kafa_udc_data = {
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index e61351ffad5..d75a4a2ad9c 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -69,13 +69,15 @@ static void __init kb9202_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata kb9202_eth_data = {
+static struct macb_platform_data __initdata kb9202_eth_data = {
.phy_irq_pin = AT91_PIN_PB29,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata kb9202_usbh_data = {
.ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata kb9202_udc_data = {
@@ -87,6 +89,8 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = {
.det_pin = AT91_PIN_PB2,
.slot_b = 0,
.wire4 = 1,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
static struct mtd_partition __initdata kb9202_nand_partition[] = {
@@ -100,7 +104,7 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = {
static struct atmel_nand_data __initdata kb9202_nand_data = {
.ale = 22,
.cle = 21,
- // .det_pin = ... not there
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC29,
.enable_pin = AT91_PIN_PC28,
.parts = kb9202_nand_partition,
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index ef816c17dc6..3f8617c0e04 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -72,6 +72,7 @@ static void __init neocore926_init_early(void)
static struct at91_usbh_data __initdata neocore926_usbh_data = {
.ports = 2,
.vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -79,7 +80,7 @@ static struct at91_usbh_data __initdata neocore926_usbh_data = {
*/
static struct at91_udc_data __initdata neocore926_udc_data = {
.vbus_pin = AT91_PIN_PA25,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@@ -149,13 +150,14 @@ static struct at91_mmc_data __initdata neocore926_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PE18,
.wp_pin = AT91_PIN_PE19,
+ .vcc_pin = -EINVAL,
};
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata neocore926_macb_data = {
+static struct macb_platform_data __initdata neocore926_macb_data = {
.phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
@@ -190,6 +192,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = {
.enable_pin = AT91_PIN_PD15,
.parts = neocore926_nand_partition,
.num_parts = ARRAY_SIZE(neocore926_nand_partition),
+ .det_pin = -EINVAL,
};
static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
@@ -213,7 +216,7 @@ static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
static void __init neocore926_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &neocore926_nand_smc_config);
+ sam9_smc_configure(0, 3, &neocore926_nand_smc_config);
at91_add_device_nand(&neocore926_nand_data);
}
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 49e3f699b48..b4a12fc184c 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -96,9 +96,9 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
static void __init add_device_pcontrol(void)
{
/* configure chip-select 4 (IO compatible to 8051 X4 ) */
- sam9_smc_configure(4, &pcontrol_smc_config[0]);
+ sam9_smc_configure(0, 4, &pcontrol_smc_config[0]);
/* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A D4 ) */
- sam9_smc_configure(7, &pcontrol_smc_config[1]);
+ sam9_smc_configure(0, 7, &pcontrol_smc_config[1]);
}
@@ -107,6 +107,8 @@ static void __init add_device_pcontrol(void)
*/
static struct at91_usbh_data __initdata usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
@@ -122,7 +124,7 @@ static struct at91_udc_data __initdata pcontrol_g20_udc_data = {
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
.phy_irq_pin = AT91_PIN_PA28,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 0a8fe6a1b7c..ab024fa11d5 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -60,13 +60,15 @@ static void __init picotux200_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata picotux200_eth_data = {
+static struct macb_platform_data __initdata picotux200_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata picotux200_usbh_data = {
.ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_mmc_data __initdata picotux200_mmc_data = {
@@ -74,6 +76,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PA17,
+ .vcc_pin = -EINVAL,
};
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 07421bdb88e..e029d220cb8 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -77,6 +77,8 @@ static void __init ek_init_early(void)
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -84,7 +86,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
/*
@@ -104,7 +106,7 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA31,
.is_rmii = 1,
};
@@ -133,7 +135,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
-// .det_pin = ... not connected
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.parts = ek_nand_partition,
@@ -161,7 +163,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
static void __init ek_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
+ sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@@ -172,9 +174,9 @@ static void __init ek_add_device_nand(void)
static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 0,
.wire4 = 1,
-// .det_pin = ... not connected
-// .wp_pin = ... not connected
-// .vcc_pin = ... not connected
+ .det_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
/*
@@ -251,7 +253,7 @@ static void __init ek_board_init(void)
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* shutdown controller, wakeup button (5 msec low) */
- at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+ at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
}
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 80a8c9c6e92..782f37946af 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -65,13 +65,15 @@ static void __init dk_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata dk_eth_data = {
+static struct macb_platform_data __initdata dk_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata dk_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata dk_udc_data = {
@@ -80,16 +82,19 @@ static struct at91_udc_data __initdata dk_udc_data = {
};
static struct at91_cf_data __initdata dk_cf_data = {
+ .irq_pin = -EINVAL,
.det_pin = AT91_PIN_PB0,
+ .vcc_pin = -EINVAL,
.rst_pin = AT91_PIN_PC5,
- // .irq_pin = ... not connected
- // .vcc_pin = ... always powered
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata dk_mmc_data = {
.slot_b = 0,
.wire4 = 1,
+ .det_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
#endif
@@ -143,7 +148,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
.cle = 21,
.det_pin = AT91_PIN_PB1,
.rdy_pin = AT91_PIN_PC2,
- // .enable_pin = ... not there
+ .enable_pin = -EINVAL,
.parts = dk_nand_partition,
.num_parts = ARRAY_SIZE(dk_nand_partition),
};
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 99fd7f8aee0..ef7c12a9224 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -65,13 +65,15 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata ek_eth_data = {
+static struct macb_platform_data __initdata ek_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata ek_udc_data = {
@@ -85,6 +87,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PA17,
+ .vcc_pin = -EINVAL,
};
#endif
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index e927df0175d..af0750fafa2 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -60,7 +60,7 @@ static void __init rsi_ews_init_early(void)
/*
* Ethernet
*/
-static struct at91_eth_data rsi_ews_eth_data __initdata = {
+static struct macb_platform_data rsi_ews_eth_data __initdata = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
@@ -70,6 +70,8 @@ static struct at91_eth_data rsi_ews_eth_data __initdata = {
*/
static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
.ports = 1,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 072d53af98d..84bce587735 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -72,6 +72,8 @@ static void __init ek_init_early(void)
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -79,7 +81,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@@ -109,7 +111,7 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 0,
};
@@ -134,7 +136,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
-// .det_pin = ... not connected
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.parts = ek_nand_partition,
@@ -162,7 +164,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
static void __init ek_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
+ sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@@ -176,7 +178,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PC8,
.wp_pin = AT91_PIN_PC4,
-// .vcc_pin = ... not connected
+ .vcc_pin = -EINVAL,
};
static void __init ek_board_init(void)
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 4f10181a078..be8233bcabd 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -75,6 +75,8 @@ static void __init ek_init_early(void)
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@@ -151,7 +153,7 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
@@ -176,7 +178,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
-// .det_pin = ... not connected
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.parts = ek_nand_partition,
@@ -211,7 +213,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
+ sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@@ -223,9 +225,9 @@ static void __init ek_add_device_nand(void)
static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 1,
.wire4 = 1,
-// .det_pin = ... not connected
-// .wp_pin = ... not connected
-// .vcc_pin = ... not connected
+ .det_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index b005b738e8f..40895072a1a 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -131,7 +131,7 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
static void __init ek_add_device_dm9000(void)
{
/* Configure chip-select 2 (DM9000) */
- sam9_smc_configure(2, &dm9000_smc_config);
+ sam9_smc_configure(0, 2, &dm9000_smc_config);
/* Configure Reset signal as output */
at91_set_gpio_output(AT91_PIN_PC10, 0);
@@ -151,6 +151,8 @@ static void __init ek_add_device_dm9000(void) {}
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
@@ -159,7 +161,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PB29,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@@ -182,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 22,
.cle = 21,
-// .det_pin = ... not connected
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC15,
.enable_pin = AT91_PIN_PC14,
.parts = ek_nand_partition,
@@ -217,7 +219,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
+ sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@@ -345,6 +347,9 @@ static struct spi_board_info ek_spi_devices[] = {
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
+ .det_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
#endif /* CONFIG_SPI_ATMEL_* */
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index bccdcf23caa..29f66052fe6 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -74,6 +74,7 @@ static void __init ek_init_early(void)
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
.vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -81,7 +82,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PA25,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@@ -151,14 +152,14 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PE18,
.wp_pin = AT91_PIN_PE19,
-// .vcc_pin = ... not connected
+ .vcc_pin = -EINVAL,
};
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
@@ -183,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
-// .det_pin = ... not connected
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
.parts = ek_nand_partition,
@@ -218,7 +219,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
+ sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@@ -353,6 +354,7 @@ static void __init ek_add_device_buttons(void) {}
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
+ .reset_pin = -EINVAL,
};
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 64fc75c9d0a..843d6286c6f 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -86,6 +86,8 @@ static void __init ek_init_early(void)
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -93,7 +95,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@@ -123,7 +125,7 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
@@ -163,6 +165,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
+ .det_pin = -EINVAL,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
@@ -195,7 +198,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
+ sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@@ -210,6 +213,7 @@ static struct mci_platform_data __initdata ek_mmc_data = {
.slot[1] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PC9,
+ .wp_pin = -EINVAL,
},
};
@@ -218,6 +222,8 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 1, /* Only one slot so use slot B */
.wire4 = 1,
.det_pin = AT91_PIN_PC9,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
#endif
@@ -227,6 +233,7 @@ static void __init ek_add_device_mmc(void)
if (ek_have_2mmc()) {
ek_mmc_data.slot[0].bus_width = 4;
ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
+ ek_mmc_data.slot[0].wp_pin = -1;
}
at91_add_device_mci(0, &ek_mmc_data);
#else
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 92de9127923..ea0d1b9c2b7 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -69,6 +69,7 @@ static void __init ek_init_early(void)
static struct at91_usbh_data __initdata ek_usbh_hs_data = {
.ports = 2,
.vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
@@ -100,6 +101,7 @@ static struct mci_platform_data __initdata mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PD10,
+ .wp_pin = -EINVAL,
},
};
@@ -115,7 +117,7 @@ static struct mci_platform_data __initdata mci1_data = {
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PD5,
.is_rmii = 1,
};
@@ -143,6 +145,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.cle = 22,
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
+ .det_pin = -EINVAL,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
@@ -175,7 +178,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
+ sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@@ -330,6 +333,7 @@ static void __init ek_add_device_buttons(void) {}
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
+ .reset_pin = -EINVAL,
};
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b2b748239f3..c1366d0032b 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -67,8 +67,8 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
.det_pin = AT91_PIN_PA15,
-// .wp_pin = ... not connected
-// .vcc_pin = ... not connected
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
@@ -91,7 +91,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
-// .det_pin = ... not connected
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PD17,
.enable_pin = AT91_PIN_PB6,
.parts = ek_nand_partition,
@@ -119,7 +119,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
static void __init ek_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
+ sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@@ -204,6 +204,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
* reset_pin is not connected: NRST
*/
static struct ac97c_platform_data ek_ac97_data = {
+ .reset_pin = -EINVAL,
};
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 0df01c6e2d0..4770db08e5a 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -57,15 +57,19 @@ static void __init snapper9260_init_early(void)
static struct at91_usbh_data __initdata snapper9260_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
static struct at91_udc_data __initdata snapper9260_udc_data = {
.vbus_pin = SNAPPER9260_IO_EXP_GPIO(5),
.vbus_active_low = 1,
.vbus_polled = 1,
+ .pullup_pin = -EINVAL,
};
-static struct at91_eth_data snapper9260_macb_data = {
+static struct macb_platform_data snapper9260_macb_data = {
+ .phy_irq_pin = -EINVAL,
.is_rmii = 1,
};
@@ -104,6 +108,8 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = {
.parts = snapper9260_nand_partitions,
.num_parts = ARRAY_SIZE(snapper9260_nand_partitions),
.bus_width_16 = 0,
+ .enable_pin = -EINVAL,
+ .det_pin = -EINVAL,
};
static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
@@ -149,7 +155,7 @@ static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
static void __init snapper9260_add_device_nand(void)
{
at91_set_A_periph(AT91_PIN_PC14, 0);
- sam9_smc_configure(3, &snapper9260_nand_smc_config);
+ sam9_smc_configure(0, 3, &snapper9260_nand_smc_config);
at91_add_device_nand(&snapper9260_nand_data);
}
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 936e5fd7f40..72eb3b4d9ab 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -85,6 +85,7 @@ static struct atmel_nand_data __initdata nand_data = {
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.bus_width_16 = 0,
+ .det_pin = -EINVAL,
};
static struct sam9_smc_config __initdata nand_smc_config = {
@@ -108,7 +109,7 @@ static struct sam9_smc_config __initdata nand_smc_config = {
static void __init add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &nand_smc_config);
+ sam9_smc_configure(0, 3, &nand_smc_config);
at91_add_device_nand(&nand_data);
}
@@ -122,12 +123,17 @@ static void __init add_device_nand(void)
static struct mci_platform_data __initdata mmc_data = {
.slot[0] = {
.bus_width = 4,
+ .detect_pin = -1,
+ .wp_pin = -1,
},
};
#else
static struct at91_mmc_data __initdata mmc_data = {
.slot_b = 0,
.wire4 = 1,
+ .det_pin = -EINVAL,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
#endif
@@ -137,6 +143,8 @@ static struct at91_mmc_data __initdata mmc_data = {
*/
static struct at91_usbh_data __initdata usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
@@ -145,19 +153,19 @@ static struct at91_usbh_data __initdata usbh_data = {
*/
static struct at91_udc_data __initdata portuxg20_udc_data = {
.vbus_pin = AT91_PIN_PC7,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
.vbus_pin = AT91_PIN_PA22,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
.phy_irq_pin = AT91_PIN_PA28,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 0a20bab21f9..26c36fc2d1e 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -66,6 +66,8 @@ static void __init ek_init_early(void)
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -73,7 +75,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PB11,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
static void __init ek_add_device_udc(void)
@@ -146,7 +148,7 @@ static void __init ek_add_device_spi(void)
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
@@ -193,7 +195,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
-// .det_pin = ... not connected
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PA22,
.enable_pin = AT91_PIN_PD15,
.parts = ek_nand_partition,
@@ -245,9 +247,9 @@ static void __init ek_add_device_nand(void)
/* configure chip-select 3 (NAND) */
if (machine_is_usb_a9g20())
- sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
+ sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config);
else
- sam9_smc_configure(3, &usb_a9260_nand_smc_config);
+ sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@@ -344,7 +346,7 @@ static void __init ek_board_init(void)
/* I2C */
at91_add_device_i2c(NULL, 0);
/* shutdown controller, wakeup button (5 msec low) */
- at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
+ at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
| AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
}
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 12a3f955162..bbd553e1cd9 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -110,7 +110,7 @@ static struct gpio_led yl9200_leds[] = {
/*
* Ethernet
*/
-static struct at91_eth_data __initdata yl9200_eth_data = {
+static struct macb_platform_data __initdata yl9200_eth_data = {
.phy_irq_pin = AT91_PIN_PB28,
.is_rmii = 1,
};
@@ -120,6 +120,8 @@ static struct at91_eth_data __initdata yl9200_eth_data = {
*/
static struct at91_usbh_data __initdata yl9200_usbh_data = {
.ports = 1, /* PQFP version of AT91RM9200 */
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -137,8 +139,9 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
*/
static struct at91_mmc_data __initdata yl9200_mmc_data = {
.det_pin = AT91_PIN_PB9,
- // .wp_pin = ... not connected
.wire4 = 1,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
/*
@@ -175,7 +178,7 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
static struct atmel_nand_data __initdata yl9200_nand_data = {
.ale = 6,
.cle = 7,
- // .det_pin = ... not connected
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
.enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
.parts = yl9200_nand_partition,
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 938b34f5774..4866b8180d6 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -29,6 +29,7 @@ extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
struct sys_timer;
extern struct sys_timer at91rm9200_timer;
+extern void at91sam926x_ioremap_pit(u32 addr);
extern struct sys_timer at91sam926x_timer;
extern struct sys_timer at91x40_timer;
@@ -57,7 +58,10 @@ extern void at91_irq_suspend(void);
extern void at91_irq_resume(void);
/* reset */
-extern void at91sam9_alt_reset(void);
+extern void at91sam9_alt_restart(char, const char *);
+
+/* shutdown */
+extern void at91_ioremap_shdwc(u32 base_addr);
/* GPIO */
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
@@ -65,11 +69,9 @@ extern void at91sam9_alt_reset(void);
struct at91_gpio_bank {
unsigned short id; /* peripheral ID */
- unsigned long offset; /* offset from system peripheral base */
- struct clk *clock; /* associated clock */
+ unsigned long regbase; /* offset from system peripheral base */
};
extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
extern void __init at91_gpio_irq_setup(void);
-extern void (*at91_arch_reset)(void);
extern int at91_extern_irq;
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 224e9e2f867..74d6783eeab 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -29,8 +29,9 @@
struct at91_gpio_chip {
struct gpio_chip chip;
struct at91_gpio_chip *next; /* Bank sharing same clock */
- struct at91_gpio_bank *bank; /* Bank definition */
+ int id; /* ID of register bank */
void __iomem *regbase; /* Base of register bank */
+ struct clk *clock; /* associated clock */
};
#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
@@ -58,18 +59,17 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip,
}
static struct at91_gpio_chip gpio_chip[] = {
- AT91_GPIO_CHIP("A", 0x00 + PIN_BASE, 32),
- AT91_GPIO_CHIP("B", 0x20 + PIN_BASE, 32),
- AT91_GPIO_CHIP("C", 0x40 + PIN_BASE, 32),
- AT91_GPIO_CHIP("D", 0x60 + PIN_BASE, 32),
- AT91_GPIO_CHIP("E", 0x80 + PIN_BASE, 32),
+ AT91_GPIO_CHIP("pioA", 0x00, 32),
+ AT91_GPIO_CHIP("pioB", 0x20, 32),
+ AT91_GPIO_CHIP("pioC", 0x40, 32),
+ AT91_GPIO_CHIP("pioD", 0x60, 32),
+ AT91_GPIO_CHIP("pioE", 0x80, 32),
};
static int gpio_banks;
static inline void __iomem *pin_to_controller(unsigned pin)
{
- pin -= PIN_BASE;
pin /= 32;
if (likely(pin < gpio_banks))
return gpio_chip[pin].regbase;
@@ -79,7 +79,6 @@ static inline void __iomem *pin_to_controller(unsigned pin)
static inline unsigned pin_to_mask(unsigned pin)
{
- pin -= PIN_BASE;
return 1 << (pin % 32);
}
@@ -274,8 +273,9 @@ static u32 backups[MAX_GPIO_BANKS];
static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
{
- unsigned mask = pin_to_mask(d->irq);
- unsigned bank = (d->irq - PIN_BASE) / 32;
+ unsigned pin = irq_to_gpio(d->irq);
+ unsigned mask = pin_to_mask(pin);
+ unsigned bank = pin / 32;
if (unlikely(bank >= MAX_GPIO_BANKS))
return -EINVAL;
@@ -285,7 +285,7 @@ static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
else
wakeups[bank] &= ~mask;
- irq_set_irq_wake(gpio_chip[bank].bank->id, state);
+ irq_set_irq_wake(gpio_chip[bank].id, state);
return 0;
}
@@ -302,7 +302,7 @@ void at91_gpio_suspend(void)
__raw_writel(wakeups[i], pio + PIO_IER);
if (!wakeups[i])
- clk_disable(gpio_chip[i].bank->clock);
+ clk_disable(gpio_chip[i].clock);
else {
#ifdef CONFIG_PM_DEBUG
printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
@@ -319,7 +319,7 @@ void at91_gpio_resume(void)
void __iomem *pio = gpio_chip[i].regbase;
if (!wakeups[i])
- clk_enable(gpio_chip[i].bank->clock);
+ clk_enable(gpio_chip[i].clock);
__raw_writel(wakeups[i], pio + PIO_IDR);
__raw_writel(backups[i], pio + PIO_IER);
@@ -344,8 +344,9 @@ void at91_gpio_resume(void)
static void gpio_irq_mask(struct irq_data *d)
{
- void __iomem *pio = pin_to_controller(d->irq);
- unsigned mask = pin_to_mask(d->irq);
+ unsigned pin = irq_to_gpio(d->irq);
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
if (pio)
__raw_writel(mask, pio + PIO_IDR);
@@ -353,8 +354,9 @@ static void gpio_irq_mask(struct irq_data *d)
static void gpio_irq_unmask(struct irq_data *d)
{
- void __iomem *pio = pin_to_controller(d->irq);
- unsigned mask = pin_to_mask(d->irq);
+ unsigned pin = irq_to_gpio(d->irq);
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
if (pio)
__raw_writel(mask, pio + PIO_IER);
@@ -382,7 +384,7 @@ static struct irq_chip gpio_irqchip = {
static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
- unsigned pin;
+ unsigned irq_pin;
struct irq_data *idata = irq_desc_get_irq_data(desc);
struct irq_chip *chip = irq_data_get_irq_chip(idata);
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
@@ -405,12 +407,12 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
continue;
}
- pin = at91_gpio->chip.base;
+ irq_pin = gpio_to_irq(at91_gpio->chip.base);
while (isr) {
if (isr & 1)
- generic_handle_irq(pin);
- pin++;
+ generic_handle_irq(irq_pin);
+ irq_pin++;
isr >>= 1;
}
}
@@ -438,7 +440,7 @@ static int at91_gpio_show(struct seq_file *s, void *unused)
seq_printf(s, "%i:\t", j);
for (bank = 0; bank < gpio_banks; bank++) {
- unsigned pin = PIN_BASE + (32 * bank) + j;
+ unsigned pin = (32 * bank) + j;
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
@@ -491,27 +493,28 @@ static struct lock_class_key gpio_lock_class;
*/
void __init at91_gpio_irq_setup(void)
{
- unsigned pioc, pin;
+ unsigned pioc, irq = gpio_to_irq(0);
struct at91_gpio_chip *this, *prev;
- for (pioc = 0, pin = PIN_BASE, this = gpio_chip, prev = NULL;
+ for (pioc = 0, this = gpio_chip, prev = NULL;
pioc++ < gpio_banks;
prev = this, this++) {
- unsigned id = this->bank->id;
+ unsigned id = this->id;
unsigned i;
__raw_writel(~0, this->regbase + PIO_IDR);
- for (i = 0, pin = this->chip.base; i < 32; i++, pin++) {
- irq_set_lockdep_class(pin, &gpio_lock_class);
+ for (i = 0, irq = gpio_to_irq(this->chip.base); i < 32;
+ i++, irq++) {
+ irq_set_lockdep_class(irq, &gpio_lock_class);
/*
* Can use the "simple" and not "edge" handler since it's
* shorter, and the AIC handles interrupts sanely.
*/
- irq_set_chip_and_handler(pin, &gpio_irqchip,
+ irq_set_chip_and_handler(irq, &gpio_irqchip,
handle_simple_irq);
- set_irq_flags(pin, IRQF_VALID);
+ set_irq_flags(irq, IRQF_VALID);
}
/* The toplevel handler handles one bank of GPIOs, except
@@ -524,7 +527,7 @@ void __init at91_gpio_irq_setup(void)
irq_set_chip_data(id, this);
irq_set_chained_handler(id, gpio_irq_handler);
}
- pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
+ pr_info("AT91: %d gpio irqs in %d banks\n", irq - gpio_to_irq(0), gpio_banks);
}
/* gpiolib support */
@@ -612,16 +615,26 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
for (i = 0; i < nr_banks; i++) {
at91_gpio = &gpio_chip[i];
- at91_gpio->bank = &data[i];
- at91_gpio->chip.base = PIN_BASE + i * 32;
- at91_gpio->regbase = at91_gpio->bank->offset +
- (void __iomem *)AT91_VA_BASE_SYS;
+ at91_gpio->id = data[i].id;
+ at91_gpio->chip.base = i * 32;
+
+ at91_gpio->regbase = ioremap(data[i].regbase, 512);
+ if (!at91_gpio->regbase) {
+ pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", i);
+ continue;
+ }
+
+ at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label);
+ if (!at91_gpio->clock) {
+ pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", i);
+ continue;
+ }
/* enable PIO controller's clock */
- clk_enable(at91_gpio->bank->clock);
+ clk_enable(at91_gpio->clock);
/* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
- if (last && last->bank->id == at91_gpio->bank->id)
+ if (last && last->id == at91_gpio->id)
last->next = at91_gpio;
last = at91_gpio;
diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h
index 03566799d3b..3045781c473 100644
--- a/arch/arm/mach-at91/include/mach/at91_aic.h
+++ b/arch/arm/mach-at91/include/mach/at91_aic.h
@@ -16,7 +16,19 @@
#ifndef AT91_AIC_H
#define AT91_AIC_H
-#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_aic_base;
+
+#define at91_aic_read(field) \
+ __raw_readl(at91_aic_base + field)
+
+#define at91_aic_write(field, value) \
+ __raw_writel(value, at91_aic_base + field);
+#else
+.extern at91_aic_base
+#endif
+
+#define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */
#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
#define AT91_AIC_SRCTYPE_LOW (0 << 5)
@@ -24,30 +36,30 @@
#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
#define AT91_AIC_SRCTYPE_RISING (3 << 5)
-#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */
-#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */
+#define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */
+#define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR 0x108 /* Interrupt Status Register */
#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
-#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */
-#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */
-#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */
+#define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */
+#define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */
+#define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */
#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
-#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */
-#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */
-#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */
+#define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */
+#define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */
+#define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR 0x138 /* Debug Control Register */
#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
-#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */
+#define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
index dbfe455a4c4..2aa0c5e1349 100644
--- a/arch/arm/mach-at91/include/mach/at91_dbgu.h
+++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h
@@ -19,7 +19,7 @@
#define dbgu_readl(dbgu, field) \
__raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field)
-#ifdef AT91_DBGU
+#if !defined(CONFIG_ARCH_AT91X40)
#define AT91_DBGU_CR (0x00) /* Control Register */
#define AT91_DBGU_MR (0x04) /* Mode Register */
#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */
diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
index 974d0bd05b5..d1f80ad7f4d 100644
--- a/arch/arm/mach-at91/include/mach/at91_pit.h
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -16,16 +16,16 @@
#ifndef AT91_PIT_H
#define AT91_PIT_H
-#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */
+#define AT91_PIT_MR 0x00 /* Mode Register */
#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
-#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */
+#define AT91_PIT_SR 0x04 /* Status Register */
#define AT91_PIT_PITS (1 << 0) /* Timer Status */
-#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */
-#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */
+#define AT91_PIT_PIVR 0x08 /* Periodic Interval Value Register */
+#define AT91_PIT_PIIR 0x0c /* Periodic Interval Image Register */
#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h
index e56f4701a3e..da1945e5f71 100644
--- a/arch/arm/mach-at91/include/mach/at91_rtc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rtc.h
@@ -16,7 +16,7 @@
#ifndef AT91_RTC_H
#define AT91_RTC_H
-#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */
+#define AT91_RTC_CR 0x00 /* Control Register */
#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */
#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */
#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */
@@ -29,44 +29,44 @@
#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
-#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */
+#define AT91_RTC_MR 0x04 /* Mode Register */
#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
-#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */
+#define AT91_RTC_TIMR 0x08 /* Time Register */
#define AT91_RTC_SEC (0x7f << 0) /* Current Second */
#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */
#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */
-#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */
+#define AT91_RTC_CALR 0x0c /* Calendar Register */
#define AT91_RTC_CENT (0x7f << 0) /* Current Century */
#define AT91_RTC_YEAR (0xff << 8) /* Current Year */
#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */
#define AT91_RTC_DAY (7 << 21) /* Current Day */
#define AT91_RTC_DATE (0x3f << 24) /* Current Date */
-#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */
+#define AT91_RTC_TIMALR 0x10 /* Time Alarm Register */
#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */
#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */
#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */
-#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */
+#define AT91_RTC_CALALR 0x14 /* Calendar Alarm Register */
#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */
#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */
-#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */
+#define AT91_RTC_SR 0x18 /* Status Register */
#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */
#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */
#define AT91_RTC_SECEV (1 << 2) /* Second Event */
#define AT91_RTC_TIMEV (1 << 3) /* Time Event */
#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */
-#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */
-#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */
-#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */
-#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */
+#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */
+#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */
+#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */
+#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */
-#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */
+#define AT91_RTC_VER 0x2c /* Valid Entry Register */
#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */
#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
index c4ce07e8a8f..1d4fe822c77 100644
--- a/arch/arm/mach-at91/include/mach/at91_shdwc.h
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -16,11 +16,21 @@
#ifndef AT91_SHDWC_H
#define AT91_SHDWC_H
-#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_shdwc_base;
+
+#define at91_shdwc_read(field) \
+ __raw_readl(at91_shdwc_base + field)
+
+#define at91_shdwc_write(field, value) \
+ __raw_writel(value, at91_shdwc_base + field);
+#endif
+
+#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
#define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */
#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */
-#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */
+#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */
#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */
#define AT91_SHDW_WKMODE0_NONE 0
#define AT91_SHDW_WKMODE0_HIGH 1
@@ -30,7 +40,7 @@
#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
-#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */
+#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index c5df1e8f195..4c0e2f6011d 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -79,29 +79,28 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
-#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
-#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
-#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_GPBR (cpu_is_at91cap9_revB() ? \
(0xfffffd50 - AT91_BASE_SYS) : \
(0xfffffd60 - AT91_BASE_SYS))
+#define AT91CAP9_BASE_ECC 0xffffe200
+#define AT91CAP9_BASE_DMA 0xffffec00
+#define AT91CAP9_BASE_SMC 0xffffe800
+#define AT91CAP9_BASE_DBGU AT91_BASE_DBGU1
+#define AT91CAP9_BASE_PIOA 0xfffff200
+#define AT91CAP9_BASE_PIOB 0xfffff400
+#define AT91CAP9_BASE_PIOC 0xfffff600
+#define AT91CAP9_BASE_PIOD 0xfffff800
+#define AT91CAP9_BASE_SHDWC 0xfffffd10
+#define AT91CAP9_BASE_RTT 0xfffffd20
+#define AT91CAP9_BASE_PIT 0xfffffd30
+#define AT91CAP9_BASE_WDT 0xfffffd40
+
#define AT91_USART0 AT91CAP9_BASE_US0
#define AT91_USART1 AT91CAP9_BASE_US1
#define AT91_USART2 AT91CAP9_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index e4037b50030..bacb5114181 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -79,17 +79,17 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */
-#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */
#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */
-#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */
#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */
+#define AT91RM9200_BASE_DBGU AT91_BASE_DBGU0 /* Debug Unit */
+#define AT91RM9200_BASE_PIOA 0xfffff400 /* PIO Controller A */
+#define AT91RM9200_BASE_PIOB 0xfffff600 /* PIO Controller B */
+#define AT91RM9200_BASE_PIOC 0xfffff800 /* PIO Controller C */
+#define AT91RM9200_BASE_PIOD 0xfffffa00 /* PIO Controller D */
+#define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */
+
#define AT91_USART0 AT91RM9200_BASE_US0
#define AT91_USART1 AT91RM9200_BASE_US1
#define AT91_USART2 AT91RM9200_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 9a791165913..f937c476bb6 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -80,24 +80,23 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
-#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91SAM9260_BASE_ECC 0xffffe800
+#define AT91SAM9260_BASE_SMC 0xffffec00
+#define AT91SAM9260_BASE_DBGU AT91_BASE_DBGU0
+#define AT91SAM9260_BASE_PIOA 0xfffff400
+#define AT91SAM9260_BASE_PIOB 0xfffff600
+#define AT91SAM9260_BASE_PIOC 0xfffff800
+#define AT91SAM9260_BASE_SHDWC 0xfffffd10
+#define AT91SAM9260_BASE_RTT 0xfffffd20
+#define AT91SAM9260_BASE_PIT 0xfffffd30
+#define AT91SAM9260_BASE_WDT 0xfffffd40
+
#define AT91_USART0 AT91SAM9260_BASE_US0
#define AT91_USART1 AT91SAM9260_BASE_US1
#define AT91_USART2 AT91SAM9260_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index ce596204cef..175604e261b 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -66,21 +66,21 @@
* System Peripherals (offset from AT91_BASE_SYS)
*/
#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+#define AT91SAM9261_BASE_SMC 0xffffec00
+#define AT91SAM9261_BASE_DBGU AT91_BASE_DBGU0
+#define AT91SAM9261_BASE_PIOA 0xfffff400
+#define AT91SAM9261_BASE_PIOB 0xfffff600
+#define AT91SAM9261_BASE_PIOC 0xfffff800
+#define AT91SAM9261_BASE_SHDWC 0xfffffd10
+#define AT91SAM9261_BASE_RTT 0xfffffd20
+#define AT91SAM9261_BASE_PIT 0xfffffd30
+#define AT91SAM9261_BASE_WDT 0xfffffd40
+
#define AT91_USART0 AT91SAM9261_BASE_US0
#define AT91_USART1 AT91SAM9261_BASE_US1
#define AT91_USART2 AT91SAM9261_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index f1b92961a2b..80c915002d8 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -74,30 +74,29 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
-#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS)
#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
-#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS)
-#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS)
#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS)
-#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+#define AT91SAM9263_BASE_ECC0 0xffffe000
+#define AT91SAM9263_BASE_SMC0 0xffffe400
+#define AT91SAM9263_BASE_ECC1 0xffffe600
+#define AT91SAM9263_BASE_SMC1 0xffffea00
+#define AT91SAM9263_BASE_DBGU AT91_BASE_DBGU1
+#define AT91SAM9263_BASE_PIOA 0xfffff200
+#define AT91SAM9263_BASE_PIOB 0xfffff400
+#define AT91SAM9263_BASE_PIOC 0xfffff600
+#define AT91SAM9263_BASE_PIOD 0xfffff800
+#define AT91SAM9263_BASE_PIOE 0xfffffa00
+#define AT91SAM9263_BASE_SHDWC 0xfffffd10
+#define AT91SAM9263_BASE_RTT0 0xfffffd20
+#define AT91SAM9263_BASE_PIT 0xfffffd30
+#define AT91SAM9263_BASE_WDT 0xfffffd40
+#define AT91SAM9263_BASE_RTT1 0xfffffd50
+
#define AT91_USART0 AT91SAM9263_BASE_US0
#define AT91_USART1 AT91SAM9263_BASE_US1
#define AT91_USART2 AT91SAM9263_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index 57de6207e57..eb18a70fa64 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -16,7 +16,9 @@
#ifndef AT91SAM9_SMC_H
#define AT91SAM9_SMC_H
-#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+#include <mach/cpu.h>
+
+#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */
#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
#define AT91_SMC_NWESETUP_(x) ((x) << 0)
#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
@@ -26,7 +28,7 @@
#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
-#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+#define AT91_SMC_PULSE 0x04 /* Pulse Register for CS n */
#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
@@ -36,13 +38,13 @@
#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+#define AT91_SMC_CYCLE 0x08 /* Cycle Register for CS n */
#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
-#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+#define AT91_SMC_MODE 0x0c /* Mode Register for CS n */
#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
@@ -66,11 +68,4 @@
#define AT91_SMC_PS_16 (2 << 28)
#define AT91_SMC_PS_32 (3 << 28)
-#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
-#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-#endif
-
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 406bb649680..f0c23c960de 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -86,27 +86,27 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
-#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS)
#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
-#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
-#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC (0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91SAM9G45_BASE_ECC 0xffffe200
+#define AT91SAM9G45_BASE_DMA 0xffffec00
+#define AT91SAM9G45_BASE_SMC 0xffffe800
+#define AT91SAM9G45_BASE_DBGU AT91_BASE_DBGU1
+#define AT91SAM9G45_BASE_PIOA 0xfffff200
+#define AT91SAM9G45_BASE_PIOB 0xfffff400
+#define AT91SAM9G45_BASE_PIOC 0xfffff600
+#define AT91SAM9G45_BASE_PIOD 0xfffff800
+#define AT91SAM9G45_BASE_PIOE 0xfffffa00
+#define AT91SAM9G45_BASE_SHDWC 0xfffffd10
+#define AT91SAM9G45_BASE_RTT 0xfffffd20
+#define AT91SAM9G45_BASE_PIT 0xfffffd30
+#define AT91SAM9G45_BASE_WDT 0xfffffd40
+#define AT91SAM9G45_BASE_RTC 0xfffffdb0
#define AT91_USART0 AT91SAM9G45_BASE_US0
#define AT91_USART1 AT91SAM9G45_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index 1aabacd315d..2bb359e60b9 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -69,27 +69,26 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
-#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
-#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
+
+#define AT91SAM9RL_BASE_DMA 0xffffe600
+#define AT91SAM9RL_BASE_ECC 0xffffe800
+#define AT91SAM9RL_BASE_SMC 0xffffec00
+#define AT91SAM9RL_BASE_DBGU AT91_BASE_DBGU0
+#define AT91SAM9RL_BASE_PIOA 0xfffff400
+#define AT91SAM9RL_BASE_PIOB 0xfffff600
+#define AT91SAM9RL_BASE_PIOC 0xfffff800
+#define AT91SAM9RL_BASE_PIOD 0xfffffa00
+#define AT91SAM9RL_BASE_SHDWC 0xfffffd10
+#define AT91SAM9RL_BASE_RTT 0xfffffd20
+#define AT91SAM9RL_BASE_PIT 0xfffffd30
+#define AT91SAM9RL_BASE_WDT 0xfffffd40
+#define AT91SAM9RL_BASE_RTC 0xfffffe00
#define AT91_USART0 AT91SAM9RL_BASE_US0
#define AT91_USART1 AT91SAM9RL_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index a152ff87e68..a57829f4fd1 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -40,7 +40,6 @@
#define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */
#define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */
#define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
/*
* The AT91x40 series doesn't have a debug unit like the other AT91 parts.
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index eac92e995bb..d0b377b21bd 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -40,13 +40,14 @@
#include <linux/atmel-mci.h>
#include <sound/atmel-ac97c.h>
#include <linux/serial.h>
+#include <linux/platform_data/macb.h>
/* USB Device */
struct at91_udc_data {
- u8 vbus_pin; /* high == host powering us */
+ int vbus_pin; /* high == host powering us */
u8 vbus_active_low; /* vbus polarity */
u8 vbus_polled; /* Use polling, not interrupt */
- u8 pullup_pin; /* active == D+ pulled up */
+ int pullup_pin; /* active == D+ pulled up */
u8 pullup_active_low; /* true == pullup_pin is active low */
};
extern void __init at91_add_device_udc(struct at91_udc_data *data);
@@ -56,10 +57,10 @@ extern void __init at91_add_device_usba(struct usba_platform_data *data);
/* Compact Flash */
struct at91_cf_data {
- u8 irq_pin; /* I/O IRQ */
- u8 det_pin; /* Card detect */
- u8 vcc_pin; /* power switching */
- u8 rst_pin; /* card reset */
+ int irq_pin; /* I/O IRQ */
+ int det_pin; /* Card detect */
+ int vcc_pin; /* power switching */
+ int rst_pin; /* card reset */
u8 chipselect; /* EBI Chip Select number */
u8 flags;
#define AT91_CF_TRUE_IDE 0x01
@@ -70,37 +71,26 @@ extern void __init at91_add_device_cf(struct at91_cf_data *data);
/* MMC / SD */
/* at91_mci platform config */
struct at91_mmc_data {
- u8 det_pin; /* card detect IRQ */
+ int det_pin; /* card detect IRQ */
unsigned slot_b:1; /* uses Slot B */
unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
- u8 wp_pin; /* (SD) writeprotect detect */
- u8 vcc_pin; /* power switching (high == on) */
+ int wp_pin; /* (SD) writeprotect detect */
+ int vcc_pin; /* power switching (high == on) */
};
extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
/* atmel-mci platform config */
extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
- /* Ethernet (EMAC & MACB) */
-struct at91_eth_data {
- u32 phy_mask;
- u8 phy_irq_pin; /* PHY IRQ */
- u8 is_rmii; /* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
-#define eth_platform_data at91_eth_data
-#endif
+extern void __init at91_add_device_eth(struct macb_platform_data *data);
/* USB Host */
struct at91_usbh_data {
u8 ports; /* number of ports on root hub */
- u8 vbus_pin[2]; /* port power-control pin */
+ int vbus_pin[2]; /* port power-control pin */
u8 vbus_pin_inverted;
u8 overcurrent_supported;
- u8 overcurrent_pin[2];
+ int overcurrent_pin[2];
u8 overcurrent_status[2];
u8 overcurrent_changed[2];
};
@@ -110,9 +100,9 @@ extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
/* NAND / SmartMedia */
struct atmel_nand_data {
- u8 enable_pin; /* chip enable */
- u8 det_pin; /* card detect */
- u8 rdy_pin; /* ready/busy */
+ int enable_pin; /* chip enable */
+ int det_pin; /* card detect */
+ int rdy_pin; /* ready/busy */
u8 rdy_pin_active_low; /* rdy_pin value is inverted */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 0ed8648c645..c6bb9e2d9ba 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,9 +14,15 @@
#include <mach/hardware.h>
#include <mach/at91_dbgu.h>
+#if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
+#define AT91_DBGU AT91_BASE_DBGU0
+#else
+#define AT91_DBGU AT91_BASE_DBGU1
+#endif
+
.macro addruart, rp, rv, tmp
- ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
- ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
+ ldr \rp, =AT91_DBGU @ System peripherals (phys address)
+ ldr \rv, =AT91_IO_P2V(AT91_DBGU) @ System peripherals (virt address)
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
index 7ab68f97222..423eea0ed74 100644
--- a/arch/arm/mach-at91/include/mach/entry-macro.S
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -17,16 +17,17 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
+ ldr \base, =at91_aic_base @ base virtual address of AIC peripheral
+ ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
- ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
- teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
- streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now.
+ ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+ ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
+ teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
+ streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now.
.endm
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 2b9a1f51210..e3fd225121c 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -16,177 +16,175 @@
#include <linux/kernel.h>
#include <asm/irq.h>
-#define PIN_BASE NR_AIC_IRQS
-
#define MAX_GPIO_BANKS 5
-#define NR_BUILTIN_GPIO (PIN_BASE + (MAX_GPIO_BANKS * 32))
+#define NR_BUILTIN_GPIO (MAX_GPIO_BANKS * 32)
/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
-#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
-#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
-#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
-#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
-#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
-#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
-#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
-#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
-#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
-#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
-#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
-#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
-#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
-#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
-#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
-#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
-#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
-#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
-#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
-#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
-#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
-#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
-#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
-#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
-#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
-#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
-#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
-#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
-#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
-#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
-#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
-
-#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0)
-#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1)
-#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
-#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
-#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
-#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
-#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
-#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
-#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
-#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
-#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
-#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
-#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
-#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
-#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
-#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
-#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
-#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
-#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
-#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
-#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
-#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
-#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
-#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
-#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
-#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
-#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
-#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
-#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
-#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
-#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
-#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
-
-#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0)
-#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1)
-#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
-#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
-#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
-#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
-#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
-#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
-#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
-#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
-#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
-#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
-#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
-#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
-#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
-#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
-#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
-#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
-#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
-#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
-#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
-#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
-#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
-#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
-#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
-#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
-#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
-#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
-#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
-#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
-#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
-#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
-
-#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0)
-#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1)
-#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
-#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
-#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
-#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
-#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
-#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
-#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
-#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
-#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
-#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
-#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
-#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
-#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
-#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
-#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
-#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
-#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
-#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
-#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
-#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
-#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
-#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
-#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
-#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
-#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
-#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
-#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
-#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
-#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
-#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
-
-#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
-#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
-#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
-#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
-#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
-#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
-#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
-#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
-#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
-#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
-#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
-#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
-#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
-#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
-#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
-#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
-#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
-#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
-#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
-#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
-#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
-#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
-#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
-#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
-#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
-#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
-#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
-#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
-#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
-#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
-#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
-#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
+#define AT91_PIN_PA0 (0x00 + 0)
+#define AT91_PIN_PA1 (0x00 + 1)
+#define AT91_PIN_PA2 (0x00 + 2)
+#define AT91_PIN_PA3 (0x00 + 3)
+#define AT91_PIN_PA4 (0x00 + 4)
+#define AT91_PIN_PA5 (0x00 + 5)
+#define AT91_PIN_PA6 (0x00 + 6)
+#define AT91_PIN_PA7 (0x00 + 7)
+#define AT91_PIN_PA8 (0x00 + 8)
+#define AT91_PIN_PA9 (0x00 + 9)
+#define AT91_PIN_PA10 (0x00 + 10)
+#define AT91_PIN_PA11 (0x00 + 11)
+#define AT91_PIN_PA12 (0x00 + 12)
+#define AT91_PIN_PA13 (0x00 + 13)
+#define AT91_PIN_PA14 (0x00 + 14)
+#define AT91_PIN_PA15 (0x00 + 15)
+#define AT91_PIN_PA16 (0x00 + 16)
+#define AT91_PIN_PA17 (0x00 + 17)
+#define AT91_PIN_PA18 (0x00 + 18)
+#define AT91_PIN_PA19 (0x00 + 19)
+#define AT91_PIN_PA20 (0x00 + 20)
+#define AT91_PIN_PA21 (0x00 + 21)
+#define AT91_PIN_PA22 (0x00 + 22)
+#define AT91_PIN_PA23 (0x00 + 23)
+#define AT91_PIN_PA24 (0x00 + 24)
+#define AT91_PIN_PA25 (0x00 + 25)
+#define AT91_PIN_PA26 (0x00 + 26)
+#define AT91_PIN_PA27 (0x00 + 27)
+#define AT91_PIN_PA28 (0x00 + 28)
+#define AT91_PIN_PA29 (0x00 + 29)
+#define AT91_PIN_PA30 (0x00 + 30)
+#define AT91_PIN_PA31 (0x00 + 31)
+
+#define AT91_PIN_PB0 (0x20 + 0)
+#define AT91_PIN_PB1 (0x20 + 1)
+#define AT91_PIN_PB2 (0x20 + 2)
+#define AT91_PIN_PB3 (0x20 + 3)
+#define AT91_PIN_PB4 (0x20 + 4)
+#define AT91_PIN_PB5 (0x20 + 5)
+#define AT91_PIN_PB6 (0x20 + 6)
+#define AT91_PIN_PB7 (0x20 + 7)
+#define AT91_PIN_PB8 (0x20 + 8)
+#define AT91_PIN_PB9 (0x20 + 9)
+#define AT91_PIN_PB10 (0x20 + 10)
+#define AT91_PIN_PB11 (0x20 + 11)
+#define AT91_PIN_PB12 (0x20 + 12)
+#define AT91_PIN_PB13 (0x20 + 13)
+#define AT91_PIN_PB14 (0x20 + 14)
+#define AT91_PIN_PB15 (0x20 + 15)
+#define AT91_PIN_PB16 (0x20 + 16)
+#define AT91_PIN_PB17 (0x20 + 17)
+#define AT91_PIN_PB18 (0x20 + 18)
+#define AT91_PIN_PB19 (0x20 + 19)
+#define AT91_PIN_PB20 (0x20 + 20)
+#define AT91_PIN_PB21 (0x20 + 21)
+#define AT91_PIN_PB22 (0x20 + 22)
+#define AT91_PIN_PB23 (0x20 + 23)
+#define AT91_PIN_PB24 (0x20 + 24)
+#define AT91_PIN_PB25 (0x20 + 25)
+#define AT91_PIN_PB26 (0x20 + 26)
+#define AT91_PIN_PB27 (0x20 + 27)
+#define AT91_PIN_PB28 (0x20 + 28)
+#define AT91_PIN_PB29 (0x20 + 29)
+#define AT91_PIN_PB30 (0x20 + 30)
+#define AT91_PIN_PB31 (0x20 + 31)
+
+#define AT91_PIN_PC0 (0x40 + 0)
+#define AT91_PIN_PC1 (0x40 + 1)
+#define AT91_PIN_PC2 (0x40 + 2)
+#define AT91_PIN_PC3 (0x40 + 3)
+#define AT91_PIN_PC4 (0x40 + 4)
+#define AT91_PIN_PC5 (0x40 + 5)
+#define AT91_PIN_PC6 (0x40 + 6)
+#define AT91_PIN_PC7 (0x40 + 7)
+#define AT91_PIN_PC8 (0x40 + 8)
+#define AT91_PIN_PC9 (0x40 + 9)
+#define AT91_PIN_PC10 (0x40 + 10)
+#define AT91_PIN_PC11 (0x40 + 11)
+#define AT91_PIN_PC12 (0x40 + 12)
+#define AT91_PIN_PC13 (0x40 + 13)
+#define AT91_PIN_PC14 (0x40 + 14)
+#define AT91_PIN_PC15 (0x40 + 15)
+#define AT91_PIN_PC16 (0x40 + 16)
+#define AT91_PIN_PC17 (0x40 + 17)
+#define AT91_PIN_PC18 (0x40 + 18)
+#define AT91_PIN_PC19 (0x40 + 19)
+#define AT91_PIN_PC20 (0x40 + 20)
+#define AT91_PIN_PC21 (0x40 + 21)
+#define AT91_PIN_PC22 (0x40 + 22)
+#define AT91_PIN_PC23 (0x40 + 23)
+#define AT91_PIN_PC24 (0x40 + 24)
+#define AT91_PIN_PC25 (0x40 + 25)
+#define AT91_PIN_PC26 (0x40 + 26)
+#define AT91_PIN_PC27 (0x40 + 27)
+#define AT91_PIN_PC28 (0x40 + 28)
+#define AT91_PIN_PC29 (0x40 + 29)
+#define AT91_PIN_PC30 (0x40 + 30)
+#define AT91_PIN_PC31 (0x40 + 31)
+
+#define AT91_PIN_PD0 (0x60 + 0)
+#define AT91_PIN_PD1 (0x60 + 1)
+#define AT91_PIN_PD2 (0x60 + 2)
+#define AT91_PIN_PD3 (0x60 + 3)
+#define AT91_PIN_PD4 (0x60 + 4)
+#define AT91_PIN_PD5 (0x60 + 5)
+#define AT91_PIN_PD6 (0x60 + 6)
+#define AT91_PIN_PD7 (0x60 + 7)
+#define AT91_PIN_PD8 (0x60 + 8)
+#define AT91_PIN_PD9 (0x60 + 9)
+#define AT91_PIN_PD10 (0x60 + 10)
+#define AT91_PIN_PD11 (0x60 + 11)
+#define AT91_PIN_PD12 (0x60 + 12)
+#define AT91_PIN_PD13 (0x60 + 13)
+#define AT91_PIN_PD14 (0x60 + 14)
+#define AT91_PIN_PD15 (0x60 + 15)
+#define AT91_PIN_PD16 (0x60 + 16)
+#define AT91_PIN_PD17 (0x60 + 17)
+#define AT91_PIN_PD18 (0x60 + 18)
+#define AT91_PIN_PD19 (0x60 + 19)
+#define AT91_PIN_PD20 (0x60 + 20)
+#define AT91_PIN_PD21 (0x60 + 21)
+#define AT91_PIN_PD22 (0x60 + 22)
+#define AT91_PIN_PD23 (0x60 + 23)
+#define AT91_PIN_PD24 (0x60 + 24)
+#define AT91_PIN_PD25 (0x60 + 25)
+#define AT91_PIN_PD26 (0x60 + 26)
+#define AT91_PIN_PD27 (0x60 + 27)
+#define AT91_PIN_PD28 (0x60 + 28)
+#define AT91_PIN_PD29 (0x60 + 29)
+#define AT91_PIN_PD30 (0x60 + 30)
+#define AT91_PIN_PD31 (0x60 + 31)
+
+#define AT91_PIN_PE0 (0x80 + 0)
+#define AT91_PIN_PE1 (0x80 + 1)
+#define AT91_PIN_PE2 (0x80 + 2)
+#define AT91_PIN_PE3 (0x80 + 3)
+#define AT91_PIN_PE4 (0x80 + 4)
+#define AT91_PIN_PE5 (0x80 + 5)
+#define AT91_PIN_PE6 (0x80 + 6)
+#define AT91_PIN_PE7 (0x80 + 7)
+#define AT91_PIN_PE8 (0x80 + 8)
+#define AT91_PIN_PE9 (0x80 + 9)
+#define AT91_PIN_PE10 (0x80 + 10)
+#define AT91_PIN_PE11 (0x80 + 11)
+#define AT91_PIN_PE12 (0x80 + 12)
+#define AT91_PIN_PE13 (0x80 + 13)
+#define AT91_PIN_PE14 (0x80 + 14)
+#define AT91_PIN_PE15 (0x80 + 15)
+#define AT91_PIN_PE16 (0x80 + 16)
+#define AT91_PIN_PE17 (0x80 + 17)
+#define AT91_PIN_PE18 (0x80 + 18)
+#define AT91_PIN_PE19 (0x80 + 19)
+#define AT91_PIN_PE20 (0x80 + 20)
+#define AT91_PIN_PE21 (0x80 + 21)
+#define AT91_PIN_PE22 (0x80 + 22)
+#define AT91_PIN_PE23 (0x80 + 23)
+#define AT91_PIN_PE24 (0x80 + 24)
+#define AT91_PIN_PE25 (0x80 + 25)
+#define AT91_PIN_PE26 (0x80 + 26)
+#define AT91_PIN_PE27 (0x80 + 27)
+#define AT91_PIN_PE28 (0x80 + 28)
+#define AT91_PIN_PE29 (0x80 + 29)
+#define AT91_PIN_PE30 (0x80 + 30)
+#define AT91_PIN_PE31 (0x80 + 31)
#ifndef __ASSEMBLY__
/* setup setup routines, called from board init or driver probe() */
@@ -215,8 +213,8 @@ extern void at91_gpio_resume(void);
#include <asm/errno.h>
-#define gpio_to_irq(gpio) (gpio)
-#define irq_to_gpio(irq) (irq)
+#define gpio_to_irq(gpio) (gpio + NR_AIC_IRQS)
+#define irq_to_gpio(irq) (irq - NR_AIC_IRQS)
#endif /* __ASSEMBLY__ */
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 483478d8be6..2d0e4e99856 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -16,6 +16,12 @@
#include <asm/sizes.h>
+/* DBGU base */
+/* rm9200, 9260/9g20, 9261/9g10, 9rl */
+#define AT91_BASE_DBGU0 0xfffff200
+/* 9263, 9g45, cap9 */
+#define AT91_BASE_DBGU1 0xffffee00
+
#if defined(CONFIG_ARCH_AT91RM9200)
#include <mach/at91rm9200.h>
#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
@@ -52,6 +58,12 @@
#endif
/*
+ * On all at91 have the Advanced Interrupt Controller starts at address
+ * 0xfffff000
+ */
+#define AT91_AIC 0xfffff000
+
+/*
* Peripheral identifiers/interrupts.
*/
#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
index 36bd55f3fc6..ac8b7dfc85e 100644
--- a/arch/arm/mach-at91/include/mach/irqs.h
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -31,7 +31,7 @@
* Acknowledge interrupt with AIC after interrupt has been handled.
* (by kernel/irq.c)
*/
-#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
+#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0)
/*
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index 36af14bc13b..cbd64f3bcec 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -47,13 +47,4 @@ static inline void arch_idle(void)
#endif
}
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- /* call the CPU-specific reset function */
- if (at91_arch_reset)
- (at91_arch_reset)();
-}
-
#endif
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 85820ad801c..5e917a66edd 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -23,70 +23,15 @@
#include <mach/hardware.h>
-#if defined(CONFIG_ARCH_AT91RM9200)
+#ifdef CONFIG_ARCH_AT91X40
-#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
-
-#elif defined(CONFIG_ARCH_AT91SAM9260)
-
-#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
-#define AT91SAM9_MASTER_CLOCK 90000000
-#else
-#define AT91SAM9_MASTER_CLOCK 99300000
-#endif
-
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-
-#define AT91SAM9_MASTER_CLOCK 99300000
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G10)
-
-#define AT91SAM9_MASTER_CLOCK 133000000
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-
-#if defined(CONFIG_MACH_USB_A9263)
-#define AT91SAM9_MASTER_CLOCK 90000000
-#else
-#define AT91SAM9_MASTER_CLOCK 99959500
-#endif
-
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-
-#define AT91SAM9_MASTER_CLOCK 100000000
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G20)
+#define AT91X40_MASTER_CLOCK 40000000
+#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
-#if defined(CONFIG_MACH_USB_A9G20)
-#define AT91SAM9_MASTER_CLOCK 133000000
#else
-#define AT91SAM9_MASTER_CLOCK 132096000
-#endif
-
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
-#define AT91SAM9_MASTER_CLOCK 133333333
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-
-#define AT91CAP9_MASTER_CLOCK 100000000
-#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91X40)
-
-#define AT91X40_MASTER_CLOCK 40000000
-#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
+#define CLOCK_TICK_RATE 12345678
#endif
-#endif
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 18bdcdeb474..0234fd9d20d 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -24,8 +24,10 @@
#include <linux/io.h>
#include <linux/atmel_serial.h>
-#if defined(CONFIG_AT91_EARLY_DBGU)
-#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
+#if defined(CONFIG_AT91_EARLY_DBGU0)
+#define UART_OFFSET AT91_BASE_DBGU0
+#elif defined(CONFIG_AT91_EARLY_DBGU1)
+#define UART_OFFSET AT91_BASE_DBGU1
#elif defined(CONFIG_AT91_EARLY_USART0)
#define UART_OFFSET AT91_USART0
#elif defined(CONFIG_AT91_EARLY_USART1)
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 9665265ec75..be6b639ecd7 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -33,17 +33,18 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
+void __iomem *at91_aic_base;
static void at91_aic_mask_irq(struct irq_data *d)
{
/* Disable interrupt on AIC */
- at91_sys_write(AT91_AIC_IDCR, 1 << d->irq);
+ at91_aic_write(AT91_AIC_IDCR, 1 << d->irq);
}
static void at91_aic_unmask_irq(struct irq_data *d)
{
/* Enable interrupt on AIC */
- at91_sys_write(AT91_AIC_IECR, 1 << d->irq);
+ at91_aic_write(AT91_AIC_IECR, 1 << d->irq);
}
unsigned int at91_extern_irq;
@@ -77,8 +78,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
return -EINVAL;
}
- smr = at91_sys_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
- at91_sys_write(AT91_AIC_SMR(d->irq), smr | srctype);
+ smr = at91_aic_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
+ at91_aic_write(AT91_AIC_SMR(d->irq), smr | srctype);
return 0;
}
@@ -102,15 +103,15 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value)
void at91_irq_suspend(void)
{
- backups = at91_sys_read(AT91_AIC_IMR);
- at91_sys_write(AT91_AIC_IDCR, backups);
- at91_sys_write(AT91_AIC_IECR, wakeups);
+ backups = at91_aic_read(AT91_AIC_IMR);
+ at91_aic_write(AT91_AIC_IDCR, backups);
+ at91_aic_write(AT91_AIC_IECR, wakeups);
}
void at91_irq_resume(void)
{
- at91_sys_write(AT91_AIC_IDCR, wakeups);
- at91_sys_write(AT91_AIC_IECR, backups);
+ at91_aic_write(AT91_AIC_IDCR, wakeups);
+ at91_aic_write(AT91_AIC_IECR, backups);
}
#else
@@ -133,34 +134,39 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
{
unsigned int i;
+ at91_aic_base = ioremap(AT91_AIC, 512);
+
+ if (!at91_aic_base)
+ panic("Impossible to ioremap AT91_AIC\n");
+
/*
* The IVR is used by macro get_irqnr_and_base to read and verify.
* The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
*/
for (i = 0; i < NR_AIC_IRQS; i++) {
/* Put irq number in Source Vector Register: */
- at91_sys_write(AT91_AIC_SVR(i), i);
+ at91_aic_write(AT91_AIC_SVR(i), i);
/* Active Low interrupt, with the specified priority */
- at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
+ at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
/* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
if (i < 8)
- at91_sys_write(AT91_AIC_EOICR, 0);
+ at91_aic_write(AT91_AIC_EOICR, 0);
}
/*
* Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
* When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
*/
- at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
+ at91_aic_write(AT91_AIC_SPU, NR_AIC_IRQS);
/* No debugging in AIC: Debug (Protect) Control Register */
- at91_sys_write(AT91_AIC_DCR, 0);
+ at91_aic_write(AT91_AIC_DCR, 0);
/* Disable and clear all interrupts initially */
- at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
- at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
+ at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF);
+ at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
}
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 7046158109d..62ad95556c3 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -34,7 +34,7 @@
/*
* Show the reason for the previous system reset.
*/
-#if defined(AT91_SHDWC)
+#if defined(AT91_RSTC)
#include <mach/at91_rstc.h>
#include <mach/at91_shdwc.h>
@@ -58,8 +58,11 @@ static void __init show_reset_status(void)
char *reason, *r2 = reset;
u32 reset_type, wake_type;
+ if (!at91_shdwc_base)
+ return;
+
reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
- wake_type = at91_sys_read(AT91_SHDW_SR);
+ wake_type = at91_shdwc_read(AT91_SHDW_SR);
switch (reset_type) {
case AT91_RSTC_RSTTYP_GENERAL:
@@ -215,7 +218,7 @@ static int at91_pm_enter(suspend_state_t state)
| (1 << AT91_ID_FIQ)
| (1 << AT91_ID_SYS)
| (at91_extern_irq))
- & at91_sys_read(AT91_AIC_IMR),
+ & at91_aic_read(AT91_AIC_IMR),
state);
switch (state) {
@@ -283,7 +286,7 @@ static int at91_pm_enter(suspend_state_t state)
}
pr_debug("AT91: PM - wakeup %08x\n",
- at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
+ at91_aic_read(AT91_AIC_IPR) & at91_aic_read(AT91_AIC_IMR));
error:
target_state = PM_SUSPEND_ON;
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index 5eab6aa621d..8294783b679 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -10,38 +10,58 @@
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <mach/at91sam9_smc.h>
#include "sam9_smc.h"
-void __init sam9_smc_configure(int cs, struct sam9_smc_config* config)
+
+#define AT91_SMC_CS(id, n) (smc_base_addr[id] + ((n) * 0x10))
+
+static void __iomem *smc_base_addr[2];
+
+static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
{
+
/* Setup register */
- at91_sys_write(AT91_SMC_SETUP(cs),
- AT91_SMC_NWESETUP_(config->nwe_setup)
- | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
- | AT91_SMC_NRDSETUP_(config->nrd_setup)
- | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup)
- );
+ __raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
+ | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
+ | AT91_SMC_NRDSETUP_(config->nrd_setup)
+ | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
+ base + AT91_SMC_SETUP);
/* Pulse register */
- at91_sys_write(AT91_SMC_PULSE(cs),
- AT91_SMC_NWEPULSE_(config->nwe_pulse)
- | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
- | AT91_SMC_NRDPULSE_(config->nrd_pulse)
- | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse)
- );
+ __raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
+ | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
+ | AT91_SMC_NRDPULSE_(config->nrd_pulse)
+ | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
+ base + AT91_SMC_PULSE);
/* Cycle register */
- at91_sys_write(AT91_SMC_CYCLE(cs),
- AT91_SMC_NWECYCLE_(config->write_cycle)
- | AT91_SMC_NRDCYCLE_(config->read_cycle)
- );
+ __raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
+ | AT91_SMC_NRDCYCLE_(config->read_cycle),
+ base + AT91_SMC_CYCLE);
/* Mode register */
- at91_sys_write(AT91_SMC_MODE(cs),
- config->mode
- | AT91_SMC_TDF_(config->tdf_cycles)
- );
+ __raw_writel(config->mode
+ | AT91_SMC_TDF_(config->tdf_cycles),
+ base + AT91_SMC_MODE);
+}
+
+void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
+{
+ sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
+}
+
+void __init at91sam9_ioremap_smc(int id, u32 addr)
+{
+ if (id > 1) {
+ pr_warn("%s: id > 2\n", __func__);
+ return;
+ }
+ smc_base_addr[id] = ioremap(addr, 512);
+ if (!smc_base_addr[id])
+ pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr);
}
diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h
index bf72cfb3455..039c5ce17ae 100644
--- a/arch/arm/mach-at91/sam9_smc.h
+++ b/arch/arm/mach-at91/sam9_smc.h
@@ -30,4 +30,5 @@ struct sam9_smc_config {
u8 tdf_cycles:4;
};
-extern void __init sam9_smc_configure(int cs, struct sam9_smc_config* config);
+extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
+extern void __init at91sam9_ioremap_smc(int id, u32 addr);
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index cf98a8f94dc..8bdcc3cb601 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -8,6 +8,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
+#include <linux/pm.h>
#include <asm/mach/map.h>
@@ -15,6 +16,7 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91_pmc.h>
+#include <mach/at91_shdwc.h>
#include "soc.h"
#include "generic.h"
@@ -73,9 +75,6 @@ static struct map_desc at91_io_desc __initdata = {
.type = MT_DEVICE,
};
-#define AT91_DBGU0 0xfffff200
-#define AT91_DBGU1 0xffffee00
-
static void __init soc_detect(u32 dbgu_base)
{
u32 cidr, socid;
@@ -248,9 +247,9 @@ void __init at91_map_io(void)
at91_soc_initdata.type = AT91_SOC_NONE;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
- soc_detect(AT91_DBGU0);
+ soc_detect(AT91_BASE_DBGU0);
if (!at91_soc_is_detected())
- soc_detect(AT91_DBGU1);
+ soc_detect(AT91_BASE_DBGU1);
if (!at91_soc_is_detected())
panic("AT91: Impossible to detect the SOC type");
@@ -267,8 +266,25 @@ void __init at91_map_io(void)
at91_boot_soc.map_io();
}
+void __iomem *at91_shdwc_base = NULL;
+
+static void at91sam9_poweroff(void)
+{
+ at91_shdwc_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+void __init at91_ioremap_shdwc(u32 base_addr)
+{
+ at91_shdwc_base = ioremap(base_addr, 16);
+ if (!at91_shdwc_base)
+ panic("Impossible to ioremap at91_shdwc_base\n");
+ pm_power_off = at91sam9_poweroff;
+}
+
void __init at91_initialize(unsigned long main_clock)
{
+ at91_boot_soc.ioremap_registers();
+
/* Init clock subsystem */
at91_clock_init(main_clock);
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 21ed8816e6f..4588ae6f7ac 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -7,6 +7,7 @@
struct at91_init_soc {
unsigned int *default_irq_priority;
void (*map_io)(void);
+ void (*ioremap_registers)(void);
void (*register_clocks)(void);
void (*init)(void);
};
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 31a143592c8..9e5e7552498 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -49,7 +49,29 @@ HW_DECLARE_SPINLOCK(gpio)
#endif
/* sysctl */
-int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */
+static int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */
+
+static void bcmring_restart(char mode, const char *cmd)
+{
+ printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+ if (mode == 'h') {
+ /* Reboot configured in proc entry */
+ if (bcmring_arch_warm_reboot) {
+ printk("warm reset\n");
+ /* Issue Warm reset (do not reset ethernet switch, keep alive) */
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+ } else {
+ /* Force reset of everything */
+ printk("force reset\n");
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+ } else {
+ /* Force reset of everything */
+ printk("force reset\n");
+ chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+ }
+}
static struct ctl_table_header *bcmring_sysctl_header;
@@ -173,4 +195,5 @@ MACHINE_START(BCMRING, "BCMRING")
.init_irq = bcmring_init_irq,
.timer = &bcmring_timer,
.init_machine = bcmring_init_machine
+ .restart = bcmring_restart,
MACHINE_END
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
index 38b37060d42..cb78250db64 100644
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -20,35 +20,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/csp/chipcHw_inline.h>
-
-extern int bcmring_arch_warm_reboot;
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
-
- if (mode == 'h') {
- /* Reboot configured in proc entry */
- if (bcmring_arch_warm_reboot) {
- printk("warm reset\n");
- /* Issue Warm reset (do not reset ethernet switch, keep alive) */
- chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
- } else {
- /* Force reset of everything */
- printk("force reset\n");
- chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
- }
- } else {
- /* Force reset of everything */
- printk("force reset\n");
- chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
- }
-}
-
#endif
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 0276091b7f8..3fb79a1d0bd 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -68,5 +68,6 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
.map_io = autcpu12_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 25b3bfd0e85..c314f49d6ef 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -59,4 +59,5 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
.map_io = cdb89712_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 1df9ec67aa9..a70147e347a 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -60,4 +60,5 @@ MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
.map_io = ceiva_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 80496c09ac5..dbc7842639d 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -41,5 +41,6 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index ced2a4e406f..ab1711b9b4d 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -220,3 +220,8 @@ struct sys_timer clps711x_timer = {
.init = clps711x_timer_init,
.offset = clps711x_gettimeoffset,
};
+
+void clps711x_restart(char mode, const char *cmd)
+{
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index 2b8b801f1dc..fc0f0650dcb 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -9,3 +9,4 @@ struct sys_timer;
extern void clps711x_map_io(void);
extern void clps711x_init_irq(void);
extern struct sys_timer clps711x_timer;
+extern void clps711x_restart(char mode, const char *cmd);
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index 9721f6111dc..5fad0b4f40a 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -62,4 +62,5 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
.reserve = edb7211_reserve,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index d9925668729..3a3f0b702cb 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -78,4 +78,5 @@ MACHINE_START(FORTUNET, "ARM-FortuNet")
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
index 6c119937d39..23d6ef8c84d 100644
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -32,9 +32,4 @@ static inline void arch_idle(void)
mov r0, r0");
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- soft_restart(0);
-}
-
#endif
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 6ecea95f38b..42ee8f33eaf 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -93,6 +93,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
.map_io = p720t_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
+ .restart = clps711x_restart,
MACHINE_END
static int p720t_hw_init(void)
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 594852fe24c..2c5fb4c7e50 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -204,4 +204,5 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
.timer = &cns3xxx_timer,
.handle_irq = gic_handle_irq,
.init_machine = cns3420_init,
+ .restart = cns3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index fcd225343c6..4894b8c1715 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -22,5 +22,6 @@ static inline void cns3xxx_l2x0_init(void) {}
void __init cns3xxx_map_io(void);
void __init cns3xxx_init_irq(void);
void cns3xxx_power_off(void);
+void cns3xxx_restart(char, const char *);
#endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h
index 4f16c9b79f7..9e56b7dc133 100644
--- a/arch/arm/mach-cns3xxx/include/mach/system.h
+++ b/arch/arm/mach-cns3xxx/include/mach/system.h
@@ -11,7 +11,6 @@
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
-#include <linux/io.h>
#include <asm/proc-fns.h>
static inline void arch_idle(void)
@@ -23,6 +22,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-void arch_reset(char mode, const char *cmd);
-
#endif
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 0c04678615c..36458080332 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -11,9 +11,9 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/atomic.h>
-#include <mach/system.h>
#include <mach/cns3xxx.h>
#include <mach/pm.h>
+#include "core.h"
void cns3xxx_pwr_clk_en(unsigned int block)
{
@@ -89,7 +89,7 @@ void cns3xxx_pwr_soft_rst(unsigned int block)
}
EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
-void arch_reset(char mode, const char *cmd)
+void cns3xxx_restart(char mode, const char *cmd)
{
/*
* To reset, we hit the on-board reset register
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 11c3db98528..dc1afe5be20 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -682,4 +682,5 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
.timer = &davinci_timer,
.init_machine = da830_evm_init,
.dma_zone_size = SZ_128M,
+ .restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6659a90dbca..f8a682f60a4 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1411,4 +1411,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
.timer = &davinci_timer,
.init_machine = da850_evm_init,
.dma_zone_size = SZ_128M,
+ .restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 4e0e707c313..275341f159f 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -357,4 +357,5 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
.timer = &davinci_timer,
.init_machine = dm355_evm_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index ff2d2413279..e99db28181a 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -276,4 +276,5 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
.timer = &davinci_timer,
.init_machine = dm355_leopard_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 46e1f4173b9..346e1de2f5a 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -618,5 +618,6 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
.timer = &davinci_timer,
.init_machine = dm365_evm_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 0cf8abf78d3..a64b49cfedc 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -719,4 +719,5 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
.timer = &davinci_timer,
.init_machine = davinci_evm_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 635bf774015..64017558860 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -799,6 +799,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
.timer = &davinci_timer,
.init_machine = evm_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
@@ -808,5 +809,6 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
.timer = &davinci_timer,
.init_machine = evm_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 3cfff555e8f..672d820e2aa 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -573,4 +573,5 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
.timer = &davinci_timer,
.init_machine = mityomapl138_init,
.dma_zone_size = SZ_128M,
+ .restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index e5f231aefee..6c4a16415d4 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -278,4 +278,5 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
.timer = &davinci_timer,
.init_machine = davinci_ntosd2_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index c6701e4a795..e7c0c7c5349 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -344,4 +344,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
.timer = &davinci_timer,
.init_machine = omapl138_hawk_init,
.dma_zone_size = SZ_128M,
+ .restart = da8xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 5dd4da9d230..0b136a831c5 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -157,4 +157,5 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
.timer = &davinci_timer,
.init_machine = davinci_sffsdr_init,
.dma_zone_size = SZ_128M,
+ .restart = davinci_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index f69e40a29e0..5f14e30b00d 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -283,4 +283,5 @@ MACHINE_START(TNETV107X, "TNETV107X EVM")
.timer = &davinci_timer,
.init_machine = tnetv107x_evm_board_init,
.dma_zone_size = SZ_128M,
+ .restart = tnetv107x_restart,
MACHINE_END
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 865ffe5899a..cb9b2e47510 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -97,9 +97,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
local_flush_tlb_all();
flush_cache_all();
- if (!davinci_soc_info.reset)
- davinci_soc_info.reset = davinci_watchdog_reset;
-
/*
* We want to check CPU revision early for cpu_is_xxxx() macros.
* IO space mapping must be initialized before we can do that.
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index a6bf5dcaef1..deee5c2da75 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1201,7 +1201,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
.gpio_irq = IRQ_DA8XX_GPIO0,
.serial_dev = &da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
- .reset_device = &da8xx_wdt_device,
};
void __init da830_init(void)
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index b047f870227..0ed7fdb64ef 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1121,7 +1121,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
.emac_pdata = &da8xx_emac_pdata,
.sram_dma = DA8XX_ARM_RAM_BASE,
.sram_len = SZ_8K,
- .reset_device = &da8xx_wdt_device,
};
void __init da850_init(void)
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 68def718886..42dbf3dc11a 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -363,6 +363,11 @@ struct platform_device da8xx_wdt_device = {
.resource = da8xx_watchdog_resources,
};
+void da8xx_restart(char mode, const char *cmd)
+{
+ davinci_watchdog_reset(&da8xx_wdt_device);
+}
+
int __init da8xx_register_watchdog(void)
{
return platform_device_register(&da8xx_wdt_device);
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 806a2f02b98..50c0156b426 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -291,6 +291,11 @@ struct platform_device davinci_wdt_device = {
.resource = wdt_resources,
};
+void davinci_restart(char mode, const char *cmd)
+{
+ davinci_watchdog_reset(&davinci_wdt_device);
+}
+
static void davinci_init_wdt(void)
{
platform_device_register(&davinci_wdt_device);
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index fe520d4167a..19667cfc5de 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -853,7 +853,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
.serial_dev = &dm355_serial_device,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
- .reset_device = &davinci_wdt_device,
};
void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 679e168dce3..f15b435cc65 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -1083,7 +1083,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
.emac_pdata = &dm365_emac_pdata,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
- .reset_device = &davinci_wdt_device,
};
void __init dm365_init_asp(struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 3470983aa34..0800f9cf33b 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -767,7 +767,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
.emac_pdata = &dm644x_emac_pdata,
.sram_dma = 0x00008000,
.sram_len = SZ_16K,
- .reset_device = &davinci_wdt_device,
};
void __init dm644x_init_asp(struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index af27c130595..00f774394b1 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -854,7 +854,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
.emac_pdata = &dm646x_emac_pdata,
.sram_dma = 0x10010000,
.sram_len = SZ_32K,
- .reset_device = &davinci_wdt_device,
};
void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index a57cba21e21..5cd39a4e0c9 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -77,14 +77,13 @@ struct davinci_soc_info {
struct emac_platform_data *emac_pdata;
dma_addr_t sram_dma;
unsigned sram_len;
- struct platform_device *reset_device;
- void (*reset)(struct platform_device *);
};
extern struct davinci_soc_info davinci_soc_info;
extern void davinci_common_init(struct davinci_soc_info *soc_info);
extern void davinci_init_ide(void);
+void davinci_restart(char mode, const char *cmd);
/* standard place to map on-chip SRAMs; they *may* support DMA */
#define SRAM_VIRT 0xfffe0000
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index eaca7d8b9d6..ee3461d7ec1 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -91,6 +91,7 @@ int da8xx_register_cpuidle(void);
void __iomem * __init da8xx_get_mem_ctlr(void);
int da850_register_pm(struct platform_device *pdev);
int __init da850_register_sata(unsigned long refclkpn);
+void da8xx_restart(char mode, const char *cmd);
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 2a00fe5ac25..a8ee6c9f0bb 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -16,6 +16,7 @@
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <linux/davinci_emac.h>
+#include <media/davinci/vpif_types.h>
#define DM646X_EMAC_BASE (0x01C80000)
#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000)
@@ -34,58 +35,6 @@ int __init dm646x_init_edma(struct edma_rsv_info *rsv);
void dm646x_video_init(void);
-enum vpif_if_type {
- VPIF_IF_BT656,
- VPIF_IF_BT1120,
- VPIF_IF_RAW_BAYER
-};
-
-struct vpif_interface {
- enum vpif_if_type if_type;
- unsigned hd_pol:1;
- unsigned vd_pol:1;
- unsigned fid_pol:1;
-};
-
-struct vpif_subdev_info {
- const char *name;
- struct i2c_board_info board_info;
- u32 input;
- u32 output;
- unsigned can_route:1;
- struct vpif_interface vpif_if;
-};
-
-struct vpif_display_config {
- int (*set_clock)(int, int);
- struct vpif_subdev_info *subdevinfo;
- int subdev_count;
- const char **output;
- int output_count;
- const char *card_name;
-};
-
-struct vpif_input {
- struct v4l2_input input;
- const char *subdev_name;
-};
-
-#define VPIF_CAPTURE_MAX_CHANNELS 2
-
-struct vpif_capture_chan_config {
- const struct vpif_input *inputs;
- int input_count;
-};
-
-struct vpif_capture_config {
- int (*setup_input_channel_mode)(int);
- int (*setup_input_path)(int, const char *);
- struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
- struct vpif_subdev_info *subdev_info;
- int subdev_count;
- const char *card_name;
-};
-
void dm646x_setup_vpif(struct vpif_display_config *,
struct vpif_capture_config *);
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index e65629c2076..fcb7a015aba 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -18,10 +18,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (davinci_soc_info.reset)
- davinci_soc_info.reset(davinci_soc_info.reset_device);
-}
-
#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 89c1fdc63c0..83e5926f3c4 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -54,6 +54,7 @@ extern struct platform_device tnetv107x_serial_device;
extern void __init tnetv107x_init(void);
extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *);
extern void __init tnetv107x_irq_init(void);
+void tnetv107x_restart(char mode, const char *cmd);
#endif
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 409bb869c7c..dc1a209b9b6 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -730,6 +730,11 @@ static void tnetv107x_watchdog_reset(struct platform_device *pdev)
__raw_writel(1, &regs->kick);
}
+void tnetv107x_restart(char mode, const char *cmd)
+{
+ tnetv107x_watchdog_reset(&tnetv107x_wdt_device);
+}
+
static struct davinci_soc_info tnetv107x_soc_info = {
.io_desc = io_desc,
.io_desc_num = ARRAY_SIZE(io_desc),
@@ -752,8 +757,6 @@ static struct davinci_soc_info tnetv107x_soc_info = {
.gpio_num = TNETV107X_N_GPIO,
.timer_info = &timer_info,
.serial_dev = &tnetv107x_serial_device,
- .reset = tnetv107x_watchdog_reset,
- .reset_device = &tnetv107x_wdt_device,
};
void __init tnetv107x_init(void)
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index c8a406f7e94..792b4e2e24f 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -93,4 +93,5 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board")
.init_early = dove_init_early,
.init_irq = dove_init_irq,
.timer = &dove_timer,
+ .restart = dove_restart,
MACHINE_END
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index a9e0dae86a2..13bb236cd0c 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -292,3 +292,19 @@ void __init dove_init(void)
dove_xor0_init();
dove_xor1_init();
}
+
+void dove_restart(char mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 6a2046e4470..42027305c10 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -39,5 +39,6 @@ void dove_spi1_init(void);
void dove_i2c_init(void);
void dove_sdio0_init(void);
void dove_sdio1_init(void);
+void dove_restart(char, const char *);
#endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 11ea34e4fc7..ea77ae430b2 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -100,4 +100,5 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
.init_early = dove_init_early,
.init_irq = dove_init_irq,
.timer = &dove_timer,
+ .restart = dove_restart,
MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
index 356afda5685..3027954f616 100644
--- a/arch/arm/mach-dove/include/mach/system.h
+++ b/arch/arm/mach-dove/include/mach/system.h
@@ -9,28 +9,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/bridge-regs.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-
#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index ce3ed244c4b..294aad07f7a 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -278,6 +278,11 @@ static int __init ebsa110_init(void)
arch_initcall(ebsa110_init);
+static void ebsa110_restart(char mode, const char *cmd)
+{
+ soft_restart(0x80000000);
+}
+
MACHINE_START(EBSA110, "EBSA110")
/* Maintainer: Russell King */
.atag_offset = 0x400,
@@ -287,4 +292,5 @@ MACHINE_START(EBSA110, "EBSA110")
.map_io = ebsa110_map_io,
.init_irq = ebsa110_init_irq,
.timer = &ebsa110_timer,
+ .restart = ebsa110_restart,
MACHINE_END
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
index 0d5df72a03f..2e4af65edb6 100644
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -34,6 +34,4 @@ static inline void arch_idle(void)
asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
}
-#define arch_reset(mode, cmd) soft_restart(0x80000000)
-
#endif
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index d9b0ea2ba4d..681e939407d 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -40,4 +40,5 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = adssphere_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 2432a6b7dca..24203f9a679 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -906,3 +906,15 @@ void __init ep93xx_init_devices(void)
platform_device_register(&ep93xx_ohci_device);
platform_device_register(&ep93xx_leds);
}
+
+void ep93xx_restart(char mode, const char *cmd)
+{
+ /*
+ * Set then clear the SWRST bit to initiate a software reset
+ */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 9bbae0835f2..d115653edca 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -254,6 +254,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -266,6 +267,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -278,6 +280,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -290,6 +293,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -302,6 +306,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -314,6 +319,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -326,6 +332,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -338,5 +345,6 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = edb93xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 1dd32a7c5f1..af46970dc58 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -40,4 +40,5 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = gesbc9312_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 50660455b1d..d4c934931f9 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -66,4 +66,6 @@ void ep93xx_register_ac97(void);
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
+void ep93xx_restart(char, const char *);
+
#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index bdf6c4f1fee..b5bec7cb9b5 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -1,22 +1,7 @@
/*
* arch/arm/mach-ep93xx/include/mach/system.h
*/
-
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Set then clear the SWRST bit to initiate a software reset
- */
- ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
- ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-
- while (1)
- ;
-}
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index a6dae6c2e3c..7b98084f0c9 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -84,6 +84,7 @@ MACHINE_START(MICRO9, "Contec Micro9-High")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -96,6 +97,7 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -108,6 +110,7 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
@@ -120,5 +123,6 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 40121ba8e71..f4e553eca21 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -84,4 +84,5 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = simone_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index ec7c63ff01e..fd846331ddf 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -181,4 +181,5 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = snappercl15_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 760384e6407..79f8ecf07a1 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -251,4 +251,5 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
.handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = ts72xx_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index d96e4dbec6a..03dd4012043 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -361,4 +361,5 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = vision_init_machine,
+ .restart = ep93xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 724ec0f3560..b4bdf297e9f 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,8 @@ choice
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
help
Samsung EXYNOS4 SoCs based systems
@@ -57,6 +59,11 @@ config EXYNOS4_MCT
help
Use MCT (Multi Core Timer) as kernel timers
+config EXYNOS4_DEV_DMA
+ bool
+ help
+ Compile in amba device definitions for DMA controller
+
config EXYNOS4_DEV_AHCI
bool
help
@@ -177,6 +184,7 @@ config MACH_SMDKV310
select SAMSUNG_DEV_BACKLIGHT
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
+ select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_PD
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_SYSMMU
@@ -197,6 +205,7 @@ config MACH_ARMLEX4210
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_DEV_AHCI
+ select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_SDHCI
help
@@ -222,6 +231,7 @@ config MACH_UNIVERSAL_C210
select S5P_DEV_MFC
select S5P_DEV_ONENAND
select S5P_DEV_TV
+ select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_PD
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
@@ -255,6 +265,7 @@ config MACH_NURI
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_SETUP_MIPIPHY
+ select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_PD
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
@@ -287,6 +298,7 @@ config MACH_ORIGEN
select S5P_DEV_USB_EHCI
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
+ select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_PD
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
@@ -327,6 +339,20 @@ config MACH_SMDK4412
Machine support for Samsung SMDK4412
endif
+comment "Flattened Device Tree based board for Exynos4 based SoC"
+
+config MACH_EXYNOS4_DT
+ bool "Samsung Exynos4 Machine using device tree"
+ select CPU_EXYNOS4210
+ select USE_OF
+ select ARM_AMBA
+ select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
+ help
+ Machine support for Samsung Exynos4 machine with device tree enabled.
+ Select this if a fdt blob is available for the Exynos4 SoC based board.
+ Note: This is under development and not all peripherals can be supported
+ with this machine file.
+
if ARCH_EXYNOS4
comment "Configuration for HSMMC 8-bit bus width"
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 59069a35e40..ca85a99c159 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -10,15 +10,17 @@ obj-m :=
obj-n :=
obj- :=
-# Core support for EXYNOS4 system
+# Core
-obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
-obj-$(CONFIG_ARCH_EXYNOS4) += irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4) += common.o clock.o
obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
+
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-$(CONFIG_ARCH_EXYNOS4) += pmu.o
+
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_EXYNOS4_MCT) += mct.o
@@ -37,6 +39,8 @@ obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
+obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
+
# device support
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
@@ -44,7 +48,9 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
+obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o
+obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
@@ -55,6 +61,5 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o
obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index b9d5ef670eb..a5823a7f249 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -23,7 +23,6 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/hardware.h>
@@ -31,6 +30,8 @@
#include <mach/regs-clock.h>
#include <mach/exynos4-clock.h>
+#include "common.h"
+
static struct sleep_save exynos4210_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD1),
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 77d5decb34f..26a668b0d10 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -23,7 +23,6 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/hardware.h>
@@ -31,6 +30,8 @@
#include <mach/regs-clock.h>
#include <mach/exynos4-clock.h>
+#include "common.h"
+
static struct sleep_save exynos4212_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKDIV_IMAGE),
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 2894f0adef5..5d5250df33f 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -21,7 +21,6 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
#include <plat/pm.h>
#include <mach/map.h>
@@ -29,6 +28,8 @@
#include <mach/sysmmu.h>
#include <mach/exynos4-clock.h>
+#include "common.h"
+
static struct sleep_save exynos4_clock_save[] = {
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
@@ -553,16 +554,6 @@ static struct clk init_clocks_off[] = {
.enable = exynos4_clk_dac_ctrl,
.ctrlbit = (1 << 0),
}, {
- .name = "dma",
- .devname = "dma-pl330.0",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "dma",
- .devname = "dma-pl330.1",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 1),
- }, {
.name = "adc",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 15),
@@ -778,6 +769,20 @@ static struct clk init_clocks[] = {
}
};
+static struct clk clk_pdma0 = {
+ .name = "dma",
+ .devname = "dma-pl330.0",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+};
+
+static struct clk clk_pdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.1",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 1),
+};
+
struct clk *clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
@@ -1009,46 +1014,6 @@ static struct clksrc_clk clk_dout_mmc4 = {
static struct clksrc_clk clksrcs[] = {
{
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.0",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.1",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.2",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.3",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
- }, {
.clk = {
.name = "sclk_pwm",
.enable = exynos4_clksrc_mask_peril0_ctrl,
@@ -1192,42 +1157,6 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 },
}, {
.clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_dout_mmc0.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 0),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_dout_mmc1.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 4),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_dout_mmc2.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 8),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.3",
- .parent = &clk_dout_mmc3.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 12),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
- }, {
- .clk = {
.name = "sclk_dwmmc",
.parent = &clk_dout_mmc4.clk,
.enable = exynos4_clksrc_mask_fsys_ctrl,
@@ -1237,6 +1166,98 @@ static struct clksrc_clk clksrcs[] = {
}
};
+static struct clksrc_clk clk_sclk_uart0 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.0",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart1 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.1",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart2 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.2",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart3 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.3",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_dout_mmc0.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_dout_mmc1.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_dout_mmc2.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk clk_sclk_mmc3 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &clk_dout_mmc3.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+};
+
/* Clock initialization code */
static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
@@ -1271,6 +1292,35 @@ static struct clksrc_clk *sysclks[] = {
&clk_mout_mfc1,
};
+static struct clk *clk_cdev[] = {
+ &clk_pdma0,
+ &clk_pdma1,
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uart0,
+ &clk_sclk_uart1,
+ &clk_sclk_uart2,
+ &clk_sclk_uart3,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2,
+ &clk_sclk_mmc3,
+};
+
+static struct clk_lookup exynos4_clk_lookup[] = {
+ CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &clk_sclk_uart0.clk),
+ CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &clk_sclk_uart1.clk),
+ CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &clk_sclk_uart2.clk),
+ CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &clk_sclk_uart3.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+ CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
+};
+
static int xtal_rate;
static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
@@ -1478,11 +1528,19 @@ void __init exynos4_register_clocks(void)
for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
s3c_register_clksrc(sclk_tv[ptr], 1);
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
+ s3c_disable_clocks(clk_cdev[ptr], 1);
+
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
register_syscore_ops(&exynos4_clock_syscore_ops);
s3c24xx_register_clock(&dummy_apb_pclk);
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
new file mode 100644
index 00000000000..b4beb7e2b5b
--- /dev/null
+++ b/arch/arm/mach-exynos/common.c
@@ -0,0 +1,698 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Codes for EXYNOS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/serial_core.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+
+#include <asm/proc-fns.h>
+#include <asm/exception.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-pmu.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/adc-core.h>
+#include <plat/fb-core.h>
+#include <plat/fimc-core.h>
+#include <plat/iic-core.h>
+#include <plat/tv-core.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = EXYNOS4210_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos4210,
+ }, {
+ .idcode = EXYNOS4212_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos4212,
+ }, {
+ .idcode = EXYNOS4412_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos4412,
+ },
+};
+
+/* Initial IO mappings */
+
+static struct map_desc exynos_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_PMU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_PMU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_UART),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CMU,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
+ .length = SZ_128K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_L2CC,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO1,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO2,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO3,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3),
+ .length = SZ_256,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_DMC0,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc0[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void exynos_idle(void)
+{
+ if (!need_resched())
+ cpu_do_idle();
+
+ local_irq_enable();
+}
+
+void exynos4_restart(char mode, const char *cmd)
+{
+ __raw_writel(0x1, S5P_SWRESET);
+}
+
+/*
+ * exynos_map_io
+ *
+ * register the standard cpu IO areas
+ */
+
+void __init exynos_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialize the io descriptors we need for initialization */
+ iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P_VA_CHIPID);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init exynos4_map_io(void)
+{
+ iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+
+ if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+ iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+ else
+ iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
+ /* initialize device information early */
+ exynos4_default_sdhci0();
+ exynos4_default_sdhci1();
+ exynos4_default_sdhci2();
+ exynos4_default_sdhci3();
+
+ s3c_adc_setname("samsung-adc-v3");
+
+ s3c_fimc_setname(0, "exynos4-fimc");
+ s3c_fimc_setname(1, "exynos4-fimc");
+ s3c_fimc_setname(2, "exynos4-fimc");
+ s3c_fimc_setname(3, "exynos4-fimc");
+
+ /* The I2C bus controllers are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+ s3c_i2c2_setname("s3c2440-i2c");
+
+ s5p_fb_setname(0, "exynos4-fb");
+ s5p_hdmi_setname("exynos4-hdmi");
+}
+
+void __init exynos4_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+
+ if (soc_is_exynos4210())
+ exynos4210_register_clocks();
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ exynos4212_register_clocks();
+
+ exynos4_register_clocks();
+ exynos4_setup_clocks();
+}
+
+#define COMBINER_ENABLE_SET 0x0
+#define COMBINER_ENABLE_CLEAR 0x4
+#define COMBINER_INT_STATUS 0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+ unsigned int irq_offset;
+ unsigned int irq_mask;
+ void __iomem *base;
+};
+
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+ struct combiner_chip_data *combiner_data =
+ irq_data_get_irq_chip_data(data);
+
+ return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+ u32 mask = 1 << (data->irq % 32);
+
+ __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+ u32 mask = 1 << (data->irq % 32);
+
+ __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+ unsigned int cascade_irq, combiner_irq;
+ unsigned long status;
+
+ chained_irq_enter(chip, desc);
+
+ spin_lock(&irq_controller_lock);
+ status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+ spin_unlock(&irq_controller_lock);
+ status &= chip_data->irq_mask;
+
+ if (status == 0)
+ goto out;
+
+ combiner_irq = __ffs(status);
+
+ cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+ if (unlikely(cascade_irq >= NR_IRQS))
+ do_bad_IRQ(cascade_irq, desc);
+ else
+ generic_handle_irq(cascade_irq);
+
+ out:
+ chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+ .name = "COMBINER",
+ .irq_mask = combiner_mask_irq,
+ .irq_unmask = combiner_unmask_irq,
+};
+
+static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+ if (combiner_nr >= MAX_COMBINER_NR)
+ BUG();
+ if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+ BUG();
+ irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
+ unsigned int irq_start)
+{
+ unsigned int i;
+
+ if (combiner_nr >= MAX_COMBINER_NR)
+ BUG();
+
+ combiner_data[combiner_nr].base = base;
+ combiner_data[combiner_nr].irq_offset = irq_start;
+ combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+ /* Disable all interrupts */
+
+ __raw_writel(combiner_data[combiner_nr].irq_mask,
+ base + COMBINER_ENABLE_CLEAR);
+
+ /* Setup the Linux IRQ subsystem */
+
+ for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+ + MAX_IRQ_IN_COMBINER; i++) {
+ irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
+ irq_set_chip_data(i, &combiner_data[combiner_nr]);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id exynos4_dt_irq_match[] = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ {},
+};
+#endif
+
+void __init exynos4_init_irq(void)
+{
+ int irq;
+ unsigned int gic_bank_offset;
+
+ gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+ if (!of_have_populated_dt())
+ gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
+#ifdef CONFIG_OF
+ else
+ of_irq_init(exynos4_dt_irq_match);
+#endif
+
+ for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+
+ combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+ COMBINER_IRQ(irq, 0));
+ combiner_cascade_irq(irq, IRQ_SPI(irq));
+ }
+
+ /*
+ * The parameters of s5p_init_irq() are for VIC init.
+ * Theses parameters should be NULL and 0 because EXYNOS4
+ * uses GIC instead of VIC.
+ */
+ s5p_init_irq(NULL, 0);
+}
+
+struct sysdev_class exynos4_sysclass = {
+ .name = "exynos4-core",
+};
+
+static struct sys_device exynos4_sysdev = {
+ .cls = &exynos4_sysclass,
+};
+
+static int __init exynos4_core_init(void)
+{
+ return sysdev_class_register(&exynos4_sysclass);
+}
+core_initcall(exynos4_core_init);
+
+#ifdef CONFIG_CACHE_L2X0
+static int __init exynos4_l2x0_cache_init(void)
+{
+ /* TAG, Data Latency Control: 2cycle */
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+
+ if (soc_is_exynos4210())
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+ /* L2X0 Prefetch Control */
+ __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+ /* L2X0 Power Control */
+ __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
+ S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+ l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
+
+ return 0;
+}
+
+early_initcall(exynos4_l2x0_cache_init);
+#endif
+
+int __init exynos_init(void)
+{
+ printk(KERN_INFO "EXYNOS: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = exynos_idle;
+
+ return sysdev_register(&exynos4_sysdev);
+}
+
+/* uart registration process */
+
+void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
+ tcfg->has_fracval = 1;
+
+ s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no);
+}
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int exynos4_get_irq_nr(unsigned int number)
+{
+ u32 ret = 0;
+
+ switch (number) {
+ case 0 ... 3:
+ ret = (number + IRQ_EINT0);
+ break;
+ case 4 ... 7:
+ ret = (number + (IRQ_EINT4 - 4));
+ break;
+ case 8 ... 15:
+ ret = (number + (IRQ_EINT8 - 8));
+ break;
+ default:
+ printk(KERN_ERR "number available : %d\n", number);
+ }
+
+ return ret;
+}
+
+static inline void exynos4_irq_eint_mask(struct irq_data *data)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask |= eint_irq_to_bit(data->irq);
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+}
+
+static void exynos4_irq_eint_unmask(struct irq_data *data)
+{
+ u32 mask;
+
+ spin_lock(&eint_lock);
+ mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask &= ~(eint_irq_to_bit(data->irq));
+ __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+}
+
+static inline void exynos4_irq_eint_ack(struct irq_data *data)
+{
+ __raw_writel(eint_irq_to_bit(data->irq),
+ S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void exynos4_irq_eint_maskack(struct irq_data *data)
+{
+ exynos4_irq_eint_mask(data);
+ exynos4_irq_eint_ack(data);
+}
+
+static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = EINT_OFFSET(data->irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs & 0x7) * 4;
+ mask = 0x7 << shift;
+
+ spin_lock(&eint_lock);
+ ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ ctrl &= ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ spin_unlock(&eint_lock);
+
+ switch (offs) {
+ case 0 ... 7:
+ s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+ break;
+ case 8 ... 15:
+ s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+ break;
+ case 16 ... 23:
+ s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+ break;
+ case 24 ... 31:
+ s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+ break;
+ default:
+ printk(KERN_ERR "No such irq number %d", offs);
+ }
+
+ return 0;
+}
+
+static struct irq_chip exynos4_irq_eint = {
+ .name = "exynos4-eint",
+ .irq_mask = exynos4_irq_eint_mask,
+ .irq_unmask = exynos4_irq_eint_unmask,
+ .irq_mask_ack = exynos4_irq_eint_maskack,
+ .irq_ack = exynos4_irq_eint_ack,
+ .irq_set_type = exynos4_irq_eint_set_type,
+#ifdef CONFIG_PM
+ .irq_set_wake = s3c_irqext_wake,
+#endif
+};
+
+/*
+ * exynos4_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void exynos4_irq_demux_eint(unsigned int start)
+{
+ unsigned int irq;
+
+ u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+ u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+ status &= ~mask;
+ status &= 0xff;
+
+ while (status) {
+ irq = fls(status) - 1;
+ generic_handle_irq(irq + start);
+ status &= ~(1 << irq);
+ }
+}
+
+static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_get_chip(irq);
+ chained_irq_enter(chip, desc);
+ exynos4_irq_demux_eint(IRQ_EINT(16));
+ exynos4_irq_demux_eint(IRQ_EINT(24));
+ chained_irq_exit(chip, desc);
+}
+
+static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+ u32 *irq_data = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+
+ chained_irq_enter(chip, desc);
+ chip->irq_mask(&desc->irq_data);
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ generic_handle_irq(*irq_data);
+
+ chip->irq_unmask(&desc->irq_data);
+ chained_irq_exit(chip, desc);
+}
+
+int __init exynos4_init_irq_eint(void)
+{
+ int irq;
+
+ for (irq = 0 ; irq <= 31 ; irq++) {
+ irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+ handle_level_irq);
+ set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+ }
+
+ irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+
+ for (irq = 0 ; irq <= 15 ; irq++) {
+ eint0_15_data[irq] = IRQ_EINT(irq);
+
+ irq_set_handler_data(exynos4_get_irq_nr(irq),
+ &eint0_15_data[irq]);
+ irq_set_chained_handler(exynos4_get_irq_nr(irq),
+ exynos4_irq_eint0_15);
+ }
+
+ return 0;
+}
+arch_initcall(exynos4_init_irq_eint);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
new file mode 100644
index 00000000000..1ac49de0f39
--- /dev/null
+++ b/arch/arm/mach-exynos/common.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for EXYNOS machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
+#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
+
+void exynos_init_io(struct map_desc *mach_desc, int size);
+void exynos4_init_irq(void);
+
+void exynos4_register_clocks(void);
+void exynos4_setup_clocks(void);
+
+void exynos4210_register_clocks(void);
+void exynos4212_register_clocks(void);
+
+void exynos4_restart(char mode, const char *cmd);
+
+extern struct sys_timer exynos4_timer;
+
+#ifdef CONFIG_ARCH_EXYNOS
+extern int exynos_init(void);
+extern void exynos4_map_io(void);
+extern void exynos4_init_clocks(int xtal);
+extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define exynos4_init_clocks NULL
+#define exynos4_init_uarts NULL
+#define exynos4_map_io NULL
+#define exynos_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
deleted file mode 100644
index 22316cb31a8..00000000000
--- a/arch/arm/mach-exynos/cpu.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/* linux/arch/arm/mach-exynos/cpu.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/sysdev.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-#include <asm/exception.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/exynos4.h>
-#include <plat/adc-core.h>
-#include <plat/sdhci.h>
-#include <plat/fb-core.h>
-#include <plat/fimc-core.h>
-#include <plat/iic-core.h>
-#include <plat/reset.h>
-#include <plat/tv-core.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-pmu.h>
-
-extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
- unsigned int irq_start);
-extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
-
-/* Initial IO mappings */
-static struct map_desc exynos_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(EXYNOS_PA_SYSTIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_PMU,
- .pfn = __phys_to_pfn(EXYNOS_PA_PMU),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
- .pfn = __phys_to_pfn(EXYNOS_PA_COMBINER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_CPU,
- .pfn = __phys_to_pfn(EXYNOS_PA_GIC_CPU),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_DIST,
- .pfn = __phys_to_pfn(EXYNOS_PA_GIC_DIST),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_512K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CMU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
- .length = SZ_128K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
- .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
- .length = SZ_8K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_L2CC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO1,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO2,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GPIO3,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3),
- .length = SZ_256,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_DMC0,
- .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_USB_HSPHY,
- .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc0[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void exynos_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
-static void exynos4_sw_reset(void)
-{
- __raw_writel(0x1, S5P_SWRESET);
-}
-
-/*
- * exynos_map_io
- *
- * register the standard cpu IO areas
- */
-void __init exynos4_map_io(void)
-{
- iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
- iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
- if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
- iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
- else
- iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
-
- /* initialize device information early */
- exynos4_default_sdhci0();
- exynos4_default_sdhci1();
- exynos4_default_sdhci2();
- exynos4_default_sdhci3();
-
- s3c_adc_setname("samsung-adc-v3");
-
- s3c_fimc_setname(0, "exynos4-fimc");
- s3c_fimc_setname(1, "exynos4-fimc");
- s3c_fimc_setname(2, "exynos4-fimc");
- s3c_fimc_setname(3, "exynos4-fimc");
-
- /* The I2C bus controllers are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
- s3c_i2c2_setname("s3c2440-i2c");
-
- s5p_fb_setname(0, "exynos4-fb");
- s5p_hdmi_setname("exynos4-hdmi");
-}
-
-void __init exynos4_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
-
- if (soc_is_exynos4210())
- exynos4210_register_clocks();
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- exynos4212_register_clocks();
-
- exynos4_register_clocks();
- exynos4_setup_clocks();
-}
-
-void __init exynos4_init_irq(void)
-{
- int irq;
- unsigned int gic_bank_offset;
-
- gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
-
- gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
-
- for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
-
- combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
- COMBINER_IRQ(irq, 0));
- combiner_cascade_irq(irq, IRQ_SPI(irq));
- }
-
- /* The parameters of s5p_init_irq() are for VIC init.
- * Theses parameters should be NULL and 0 because EXYNOS4
- * uses GIC instead of VIC.
- */
- s5p_init_irq(NULL, 0);
-}
-
-struct sysdev_class exynos4_sysclass = {
- .name = "exynos4-core",
-};
-
-static struct sys_device exynos4_sysdev = {
- .cls = &exynos4_sysclass,
-};
-
-static int __init exynos4_core_init(void)
-{
- return sysdev_class_register(&exynos4_sysclass);
-}
-core_initcall(exynos4_core_init);
-
-#ifdef CONFIG_CACHE_L2X0
-static int __init exynos4_l2x0_cache_init(void)
-{
- /* TAG, Data Latency Control: 2cycle */
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-
- if (soc_is_exynos4210())
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-
- /* L2X0 Prefetch Control */
- __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
-
- /* L2X0 Power Control */
- __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
- S5P_VA_L2CC + L2X0_POWER_CTRL);
-
- l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
-
- return 0;
-}
-
-early_initcall(exynos4_l2x0_cache_init);
-#endif
-
-int __init exynos_init(void)
-{
- printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = exynos_idle;
-
- /* set sw_reset function */
- if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
- s5p_reset_hook = exynos4_sw_reset;
-
- return sysdev_register(&exynos4_sysdev);
-}
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 9667c61e64f..b10fcd270f0 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -24,6 +24,7 @@
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
+#include <linux/of.h>
#include <asm/irq.h>
#include <plat/devs.h>
@@ -35,95 +36,42 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-struct dma_pl330_peri pdma0_peri[28] = {
- {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ0,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ2,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART4_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART4_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS4_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS4_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_AC97_MICIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMOUT,
- .rqtype = MEMTODEV,
- },
+u8 pdma0_peri[] = {
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM2_RX,
+ DMACH_PCM2_TX,
+ DMACH_MSM_REQ0,
+ DMACH_MSM_REQ2,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART4_RX,
+ DMACH_UART4_TX,
+ DMACH_SLIMBUS0_RX,
+ DMACH_SLIMBUS0_TX,
+ DMACH_SLIMBUS2_RX,
+ DMACH_SLIMBUS2_TX,
+ DMACH_SLIMBUS4_RX,
+ DMACH_SLIMBUS4_TX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
};
struct dma_pl330_platdata exynos4_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri = pdma0_peri,
+ .peri_id = pdma0_peri,
};
struct amba_device exynos4_device_pdma0 = {
@@ -142,86 +90,37 @@ struct amba_device exynos4_device_pdma0 = {
.periphid = 0x00041330,
};
-struct dma_pl330_peri pdma1_peri[25] = {
- {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ1,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ3,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS5_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS5_TX,
- .rqtype = MEMTODEV,
- },
+u8 pdma1_peri[] = {
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM1_TX,
+ DMACH_MSM_REQ1,
+ DMACH_MSM_REQ3,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_SLIMBUS1_RX,
+ DMACH_SLIMBUS1_TX,
+ DMACH_SLIMBUS3_RX,
+ DMACH_SLIMBUS3_TX,
+ DMACH_SLIMBUS5_RX,
+ DMACH_SLIMBUS5_TX,
};
struct dma_pl330_platdata exynos4_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri = pdma1_peri,
+ .peri_id = pdma1_peri,
};
struct amba_device exynos4_device_pdma1 = {
@@ -242,7 +141,15 @@ struct amba_device exynos4_device_pdma1 = {
static int __init exynos4_dma_init(void)
{
+ if (of_have_populated_dt())
+ return 0;
+
+ dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+
+ dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
amba_device_register(&exynos4_device_pdma1, &iomem_resource);
return 0;
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index dfd4b7eecb9..713dd5251c6 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -17,13 +17,13 @@
/* PPI: Private Peripheral Interrupt */
-#define IRQ_PPI(x) S5P_IRQ(x+16)
+#define IRQ_PPI(x) (x+16)
#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
/* SPI: Shared Peripheral Interrupt */
-#define IRQ_SPI(x) S5P_IRQ(x+32)
+#define IRQ_SPI(x) (x+32)
#define IRQ_EINT0 IRQ_SPI(16)
#define IRQ_EINT1 IRQ_SPI(17)
@@ -163,7 +163,9 @@
#define IRQ_GPIO2_NR_GROUPS 9
#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
+#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
+
/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_GPIO_END + 64)
+#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 058541d45af..d1829860a0e 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -149,7 +149,6 @@
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
#define S3C_PA_UART EXYNOS4_PA_UART
-#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID
#define S5P_PA_EHCI EXYNOS4_PA_EHCI
#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1
@@ -166,26 +165,17 @@
#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA
#define S5P_PA_SDO EXYNOS4_PA_SDO
#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM
-#define S5P_PA_SROMC EXYNOS4_PA_SROMC
-#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON
-#define S5P_PA_TIMER EXYNOS4_PA_TIMER
#define S5P_PA_VP EXYNOS4_PA_VP
#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC
#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1
#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD
-#define EXYNOS_PA_COMBINER EXYNOS4_PA_COMBINER
-#define EXYNOS_PA_GIC_CPU EXYNOS4_PA_GIC_CPU
-#define EXYNOS_PA_GIC_DIST EXYNOS4_PA_GIC_DIST
-#define EXYNOS_PA_PMU EXYNOS4_PA_PMU
-#define EXYNOS_PA_SYSTIMER EXYNOS4_PA_SYSTIMER
-
/* Compatibility UART */
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART(x) (EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
#define S5P_PA_UART0 S5P_PA_UART(0)
#define S5P_PA_UART1 S5P_PA_UART(1)
#define S5P_PA_UART2 S5P_PA_UART(2)
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
index 5e3220c18fc..0063a6de3dc 100644
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ b/arch/arm/mach-exynos/include/mach/system.h
@@ -13,8 +13,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-#include <plat/system-reset.h>
-
static void arch_idle(void)
{
/* nothing here yet */
diff --git a/arch/arm/mach-exynos/init.c b/arch/arm/mach-exynos/init.c
deleted file mode 100644
index a8a83e3881a..00000000000
--- a/arch/arm/mach-exynos/init.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/mach-exynos4/init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
- [0] = {
- .name = "uclk1",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
-/* uart registration process */
-void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->has_fracval = 1;
- tcfg->clocks = exynos4_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
- }
- tcfg->flags |= NO_NEED_CHECK_CLKSRC;
- }
-
- s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-exynos/irq-combiner.c b/arch/arm/mach-exynos/irq-combiner.c
deleted file mode 100644
index 5a2758ab055..00000000000
--- a/arch/arm/mach-exynos/irq-combiner.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* linux/arch/arm/mach-exynos4/irq-combiner.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/common/gic.c
- *
- * IRQ COMBINER support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-#define COMBINER_ENABLE_SET 0x0
-#define COMBINER_ENABLE_CLEAR 0x4
-#define COMBINER_INT_STATUS 0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
- unsigned int irq_offset;
- unsigned int irq_mask;
- void __iomem *base;
-};
-
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
- struct combiner_chip_data *combiner_data =
- irq_data_get_irq_chip_data(data);
-
- return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
- u32 mask = 1 << (data->irq % 32);
-
- __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
- u32 mask = 1 << (data->irq % 32);
-
- __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
- struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
- struct irq_chip *chip = irq_get_chip(irq);
- unsigned int cascade_irq, combiner_irq;
- unsigned long status;
-
- chained_irq_enter(chip, desc);
-
- spin_lock(&irq_controller_lock);
- status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
- spin_unlock(&irq_controller_lock);
- status &= chip_data->irq_mask;
-
- if (status == 0)
- goto out;
-
- combiner_irq = __ffs(status);
-
- cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
- if (unlikely(cascade_irq >= NR_IRQS))
- do_bad_IRQ(cascade_irq, desc);
- else
- generic_handle_irq(cascade_irq);
-
- out:
- chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
- .name = "COMBINER",
- .irq_mask = combiner_mask_irq,
- .irq_unmask = combiner_unmask_irq,
-};
-
-void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
- if (combiner_nr >= MAX_COMBINER_NR)
- BUG();
- if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
- BUG();
- irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
- unsigned int irq_start)
-{
- unsigned int i;
-
- if (combiner_nr >= MAX_COMBINER_NR)
- BUG();
-
- combiner_data[combiner_nr].base = base;
- combiner_data[combiner_nr].irq_offset = irq_start;
- combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
- /* Disable all interrupts */
-
- __raw_writel(combiner_data[combiner_nr].irq_mask,
- base + COMBINER_ENABLE_CLEAR);
-
- /* Setup the Linux IRQ subsystem */
-
- for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
- + MAX_IRQ_IN_COMBINER; i++) {
- irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
- irq_set_chip_data(i, &combiner_data[combiner_nr]);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
-}
diff --git a/arch/arm/mach-exynos/irq-eint.c b/arch/arm/mach-exynos/irq-eint.c
deleted file mode 100644
index badb8c66fc9..00000000000
--- a/arch/arm/mach-exynos/irq-eint.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* linux/arch/arm/mach-exynos4/irq-eint.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-
-#include <plat/pm.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/regs-gpio.h>
-
-#include <asm/mach/irq.h>
-
-static DEFINE_SPINLOCK(eint_lock);
-
-static unsigned int eint0_15_data[16];
-
-static unsigned int exynos4_get_irq_nr(unsigned int number)
-{
- u32 ret = 0;
-
- switch (number) {
- case 0 ... 3:
- ret = (number + IRQ_EINT0);
- break;
- case 4 ... 7:
- ret = (number + (IRQ_EINT4 - 4));
- break;
- case 8 ... 15:
- ret = (number + (IRQ_EINT8 - 8));
- break;
- default:
- printk(KERN_ERR "number available : %d\n", number);
- }
-
- return ret;
-}
-
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
-{
- u32 mask;
-
- spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask |= eint_irq_to_bit(data->irq);
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-}
-
-static void exynos4_irq_eint_unmask(struct irq_data *data)
-{
- u32 mask;
-
- spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask &= ~(eint_irq_to_bit(data->irq));
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-}
-
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
-{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void exynos4_irq_eint_maskack(struct irq_data *data)
-{
- exynos4_irq_eint_mask(data);
- exynos4_irq_eint_ack(data);
-}
-
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = EINT_OFFSET(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S5P_IRQ_TYPE_EDGE_RISING;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs & 0x7) * 4;
- mask = 0x7 << shift;
-
- spin_lock(&eint_lock);
- ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
- ctrl &= ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
- spin_unlock(&eint_lock);
-
- switch (offs) {
- case 0 ... 7:
- s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
- break;
- case 8 ... 15:
- s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
- break;
- case 16 ... 23:
- s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
- break;
- case 24 ... 31:
- s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
- break;
- default:
- printk(KERN_ERR "No such irq number %d", offs);
- }
-
- return 0;
-}
-
-static struct irq_chip exynos4_irq_eint = {
- .name = "exynos4-eint",
- .irq_mask = exynos4_irq_eint_mask,
- .irq_unmask = exynos4_irq_eint_unmask,
- .irq_mask_ack = exynos4_irq_eint_maskack,
- .irq_ack = exynos4_irq_eint_ack,
- .irq_set_type = exynos4_irq_eint_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = s3c_irqext_wake,
-#endif
-};
-
-/* exynos4_irq_demux_eint
- *
- * This function demuxes the IRQ from from EINTs 16 to 31.
- * It is designed to be inlined into the specific handler
- * s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void exynos4_irq_demux_eint(unsigned int start)
-{
- unsigned int irq;
-
- u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
- u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
-
- status &= ~mask;
- status &= 0xff;
-
- while (status) {
- irq = fls(status) - 1;
- generic_handle_irq(irq + start);
- status &= ~(1 << irq);
- }
-}
-
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_get_chip(irq);
- chained_irq_enter(chip, desc);
- exynos4_irq_demux_eint(IRQ_EINT(16));
- exynos4_irq_demux_eint(IRQ_EINT(24));
- chained_irq_exit(chip, desc);
-}
-
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
-{
- u32 *irq_data = irq_get_handler_data(irq);
- struct irq_chip *chip = irq_get_chip(irq);
-
- chained_irq_enter(chip, desc);
- chip->irq_mask(&desc->irq_data);
-
- if (chip->irq_ack)
- chip->irq_ack(&desc->irq_data);
-
- generic_handle_irq(*irq_data);
-
- chip->irq_unmask(&desc->irq_data);
- chained_irq_exit(chip, desc);
-}
-
-int __init exynos4_init_irq_eint(void)
-{
- int irq;
-
- for (irq = 0 ; irq <= 31 ; irq++) {
- irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
- handle_level_irq);
- set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
- }
-
- irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
-
- for (irq = 0 ; irq <= 15 ; irq++) {
- eint0_15_data[irq] = IRQ_EINT(irq);
-
- irq_set_handler_data(exynos4_get_irq_nr(irq),
- &eint0_15_data[irq]);
- irq_set_chained_handler(exynos4_get_irq_nr(irq),
- exynos4_irq_eint0_15);
- }
-
- return 0;
-}
-
-arch_initcall(exynos4_init_irq_eint);
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index 49da3089249..d726fcd3acf 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -21,7 +21,6 @@
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/exynos4.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
@@ -29,6 +28,8 @@
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -188,7 +189,7 @@ static void __init armlex4210_smsc911x_init(void)
static void __init armlex4210_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(armlex4210_uartcfgs,
ARRAY_SIZE(armlex4210_uartcfgs));
@@ -214,4 +215,5 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
.handle_irq = gic_handle_irq,
.init_machine = armlex4210_machine_init,
.timer = &exynos4_timer,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
new file mode 100644
index 00000000000..85fa02767d6
--- /dev/null
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -0,0 +1,85 @@
+/*
+ * Samsung's Exynos4210 flattened device tree enabled machine
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ * www.linaro.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+
+/*
+ * The following lookup table is used to override device names when devices
+ * are registered from device tree. This is temporarily added to enable
+ * device tree support addition for the Exynos4 architecture.
+ *
+ * For drivers that require platform data to be provided from the machine
+ * file, a platform data pointer can also be supplied along with the
+ * devices names. Usually, the platform data elements that cannot be parsed
+ * from the device tree by the drivers (example: function pointers) are
+ * supplied. But it should be noted that this is a temporary mechanism and
+ * at some point, the drivers should be capable of parsing all the platform
+ * data from the device tree.
+ */
+static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0,
+ "exynos4210-uart.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1,
+ "exynos4210-uart.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2,
+ "exynos4210-uart.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3,
+ "exynos4210-uart.3", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
+ "exynos4-sdhci.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1),
+ "exynos4-sdhci.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2),
+ "exynos4-sdhci.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3),
+ "exynos4-sdhci.3", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
+ "s3c2440-i2c.0", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
+ {},
+};
+
+static void __init exynos4210_dt_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+}
+
+static void __init exynos4210_dt_machine_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ exynos4210_auxdata_lookup, NULL);
+}
+
+static char const *exynos4210_dt_compat[] __initdata = {
+ "samsung,exynos4210",
+ NULL
+};
+
+DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
+ /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
+ .init_irq = exynos4_init_irq,
+ .map_io = exynos4210_dt_map_io,
+ .init_machine = exynos4210_dt_machine_init,
+ .timer = &exynos4_timer,
+ .dt_compat = exynos4210_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 5acec11821a..b895ec03110 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -38,7 +38,6 @@
#include <plat/adc.h>
#include <plat/regs-fb-v4.h>
#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
@@ -55,6 +54,8 @@
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -248,13 +249,8 @@ static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
static int nuri_bl_init(struct device *dev)
{
- int ret, gpio = EXYNOS4_GPE2(3);
-
- ret = gpio_request(gpio, "LCD_LDO_EN");
- if (!ret)
- gpio_direction_output(gpio, 0);
-
- return ret;
+ return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW,
+ "LCD_LD0_EN");
}
static int nuri_bl_notify(struct device *dev, int brightness)
@@ -1284,7 +1280,7 @@ static struct platform_device *nuri_devices[] __initdata = {
static void __init nuri_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
}
@@ -1338,4 +1334,5 @@ MACHINE_START(NURI, "NURI")
.init_machine = nuri_machine_init,
.timer = &exynos4_timer,
.reserve = &nuri_reserve,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 5561b06c38e..586eb995aa9 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -29,7 +29,6 @@
#include <plat/regs-serial.h>
#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
@@ -44,6 +43,8 @@
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -639,7 +640,7 @@ static void s5p_tv_setup(void)
static void __init origen_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
}
@@ -699,4 +700,5 @@ MACHINE_START(ORIGEN, "ORIGEN")
.init_machine = origen_machine_init,
.timer = &exynos4_timer,
.reserve = &origen_reserve,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index 722d82d7f21..d00e4f016a6 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -28,7 +28,6 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/exynos4.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
#include <plat/keypad.h>
@@ -37,6 +36,8 @@
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -250,7 +251,7 @@ static void __init smdk4x12_map_io(void)
{
clk_xusbxti.rate = 24000000;
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
}
@@ -291,6 +292,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
.handle_irq = gic_handle_irq,
.init_machine = smdk4x12_machine_init,
.timer = &exynos4_timer,
+ .restart = exynos4_restart,
MACHINE_END
MACHINE_START(SMDK4412, "SMDK4412")
@@ -302,4 +304,5 @@ MACHINE_START(SMDK4412, "SMDK4412")
.handle_irq = gic_handle_irq,
.init_machine = smdk4x12_machine_init,
.timer = &exynos4_timer,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index edc60b6108e..a27b23eee9f 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -28,7 +28,6 @@
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
@@ -44,6 +43,8 @@
#include <mach/map.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -130,9 +131,7 @@ static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
gpio_free(EXYNOS4_GPD0(1));
#endif
/* fire nRESET on power up */
- gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
- gpio_direction_output(EXYNOS4_GPX0(6), 1);
+ gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
mdelay(100);
gpio_set_value(EXYNOS4_GPX0(6), 0);
@@ -333,7 +332,7 @@ static void s5p_tv_setup(void)
static void __init smdkv310_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
}
@@ -380,6 +379,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
.reserve = &smdkv310_reserve,
+ .restart = exynos4_restart,
MACHINE_END
MACHINE_START(SMDKC210, "SMDKC210")
@@ -390,4 +390,5 @@ MACHINE_START(SMDKC210, "SMDKC210")
.handle_irq = gic_handle_irq,
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index cfc7d5076f5..37ac93e8d6d 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -28,7 +28,6 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/iic.h>
@@ -48,6 +47,8 @@
#include <media/s5p_fimc.h>
#include <media/m5mols.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -609,8 +610,7 @@ static void __init universal_tsp_init(void)
/* TSP_LDO_ON: XMDMADDR_11 */
gpio = EXYNOS4_GPE2(3);
- gpio_request(gpio, "TSP_LDO_ON");
- gpio_direction_output(gpio, 1);
+ gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
gpio_export(gpio, 0);
/* TSP_INT: XMDMADDR_7 */
@@ -670,8 +670,7 @@ static void __init universal_touchkey_init(void)
i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
- gpio_request(gpio, "3_TOUCH_EN");
- gpio_direction_output(gpio, 1);
+ gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
}
static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
@@ -993,7 +992,7 @@ static struct platform_device *universal_devices[] __initdata = {
static void __init universal_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
}
@@ -1001,9 +1000,7 @@ static void __init universal_map_io(void)
void s5p_tv_setup(void)
{
/* direct HPD to HDMI chip */
- gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
-
- gpio_direction_input(EXYNOS4_GPX3(7));
+ gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
@@ -1063,4 +1060,5 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
.init_machine = universal_machine_init,
.timer = &exynos4_timer,
.reserve = &universal_reserve,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 509a435afd4..4093fea849c 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -23,6 +23,7 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/smp_scu.h>
#include <plat/cpu.h>
#include <plat/pm.h>
@@ -213,27 +214,6 @@ static int exynos4_pm_add(struct sys_device *sysdev)
return 0;
}
-/* This function copy from linux/arch/arm/kernel/smp_scu.c */
-
-void exynos4_scu_enable(void __iomem *scu_base)
-{
- u32 scu_ctrl;
-
- scu_ctrl = __raw_readl(scu_base);
- /* already enabled? */
- if (scu_ctrl & 1)
- return;
-
- scu_ctrl |= 1;
- __raw_writel(scu_ctrl, scu_base);
-
- /*
- * Ensure that the data accessed by CPU0 before the SCU was
- * initialised is visible to the other CPUs.
- */
- flush_cache_all();
-}
-
static unsigned long pll_base_rate;
static void exynos4_restore_pll(void)
@@ -402,7 +382,7 @@ static void exynos4_pm_resume(void)
exynos4_restore_pll();
- exynos4_scu_enable(S5P_VA_SCU);
+ scu_enable(S5P_VA_SCU);
#ifdef CONFIG_CACHE_L2X0
s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
diff --git a/arch/arm/mach-exynos/setup-sdhci.c b/arch/arm/mach-exynos/setup-sdhci.c
deleted file mode 100644
index 92937b41090..00000000000
--- a/arch/arm/mach-exynos/setup-sdhci.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-sdhci.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *exynos4_hsmmc_clksrcs[4] = {
- [0] = NULL,
- [1] = NULL,
- [2] = "sclk_mmc", /* mmc_bus */
- [3] = NULL,
-};
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 60b6774e1ea..25b453601ac 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -91,4 +91,5 @@ MACHINE_START(CATS, "Chalice-CATS")
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &isa_timer,
+ .restart = footbridge_restart,
MACHINE_END
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 38a44f9b9da..41978ee4f9d 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -199,6 +199,33 @@ void __init footbridge_map_io(void)
iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
}
+void footbridge_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* Jump into the ROM */
+ soft_restart(0x41000000);
+ } else {
+ /*
+ * Force the watchdog to do a CPU reset.
+ *
+ * After making sure that the watchdog is disabled
+ * (so we can change the timer registers) we first
+ * enable the timer to autoreload itself. Next, the
+ * timer interval is set really short and any
+ * current interrupt request is cleared (so we can
+ * see an edge transition). Finally, TIMER4 is
+ * enabled as the watchdog.
+ */
+ *CSR_SA110_CNTL &= ~(1 << 13);
+ *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
+ TIMER_CNTL_AUTORELOAD |
+ TIMER_CNTL_DIV16;
+ *CSR_TIMER4_LOAD = 0x2;
+ *CSR_TIMER4_CLR = 0;
+ *CSR_SA110_CNTL |= (1 << 13);
+ }
+}
+
#ifdef CONFIG_FOOTBRIDGE_ADDIN
static inline unsigned long fb_bus_sdram_offset(void)
diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h
index b05e662d21a..c9767b892cb 100644
--- a/arch/arm/mach-footbridge/common.h
+++ b/arch/arm/mach-footbridge/common.h
@@ -8,3 +8,4 @@ extern void footbridge_map_io(void);
extern void footbridge_init_irq(void);
extern void isa_init_irq(unsigned int irq);
+extern void footbridge_restart(char, const char *);
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 012210cf7d1..27716a7e5fc 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -21,5 +21,6 @@ MACHINE_START(EBSA285, "EBSA285")
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
+ .restart = footbridge_restart,
MACHINE_END
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
index 249f895910f..a174a5841bc 100644
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -7,63 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/io.h>
-#include <asm/hardware/dec21285.h>
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (mode == 's') {
- /*
- * Jump into the ROM
- */
- soft_restart(0x41000000);
- } else {
- if (machine_is_netwinder()) {
- /* open up the SuperIO chip
- */
- outb(0x87, 0x370);
- outb(0x87, 0x370);
-
- /* aux function group 1 (logical device 7)
- */
- outb(0x07, 0x370);
- outb(0x07, 0x371);
-
- /* set GP16 for WD-TIMER output
- */
- outb(0xe6, 0x370);
- outb(0x00, 0x371);
-
- /* set a RED LED and toggle WD_TIMER for rebooting
- */
- outb(0xc4, 0x338);
- } else {
- /*
- * Force the watchdog to do a CPU reset.
- *
- * After making sure that the watchdog is disabled
- * (so we can change the timer registers) we first
- * enable the timer to autoreload itself. Next, the
- * timer interval is set really short and any
- * current interrupt request is cleared (so we can
- * see an edge transition). Finally, TIMER4 is
- * enabled as the watchdog.
- */
- *CSR_SA110_CNTL &= ~(1 << 13);
- *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
- TIMER_CNTL_AUTORELOAD |
- TIMER_CNTL_DIV16;
- *CSR_TIMER4_LOAD = 0x2;
- *CSR_TIMER4_CLR = 0;
- *CSR_SA110_CNTL |= (1 << 13);
- }
- }
-}
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 0d3846f3b60..80a1c5cc907 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -645,6 +645,32 @@ fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi)
#endif
}
+static void netwinder_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* Jump into the ROM */
+ soft_restart(0x41000000);
+ } else {
+ local_irq_disable();
+ local_fiq_disable();
+
+ /* open up the SuperIO chip */
+ outb(0x87, 0x370);
+ outb(0x87, 0x370);
+
+ /* aux function group 1 (logical device 7) */
+ outb(0x07, 0x370);
+ outb(0x07, 0x371);
+
+ /* set GP16 for WD-TIMER output */
+ outb(0xe6, 0x370);
+ outb(0x00, 0x371);
+
+ /* set a RED LED and toggle WD_TIMER for rebooting */
+ outb(0xc4, 0x338);
+ }
+}
+
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
.atag_offset = 0x100,
@@ -656,4 +682,5 @@ MACHINE_START(NETWINDER, "Rebel-NetWinder")
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &isa_timer,
+ .restart = netwinder_restart,
MACHINE_END
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index f41dba39b32..e1e9990fa95 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -19,5 +19,6 @@ MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
+ .restart = footbridge_restart,
MACHINE_END
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 51d4e44ab97..f8a2f6bb548 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -242,3 +242,8 @@ void __init h720x_map_io(void)
{
iotable_init(h720x_io_desc,ARRAY_SIZE(h720x_io_desc));
}
+
+void h720x_restart(char mode, const char *cmd)
+{
+ CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
+}
diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h
index 7dd5fa604ef..2489537d33d 100644
--- a/arch/arm/mach-h720x/common.h
+++ b/arch/arm/mach-h720x/common.h
@@ -16,6 +16,7 @@
extern unsigned long h720x_gettimeoffset(void);
extern void __init h720x_init_irq(void);
extern void __init h720x_map_io(void);
+extern void h720x_restart(char, const char *);
#ifdef CONFIG_ARCH_H7202
extern struct sys_timer h7202_timer;
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 9886f19805f..5fdb20c855e 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -34,4 +34,5 @@ MACHINE_START(H7201, "Hynix GMS30C7201")
.init_irq = h720x_init_irq,
.timer = &h7201_timer,
.dma_zone_size = SZ_256M,
+ .restart = h720x_restart,
MACHINE_END
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 284a134819e..169673036c5 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -77,4 +77,5 @@ MACHINE_START(H7202, "Hynix HMS30C7202")
.timer = &h7202_timer,
.init_machine = init_eval_h7202,
.dma_zone_size = SZ_256M,
+ .restart = h720x_restart,
MACHINE_END
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
index a708d24ee46..16ac46e239a 100644
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -24,10 +24,4 @@ static void arch_idle(void)
nop();
}
-
-static __inline__ void arch_reset(char mode, const char *cmd)
-{
- CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
-}
-
#endif
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
index 7e33fc94cd1..d8e2d0be64a 100644
--- a/arch/arm/mach-highbank/core.h
+++ b/arch/arm/mach-highbank/core.h
@@ -1,5 +1,6 @@
extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
extern void highbank_clocks_init(void);
+extern void highbank_restart(char, const char *);
extern void __iomem *scu_base_addr;
#ifdef CONFIG_DEBUG_HIGHBANK_UART
extern void highbank_lluart_map_io(void);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 7266dd510f1..804c4a55f80 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -147,4 +147,5 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
.handle_irq = gic_handle_irq,
.init_machine = highbank_init,
.dt_compat = highbank_match,
+ .restart = highbank_restart,
MACHINE_END
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h
index 7e8192296ca..b1d8b5fbe37 100644
--- a/arch/arm/mach-highbank/include/mach/system.h
+++ b/arch/arm/mach-highbank/include/mach/system.h
@@ -21,6 +21,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-extern void arch_reset(char mode, const char *cmd);
-
#endif
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
index 53f0c4c5ef1..82c27230d4a 100644
--- a/arch/arm/mach-highbank/system.c
+++ b/arch/arm/mach-highbank/system.c
@@ -20,7 +20,7 @@
#include "core.h"
#include "sysregs.h"
-void arch_reset(char mode, const char *cmd)
+void highbank_restart(char mode, const char *cmd)
{
if (mode == 'h')
hignbank_set_pwr_hard_reset();
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index d0a27303edb..9d8598f29fd 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -133,7 +133,7 @@ config MACH_MX25_3DS
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-config MACH_EUKREA_CPUIMX25
+config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
select SOC_IMX25
select IMX_HAVE_PLATFORM_FLEXCAN
@@ -149,7 +149,7 @@ config MACH_EUKREA_CPUIMX25
choice
prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX25
+ depends on MACH_EUKREA_CPUIMX25SD
default MACH_EUKREA_MBIMXSD25_BASEBOARD
config MACH_EUKREA_MBIMXSD25_BASEBOARD
@@ -543,7 +543,7 @@ config MACH_MX35_3DS
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
-config MACH_EUKREA_CPUIMX35
+config MACH_EUKREA_CPUIMX35SD
bool "Support Eukrea CPUIMX35 Platform"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FLEXCAN
@@ -561,7 +561,7 @@ config MACH_EUKREA_CPUIMX35
choice
prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX35
+ depends on MACH_EUKREA_CPUIMX35SD
default MACH_EUKREA_MBIMXSD35_BASEBOARD
config MACH_EUKREA_MBIMXSD35_BASEBOARD
@@ -597,12 +597,12 @@ comment "i.MX6 family:"
config SOC_IMX6Q
bool "i.MX6 Quad support"
select ARM_GIC
- select CACHE_L2X0
select CPU_V7
select HAVE_ARM_SCU
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
+ select HAVE_SMP
select USE_OF
help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index aba73214c2a..d97f409ce98 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
# i.MX25 based machines
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
# i.MX27 based machines
@@ -57,7 +57,7 @@ obj-$(CONFIG_MACH_BUG) += mach-bug.o
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
index 8116f119517..ac8238caecb 100644
--- a/arch/arm/mach-imx/clock-imx35.c
+++ b/arch/arm/mach-imx/clock-imx35.c
@@ -507,7 +507,7 @@ static struct clk_lookup lookups[] = {
int __init mx35_clocks_init()
{
- unsigned int cgr2 = 3 << 26, cgr3 = 0;
+ unsigned int cgr2 = 3 << 26;
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
cgr2 |= 3 << 16;
@@ -521,6 +521,12 @@ int __init mx35_clocks_init()
__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
CCM_BASE + CCM_CGR1);
+ __raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+ __raw_writel(0, CCM_BASE + CCM_CGR3);
+
+ clk_enable(&iim_clk);
+ imx_print_silicon_rev("i.MX35", mx35_revision());
+ clk_disable(&iim_clk);
/*
* Check if we came up in internal boot mode. If yes, we need some
@@ -529,17 +535,11 @@ int __init mx35_clocks_init()
*/
if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
/* Additionally turn on UART1, SCC, and IIM clocks */
- cgr2 |= 3 << 16 | 3 << 4;
- cgr3 |= 3 << 2;
+ clk_enable(&iim_clk);
+ clk_enable(&uart1_clk);
+ clk_enable(&scc_clk);
}
- __raw_writel(cgr2, CCM_BASE + CCM_CGR2);
- __raw_writel(cgr3, CCM_BASE + CCM_CGR3);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX35", mx35_revision());
- clk_disable(&iim_clk);
-
#ifdef CONFIG_MXC_USE_EPIT
epit_timer_init(&epit1_clk,
MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index 039a7abb165..9273c2a24b5 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -1931,14 +1931,12 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
val |= 0x1 << BP_CLPCR_LPM;
val &= ~BM_CLPCR_VSTBY;
val &= ~BM_CLPCR_SBYOS;
- val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
break;
case STOP_POWER_OFF:
val |= 0x2 << BP_CLPCR_LPM;
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
- val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
break;
default:
return -EINVAL;
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index c71dbcc37b1..f4a63ee9e21 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -149,4 +149,5 @@ MACHINE_START(APF9328, "Armadeus APF9328")
.handle_irq = imx1_handle_irq,
.timer = &apf9328_timer,
.init_machine = apf9328_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index c9a9cf67755..e4f426a0989 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -561,4 +561,5 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
.handle_irq = imx31_handle_irq,
.timer = &armadillo5x0_timer,
.init_machine = armadillo5x0_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 313f62ddc1e..9a9897749dd 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -65,4 +65,5 @@ MACHINE_START(BUG, "BugLabs BUGBase")
.handle_irq = imx31_handle_irq,
.timer = &bug_timer,
.init_machine = bug_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index edb37305257..d085aea0870 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -318,4 +318,5 @@ MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
.handle_irq = imx27_handle_irq,
.timer = &eukrea_cpuimx27_timer,
.init_machine = eukrea_cpuimx27_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 66af2e8f7e5..8ecc872b254 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -53,12 +53,18 @@ static const struct imxi2c_platform_data
.bitrate = 100000,
};
+#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
+static int tsc2007_get_pendown_state(void)
+{
+ return !gpio_get_value(TSC2007_IRQGPIO);
+}
+
static struct tsc2007_platform_data tsc2007_info = {
.model = 2007,
.x_plate_ohms = 180,
+ .get_pendown_state = tsc2007_get_pendown_state,
};
-#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2)
static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
@@ -201,4 +207,5 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
.handle_irq = imx35_handle_irq,
.timer = &eukrea_cpuimx35_timer,
.init_machine = eukrea_cpuimx35_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index ab8fbcc472b..76a97a598b9 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -170,4 +170,5 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
.handle_irq = imx25_handle_irq,
.timer = &eukrea_cpuimx25_timer,
.init_machine = eukrea_cpuimx25_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 38eb9e45110..c2766ae02b4 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -282,4 +282,5 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
.handle_irq = imx27_handle_irq,
.timer = &visstrim_m10_timer,
.init_machine = visstrim_m10_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 7052155d055..c9d350c5dcc 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -78,4 +78,5 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
.handle_irq = imx27_handle_irq,
.timer = &mx27ipcam_timer,
.init_machine = mx27ipcam_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 8d6a63521f1..1f45b918922 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -84,4 +84,5 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
.handle_irq = imx27_handle_irq,
.timer = &mx27lite_timer,
.init_machine = mx27lite_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index bee633496f7..c2572810691 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -10,10 +10,13 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
@@ -25,6 +28,36 @@
#include <mach/common.h>
#include <mach/hardware.h>
+void imx6q_restart(char mode, const char *cmd)
+{
+ struct device_node *np;
+ void __iomem *wdog_base;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
+ wdog_base = of_iomap(np, 0);
+ if (!wdog_base)
+ goto soft;
+
+ imx_src_prepare_restart();
+
+ /* enable wdog */
+ writew_relaxed(1 << 2, wdog_base);
+ /* write twice to ensure the request will not get ignored */
+ writew_relaxed(1 << 2, wdog_base);
+
+ /* wait for reset to assert ... */
+ mdelay(500);
+
+ pr_err("Watchdog reset failed to assert reset\n");
+
+ /* delay to allow the serial port to show the message */
+ mdelay(50);
+
+soft:
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
+
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
{
@@ -105,4 +138,5 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
.timer = &imx6q_timer,
.init_machine = imx6q_init_machine,
.dt_compat = imx6q_dt_compat,
+ .restart = imx6q_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 5f37f89e40f..fc78e8071cd 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -279,4 +279,5 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
.handle_irq = imx31_handle_irq,
.timer = &kzm_timer,
.init_machine = kzm_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index fc49785e734..97046088ff1 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -147,6 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
.handle_irq = imx1_handle_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
+ .restart = mxc_restart,
MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS")
@@ -157,4 +158,5 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
.handle_irq = imx1_handle_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 25f84028d05..8d9f95514b1 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -312,4 +312,5 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
.handle_irq = imx21_handle_irq,
.timer = &mx21ads_timer,
.init_machine = mx21ads_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 88dccf12224..f26734298aa 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -270,4 +270,5 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
.handle_irq = imx25_handle_irq,
.timer = &mx25pdk_timer,
.init_machine = mx25pdk_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index ba232d79fa8..18f35816706 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -425,4 +425,5 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
.handle_irq = imx27_handle_irq,
.timer = &mx27pdk_timer,
.init_machine = mx27pdk_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 74dd5731eb6..0228d2e07fe 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -351,4 +351,5 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
.handle_irq = imx27_handle_irq,
.timer = &mx27ads_timer,
.init_machine = mx27ads_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 00bb308ce1c..89c33258639 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -770,4 +770,5 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
.timer = &mx31_3ds_timer,
.init_machine = mx31_3ds_init,
.reserve = mx31_3ds_reserve,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 9cc1a49053b..4917aab0e25 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -542,4 +542,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
.handle_irq = imx31_handle_irq,
.timer = &mx31ads_timer,
.init_machine = mx31ads_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 102ec99357c..02401bbd6d5 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -303,4 +303,5 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
.handle_irq = imx31_handle_irq,
.timer = &mx31lilly_timer,
.init_machine = mx31lilly_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 5366d2de18f..ef80751712e 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -287,4 +287,5 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
.handle_irq = imx31_handle_irq,
.timer = &mx31lite_timer,
.init_machine = mx31lite_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 93269150309..b95981dacb2 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -600,4 +600,5 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
.handle_irq = imx31_handle_irq,
.timer = &mx31moboard_timer,
.init_machine = mx31moboard_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 7a462025a0f..0af6c9c5b3f 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -224,4 +224,5 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
.handle_irq = imx35_handle_irq,
.timer = &mx35pdk_timer,
.init_machine = mx35_3ds_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 125c19643b0..8b3d3f07d89 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -274,4 +274,5 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
.handle_irq = imx27_handle_irq,
.timer = &mxt_td60_timer,
.init_machine = mxt_td60_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 26072f4b02e..d3b9c6b5edd 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -442,4 +442,5 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
.handle_irq = imx27_handle_irq,
.init_machine = pca100_init,
.timer = &pca100_timer,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index efd6b536ef6..d7e151669ed 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -696,4 +696,5 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
.handle_irq = imx31_handle_irq,
.timer = &pcm037_timer,
.init_machine = pcm037_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index a17e9c7dfca..16f126da9f8 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -357,4 +357,5 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
.handle_irq = imx27_handle_irq,
.timer = &pcm038_timer,
.init_machine = pcm038_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 7366c2ae3ea..06dc106519a 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -425,4 +425,5 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
.handle_irq = imx35_handle_irq,
.timer = &pcm043_timer,
.init_machine = pcm043_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 4ff5faf102a..260621055b6 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -273,4 +273,5 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
.handle_irq = imx31_handle_irq,
.timer = &qong_timer,
.init_machine = qong_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index bb6e5b25d8d..cb9ceae2f64 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -144,4 +144,5 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
.handle_irq = imx1_handle_irq,
.timer = &scb9328_timer,
.init_machine = scb9328_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 69092458f2d..033257e553e 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -322,4 +322,5 @@ MACHINE_START(VPR200, "VPR200")
.handle_irq = imx35_handle_irq,
.timer = &vpr200_timer,
.init_machine = vpr200_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index a8e33681b73..4bde04f99e3 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -19,6 +19,7 @@
#define SRC_SCR 0x000
#define SRC_GPR1 0x020
+#define BP_SRC_SCR_WARM_RESET_ENABLE 0
#define BP_SRC_SCR_CORE1_RST 14
#define BP_SRC_SCR_CORE1_ENABLE 22
@@ -46,11 +47,33 @@ void imx_set_cpu_jump(int cpu, void *jump_addr)
src_base + SRC_GPR1 + cpu * 8);
}
+void imx_src_prepare_restart(void)
+{
+ u32 val;
+
+ /* clear enable bits of secondary cores */
+ val = readl_relaxed(src_base + SRC_SCR);
+ val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
+ writel_relaxed(val, src_base + SRC_SCR);
+
+ /* clear persistent entry register of primary core */
+ writel_relaxed(0, src_base + SRC_GPR1);
+}
+
void __init imx_src_init(void)
{
struct device_node *np;
+ u32 val;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
src_base = of_iomap(np, 0);
WARN_ON(!src_base);
+
+ /*
+ * force warm reset sources to generate cold reset
+ * for a more reliable restart
+ */
+ val = readl_relaxed(src_base + SRC_SCR);
+ val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE);
+ writel_relaxed(val, src_base + SRC_SCR);
}
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index dfd18f3b50e..350e26636a0 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -6,6 +6,8 @@ config ARCH_INTEGRATOR_AP
bool "Support Integrator/AP and Integrator/PP2 platforms"
select CLKSRC_MMIO
select MIGHT_HAVE_PCI
+ select SERIAL_AMBA_PL010
+ select SERIAL_AMBA_PL010_CONSOLE
help
Include support for the ARM(R) Integrator/AP and
Integrator/PP2 platforms.
@@ -15,6 +17,8 @@ config ARCH_INTEGRATOR_CP
select ARCH_CINTEGRATOR
select ARM_TIMER_SP804
select PLAT_VERSATILE_CLCD
+ select SERIAL_AMBA_PL011
+ select SERIAL_AMBA_PL011_CONSOLE
help
Include support for the ARM(R) Integrator CP platform.
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
index a08f9b0299d..899561d8db2 100644
--- a/arch/arm/mach-integrator/common.h
+++ b/arch/arm/mach-integrator/common.h
@@ -1,2 +1,3 @@
void integrator_init_early(void);
void integrator_reserve(void);
+void integrator_restart(char, const char *);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 4b38e13667a..019f0ab08f6 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -29,6 +29,7 @@
#include <mach/cm.h>
#include <asm/system.h>
#include <asm/leds.h>
+#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
@@ -44,7 +45,6 @@ static struct amba_device rtc_device = {
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_RTCINT, NO_IRQ },
- .periphid = 0x00041030,
};
static struct amba_device uart0_device = {
@@ -58,7 +58,6 @@ static struct amba_device uart0_device = {
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_UARTINT0, NO_IRQ },
- .periphid = 0x0041010,
};
static struct amba_device uart1_device = {
@@ -72,7 +71,6 @@ static struct amba_device uart1_device = {
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_UARTINT1, NO_IRQ },
- .periphid = 0x0041010,
};
static struct amba_device kmi0_device = {
@@ -85,7 +83,6 @@ static struct amba_device kmi0_device = {
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_KMIINT0, NO_IRQ },
- .periphid = 0x00041050,
};
static struct amba_device kmi1_device = {
@@ -98,7 +95,6 @@ static struct amba_device kmi1_device = {
.flags = IORESOURCE_MEM,
},
.irq = { IRQ_KMIINT1, NO_IRQ },
- .periphid = 0x00041050,
};
static struct amba_device *amba_devs[] __initdata = {
@@ -157,6 +153,19 @@ static int __init integrator_init(void)
{
int i;
+ /*
+ * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
+ * hard-code them. The Integator/CP and forward have proper cell IDs.
+ * Else we leave them undefined to the bus driver can autoprobe them.
+ */
+ if (machine_is_integrator()) {
+ rtc_device.periphid = 0x00041030;
+ uart0_device.periphid = 0x00041010;
+ uart1_device.periphid = 0x00041010;
+ kmi0_device.periphid = 0x00041050;
+ kmi1_device.periphid = 0x00041050;
+ }
+
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
@@ -238,3 +247,11 @@ void __init integrator_reserve(void)
{
memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
}
+
+/*
+ * To reset, we hit the on-board reset register in the system FPGA
+ */
+void integrator_restart(char mode, const char *cmd)
+{
+ cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
+}
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
index e1551b8dab7..901514eba4a 100644
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -21,8 +21,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/cm.h>
-
static inline void arch_idle(void)
{
/*
@@ -32,13 +30,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * To reset, we hit the on-board reset register
- * in the system FPGA
- */
- cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
-}
-
#endif
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index a1769f35a86..21a1d6cbef4 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -472,4 +472,5 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
.init_irq = ap_init_irq,
.timer = &ap_timer,
.init_machine = ap_init,
+ .restart = integrator_restart,
MACHINE_END
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 5de49c33e4d..3a730d447c9 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -499,4 +499,5 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
.init_irq = intcp_init_irq,
.timer = &cp_timer,
.init_machine = intcp_init,
+ .restart = integrator_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
index 52b7fab7ef6..07e9ff7adaf 100644
--- a/arch/arm/mach-iop13xx/include/mach/iop13xx.h
+++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
@@ -10,6 +10,7 @@ void iop13xx_map_io(void);
void iop13xx_platform_init(void);
void iop13xx_add_tpmi_devices(void);
void iop13xx_init_irq(void);
+void iop13xx_restart(char, const char *);
/* CPUID CP6 R0 Page 0 */
static inline int iop13xx_cpu_id(void)
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
index d0c66ef450a..1f31ed3f8ae 100644
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -7,21 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <mach/iop13xx.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Reset the internal bus (warning both cores are reset)
- */
- write_wdtcr(IOP_WDTCR_EN_ARM);
- write_wdtcr(IOP_WDTCR_EN);
- write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
- write_wdtcr(0x1000);
-
- for(;;);
-}
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 4cf2cc477ea..abaee883358 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -96,4 +96,5 @@ MACHINE_START(IQ81340MC, "Intel IQ81340MC")
.init_irq = iop13xx_init_irq,
.timer = &iq81340mc_timer,
.init_machine = iq81340mc_init,
+ .restart = iop13xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index cd9e27499a1..690916a09dc 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -98,4 +98,5 @@ MACHINE_START(IQ81340SC, "Intel IQ81340SC")
.init_irq = iop13xx_init_irq,
.timer = &iq81340sc_timer,
.init_machine = iq81340sc_init,
+ .restart = iop13xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index a5b989728b9..daabb1fa6c2 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -606,3 +606,14 @@ static int __init iop13xx_init_adma_setup(char *str)
__setup("iop13xx_init_adma", iop13xx_init_adma_setup);
__setup("iop13xx_init_uart", iop13xx_init_uart_setup);
__setup("iop13xx_init_i2c", iop13xx_init_i2c_setup);
+
+void iop13xx_restart(char mode, const char *cmd)
+{
+ /*
+ * Reset the internal bus (warning both cores are reset)
+ */
+ write_wdtcr(IOP_WDTCR_EN_ARM);
+ write_wdtcr(IOP_WDTCR_EN);
+ write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
+ write_wdtcr(0x1000);
+}
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 4325055d4e1..24069e03fdc 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -208,4 +208,5 @@ MACHINE_START(EM7210, "Lanner EM7210")
.init_irq = iop32x_init_irq,
.timer = &em7210_timer,
.init_machine = em7210_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 0edc8802057..204e1d1cd76 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -212,4 +212,5 @@ MACHINE_START(GLANTANK, "GLAN Tank")
.init_irq = iop32x_init_irq,
.timer = &glantank_timer,
.init_machine = glantank_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
index b4f83e5973b..4a88727bca9 100644
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -7,26 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <asm/mach-types.h>
-#include <asm/hardware/iop3xx.h>
-#include <mach/n2100.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (machine_is_n2100()) {
- gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
- gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
- while (1)
- ;
- }
-
- *IOP3XX_PCSR = 0x30;
-
- /* Jump into ROM at address 0 */
- soft_restart(0);
-}
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 9e7aaccfeba..3eb642af1cd 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -318,6 +318,7 @@ MACHINE_START(IQ31244, "Intel IQ31244")
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
.init_machine = iq31244_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
/* There should have been an ep80219 machine identifier from the beginning.
@@ -332,4 +333,5 @@ MACHINE_START(EP80219, "Intel EP80219")
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
.init_machine = iq31244_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 53ea86f649d..2ec724b58a2 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -191,4 +191,5 @@ MACHINE_START(IQ80321, "Intel IQ80321")
.init_irq = iop32x_init_irq,
.timer = &iq80321_timer,
.init_machine = iq80321_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index d7269279968..6b6d5591244 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -291,6 +291,14 @@ static void n2100_power_off(void)
;
}
+static void n2100_restart(char mode, const char *cmd)
+{
+ gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
+ gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+ while (1)
+ ;
+}
+
static struct timer_list power_button_poll_timer;
@@ -332,4 +340,5 @@ MACHINE_START(N2100, "Thecus N2100")
.init_irq = iop32x_init_irq,
.timer = &n2100_timer,
.init_machine = n2100_init_machine,
+ .restart = n2100_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
index 86d1b20dd69..4f98e765397 100644
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -7,17 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <asm/hardware/iop3xx.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- *IOP3XX_PCSR = 0x30;
-
- /* Jump into ROM at address 0 */
- soft_restart(0);
-}
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 9e14ccc56f8..abce934f381 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -146,4 +146,5 @@ MACHINE_START(IQ80331, "Intel IQ80331")
.init_irq = iop33x_init_irq,
.timer = &iq80331_timer,
.init_machine = iq80331_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 09c899a2523..7513559e25b 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -146,4 +146,5 @@ MACHINE_START(IQ80332, "Intel IQ80332")
.init_irq = iop33x_init_irq,
.timer = &iq80332_timer,
.init_machine = iq80332_init_machine,
+ .restart = iop3xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 24f0fe35f4a..81c45370a4e 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -515,3 +515,7 @@ void __init ixp2000_init_irq(void)
}
}
+void ixp2000_restart(char mode, const char *cmd)
+{
+ ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
+}
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index af9994537e0..ee525416f0d 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -259,6 +259,7 @@ MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
.init_irq = ixp2000_init_irq,
.timer = &enp2611_timer,
.init_machine = enp2611_init_machine,
+ .restart = ixp2000_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h
index 42182c79ed9..bb0f8dcf9ee 100644
--- a/arch/arm/mach-ixp2000/include/mach/platform.h
+++ b/arch/arm/mach-ixp2000/include/mach/platform.h
@@ -122,6 +122,7 @@ void ixp2000_map_io(void);
void ixp2000_uart_init(void);
void ixp2000_init_irq(void);
void ixp2000_init_time(unsigned long);
+void ixp2000_restart(char, const char *);
unsigned long ixp2000_gettimeoffset(void);
struct pci_sys_data;
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
index 810df7b9398..a7fb08b2b8e 100644
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -8,40 +8,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Reset flash banking register so that we are pointing at
- * RedBoot bank.
- */
- if (machine_is_ixdp2401()) {
- ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
- ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
- | IXDP2X01_CPLD_FLASH_INTERN));
- ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
- }
-
- /*
- * On IXDP2801 we need to write this magic sequence to the CPLD
- * to cause a complete reset of the CPU and all external devices
- * and move the flash bank register back to 0.
- */
- if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
- unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
-
- reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
- ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
- ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
- }
-
- ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
-}
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index f7dfd970014..f53e911ec94 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -176,5 +176,6 @@ MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
.init_irq = ixdp2400_init_irq,
.timer = &ixdp2400_timer,
.init_machine = ixdp2x00_init_machine,
+ .restart = ixp2000_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index d33bcac1ec9..a2e7c393e74 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -291,5 +291,6 @@ MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
.init_irq = ixdp2800_init_irq,
.timer = &ixdp2800_timer,
.init_machine = ixdp2x00_init_machine,
+ .restart = ixp2000_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 61a28676b5b..7632beadabf 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -413,6 +413,35 @@ static void __init ixdp2x01_init_machine(void)
ixdp2x01_uart_init();
}
+static void ixdp2401_restart(char mode, const char *cmd)
+{
+ /*
+ * Reset flash banking register so that we are pointing at
+ * RedBoot bank.
+ */
+ ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+ ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
+ | IXDP2X01_CPLD_FLASH_INTERN));
+ ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
+
+ ixp2000_restart(mode, cmd);
+}
+
+static void ixdp280x_restart(char mode, const char *cmd)
+{
+ /*
+ * On IXDP2801 we need to write this magic sequence to the CPLD
+ * to cause a complete reset of the CPU and all external devices
+ * and move the flash bank register back to 0.
+ */
+ unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
+
+ reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
+ ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
+ ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
+
+ ixp2000_restart(mode, cmd);
+}
#ifdef CONFIG_ARCH_IXDP2401
MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
@@ -422,6 +451,7 @@ MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
+ .restart = ixdp2401_restart,
MACHINE_END
#endif
@@ -433,6 +463,7 @@ MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
+ .restart = ixdp280x_restart,
MACHINE_END
/*
@@ -446,6 +477,7 @@ MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
+ .restart = ixdp280x_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index a1bee33d183..0923bb905cc 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -444,3 +444,9 @@ void __init ixp23xx_sys_init(void)
*IXP23XX_EXP_UNIT_FUSE |= 0xf;
platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
}
+
+void ixp23xx_restart(char mode, const char *cmd)
+{
+ /* Use on-chip reset capability */
+ *IXP23XX_RESET0 |= IXP23XX_RST_ALL;
+}
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index 30dd31652e9..8f2487e1fc4 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -90,4 +90,5 @@ MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
.timer = &ixp23xx_timer,
.atag_offset = 0x100,
.init_machine = espresso_init,
+ .restart = ixp23xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h
index db9d9416e5e..50de558e722 100644
--- a/arch/arm/mach-ixp23xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp23xx/include/mach/platform.h
@@ -34,6 +34,7 @@ struct pci_sys_data;
void ixp23xx_map_io(void);
void ixp23xx_init_irq(void);
void ixp23xx_sys_init(void);
+void ixp23xx_restart(char, const char *);
int ixp23xx_pci_setup(int, struct pci_sys_data *);
void ixp23xx_pci_preinit(void);
struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
index 8920ff2dff1..277dda7334b 100644
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -7,10 +7,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
static inline void arch_idle(void)
{
#if 0
@@ -18,16 +14,3 @@ static inline void arch_idle(void)
cpu_do_idle();
#endif
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- /* First try machine specific support */
- if (machine_is_ixdp2351()) {
- *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
- (void) *IXDP2351_CPLD_RESET1_REG;
- *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
- }
-
- /* Use on-chip reset capability */
- *IXP23XX_RESET0 |= IXP23XX_RST_ALL;
-}
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index b3a57e0f341..5d5dd3e8d06 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -326,6 +326,17 @@ static void __init ixdp2351_init(void)
ixp23xx_sys_init();
}
+static void ixdp2351_restart(char mode, const char *cmd)
+{
+ /* First try machine specific support */
+
+ *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
+ (void) *IXDP2351_CPLD_RESET1_REG;
+ *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
+
+ ixp23xx_restart(mode, cmd);
+}
+
MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.map_io = ixdp2351_map_io,
@@ -333,4 +344,5 @@ MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
.timer = &ixp23xx_timer,
.atag_offset = 0x100,
.init_machine = ixdp2351_init,
+ .restart = ixdp2351_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 8f4dcbba902..377283fc658 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -177,4 +177,5 @@ MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
.timer = &ixp23xx_timer,
.atag_offset = 0x100,
.init_machine = roadrunner_init,
+ .restart = ixp23xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 37609a22c45..a7277ad470a 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -172,6 +172,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
/*
@@ -190,6 +191,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index b86a0055ab9..3841ab4146b 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -17,7 +17,6 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/serial.h>
-#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
@@ -403,18 +402,9 @@ void __init ixp4xx_sys_init(void)
/*
* sched_clock()
*/
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
-{
- u32 cyc = *IXP4XX_OSTS;
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace ixp4xx_update_sched_clock(void)
+static u32 notrace ixp4xx_read_sched_clock(void)
{
- u32 cyc = *IXP4XX_OSTS;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return *IXP4XX_OSTS;
}
/*
@@ -430,7 +420,7 @@ unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
EXPORT_SYMBOL(ixp4xx_timer_freq);
static void __init ixp4xx_clocksource_init(void)
{
- init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
+ setup_sched_clock(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq);
clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
ixp4xx_clocksource_read);
@@ -501,3 +491,23 @@ static void __init ixp4xx_clockevent_init(void)
clockevents_register_device(&clockevent_ixp4xx);
}
+
+void ixp4xx_restart(char mode, const char *cmd)
+{
+ if ( 1 && mode == 's') {
+ /* Jump into ROM at address 0 */
+ soft_restart(0);
+ } else {
+ /* Use on-chip reset capability */
+
+ /* set the "key" register to enable access to
+ * "timer" and "enable" registers
+ */
+ *IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+ /* write 0 to the timer register for an immediate reset */
+ *IXP4XX_OSWT = 0;
+
+ *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+ }
+}
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 81dfec31842..a74f86ce8bc 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -117,6 +117,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
@@ -132,6 +133,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425")
.timer = &ixp4xx_timer,
.atag_offset = 0x100,
.init_machine = coyote_init,
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 8837fbca27c..67be177b336 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -286,4 +286,5 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 2887c3578c1..6d5818285af 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -277,5 +277,6 @@ MACHINE_START(FSG, "Freecom FSG-3")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index d69d1b053bb..7ecf9b28f1c 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -104,5 +104,6 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index bf6678d1a92..c0e3d69a8ae 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -504,4 +504,5 @@ MACHINE_START(GORAMO_MLR, "MultiLink")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index aa029fc1914..a23f8939145 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -172,6 +172,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index e824c02c825..df9250bbf13 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -125,6 +125,7 @@ extern void ixp4xx_init_irq(void);
extern void ixp4xx_sys_init(void);
extern void ixp4xx_timer_init(void);
extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_restart(char, const char *);
extern void ixp4xx_pci_preinit(void);
struct pci_sys_data;
extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
index 24337d9d275..140a9bef446 100644
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -8,9 +8,6 @@
* published by the Free Software Foundation.
*
*/
-
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
/* ixp4xx does not implement the XScale PWRMODE register,
@@ -20,25 +17,3 @@ static inline void arch_idle(void)
cpu_do_idle();
#endif
}
-
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- if ( 1 && mode == 's') {
- /* Jump into ROM at address 0 */
- soft_restart(0);
- } else {
- /* Use on-chip reset capability */
-
- /* set the "key" register to enable access to
- * "timer" and "enable" registers
- */
- *IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
- /* write 0 to the timer register for an immediate reset */
- *IXP4XX_OSWT = 0;
-
- *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
- }
-}
-
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index f235f829dfa..8a38b39999f 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -261,6 +261,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index de716fa1aab..1010eb7b008 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -321,4 +321,5 @@ MACHINE_START(NAS100D, "Iomega NAS 100d")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index ac81ccb26bf..aa355c360d5 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -307,4 +307,5 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 3b6a81a696f..0940869fcfd 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -246,6 +246,7 @@ MACHINE_START(DEVIXP, "Omicron DEVIXP")
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
@@ -259,6 +260,7 @@ MACHINE_START(MICCPT, "Omicron MICCPT")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
@@ -269,5 +271,6 @@ MACHINE_START(MIC256, "Omicron MIC256")
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = omixp_init,
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 27e469ef452..9dec2068329 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -244,4 +244,5 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index b14144b967a..5ac0f0a0fd8 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -105,5 +105,6 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
#endif
+ .restart = ixp4xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index f3248cfbe51..0bff4a91623 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -534,3 +534,19 @@ static int __init kirkwood_clock_gate(void)
return 0;
}
late_initcall(kirkwood_clock_gate);
+
+void kirkwood_restart(char mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index b9b0f0968a3..1529280246d 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -50,6 +50,7 @@ void kirkwood_uart1_init(void);
void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
void kirkwood_audio_init(void);
+void kirkwood_restart(char, const char *);
extern int kirkwood_tclk;
extern struct sys_timer kirkwood_timer;
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index f457e07a65f..6e1bac929ab 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -227,4 +227,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index ff4c21c1f92..d9335937959 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -103,4 +103,5 @@ MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index e4d199b2b1e..61d9a552a05 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -108,4 +108,5 @@ MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 6c40f784b51..bdaed3867d1 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -127,4 +127,5 @@ MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
index 7568e95d279..5fddde002b5 100644
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -9,28 +9,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/bridge-regs.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-
#endif
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 9a1e917352f..85f6169c248 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -169,4 +169,5 @@ MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 8849bcc7328..e6bba01bae3 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -264,6 +264,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -275,6 +276,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -286,5 +288,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 1ba12c4dff8..31ae8de34e9 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -405,6 +405,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -416,5 +417,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 5660ca6c3d8..01f8c899288 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -220,6 +220,7 @@ MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -232,6 +233,7 @@ MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -244,5 +246,6 @@ MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 6663869773a..fd2c9c8b683 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -85,4 +85,5 @@ MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 66b3c05e37a..ef922079348 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -121,4 +121,5 @@ MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 8b102d62e82..4ea70e5f713 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -107,7 +107,7 @@ static void __init sheevaplug_init(void)
kirkwood_init();
/* setup gpio pin select */
- if (machine_is_sheeva_esata())
+ if (machine_is_esata_sheevaplug())
kirkwood_mpp_conf(sheeva_esata_mpp_config);
else
kirkwood_mpp_conf(sheevaplug_mpp_config);
@@ -123,11 +123,11 @@ static void __init sheevaplug_init(void)
kirkwood_ge00_init(&sheevaplug_ge00_data);
/* honor lower power consumption for plugs with out eSATA */
- if (machine_is_sheeva_esata())
+ if (machine_is_esata_sheevaplug())
kirkwood_sata_init(&sheeva_esata_sata_data);
/* enable sd wp and sd cd on plugs with esata */
- if (machine_is_sheeva_esata())
+ if (machine_is_esata_sheevaplug())
kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
else
kirkwood_sdio_init(&sheevaplug_mvsdio_data);
@@ -144,6 +144,7 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
@@ -155,5 +156,6 @@ MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index ea104fb5ec3..966b2b3bb81 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -207,4 +207,5 @@ MACHINE_START(T5325, "HP t5325 Thin Client")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 262c034836d..73e2b6ca956 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -138,4 +138,5 @@ MACHINE_START(TS219, "QNAP TS-119/TS-219")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index b68f5b4a9ec..5bbca268044 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -182,4 +182,5 @@ MACHINE_START(TS41X, "QNAP TS-41x")
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
+ .restart = kirkwood_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index a91f99d265a..255502ddd87 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -228,4 +228,5 @@ MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
.init_irq = ks8695_init_irq,
.init_machine = acs5k_init,
.timer = &ks8695_timer,
+ .restart = ks8695_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index d24bcef2e2d..e0d36cef2c5 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -126,4 +126,5 @@ MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
.init_irq = ks8695_init_irq,
.init_machine = dsm320_init,
.timer = &ks8695_timer,
+ .restart = ks8695_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 16c95657f8f..a8270725b76 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -58,4 +58,5 @@ MACHINE_START(KS8695, "KS8695 Centaur Development Board")
.init_irq = ks8695_init_irq,
.init_machine = micrel_init,
.timer = &ks8695_timer,
+ .restart = ks8695_restart,
MACHINE_END
diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h
index 2fbfab8d5fa..f8bdb11a9c3 100644
--- a/arch/arm/mach-ks8695/generic.h
+++ b/arch/arm/mach-ks8695/generic.h
@@ -12,4 +12,5 @@
extern __init void ks8695_map_io(void);
extern __init void ks8695_init_irq(void);
+extern void ks8695_restart(char, const char *);
extern struct sys_timer ks8695_timer;
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
index ceb19c90aa5..59fe992395b 100644
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -14,9 +14,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/regs-timer.h>
-
static void arch_idle(void)
{
/*
@@ -27,22 +24,4 @@ static void arch_idle(void)
}
-static void arch_reset(char mode, const char *cmd)
-{
- unsigned int reg;
-
- if (mode == 's')
- soft_restart(0);
-
- /* disable timer0 */
- reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
- __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-
- /* enable watchdog mode */
- __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
-
- /* re-enable timer0 */
- __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-}
-
#endif
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 69c072c2c0f..37dfcd5bd2a 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -109,3 +109,21 @@ struct sys_timer ks8695_timer = {
.offset = ks8695_gettimeoffset,
.resume = ks8695_timer_setup,
};
+
+void ks8695_restart(char mode, const char *cmd)
+{
+ unsigned int reg;
+
+ if (mode == 's')
+ soft_restart(0);
+
+ /* disable timer0 */
+ reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+ __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+ /* enable watchdog mode */
+ __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+ /* re-enable timer0 */
+ __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+}
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 205b2dbb565..369b152896c 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -164,7 +164,7 @@ int clk_is_sysclk_mainosc(void)
/*
* System reset via the watchdog timer
*/
-void lpc32xx_watchdog_reset(void)
+static void lpc32xx_watchdog_reset(void)
{
/* Make sure WDT clocks are enabled */
__raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
@@ -311,3 +311,21 @@ void __init lpc32xx_map_io(void)
{
iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
}
+
+void lpc23xx_restart(char mode, const char *cmd)
+{
+ switch (mode) {
+ case 's':
+ case 'h':
+ lpc32xx_watchdog_reset();
+ break;
+
+ default:
+ /* Do nothing */
+ break;
+ }
+
+ /* Wait for watchdog to reset system */
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 5583f52662b..4b4e700343c 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -39,6 +39,8 @@ extern void __init lpc32xx_init_irq(void);
extern void __init lpc32xx_map_io(void);
extern void __init lpc32xx_serial_init(void);
extern void __init lpc32xx_gpio_init(void);
+extern void lpc23xx_restart(char, const char *);
+
/*
* Structure used for setting up and querying the PLLS
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
index d47f3b1c24b..bf176c99152 100644
--- a/arch/arm/mach-lpc32xx/include/mach/system.h
+++ b/arch/arm/mach-lpc32xx/include/mach/system.h
@@ -24,26 +24,4 @@ static void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- extern void lpc32xx_watchdog_reset(void);
-
- switch (mode) {
- case 's':
- case 'h':
- printk(KERN_CRIT "RESET: Rebooting system\n");
-
- lpc32xx_watchdog_reset();
- break;
-
- default:
- /* Do nothing */
- break;
- }
-
- /* Wait for watchdog to reset system */
- while (1)
- ;
-}
-
#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 6d2f0d1b937..ecb94114c81 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -388,4 +388,5 @@ MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
.init_irq = lpc32xx_init_irq,
.timer = &lpc32xx_timer,
.init_machine = phy3250_board_init,
+ .restart = lpc23xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 7a60bbbce7a..3e6dfab59ef 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -243,6 +243,7 @@ MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
+ .restart = pxa168_restart,
MACHINE_END
MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
@@ -251,4 +252,5 @@ MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = common_init,
+ .restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 39f0878d64a..8de3dc6131a 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -45,4 +45,5 @@ MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = avengers_lite_init,
+ .restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 983cfb15fbd..e16f04b39b1 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -219,4 +219,5 @@ MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = brownstone_init,
+ .restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index 5720674739f..062b5b93c50 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -45,3 +45,8 @@ void __init mmp_map_io(void)
/* this is early, initialize mmp_chip_id here */
mmp_chip_id = __raw_readl(MMP_CHIPID);
}
+
+void mmp_restart(char mode, const char *cmd)
+{
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index ec8d65ded25..1c9d6c1ea97 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -6,3 +6,4 @@ extern void timer_init(int irq);
extern void __init icu_init_irq(void);
extern void __init mmp_map_io(void);
+extern void mmp_restart(char, const char *);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index c4fd806b15b..5a6a27a6cfd 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -121,4 +121,5 @@ MACHINE_START(FLINT, "Flint Development Platform")
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = flint_init,
+ .restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 4665767a4f7..1e3abbe37ca 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -194,4 +194,5 @@ MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = gplugd_init,
+ .restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 7fb568d2845..a677aa732c2 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -5,6 +5,7 @@ struct sys_timer;
extern struct sys_timer pxa168_timer;
extern void __init pxa168_init_irq(void);
+extern void pxa168_restart(char, const char *);
extern void pxa168_clear_keypad_wakeup(void);
#include <linux/i2c.h>
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
index cb0637933a8..1d001eab81e 100644
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -9,18 +9,8 @@
#ifndef __ASM_MACH_SYSTEM_H
#define __ASM_MACH_SYSTEM_H
-#include <mach/cputype.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (cpu_is_pxa168())
- soft_restart(0xffff0000);
- else
- soft_restart(0);
-}
#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 8bfac661262..96cf5c8fe47 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -175,4 +175,5 @@ MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
.init_irq = mmp2_init_irq,
.timer = &mmp2_timer,
.init_machine = jasper_init,
+ .restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 76ca15c00e4..13f23867a86 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -214,3 +214,8 @@ int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
pxa168_device_usb_host.dev.platform_data = pdata;
return platform_device_register(&pxa168_device_usb_host);
}
+
+void pxa168_restart(char mode, const char *cmd)
+{
+ soft_restart(0xffff0000);
+}
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index eb5be879fd8..257a21283ec 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -103,4 +103,5 @@ MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = tavorevb_init,
+ .restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index bbe4727b96c..8ac22a62bf1 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -86,4 +86,5 @@ MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
.init_irq = pxa168_init_irq,
.timer = &pxa168_timer,
.init_machine = teton_bga_init,
+ .restart = pxa168_restart,
MACHINE_END
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 4e91ee6e27c..71fc4ee4602 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -25,7 +25,6 @@
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/sched.h>
#include <asm/sched_clock.h>
#include <mach/addr-map.h>
@@ -42,8 +41,6 @@
#define MAX_DELTA (0xfffffffe)
#define MIN_DELTA (16)
-static DEFINE_CLOCK_DATA(cd);
-
/*
* FIXME: the timer needs some delay to stablize the counter capture
*/
@@ -59,16 +56,9 @@ static inline uint32_t timer_read(void)
return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
}
-unsigned long long notrace sched_clock(void)
+static u32 notrace mmp_read_sched_clock(void)
{
- u32 cyc = timer_read();
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace mmp_update_sched_clock(void)
-{
- u32 cyc = timer_read();
- update_sched_clock(&cd, cyc, (u32)~0);
+ return timer_read();
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
@@ -201,7 +191,7 @@ void __init timer_init(int irq)
{
timer_config();
- init_sched_clock(&cd, mmp_update_sched_clock, 32, CLOCK_TICK_RATE);
+ setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 176515a7698..f0265882557 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -159,4 +159,5 @@ MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
.init_irq = pxa910_init_irq,
.timer = &pxa910_timer,
.init_machine = ttc_dkb_init,
+ .restart = mmp_restart,
MACHINE_END
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index ebde97f5d5f..1cd40ad301d 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -13,7 +13,6 @@ config ARCH_MSM7X00A
select CPU_V6
select GPIO_MSM_V1
select MSM_PROC_COMM
- select HAS_MSM_DEBUG_UART_PHYS
config ARCH_MSM7X30
bool "MSM7x30"
@@ -25,7 +24,6 @@ config ARCH_MSM7X30
select MSM_GPIOMUX
select GPIO_MSM_V1
select MSM_PROC_COMM
- select HAS_MSM_DEBUG_UART_PHYS
config ARCH_QSD8X50
bool "QSD8X50"
@@ -37,7 +35,6 @@ config ARCH_QSD8X50
select MSM_GPIOMUX
select GPIO_MSM_V1
select MSM_PROC_COMM
- select HAS_MSM_DEBUG_UART_PHYS
config ARCH_MSM8X60
bool "MSM8X60"
@@ -63,19 +60,20 @@ config ARCH_MSM8960
endchoice
+config MSM_HAS_DEBUG_UART_HS
+ bool
+
config MSM_SOC_REV_A
bool
config ARCH_MSM_SCORPIONMP
bool
+ select HAVE_SMP
config ARCH_MSM_ARM11
bool
config ARCH_MSM_SCORPION
bool
-config HAS_MSM_DEBUG_UART_PHYS
- bool
-
config MSM_VIC
bool
@@ -152,32 +150,6 @@ config MACH_MSM8960_RUMI3
endmenu
-config MSM_DEBUG_UART
- int
- default 1 if MSM_DEBUG_UART1
- default 2 if MSM_DEBUG_UART2
- default 3 if MSM_DEBUG_UART3
-
-if HAS_MSM_DEBUG_UART_PHYS
-choice
- prompt "Debug UART"
-
- default MSM_DEBUG_UART_NONE
-
- config MSM_DEBUG_UART_NONE
- bool "None"
-
- config MSM_DEBUG_UART1
- bool "UART1"
-
- config MSM_DEBUG_UART2
- bool "UART2"
-
- config MSM_DEBUG_UART3
- bool "UART3"
-endchoice
-endif
-
config MSM_SMD_PKG3
bool
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 2dc73ccddb1..3ffd8668c9a 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -1,6 +1,7 @@
-/* arch/arm/mach-msm7200/include/mach/debug-macro.S
+/*
*
* Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
@@ -14,40 +15,52 @@
*
*/
-
-
#include <mach/hardware.h>
#include <mach/msm_iomap.h>
-#if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
.macro addruart, rp, rv, tmp
+#ifdef MSM_DEBUG_UART_PHYS
ldr \rp, =MSM_DEBUG_UART_PHYS
ldr \rv, =MSM_DEBUG_UART_BASE
+#endif
.endm
- .macro senduart,rd,rx
+ .macro senduart, rd, rx
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+ @ Write the 1 character to UARTDM_TF
+ str \rd, [\rx, #0x70]
+#else
teq \rx, #0
strne \rd, [\rx, #0x0C]
+#endif
.endm
- .macro waituart,rd,rx
+ .macro waituart, rd, rx
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+ @ check for TX_EMT in UARTDM_SR
+ ldr \rd, [\rx, #0x08]
+ tst \rd, #0x08
+ bne 1002f
+ @ wait for TXREADY in UARTDM_ISR
+1001: ldr \rd, [\rx, #0x14]
+ tst \rd, #0x80
+ beq 1001b
+1002:
+ @ Clear TX_READY by writing to the UARTDM_CR register
+ mov \rd, #0x300
+ str \rd, [\rx, #0x10]
+ @ Write 0x1 to NCF register
+ mov \rd, #0x1
+ str \rd, [\rx, #0x40]
+ @ UARTDM reg. Read to induce delay
+ ldr \rd, [\rx, #0x08]
+#else
@ wait for TX_READY
1001: ldr \rd, [\rx, #0x08]
tst \rd, #0x04
beq 1001b
- .endm
-#else
- .macro addruart, rp, rv, tmp
- mov \rv, #0xff000000
- orr \rv, \rv, #0x00f00000
- .endm
-
- .macro senduart,rd,rx
- .endm
-
- .macro waituart,rd,rx
- .endm
#endif
+ .endm
- .macro busyuart,rd,rx
+ .macro busyuart, rd, rx
.endm
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
index 94fe9fe6feb..8af46123dab 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
@@ -78,18 +78,6 @@
#define MSM_UART3_PHYS 0xA9C00000
#define MSM_UART3_SIZE SZ_4K
-#ifdef CONFIG_MSM_DEBUG_UART
-#define MSM_DEBUG_UART_BASE 0xE1000000
-#if CONFIG_MSM_DEBUG_UART == 1
-#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 2
-#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 3
-#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
-#endif
-#define MSM_DEBUG_UART_SIZE SZ_4K
-#endif
-
#define MSM_SDC1_PHYS 0xA0400000
#define MSM_SDC1_SIZE SZ_4K
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
index 37694442d1b..198202c267c 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
@@ -89,18 +89,6 @@
#define MSM_UART3_PHYS 0xACC00000
#define MSM_UART3_SIZE SZ_4K
-#ifdef CONFIG_MSM_DEBUG_UART
-#define MSM_DEBUG_UART_BASE 0xE1000000
-#if CONFIG_MSM_DEBUG_UART == 1
-#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 2
-#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 3
-#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
-#endif
-#define MSM_DEBUG_UART_SIZE SZ_4K
-#endif
-
#define MSM_MDC_BASE IOMEM(0xE0200000)
#define MSM_MDC_PHYS 0xAA500000
#define MSM_MDC_SIZE SZ_1M
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
index 3c9d9602a31..800b55767e6 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
@@ -45,4 +45,9 @@
#define MSM8960_TMR0_PHYS 0x0208A000
#define MSM8960_TMR0_SIZE SZ_4K
+#ifdef CONFIG_DEBUG_MSM8960_UART
+#define MSM_DEBUG_UART_BASE 0xE1040000
+#define MSM_DEBUG_UART_PHYS 0x16440000
+#endif
+
#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
index d67cd73316f..0faa894729b 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
@@ -83,18 +83,6 @@
#define MSM_UART3_PHYS 0xA9C00000
#define MSM_UART3_SIZE SZ_4K
-#ifdef CONFIG_MSM_DEBUG_UART
-#define MSM_DEBUG_UART_BASE 0xE1000000
-#if CONFIG_MSM_DEBUG_UART == 1
-#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 2
-#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 3
-#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
-#endif
-#define MSM_DEBUG_UART_SIZE SZ_4K
-#endif
-
#define MSM_MDC_BASE IOMEM(0xE0200000)
#define MSM_MDC_PHYS 0xAA500000
#define MSM_MDC_SIZE SZ_1M
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
index 3b19b8f244b..54e12caa8d8 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -62,4 +62,9 @@
#define MSM8X60_TMR0_PHYS 0x02040000
#define MSM8X60_TMR0_SIZE SZ_4K
+#ifdef CONFIG_DEBUG_MSM8660_UART
+#define MSM_DEBUG_UART_BASE 0xE1040000
+#define MSM_DEBUG_UART_PHYS 0x19C40000
+#endif
+
#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index 4ded15238b6..90682f4599d 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -55,6 +55,18 @@
#include "msm_iomap-8960.h"
+#define MSM_DEBUG_UART_SIZE SZ_4K
+#if defined(CONFIG_DEBUG_MSM_UART1)
+#define MSM_DEBUG_UART_BASE 0xE1000000
+#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS
+#elif defined(CONFIG_DEBUG_MSM_UART2)
+#define MSM_DEBUG_UART_BASE 0xE1000000
+#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS
+#elif defined(CONFIG_DEBUG_MSM_UART3)
+#define MSM_DEBUG_UART_BASE 0xE1000000
+#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
+#endif
+
/* Virtual addresses shared across all MSM targets. */
#define MSM_CSR_BASE IOMEM(0xE0001000)
#define MSM_QGIC_DIST_BASE IOMEM(0xF0000000)
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index d2e83f42ba1..311db2b35da 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -12,16 +12,8 @@
* GNU General Public License for more details.
*
*/
-
-#include <mach/hardware.h>
-
void arch_idle(void);
-static inline void arch_reset(char mode, const char *cmd)
-{
- for (;;) ; /* depends on IPC w/ other core */
-}
-
/* low level hardware reset hook -- for example, hitting the
* PSHOLD line on the PMIC to hard reset the system
*/
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
index d94292c29d8..169a8400745 100644
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -1,6 +1,6 @@
-/* arch/arm/mach-msm/include/mach/uncompress.h
- *
+/*
* Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -14,17 +14,40 @@
*/
#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+#define __ASM_ARCH_MSM_UNCOMPRESS_H
+
+#include <asm/processor.h>
+#include <mach/msm_iomap.h>
+
+#define UART_CSR (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08))
+#define UART_TF (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x0c))
-#include "hardware.h"
-#include "linux/io.h"
-#include "mach/msm_iomap.h"
+#define UART_DM_SR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08)))
+#define UART_DM_CR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x10)))
+#define UART_DM_ISR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x14)))
+#define UART_DM_NCHAR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x40)))
+#define UART_DM_TF (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x70)))
static void putc(int c)
{
#if defined(MSM_DEBUG_UART_PHYS)
- unsigned base = MSM_DEBUG_UART_PHYS;
- while (!(readl(base + 0x08) & 0x04)) ;
- writel(c, base + 0x0c);
+#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+ /*
+ * Wait for TX_READY to be set; but skip it if we have a
+ * TX underrun.
+ */
+ if (UART_DM_SR & 0x08)
+ while (!(UART_DM_ISR & 0x80))
+ cpu_relax();
+
+ UART_DM_CR = 0x300;
+ UART_DM_NCHAR = 0x1;
+ UART_DM_TF = c;
+#else
+ while (!(UART_CSR & 0x04))
+ cpu_relax();
+ UART_TF = c;
+#endif
#endif
}
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 8759ecf7454..578b04e42de 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -47,7 +47,8 @@ static struct map_desc msm_io_desc[] __initdata = {
MSM_CHIP_DEVICE(GPIO1, MSM7X00),
MSM_CHIP_DEVICE(GPIO2, MSM7X00),
MSM_DEVICE(CLK_CTL),
-#ifdef CONFIG_MSM_DEBUG_UART
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+ defined(CONFIG_DEBUG_MSM_UART3)
MSM_DEVICE(DEBUG_UART),
#endif
#ifdef CONFIG_ARCH_MSM7X30
@@ -84,7 +85,8 @@ static struct map_desc qsd8x50_io_desc[] __initdata = {
MSM_DEVICE(SCPLL),
MSM_DEVICE(AD5),
MSM_DEVICE(MDC),
-#ifdef CONFIG_MSM_DEBUG_UART
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+ defined(CONFIG_DEBUG_MSM_UART3)
MSM_DEVICE(DEBUG_UART),
#endif
{
@@ -109,6 +111,9 @@ static struct map_desc msm8x60_io_desc[] __initdata = {
MSM_CHIP_DEVICE(TMR0, MSM8X60),
MSM_DEVICE(ACC),
MSM_DEVICE(GCC),
+#ifdef CONFIG_DEBUG_MSM8660_UART
+ MSM_DEVICE(DEBUG_UART),
+#endif
};
void __init msm_map_msm8x60_io(void)
@@ -123,6 +128,9 @@ static struct map_desc msm8960_io_desc[] __initdata = {
MSM_CHIP_DEVICE(QGIC_CPU, MSM8960),
MSM_CHIP_DEVICE(TMR, MSM8960),
MSM_CHIP_DEVICE(TMR0, MSM8960),
+#ifdef CONFIG_DEBUG_MSM8960_UART
+ MSM_DEVICE(DEBUG_UART),
+#endif
};
void __init msm_map_msm8960_io(void)
@@ -146,7 +154,8 @@ static struct map_desc msm7x30_io_desc[] __initdata = {
MSM_DEVICE(SAW),
MSM_DEVICE(GCC),
MSM_DEVICE(TCSR),
-#ifdef CONFIG_MSM_DEBUG_UART
+#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
+ defined(CONFIG_DEBUG_MSM_UART3)
MSM_DEVICE(DEBUG_UART),
#endif
{
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index fdec58aaa35..0b3e357c4c8 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -79,7 +79,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu)
ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
SCM_FLAG_COLDBOOT_CPU1);
if (ret == 0) {
- void *sc1_base_ptr;
+ void __iomem *sc1_base_ptr;
sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
if (sc1_base_ptr) {
writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 0e94268d6e6..ee74ec97c14 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -151,4 +151,5 @@ MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
.timer = &mv78xx0_timer,
+ .restart = mv78xx0_restart,
MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 23d3980ef59..5b9632b0116 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -401,3 +401,19 @@ void __init mv78xx0_init(void)
feroceon_l2_init(is_l2_writethrough());
#endif
}
+
+void mv78xx0_restart(char mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 632e63d65e7..07d5f8f6be7 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -46,6 +46,7 @@ void mv78xx0_uart1_init(void);
void mv78xx0_uart2_init(void);
void mv78xx0_uart3_init(void);
void mv78xx0_i2c_init(void);
+void mv78xx0_restart(char, const char *);
extern struct sys_timer mv78xx0_timer;
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 50b85ae2da5..4d6d48bf51e 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -99,4 +99,5 @@ MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
.timer = &mv78xx0_timer,
+ .restart = mv78xx0_restart,
MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
index 66e7ce4e90b..8c3a5387cec 100644
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -9,28 +9,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/bridge-regs.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-
#endif
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index e85222e5357..9a882706e13 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -84,4 +84,5 @@ MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
.init_early = mv78xx0_init_early,
.init_irq = mv78xx0_init_irq,
.timer = &mv78xx0_timer,
+ .restart = mv78xx0_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 1fc11034804..944025da833 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -297,4 +297,5 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
.handle_irq = imx51_handle_irq,
.timer = &mxc_timer,
.init_machine = eukrea_cpuimx51_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 52a11c1898e..9fbe923c8b0 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -335,4 +335,5 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
.handle_irq = imx51_handle_irq,
.timer = &mxc_timer,
.init_machine = eukrea_cpuimx51sd_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index fc3621d90bd..42b66e8d961 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -222,4 +222,5 @@ MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
.handle_irq = imx50_handle_irq,
.timer = &mx50_rdp_timer,
.init_machine = mx50_rdp_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 05783906db2..83eab4176ca 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -175,4 +175,5 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
.handle_irq = imx51_handle_irq,
.timer = &mx51_3ds_timer,
.init_machine = mx51_3ds_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 24994bb5214..e4b822e9f71 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -426,4 +426,5 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
.handle_irq = imx51_handle_irq,
.timer = &mx51_babbage_timer,
.init_machine = mx51_babbage_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index a9e48662cf7..3a5ed2dd885 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -182,7 +182,7 @@ static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initcon
.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
};
-void mx51_efikamx_reset(void)
+static void mx51_efikamx_restart(char mode, const char *cmd)
{
if (system_rev == 0x11)
gpio_direction_output(EFIKAMX_RESET1_1, 0);
@@ -292,4 +292,5 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
.handle_irq = imx51_handle_irq,
.timer = &mx51_efikamx_timer,
.init_machine = mx51_efikamx_init,
+ .restart = mx51_efikamx_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 38c4a3e28d3..ea5f65b0381 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -287,4 +287,5 @@ MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
.handle_irq = imx51_handle_irq,
.init_machine = efikasb_board_init,
.timer = &mx51_efikasb_timer,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 0d7f0fffb23..5f224f1c3eb 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -257,4 +257,5 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_ard_timer,
.init_machine = mx53_ard_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 64bbfcea6f3..d6ce137896d 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -175,4 +175,5 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_evk_timer,
.init_machine = mx53_evk_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 237bdecd933..fd8b524e1c5 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -317,4 +317,5 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_loco_timer,
.init_machine = mx53_loco_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index d42132a80e8..22c53c9b18a 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -164,4 +164,5 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
.handle_irq = imx53_handle_irq,
.timer = &mx53_smd_timer,
.init_machine = mx53_smd_board_init,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
index 596edd967db..e6bad17b908 100644
--- a/arch/arm/mach-mx5/imx51-dt.c
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -115,4 +115,5 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
.timer = &imx51_timer,
.init_machine = imx51_dt_init,
.dt_compat = imx51_dt_board_compat,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
index 85bfd5ff21b..05ebb3e6867 100644
--- a/arch/arm/mach-mx5/imx53-dt.c
+++ b/arch/arm/mach-mx5/imx53-dt.c
@@ -125,4 +125,5 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
.timer = &imx53_timer,
.init_machine = imx53_dt_init,
.dt_compat = imx53_dt_board_compat,
+ .restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index 635bb5d9a20..1388485414c 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -16,6 +16,7 @@ struct clk;
extern const u32 *mxs_get_ocotp(void);
extern int mxs_reset_block(void __iomem *);
extern void mxs_timer_init(struct clk *, int);
+extern void mxs_restart(char, const char *);
extern int mx23_register_gpios(void);
extern int mx23_clocks_init(void);
diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h
index 0e428239b43..e7ad1bb2942 100644
--- a/arch/arm/mach-mxs/include/mach/system.h
+++ b/arch/arm/mach-mxs/include/mach/system.h
@@ -22,6 +22,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-void arch_reset(char mode, const char *cmd);
-
#endif /* __MACH_MXS_SYSTEM_H__ */
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
index 6b00577b702..2f2758230ed 100644
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -363,4 +363,5 @@ MACHINE_START(M28EVK, "DENX M28 EVK")
.init_irq = mx28_init_irq,
.timer = &m28evk_timer,
.init_machine = m28evk_init,
+ .restart = mxs_restart,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index c325fbe4e4c..5ea1c57d260 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -184,4 +184,5 @@ MACHINE_START(MX23EVK, "Freescale MX23 EVK")
.init_irq = mx23_init_irq,
.timer = &mx23evk_timer,
.init_machine = mx23evk_init,
+ .restart = mxs_restart,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 064ec5abaa5..d0cc37fd23a 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -501,4 +501,5 @@ MACHINE_START(MX28EVK, "Freescale MX28 EVK")
.init_irq = mx28_init_irq,
.timer = &mx28evk_timer,
.init_machine = mx28evk_init,
+ .restart = mxs_restart,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
index 6834dea38c0..a626c07b871 100644
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -117,4 +117,5 @@ MACHINE_START(STMP378X, "STMP378X")
.init_irq = mx23_init_irq,
.timer = &stmp378x_dvb_timer,
.init_machine = stmp378x_dvb_init,
+ .restart = mxs_restart,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index 9a1f0e7a338..2c0862e655e 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -178,4 +178,5 @@ MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
.init_irq = mx28_init_irq,
.timer = &tx28_timer,
.init_machine = tx28_stk5v3_init,
+ .restart = mxs_restart,
MACHINE_END
diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
index cab88364e7c..b936633b768 100644
--- a/arch/arm/mach-mxs/system.c
+++ b/arch/arm/mach-mxs/system.c
@@ -42,7 +42,7 @@ static void __iomem *mxs_clkctrl_reset_addr;
/*
* Reset the system. It is called by machine_restart().
*/
-void arch_reset(char mode, const char *cmd)
+void mxs_restart(char mode, const char *cmd)
{
/* reset the chip */
__mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr);
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index 00023b5cf12..59e67979f19 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -187,3 +187,8 @@ static int __init netx_init(void)
subsys_initcall(netx_init);
+void netx_restart(char mode, const char *cmd)
+{
+ writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
+ NETX_SYSTEM_RES_CR);
+}
diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h
index ede2d35341c..9b915119b8d 100644
--- a/arch/arm/mach-netx/generic.h
+++ b/arch/arm/mach-netx/generic.h
@@ -19,6 +19,7 @@
extern void __init netx_map_io(void);
extern void __init netx_init_irq(void);
+extern void netx_restart(char, const char *);
struct sys_timer;
extern struct sys_timer netx_timer;
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
index dc7b4bc003c..b38fa36d58c 100644
--- a/arch/arm/mach-netx/include/mach/system.h
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -19,20 +19,10 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include "netx-regs.h"
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
- NETX_SYSTEM_RES_CR);
-}
-
#endif
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index ef8cf3574a0..180ea899a48 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -207,4 +207,5 @@ MACHINE_START(NXDB500, "Hilscher nxdb500")
.handle_irq = vic_handle_irq,
.timer = &netx_timer,
.init_machine = nxdb500_init,
+ .restart = netx_restart,
MACHINE_END
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 588558bdd80..58009e29b20 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -100,4 +100,5 @@ MACHINE_START(NXDKN, "Hilscher nxdkn")
.handle_irq = vic_handle_irq,
.timer = &netx_timer,
.init_machine = nxdkn_init,
+ .restart = netx_restart,
MACHINE_END
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index cfcbb503864..122e99826ef 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -184,4 +184,5 @@ MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
.handle_irq = vic_handle_irq,
.timer = &netx_timer,
.init_machine = nxeb500hmi_init,
+ .restart = netx_restart,
MACHINE_END
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index f98259c050e..7c878bf0034 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -35,6 +35,8 @@
#include <mach/nand.h>
#include <mach/fsmc.h>
+#include "cpu-8815.h"
+
/* Initial value for SRC control register: all timers use MXTAL/8 source */
#define SRC_CR_INIT_MASK 0x00007fff
#define SRC_CR_INIT_VAL 0x2aaa8000
@@ -284,4 +286,5 @@ MACHINE_START(NOMADIK, "NHK8815")
.handle_irq = vic_handle_irq,
.timer = &nomadik_timer,
.init_machine = nhk8815_platform_init,
+ .restart = cpu8815_restart,
MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index dc67717db6f..65df7b4fdd3 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -21,6 +21,7 @@
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
@@ -32,6 +33,7 @@
#include <asm/hardware/cache-l2x0.h>
#include "clock.h"
+#include "cpu-8815.h"
#define __MEM_4K_RESOURCE(x) \
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
@@ -164,3 +166,13 @@ void __init cpu8815_init_irq(void)
#endif
return;
}
+
+void cpu8815_restart(char mode, const char *cmd)
+{
+ void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+
+ /* FIXME: use egpio when implemented */
+
+ /* Write anything to Reset status register */
+ writel(1, src_rstsr);
+}
diff --git a/arch/arm/mach-nomadik/cpu-8815.h b/arch/arm/mach-nomadik/cpu-8815.h
new file mode 100644
index 00000000000..71c21e8a11d
--- /dev/null
+++ b/arch/arm/mach-nomadik/cpu-8815.h
@@ -0,0 +1,4 @@
+extern void cpu8815_map_io(void);
+extern void cpu8815_platform_init(void);
+extern void cpu8815_init_irq(void);
+extern void cpu8815_restart(char, const char *);
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
index b7897edf1f3..bcaeaf41c05 100644
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -12,9 +12,6 @@
#ifdef CONFIG_NOMADIK_8815
-extern void cpu8815_map_io(void);
-extern void cpu8815_platform_init(void);
-extern void cpu8815_init_irq(void);
extern void nmdk_timer_init(void);
#endif /* NOMADIK_8815 */
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
index 7119f688116..25e198b8976 100644
--- a/arch/arm/mach-nomadik/include/mach/system.h
+++ b/arch/arm/mach-nomadik/include/mach/system.h
@@ -20,9 +20,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
/*
@@ -32,14 +29,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
-
- /* FIXME: use egpio when implemented */
-
- /* Write anything to Reset status register */
- writel(1, src_rstsr);
-}
-
#endif
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index af7911963c0..88909cc0b25 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -386,6 +386,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
EXPORT_SYMBOL(ams_delta_latch1_write);
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index b9c4c0f933e..0b9464b4121 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -390,4 +390,5 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
.init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 7f41d7a504a..9a5fe581bc1 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -89,4 +89,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
.init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 7933b97698f..00ad6b22d60 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -456,4 +456,5 @@ MACHINE_START(OMAP_H2, "TI-H2")
.init_irq = omap1_init_irq,
.init_machine = h2_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 04be2f83ca0..4a7f2514970 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -444,4 +444,5 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
.init_irq = omap1_init_irq,
.init_machine = h3_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 46fcfeb1f11..731cc3db7ab 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -610,4 +610,5 @@ MACHINE_START(HERALD, "HTC Herald")
.init_irq = omap1_init_irq,
.init_machine = htcherald_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index f99d11de153..309369ea697 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -460,4 +460,5 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
.init_irq = omap1_init_irq,
.init_machine = innovator_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index c64342388ec..f9efc036ba9 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -259,4 +259,5 @@ MACHINE_START(NOKIA770, "Nokia 770")
.init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a409dfcc5b1..675de06557a 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -578,4 +578,5 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
.init_irq = omap1_init_irq,
.init_machine = osk_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 105292d3948..81fa27f8836 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -270,4 +270,5 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
.init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 387a9006358..81cb8217838 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -317,4 +317,5 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
.init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index df6d15e68aa..e881945ce8e 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -334,4 +334,5 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
.init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 57ecd7e0983..c000bed7627 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -352,4 +352,5 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
.init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 774ae39fd63..7bcd82ab0fd 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -416,4 +416,5 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
.init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.timer = &omap1_timer,
+ .restart = omap1_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 7721c146d8d..f83a502dc93 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -28,7 +28,6 @@
#include <linux/export.h>
#include <mach/hardware.h>
-#include <mach/system.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -221,7 +220,7 @@ void voiceblue_wdt_ping(void)
gpio_set_value(0, wdt_gpio_state);
}
-static void voiceblue_reset(char mode, const char *cmd)
+static void voiceblue_restart(char mode, const char *cmd)
{
/*
* Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
@@ -285,8 +284,6 @@ static void __init voiceblue_init(void)
* (it is connected through invertor) */
omap_writeb(0x00, OMAP_LPG1_LCR);
omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
-
- arch_reset = voiceblue_reset;
}
MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
@@ -298,4 +295,5 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
.init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
.timer = &omap1_timer,
+ .restart = voiceblue_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index 52c4eda97fa..a9a5146dd2d 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -54,6 +54,7 @@ static inline void omap16xx_map_io(void)
void omap1_init_early(void);
void omap1_init_irq(void);
+void omap1_restart(char, const char *);
extern struct sys_timer omap1_timer;
extern bool omap_32k_timer_init(void);
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index ad951ee6920..91d199b6497 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -5,10 +5,9 @@
#include <linux/io.h>
#include <mach/hardware.h>
-#include <mach/system.h>
#include <plat/prcm.h>
-void omap1_arch_reset(char mode, const char *cmd)
+void omap1_restart(char mode, const char *cmd)
{
/*
* Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
@@ -21,5 +20,3 @@ void omap1_arch_reset(char mode, const char *cmd)
omap_writew(1, ARM_RSTCT1);
}
-
-void (*arch_reset)(char, const char *) = omap1_arch_reset;
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 485a21d3100..b8faffa44f9 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -37,7 +37,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -190,30 +189,9 @@ static __init void omap_init_mpu_timer(unsigned long rate)
* ---------------------------------------------------------------------------
*/
-static DEFINE_CLOCK_DATA(cd);
-
-static inline unsigned long long notrace _omap_mpu_sched_clock(void)
-{
- u32 cyc = ~omap_mpu_timer_read(1);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-#ifndef CONFIG_OMAP_32K_TIMER
-unsigned long long notrace sched_clock(void)
-{
- return _omap_mpu_sched_clock();
-}
-#else
-static unsigned long long notrace omap_mpu_sched_clock(void)
-{
- return _omap_mpu_sched_clock();
-}
-#endif
-
-static void notrace mpu_update_sched_clock(void)
+static u32 notrace omap_mpu_read_sched_clock(void)
{
- u32 cyc = ~omap_mpu_timer_read(1);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return ~omap_mpu_timer_read(1);
}
static void __init omap_init_clocksource(unsigned long rate)
@@ -223,7 +201,7 @@ static void __init omap_init_clocksource(unsigned long rate)
"%s: can't register clocksource!\n";
omap_mpu_timer_start(1, ~0, 1);
- init_sched_clock(&cd, mpu_update_sched_clock, 32, rate);
+ setup_sched_clock(omap_mpu_read_sched_clock, 32, rate);
if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
300, 32, clocksource_mmio_readl_down))
@@ -254,30 +232,6 @@ static inline void omap_mpu_timer_init(void)
}
#endif /* CONFIG_OMAP_MPU_TIMER */
-#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER)
-static unsigned long long (*preferred_sched_clock)(void);
-
-unsigned long long notrace sched_clock(void)
-{
- if (!preferred_sched_clock)
- return 0;
-
- return preferred_sched_clock();
-}
-
-static inline void preferred_sched_clock_init(bool use_32k_sched_clock)
-{
- if (use_32k_sched_clock)
- preferred_sched_clock = omap_32k_sched_clock;
- else
- preferred_sched_clock = omap_mpu_sched_clock;
-}
-#else
-static inline void preferred_sched_clock_init(bool use_32k_sched_clcok)
-{
-}
-#endif
-
static inline int omap_32k_timer_usable(void)
{
int res = false;
@@ -299,12 +253,8 @@ static inline int omap_32k_timer_usable(void)
*/
static void __init omap1_timer_init(void)
{
- if (omap_32k_timer_usable()) {
- preferred_sched_clock_init(1);
- } else {
+ if (!omap_32k_timer_usable())
omap_mpu_timer_init();
- preferred_sched_clock_init(0);
- }
}
struct sys_timer omap1_timer = {
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5ca19d717b3..b7407154c88 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -43,8 +43,10 @@ config ARCH_OMAP4
bool "TI OMAP4"
default y
depends on ARCH_OMAP2PLUS
+ select CACHE_L2X0
select CPU_V7
select ARM_GIC
+ select HAVE_SMP
select LOCAL_TIMERS if SMP
select PL310_ERRATA_588369
select PL310_ERRATA_727915
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index d88143faca5..7370983f809 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -304,4 +304,5 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 83126368ed9..9996334cb68 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -731,4 +731,5 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 7969dd904bd..6ef350d1ae4 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -218,4 +218,5 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_sdp_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index b5d9c6fe012..5598e00ccf5 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -993,4 +993,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
.handle_irq = gic_handle_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap4_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 7e90f93263d..c3851e8de28 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -101,4 +101,5 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
.handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_crane_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 551cae8d9b8..f5a3a3f1173 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -494,4 +494,5 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
.handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_evm_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 5a66480feed..ac773829941 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -357,4 +357,5 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_apollon_init,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index b38cd7b240e..e921e3be24a 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -671,6 +671,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t35_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
@@ -682,4 +683,5 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index efc5cedb1fb..f36d694d215 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -302,4 +302,5 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3517_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index d81ea7fa75e..e873063f4fd 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -663,4 +663,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
.handle_irq = omap3_intc_handle_irq,
.init_machine = devkit8000_init,
.timer = &omap3_secure_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 63b54163b99..f8c5b2cc7c9 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -106,6 +106,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap242x_boards_compat,
+ .restart = omap_prcm_restart,
MACHINE_END
#endif
@@ -125,6 +126,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap243x_boards_compat,
+ .restart = omap_prcm_restart,
MACHINE_END
#endif
@@ -143,6 +145,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
.init_machine = omap3_init,
.timer = &omap3_timer,
.dt_compat = omap3_boards_compat,
+ .restart = omap_prcm_restart,
MACHINE_END
#endif
@@ -161,5 +164,6 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
.init_machine = omap4_init,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
+ .restart = omap_prcm_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index ec4018362e8..54af800d143 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -399,4 +399,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_h4_init,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 5949f6ae3ed..a59ace0ed56 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -675,6 +675,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
@@ -686,4 +687,5 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
.handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 13bde0e6693..2d2a61f7dcb 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -437,4 +437,5 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_ldp_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index bebd3d84365..cef2cf1c0b8 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -692,6 +692,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
@@ -703,6 +704,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
@@ -714,4 +716,5 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index c34f5658828..7ffcd2839e7 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -562,4 +562,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_beagle_init,
.timer = &omap3_secure_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index f11bc444e7b..003fe34c934 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -684,4 +684,5 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_evm_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 5fa6bad9574..4198dd017d8 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -211,6 +211,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
@@ -221,4 +222,5 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index ef315c585b7..1644b73017f 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -609,4 +609,5 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3pandora_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index b21d70a2e4a..cb089a46f62 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -457,4 +457,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_stalker_init,
.timer = &omap3_secure_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 18cd340f9b7..a0b851aafcc 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -384,4 +384,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap3_secure_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index b6f114436db..8b06c6a60d0 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -580,4 +580,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
.handle_irq = gic_handle_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 60a61ea759b..52c0cef7716 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -565,4 +565,5 @@ MACHINE_START(OVERO, "Gumstix Overo")
.handle_irq = omap3_intc_handle_irq,
.init_machine = overo_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index a79d49e3fe0..8678b386c6a 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -152,4 +152,5 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = rm680_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 4e3c0965edf..27f01f051df 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -130,4 +130,5 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = rx51_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index 5b6ad6e3ccb..ab9a7a9e9d6 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -52,6 +52,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
.init_irq = ti81xx_init_irq,
.timer = &omap3_timer,
.init_machine = ti81xx_evm_init,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(TI8148EVM, "ti8148evm")
@@ -62,4 +63,5 @@ MACHINE_START(TI8148EVM, "ti8148evm")
.init_irq = ti81xx_init_irq,
.timer = &omap3_timer,
.init_machine = ti81xx_evm_init,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 70e5b54a211..5c20bcc57f2 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -138,6 +138,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
@@ -149,4 +150,5 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
+ .restart = omap_prcm_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 4b2b416fafe..9403b2ce6c8 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -92,6 +92,7 @@ void omap3_init_early(void); /* Do not use this one */
void am35xx_init_early(void);
void ti81xx_init_early(void);
void omap4430_init_early(void);
+void omap_prcm_restart(char, const char *);
/*
* IO bases for various OMAP processors
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 7f8915ad509..eef43e2e163 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3247,18 +3247,14 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
/* 3430ES1-only hwmods */
static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
- &omap3xxx_iva_hwmod,
&omap3430es1_dss_core_hwmod,
- &omap3xxx_mailbox_hwmod,
NULL
};
/* 3430ES2+-only hwmods */
static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
- &omap3xxx_iva_hwmod,
&omap3xxx_dss_core_hwmod,
&omap3xxx_usbhsotg_hwmod,
- &omap3xxx_mailbox_hwmod,
NULL
};
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index c35e5cea9f8..626acfad719 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -25,7 +25,6 @@
#include <linux/delay.h>
#include <linux/export.h>
-#include <mach/system.h>
#include "common.h"
#include <plat/prcm.h>
#include <plat/irqs.h>
@@ -59,7 +58,7 @@ u32 omap_prcm_get_reset_sources(void)
EXPORT_SYMBOL(omap_prcm_get_reset_sources);
/* Resets clock rates and reboots the system. Only called from system.h */
-static void omap_prcm_arch_reset(char mode, const char *cmd)
+void omap_prcm_restart(char mode, const char *cmd)
{
s16 prcm_offs = 0;
@@ -110,8 +109,6 @@ static void omap_prcm_arch_reset(char mode, const char *cmd)
omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */
}
-void (*arch_reset)(char, const char *) = omap_prcm_arch_reset;
-
/**
* omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
* @reg: physical address of module IDLEST register
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 9edcd520510..6eeff0e0ae0 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -254,7 +254,6 @@ static struct omap_dm_timer clksrc;
/*
* clocksource
*/
-static DEFINE_CLOCK_DATA(cd);
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1);
@@ -268,23 +267,12 @@ static struct clocksource clocksource_gpt = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static void notrace dmtimer_update_sched_clock(void)
+static u32 notrace dmtimer_read_sched_clock(void)
{
- u32 cyc;
-
- cyc = __omap_dm_timer_read_counter(&clksrc, 1);
-
- update_sched_clock(&cd, cyc, (u32)~0);
-}
-
-unsigned long long notrace sched_clock(void)
-{
- u32 cyc = 0;
-
if (clksrc.reserved)
- cyc = __omap_dm_timer_read_counter(&clksrc, 1);
+ return __omap_dm_timer_read_counter(clksrc.io_base, 1);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+ return 0;
}
/* Setup free-running counter for clocksource */
@@ -301,7 +289,7 @@ static void __init omap2_gp_clocksource_init(int gptimer_id,
__omap_dm_timer_load_start(&clksrc,
OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
- init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
+ setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
pr_err("Could not register clocksource %s\n",
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 22ace0bf2f9..41127e80cc1 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -18,6 +18,7 @@
#include <linux/mbus.h>
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
+#include <linux/delay.h>
#include <net/dsa.h>
#include <asm/page.h>
#include <asm/setup.h>
@@ -304,6 +305,17 @@ void __init orion5x_init(void)
orion5x_wdt_init();
}
+void orion5x_restart(char mode, const char *cmd)
+{
+ /*
+ * Enable and issue soft reset
+ */
+ orion5x_setbits(RSTOUTn_MASK, (1 << 2));
+ orion5x_setbits(CPU_SOFT_RESET, 1);
+ mdelay(200);
+ orion5x_clrbits(CPU_SOFT_RESET, 1);
+}
+
/*
* Many orion-based systems have buggy bootloader implementations.
* This is a common fixup for bogus memory tags.
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 909489f4d23..37ef18de61b 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -39,6 +39,7 @@ void orion5x_spi_init(void);
void orion5x_uart0_init(void);
void orion5x_uart1_init(void);
void orion5x_xor_init(void);
+void orion5x_restart(char, const char *);
/*
* PCIe/PCI functions.
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 8c8300951f4..d75dcfa0f01 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -343,6 +343,7 @@ MACHINE_START(D2NET, "LaCie d2 Network")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
#endif
@@ -355,6 +356,7 @@ MACHINE_START(BIGDISK, "LaCie Big Disk Network")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 4b79a80d5e1..a104d5a80e1 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -364,4 +364,5 @@ MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 343f60e9639..91b0f478859 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -736,4 +736,5 @@ MACHINE_START(DNS323, "D-Link DNS-323")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index 70a4e9265f0..355e962137c 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -258,4 +258,5 @@ MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index a1d6e46ab03..825a2650cef 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -11,23 +11,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/bridge-regs.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Enable and issue soft reset
- */
- orion5x_setbits(RSTOUTn_MASK, (1 << 2));
- orion5x_setbits(CPU_SOFT_RESET, 1);
- mdelay(200);
- orion5x_clrbits(CPU_SOFT_RESET, 1);
-}
-
-
#endif
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index d3cd3f63258..47587b83284 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -386,6 +386,7 @@ MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
#endif
@@ -399,5 +400,6 @@ MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 9503fff404e..527213169db 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -140,7 +140,7 @@ static struct mv_sata_platform_data lschl_sata_data = {
static void lschl_power_off(void)
{
- arm_machine_restart('h', NULL);
+ orion5x_restart('h', NULL);
}
/*****************************************************************************
@@ -325,4 +325,5 @@ MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index ed6d772f4a2..9a8697b97dd 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -186,7 +186,7 @@ static struct mv_sata_platform_data ls_hgl_sata_data = {
static void ls_hgl_power_off(void)
{
- arm_machine_restart('h', NULL);
+ orion5x_restart('h', NULL);
}
@@ -272,4 +272,5 @@ MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 743f7f1db18..09c73659f46 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -186,7 +186,7 @@ static struct mv_sata_platform_data lsmini_sata_data = {
static void lsmini_power_off(void)
{
- arm_machine_restart('h', NULL);
+ orion5x_restart('h', NULL);
}
@@ -274,5 +274,6 @@ MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 6020e26b1c7..65faaa34de6 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -267,5 +267,6 @@ MACHINE_START(MSS2, "Maxtor Shared Storage II")
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
- .fixup = tag_fixup_mem32
+ .fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 201ae367628..c87fde4deec 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -234,5 +234,6 @@ MACHINE_START(MV2120, "HP Media Vault mv2120")
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
- .fixup = tag_fixup_mem32
+ .fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 6197c79a2ec..0180c393c71 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -426,5 +426,6 @@ MACHINE_START(NET2BIG, "LaCie 2Big Network")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index ebd6767d8e8..292038fc59f 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -175,4 +175,5 @@ MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 05db2d336b0..c44eabaabc1 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -187,4 +187,5 @@ MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index e47fa0578ae..96438b6b202 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -311,4 +311,5 @@ MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 64317251ec0..2c5fab00d20 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -128,4 +128,5 @@ MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 29f1526f7b7..632a861ef82 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -364,4 +364,5 @@ MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 31e51f9b4b6..5d640874558 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -178,7 +178,7 @@ static struct hw_pci qnap_ts209_pci __initdata = {
static int __init qnap_ts209_pci_init(void)
{
- if (machine_is_ts_x09())
+ if (machine_is_ts209())
pci_common_init(&qnap_ts209_pci);
return 0;
@@ -329,4 +329,5 @@ MACHINE_START(TS209, "QNAP TS-109/TS-209")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 0fbcc14e09d..4e6ff759cd3 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -318,4 +318,5 @@ MACHINE_START(TS409, "QNAP TS-409")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index b35e2005a34..c96f37472ed 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -627,4 +627,5 @@ MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index b8be7d8d0cf..078c03f7cd5 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -179,4 +179,5 @@ MACHINE_START(WNR854T, "Netgear WNR854T")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index faf81a03936..46a9778171c 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -267,4 +267,5 @@ MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
MACHINE_END
diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile
index c550b636348..e5ec4a8d9bc 100644
--- a/arch/arm/mach-picoxcell/Makefile
+++ b/arch/arm/mach-picoxcell/Makefile
@@ -1,3 +1,2 @@
obj-y := common.o
obj-y += time.o
-obj-y += io.o
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index ad871bd7b1a..febee47bc11 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -16,12 +16,25 @@
#include <asm/mach/arch.h>
#include <asm/hardware/vic.h>
+#include <asm/mach/map.h>
#include <mach/map.h>
#include <mach/picoxcell_soc.h>
#include "common.h"
+static struct map_desc io_map __initdata = {
+ .virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
+ .pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
+ .length = PICOXCELL_PERIPH_LENGTH,
+ .type = MT_DEVICE,
+};
+
+static void __init picoxcell_map_io(void)
+{
+ iotable_init(&io_map, 1);
+}
+
static void __init picoxcell_init_machine(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -45,7 +58,7 @@ static void __init picoxcell_init_irq(void)
DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
.map_io = picoxcell_map_io,
- .nr_irqs = ARCH_NR_IRQS,
+ .nr_irqs = NR_IRQS_LEGACY,
.init_irq = picoxcell_init_irq,
.handle_irq = vic_handle_irq,
.timer = &picoxcell_timer,
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
index 5263f0fa095..83d55ab956a 100644
--- a/arch/arm/mach-picoxcell/common.h
+++ b/arch/arm/mach-picoxcell/common.h
@@ -13,6 +13,5 @@
#include <asm/mach/time.h>
extern struct sys_timer picoxcell_timer;
-extern void picoxcell_map_io(void);
#endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/irqs.h b/arch/arm/mach-picoxcell/include/mach/irqs.h
index 4d13ed97091..59eac1ee282 100644
--- a/arch/arm/mach-picoxcell/include/mach/irqs.h
+++ b/arch/arm/mach-picoxcell/include/mach/irqs.h
@@ -1,8 +1,6 @@
/*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -16,10 +14,7 @@
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
-#define ARCH_NR_IRQS 64
-#define NR_IRQS (128 + ARCH_NR_IRQS)
-
-#define IRQ_VIC0_BASE 0
-#define IRQ_VIC1_BASE 32
+/* We dynamically allocate our irq_desc's. */
+#define NR_IRQS 0
#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/memory.h b/arch/arm/mach-picoxcell/include/mach/memory.h
deleted file mode 100644
index 40a8c178f10..00000000000
--- a/arch/arm/mach-picoxcell/include/mach/memory.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
index 67c589b0c1b..1a5d8cb57df 100644
--- a/arch/arm/mach-picoxcell/include/mach/system.h
+++ b/arch/arm/mach-picoxcell/include/mach/system.h
@@ -23,9 +23,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(int mode, const char *cmd)
-{
- /* Watchdog reset to go here. */
-}
-
#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-picoxcell/io.c b/arch/arm/mach-picoxcell/io.c
deleted file mode 100644
index 39e9b9e8cc3..00000000000
--- a/arch/arm/mach-picoxcell/io.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * All enquiries to support@picochip.com
- */
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/of.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/picoxcell_soc.h>
-
-#include "common.h"
-
-void __init picoxcell_map_io(void)
-{
- struct map_desc io_map = {
- .virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
- .pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
- .length = PICOXCELL_PERIPH_LENGTH,
- .type = MT_DEVICE,
- };
-
- iotable_init(&io_map, 1);
-}
diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c
index 90a554ff449..6c89cf8ab22 100644
--- a/arch/arm/mach-picoxcell/time.c
+++ b/arch/arm/mach-picoxcell/time.c
@@ -11,7 +11,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <linux/sched.h>
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
@@ -66,21 +65,11 @@ static void picoxcell_add_clocksource(struct device_node *source_timer)
dw_apb_clocksource_register(cs);
}
-static DEFINE_CLOCK_DATA(cd);
static void __iomem *sched_io_base;
-unsigned long long notrace sched_clock(void)
+unsigned u32 notrace picoxcell_read_sched_clock(void)
{
- cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
-
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace picoxcell_update_sched_clock(void)
-{
- cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
-
- update_sched_clock(&cd, cyc, (u32)~0);
+ return __raw_readl(sched_io_base);
}
static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
@@ -100,7 +89,7 @@ static void picoxcell_init_sched_clock(void)
timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
of_node_put(sched_timer);
- init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate);
+ setup_sched_clock(picoxcell_read_sched_clock, 32, rate);
}
static const struct of_device_id picoxcell_timer_ids[] __initconst = {
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index cdb95e726f5..4cfb40b2ec1 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -260,6 +260,11 @@ void __init pnx4008_map_io(void)
iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
}
+static void pnx4008_restart(char mode, const char *cmd)
+{
+ soft_restart(0);
+}
+
extern struct sys_timer pnx4008_timer;
MACHINE_START(PNX4008, "Philips PNX4008")
@@ -269,4 +274,5 @@ MACHINE_START(PNX4008, "Philips PNX4008")
.init_irq = pnx4008_init_irq,
.init_machine = pnx4008_init,
.timer = &pnx4008_timer,
+ .restart = pnx4008_restart,
MACHINE_END
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
index 5d6384a6128..60cfe718809 100644
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -21,18 +21,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
static void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- soft_restart(0);
-}
-
#endif
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 83e5d212811..b28a930d4f8 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -16,6 +16,7 @@ extern struct sys_timer sirfsoc_timer;
extern void __init sirfsoc_of_irq_init(void);
extern void __init sirfsoc_of_clk_init(void);
+extern void sirfsoc_restart(char, const char *);
#ifndef CONFIG_DEBUG_LL
static inline void sirfsoc_map_lluart(void) {}
diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h
index 0dbd257ad16..2c7d2a9d0c9 100644
--- a/arch/arm/mach-prima2/include/mach/system.h
+++ b/arch/arm/mach-prima2/include/mach/system.h
@@ -9,21 +9,9 @@
#ifndef __MACH_SYSTEM_H__
#define __MACH_SYSTEM_H__
-#include <linux/bitops.h>
-#include <mach/hardware.h>
-
-#define SIRFSOC_SYS_RST_BIT BIT(31)
-
-extern void __iomem *sirfsoc_rstc_base;
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
-}
-
#endif
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index a12b689a870..02b9c05ff99 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -40,4 +40,5 @@ MACHINE_START(PRIMA2_EVB, "prima2cb")
.dma_zone_size = SZ_256M,
.init_machine = sirfsoc_mach_init,
.dt_compat = prima2cb_dt_match,
+ .restart = sirfsoc_restart,
MACHINE_END
diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c
index 492cfa8d261..762adb73ab7 100644
--- a/arch/arm/mach-prima2/rstc.c
+++ b/arch/arm/mach-prima2/rstc.c
@@ -68,3 +68,10 @@ int sirfsoc_reset_device(struct device *dev)
return 0;
}
+
+#define SIRFSOC_SYS_RST_BIT BIT(31)
+
+void sirfsoc_restart(char mode, const char *cmd)
+{
+ writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
+}
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 4b81f59a4cb..82514f5c38f 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -829,4 +829,5 @@ MACHINE_START(BALLOON3, "Balloon3")
.timer = &pxa_timer,
.init_machine = balloon3_init,
.atag_offset = 0x100,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4efc16d39c7..c2f0be040d2 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -153,5 +153,6 @@ MACHINE_START(CAPC7117,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
- .init_machine = capc7117_init
+ .init_machine = capc7117_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index f2e4190080c..ec170a552c2 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -524,4 +524,5 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX")
#ifdef CONFIG_PCI
.dma_zone_size = SZ_64M,
#endif
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index e096bba8fd5..7236974da0b 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -858,4 +858,5 @@ MACHINE_START(CM_X300, "CM-X300 module")
.timer = &pxa_timer,
.init_machine = cm_x300_init,
.fixup = cm_x300_fixup,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 05bfa1b1c00..6a685165c9f 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -313,6 +313,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
@@ -322,5 +323,6 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index c825e8bf2db..c01059a61f3 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -189,5 +189,6 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index d23b92b8048..5028f2300d5 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -259,5 +259,6 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 549468d088b..9d4dc5970b9 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -655,7 +655,7 @@ static void corgi_poweroff(void)
/* Green LED off tells the bootloader to halt */
gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
- arm_machine_restart('h', NULL);
+ pxa_restart('h', NULL);
}
static void corgi_restart(char mode, const char *cmd)
@@ -664,13 +664,12 @@ static void corgi_restart(char mode, const char *cmd)
/* Green LED on tells the bootloader to reboot */
gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
- arm_machine_restart('h', cmd);
+ pxa_restart('h', cmd);
}
static void __init corgi_init(void)
{
pm_power_off = corgi_poweroff;
- arm_pm_restart = corgi_restart;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
@@ -726,6 +725,7 @@ MACHINE_START(CORGI, "SHARP Corgi")
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
+ .restart = corgi_restart,
MACHINE_END
#endif
@@ -737,6 +737,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
+ .restart = corgi_restart,
MACHINE_END
#endif
@@ -748,6 +749,7 @@ MACHINE_START(HUSKY, "SHARP Husky")
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
+ .restart = corgi_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 5e2cf39e9e4..fb5a51d834e 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -278,4 +278,5 @@ MACHINE_START(CSB726, "Cogent CSB726")
.handle_irq = pxa27x_handle_irq,
.init_machine = csb726_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 94acc0b01dd..bd396ba67af 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1305,6 +1305,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
+ .restart = pxa_restart,
MACHINE_END
MACHINE_START(EXEDA, "Compulab eXeda")
@@ -1314,4 +1315,5 @@ MACHINE_START(EXEDA, "Compulab eXeda")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index d82b7aa3c09..69473db9775 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -196,6 +196,7 @@ MACHINE_START(E330, "Toshiba e330")
.fixup = eseries_fixup,
.init_machine = e330_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -246,6 +247,7 @@ MACHINE_START(E350, "Toshiba e350")
.fixup = eseries_fixup,
.init_machine = e350_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -369,6 +371,7 @@ MACHINE_START(E400, "Toshiba e400")
.fixup = eseries_fixup,
.init_machine = e400_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -558,6 +561,7 @@ MACHINE_START(E740, "Toshiba e740")
.fixup = eseries_fixup,
.init_machine = e740_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -750,6 +754,7 @@ MACHINE_START(E750, "Toshiba e750")
.fixup = eseries_fixup,
.init_machine = e750_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -955,5 +960,6 @@ MACHINE_START(E800, "Toshiba e800")
.fixup = eseries_fixup,
.init_machine = e800_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 8308eee5a92..15ab2533667 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -804,6 +804,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a780_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -870,6 +871,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e680_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -936,6 +938,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a1200_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1127,6 +1130,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a910_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1193,6 +1197,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e6_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1233,5 +1238,6 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e2_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 92a2e85ab02..0d729e6619d 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -57,3 +57,5 @@ void __init pxa_set_ffuart_info(void *info);
void __init pxa_set_btuart_info(void *info);
void __init pxa_set_stuart_info(void *info);
void __init pxa_set_hwuart_info(void *info);
+
+void pxa_restart(char, const char *);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index ffdd70dad32..ac3b1cef475 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -239,4 +239,5 @@ MACHINE_START(GUMSTIX, "Gumstix")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = gumstix_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 4b5e110640b..fde6b4c873c 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -209,4 +209,5 @@ MACHINE_START(H5400, "HP iPAQ H5000")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = h5000_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index f2c32457084..26d069a9f90 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -164,4 +164,5 @@ MACHINE_START(HIMALAYA, "HTC Himalaya")
.handle_irq = pxa25x_handle_irq,
.init_machine = himalaya_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6f6368ece9b..ce16bdae96d 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -845,4 +845,5 @@ MACHINE_START(H4700, "HP iPAQ HX4700")
.handle_irq = pxa27x_handle_irq,
.init_machine = hx4700_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index f78d5db758d..e239b82c99d 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -196,5 +196,6 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
- .init_machine = icontrol_init
+ .init_machine = icontrol_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index ddf20e5c376..fbabd84e110 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -199,4 +199,5 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = idp_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
index d1fce8b6d10..c5afacd3cc0 100644
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -9,15 +9,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
-#include <asm/proc-fns.h>
-#include "hardware.h"
-#include "pxa2xx-regs.h"
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-
-void arch_reset(char mode, const char *cmd);
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 7b324ec6449..c337c7eed51 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -445,4 +445,5 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = littleton_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1dd530279e0..6119c015f39 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -505,4 +505,5 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = lpd270_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c48ce6da918..4b7a5287165 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -556,4 +556,5 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = lubbock_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 4b796c37af3..4e6774fff42 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -760,4 +760,5 @@ MACHINE_START(MAGICIAN, "HTC Magician")
.handle_irq = pxa27x_handle_irq,
.init_machine = magician_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 0567d3965fd..ca14555d5e1 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -622,4 +622,5 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = mainstone_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index f2d75217eb6..dce71b4a3a5 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -692,13 +692,13 @@ static void mioa701_machine_exit(void);
static void mioa701_poweroff(void)
{
mioa701_machine_exit();
- arm_machine_restart('s', NULL);
+ pxa_restart('s', NULL);
}
static void mioa701_restart(char c, const char *cmd)
{
mioa701_machine_exit();
- arm_machine_restart('s', cmd);
+ pxa_restart('s', cmd);
}
static struct gpio global_gpios[] = {
@@ -739,7 +739,6 @@ static void __init mioa701_machine_init(void)
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
- arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
@@ -763,4 +762,5 @@ MACHINE_START(MIOA701, "MIO A701")
.handle_irq = &pxa27x_handle_irq,
.init_machine = mioa701_machine_init,
.timer = &pxa_timer,
+ .restart = mioa701_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 4af5d513c38..169bf8f97af 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -98,5 +98,6 @@ MACHINE_START(NEC_MP900, "MobilePro900/C")
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_machine = mp900c_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 3d4a2819cae..1fa80f4f80c 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -347,5 +347,6 @@ MACHINE_START(PALMLD, "Palm LifeDrive")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmld_init
+ .init_machine = palmld_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 99d6bcf1f97..5ba14316bd9 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -208,5 +208,6 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmt5_init
+ .init_machine = palmt5_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 2c24c67fd92..29b51b40f09 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -542,5 +542,6 @@ MACHINE_START(PALMTC, "Palm Tungsten|C")
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmtc_init
+ .init_machine = palmtc_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 9376da06404..5ebf49acb82 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -361,5 +361,6 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2")
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmte2_init
+ .init_machine = palmte2_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 94e9708b349..ec8249156c0 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -452,6 +452,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = treo680_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -464,5 +465,6 @@ MACHINE_START(CENTRO, "Palm Centro 685")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = centro_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 4e3e45927e9..6170d76dfba 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -369,5 +369,6 @@ MACHINE_START(PALMTX, "Palm T|X")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmtx_init
+ .init_machine = palmtx_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 68e18baf8e0..b2dff9d415e 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -404,5 +404,6 @@ MACHINE_START(PALMZ72, "Palm Zire72")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmz72_init
+ .init_machine = palmz72_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 0b825a35353..fe9054435b6 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -265,4 +265,5 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = pcm027_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index afcb48a5792..b260ce872d2 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -417,7 +417,7 @@ static struct i2c_board_info __initdata poodle_i2c_devices[] = {
static void poodle_poweroff(void)
{
- arm_machine_restart('h', NULL);
+ pxa_restart('h', NULL);
}
static void __init poodle_init(void)
@@ -466,4 +466,5 @@ MACHINE_START(POODLE, "SHARP Poodle")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = poodle_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index f0c05f4d12e..4962b167662 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1093,6 +1093,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1104,6 +1105,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1115,5 +1117,6 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index b8bcda15da8..c8497b00cdf 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -81,8 +81,11 @@ static void do_hw_reset(void)
OSMR3 = OSCR + 368640; /* ... in 100 ms */
}
-void arch_reset(char mode, const char *cmd)
+void pxa_restart(char mode, const char *cmd)
{
+ local_irq_disable();
+ local_fiq_disable();
+
clear_reset_status(RESET_STATUS_ALL);
switch (mode) {
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index fc2c1e05af9..878707056e6 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -602,4 +602,5 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = saar_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 3e999e308a2..b6dbaca460c 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -111,5 +111,6 @@ MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = saarb_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 2f57d94de72..a7f81a3fd13 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -926,7 +926,7 @@ static inline void spitz_i2c_init(void) {}
******************************************************************************/
static void spitz_poweroff(void)
{
- arm_machine_restart('g', NULL);
+ pxa_restart('g', NULL);
}
static void spitz_restart(char mode, const char *cmd)
@@ -943,7 +943,6 @@ static void __init spitz_init(void)
{
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
pm_power_off = spitz_poweroff;
- arm_pm_restart = spitz_restart;
PMCR = 0x00;
@@ -989,6 +988,7 @@ MACHINE_START(SPITZ, "SHARP Spitz")
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
+ .restart = spitz_restart,
MACHINE_END
#endif
@@ -1001,6 +1001,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
+ .restart = spitz_restart,
MACHINE_END
#endif
@@ -1013,5 +1014,6 @@ MACHINE_START(AKITA, "SHARP Akita")
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
+ .restart = spitz_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 4c9a48bef56..80d7f23ad0f 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1005,6 +1005,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2")
.timer = &pxa_timer,
.init_machine = imote2_init,
.atag_offset = 0x100,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1017,5 +1018,6 @@ MACHINE_START(STARGATE2, "Stargate 2")
.timer = &pxa_timer,
.init_machine = stargate2_init,
.atag_offset = 0x100,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index ad47bb98f30..4fa36a3e383 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -495,4 +495,5 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = tavorevb_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd569167302..8a22879f0bb 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -132,4 +132,5 @@ MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = evb3_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index de684701449..b503049d6d2 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -16,7 +16,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
-#include <linux/sched.h>
#include <asm/div64.h>
#include <asm/mach/irq.h>
@@ -32,18 +31,10 @@
* long as there is always less than 582 seconds between successive
* calls to sched_clock() which should always be the case in practice.
*/
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 notrace pxa_read_sched_clock(void)
{
- u32 cyc = OSCR;
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace pxa_update_sched_clock(void)
-{
- u32 cyc = OSCR;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return OSCR;
}
@@ -119,7 +110,7 @@ static void __init pxa_timer_init(void)
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
- init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
+ setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
ckevt_pxa_osmr0.max_delta_ns =
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ef6453041cf..dfe40f8705a 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -905,7 +905,7 @@ static struct platform_device *devices[] __initdata = {
static void tosa_poweroff(void)
{
- arm_machine_restart('g', NULL);
+ pxa_restart('g', NULL);
}
static void tosa_restart(char mode, const char *cmd)
@@ -935,7 +935,6 @@ static void __init tosa_init(void)
init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
pm_power_off = tosa_poweroff;
- arm_pm_restart = tosa_restart;
PCFR |= PCFR_OPDE;
@@ -978,4 +977,5 @@ MACHINE_START(TOSA, "SHARP Tosa")
.handle_irq = pxa25x_handle_irq,
.init_machine = tosa_init,
.timer = &pxa_timer,
+ .restart = tosa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 1aaed2b17e1..0f30af617d8 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -561,6 +561,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
@@ -571,4 +572,5 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 242ddae332d..afe2b749552 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -998,4 +998,5 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = viper_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index ca0c6615028..fed5fb08871 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -721,5 +721,6 @@ MACHINE_START(VPAC270, "Voipac PXA270")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = vpac270_init
+ .init_machine = vpac270_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 70e1730ef28..4bbe9a36fe7 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -185,5 +185,6 @@ MACHINE_START(XCEP, "Iskratel XCEP")
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index ead32c90fec..d75f66ab8c3 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -725,4 +725,5 @@ MACHINE_START(ZIPIT2, "Zipit Z2")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = z2_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 498b83b089f..9db35a7fcfc 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -911,5 +911,6 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = zeus_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 6c39c332841..7678b1bf790 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -430,4 +430,5 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = zylonite_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dba6d0c1fc1..c593be428b8 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -12,6 +12,8 @@ config REALVIEW_EB_A9MP
bool "Support Multicore Cortex-A9 Tile"
depends on MACH_REALVIEW_EB
select CPU_V7
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
help
Enable support for the Cortex-A9MPCore tile fitted to the
Realview(R) Emulation Baseboard platform.
@@ -21,6 +23,8 @@ config REALVIEW_EB_ARM11MP
depends on MACH_REALVIEW_EB
select CPU_V6K
select ARCH_HAS_BARRIERS if SMP
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
help
Enable support for the ARM11MPCore tile fitted to the Realview(R)
Emulation Baseboard platform.
@@ -39,6 +43,8 @@ config MACH_REALVIEW_PB11MP
select CPU_V6K
select ARM_GIC
select HAVE_PATA_PLATFORM
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_HAS_BARRIERS if SMP
help
Include support for the ARM(R) RealView(R) Platform Baseboard for
@@ -51,6 +57,7 @@ config MACH_REALVIEW_PB1176
select CPU_V6
select ARM_GIC
select HAVE_TCM
+ select MIGHT_HAVE_CACHE_L2X0
help
Include support for the ARM(R) RealView(R) Platform Baseboard for
ARM1176JZF-S.
@@ -78,6 +85,8 @@ config MACH_REALVIEW_PBX
bool "Support RealView(R) Platform Baseboard Explore"
select ARM_GIC
select HAVE_PATA_PLATFORM
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ZONE_DMA if SPARSEMEM
help
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 47259c89a75..735b57aaf2d 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -65,6 +65,5 @@ extern int realview_usb_register(struct resource *res);
extern void realview_init_early(void);
extern void realview_fixup(struct tag *tags, char **from,
struct meminfo *meminfo);
-extern void (*realview_reset)(char);
#endif
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index 6657ff23116..471b671159c 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -21,12 +21,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-void (*realview_reset)(char mode);
-
static inline void arch_idle(void)
{
/*
@@ -36,15 +30,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * To reset, we hit the on-board reset register
- * in the system FPGA
- */
- if (realview_reset)
- realview_reset(mode);
- dsb();
-}
-
#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 1ca944aea7f..f92a920cf50 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -415,7 +415,7 @@ static struct sys_timer realview_eb_timer = {
.init = realview_eb_timer_init,
};
-static void realview_eb_reset(char mode)
+static void realview_eb_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -427,6 +427,7 @@ static void realview_eb_reset(char mode)
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
if (core_tile_eb11mp())
__raw_writel(0x0008, reset_ctrl);
+ dsb();
}
static void __init realview_eb_init(void)
@@ -458,7 +459,6 @@ static void __init realview_eb_init(void)
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
- realview_reset = realview_eb_reset;
}
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
@@ -474,4 +474,5 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
+ .restart = realview_eb_restart,
MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index bd8fec8b20d..8ec37b29e0f 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -336,12 +336,13 @@ static struct sys_timer realview_pb1176_timer = {
.init = realview_pb1176_timer_init,
};
-static void realview_pb1176_reset(char mode)
+static void realview_pb1176_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
+ dsb();
}
static void realview_pb1176_fixup(struct tag *tags, char **from,
@@ -381,7 +382,6 @@ static void __init realview_pb1176_init(void)
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
- realview_reset = realview_pb1176_reset;
}
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
@@ -397,4 +397,5 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
+ .restart = realview_pb1176_restart,
MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index fa73ba81a44..f035fda8b61 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -315,7 +315,7 @@ static struct sys_timer realview_pb11mp_timer = {
.init = realview_pb11mp_timer_init,
};
-static void realview_pb11mp_reset(char mode)
+static void realview_pb11mp_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -327,6 +327,7 @@ static void realview_pb11mp_reset(char mode)
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(0x0000, reset_ctrl);
__raw_writel(0x0004, reset_ctrl);
+ dsb();
}
static void __init realview_pb11mp_init(void)
@@ -355,7 +356,6 @@ static void __init realview_pb11mp_init(void)
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
- realview_reset = realview_pb11mp_reset;
}
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
@@ -371,4 +371,5 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
+ .restart = realview_pb11mp_restart,
MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 6e5f2b9ddb7..0109c8b440c 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -271,7 +271,7 @@ static struct sys_timer realview_pba8_timer = {
.init = realview_pba8_timer_init,
};
-static void realview_pba8_reset(char mode)
+static void realview_pba8_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -283,6 +283,7 @@ static void realview_pba8_reset(char mode)
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(0x0000, reset_ctrl);
__raw_writel(0x0004, reset_ctrl);
+ dsb();
}
static void __init realview_pba8_init(void)
@@ -305,7 +306,6 @@ static void __init realview_pba8_init(void)
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
- realview_reset = realview_pba8_reset;
}
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
@@ -321,4 +321,5 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
+ .restart = realview_pba8_restart,
MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 7aabc21af01..0194b3e26dc 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -339,7 +339,7 @@ static void realview_pbx_fixup(struct tag *tags, char **from,
#endif
}
-static void realview_pbx_reset(char mode)
+static void realview_pbx_restart(char mode, const char *cmd)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
@@ -351,6 +351,7 @@ static void realview_pbx_reset(char mode)
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(0x00F0, reset_ctrl);
__raw_writel(0x00F4, reset_ctrl);
+ dsb();
}
static void __init realview_pbx_init(void)
@@ -388,7 +389,6 @@ static void __init realview_pbx_init(void)
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
- realview_reset = realview_pbx_reset;
}
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
@@ -404,4 +404,5 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
#ifdef CONFIG_ZONE_DMA
.dma_zone_size = SZ_256M,
#endif
+ .restart = realview_pbx_restart,
MACHINE_END
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
index a354f4d092c..359bab94b6a 100644
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -7,21 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iomd.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- iomd_writeb(0, IOMD_ROMCR0);
-
- /*
- * Jump into the ROM
- */
- soft_restart(0);
-}
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 8559598ab76..3d44a59fc0d 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -24,6 +24,7 @@
#include <asm/elf.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
+#include <asm/hardware/iomd.h>
#include <asm/page.h>
#include <asm/domain.h>
#include <asm/setup.h>
@@ -214,6 +215,16 @@ static int __init rpc_init(void)
arch_initcall(rpc_init);
+static void rpc_restart(char mode, const char *cmd)
+{
+ iomd_writeb(0, IOMD_ROMCR0);
+
+ /*
+ * Jump into the ROM
+ */
+ soft_restart(0);
+}
+
extern struct sys_timer ioc_timer;
MACHINE_START(RISCPC, "Acorn-RiscPC")
@@ -224,4 +235,5 @@ MACHINE_START(RISCPC, "Acorn-RiscPC")
.map_io = rpc_map_io,
.init_irq = rpc_init_irq,
.timer = &ioc_timer,
+ .restart = rpc_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/common.h b/arch/arm/mach-s3c2410/common.h
new file mode 100644
index 00000000000..f65dc806296
--- /dev/null
+++ b/arch/arm/mach-s3c2410/common.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S3C2410 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H
+#define __ARCH_ARM_MACH_S3C2410_COMMON_H
+
+void s3c2410_restart(char mode, const char *cmd);
+
+#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/reset.h b/arch/arm/mach-s3c2410/include/mach/reset.h
deleted file mode 100644
index f8c9387b049..00000000000
--- a/arch/arm/mach-s3c2410/include/mach/reset.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/reset.h
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU reset controls
-*/
-
-#ifndef __ASM_ARCH_RESET_H
-#define __ASM_ARCH_RESET_H __FILE__
-
-/* This allows the over-ride of the default reset code
-*/
-
-extern void (*s3c24xx_reset_hook)(void);
-
-#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
deleted file mode 100644
index 913893d4465..00000000000
--- a/arch/arm/mach-s3c2410/include/mach/system-reset.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/system-reset.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/hardware.h>
-#include <plat/watchdog-reset.h>
-
-extern void (*s3c24xx_reset_hook)(void);
-
-static void
-arch_reset(char mode, const char *cmd)
-{
- if (mode == 's') {
- soft_restart(0);
- }
-
- if (s3c24xx_reset_hook)
- s3c24xx_reset_hook();
-
- arch_wdt_reset();
-
- /* we'll take a jump through zero as a poor second */
- soft_restart(0);
-}
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
index a8cbca6701e..5e215c1a5c8 100644
--- a/arch/arm/mach-s3c2410/include/mach/system.h
+++ b/arch/arm/mach-s3c2410/include/mach/system.h
@@ -15,12 +15,10 @@
#include <mach/map.h>
#include <mach/idle.h>
-#include <mach/reset.h>
#include <mach/regs-clock.h>
void (*s3c24xx_idle)(void);
-void (*s3c24xx_reset_hook)(void);
void s3c24xx_default_idle(void)
{
@@ -54,5 +52,3 @@ static void arch_idle(void)
else
s3c24xx_default_idle();
}
-
-#include <mach/system-reset.h>
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 79838942b0a..4220cc60de3 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -63,6 +63,8 @@
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include "common.h"
+
static struct resource amlm5900_nor_resource = {
.start = 0x00000000,
.end = 0x01000000 - 1,
@@ -241,4 +243,5 @@ MACHINE_START(AML_M5900, "AML_M5900")
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index a20ae1ad406..feeaf73933d 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -66,6 +66,7 @@
#include "usb-simtec.h"
#include "nor-simtec.h"
+#include "common.h"
#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
@@ -164,22 +165,6 @@ static struct map_desc bast_iodesc[] __initdata = {
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-static struct s3c24xx_uart_clksrc bast_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
-
static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -187,8 +172,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
[1] = {
.hwport = 1,
@@ -196,8 +179,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
/* port 2 is not actually used */
[2] = {
@@ -206,8 +187,6 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks),
}
};
@@ -662,4 +641,5 @@ MACHINE_START(BAST, "Simtec-BAST")
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 05a7d16e59f..ad9d865651d 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -70,6 +70,8 @@
#include <sound/uda1380.h>
+#include "common.h"
+
#define H1940_LATCH ((void __force __iomem *)0xF8000000)
#define H1940_PA_LATCH S3C2410_CS2
@@ -751,4 +753,5 @@ MACHINE_START(H1940, "IPAQ-H1940")
.init_irq = h1940_init_irq,
.init_machine = h1940_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 1dc3e323441..383d00ca8f6 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -51,6 +51,8 @@
#include <plat/s3c2410.h>
#include <plat/udc.h>
+#include "common.h"
+
static struct map_desc n30_iodesc[] __initdata = {
/* nothing here yet */
};
@@ -591,6 +593,7 @@ MACHINE_START(N30, "Acer-N30")
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
+ .restart = s3c2410_restart,
MACHINE_END
MACHINE_START(N35, "Acer-N35")
@@ -601,4 +604,5 @@ MACHINE_START(N35, "Acer-N35")
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index f03f3fd9cec..5f1e0eeb38a 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -38,6 +38,8 @@
#include <plat/iic.h>
#include <plat/cpu.h>
+#include "common.h"
+
static struct map_desc otom11_iodesc[] __initdata = {
/* Device area */
{ (u32)OTOM_VA_CS8900A_BASE, OTOM_PA_CS8900A_BASE, SZ_16M, MT_DEVICE },
@@ -121,4 +123,5 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 45185215625..58f2c17b9f0 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -62,6 +62,8 @@
#include <plat/cpu.h>
#include <plat/pm.h>
+#include "common.h"
+
static struct map_desc qt2410_iodesc[] __initdata = {
{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
};
@@ -350,6 +352,5 @@ MACHINE_START(QT2410, "QT2410")
.init_irq = s3c24xx_init_irq,
.init_machine = qt2410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
-
-
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 99c9dfdb71c..bdc27e77287 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -54,6 +54,8 @@
#include <plat/common-smdk.h>
+#include "common.h"
+
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
};
@@ -116,6 +118,5 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
.init_irq = s3c24xx_init_irq,
.init_machine = smdk2410_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
-
-
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index e0d0b6fb280..1114666f0ef 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -54,6 +54,8 @@
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include "common.h"
+
static struct resource tct_hammer_nor_resource = {
.start = 0x00000000,
.end = 0x01000000 - 1,
@@ -151,4 +153,5 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
.init_irq = s3c24xx_init_irq,
.init_machine = tct_hammer_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index df47e8e9006..dbe668a803e 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -53,6 +53,7 @@
#include "usb-simtec.h"
#include "nor-simtec.h"
+#include "common.h"
/* macros for virtual address mods for the io space entries */
#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -109,23 +110,6 @@ static struct map_desc vr1000_iodesc[] __initdata = {
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-/* uart clock source(s) */
-
-static struct s3c24xx_uart_clksrc vr1000_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0.
- }
-};
-
static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -133,8 +117,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = vr1000_serial_clocks,
- .clocks_size = ARRAY_SIZE(vr1000_serial_clocks),
},
[1] = {
.hwport = 1,
@@ -142,8 +124,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = vr1000_serial_clocks,
- .clocks_size = ARRAY_SIZE(vr1000_serial_clocks),
},
/* port 2 is not actually used */
[2] = {
@@ -152,9 +132,6 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = vr1000_serial_clocks,
- .clocks_size = ARRAY_SIZE(vr1000_serial_clocks),
-
}
};
@@ -405,4 +382,5 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 3d7ebc557a7..dad596332c5 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -42,6 +42,7 @@
#include <plat/clock.h>
#include <plat/pll.h>
#include <plat/pm.h>
+#include <plat/watchdog-reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -123,12 +124,18 @@ static struct clk s3c2410_armclk = {
.id = -1,
};
+static struct clk_lookup s3c2410_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+};
+
void __init s3c2410_init_clocks(int xtal)
{
s3c24xx_register_baseclocks(xtal);
s3c2410_setup_clocks();
s3c2410_baseclk_add();
s3c24xx_register_clock(&s3c2410_armclk);
+ clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
}
struct sysdev_class s3c2410_sysclass = {
@@ -183,3 +190,15 @@ int __init s3c2410a_init(void)
s3c2410_sysdev.cls = &s3c2410a_sysclass;
return s3c2410_init();
}
+
+void s3c2410_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ soft_restart(0);
+ }
+
+ arch_wdt_reset();
+
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 140711db6c8..cd50291931f 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -659,6 +659,12 @@ static struct clk *clks[] __initdata = {
&clk_armclk,
};
+static struct clk_lookup s3c2412_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk),
+};
+
int __init s3c2412_baseclk_add(void)
{
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
@@ -751,6 +757,7 @@ int __init s3c2412_baseclk_add(void)
s3c2412_clkcon_enable(clkp, 0);
}
+ clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
s3c_pwmclk_init();
return 0;
}
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 286ef1738c6..ae73ba34ecc 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -48,6 +48,7 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
+#include <plat/s3c2412.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
@@ -661,4 +662,5 @@ MACHINE_START(JIVE, "JIVE")
.map_io = jive_map_io,
.init_machine = jive_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index f1eec1b5493..b11451b853d 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -134,6 +134,7 @@ MACHINE_START(S3C2413, "S3C2413")
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2412_restart,
MACHINE_END
MACHINE_START(SMDK2412, "SMDK2412")
@@ -145,6 +146,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2412_restart,
MACHINE_END
MACHINE_START(SMDK2413, "SMDK2413")
@@ -156,4 +158,5 @@ MACHINE_START(SMDK2413, "SMDK2413")
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 1bbb1ef5f4f..94bfaa1fb14 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -162,4 +162,5 @@ MACHINE_START(VSTMS, "VSTMS")
.init_machine = vstms_init,
.map_io = vstms_map_io,
.timer = &s3c24xx_timer,
+ .restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 57a1e01e4e5..867ce2e269f 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -32,7 +32,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/reset.h>
#include <mach/idle.h>
#include <plat/cpu-freq.h>
@@ -131,8 +130,11 @@ static void s3c2412_idle(void)
cpu_do_idle();
}
-static void s3c2412_hard_reset(void)
+void s3c2412_restart(char mode, const char *cmd)
{
+ if (mode == 's')
+ soft_restart(0);
+
/* errata "Watch-dog/Software Reset Problem" specifies that
* this reset must be done with the SYSCLK sourced from
* EXTCLK instead of FOUT to avoid a glitch in the reset
@@ -164,10 +166,6 @@ void __init s3c2412_map_io(void)
s3c24xx_idle = s3c2412_idle;
- /* set custom reset hook */
-
- s3c24xx_reset_hook = s3c2412_hard_reset;
-
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile
index 7b805b279ca..ca0cd227f87 100644
--- a/arch/arm/mach-s3c2416/Makefile
+++ b/arch/arm/mach-s3c2416/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_S3C2416_PM) += pm.o
#obj-$(CONFIG_S3C2416_DMA) += dma.o
# Device setup
-obj-$(CONFIG_S3C2416_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# Machine support
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index afbbe8bc21d..59f54d1d7f8 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -90,39 +90,38 @@ static struct clksrc_clk hsmmc_div[] = {
},
};
-static struct clksrc_clk hsmmc_mux[] = {
- [0] = {
- .clk = {
- .name = "hsmmc-if",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 6),
- .enable = s3c2443_clkcon_enable_s,
- },
- .sources = &(struct clksrc_sources) {
- .nr_sources = 2,
- .sources = (struct clk *[]) {
- [0] = &hsmmc_div[0].clk,
- [1] = NULL, /* to fix */
- },
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
+static struct clksrc_clk hsmmc_mux0 = {
+ .clk = {
+ .name = "hsmmc-if",
+ .devname = "s3c-sdhci.0",
+ .ctrlbit = (1 << 6),
+ .enable = s3c2443_clkcon_enable_s,
},
- [1] = {
- .clk = {
- .name = "hsmmc-if",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 12),
- .enable = s3c2443_clkcon_enable_s,
+ .sources = &(struct clksrc_sources) {
+ .nr_sources = 2,
+ .sources = (struct clk * []) {
+ [0] = &hsmmc_div[0].clk,
+ [1] = NULL, /* to fix */
},
- .sources = &(struct clksrc_sources) {
- .nr_sources = 2,
- .sources = (struct clk *[]) {
- [0] = &hsmmc_div[1].clk,
- [1] = NULL, /* to fix */
- },
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
+};
+
+static struct clksrc_clk hsmmc_mux1 = {
+ .clk = {
+ .name = "hsmmc-if",
+ .devname = "s3c-sdhci.1",
+ .ctrlbit = (1 << 12),
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .sources = &(struct clksrc_sources) {
+ .nr_sources = 2,
+ .sources = (struct clk * []) {
+ [0] = &hsmmc_div[1].clk,
+ [1] = NULL, /* to fix */
},
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
},
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
};
static struct clk hsmmc0_clk = {
@@ -144,8 +143,14 @@ static struct clksrc_clk *clksrcs[] __initdata = {
&hsspi_mux,
&hsmmc_div[0],
&hsmmc_div[1],
- &hsmmc_mux[0],
- &hsmmc_mux[1],
+ &hsmmc_mux0,
+ &hsmmc_mux1,
+};
+
+static struct clk_lookup s3c2416_clk_lookup[] = {
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
};
void __init s3c2416_init_clocks(int xtal)
@@ -167,6 +172,7 @@ void __init s3c2416_init_clocks(int xtal)
s3c_register_clksrc(clksrcs[ptr], 1);
s3c24xx_register_clock(&hsmmc0_clk);
+ clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
s3c_pwmclk_init();
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index a9eee531ca7..66b71736609 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -251,4 +251,5 @@ MACHINE_START(SMDK2416, "SMDK2416")
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2416_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index ee214bc83c8..46062232bbc 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -44,7 +44,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/reset.h>
#include <mach/idle.h>
#include <mach/regs-s3c2443-clock.h>
@@ -76,8 +75,11 @@ static struct sys_device s3c2416_sysdev = {
.cls = &s3c2416_sysclass,
};
-static void s3c2416_hard_reset(void)
+void s3c2416_restart(char mode, const char *cmd)
{
+ if (mode == 's')
+ soft_restart(0);
+
__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
}
@@ -85,7 +87,6 @@ int __init s3c2416_init(void)
{
printk(KERN_INFO "S3C2416: Initializing architecture\n");
- s3c24xx_reset_hook = s3c2416_hard_reset;
/* s3c24xx_idle = s3c2416_idle; */
/* change WDT IRQ number */
diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c
deleted file mode 100644
index cee53955eb0..00000000000
--- a/arch/arm/mach-s3c2416/setup-sdhci.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/setup-sdhci.c
- *
- * Copyright 2010 Promwad Innovation Company
- * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * S3C2416 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * Based on mach-s3c64xx/setup-sdhci.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c2416_hsmmc_clksrcs[4] = {
- [0] = "hsmmc",
- [1] = "hsmmc",
- [2] = "hsmmc-if",
- /* [3] = "48m", - note not successfully used yet */
-};
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index f9e6bdaf41d..c9879af42b0 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -34,6 +34,7 @@
#include <linux/mutex.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/serial_core.h>
#include <mach/hardware.h>
#include <linux/atomic.h>
@@ -43,6 +44,7 @@
#include <plat/clock.h>
#include <plat/cpu.h>
+#include <plat/regs-serial.h>
/* S3C2440 extended clock support */
@@ -108,6 +110,46 @@ static struct clk s3c2440_clk_ac97 = {
.ctrlbit = S3C2440_CLKCON_CAMERA,
};
+static unsigned long s3c2440_fclk_n_getrate(struct clk *clk)
+{
+ unsigned long ucon0, ucon1, ucon2, divisor;
+
+ /* the fun of calculating the uart divisors on the s3c2440 */
+ ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
+ ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
+ ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
+
+ ucon0 &= S3C2440_UCON0_DIVMASK;
+ ucon1 &= S3C2440_UCON1_DIVMASK;
+ ucon2 &= S3C2440_UCON2_DIVMASK;
+
+ if (ucon0 != 0)
+ divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
+ else if (ucon1 != 0)
+ divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
+ else if (ucon2 != 0)
+ divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
+ else
+ /* manual calims 44, seems to be 9 */
+ divisor = 9;
+
+ return clk_get_rate(clk->parent) / divisor;
+}
+
+static struct clk s3c2440_clk_fclk_n = {
+ .name = "fclk_n",
+ .parent = &clk_f,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2440_fclk_n_getrate,
+ },
+};
+
+static struct clk_lookup s3c2440_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
+};
+
static int s3c2440_clk_add(struct sys_device *sysdev)
{
struct clk *clock_upll;
@@ -126,10 +168,12 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
s3c2440_clk_cam.parent = clock_h;
s3c2440_clk_ac97.parent = clock_p;
s3c2440_clk_cam_upll.parent = clock_upll;
+ s3c24xx_register_clock(&s3c2440_clk_fclk_n);
s3c24xx_register_clock(&s3c2440_clk_ac97);
s3c24xx_register_clock(&s3c2440_clk_cam);
s3c24xx_register_clock(&s3c2440_clk_cam_upll);
+ clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
clk_disable(&s3c2440_clk_ac97);
clk_disable(&s3c2440_clk_cam);
diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h
new file mode 100644
index 00000000000..db8a98ac68c
--- /dev/null
+++ b/arch/arm/mach-s3c2440/common.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S3C2440 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
+#define __ARCH_ARM_MACH_S3C2440_COMMON_H
+
+void s3c2440_restart(char mode, const char *cmd);
+
+#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 74f92fc3fd0..24569550de1 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -55,6 +55,8 @@
#include <plat/cpu.h>
#include <plat/audio-simtec.h>
+#include "common.h"
+
#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
static struct map_desc anubis_iodesc[] __initdata = {
@@ -96,22 +98,6 @@ static struct map_desc anubis_iodesc[] __initdata = {
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
-
static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -119,8 +105,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = anubis_serial_clocks,
- .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
[1] = {
.hwport = 2,
@@ -128,8 +113,7 @@ static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = anubis_serial_clocks,
- .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
};
@@ -503,4 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 38887ee0c78..d6a9763110c 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -49,6 +49,8 @@
#include <plat/cpu.h>
#include <plat/mci.h>
+#include "common.h"
+
static struct map_desc at2440evb_iodesc[] __initdata = {
/* Nothing here */
};
@@ -57,22 +59,6 @@ static struct map_desc at2440evb_iodesc[] __initdata = {
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-static struct s3c24xx_uart_clksrc at2440evb_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
-
static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -80,8 +66,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = at2440evb_serial_clocks,
- .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
[1] = {
.hwport = 1,
@@ -89,8 +74,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = at2440evb_serial_clocks,
- .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
};
@@ -238,4 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index de1e0ff46ce..5859e609d28 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -90,6 +90,7 @@
#include <plat/iic.h>
#include <plat/ts.h>
+#include "common.h"
static struct pcf50633 *gta02_pcf;
@@ -600,4 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 937eb7818c1..adbbb85bc4c 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -60,6 +60,8 @@
#include <sound/s3c24xx_uda134x.h>
+#include "common.h"
+
#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
static struct map_desc mini2440_iodesc[] __initdata = {
@@ -699,4 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 61c0bf14816..40eaf844bc1 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -47,6 +47,8 @@
#include <plat/devs.h>
#include <plat/cpu.h>
+#include "common.h"
+
static struct map_desc nexcoder_iodesc[] __initdata = {
/* nothing here yet */
};
@@ -156,4 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index dc142ebf8cb..4c480ef734f 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -54,6 +54,8 @@
#include <plat/devs.h>
#include <plat/cpu.h>
+#include "common.h"
+
/* onboard perihperal map */
static struct map_desc osiris_iodesc[] __initdata = {
@@ -100,21 +102,6 @@ static struct map_desc osiris_iodesc[] __initdata = {
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -122,8 +109,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = osiris_serial_clocks,
- .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
[1] = {
.hwport = 1,
@@ -131,8 +117,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = osiris_serial_clocks,
- .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
[2] = {
.hwport = 2,
@@ -140,8 +125,7 @@ static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = osiris_serial_clocks,
- .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
}
};
@@ -452,4 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 0d3453bf567..f892e8befca 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -62,21 +62,14 @@
#include <sound/uda1380.h>
+#include "common.h"
+
#define LCD_PWM_PERIOD 192960
#define LCD_PWM_DUTY 127353
static struct map_desc rx1950_iodesc[] __initdata = {
};
-static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = {
- [0] = {
- .name = "fclk",
- .divisor = 0x0a,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -84,8 +77,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
- .clocks = rx1950_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
},
[1] = {
.hwport = 1,
@@ -93,8 +85,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
- .clocks = rx1950_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
},
/* IR port */
[2] = {
@@ -103,8 +94,7 @@ static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
.ucon = 0x3c5,
.ulcon = 0x43,
.ufcon = 0xf1,
- .clocks = rx1950_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
},
};
@@ -832,4 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index e19499c2f90..88d648a874d 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -51,6 +51,8 @@
#include <plat/cpu.h>
#include <plat/pm.h>
+#include "common.h"
+
static struct map_desc rx3715_iodesc[] __initdata = {
/* dump ISA space somewhere unused */
@@ -67,16 +69,6 @@ static struct map_desc rx3715_iodesc[] __initdata = {
},
};
-
-static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = {
- [0] = {
- .name = "fclk",
- .divisor = 0,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
[0] = {
.hwport = 0,
@@ -84,8 +76,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
- .clocks = rx3715_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
},
[1] = {
.hwport = 1,
@@ -93,8 +84,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x00,
- .clocks = rx3715_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
},
/* IR port */
[2] = {
@@ -103,8 +93,7 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
.ucon = 0x3c5,
.ulcon = 0x43,
.ufcon = 0x51,
- .clocks = rx3715_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
}
};
@@ -224,4 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 36eeb4197a8..1deb60d12a6 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -47,6 +47,8 @@
#include <plat/common-smdk.h>
+#include "common.h"
+
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -181,4 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2440_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 37f8cc6aabd..42d73f1e0ce 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -35,6 +35,7 @@
#include <plat/cpu.h>
#include <plat/s3c244x.h>
#include <plat/pm.h>
+#include <plat/watchdog-reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -73,3 +74,15 @@ void __init s3c2440_map_io(void)
s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
}
+
+void s3c2440_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ soft_restart(0);
+ }
+
+ arch_wdt_reset();
+
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index bec107e0044..20923695622 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -145,4 +145,5 @@ MACHINE_START(SMDK2443, "SMDK2443")
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c2443_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index a22b771b0f3..4568ded338d 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -31,7 +31,6 @@
#include <asm/irq.h>
#include <mach/regs-s3c2443-clock.h>
-#include <mach/reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -57,8 +56,11 @@ static struct sys_device s3c2443_sysdev = {
.cls = &s3c2443_sysclass,
};
-static void s3c2443_hard_reset(void)
+void s3c2443_restart(char mode, const char *cmd)
{
+ if (mode == 's')
+ soft_restart(0);
+
__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
}
@@ -66,8 +68,6 @@ int __init s3c2443_init(void)
{
printk("S3C2443: Initialising architecture\n");
- s3c24xx_reset_hook = s3c2443_hard_reset;
-
s3c_nand_setname("s3c2412-nand");
s3c_fb_setname("s3c2443-fb");
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 4d8c489edc0..e9dae9105df 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -77,6 +77,11 @@ config S3C64XX_SETUP_SDHCI_GPIO
help
Common setup code for S3C64XX SDHCI GPIO configurations
+config S3C64XX_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations
+
# S36400 Macchine support
config MACH_SMDK6400
@@ -276,6 +281,7 @@ config MACH_WLF_CRAGG_6410
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
+ select S3C64XX_SETUP_SPI
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_KEYPAD
select S3C_DEV_USB_HOST
@@ -286,7 +292,7 @@ config MACH_WLF_CRAGG_6410
select S3C_DEV_I2C1
select S3C_DEV_WDT
select S3C_DEV_RTC
- select S3C64XX_DEV_SPI
+ select S3C64XX_DEV_SPI0
select SAMSUNG_GPIO_EXTRA128
select I2C
help
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index cfc0b994180..1822ac2eba3 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -10,54 +10,49 @@ obj-m :=
obj-n :=
obj- :=
-# Core files
-obj-y += cpu.o
-obj-y += clock.o
+# Core
-# Core support for S3C6400 system
+obj-y += common.o clock.o
+
+# Core support
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
-obj-y += irq.o
-obj-y += irq-eint.o
+# PM
+
+obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o
# DMA support
obj-$(CONFIG_S3C64XX_DMA) += dma.o
-# Device setup
+# Device support
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-y += dev-uart.o
+obj-y += dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
-# PM
+# Device setup
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_PM) += irq-pm.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi.o
# Machine support
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
-obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
-obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
-obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
-
-# device support
-
-obj-y += dev-uart.o
-obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
+obj-$(CONFIG_MACH_HMT) += mach-hmt.o
+obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
+obj-$(CONFIG_MACH_NCP) += mach-ncp.o
+obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
+obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
+obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
+obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
+obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 39c238d7a3d..31bb27dc4ae 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -184,18 +184,6 @@ static struct clk init_clocks_off[] = {
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_SPI1,
}, {
- .name = "spi_48m",
- .devname = "s3c64xx-spi.0",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
- }, {
- .name = "spi_48m",
- .devname = "s3c64xx-spi.1",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
- }, {
.name = "48m",
.devname = "s3c-sdhci.0",
.parent = &clk_48m,
@@ -226,6 +214,22 @@ static struct clk init_clocks_off[] = {
},
};
+static struct clk clk_48m_spi0 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.0",
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
+};
+
+static struct clk clk_48m_spi1 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.1",
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
+};
+
static struct clk init_clocks[] = {
{
.name = "lcd",
@@ -243,24 +247,6 @@ static struct clk init_clocks[] = {
.enable = s3c64xx_hclk_ctrl,
.ctrlbit = S3C_CLKCON_HCLK_UHOST,
}, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC0,
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC1,
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
- }, {
.name = "otg",
.parent = &clk_h,
.enable = s3c64xx_hclk_ctrl,
@@ -310,6 +296,29 @@ static struct clk init_clocks[] = {
}
};
+static struct clk clk_hsmmc0 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC0,
+};
+
+static struct clk clk_hsmmc1 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC1,
+};
+
+static struct clk clk_hsmmc2 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
+};
static struct clk clk_fout_apll = {
.name = "fout_apll",
@@ -578,36 +587,6 @@ static struct clksrc_sources clkset_camif = {
static struct clksrc_clk clksrcs[] = {
{
.clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.0",
- .ctrlbit = S3C_CLKCON_SCLK_MMC0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 },
- .sources = &clkset_spi_mmc,
- }, {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.1",
- .ctrlbit = S3C_CLKCON_SCLK_MMC1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 },
- .sources = &clkset_spi_mmc,
- }, {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.2",
- .ctrlbit = S3C_CLKCON_SCLK_MMC2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 },
- .sources = &clkset_spi_mmc,
- }, {
- .clk = {
.name = "usb-bus-host",
.ctrlbit = S3C_CLKCON_SCLK_UHOST,
.enable = s3c64xx_sclk_ctrl,
@@ -617,35 +596,6 @@ static struct clksrc_clk clksrcs[] = {
.sources = &clkset_uhost,
}, {
.clk = {
- .name = "uclk1",
- .ctrlbit = S3C_CLKCON_SCLK_UART,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 },
- .sources = &clkset_uart,
- }, {
-/* Where does UCLK0 come from? */
- .clk = {
- .name = "spi-bus",
- .devname = "s3c64xx-spi.0",
- .ctrlbit = S3C_CLKCON_SCLK_SPI0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
- .sources = &clkset_spi_mmc,
- }, {
- .clk = {
- .name = "spi-bus",
- .devname = "s3c64xx-spi.1",
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
- .sources = &clkset_spi_mmc,
- }, {
- .clk = {
.name = "audio-bus",
.devname = "samsung-i2s.0",
.ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
@@ -695,6 +645,78 @@ static struct clksrc_clk clksrcs[] = {
},
};
+/* Where does UCLK0 come from? */
+static struct clksrc_clk clk_sclk_uclk = {
+ .clk = {
+ .name = "uclk1",
+ .ctrlbit = S3C_CLKCON_SCLK_UART,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 },
+ .sources = &clkset_uart,
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "mmc_bus",
+ .devname = "s3c-sdhci.0",
+ .ctrlbit = S3C_CLKCON_SCLK_MMC0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 },
+ .sources = &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "mmc_bus",
+ .devname = "s3c-sdhci.1",
+ .ctrlbit = S3C_CLKCON_SCLK_MMC1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 },
+ .sources = &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "mmc_bus",
+ .devname = "s3c-sdhci.2",
+ .ctrlbit = S3C_CLKCON_SCLK_MMC2,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 },
+ .sources = &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "spi-bus",
+ .devname = "s3c64xx-spi.0",
+ .ctrlbit = S3C_CLKCON_SCLK_SPI0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
+ .sources = &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "spi-bus",
+ .devname = "s3c64xx-spi.1",
+ .ctrlbit = S3C_CLKCON_SCLK_SPI1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
+ .sources = &clkset_spi_mmc,
+};
+
/* Clock initialisation code */
static struct clksrc_clk *init_parents[] = {
@@ -703,9 +725,42 @@ static struct clksrc_clk *init_parents[] = {
&clk_mout_mpll,
};
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uclk,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+};
+
+static struct clk *clk_cdev[] = {
+ &clk_hsmmc0,
+ &clk_hsmmc1,
+ &clk_hsmmc2,
+ &clk_48m_spi0,
+ &clk_48m_spi1,
+};
+
+static struct clk_lookup s3c64xx_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1),
+};
+
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-void __init_or_cpufreq s3c6400_setup_clocks(void)
+void __init_or_cpufreq s3c64xx_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long xtal;
@@ -804,13 +859,15 @@ static struct clk *clks[] __initdata = {
* as ARMCLK as well as the necessary parent clocks.
*
* This call does not setup the clocks, which is left to the
- * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * s3c64xx_setup_clocks() call which may be needed by the cpufreq
* or resume code to re-set the clocks if the bootloader has changed
* them.
*/
void __init s3c64xx_register_clocks(unsigned long xtal,
unsigned armclk_divlimit)
{
+ unsigned int cnt;
+
armclk_mask = armclk_divlimit;
s3c24xx_register_baseclocks(xtal);
@@ -821,7 +878,15 @@ void __init s3c64xx_register_clocks(unsigned long xtal,
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+ for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
+ s3c_disable_clocks(clk_cdev[cnt], 1);
+
s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
+ s3c_register_clksrc(clksrc_cdev[cnt], 1);
+ clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/common.c
index 4d203be1f4c..35182ba049d 100644
--- a/arch/arm/mach-s3c64xx/irq-eint.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -1,11 +1,13 @@
-/* arch/arm/plat-s3c64xx/irq-eint.c
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
*
- * S3C64XX - Interrupt handling for IRQ_EINT(x)
+ * Common Codes for S3C64XX machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,21 +15,183 @@
*/
#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
#include <asm/hardware/vic.h>
-#include <plat/regs-irqtype.h>
+#include <mach/map.h>
+#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <plat/gpio-cfg.h>
-#include <mach/map.h>
#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
#include <plat/pm.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irq-uart.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/regs-irqtype.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+/* uart registration process */
+
+void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S3C6400_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
+ .map_io = s3c6400_map_io,
+ .init_clocks = s3c6400_init_clocks,
+ .init_uarts = s3c64xx_init_uarts,
+ .init = s3c6400_init,
+ .name = name_s3c6400,
+ }, {
+ .idcode = S3C6410_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
+ .map_io = s3c6410_map_io,
+ .init_clocks = s3c6410_init_clocks,
+ .init_uarts = s3c64xx_init_uarts,
+ .init = s3c6410_init,
+ .name = name_s3c6410,
+ },
+};
+
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_MEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SROM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
+ .pfn = __phys_to_pfn(S3C_PA_UART),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC0,
+ .pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC1,
+ .pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S3C_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C64XX_VA_GPIO,
+ .pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C64XX_VA_MODEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+ .length = SZ_1K,
+ .type = MT_DEVICE,
+ },
+};
+
+struct sysdev_class s3c64xx_sysclass = {
+ .name = "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+ .cls = &s3c64xx_sysclass,
+};
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialise the io descriptors we need for initialisation */
+ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+ iotable_init(mach_desc, size);
+ init_consistent_dma_size(SZ_8M);
+
+ /* detect cpu id */
+ s3c64xx_init_cpu();
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+static __init int s3c64xx_sysdev_init(void)
+{
+ sysdev_class_register(&s3c64xx_sysclass);
+ return sysdev_register(&s3c64xx_sysdev);
+}
+core_initcall(s3c64xx_sysdev_init);
+
+/*
+ * setup the sources the vic should advertise resume
+ * for, even though it is not doing the wake
+ * (set_irq_wake needs to be valid)
+ */
+#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
+#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+ printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+ /* initialise the pair of VICs */
+ vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
+ vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
+
+ /* add the timer sub-irqs */
+ s3c_init_vic_timer_irq(5, IRQ_TIMER0);
+}
#define eint_offset(irq) ((irq) - IRQ_EINT(0))
#define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq)))
@@ -209,5 +373,13 @@ static int __init s3c64xx_init_irq_eint(void)
return 0;
}
-
arch_initcall(s3c64xx_init_irq_eint);
+
+void s3c64xx_restart(char mode, const char *cmd)
+{
+ if (mode != 's')
+ arch_wdt_reset();
+
+ /* if all else fails, or mode was for soft, jump to 0 */
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
new file mode 100644
index 00000000000..8dc8ab6d8d6
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Common Header for S3C64XX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C64XX_COMMON_H
+#define __ARCH_ARM_MACH_S3C64XX_COMMON_H
+
+void s3c64xx_init_irq(u32 vic0, u32 vic1);
+void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+
+void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+void s3c64xx_setup_clocks(void);
+
+void s3c64xx_restart(char mode, const char *cmd);
+
+extern struct syscore_ops s3c64xx_irq_syscore_ops;
+extern struct sysdev_class s3c64xx_sysclass;
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
+extern void s3c6400_map_io(void);
+extern void s3c6400_init_clocks(int xtal);
+
+#else
+#define s3c6400_init_clocks NULL
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+extern void s3c6410_init_clocks(int xtal);
+
+#else
+#define s3c6410_init_clocks NULL
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
deleted file mode 100644
index de085b798aa..00000000000
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/cpu.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* table of supported CPUs */
-
-static const char name_s3c6400[] = "S3C6400";
-static const char name_s3c6410[] = "S3C6410";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S3C6400_CPU_ID,
- .idmask = S3C64XX_CPU_MASK,
- .map_io = s3c6400_map_io,
- .init_clocks = s3c6400_init_clocks,
- .init_uarts = s3c6400_init_uarts,
- .init = s3c6400_init,
- .name = name_s3c6400,
- }, {
- .idcode = S3C6410_CPU_ID,
- .idmask = S3C64XX_CPU_MASK,
- .map_io = s3c6410_map_io,
- .init_clocks = s3c6410_init_clocks,
- .init_uarts = s3c6410_init_uarts,
- .init = s3c6410_init,
- .name = name_s3c6410,
- },
-};
-
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xfffff)
-
-static struct map_desc s3c_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_MEM,
- .pfn = __phys_to_pfn(S3C64XX_PA_SROM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S3C_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C64XX_VA_GPIO,
- .pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C64XX_VA_MODEM,
- .pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_USB_HSPHY,
- .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
- .length = SZ_1K,
- .type = MT_DEVICE,
- },
-};
-
-
-struct sysdev_class s3c64xx_sysclass = {
- .name = "s3c64xx-core",
-};
-
-static struct sys_device s3c64xx_sysdev = {
- .cls = &s3c64xx_sysclass,
-};
-
-/* uart registration process */
-
-void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
-
-/* read cpu identification code */
-
-void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
-{
- /* initialise the io descriptors we need for initialisation */
- iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
- iotable_init(mach_desc, size);
- init_consistent_dma_size(SZ_8M);
-
- /* detect cpu id */
- s3c64xx_init_cpu();
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-static __init int s3c64xx_sysdev_init(void)
-{
- sysdev_class_register(&s3c64xx_sysclass);
- return sysdev_register(&s3c64xx_sysdev);
-}
-
-core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
deleted file mode 100644
index 3341fd11872..00000000000
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dev-spi.c
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/spi-clocks.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-
-static char *spi_src_clks[] = {
- [S3C64XX_SPI_SRCCLK_PCLK] = "pclk",
- [S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus",
- [S3C64XX_SPI_SRCCLK_48M] = "spi_48m",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the GPC-3,7.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S3C64XX_GPC(0);
- break;
-
- case 1:
- base = S3C64XX_GPC(4);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- s3c_gpio_cfgall_range(base, 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
- return 0;
-}
-
-static struct resource s3c64xx_spi0_resource[] = {
- [0] = {
- .start = S3C64XX_PA_SPI0,
- .end = S3C64XX_PA_SPI0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI0_TX,
- .end = DMACH_SPI0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI0_RX,
- .end = DMACH_SPI0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
- .cfg_gpio = s3c64xx_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .tx_st_done = 21,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c64xx_device_spi0 = {
- .name = "s3c64xx-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource),
- .resource = s3c64xx_spi0_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c64xx_spi0_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_spi0);
-
-static struct resource s3c64xx_spi1_resource[] = {
- [0] = {
- .start = S3C64XX_PA_SPI1,
- .end = S3C64XX_PA_SPI1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI1_TX,
- .end = DMACH_SPI1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI1_RX,
- .end = DMACH_SPI1_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI1,
- .end = IRQ_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
- .cfg_gpio = s3c64xx_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .tx_st_done = 21,
-};
-
-struct platform_device s3c64xx_device_spi1 = {
- .name = "s3c64xx-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
- .resource = s3c64xx_spi1_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c64xx_spi1_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_spi1);
-
-void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
- struct s3c64xx_spi_info *pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0
- || src_clk_nr > S3C64XX_SPI_SRCCLK_48M) {
- printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- switch (cntrlr) {
- case 0:
- pd = &s3c64xx_spi0_pdata;
- break;
- case 1:
- pd = &s3c64xx_spi1_pdata;
- break;
- default:
- printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
- __func__, cntrlr);
- return;
- }
-
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index 23a1d71e4d5..8e2097bb208 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -115,6 +115,8 @@
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
#define S3C_PA_RTC S3C64XX_PA_RTC
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
+#define S3C_PA_SPI0 S3C64XX_PA_SPI0
+#define S3C_PA_SPI1 S3C64XX_PA_SPI1
#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
index d8ca5786ba2..353ed4389ae 100644
--- a/arch/arm/mach-s3c64xx/include/mach/system.h
+++ b/arch/arm/mach-s3c64xx/include/mach/system.h
@@ -11,20 +11,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-#include <plat/watchdog-reset.h>
-
static void arch_idle(void)
{
/* nothing here yet */
}
-static void arch_reset(char mode, const char *cmd)
-{
- if (mode != 's')
- arch_wdt_reset();
-
- /* if all else fails, or mode was for soft, jump to 0 */
- soft_restart(0);
-}
-
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
deleted file mode 100644
index b07357e9495..00000000000
--- a/arch/arm/mach-s3c64xx/irq.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-#include <plat/cpu.h>
-
-/* setup the sources the vic should advertise resume for, even though it
- * is not doing the wake (set_irq_wake needs to be valid) */
-#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
-#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
- 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
- printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
- /* initialise the pair of VICs */
- vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
- vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
-
- /* add the timer sub-irqs */
- s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-}
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 2bbc14d9342..b86f2779e4e 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -46,13 +46,14 @@
#include <plat/fb.h>
#include <plat/regs-fb-v4.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
+#include "common.h"
+
/* DM9000 */
#define ANW6410_PA_DM9000 (0x18000000)
@@ -241,4 +242,5 @@ MACHINE_START(ANW6410, "A&W6410")
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 799558c15b4..25d9f0cf945 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -53,7 +53,6 @@
#include <mach/regs-gpio-memport.h>
-#include <plat/s3c6410.h>
#include <plat/regs-serial.h>
#include <plat/regs-fb-v4.h>
#include <plat/fb.h>
@@ -69,6 +68,8 @@
#include <plat/iic.h>
#include <plat/pm.h>
+#include "common.h"
+
/* serial port setup */
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
@@ -749,4 +750,5 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index c5955f30170..521e07b8501 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -38,12 +38,13 @@
#include <plat/fb.h>
#include <plat/nand.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -272,4 +273,5 @@ MACHINE_START(HMT, "Airgoo-HMT")
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 4415c85e3f6..c34c2ab22ea 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -34,7 +34,6 @@
#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
-#include <plat/s3c6410.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@@ -46,6 +45,8 @@
#include <video/platform_lcd.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -350,4 +351,5 @@ MACHINE_START(MINI6410, "MINI6410")
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 9b2c610eac2..0efa2ba783b 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -40,12 +40,13 @@
#include <plat/iic.h>
#include <plat/fb.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -104,4 +105,5 @@ MACHINE_START(NCP, "NCP")
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index dbab49f2713..be2a9a22ab7 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -35,7 +35,6 @@
#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
-#include <plat/s3c6410.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@@ -47,6 +46,8 @@
#include <video/platform_lcd.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
@@ -331,4 +332,5 @@ MACHINE_START(REAL6410, "REAL6410")
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index cb1ebeb0876..ce31db13623 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -40,6 +40,8 @@
#include <video/platform_lcd.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 05394528265..3f42431d4dd 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -24,13 +24,13 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
#include "mach-smartq.h"
static struct gpio_led smartq5_leds[] = {
@@ -153,4 +153,5 @@ MACHINE_START(SMARTQ5, "SmartQ 5")
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index a58d1ba5cba..e5c09b6db96 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -24,13 +24,13 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
#include "mach-smartq.h"
static struct gpio_led smartq7_leds[] = {
@@ -169,4 +169,5 @@ MACHINE_START(SMARTQ7, "SmartQ 7")
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index be28a59e3f5..5f096534f4c 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -32,12 +32,13 @@
#include <plat/regs-serial.h>
-#include <plat/s3c6400.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -93,4 +94,5 @@ MACHINE_START(SMDK6400, "SMDK6400")
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 08309155d08..ca6fc204f0e 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -64,7 +64,6 @@
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -74,6 +73,8 @@
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
@@ -705,4 +706,5 @@ MACHINE_START(SMDK6410, "SMDK6410")
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 51c00f2453c..b1e1571f2f6 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -38,7 +38,8 @@
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
-#include <plat/s3c6400.h>
+
+#include "common.h"
void __init s3c6400_map_io(void)
{
@@ -60,7 +61,7 @@ void __init s3c6400_map_io(void)
void __init s3c6400_init_clocks(int xtal)
{
s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
- s3c6400_setup_clocks();
+ s3c64xx_setup_clocks();
}
void __init s3c6400_init_irq(void)
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 4117003464a..fba71bd991c 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -41,8 +41,8 @@
#include <plat/adc-core.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+
+#include "common.h"
void __init s3c6410_map_io(void)
{
@@ -66,7 +66,7 @@ void __init s3c6410_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
- s3c6400_setup_clocks();
+ s3c64xx_setup_clocks();
}
void __init s3c6410_init_irq(void)
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
deleted file mode 100644
index c75a71b2116..00000000000
--- a/arch/arm/mach-s3c64xx/setup-sdhci.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400/S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c64xx_hsmmc_clksrcs[4] = {
- [0] = "hsmmc",
- [1] = "hsmmc",
- [2] = "mmc_bus",
- /* [3] = "48m", - note not successfully used yet */
-};
diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c64xx/setup-spi.c
new file mode 100644
index 00000000000..d9592ad7a82
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-spi.c
@@ -0,0 +1,45 @@
+/* linux/arch/arm/mach-s3c64xx/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 18690c5f99e..dd8c85ef6da 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -36,6 +36,11 @@ config S5P64X0_SETUP_I2C1
help
Common setup code for i2c bus 1.
+config S5P64X0_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations
+
# machine support
config MACH_SMDK6440
@@ -45,7 +50,6 @@ config MACH_SMDK6440
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
- select S3C64XX_DEV_SPI
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
@@ -62,7 +66,6 @@ config MACH_SMDK6450
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
- select S3C64XX_DEV_SPI
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index a1324d8dc4e..e167ca136f5 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -10,14 +10,16 @@ obj-m :=
obj-n :=
obj- :=
-# Core support for S5P64X0 system
+# Core
-obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o
-obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o
+obj-y += common.o clock.o
obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o
obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
+
obj-$(CONFIG_PM) += pm.o irq-pm.o
+obj-y += dma.o
+
# machine support
obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o
@@ -26,7 +28,8 @@ obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o
# device support
obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-y += setup-i2c0.o
obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5P64X0_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index c54c65d511f..58811ba89ee 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -31,7 +31,8 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/s5p6440.h>
+
+#include "common.h"
static u32 epll_div[][5] = {
{ 36000000, 0, 48, 1, 4 },
@@ -268,18 +269,6 @@ static struct clk init_clocks_off[] = {
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 31),
}, {
- .name = "sclk_spi_48",
- .devname = "s3c64xx-spi.0",
- .parent = &clk_48m,
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "sclk_spi_48",
- .devname = "s3c64xx-spi.1",
- .parent = &clk_48m,
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 23),
- }, {
.name = "mmc_48m",
.devname = "s3c-sdhci.0",
.parent = &clk_48m,
@@ -421,35 +410,6 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
}, {
.clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 5),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .ctrlbit = (1 << 20),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .ctrlbit = (1 << 21),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
- }, {
- .clk = {
.name = "sclk_post",
.ctrlbit = (1 << 10),
.enable = s5p64x0_sclk_ctrl,
@@ -487,6 +447,41 @@ static struct clksrc_clk clksrcs[] = {
},
};
+static struct clksrc_clk clk_sclk_uclk = {
+ .clk = {
+ .name = "uclk1",
+ .ctrlbit = (1 << 5),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .ctrlbit = (1 << 20),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .ctrlbit = (1 << 21),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
/* Clock initialization code */
static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
@@ -505,6 +500,20 @@ static struct clk dummy_apb_pclk = {
.id = -1,
};
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uclk,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+};
+
+static struct clk_lookup s5p6440_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+};
+
void __init_or_cpufreq s5p6440_setup_clocks(void)
{
struct clk *xtal_clk;
@@ -583,9 +592,12 @@ void __init s5p6440_register_clocks(void)
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup));
s3c24xx_register_clock(&dummy_apb_pclk);
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index 2d04abfba12..bd9d1e6fc5e 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -31,7 +31,8 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/s5p6450.h>
+
+#include "common.h"
static struct clksrc_clk clk_mout_dpll = {
.clk = {
@@ -443,35 +444,6 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
}, {
.clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 5),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .ctrlbit = (1 << 20),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .ctrlbit = (1 << 21),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
- }, {
- .clk = {
.name = "sclk_fimc",
.ctrlbit = (1 << 10),
.enable = s5p64x0_sclk_ctrl,
@@ -536,6 +508,55 @@ static struct clksrc_clk clksrcs[] = {
},
};
+static struct clksrc_clk clk_sclk_uclk = {
+ .clk = {
+ .name = "uclk1",
+ .ctrlbit = (1 << 5),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .ctrlbit = (1 << 20),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .ctrlbit = (1 << 21),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uclk,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+};
+
+static struct clk_lookup s5p6450_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+};
+
/* Clock initialization code */
static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
@@ -634,9 +655,12 @@ void __init s5p6450_register_clocks(void)
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup));
s3c24xx_register_clock(&dummy_apb_pclk);
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
index b52c6e2f37a..b289b726a7d 100644
--- a/arch/arm/mach-s5p64x0/clock.c
+++ b/arch/arm/mach-s5p64x0/clock.c
@@ -30,8 +30,8 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
+
+#include "common.h"
struct clksrc_clk clk_mout_apll = {
.clk = {
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
new file mode 100644
index 00000000000..fcf0778ae5c
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -0,0 +1,437 @@
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Codes for S5P64X0 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#include <asm/irq.h>
+#include <asm/proc-fns.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/adc-core.h>
+#include <plat/fb-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-irqtype.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+static const char name_s5p6440[] = "S5P6440";
+static const char name_s5p6450[] = "S5P6450";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S5P6440_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
+ .map_io = s5p6440_map_io,
+ .init_clocks = s5p6440_init_clocks,
+ .init_uarts = s5p6440_init_uarts,
+ .init = s5p64x0_init,
+ .name = name_s5p6440,
+ }, {
+ .idcode = S5P6450_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
+ .map_io = s5p6450_map_io,
+ .init_clocks = s5p6450_init_clocks,
+ .init_uarts = s5p6450_init_uarts,
+ .init = s5p64x0_init,
+ .name = name_s5p6450,
+ },
+};
+
+/* Initial IO mappings */
+
+static struct map_desc s5p64x0_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5P64X0_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S5P64X0_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S5P64X0_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S5P64X0_PA_WDT),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5P64X0_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO,
+ .pfn = __phys_to_pfn(S5P64X0_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC0,
+ .pfn = __phys_to_pfn(S5P64X0_PA_VIC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC1,
+ .pfn = __phys_to_pfn(S5P64X0_PA_VIC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc s5p6440_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S5P6440_PA_UART(0)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc s5p6450_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S5P6450_PA_UART(0)),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART + SZ_512K,
+ .pfn = __phys_to_pfn(S5P6450_PA_UART(5)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void s5p64x0_idle(void)
+{
+ unsigned long val;
+
+ if (!need_resched()) {
+ val = __raw_readl(S5P64X0_PWR_CFG);
+ val &= ~(0x3 << 5);
+ val |= (0x1 << 5);
+ __raw_writel(val, S5P64X0_PWR_CFG);
+
+ cpu_do_idle();
+ }
+ local_irq_enable();
+}
+
+/*
+ * s5p64x0_map_io
+ *
+ * register the standard CPU IO areas
+ */
+
+void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialize the io descriptors we need for initialization */
+ iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P64X0_SYS_ID);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5p6440_map_io(void)
+{
+ /* initialize any device information early */
+ s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
+
+ iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+ init_consistent_dma_size(SZ_8M);
+}
+
+void __init s5p6450_map_io(void)
+{
+ /* initialize any device information early */
+ s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
+
+ iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+ init_consistent_dma_size(SZ_8M);
+}
+
+/*
+ * s5p64x0_init_clocks
+ *
+ * register and setup the CPU clocks
+ */
+
+void __init s5p6440_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5p6440_register_clocks();
+ s5p6440_setup_clocks();
+}
+
+void __init s5p6450_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5p6450_register_clocks();
+ s5p6450_setup_clocks();
+}
+
+/*
+ * s5p64x0_init_irq
+ *
+ * register the CPU interrupts
+ */
+
+void __init s5p6440_init_irq(void)
+{
+ /* S5P6440 supports 2 VIC */
+ u32 vic[2];
+
+ /*
+ * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+ * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+ */
+ vic[0] = 0xff800ae7;
+ vic[1] = 0xffbf23e5;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+void __init s5p6450_init_irq(void)
+{
+ /* S5P6450 supports only 2 VIC */
+ u32 vic[2];
+
+ /*
+ * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
+ * VIC1 is missing IRQ VIC1[12, 14, 23]
+ */
+ vic[0] = 0xff9f1fff;
+ vic[1] = 0xff7fafff;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+struct sysdev_class s5p64x0_sysclass = {
+ .name = "s5p64x0-core",
+};
+
+static struct sys_device s5p64x0_sysdev = {
+ .cls = &s5p64x0_sysclass,
+};
+
+static int __init s5p64x0_core_init(void)
+{
+ return sysdev_class_register(&s5p64x0_sysclass);
+}
+core_initcall(s5p64x0_core_init);
+
+int __init s5p64x0_init(void)
+{
+ printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = s5p64x0_idle;
+
+ return sysdev_register(&s5p64x0_sysdev);
+}
+
+/* uart registration process */
+void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ int uart;
+
+ for (uart = 0; uart < no; uart++) {
+ s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
+ s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
+ }
+
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+#define eint_offset(irq) ((irq) - IRQ_EINT(0))
+
+static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = eint_offset(data->irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ if (offs > 15)
+ return -EINVAL;
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs / 2) * 4;
+ mask = 0x7 << shift;
+
+ ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P64X0_EINT0CON0);
+
+ /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
+
+ return 0;
+}
+
+/*
+ * s5p64x0_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
+ * the specific handlers s5p64x0_irq_demux_eintX_Y.
+ */
+static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
+{
+ u32 status = __raw_readl(S5P64X0_EINT0PEND);
+ u32 mask = __raw_readl(S5P64X0_EINT0MASK);
+ unsigned int irq;
+
+ status &= ~mask;
+ status >>= start;
+ status &= (1 << (end - start + 1)) - 1;
+
+ for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+ if (status & 1)
+ generic_handle_irq(irq);
+ status >>= 1;
+ }
+}
+
+static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(0, 3);
+}
+
+static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(4, 11);
+}
+
+static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
+ struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(12, 15);
+}
+
+static int s5p64x0_alloc_gc(void)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
+ S5P_VA_GPIO, handle_level_irq);
+ if (!gc) {
+ printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
+ "external interrupts failed\n", __func__);
+ return -EINVAL;
+ }
+
+ ct = gc->chip_types;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+ ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+ ct->chip.irq_set_wake = s3c_irqext_wake;
+ ct->regs.ack = EINT0PEND_OFFSET;
+ ct->regs.mask = EINT0MASK_OFFSET;
+ irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+ return 0;
+}
+
+static int __init s5p64x0_init_irq_eint(void)
+{
+ int ret = s5p64x0_alloc_gc();
+ irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
+ irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
+ irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
+
+ return ret;
+}
+arch_initcall(s5p64x0_init_irq_eint);
+
+void s5p64x0_restart(char mode, const char *cmd)
+{
+ if (mode != 's')
+ arch_wdt_reset();
+
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h
new file mode 100644
index 00000000000..f8a60fdc588
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/common.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S5P64X0 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5P64X0_COMMON_H
+#define __ARCH_ARM_MACH_S5P64X0_COMMON_H
+
+void s5p6440_init_irq(void);
+void s5p6450_init_irq(void);
+void s5p64x0_init_io(struct map_desc *mach_desc, int size);
+
+void s5p6440_register_clocks(void);
+void s5p6440_setup_clocks(void);
+
+void s5p6450_register_clocks(void);
+void s5p6450_setup_clocks(void);
+
+void s5p64x0_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5P6440
+
+extern int s5p64x0_init(void);
+extern void s5p6440_map_io(void);
+extern void s5p6440_init_clocks(int xtal);
+
+extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6440_init_clocks NULL
+#define s5p6440_init_uarts NULL
+#define s5p6440_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S5P6450
+
+extern int s5p64x0_init(void);
+extern void s5p6450_map_io(void);
+extern void s5p6450_init_clocks(int xtal);
+
+extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6450_init_clocks NULL
+#define s5p6450_init_uarts NULL
+#define s5p6450_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
deleted file mode 100644
index ecab40cf19a..00000000000
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/cpu.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
-#include <plat/adc-core.h>
-#include <plat/fb-core.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s5p64x0_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_GPIO,
- .pfn = __phys_to_pfn(S5P64X0_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S5P64X0_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S5P64X0_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc s5p6440_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S5P6440_PA_UART(0)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static struct map_desc s5p6450_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_UART,
- .pfn = __phys_to_pfn(S5P6450_PA_UART(0)),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_UART + SZ_512K,
- .pfn = __phys_to_pfn(S5P6450_PA_UART(5)),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-static void s5p64x0_idle(void)
-{
- unsigned long val;
-
- if (!need_resched()) {
- val = __raw_readl(S5P64X0_PWR_CFG);
- val &= ~(0x3 << 5);
- val |= (0x1 << 5);
- __raw_writel(val, S5P64X0_PWR_CFG);
-
- cpu_do_idle();
- }
- local_irq_enable();
-}
-
-/*
- * s5p64x0_map_io
- *
- * register the standard CPU IO areas
- */
-
-void __init s5p6440_map_io(void)
-{
- /* initialize any device information early */
- s3c_adc_setname("s3c64xx-adc");
- s3c_fb_setname("s5p64x0-fb");
-
- iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
- iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
- init_consistent_dma_size(SZ_8M);
-}
-
-void __init s5p6450_map_io(void)
-{
- /* initialize any device information early */
- s3c_adc_setname("s3c64xx-adc");
- s3c_fb_setname("s5p64x0-fb");
-
- iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
- iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
- init_consistent_dma_size(SZ_8M);
-}
-
-/*
- * s5p64x0_init_clocks
- *
- * register and setup the CPU clocks
- */
-
-void __init s5p6440_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5p6440_register_clocks();
- s5p6440_setup_clocks();
-}
-
-void __init s5p6450_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
- s5p6450_register_clocks();
- s5p6450_setup_clocks();
-}
-
-/*
- * s5p64x0_init_irq
- *
- * register the CPU interrupts
- */
-
-void __init s5p6440_init_irq(void)
-{
- /* S5P6440 supports 2 VIC */
- u32 vic[2];
-
- /*
- * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
- * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
- */
- vic[0] = 0xff800ae7;
- vic[1] = 0xffbf23e5;
-
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-void __init s5p6450_init_irq(void)
-{
- /* S5P6450 supports only 2 VIC */
- u32 vic[2];
-
- /*
- * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
- * VIC1 is missing IRQ VIC1[12, 14, 23]
- */
- vic[0] = 0xff9f1fff;
- vic[1] = 0xff7fafff;
-
- s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct sysdev_class s5p64x0_sysclass = {
- .name = "s5p64x0-core",
-};
-
-static struct sys_device s5p64x0_sysdev = {
- .cls = &s5p64x0_sysclass,
-};
-
-static int __init s5p64x0_core_init(void)
-{
- return sysdev_class_register(&s5p64x0_sysclass);
-}
-core_initcall(s5p64x0_core_init);
-
-int __init s5p64x0_init(void)
-{
- printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5p64x0_idle;
-
- return sysdev_register(&s5p64x0_sysdev);
-}
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
deleted file mode 100644
index 1fd9c79c7db..00000000000
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/dev-spi.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/regs-clock.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/cpu.h>
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *s5p64x0_spi_src_clks[] = {
- [S5P64X0_SPI_SRCCLK_PCLK] = "pclk",
- [S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S5P6440_GPC(0);
- break;
-
- case 1:
- base = S5P6440_GPC(4);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- s3c_gpio_cfgall_range(base, 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
- return 0;
-}
-
-static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S5P6450_GPC(0);
- break;
-
- case 1:
- base = S5P6450_GPC(4);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- s3c_gpio_cfgall_range(base, 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
- return 0;
-}
-
-static struct resource s5p64x0_spi0_resource[] = {
- [0] = {
- .start = S5P64X0_PA_SPI0,
- .end = S5P64X0_PA_SPI0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI0_TX,
- .end = DMACH_SPI0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI0_RX,
- .end = DMACH_SPI0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
- .cfg_gpio = s5p6440_spi_cfg_gpio,
- .fifo_lvl_mask = 0x1ff,
- .rx_lvl_offset = 15,
- .tx_st_done = 25,
-};
-
-static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
- .cfg_gpio = s5p6450_spi_cfg_gpio,
- .fifo_lvl_mask = 0x1ff,
- .rx_lvl_offset = 15,
- .tx_st_done = 25,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p64x0_device_spi0 = {
- .name = "s3c64xx-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource),
- .resource = s5p64x0_spi0_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource s5p64x0_spi1_resource[] = {
- [0] = {
- .start = S5P64X0_PA_SPI1,
- .end = S5P64X0_PA_SPI1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI1_TX,
- .end = DMACH_SPI1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI1_RX,
- .end = DMACH_SPI1_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI1,
- .end = IRQ_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
- .cfg_gpio = s5p6440_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 15,
- .tx_st_done = 25,
-};
-
-static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
- .cfg_gpio = s5p6450_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 15,
- .tx_st_done = 25,
-};
-
-struct platform_device s5p64x0_device_spi1 = {
- .name = "s3c64xx-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource),
- .resource = s5p64x0_spi1_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
- struct s3c64xx_spi_info *pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0
- || src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
- printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- switch (cntrlr) {
- case 0:
- if (soc_is_s5p6450())
- pd = &s5p6450_spi0_pdata;
- else
- pd = &s5p6440_spi0_pdata;
-
- s5p64x0_device_spi0.dev.platform_data = pd;
- break;
- case 1:
- if (soc_is_s5p6450())
- pd = &s5p6450_spi1_pdata;
- else
- pd = &s5p6440_spi1_pdata;
-
- s5p64x0_device_spi1.dev.platform_data = pd;
- break;
- default:
- printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
- __func__, cntrlr);
- return;
- }
-
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- pd->src_clk_name = s5p64x0_spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index 442dd4ad12d..f820c074440 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -38,176 +38,74 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-struct dma_pl330_peri s5p6440_pdma_peri[22] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_MAX,
- }, {
- .peri_id = DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- },
+u8 s5p6440_pdma_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI0_RX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_SPI1_TX,
+ DMACH_SPI1_RX,
};
struct dma_pl330_platdata s5p6440_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
- .peri = s5p6440_pdma_peri,
+ .peri_id = s5p6440_pdma_peri,
};
-struct dma_pl330_peri s5p6450_pdma_peri[32] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART4_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART4_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_USI_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_USI_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PWM,
- }, {
- .peri_id = (u8)DMACH_UART5_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART5_TX,
- .rqtype = MEMTODEV,
- },
+u8 s5p6450_pdma_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_UART4_RX,
+ DMACH_UART4_TX,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI0_RX,
+ DMACH_PCM1_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM2_TX,
+ DMACH_PCM2_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI1_RX,
+ DMACH_USI_TX,
+ DMACH_USI_RX,
+ DMACH_MAX,
+ DMACH_I2S1_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S2_TX,
+ DMACH_I2S2_RX,
+ DMACH_PWM,
+ DMACH_UART5_RX,
+ DMACH_UART5_TX,
};
struct dma_pl330_platdata s5p6450_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
- .peri = s5p6450_pdma_peri,
+ .peri_id = s5p6450_pdma_peri,
};
struct amba_device s5p64x0_device_pdma = {
@@ -227,10 +125,15 @@ struct amba_device s5p64x0_device_pdma = {
static int __init s5p64x0_dma_init(void)
{
- if (soc_is_s5p6450())
+ if (soc_is_s5p6450()) {
+ dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
- else
+ } else {
+ dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+ }
amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 53982db9d25..5b845e849b3 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -141,6 +141,8 @@
#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x))
+#define IRQ_TIMER_BASE (11)
+
/* Set the default NR_IRQS */
#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index 4d3ac8a3709..0c0175dbfa3 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -67,6 +67,8 @@
#define S3C_PA_RTC S5P64X0_PA_RTC
#define S3C_PA_WDT S5P64X0_PA_WDT
#define S3C_PA_FB S5P64X0_PA_FB
+#define S3C_PA_SPI0 S5P64X0_PA_SPI0
+#define S3C_PA_SPI1 S5P64X0_PA_SPI1
#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
#define S5P_PA_SROMC S5P64X0_PA_SROMC
diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
index 60f57532c97..cf26e0954a2 100644
--- a/arch/arm/mach-s5p64x0/include/mach/system.h
+++ b/arch/arm/mach-s5p64x0/include/mach/system.h
@@ -13,8 +13,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-#include <plat/system-reset.h>
-
static void arch_idle(void)
{
/* nothing here yet */
diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c
deleted file mode 100644
index 79833caf816..00000000000
--- a/arch/arm/mach-s5p64x0/init.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/init.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Init support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = {
- [0] = {
- .name = "pclk_low",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "uclk1",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
-/* uart registration process */
-
-void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->clocks = s5p64x0_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks);
- }
- }
-}
-
-void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- int uart;
-
- for (uart = 0; uart < no; uart++) {
- s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
- s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
- }
-
- s5p64x0_common_init_uarts(cfg, no);
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-
-void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s5p64x0_common_init_uarts(cfg, no);
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
deleted file mode 100644
index 275dc74f4a7..00000000000
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* arch/arm/mach-s5p64x0/irq-eint.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
- * http://www.samsung.com/
- *
- * Based on linux/arch/arm/mach-s3c64xx/irq-eint.c
- *
- * S5P64X0 - Interrupt handling for External Interrupts.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-irqtype.h>
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#define eint_offset(irq) ((irq) - IRQ_EINT(0))
-
-static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = eint_offset(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- if (offs > 15)
- return -EINVAL;
-
- switch (type) {
- case IRQ_TYPE_NONE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs / 2) * 4;
- mask = 0x7 << shift;
-
- ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P64X0_EINT0CON0);
-
- /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
- if (soc_is_s5p6450())
- s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
- else
- s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
-
- return 0;
-}
-
-/*
- * s5p64x0_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
- * the specific handlers s5p64x0_irq_demux_eintX_Y.
- */
-static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
-{
- u32 status = __raw_readl(S5P64X0_EINT0PEND);
- u32 mask = __raw_readl(S5P64X0_EINT0MASK);
- unsigned int irq;
-
- status &= ~mask;
- status >>= start;
- status &= (1 << (end - start + 1)) - 1;
-
- for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
- if (status & 1)
- generic_handle_irq(irq);
- status >>= 1;
- }
-}
-
-static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(0, 3);
-}
-
-static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(4, 11);
-}
-
-static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
- struct irq_desc *desc)
-{
- s5p64x0_irq_demux_eint(12, 15);
-}
-
-static int s5p64x0_alloc_gc(void)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
- S5P_VA_GPIO, handle_level_irq);
- if (!gc) {
- printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
- "external interrupts failed\n", __func__);
- return -EINVAL;
- }
-
- ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack_set_bit;
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
- ct->chip.irq_set_wake = s3c_irqext_wake;
- ct->regs.ack = EINT0PEND_OFFSET;
- ct->regs.mask = EINT0MASK_OFFSET;
- irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
- return 0;
-}
-
-static int __init s5p64x0_init_irq_eint(void)
-{
- int ret = s5p64x0_alloc_gc();
- irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
- irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
- irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
-
- return ret;
-}
-arch_initcall(s5p64x0_init_irq_eint);
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index c272c3f7d6d..34d98a1dae5 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -41,7 +41,6 @@
#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
-#include <plat/s5p6440.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -54,6 +53,8 @@
#include <plat/fb.h>
#include <plat/regs-fb.h>
+#include "common.h"
+
#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
@@ -202,7 +203,7 @@ static struct platform_pwm_backlight_data smdk6440_bl_data = {
static void __init smdk6440_map_io(void)
{
- s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
+ s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -247,4 +248,5 @@ MACHINE_START(SMDK6440, "SMDK6440")
.map_io = smdk6440_map_io,
.init_machine = smdk6440_machine_init,
.timer = &s5p_timer,
+ .restart = s5p64x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 7a470095961..135cf5d8473 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -41,7 +41,6 @@
#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
-#include <plat/s5p6450.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -54,6 +53,8 @@
#include <plat/fb.h>
#include <plat/regs-fb.h>
+#include "common.h"
+
#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
@@ -222,7 +223,7 @@ static struct platform_pwm_backlight_data smdk6450_bl_data = {
static void __init smdk6450_map_io(void)
{
- s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
+ s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(19200000);
s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -267,4 +268,5 @@ MACHINE_START(SMDK6450, "SMDK6450")
.map_io = smdk6450_map_io,
.init_machine = smdk6450_machine_init,
.timer = &s5p_timer,
+ .restart = s5p64x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c
new file mode 100644
index 00000000000..e9b84124035
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-spi.c
@@ -0,0 +1,55 @@
+/* linux/arch/arm/mach-s5p64x0/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/cpu.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x1ff,
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgall_range(S5P6450_GPC(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ else
+ s3c_gpio_cfgall_range(S5P6440_GPC(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgall_range(S5P6450_GPC(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ else
+ s3c_gpio_cfgall_range(S5P6440_GPC(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index e538a4c67e9..75a26eaf263 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -45,6 +45,11 @@ config S5PC100_SETUP_SDHCI_GPIO
help
Common setup code for SDHCI gpio.
+config S5PC100_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations.
+
config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index a5e6e608b49..118c711f74e 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -9,28 +9,24 @@ obj-m :=
obj-n :=
obj- :=
-# Core support for S5PC100 system
+# Core
-obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o
-obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o
-obj-$(CONFIG_CPU_S5PC100) += dma.o
+obj-y += common.o clock.o
-# Helper and device support
-
-obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-
-# device support
-obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-y += dma.o
# machine support
obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
# device support
+
obj-y += dev-audio.o
+
+obj-y += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S5PC100_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index 8d47709da71..247194dd366 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -27,7 +27,8 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/s5pc100.h>
+
+#include "common.h"
static struct clk s5p_clk_otgphy = {
.name = "otg_phy",
@@ -426,24 +427,6 @@ static struct clk init_clocks_off[] = {
.enable = s5pc100_d0_2_ctrl,
.ctrlbit = (1 << 1),
}, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 5),
- }, {
.name = "modemif",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
@@ -673,24 +656,6 @@ static struct clk init_clocks_off[] = {
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 8),
}, {
- .name = "spi_48m",
- .devname = "s3c64xx-spi.0",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "spi_48m",
- .devname = "s3c64xx-spi.1",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "spi_48m",
- .devname = "s3c64xx-spi.2",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 9),
- }, {
.name = "mmc_48m",
.devname = "s3c-sdhci.0",
.parent = &clk_mout_48m.clk,
@@ -711,6 +676,54 @@ static struct clk init_clocks_off[] = {
},
};
+static struct clk clk_hsmmc2 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 7),
+};
+
+static struct clk clk_hsmmc1 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 6),
+};
+
+static struct clk clk_hsmmc0 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 5),
+};
+
+static struct clk clk_48m_spi0 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.0",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 7),
+};
+
+static struct clk clk_48m_spi1 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.1",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 8),
+};
+
+static struct clk clk_48m_spi2 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.2",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 9),
+};
+
static struct clk clk_vclk54m = {
.name = "vclk_54m",
.rate = 54000000,
@@ -929,49 +942,6 @@ static struct clksrc_clk clk_sclk_spdif = {
static struct clksrc_clk clksrcs[] = {
{
.clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .ctrlbit = (1 << 4),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .ctrlbit = (1 << 5),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.2",
- .ctrlbit = (1 << 6),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 3),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_group2,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
- }, {
- .clk = {
.name = "sclk_mixer",
.ctrlbit = (1 << 6),
.enable = s5pc100_sclk0_ctrl,
@@ -1024,39 +994,6 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
}, {
.clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 12),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_mmc0,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 13),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .ctrlbit = (1 << 14),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
- }, {
- .clk = {
.name = "sclk_irda",
.ctrlbit = (1 << 10),
.enable = s5pc100_sclk0_ctrl,
@@ -1098,6 +1035,89 @@ static struct clksrc_clk clksrcs[] = {
},
};
+static struct clksrc_clk clk_sclk_uart = {
+ .clk = {
+ .name = "uclk1",
+ .ctrlbit = (1 << 3),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group2,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .ctrlbit = (1 << 12),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_mmc0,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .ctrlbit = (1 << 13),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .ctrlbit = (1 << 14),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .ctrlbit = (1 << 4),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .ctrlbit = (1 << 5),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi2 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.2",
+ .ctrlbit = (1 << 6),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
+};
+
/* Clock initialisation code */
static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
@@ -1127,6 +1147,25 @@ static struct clksrc_clk *sysclks[] = {
&clk_sclk_spdif,
};
+static struct clk *clk_cdev[] = {
+ &clk_hsmmc0,
+ &clk_hsmmc1,
+ &clk_hsmmc2,
+ &clk_48m_spi0,
+ &clk_48m_spi1,
+ &clk_48m_spi2,
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uart,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+ &clk_sclk_spi2,
+};
+
void __init_or_cpufreq s5pc100_setup_clocks(void)
{
unsigned long xtal;
@@ -1266,6 +1305,24 @@ static struct clk *clks[] __initdata = {
&clk_pcmcdclk1,
};
+static struct clk_lookup s5pc100_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2),
+ CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
+};
+
void __init s5pc100_register_clocks(void)
{
int ptr;
@@ -1277,9 +1334,16 @@ void __init s5pc100_register_clocks(void)
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup));
+
+ s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
+ s3c_disable_clocks(clk_cdev[ptr], 1);
s3c24xx_register_clock(&dummy_apb_pclk);
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/common.c
index fd2708e7d8a..73594a2fcf2 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -1,17 +1,16 @@
-/* linux/arch/arm/mach-s5pc100/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
- * Based on mach-s3c6410/cpu.c
+ * Common Codes for S5PC100
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
#include <linux/kernel.h>
#include <linux/types.h>
@@ -26,35 +25,73 @@
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <asm/irq.h>
+#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
+#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/ata-core.h>
-#include <plat/iic-core.h>
#include <plat/sdhci.h>
#include <plat/adc-core.h>
-#include <plat/onenand-core.h>
+#include <plat/ata-core.h>
#include <plat/fb-core.h>
+#include <plat/iic-core.h>
+#include <plat/onenand-core.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+static const char name_s5pc100[] = "S5PC100";
-#include <plat/s5pc100.h>
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S5PC100_CPU_ID,
+ .idmask = S5PC100_CPU_MASK,
+ .map_io = s5pc100_map_io,
+ .init_clocks = s5pc100_init_clocks,
+ .init_uarts = s5pc100_init_uarts,
+ .init = s5pc100_init,
+ .name = name_s5pc100,
+ },
+};
/* Initial IO mappings */
static struct map_desc s5pc100_iodesc[] __initdata = {
{
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5PC100_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S5PC100_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S5PC100_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S5PC100_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5PC100_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)S5P_VA_SYSTIMER,
.pfn = __phys_to_pfn(S5PC100_PA_SYSTIMER),
.length = SZ_16K,
@@ -100,15 +137,27 @@ static void s5pc100_idle(void)
local_irq_enable();
}
-/* s5pc100_map_io
+/*
+ * s5pc100_map_io
*
- * register the standard cpu IO areas
-*/
+ * register the standard CPU IO areas
+ */
-void __init s5pc100_map_io(void)
+void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
{
+ /* initialize the io descriptors we need for initialization */
iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P_VA_CHIPID);
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5pc100_map_io(void)
+{
/* initialise device information early */
s5pc100_default_sdhci0();
s5pc100_default_sdhci1();
@@ -155,7 +204,6 @@ static int __init s5pc100_core_init(void)
{
return sysdev_class_register(&s5pc100_sysclass);
}
-
core_initcall(s5pc100_core_init);
int __init s5pc100_init(void)
@@ -167,3 +215,18 @@ int __init s5pc100_init(void)
return sysdev_register(&s5pc100_sysdev);
}
+
+/* uart registration process */
+
+void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void s5pc100_restart(char mode, const char *cmd)
+{
+ if (mode != 's')
+ arch_wdt_reset();
+
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-s5pc100/common.h b/arch/arm/mach-s5pc100/common.h
new file mode 100644
index 00000000000..9fbd3ae2b40
--- /dev/null
+++ b/arch/arm/mach-s5pc100/common.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S5PC100 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H
+#define __ARCH_ARM_MACH_S5PC100_COMMON_H
+
+void s5pc100_init_io(struct map_desc *mach_desc, int size);
+void s5pc100_init_irq(void);
+
+void s5pc100_register_clocks(void);
+void s5pc100_setup_clocks(void);
+
+void s5pc100_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c
deleted file mode 100644
index e5d6c4dceb5..00000000000
--- a/arch/arm/mach-s5pc100/dev-spi.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/spi-clocks.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-#include <plat/irqs.h>
-
-static char *spi_src_clks[] = {
- [S5PC100_SPI_SRCCLK_PCLK] = "pclk",
- [S5PC100_SPI_SRCCLK_48M] = "spi_48m",
- [S5PC100_SPI_SRCCLK_SPIBUS] = "spi_bus",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5pc100_spi_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- break;
-
- case 1:
- s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- break;
-
- case 2:
- s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
- s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct resource s5pc100_spi0_resource[] = {
- [0] = {
- .start = S5PC100_PA_SPI0,
- .end = S5PC100_PA_SPI0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI0_TX,
- .end = DMACH_SPI0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI0_RX,
- .end = DMACH_SPI0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5pc100_spi0_pdata = {
- .cfg_gpio = s5pc100_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .high_speed = 1,
- .tx_st_done = 21,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_spi0 = {
- .name = "s3c64xx-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pc100_spi0_resource),
- .resource = s5pc100_spi0_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_spi0_pdata,
- },
-};
-
-static struct resource s5pc100_spi1_resource[] = {
- [0] = {
- .start = S5PC100_PA_SPI1,
- .end = S5PC100_PA_SPI1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI1_TX,
- .end = DMACH_SPI1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI1_RX,
- .end = DMACH_SPI1_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI1,
- .end = IRQ_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5pc100_spi1_pdata = {
- .cfg_gpio = s5pc100_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .high_speed = 1,
- .tx_st_done = 21,
-};
-
-struct platform_device s5pc100_device_spi1 = {
- .name = "s3c64xx-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pc100_spi1_resource),
- .resource = s5pc100_spi1_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_spi1_pdata,
- },
-};
-
-static struct resource s5pc100_spi2_resource[] = {
- [0] = {
- .start = S5PC100_PA_SPI2,
- .end = S5PC100_PA_SPI2 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI2_TX,
- .end = DMACH_SPI2_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI2_RX,
- .end = DMACH_SPI2_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI2,
- .end = IRQ_SPI2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5pc100_spi2_pdata = {
- .cfg_gpio = s5pc100_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .high_speed = 1,
- .tx_st_done = 21,
-};
-
-struct platform_device s5pc100_device_spi2 = {
- .name = "s3c64xx-spi",
- .id = 2,
- .num_resources = ARRAY_SIZE(s5pc100_spi2_resource),
- .resource = s5pc100_spi2_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_spi2_pdata,
- },
-};
-
-void __init s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
- struct s3c64xx_spi_info *pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0
- || src_clk_nr > S5PC100_SPI_SRCCLK_SPIBUS) {
- printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- switch (cntrlr) {
- case 0:
- pd = &s5pc100_spi0_pdata;
- break;
- case 1:
- pd = &s5pc100_spi1_pdata;
- break;
- case 2:
- pd = &s5pc100_spi2_pdata;
- break;
- default:
- printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
- __func__, cntrlr);
- return;
- }
-
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index 065a087f5a8..c841f4d313f 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -35,100 +35,42 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-struct dma_pl330_peri pdma0_peri[30] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_IRDA,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_AC97_MICIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMOUT,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_EXTERNAL,
- }, {
- .peri_id = (u8)DMACH_PWM,
- }, {
- .peri_id = (u8)DMACH_SPDIF,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_HSI_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_HSI_TX,
- .rqtype = MEMTODEV,
- },
+u8 pdma0_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_IRDA,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
+ DMACH_EXTERNAL,
+ DMACH_PWM,
+ DMACH_SPDIF,
+ DMACH_HSI_RX,
+ DMACH_HSI_TX,
};
struct dma_pl330_platdata s5pc100_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri = pdma0_peri,
+ .peri_id = pdma0_peri,
};
struct amba_device s5pc100_device_pdma0 = {
@@ -147,98 +89,42 @@ struct amba_device s5pc100_device_pdma0 = {
.periphid = 0x00041330,
};
-struct dma_pl330_peri pdma1_peri[30] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_IRDA,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ0,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ1,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ2,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ3,
- },
+u8 pdma1_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_IRDA,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM1_TX,
+ DMACH_MSM_REQ0,
+ DMACH_MSM_REQ1,
+ DMACH_MSM_REQ2,
+ DMACH_MSM_REQ3,
};
struct dma_pl330_platdata s5pc100_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri = pdma1_peri,
+ .peri_id = pdma1_peri,
};
struct amba_device s5pc100_device_pdma1 = {
@@ -259,7 +145,12 @@ struct amba_device s5pc100_device_pdma1 = {
static int __init s5pc100_dma_init(void)
{
+ dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+
+ dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
return 0;
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index d2eb4757381..2870f12c792 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -97,6 +97,8 @@
#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
#define IRQ_VIC_END S5P_IRQ_VIC2(31)
+#define IRQ_TIMER_BASE (11)
+
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index ccbe6b767f7..54bc4f82e17 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -100,6 +100,9 @@
#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
#define S3C_PA_WDT S5PC100_PA_WATCHDOG
+#define S3C_PA_SPI0 S5PC100_PA_SPI0
+#define S3C_PA_SPI1 S5PC100_PA_SPI1
+#define S3C_PA_SPI2 S5PC100_PA_SPI2
#define S5P_PA_CHIPID S5PC100_PA_CHIPID
#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index a9ea57c0660..afc96c29851 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,8 +11,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-#include <plat/system-reset.h>
-
static void arch_idle(void)
{
/* nothing here yet */
diff --git a/arch/arm/mach-s5pc100/init.c b/arch/arm/mach-s5pc100/init.c
deleted file mode 100644
index 19d7b523c13..00000000000
--- a/arch/arm/mach-s5pc100/init.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/s5pc100-init.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* uart registration process */
-void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 93ebe3a92d1..674d22992f3 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -43,7 +43,6 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/s5pc100.h>
#include <plat/fb.h>
#include <plat/iic.h>
#include <plat/ata.h>
@@ -54,6 +53,8 @@
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -216,7 +217,7 @@ static struct platform_pwm_backlight_data smdkc100_bl_data = {
static void __init smdkc100_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pc100_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
}
@@ -255,4 +256,5 @@ MACHINE_START(SMDKC100, "SMDKC100")
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
.timer = &s3c24xx_timer,
+ .restart = s5pc100_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
deleted file mode 100644
index 6418c6e8a7b..00000000000
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-sdhci.c
- *
- * Copyright 2008 Samsung Electronics
- *
- * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * Based on mach-s3c6410/setup-sdhci.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s5pc100_hsmmc_clksrcs[4] = {
- [0] = "hsmmc", /* HCLK */
- /* [1] = "hsmmc", - duplicate HCLK entry */
- [2] = "sclk_mmc", /* mmc_bus */
- /* [3] = "48m", - note not successfully used yet */
-};
diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c
new file mode 100644
index 00000000000..431a6f747ca
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-spi.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pc100/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .high_speed = 1,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .high_speed = 1,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .high_speed = 1,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 646057ab2e4..2cdc42e838b 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -60,6 +60,11 @@ config S5PV210_SETUP_FIMC
help
Common setup code for the camera interfaces.
+config S5PV210_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations.
+
menu "S5PC110 Machines"
config MACH_AQUILA
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 009fbe53df9..76a121dd52b 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -10,30 +10,32 @@ obj-m :=
obj-n :=
obj- :=
-# Core support for S5PV210 system
+# Core
+
+obj-y += common.o clock.o
-obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o
-obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
obj-$(CONFIG_PM) += pm.o
+obj-y += dma.o
+
# machine support
obj-$(CONFIG_MACH_AQUILA) += mach-aquila.o
-obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
-obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
obj-$(CONFIG_MACH_GONI) += mach-goni.o
+obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
+obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o
# device support
obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-y += setup-i2c0.o
obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o
-obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
+obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o
obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S5PV210_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 4c5ac7a69e9..11db6c0fb66 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -29,7 +29,8 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/s5pv210.h>
+
+#include "common.h"
static unsigned long xtal;
@@ -399,30 +400,6 @@ static struct clk init_clocks_off[] = {
.enable = s5pv210_clk_ip1_ctrl,
.ctrlbit = (1<<25),
}, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1<<16),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1<<17),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1<<18),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.3",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1<<19),
- }, {
.name = "systimer",
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
@@ -559,6 +536,38 @@ static struct clk init_clocks[] = {
},
};
+static struct clk clk_hsmmc0 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<16),
+};
+
+static struct clk clk_hsmmc1 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<17),
+};
+
+static struct clk clk_hsmmc2 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<18),
+};
+
+static struct clk clk_hsmmc3 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<19),
+};
+
static struct clk *clkset_uart_list[] = {
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
@@ -809,46 +818,6 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 },
}, {
.clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.0",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.1",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 13),
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.2",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 14),
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.3",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 15),
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
- }, {
- .clk = {
.name = "sclk_fimc",
.devname = "s5pv210-fimc.0",
.enable = s5pv210_clk_mask1_ctrl,
@@ -906,46 +875,6 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 4 },
}, {
.clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 9),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 10),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.3",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 11),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
- }, {
- .clk = {
.name = "sclk_mfc",
.devname = "s5p-mfc",
.enable = s5pv210_clk_ip0_ctrl,
@@ -983,26 +912,6 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 28, .size = 4 },
}, {
.clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 17),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 },
- }, {
- .clk = {
.name = "sclk_pwi",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 29),
@@ -1022,6 +931,147 @@ static struct clksrc_clk clksrcs[] = {
},
};
+static struct clksrc_clk clk_sclk_uart0 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.0",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart1 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.1",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 13),
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart2 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.2",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 14),
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart3 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.3",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 15),
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 9),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 10),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc3 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.3",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 11),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 },
+ };
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 17),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 },
+ };
+
+
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uart0,
+ &clk_sclk_uart1,
+ &clk_sclk_uart2,
+ &clk_sclk_uart3,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2,
+ &clk_sclk_mmc3,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+};
+
+static struct clk *clk_cdev[] = {
+ &clk_hsmmc0,
+ &clk_hsmmc1,
+ &clk_hsmmc2,
+ &clk_hsmmc3,
+};
+
/* Clock initialisation code */
static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
@@ -1261,6 +1311,25 @@ static struct clk *clks[] __initdata = {
&clk_pcmcdclk2,
};
+static struct clk_lookup s5pv210_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
+ CLKDEV_INIT("s5pv210-uart.0", "clk_uart_baud1", &clk_sclk_uart0.clk),
+ CLKDEV_INIT("s5pv210-uart.1", "clk_uart_baud1", &clk_sclk_uart1.clk),
+ CLKDEV_INIT("s5pv210-uart.2", "clk_uart_baud1", &clk_sclk_uart2.clk),
+ CLKDEV_INIT("s5pv210-uart.3", "clk_uart_baud1", &clk_sclk_uart3.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
+ CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.0", &clk_hsmmc3),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+ CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+};
+
void __init s5pv210_register_clocks(void)
{
int ptr;
@@ -1273,11 +1342,19 @@ void __init s5pv210_register_clocks(void)
for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
s3c_register_clksrc(sclk_tv[ptr], 1);
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s5pv210_clk_lookup, ARRAY_SIZE(s5pv210_clk_lookup));
+
+ s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
+ s3c_disable_clocks(clk_cdev[ptr], 1);
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/common.c
index 84ec7463323..b9adefd9838 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -1,12 +1,13 @@
-/* linux/arch/arm/mach-s5pv210/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
+ * Common Codes for S5PV210
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
#include <linux/kernel.h>
#include <linux/types.h>
@@ -21,33 +22,74 @@
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
+#include <linux/serial_core.h>
+#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/proc-fns.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
-#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/fb-core.h>
-#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
#include <plat/adc-core.h>
#include <plat/ata-core.h>
+#include <plat/fb-core.h>
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/keypad-core.h>
-#include <plat/sdhci.h>
-#include <plat/reset.h>
#include <plat/tv-core.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+static const char name_s5pv210[] = "S5PV210/S5PC110";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S5PV210_CPU_ID,
+ .idmask = S5PV210_CPU_MASK,
+ .map_io = s5pv210_map_io,
+ .init_clocks = s5pv210_init_clocks,
+ .init_uarts = s5pv210_init_uarts,
+ .init = s5pv210_init,
+ .name = name_s5pv210,
+ },
+};
/* Initial IO mappings */
static struct map_desc s5pv210_iodesc[] __initdata = {
{
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5PV210_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S5PV210_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S5PV210_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S5PV210_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5PV210_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)S5P_VA_SYSTIMER,
.pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER),
.length = SZ_4K,
@@ -108,19 +150,32 @@ static void s5pv210_idle(void)
local_irq_enable();
}
-static void s5pv210_sw_reset(void)
+void s5pv210_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
}
-/* s5pv210_map_io
+/*
+ * s5pv210_map_io
*
* register the standard cpu IO areas
-*/
+ */
-void __init s5pv210_map_io(void)
+void __init s5pv210_init_io(struct map_desc *mach_desc, int size)
{
+ /* initialize the io descriptors we need for initialization */
iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P_VA_CHIPID);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5pv210_map_io(void)
+{
init_consistent_dma_size(14 << 20);
/* initialise device information early */
@@ -186,7 +241,6 @@ static int __init s5pv210_core_init(void)
{
return sysdev_class_register(&s5pv210_sysclass);
}
-
core_initcall(s5pv210_core_init);
int __init s5pv210_init(void)
@@ -196,8 +250,12 @@ int __init s5pv210_init(void)
/* set idle function */
pm_idle = s5pv210_idle;
- /* set sw_reset function */
- s5p_reset_hook = s5pv210_sw_reset;
-
return sysdev_register(&s5pv210_sysdev);
}
+
+/* uart registration process */
+
+void __init s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h
new file mode 100644
index 00000000000..6ed2af5c751
--- /dev/null
+++ b/arch/arm/mach-s5pv210/common.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S5PV210 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5PV210_COMMON_H
+#define __ARCH_ARM_MACH_S5PV210_COMMON_H
+
+void s5pv210_init_io(struct map_desc *mach_desc, int size);
+void s5pv210_init_irq(void);
+
+void s5pv210_register_clocks(void);
+void s5pv210_setup_clocks(void);
+
+void s5pv210_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5PV210
+
+extern int s5pv210_init(void);
+extern void s5pv210_map_io(void);
+extern void s5pv210_init_clocks(int xtal);
+extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5pv210_init_clocks NULL
+#define s5pv210_init_uarts NULL
+#define s5pv210_map_io NULL
+#define s5pv210_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */
diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c
deleted file mode 100644
index eaf9a7bff7a..00000000000
--- a/arch/arm/mach-s5pv210/dev-spi.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *spi_src_clks[] = {
- [S5PV210_SPI_SRCCLK_PCLK] = "pclk",
- [S5PV210_SPI_SRCCLK_SCLK] = "sclk_spi",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S5PV210_GPB(0);
- break;
-
- case 1:
- base = S5PV210_GPB(4);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- s3c_gpio_cfgall_range(base, 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
- return 0;
-}
-
-static struct resource s5pv210_spi0_resource[] = {
- [0] = {
- .start = S5PV210_PA_SPI0,
- .end = S5PV210_PA_SPI0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI0_TX,
- .end = DMACH_SPI0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI0_RX,
- .end = DMACH_SPI0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
- .cfg_gpio = s5pv210_spi_cfg_gpio,
- .fifo_lvl_mask = 0x1ff,
- .rx_lvl_offset = 15,
- .high_speed = 1,
- .tx_st_done = 25,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pv210_device_spi0 = {
- .name = "s3c64xx-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pv210_spi0_resource),
- .resource = s5pv210_spi0_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_spi0_pdata,
- },
-};
-
-static struct resource s5pv210_spi1_resource[] = {
- [0] = {
- .start = S5PV210_PA_SPI1,
- .end = S5PV210_PA_SPI1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI1_TX,
- .end = DMACH_SPI1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI1_RX,
- .end = DMACH_SPI1_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI1,
- .end = IRQ_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
- .cfg_gpio = s5pv210_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 15,
- .high_speed = 1,
- .tx_st_done = 25,
-};
-
-struct platform_device s5pv210_device_spi1 = {
- .name = "s3c64xx-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pv210_spi1_resource),
- .resource = s5pv210_spi1_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_spi1_pdata,
- },
-};
-
-void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
- struct s3c64xx_spi_info *pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0
- || src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) {
- printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- switch (cntrlr) {
- case 0:
- pd = &s5pv210_spi0_pdata;
- break;
- case 1:
- pd = &s5pv210_spi1_pdata;
- break;
- default:
- printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
- __func__, cntrlr);
- return;
- }
-
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 86b749c18b7..a6113e0267f 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -35,90 +35,40 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-struct dma_pl330_peri pdma0_peri[28] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_AC97_MICIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMOUT,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_PWM,
- }, {
- .peri_id = (u8)DMACH_SPDIF,
- .rqtype = MEMTODEV,
- },
+u8 pdma0_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_MAX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
+ DMACH_MAX,
+ DMACH_PWM,
+ DMACH_SPDIF,
};
struct dma_pl330_platdata s5pv210_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri = pdma0_peri,
+ .peri_id = pdma0_peri,
};
struct amba_device s5pv210_device_pdma0 = {
@@ -137,102 +87,44 @@ struct amba_device s5pv210_device_pdma0 = {
.periphid = 0x00041330,
};
-struct dma_pl330_peri pdma1_peri[32] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ0,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ1,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ2,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ3,
- }, {
- .peri_id = (u8)DMACH_PCM2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM2_TX,
- .rqtype = MEMTODEV,
- },
+u8 pdma1_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_MAX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM1_TX,
+ DMACH_MSM_REQ0,
+ DMACH_MSM_REQ1,
+ DMACH_MSM_REQ2,
+ DMACH_MSM_REQ3,
+ DMACH_PCM2_RX,
+ DMACH_PCM2_TX,
};
struct dma_pl330_platdata s5pv210_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri = pdma1_peri,
+ .peri_id = pdma1_peri,
};
struct amba_device s5pv210_device_pdma1 = {
@@ -253,7 +145,12 @@ struct amba_device s5pv210_device_pdma1 = {
static int __init s5pv210_dma_init(void)
{
+ dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+
+ dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
return 0;
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 5e0de3a31f3..e777e010ed2 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -118,6 +118,8 @@
#define IRQ_MDNIE3 S5P_IRQ_VIC3(8)
#define IRQ_VIC_END S5P_IRQ_VIC3(31)
+#define IRQ_TIMER_BASE (11)
+
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 7ff609f1568..89c34b8f73b 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -109,6 +109,8 @@
#define S3C_PA_RTC S5PV210_PA_RTC
#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG
#define S3C_PA_WDT S5PV210_PA_WATCHDOG
+#define S3C_PA_SPI0 S5PV210_PA_SPI0
+#define S3C_PA_SPI1 S5PV210_PA_SPI1
#define S5P_PA_CHIPID S5PV210_PA_CHIPID
#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
index af8a200b213..bf288ced860 100644
--- a/arch/arm/mach-s5pv210/include/mach/system.h
+++ b/arch/arm/mach-s5pv210/include/mach/system.h
@@ -13,8 +13,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
-#include <plat/system-reset.h>
-
static void arch_idle(void)
{
/* nothing here yet */
diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c
deleted file mode 100644
index 4865ae2c475..00000000000
--- a/arch/arm/mach-s5pv210/init.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5pv210.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
- [0] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
-/* uart registration process */
-void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->clocks = s5pv210_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
- }
- }
-
- s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 71ca95604d6..5e734d025a6 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -33,7 +33,6 @@
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
@@ -42,6 +41,8 @@
#include <plat/s5p-time.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -596,8 +597,7 @@ static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
static void aquila_setup_sdhci(void)
{
- gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
- gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
+ gpio_request_one(AQUILA_EXT_FLASH_EN, GPIOF_OUT_INIT_HIGH, "FLASH_EN");
s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
@@ -645,7 +645,7 @@ static void __init aquila_sound_init(void)
static void __init aquila_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -685,4 +685,5 @@ MACHINE_START(AQUILA, "Aquila")
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
.timer = &s5p_timer,
+ .restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 448fd9ea96f..ff915261043 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -38,7 +38,6 @@
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
@@ -55,6 +54,8 @@
#include <media/s5p_fimc.h>
#include <media/noon010pc30.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -228,8 +229,7 @@ static void __init goni_radio_init(void)
i2c1_devs[0].irq = gpio_to_irq(gpio);
gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */
- gpio_request(gpio, "FM_RST");
- gpio_direction_output(gpio, 1);
+ gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "FM_RST");
}
/* TSP */
@@ -265,8 +265,7 @@ static void __init goni_tsp_init(void)
int gpio;
gpio = S5PV210_GPJ1(3); /* XMSMADDR_11 */
- gpio_request(gpio, "TSP_LDO_ON");
- gpio_direction_output(gpio, 1);
+ gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
gpio_export(gpio, 0);
gpio = S5PV210_GPJ0(5); /* XMSMADDR_5 */
@@ -891,7 +890,7 @@ static void __init goni_sound_init(void)
static void __init goni_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -962,4 +961,5 @@ MACHINE_START(GONI, "GONI")
.init_machine = goni_machine_init,
.timer = &s5p_timer,
.reserve = &goni_reserve,
+ .restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index c2531ffc720..9405da4ae3a 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -25,7 +25,6 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/ata.h>
@@ -33,6 +32,8 @@
#include <plat/pm.h>
#include <plat/s5p-time.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -110,7 +111,7 @@ static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = {
static void __init smdkc110_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -143,4 +144,5 @@ MACHINE_START(SMDKC110, "SMDKC110")
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
.timer = &s5p_timer,
+ .restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 3ac9e57d970..f6feef4dce6 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -34,7 +34,6 @@
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/gpio-cfg.h>
-#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
@@ -48,6 +47,8 @@
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -154,15 +155,12 @@ static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
{
if (power) {
#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request(S5PV210_GPD0(3), "GPD0");
- gpio_direction_output(S5PV210_GPD0(3), 1);
+ gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_HIGH, "GPD0");
gpio_free(S5PV210_GPD0(3));
#endif
/* fire nRESET on power up */
- gpio_request(S5PV210_GPH0(6), "GPH0");
-
- gpio_direction_output(S5PV210_GPH0(6), 1);
+ gpio_request_one(S5PV210_GPH0(6), GPIOF_OUT_INIT_HIGH, "GPH0");
gpio_set_value(S5PV210_GPH0(6), 0);
mdelay(10);
@@ -173,8 +171,7 @@ static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
gpio_free(S5PV210_GPH0(6));
} else {
#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request(S5PV210_GPD0(3), "GPD0");
- gpio_direction_output(S5PV210_GPD0(3), 0);
+ gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_LOW, "GPD0");
gpio_free(S5PV210_GPD0(3));
#endif
}
@@ -279,7 +276,7 @@ static struct platform_pwm_backlight_data smdkv210_bl_data = {
static void __init smdkv210_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
@@ -321,4 +318,5 @@ MACHINE_START(SMDKV210, "SMDKV210")
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
.timer = &s5p_timer,
+ .restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index df70fcb3451..74e99bc0dc9 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -24,12 +24,13 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
-#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
#include <plat/s5p-time.h>
+#include "common.h"
+
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -103,7 +104,7 @@ static struct i2c_board_info torbreck_i2c_devs2[] __initdata = {
static void __init torbreck_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
@@ -132,4 +133,5 @@ MACHINE_START(TORBRECK, "TORBRECK")
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
.timer = &s5p_timer,
+ .restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
deleted file mode 100644
index 6b8ccc4d35f..00000000000
--- a/arch/arm/mach-s5pv210/setup-sdhci.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/setup-sdhci.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s5pv210_hsmmc_clksrcs[4] = {
- [0] = "hsmmc", /* HCLK */
- /* [1] = "hsmmc", - duplicate HCLK entry */
- [2] = "sclk_mmc", /* mmc_bus */
- /* [3] = NULL, - reserved */
-};
diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c
new file mode 100644
index 00000000000..f43c5048a37
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-spi.c
@@ -0,0 +1,51 @@
+/* linux/arch/arm/mach-s5pv210/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
+ .fifo_lvl_mask = 0x1ff,
+ .rx_lvl_offset = 15,
+ .high_speed = 1,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV210_GPB(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 15,
+ .high_speed = 1,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV210_GPB(6), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 3dd133f1841..6b93e200bca 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -455,4 +455,5 @@ MACHINE_START(ASSABET, "Intel-Assabet")
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index bda83e1ab07..b07a2c024cb 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -309,4 +309,5 @@ MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 7f3da4b11ec..11bb6d0b9be 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -139,4 +139,5 @@ MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
.init_irq = cerf_init_irq,
.timer = &sa1100_timer,
.init_machine = cerf_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 2965cc9d424..b9060e236de 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -387,4 +387,5 @@ MACHINE_START(COLLIE, "Sharp-Collie")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = collie_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 5fa5ae1f39e..bb10ee2cb89 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -126,6 +126,17 @@ static void sa1100_power_off(void)
PMCR = PMCR_SF;
}
+void sa11x0_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* Jump into ROM at address 0 */
+ soft_restart(0);
+ } else {
+ /* Use on-chip reset capability */
+ RSRR = RSRR_SWR;
+ }
+}
+
static void sa11x0_register_device(struct platform_device *dev, void *data)
{
int err;
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index b7a9a601c2d..33268cf6be3 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -10,6 +10,7 @@ extern struct sys_timer sa1100_timer;
extern void __init sa1100_map_io(void);
extern void __init sa1100_init_irq(void);
extern void __init sa1100_init_gpio(void);
+extern void sa11x0_restart(char, const char *);
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index b30733a2b82..1e6b3c105ba 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -89,5 +89,6 @@ MACHINE_START(H3100, "Compaq iPAQ H3100")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3100_mach_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6fd324d9238..6b58e7460ec 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -130,5 +130,6 @@ MACHINE_START(H3600, "Compaq iPAQ H3600")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3600_mach_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 30f4a551b8e..c01bb36db94 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -200,4 +200,5 @@ MACHINE_START(HACKKIT, "HackKit Cpu Board")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = hackkit_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index 345d35b7450..e17b208f76d 100644
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -3,20 +3,7 @@
*
* Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
*/
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (mode == 's') {
- /* Jump into ROM at address 0 */
- soft_restart(0);
- } else {
- /* Use on-chip reset capability */
- RSRR = RSRR_SWR;
- }
-}
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 77198fe02bc..ee121d6f048 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -373,4 +373,5 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 5bc59d0947b..af4e2761f3d 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -66,4 +66,5 @@ MACHINE_START(LART, "LART")
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
.timer = &sa1100_timer,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 032f3881d14..85f6ee67222 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -19,6 +19,7 @@
#include <asm/mach-types.h>
#include <asm/setup.h>
+#include <asm/page.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
@@ -116,4 +117,5 @@ MACHINE_START(NANOENGINE, "BSE nanoEngine")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = nanoengine_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 65161f2bea2..9307df05353 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -150,4 +150,5 @@ MACHINE_START(PLEB, "PLEB")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = pleb_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 1cccbf5b9e9..318b2b766a0 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -87,4 +87,5 @@ MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = shannon_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 4790f3f3d00..e17c04d6e32 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -396,4 +396,5 @@ MACHINE_START(SIMPAD, "Simpad")
.map_io = simpad_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index fa6602491d5..69e33535dee 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -12,7 +12,6 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/sched.h> /* just for sched_clock() - funny that */
#include <linux/timex.h>
#include <linux/clockchips.h>
@@ -20,29 +19,9 @@
#include <asm/sched_clock.h>
#include <mach/hardware.h>
-/*
- * This is the SA11x0 sched_clock implementation.
- */
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 3.6864MHz,
- * NSEC_PER_SEC, 60).
- * This gives a resolution of about 271ns and a wrap period of about 19min.
- */
-#define SC_MULT 2275555556u
-#define SC_SHIFT 23
-
-unsigned long long notrace sched_clock(void)
-{
- u32 cyc = OSCR;
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-static void notrace sa1100_update_sched_clock(void)
+static u32 notrace sa1100_read_sched_clock(void)
{
- u32 cyc = OSCR;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return OSCR;
}
#define MIN_OSCR_DELTA 2
@@ -109,8 +88,7 @@ static void __init sa1100_timer_init(void)
OIER = 0;
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
- init_fixed_sched_clock(&cd, sa1100_update_sched_clock, 32,
- 3686400, SC_MULT, SC_SHIFT);
+ setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4);
ckevt_sa1100_osmr0.max_delta_ns =
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index f4b25d875f3..a851c254ad6 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -26,7 +26,7 @@
#define ROMCARD_SIZE 0x08000000
#define ROMCARD_START 0x10000000
-void arch_reset(char mode, const char *cmd)
+static void shark_restart(char mode, const char *cmd)
{
short temp;
/* Reset the Machine via pc[3] of the sequoia chipset */
@@ -156,4 +156,5 @@ MACHINE_START(SHARK, "Shark")
.init_irq = shark_init_irq,
.timer = &shark_timer,
.dma_zone_size = SZ_4M,
+ .restart = shark_restart,
MACHINE_END
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
index 21c373b30bb..1b2f2c5050a 100644
--- a/arch/arm/mach-shark/include/mach/system.h
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -6,9 +6,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-/* Found in arch/mach-shark/core.c */
-extern void arch_reset(char mode, const char *cmd);
-
static inline void arch_idle(void)
{
}
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 202c3c6ec9d..a4e6ca04e31 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -466,8 +466,6 @@ static struct map_desc ag5evm_io_desc[] __initdata = {
static void __init ag5evm_map_io(void)
{
iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
- /* DMA memory at 0xf6000000 - 0xffdfffff */
- init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh73a0_add_early_devices();
@@ -607,6 +605,7 @@ struct sys_timer ag5evm_timer = {
MACHINE_START(AG5EVM, "ag5evm")
.map_io = ag5evm_map_io,
+ .nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = ag5evm_init,
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 4c865ece9ac..6a6f9f7568c 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1172,8 +1172,6 @@ static struct map_desc ap4evb_io_desc[] __initdata = {
static void __init ap4evb_map_io(void)
{
iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
- /* DMA memory at 0xf6000000 - 0xffdfffff */
- init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 8b620bf0622..72d557281b1 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -261,8 +261,6 @@ static struct map_desc g3evm_io_desc[] __initdata = {
static void __init g3evm_map_io(void)
{
iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
- /* DMA memory at 0xf6000000 - 0xffdfffff */
- init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7367_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 7719ddc5f59..2220b885cff 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -275,8 +275,6 @@ static struct map_desc g4evm_io_desc[] __initdata = {
static void __init g4evm_map_io(void)
{
iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
- /* DMA memory at 0xf6000000 - 0xffdfffff */
- init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7377_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 1b4439d3f9d..857ceeec1bb 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -33,6 +33,7 @@
#include <linux/input/sh_keysc.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
+#include <linux/platform_data/leds-renesas-tpu.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mfd/tmio.h>
@@ -56,7 +57,7 @@ static struct resource smsc9220_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gic_spi(33), /* PINTA2 @ PORT144 */
+ .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */
.flags = IORESOURCE_IRQ,
},
};
@@ -157,10 +158,6 @@ static struct platform_device gpio_keys_device = {
#define GPIO_LED(n, g) { .name = n, .gpio = g }
static struct gpio_led gpio_leds[] = {
- GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */
- GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */
- GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */
- GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */
GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
@@ -179,6 +176,119 @@ static struct platform_device gpio_leds_device = {
},
};
+/* TPU LED */
+static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
+ .name = "V2513",
+ .pin_gpio_fn = GPIO_FN_TPU1TO2,
+ .pin_gpio = GPIO_PORT153,
+ .channel_offset = 0x90,
+ .timer_bit = 2,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu12_resources[] = {
+ [0] = {
+ .name = "TPU12",
+ .start = 0xe6610090,
+ .end = 0xe66100b5,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu12_device = {
+ .name = "leds-renesas-tpu",
+ .id = 12,
+ .dev = {
+ .platform_data = &led_renesas_tpu12_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu12_resources),
+ .resource = tpu12_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
+ .name = "V2514",
+ .pin_gpio_fn = GPIO_FN_TPU4TO1,
+ .pin_gpio = GPIO_PORT199,
+ .channel_offset = 0x50,
+ .timer_bit = 1,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu41_resources[] = {
+ [0] = {
+ .name = "TPU41",
+ .start = 0xe6640050,
+ .end = 0xe6640075,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu41_device = {
+ .name = "leds-renesas-tpu",
+ .id = 41,
+ .dev = {
+ .platform_data = &led_renesas_tpu41_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu41_resources),
+ .resource = tpu41_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
+ .name = "V2515",
+ .pin_gpio_fn = GPIO_FN_TPU2TO1,
+ .pin_gpio = GPIO_PORT197,
+ .channel_offset = 0x50,
+ .timer_bit = 1,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu21_resources[] = {
+ [0] = {
+ .name = "TPU21",
+ .start = 0xe6620050,
+ .end = 0xe6620075,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu21_device = {
+ .name = "leds-renesas-tpu",
+ .id = 21,
+ .dev = {
+ .platform_data = &led_renesas_tpu21_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu21_resources),
+ .resource = tpu21_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
+ .name = "KEYLED",
+ .pin_gpio_fn = GPIO_FN_TPU3TO0,
+ .pin_gpio = GPIO_PORT163,
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .max_brightness = 1000,
+};
+
+static struct resource tpu30_resources[] = {
+ [0] = {
+ .name = "TPU30",
+ .start = 0xe6630010,
+ .end = 0xe6630035,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device leds_tpu30_device = {
+ .name = "leds-renesas-tpu",
+ .id = 30,
+ .dev = {
+ .platform_data = &led_renesas_tpu30_pdata,
+ },
+ .num_resources = ARRAY_SIZE(tpu30_resources),
+ .resource = tpu30_resources,
+};
+
/* MMCIF */
static struct resource mmcif_resources[] = {
[0] = {
@@ -291,6 +401,10 @@ static struct platform_device *kota2_devices[] __initdata = {
&keysc_device,
&gpio_keys_device,
&gpio_leds_device,
+ &leds_tpu12_device,
+ &leds_tpu41_device,
+ &leds_tpu21_device,
+ &leds_tpu30_device,
&mmcif_device,
&sdhi0_device,
&sdhi1_device,
@@ -317,18 +431,6 @@ static void __init kota2_map_io(void)
shmobile_setup_console();
}
-#define PINTER0A 0xe69000a0
-#define PINTCR0A 0xe69000b0
-
-void __init kota2_init_irq(void)
-{
- sh73a0_init_irq();
-
- /* setup PINT: enable PINTA2 as active low */
- __raw_writel(1 << 29, PINTER0A);
- __raw_writew(2 << 10, PINTCR0A);
-}
-
static void __init kota2_init(void)
{
sh73a0_pinmux_init();
@@ -447,7 +549,8 @@ struct sys_timer kota2_timer = {
MACHINE_START(KOTA2, "kota2")
.map_io = kota2_map_io,
- .init_irq = kota2_init_irq,
+ .nr_irqs = NR_IRQS_LEGACY,
+ .init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kota2_init,
.timer = &kota2_timer,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9c5e598e0e3..ed525668739 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1390,8 +1390,6 @@ static struct map_desc mackerel_io_desc[] __initdata = {
static void __init mackerel_map_io(void)
{
iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
- /* DMA memory at 0xf6000000 - 0xffdfffff */
- init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 61a846bb30f..1370a89ca35 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -113,6 +113,12 @@ static struct clk main_clk = {
.ops = &main_clk_ops,
};
+/* Divide Main clock by two */
+static struct clk main_div2_clk = {
+ .ops = &div2_clk_ops,
+ .parent = &main_clk,
+};
+
/* PLL0, PLL1, PLL2, PLL3 */
static unsigned long pll_recalc(struct clk *clk)
{
@@ -181,6 +187,7 @@ static struct clk *main_clks[] = {
&extal1_div2_clk,
&extal2_div2_clk,
&main_clk,
+ &main_div2_clk,
&pll0_clk,
&pll1_clk,
&pll2_clk,
@@ -243,7 +250,7 @@ static struct clk div6_clks[DIV6_NR] = {
[DIV6_VCK1] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR1, 0),
[DIV6_VCK2] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR2, 0),
[DIV6_VCK3] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR3, 0),
- [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, 0),
+ [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, CLK_ENABLE_ON_INIT),
[DIV6_FLCTL] = SH_CLK_DIV6(&pll1_div2_clk, FLCKCR, 0),
[DIV6_SDHI0] = SH_CLK_DIV6(&pll1_div2_clk, SD0CKCR, 0),
[DIV6_SDHI1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0),
@@ -268,6 +275,7 @@ enum { MSTP001,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
MSTP314, MSTP313, MSTP312, MSTP311,
+ MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
MSTP_NR };
@@ -301,6 +309,10 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
+ [MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
+ [MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
+ [MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
+ [MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */
[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
@@ -350,6 +362,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
+ CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
index 7bf0890e16b..de795b42232 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -12,8 +12,6 @@
#include <linux/kernel.h>
#include <linux/errno.h>
-
-#define ARCH_NR_GPIOS 1024
#include <linux/sh_pfc.h>
#ifdef CONFIG_GPIOLIB
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index b8f31c3935f..14276e5a98d 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -42,6 +42,8 @@ void __init spear3xx_map_io(void);
void __init spear3xx_init_irq(void);
void __init spear3xx_init(void);
+void spear_restart(char, const char *);
+
/* pad mux declarations */
#define PMX_FIRDA_MASK (1 << 14)
#define PMX_I2C_MASK (1 << 13)
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index 61068ba6792..3462ab9d612 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -71,4 +71,5 @@ MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
.handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear300_evb_init,
+ .restart = spear_restart,
MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index 7903abe92bf..f92c4993f65 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -77,4 +77,5 @@ MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
.handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear310_evb_init,
+ .restart = spear_restart,
MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index e9751f97093..105334ab702 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -75,4 +75,5 @@ MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
.handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear320_evb_init,
+ .restart = spear_restart,
MACHINE_END
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
index 183f0238c5e..116b99301cf 100644
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -41,6 +41,8 @@ void __init spear6xx_init(void);
void __init spear600_init(void);
void __init spear6xx_clk_init(void);
+void spear_restart(char, const char *);
+
/* Add spear600 machine device structure declarations here */
#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index ff139ed0a61..c6e4254741c 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -50,4 +50,5 @@ MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
.handle_irq = vic_handle_irq,
.timer = &spear6xx_timer,
.init_machine = spear600_evb_init,
+ .restart = spear_restart,
MACHINE_END
diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig
deleted file mode 100644
index ad86415d157..00000000000
--- a/arch/arm/mach-tcc8k/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-if ARCH_TCC8K
-
-comment "TCC8000 systems:"
-
-config MACH_TCC8000_SDK
- bool "Telechips TCC8000-SDK development kit"
- default y
- help
- Support for the Telechips TCC8000-SDK board.
-
-endif
diff --git a/arch/arm/mach-tcc8k/Makefile b/arch/arm/mach-tcc8k/Makefile
deleted file mode 100644
index 9bacf31e49b..00000000000
--- a/arch/arm/mach-tcc8k/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for TCC8K boards and common files.
-#
-
-# Common support
-obj-y += clock.o irq.o time.o io.o devices.o
-
-# Board specific support
-obj-$(CONFIG_MACH_TCC8000_SDK) += board-tcc8000-sdk.o
diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot
deleted file mode 100644
index 5e02d4156b0..00000000000
--- a/arch/arm/mach-tcc8k/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y += 0x20008000
-params_phys-y := 0x20000100
-initrd_phys-y := 0x20800000
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
deleted file mode 100644
index 777a5bb9eed..00000000000
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/clock.h>
-#include <mach/tcc-nand.h>
-#include <mach/tcc8k-regs.h>
-
-#include "common.h"
-
-#define XI_FREQUENCY 12000000
-#define XTI_FREQUENCY 32768
-
-#ifdef CONFIG_MTD_NAND_TCC
-/* NAND */
-static struct tcc_nand_platform_data tcc8k_sdk_nand_data = {
- .width = 1,
- .hw_ecc = 0,
-};
-#endif
-
-static void __init tcc8k_init(void)
-{
-#ifdef CONFIG_MTD_NAND_TCC
- tcc_nand_device.dev.platform_data = &tcc8k_sdk_nand_data;
- platform_device_register(&tcc_nand_device);
-#endif
-}
-
-static void __init tcc8k_init_timer(void)
-{
- tcc_clocks_init(XI_FREQUENCY, XTI_FREQUENCY);
-}
-
-static struct sys_timer tcc8k_timer = {
- .init = tcc8k_init_timer,
-};
-
-static void __init tcc8k_map_io(void)
-{
- tcc8k_map_common_io();
-
- /* set PLL0 clock to 96MHz, adapt UART0 divisor */
- __raw_writel(0x00026003, CKC_BASE + PLL0CFG_OFFS);
- __raw_writel(0x10000001, CKC_BASE + ACLKUART0_OFFS);
-
- /* set PLL1 clock to 192MHz */
- __raw_writel(0x00016003, CKC_BASE + PLL1CFG_OFFS);
-
- /* set PLL2 clock to 48MHz */
- __raw_writel(0x00036003, CKC_BASE + PLL2CFG_OFFS);
-
- /* with CPU freq higher than 150 MHz, need extra DTCM wait */
- __raw_writel(0x00000001, SCFG_BASE + DTCMWAIT_OFFS);
-
- /* PLL locking time as specified */
- udelay(300);
-}
-
-MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
- .atag_offset = 0x100,
- .map_io = tcc8k_map_io,
- .init_irq = tcc8k_init_irq,
- .init_machine = tcc8k_init,
- .timer = &tcc8k_timer,
-MACHINE_END
diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c
deleted file mode 100644
index e7cdae5c77a..00000000000
--- a/arch/arm/mach-tcc8k/clock.c
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- * Lowlevel clock handling for Telechips TCC8xxx SoCs
- *
- * Copyright (C) 2010 by Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/irqs.h>
-#include <mach/tcc8k-regs.h>
-
-#include "common.h"
-
-#define BCLKCTR0 (CKC_BASE + BCLKCTR0_OFFS)
-#define BCLKCTR1 (CKC_BASE + BCLKCTR1_OFFS)
-
-#define ACLKREF (CKC_BASE + ACLKREF_OFFS)
-#define ACLKUART0 (CKC_BASE + ACLKUART0_OFFS)
-#define ACLKUART1 (CKC_BASE + ACLKUART1_OFFS)
-#define ACLKUART2 (CKC_BASE + ACLKUART2_OFFS)
-#define ACLKUART3 (CKC_BASE + ACLKUART3_OFFS)
-#define ACLKUART4 (CKC_BASE + ACLKUART4_OFFS)
-#define ACLKI2C (CKC_BASE + ACLKI2C_OFFS)
-#define ACLKADC (CKC_BASE + ACLKADC_OFFS)
-#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS)
-#define ACLKLCD (CKC_BASE + ACLKLCD_OFFS)
-#define ACLKSDH0 (CKC_BASE + ACLKSDH0_OFFS)
-#define ACLKSDH1 (CKC_BASE + ACLKSDH1_OFFS)
-#define ACLKSPI0 (CKC_BASE + ACLKSPI0_OFFS)
-#define ACLKSPI1 (CKC_BASE + ACLKSPI1_OFFS)
-#define ACLKSPDIF (CKC_BASE + ACLKSPDIF_OFFS)
-#define ACLKC3DEC (CKC_BASE + ACLKC3DEC_OFFS)
-#define ACLKCAN0 (CKC_BASE + ACLKCAN0_OFFS)
-#define ACLKCAN1 (CKC_BASE + ACLKCAN1_OFFS)
-#define ACLKGSB0 (CKC_BASE + ACLKGSB0_OFFS)
-#define ACLKGSB1 (CKC_BASE + ACLKGSB1_OFFS)
-#define ACLKGSB2 (CKC_BASE + ACLKGSB2_OFFS)
-#define ACLKGSB3 (CKC_BASE + ACLKGSB3_OFFS)
-#define ACLKTCT (CKC_BASE + ACLKTCT_OFFS)
-#define ACLKTCX (CKC_BASE + ACLKTCX_OFFS)
-#define ACLKTCZ (CKC_BASE + ACLKTCZ_OFFS)
-
-#define ACLK_MAX_DIV (0xfff + 1)
-
-/* Crystal frequencies */
-static unsigned long xi_rate, xti_rate;
-
-static void __iomem *pll_cfg_addr(int pll)
-{
- switch (pll) {
- case 0: return (CKC_BASE + PLL0CFG_OFFS);
- case 1: return (CKC_BASE + PLL1CFG_OFFS);
- case 2: return (CKC_BASE + PLL2CFG_OFFS);
- default:
- BUG();
- }
-}
-
-static int pll_enable(int pll, int enable)
-{
- u32 reg;
- void __iomem *addr = pll_cfg_addr(pll);
-
- reg = __raw_readl(addr);
- if (enable)
- reg &= ~PLLxCFG_PD;
- else
- reg |= PLLxCFG_PD;
-
- __raw_writel(reg, addr);
- return 0;
-}
-
-static int xi_enable(int enable)
-{
- u32 reg;
-
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- if (enable)
- reg |= CLKCTRL_XE;
- else
- reg &= ~CLKCTRL_XE;
-
- __raw_writel(reg, CKC_BASE + CLKCTRL_OFFS);
- return 0;
-}
-
-static int root_clk_enable(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return pll_enable(0, 1);
- case CLK_SRC_PLL1: return pll_enable(1, 1);
- case CLK_SRC_PLL2: return pll_enable(2, 1);
- case CLK_SRC_XI: return xi_enable(1);
- default:
- BUG();
- }
- return 0;
-}
-
-static int root_clk_disable(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return pll_enable(0, 0);
- case CLK_SRC_PLL1: return pll_enable(1, 0);
- case CLK_SRC_PLL2: return pll_enable(2, 0);
- case CLK_SRC_XI: return xi_enable(0);
- default:
- BUG();
- }
- return 0;
-}
-
-static int enable_clk(struct clk *clk)
-{
- u32 reg;
-
- if (clk->root_id != CLK_SRC_NOROOT)
- return root_clk_enable(clk->root_id);
-
- if (clk->aclkreg) {
- reg = __raw_readl(clk->aclkreg);
- reg |= ACLK_EN;
- __raw_writel(reg, clk->aclkreg);
- }
- if (clk->bclkctr) {
- reg = __raw_readl(clk->bclkctr);
- reg |= 1 << clk->bclk_shift;
- __raw_writel(reg, clk->bclkctr);
- }
- return 0;
-}
-
-static void disable_clk(struct clk *clk)
-{
- u32 reg;
-
- if (clk->root_id != CLK_SRC_NOROOT) {
- root_clk_disable(clk->root_id);
- return;
- }
-
- if (clk->bclkctr) {
- reg = __raw_readl(clk->bclkctr);
- reg &= ~(1 << clk->bclk_shift);
- __raw_writel(reg, clk->bclkctr);
- }
- if (clk->aclkreg) {
- reg = __raw_readl(clk->aclkreg);
- reg &= ~ACLK_EN;
- __raw_writel(reg, clk->aclkreg);
- }
-}
-
-static unsigned long get_rate_pll(int pll)
-{
- u32 reg;
- unsigned long s, m, p;
- void __iomem *addr = pll_cfg_addr(pll);
-
- reg = __raw_readl(addr);
- s = (reg >> 16) & 0x07;
- m = (reg >> 8) & 0xff;
- p = reg & 0x3f;
-
- return (m * xi_rate) / (p * (1 << s));
-}
-
-static unsigned long get_rate_pll_div(int pll)
-{
- u32 reg;
- unsigned long div = 0;
- void __iomem *addr;
-
- switch (pll) {
- case 0:
- addr = CKC_BASE + CLKDIVC0_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC0_P0E)
- div = (reg >> 24) & 0x3f;
- break;
- case 1:
- addr = CKC_BASE + CLKDIVC0_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC0_P1E)
- div = (reg >> 16) & 0x3f;
- break;
- case 2:
- addr = CKC_BASE + CLKDIVC1_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC1_P2E)
- div = reg & 0x3f;
- break;
- }
- return get_rate_pll(pll) / (div + 1);
-}
-
-static unsigned long get_rate_xi_div(void)
-{
- unsigned long div = 0;
- u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
-
- if (reg & CLKDIVC0_XE)
- div = (reg >> 8) & 0x3f;
-
- return xi_rate / (div + 1);
-}
-
-static unsigned long get_rate_xti_div(void)
-{
- unsigned long div = 0;
- u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
-
- if (reg & CLKDIVC0_XTE)
- div = reg & 0x3f;
-
- return xti_rate / (div + 1);
-}
-
-static unsigned long root_clk_get_rate(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return get_rate_pll(0);
- case CLK_SRC_PLL1: return get_rate_pll(1);
- case CLK_SRC_PLL2: return get_rate_pll(2);
- case CLK_SRC_PLL0DIV: return get_rate_pll_div(0);
- case CLK_SRC_PLL1DIV: return get_rate_pll_div(1);
- case CLK_SRC_PLL2DIV: return get_rate_pll_div(2);
- case CLK_SRC_XI: return xi_rate;
- case CLK_SRC_XTI: return xti_rate;
- case CLK_SRC_XIDIV: return get_rate_xi_div();
- case CLK_SRC_XTIDIV: return get_rate_xti_div();
- default: return 0;
- }
-}
-
-static unsigned long aclk_get_rate(struct clk *clk)
-{
- u32 reg;
- unsigned long div;
- unsigned int src;
-
- reg = __raw_readl(clk->aclkreg);
- div = reg & 0x0fff;
- src = (reg >> ACLK_SEL_SHIFT) & CLK_SRC_MASK;
- return root_clk_get_rate(src) / (div + 1);
-}
-
-static unsigned long aclk_best_div(struct clk *clk, unsigned long rate)
-{
- unsigned long div, src, freq, r1, r2;
-
- if (!rate)
- return ACLK_MAX_DIV;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
- freq = root_clk_get_rate(src);
- div = freq / rate;
- if (!div)
- return 1;
- if (div >= ACLK_MAX_DIV)
- return ACLK_MAX_DIV;
- r1 = freq / div;
- r2 = freq / (div + 1);
- if ((rate - r2) < (r1 - rate))
- return div + 1;
-
- return div;
-}
-
-static unsigned long aclk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int src;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
-
- return root_clk_get_rate(src) / aclk_best_div(clk, rate);
-}
-
-static int aclk_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
-
- reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK;
- reg |= aclk_best_div(clk, rate) - 1;
- __raw_writel(reg, clk->aclkreg);
- return 0;
-}
-
-static unsigned long get_rate_sys(struct clk *clk)
-{
- unsigned int src;
-
- src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK;
- return root_clk_get_rate(src);
-}
-
-static unsigned long get_rate_bus(struct clk *clk)
-{
- unsigned int reg, sdiv, bdiv, rate;
-
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- rate = get_rate_sys(clk);
- sdiv = (reg >> 20) & 3;
- if (sdiv)
- rate /= sdiv + 1;
- bdiv = (reg >> 4) & 0xff;
- if (bdiv)
- rate /= bdiv + 1;
- return rate;
-}
-
-static unsigned long get_rate_cpu(struct clk *clk)
-{
- unsigned int reg, div, fsys, fbus;
-
- fbus = get_rate_bus(clk);
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- if (reg & (1 << 29))
- return fbus;
- fsys = get_rate_sys(clk);
- div = (reg >> 16) & 0x0f;
- return fbus + ((fsys - fbus) * (div + 1)) / 16;
-}
-
-static unsigned long get_rate_root(struct clk *clk)
-{
- return root_clk_get_rate(clk->root_id);
-}
-
-static int aclk_set_parent(struct clk *clock, struct clk *parent)
-{
- u32 reg;
-
- if (clock->parent == parent)
- return 0;
-
- clock->parent = parent;
-
- if (!parent)
- return 0;
-
- if (parent->root_id == CLK_SRC_NOROOT)
- return 0;
- reg = __raw_readl(clock->aclkreg);
- reg &= ~ACLK_SEL_MASK;
- reg |= (parent->root_id << ACLK_SEL_SHIFT) & ACLK_SEL_MASK;
- __raw_writel(reg, clock->aclkreg);
-
- return 0;
-}
-
-#define DEFINE_ROOT_CLOCK(name, ri, p) \
- static struct clk name = { \
- .root_id = ri, \
- .get_rate = get_rate_root, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .parent = p, \
- };
-
-#define DEFINE_SPECIAL_CLOCK(name, gr, p) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .get_rate = gr, \
- .parent = p, \
- };
-
-#define DEFINE_ACLOCK(name, bc, bs, ar) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .bclkctr = bc, \
- .bclk_shift = bs, \
- .aclkreg = ar, \
- .get_rate = aclk_get_rate, \
- .set_rate = aclk_set_rate, \
- .round_rate = aclk_round_rate, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .set_parent = aclk_set_parent, \
- };
-
-#define DEFINE_BCLOCK(name, bc, bs, gr, p) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .bclkctr = bc, \
- .bclk_shift = bs, \
- .get_rate = gr, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .parent = p, \
- };
-
-DEFINE_ROOT_CLOCK(xi, CLK_SRC_XI, NULL)
-DEFINE_ROOT_CLOCK(xti, CLK_SRC_XTI, NULL)
-DEFINE_ROOT_CLOCK(xidiv, CLK_SRC_XIDIV, &xi)
-DEFINE_ROOT_CLOCK(xtidiv, CLK_SRC_XTIDIV, &xti)
-DEFINE_ROOT_CLOCK(pll0, CLK_SRC_PLL0, &xi)
-DEFINE_ROOT_CLOCK(pll1, CLK_SRC_PLL1, &xi)
-DEFINE_ROOT_CLOCK(pll2, CLK_SRC_PLL2, &xi)
-DEFINE_ROOT_CLOCK(pll0div, CLK_SRC_PLL0DIV, &pll0)
-DEFINE_ROOT_CLOCK(pll1div, CLK_SRC_PLL1DIV, &pll1)
-DEFINE_ROOT_CLOCK(pll2div, CLK_SRC_PLL2DIV, &pll2)
-
-/* The following 3 clocks are special and are initialized explicitly later */
-DEFINE_SPECIAL_CLOCK(sys, get_rate_sys, NULL)
-DEFINE_SPECIAL_CLOCK(bus, get_rate_bus, &sys)
-DEFINE_SPECIAL_CLOCK(cpu, get_rate_cpu, &sys)
-
-DEFINE_ACLOCK(tct, NULL, 0, ACLKTCT)
-DEFINE_ACLOCK(tcx, NULL, 0, ACLKTCX)
-DEFINE_ACLOCK(tcz, NULL, 0, ACLKTCZ)
-DEFINE_ACLOCK(ref, NULL, 0, ACLKREF)
-DEFINE_ACLOCK(uart0, BCLKCTR0, 5, ACLKUART0)
-DEFINE_ACLOCK(uart1, BCLKCTR0, 23, ACLKUART1)
-DEFINE_ACLOCK(uart2, BCLKCTR0, 6, ACLKUART2)
-DEFINE_ACLOCK(uart3, BCLKCTR0, 8, ACLKUART3)
-DEFINE_ACLOCK(uart4, BCLKCTR1, 6, ACLKUART4)
-DEFINE_ACLOCK(i2c, BCLKCTR0, 7, ACLKI2C)
-DEFINE_ACLOCK(adc, BCLKCTR0, 10, ACLKADC)
-DEFINE_ACLOCK(usbh0, BCLKCTR0, 11, ACLKUSBH)
-DEFINE_ACLOCK(lcd, BCLKCTR0, 13, ACLKLCD)
-DEFINE_ACLOCK(sd0, BCLKCTR0, 17, ACLKSDH0)
-DEFINE_ACLOCK(sd1, BCLKCTR1, 5, ACLKSDH1)
-DEFINE_ACLOCK(spi0, BCLKCTR0, 24, ACLKSPI0)
-DEFINE_ACLOCK(spi1, BCLKCTR0, 30, ACLKSPI1)
-DEFINE_ACLOCK(spdif, BCLKCTR1, 2, ACLKSPDIF)
-DEFINE_ACLOCK(c3dec, BCLKCTR1, 9, ACLKC3DEC)
-DEFINE_ACLOCK(can0, BCLKCTR1, 10, ACLKCAN0)
-DEFINE_ACLOCK(can1, BCLKCTR1, 11, ACLKCAN1)
-DEFINE_ACLOCK(gsb0, BCLKCTR1, 13, ACLKGSB0)
-DEFINE_ACLOCK(gsb1, BCLKCTR1, 14, ACLKGSB1)
-DEFINE_ACLOCK(gsb2, BCLKCTR1, 15, ACLKGSB2)
-DEFINE_ACLOCK(gsb3, BCLKCTR1, 16, ACLKGSB3)
-DEFINE_ACLOCK(usbh1, BCLKCTR1, 20, ACLKUSBH)
-
-DEFINE_BCLOCK(dai0, BCLKCTR0, 0, NULL, NULL)
-DEFINE_BCLOCK(pic, BCLKCTR0, 1, NULL, NULL)
-DEFINE_BCLOCK(tc, BCLKCTR0, 2, NULL, NULL)
-DEFINE_BCLOCK(gpio, BCLKCTR0, 3, NULL, NULL)
-DEFINE_BCLOCK(usbd, BCLKCTR0, 4, NULL, NULL)
-DEFINE_BCLOCK(ecc, BCLKCTR0, 9, NULL, NULL)
-DEFINE_BCLOCK(gdma0, BCLKCTR0, 12, NULL, NULL)
-DEFINE_BCLOCK(rtc, BCLKCTR0, 15, NULL, NULL)
-DEFINE_BCLOCK(nfc, BCLKCTR0, 16, NULL, NULL)
-DEFINE_BCLOCK(g2d, BCLKCTR0, 18, NULL, NULL)
-DEFINE_BCLOCK(gdma1, BCLKCTR0, 22, NULL, NULL)
-DEFINE_BCLOCK(mscl, BCLKCTR0, 25, NULL, NULL)
-DEFINE_BCLOCK(bdma, BCLKCTR1, 0, NULL, NULL)
-DEFINE_BCLOCK(adma0, BCLKCTR1, 1, NULL, NULL)
-DEFINE_BCLOCK(scfg, BCLKCTR1, 3, NULL, NULL)
-DEFINE_BCLOCK(cid, BCLKCTR1, 4, NULL, NULL)
-DEFINE_BCLOCK(dai1, BCLKCTR1, 7, NULL, NULL)
-DEFINE_BCLOCK(adma1, BCLKCTR1, 8, NULL, NULL)
-DEFINE_BCLOCK(gps, BCLKCTR1, 12, NULL, NULL)
-DEFINE_BCLOCK(gdma2, BCLKCTR1, 17, NULL, NULL)
-DEFINE_BCLOCK(gdma3, BCLKCTR1, 18, NULL, NULL)
-DEFINE_BCLOCK(ddrc, BCLKCTR1, 19, NULL, NULL)
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK(NULL, "bus", bus)
- _REGISTER_CLOCK(NULL, "cpu", cpu)
- _REGISTER_CLOCK(NULL, "tct", tct)
- _REGISTER_CLOCK(NULL, "tcx", tcx)
- _REGISTER_CLOCK(NULL, "tcz", tcz)
- _REGISTER_CLOCK(NULL, "ref", ref)
- _REGISTER_CLOCK(NULL, "dai0", dai0)
- _REGISTER_CLOCK(NULL, "pic", pic)
- _REGISTER_CLOCK(NULL, "tc", tc)
- _REGISTER_CLOCK(NULL, "gpio", gpio)
- _REGISTER_CLOCK(NULL, "usbd", usbd)
- _REGISTER_CLOCK("tcc-uart.0", NULL, uart0)
- _REGISTER_CLOCK("tcc-uart.2", NULL, uart2)
- _REGISTER_CLOCK("tcc-i2c", NULL, i2c)
- _REGISTER_CLOCK("tcc-uart.3", NULL, uart3)
- _REGISTER_CLOCK(NULL, "ecc", ecc)
- _REGISTER_CLOCK(NULL, "adc", adc)
- _REGISTER_CLOCK("tcc-usbh.0", "usb", usbh0)
- _REGISTER_CLOCK(NULL, "gdma0", gdma0)
- _REGISTER_CLOCK(NULL, "lcd", lcd)
- _REGISTER_CLOCK(NULL, "rtc", rtc)
- _REGISTER_CLOCK(NULL, "nfc", nfc)
- _REGISTER_CLOCK("tcc-mmc.0", NULL, sd0)
- _REGISTER_CLOCK(NULL, "g2d", g2d)
- _REGISTER_CLOCK(NULL, "gdma1", gdma1)
- _REGISTER_CLOCK("tcc-uart.1", NULL, uart1)
- _REGISTER_CLOCK("tcc-spi.0", NULL, spi0)
- _REGISTER_CLOCK(NULL, "mscl", mscl)
- _REGISTER_CLOCK("tcc-spi.1", NULL, spi1)
- _REGISTER_CLOCK(NULL, "bdma", bdma)
- _REGISTER_CLOCK(NULL, "adma0", adma0)
- _REGISTER_CLOCK(NULL, "spdif", spdif)
- _REGISTER_CLOCK(NULL, "scfg", scfg)
- _REGISTER_CLOCK(NULL, "cid", cid)
- _REGISTER_CLOCK("tcc-mmc.1", NULL, sd1)
- _REGISTER_CLOCK("tcc-uart.4", NULL, uart4)
- _REGISTER_CLOCK(NULL, "dai1", dai1)
- _REGISTER_CLOCK(NULL, "adma1", adma1)
- _REGISTER_CLOCK(NULL, "c3dec", c3dec)
- _REGISTER_CLOCK("tcc-can.0", NULL, can0)
- _REGISTER_CLOCK("tcc-can.1", NULL, can1)
- _REGISTER_CLOCK(NULL, "gps", gps)
- _REGISTER_CLOCK("tcc-gsb.0", NULL, gsb0)
- _REGISTER_CLOCK("tcc-gsb.1", NULL, gsb1)
- _REGISTER_CLOCK("tcc-gsb.2", NULL, gsb2)
- _REGISTER_CLOCK("tcc-gsb.3", NULL, gsb3)
- _REGISTER_CLOCK(NULL, "gdma2", gdma2)
- _REGISTER_CLOCK(NULL, "gdma3", gdma3)
- _REGISTER_CLOCK(NULL, "ddrc", ddrc)
- _REGISTER_CLOCK("tcc-usbh.1", "usb", usbh1)
-};
-
-static struct clk *root_clk_by_index(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return &pll0;
- case CLK_SRC_PLL1: return &pll1;
- case CLK_SRC_PLL2: return &pll2;
- case CLK_SRC_PLL0DIV: return &pll0div;
- case CLK_SRC_PLL1DIV: return &pll1div;
- case CLK_SRC_PLL2DIV: return &pll2div;
- case CLK_SRC_XI: return &xi;
- case CLK_SRC_XTI: return &xti;
- case CLK_SRC_XIDIV: return &xidiv;
- case CLK_SRC_XTIDIV: return &xtidiv;
- default: return NULL;
- }
-}
-
-static void find_aclk_parent(struct clk *clk)
-{
- unsigned int src;
- struct clk *clock;
-
- if (!clk->aclkreg)
- return;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
-
- clock = root_clk_by_index(src);
- if (!clock)
- return;
-
- clk->parent = clock;
- clk->set_parent = aclk_set_parent;
-}
-
-void __init tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq)
-{
- int i;
-
- xi_rate = xi_freq;
- xti_rate = xti_freq;
-
- /* fixup parents and add the clock */
- for (i = 0; i < ARRAY_SIZE(lookups); i++) {
- find_aclk_parent(lookups[i].clk);
- clkdev_add(&lookups[i]);
- }
- tcc8k_timer_init(&tcz, (void __iomem *)TIMER_BASE, INT_TC32);
-}
diff --git a/arch/arm/mach-tcc8k/common.h b/arch/arm/mach-tcc8k/common.h
deleted file mode 100644
index 705690add39..00000000000
--- a/arch/arm/mach-tcc8k/common.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef MACH_TCC8K_COMMON_H
-#define MACH_TCC8K_COMMON_H
-
-#include <linux/platform_device.h>
-
-extern struct platform_device tcc_nand_device;
-
-struct clk;
-
-extern void tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq);
-extern void tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq);
-extern void tcc8k_init_irq(void);
-extern void tcc8k_map_common_io(void);
-
-#endif
diff --git a/arch/arm/mach-tcc8k/devices.c b/arch/arm/mach-tcc8k/devices.c
deleted file mode 100644
index 6722ad7c283..00000000000
--- a/arch/arm/mach-tcc8k/devices.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * linux/arch/arm/mach-tcc8k/devices.c
- *
- * Copyright (C) Telechips, Inc.
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of GPL v2.
- *
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static u64 tcc8k_dmamask = DMA_BIT_MASK(32);
-
-#ifdef CONFIG_MTD_NAND_TCC
-/* NAND controller */
-static struct resource tcc_nand_resources[] = {
- {
- .start = (resource_size_t)NFC_BASE,
- .end = (resource_size_t)NFC_BASE + 0x7f,
- .flags = IORESOURCE_MEM,
- }, {
- .start = INT_NFC,
- .end = INT_NFC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device tcc_nand_device = {
- .name = "tcc_nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(tcc_nand_resources),
- .resource = tcc_nand_resources,
-};
-#endif
-
-#ifdef CONFIG_MMC_TCC8K
-/* MMC controller */
-static struct resource tcc8k_mmc0_resource[] = {
- {
- .start = INT_SD0,
- .end = INT_SD0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource tcc8k_mmc1_resource[] = {
- {
- .start = INT_SD1,
- .end = INT_SD1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device tcc8k_mmc0_device = {
- .name = "tcc-mmc",
- .id = 0,
- .num_resources = ARRAY_SIZE(tcc8k_mmc0_resource),
- .resource = tcc8k_mmc0_resource,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-struct platform_device tcc8k_mmc1_device = {
- .name = "tcc-mmc",
- .id = 1,
- .num_resources = ARRAY_SIZE(tcc8k_mmc1_resource),
- .resource = tcc8k_mmc1_resource,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-static inline void tcc8k_init_mmc(void)
-{
- u32 reg = __raw_readl(GPIOPS_BASE + GPIOPS_FS1_OFFS);
-
- reg |= GPIOPS_FS1_SDH0_BITS | GPIOPS_FS1_SDH1_BITS;
- __raw_writel(reg, GPIOPS_BASE + GPIOPS_FS1_OFFS);
-
- platform_device_register(&tcc8k_mmc0_device);
- platform_device_register(&tcc8k_mmc1_device);
-}
-#else
-static inline void tcc8k_init_mmc(void) { }
-#endif
-
-#ifdef CONFIG_USB_OHCI_HCD
-static int tcc8k_ohci_init(struct device *dev)
-{
- u32 reg;
-
- /* Use GPIO PK19 as VBUS control output */
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS0_OFFS);
- reg &= ~(1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS0_OFFS);
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS1_OFFS);
- reg &= ~(1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS1_OFFS);
-
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_DOE_OFFS);
- reg |= (1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_DOE_OFFS);
- /* Turn on VBUS */
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_DAT_OFFS);
- reg |= (1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_DAT_OFFS);
-
- return 0;
-}
-
-static struct resource tcc8k_ohci0_resources[] = {
- [0] = {
- .start = (resource_size_t)USBH0_BASE,
- .end = (resource_size_t)USBH0_BASE + 0x5c,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = INT_USBH0,
- .end = INT_USBH0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource tcc8k_ohci1_resources[] = {
- [0] = {
- .start = (resource_size_t)USBH1_BASE,
- .end = (resource_size_t)USBH1_BASE + 0x5c,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = INT_USBH1,
- .end = INT_USBH1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct tccohci_platform_data tcc8k_ohci0_platform_data = {
- .controller = 0,
- .port_mode = PMM_PERPORT_MODE,
- .init = tcc8k_ohci_init,
-};
-
-static struct tccohci_platform_data tcc8k_ohci1_platform_data = {
- .controller = 1,
- .port_mode = PMM_PERPORT_MODE,
- .init = tcc8k_ohci_init,
-};
-
-static struct platform_device ohci0_device = {
- .name = "tcc-ohci",
- .id = 0,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tcc8k_ohci0_platform_data,
- },
- .num_resources = ARRAY_SIZE(tcc8k_ohci0_resources),
- .resource = tcc8k_ohci0_resources,
-};
-
-static struct platform_device ohci1_device = {
- .name = "tcc-ohci",
- .id = 1,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tcc8k_ohci1_platform_data,
- },
- .num_resources = ARRAY_SIZE(tcc8k_ohci1_resources),
- .resource = tcc8k_ohci1_resources,
-};
-
-static void __init tcc8k_init_usbhost(void)
-{
- platform_device_register(&ohci0_device);
- platform_device_register(&ohci1_device);
-}
-#else
-static void __init tcc8k_init_usbhost(void) { }
-#endif
-
-/* USB device controller*/
-#ifdef CONFIG_USB_GADGET_TCC8K
-static struct resource udc_resources[] = {
- [0] = {
- .start = INT_USBD,
- .end = INT_USBD,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .start = INT_UDMA,
- .end = INT_UDMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device tcc8k_udc_device = {
- .name = "tcc-udc",
- .id = 0,
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static void __init tcc8k_init_usb_gadget(void)
-{
- platform_device_register(&tcc8k_udc_device);
-}
-#else
-static void __init tcc8k_init_usb_gadget(void) { }
-#endif /* CONFIG_USB_GADGET_TCC83X */
-
-static int __init tcc8k_init_devices(void)
-{
- tcc8k_init_mmc();
- tcc8k_init_usbhost();
- tcc8k_init_usb_gadget();
- return 0;
-}
-
-arch_initcall(tcc8k_init_devices);
diff --git a/arch/arm/mach-tcc8k/io.c b/arch/arm/mach-tcc8k/io.c
deleted file mode 100644
index 9b39d7fa658..00000000000
--- a/arch/arm/mach-tcc8k/io.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * linux/arch/arm/mach-tcc8k/io.c
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * derived from TCC83xx io.c
- * Copyright (C) Telechips, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/tcc8k-regs.h>
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc tcc8k_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)CS1_BASE_VIRT,
- .pfn = __phys_to_pfn(CS1_BASE),
- .length = CS1_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)AHB_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(AHB_PERI_BASE),
- .length = AHB_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)APB0_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(APB0_PERI_BASE),
- .length = APB0_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)APB1_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(APB1_PERI_BASE),
- .length = APB1_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)EXT_MEM_CTRL_BASE_VIRT,
- .pfn = __phys_to_pfn(EXT_MEM_CTRL_BASE),
- .length = EXT_MEM_CTRL_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-/*
- * Maps common IO regions for tcc8k.
- *
- */
-void __init tcc8k_map_common_io(void)
-{
- iotable_init(tcc8k_io_desc, ARRAY_SIZE(tcc8k_io_desc));
-}
diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c
deleted file mode 100644
index 209fa5c65d4..00000000000
--- a/arch/arm/mach-tcc8k/irq.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) Telechips, Inc.
- * Copyright (C) 2009-2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU GPL version 2.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-/* Disable IRQ */
-static void tcc8000_mask_ack_irq0(struct irq_data *d)
-{
- PIC0_IEN &= ~(1 << d->irq);
- PIC0_CREQ |= (1 << d->irq);
-}
-
-static void tcc8000_mask_ack_irq1(struct irq_data *d)
-{
- PIC1_IEN &= ~(1 << (d->irq - 32));
- PIC1_CREQ |= (1 << (d->irq - 32));
-}
-
-static void tcc8000_mask_irq0(struct irq_data *d)
-{
- PIC0_IEN &= ~(1 << d->irq);
-}
-
-static void tcc8000_mask_irq1(struct irq_data *d)
-{
- PIC1_IEN &= ~(1 << (d->irq - 32));
-}
-
-static void tcc8000_ack_irq0(struct irq_data *d)
-{
- PIC0_CREQ |= (1 << d->irq);
-}
-
-static void tcc8000_ack_irq1(struct irq_data *d)
-{
- PIC1_CREQ |= (1 << (d->irq - 32));
-}
-
-/* Enable IRQ */
-static void tcc8000_unmask_irq0(struct irq_data *d)
-{
- PIC0_IEN |= (1 << d->irq);
- PIC0_INTOEN |= (1 << d->irq);
-}
-
-static void tcc8000_unmask_irq1(struct irq_data *d)
-{
- PIC1_IEN |= (1 << (d->irq - 32));
- PIC1_INTOEN |= (1 << (d->irq - 32));
-}
-
-static struct irq_chip tcc8000_irq_chip0 = {
- .name = "tcc_irq0",
- .irq_mask = tcc8000_mask_irq0,
- .irq_ack = tcc8000_ack_irq0,
- .irq_mask_ack = tcc8000_mask_ack_irq0,
- .irq_unmask = tcc8000_unmask_irq0,
-};
-
-static struct irq_chip tcc8000_irq_chip1 = {
- .name = "tcc_irq1",
- .irq_mask = tcc8000_mask_irq1,
- .irq_ack = tcc8000_ack_irq1,
- .irq_mask_ack = tcc8000_mask_ack_irq1,
- .irq_unmask = tcc8000_unmask_irq1,
-};
-
-void __init tcc8k_init_irq(void)
-{
- int irqno;
-
- /* Mask and clear all interrupts */
- PIC0_IEN = 0x00000000;
- PIC0_CREQ = 0xffffffff;
- PIC1_IEN = 0x00000000;
- PIC1_CREQ = 0xffffffff;
-
- PIC0_MEN0 = 0x00000003;
- PIC1_MEN1 = 0x00000003;
- PIC1_MEN = 0x00000003;
-
- /* let all IRQs be level triggered */
- PIC0_TMODE = 0xffffffff;
- PIC1_TMODE = 0xffffffff;
- /* all IRQs are IRQs (not FIQs) */
- PIC0_IRQSEL = 0xffffffff;
- PIC1_IRQSEL = 0xffffffff;
-
- for (irqno = 0; irqno < NR_IRQS; irqno++) {
- if (irqno < 32)
- irq_set_chip(irqno, &tcc8000_irq_chip0);
- else
- irq_set_chip(irqno, &tcc8000_irq_chip1);
- irq_set_handler(irqno, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-}
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
deleted file mode 100644
index a96babe8377..00000000000
--- a/arch/arm/mach-tcc8k/time.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * TCC8000 system timer setup
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL version 2.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static void __iomem *timer_base;
-
-static int tcc_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long reg = __raw_readl(timer_base + TC32MCNT_OFFS);
-
- __raw_writel(reg + evt, timer_base + TC32CMP0_OFFS);
- return 0;
-}
-
-static void tcc_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned long tc32irq;
-
- switch (mode) {
- case CLOCK_EVT_MODE_ONESHOT:
- tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
- tc32irq |= TC32IRQ_IRQEN0;
- __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
- tc32irq &= ~TC32IRQ_IRQEN0;
- __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
- break;
- case CLOCK_EVT_MODE_PERIODIC:
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static irqreturn_t tcc8k_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- /* Acknowledge TC32 interrupt by reading TC32IRQ */
- __raw_readl(timer_base + TC32IRQ_OFFS);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct clock_event_device clockevent_tcc = {
- .name = "tcc_timer1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_mode = tcc_set_mode,
- .set_next_event = tcc_set_next_event,
- .rating = 200,
-};
-
-static struct irqaction tcc8k_timer_irq = {
- .name = "TC32_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = tcc8k_timer_interrupt,
- .dev_id = &clockevent_tcc,
-};
-
-static int __init tcc_clockevent_init(struct clk *clock)
-{
- unsigned int c = clk_get_rate(clock);
-
- clocksource_mmio_init(timer_base + TC32MCNT_OFFS, "tcc_tc32", c,
- 200, 32, clocksource_mmio_readl_up);
-
- clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
- clockevent_tcc.shift);
- clockevent_tcc.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_tcc);
- clockevent_tcc.min_delta_ns =
- clockevent_delta2ns(0xff, &clockevent_tcc);
-
- clockevent_tcc.cpumask = cpumask_of(0);
-
- clockevents_register_device(&clockevent_tcc);
-
- return 0;
-}
-
-void __init tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq)
-{
- u32 reg;
-
- timer_base = base;
- tcc8k_timer_irq.irq = irq;
-
- /* Enable clocks */
- clk_enable(clock);
-
- /* Initialize 32-bit timer */
- reg = __raw_readl(timer_base + TC32EN_OFFS);
- reg &= ~TC32EN_ENABLE; /* Disable timer */
- __raw_writel(reg, timer_base + TC32EN_OFFS);
- /* Free running timer, counting from 0 to 0xffffffff */
- __raw_writel(0, timer_base + TC32EN_OFFS);
- __raw_writel(0, timer_base + TC32LDV_OFFS);
- reg = __raw_readl(timer_base + TC32IRQ_OFFS);
- reg |= TC32IRQ_IRQEN0; /* irq at match with CMP0 */
- __raw_writel(reg, timer_base + TC32IRQ_OFFS);
-
- __raw_writel(TC32EN_ENABLE, timer_base + TC32EN_OFFS);
-
- tcc_clockevent_init(clock);
- setup_irq(irq, &tcc8k_timer_irq);
-}
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index 70f060251f0..c2ff8e02010 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -146,5 +146,6 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_dt_init,
+ .restart = tegra_assert_system_reset,
.dt_compat = tegra20_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index d60a0d45f2f..a0f9634f672 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -191,4 +191,5 @@ MACHINE_START(HARMONY, "harmony")
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_harmony_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 8a524591945..fcf4f377b1d 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -221,4 +221,5 @@ MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_paz00_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index b79f9ce9941..cfc74d46a09 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -288,6 +288,7 @@ MACHINE_START(SEABOARD, "seaboard")
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_seaboard_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
MACHINE_START(KAEN, "kaen")
@@ -298,6 +299,7 @@ MACHINE_START(KAEN, "kaen")
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_kaen_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
MACHINE_START(WARIO, "wario")
@@ -308,4 +310,5 @@ MACHINE_START(WARIO, "wario")
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_wario_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 4a197a20be9..cd52820a3e3 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -180,4 +180,5 @@ MACHINE_START(TRIMSLICE, "trimslice")
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_trimslice_init,
+ .restart = tegra_assert_system_reset,
MACHINE_END
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 72b666bd304..a2eb90169ae 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -33,8 +33,6 @@
#include "clock.h"
#include "fuse.h"
-void (*arch_reset)(char mode, const char *cmd) = tegra_assert_system_reset;
-
#ifdef CONFIG_OF
static const struct of_device_id tegra_dt_irq_match[] __initconst = {
{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S
index ac11262149c..e577cfe27e7 100644
--- a/arch/arm/mach-tegra/include/mach/entry-macro.S
+++ b/arch/arm/mach-tegra/include/mach/entry-macro.S
@@ -18,21 +18,3 @@
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
-#if !defined(CONFIG_ARM_GIC)
- /* legacy interrupt controller for AP16 */
-
- .macro get_irqnr_preamble, base, tmp
- @ enable imprecise aborts
- cpsie a
- @ EVP base at 0xf010f000
- mov \base, #0xf0000000
- orr \base, #0x00100000
- orr \base, #0x0000f000
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base, #0x20] @ EVT_IRQ_STS
- cmp \irqnr, #0x80
- .endm
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
index 027c4215d31..a312988bf6f 100644
--- a/arch/arm/mach-tegra/include/mach/system.h
+++ b/arch/arm/mach-tegra/include/mach/system.h
@@ -21,10 +21,6 @@
#ifndef __MACH_TEGRA_SYSTEM_H
#define __MACH_TEGRA_SYSTEM_H
-#include <mach/iomap.h>
-
-extern void (*arch_reset)(char mode, const char *cmd);
-
static inline void arch_idle(void)
{
}
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 004b0fdf0d7..4e1afcd54fa 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -29,10 +29,6 @@
#include "board.h"
-#define INT_SYS_NR (INT_GPIO_BASE - INT_PRI_BASE)
-#define INT_SYS_SZ (INT_SEC_BASE - INT_PRI_BASE)
-#define PPI_NR ((INT_SYS_NR+INT_SYS_SZ-1)/INT_SYS_SZ)
-
#define ICTLR_CPU_IEP_VFIQ 0x08
#define ICTLR_CPU_IEP_FIR 0x14
#define ICTLR_CPU_IEP_FIR_SET 0x18
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 6366654b54c..1d1acda4f3e 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -19,7 +19,6 @@
#include <linux/init.h>
#include <linux/err.h>
-#include <linux/sched.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -106,25 +105,9 @@ static struct clock_event_device tegra_clockevent = {
.set_mode = tegra_timer_set_mode,
};
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 1MHz, NSEC_PER_SEC, 60).
- * This gives a resolution of about 1us and a wrap period of about 1h11min.
- */
-#define SC_MULT 4194304000u
-#define SC_SHIFT 22
-
-unsigned long long notrace sched_clock(void)
-{
- u32 cyc = timer_readl(TIMERUS_CNTR_1US);
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-static void notrace tegra_update_sched_clock(void)
+static u32 notrace tegra_read_sched_clock(void)
{
- u32 cyc = timer_readl(TIMERUS_CNTR_1US);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return timer_readl(TIMERUS_CNTR_1US);
}
/*
@@ -226,8 +209,7 @@ static void __init tegra_init_timer(void)
WARN(1, "Unknown clock rate");
}
- init_fixed_sched_clock(&cd, tegra_update_sched_clock, 32,
- 1000000, SC_MULT, SC_SHIFT);
+ setup_sched_clock(tegra_read_sched_clock, 32, 1000000);
if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
"timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index ac0791e924b..697930761b3 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1888,3 +1888,23 @@ static int core_module_init(void)
return mmc_init(&mmcsd_device);
}
module_init(core_module_init);
+
+/* Forward declare this function from the watchdog */
+void coh901327_watchdog_reset(void);
+
+void u300_restart(char mode, const char *cmd)
+{
+ switch (mode) {
+ case 's':
+ case 'h':
+#ifdef CONFIG_COH901327_WATCHDOG
+ coh901327_watchdog_reset();
+#endif
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ /* Wait for system do die/reset. */
+ while (1);
+}
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
deleted file mode 100644
index c808f347a08..00000000000
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/memory.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Memory virtual/physical mapping constants.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x48000000)
-#define BOOT_PARAMS_OFFSET 0x100
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/platform.h b/arch/arm/mach-u300/include/mach/platform.h
index 77d9210a82e..096333f32fc 100644
--- a/arch/arm/mach-u300/include/mach/platform.h
+++ b/arch/arm/mach-u300/include/mach/platform.h
@@ -14,6 +14,7 @@
void u300_map_io(void);
void u300_init_irq(void);
void u300_init_devices(void);
+void u300_restart(char, const char *);
extern struct sys_timer u300_timer;
#endif
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
index 6b6fef7a438..574d46e3829 100644
--- a/arch/arm/mach-u300/include/mach/system.h
+++ b/arch/arm/mach-u300/include/mach/system.h
@@ -8,33 +8,7 @@
* System shutdown and reset functions.
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <asm/hardware/vic.h>
-#include <asm/irq.h>
-
-/* Forward declare this function from the watchdog */
-void coh901327_watchdog_reset(void);
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-static void arch_reset(char mode, const char *cmd)
-{
- switch (mode) {
- case 's':
- case 'h':
- printk(KERN_CRIT "RESET: shutting down/rebooting system\n");
-#ifdef CONFIG_COH901327_WATCHDOG
- coh901327_watchdog_reset();
-#endif
- break;
- default:
- /* Do nothing */
- break;
- }
- /* Wait for system do die/reset. */
- while (1);
-}
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 5f51bdeef0e..bc1c7897e82 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -9,7 +9,6 @@
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
#include <linux/interrupt.h>
-#include <linux/sched.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/clockchips.h>
@@ -337,18 +336,10 @@ static struct irqaction u300_timer_irq = {
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by OMAP implementation.)
*/
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 notrace u300_read_sched_clock(void)
{
- u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace u300_update_sched_clock(void)
-{
- u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
}
@@ -366,7 +357,7 @@ static void __init u300_timer_init(void)
clk_enable(clk);
rate = clk_get_rate(clk);
- init_sched_clock(&cd, u300_update_sched_clock, 32, rate);
+ setup_sched_clock(u300_read_sched_clock, 32, rate);
/*
* Disable the "OS" and "DD" timers - these are designed for Symbian!
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 4a4fd334eb6..f30c69d91d9 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -47,10 +47,11 @@ static void __init u300_init_machine(void)
MACHINE_START(U300, MACH_U300_STRING)
/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
- .atag_offset = BOOT_PARAMS_OFFSET,
+ .atag_offset = 0x100,
.map_io = u300_map_io,
.init_irq = u300_init_irq,
.handle_irq = vic_handle_irq,
.timer = &u300_timer,
.init_machine = u300_init_machine,
+ .restart = u300_restart,
MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 9de1af00809..5323286b265 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -30,12 +30,11 @@ static struct map_desc u5500_uart_io_desc[] __initdata = {
};
static struct map_desc u5500_io_desc[] __initdata = {
- __IO_DEV_DESC(U5500_GIC_CPU_BASE, SZ_4K),
+ /* SCU base also covers GIC CPU BASE and TWD with its 4K page */
+ __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 13e8890a8b8..7f2729c05db 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -35,12 +35,11 @@ static struct map_desc u8500_uart_io_desc[] __initdata = {
};
static struct map_desc u8500_io_desc[] __initdata = {
- __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+ /* SCU base also covers GIC CPU BASE and TWD with its 4K page */
+ __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
__IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
index 7389df911b1..c01ef66537f 100644
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -1,10 +1,5 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
-/*
- * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough
- * room for a couple of GPIO expanders.
- */
-#define ARCH_NR_GPIOS 350
#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
index c0cd8006f1a..258e5c919c2 100644
--- a/arch/arm/mach-ux500/include/mach/system.h
+++ b/arch/arm/mach-ux500/include/mach/system.h
@@ -17,9 +17,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /* yet to be implemented - TODO */
-}
-
#endif
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 4d8dfc15f3e..cbcda61162d 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -740,6 +740,19 @@ static void versatile_leds_event(led_event_t ledevt)
}
#endif /* CONFIG_LEDS */
+void versatile_restart(char mode, const char *cmd)
+{
+ void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
+ u32 val;
+
+ val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET);
+ val |= 0x105;
+
+ __raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET);
+ __raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET);
+ __raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET);
+}
+
/* Early initializations */
void __init versatile_init_early(void)
{
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index e01422700eb..2ef2f555f31 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -30,6 +30,7 @@ extern void __init versatile_init_early(void);
extern void __init versatile_init_irq(void);
extern void __init versatile_map_io(void);
extern struct sys_timer versatile_timer;
+extern void versatile_restart(char, const char *);
extern unsigned int mmc_status(struct device *dev);
#ifdef CONFIG_OF
extern struct of_dev_auxdata versatile_auxdata_lookup[];
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
index 8ffc12a7cb2..f3fa347895f 100644
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -21,10 +21,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
static inline void arch_idle(void)
{
/*
@@ -34,16 +30,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- u32 val;
-
- val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
- val |= 0x105;
-
- __raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
- __raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
- __raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
-}
-
#endif
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index c83a1f379f7..63b8dd2b9f4 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -43,4 +43,5 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
.handle_irq = vic_handle_irq,
.timer = &versatile_timer,
.init_machine = versatile_init,
+ .restart = versatile_restart,
MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index f4d1e0f072c..ae5ad3c8f3d 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -50,4 +50,5 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
.timer = &versatile_timer,
.init_machine = versatile_dt_init,
.dt_compat = versatile_dt_match,
+ .restart = versatile_restart,
MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 4d31eeb6c10..7aab79b665e 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -111,4 +111,5 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
.handle_irq = vic_handle_irq,
.timer = &versatile_timer,
.init_machine = versatile_pb_init,
+ .restart = versatile_restart,
MACHINE_END
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 931148487f0..9b3d0fbaee7 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -8,5 +8,7 @@ config ARCH_VEXPRESS_CA9X4
select ARM_ERRATA_720789
select ARM_ERRATA_751472
select ARM_ERRATA_753970
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
endmenu
diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h
index 899a4e628a4..f653a8e265b 100644
--- a/arch/arm/mach-vexpress/include/mach/system.h
+++ b/arch/arm/mach-vexpress/include/mach/system.h
@@ -30,8 +30,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
-}
-
#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 7aa07a8ce23..6dd10e320ef 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -438,7 +438,6 @@ static void __init v2m_init(void)
amba_device_register(v2m_amba_devs[i], &iomem_resource);
pm_power_off = v2m_power_off;
- arm_pm_restart = v2m_restart;
ct_desc->init_tile();
}
@@ -451,4 +450,5 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
.timer = &v2m_timer,
.handle_irq = gic_handle_irq,
.init_machine = v2m_init,
+ .restart = v2m_restart,
MACHINE_END
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 0a235e50233..604e1db266e 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -33,9 +33,11 @@
#include <mach/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-ebi.h>
+#include <mach/regs-timer.h>
#include "cpu.h"
#include "clock.h"
+#include "nuc9xx.h"
/* Initial IO mappings */
@@ -222,3 +224,17 @@ void __init nuc900_init_clocks(void)
clkdev_add_table(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
}
+#define WTCR (TMR_BA + 0x1C)
+#define WTCLK (1 << 10)
+#define WTE (1 << 7)
+#define WTRE (1 << 1)
+
+void nuc9xx_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* Jump into ROM at address 0 */
+ soft_restart(0);
+ } else {
+ __raw_writel(WTE | WTRE | WTCLK, WTCR);
+ }
+}
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
index 68875a1c16b..2aaeb931161 100644
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ b/arch/arm/mach-w90x900/include/mach/system.h
@@ -14,28 +14,6 @@
* (at your option) any later version.
*
*/
-
-#include <linux/io.h>
-#include <asm/proc-fns.h>
-#include <mach/map.h>
-#include <mach/regs-timer.h>
-
-#define WTCR (TMR_BA + 0x1C)
-#define WTCLK (1 << 10)
-#define WTE (1 << 7)
-#define WTRE (1 << 1)
-
static void arch_idle(void)
{
}
-
-static void arch_reset(char mode, const char *cmd)
-{
- if (mode == 's') {
- /* Jump into ROM at address 0 */
- soft_restart(0);
- } else {
- __raw_writel(WTE | WTRE | WTCLK, WTCR);
- }
-}
-
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index 31c10901822..b4243e4f156 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -38,4 +38,5 @@ MACHINE_START(W90P910EVB, "W90P910EVB")
.init_irq = nuc900_init_irq,
.init_machine = nuc910evb_init,
.timer = &nuc900_timer,
+ .restart = nuc9xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 4062e55a57d..067d8f9166d 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -41,4 +41,5 @@ MACHINE_START(W90P950EVB, "W90P950EVB")
.init_irq = nuc900_init_irq,
.init_machine = nuc950evb_init,
.timer = &nuc900_timer,
+ .restart = nuc9xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index 0ab9995d5b5..cbb3adc3db1 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -38,4 +38,5 @@ MACHINE_START(W90N960EVB, "W90N960EVB")
.init_irq = nuc900_init_irq,
.init_machine = nuc960evb_init,
.timer = &nuc900_timer,
+ .restart = nuc9xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc9xx.h b/arch/arm/mach-w90x900/nuc9xx.h
index 847c4f3e044..91acb404779 100644
--- a/arch/arm/mach-w90x900/nuc9xx.h
+++ b/arch/arm/mach-w90x900/nuc9xx.h
@@ -21,3 +21,4 @@ struct sys_timer;
extern void nuc900_init_irq(void);
extern struct sys_timer nuc900_timer;
+extern void nuc9xx_restart(char, const char *);
diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h
index 1b84d705c67..8e88e0b8d2b 100644
--- a/arch/arm/mach-zynq/include/mach/system.h
+++ b/arch/arm/mach-zynq/include/mach/system.h
@@ -20,9 +20,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- /* Add architecture specific reset processing here */
-}
-
#endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 5cf7922ff5e..4cefb57d9ed 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -833,14 +833,23 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
Say Y here to use the Feroceon L2 cache in writethrough mode.
Unless you specifically require this, say N for writeback mode.
+config MIGHT_HAVE_CACHE_L2X0
+ bool
+ help
+ This option should be selected by machines which have a L2x0
+ or PL310 cache controller, but where its use is optional.
+
+ The only effect of this option is to make CACHE_L2X0 and
+ related options available to the user for configuration.
+
+ Boards or SoCs which always require the cache controller
+ support to be present should select CACHE_L2X0 directly
+ instead of this option, thus preventing the user from
+ inadvertently configuring a broken kernel.
+
config CACHE_L2X0
- bool "Enable the L2x0 outer cache controller"
- depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
- ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
- ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
- ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
- default y
+ bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0
+ default MIGHT_HAVE_CACHE_L2X0
select OUTER_CACHE
select OUTER_CACHE_SYNC
help
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index eb5520fc755..bb7eac381a8 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -220,7 +220,7 @@ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
static int __kprobes
__do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
- struct task_struct *tsk)
+ unsigned int flags, struct task_struct *tsk)
{
struct vm_area_struct *vma;
int fault;
@@ -242,18 +242,7 @@ good_area:
goto out;
}
- /*
- * If for any reason at all we couldn't handle the fault, make
- * sure we exit gracefully rather than endlessly redo the fault.
- */
- fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0);
- if (unlikely(fault & VM_FAULT_ERROR))
- return fault;
- if (fault & VM_FAULT_MAJOR)
- tsk->maj_flt++;
- else
- tsk->min_flt++;
- return fault;
+ return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
check_stack:
if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
@@ -268,6 +257,9 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
struct task_struct *tsk;
struct mm_struct *mm;
int fault, sig, code;
+ int write = fsr & FSR_WRITE;
+ unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+ (write ? FAULT_FLAG_WRITE : 0);
if (notify_page_fault(regs, fsr))
return 0;
@@ -294,6 +286,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
if (!down_read_trylock(&mm->mmap_sem)) {
if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
goto no_context;
+retry:
down_read(&mm->mmap_sem);
} else {
/*
@@ -309,14 +302,41 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
#endif
}
- fault = __do_page_fault(mm, addr, fsr, tsk);
- up_read(&mm->mmap_sem);
+ fault = __do_page_fault(mm, addr, fsr, flags, tsk);
+
+ /* If we need to retry but a fatal signal is pending, handle the
+ * signal first. We do not need to release the mmap_sem because
+ * it would already be released in __lock_page_or_retry in
+ * mm/filemap.c. */
+ if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+ return 0;
+
+ /*
+ * Major/minor page fault accounting is only done on the
+ * initial attempt. If we go through a retry, it is extremely
+ * likely that the page will be found in page cache at that point.
+ */
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
- if (fault & VM_FAULT_MAJOR)
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, addr);
- else if (fault & VM_FAULT_MINOR)
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, addr);
+ if (flags & FAULT_FLAG_ALLOW_RETRY) {
+ if (fault & VM_FAULT_MAJOR) {
+ tsk->maj_flt++;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
+ regs, addr);
+ } else {
+ tsk->min_flt++;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+ regs, addr);
+ }
+ if (fault & VM_FAULT_RETRY) {
+ /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
+ * of starvation. */
+ flags &= ~FAULT_FLAG_ALLOW_RETRY;
+ goto retry;
+ }
+ }
+
+ up_read(&mm->mmap_sem);
/*
* Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 44b628e4d6e..ce8cb1970d7 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -11,10 +11,49 @@
#include <linux/random.h>
#include <asm/cachetype.h>
+static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr,
+ unsigned long pgoff)
+{
+ unsigned long base = addr & ~(SHMLBA-1);
+ unsigned long off = (pgoff << PAGE_SHIFT) & (SHMLBA-1);
+
+ if (base + off <= addr)
+ return base + off;
+
+ return base - off;
+}
+
#define COLOUR_ALIGN(addr,pgoff) \
((((addr)+SHMLBA-1)&~(SHMLBA-1)) + \
(((pgoff)<<PAGE_SHIFT) & (SHMLBA-1)))
+/* gap between mmap and stack */
+#define MIN_GAP (128*1024*1024UL)
+#define MAX_GAP ((TASK_SIZE)/6*5)
+
+static int mmap_is_legacy(void)
+{
+ if (current->personality & ADDR_COMPAT_LAYOUT)
+ return 1;
+
+ if (rlimit(RLIMIT_STACK) == RLIM_INFINITY)
+ return 1;
+
+ return sysctl_legacy_va_layout;
+}
+
+static unsigned long mmap_base(unsigned long rnd)
+{
+ unsigned long gap = rlimit(RLIMIT_STACK);
+
+ if (gap < MIN_GAP)
+ gap = MIN_GAP;
+ else if (gap > MAX_GAP)
+ gap = MAX_GAP;
+
+ return PAGE_ALIGN(TASK_SIZE - gap - rnd);
+}
+
/*
* We need to ensure that shared mappings are correctly aligned to
* avoid aliasing issues with VIPT caches. We need to ensure that
@@ -68,13 +107,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
if (len > mm->cached_hole_size) {
start_addr = addr = mm->free_area_cache;
} else {
- start_addr = addr = TASK_UNMAPPED_BASE;
+ start_addr = addr = mm->mmap_base;
mm->cached_hole_size = 0;
}
- /* 8 bits of randomness in 20 address space bits */
- if ((current->flags & PF_RANDOMIZE) &&
- !(current->personality & ADDR_NO_RANDOMIZE))
- addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT;
full_search:
if (do_align)
@@ -111,6 +146,134 @@ full_search:
}
}
+unsigned long
+arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
+ const unsigned long len, const unsigned long pgoff,
+ const unsigned long flags)
+{
+ struct vm_area_struct *vma;
+ struct mm_struct *mm = current->mm;
+ unsigned long addr = addr0;
+ int do_align = 0;
+ int aliasing = cache_is_vipt_aliasing();
+
+ /*
+ * We only need to do colour alignment if either the I or D
+ * caches alias.
+ */
+ if (aliasing)
+ do_align = filp || (flags & MAP_SHARED);
+
+ /* requested length too big for entire address space */
+ if (len > TASK_SIZE)
+ return -ENOMEM;
+
+ if (flags & MAP_FIXED) {
+ if (aliasing && flags & MAP_SHARED &&
+ (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
+ return -EINVAL;
+ return addr;
+ }
+
+ /* requesting a specific address */
+ if (addr) {
+ if (do_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ else
+ addr = PAGE_ALIGN(addr);
+ vma = find_vma(mm, addr);
+ if (TASK_SIZE - len >= addr &&
+ (!vma || addr + len <= vma->vm_start))
+ return addr;
+ }
+
+ /* check if free_area_cache is useful for us */
+ if (len <= mm->cached_hole_size) {
+ mm->cached_hole_size = 0;
+ mm->free_area_cache = mm->mmap_base;
+ }
+
+ /* either no address requested or can't fit in requested address hole */
+ addr = mm->free_area_cache;
+ if (do_align) {
+ unsigned long base = COLOUR_ALIGN_DOWN(addr - len, pgoff);
+ addr = base + len;
+ }
+
+ /* make sure it can fit in the remaining address space */
+ if (addr > len) {
+ vma = find_vma(mm, addr-len);
+ if (!vma || addr <= vma->vm_start)
+ /* remember the address as a hint for next time */
+ return (mm->free_area_cache = addr-len);
+ }
+
+ if (mm->mmap_base < len)
+ goto bottomup;
+
+ addr = mm->mmap_base - len;
+ if (do_align)
+ addr = COLOUR_ALIGN_DOWN(addr, pgoff);
+
+ do {
+ /*
+ * Lookup failure means no vma is above this address,
+ * else if new region fits below vma->vm_start,
+ * return with success:
+ */
+ vma = find_vma(mm, addr);
+ if (!vma || addr+len <= vma->vm_start)
+ /* remember the address as a hint for next time */
+ return (mm->free_area_cache = addr);
+
+ /* remember the largest hole we saw so far */
+ if (addr + mm->cached_hole_size < vma->vm_start)
+ mm->cached_hole_size = vma->vm_start - addr;
+
+ /* try just below the current vma->vm_start */
+ addr = vma->vm_start - len;
+ if (do_align)
+ addr = COLOUR_ALIGN_DOWN(addr, pgoff);
+ } while (len < vma->vm_start);
+
+bottomup:
+ /*
+ * A failed mmap() very likely causes application failure,
+ * so fall back to the bottom-up function here. This scenario
+ * can happen with large stack limits and large mmap()
+ * allocations.
+ */
+ mm->cached_hole_size = ~0UL;
+ mm->free_area_cache = TASK_UNMAPPED_BASE;
+ addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags);
+ /*
+ * Restore the topdown base:
+ */
+ mm->free_area_cache = mm->mmap_base;
+ mm->cached_hole_size = ~0UL;
+
+ return addr;
+}
+
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+ unsigned long random_factor = 0UL;
+
+ /* 8 bits of randomness in 20 address space bits */
+ if ((current->flags & PF_RANDOMIZE) &&
+ !(current->personality & ADDR_NO_RANDOMIZE))
+ random_factor = (get_random_int() % (1 << 8)) << PAGE_SHIFT;
+
+ if (mmap_is_legacy()) {
+ mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
+ mm->get_unmapped_area = arch_get_unmapped_area;
+ mm->unmap_area = arch_unmap_area;
+ } else {
+ mm->mmap_base = mmap_base(random_factor);
+ mm->get_unmapped_area = arch_get_unmapped_area_topdown;
+ mm->unmap_area = arch_unmap_area_topdown;
+ }
+}
/*
* You really shouldn't be using read() or write() on /dev/mem. This
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 7efa2a721d5..7e9b5bf910c 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -161,6 +161,7 @@ __v7_ca5mp_setup:
__v7_ca9mp_setup:
mov r10, #(1 << 0) @ TLB ops broadcasting
b 1f
+__v7_ca7mp_setup:
__v7_ca15mp_setup:
mov r10, #0
1:
@@ -240,11 +241,13 @@ __v7_setup:
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
-#ifdef CONFIG_ARM_ERRATA_751472
- cmp r6, #0x30 @ present prior to r3p0
+#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
+ ALT_SMP(cmp r6, #0x30) @ present prior to r3p0
+ ALT_UP_B(1f)
mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrlt r10, r10, #1 << 11 @ set bit #11
mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
+1:
#endif
3: mov r10, #0
@@ -327,6 +330,16 @@ __v7_ca5mp_proc_info:
.size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info
/*
+ * ARM Ltd. Cortex A7 processor.
+ */
+ .type __v7_ca7mp_proc_info, #object
+__v7_ca7mp_proc_info:
+ .long 0x410fc070
+ .long 0xff0ffff0
+ __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+ .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
+
+ /*
* ARM Ltd. Cortex A9 processor.
*/
.type __v7_ca9mp_proc_info, #object
diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S
index cafa1835433..d18dde95b8a 100644
--- a/arch/arm/nwfpe/entry.S
+++ b/arch/arm/nwfpe/entry.S
@@ -20,6 +20,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/opcodes.h>
+
/* This is the kernel's entry point into the floating point emulator.
It is called from the kernel with code similar to this:
@@ -81,11 +83,11 @@ nwfpe_enter:
mov r6, r0 @ save the opcode
emulate:
ldr r1, [sp, #S_PSR] @ fetch the PSR
- bl checkCondition @ check the condition
- cmp r0, #0 @ r0 = 0 ==> condition failed
+ bl arm_check_condition @ check the condition
+ cmp r0, #ARM_OPCODE_CONDTEST_PASS @ condition passed?
@ if condition code failed to match, next insn
- beq next @ get the next instruction;
+ bne next @ get the next instruction;
mov r0, r6 @ prepare for EmulateAll()
bl EmulateAll @ emulate the instruction
diff --git a/arch/arm/nwfpe/fpopcode.c b/arch/arm/nwfpe/fpopcode.c
index 922b8110758..ff983467308 100644
--- a/arch/arm/nwfpe/fpopcode.c
+++ b/arch/arm/nwfpe/fpopcode.c
@@ -61,29 +61,3 @@ const float32 float32Constant[] = {
0x41200000 /* single 10.0 */
};
-/* condition code lookup table
- index into the table is test code: EQ, NE, ... LT, GT, AL, NV
- bit position in short is condition code: NZCV */
-static const unsigned short aCC[16] = {
- 0xF0F0, // EQ == Z set
- 0x0F0F, // NE
- 0xCCCC, // CS == C set
- 0x3333, // CC
- 0xFF00, // MI == N set
- 0x00FF, // PL
- 0xAAAA, // VS == V set
- 0x5555, // VC
- 0x0C0C, // HI == C set && Z clear
- 0xF3F3, // LS == C clear || Z set
- 0xAA55, // GE == (N==V)
- 0x55AA, // LT == (N!=V)
- 0x0A05, // GT == (!Z && (N==V))
- 0xF5FA, // LE == (Z || (N!=V))
- 0xFFFF, // AL always
- 0 // NV
-};
-
-unsigned int checkCondition(const unsigned int opcode, const unsigned int ccodes)
-{
- return (aCC[opcode >> 28] >> (ccodes >> 28)) & 1;
-}
diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h
index 786e4c96156..78f02dbfaa8 100644
--- a/arch/arm/nwfpe/fpopcode.h
+++ b/arch/arm/nwfpe/fpopcode.h
@@ -475,9 +475,6 @@ static inline unsigned int getDestinationSize(const unsigned int opcode)
return (nRc);
}
-extern unsigned int checkCondition(const unsigned int opcode,
- const unsigned int ccodes);
-
extern const float64 float64Constant[];
extern const float32 float32Constant[];
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index c074e66ad22..4e0a371630b 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -116,7 +116,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
return oprofile_perf_init(ops);
}
-void __exit oprofile_arch_exit(void)
+void oprofile_arch_exit(void)
{
oprofile_perf_exit();
}
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index 90f7153a8d7..a99dc15a70f 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ARCH_IOP32X) += time.o
obj-$(CONFIG_ARCH_IOP32X) += cp6.o
obj-$(CONFIG_ARCH_IOP32X) += adma.o
obj-$(CONFIG_ARCH_IOP32X) += pmu.o
+obj-$(CONFIG_ARCH_IOP32X) += restart.o
# IOP33X
obj-$(CONFIG_ARCH_IOP33X) += gpio.o
@@ -23,6 +24,7 @@ obj-$(CONFIG_ARCH_IOP33X) += time.o
obj-$(CONFIG_ARCH_IOP33X) += cp6.o
obj-$(CONFIG_ARCH_IOP33X) += adma.o
obj-$(CONFIG_ARCH_IOP33X) += pmu.o
+obj-$(CONFIG_ARCH_IOP33X) += restart.o
# IOP13XX
obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
diff --git a/arch/arm/plat-iop/restart.c b/arch/arm/plat-iop/restart.c
new file mode 100644
index 00000000000..6a85a0c502e
--- /dev/null
+++ b/arch/arm/plat-iop/restart.c
@@ -0,0 +1,19 @@
+/*
+ * restart.c
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/hardware/iop3xx.h>
+#include <mach/hardware.h>
+
+void iop3xx_restart(char mode, const char *cmd)
+{
+ *IOP3XX_PCSR = 0x30;
+
+ /* Jump into ROM at address 0 */
+ soft_restart(0);
+}
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 568dd0223d1..cbfbbe46178 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,7 +18,6 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>
-#include <linux/sched.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
@@ -52,21 +51,12 @@ static struct clocksource iop_clocksource = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static DEFINE_CLOCK_DATA(cd);
-
/*
* IOP sched_clock() implementation via its clocksource.
*/
-unsigned long long notrace sched_clock(void)
+static u32 notrace iop_read_sched_clock(void)
{
- u32 cyc = 0xffffffffu - read_tcr1();
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace iop_update_sched_clock(void)
-{
- u32 cyc = 0xffffffffu - read_tcr1();
- update_sched_clock(&cd, cyc, (u32)~0);
+ return 0xffffffffu - read_tcr1();
}
/*
@@ -152,7 +142,7 @@ void __init iop_init_time(unsigned long tick_rate)
{
u32 timer_ctl;
- init_sched_clock(&cd, iop_update_sched_clock, 32, tick_rate);
+ setup_sched_clock(iop_read_sched_clock, 32, tick_rate);
ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
iop_tick_rate = tick_rate;
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b3a1f2b3ada..b30708e28c1 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7
bool "i.MX3, i.MX6"
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
+ select MIGHT_HAVE_CACHE_L2X0
help
This enables support for systems based on the Freescale i.MX3 and i.MX6
family.
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index adbff706ef6..73db34bf588 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -98,7 +98,7 @@ static int mxc_set_target(struct cpufreq_policy *policy,
return ret;
}
-static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
+static int mxc_cpufreq_init(struct cpufreq_policy *policy)
{
int ret;
int i;
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 6698cae942f..83cca9bcfc9 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -71,8 +71,8 @@ extern int mx6q_clocks_init(void);
extern struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_restart(char, const char *);
extern void mxc_arch_reset_init(void __iomem *);
-extern void mx51_efikamx_reset(void);
extern int mx53_revision(void);
extern int mx53_display_revision(void);
@@ -121,6 +121,7 @@ static inline void imx_smp_prepare(void) {}
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
extern void imx_src_init(void);
+extern void imx_src_prepare_restart(void);
extern void imx_gpc_init(void);
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index b9895d25016..13ad0df2e86 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -22,6 +22,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-void arch_reset(char mode, const char *cmd);
-
#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 88fd4045256..477971b0093 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -98,6 +98,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
case MACH_TYPE_PCM043:
case MACH_TYPE_LILLY1131:
case MACH_TYPE_VPR200:
+ case MACH_TYPE_EUKREA_CPUIMX35SD:
uart_base = MX3X_UART1_BASE_ADDR;
break;
case MACH_TYPE_MAGX_ZN5:
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 845de59f07e..e032717f7d0 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -77,6 +77,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
do_div(c, period_ns);
duty_cycles = c;
+ /*
+ * according to imx pwm RM, the real period value should be
+ * PERIOD value in PWMPR plus 2.
+ */
+ if (period_cycles > 2)
+ period_cycles -= 2;
+ else
+ period_cycles = 0;
+
writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 7e5c76ea446..3599bf2cfd4 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -37,17 +37,10 @@ static void __iomem *wdog_base;
/*
* Reset the system. It is called by machine_restart().
*/
-void arch_reset(char mode, const char *cmd)
+void mxc_restart(char mode, const char *cmd)
{
unsigned int wcr_enable;
-#ifdef CONFIG_MACH_MX51_EFIKAMX
- if (machine_is_mx51_efikamx()) {
- mx51_efikamx_reset();
- return;
- }
-#endif
-
if (cpu_is_mx1()) {
wcr_enable = (1 << 0);
} else {
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 4b0fe285e83..1c96cdb4c35 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -108,18 +108,9 @@ static void gpt_irq_acknowledge(void)
static void __iomem *sched_clock_reg;
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 notrace mxc_read_sched_clock(void)
{
- cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
-
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace mxc_update_sched_clock(void)
-{
- cycle_t cyc = sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
}
static int __init mxc_clocksource_init(struct clk *timer_clk)
@@ -129,7 +120,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
sched_clock_reg = reg;
- init_sched_clock(&cd, mxc_update_sched_clock, 32, c);
+ setup_sched_clock(mxc_read_sched_clock, 32, c);
return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
clocksource_mmio_readl_up);
}
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 30b6433d910..ad1b45b605a 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -17,7 +17,6 @@
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/err.h>
-#include <linux/sched.h>
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
@@ -79,23 +78,12 @@ void __iomem *mtu_base; /* Assigned by machine code */
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel.
*/
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace nomadik_read_sched_clock(void)
{
- u32 cyc;
-
if (unlikely(!mtu_base))
return 0;
- cyc = -readl(mtu_base + MTU_VAL(0));
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void notrace nomadik_update_sched_clock(void)
-{
- u32 cyc = -readl(mtu_base + MTU_VAL(0));
- update_sched_clock(&cd, cyc, (u32)~0);
+ return -readl(mtu_base + MTU_VAL(0));
}
#endif
@@ -231,9 +219,11 @@ void __init nmdk_timer_init(void)
rate, 200, 32, clocksource_mmio_readl_down))
pr_err("timer: failed to initialize clock source %s\n",
"mtu_0");
+
#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
- init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
+ setup_sched_clock(nomadik_read_sched_clock, 32, rate);
#endif
+
/* Timer 1 is used for events */
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index a6cbb712da5..5f0f2292b7f 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -17,7 +17,6 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/sched.h>
#include <linux/clocksource.h>
#include <asm/sched_clock.h>
@@ -37,41 +36,9 @@ static void __iomem *timer_32k_base;
#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
-/*
- * Returns current time from boot in nsecs. It's OK for this to wrap
- * around for now, as it's just a relative time stamp.
- */
-static DEFINE_CLOCK_DATA(cd);
-
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 32768, NSEC_PER_SEC, 60).
- * This gives a resolution of about 30us and a wrap period of about 36hrs.
- */
-#define SC_MULT 4000000000u
-#define SC_SHIFT 17
-
-static inline unsigned long long notrace _omap_32k_sched_clock(void)
-{
- u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
-}
-
-#if defined(CONFIG_OMAP_32K_TIMER) && !defined(CONFIG_OMAP_MPU_TIMER)
-unsigned long long notrace sched_clock(void)
-{
- return _omap_32k_sched_clock();
-}
-#else
-unsigned long long notrace omap_32k_sched_clock(void)
-{
- return _omap_32k_sched_clock();
-}
-#endif
-
-static void notrace omap_update_sched_clock(void)
+static u32 notrace omap_32k_read_sched_clock(void)
{
- u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
- update_sched_clock(&cd, cyc, (u32)~0);
+ return timer_32k_base ? __raw_readl(timer_32k_base) : 0;
}
/**
@@ -147,8 +114,7 @@ int __init omap_init_clocksource_32k(void)
clocksource_mmio_readl_up))
printk(err, "32k_counter");
- init_fixed_sched_clock(&cd, omap_update_sched_clock, 32,
- 32768, SC_MULT, SC_SHIFT);
+ setup_sched_clock(omap_32k_read_sched_clock, 32, 32768);
}
return 0;
}
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 257f9770b2d..b4d7ec3fbfb 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -31,7 +31,6 @@
#include <plat/omap_hwmod.h>
extern int __init omap_init_clocksource_32k(void);
-extern unsigned long long notrace omap_32k_sched_clock(void);
extern void omap_reserve(void);
extern int omap_dss_reset(struct omap_hwmod *);
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
index c5fa9e92900..8e5ebd74b12 100644
--- a/arch/arm/plat-omap/include/plat/system.h
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -12,6 +12,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-extern void (*arch_reset)(char, const char *);
-
#endif
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 41ab97ebe4c..10d16088813 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -384,12 +384,16 @@ void __init orion_gpio_init(int gpio_base, int ngpio,
struct orion_gpio_chip *ochip;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
+ char gc_label[16];
if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips))
return;
+ snprintf(gc_label, sizeof(gc_label), "orion_gpio%d",
+ orion_gpio_chip_count);
+
ochip = orion_gpio_chips + orion_gpio_chip_count;
- ochip->chip.label = "orion_gpio";
+ ochip->chip.label = kstrdup(gc_label, GFP_KERNEL);
ochip->chip.request = orion_gpio_request;
ochip->chip.direction_input = orion_gpio_direction_input;
ochip->chip.get = orion_gpio_get;
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 69a61367e4b..1ed8d1397fc 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -12,7 +12,6 @@
*/
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
@@ -60,24 +59,10 @@ static u32 ticks_per_jiffy;
* Orion's sched_clock implementation. It has a resolution of
* at least 7.5ns (133MHz TCLK).
*/
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 notrace orion_read_sched_clock(void)
{
- u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
-}
-
-
-static void notrace orion_update_sched_clock(void)
-{
- u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
- update_sched_clock(&cd, cyc, (u32)~0);
-}
-
-static void __init setup_sched_clock(unsigned long tclk)
-{
- init_sched_clock(&cd, orion_update_sched_clock, 32, tclk);
+ return ~readl(timer_base + TIMER0_VAL_OFF);
}
/*
@@ -217,7 +202,7 @@ orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
/*
* Set scale and timer for sched_clock.
*/
- setup_sched_clock(tclk);
+ setup_sched_clock(orion_read_sched_clock, 32, tclk);
/*
* Setup free-running clocksource timer (interrupts
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 3c6335307fb..1121df13e15 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -192,27 +192,6 @@ static unsigned long s3c24xx_read_idcode_v4(void)
return __raw_readl(S3C2410_GSTATUS1);
}
-/* Hook for arm_pm_restart to ensure we execute the reset code
- * with the caches enabled. It seems at least the S3C2440 has a problem
- * resetting if there is bus activity interrupted by the reset.
- */
-static void s3c24xx_pm_restart(char mode, const char *cmd)
-{
- if (mode != 's') {
- unsigned long flags;
-
- local_irq_save(flags);
- __cpuc_flush_kern_all();
- __cpuc_flush_user_all();
-
- arch_reset(mode, cmd);
- local_irq_restore(flags);
- }
-
- /* fallback, or unhandled */
- arm_machine_restart(mode, cmd);
-}
-
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
/* initialise the io descriptors we need for initialisation */
@@ -226,7 +205,5 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
}
s3c24xx_init_cpu();
- arm_pm_restart = s3c24xx_pm_restart;
-
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 53754bcf15a..9fe35348e03 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1437,11 +1437,10 @@ int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
size_t map_sz = sizeof(*nmap) * sel->map_size;
int ptr;
- nmap = kmalloc(map_sz, GFP_KERNEL);
+ nmap = kmemdup(sel->map, map_sz, GFP_KERNEL);
if (nmap == NULL)
return -ENOMEM;
- memcpy(nmap, sel->map, map_sz);
memcpy(&dma_sel, sel, sizeof(*sel));
dma_sel.map = nmap;
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 5a21b15b2a9..95e68190d59 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -297,13 +297,6 @@ static struct clksrc_clk clk_usb_bus_host = {
static struct clksrc_clk clksrc_clks[] = {
{
- /* ART baud-rate clock sourced from esysclk via a divisor */
- .clk = {
- .name = "uartclk",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
- }, {
/* camera interface bus-clock, divided down from esysclk */
.clk = {
.name = "camif-upll", /* same as 2440 name */
@@ -323,6 +316,15 @@ static struct clksrc_clk clksrc_clks[] = {
},
};
+static struct clksrc_clk clk_esys_uart = {
+ /* ART baud-rate clock sourced from esysclk via a divisor */
+ .clk = {
+ .name = "uartclk",
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
+};
+
static struct clk clk_i2s_ext = {
.name = "i2s-ext",
};
@@ -425,12 +427,6 @@ static struct clk init_clocks[] = {
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA5,
}, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_HSMMC,
- }, {
.name = "gpio",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
@@ -512,6 +508,14 @@ static struct clk init_clocks[] = {
}
};
+static struct clk hsmmc1_clk = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_HSMMC,
+};
+
static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
{
clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
@@ -577,6 +581,7 @@ static struct clk *clks[] __initdata = {
&clk_epll,
&clk_usb_bus,
&clk_armdiv,
+ &hsmmc1_clk,
};
static struct clksrc_clk *clksrcs[] __initdata = {
@@ -589,6 +594,13 @@ static struct clksrc_clk *clksrcs[] __initdata = {
&clk_arm,
};
+static struct clk_lookup s3c2443_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
+};
+
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
unsigned int *divs, int nr_divs,
int divmask)
@@ -618,6 +630,7 @@ void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
/* See s3c2443/etc notes on disabling clocks at init time */
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
s3c2443_common_setup_clocks(get_mpll);
}
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 876344038b8..30d8c3016e6 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -13,7 +13,6 @@ obj- :=
# Core files
obj-y += dev-uart.o
-obj-y += cpu.o
obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
deleted file mode 100644
index a56959e8351..00000000000
--- a/arch/arm/plat-s5p/cpu.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/* linux/arch/arm/plat-s5p/cpu.c
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/s5p6440.h>
-#include <plat/s5p6450.h>
-#include <plat/s5pc100.h>
-#include <plat/s5pv210.h>
-#include <plat/exynos4.h>
-
-/* table of supported CPUs */
-
-static const char name_s5p6440[] = "S5P6440";
-static const char name_s5p6450[] = "S5P6450";
-static const char name_s5pc100[] = "S5PC100";
-static const char name_s5pv210[] = "S5PV210/S5PC110";
-static const char name_exynos4210[] = "EXYNOS4210";
-static const char name_exynos4212[] = "EXYNOS4212";
-static const char name_exynos4412[] = "EXYNOS4412";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S5P6440_CPU_ID,
- .idmask = S5P64XX_CPU_MASK,
- .map_io = s5p6440_map_io,
- .init_clocks = s5p6440_init_clocks,
- .init_uarts = s5p6440_init_uarts,
- .init = s5p64x0_init,
- .name = name_s5p6440,
- }, {
- .idcode = S5P6450_CPU_ID,
- .idmask = S5P64XX_CPU_MASK,
- .map_io = s5p6450_map_io,
- .init_clocks = s5p6450_init_clocks,
- .init_uarts = s5p6450_init_uarts,
- .init = s5p64x0_init,
- .name = name_s5p6450,
- }, {
- .idcode = S5PC100_CPU_ID,
- .idmask = S5PC100_CPU_MASK,
- .map_io = s5pc100_map_io,
- .init_clocks = s5pc100_init_clocks,
- .init_uarts = s5pc100_init_uarts,
- .init = s5pc100_init,
- .name = name_s5pc100,
- }, {
- .idcode = S5PV210_CPU_ID,
- .idmask = S5PV210_CPU_MASK,
- .map_io = s5pv210_map_io,
- .init_clocks = s5pv210_init_clocks,
- .init_uarts = s5pv210_init_uarts,
- .init = s5pv210_init,
- .name = name_s5pv210,
- }, {
- .idcode = EXYNOS4210_CPU_ID,
- .idmask = EXYNOS4_CPU_MASK,
- .map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
- .init = exynos_init,
- .name = name_exynos4210,
- }, {
- .idcode = EXYNOS4212_CPU_ID,
- .idmask = EXYNOS4_CPU_MASK,
- .map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
- .init = exynos_init,
- .name = name_exynos4212,
- }, {
- .idcode = EXYNOS4412_CPU_ID,
- .idmask = EXYNOS4_CPU_MASK,
- .map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
- .init = exynos_init,
- .name = name_exynos4412,
- },
-};
-
-/* minimal IO mapping */
-
-static struct map_desc s5p_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(S5P_PA_CHIPID),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S5P_PA_SYSCON),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S5P_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S3C_PA_WDT),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SROMC,
- .pfn = __phys_to_pfn(S5P_PA_SROMC),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
-/* read cpu identification code */
-
-void __init s5p_init_io(struct map_desc *mach_desc,
- int size, void __iomem *cpuid_addr)
-{
- /* initialize the io descriptors we need for initialization */
- iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
- if (mach_desc)
- iotable_init(mach_desc, size);
-
- /* detect cpu id and rev. */
- s5p_init_cpu(cpuid_addr);
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c
index c833e7b5759..17c0a2c58df 100644
--- a/arch/arm/plat-s5p/s5p-time.c
+++ b/arch/arm/plat-s5p/s5p-time.c
@@ -10,7 +10,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/err.h>
@@ -321,26 +320,14 @@ static void __iomem *s5p_timer_reg(void)
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by U300 implementation.)
*/
-static DEFINE_CLOCK_DATA(cd);
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace s5p_read_sched_clock(void)
{
void __iomem *reg = s5p_timer_reg();
if (!reg)
return 0;
- return cyc_to_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
-}
-
-static void notrace s5p_update_sched_clock(void)
-{
- void __iomem *reg = s5p_timer_reg();
-
- if (!reg)
- return;
-
- update_sched_clock(&cd, ~__raw_readl(reg), (u32)~0);
+ return ~__raw_readl(reg);
}
static void __init s5p_clocksource_init(void)
@@ -358,7 +345,7 @@ static void __init s5p_clocksource_init(void)
s5p_time_setup(timer_source.source_id, TCNT_MAX);
s5p_time_start(timer_source.source_id, PERIODIC);
- init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
+ setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
clock_rate, 250, 32, clocksource_mmio_readl_down))
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index bb0af66bb48..6a2abe67c8b 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -234,11 +234,23 @@ config SAMSUNG_DEV_IDE
help
Compile in platform device definitions for IDE
-config S3C64XX_DEV_SPI
+config S3C64XX_DEV_SPI0
bool
help
Compile in platform device definitions for S3C64XX's type
- SPI controllers.
+ SPI controller 0
+
+config S3C64XX_DEV_SPI1
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controller 1
+
+config S3C64XX_DEV_SPI2
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controller 2
config SAMSUNG_DEV_TS
bool
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 4ca8b571f97..de0d88d6a0f 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -61,6 +61,7 @@
#include <plat/regs-iic.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
+#include <plat/s3c64xx-spi.h>
static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
@@ -1461,3 +1462,129 @@ struct platform_device s3c_device_wdt = {
.resource = s3c_wdt_resource,
};
#endif /* CONFIG_S3C_DEV_WDT */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+static struct resource s3c64xx_spi0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
+ [1] = DEFINE_RES_DMA(DMACH_SPI0_TX),
+ [2] = DEFINE_RES_DMA(DMACH_SPI0_RX),
+ [3] = DEFINE_RES_IRQ(IRQ_SPI0),
+};
+
+struct platform_device s3c64xx_device_spi0 = {
+ .name = "s3c64xx-spi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource),
+ .resource = s3c64xx_spi0_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs)
+{
+ if (!pd) {
+ pr_err("%s:Need to pass platform data\n", __func__);
+ return;
+ }
+
+ /* Reject invalid configuration */
+ if (!num_cs || src_clk_nr < 0) {
+ pr_err("%s: Invalid SPI configuration\n", __func__);
+ return;
+ }
+
+ pd->num_cs = num_cs;
+ pd->src_clk_nr = src_clk_nr;
+ if (!pd->cfg_gpio)
+ pd->cfg_gpio = s3c64xx_spi0_cfg_gpio;
+
+ s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI0 */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+static struct resource s3c64xx_spi1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
+ [1] = DEFINE_RES_DMA(DMACH_SPI1_TX),
+ [2] = DEFINE_RES_DMA(DMACH_SPI1_RX),
+ [3] = DEFINE_RES_IRQ(IRQ_SPI1),
+};
+
+struct platform_device s3c64xx_device_spi1 = {
+ .name = "s3c64xx-spi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
+ .resource = s3c64xx_spi1_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs)
+{
+ if (!pd) {
+ pr_err("%s:Need to pass platform data\n", __func__);
+ return;
+ }
+
+ /* Reject invalid configuration */
+ if (!num_cs || src_clk_nr < 0) {
+ pr_err("%s: Invalid SPI configuration\n", __func__);
+ return;
+ }
+
+ pd->num_cs = num_cs;
+ pd->src_clk_nr = src_clk_nr;
+ if (!pd->cfg_gpio)
+ pd->cfg_gpio = s3c64xx_spi1_cfg_gpio;
+
+ s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI1 */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+static struct resource s3c64xx_spi2_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
+ [1] = DEFINE_RES_DMA(DMACH_SPI2_TX),
+ [2] = DEFINE_RES_DMA(DMACH_SPI2_RX),
+ [3] = DEFINE_RES_IRQ(IRQ_SPI2),
+};
+
+struct platform_device s3c64xx_device_spi2 = {
+ .name = "s3c64xx-spi",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource),
+ .resource = s3c64xx_spi2_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs)
+{
+ if (!pd) {
+ pr_err("%s:Need to pass platform data\n", __func__);
+ return;
+ }
+
+ /* Reject invalid configuration */
+ if (!num_cs || src_clk_nr < 0) {
+ pr_err("%s: Invalid SPI configuration\n", __func__);
+ return;
+ }
+
+ pd->num_cs = num_cs;
+ pd->src_clk_nr = src_clk_nr;
+ if (!pd->cfg_gpio)
+ pd->cfg_gpio = s3c64xx_spi2_cfg_gpio;
+
+ s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI2 */
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 93a994a5dd8..2cded872f22 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -18,23 +18,24 @@
#include <mach/dma.h>
-static inline bool pl330_filter(struct dma_chan *chan, void *param)
-{
- struct dma_pl330_peri *peri = chan->private;
- return peri->peri_id == (unsigned)param;
-}
-
static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
struct samsung_dma_info *info)
{
struct dma_chan *chan;
dma_cap_mask_t mask;
struct dma_slave_config slave_config;
+ void *filter_param;
dma_cap_zero(mask);
dma_cap_set(info->cap, mask);
- chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
+ /*
+ * If a dma channel property of a device node from device tree is
+ * specified, use that as the fliter parameter.
+ */
+ filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop :
+ (void *)dma_ch;
+ chan = dma_request_channel(mask, pl330_filter, filter_param);
if (info->direction == DMA_FROM_DEVICE) {
memset(&slave_config, 0, sizeof(struct dma_slave_config));
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index dac4760c0f0..95509d8eb14 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -202,14 +202,6 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
-extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
-extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
- struct s3c_cpufreq_config *cfg,
- union s3c_iobank *iob);
-
#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
#define s3c_cpufreq_debugfs_call(x) x
#else
@@ -226,6 +218,10 @@ extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
#ifdef CONFIG_S3C2410_IOTIMING
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
@@ -235,6 +231,7 @@ extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
#else
+#define s3c2410_iotiming_debugfs NULL
#define s3c2410_iotiming_calc NULL
#define s3c2410_iotiming_get NULL
#define s3c2410_iotiming_set NULL
@@ -242,8 +239,10 @@ extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
/* S3C2412 compatible routines */
-extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
- struct s3c_iotimings *timings);
+#ifdef CONFIG_S3C2412_IOTIMING
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *timings);
@@ -253,6 +252,12 @@ extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
+#else
+#define s3c2412_iotiming_debugfs NULL
+#define s3c2412_iotiming_calc NULL
+#define s3c2412_iotiming_get NULL
+#define s3c2412_iotiming_set NULL
+#endif /* CONFIG_S3C2412_IOTIMING */
#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
#define s3c_freq_dbg(x...) printk(KERN_INFO x)
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 40fd7b6b5e6..258d9d8a94f 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -152,13 +152,9 @@ extern void s3c_init_cpu(unsigned long idcode,
/* core initialisation functions */
extern void s3c24xx_init_irq(void);
-extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
extern void s5p_init_irq(u32 *vic, u32 num_vic);
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-extern void s5p_init_io(struct map_desc *mach_desc,
- int size, void __iomem *cpuid_addr);
extern void s3c24xx_init_cpu(void);
extern void s3c64xx_init_cpu(void);
@@ -183,7 +179,6 @@ extern struct syscore_ops s3c2410_pm_syscore_ops;
extern struct syscore_ops s3c2412_pm_syscore_ops;
extern struct syscore_ops s3c2416_pm_syscore_ops;
extern struct syscore_ops s3c244x_pm_syscore_ops;
-extern struct syscore_ops s3c64xx_irq_syscore_ops;
/* system device classes */
@@ -195,7 +190,6 @@ extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
extern struct sysdev_class s3c2443_sysclass;
extern struct sysdev_class s3c6410_sysclass;
-extern struct sysdev_class s3c64xx_sysclass;
extern struct sysdev_class s5p64x0_sysclass;
extern struct sysdev_class s5pv210_sysclass;
extern struct sysdev_class exynos4_sysclass;
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index ab633c9c2ae..83b1e31696d 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -39,6 +39,7 @@ extern struct platform_device s3c64xx_device_pcm0;
extern struct platform_device s3c64xx_device_pcm1;
extern struct platform_device s3c64xx_device_spi0;
extern struct platform_device s3c64xx_device_spi1;
+extern struct platform_device s3c64xx_device_spi2;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_cfcon;
@@ -98,8 +99,6 @@ extern struct platform_device s5p6450_device_iis1;
extern struct platform_device s5p6450_device_iis2;
extern struct platform_device s5p6450_device_pcm0;
-extern struct platform_device s5p64x0_device_spi0;
-extern struct platform_device s5p64x0_device_spi1;
extern struct platform_device s5pc100_device_ac97;
extern struct platform_device s5pc100_device_iis0;
@@ -108,9 +107,6 @@ extern struct platform_device s5pc100_device_iis2;
extern struct platform_device s5pc100_device_pcm0;
extern struct platform_device s5pc100_device_pcm1;
extern struct platform_device s5pc100_device_spdif;
-extern struct platform_device s5pc100_device_spi0;
-extern struct platform_device s5pc100_device_spi1;
-extern struct platform_device s5pc100_device_spi2;
extern struct platform_device s5pv210_device_ac97;
extern struct platform_device s5pv210_device_iis0;
@@ -120,8 +116,6 @@ extern struct platform_device s5pv210_device_pcm0;
extern struct platform_device s5pv210_device_pcm1;
extern struct platform_device s5pv210_device_pcm2;
extern struct platform_device s5pv210_device_spdif;
-extern struct platform_device s5pv210_device_spi0;
-extern struct platform_device s5pv210_device_spi1;
extern struct platform_device exynos4_device_ac97;
extern struct platform_device exynos4_device_ahci;
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
index 4c1a363526c..22eafc310bd 100644
--- a/arch/arm/plat-samsung/include/plat/dma-ops.h
+++ b/arch/arm/plat-samsung/include/plat/dma-ops.h
@@ -31,6 +31,7 @@ struct samsung_dma_info {
enum dma_slave_buswidth width;
dma_addr_t fifo;
struct s3c2410_dma_client *client;
+ struct property *dt_dmach_prop;
};
struct samsung_dma_ops {
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index 2e55e595867..c5eaad529de 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -21,7 +21,8 @@
* use these just as IDs.
*/
enum dma_ch {
- DMACH_UART0_RX,
+ DMACH_DT_PROP = -1,
+ DMACH_UART0_RX = 0,
DMACH_UART0_TX,
DMACH_UART1_RX,
DMACH_UART1_TX,
diff --git a/arch/arm/plat-samsung/include/plat/exynos4.h b/arch/arm/plat-samsung/include/plat/exynos4.h
deleted file mode 100644
index f546e88ebc9..00000000000
--- a/arch/arm/plat-samsung/include/plat/exynos4.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/exynos4.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for exynos4 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for EXYNOS4 related SoCs */
-
-extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void exynos4_register_clocks(void);
-extern void exynos4210_register_clocks(void);
-extern void exynos4212_register_clocks(void);
-extern void exynos4_setup_clocks(void);
-
-#ifdef CONFIG_ARCH_EXYNOS
-extern int exynos_init(void);
-extern void exynos4_init_irq(void);
-extern void exynos4_map_io(void);
-extern void exynos4_init_clocks(int xtal);
-extern struct sys_timer exynos4_timer;
-
-#define exynos4_init_uarts exynos4_common_init_uarts
-
-#else
-#define exynos4_init_clocks NULL
-#define exynos4_init_uarts NULL
-#define exynos4_map_io NULL
-#define exynos_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
index 08d1a7ef97b..df46b776976 100644
--- a/arch/arm/plat-samsung/include/plat/irqs.h
+++ b/arch/arm/plat-samsung/include/plat/irqs.h
@@ -44,13 +44,14 @@
#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
-#define S5P_TIMER_IRQ(x) (11 + (x))
+#define S5P_TIMER_IRQ(x) (IRQ_TIMER_BASE + (x))
#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
#define IRQ_TIMER2 S5P_TIMER_IRQ(2)
#define IRQ_TIMER3 S5P_TIMER_IRQ(3)
#define IRQ_TIMER4 S5P_TIMER_IRQ(4)
+#define IRQ_TIMER_COUNT (5)
#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
: ((x) - 16 + S5P_EINT_BASE2))
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index 72073484702..29c26a81884 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -71,6 +71,7 @@
#define S3C2410_LCON_IRM (1<<6)
#define S3C2440_UCON_CLKMASK (3<<10)
+#define S3C2440_UCON_CLKSHIFT (10)
#define S3C2440_UCON_PCLK (0<<10)
#define S3C2440_UCON_UCLK (1<<10)
#define S3C2440_UCON_PCLK2 (2<<10)
@@ -78,6 +79,7 @@
#define S3C2443_UCON_EPLL (3<<10)
#define S3C6400_UCON_CLKMASK (3<<10)
+#define S3C6400_UCON_CLKSHIFT (10)
#define S3C6400_UCON_PCLK (0<<10)
#define S3C6400_UCON_PCLK2 (2<<10)
#define S3C6400_UCON_UCLK0 (1<<10)
@@ -90,11 +92,14 @@
#define S3C2440_UCON_DIVSHIFT (12)
#define S3C2412_UCON_CLKMASK (3<<10)
+#define S3C2412_UCON_CLKSHIFT (10)
#define S3C2412_UCON_UCLK (1<<10)
#define S3C2412_UCON_USYSCLK (3<<10)
#define S3C2412_UCON_PCLK (0<<10)
#define S3C2412_UCON_PCLK2 (2<<10)
+#define S3C2410_UCON_CLKMASK (1 << 10)
+#define S3C2410_UCON_CLKSHIFT (10)
#define S3C2410_UCON_UCLK (1<<10)
#define S3C2410_UCON_SBREAK (1<<4)
@@ -193,6 +198,7 @@
/* Following are specific to S5PV210 */
#define S5PV210_UCON_CLKMASK (1<<10)
+#define S5PV210_UCON_CLKSHIFT (10)
#define S5PV210_UCON_PCLK (0<<10)
#define S5PV210_UCON_UCLK (1<<10)
@@ -221,29 +227,24 @@
#define S5PV210_UFSTAT_RXMASK (255<<0)
#define S5PV210_UFSTAT_RXSHIFT (0)
-#define NO_NEED_CHECK_CLKSRC 1
+#define S3C2410_UCON_CLKSEL0 (1 << 0)
+#define S3C2410_UCON_CLKSEL1 (1 << 1)
+#define S3C2410_UCON_CLKSEL2 (1 << 2)
+#define S3C2410_UCON_CLKSEL3 (1 << 3)
-#ifndef __ASSEMBLY__
+/* Default values for s5pv210 UCON and UFCON uart registers */
+#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
-/* struct s3c24xx_uart_clksrc
- *
- * this structure defines a named clock source that can be used for the
- * uart, so that the best clock can be selected for the requested baud
- * rate.
- *
- * min_baud and max_baud define the range of baud-rates this clock is
- * acceptable for, if they are both zero, it is assumed any baud rate that
- * can be generated from this clock will be used.
- *
- * divisor gives the divisor from the clock to the one seen by the uart
-*/
+#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
-struct s3c24xx_uart_clksrc {
- const char *name;
- unsigned int divisor;
- unsigned int min_baud;
- unsigned int max_baud;
-};
+#ifndef __ASSEMBLY__
/* configuration structure for per-machine configurations for the
* serial port
@@ -257,15 +258,13 @@ struct s3c2410_uartcfg {
unsigned char unused;
unsigned short flags;
upf_t uart_flags; /* default uart flags */
+ unsigned int clk_sel;
unsigned int has_fracval;
unsigned long ucon; /* value of ucon for port */
unsigned long ulcon; /* value of ulcon for port */
unsigned long ufcon; /* value of ufcon for port */
-
- struct s3c24xx_uart_clksrc *clocks;
- unsigned int clocks_size;
};
/* s3c24xx_uart_devs
diff --git a/arch/arm/plat-samsung/include/plat/reset.h b/arch/arm/plat-samsung/include/plat/reset.h
deleted file mode 100644
index 32ca5179c6e..00000000000
--- a/arch/arm/plat-samsung/include/plat/reset.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_RESET_H
-#define __PLAT_SAMSUNG_RESET_H __FILE__
-
-extern void (*s5p_reset_hook)(void);
-
-#endif /* __PLAT_SAMSUNG_RESET_H */
diff --git a/arch/arm/plat-samsung/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h
index 5bcfd143ba1..cbae50ddacc 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2412.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2412.h
@@ -21,9 +21,12 @@ extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c2412_init_clocks(int xtal);
extern int s3c2412_baseclk_add(void);
+
+extern void s3c2412_restart(char mode, const char *cmd);
#else
#define s3c2412_init_clocks NULL
#define s3c2412_init_uarts NULL
#define s3c2412_map_io NULL
#define s3c2412_init NULL
+#define s3c2412_restart NULL
#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
index a764f8503f5..de2b5bdc5eb 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2416.h
@@ -23,9 +23,11 @@ extern void s3c2416_init_clocks(int xtal);
extern int s3c2416_baseclk_add(void);
+extern void s3c2416_restart(char mode, const char *cmd);
#else
#define s3c2416_init_clocks NULL
#define s3c2416_init_uarts NULL
#define s3c2416_map_io NULL
#define s3c2416_init NULL
+#define s3c2416_restart NULL
#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
index 7fae1a05069..dce05b43d51 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -24,11 +24,13 @@ extern void s3c2443_init_clocks(int xtal);
extern int s3c2443_baseclk_add(void);
+extern void s3c2443_restart(char mode, const char *cmd);
#else
#define s3c2443_init_clocks NULL
#define s3c2443_init_uarts NULL
#define s3c2443_map_io NULL
#define s3c2443_init NULL
+#define s3c2443_restart NULL
#endif
/* common code used by s3c2443 and others.
diff --git a/arch/arm/plat-samsung/include/plat/s3c6400.h b/arch/arm/plat-samsung/include/plat/s3c6400.h
deleted file mode 100644
index 37d428aaaeb..00000000000
--- a/arch/arm/plat-samsung/include/plat/s3c6400.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S3C6400 related SoCs */
-
-extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_setup_clocks(void);
-
-extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-
-#ifdef CONFIG_CPU_S3C6400
-
-extern int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
-
-#define s3c6400_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6400_init_clocks NULL
-#define s3c6400_init_uarts NULL
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c6410.h b/arch/arm/plat-samsung/include/plat/s3c6410.h
deleted file mode 100644
index 20a6675b9d1..00000000000
--- a/arch/arm/plat-samsung/include/plat/s3c6410.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6410 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C6410
-
-extern int s3c6410_init(void);
-extern void s3c6410_init_irq(void);
-extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
-
-#define s3c6410_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6410_init_clocks NULL
-#define s3c6410_init_uarts NULL
-#define s3c6410_map_io NULL
-#define s3c6410_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index 4c16fa3621b..aea68b60ef9 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -31,7 +31,6 @@ struct s3c64xx_spi_csinfo {
/**
* struct s3c64xx_spi_info - SPI Controller defining structure
* @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @src_clk_name: Platform name of the corresponding clock.
* @clk_from_cmu: If the SPI clock/prescalar control block is present
* by the platform's clock-management-unit and not in SPI controller.
* @num_cs: Number of CS this controller emulates.
@@ -43,7 +42,6 @@ struct s3c64xx_spi_csinfo {
*/
struct s3c64xx_spi_info {
int src_clk_nr;
- char *src_clk_name;
bool clk_from_cmu;
int num_cs;
@@ -58,18 +56,28 @@ struct s3c64xx_spi_info {
};
/**
- * s3c64xx_spi_set_info - SPI Controller configure callback by the board
+ * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
* initialization code.
- * @cntrlr: SPI controller number the configuration is for.
+ * @pd: SPI platform data to set.
* @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
* @num_cs: Number of elements in the 'cs' array.
*
* Call this from machine init code for each SPI Controller that
* has some chips attached to it.
*/
-extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs);
+extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs);
+extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs);
+/* defined by architecture to configure gpio */
+extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev);
+extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev);
+extern int s3c64xx_spi2_cfg_gpio(struct platform_device *dev);
+
+extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-samsung/include/plat/s5p6440.h b/arch/arm/plat-samsung/include/plat/s5p6440.h
deleted file mode 100644
index bf85ebbb4fb..00000000000
--- a/arch/arm/plat-samsung/include/plat/s5p6440.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p6440.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5p6440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
- /* Common init code for S5P6440 related SoCs */
-
-extern void s5p6440_register_clocks(void);
-extern void s5p6440_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6440
-
-extern int s5p64x0_init(void);
-extern void s5p6440_init_irq(void);
-extern void s5p6440_map_io(void);
-extern void s5p6440_init_clocks(int xtal);
-
-extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6440_init_clocks NULL
-#define s5p6440_init_uarts NULL
-#define s5p6440_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-/* S5P6440 timer */
-
-extern struct sys_timer s5p6440_timer;
diff --git a/arch/arm/plat-samsung/include/plat/s5p6450.h b/arch/arm/plat-samsung/include/plat/s5p6450.h
deleted file mode 100644
index da25f9a1c54..00000000000
--- a/arch/arm/plat-samsung/include/plat/s5p6450.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p6450.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for s5p6450 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5P6450 related SoCs */
-
-extern void s5p6450_register_clocks(void);
-extern void s5p6450_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6450
-
-extern int s5p64x0_init(void);
-extern void s5p6450_init_irq(void);
-extern void s5p6450_map_io(void);
-extern void s5p6450_init_clocks(int xtal);
-
-extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6450_init_clocks NULL
-#define s5p6450_init_uarts NULL
-#define s5p6450_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-/* S5P6450 timer */
-
-extern struct sys_timer s5p6450_timer;
diff --git a/arch/arm/plat-samsung/include/plat/s5pc100.h b/arch/arm/plat-samsung/include/plat/s5pc100.h
deleted file mode 100644
index 9a21aeaaf45..00000000000
--- a/arch/arm/plat-samsung/include/plat/s5pc100.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5pc100 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5PC100
-
-extern int s5pc100_init(void);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-#else
-#define s5pc100_init_clocks NULL
-#define s5pc100_init_uarts NULL
-#define s5pc100_map_io NULL
-#define s5pc100_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s5pv210.h b/arch/arm/plat-samsung/include/plat/s5pv210.h
deleted file mode 100644
index b4bc6be7707..00000000000
--- a/arch/arm/plat-samsung/include/plat/s5pv210.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5pv210.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5pv210 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PV210 related SoCs */
-
-extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pv210_register_clocks(void);
-extern void s5pv210_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5PV210
-
-extern int s5pv210_init(void);
-extern void s5pv210_init_irq(void);
-extern void s5pv210_map_io(void);
-extern void s5pv210_init_clocks(int xtal);
-
-#define s5pv210_init_uarts s5pv210_common_init_uarts
-
-#else
-#define s5pv210_init_clocks NULL
-#define s5pv210_init_uarts NULL
-#define s5pv210_map_io NULL
-#define s5pv210_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index e7b3c752e91..dcff7dd1ae8 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -66,8 +66,6 @@ struct s3c_sdhci_platdata {
enum cd_types cd_type;
enum clk_types clk_type;
- char **clocks; /* set of clock sources */
-
int ext_cd_gpio;
bool ext_cd_gpio_invert;
int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
@@ -129,12 +127,9 @@ extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
/* S3C2416 SDHCI setup */
#ifdef CONFIG_S3C2416_SETUP_SDHCI
-extern char *s3c2416_hsmmc_clksrcs[4];
-
static inline void s3c2416_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
#endif /* CONFIG_S3C_DEV_HSMMC */
}
@@ -142,7 +137,6 @@ static inline void s3c2416_default_sdhci0(void)
static inline void s3c2416_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
#endif /* CONFIG_S3C_DEV_HSMMC1 */
}
@@ -155,12 +149,9 @@ static inline void s3c2416_default_sdhci1(void) { }
/* S3C64XX SDHCI setup */
#ifdef CONFIG_S3C64XX_SETUP_SDHCI
-extern char *s3c64xx_hsmmc_clksrcs[4];
-
static inline void s3c6400_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
#endif
}
@@ -168,7 +159,6 @@ static inline void s3c6400_default_sdhci0(void)
static inline void s3c6400_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
#endif
}
@@ -176,7 +166,6 @@ static inline void s3c6400_default_sdhci1(void)
static inline void s3c6400_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
#endif
}
@@ -184,7 +173,6 @@ static inline void s3c6400_default_sdhci2(void)
static inline void s3c6410_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
#endif
}
@@ -192,7 +180,6 @@ static inline void s3c6410_default_sdhci0(void)
static inline void s3c6410_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
#endif
}
@@ -200,7 +187,6 @@ static inline void s3c6410_default_sdhci1(void)
static inline void s3c6410_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
#endif
}
@@ -218,12 +204,9 @@ static inline void s3c6400_default_sdhci2(void) { }
/* S5PC100 SDHCI setup */
#ifdef CONFIG_S5PC100_SETUP_SDHCI
-extern char *s5pc100_hsmmc_clksrcs[4];
-
static inline void s5pc100_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
#endif
}
@@ -231,7 +214,6 @@ static inline void s5pc100_default_sdhci0(void)
static inline void s5pc100_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
#endif
}
@@ -239,7 +221,6 @@ static inline void s5pc100_default_sdhci1(void)
static inline void s5pc100_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
#endif
}
@@ -254,12 +235,9 @@ static inline void s5pc100_default_sdhci2(void) { }
/* S5PV210 SDHCI setup */
#ifdef CONFIG_S5PV210_SETUP_SDHCI
-extern char *s5pv210_hsmmc_clksrcs[4];
-
static inline void s5pv210_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
#endif
}
@@ -267,7 +245,6 @@ static inline void s5pv210_default_sdhci0(void)
static inline void s5pv210_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
#endif
}
@@ -275,7 +252,6 @@ static inline void s5pv210_default_sdhci1(void)
static inline void s5pv210_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
#endif
}
@@ -283,7 +259,6 @@ static inline void s5pv210_default_sdhci2(void)
static inline void s5pv210_default_sdhci3(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC3
- s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
#endif
}
@@ -298,12 +273,9 @@ static inline void s5pv210_default_sdhci3(void) { }
/* EXYNOS4 SDHCI setup */
#ifdef CONFIG_EXYNOS4_SETUP_SDHCI
-extern char *exynos4_hsmmc_clksrcs[4];
-
static inline void exynos4_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
#endif
}
@@ -311,7 +283,6 @@ static inline void exynos4_default_sdhci0(void)
static inline void exynos4_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
#endif
}
@@ -319,7 +290,6 @@ static inline void exynos4_default_sdhci1(void)
static inline void exynos4_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
#endif
}
@@ -327,7 +297,6 @@ static inline void exynos4_default_sdhci2(void)
static inline void exynos4_default_sdhci3(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC3
- s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
#endif
}
diff --git a/arch/arm/plat-samsung/include/plat/system-reset.h b/arch/arm/plat-samsung/include/plat/system-reset.h
deleted file mode 100644
index a448e990964..00000000000
--- a/arch/arm/plat-samsung/include/plat/system-reset.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/system-reset.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
- *
- * S5P - System define for arch_reset()
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/watchdog-reset.h>
-
-void (*s5p_reset_hook)(void);
-
-static void arch_reset(char mode, const char *cmd)
-{
- /* SWRESET support in s5p_reset_hook() */
-
- if (s5p_reset_hook)
- s5p_reset_hook();
-
- /* Perform reset using Watchdog reset
- * if there is no s5p_reset_hook()
- */
-
- arch_wdt_reset();
-}
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index 40dbb2b0ae2..f19aff19205 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/delay.h>
static inline void arch_wdt_reset(void)
{
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index b4f340b8f1f..e0f2e5b9530 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,6 @@
#
# Common support
-obj-y := clock.o time.o
+obj-y := clock.o restart.o time.o
obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
index 1171f228d71..86c6f83b44c 100644
--- a/arch/arm/plat-spear/include/plat/system.h
+++ b/arch/arm/plat-spear/include/plat/system.h
@@ -14,10 +14,6 @@
#ifndef __PLAT_SYSTEM_H
#define __PLAT_SYSTEM_H
-#include <linux/io.h>
-#include <asm/hardware/sp810.h>
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
/*
@@ -27,15 +23,4 @@ static inline void arch_idle(void)
cpu_do_idle();
}
-static inline void arch_reset(char mode, const char *cmd)
-{
- if (mode == 's') {
- /* software reset, Jump into ROM at address 0 */
- soft_restart(0);
- } else {
- /* hardware reset, Use on-chip reset capability */
- sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
- }
-}
-
#endif /* __PLAT_SYSTEM_H */
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
new file mode 100644
index 00000000000..2b4e3d82957
--- /dev/null
+++ b/arch/arm/plat-spear/restart.c
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/plat-spear/restart.c
+ *
+ * SPEAr platform specific restart functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/io.h>
+#include <asm/hardware/sp810.h>
+#include <mach/hardware.h>
+#include <mach/generic.h>
+
+void spear_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* software reset, Jump into ROM at address 0 */
+ soft_restart(0);
+ } else {
+ /* hardware reset, Use on-chip reset capability */
+ sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+ }
+}
diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig
deleted file mode 100644
index 1bf499570f4..00000000000
--- a/arch/arm/plat-tcc/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-if ARCH_TCC_926
-
-menu "Telechips ARM926-based CPUs"
-
-choice
- prompt "Telechips CPU type:"
- default ARCH_TCC8K
-
-config ARCH_TCC8K
- bool TCC8000
- select USB_ARCH_HAS_OHCI
- help
- Support for Telechips TCC8000 systems
-
-endchoice
-
-source "arch/arm/mach-tcc8k/Kconfig"
-
-endmenu
-endif
diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile
deleted file mode 100644
index eceabc869b8..00000000000
--- a/arch/arm/plat-tcc/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# "Telechips Platform Common Modules"
-
-obj-y := clock.o system.o
diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c
deleted file mode 100644
index f3ced10d527..00000000000
--- a/arch/arm/plat-tcc/clock.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Clock framework for Telechips SoCs
- * Based on arch/arm/plat-mxc/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2010 Hans J. Koch, hjk@linutronix.de
- *
- * Licensed under the terms of the GPL v2.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
- BUG_ON(clk->refcount == 0);
-
- if (!(--clk->refcount) && clk->disable) {
- /* Unconditionally disable the clock in hardware */
- clk->disable(clk);
- /* recursively disable parents */
- if (clk->parent)
- __clk_disable(clk->parent);
- }
-}
-
-static int __clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk->refcount++ == 0 && clk->enable) {
- if (clk->parent)
- ret = __clk_enable(clk->parent);
- if (ret)
- return ret;
- else
- return clk->enable(clk);
- }
-
- return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (!clk)
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = __clk_enable(clk);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
- if (!clk)
- return;
-
- mutex_lock(&clocks_mutex);
- __clk_disable(clk);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (!clk)
- return 0UL;
-
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (!clk)
- return 0;
- if (!clk->round_rate)
- return 0;
-
- return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (!clk)
- return ret;
- if (!clk->set_rate || !rate)
- return ret;
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_rate(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- struct clk *old;
- int ret = -EINVAL;
-
- if (!clk)
- return ret;
- if (!clk->set_parent || !parent)
- return ret;
-
- mutex_lock(&clocks_mutex);
- old = clk->parent;
- if (clk->refcount)
- __clk_enable(parent);
- ret = clk->set_parent(clk, parent);
- if (ret)
- old = parent;
- if (clk->refcount)
- __clk_disable(old);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
- if (!clk)
- return NULL;
-
- return clk->parent;
-}
-EXPORT_SYMBOL_GPL(clk_get_parent);
diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h
deleted file mode 100644
index a12f58ad71a..00000000000
--- a/arch/arm/plat-tcc/include/mach/clock.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Low level clock header file for Telechips TCC architecture
- * (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the GPL v2.
- */
-
-#ifndef __ASM_ARCH_TCC_CLOCK_H__
-#define __ASM_ARCH_TCC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-
-struct clk {
- struct clk *parent;
- /* id number of a root clock, 0 for normal clocks */
- int root_id;
- /* Reference count of clock enable/disable */
- int refcount;
- /* Address of associated BCLKCTRx register. Must be set. */
- void __iomem *bclkctr;
- /* Bit position for BCLKCTRx. Must be set. */
- int bclk_shift;
- /* Address of ACLKxxx register, if any. */
- void __iomem *aclkreg;
- /* get the current clock rate (always a fresh value) */
- unsigned long (*get_rate) (struct clk *);
- /* Function ptr to set the clock to a new rate. The rate must match a
- supported rate returned from round_rate. Leave blank if clock is not
- programmable */
- int (*set_rate) (struct clk *, unsigned long);
- /* Function ptr to round the requested clock rate to the nearest
- supported rate that is less than or equal to the requested rate. */
- unsigned long (*round_rate) (struct clk *, unsigned long);
- /* Function ptr to enable the clock. Leave blank if clock can not
- be gated. */
- int (*enable) (struct clk *);
- /* Function ptr to disable the clock. Leave blank if clock can not
- be gated. */
- void (*disable) (struct clk *);
- /* Function ptr to set the parent clock of the clock. */
- int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
deleted file mode 100644
index cf17d04ec30..00000000000
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 1994-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
- .macro addruart, rp, rv, tmp
- moveq \rp, #0x90000000 @ physical base address
- movne \rv, #0xF1000000 @ virtual base
- orr \rp, \rp, #0x00007000 @ UART0
- orr \rv, \rv, #0x00007000 @ UART0
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #0x44]
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1001:
- ldr \rd, [\rx, #0x14]
- tst \rd, #0x20
-
- beq 1001b
- .endm
diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S
deleted file mode 100644
index 748f401e4b6..00000000000
--- a/arch/arm/plat-tcc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * include/asm-arm/arch-tcc83x/entry-macro.S
- *
- * Author : <linux@telechips.com>
- * Created: June 10, 2008
- * Description: Low-level IRQ helper macros for Telechips-based platforms
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \base, =0xF2003000 @ base address of PIC registers
-
- @@ read MREQ register of PIC0
-
- mov \irqnr, #0
- ldr \irqstat, [\base, #0x00000014 ] @ lower 32 interrupts
- cmp \irqstat, #0
- bne 1001f
-
- @@ read MREQ register of PIC1
-
- ldr \irqstat, [\base, #0x00000094] @ upper 32 interrupts
- cmp \irqstat, #0
- beq 1002f
- mov \irqnr, #0x20
-
-1001:
- movs \tmp, \irqstat, lsl #16
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #16
-
- movs \tmp, \irqstat, lsl #8
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #8
-
- movs \tmp, \irqstat, lsl #4
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #4
-
- movs \tmp, \irqstat, lsl #2
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #2
-
- movs \tmp, \irqstat, lsl #1
- addeq \irqnr, \irqnr, #1
- orrs \base, \base, #1
-1002:
- @@ exit here, Z flag unset if IRQ
-
- .endm
diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h
deleted file mode 100644
index e70d126ccaf..00000000000
--- a/arch/arm/plat-tcc/include/mach/hardware.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- * and Dirk Behme <dirk.behme@de.bosch.com>
- * Rewritten by: <linux@telechips.com>
- * Description: Hardware definitions for TCC8300 processors and boards
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- *
- * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Pulic License version 2.
- */
-
-#ifndef __ASM_ARCH_TCC_HARDWARE_H
-#define __ASM_ARCH_TCC_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#endif
-#include <mach/io.h>
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE 0xfffece00
-#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
-
-/* DPLL control registers */
-#define DPLL_CTL 0xfffecf00
-
-#endif /* __ASM_ARCH_TCC_HARDWARE_H */
diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h
deleted file mode 100644
index 3e911d3ea0f..00000000000
--- a/arch/arm/plat-tcc/include/mach/io.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * IO definitions for TCC8000 processors and boards
- *
- * Copyright (C) 1997-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Public License version 2.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h
deleted file mode 100644
index da863894d49..00000000000
--- a/arch/arm/plat-tcc/include/mach/irqs.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * IRQ definitions for TCC8xxx
- *
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_TCC_IRQS_H
-#define __ASM_ARCH_TCC_IRQS_H
-
-#define NR_IRQS 64
-
-/* PIC0 interrupts */
-#define INT_ADMA1 0
-#define INT_BDMA 1
-#define INT_ADMA0 2
-#define INT_GDMA1 3
-#define INT_I2S0RX 4
-#define INT_I2S0TX 5
-#define INT_TC 6
-#define INT_UART0 7
-#define INT_USBD 8
-#define INT_SPI0TX 9
-#define INT_UDMA 10
-#define INT_LIRQ 11
-#define INT_GDMA2 12
-#define INT_GDMA0 13
-#define INT_TC32 14
-#define INT_LCD 15
-#define INT_ADC 16
-#define INT_I2C 17
-#define INT_RTCP 18
-#define INT_RTCA 19
-#define INT_NFC 20
-#define INT_SD0 21
-#define INT_GSB0 22
-#define INT_PK 23
-#define INT_USBH0 24
-#define INT_USBH1 25
-#define INT_G2D 26
-#define INT_ECC 27
-#define INT_SPI0RX 28
-#define INT_UART1 29
-#define INT_MSCL 30
-#define INT_GSB1 31
-/* PIC1 interrupts */
-#define INT_E0 32
-#define INT_E1 33
-#define INT_E2 34
-#define INT_E3 35
-#define INT_E4 36
-#define INT_E5 37
-#define INT_E6 38
-#define INT_E7 39
-#define INT_UART2 40
-#define INT_UART3 41
-#define INT_SPI1TX 42
-#define INT_SPI1RX 43
-#define INT_GSB2 44
-#define INT_SPDIF 45
-#define INT_CDIF 46
-#define INT_VBON 47
-#define INT_VBOFF 48
-#define INT_SD1 49
-#define INT_UART4 50
-#define INT_GDMA3 51
-#define INT_I2S1RX 52
-#define INT_I2S1TX 53
-#define INT_CAN0 54
-#define INT_CAN1 55
-#define INT_GSB3 56
-#define INT_KRST 57
-#define INT_UNUSED 58
-#define INT_SD0D3 59
-#define INT_SD1D3 60
-#define INT_GPS0 61
-#define INT_GPS1 62
-#define INT_GPS2 63
-
-#endif /* ASM_ARCH_TCC_IRQS_H */
diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h
deleted file mode 100644
index 909e6035d84..00000000000
--- a/arch/arm/plat-tcc/include/mach/system.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- * Description: LINUX SYSTEM FUNCTIONS for TCC83x
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-extern void plat_tcc_reboot(void);
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- plat_tcc_reboot();
-}
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
deleted file mode 100644
index 1d942829533..00000000000
--- a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * Telechips TCC8000 register definitions
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPLv2.
- */
-
-#ifndef TCC8K_REGS_H
-#define TCC8K_REGS_H
-
-#include <linux/types.h>
-
-#define EXT_SDRAM_BASE 0x20000000
-#define INT_SRAM_BASE 0x30000000
-#define INT_SRAM_SIZE SZ_32K
-#define CS0_BASE 0x40000000
-#define CS1_BASE 0x50000000
-#define CS1_SIZE SZ_64K
-#define CS2_BASE 0x60000000
-#define CS3_BASE 0x70000000
-#define AHB_PERI_BASE 0x80000000
-#define AHB_PERI_SIZE SZ_64K
-#define APB0_PERI_BASE 0x90000000
-#define APB0_PERI_SIZE SZ_128K
-#define APB1_PERI_BASE 0x98000000
-#define APB1_PERI_SIZE SZ_128K
-#define DATA_TCM_BASE 0xa0000000
-#define DATA_TCM_SIZE SZ_8K
-#define EXT_MEM_CTRL_BASE 0xf0000000
-#define EXT_MEM_CTRL_SIZE SZ_4K
-
-#define CS1_BASE_VIRT (void __iomem *)0xf7000000
-#define AHB_PERI_BASE_VIRT (void __iomem *)0xf4000000
-#define APB0_PERI_BASE_VIRT (void __iomem *)0xf1000000
-#define APB1_PERI_BASE_VIRT (void __iomem *)0xf2000000
-#define EXT_MEM_CTRL_BASE_VIRT (void __iomem *)0xf3000000
-#define INT_SRAM_BASE_VIRT (void __iomem *)0xf5000000
-#define DATA_TCM_BASE_VIRT (void __iomem *)0xf6000000
-
-#define __REG(x) (*((volatile u32 *)(x)))
-
-/* USB Device Controller Registers */
-#define UDC_BASE (AHB_PERI_BASE_VIRT + 0x8000)
-#define UDC_BASE_PHYS (AHB_PERI_BASE + 0x8000)
-
-#define UDC_IR_OFFS 0x00
-#define UDC_EIR_OFFS 0x04
-#define UDC_EIER_OFFS 0x08
-#define UDC_FAR_OFFS 0x0c
-#define UDC_FNR_OFFS 0x10
-#define UDC_EDR_OFFS 0x14
-#define UDC_RT_OFFS 0x18
-#define UDC_SSR_OFFS 0x1c
-#define UDC_SCR_OFFS 0x20
-#define UDC_EP0SR_OFFS 0x24
-#define UDC_EP0CR_OFFS 0x28
-
-#define UDC_ESR_OFFS 0x2c
-#define UDC_ECR_OFFS 0x30
-#define UDC_BRCR_OFFS 0x34
-#define UDC_BWCR_OFFS 0x38
-#define UDC_MPR_OFFS 0x3c
-#define UDC_DCR_OFFS 0x40
-#define UDC_DTCR_OFFS 0x44
-#define UDC_DFCR_OFFS 0x48
-#define UDC_DTTCR1_OFFS 0x4c
-#define UDC_DTTCR2_OFFS 0x50
-#define UDC_ESR2_OFFS 0x54
-
-#define UDC_SCR2_OFFS 0x58
-#define UDC_EP0BUF_OFFS 0x60
-#define UDC_EP1BUF_OFFS 0x64
-#define UDC_EP2BUF_OFFS 0x68
-#define UDC_EP3BUF_OFFS 0x6c
-#define UDC_PLICR_OFFS 0xa0
-#define UDC_PCR_OFFS 0xa4
-
-#define UDC_UPCR0_OFFS 0xc8
-#define UDC_UPCR1_OFFS 0xcc
-#define UDC_UPCR2_OFFS 0xd0
-#define UDC_UPCR3_OFFS 0xd4
-
-/* Bits in UDC_EIR */
-#define UDC_EIR_EP0I (1 << 0)
-#define UDC_EIR_EP1I (1 << 1)
-#define UDC_EIR_EP2I (1 << 2)
-#define UDC_EIR_EP3I (1 << 3)
-#define UDC_EIR_EPI_MASK 0x0f
-
-/* Bits in UDC_EIER */
-#define UDC_EIER_EP0IE (1 << 0)
-#define UDC_EIER_EP1IE (1 << 1)
-#define UDC_EIER_EP2IE (1 << 2)
-#define UDC_EIER_EP3IE (1 << 3)
-
-/* Bits in UDC_FNR */
-#define UDC_FNR_FN_MASK 0x7ff
-#define UDC_FNR_SM (1 << 13)
-#define UDC_FNR_FTL (1 << 14)
-
-/* Bits in UDC_SSR */
-#define UDC_SSR_HFRES (1 << 0)
-#define UDC_SSR_HFSUSP (1 << 1)
-#define UDC_SSR_HFRM (1 << 2)
-#define UDC_SSR_SDE (1 << 3)
-#define UDC_SSR_HSP (1 << 4)
-#define UDC_SSR_DM (1 << 5)
-#define UDC_SSR_DP (1 << 6)
-#define UDC_SSR_TBM (1 << 7)
-#define UDC_SSR_VBON (1 << 8)
-#define UDC_SSR_VBOFF (1 << 9)
-#define UDC_SSR_EOERR (1 << 10)
-#define UDC_SSR_DCERR (1 << 11)
-#define UDC_SSR_TCERR (1 << 12)
-#define UDC_SSR_BSERR (1 << 13)
-#define UDC_SSR_TMERR (1 << 14)
-#define UDC_SSR_BAERR (1 << 15)
-
-/* Bits in UDC_SCR */
-#define UDC_SCR_HRESE (1 << 0)
-#define UDC_SCR_HSSPE (1 << 1)
-#define UDC_SCR_RRDE (1 << 5)
-#define UDC_SCR_SPDEN (1 << 6)
-#define UDC_SCR_DIEN (1 << 12)
-
-/* Bits in UDC_EP0SR */
-#define UDC_EP0SR_RSR (1 << 0)
-#define UDC_EP0SR_TST (1 << 1)
-#define UDC_EP0SR_SHT (1 << 4)
-#define UDC_EP0SR_LWO (1 << 6)
-
-/* Bits in UDC_EP0CR */
-#define UDC_EP0CR_ESS (1 << 1)
-
-/* Bits in UDC_ESR */
-#define UDC_ESR_RPS (1 << 0)
-#define UDC_ESR_TPS (1 << 1)
-#define UDC_ESR_LWO (1 << 4)
-#define UDC_ESR_FFS (1 << 6)
-
-/* Bits in UDC_ECR */
-#define UDC_ECR_ESS (1 << 1)
-#define UDC_ECR_CDP (1 << 2)
-
-#define UDC_ECR_FLUSH (1 << 6)
-#define UDC_ECR_DUEN (1 << 7)
-
-/* Bits in UDC_UPCR0 */
-#define UDC_UPCR0_VBD (1 << 1)
-#define UDC_UPCR0_VBDS (1 << 6)
-#define UDC_UPCR0_RCD_12 (0x0 << 9)
-#define UDC_UPCR0_RCD_24 (0x1 << 9)
-#define UDC_UPCR0_RCD_48 (0x2 << 9)
-#define UDC_UPCR0_RCS_EXT (0x1 << 11)
-#define UDC_UPCR0_RCS_XTAL (0x0 << 11)
-
-/* Bits in UDC_UPCR1 */
-#define UDC_UPCR1_CDT(x) ((x) << 0)
-#define UDC_UPCR1_OTGT(x) ((x) << 3)
-#define UDC_UPCR1_SQRXT(x) ((x) << 8)
-#define UDC_UPCR1_TXFSLST(x) ((x) << 12)
-
-/* Bits in UDC_UPCR2 */
-#define UDC_UPCR2_TP (1 << 0)
-#define UDC_UPCR2_TXRT(x) ((x) << 2)
-#define UDC_UPCR2_TXVRT(x) ((x) << 5)
-#define UDC_UPCR2_OPMODE(x) ((x) << 9)
-#define UDC_UPCR2_XCVRSEL(x) ((x) << 12)
-#define UDC_UPCR2_TM (1 << 14)
-
-/* USB Host Controller registers */
-#define USBH0_BASE (AHB_PERI_BASE_VIRT + 0xb000)
-#define USBH1_BASE (AHB_PERI_BASE_VIRT + 0xb800)
-
-#define OHCI_INT_ENABLE_OFFS 0x10
-
-#define RH_DESCRIPTOR_A_OFFS 0x48
-#define RH_DESCRIPTOR_B_OFFS 0x4c
-
-#define USBHTCFG0_OFFS 0x100
-#define USBHHCFG0_OFFS 0x104
-#define USBHHCFG1_OFFS 0x104
-
-/* DMA controller registers */
-#define DMAC0_BASE (AHB_PERI_BASE + 0x4000)
-#define DMAC1_BASE (AHB_PERI_BASE + 0xa000)
-#define DMAC2_BASE (AHB_PERI_BASE + 0x4800)
-#define DMAC3_BASE (AHB_PERI_BASE + 0xa800)
-
-#define DMAC_CH_OFFSET(ch) (ch * 0x30)
-
-#define ST_SADR_OFFS 0x00
-#define SPARAM_OFFS 0x04
-#define C_SADR_OFFS 0x0c
-#define ST_DADR_OFFS 0x10
-#define DPARAM_OFFS 0x14
-#define C_DADR_OFFS 0x1c
-#define HCOUNT_OFFS 0x20
-#define CHCTRL_OFFS 0x24
-#define RPTCTRL_OFFS 0x28
-#define EXTREQ_A_OFFS 0x2c
-
-/* Bits in CHCTRL register */
-#define CHCTRL_EN (1 << 0)
-
-#define CHCTRL_IEN (1 << 2)
-#define CHCTRL_FLAG (1 << 3)
-#define CHCTRL_WSIZE8 (0 << 4)
-#define CHCTRL_WSIZE16 (1 << 4)
-#define CHCTRL_WSIZE32 (2 << 4)
-
-#define CHCTRL_BSIZE1 (0 << 6)
-#define CHCTRL_BSIZE2 (1 << 6)
-#define CHCTRL_BSIZE4 (2 << 6)
-#define CHCTRL_BSIZE8 (3 << 6)
-
-#define CHCTRL_TYPE_SINGLE_E (0 << 8)
-#define CHCTRL_TYPE_HW (1 << 8)
-#define CHCTRL_TYPE_SW (2 << 8)
-#define CHCTRL_TYPE_SINGLE_L (3 << 8)
-
-#define CHCTRL_BST (1 << 10)
-
-/* Use DMA controller 0, channel 2 for USB */
-#define USB_DMA_BASE (DMAC0_BASE + DMAC_CH_OFFSET(2))
-
-/* NAND flash controller registers */
-#define NFC_BASE (AHB_PERI_BASE_VIRT + 0xd000)
-#define NFC_BASE_PHYS (AHB_PERI_BASE + 0xd000)
-
-#define NFC_CMD_OFFS 0x00
-#define NFC_LADDR_OFFS 0x04
-#define NFC_BADDR_OFFS 0x08
-#define NFC_SADDR_OFFS 0x0c
-#define NFC_WDATA_OFFS 0x10
-#define NFC_LDATA_OFFS 0x20
-#define NFC_SDATA_OFFS 0x40
-#define NFC_CTRL_OFFS 0x50
-#define NFC_PSTART_OFFS 0x54
-#define NFC_RSTART_OFFS 0x58
-#define NFC_DSIZE_OFFS 0x5c
-#define NFC_IREQ_OFFS 0x60
-#define NFC_RST_OFFS 0x64
-#define NFC_CTRL1_OFFS 0x68
-#define NFC_MDATA_OFFS 0x70
-
-#define NFC_WDATA_PHYS_ADDR (NFC_BASE_PHYS + NFC_WDATA_OFFS)
-
-/* Bits in NFC_CTRL */
-#define NFC_CTRL_BHLD_MASK (0xf << 0)
-#define NFC_CTRL_BPW_MASK (0xf << 4)
-#define NFC_CTRL_BSTP_MASK (0xf << 8)
-#define NFC_CTRL_CADDR_MASK (0x7 << 12)
-#define NFC_CTRL_CADDR_1 (0x0 << 12)
-#define NFC_CTRL_CADDR_2 (0x1 << 12)
-#define NFC_CTRL_CADDR_3 (0x2 << 12)
-#define NFC_CTRL_CADDR_4 (0x3 << 12)
-#define NFC_CTRL_CADDR_5 (0x4 << 12)
-#define NFC_CTRL_MSK (1 << 15)
-#define NFC_CTRL_PSIZE256 (0 << 16)
-#define NFC_CTRL_PSIZE512 (1 << 16)
-#define NFC_CTRL_PSIZE1024 (2 << 16)
-#define NFC_CTRL_PSIZE2048 (3 << 16)
-#define NFC_CTRL_PSIZE4096 (4 << 16)
-#define NFC_CTRL_PSIZE_MASK (7 << 16)
-#define NFC_CTRL_BSIZE1 (0 << 19)
-#define NFC_CTRL_BSIZE2 (1 << 19)
-#define NFC_CTRL_BSIZE4 (2 << 19)
-#define NFC_CTRL_BSIZE8 (3 << 19)
-#define NFC_CTRL_BSIZE_MASK (3 << 19)
-#define NFC_CTRL_RDY (1 << 21)
-#define NFC_CTRL_CS0SEL (1 << 22)
-#define NFC_CTRL_CS1SEL (1 << 23)
-#define NFC_CTRL_CS2SEL (1 << 24)
-#define NFC_CTRL_CS3SEL (1 << 25)
-#define NFC_CTRL_CSMASK (0xf << 22)
-#define NFC_CTRL_BW (1 << 26)
-#define NFC_CTRL_FS (1 << 27)
-#define NFC_CTRL_DEN (1 << 28)
-#define NFC_CTRL_READ_IEN (1 << 29)
-#define NFC_CTRL_PROG_IEN (1 << 30)
-#define NFC_CTRL_RDY_IEN (1 << 31)
-
-/* Bits in NFC_IREQ */
-#define NFC_IREQ_IRQ0 (1 << 0)
-#define NFC_IREQ_IRQ1 (1 << 1)
-#define NFC_IREQ_IRQ2 (1 << 2)
-
-#define NFC_IREQ_FLAG0 (1 << 4)
-#define NFC_IREQ_FLAG1 (1 << 5)
-#define NFC_IREQ_FLAG2 (1 << 6)
-
-/* MMC controller registers */
-#define MMC0_BASE (AHB_PERI_BASE_VIRT + 0xe000)
-#define MMC1_BASE (AHB_PERI_BASE_VIRT + 0xe800)
-
-/* UART base addresses */
-
-#define UART0_BASE (APB0_PERI_BASE_VIRT + 0x07000)
-#define UART0_BASE_PHYS (APB0_PERI_BASE + 0x07000)
-#define UART1_BASE (APB0_PERI_BASE_VIRT + 0x08000)
-#define UART1_BASE_PHYS (APB0_PERI_BASE + 0x08000)
-#define UART2_BASE (APB0_PERI_BASE_VIRT + 0x09000)
-#define UART2_BASE_PHYS (APB0_PERI_BASE + 0x09000)
-#define UART3_BASE (APB0_PERI_BASE_VIRT + 0x0a000)
-#define UART3_BASE_PHYS (APB0_PERI_BASE + 0x0a000)
-#define UART4_BASE (APB0_PERI_BASE_VIRT + 0x15000)
-#define UART4_BASE_PHYS (APB0_PERI_BASE + 0x15000)
-
-#define UART_BASE UART0_BASE
-#define UART_BASE_PHYS UART0_BASE_PHYS
-
-/* ECC controller */
-#define ECC_CTR_BASE (APB0_PERI_BASE_VIRT + 0xd000)
-
-#define ECC_CTRL_OFFS 0x00
-#define ECC_BASE_OFFS 0x04
-#define ECC_MASK_OFFS 0x08
-#define ECC_CLEAR_OFFS 0x0c
-#define ECC4_0_OFFS 0x10
-#define ECC4_1_OFFS 0x14
-
-#define ECC_EADDR0_OFFS 0x50
-
-#define ECC_ERRNUM_OFFS 0x90
-#define ECC_IREQ_OFFS 0x94
-
-/* Bits in ECC_CTRL */
-#define ECC_CTRL_ECC4_DIEN (1 << 28)
-#define ECC_CTRL_ECC8_DIEN (1 << 29)
-#define ECC_CTRL_ECC12_DIEN (1 << 30)
-#define ECC_CTRL_ECC_DISABLE 0x0
-#define ECC_CTRL_ECC_SLC_ENC 0x8
-#define ECC_CTRL_ECC_SLC_DEC 0x9
-#define ECC_CTRL_ECC4_ENC 0xa
-#define ECC_CTRL_ECC4_DEC 0xb
-#define ECC_CTRL_ECC8_ENC 0xc
-#define ECC_CTRL_ECC8_DEC 0xd
-#define ECC_CTRL_ECC12_ENC 0xe
-#define ECC_CTRL_ECC12_DEC 0xf
-
-/* Bits in ECC_IREQ */
-#define ECC_IREQ_E4DI (1 << 4)
-
-#define ECC_IREQ_E4DF (1 << 20)
-#define ECC_IREQ_E4EF (1 << 21)
-
-/* Interrupt controller */
-
-#define PIC0_BASE (APB1_PERI_BASE_VIRT + 0x3000)
-#define PIC0_BASE_PHYS (APB1_PERI_BASE + 0x3000)
-
-#define PIC0_IEN_OFFS 0x00
-#define PIC0_CREQ_OFFS 0x04
-#define PIC0_IREQ_OFFS 0x08
-#define PIC0_IRQSEL_OFFS 0x0c
-#define PIC0_SRC_OFFS 0x10
-#define PIC0_MREQ_OFFS 0x14
-#define PIC0_TSTREQ_OFFS 0x18
-#define PIC0_POL_OFFS 0x1c
-#define PIC0_IRQ_OFFS 0x20
-#define PIC0_FIQ_OFFS 0x24
-#define PIC0_MIRQ_OFFS 0x28
-#define PIC0_MFIQ_OFFS 0x2c
-#define PIC0_TMODE_OFFS 0x30
-#define PIC0_SYNC_OFFS 0x34
-#define PIC0_WKUP_OFFS 0x38
-#define PIC0_TMODEA_OFFS 0x3c
-#define PIC0_INTOEN_OFFS 0x40
-#define PIC0_MEN0_OFFS 0x44
-#define PIC0_MEN_OFFS 0x48
-
-#define PIC0_IEN __REG(PIC0_BASE + PIC0_IEN_OFFS)
-#define PIC0_IEN_PHYS __REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS)
-#define PIC0_CREQ __REG(PIC0_BASE + PIC0_CREQ_OFFS)
-#define PIC0_CREQ_PHYS __REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS)
-#define PIC0_IREQ __REG(PIC0_BASE + PIC0_IREQ_OFFS)
-#define PIC0_IRQSEL __REG(PIC0_BASE + PIC0_IRQSEL_OFFS)
-#define PIC0_IRQSEL_PHYS __REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS)
-#define PIC0_SRC __REG(PIC0_BASE + PIC0_SRC_OFFS)
-#define PIC0_MREQ __REG(PIC0_BASE + PIC0_MREQ_OFFS)
-#define PIC0_TSTREQ __REG(PIC0_BASE + PIC0_TSTREQ_OFFS)
-#define PIC0_POL __REG(PIC0_BASE + PIC0_POL_OFFS)
-#define PIC0_IRQ __REG(PIC0_BASE + PIC0_IRQ_OFFS)
-#define PIC0_FIQ __REG(PIC0_BASE + PIC0_FIQ_OFFS)
-#define PIC0_MIRQ __REG(PIC0_BASE + PIC0_MIRQ_OFFS)
-#define PIC0_MFIQ __REG(PIC0_BASE + PIC0_MFIQ_OFFS)
-#define PIC0_TMODE __REG(PIC0_BASE + PIC0_TMODE_OFFS)
-#define PIC0_TMODE_PHYS __REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS)
-#define PIC0_SYNC __REG(PIC0_BASE + PIC0_SYNC_OFFS)
-#define PIC0_WKUP __REG(PIC0_BASE + PIC0_WKUP_OFFS)
-#define PIC0_TMODEA __REG(PIC0_BASE + PIC0_TMODEA_OFFS)
-#define PIC0_INTOEN __REG(PIC0_BASE + PIC0_INTOEN_OFFS)
-#define PIC0_MEN0 __REG(PIC0_BASE + PIC0_MEN0_OFFS)
-#define PIC0_MEN __REG(PIC0_BASE + PIC0_MEN_OFFS)
-
-#define PIC1_BASE (APB1_PERI_BASE_VIRT + 0x3080)
-
-#define PIC1_IEN_OFFS 0x00
-#define PIC1_CREQ_OFFS 0x04
-#define PIC1_IREQ_OFFS 0x08
-#define PIC1_IRQSEL_OFFS 0x0c
-#define PIC1_SRC_OFFS 0x10
-#define PIC1_MREQ_OFFS 0x14
-#define PIC1_TSTREQ_OFFS 0x18
-#define PIC1_POL_OFFS 0x1c
-#define PIC1_IRQ_OFFS 0x20
-#define PIC1_FIQ_OFFS 0x24
-#define PIC1_MIRQ_OFFS 0x28
-#define PIC1_MFIQ_OFFS 0x2c
-#define PIC1_TMODE_OFFS 0x30
-#define PIC1_SYNC_OFFS 0x34
-#define PIC1_WKUP_OFFS 0x38
-#define PIC1_TMODEA_OFFS 0x3c
-#define PIC1_INTOEN_OFFS 0x40
-#define PIC1_MEN1_OFFS 0x44
-#define PIC1_MEN_OFFS 0x48
-
-#define PIC1_IEN __REG(PIC1_BASE + PIC1_IEN_OFFS)
-#define PIC1_CREQ __REG(PIC1_BASE + PIC1_CREQ_OFFS)
-#define PIC1_IREQ __REG(PIC1_BASE + PIC1_IREQ_OFFS)
-#define PIC1_IRQSEL __REG(PIC1_BASE + PIC1_IRQSEL_OFFS)
-#define PIC1_SRC __REG(PIC1_BASE + PIC1_SRC_OFFS)
-#define PIC1_MREQ __REG(PIC1_BASE + PIC1_MREQ_OFFS)
-#define PIC1_TSTREQ __REG(PIC1_BASE + PIC1_TSTREQ_OFFS)
-#define PIC1_POL __REG(PIC1_BASE + PIC1_POL_OFFS)
-#define PIC1_IRQ __REG(PIC1_BASE + PIC1_IRQ_OFFS)
-#define PIC1_FIQ __REG(PIC1_BASE + PIC1_FIQ_OFFS)
-#define PIC1_MIRQ __REG(PIC1_BASE + PIC1_MIRQ_OFFS)
-#define PIC1_MFIQ __REG(PIC1_BASE + PIC1_MFIQ_OFFS)
-#define PIC1_TMODE __REG(PIC1_BASE + PIC1_TMODE_OFFS)
-#define PIC1_SYNC __REG(PIC1_BASE + PIC1_SYNC_OFFS)
-#define PIC1_WKUP __REG(PIC1_BASE + PIC1_WKUP_OFFS)
-#define PIC1_TMODEA __REG(PIC1_BASE + PIC1_TMODEA_OFFS)
-#define PIC1_INTOEN __REG(PIC1_BASE + PIC1_INTOEN_OFFS)
-#define PIC1_MEN1 __REG(PIC1_BASE + PIC1_MEN1_OFFS)
-#define PIC1_MEN __REG(PIC1_BASE + PIC1_MEN_OFFS)
-
-/* Timer registers */
-#define TIMER_BASE (APB1_PERI_BASE_VIRT + 0x4000)
-#define TIMER_BASE_PHYS (APB1_PERI_BASE + 0x4000)
-
-#define TWDCFG_OFFS 0x70
-
-#define TC32EN_OFFS 0x80
-#define TC32LDV_OFFS 0x84
-#define TC32CMP0_OFFS 0x88
-#define TC32CMP1_OFFS 0x8c
-#define TC32PCNT_OFFS 0x90
-#define TC32MCNT_OFFS 0x94
-#define TC32IRQ_OFFS 0x98
-
-/* Bits in TC32EN */
-#define TC32EN_PRESCALE_MASK 0x00ffffff
-#define TC32EN_ENABLE (1 << 24)
-#define TC32EN_LOADZERO (1 << 25)
-#define TC32EN_STOPMODE (1 << 26)
-#define TC32EN_LDM0 (1 << 28)
-#define TC32EN_LDM1 (1 << 29)
-
-/* Bits in TC32IRQ */
-#define TC32IRQ_MSTAT_MASK 0x0000001f
-#define TC32IRQ_RSTAT_MASK (0x1f << 8)
-#define TC32IRQ_IRQEN0 (1 << 16)
-#define TC32IRQ_IRQEN1 (1 << 17)
-#define TC32IRQ_IRQEN2 (1 << 18)
-#define TC32IRQ_IRQEN3 (1 << 19)
-#define TC32IRQ_IRQEN4 (1 << 20)
-#define TC32IRQ_RSYNC (1 << 30)
-#define TC32IRQ_IRQCLR (1 << 31)
-
-/* GPIO registers */
-#define GPIOPD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPD_DAT_OFFS 0x00
-#define GPIOPD_DOE_OFFS 0x04
-#define GPIOPD_FS0_OFFS 0x08
-#define GPIOPD_FS1_OFFS 0x0c
-#define GPIOPD_FS2_OFFS 0x10
-#define GPIOPD_RPU_OFFS 0x30
-#define GPIOPD_RPD_OFFS 0x34
-#define GPIOPD_DV0_OFFS 0x38
-#define GPIOPD_DV1_OFFS 0x3c
-
-#define GPIOPS_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPS_DAT_OFFS 0x40
-#define GPIOPS_DOE_OFFS 0x44
-#define GPIOPS_FS0_OFFS 0x48
-#define GPIOPS_FS1_OFFS 0x4c
-#define GPIOPS_FS2_OFFS 0x50
-#define GPIOPS_FS3_OFFS 0x54
-#define GPIOPS_RPU_OFFS 0x70
-#define GPIOPS_RPD_OFFS 0x74
-#define GPIOPS_DV0_OFFS 0x78
-#define GPIOPS_DV1_OFFS 0x7c
-
-#define GPIOPS_FS1_SDH0_BITS 0x000000ff
-#define GPIOPS_FS1_SDH1_BITS 0x0000ff00
-
-#define GPIOPU_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPU_DAT_OFFS 0x80
-#define GPIOPU_DOE_OFFS 0x84
-#define GPIOPU_FS0_OFFS 0x88
-#define GPIOPU_FS1_OFFS 0x8c
-#define GPIOPU_FS2_OFFS 0x90
-#define GPIOPU_RPU_OFFS 0xb0
-#define GPIOPU_RPD_OFFS 0xb4
-#define GPIOPU_DV0_OFFS 0xb8
-#define GPIOPU_DV1_OFFS 0xbc
-
-#define GPIOPU_FS0_TXD0 (1 << 0)
-#define GPIOPU_FS0_RXD0 (1 << 1)
-#define GPIOPU_FS0_CTS0 (1 << 2)
-#define GPIOPU_FS0_RTS0 (1 << 3)
-#define GPIOPU_FS0_TXD1 (1 << 4)
-#define GPIOPU_FS0_RXD1 (1 << 5)
-#define GPIOPU_FS0_CTS1 (1 << 6)
-#define GPIOPU_FS0_RTS1 (1 << 7)
-#define GPIOPU_FS0_TXD2 (1 << 8)
-#define GPIOPU_FS0_RXD2 (1 << 9)
-#define GPIOPU_FS0_CTS2 (1 << 10)
-#define GPIOPU_FS0_RTS2 (1 << 11)
-#define GPIOPU_FS0_TXD3 (1 << 12)
-#define GPIOPU_FS0_RXD3 (1 << 13)
-#define GPIOPU_FS0_CTS3 (1 << 14)
-#define GPIOPU_FS0_RTS3 (1 << 15)
-#define GPIOPU_FS0_TXD4 (1 << 16)
-#define GPIOPU_FS0_RXD4 (1 << 17)
-#define GPIOPU_FS0_CTS4 (1 << 18)
-#define GPIOPU_FS0_RTS4 (1 << 19)
-
-#define GPIOFC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFC_DAT_OFFS 0xc0
-#define GPIOFC_DOE_OFFS 0xc4
-#define GPIOFC_FS0_OFFS 0xc8
-#define GPIOFC_FS1_OFFS 0xcc
-#define GPIOFC_FS2_OFFS 0xd0
-#define GPIOFC_FS3_OFFS 0xd4
-#define GPIOFC_RPU_OFFS 0xf0
-#define GPIOFC_RPD_OFFS 0xf4
-#define GPIOFC_DV0_OFFS 0xf8
-#define GPIOFC_DV1_OFFS 0xfc
-
-#define GPIOFD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFD_DAT_OFFS 0x100
-#define GPIOFD_DOE_OFFS 0x104
-#define GPIOFD_FS0_OFFS 0x108
-#define GPIOFD_FS1_OFFS 0x10c
-#define GPIOFD_FS2_OFFS 0x110
-#define GPIOFD_RPU_OFFS 0x130
-#define GPIOFD_RPD_OFFS 0x134
-#define GPIOFD_DV0_OFFS 0x138
-#define GPIOFD_DV1_OFFS 0x13c
-
-#define GPIOLC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLC_DAT_OFFS 0x140
-#define GPIOLC_DOE_OFFS 0x144
-#define GPIOLC_FS0_OFFS 0x148
-#define GPIOLC_FS1_OFFS 0x14c
-#define GPIOLC_RPU_OFFS 0x170
-#define GPIOLC_RPD_OFFS 0x174
-#define GPIOLC_DV0_OFFS 0x178
-#define GPIOLC_DV1_OFFS 0x17c
-
-#define GPIOLD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLD_DAT_OFFS 0x180
-#define GPIOLD_DOE_OFFS 0x184
-#define GPIOLD_FS0_OFFS 0x188
-#define GPIOLD_FS1_OFFS 0x18c
-#define GPIOLD_FS2_OFFS 0x190
-#define GPIOLD_RPU_OFFS 0x1b0
-#define GPIOLD_RPD_OFFS 0x1b4
-#define GPIOLD_DV0_OFFS 0x1b8
-#define GPIOLD_DV1_OFFS 0x1bc
-
-#define GPIOAD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOAD_DAT_OFFS 0x1c0
-#define GPIOAD_DOE_OFFS 0x1c4
-#define GPIOAD_FS0_OFFS 0x1c8
-#define GPIOAD_RPU_OFFS 0x1f0
-#define GPIOAD_RPD_OFFS 0x1f4
-#define GPIOAD_DV0_OFFS 0x1f8
-#define GPIOAD_DV1_OFFS 0x1fc
-
-#define GPIOXC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXC_DAT_OFFS 0x200
-#define GPIOXC_DOE_OFFS 0x204
-#define GPIOXC_FS0_OFFS 0x208
-#define GPIOXC_RPU_OFFS 0x230
-#define GPIOXC_RPD_OFFS 0x234
-#define GPIOXC_DV0_OFFS 0x238
-#define GPIOXC_DV1_OFFS 0x23c
-
-#define GPIOXC_FS0 __REG(GPIOXC_BASE + GPIOXC_FS0_OFFS)
-
-#define GPIOXC_FS0_CS0 (1 << 26)
-#define GPIOXC_FS0_CS1 (1 << 27)
-
-#define GPIOXD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXD_DAT_OFFS 0x240
-#define GPIOXD_FS0_OFFS 0x248
-#define GPIOXD_RPU_OFFS 0x270
-#define GPIOXD_RPD_OFFS 0x274
-#define GPIOXD_DV0_OFFS 0x278
-#define GPIOXD_DV1_OFFS 0x27c
-
-#define GPIOPK_BASE (APB1_PERI_BASE_VIRT + 0x1c000)
-
-#define GPIOPK_RST_OFFS 0x008
-#define GPIOPK_DAT_OFFS 0x100
-#define GPIOPK_DOE_OFFS 0x104
-#define GPIOPK_FS0_OFFS 0x108
-#define GPIOPK_FS1_OFFS 0x10c
-#define GPIOPK_FS2_OFFS 0x110
-#define GPIOPK_IRQST_OFFS 0x210
-#define GPIOPK_IRQEN_OFFS 0x214
-#define GPIOPK_IRQPOL_OFFS 0x218
-#define GPIOPK_IRQTM0_OFFS 0x21c
-#define GPIOPK_IRQTM1_OFFS 0x220
-#define GPIOPK_CTL_OFFS 0x22c
-
-#define PMGPIO_BASE (APB1_PERI_BASE_VIRT + 0x10000)
-#define BACKUP_RAM_BASE PMGPIO_BASE
-
-#define PMGPIO_DAT_OFFS 0x800
-#define PMGPIO_DOE_OFFS 0x804
-#define PMGPIO_FS0_OFFS 0x808
-#define PMGPIO_RPU_OFFS 0x810
-#define PMGPIO_RPD_OFFS 0x814
-#define PMGPIO_DV0_OFFS 0x818
-#define PMGPIO_DV1_OFFS 0x81c
-#define PMGPIO_EE0_OFFS 0x820
-#define PMGPIO_EE1_OFFS 0x824
-#define PMGPIO_CTL_OFFS 0x828
-#define PMGPIO_DI_OFFS 0x82c
-#define PMGPIO_STR_OFFS 0x830
-#define PMGPIO_STF_OFFS 0x834
-#define PMGPIO_POL_OFFS 0x838
-#define PMGPIO_APB_OFFS 0x800
-
-/* Clock controller registers */
-#define CKC_BASE ((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000))
-
-#define CLKCTRL_OFFS 0x00
-#define PLL0CFG_OFFS 0x04
-#define PLL1CFG_OFFS 0x08
-#define CLKDIVC0_OFFS 0x0c
-
-#define BCLKCTR0_OFFS 0x14
-#define SWRESET0_OFFS 0x18
-
-#define BCLKCTR1_OFFS 0x60
-#define SWRESET1_OFFS 0x64
-#define PWDCTL_OFFS 0x68
-#define PLL2CFG_OFFS 0x6c
-#define CLKDIVC1_OFFS 0x70
-
-#define ACLKREF_OFFS 0x80
-#define ACLKI2C_OFFS 0x84
-#define ACLKSPI0_OFFS 0x88
-#define ACLKSPI1_OFFS 0x8c
-#define ACLKUART0_OFFS 0x90
-#define ACLKUART1_OFFS 0x94
-#define ACLKUART2_OFFS 0x98
-#define ACLKUART3_OFFS 0x9c
-#define ACLKUART4_OFFS 0xa0
-#define ACLKTCT_OFFS 0xa4
-#define ACLKTCX_OFFS 0xa8
-#define ACLKTCZ_OFFS 0xac
-#define ACLKADC_OFFS 0xb0
-#define ACLKDAI0_OFFS 0xb4
-#define ACLKDAI1_OFFS 0xb8
-#define ACLKLCD_OFFS 0xbc
-#define ACLKSPDIF_OFFS 0xc0
-#define ACLKUSBH_OFFS 0xc4
-#define ACLKSDH0_OFFS 0xc8
-#define ACLKSDH1_OFFS 0xcc
-#define ACLKC3DEC_OFFS 0xd0
-#define ACLKEXT_OFFS 0xd4
-#define ACLKCAN0_OFFS 0xd8
-#define ACLKCAN1_OFFS 0xdc
-#define ACLKGSB0_OFFS 0xe0
-#define ACLKGSB1_OFFS 0xe4
-#define ACLKGSB2_OFFS 0xe8
-#define ACLKGSB3_OFFS 0xec
-
-#define PLLxCFG_PD (1 << 31)
-
-/* CLKCTRL bits */
-#define CLKCTRL_XE (1 << 31)
-
-/* CLKDIVCx bits */
-#define CLKDIVC0_XTE (1 << 7)
-#define CLKDIVC0_XE (1 << 15)
-#define CLKDIVC0_P1E (1 << 23)
-#define CLKDIVC0_P0E (1 << 31)
-
-#define CLKDIVC1_P2E (1 << 7)
-
-/* BCLKCTR0 clock bits */
-#define BCLKCTR0_USBD (1 << 4)
-#define BCLKCTR0_ECC (1 << 9)
-#define BCLKCTR0_USBH0 (1 << 11)
-#define BCLKCTR0_NFC (1 << 16)
-
-/* BCLKCTR1 clock bits */
-#define BCLKCTR1_USBH1 (1 << 20)
-
-/* SWRESET0 bits */
-#define SWRESET0_USBD (1 << 4)
-#define SWRESET0_USBH0 (1 << 11)
-
-/* SWRESET1 bits */
-#define SWRESET1_USBH1 (1 << 20)
-
-/* System clock sources.
- * Note: These are the clock sources that serve as parents for
- * all other clocks. They have no parents themselves.
- *
- * These values are used for struct clk->root_id. All clocks
- * that are not system clock sources have this value set to
- * CLK_SRC_NOROOT.
- * The values for system clocks start with CLK_SRC_PLL0 == 0
- * because this gives us exactly the values needed for the lower
- * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is
- * defined as -1 to not disturb the order.
- */
-enum root_clks {
- CLK_SRC_NOROOT = -1,
- CLK_SRC_PLL0 = 0,
- CLK_SRC_PLL1,
- CLK_SRC_PLL0DIV,
- CLK_SRC_PLL1DIV,
- CLK_SRC_XI,
- CLK_SRC_XIDIV,
- CLK_SRC_XTI,
- CLK_SRC_XTIDIV,
- CLK_SRC_PLL2,
- CLK_SRC_PLL2DIV,
- CLK_SRC_PK0,
- CLK_SRC_PK1,
- CLK_SRC_PK2,
- CLK_SRC_PK3,
- CLK_SRC_PK4,
- CLK_SRC_48MHZ
-};
-
-#define CLK_SRC_MASK 0xf
-
-/* Bits in ACLK* registers */
-#define ACLK_EN (1 << 28)
-#define ACLK_SEL_SHIFT 24
-#define ACLK_SEL_MASK 0x0f000000
-#define ACLK_DIV_MASK 0x00000fff
-
-/* System configuration registers */
-
-#define SCFG_BASE (APB1_PERI_BASE_VIRT + 0x13000)
-
-#define BMI_OFFS 0x00
-#define AHBCON0_OFFS 0x04
-#define APBPWE_OFFS 0x08
-#define DTCMWAIT_OFFS 0x0c
-#define ECCSEL_OFFS 0x10
-#define AHBCON1_OFFS 0x14
-#define SDHCFG_OFFS 0x18
-#define REMAP_OFFS 0x20
-#define LCDSIAE_OFFS 0x24
-#define XMCCFG_OFFS 0xe0
-#define IMCCFG_OFFS 0xe4
-
-/* Values for ECCSEL */
-#define ECCSEL_EXTMEM 0x0
-#define ECCSEL_DTCM 0x1
-#define ECCSEL_INT_SRAM 0x2
-#define ECCSEL_AHB 0x3
-
-/* Bits in XMCCFG */
-#define XMCCFG_NFCE (1 << 1)
-#define XMCCFG_FDXD (1 << 2)
-
-/* External memory controller registers */
-
-#define EMC_BASE EXT_MEM_CTRL_BASE
-
-#define SDCFG_OFFS 0x00
-#define SDFSM_OFFS 0x04
-#define MCFG_OFFS 0x08
-
-#define CSCFG0_OFFS 0x10
-#define CSCFG1_OFFS 0x14
-#define CSCFG2_OFFS 0x18
-#define CSCFG3_OFFS 0x1c
-
-#define MCFG_SDEN (1 << 4)
-
-#endif /* TCC8K_REGS_H */
diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h
deleted file mode 100644
index 057acbe651d..00000000000
--- a/arch/arm/plat-tcc/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * A definition needed by arch core code.
- *
- */
-#define CLOCK_TICK_RATE (HZ * 100000UL)
diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h
deleted file mode 100644
index 7a3e33a27a3..00000000000
--- a/arch/arm/plat-tcc/include/mach/uncompress.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This file is licensed under the terms of the GPL version 2.
- */
-
-#include <linux/serial_reg.h>
-#include <linux/types.h>
-
-#include <mach/tcc8k-regs.h>
-
-unsigned int system_rev;
-
-#define ID_MASK 0x7fff
-
-static void putc(int c)
-{
- u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2));
- u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2));
-
- while (!(*uart_lsr & UART_LSR_THRE))
- barrier();
- *uart_tx = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c
deleted file mode 100644
index cc208fae3e7..00000000000
--- a/arch/arm/plat-tcc/system.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * System functions for Telechips TCCxxxx SoCs
- *
- * Copyright (C) Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#include <linux/io.h>
-
-#include <mach/tcc8k-regs.h>
-
-/* System reboot */
-void plat_tcc_reboot(void)
-{
- /* Make sure clocks are on */
- __raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS);
-
- /* Enable watchdog reset */
- __raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS);
- /* Wait for reset */
- while(1)
- ;
-}
diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c
index 3d6a4c292ca..b33b74c8723 100644
--- a/arch/arm/plat-versatile/sched-clock.c
+++ b/arch/arm/plat-versatile/sched-clock.c
@@ -18,41 +18,24 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/kernel.h>
#include <linux/io.h>
-#include <linux/sched.h>
#include <asm/sched_clock.h>
#include <plat/sched_clock.h>
-static DEFINE_CLOCK_DATA(cd);
static void __iomem *ctr;
-/*
- * Constants generated by clocks_calc_mult_shift(m, s, 24MHz, NSEC_PER_SEC, 60).
- * This gives a resolution of about 41ns and a wrap period of about 178s.
- */
-#define SC_MULT 2796202667u
-#define SC_SHIFT 26
-
-unsigned long long notrace sched_clock(void)
+static u32 notrace versatile_read_sched_clock(void)
{
- if (ctr) {
- u32 cyc = readl(ctr);
- return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0,
- SC_MULT, SC_SHIFT);
- } else
- return 0;
-}
+ if (ctr)
+ return readl(ctr);
-static void notrace versatile_update_sched_clock(void)
-{
- u32 cyc = readl(ctr);
- update_sched_clock(&cd, cyc, (u32)~0);
+ return 0;
}
void __init versatile_sched_clock_init(void __iomem *reg, unsigned long rate)
{
ctr = reg;
- init_fixed_sched_clock(&cd, versatile_update_sched_clock,
- 32, rate, SC_MULT, SC_SHIFT);
+ setup_sched_clock(versatile_read_sched_clock, 32, rate);
}
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index ccbe16f4722..f9c9f33f8cb 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -16,7 +16,7 @@
# are merged into mainline or have been edited in the machine database
# within the last 12 months. References to machine_is_NAME() do not count!
#
-# Last update: Sat May 7 08:48:24 2011
+# Last update: Tue Dec 6 11:07:38 2011
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -269,7 +269,7 @@ dns323 MACH_DNS323 DNS323 1542
omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546
nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548
pcm038 MACH_PCM038 PCM038 1551
-ts_x09 MACH_TS209 TS209 1565
+ts209 MACH_TS209 TS209 1565
at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566
mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574
vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578
@@ -321,7 +321,6 @@ lb88rc8480 MACH_LB88RC8480 LB88RC8480 1769
mx25_3ds MACH_MX25_3DS MX25_3DS 1771
omap3530_lv_som MACH_OMAP3530_LV_SOM OMAP3530_LV_SOM 1773
davinci_da830_evm MACH_DAVINCI_DA830_EVM DAVINCI_DA830_EVM 1781
-at572d940hfek MACH_AT572D940HFEB AT572D940HFEB 1783
dove_db MACH_DOVE_DB DOVE_DB 1788
overo MACH_OVERO OVERO 1798
at2440evb MACH_AT2440EVB AT2440EVB 1799
@@ -459,7 +458,7 @@ guruplug MACH_GURUPLUG GURUPLUG 2659
spear310 MACH_SPEAR310 SPEAR310 2660
spear320 MACH_SPEAR320 SPEAR320 2661
aquila MACH_AQUILA AQUILA 2676
-sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678
+esata_sheevaplug MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678
msm7x30_surf MACH_MSM7X30_SURF MSM7X30_SURF 2679
ea2478devkit MACH_EA2478DEVKIT EA2478DEVKIT 2683
terastation_wxl MACH_TERASTATION_WXL TERASTATION_WXL 2697
@@ -491,380 +490,53 @@ eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821
eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822
eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823
smdkc210 MACH_SMDKC210 SMDKC210 2838
-omap3_braillo MACH_OMAP3_BRAILLO OMAP3_BRAILLO 2839
-spyplug MACH_SPYPLUG SPYPLUG 2840
-ginger MACH_GINGER GINGER 2841
-tny_t3530 MACH_TNY_T3530 TNY_T3530 2842
pca102 MACH_PCA102 PCA102 2843
-spade MACH_SPADE SPADE 2844
-mxc25_topaz MACH_MXC25_TOPAZ MXC25_TOPAZ 2845
t5325 MACH_T5325 T5325 2846
-gw2361 MACH_GW2361 GW2361 2847
-elog MACH_ELOG ELOG 2848
income MACH_INCOME INCOME 2849
-bcm589x MACH_BCM589X BCM589X 2850
-etna MACH_ETNA ETNA 2851
-hawks MACH_HAWKS HAWKS 2852
-meson MACH_MESON MESON 2853
-xsbase255 MACH_XSBASE255 XSBASE255 2854
-pvm2030 MACH_PVM2030 PVM2030 2855
-mioa502 MACH_MIOA502 MIOA502 2856
vvbox_sdorig2 MACH_VVBOX_SDORIG2 VVBOX_SDORIG2 2857
vvbox_sdlite2 MACH_VVBOX_SDLITE2 VVBOX_SDLITE2 2858
vvbox_sdpro4 MACH_VVBOX_SDPRO4 VVBOX_SDPRO4 2859
-htc_spv_m700 MACH_HTC_SPV_M700 HTC_SPV_M700 2860
mx257sx MACH_MX257SX MX257SX 2861
goni MACH_GONI GONI 2862
-msm8x55_svlte_ffa MACH_MSM8X55_SVLTE_FFA MSM8X55_SVLTE_FFA 2863
-msm8x55_svlte_surf MACH_MSM8X55_SVLTE_SURF MSM8X55_SVLTE_SURF 2864
-quickstep MACH_QUICKSTEP QUICKSTEP 2865
-dmw96 MACH_DMW96 DMW96 2866
-hammerhead MACH_HAMMERHEAD HAMMERHEAD 2867
-trident MACH_TRIDENT TRIDENT 2868
-lightning MACH_LIGHTNING LIGHTNING 2869
-iconnect MACH_ICONNECT ICONNECT 2870
-autobot MACH_AUTOBOT AUTOBOT 2871
-coconut MACH_COCONUT COCONUT 2872
-durian MACH_DURIAN DURIAN 2873
-cayenne MACH_CAYENNE CAYENNE 2874
-fuji MACH_FUJI FUJI 2875
-synology_6282 MACH_SYNOLOGY_6282 SYNOLOGY_6282 2876
-em1sy MACH_EM1SY EM1SY 2877
-m502 MACH_M502 M502 2878
-matrix518 MACH_MATRIX518 MATRIX518 2879
-tiny_gurnard MACH_TINY_GURNARD TINY_GURNARD 2880
-spear1310 MACH_SPEAR1310 SPEAR1310 2881
bv07 MACH_BV07 BV07 2882
-mxt_td61 MACH_MXT_TD61 MXT_TD61 2883
openrd_ultimate MACH_OPENRD_ULTIMATE OPENRD_ULTIMATE 2884
devixp MACH_DEVIXP DEVIXP 2885
miccpt MACH_MICCPT MICCPT 2886
mic256 MACH_MIC256 MIC256 2887
-as1167 MACH_AS1167 AS1167 2888
-omap3_ibiza MACH_OMAP3_IBIZA OMAP3_IBIZA 2889
u5500 MACH_U5500 U5500 2890
-davinci_picto MACH_DAVINCI_PICTO DAVINCI_PICTO 2891
-mecha MACH_MECHA MECHA 2892
-bubba3 MACH_BUBBA3 BUBBA3 2893
-pupitre MACH_PUPITRE PUPITRE 2894
-tegra_vogue MACH_TEGRA_VOGUE TEGRA_VOGUE 2896
-tegra_e1165 MACH_TEGRA_E1165 TEGRA_E1165 2897
-simplenet MACH_SIMPLENET SIMPLENET 2898
-ec4350tbm MACH_EC4350TBM EC4350TBM 2899
-pec_tc MACH_PEC_TC PEC_TC 2900
-pec_hc2 MACH_PEC_HC2 PEC_HC2 2901
-esl_mobilis_a MACH_ESL_MOBILIS_A ESL_MOBILIS_A 2902
-esl_mobilis_b MACH_ESL_MOBILIS_B ESL_MOBILIS_B 2903
-esl_wave_a MACH_ESL_WAVE_A ESL_WAVE_A 2904
-esl_wave_b MACH_ESL_WAVE_B ESL_WAVE_B 2905
-unisense_mmm MACH_UNISENSE_MMM UNISENSE_MMM 2906
-blueshark MACH_BLUESHARK BLUESHARK 2907
-e10 MACH_E10 E10 2908
-app3k_robin MACH_APP3K_ROBIN APP3K_ROBIN 2909
-pov15hd MACH_POV15HD POV15HD 2910
-stella MACH_STELLA STELLA 2911
linkstation_lschl MACH_LINKSTATION_LSCHL LINKSTATION_LSCHL 2913
-netwalker MACH_NETWALKER NETWALKER 2914
-acsx106 MACH_ACSX106 ACSX106 2915
-atlas5_c1 MACH_ATLAS5_C1 ATLAS5_C1 2916
-nsb3ast MACH_NSB3AST NSB3AST 2917
-gnet_slc MACH_GNET_SLC GNET_SLC 2918
-af4000 MACH_AF4000 AF4000 2919
-ark9431 MACH_ARK9431 ARK9431 2920
-fs_s5pc100 MACH_FS_S5PC100 FS_S5PC100 2921
-omap3505nova8 MACH_OMAP3505NOVA8 OMAP3505NOVA8 2922
-omap3621_edp1 MACH_OMAP3621_EDP1 OMAP3621_EDP1 2923
-oratisaes MACH_ORATISAES ORATISAES 2924
smdkv310 MACH_SMDKV310 SMDKV310 2925
-siemens_l0 MACH_SIEMENS_L0 SIEMENS_L0 2926
-ventana MACH_VENTANA VENTANA 2927
wm8505_7in_netbook MACH_WM8505_7IN_NETBOOK WM8505_7IN_NETBOOK 2928
-ec4350sdb MACH_EC4350SDB EC4350SDB 2929
-mimas MACH_MIMAS MIMAS 2930
-titan MACH_TITAN TITAN 2931
craneboard MACH_CRANEBOARD CRANEBOARD 2932
-es2440 MACH_ES2440 ES2440 2933
-najay_a9263 MACH_NAJAY_A9263 NAJAY_A9263 2934
-htctornado MACH_HTCTORNADO HTCTORNADO 2935
-dimm_mx257 MACH_DIMM_MX257 DIMM_MX257 2936
-jigen301 MACH_JIGEN JIGEN 2937
smdk6450 MACH_SMDK6450 SMDK6450 2938
-meno_qng MACH_MENO_QNG MENO_QNG 2939
-ns2416 MACH_NS2416 NS2416 2940
-rpc353 MACH_RPC353 RPC353 2941
-tq6410 MACH_TQ6410 TQ6410 2942
-sky6410 MACH_SKY6410 SKY6410 2943
-dynasty MACH_DYNASTY DYNASTY 2944
-vivo MACH_VIVO VIVO 2945
-bury_bl7582 MACH_BURY_BL7582 BURY_BL7582 2946
-bury_bps5270 MACH_BURY_BPS5270 BURY_BPS5270 2947
-basi MACH_BASI BASI 2948
-tn200 MACH_TN200 TN200 2949
-c2mmi MACH_C2MMI C2MMI 2950
-meson_6236m MACH_MESON_6236M MESON_6236M 2951
-meson_8626m MACH_MESON_8626M MESON_8626M 2952
-tube MACH_TUBE TUBE 2953
-messina MACH_MESSINA MESSINA 2954
-mx50_arm2 MACH_MX50_ARM2 MX50_ARM2 2955
-cetus9263 MACH_CETUS9263 CETUS9263 2956
brownstone MACH_BROWNSTONE BROWNSTONE 2957
-vmx25 MACH_VMX25 VMX25 2958
-vmx51 MACH_VMX51 VMX51 2959
-abacus MACH_ABACUS ABACUS 2960
-cm4745 MACH_CM4745 CM4745 2961
-oratislink MACH_ORATISLINK ORATISLINK 2962
-davinci_dm365_dvr MACH_DAVINCI_DM365_DVR DAVINCI_DM365_DVR 2963
-netviz MACH_NETVIZ NETVIZ 2964
flexibity MACH_FLEXIBITY FLEXIBITY 2965
-wlan_computer MACH_WLAN_COMPUTER WLAN_COMPUTER 2966
-lpc24xx MACH_LPC24XX LPC24XX 2967
-spica MACH_SPICA SPICA 2968
-gpsdisplay MACH_GPSDISPLAY GPSDISPLAY 2969
-bipnet MACH_BIPNET BIPNET 2970
-overo_ctu_inertial MACH_OVERO_CTU_INERTIAL OVERO_CTU_INERTIAL 2971
-davinci_dm355_mmm MACH_DAVINCI_DM355_MMM DAVINCI_DM355_MMM 2972
-pc9260_v2 MACH_PC9260_V2 PC9260_V2 2973
-ptx7545 MACH_PTX7545 PTX7545 2974
-tm_efdc MACH_TM_EFDC TM_EFDC 2975
-omap3_waldo1 MACH_OMAP3_WALDO1 OMAP3_WALDO1 2977
-flyer MACH_FLYER FLYER 2978
-tornado3240 MACH_TORNADO3240 TORNADO3240 2979
-soli_01 MACH_SOLI_01 SOLI_01 2980
-omapl138_europalc MACH_OMAPL138_EUROPALC OMAPL138_EUROPALC 2981
-helios_v1 MACH_HELIOS_V1 HELIOS_V1 2982
-netspace_lite_v2 MACH_NETSPACE_LITE_V2 NETSPACE_LITE_V2 2983
-ssc MACH_SSC SSC 2984
-premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985
-wasabi MACH_WASABI WASABI 2986
mx50_rdp MACH_MX50_RDP MX50_RDP 2988
universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989
real6410 MACH_REAL6410 REAL6410 2990
-spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991
-ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992
-omap3_bc10 MACH_OMAP3_BC10 OMAP3_BC10 2993
-thebe MACH_THEBE THEBE 2994
-rv082 MACH_RV082 RV082 2995
-armlguest MACH_ARMLGUEST ARMLGUEST 2996
-tjinc1000 MACH_TJINC1000 TJINC1000 2997
dockstar MACH_DOCKSTAR DOCKSTAR 2998
-ax8008 MACH_AX8008 AX8008 2999
-gnet_sgce MACH_GNET_SGCE GNET_SGCE 3000
-pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001
-ea20 MACH_EA20 EA20 3002
-awm2 MACH_AWM2 AWM2 3003
ti8148evm MACH_TI8148EVM TI8148EVM 3004
seaboard MACH_SEABOARD SEABOARD 3005
-linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006
-tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007
-rubys MACH_RUBYS RUBYS 3008
-aquarius MACH_AQUARIUS AQUARIUS 3009
mx53_ard MACH_MX53_ARD MX53_ARD 3010
mx53_smd MACH_MX53_SMD MX53_SMD 3011
-lswxl MACH_LSWXL LSWXL 3012
-dove_avng_v3 MACH_DOVE_AVNG_V3 DOVE_AVNG_V3 3013
-sdi_ess_9263 MACH_SDI_ESS_9263 SDI_ESS_9263 3014
-jocpu550 MACH_JOCPU550 JOCPU550 3015
msm8x60_rumi3 MACH_MSM8X60_RUMI3 MSM8X60_RUMI3 3016
msm8x60_ffa MACH_MSM8X60_FFA MSM8X60_FFA 3017
-yanomami MACH_YANOMAMI YANOMAMI 3018
-gta04 MACH_GTA04 GTA04 3019
cm_a510 MACH_CM_A510 CM_A510 3020
-omap3_rfs200 MACH_OMAP3_RFS200 OMAP3_RFS200 3021
-kx33xx MACH_KX33XX KX33XX 3022
-ptx7510 MACH_PTX7510 PTX7510 3023
-top9000 MACH_TOP9000 TOP9000 3024
-teenote MACH_TEENOTE TEENOTE 3025
-ts3 MACH_TS3 TS3 3026
-a0 MACH_A0 A0 3027
-fsm9xxx_surf MACH_FSM9XXX_SURF FSM9XXX_SURF 3028
-fsm9xxx_ffa MACH_FSM9XXX_FFA FSM9XXX_FFA 3029
-frrhwcdma60w MACH_FRRHWCDMA60W FRRHWCDMA60W 3030
-remus MACH_REMUS REMUS 3031
-at91cap7xdk MACH_AT91CAP7XDK AT91CAP7XDK 3032
-at91cap7stk MACH_AT91CAP7STK AT91CAP7STK 3033
-kt_sbc_sam9_1 MACH_KT_SBC_SAM9_1 KT_SBC_SAM9_1 3034
-armada_xp_db MACH_ARMADA_XP_DB ARMADA_XP_DB 3036
-spdm MACH_SPDM SPDM 3037
-gtib MACH_GTIB GTIB 3038
-dgm3240 MACH_DGM3240 DGM3240 3039
-htcmega MACH_HTCMEGA HTCMEGA 3041
-tricorder MACH_TRICORDER TRICORDER 3042
tx28 MACH_TX28 TX28 3043
-bstbrd MACH_BSTBRD BSTBRD 3044
-pwb3090 MACH_PWB3090 PWB3090 3045
-idea6410 MACH_IDEA6410 IDEA6410 3046
-qbc9263 MACH_QBC9263 QBC9263 3047
-borabora MACH_BORABORA BORABORA 3048
-valdez MACH_VALDEZ VALDEZ 3049
-ls9g20 MACH_LS9G20 LS9G20 3050
-mios_v1 MACH_MIOS_V1 MIOS_V1 3051
-s5pc110_crespo MACH_S5PC110_CRESPO S5PC110_CRESPO 3052
-controltek9g20 MACH_CONTROLTEK9G20 CONTROLTEK9G20 3053
-tin307 MACH_TIN307 TIN307 3054
-tin510 MACH_TIN510 TIN510 3055
-bluecheese MACH_BLUECHEESE BLUECHEESE 3057
-tem3x30 MACH_TEM3X30 TEM3X30 3058
-harvest_desoto MACH_HARVEST_DESOTO HARVEST_DESOTO 3059
-msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060
-spear900 MACH_SPEAR900 SPEAR900 3061
pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062
-rdstor MACH_RDSTOR RDSTOR 3063
-usdloader MACH_USDLOADER USDLOADER 3064
-tsoploader MACH_TSOPLOADER TSOPLOADER 3065
-kronos MACH_KRONOS KRONOS 3066
-ffcore MACH_FFCORE FFCORE 3067
-mone MACH_MONE MONE 3068
-unit2s MACH_UNIT2S UNIT2S 3069
-acer_a5 MACH_ACER_A5 ACER_A5 3070
-etherpro_isp MACH_ETHERPRO_ISP ETHERPRO_ISP 3071
-stretchs7000 MACH_STRETCHS7000 STRETCHS7000 3072
-p87_smartsim MACH_P87_SMARTSIM P87_SMARTSIM 3073
-tulip MACH_TULIP TULIP 3074
-sunflower MACH_SUNFLOWER SUNFLOWER 3075
-rib MACH_RIB RIB 3076
-clod MACH_CLOD CLOD 3077
-rump MACH_RUMP RUMP 3078
-tenderloin MACH_TENDERLOIN TENDERLOIN 3079
-shortloin MACH_SHORTLOIN SHORTLOIN 3080
-antares MACH_ANTARES ANTARES 3082
-wb40n MACH_WB40N WB40N 3083
-herring MACH_HERRING HERRING 3084
-naxy400 MACH_NAXY400 NAXY400 3085
-naxy1200 MACH_NAXY1200 NAXY1200 3086
vpr200 MACH_VPR200 VPR200 3087
-bug20 MACH_BUG20 BUG20 3088
-goflexnet MACH_GOFLEXNET GOFLEXNET 3089
torbreck MACH_TORBRECK TORBRECK 3090
-saarb_mg1 MACH_SAARB_MG1 SAARB_MG1 3091
-callisto MACH_CALLISTO CALLISTO 3092
-multhsu MACH_MULTHSU MULTHSU 3093
-saluda MACH_SALUDA SALUDA 3094
-pemp_omap3_apollo MACH_PEMP_OMAP3_APOLLO PEMP_OMAP3_APOLLO 3095
-vc0718 MACH_VC0718 VC0718 3096
-mvblx MACH_MVBLX MVBLX 3097
-inhand_apeiron MACH_INHAND_APEIRON INHAND_APEIRON 3098
-inhand_fury MACH_INHAND_FURY INHAND_FURY 3099
-inhand_siren MACH_INHAND_SIREN INHAND_SIREN 3100
-hdnvp MACH_HDNVP HDNVP 3101
-softwinner MACH_SOFTWINNER SOFTWINNER 3102
prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103
-nas6210 MACH_NAS6210 NAS6210 3104
-unisdev MACH_UNISDEV UNISDEV 3105
-sbca11 MACH_SBCA11 SBCA11 3106
-saga MACH_SAGA SAGA 3107
-ns_k330 MACH_NS_K330 NS_K330 3108
-tanna MACH_TANNA TANNA 3109
-imate8502 MACH_IMATE8502 IMATE8502 3110
-aspen MACH_ASPEN ASPEN 3111
-daintree_cwac MACH_DAINTREE_CWAC DAINTREE_CWAC 3112
-zmx25 MACH_ZMX25 ZMX25 3113
-maple1 MACH_MAPLE1 MAPLE1 3114
-qsd8x72_surf MACH_QSD8X72_SURF QSD8X72_SURF 3115
-qsd8x72_ffa MACH_QSD8X72_FFA QSD8X72_FFA 3116
-abilene MACH_ABILENE ABILENE 3117
-eigen_ttr MACH_EIGEN_TTR EIGEN_TTR 3118
-iomega_ix2_200 MACH_IOMEGA_IX2_200 IOMEGA_IX2_200 3119
-coretec_vcx7400 MACH_CORETEC_VCX7400 CORETEC_VCX7400 3120
-santiago MACH_SANTIAGO SANTIAGO 3121
-mx257sol MACH_MX257SOL MX257SOL 3122
-strasbourg MACH_STRASBOURG STRASBOURG 3123
-msm8x60_fluid MACH_MSM8X60_FLUID MSM8X60_FLUID 3124
-smartqv5 MACH_SMARTQV5 SMARTQV5 3125
-smartqv3 MACH_SMARTQV3 SMARTQV3 3126
-smartqv7 MACH_SMARTQV7 SMARTQV7 3127
paz00 MACH_PAZ00 PAZ00 3128
acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129
-fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131
-hdgu MACH_HDGU HDGU 3132
-pyramid MACH_PYRAMID PYRAMID 3133
-epiphan MACH_EPIPHAN EPIPHAN 3134
-omap_bender MACH_OMAP_BENDER OMAP_BENDER 3135
-gurnard MACH_GURNARD GURNARD 3136
-gtl_it5100 MACH_GTL_IT5100 GTL_IT5100 3137
-bcm2708 MACH_BCM2708 BCM2708 3138
-mx51_ggc MACH_MX51_GGC MX51_GGC 3139
-sharespace MACH_SHARESPACE SHARESPACE 3140
-haba_knx_explorer MACH_HABA_KNX_EXPLORER HABA_KNX_EXPLORER 3141
-simtec_kirkmod MACH_SIMTEC_KIRKMOD SIMTEC_KIRKMOD 3142
-crux MACH_CRUX CRUX 3143
-mx51_bravo MACH_MX51_BRAVO MX51_BRAVO 3144
-charon MACH_CHARON CHARON 3145
-picocom3 MACH_PICOCOM3 PICOCOM3 3146
-picocom4 MACH_PICOCOM4 PICOCOM4 3147
-serrano MACH_SERRANO SERRANO 3148
-doubleshot MACH_DOUBLESHOT DOUBLESHOT 3149
-evsy MACH_EVSY EVSY 3150
-huashan MACH_HUASHAN HUASHAN 3151
-lausanne MACH_LAUSANNE LAUSANNE 3152
-emerald MACH_EMERALD EMERALD 3153
-tqma35 MACH_TQMA35 TQMA35 3154
-marvel MACH_MARVEL MARVEL 3155
-manuae MACH_MANUAE MANUAE 3156
-chacha MACH_CHACHA CHACHA 3157
-lemon MACH_LEMON LEMON 3158
-csc MACH_CSC CSC 3159
-gira_knxip_router MACH_GIRA_KNXIP_ROUTER GIRA_KNXIP_ROUTER 3160
-t20 MACH_T20 T20 3161
-hdmini MACH_HDMINI HDMINI 3162
-sciphone_g2 MACH_SCIPHONE_G2 SCIPHONE_G2 3163
-express MACH_EXPRESS EXPRESS 3164
-express_kt MACH_EXPRESS_KT EXPRESS_KT 3165
-maximasp MACH_MAXIMASP MAXIMASP 3166
-nitrogen_imx51 MACH_NITROGEN_IMX51 NITROGEN_IMX51 3167
-nitrogen_imx53 MACH_NITROGEN_IMX53 NITROGEN_IMX53 3168
-sunfire MACH_SUNFIRE SUNFIRE 3169
-arowana MACH_AROWANA AROWANA 3170
-tegra_daytona MACH_TEGRA_DAYTONA TEGRA_DAYTONA 3171
-tegra_swordfish MACH_TEGRA_SWORDFISH TEGRA_SWORDFISH 3172
-edison MACH_EDISON EDISON 3173
-svp8500v1 MACH_SVP8500V1 SVP8500V1 3174
-svp8500v2 MACH_SVP8500V2 SVP8500V2 3175
-svp5500 MACH_SVP5500 SVP5500 3176
-b5500 MACH_B5500 B5500 3177
-s5500 MACH_S5500 S5500 3178
-icon MACH_ICON ICON 3179
-elephant MACH_ELEPHANT ELEPHANT 3180
-shooter MACH_SHOOTER SHOOTER 3182
-spade_lte MACH_SPADE_LTE SPADE_LTE 3183
-philhwani MACH_PHILHWANI PHILHWANI 3184
-gsncomm MACH_GSNCOMM GSNCOMM 3185
-strasbourg_a2 MACH_STRASBOURG_A2 STRASBOURG_A2 3186
-mmm MACH_MMM MMM 3187
-davinci_dm365_bv MACH_DAVINCI_DM365_BV DAVINCI_DM365_BV 3188
ag5evm MACH_AG5EVM AG5EVM 3189
-sc575plc MACH_SC575PLC SC575PLC 3190
-sc575hmi MACH_SC575IPC SC575IPC 3191
-omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192
-top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194
-top9000_su MACH_TOP9000_SU TOP9000_SU 3195
-utm300 MACH_UTM300 UTM300 3196
tsunagi MACH_TSUNAGI TSUNAGI 3197
-ts75xx MACH_TS75XX TS75XX 3198
-ts47xx MACH_TS47XX TS47XX 3200
-da850_k5 MACH_DA850_K5 DA850_K5 3201
-ax502 MACH_AX502 AX502 3202
-igep0032 MACH_IGEP0032 IGEP0032 3203
-antero MACH_ANTERO ANTERO 3204
-synergy MACH_SYNERGY SYNERGY 3205
ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206
wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207
-punica MACH_PUNICA PUNICA 3208
trimslice MACH_TRIMSLICE TRIMSLICE 3209
-mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210
mackerel MACH_MACKEREL MACKEREL 3211
-fa9x27 MACH_FA9X27 FA9X27 3213
-ns2816tb MACH_NS2816TB NS2816TB 3214
-ns2816_ntpad MACH_NS2816_NTPAD NS2816_NTPAD 3215
-ns2816_ntnb MACH_NS2816_NTNB NS2816_NTNB 3216
kaen MACH_KAEN KAEN 3217
-nv1000 MACH_NV1000 NV1000 3218
-nuc950ts MACH_NUC950TS NUC950TS 3219
nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220
-ast2200 MACH_AST2200 AST2200 3221
-lead MACH_LEAD LEAD 3222
-unino1 MACH_UNINO1 UNINO1 3223
-greeco MACH_GREECO GREECO 3224
-verdi MACH_VERDI VERDI 3225
dm6446_adbox MACH_DM6446_ADBOX DM6446_ADBOX 3226
quad_salsa MACH_QUAD_SALSA QUAD_SALSA 3227
abb_gma_1_1 MACH_ABB_GMA_1_1 ABB_GMA_1_1 3228
@@ -949,13 +621,11 @@ koi MACH_KOI KOI 3312
ts4800 MACH_TS4800 TS4800 3313
tqma9263 MACH_TQMA9263 TQMA9263 3314
holiday MACH_HOLIDAY HOLIDAY 3315
-dma_6410 MACH_DMA6410 DMA6410 3316
pcats_overlay MACH_PCATS_OVERLAY PCATS_OVERLAY 3317
hwgw6410 MACH_HWGW6410 HWGW6410 3318
shenzhou MACH_SHENZHOU SHENZHOU 3319
cwme9210 MACH_CWME9210 CWME9210 3320
cwme9210js MACH_CWME9210JS CWME9210JS 3321
-pgs_v1 MACH_PGS_SITARA PGS_SITARA 3322
colibri_tegra2 MACH_COLIBRI_TEGRA2 COLIBRI_TEGRA2 3323
w21 MACH_W21 W21 3324
polysat1 MACH_POLYSAT1 POLYSAT1 3325
@@ -1021,13 +691,11 @@ viprinet MACH_VIPRINET VIPRINET 3385
bockw MACH_BOCKW BOCKW 3386
eva2000 MACH_EVA2000 EVA2000 3387
steelyard MACH_STEELYARD STEELYARD 3388
-sdh001 MACH_MACH_SDH001 MACH_SDH001 3390
nsslsboard MACH_NSSLSBOARD NSSLSBOARD 3392
geneva_b5 MACH_GENEVA_B5 GENEVA_B5 3393
spear1340 MACH_SPEAR1340 SPEAR1340 3394
rexmas MACH_REXMAS REXMAS 3395
msm8960_cdp MACH_MSM8960_CDP MSM8960_CDP 3396
-msm8960_mdp MACH_MSM8960_MDP MSM8960_MDP 3397
msm8960_fluid MACH_MSM8960_FLUID MSM8960_FLUID 3398
msm8960_apq MACH_MSM8960_APQ MSM8960_APQ 3399
helios_v2 MACH_HELIOS_V2 HELIOS_V2 3400
@@ -1123,6 +791,381 @@ blissc MACH_BLISSC BLISSC 3491
thales_adc MACH_THALES_ADC THALES_ADC 3492
ubisys_p9d_evp MACH_UBISYS_P9D_EVP UBISYS_P9D_EVP 3493
atdgp318 MACH_ATDGP318 ATDGP318 3494
+dma210u MACH_DMA210U DMA210U 3495
+em_t3 MACH_EM_T3 EM_T3 3496
+htx3250 MACH_HTX3250 HTX3250 3497
+g50 MACH_G50 G50 3498
+eco5 MACH_ECO5 ECO5 3499
+wintergrasp MACH_WINTERGRASP WINTERGRASP 3500
+puro MACH_PURO PURO 3501
+shooter_k MACH_SHOOTER_K SHOOTER_K 3502
+nspire MACH_NSPIRE NSPIRE 3503
+mickxx MACH_MICKXX MICKXX 3504
+lxmb MACH_LXMB LXMB 3505
+adam MACH_ADAM ADAM 3507
+b1004 MACH_B1004 B1004 3508
+oboea MACH_OBOEA OBOEA 3509
+a1015 MACH_A1015 A1015 3510
+robin_vbdt30 MACH_ROBIN_VBDT30 ROBIN_VBDT30 3511
+tegra_enterprise MACH_TEGRA_ENTERPRISE TEGRA_ENTERPRISE 3512
+rfl108200_mk10 MACH_RFL108200_MK10 RFL108200_MK10 3513
+rfl108300_mk16 MACH_RFL108300_MK16 RFL108300_MK16 3514
+rover_v7 MACH_ROVER_V7 ROVER_V7 3515
+miphone MACH_MIPHONE MIPHONE 3516
+femtobts MACH_FEMTOBTS FEMTOBTS 3517
+monopoli MACH_MONOPOLI MONOPOLI 3518
+boss MACH_BOSS BOSS 3519
+davinci_dm368_vtam MACH_DAVINCI_DM368_VTAM DAVINCI_DM368_VTAM 3520
+clcon MACH_CLCON CLCON 3521
+nokia_rm696 MACH_NOKIA_RM696 NOKIA_RM696 3522
+tahiti MACH_TAHITI TAHITI 3523
+fighter MACH_FIGHTER FIGHTER 3524
+sgh_i710 MACH_SGH_I710 SGH_I710 3525
+integreproscb MACH_INTEGREPROSCB INTEGREPROSCB 3526
+monza MACH_MONZA MONZA 3527
+calimain MACH_CALIMAIN CALIMAIN 3528
+mx6q_sabreauto MACH_MX6Q_SABREAUTO MX6Q_SABREAUTO 3529
+gma01x MACH_GMA01X GMA01X 3530
+sbc51 MACH_SBC51 SBC51 3531
+fit MACH_FIT FIT 3532
+steelhead MACH_STEELHEAD STEELHEAD 3533
+panther MACH_PANTHER PANTHER 3534
+msm8960_liquid MACH_MSM8960_LIQUID MSM8960_LIQUID 3535
+lexikonct MACH_LEXIKONCT LEXIKONCT 3536
+ns2816_stb MACH_NS2816_STB NS2816_STB 3537
+sei_mm2_lpc3250 MACH_SEI_MM2_LPC3250 SEI_MM2_LPC3250 3538
+cmimx53 MACH_CMIMX53 CMIMX53 3539
+sandwich MACH_SANDWICH SANDWICH 3540
+chief MACH_CHIEF CHIEF 3541
+pogo_e02 MACH_POGO_E02 POGO_E02 3542
+mikrap_x168 MACH_MIKRAP_X168 MIKRAP_X168 3543
+htcmozart MACH_HTCMOZART HTCMOZART 3544
+htcgold MACH_HTCGOLD HTCGOLD 3545
+mt72xx MACH_MT72XX MT72XX 3546
+mx51_ivy MACH_MX51_IVY MX51_IVY 3547
+mx51_lvd MACH_MX51_LVD MX51_LVD 3548
+omap3_wiser2 MACH_OMAP3_WISER2 OMAP3_WISER2 3549
+dreamplug MACH_DREAMPLUG DREAMPLUG 3550
+cobas_c_111 MACH_COBAS_C_111 COBAS_C_111 3551
+cobas_u_411 MACH_COBAS_U_411 COBAS_U_411 3552
+hssd MACH_HSSD HSSD 3553
+iom35x MACH_IOM35X IOM35X 3554
+psom_omap MACH_PSOM_OMAP PSOM_OMAP 3555
+iphone_2g MACH_IPHONE_2G IPHONE_2G 3556
+iphone_3g MACH_IPHONE_3G IPHONE_3G 3557
+ipod_touch_1g MACH_IPOD_TOUCH_1G IPOD_TOUCH_1G 3558
+pharos_tpc MACH_PHAROS_TPC PHAROS_TPC 3559
+mx53_hydra MACH_MX53_HYDRA MX53_HYDRA 3560
+ns2816_dev_board MACH_NS2816_DEV_BOARD NS2816_DEV_BOARD 3561
+iphone_3gs MACH_IPHONE_3GS IPHONE_3GS 3562
+iphone_4 MACH_IPHONE_4 IPHONE_4 3563
+ipod_touch_4g MACH_IPOD_TOUCH_4G IPOD_TOUCH_4G 3564
+dragon_e1100 MACH_DRAGON_E1100 DRAGON_E1100 3565
+topside MACH_TOPSIDE TOPSIDE 3566
+irisiii MACH_IRISIII IRISIII 3567
+deto_macarm9 MACH_DETO_MACARM9 DETO_MACARM9 3568
+eti_d1 MACH_ETI_D1 ETI_D1 3569
+som3530sdk MACH_SOM3530SDK SOM3530SDK 3570
+oc_engine MACH_OC_ENGINE OC_ENGINE 3571
+apq8064_sim MACH_APQ8064_SIM APQ8064_SIM 3572
+alps MACH_ALPS ALPS 3575
+tny_t3730 MACH_TNY_T3730 TNY_T3730 3576
+geryon_nfe MACH_GERYON_NFE GERYON_NFE 3577
+ns2816_ref_board MACH_NS2816_REF_BOARD NS2816_REF_BOARD 3578
+silverstone MACH_SILVERSTONE SILVERSTONE 3579
+mtt2440 MACH_MTT2440 MTT2440 3580
+ynicdb MACH_YNICDB YNICDB 3581
+bct MACH_BCT BCT 3582
+tuscan MACH_TUSCAN TUSCAN 3583
+xbt_sam9g45 MACH_XBT_SAM9G45 XBT_SAM9G45 3584
+enbw_cmc MACH_ENBW_CMC ENBW_CMC 3585
+ch104mx257 MACH_CH104MX257 CH104MX257 3587
+openpri MACH_OPENPRI OPENPRI 3588
+am335xevm MACH_AM335XEVM AM335XEVM 3589
+picodmb MACH_PICODMB PICODMB 3590
+waluigi MACH_WALUIGI WALUIGI 3591
+punicag7 MACH_PUNICAG7 PUNICAG7 3592
+ipad_1g MACH_IPAD_1G IPAD_1G 3593
+appletv_2g MACH_APPLETV_2G APPLETV_2G 3594
+mach_ecog45 MACH_MACH_ECOG45 MACH_ECOG45 3595
+ait_cam_enc_4xx MACH_AIT_CAM_ENC_4XX AIT_CAM_ENC_4XX 3596
+runnymede MACH_RUNNYMEDE RUNNYMEDE 3597
+play MACH_PLAY PLAY 3598
+hw90260 MACH_HW90260 HW90260 3599
+tagh MACH_TAGH TAGH 3600
+filbert MACH_FILBERT FILBERT 3601
+getinge_netcomv3 MACH_GETINGE_NETCOMV3 GETINGE_NETCOMV3 3602
+cw20 MACH_CW20 CW20 3603
+cinema MACH_CINEMA CINEMA 3604
+cinema_tea MACH_CINEMA_TEA CINEMA_TEA 3605
+cinema_coffee MACH_CINEMA_COFFEE CINEMA_COFFEE 3606
+cinema_juice MACH_CINEMA_JUICE CINEMA_JUICE 3607
+mx53_mirage2 MACH_MX53_MIRAGE2 MX53_MIRAGE2 3609
+mx53_efikasb MACH_MX53_EFIKASB MX53_EFIKASB 3610
+stm_b2000 MACH_STM_B2000 STM_B2000 3612
m28evk MACH_M28EVK M28EVK 3613
+pda MACH_PDA PDA 3614
+meraki_mr58 MACH_MERAKI_MR58 MERAKI_MR58 3615
+kota2 MACH_KOTA2 KOTA2 3616
+letcool MACH_LETCOOL LETCOOL 3617
+mx27iat MACH_MX27IAT MX27IAT 3618
+apollo_td MACH_APOLLO_TD APOLLO_TD 3619
+arena MACH_ARENA ARENA 3620
+gsngateway MACH_GSNGATEWAY GSNGATEWAY 3621
+lf2000 MACH_LF2000 LF2000 3622
+bonito MACH_BONITO BONITO 3623
+asymptote MACH_ASYMPTOTE ASYMPTOTE 3624
+bst2brd MACH_BST2BRD BST2BRD 3625
+tx335s MACH_TX335S TX335S 3626
+pelco_tesla MACH_PELCO_TESLA PELCO_TESLA 3627
+rrhtestplat MACH_RRHTESTPLAT RRHTESTPLAT 3628
+vidtonic_pro MACH_VIDTONIC_PRO VIDTONIC_PRO 3629
+pl_apollo MACH_PL_APOLLO PL_APOLLO 3630
+pl_phoenix MACH_PL_PHOENIX PL_PHOENIX 3631
+m28cu3 MACH_M28CU3 M28CU3 3632
+vvbox_hd MACH_VVBOX_HD VVBOX_HD 3633
+coreware_sam9260_ MACH_COREWARE_SAM9260_ COREWARE_SAM9260_ 3634
+marmaduke MACH_MARMADUKE MARMADUKE 3635
+amg_xlcore_camera MACH_AMG_XLCORE_CAMERA AMG_XLCORE_CAMERA 3636
+omap3_egf MACH_OMAP3_EGF OMAP3_EGF 3637
smdk4212 MACH_SMDK4212 SMDK4212 3638
+dnp9200 MACH_DNP9200 DNP9200 3639
+tf101 MACH_TF101 TF101 3640
+omap3silvio MACH_OMAP3SILVIO OMAP3SILVIO 3641
+picasso2 MACH_PICASSO2 PICASSO2 3642
+vangogh2 MACH_VANGOGH2 VANGOGH2 3643
+olpc_xo_1_75 MACH_OLPC_XO_1_75 OLPC_XO_1_75 3644
+gx400 MACH_GX400 GX400 3645
+gs300 MACH_GS300 GS300 3646
+acer_a9 MACH_ACER_A9 ACER_A9 3647
+vivow_evm MACH_VIVOW_EVM VIVOW_EVM 3648
+veloce_cxq MACH_VELOCE_CXQ VELOCE_CXQ 3649
+veloce_cxm MACH_VELOCE_CXM VELOCE_CXM 3650
+p1852 MACH_P1852 P1852 3651
+naxy100 MACH_NAXY100 NAXY100 3652
+taishan MACH_TAISHAN TAISHAN 3653
+touchlink MACH_TOUCHLINK TOUCHLINK 3654
+stm32f103ze MACH_STM32F103ZE STM32F103ZE 3655
+mcx MACH_MCX MCX 3656
+stm_nmhdk_fli7610 MACH_STM_NMHDK_FLI7610 STM_NMHDK_FLI7610 3657
+top28x MACH_TOP28X TOP28X 3658
+okl4vp_microvisor MACH_OKL4VP_MICROVISOR OKL4VP_MICROVISOR 3659
+pop MACH_POP POP 3660
+layer MACH_LAYER LAYER 3661
+trondheim MACH_TRONDHEIM TRONDHEIM 3662
+eva MACH_EVA EVA 3663
+trust_taurus MACH_TRUST_TAURUS TRUST_TAURUS 3664
+ns2816_huashan MACH_NS2816_HUASHAN NS2816_HUASHAN 3665
+ns2816_yangcheng MACH_NS2816_YANGCHENG NS2816_YANGCHENG 3666
+p852 MACH_P852 P852 3667
+flea3 MACH_FLEA3 FLEA3 3668
+bowfin MACH_BOWFIN BOWFIN 3669
+mv88de3100 MACH_MV88DE3100 MV88DE3100 3670
+pia_am35x MACH_PIA_AM35X PIA_AM35X 3671
+cedar MACH_CEDAR CEDAR 3672
+picasso_e MACH_PICASSO_E PICASSO_E 3673
+samsung_e60 MACH_SAMSUNG_E60 SAMSUNG_E60 3674
+sdvr_mini MACH_SDVR_MINI SDVR_MINI 3676
+omap3_ij3k MACH_OMAP3_IJ3K OMAP3_IJ3K 3677
+modasmc1 MACH_MODASMC1 MODASMC1 3678
+apq8064_rumi3 MACH_APQ8064_RUMI3 APQ8064_RUMI3 3679
+matrix506 MACH_MATRIX506 MATRIX506 3680
+msm9615_mtp MACH_MSM9615_MTP MSM9615_MTP 3681
+dm36x_spawndc MACH_DM36X_SPAWNDC DM36X_SPAWNDC 3682
+sff792 MACH_SFF792 SFF792 3683
+am335xiaevm MACH_AM335XIAEVM AM335XIAEVM 3684
+g3c2440 MACH_G3C2440 G3C2440 3685
+tion270 MACH_TION270 TION270 3686
+w22q7arm02 MACH_W22Q7ARM02 W22Q7ARM02 3687
+omap_cat MACH_OMAP_CAT OMAP_CAT 3688
+at91sam9n12ek MACH_AT91SAM9N12EK AT91SAM9N12EK 3689
+morrison MACH_MORRISON MORRISON 3690
+svdu MACH_SVDU SVDU 3691
+lpp01 MACH_LPP01 LPP01 3692
+ubc283 MACH_UBC283 UBC283 3693
+zeppelin MACH_ZEPPELIN ZEPPELIN 3694
+motus MACH_MOTUS MOTUS 3695
+neomainboard MACH_NEOMAINBOARD NEOMAINBOARD 3696
+devkit3250 MACH_DEVKIT3250 DEVKIT3250 3697
+devkit7000 MACH_DEVKIT7000 DEVKIT7000 3698
+fmc_uic MACH_FMC_UIC FMC_UIC 3699
+fmc_dcm MACH_FMC_DCM FMC_DCM 3700
+batwm MACH_BATWM BATWM 3701
+atlas6cb MACH_ATLAS6CB ATLAS6CB 3702
+blue MACH_BLUE BLUE 3705
+colorado MACH_COLORADO COLORADO 3706
+popc MACH_POPC POPC 3707
+promwad_jade MACH_PROMWAD_JADE PROMWAD_JADE 3708
+amp MACH_AMP AMP 3709
+gnet_amp MACH_GNET_AMP GNET_AMP 3710
+toques MACH_TOQUES TOQUES 3711
+dct_storm MACH_DCT_STORM DCT_STORM 3713
+owl MACH_OWL OWL 3715
+cogent_csb1741 MACH_COGENT_CSB1741 COGENT_CSB1741 3716
+adillustra610 MACH_ADILLUSTRA610 ADILLUSTRA610 3718
+ecafe_na04 MACH_ECAFE_NA04 ECAFE_NA04 3719
+popct MACH_POPCT POPCT 3720
+omap3_helena MACH_OMAP3_HELENA OMAP3_HELENA 3721
+ach MACH_ACH ACH 3722
+module_dtb MACH_MODULE_DTB MODULE_DTB 3723
+oslo_elisabeth MACH_OSLO_ELISABETH OSLO_ELISABETH 3725
+tt01 MACH_TT01 TT01 3726
+msm8930_cdp MACH_MSM8930_CDP MSM8930_CDP 3727
+msm8930_mtp MACH_MSM8930_MTP MSM8930_MTP 3728
+msm8930_fluid MACH_MSM8930_FLUID MSM8930_FLUID 3729
+ltu11 MACH_LTU11 LTU11 3730
+am1808_spawnco MACH_AM1808_SPAWNCO AM1808_SPAWNCO 3731
+flx6410 MACH_FLX6410 FLX6410 3732
+mx6q_qsb MACH_MX6Q_QSB MX6Q_QSB 3733
+mx53_plt424 MACH_MX53_PLT424 MX53_PLT424 3734
+jasmine MACH_JASMINE JASMINE 3735
+l138_owlboard_plus MACH_L138_OWLBOARD_PLUS L138_OWLBOARD_PLUS 3736
+wr21 MACH_WR21 WR21 3737
+peaboy MACH_PEABOY PEABOY 3739
+mx28_plato MACH_MX28_PLATO MX28_PLATO 3740
+kacom2 MACH_KACOM2 KACOM2 3741
+slco MACH_SLCO SLCO 3742
+imx51pico MACH_IMX51PICO IMX51PICO 3743
+glink1 MACH_GLINK1 GLINK1 3744
+diamond MACH_DIAMOND DIAMOND 3745
+d9000 MACH_D9000 D9000 3746
+w5300e01 MACH_W5300E01 W5300E01 3747
+im6000 MACH_IM6000 IM6000 3748
+mx51_fred51 MACH_MX51_FRED51 MX51_FRED51 3749
+stm32f2 MACH_STM32F2 STM32F2 3750
+ville MACH_VILLE VILLE 3751
+ptip_murnau MACH_PTIP_MURNAU PTIP_MURNAU 3752
+ptip_classic MACH_PTIP_CLASSIC PTIP_CLASSIC 3753
+mx53grb MACH_MX53GRB MX53GRB 3754
+gagarin MACH_GAGARIN GAGARIN 3755
+nas2big MACH_NAS2BIG NAS2BIG 3757
+superfemto MACH_SUPERFEMTO SUPERFEMTO 3758
+teufel MACH_TEUFEL TEUFEL 3759
+dinara MACH_DINARA DINARA 3760
+vanquish MACH_VANQUISH VANQUISH 3761
+zipabox1 MACH_ZIPABOX1 ZIPABOX1 3762
+u9540 MACH_U9540 U9540 3763
+jet MACH_JET JET 3764
smdk4412 MACH_SMDK4412 SMDK4412 3765
+elite MACH_ELITE ELITE 3766
+spear320_hmi MACH_SPEAR320_HMI SPEAR320_HMI 3767
+ontario MACH_ONTARIO ONTARIO 3768
+mx6q_sabrelite MACH_MX6Q_SABRELITE MX6Q_SABRELITE 3769
+vc200 MACH_VC200 VC200 3770
+msm7625a_ffa MACH_MSM7625A_FFA MSM7625A_FFA 3771
+msm7625a_surf MACH_MSM7625A_SURF MSM7625A_SURF 3772
+benthossbp MACH_BENTHOSSBP BENTHOSSBP 3773
+smdk5210 MACH_SMDK5210 SMDK5210 3774
+empq2300 MACH_EMPQ2300 EMPQ2300 3775
+minipos MACH_MINIPOS MINIPOS 3776
+omap5_sevm MACH_OMAP5_SEVM OMAP5_SEVM 3777
+shelter MACH_SHELTER SHELTER 3778
+omap3_devkit8500 MACH_OMAP3_DEVKIT8500 OMAP3_DEVKIT8500 3779
+edgetd MACH_EDGETD EDGETD 3780
+copperyard MACH_COPPERYARD COPPERYARD 3781
+edge MACH_EDGE EDGE 3782
+edge_u MACH_EDGE_U EDGE_U 3783
+edge_td MACH_EDGE_TD EDGE_TD 3784
+wdss MACH_WDSS WDSS 3785
+dl_pb25 MACH_DL_PB25 DL_PB25 3786
+dss11 MACH_DSS11 DSS11 3787
+cpa MACH_CPA CPA 3788
+aptp2000 MACH_APTP2000 APTP2000 3789
+marzen MACH_MARZEN MARZEN 3790
+st_turbine MACH_ST_TURBINE ST_TURBINE 3791
+gtl_it3300 MACH_GTL_IT3300 GTL_IT3300 3792
+mx6_mule MACH_MX6_MULE MX6_MULE 3793
+v7pxa_dt MACH_V7PXA_DT V7PXA_DT 3794
+v7mmp_dt MACH_V7MMP_DT V7MMP_DT 3795
+dragon7 MACH_DRAGON7 DRAGON7 3796
+krome MACH_KROME KROME 3797
+oratisdante MACH_ORATISDANTE ORATISDANTE 3798
+fathom MACH_FATHOM FATHOM 3799
+dns325 MACH_DNS325 DNS325 3800
+sarnen MACH_SARNEN SARNEN 3801
+ubisys_g1 MACH_UBISYS_G1 UBISYS_G1 3802
+mx53_pf1 MACH_MX53_PF1 MX53_PF1 3803
+asanti MACH_ASANTI ASANTI 3804
+volta MACH_VOLTA VOLTA 3805
+knight MACH_KNIGHT KNIGHT 3807
+beaglebone MACH_BEAGLEBONE BEAGLEBONE 3808
+becker MACH_BECKER BECKER 3809
+fc360 MACH_FC360 FC360 3810
+pmi2_xls MACH_PMI2_XLS PMI2_XLS 3811
+taranto MACH_TARANTO TARANTO 3812
+plutux MACH_PLUTUX PLUTUX 3813
+ipmp_medcom MACH_IPMP_MEDCOM IPMP_MEDCOM 3814
+absolut MACH_ABSOLUT ABSOLUT 3815
+awpb3 MACH_AWPB3 AWPB3 3816
+nfp32xx_dt MACH_NFP32XX_DT NFP32XX_DT 3817
+dl_pb53 MACH_DL_PB53 DL_PB53 3818
+acu_ii MACH_ACU_II ACU_II 3819
+avalon MACH_AVALON AVALON 3820
+sphinx MACH_SPHINX SPHINX 3821
+titan_t MACH_TITAN_T TITAN_T 3822
+harvest_boris MACH_HARVEST_BORIS HARVEST_BORIS 3823
+mach_msm7x30_m3s MACH_MACH_MSM7X30_M3S MACH_MSM7X30_M3S 3824
+smdk5250 MACH_SMDK5250 SMDK5250 3825
+imxt_lite MACH_IMXT_LITE IMXT_LITE 3826
+imxt_std MACH_IMXT_STD IMXT_STD 3827
+imxt_log MACH_IMXT_LOG IMXT_LOG 3828
+imxt_nav MACH_IMXT_NAV IMXT_NAV 3829
+imxt_full MACH_IMXT_FULL IMXT_FULL 3830
+ag09015 MACH_AG09015 AG09015 3831
+am3517_mt_ventoux MACH_AM3517_MT_VENTOUX AM3517_MT_VENTOUX 3832
+dp1arm9 MACH_DP1ARM9 DP1ARM9 3833
+picasso_m MACH_PICASSO_M PICASSO_M 3834
+video_gadget MACH_VIDEO_GADGET VIDEO_GADGET 3835
+mtt_om3x MACH_MTT_OM3X MTT_OM3X 3836
+mx6q_arm2 MACH_MX6Q_ARM2 MX6Q_ARM2 3837
+picosam9g45 MACH_PICOSAM9G45 PICOSAM9G45 3838
+vpm_dm365 MACH_VPM_DM365 VPM_DM365 3839
+bonfire MACH_BONFIRE BONFIRE 3840
+mt2p2d MACH_MT2P2D MT2P2D 3841
+sigpda01 MACH_SIGPDA01 SIGPDA01 3842
+cn27 MACH_CN27 CN27 3843
+mx25_cwtap MACH_MX25_CWTAP MX25_CWTAP 3844
+apf28 MACH_APF28 APF28 3845
+pelco_maxwell MACH_PELCO_MAXWELL PELCO_MAXWELL 3846
+ge_phoenix MACH_GE_PHOENIX GE_PHOENIX 3847
+empc_a500 MACH_EMPC_A500 EMPC_A500 3848
+ims_arm9 MACH_IMS_ARM9 IMS_ARM9 3849
+mini2416 MACH_MINI2416 MINI2416 3850
+mini2450 MACH_MINI2450 MINI2450 3851
+mini310 MACH_MINI310 MINI310 3852
+spear_hurricane MACH_SPEAR_HURRICANE SPEAR_HURRICANE 3853
+mt7208 MACH_MT7208 MT7208 3854
+lpc178x MACH_LPC178X LPC178X 3855
+farleys MACH_FARLEYS FARLEYS 3856
+efm32gg_dk3750 MACH_EFM32GG_DK3750 EFM32GG_DK3750 3857
+zeus_board MACH_ZEUS_BOARD ZEUS_BOARD 3858
+cc51 MACH_CC51 CC51 3859
+fxi_c210 MACH_FXI_C210 FXI_C210 3860
+msm8627_cdp MACH_MSM8627_CDP MSM8627_CDP 3861
+msm8627_mtp MACH_MSM8627_MTP MSM8627_MTP 3862
+armadillo800eva MACH_ARMADILLO800EVA ARMADILLO800EVA 3863
+primou MACH_PRIMOU PRIMOU 3864
+primoc MACH_PRIMOC PRIMOC 3865
+primoct MACH_PRIMOCT PRIMOCT 3866
+a9500 MACH_A9500 A9500 3867
+pluto MACH_PLUTO PLUTO 3869
+acfx100 MACH_ACFX100 ACFX100 3870
+msm8625_rumi3 MACH_MSM8625_RUMI3 MSM8625_RUMI3 3871
+valente MACH_VALENTE VALENTE 3872
+crfs_rfeye MACH_CRFS_RFEYE CRFS_RFEYE 3873
+rfeye MACH_RFEYE RFEYE 3874
+phidget_sbc3 MACH_PHIDGET_SBC3 PHIDGET_SBC3 3875
+tcw_mika MACH_TCW_MIKA TCW_MIKA 3876
+imx28_egf MACH_IMX28_EGF IMX28_EGF 3877
+valente_wx MACH_VALENTE_WX VALENTE_WX 3878
+huangshans MACH_HUANGSHANS HUANGSHANS 3879
+bosphorus1 MACH_BOSPHORUS1 BOSPHORUS1 3880
+prima MACH_PRIMA PRIMA 3881
+evita_ulk MACH_EVITA_ULK EVITA_ULK 3884
+merisc600 MACH_MERISC600 MERISC600 3885
+dolak MACH_DOLAK DOLAK 3886
+sbc53 MACH_SBC53 SBC53 3887
+elite_ulk MACH_ELITE_ULK ELITE_ULK 3888
+pov2 MACH_POV2 POV2 3889
+ipod_touch_2g MACH_IPOD_TOUCH_2G IPOD_TOUCH_2G 3890
+da850_pqab MACH_DA850_PQAB DA850_PQAB 3891
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 1f17bde52cd..7c756fb189f 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -109,7 +109,7 @@ struct eth_addr {
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static struct spi_board_info spi0_board_info[] __initdata = {
{
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 4643ff5107c..c56ddac85d6 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -105,7 +105,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2] = {
+static struct macb_platform_data __initdata eth_data[2] = {
{
/*
* The MDIO pullups on STK1000 are a bit too weak for
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 86fab77a5a0..27bd6fbe21c 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -50,7 +50,7 @@ struct eth_addr {
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1] = {
+static struct macb_platform_data __initdata eth_data[1] = {
{
.phy_mask = ~(1U << 1),
},
diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c
index da14fbdd4e8..9d1efd1cd42 100644
--- a/arch/avr32/boards/hammerhead/setup.c
+++ b/arch/avr32/boards/hammerhead/setup.c
@@ -102,7 +102,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1];
+static struct macb_platform_data __initdata eth_data[1];
/*
* The next two functions should go away as the boot loader is
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index e61bc948f95..ed137e33579 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -52,7 +52,7 @@ struct eth_addr {
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static int ads7846_get_pendown_state_PB26(void)
{
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
index c4da5cba2db..05358aa5ef7 100644
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -86,7 +86,7 @@ struct eth_addr {
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static struct spi_eeprom eeprom_25lc010 = {
.name = "25lc010",
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 7fbf0dcb9af..402a7bb7266 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1067,7 +1067,7 @@ void __init at32_setup_serial_console(unsigned int usart_id)
* -------------------------------------------------------------------- */
#ifdef CONFIG_CPU_AT32AP7000
-static struct eth_platform_data macb0_data;
+static struct macb_platform_data macb0_data;
static struct resource macb0_resource[] = {
PBMEM(0xfff01800),
IRQ(25),
@@ -1076,7 +1076,7 @@ DEFINE_DEV_DATA(macb, 0);
DEV_CLK(hclk, macb0, hsb, 8);
DEV_CLK(pclk, macb0, pbb, 6);
-static struct eth_platform_data macb1_data;
+static struct macb_platform_data macb1_data;
static struct resource macb1_resource[] = {
PBMEM(0xfff01c00),
IRQ(26),
@@ -1086,7 +1086,7 @@ DEV_CLK(hclk, macb1, hsb, 9);
DEV_CLK(pclk, macb1, pbb, 7);
struct platform_device *__init
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+at32_add_device_eth(unsigned int id, struct macb_platform_data *data)
{
struct platform_device *pdev;
u32 pin_mask;
@@ -1163,7 +1163,7 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
return NULL;
}
- memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+ memcpy(pdev->dev.platform_data, data, sizeof(struct macb_platform_data));
platform_device_register(pdev);
return pdev;
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 5d7ffca7d69..67b111ce332 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -6,6 +6,7 @@
#include <linux/types.h>
#include <linux/serial.h>
+#include <linux/platform_data/macb.h>
#define GPIO_PIN_NONE (-1)
@@ -42,12 +43,8 @@ struct atmel_uart_data {
void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
struct platform_device *at32_add_device_usart(unsigned int id);
-struct eth_platform_data {
- u32 phy_mask;
- u8 is_rmii;
-};
struct platform_device *
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
+at32_add_device_eth(unsigned int id, struct macb_platform_data *data);
struct spi_board_info;
struct platform_device *
diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h
index 6073b187528..5a274af31b2 100644
--- a/arch/ia64/include/asm/cputime.h
+++ b/arch/ia64/include/asm/cputime.h
@@ -60,6 +60,7 @@ typedef u64 cputime64_t;
*/
#define cputime_to_usecs(__ct) ((__ct) / NSEC_PER_USEC)
#define usecs_to_cputime(__usecs) ((__usecs) * NSEC_PER_USEC)
+#define usecs_to_cputime64(__usecs) usecs_to_cputime(__usecs)
/*
* Convert cputime <-> seconds
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
index 1cf20bdfbec..98b7c4b49c9 100644
--- a/arch/powerpc/include/asm/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
@@ -150,6 +150,8 @@ static inline cputime_t usecs_to_cputime(const unsigned long us)
return ct;
}
+#define usecs_to_cputime64(us) usecs_to_cputime(us)
+
/*
* Convert cputime <-> seconds
*/
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index d4df013ad77..69c7377d207 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -381,39 +381,6 @@ static inline bool kvmppc_critical_section(struct kvm_vcpu *vcpu)
}
#endif
-static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
- unsigned long pte_index)
-{
- unsigned long rb, va_low;
-
- rb = (v & ~0x7fUL) << 16; /* AVA field */
- va_low = pte_index >> 3;
- if (v & HPTE_V_SECONDARY)
- va_low = ~va_low;
- /* xor vsid from AVA */
- if (!(v & HPTE_V_1TB_SEG))
- va_low ^= v >> 12;
- else
- va_low ^= v >> 24;
- va_low &= 0x7ff;
- if (v & HPTE_V_LARGE) {
- rb |= 1; /* L field */
- if (cpu_has_feature(CPU_FTR_ARCH_206) &&
- (r & 0xff000)) {
- /* non-16MB large page, must be 64k */
- /* (masks depend on page size) */
- rb |= 0x1000; /* page encoding in LP field */
- rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
- rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */
- }
- } else {
- /* 4kB page */
- rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */
- }
- rb |= (v >> 54) & 0x300; /* B field */
- return rb;
-}
-
/* Magic register values loaded into r3 and r4 before the 'sc' assembly
* instruction for the OSI hypercalls */
#define OSI_SC_MAGIC_R3 0x113724FA
diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h
index e43fe42b987..d0ac94f98f9 100644
--- a/arch/powerpc/include/asm/kvm_book3s_64.h
+++ b/arch/powerpc/include/asm/kvm_book3s_64.h
@@ -29,4 +29,37 @@ static inline struct kvmppc_book3s_shadow_vcpu *to_svcpu(struct kvm_vcpu *vcpu)
#define SPAPR_TCE_SHIFT 12
+static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
+ unsigned long pte_index)
+{
+ unsigned long rb, va_low;
+
+ rb = (v & ~0x7fUL) << 16; /* AVA field */
+ va_low = pte_index >> 3;
+ if (v & HPTE_V_SECONDARY)
+ va_low = ~va_low;
+ /* xor vsid from AVA */
+ if (!(v & HPTE_V_1TB_SEG))
+ va_low ^= v >> 12;
+ else
+ va_low ^= v >> 24;
+ va_low &= 0x7ff;
+ if (v & HPTE_V_LARGE) {
+ rb |= 1; /* L field */
+ if (cpu_has_feature(CPU_FTR_ARCH_206) &&
+ (r & 0xff000)) {
+ /* non-16MB large page, must be 64k */
+ /* (masks depend on page size) */
+ rb |= 0x1000; /* page encoding in LP field */
+ rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */
+ rb |= (va_low & 0xfe); /* AVAL field (P7 doesn't seem to care) */
+ }
+ } else {
+ /* 4kB page */
+ rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */
+ }
+ rb |= (v >> 54) & 0x300; /* B field */
+ return rb;
+}
+
#endif /* __ASM_KVM_BOOK3S_64_H__ */
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 0cb137a9b03..336983da9e7 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -538,7 +538,7 @@ static void kvmppc_start_thread(struct kvm_vcpu *vcpu)
tpaca->kvm_hstate.napping = 0;
vcpu->cpu = vc->pcpu;
smp_wmb();
-#ifdef CONFIG_PPC_ICP_NATIVE
+#if defined(CONFIG_PPC_ICP_NATIVE) && defined(CONFIG_SMP)
if (vcpu->arch.ptid) {
tpaca->cpu_start = 0x80;
wmb();
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 3c791e1eb67..e2cfb9e1e20 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -658,10 +658,12 @@ program_interrupt:
ulong cmd = kvmppc_get_gpr(vcpu, 3);
int i;
+#ifdef CONFIG_KVM_BOOK3S_64_PR
if (kvmppc_h_pr(vcpu, cmd) == EMULATE_DONE) {
r = RESUME_GUEST;
break;
}
+#endif
run->papr_hcall.nr = cmd;
for (i = 0; i < 9; ++i) {
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index 26d20903f2b..8c0d45a6faf 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -15,6 +15,7 @@
#include <linux/kvm_host.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/export.h>
#include <asm/reg.h>
#include <asm/cputable.h>
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 08143487829..b9acaaa175d 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -87,6 +87,8 @@ usecs_to_cputime(const unsigned int m)
return (cputime_t) m * 4096;
}
+#define usecs_to_cputime64(m) usecs_to_cputime(m)
+
/*
* Convert cputime to milliseconds and back.
*/
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index 6efc18b5e60..bd58b72454c 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -88,7 +88,7 @@ static ssize_t hwsampler_write(struct file *file, char const __user *buf,
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
if (oprofile_started)
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index ec8c84c14b1..895e337c79b 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -50,9 +50,9 @@ static struct platform_device heartbeat_device = {
#define GBECONT 0xffc10100
#define GBECONT_RMII1 BIT(17)
#define GBECONT_RMII0 BIT(16)
-static void sh7757_eth_set_mdio_gate(unsigned long addr)
+static void sh7757_eth_set_mdio_gate(void *addr)
{
- if ((addr & 0x00000fff) < 0x0800)
+ if (((unsigned long)addr & 0x00000fff) < 0x0800)
writel(readl(GBECONT) | GBECONT_RMII0, GBECONT);
else
writel(readl(GBECONT) | GBECONT_RMII1, GBECONT);
@@ -116,9 +116,9 @@ static struct platform_device sh7757_eth1_device = {
},
};
-static void sh7757_eth_giga_set_mdio_gate(unsigned long addr)
+static void sh7757_eth_giga_set_mdio_gate(void *addr)
{
- if ((addr & 0x00000fff) < 0x0800) {
+ if (((unsigned long)addr & 0x00000fff) < 0x0800) {
gpio_set_value(GPIO_PTT4, 1);
writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT);
} else {
@@ -210,8 +210,12 @@ static struct resource sh_mmcif_resources[] = {
};
static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
- .chan_priv_tx = SHDMA_SLAVE_MMCIF_TX,
- .chan_priv_rx = SHDMA_SLAVE_MMCIF_RX,
+ .chan_priv_tx = {
+ .slave_id = SHDMA_SLAVE_MMCIF_TX,
+ },
+ .chan_priv_rx = {
+ .slave_id = SHDMA_SLAVE_MMCIF_RX,
+ }
};
static struct sh_mmcif_plat_data sh_mmcif_plat = {
diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c
index b4c2d2b946d..e4dd5d5a111 100644
--- a/arch/sh/oprofile/common.c
+++ b/arch/sh/oprofile/common.c
@@ -49,7 +49,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
return oprofile_perf_init(ops);
}
-void __exit oprofile_arch_exit(void)
+void oprofile_arch_exit(void)
{
oprofile_perf_exit();
kfree(sh_pmu_op_name);
@@ -60,5 +60,5 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
ops->backtrace = sh_backtrace;
return -ENODEV;
}
-void __exit oprofile_arch_exit(void) {}
+void oprofile_arch_exit(void) {}
#endif /* CONFIG_HW_PERF_EVENTS */
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index b272cda35a0..af5755d20fb 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -849,10 +849,10 @@ static int pci_sun4v_msiq_build_irq(struct pci_pbm_info *pbm,
if (!irq)
return -ENOMEM;
- if (pci_sun4v_msiq_setstate(pbm->devhandle, msiqid, HV_MSIQSTATE_IDLE))
- return -EINVAL;
if (pci_sun4v_msiq_setvalid(pbm->devhandle, msiqid, HV_MSIQ_VALID))
return -EINVAL;
+ if (pci_sun4v_msiq_setstate(pbm->devhandle, msiqid, HV_MSIQSTATE_IDLE))
+ return -EINVAL;
return irq;
}
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 8d601b18bf9..121f1be4da1 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -1169,7 +1169,7 @@ again:
*/
c = &unconstrained;
} else if (intel_try_alt_er(event, orig_idx)) {
- raw_spin_unlock(&era->lock);
+ raw_spin_unlock_irqrestore(&era->lock, flags);
goto again;
}
raw_spin_unlock_irqrestore(&era->lock, flags);
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index 3b97a80ce32..c99f9ed013d 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -116,16 +116,16 @@ void show_registers(struct pt_regs *regs)
for (i = 0; i < code_len; i++, ip++) {
if (ip < (u8 *)PAGE_OFFSET ||
probe_kernel_address(ip, c)) {
- printk(" Bad EIP value.");
+ printk(KERN_CONT " Bad EIP value.");
break;
}
if (ip == (u8 *)regs->ip)
- printk("<%02x> ", c);
+ printk(KERN_CONT "<%02x> ", c);
else
- printk("%02x ", c);
+ printk(KERN_CONT "%02x ", c);
}
}
- printk("\n");
+ printk(KERN_CONT "\n");
}
int is_valid_bugaddr(unsigned long ip)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 19853ad8afc..6d728d9284b 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -284,16 +284,16 @@ void show_registers(struct pt_regs *regs)
for (i = 0; i < code_len; i++, ip++) {
if (ip < (u8 *)PAGE_OFFSET ||
probe_kernel_address(ip, c)) {
- printk(" Bad RIP value.");
+ printk(KERN_CONT " Bad RIP value.");
break;
}
if (ip == (u8 *)regs->ip)
- printk("<%02x> ", c);
+ printk(KERN_CONT "<%02x> ", c);
else
- printk("%02x ", c);
+ printk(KERN_CONT "%02x ", c);
}
}
- printk("\n");
+ printk(KERN_CONT "\n");
}
int is_valid_bugaddr(unsigned long ip)
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 76e3f1cd036..405f2620392 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -338,11 +338,15 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
return HRTIMER_NORESTART;
}
-static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
+static void create_pit_timer(struct kvm *kvm, u32 val, int is_period)
{
+ struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
struct kvm_timer *pt = &ps->pit_timer;
s64 interval;
+ if (!irqchip_in_kernel(kvm))
+ return;
+
interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ);
pr_debug("create pit timer, interval is %llu nsec\n", interval);
@@ -394,13 +398,13 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
/* FIXME: enhance mode 4 precision */
case 4:
if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)) {
- create_pit_timer(ps, val, 0);
+ create_pit_timer(kvm, val, 0);
}
break;
case 2:
case 3:
if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)){
- create_pit_timer(ps, val, 1);
+ create_pit_timer(kvm, val, 1);
}
break;
default:
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c38efd7b792..4c938da2ba0 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -602,7 +602,6 @@ static void update_cpuid(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
struct kvm_lapic *apic = vcpu->arch.apic;
- u32 timer_mode_mask;
best = kvm_find_cpuid_entry(vcpu, 1, 0);
if (!best)
@@ -615,15 +614,12 @@ static void update_cpuid(struct kvm_vcpu *vcpu)
best->ecx |= bit(X86_FEATURE_OSXSAVE);
}
- if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
- best->function == 0x1) {
- best->ecx |= bit(X86_FEATURE_TSC_DEADLINE_TIMER);
- timer_mode_mask = 3 << 17;
- } else
- timer_mode_mask = 1 << 17;
-
- if (apic)
- apic->lapic_timer.timer_mode_mask = timer_mode_mask;
+ if (apic) {
+ if (best->ecx & bit(X86_FEATURE_TSC_DEADLINE_TIMER))
+ apic->lapic_timer.timer_mode_mask = 3 << 17;
+ else
+ apic->lapic_timer.timer_mode_mask = 1 << 17;
+ }
}
int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
@@ -2135,6 +2131,9 @@ int kvm_dev_ioctl_check_extension(long ext)
case KVM_CAP_TSC_CONTROL:
r = kvm_has_tsc_control;
break;
+ case KVM_CAP_TSC_DEADLINE_TIMER:
+ r = boot_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER);
+ break;
default:
r = 0;
break;
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index bfab3fa10ed..7b65f752c5f 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -568,8 +568,8 @@ cond_branch: f_offset = addrs[i + filter[i].jf] - addrs[i];
break;
}
if (filter[i].jt != 0) {
- if (filter[i].jf)
- t_offset += is_near(f_offset) ? 2 : 6;
+ if (filter[i].jf && f_offset)
+ t_offset += is_near(f_offset) ? 2 : 5;
EMIT_COND_JMP(t_op, t_offset);
if (filter[i].jf)
EMIT_JMP(f_offset);
diff --git a/block/blk-map.c b/block/blk-map.c
index 164cd005970..623e1cd4cff 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -311,7 +311,7 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
if (IS_ERR(bio))
return PTR_ERR(bio);
- if (rq_data_dir(rq) == WRITE)
+ if (!reading)
bio->bi_rw |= REQ_WRITE;
if (do_copy)
diff --git a/block/blk-tag.c b/block/blk-tag.c
index e74d6d13838..4af6f5cc116 100644
--- a/block/blk-tag.c
+++ b/block/blk-tag.c
@@ -282,18 +282,9 @@ EXPORT_SYMBOL(blk_queue_resize_tags);
void blk_queue_end_tag(struct request_queue *q, struct request *rq)
{
struct blk_queue_tag *bqt = q->queue_tags;
- int tag = rq->tag;
+ unsigned tag = rq->tag; /* negative tags invalid */
- BUG_ON(tag == -1);
-
- if (unlikely(tag >= bqt->max_depth)) {
- /*
- * This can happen after tag depth has been reduced.
- * But tag shouldn't be larger than real_max_depth.
- */
- WARN_ON(tag >= bqt->real_max_depth);
- return;
- }
+ BUG_ON(tag >= bqt->real_max_depth);
list_del_init(&rq->queuelist);
rq->cmd_flags &= ~REQ_QUEUED;
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 4c12869fcf7..3548705b04e 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1655,6 +1655,8 @@ cfq_merged_requests(struct request_queue *q, struct request *rq,
struct request *next)
{
struct cfq_queue *cfqq = RQ_CFQQ(rq);
+ struct cfq_data *cfqd = q->elevator->elevator_data;
+
/*
* reposition in fifo if next is older than rq
*/
@@ -1669,6 +1671,16 @@ cfq_merged_requests(struct request_queue *q, struct request *rq,
cfq_remove_request(next);
cfq_blkiocg_update_io_merged_stats(&(RQ_CFQG(rq))->blkg,
rq_data_dir(next), rq_is_sync(next));
+
+ cfqq = RQ_CFQQ(next);
+ /*
+ * all requests of this queue are merged to other queues, delete it
+ * from the service tree. If it's the active_queue,
+ * cfq_dispatch_requests() will choose to expire it or do idle
+ */
+ if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY_ROOT(&cfqq->sort_list) &&
+ cfqq != cfqd->active_queue)
+ cfq_del_cfqq_rr(cfqd, cfqq);
}
static int cfq_allow_merge(struct request_queue *q, struct request *rq,
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 6bdedd7cca2..cf047c406d9 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -820,7 +820,7 @@ config PATA_PLATFORM
config PATA_OF_PLATFORM
tristate "OpenFirmware platform device PATA support"
- depends on PATA_PLATFORM && OF
+ depends on PATA_PLATFORM && OF && OF_IRQ
help
This option enables support for generic directly connected ATA
devices commonly found on embedded systems with OpenFirmware
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index a76f24a8e5d..5249e6d918a 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -360,7 +360,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
ap->flags |= ATA_FLAG_SLAVE_POSS;
ap->pio_mask = ATA_PIO4;
- if (!irq) {
+ if (!gpio_is_valid(irq)) {
ap->flags |= ATA_FLAG_PIO_POLLING;
ata_port_desc(ap, "no IRQ, using PIO polling");
}
@@ -414,8 +414,8 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
host->private_data = info;
- ret = ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
- irq ? ata_sff_interrupt : NULL,
+ return ata_host_activate(host, gpio_is_valid(irq) ? gpio_to_irq(irq) : 0,
+ gpio_is_valid(irq) ? ata_sff_interrupt : NULL,
irq_flags, &pata_at91_sht);
if (!ret)
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index c2917ffad2c..34767a6d7f4 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -139,6 +139,8 @@
#define IPMI_WDOG_SET_TIMER 0x24
#define IPMI_WDOG_GET_TIMER 0x25
+#define IPMI_WDOG_TIMER_NOT_INIT_RESP 0x80
+
/* These are here until the real ones get into the watchdog.h interface. */
#ifndef WDIOC_GETTIMEOUT
#define WDIOC_GETTIMEOUT _IOW(WATCHDOG_IOCTL_BASE, 20, int)
@@ -596,6 +598,7 @@ static int ipmi_heartbeat(void)
struct kernel_ipmi_msg msg;
int rv;
struct ipmi_system_interface_addr addr;
+ int timeout_retries = 0;
if (ipmi_ignore_heartbeat)
return 0;
@@ -616,6 +619,7 @@ static int ipmi_heartbeat(void)
mutex_lock(&heartbeat_lock);
+restart:
atomic_set(&heartbeat_tofree, 2);
/*
@@ -653,7 +657,33 @@ static int ipmi_heartbeat(void)
/* Wait for the heartbeat to be sent. */
wait_for_completion(&heartbeat_wait);
- if (heartbeat_recv_msg.msg.data[0] != 0) {
+ if (heartbeat_recv_msg.msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) {
+ timeout_retries++;
+ if (timeout_retries > 3) {
+ printk(KERN_ERR PFX ": Unable to restore the IPMI"
+ " watchdog's settings, giving up.\n");
+ rv = -EIO;
+ goto out_unlock;
+ }
+
+ /*
+ * The timer was not initialized, that means the BMC was
+ * probably reset and lost the watchdog information. Attempt
+ * to restore the timer's info. Note that we still hold
+ * the heartbeat lock, to keep a heartbeat from happening
+ * in this process, so must say no heartbeat to avoid a
+ * deadlock on this mutex.
+ */
+ rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB);
+ if (rv) {
+ printk(KERN_ERR PFX ": Unable to send the command to"
+ " set the watchdog's settings, giving up.\n");
+ goto out_unlock;
+ }
+
+ /* We might need a new heartbeat, so do it now */
+ goto restart;
+ } else if (heartbeat_recv_msg.msg.data[0] != 0) {
/*
* Got an error in the heartbeat response. It was already
* reported in ipmi_wdog_msg_handler, but we should return
@@ -662,6 +692,7 @@ static int ipmi_heartbeat(void)
rv = -EINVAL;
}
+out_unlock:
mutex_unlock(&heartbeat_lock);
return rv;
@@ -922,11 +953,15 @@ static struct miscdevice ipmi_wdog_miscdev = {
static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg,
void *handler_data)
{
- if (msg->msg.data[0] != 0) {
+ if (msg->msg.cmd == IPMI_WDOG_RESET_TIMER &&
+ msg->msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP)
+ printk(KERN_INFO PFX "response: The IPMI controller appears"
+ " to have been reset, will attempt to reinitialize"
+ " the watchdog timer\n");
+ else if (msg->msg.data[0] != 0)
printk(KERN_ERR PFX "response: Error %x on cmd %x\n",
msg->msg.data[0],
msg->msg.cmd);
- }
ipmi_free_recv_msg(msg);
}
diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c
index 59feefe0e3e..fb6b6d28b60 100644
--- a/drivers/clocksource/clksrc-dbx500-prcmu.c
+++ b/drivers/clocksource/clksrc-dbx500-prcmu.c
@@ -58,25 +58,15 @@ static struct clocksource clocksource_dbx500_prcmu = {
};
#ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
-static DEFINE_CLOCK_DATA(cd);
-unsigned long long notrace sched_clock(void)
+static u32 notrace dbx500_prcmu_sched_clock_read(void)
{
- u32 cyc;
-
if (unlikely(!clksrc_dbx500_timer_base))
return 0;
- cyc = clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu);
-
- return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+ return clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu);
}
-static void notrace clksrc_dbx500_prcmu_update_sched_clock(void)
-{
- u32 cyc = clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu);
- update_sched_clock(&cd, cyc, (u32)~0);
-}
#endif
void __init clksrc_dbx500_prcmu_init(void __iomem *base)
@@ -97,7 +87,7 @@ void __init clksrc_dbx500_prcmu_init(void __iomem *base)
clksrc_dbx500_timer_base + PRCMU_TIMER_REF);
}
#ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
- init_sched_clock(&cd, clksrc_dbx500_prcmu_update_sched_clock,
+ setup_sched_clock(dbx500_prcmu_sched_clock_read,
32, RATE_32K);
#endif
clocksource_calc_mult_shift(&clocksource_dbx500_prcmu,
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index ab8f469f5cf..5a99bb3f255 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -124,7 +124,7 @@ config MV_XOR
config MX3_IPU
bool "MX3x Image Processing Unit support"
- depends on ARCH_MX3
+ depends on SOC_IMX31 || SOC_IMX35
select DMA_ENGINE
default y
help
@@ -216,7 +216,7 @@ config PCH_DMA
config IMX_SDMA
tristate "i.MX SDMA support"
- depends on ARCH_MX25 || ARCH_MX3 || ARCH_MX5
+ depends on ARCH_MX25 || SOC_IMX31 || SOC_IMX35 || ARCH_MX5
select DMA_ENGINE
help
Support the i.MX SDMA engine. This engine is integrated into
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 571041477ab..a626e15799a 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -19,6 +19,7 @@
#include <linux/amba/pl330.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
+#include <linux/of.h>
#define NR_DEFAULT_DESC 16
@@ -116,6 +117,9 @@ struct dma_pl330_desc {
struct dma_pl330_chan *pchan;
};
+/* forward declaration */
+static struct amba_driver pl330_driver;
+
static inline struct dma_pl330_chan *
to_pchan(struct dma_chan *ch)
{
@@ -267,6 +271,32 @@ static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
tasklet_schedule(&pch->task);
}
+bool pl330_filter(struct dma_chan *chan, void *param)
+{
+ u8 *peri_id;
+
+ if (chan->device->dev->driver != &pl330_driver.drv)
+ return false;
+
+#ifdef CONFIG_OF
+ if (chan->device->dev->of_node) {
+ const __be32 *prop_value;
+ phandle phandle;
+ struct device_node *node;
+
+ prop_value = ((struct property *)param)->value;
+ phandle = be32_to_cpup(prop_value++);
+ node = of_find_node_by_phandle(phandle);
+ return ((chan->private == node) &&
+ (chan->chan_id == be32_to_cpup(prop_value)));
+ }
+#endif
+
+ peri_id = chan->private;
+ return *peri_id == (unsigned)param;
+}
+EXPORT_SYMBOL(pl330_filter);
+
static int pl330_alloc_chan_resources(struct dma_chan *chan)
{
struct dma_pl330_chan *pch = to_pchan(chan);
@@ -497,7 +527,7 @@ pluck_desc(struct dma_pl330_dmac *pdmac)
static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
{
struct dma_pl330_dmac *pdmac = pch->dmac;
- struct dma_pl330_peri *peri = pch->chan.private;
+ u8 *peri_id = pch->chan.private;
struct dma_pl330_desc *desc;
/* Pluck one desc from the pool of DMAC */
@@ -522,13 +552,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
desc->txd.cookie = 0;
async_tx_ack(&desc->txd);
- if (peri) {
- desc->req.rqtype = peri->rqtype;
- desc->req.peri = pch->chan.chan_id;
- } else {
- desc->req.rqtype = MEMTOMEM;
- desc->req.peri = 0;
- }
+ desc->req.peri = peri_id ? pch->chan.chan_id : 0;
dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
@@ -615,12 +639,14 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
case DMA_TO_DEVICE:
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 0;
+ desc->req.rqtype = MEMTODEV;
src = dma_addr;
dst = pch->fifo_addr;
break;
case DMA_FROM_DEVICE:
desc->rqcfg.src_inc = 0;
desc->rqcfg.dst_inc = 1;
+ desc->req.rqtype = DEVTOMEM;
src = pch->fifo_addr;
dst = dma_addr;
break;
@@ -646,16 +672,12 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
{
struct dma_pl330_desc *desc;
struct dma_pl330_chan *pch = to_pchan(chan);
- struct dma_pl330_peri *peri = chan->private;
struct pl330_info *pi;
int burst;
if (unlikely(!pch || !len))
return NULL;
- if (peri && peri->rqtype != MEMTOMEM)
- return NULL;
-
pi = &pch->dmac->pif;
desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
@@ -664,6 +686,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 1;
+ desc->req.rqtype = MEMTOMEM;
/* Select max possible burst size */
burst = pi->pcfg.data_bus_width / 8;
@@ -692,25 +715,14 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
{
struct dma_pl330_desc *first, *desc = NULL;
struct dma_pl330_chan *pch = to_pchan(chan);
- struct dma_pl330_peri *peri = chan->private;
struct scatterlist *sg;
unsigned long flags;
int i;
dma_addr_t addr;
- if (unlikely(!pch || !sgl || !sg_len || !peri))
+ if (unlikely(!pch || !sgl || !sg_len))
return NULL;
- /* Make sure the direction is consistent */
- if ((direction == DMA_TO_DEVICE &&
- peri->rqtype != MEMTODEV) ||
- (direction == DMA_FROM_DEVICE &&
- peri->rqtype != DEVTOMEM)) {
- dev_err(pch->dmac->pif.dev, "%s:%d Invalid Direction\n",
- __func__, __LINE__);
- return NULL;
- }
-
addr = pch->fifo_addr;
first = NULL;
@@ -750,11 +762,13 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
if (direction == DMA_TO_DEVICE) {
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 0;
+ desc->req.rqtype = MEMTODEV;
fill_px(&desc->px,
addr, sg_dma_address(sg), sg_dma_len(sg));
} else {
desc->rqcfg.src_inc = 0;
desc->rqcfg.dst_inc = 1;
+ desc->req.rqtype = DEVTOMEM;
fill_px(&desc->px,
sg_dma_address(sg), addr, sg_dma_len(sg));
}
@@ -856,32 +870,16 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
INIT_LIST_HEAD(&pd->channels);
/* Initialize channel parameters */
- num_chan = max(pdat ? pdat->nr_valid_peri : 0, (u8)pi->pcfg.num_chan);
+ num_chan = max(pdat ? pdat->nr_valid_peri : (u8)pi->pcfg.num_peri,
+ (u8)pi->pcfg.num_chan);
pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
for (i = 0; i < num_chan; i++) {
pch = &pdmac->peripherals[i];
- if (pdat) {
- struct dma_pl330_peri *peri = &pdat->peri[i];
-
- switch (peri->rqtype) {
- case MEMTOMEM:
- dma_cap_set(DMA_MEMCPY, pd->cap_mask);
- break;
- case MEMTODEV:
- case DEVTOMEM:
- dma_cap_set(DMA_SLAVE, pd->cap_mask);
- dma_cap_set(DMA_CYCLIC, pd->cap_mask);
- break;
- default:
- dev_err(&adev->dev, "DEVTODEV Not Supported\n");
- continue;
- }
- pch->chan.private = peri;
- } else {
- dma_cap_set(DMA_MEMCPY, pd->cap_mask);
- pch->chan.private = NULL;
- }
+ if (!adev->dev.of_node)
+ pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
+ else
+ pch->chan.private = adev->dev.of_node;
INIT_LIST_HEAD(&pch->work_list);
spin_lock_init(&pch->lock);
@@ -894,6 +892,15 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
}
pd->dev = &adev->dev;
+ if (pdat) {
+ pd->cap_mask = pdat->cap_mask;
+ } else {
+ dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+ if (pi->pcfg.num_peri) {
+ dma_cap_set(DMA_SLAVE, pd->cap_mask);
+ dma_cap_set(DMA_CYCLIC, pd->cap_mask);
+ }
+ }
pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
pd->device_free_chan_resources = pl330_free_chan_resources;
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 86625185271..6b4d23fd158 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -24,6 +24,9 @@
#include <linux/interrupt.h>
#include <linux/sysdev.h>
#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
#include <asm/irq.h>
@@ -2374,6 +2377,63 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = {
#endif
};
+#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF)
+static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np,
+ const void *gpio_spec, u32 *flags)
+{
+ const __be32 *gpio = gpio_spec;
+ const u32 n = be32_to_cpup(gpio);
+ unsigned int pin = gc->base + be32_to_cpu(gpio[0]);
+
+ if (WARN_ON(gc->of_gpio_n_cells < 4))
+ return -EINVAL;
+
+ if (n > gc->ngpio)
+ return -EINVAL;
+
+ if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1]))))
+ pr_warn("gpio_xlate: failed to set pin function\n");
+ if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2])))
+ pr_warn("gpio_xlate: failed to set pin pull up/down\n");
+ if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3])))
+ pr_warn("gpio_xlate: failed to set pin drive strength\n");
+
+ return n;
+}
+
+static const struct of_device_id exynos4_gpio_dt_match[] __initdata = {
+ { .compatible = "samsung,exynos4-gpio", },
+ {}
+};
+
+static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ struct gpio_chip *gc = &chip->chip;
+ u64 address;
+
+ if (!of_have_populated_dt())
+ return;
+
+ address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
+ gc->of_node = of_find_matching_node_by_address(NULL,
+ exynos4_gpio_dt_match, address);
+ if (!gc->of_node) {
+ pr_info("gpio: device tree node not found for gpio controller"
+ " with base address %08llx\n", address);
+ return;
+ }
+ gc->of_gpio_n_cells = 4;
+ gc->of_xlate = exynos4_gpio_xlate;
+}
+#elif defined(CONFIG_ARCH_EXYNOS4)
+static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ return;
+}
+#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */
+
/* TODO: cleanup soc_is_* */
static __init int samsung_gpiolib_init(void)
{
@@ -2455,6 +2515,10 @@ static __init int samsung_gpiolib_init(void)
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+#ifdef CONFIG_CPU_EXYNOS4210
+ exynos4_gpiolib_attach_ofnode(chip,
+ EXYNOS4_PA_GPIO1, i * 0x20);
+#endif
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
@@ -2467,6 +2531,10 @@ static __init int samsung_gpiolib_init(void)
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+#ifdef CONFIG_CPU_EXYNOS4210
+ exynos4_gpiolib_attach_ofnode(chip,
+ EXYNOS4_PA_GPIO2, i * 0x20);
+#endif
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
@@ -2479,6 +2547,10 @@ static __init int samsung_gpiolib_init(void)
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+#ifdef CONFIG_CPU_EXYNOS4210
+ exynos4_gpiolib_attach_ofnode(chip,
+ EXYNOS4_PA_GPIO3, i * 0x20);
+#endif
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index c681dc149d2..b9da8900ae4 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -756,9 +756,9 @@ intel_enable_semaphores(struct drm_device *dev)
if (i915_semaphores >= 0)
return i915_semaphores;
- /* Enable semaphores on SNB when IO remapping is off */
+ /* Disable semaphores on SNB */
if (INTEL_INFO(dev)->gen == 6)
- return !intel_iommu_enabled;
+ return 0;
return 1;
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d809b038ca8..daa5743ccbd 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7922,13 +7922,11 @@ static bool intel_enable_rc6(struct drm_device *dev)
return 0;
/*
- * Enable rc6 on Sandybridge if DMA remapping is disabled
+ * Disable rc6 on Sandybridge
*/
if (INTEL_INFO(dev)->gen == 6) {
- DRM_DEBUG_DRIVER("Sandybridge: intel_iommu_enabled %s -- RC6 %sabled\n",
- intel_iommu_enabled ? "true" : "false",
- !intel_iommu_enabled ? "en" : "dis");
- return !intel_iommu_enabled;
+ DRM_DEBUG_DRIVER("Sandybridge: RC6 disabled\n");
+ return 0;
}
DRM_DEBUG_DRIVER("RC6 enabled\n");
return 1;
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 5e00d1670aa..92c9628c572 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3276,6 +3276,18 @@ int evergreen_init(struct radeon_device *rdev)
rdev->accel_working = false;
}
}
+
+ /* Don't start up if the MC ucode is missing on BTC parts.
+ * The default clocks and voltages before the MC ucode
+ * is loaded are not suffient for advanced operations.
+ */
+ if (ASIC_IS_DCE5(rdev)) {
+ if (!rdev->mc_fw && !(rdev->flags & RADEON_IS_IGP)) {
+ DRM_ERROR("radeon: MC ucode required for NI+.\n");
+ return -EINVAL;
+ }
+ }
+
return 0;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 8cca91a93bd..dc279706ca7 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -390,6 +390,11 @@ extern int vmw_context_check(struct vmw_private *dev_priv,
struct ttm_object_file *tfile,
int id,
struct vmw_resource **p_res);
+extern int vmw_user_lookup_handle(struct vmw_private *dev_priv,
+ struct ttm_object_file *tfile,
+ uint32_t handle,
+ struct vmw_surface **out_surf,
+ struct vmw_dma_buffer **out_buf);
extern void vmw_surface_res_free(struct vmw_resource *res);
extern int vmw_surface_init(struct vmw_private *dev_priv,
struct vmw_surface *srf,
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
index 03bbc2a6f9a..a0c2f12b1e1 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
@@ -33,6 +33,7 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv)
{
__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
uint32_t fifo_min, hwversion;
+ const struct vmw_fifo_state *fifo = &dev_priv->fifo;
if (!(dev_priv->capabilities & SVGA_CAP_EXTENDED_FIFO))
return false;
@@ -41,7 +42,12 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv)
if (fifo_min <= SVGA_FIFO_3D_HWVERSION * sizeof(unsigned int))
return false;
- hwversion = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION);
+ hwversion = ioread32(fifo_mem +
+ ((fifo->capabilities &
+ SVGA_FIFO_CAP_3D_HWVERSION_REVISED) ?
+ SVGA_FIFO_3D_HWVERSION_REVISED :
+ SVGA_FIFO_3D_HWVERSION));
+
if (hwversion == 0)
return false;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
index 5ff561d4e0b..66917c6c381 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -58,8 +58,14 @@ int vmw_getparam_ioctl(struct drm_device *dev, void *data,
case DRM_VMW_PARAM_FIFO_HW_VERSION:
{
__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
-
- param->value = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION);
+ const struct vmw_fifo_state *fifo = &dev_priv->fifo;
+
+ param->value =
+ ioread32(fifo_mem +
+ ((fifo->capabilities &
+ SVGA_FIFO_CAP_3D_HWVERSION_REVISED) ?
+ SVGA_FIFO_3D_HWVERSION_REVISED :
+ SVGA_FIFO_3D_HWVERSION));
break;
}
default:
@@ -166,13 +172,7 @@ int vmw_present_ioctl(struct drm_device *dev, void *data,
ret = -EINVAL;
goto out_no_fb;
}
-
vfb = vmw_framebuffer_to_vfb(obj_to_fb(obj));
- if (!vfb->dmabuf) {
- DRM_ERROR("Framebuffer not dmabuf backed.\n");
- ret = -EINVAL;
- goto out_no_fb;
- }
ret = ttm_read_lock(&vmaster->lock, true);
if (unlikely(ret != 0))
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 37d40545ed7..f94b33ae221 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -31,6 +31,44 @@
/* Might need a hrtimer here? */
#define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1)
+
+struct vmw_clip_rect {
+ int x1, x2, y1, y2;
+};
+
+/**
+ * Clip @num_rects number of @rects against @clip storing the
+ * results in @out_rects and the number of passed rects in @out_num.
+ */
+void vmw_clip_cliprects(struct drm_clip_rect *rects,
+ int num_rects,
+ struct vmw_clip_rect clip,
+ SVGASignedRect *out_rects,
+ int *out_num)
+{
+ int i, k;
+
+ for (i = 0, k = 0; i < num_rects; i++) {
+ int x1 = max_t(int, clip.x1, rects[i].x1);
+ int y1 = max_t(int, clip.y1, rects[i].y1);
+ int x2 = min_t(int, clip.x2, rects[i].x2);
+ int y2 = min_t(int, clip.y2, rects[i].y2);
+
+ if (x1 >= x2)
+ continue;
+ if (y1 >= y2)
+ continue;
+
+ out_rects[k].left = x1;
+ out_rects[k].top = y1;
+ out_rects[k].right = x2;
+ out_rects[k].bottom = y2;
+ k++;
+ }
+
+ *out_num = k;
+}
+
void vmw_display_unit_cleanup(struct vmw_display_unit *du)
{
if (du->cursor_surface)
@@ -82,6 +120,43 @@ int vmw_cursor_update_image(struct vmw_private *dev_priv,
return 0;
}
+int vmw_cursor_update_dmabuf(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *dmabuf,
+ u32 width, u32 height,
+ u32 hotspotX, u32 hotspotY)
+{
+ struct ttm_bo_kmap_obj map;
+ unsigned long kmap_offset;
+ unsigned long kmap_num;
+ void *virtual;
+ bool dummy;
+ int ret;
+
+ kmap_offset = 0;
+ kmap_num = (width*height*4 + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+ ret = ttm_bo_reserve(&dmabuf->base, true, false, false, 0);
+ if (unlikely(ret != 0)) {
+ DRM_ERROR("reserve failed\n");
+ return -EINVAL;
+ }
+
+ ret = ttm_bo_kmap(&dmabuf->base, kmap_offset, kmap_num, &map);
+ if (unlikely(ret != 0))
+ goto err_unreserve;
+
+ virtual = ttm_kmap_obj_virtual(&map, &dummy);
+ ret = vmw_cursor_update_image(dev_priv, virtual, width, height,
+ hotspotX, hotspotY);
+
+ ttm_bo_kunmap(&map);
+err_unreserve:
+ ttm_bo_unreserve(&dmabuf->base);
+
+ return ret;
+}
+
+
void vmw_cursor_update_position(struct vmw_private *dev_priv,
bool show, int x, int y)
{
@@ -110,24 +185,21 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
return -EINVAL;
if (handle) {
- ret = vmw_user_surface_lookup_handle(dev_priv, tfile,
- handle, &surface);
- if (!ret) {
- if (!surface->snooper.image) {
- DRM_ERROR("surface not suitable for cursor\n");
- vmw_surface_unreference(&surface);
- return -EINVAL;
- }
- } else {
- ret = vmw_user_dmabuf_lookup(tfile,
- handle, &dmabuf);
- if (ret) {
- DRM_ERROR("failed to find surface or dmabuf: %i\n", ret);
- return -EINVAL;
- }
+ ret = vmw_user_lookup_handle(dev_priv, tfile,
+ handle, &surface, &dmabuf);
+ if (ret) {
+ DRM_ERROR("failed to find surface or dmabuf: %i\n", ret);
+ return -EINVAL;
}
}
+ /* need to do this before taking down old image */
+ if (surface && !surface->snooper.image) {
+ DRM_ERROR("surface not suitable for cursor\n");
+ vmw_surface_unreference(&surface);
+ return -EINVAL;
+ }
+
/* takedown old cursor */
if (du->cursor_surface) {
du->cursor_surface->snooper.crtc = NULL;
@@ -146,36 +218,11 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
vmw_cursor_update_image(dev_priv, surface->snooper.image,
64, 64, du->hotspot_x, du->hotspot_y);
} else if (dmabuf) {
- struct ttm_bo_kmap_obj map;
- unsigned long kmap_offset;
- unsigned long kmap_num;
- void *virtual;
- bool dummy;
-
/* vmw_user_surface_lookup takes one reference */
du->cursor_dmabuf = dmabuf;
- kmap_offset = 0;
- kmap_num = (64*64*4) >> PAGE_SHIFT;
-
- ret = ttm_bo_reserve(&dmabuf->base, true, false, false, 0);
- if (unlikely(ret != 0)) {
- DRM_ERROR("reserve failed\n");
- return -EINVAL;
- }
-
- ret = ttm_bo_kmap(&dmabuf->base, kmap_offset, kmap_num, &map);
- if (unlikely(ret != 0))
- goto err_unreserve;
-
- virtual = ttm_kmap_obj_virtual(&map, &dummy);
- vmw_cursor_update_image(dev_priv, virtual, 64, 64,
- du->hotspot_x, du->hotspot_y);
-
- ttm_bo_kunmap(&map);
-err_unreserve:
- ttm_bo_unreserve(&dmabuf->base);
-
+ ret = vmw_cursor_update_dmabuf(dev_priv, dmabuf, width, height,
+ du->hotspot_x, du->hotspot_y);
} else {
vmw_cursor_update_position(dev_priv, false, 0, 0);
return 0;
@@ -377,8 +424,9 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
struct drm_clip_rect *clips,
unsigned num_clips, int inc)
{
- struct drm_clip_rect *clips_ptr;
struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS];
+ struct drm_clip_rect *clips_ptr;
+ struct drm_clip_rect *tmp;
struct drm_crtc *crtc;
size_t fifo_size;
int i, num_units;
@@ -391,7 +439,6 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
} *cmd;
SVGASignedRect *blits;
-
num_units = 0;
list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list,
head) {
@@ -402,13 +449,24 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
BUG_ON(!clips || !num_clips);
+ tmp = kzalloc(sizeof(*tmp) * num_clips, GFP_KERNEL);
+ if (unlikely(tmp == NULL)) {
+ DRM_ERROR("Temporary cliprect memory alloc failed.\n");
+ return -ENOMEM;
+ }
+
fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips;
cmd = kzalloc(fifo_size, GFP_KERNEL);
if (unlikely(cmd == NULL)) {
DRM_ERROR("Temporary fifo memory alloc failed.\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_free_tmp;
}
+ /* setup blits pointer */
+ blits = (SVGASignedRect *)&cmd[1];
+
+ /* initial clip region */
left = clips->x1;
right = clips->x2;
top = clips->y1;
@@ -434,45 +492,60 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
cmd->body.srcRect.bottom = bottom;
clips_ptr = clips;
- blits = (SVGASignedRect *)&cmd[1];
for (i = 0; i < num_clips; i++, clips_ptr += inc) {
- blits[i].left = clips_ptr->x1 - left;
- blits[i].right = clips_ptr->x2 - left;
- blits[i].top = clips_ptr->y1 - top;
- blits[i].bottom = clips_ptr->y2 - top;
+ tmp[i].x1 = clips_ptr->x1 - left;
+ tmp[i].x2 = clips_ptr->x2 - left;
+ tmp[i].y1 = clips_ptr->y1 - top;
+ tmp[i].y2 = clips_ptr->y2 - top;
}
/* do per unit writing, reuse fifo for each */
for (i = 0; i < num_units; i++) {
struct vmw_display_unit *unit = units[i];
- int clip_x1 = left - unit->crtc.x;
- int clip_y1 = top - unit->crtc.y;
- int clip_x2 = right - unit->crtc.x;
- int clip_y2 = bottom - unit->crtc.y;
+ struct vmw_clip_rect clip;
+ int num;
+
+ clip.x1 = left - unit->crtc.x;
+ clip.y1 = top - unit->crtc.y;
+ clip.x2 = right - unit->crtc.x;
+ clip.y2 = bottom - unit->crtc.y;
/* skip any crtcs that misses the clip region */
- if (clip_x1 >= unit->crtc.mode.hdisplay ||
- clip_y1 >= unit->crtc.mode.vdisplay ||
- clip_x2 <= 0 || clip_y2 <= 0)
+ if (clip.x1 >= unit->crtc.mode.hdisplay ||
+ clip.y1 >= unit->crtc.mode.vdisplay ||
+ clip.x2 <= 0 || clip.y2 <= 0)
continue;
+ /*
+ * In order for the clip rects to be correctly scaled
+ * the src and dest rects needs to be the same size.
+ */
+ cmd->body.destRect.left = clip.x1;
+ cmd->body.destRect.right = clip.x2;
+ cmd->body.destRect.top = clip.y1;
+ cmd->body.destRect.bottom = clip.y2;
+
+ /* create a clip rect of the crtc in dest coords */
+ clip.x2 = unit->crtc.mode.hdisplay - clip.x1;
+ clip.y2 = unit->crtc.mode.vdisplay - clip.y1;
+ clip.x1 = 0 - clip.x1;
+ clip.y1 = 0 - clip.y1;
+
/* need to reset sid as it is changed by execbuf */
cmd->body.srcImage.sid = cpu_to_le32(framebuffer->user_handle);
-
cmd->body.destScreenId = unit->unit;
- /*
- * The blit command is a lot more resilient then the
- * readback command when it comes to clip rects. So its
- * okay to go out of bounds.
- */
+ /* clip and write blits to cmd stream */
+ vmw_clip_cliprects(tmp, num_clips, clip, blits, &num);
- cmd->body.destRect.left = clip_x1;
- cmd->body.destRect.right = clip_x2;
- cmd->body.destRect.top = clip_y1;
- cmd->body.destRect.bottom = clip_y2;
+ /* if no cliprects hit skip this */
+ if (num == 0)
+ continue;
+ /* recalculate package length */
+ fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num;
+ cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd,
fifo_size, 0, NULL);
@@ -480,7 +553,10 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
break;
}
+
kfree(cmd);
+out_free_tmp:
+ kfree(tmp);
return ret;
}
@@ -556,6 +632,10 @@ static int vmw_kms_new_framebuffer_surface(struct vmw_private *dev_priv,
* Sanity checks.
*/
+ /* Surface must be marked as a scanout. */
+ if (unlikely(!surface->scanout))
+ return -EINVAL;
+
if (unlikely(surface->mip_levels[0] != 1 ||
surface->num_sizes != 1 ||
surface->sizes[0].width < mode_cmd->width ||
@@ -782,6 +862,7 @@ static int do_dmabuf_dirty_sou(struct drm_file *file_priv,
int clip_y1 = clips_ptr->y1 - unit->crtc.y;
int clip_x2 = clips_ptr->x2 - unit->crtc.x;
int clip_y2 = clips_ptr->y2 - unit->crtc.y;
+ int move_x, move_y;
/* skip any crtcs that misses the clip region */
if (clip_x1 >= unit->crtc.mode.hdisplay ||
@@ -789,12 +870,21 @@ static int do_dmabuf_dirty_sou(struct drm_file *file_priv,
clip_x2 <= 0 || clip_y2 <= 0)
continue;
+ /* clip size to crtc size */
+ clip_x2 = min_t(int, clip_x2, unit->crtc.mode.hdisplay);
+ clip_y2 = min_t(int, clip_y2, unit->crtc.mode.vdisplay);
+
+ /* translate both src and dest to bring clip into screen */
+ move_x = min_t(int, clip_x1, 0);
+ move_y = min_t(int, clip_y1, 0);
+
+ /* actual translate done here */
blits[hit_num].header = SVGA_CMD_BLIT_GMRFB_TO_SCREEN;
blits[hit_num].body.destScreenId = unit->unit;
- blits[hit_num].body.srcOrigin.x = clips_ptr->x1;
- blits[hit_num].body.srcOrigin.y = clips_ptr->y1;
- blits[hit_num].body.destRect.left = clip_x1;
- blits[hit_num].body.destRect.top = clip_y1;
+ blits[hit_num].body.srcOrigin.x = clips_ptr->x1 - move_x;
+ blits[hit_num].body.srcOrigin.y = clips_ptr->y1 - move_y;
+ blits[hit_num].body.destRect.left = clip_x1 - move_x;
+ blits[hit_num].body.destRect.top = clip_y1 - move_y;
blits[hit_num].body.destRect.right = clip_x2;
blits[hit_num].body.destRect.bottom = clip_y2;
hit_num++;
@@ -1003,7 +1093,6 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev,
struct vmw_surface *surface = NULL;
struct vmw_dma_buffer *bo = NULL;
struct ttm_base_object *user_obj;
- u64 required_size;
int ret;
/**
@@ -1012,8 +1101,9 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev,
* requested framebuffer.
*/
- required_size = mode_cmd->pitch * mode_cmd->height;
- if (unlikely(required_size > (u64) dev_priv->vram_size)) {
+ if (!vmw_kms_validate_mode_vram(dev_priv,
+ mode_cmd->pitch,
+ mode_cmd->height)) {
DRM_ERROR("VRAM size is too small for requested mode.\n");
return ERR_PTR(-ENOMEM);
}
@@ -1033,46 +1123,29 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev,
return ERR_PTR(-ENOENT);
}
- /**
- * End conditioned code.
- */
-
- ret = vmw_user_surface_lookup_handle(dev_priv, tfile,
- mode_cmd->handle, &surface);
+ /* returns either a dmabuf or surface */
+ ret = vmw_user_lookup_handle(dev_priv, tfile,
+ mode_cmd->handle,
+ &surface, &bo);
if (ret)
- goto try_dmabuf;
-
- if (!surface->scanout)
- goto err_not_scanout;
-
- ret = vmw_kms_new_framebuffer_surface(dev_priv, file_priv, surface,
- &vfb, mode_cmd);
-
- /* vmw_user_surface_lookup takes one ref so does new_fb */
- vmw_surface_unreference(&surface);
-
- if (ret) {
- DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret);
- ttm_base_object_unref(&user_obj);
- return ERR_PTR(ret);
- } else
- vfb->user_obj = user_obj;
- return &vfb->base;
-
-try_dmabuf:
- DRM_INFO("%s: trying buffer\n", __func__);
-
- ret = vmw_user_dmabuf_lookup(tfile, mode_cmd->handle, &bo);
- if (ret) {
- DRM_ERROR("failed to find buffer: %i\n", ret);
- return ERR_PTR(-ENOENT);
- }
-
- ret = vmw_kms_new_framebuffer_dmabuf(dev_priv, bo, &vfb,
- mode_cmd);
+ goto err_out;
+
+ /* Create the new framebuffer depending one what we got back */
+ if (bo)
+ ret = vmw_kms_new_framebuffer_dmabuf(dev_priv, bo, &vfb,
+ mode_cmd);
+ else if (surface)
+ ret = vmw_kms_new_framebuffer_surface(dev_priv, file_priv,
+ surface, &vfb, mode_cmd);
+ else
+ BUG();
- /* vmw_user_dmabuf_lookup takes one ref so does new_fb */
- vmw_dmabuf_unreference(&bo);
+err_out:
+ /* vmw_user_lookup_handle takes one ref so does new_fb */
+ if (bo)
+ vmw_dmabuf_unreference(&bo);
+ if (surface)
+ vmw_surface_unreference(&surface);
if (ret) {
DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret);
@@ -1082,14 +1155,6 @@ try_dmabuf:
vfb->user_obj = user_obj;
return &vfb->base;
-
-err_not_scanout:
- DRM_ERROR("surface not marked as scanout\n");
- /* vmw_user_surface_lookup takes one ref */
- vmw_surface_unreference(&surface);
- ttm_base_object_unref(&user_obj);
-
- return ERR_PTR(-EINVAL);
}
static struct drm_mode_config_funcs vmw_kms_funcs = {
@@ -1106,10 +1171,12 @@ int vmw_kms_present(struct vmw_private *dev_priv,
uint32_t num_clips)
{
struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS];
+ struct drm_clip_rect *tmp;
struct drm_crtc *crtc;
size_t fifo_size;
int i, k, num_units;
int ret = 0; /* silence warning */
+ int left, right, top, bottom;
struct {
SVGA3dCmdHeader header;
@@ -1127,60 +1194,95 @@ int vmw_kms_present(struct vmw_private *dev_priv,
BUG_ON(surface == NULL);
BUG_ON(!clips || !num_clips);
+ tmp = kzalloc(sizeof(*tmp) * num_clips, GFP_KERNEL);
+ if (unlikely(tmp == NULL)) {
+ DRM_ERROR("Temporary cliprect memory alloc failed.\n");
+ return -ENOMEM;
+ }
+
fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips;
cmd = kmalloc(fifo_size, GFP_KERNEL);
if (unlikely(cmd == NULL)) {
DRM_ERROR("Failed to allocate temporary fifo memory.\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_free_tmp;
+ }
+
+ left = clips->x;
+ right = clips->x + clips->w;
+ top = clips->y;
+ bottom = clips->y + clips->h;
+
+ for (i = 1; i < num_clips; i++) {
+ left = min_t(int, left, (int)clips[i].x);
+ right = max_t(int, right, (int)clips[i].x + clips[i].w);
+ top = min_t(int, top, (int)clips[i].y);
+ bottom = max_t(int, bottom, (int)clips[i].y + clips[i].h);
}
/* only need to do this once */
memset(cmd, 0, fifo_size);
cmd->header.id = cpu_to_le32(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN);
- cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
-
- cmd->body.srcRect.left = 0;
- cmd->body.srcRect.right = surface->sizes[0].width;
- cmd->body.srcRect.top = 0;
- cmd->body.srcRect.bottom = surface->sizes[0].height;
blits = (SVGASignedRect *)&cmd[1];
+
+ cmd->body.srcRect.left = left;
+ cmd->body.srcRect.right = right;
+ cmd->body.srcRect.top = top;
+ cmd->body.srcRect.bottom = bottom;
+
for (i = 0; i < num_clips; i++) {
- blits[i].left = clips[i].x;
- blits[i].right = clips[i].x + clips[i].w;
- blits[i].top = clips[i].y;
- blits[i].bottom = clips[i].y + clips[i].h;
+ tmp[i].x1 = clips[i].x - left;
+ tmp[i].x2 = clips[i].x + clips[i].w - left;
+ tmp[i].y1 = clips[i].y - top;
+ tmp[i].y2 = clips[i].y + clips[i].h - top;
}
for (k = 0; k < num_units; k++) {
struct vmw_display_unit *unit = units[k];
- int clip_x1 = destX - unit->crtc.x;
- int clip_y1 = destY - unit->crtc.y;
- int clip_x2 = clip_x1 + surface->sizes[0].width;
- int clip_y2 = clip_y1 + surface->sizes[0].height;
+ struct vmw_clip_rect clip;
+ int num;
+
+ clip.x1 = left + destX - unit->crtc.x;
+ clip.y1 = top + destY - unit->crtc.y;
+ clip.x2 = right + destX - unit->crtc.x;
+ clip.y2 = bottom + destY - unit->crtc.y;
/* skip any crtcs that misses the clip region */
- if (clip_x1 >= unit->crtc.mode.hdisplay ||
- clip_y1 >= unit->crtc.mode.vdisplay ||
- clip_x2 <= 0 || clip_y2 <= 0)
+ if (clip.x1 >= unit->crtc.mode.hdisplay ||
+ clip.y1 >= unit->crtc.mode.vdisplay ||
+ clip.x2 <= 0 || clip.y2 <= 0)
continue;
+ /*
+ * In order for the clip rects to be correctly scaled
+ * the src and dest rects needs to be the same size.
+ */
+ cmd->body.destRect.left = clip.x1;
+ cmd->body.destRect.right = clip.x2;
+ cmd->body.destRect.top = clip.y1;
+ cmd->body.destRect.bottom = clip.y2;
+
+ /* create a clip rect of the crtc in dest coords */
+ clip.x2 = unit->crtc.mode.hdisplay - clip.x1;
+ clip.y2 = unit->crtc.mode.vdisplay - clip.y1;
+ clip.x1 = 0 - clip.x1;
+ clip.y1 = 0 - clip.y1;
+
/* need to reset sid as it is changed by execbuf */
cmd->body.srcImage.sid = sid;
-
cmd->body.destScreenId = unit->unit;
- /*
- * The blit command is a lot more resilient then the
- * readback command when it comes to clip rects. So its
- * okay to go out of bounds.
- */
+ /* clip and write blits to cmd stream */
+ vmw_clip_cliprects(tmp, num_clips, clip, blits, &num);
- cmd->body.destRect.left = clip_x1;
- cmd->body.destRect.right = clip_x2;
- cmd->body.destRect.top = clip_y1;
- cmd->body.destRect.bottom = clip_y2;
+ /* if no cliprects hit skip this */
+ if (num == 0)
+ continue;
+ /* recalculate package length */
+ fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num;
+ cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd,
fifo_size, 0, NULL);
@@ -1189,6 +1291,8 @@ int vmw_kms_present(struct vmw_private *dev_priv,
}
kfree(cmd);
+out_free_tmp:
+ kfree(tmp);
return ret;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
index af8e6e5bd96..e1cb8556355 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
@@ -62,9 +62,14 @@ struct vmw_framebuffer {
int vmw_cursor_update_image(struct vmw_private *dev_priv,
u32 *image, u32 width, u32 height,
u32 hotspotX, u32 hotspotY);
+int vmw_cursor_update_dmabuf(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *dmabuf,
+ u32 width, u32 height,
+ u32 hotspotX, u32 hotspotY);
void vmw_cursor_update_position(struct vmw_private *dev_priv,
bool show, int x, int y);
+
/**
* Base class display unit.
*
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
index 90c5e392849..8f8dbd43c33 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
@@ -74,9 +74,10 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv)
{
struct vmw_legacy_display *lds = dev_priv->ldu_priv;
struct vmw_legacy_display_unit *entry;
+ struct vmw_display_unit *du = NULL;
struct drm_framebuffer *fb = NULL;
struct drm_crtc *crtc = NULL;
- int i = 0;
+ int i = 0, ret;
/* If there is no display topology the host just assumes
* that the guest will set the same layout as the host.
@@ -129,6 +130,25 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv)
lds->last_num_active = lds->num_active;
+
+ /* Find the first du with a cursor. */
+ list_for_each_entry(entry, &lds->active, active) {
+ du = &entry->base;
+
+ if (!du->cursor_dmabuf)
+ continue;
+
+ ret = vmw_cursor_update_dmabuf(dev_priv,
+ du->cursor_dmabuf,
+ 64, 64,
+ du->hotspot_x,
+ du->hotspot_y);
+ if (ret == 0)
+ break;
+
+ DRM_ERROR("Could not update cursor image\n");
+ }
+
return 0;
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 86c5e4cceb3..1c7f09e2681 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -1190,6 +1190,29 @@ void vmw_resource_unreserve(struct list_head *list)
write_unlock(lock);
}
+/**
+ * Helper function that looks either a surface or dmabuf.
+ *
+ * The pointer this pointed at by out_surf and out_buf needs to be null.
+ */
+int vmw_user_lookup_handle(struct vmw_private *dev_priv,
+ struct ttm_object_file *tfile,
+ uint32_t handle,
+ struct vmw_surface **out_surf,
+ struct vmw_dma_buffer **out_buf)
+{
+ int ret;
+
+ BUG_ON(*out_surf || *out_buf);
+
+ ret = vmw_user_surface_lookup_handle(dev_priv, tfile, handle, out_surf);
+ if (!ret)
+ return 0;
+
+ ret = vmw_user_dmabuf_lookup(tfile, handle, out_buf);
+ return ret;
+}
+
int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv,
struct ttm_object_file *tfile,
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 8cebef49aea..18936ac9d51 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -893,6 +893,13 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
/* Set the number of I2C channel instance */
adap_info->ch_num = id->driver_data;
+ ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
+ KBUILD_MODNAME, adap_info);
+ if (ret) {
+ pch_pci_err(pdev, "request_irq FAILED\n");
+ goto err_request_irq;
+ }
+
for (i = 0; i < adap_info->ch_num; i++) {
pch_adap = &adap_info->pch_data[i].pch_adapter;
adap_info->pch_i2c_suspended = false;
@@ -910,28 +917,23 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
pch_adap->dev.parent = &pdev->dev;
+ pch_i2c_init(&adap_info->pch_data[i]);
ret = i2c_add_adapter(pch_adap);
if (ret) {
pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i);
- goto err_i2c_add_adapter;
+ goto err_add_adapter;
}
-
- pch_i2c_init(&adap_info->pch_data[i]);
- }
- ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
- KBUILD_MODNAME, adap_info);
- if (ret) {
- pch_pci_err(pdev, "request_irq FAILED\n");
- goto err_i2c_add_adapter;
}
pci_set_drvdata(pdev, adap_info);
pch_pci_dbg(pdev, "returns %d.\n", ret);
return 0;
-err_i2c_add_adapter:
+err_add_adapter:
for (j = 0; j < i; j++)
i2c_del_adapter(&adap_info->pch_data[j].pch_adapter);
+ free_irq(pdev->irq, adap_info);
+err_request_irq:
pci_iounmap(pdev, base_addr);
err_pci_iomap:
pci_release_regions(pdev);
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a43d0023446..fa23faa20f0 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1047,13 +1047,14 @@ omap_i2c_probe(struct platform_device *pdev)
* size. This is to ensure that we can handle the status on int
* call back latencies.
*/
- if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) {
- dev->fifo_size = 0;
+
+ dev->fifo_size = (dev->fifo_size / 2);
+
+ if (dev->rev >= OMAP_I2C_REV_ON_3530_4430)
dev->b_hw = 0; /* Disable hardware fixes */
- } else {
- dev->fifo_size = (dev->fifo_size / 2);
+ else
dev->b_hw = 1; /* Enable hardware fixes */
- }
+
/* calculate wakeup latency constraint for MPU */
if (dev->set_mpu_wkup_lat != NULL)
dev->latency = (1000000 * dev->fifo_size) /
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 2754cef86a0..4c171808168 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -534,6 +534,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
/* first, try busy waiting briefly */
do {
+ cpu_relax();
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
} while ((iicstat & S3C2410_IICSTAT_START) && --spins);
@@ -786,7 +787,7 @@ static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
#else
static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
{
- return -EINVAL;
+ return 0;
}
static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index 6dede8f366c..41d41552947 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -314,7 +314,7 @@ static int __init at91_ide_probe(struct platform_device *pdev)
apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
/* with GPIO interrupt we have to do quirks in handler */
- if (board->irq_pin >= PIN_BASE)
+ if (gpio_is_valid(board->irq_pin))
host->irq_handler = at91_irq_handler;
host->ports[0]->select_data = board->chipselect;
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 75ff821c0af..d0d4aa9f480 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2513,6 +2513,9 @@ static int cma_resolve_ib_udp(struct rdma_id_private *id_priv,
req.private_data_len = sizeof(struct cma_hdr) +
conn_param->private_data_len;
+ if (req.private_data_len < conn_param->private_data_len)
+ return -EINVAL;
+
req.private_data = kzalloc(req.private_data_len, GFP_ATOMIC);
if (!req.private_data)
return -ENOMEM;
@@ -2562,6 +2565,9 @@ static int cma_connect_ib(struct rdma_id_private *id_priv,
memset(&req, 0, sizeof req);
offset = cma_user_data_offset(id_priv->id.ps);
req.private_data_len = offset + conn_param->private_data_len;
+ if (req.private_data_len < conn_param->private_data_len)
+ return -EINVAL;
+
private_data = kzalloc(req.private_data_len, GFP_ATOMIC);
if (!private_data)
return -ENOMEM;
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index 77f3dbc0aaa..18836cdf1e1 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1244,7 +1244,8 @@ err_reg:
err_counter:
for (; i; --i)
- mlx4_counter_free(ibdev->dev, ibdev->counters[i - 1]);
+ if (ibdev->counters[i - 1] != -1)
+ mlx4_counter_free(ibdev->dev, ibdev->counters[i - 1]);
err_map:
iounmap(ibdev->uar_map);
@@ -1275,7 +1276,8 @@ static void mlx4_ib_remove(struct mlx4_dev *dev, void *ibdev_ptr)
}
iounmap(ibdev->uar_map);
for (p = 0; p < ibdev->num_ports; ++p)
- mlx4_counter_free(ibdev->dev, ibdev->counters[p]);
+ if (ibdev->counters[p] != -1)
+ mlx4_counter_free(ibdev->dev, ibdev->counters[p]);
mlx4_foreach_port(p, dev, MLX4_PORT_TYPE_IB)
mlx4_CLOSE_PORT(dev, p);
diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c
index 574600ef5b4..a7403248d83 100644
--- a/drivers/infiniband/hw/qib/qib_file_ops.c
+++ b/drivers/infiniband/hw/qib/qib_file_ops.c
@@ -1285,7 +1285,7 @@ static int setup_ctxt(struct qib_pportdata *ppd, int ctxt,
strlcpy(rcd->comm, current->comm, sizeof(rcd->comm));
ctxt_fp(fp) = rcd;
qib_stats.sps_ctxts++;
- dd->freectxts++;
+ dd->freectxts--;
ret = 0;
goto bail;
@@ -1794,7 +1794,7 @@ static int qib_close(struct inode *in, struct file *fp)
if (dd->pageshadow)
unlock_expected_tids(rcd);
qib_stats.sps_ctxts--;
- dd->freectxts--;
+ dd->freectxts++;
}
mutex_unlock(&qib_mutex);
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index f689f49e310..8a0060cd398 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -21,6 +21,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/sched.h>
#include <plat/keypad.h>
@@ -68,31 +70,26 @@ struct samsung_keypad {
wait_queue_head_t wait;
bool stopped;
int irq;
+ enum samsung_keypad_type type;
unsigned int row_shift;
unsigned int rows;
unsigned int cols;
unsigned int row_state[SAMSUNG_MAX_COLS];
+#ifdef CONFIG_OF
+ int row_gpios[SAMSUNG_MAX_ROWS];
+ int col_gpios[SAMSUNG_MAX_COLS];
+#endif
unsigned short keycodes[];
};
-static int samsung_keypad_is_s5pv210(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- enum samsung_keypad_type type =
- platform_get_device_id(pdev)->driver_data;
-
- return type == KEYPAD_TYPE_S5PV210;
-}
-
static void samsung_keypad_scan(struct samsung_keypad *keypad,
unsigned int *row_state)
{
- struct device *dev = keypad->input_dev->dev.parent;
unsigned int col;
unsigned int val;
for (col = 0; col < keypad->cols; col++) {
- if (samsung_keypad_is_s5pv210(dev)) {
+ if (keypad->type == KEYPAD_TYPE_S5PV210) {
val = S5PV210_KEYIFCOLEN_MASK;
val &= ~(1 << col) << 8;
} else {
@@ -235,6 +232,126 @@ static void samsung_keypad_close(struct input_dev *input_dev)
samsung_keypad_stop(keypad);
}
+#ifdef CONFIG_OF
+static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
+ struct device *dev)
+{
+ struct samsung_keypad_platdata *pdata;
+ struct matrix_keymap_data *keymap_data;
+ uint32_t *keymap, num_rows = 0, num_cols = 0;
+ struct device_node *np = dev->of_node, *key_np;
+ unsigned int key_count = 0;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "could not allocate memory for platform data\n");
+ return NULL;
+ }
+
+ of_property_read_u32(np, "samsung,keypad-num-rows", &num_rows);
+ of_property_read_u32(np, "samsung,keypad-num-columns", &num_cols);
+ if (!num_rows || !num_cols) {
+ dev_err(dev, "number of keypad rows/columns not specified\n");
+ return NULL;
+ }
+ pdata->rows = num_rows;
+ pdata->cols = num_cols;
+
+ keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL);
+ if (!keymap_data) {
+ dev_err(dev, "could not allocate memory for keymap data\n");
+ return NULL;
+ }
+ pdata->keymap_data = keymap_data;
+
+ for_each_child_of_node(np, key_np)
+ key_count++;
+
+ keymap_data->keymap_size = key_count;
+ keymap = devm_kzalloc(dev, sizeof(uint32_t) * key_count, GFP_KERNEL);
+ if (!keymap) {
+ dev_err(dev, "could not allocate memory for keymap\n");
+ return NULL;
+ }
+ keymap_data->keymap = keymap;
+
+ for_each_child_of_node(np, key_np) {
+ u32 row, col, key_code;
+ of_property_read_u32(key_np, "keypad,row", &row);
+ of_property_read_u32(key_np, "keypad,column", &col);
+ of_property_read_u32(key_np, "linux,code", &key_code);
+ *keymap++ = KEY(row, col, key_code);
+ }
+
+ if (of_get_property(np, "linux,input-no-autorepeat", NULL))
+ pdata->no_autorepeat = true;
+ if (of_get_property(np, "linux,input-wakeup", NULL))
+ pdata->wakeup = true;
+
+ return pdata;
+}
+
+static void samsung_keypad_parse_dt_gpio(struct device *dev,
+ struct samsung_keypad *keypad)
+{
+ struct device_node *np = dev->of_node;
+ int gpio, ret, row, col;
+
+ for (row = 0; row < keypad->rows; row++) {
+ gpio = of_get_named_gpio(np, "row-gpios", row);
+ keypad->row_gpios[row] = gpio;
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "keypad row[%d]: invalid gpio %d\n",
+ row, gpio);
+ continue;
+ }
+
+ ret = gpio_request(gpio, "keypad-row");
+ if (ret)
+ dev_err(dev, "keypad row[%d] gpio request failed\n",
+ row);
+ }
+
+ for (col = 0; col < keypad->cols; col++) {
+ gpio = of_get_named_gpio(np, "col-gpios", col);
+ keypad->col_gpios[col] = gpio;
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "keypad column[%d]: invalid gpio %d\n",
+ col, gpio);
+ continue;
+ }
+
+ ret = gpio_request(gpio, "keypad-col");
+ if (ret)
+ dev_err(dev, "keypad column[%d] gpio request failed\n",
+ col);
+ }
+}
+
+static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad)
+{
+ int cnt;
+
+ for (cnt = 0; cnt < keypad->rows; cnt++)
+ if (gpio_is_valid(keypad->row_gpios[cnt]))
+ gpio_free(keypad->row_gpios[cnt]);
+
+ for (cnt = 0; cnt < keypad->cols; cnt++)
+ if (gpio_is_valid(keypad->col_gpios[cnt]))
+ gpio_free(keypad->col_gpios[cnt]);
+}
+#else
+static
+struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+
+static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad)
+{
+}
+#endif
+
static int __devinit samsung_keypad_probe(struct platform_device *pdev)
{
const struct samsung_keypad_platdata *pdata;
@@ -246,7 +363,10 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
unsigned int keymap_size;
int error;
- pdata = pdev->dev.platform_data;
+ if (pdev->dev.of_node)
+ pdata = samsung_keypad_parse_dt(&pdev->dev);
+ else
+ pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "no platform data defined\n");
return -EINVAL;
@@ -303,6 +423,16 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
keypad->cols = pdata->cols;
init_waitqueue_head(&keypad->wait);
+ if (pdev->dev.of_node) {
+#ifdef CONFIG_OF
+ samsung_keypad_parse_dt_gpio(&pdev->dev, keypad);
+ keypad->type = of_device_is_compatible(pdev->dev.of_node,
+ "samsung,s5pv210-keypad");
+#endif
+ } else {
+ keypad->type = platform_get_device_id(pdev)->driver_data;
+ }
+
input_dev->name = pdev->name;
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &pdev->dev;
@@ -343,12 +473,19 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, pdata->wakeup);
platform_set_drvdata(pdev, keypad);
+
+ if (pdev->dev.of_node) {
+ devm_kfree(&pdev->dev, (void *)pdata->keymap_data->keymap);
+ devm_kfree(&pdev->dev, (void *)pdata->keymap_data);
+ devm_kfree(&pdev->dev, (void *)pdata);
+ }
return 0;
err_free_irq:
free_irq(keypad->irq, keypad);
err_put_clk:
clk_put(keypad->clk);
+ samsung_keypad_dt_gpio_free(keypad);
err_unmap_base:
iounmap(keypad->base);
err_free_mem:
@@ -374,6 +511,7 @@ static int __devexit samsung_keypad_remove(struct platform_device *pdev)
free_irq(keypad->irq, keypad);
clk_put(keypad->clk);
+ samsung_keypad_dt_gpio_free(keypad);
iounmap(keypad->base);
kfree(keypad);
@@ -447,6 +585,17 @@ static const struct dev_pm_ops samsung_keypad_pm_ops = {
};
#endif
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_keypad_dt_match[] = {
+ { .compatible = "samsung,s3c6410-keypad" },
+ { .compatible = "samsung,s5pv210-keypad" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, samsung_keypad_dt_match);
+#else
+#define samsung_keypad_dt_match NULL
+#endif
+
static struct platform_device_id samsung_keypad_driver_ids[] = {
{
.name = "samsung-keypad",
@@ -465,6 +614,7 @@ static struct platform_driver samsung_keypad_driver = {
.driver = {
.name = "samsung-keypad",
.owner = THIS_MODULE,
+ .of_match_table = samsung_keypad_dt_match,
#ifdef CONFIG_PM
.pm = &samsung_keypad_pm_ops,
#endif
diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
index 80793f1608e..06517e60e50 100644
--- a/drivers/input/misc/cma3000_d0x.c
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -115,8 +115,8 @@ static void decode_mg(struct cma3000_accl_data *data, int *datax,
static irqreturn_t cma3000_thread_irq(int irq, void *dev_id)
{
struct cma3000_accl_data *data = dev_id;
- int datax, datay, dataz;
- u8 ctrl, mode, range, intr_status;
+ int datax, datay, dataz, intr_status;
+ u8 ctrl, mode, range;
intr_status = CMA3000_READ(data, CMA3000_INTSTATUS, "interrupt status");
if (intr_status < 0)
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index c5b12d2e955..86d6f39178b 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -2,7 +2,7 @@
* Finger Sensing Pad PS/2 mouse driver.
*
* Copyright (C) 2005-2007 Asia Vital Components Co., Ltd.
- * Copyright (C) 2005-2010 Tai-hwa Liang, Sentelic Corporation.
+ * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -162,7 +162,7 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val)
ps2_sendbyte(ps2dev, v, FSP_CMD_TIMEOUT2);
if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
- return -1;
+ goto out;
if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) {
/* inversion is required */
@@ -261,7 +261,7 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val)
ps2_sendbyte(ps2dev, 0x88, FSP_CMD_TIMEOUT2);
if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
- return -1;
+ goto out;
if ((v = fsp_test_invert_cmd(reg_val)) != reg_val) {
ps2_sendbyte(ps2dev, 0x47, FSP_CMD_TIMEOUT2);
@@ -309,7 +309,7 @@ static int fsp_get_buttons(struct psmouse *psmouse, int *btn)
};
int val;
- if (fsp_reg_read(psmouse, FSP_REG_TMOD_STATUS1, &val) == -1)
+ if (fsp_reg_read(psmouse, FSP_REG_TMOD_STATUS, &val) == -1)
return -EIO;
*btn = buttons[(val & 0x30) >> 4];
diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h
index ed1395ac7b8..2e4af24f8c1 100644
--- a/drivers/input/mouse/sentelic.h
+++ b/drivers/input/mouse/sentelic.h
@@ -2,7 +2,7 @@
* Finger Sensing Pad PS/2 mouse driver.
*
* Copyright (C) 2005-2007 Asia Vital Components Co., Ltd.
- * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation.
+ * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -33,6 +33,7 @@
/* Finger-sensing Pad control registers */
#define FSP_REG_SYSCTL1 0x10
#define FSP_BIT_EN_REG_CLK BIT(5)
+#define FSP_REG_TMOD_STATUS 0x20
#define FSP_REG_OPC_QDOWN 0x31
#define FSP_BIT_EN_OPC_TAG BIT(7)
#define FSP_REG_OPTZ_XLO 0x34
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index c080b828e5d..a6dcd18e9ad 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -24,6 +24,7 @@
*/
#include <linux/module.h>
+#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/input/mt.h>
#include <linux/serio.h>
@@ -1220,6 +1221,16 @@ static int synaptics_reconnect(struct psmouse *psmouse)
do {
psmouse_reset(psmouse);
+ if (retry) {
+ /*
+ * On some boxes, right after resuming, the touchpad
+ * needs some time to finish initializing (I assume
+ * it needs time to calibrate) and start responding
+ * to Synaptics-specific queries, so let's wait a
+ * bit.
+ */
+ ssleep(1);
+ }
error = synaptics_detect(psmouse, 0);
} while (error && ++retry < 3);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index da0d8761e77..2ee47d01a3b 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1470,6 +1470,9 @@ static const struct wacom_features wacom_features_0xE3 =
static const struct wacom_features wacom_features_0xE6 =
{ "Wacom ISDv4 E6", WACOM_PKGLEN_TPC2FG, 27760, 15694, 255,
0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xEC =
+ { "Wacom ISDv4 EC", WACOM_PKGLEN_GRAPHIRE, 25710, 14500, 255,
+ 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x47 =
{ "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023,
31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1611,6 +1614,7 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0xE2) },
{ USB_DEVICE_WACOM(0xE3) },
{ USB_DEVICE_WACOM(0xE6) },
+ { USB_DEVICE_WACOM(0xEC) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_LENOVO(0x6004) },
{ }
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 2fb2963df55..5b5fa5cdaa3 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -90,7 +90,7 @@ struct iommu_domain *iommu_domain_alloc(struct bus_type *bus)
if (bus == NULL || bus->iommu_ops == NULL)
return NULL;
- domain = kmalloc(sizeof(*domain), GFP_KERNEL);
+ domain = kzalloc(sizeof(*domain), GFP_KERNEL);
if (!domain)
return NULL;
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index b6907118283..6d03774b176 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1393,9 +1393,6 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto
atomic_read(&bitmap->behind_writes),
bitmap->mddev->bitmap_info.max_write_behind);
}
- if (bitmap->mddev->degraded)
- /* Never clear bits or update events_cleared when degraded */
- success = 0;
while (sectors) {
sector_t blocks;
@@ -1409,7 +1406,7 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto
return;
}
- if (success &&
+ if (success && !bitmap->mddev->degraded &&
bitmap->events_cleared < bitmap->mddev->events) {
bitmap->events_cleared = bitmap->mddev->events;
bitmap->need_sync = 1;
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index c3273efd08c..627456542fb 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -230,6 +230,7 @@ static int linear_add(struct mddev *mddev, struct md_rdev *rdev)
return -EINVAL;
rdev->raid_disk = rdev->saved_raid_disk;
+ rdev->saved_raid_disk = -1;
newconf = linear_conf(mddev,mddev->raid_disks+1);
diff --git a/drivers/md/md.c b/drivers/md/md.c
index ee981737edf..f47f1f8ac44 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7360,8 +7360,7 @@ static int remove_and_add_spares(struct mddev *mddev)
spares++;
md_new_event(mddev);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
- } else
- break;
+ }
}
}
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 31670f8d6b6..858fdbb7eb0 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3065,11 +3065,17 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
}
} else if (test_bit(In_sync, &rdev->flags))
set_bit(R5_Insync, &dev->flags);
- else {
+ else if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
/* in sync if before recovery_offset */
- if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
- set_bit(R5_Insync, &dev->flags);
- }
+ set_bit(R5_Insync, &dev->flags);
+ else if (test_bit(R5_UPTODATE, &dev->flags) &&
+ test_bit(R5_Expanded, &dev->flags))
+ /* If we've reshaped into here, we assume it is Insync.
+ * We will shortly update recovery_offset to make
+ * it official.
+ */
+ set_bit(R5_Insync, &dev->flags);
+
if (rdev && test_bit(R5_WriteError, &dev->flags)) {
clear_bit(R5_Insync, &dev->flags);
if (!test_bit(Faulty, &rdev->flags)) {
diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c
index 7eb1bf75cd0..5d02221e99d 100644
--- a/drivers/media/common/tuners/mxl5007t.c
+++ b/drivers/media/common/tuners/mxl5007t.c
@@ -488,9 +488,10 @@ static int mxl5007t_write_regs(struct mxl5007t_state *state,
static int mxl5007t_read_reg(struct mxl5007t_state *state, u8 reg, u8 *val)
{
+ u8 buf[2] = { 0xfb, reg };
struct i2c_msg msg[] = {
{ .addr = state->i2c_props.addr, .flags = 0,
- .buf = &reg, .len = 1 },
+ .buf = buf, .len = 2 },
{ .addr = state->i2c_props.addr, .flags = I2C_M_RD,
.buf = val, .len = 1 },
};
diff --git a/drivers/media/common/tuners/tda18218.c b/drivers/media/common/tuners/tda18218.c
index aacfe2387e2..4fc29730a12 100644
--- a/drivers/media/common/tuners/tda18218.c
+++ b/drivers/media/common/tuners/tda18218.c
@@ -141,7 +141,7 @@ static int tda18218_set_params(struct dvb_frontend *fe,
switch (params->u.ofdm.bandwidth) {
case BANDWIDTH_6_MHZ:
LP_Fc = 0;
- LO_Frac = params->frequency + 4000000;
+ LO_Frac = params->frequency + 3000000;
break;
case BANDWIDTH_7_MHZ:
LP_Fc = 1;
diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c
index 303f22ea04c..01bb8daf4b0 100644
--- a/drivers/media/rc/ati_remote.c
+++ b/drivers/media/rc/ati_remote.c
@@ -189,7 +189,7 @@ struct ati_remote {
dma_addr_t inbuf_dma;
dma_addr_t outbuf_dma;
- unsigned char old_data[2]; /* Detect duplicate events */
+ unsigned char old_data; /* Detect duplicate events */
unsigned long old_jiffies;
unsigned long acc_jiffies; /* handle acceleration */
unsigned long first_jiffies;
@@ -221,35 +221,35 @@ struct ati_remote {
/* Translation table from hardware messages to input events. */
static const struct {
short kind;
- unsigned char data1, data2;
+ unsigned char data;
int type;
unsigned int code;
int value;
} ati_remote_tbl[] = {
/* Directional control pad axes */
- {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */
- {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */
- {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */
- {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */
+ {KIND_ACCEL, 0x70, EV_REL, REL_X, -1}, /* left */
+ {KIND_ACCEL, 0x71, EV_REL, REL_X, 1}, /* right */
+ {KIND_ACCEL, 0x72, EV_REL, REL_Y, -1}, /* up */
+ {KIND_ACCEL, 0x73, EV_REL, REL_Y, 1}, /* down */
/* Directional control pad diagonals */
- {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */
- {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */
- {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */
- {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */
+ {KIND_LU, 0x74, EV_REL, 0, 0}, /* left up */
+ {KIND_RU, 0x75, EV_REL, 0, 0}, /* right up */
+ {KIND_LD, 0x77, EV_REL, 0, 0}, /* left down */
+ {KIND_RD, 0x76, EV_REL, 0, 0}, /* right down */
/* "Mouse button" buttons */
- {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
- {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
- {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
- {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
+ {KIND_LITERAL, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
+ {KIND_LITERAL, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
+ {KIND_LITERAL, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
+ {KIND_LITERAL, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
/* Artificial "doubleclick" events are generated by the hardware.
* They are mapped to the "side" and "extra" mouse buttons here. */
- {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
- {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
+ {KIND_FILTERED, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
+ {KIND_FILTERED, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
/* Non-mouse events are handled by rc-core */
- {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
+ {KIND_END, 0x00, EV_MAX + 1, 0, 0}
};
/* Local function prototypes */
@@ -397,25 +397,6 @@ static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigne
}
/*
- * ati_remote_event_lookup
- */
-static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
-{
- int i;
-
- for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
- /*
- * Decide if the table entry matches the remote input.
- */
- if (ati_remote_tbl[i].data1 == d1 &&
- ati_remote_tbl[i].data2 == d2)
- return i;
-
- }
- return -1;
-}
-
-/*
* ati_remote_compute_accel
*
* Implements acceleration curve for directional control pad
@@ -463,7 +444,15 @@ static void ati_remote_input_report(struct urb *urb)
int index = -1;
int acc;
int remote_num;
- unsigned char scancode[2];
+ unsigned char scancode;
+ int i;
+
+ /*
+ * data[0] = 0x14
+ * data[1] = data[2] + data[3] + 0xd5 (a checksum byte)
+ * data[2] = the key code (with toggle bit in MSB with some models)
+ * data[3] = channel << 4 (the low 4 bits must be zero)
+ */
/* Deal with strange looking inputs */
if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
@@ -472,6 +461,13 @@ static void ati_remote_input_report(struct urb *urb)
return;
}
+ if (data[1] != ((data[2] + data[3] + 0xd5) & 0xff)) {
+ dbginfo(&ati_remote->interface->dev,
+ "wrong checksum in input: %02x %02x %02x %02x\n",
+ data[0], data[1], data[2], data[3]);
+ return;
+ }
+
/* Mask unwanted remote channels. */
/* note: remote_num is 0-based, channel 1 on remote == 0 here */
remote_num = (data[3] >> 4) & 0x0f;
@@ -482,31 +478,30 @@ static void ati_remote_input_report(struct urb *urb)
return;
}
- scancode[0] = (((data[1] - ((remote_num + 1) << 4)) & 0xf0) | (data[1] & 0x0f));
-
/*
- * Some devices (e.g. SnapStream Firefly) use 8080 as toggle code,
- * so we have to clear them. The first bit is a bit tricky as the
- * "non-toggled" state depends on remote_num, so we xor it with the
- * second bit which is only used for toggle.
+ * MSB is a toggle code, though only used by some devices
+ * (e.g. SnapStream Firefly)
*/
- scancode[0] ^= (data[2] & 0x80);
-
- scancode[1] = data[2] & ~0x80;
+ scancode = data[2] & 0x7f;
- /* Look up event code index in mouse translation table. */
- index = ati_remote_event_lookup(remote_num, scancode[0], scancode[1]);
+ /* Look up event code index in the mouse translation table. */
+ for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
+ if (scancode == ati_remote_tbl[i].data) {
+ index = i;
+ break;
+ }
+ }
if (index >= 0) {
dbginfo(&ati_remote->interface->dev,
- "channel 0x%02x; mouse data %02x,%02x; index %d; keycode %d\n",
- remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
+ "channel 0x%02x; mouse data %02x; index %d; keycode %d\n",
+ remote_num, data[2], index, ati_remote_tbl[index].code);
if (!dev)
return; /* no mouse device */
} else
dbginfo(&ati_remote->interface->dev,
- "channel 0x%02x; key data %02x,%02x, scancode %02x,%02x\n",
- remote_num, data[1], data[2], scancode[0], scancode[1]);
+ "channel 0x%02x; key data %02x, scancode %02x\n",
+ remote_num, data[2], scancode);
if (index >= 0 && ati_remote_tbl[index].kind == KIND_LITERAL) {
@@ -523,8 +518,7 @@ static void ati_remote_input_report(struct urb *urb)
unsigned long now = jiffies;
/* Filter duplicate events which happen "too close" together. */
- if (ati_remote->old_data[0] == data[1] &&
- ati_remote->old_data[1] == data[2] &&
+ if (ati_remote->old_data == data[2] &&
time_before(now, ati_remote->old_jiffies +
msecs_to_jiffies(repeat_filter))) {
ati_remote->repeat_count++;
@@ -533,8 +527,7 @@ static void ati_remote_input_report(struct urb *urb)
ati_remote->first_jiffies = now;
}
- ati_remote->old_data[0] = data[1];
- ati_remote->old_data[1] = data[2];
+ ati_remote->old_data = data[2];
ati_remote->old_jiffies = now;
/* Ensure we skip at least the 4 first duplicate events (generated
@@ -549,14 +542,13 @@ static void ati_remote_input_report(struct urb *urb)
if (index < 0) {
/* Not a mouse event, hand it to rc-core. */
- u32 rc_code = (scancode[0] << 8) | scancode[1];
/*
* We don't use the rc-core repeat handling yet as
* it would cause ghost repeats which would be a
* regression for this driver.
*/
- rc_keydown_notimeout(ati_remote->rdev, rc_code,
+ rc_keydown_notimeout(ati_remote->rdev, scancode,
data[2]);
rc_keyup(ati_remote->rdev);
return;
@@ -607,8 +599,7 @@ static void ati_remote_input_report(struct urb *urb)
input_sync(dev);
ati_remote->old_jiffies = jiffies;
- ati_remote->old_data[0] = data[1];
- ati_remote->old_data[1] = data[2];
+ ati_remote->old_data = data[2];
}
}
diff --git a/drivers/media/rc/keymaps/rc-ati-x10.c b/drivers/media/rc/keymaps/rc-ati-x10.c
index e1b8b2605c4..81506440ede 100644
--- a/drivers/media/rc/keymaps/rc-ati-x10.c
+++ b/drivers/media/rc/keymaps/rc-ati-x10.c
@@ -27,55 +27,55 @@
#include <media/rc-map.h>
static struct rc_map_table ati_x10[] = {
- { 0xd20d, KEY_1 },
- { 0xd30e, KEY_2 },
- { 0xd40f, KEY_3 },
- { 0xd510, KEY_4 },
- { 0xd611, KEY_5 },
- { 0xd712, KEY_6 },
- { 0xd813, KEY_7 },
- { 0xd914, KEY_8 },
- { 0xda15, KEY_9 },
- { 0xdc17, KEY_0 },
- { 0xc500, KEY_A },
- { 0xc601, KEY_B },
- { 0xde19, KEY_C },
- { 0xe01b, KEY_D },
- { 0xe621, KEY_E },
- { 0xe823, KEY_F },
+ { 0x0d, KEY_1 },
+ { 0x0e, KEY_2 },
+ { 0x0f, KEY_3 },
+ { 0x10, KEY_4 },
+ { 0x11, KEY_5 },
+ { 0x12, KEY_6 },
+ { 0x13, KEY_7 },
+ { 0x14, KEY_8 },
+ { 0x15, KEY_9 },
+ { 0x17, KEY_0 },
+ { 0x00, KEY_A },
+ { 0x01, KEY_B },
+ { 0x19, KEY_C },
+ { 0x1b, KEY_D },
+ { 0x21, KEY_E },
+ { 0x23, KEY_F },
- { 0xdd18, KEY_KPENTER }, /* "check" */
- { 0xdb16, KEY_MENU }, /* "menu" */
- { 0xc702, KEY_POWER }, /* Power */
- { 0xc803, KEY_TV }, /* TV */
- { 0xc904, KEY_DVD }, /* DVD */
- { 0xca05, KEY_WWW }, /* WEB */
- { 0xcb06, KEY_BOOKMARKS }, /* "book" */
- { 0xcc07, KEY_EDIT }, /* "hand" */
- { 0xe11c, KEY_COFFEE }, /* "timer" */
- { 0xe520, KEY_FRONT }, /* "max" */
- { 0xe21d, KEY_LEFT }, /* left */
- { 0xe41f, KEY_RIGHT }, /* right */
- { 0xe722, KEY_DOWN }, /* down */
- { 0xdf1a, KEY_UP }, /* up */
- { 0xe31e, KEY_OK }, /* "OK" */
- { 0xce09, KEY_VOLUMEDOWN }, /* VOL + */
- { 0xcd08, KEY_VOLUMEUP }, /* VOL - */
- { 0xcf0a, KEY_MUTE }, /* MUTE */
- { 0xd00b, KEY_CHANNELUP }, /* CH + */
- { 0xd10c, KEY_CHANNELDOWN },/* CH - */
- { 0xec27, KEY_RECORD }, /* ( o) red */
- { 0xea25, KEY_PLAY }, /* ( >) */
- { 0xe924, KEY_REWIND }, /* (<<) */
- { 0xeb26, KEY_FORWARD }, /* (>>) */
- { 0xed28, KEY_STOP }, /* ([]) */
- { 0xee29, KEY_PAUSE }, /* ('') */
- { 0xf02b, KEY_PREVIOUS }, /* (<-) */
- { 0xef2a, KEY_NEXT }, /* (>+) */
- { 0xf22d, KEY_INFO }, /* PLAYING */
- { 0xf32e, KEY_HOME }, /* TOP */
- { 0xf42f, KEY_END }, /* END */
- { 0xf530, KEY_SELECT }, /* SELECT */
+ { 0x18, KEY_KPENTER }, /* "check" */
+ { 0x16, KEY_MENU }, /* "menu" */
+ { 0x02, KEY_POWER }, /* Power */
+ { 0x03, KEY_TV }, /* TV */
+ { 0x04, KEY_DVD }, /* DVD */
+ { 0x05, KEY_WWW }, /* WEB */
+ { 0x06, KEY_BOOKMARKS }, /* "book" */
+ { 0x07, KEY_EDIT }, /* "hand" */
+ { 0x1c, KEY_COFFEE }, /* "timer" */
+ { 0x20, KEY_FRONT }, /* "max" */
+ { 0x1d, KEY_LEFT }, /* left */
+ { 0x1f, KEY_RIGHT }, /* right */
+ { 0x22, KEY_DOWN }, /* down */
+ { 0x1a, KEY_UP }, /* up */
+ { 0x1e, KEY_OK }, /* "OK" */
+ { 0x09, KEY_VOLUMEDOWN }, /* VOL + */
+ { 0x08, KEY_VOLUMEUP }, /* VOL - */
+ { 0x0a, KEY_MUTE }, /* MUTE */
+ { 0x0b, KEY_CHANNELUP }, /* CH + */
+ { 0x0c, KEY_CHANNELDOWN },/* CH - */
+ { 0x27, KEY_RECORD }, /* ( o) red */
+ { 0x25, KEY_PLAY }, /* ( >) */
+ { 0x24, KEY_REWIND }, /* (<<) */
+ { 0x26, KEY_FORWARD }, /* (>>) */
+ { 0x28, KEY_STOP }, /* ([]) */
+ { 0x29, KEY_PAUSE }, /* ('') */
+ { 0x2b, KEY_PREVIOUS }, /* (<-) */
+ { 0x2a, KEY_NEXT }, /* (>+) */
+ { 0x2d, KEY_INFO }, /* PLAYING */
+ { 0x2e, KEY_HOME }, /* TOP */
+ { 0x2f, KEY_END }, /* END */
+ { 0x30, KEY_SELECT }, /* SELECT */
};
static struct rc_map_list ati_x10_map = {
diff --git a/drivers/media/rc/keymaps/rc-medion-x10.c b/drivers/media/rc/keymaps/rc-medion-x10.c
index 09e2cc01d11..479cdb89781 100644
--- a/drivers/media/rc/keymaps/rc-medion-x10.c
+++ b/drivers/media/rc/keymaps/rc-medion-x10.c
@@ -25,70 +25,70 @@
#include <media/rc-map.h>
static struct rc_map_table medion_x10[] = {
- { 0xf12c, KEY_TV }, /* TV */
- { 0xf22d, KEY_VCR }, /* VCR */
- { 0xc904, KEY_DVD }, /* DVD */
- { 0xcb06, KEY_AUDIO }, /* MUSIC */
-
- { 0xf32e, KEY_RADIO }, /* RADIO */
- { 0xca05, KEY_DIRECTORY }, /* PHOTO */
- { 0xf42f, KEY_INFO }, /* TV-PREVIEW */
- { 0xf530, KEY_LIST }, /* CHANNEL-LST */
-
- { 0xe01b, KEY_SETUP }, /* SETUP */
- { 0xf631, KEY_VIDEO }, /* VIDEO DESKTOP */
-
- { 0xcd08, KEY_VOLUMEDOWN }, /* VOL - */
- { 0xce09, KEY_VOLUMEUP }, /* VOL + */
- { 0xd00b, KEY_CHANNELUP }, /* CHAN + */
- { 0xd10c, KEY_CHANNELDOWN }, /* CHAN - */
- { 0xc500, KEY_MUTE }, /* MUTE */
-
- { 0xf732, KEY_RED }, /* red */
- { 0xf833, KEY_GREEN }, /* green */
- { 0xf934, KEY_YELLOW }, /* yellow */
- { 0xfa35, KEY_BLUE }, /* blue */
- { 0xdb16, KEY_TEXT }, /* TXT */
-
- { 0xd20d, KEY_1 },
- { 0xd30e, KEY_2 },
- { 0xd40f, KEY_3 },
- { 0xd510, KEY_4 },
- { 0xd611, KEY_5 },
- { 0xd712, KEY_6 },
- { 0xd813, KEY_7 },
- { 0xd914, KEY_8 },
- { 0xda15, KEY_9 },
- { 0xdc17, KEY_0 },
- { 0xe11c, KEY_SEARCH }, /* TV/RAD, CH SRC */
- { 0xe520, KEY_DELETE }, /* DELETE */
-
- { 0xfb36, KEY_KEYBOARD }, /* RENAME */
- { 0xdd18, KEY_SCREEN }, /* SNAPSHOT */
-
- { 0xdf1a, KEY_UP }, /* up */
- { 0xe722, KEY_DOWN }, /* down */
- { 0xe21d, KEY_LEFT }, /* left */
- { 0xe41f, KEY_RIGHT }, /* right */
- { 0xe31e, KEY_OK }, /* OK */
-
- { 0xfc37, KEY_SELECT }, /* ACQUIRE IMAGE */
- { 0xfd38, KEY_EDIT }, /* EDIT IMAGE */
-
- { 0xe924, KEY_REWIND }, /* rewind (<<) */
- { 0xea25, KEY_PLAY }, /* play ( >) */
- { 0xeb26, KEY_FORWARD }, /* forward (>>) */
- { 0xec27, KEY_RECORD }, /* record ( o) */
- { 0xed28, KEY_STOP }, /* stop ([]) */
- { 0xee29, KEY_PAUSE }, /* pause ('') */
-
- { 0xe621, KEY_PREVIOUS }, /* prev */
- { 0xfe39, KEY_SWITCHVIDEOMODE }, /* F SCR */
- { 0xe823, KEY_NEXT }, /* next */
- { 0xde19, KEY_MENU }, /* MENU */
- { 0xff3a, KEY_LANGUAGE }, /* AUDIO */
-
- { 0xc702, KEY_POWER }, /* POWER */
+ { 0x2c, KEY_TV }, /* TV */
+ { 0x2d, KEY_VCR }, /* VCR */
+ { 0x04, KEY_DVD }, /* DVD */
+ { 0x06, KEY_AUDIO }, /* MUSIC */
+
+ { 0x2e, KEY_RADIO }, /* RADIO */
+ { 0x05, KEY_DIRECTORY }, /* PHOTO */
+ { 0x2f, KEY_INFO }, /* TV-PREVIEW */
+ { 0x30, KEY_LIST }, /* CHANNEL-LST */
+
+ { 0x1b, KEY_SETUP }, /* SETUP */
+ { 0x31, KEY_VIDEO }, /* VIDEO DESKTOP */
+
+ { 0x08, KEY_VOLUMEDOWN }, /* VOL - */
+ { 0x09, KEY_VOLUMEUP }, /* VOL + */
+ { 0x0b, KEY_CHANNELUP }, /* CHAN + */
+ { 0x0c, KEY_CHANNELDOWN }, /* CHAN - */
+ { 0x00, KEY_MUTE }, /* MUTE */
+
+ { 0x32, KEY_RED }, /* red */
+ { 0x33, KEY_GREEN }, /* green */
+ { 0x34, KEY_YELLOW }, /* yellow */
+ { 0x35, KEY_BLUE }, /* blue */
+ { 0x16, KEY_TEXT }, /* TXT */
+
+ { 0x0d, KEY_1 },
+ { 0x0e, KEY_2 },
+ { 0x0f, KEY_3 },
+ { 0x10, KEY_4 },
+ { 0x11, KEY_5 },
+ { 0x12, KEY_6 },
+ { 0x13, KEY_7 },
+ { 0x14, KEY_8 },
+ { 0x15, KEY_9 },
+ { 0x17, KEY_0 },
+ { 0x1c, KEY_SEARCH }, /* TV/RAD, CH SRC */
+ { 0x20, KEY_DELETE }, /* DELETE */
+
+ { 0x36, KEY_KEYBOARD }, /* RENAME */
+ { 0x18, KEY_SCREEN }, /* SNAPSHOT */
+
+ { 0x1a, KEY_UP }, /* up */
+ { 0x22, KEY_DOWN }, /* down */
+ { 0x1d, KEY_LEFT }, /* left */
+ { 0x1f, KEY_RIGHT }, /* right */
+ { 0x1e, KEY_OK }, /* OK */
+
+ { 0x37, KEY_SELECT }, /* ACQUIRE IMAGE */
+ { 0x38, KEY_EDIT }, /* EDIT IMAGE */
+
+ { 0x24, KEY_REWIND }, /* rewind (<<) */
+ { 0x25, KEY_PLAY }, /* play ( >) */
+ { 0x26, KEY_FORWARD }, /* forward (>>) */
+ { 0x27, KEY_RECORD }, /* record ( o) */
+ { 0x28, KEY_STOP }, /* stop ([]) */
+ { 0x29, KEY_PAUSE }, /* pause ('') */
+
+ { 0x21, KEY_PREVIOUS }, /* prev */
+ { 0x39, KEY_SWITCHVIDEOMODE }, /* F SCR */
+ { 0x23, KEY_NEXT }, /* next */
+ { 0x19, KEY_MENU }, /* MENU */
+ { 0x3a, KEY_LANGUAGE }, /* AUDIO */
+
+ { 0x02, KEY_POWER }, /* POWER */
};
static struct rc_map_list medion_x10_map = {
diff --git a/drivers/media/rc/keymaps/rc-snapstream-firefly.c b/drivers/media/rc/keymaps/rc-snapstream-firefly.c
index ef146520931..c7f33ec719b 100644
--- a/drivers/media/rc/keymaps/rc-snapstream-firefly.c
+++ b/drivers/media/rc/keymaps/rc-snapstream-firefly.c
@@ -22,63 +22,63 @@
#include <media/rc-map.h>
static struct rc_map_table snapstream_firefly[] = {
- { 0xf12c, KEY_ZOOM }, /* Maximize */
- { 0xc702, KEY_CLOSE },
-
- { 0xd20d, KEY_1 },
- { 0xd30e, KEY_2 },
- { 0xd40f, KEY_3 },
- { 0xd510, KEY_4 },
- { 0xd611, KEY_5 },
- { 0xd712, KEY_6 },
- { 0xd813, KEY_7 },
- { 0xd914, KEY_8 },
- { 0xda15, KEY_9 },
- { 0xdc17, KEY_0 },
- { 0xdb16, KEY_BACK },
- { 0xdd18, KEY_KPENTER }, /* ent */
-
- { 0xce09, KEY_VOLUMEUP },
- { 0xcd08, KEY_VOLUMEDOWN },
- { 0xcf0a, KEY_MUTE },
- { 0xd00b, KEY_CHANNELUP },
- { 0xd10c, KEY_CHANNELDOWN },
- { 0xc500, KEY_VENDOR }, /* firefly */
-
- { 0xf32e, KEY_INFO },
- { 0xf42f, KEY_OPTION },
-
- { 0xe21d, KEY_LEFT },
- { 0xe41f, KEY_RIGHT },
- { 0xe722, KEY_DOWN },
- { 0xdf1a, KEY_UP },
- { 0xe31e, KEY_OK },
-
- { 0xe11c, KEY_MENU },
- { 0xe520, KEY_EXIT },
-
- { 0xec27, KEY_RECORD },
- { 0xea25, KEY_PLAY },
- { 0xed28, KEY_STOP },
- { 0xe924, KEY_REWIND },
- { 0xeb26, KEY_FORWARD },
- { 0xee29, KEY_PAUSE },
- { 0xf02b, KEY_PREVIOUS },
- { 0xef2a, KEY_NEXT },
-
- { 0xcb06, KEY_AUDIO }, /* Music */
- { 0xca05, KEY_IMAGES }, /* Photos */
- { 0xc904, KEY_DVD },
- { 0xc803, KEY_TV },
- { 0xcc07, KEY_VIDEO },
-
- { 0xc601, KEY_HELP },
- { 0xf22d, KEY_MODE }, /* Mouse */
-
- { 0xde19, KEY_A },
- { 0xe01b, KEY_B },
- { 0xe621, KEY_C },
- { 0xe823, KEY_D },
+ { 0x2c, KEY_ZOOM }, /* Maximize */
+ { 0x02, KEY_CLOSE },
+
+ { 0x0d, KEY_1 },
+ { 0x0e, KEY_2 },
+ { 0x0f, KEY_3 },
+ { 0x10, KEY_4 },
+ { 0x11, KEY_5 },
+ { 0x12, KEY_6 },
+ { 0x13, KEY_7 },
+ { 0x14, KEY_8 },
+ { 0x15, KEY_9 },
+ { 0x17, KEY_0 },
+ { 0x16, KEY_BACK },
+ { 0x18, KEY_KPENTER }, /* ent */
+
+ { 0x09, KEY_VOLUMEUP },
+ { 0x08, KEY_VOLUMEDOWN },
+ { 0x0a, KEY_MUTE },
+ { 0x0b, KEY_CHANNELUP },
+ { 0x0c, KEY_CHANNELDOWN },
+ { 0x00, KEY_VENDOR }, /* firefly */
+
+ { 0x2e, KEY_INFO },
+ { 0x2f, KEY_OPTION },
+
+ { 0x1d, KEY_LEFT },
+ { 0x1f, KEY_RIGHT },
+ { 0x22, KEY_DOWN },
+ { 0x1a, KEY_UP },
+ { 0x1e, KEY_OK },
+
+ { 0x1c, KEY_MENU },
+ { 0x20, KEY_EXIT },
+
+ { 0x27, KEY_RECORD },
+ { 0x25, KEY_PLAY },
+ { 0x28, KEY_STOP },
+ { 0x24, KEY_REWIND },
+ { 0x26, KEY_FORWARD },
+ { 0x29, KEY_PAUSE },
+ { 0x2b, KEY_PREVIOUS },
+ { 0x2a, KEY_NEXT },
+
+ { 0x06, KEY_AUDIO }, /* Music */
+ { 0x05, KEY_IMAGES }, /* Photos */
+ { 0x04, KEY_DVD },
+ { 0x03, KEY_TV },
+ { 0x07, KEY_VIDEO },
+
+ { 0x01, KEY_HELP },
+ { 0x2d, KEY_MODE }, /* Mouse */
+
+ { 0x19, KEY_A },
+ { 0x1b, KEY_B },
+ { 0x21, KEY_C },
+ { 0x23, KEY_D },
};
static struct rc_map_list snapstream_firefly_map = {
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 39fc923fc46..1c6015a04f9 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -162,11 +162,14 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
switch (tv.model) {
case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+ case 72101: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+ case 72201: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+ case 72261: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and analog video */
case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
break;
@@ -324,6 +327,10 @@ struct usb_device_id au0828_usb_id_table[] = {
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
{ USB_DEVICE(0x2040, 0x8200),
.driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
+ { USB_DEVICE(0x2040, 0x7260),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+ { USB_DEVICE(0x2040, 0x7213),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
{ },
};
diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h
index 10550bd93b0..25036cb11be 100644
--- a/drivers/media/video/davinci/vpif.h
+++ b/drivers/media/video/davinci/vpif.h
@@ -20,6 +20,7 @@
#include <linux/videodev2.h>
#include <mach/hardware.h>
#include <mach/dm646x.h>
+#include <media/davinci/vpif_types.h>
/* Maximum channel allowed */
#define VPIF_NUM_CHANNELS (4)
diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h
index 064550f5ce4..a693d4ebda5 100644
--- a/drivers/media/video/davinci/vpif_capture.h
+++ b/drivers/media/video/davinci/vpif_capture.h
@@ -27,7 +27,7 @@
#include <media/v4l2-device.h>
#include <media/videobuf-core.h>
#include <media/videobuf-dma-contig.h>
-#include <mach/dm646x.h>
+#include <media/davinci/vpif_types.h>
#include "vpif.h"
diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h
index 5d1936dafed..56879d1a068 100644
--- a/drivers/media/video/davinci/vpif_display.h
+++ b/drivers/media/video/davinci/vpif_display.h
@@ -22,6 +22,7 @@
#include <media/v4l2-device.h>
#include <media/videobuf-core.h>
#include <media/videobuf-dma-contig.h>
+#include <media/davinci/vpif_types.h>
#include "vpif.h"
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 881e04c7ffe..2ca10dfec91 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -838,13 +838,13 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
gspca_dev->usb_err = 0;
/* do the specific subdriver stuff before endpoint selection */
- gspca_dev->alt = 0;
+ intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface);
+ gspca_dev->alt = gspca_dev->cam.bulk ? intf->num_altsetting : 0;
if (gspca_dev->sd_desc->isoc_init) {
ret = gspca_dev->sd_desc->isoc_init(gspca_dev);
if (ret < 0)
goto unlock;
}
- intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface);
xfer = gspca_dev->cam.bulk ? USB_ENDPOINT_XFER_BULK
: USB_ENDPOINT_XFER_ISOC;
@@ -957,7 +957,7 @@ retry:
ret = -EIO;
goto out;
}
- alt = ep_tb[--alt_idx].alt;
+ gspca_dev->alt = ep_tb[--alt_idx].alt;
}
}
out:
diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h
index 89d09a8914f..82c8817bd32 100644
--- a/drivers/media/video/m5mols/m5mols.h
+++ b/drivers/media/video/m5mols/m5mols.h
@@ -162,7 +162,6 @@ struct m5mols_version {
* @pad: media pad
* @ffmt: current fmt according to resolution type
* @res_type: current resolution type
- * @code: current code
* @irq_waitq: waitqueue for the capture
* @work_irq: workqueue for the IRQ
* @flags: state variable for the interrupt handler
@@ -192,7 +191,6 @@ struct m5mols_info {
struct media_pad pad;
struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX];
int res_type;
- enum v4l2_mbus_pixelcode code;
wait_queue_head_t irq_waitq;
struct work_struct work_irq;
unsigned long flags;
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index 05ab3700647..e0f09e53180 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -334,7 +334,7 @@ int m5mols_mode(struct m5mols_info *info, u8 mode)
int ret = -EINVAL;
u8 reg;
- if (mode < REG_PARAMETER && mode > REG_CAPTURE)
+ if (mode < REG_PARAMETER || mode > REG_CAPTURE)
return ret;
ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, &reg);
@@ -511,9 +511,6 @@ static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
struct m5mols_info *info = to_m5mols(sd);
struct v4l2_mbus_framefmt *format;
- if (fmt->pad != 0)
- return -EINVAL;
-
format = __find_format(info, fh, fmt->which, info->res_type);
if (!format)
return -EINVAL;
@@ -532,9 +529,6 @@ static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
u32 resolution = 0;
int ret;
- if (fmt->pad != 0)
- return -EINVAL;
-
ret = __find_resolution(sd, format, &type, &resolution);
if (ret < 0)
return ret;
@@ -543,13 +537,14 @@ static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
if (!sfmt)
return 0;
- *sfmt = m5mols_default_ffmt[type];
- sfmt->width = format->width;
- sfmt->height = format->height;
+
+ format->code = m5mols_default_ffmt[type].code;
+ format->colorspace = V4L2_COLORSPACE_JPEG;
+ format->field = V4L2_FIELD_NONE;
if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+ *sfmt = *format;
info->resolution = resolution;
- info->code = format->code;
info->res_type = type;
}
@@ -626,13 +621,14 @@ static int m5mols_start_monitor(struct m5mols_info *info)
static int m5mols_s_stream(struct v4l2_subdev *sd, int enable)
{
struct m5mols_info *info = to_m5mols(sd);
+ u32 code = info->ffmt[info->res_type].code;
if (enable) {
int ret = -EINVAL;
- if (is_code(info->code, M5MOLS_RESTYPE_MONITOR))
+ if (is_code(code, M5MOLS_RESTYPE_MONITOR))
ret = m5mols_start_monitor(info);
- if (is_code(info->code, M5MOLS_RESTYPE_CAPTURE))
+ if (is_code(code, M5MOLS_RESTYPE_CAPTURE))
ret = m5mols_start_capture(info);
return ret;
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index cf2c0fb95f2..398f96ffd35 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -955,6 +955,7 @@ static int mt9m111_probe(struct i2c_client *client,
mt9m111->rect.height = MT9M111_MAX_HEIGHT;
mt9m111->fmt = &mt9m111_colour_fmts[0];
mt9m111->lastpage = -1;
+ mutex_init(&mt9m111->power_lock);
ret = mt9m111_video_probe(client);
if (ret) {
diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
index 32114a3c0ca..7b34b11daf2 100644
--- a/drivers/media/video/mt9t112.c
+++ b/drivers/media/video/mt9t112.c
@@ -1083,8 +1083,10 @@ static int mt9t112_probe(struct i2c_client *client,
v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops);
ret = mt9t112_camera_probe(client);
- if (ret)
+ if (ret) {
kfree(priv);
+ return ret;
+ }
/* Cannot fail: using the default supported pixel code */
mt9t112_set_params(priv, &rect, V4L2_MBUS_FMT_UYVY8_2X8);
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 9c5c19f142d..ee0d0b39cd1 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -38,6 +38,7 @@
#include <linux/irq.h>
#include <linux/videodev2.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <media/videobuf-dma-contig.h>
#include <media/v4l2-device.h>
@@ -2169,6 +2170,14 @@ static int __init omap_vout_probe(struct platform_device *pdev)
vid_dev->num_displays = 0;
for_each_dss_dev(dssdev) {
omap_dss_get_device(dssdev);
+
+ if (!dssdev->driver) {
+ dev_warn(&pdev->dev, "no driver for display: %s\n",
+ dssdev->name);
+ omap_dss_put_device(dssdev);
+ continue;
+ }
+
vid_dev->displays[vid_dev->num_displays++] = dssdev;
}
diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index e87ae2f634b..6a6cf388bae 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -24,6 +24,7 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
diff --git a/drivers/media/video/omap24xxcam-dma.c b/drivers/media/video/omap24xxcam-dma.c
index 1d54b86c936..3ea38a8def8 100644
--- a/drivers/media/video/omap24xxcam-dma.c
+++ b/drivers/media/video/omap24xxcam-dma.c
@@ -506,7 +506,7 @@ int omap24xxcam_sgdma_queue(struct omap24xxcam_sgdma *sgdma,
unsigned long flags;
struct sgdma_state *sg_state;
- if ((sglen < 0) || ((sglen > 0) & !sglist))
+ if ((sglen < 0) || ((sglen > 0) && !sglist))
return -EINVAL;
spin_lock_irqsave(&sgdma->lock, flags);
diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index b0b0fa5a357..54a4a3f22e2 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -1408,7 +1408,7 @@ static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
{
struct isp_pipeline *pipe =
to_isp_pipeline(&ccdc->video_out.video.entity);
- struct video_device *vdev = &ccdc->subdev.devnode;
+ struct video_device *vdev = ccdc->subdev.devnode;
struct v4l2_event event;
memset(&event, 0, sizeof(event));
diff --git a/drivers/media/video/omap3isp/ispstat.c b/drivers/media/video/omap3isp/ispstat.c
index 68d539456c5..bc0b2c7349b 100644
--- a/drivers/media/video/omap3isp/ispstat.c
+++ b/drivers/media/video/omap3isp/ispstat.c
@@ -496,7 +496,7 @@ static int isp_stat_bufs_alloc(struct ispstat *stat, u32 size)
static void isp_stat_queue_event(struct ispstat *stat, int err)
{
- struct video_device *vdev = &stat->subdev.devnode;
+ struct video_device *vdev = stat->subdev.devnode;
struct v4l2_event event;
struct omap3isp_stat_event_status *status = (void *)event.u.data;
diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index d1000723c5a..f2290578448 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -26,6 +26,7 @@
#include <asm/cacheflush.h>
#include <linux/clk.h>
#include <linux/mm.h>
+#include <linux/module.h>
#include <linux/pagemap.h>
#include <linux/scatterlist.h>
#include <linux/sched.h>
diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c
index 9f2d26b1d4c..6806345ec2f 100644
--- a/drivers/media/video/ov6650.c
+++ b/drivers/media/video/ov6650.c
@@ -540,7 +540,7 @@ static u8 to_clkrc(struct v4l2_fract *timeperframe,
static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id;
+ struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd);
struct soc_camera_sense *sense = icd->sense;
struct ov6650 *priv = to_ov6650(client);
bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect);
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index c8d91b0cd9b..2cc3b916672 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -98,6 +98,10 @@ static int fimc_capture_state_cleanup(struct fimc_dev *fimc, bool suspend)
vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
}
set_bit(ST_CAPT_SUSPENDED, &fimc->state);
+
+ fimc_hw_reset(fimc);
+ cap->buf_index = 0;
+
spin_unlock_irqrestore(&fimc->slock, flags);
if (streaming)
@@ -137,7 +141,7 @@ int fimc_capture_config_update(struct fimc_ctx *ctx)
struct fimc_dev *fimc = ctx->fimc_dev;
int ret;
- if (test_bit(ST_CAPT_APPLY_CFG, &fimc->state))
+ if (!test_bit(ST_CAPT_APPLY_CFG, &fimc->state))
return 0;
spin_lock(&ctx->slock);
@@ -150,7 +154,7 @@ int fimc_capture_config_update(struct fimc_ctx *ctx)
fimc_hw_set_rotation(ctx);
fimc_prepare_dma_offset(ctx, &ctx->d_frame);
fimc_hw_set_out_dma(ctx);
- set_bit(ST_CAPT_APPLY_CFG, &fimc->state);
+ clear_bit(ST_CAPT_APPLY_CFG, &fimc->state);
}
spin_unlock(&ctx->slock);
return ret;
@@ -164,7 +168,6 @@ static int start_streaming(struct vb2_queue *q, unsigned int count)
int min_bufs;
int ret;
- fimc_hw_reset(fimc);
vid_cap->frame_count = 0;
ret = fimc_init_capture(fimc);
@@ -523,7 +526,7 @@ static struct fimc_fmt *fimc_capture_try_format(struct fimc_ctx *ctx,
max_w = rotation ? pl->out_rot_en_w : pl->out_rot_dis_w;
min_w = ctx->state & FIMC_DST_CROP ? dst->width : var->min_out_pixsize;
min_h = ctx->state & FIMC_DST_CROP ? dst->height : var->min_out_pixsize;
- if (fimc->id == 1 && var->pix_hoff)
+ if (var->min_vsize_align == 1 && !rotation)
align_h = fimc_fmt_is_rgb(ffmt->color) ? 0 : 1;
depth = fimc_get_format_depth(ffmt);
@@ -1239,6 +1242,7 @@ static int fimc_subdev_set_fmt(struct v4l2_subdev *sd,
mutex_lock(&fimc->lock);
set_frame_bounds(ff, mf->width, mf->height);
+ fimc->vid_cap.mf = *mf;
ff->fmt = ffmt;
/* Reset the crop rectangle if required. */
@@ -1375,7 +1379,7 @@ static void fimc_destroy_capture_subdev(struct fimc_dev *fimc)
media_entity_cleanup(&sd->entity);
v4l2_device_unregister_subdev(sd);
kfree(sd);
- sd = NULL;
+ fimc->vid_cap.subdev = NULL;
}
/* Set default format at the sensor and host interface */
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index 19ca6db38b2..07c6254faee 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -37,7 +37,7 @@ static char *fimc_clocks[MAX_FIMC_CLOCKS] = {
static struct fimc_fmt fimc_formats[] = {
{
.name = "RGB565",
- .fourcc = V4L2_PIX_FMT_RGB565X,
+ .fourcc = V4L2_PIX_FMT_RGB565,
.depth = { 16 },
.color = S5P_FIMC_RGB565,
.memplanes = 1,
@@ -1038,12 +1038,11 @@ static int fimc_try_fmt_mplane(struct fimc_ctx *ctx, struct v4l2_format *f)
mod_x = 6; /* 64 x 32 pixels tile */
mod_y = 5;
} else {
- if (fimc->id == 1 && variant->pix_hoff)
+ if (variant->min_vsize_align == 1)
mod_y = fimc_fmt_is_rgb(fmt->color) ? 0 : 1;
else
- mod_y = mod_x;
+ mod_y = ffs(variant->min_vsize_align) - 1;
}
- dbg("mod_x: %d, mod_y: %d, max_w: %d", mod_x, mod_y, max_w);
v4l_bound_align_image(&pix->width, 16, max_w, mod_x,
&pix->height, 8, variant->pix_limit->scaler_dis_w, mod_y, 0);
@@ -1226,10 +1225,10 @@ static int fimc_m2m_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr)
fimc->variant->min_inp_pixsize : fimc->variant->min_out_pixsize;
/* Get pixel alignment constraints. */
- if (fimc->id == 1 && fimc->variant->pix_hoff)
+ if (fimc->variant->min_vsize_align == 1)
halign = fimc_fmt_is_rgb(f->fmt->color) ? 0 : 1;
else
- halign = ffs(min_size) - 1;
+ halign = ffs(fimc->variant->min_vsize_align) - 1;
for (i = 0; i < f->fmt->colplanes; i++)
depth += f->fmt->depth[i];
@@ -1615,7 +1614,6 @@ static int fimc_probe(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
fimc->pdata = pdata;
- set_bit(ST_LPM, &fimc->state);
init_waitqueue_head(&fimc->irq_queue);
spin_lock_init(&fimc->slock);
@@ -1707,8 +1705,6 @@ static int fimc_runtime_resume(struct device *dev)
/* Enable clocks and perform basic initalization */
clk_enable(fimc->clock[CLK_GATE]);
fimc_hw_reset(fimc);
- if (fimc->variant->out_buf_count > 4)
- fimc_hw_set_dma_seq(fimc, 0xF);
/* Resume the capture or mem-to-mem device */
if (fimc_capture_busy(fimc))
@@ -1750,8 +1746,6 @@ static int fimc_resume(struct device *dev)
return 0;
}
fimc_hw_reset(fimc);
- if (fimc->variant->out_buf_count > 4)
- fimc_hw_set_dma_seq(fimc, 0xF);
spin_unlock_irqrestore(&fimc->slock, flags);
if (fimc_capture_busy(fimc))
@@ -1780,7 +1774,6 @@ static int __devexit fimc_remove(struct platform_device *pdev)
struct fimc_dev *fimc = platform_get_drvdata(pdev);
pm_runtime_disable(&pdev->dev);
- fimc_runtime_suspend(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx);
@@ -1840,6 +1833,7 @@ static struct samsung_fimc_variant fimc0_variant_s5p = {
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 8,
+ .min_vsize_align = 16,
.out_buf_count = 4,
.pix_limit = &s5p_pix_limit[0],
};
@@ -1849,6 +1843,7 @@ static struct samsung_fimc_variant fimc2_variant_s5p = {
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 8,
+ .min_vsize_align = 16,
.out_buf_count = 4,
.pix_limit = &s5p_pix_limit[1],
};
@@ -1861,6 +1856,7 @@ static struct samsung_fimc_variant fimc0_variant_s5pv210 = {
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 8,
+ .min_vsize_align = 16,
.out_buf_count = 4,
.pix_limit = &s5p_pix_limit[1],
};
@@ -1874,6 +1870,7 @@ static struct samsung_fimc_variant fimc1_variant_s5pv210 = {
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 1,
+ .min_vsize_align = 1,
.out_buf_count = 4,
.pix_limit = &s5p_pix_limit[2],
};
@@ -1884,6 +1881,7 @@ static struct samsung_fimc_variant fimc2_variant_s5pv210 = {
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 8,
+ .min_vsize_align = 16,
.out_buf_count = 4,
.pix_limit = &s5p_pix_limit[2],
};
@@ -1898,6 +1896,7 @@ static struct samsung_fimc_variant fimc0_variant_exynos4 = {
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 2,
+ .min_vsize_align = 1,
.out_buf_count = 32,
.pix_limit = &s5p_pix_limit[1],
};
@@ -1910,6 +1909,7 @@ static struct samsung_fimc_variant fimc3_variant_exynos4 = {
.min_inp_pixsize = 16,
.min_out_pixsize = 16,
.hor_offs_align = 2,
+ .min_vsize_align = 1,
.out_buf_count = 32,
.pix_limit = &s5p_pix_limit[3],
};
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
index a6936dad5b1..c7f01c47b20 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.h
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -377,6 +377,7 @@ struct fimc_pix_limit {
* @min_inp_pixsize: minimum input pixel size
* @min_out_pixsize: minimum output pixel size
* @hor_offs_align: horizontal pixel offset aligment
+ * @min_vsize_align: minimum vertical pixel size alignment
* @out_buf_count: the number of buffers in output DMA sequence
*/
struct samsung_fimc_variant {
@@ -390,6 +391,7 @@ struct samsung_fimc_variant {
u16 min_inp_pixsize;
u16 min_out_pixsize;
u16 hor_offs_align;
+ u16 min_vsize_align;
u16 out_buf_count;
};
diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/video/s5p-fimc/fimc-mdevice.c
index cc337b1de91..615c862f036 100644
--- a/drivers/media/video/s5p-fimc/fimc-mdevice.c
+++ b/drivers/media/video/s5p-fimc/fimc-mdevice.c
@@ -220,6 +220,7 @@ static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd,
sd = v4l2_i2c_new_subdev_board(&fmd->v4l2_dev, adapter,
s_info->pdata->board_info, NULL);
if (IS_ERR_OR_NULL(sd)) {
+ i2c_put_adapter(adapter);
v4l2_err(&fmd->v4l2_dev, "Failed to acquire subdev\n");
return NULL;
}
@@ -234,12 +235,15 @@ static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd,
static void fimc_md_unregister_sensor(struct v4l2_subdev *sd)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct i2c_adapter *adapter;
if (!client)
return;
v4l2_device_unregister_subdev(sd);
+ adapter = client->adapter;
i2c_unregister_device(client);
- i2c_put_adapter(client->adapter);
+ if (adapter)
+ i2c_put_adapter(adapter);
}
static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
@@ -381,20 +385,28 @@ static void fimc_md_unregister_entities(struct fimc_md *fmd)
static int fimc_md_register_video_nodes(struct fimc_md *fmd)
{
+ struct video_device *vdev;
int i, ret = 0;
for (i = 0; i < FIMC_MAX_DEVS && !ret; i++) {
if (!fmd->fimc[i])
continue;
- if (fmd->fimc[i]->m2m.vfd)
- ret = video_register_device(fmd->fimc[i]->m2m.vfd,
- VFL_TYPE_GRABBER, -1);
- if (ret)
- break;
- if (fmd->fimc[i]->vid_cap.vfd)
- ret = video_register_device(fmd->fimc[i]->vid_cap.vfd,
- VFL_TYPE_GRABBER, -1);
+ vdev = fmd->fimc[i]->m2m.vfd;
+ if (vdev) {
+ ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
+ if (ret)
+ break;
+ v4l2_info(&fmd->v4l2_dev, "Registered %s as /dev/%s\n",
+ vdev->name, video_device_node_name(vdev));
+ }
+
+ vdev = fmd->fimc[i]->vid_cap.vfd;
+ if (vdev == NULL)
+ continue;
+ ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
+ v4l2_info(&fmd->v4l2_dev, "Registered %s as /dev/%s\n",
+ vdev->name, video_device_node_name(vdev));
}
return ret;
@@ -502,7 +514,7 @@ static int fimc_md_create_links(struct fimc_md *fmd)
if (WARN(csis == NULL,
"MIPI-CSI interface specified "
"but s5p-csis module is not loaded!\n"))
- continue;
+ return -EINVAL;
ret = media_entity_create_link(&sensor->entity, 0,
&csis->entity, CSIS_PAD_SINK,
@@ -742,9 +754,6 @@ static int __devinit fimc_md_probe(struct platform_device *pdev)
struct fimc_md *fmd;
int ret;
- if (WARN(!pdev->dev.platform_data, "Platform data not specified!\n"))
- return -EINVAL;
-
fmd = kzalloc(sizeof(struct fimc_md), GFP_KERNEL);
if (!fmd)
return -ENOMEM;
@@ -782,9 +791,11 @@ static int __devinit fimc_md_probe(struct platform_device *pdev)
if (ret)
goto err3;
- ret = fimc_md_register_sensor_entities(fmd);
- if (ret)
- goto err3;
+ if (pdev->dev.platform_data) {
+ ret = fimc_md_register_sensor_entities(fmd);
+ if (ret)
+ goto err3;
+ }
ret = fimc_md_create_links(fmd);
if (ret)
goto err3;
diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c b/drivers/media/video/s5p-fimc/fimc-reg.c
index 20e664e3416..44f5c2d1920 100644
--- a/drivers/media/video/s5p-fimc/fimc-reg.c
+++ b/drivers/media/video/s5p-fimc/fimc-reg.c
@@ -35,6 +35,9 @@ void fimc_hw_reset(struct fimc_dev *dev)
cfg = readl(dev->regs + S5P_CIGCTRL);
cfg &= ~S5P_CIGCTRL_SWRST;
writel(cfg, dev->regs + S5P_CIGCTRL);
+
+ if (dev->variant->out_buf_count > 4)
+ fimc_hw_set_dma_seq(dev, 0xF);
}
static u32 fimc_hw_get_in_flip(struct fimc_ctx *ctx)
@@ -251,7 +254,14 @@ static void fimc_hw_set_scaler(struct fimc_ctx *ctx)
struct fimc_scaler *sc = &ctx->scaler;
struct fimc_frame *src_frame = &ctx->s_frame;
struct fimc_frame *dst_frame = &ctx->d_frame;
- u32 cfg = 0;
+
+ u32 cfg = readl(dev->regs + S5P_CISCCTRL);
+
+ cfg &= ~(S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE |
+ S5P_CISCCTRL_SCALEUP_H | S5P_CISCCTRL_SCALEUP_V |
+ S5P_CISCCTRL_SCALERBYPASS | S5P_CISCCTRL_ONE2ONE |
+ S5P_CISCCTRL_INRGB_FMT_MASK | S5P_CISCCTRL_OUTRGB_FMT_MASK |
+ S5P_CISCCTRL_INTERLACE | S5P_CISCCTRL_RGB_EXT);
if (!(ctx->flags & FIMC_COLOR_RANGE_NARROW))
cfg |= (S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE);
@@ -308,9 +318,9 @@ void fimc_hw_set_mainscaler(struct fimc_ctx *ctx)
fimc_hw_set_scaler(ctx);
cfg = readl(dev->regs + S5P_CISCCTRL);
+ cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK);
if (variant->has_mainscaler_ext) {
- cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK);
cfg |= S5P_CISCCTRL_MHRATIO_EXT(sc->main_hratio);
cfg |= S5P_CISCCTRL_MVRATIO_EXT(sc->main_vratio);
writel(cfg, dev->regs + S5P_CISCCTRL);
@@ -323,7 +333,6 @@ void fimc_hw_set_mainscaler(struct fimc_ctx *ctx)
cfg |= S5P_CIEXTEN_MVRATIO_EXT(sc->main_vratio);
writel(cfg, dev->regs + S5P_CIEXTEN);
} else {
- cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK);
cfg |= S5P_CISCCTRL_MHRATIO(sc->main_hratio);
cfg |= S5P_CISCCTRL_MVRATIO(sc->main_vratio);
writel(cfg, dev->regs + S5P_CISCCTRL);
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
index 1e8cdb77d4b..dff9dc79879 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
@@ -61,7 +61,7 @@ static struct s5p_mfc_fmt formats[] = {
.num_planes = 1,
},
{
- .name = "H264 Encoded Stream",
+ .name = "H263 Encoded Stream",
.fourcc = V4L2_PIX_FMT_H263,
.codec_mode = S5P_FIMV_CODEC_H263_ENC,
.type = MFC_FMT_ENC,
diff --git a/drivers/media/video/s5p-tv/mixer_video.c b/drivers/media/video/s5p-tv/mixer_video.c
index e16d3a4bc1d..b47d0c06ecf 100644
--- a/drivers/media/video/s5p-tv/mixer_video.c
+++ b/drivers/media/video/s5p-tv/mixer_video.c
@@ -16,6 +16,7 @@
#include <media/v4l2-ioctl.h>
#include <linux/videodev2.h>
#include <linux/mm.h>
+#include <linux/module.h>
#include <linux/version.h>
#include <linux/timer.h>
#include <media/videobuf2-dma-contig.h>
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index f390682629c..c51decfcae1 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -566,8 +566,10 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
ret = sh_mobile_ceu_soft_reset(pcdev);
csi2_sd = find_csi2(pcdev);
- if (csi2_sd)
- csi2_sd->grp_id = (long)icd;
+ if (csi2_sd) {
+ csi2_sd->grp_id = soc_camera_grp_id(icd);
+ v4l2_set_subdev_hostdata(csi2_sd, icd);
+ }
ret = v4l2_subdev_call(csi2_sd, core, s_power, 1);
if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) {
@@ -768,7 +770,7 @@ static struct v4l2_subdev *find_bus_subdev(struct sh_mobile_ceu_dev *pcdev,
{
if (pcdev->csi2_pdev) {
struct v4l2_subdev *csi2_sd = find_csi2(pcdev);
- if (csi2_sd && csi2_sd->grp_id == (u32)icd)
+ if (csi2_sd && csi2_sd->grp_id == soc_camera_grp_id(icd))
return csi2_sd;
}
@@ -1089,8 +1091,9 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int
/* Try 2560x1920, 1280x960, 640x480, 320x240 */
mf.width = 2560 >> shift;
mf.height = 1920 >> shift;
- ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video,
- s_mbus_fmt, &mf);
+ ret = v4l2_device_call_until_err(sd->v4l2_dev,
+ soc_camera_grp_id(icd), video,
+ s_mbus_fmt, &mf);
if (ret < 0)
return ret;
shift++;
@@ -1389,7 +1392,8 @@ static int client_s_fmt(struct soc_camera_device *icd,
bool ceu_1to1;
int ret;
- ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video,
+ ret = v4l2_device_call_until_err(sd->v4l2_dev,
+ soc_camera_grp_id(icd), video,
s_mbus_fmt, mf);
if (ret < 0)
return ret;
@@ -1426,8 +1430,9 @@ static int client_s_fmt(struct soc_camera_device *icd,
tmp_h = min(2 * tmp_h, max_height);
mf->width = tmp_w;
mf->height = tmp_h;
- ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video,
- s_mbus_fmt, mf);
+ ret = v4l2_device_call_until_err(sd->v4l2_dev,
+ soc_camera_grp_id(icd), video,
+ s_mbus_fmt, mf);
dev_geo(dev, "Camera scaled to %ux%u\n",
mf->width, mf->height);
if (ret < 0) {
@@ -1580,8 +1585,9 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
}
if (interm_width < icd->user_width || interm_height < icd->user_height) {
- ret = v4l2_device_call_until_err(sd->v4l2_dev, (int)icd, video,
- s_mbus_fmt, &mf);
+ ret = v4l2_device_call_until_err(sd->v4l2_dev,
+ soc_camera_grp_id(icd), video,
+ s_mbus_fmt, &mf);
if (ret < 0)
return ret;
@@ -1867,7 +1873,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
mf.code = xlate->code;
mf.colorspace = pix->colorspace;
- ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, try_mbus_fmt, &mf);
+ ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd),
+ video, try_mbus_fmt, &mf);
if (ret < 0)
return ret;
@@ -1891,8 +1898,9 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
*/
mf.width = 2560;
mf.height = 1920;
- ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video,
- try_mbus_fmt, &mf);
+ ret = v4l2_device_call_until_err(sd->v4l2_dev,
+ soc_camera_grp_id(icd), video,
+ try_mbus_fmt, &mf);
if (ret < 0) {
/* Shouldn't actually happen... */
dev_err(icd->parent,
diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c
index ea4f0473ed3..8a652b53ff7 100644
--- a/drivers/media/video/sh_mobile_csi2.c
+++ b/drivers/media/video/sh_mobile_csi2.c
@@ -143,7 +143,7 @@ static int sh_csi2_s_mbus_config(struct v4l2_subdev *sd,
const struct v4l2_mbus_config *cfg)
{
struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
- struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id;
+ struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd);
struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd);
struct v4l2_mbus_config client_cfg = {.type = V4L2_MBUS_CSI2,
.flags = priv->mipi_flags};
@@ -202,7 +202,7 @@ static void sh_csi2_hwinit(struct sh_csi2 *priv)
static int sh_csi2_client_connect(struct sh_csi2 *priv)
{
struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
- struct soc_camera_device *icd = (struct soc_camera_device *)priv->subdev.grp_id;
+ struct soc_camera_device *icd = v4l2_get_subdev_hostdata(&priv->subdev);
struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd);
struct device *dev = v4l2_get_subdevdata(&priv->subdev);
struct v4l2_mbus_config cfg;
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index b72580c3895..62e4312515c 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -1103,7 +1103,8 @@ static int soc_camera_probe(struct soc_camera_device *icd)
}
sd = soc_camera_to_subdev(icd);
- sd->grp_id = (long)icd;
+ sd->grp_id = soc_camera_grp_id(icd);
+ v4l2_set_subdev_hostdata(sd, icd);
if (v4l2_ctrl_add_handler(&icd->ctrl_handler, sd->ctrl_handler))
goto ectrl;
diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c
index 43c0ebb8195..b7b2d3483fd 100644
--- a/drivers/mfd/ab5500-debugfs.c
+++ b/drivers/mfd/ab5500-debugfs.c
@@ -4,7 +4,7 @@
* Debugfs support for the AB5500 MFD driver
*/
-#include <linux/export.h>
+#include <linux/module.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/mfd/ab5500/ab5500.h>
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 1e9173804ed..d3d572b2317 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -620,6 +620,7 @@ static struct resource __devinitdata ab8500_fg_resources[] = {
static struct resource __devinitdata ab8500_chargalg_resources[] = {};
+#ifdef CONFIG_DEBUG_FS
static struct resource __devinitdata ab8500_debug_resources[] = {
{
.name = "IRQ_FIRST",
@@ -634,6 +635,7 @@ static struct resource __devinitdata ab8500_debug_resources[] = {
.flags = IORESOURCE_IRQ,
},
};
+#endif
static struct resource __devinitdata ab8500_usb_resources[] = {
{
diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c
index f1d88483112..8d816cce832 100644
--- a/drivers/mfd/adp5520.c
+++ b/drivers/mfd/adp5520.c
@@ -109,7 +109,7 @@ int adp5520_set_bits(struct device *dev, int reg, uint8_t bit_mask)
ret = __adp5520_read(chip->client, reg, &reg_val);
- if (!ret && ((reg_val & bit_mask) == 0)) {
+ if (!ret && ((reg_val & bit_mask) != bit_mask)) {
reg_val |= bit_mask;
ret = __adp5520_write(chip->client, reg, reg_val);
}
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 1b79c37fd59..1924b857a0f 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -182,7 +182,7 @@ int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask)
if (ret)
goto out;
- if ((reg_val & bit_mask) == 0) {
+ if ((reg_val & bit_mask) != bit_mask) {
reg_val |= bit_mask;
ret = __da903x_write(chip->client, reg, reg_val);
}
@@ -549,6 +549,7 @@ static int __devexit da903x_remove(struct i2c_client *client)
struct da903x_chip *chip = i2c_get_clientdata(client);
da903x_remove_subdevs(chip);
+ free_irq(client->irq, chip);
kfree(chip);
return 0;
}
diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c
index 1e9ee533eac..ef39528088f 100644
--- a/drivers/mfd/jz4740-adc.c
+++ b/drivers/mfd/jz4740-adc.c
@@ -16,6 +16,7 @@
*/
#include <linux/err.h>
+#include <linux/io.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index bba26d96c24..a5ddf31b60c 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -197,7 +197,7 @@ int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask)
if (ret)
goto out;
- if ((reg_val & bit_mask) == 0) {
+ if ((reg_val & bit_mask) != bit_mask) {
reg_val |= bit_mask;
ret = __tps6586x_write(to_i2c_client(dev), reg, reg_val);
}
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 6f5b8cf2f65..c1da84bc157 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -120,7 +120,7 @@ int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask)
goto out;
}
- data &= mask;
+ data &= ~mask;
err = tps65910_i2c_write(tps65910, reg, 1, &data);
if (err)
dev_err(tps65910->dev, "write to reg %x failed\n", reg);
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index bfbd66021af..61e70cfaa77 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -363,13 +363,13 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
return -EPERM;
}
- sid = twl_map[mod_no].sid;
- twl = &twl_modules[sid];
-
if (unlikely(!inuse)) {
- pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
+ pr_err("%s: not initialized\n", DRIVER_NAME);
return -EPERM;
}
+ sid = twl_map[mod_no].sid;
+ twl = &twl_modules[sid];
+
mutex_lock(&twl->xfer_lock);
/*
* [MSG1]: fill the register address data
@@ -420,13 +420,13 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
return -EPERM;
}
- sid = twl_map[mod_no].sid;
- twl = &twl_modules[sid];
-
if (unlikely(!inuse)) {
- pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
+ pr_err("%s: not initialized\n", DRIVER_NAME);
return -EPERM;
}
+ sid = twl_map[mod_no].sid;
+ twl = &twl_modules[sid];
+
mutex_lock(&twl->xfer_lock);
/* [MSG1] fill the register address data */
msg = &twl->xfer_msg[0];
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index f062c8cc6c3..29f11e0765f 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -432,6 +432,7 @@ struct sih_agent {
u32 edge_change;
struct mutex irq_lock;
+ char *irq_name;
};
/*----------------------------------------------------------------------*/
@@ -589,7 +590,7 @@ static inline int sih_read_isr(const struct sih *sih)
* Generic handler for SIH interrupts ... we "know" this is called
* in task context, with IRQs enabled.
*/
-static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc)
+static irqreturn_t handle_twl4030_sih(int irq, void *data)
{
struct sih_agent *agent = irq_get_handler_data(irq);
const struct sih *sih = agent->sih;
@@ -602,7 +603,7 @@ static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc)
pr_err("twl4030: %s SIH, read ISR error %d\n",
sih->name, isr);
/* REVISIT: recover; eventually mask it all, etc */
- return;
+ return IRQ_HANDLED;
}
while (isr) {
@@ -616,6 +617,7 @@ static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc)
pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
sih->name, irq);
}
+ return IRQ_HANDLED;
}
static unsigned twl4030_irq_next;
@@ -668,18 +670,19 @@ int twl4030_sih_setup(int module)
activate_irq(irq);
}
- status = irq_base;
twl4030_irq_next += i;
/* replace generic PIH handler (handle_simple_irq) */
irq = sih_mod + twl4030_irq_base;
irq_set_handler_data(irq, agent);
- irq_set_chained_handler(irq, handle_twl4030_sih);
+ agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name);
+ status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0,
+ agent->irq_name ?: sih->name, NULL);
pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name,
irq, irq_base, twl4030_irq_next - 1);
- return status;
+ return status < 0 ? status : irq_base;
}
/* FIXME need a call to reverse twl4030_sih_setup() ... */
@@ -733,8 +736,9 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
}
/* install an irq handler to demultiplex the TWL4030 interrupt */
- status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, 0,
- "TWL4030-PIH", NULL);
+ status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih,
+ IRQF_ONESHOT,
+ "TWL4030-PIH", NULL);
if (status < 0) {
pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
goto fail_rqirq;
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 5d6ba132837..61894fced8e 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -239,6 +239,7 @@ static int wm8994_suspend(struct device *dev)
switch (wm8994->type) {
case WM8958:
+ case WM1811:
ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
if (ret < 0) {
dev_err(dev, "Failed to read power status: %d\n", ret);
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index e8a5eb38748..d31c78b72b0 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -302,17 +302,6 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
host->max_blk_size = 512;
host->max_blk_count = PAGE_CACHE_SIZE / 512;
- /*
- * Enable runtime power management by default. This flag was added due
- * to runtime power management causing disruption for some users, but
- * the power on/off code has been improved since then.
- *
- * We'll enable this flag by default as an experiment, and if no
- * problems are reported, we will follow up later and remove the flag
- * altogether.
- */
- host->caps = MMC_CAP_POWER_OFF_CARD;
-
return host;
free:
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index a8b4d2aa18e..f437c3e6f3a 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -741,7 +741,7 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
at91_mci_write(host, AT91_MCI_MR, (at91_mci_read(host, AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
/* maybe switch power to the card */
- if (host->board->vcc_pin) {
+ if (gpio_is_valid(host->board->vcc_pin)) {
switch (ios->power_mode) {
case MMC_POWER_OFF:
gpio_set_value(host->board->vcc_pin, 0);
@@ -897,7 +897,7 @@ static int at91_mci_get_ro(struct mmc_host *mmc)
{
struct at91mci_host *host = mmc_priv(mmc);
- if (host->board->wp_pin)
+ if (gpio_is_valid(host->board->wp_pin))
return !!gpio_get_value(host->board->wp_pin);
/*
* Board doesn't support read only detection; let the mmc core
@@ -991,21 +991,21 @@ static int __init at91_mci_probe(struct platform_device *pdev)
* Reserve GPIOs ... board init code makes sure these pins are set
* up as GPIOs with the right direction (input, except for vcc)
*/
- if (host->board->det_pin) {
+ if (gpio_is_valid(host->board->det_pin)) {
ret = gpio_request(host->board->det_pin, "mmc_detect");
if (ret < 0) {
dev_dbg(&pdev->dev, "couldn't claim card detect pin\n");
goto fail4b;
}
}
- if (host->board->wp_pin) {
+ if (gpio_is_valid(host->board->wp_pin)) {
ret = gpio_request(host->board->wp_pin, "mmc_wp");
if (ret < 0) {
dev_dbg(&pdev->dev, "couldn't claim wp sense pin\n");
goto fail4;
}
}
- if (host->board->vcc_pin) {
+ if (gpio_is_valid(host->board->vcc_pin)) {
ret = gpio_request(host->board->vcc_pin, "mmc_vcc");
if (ret < 0) {
dev_dbg(&pdev->dev, "couldn't claim vcc switch pin\n");
@@ -1057,7 +1057,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
/*
* Add host to MMC layer
*/
- if (host->board->det_pin) {
+ if (gpio_is_valid(host->board->det_pin)) {
host->present = !gpio_get_value(host->board->det_pin);
}
else
@@ -1068,7 +1068,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
/*
* monitor card insertion/removal if we can
*/
- if (host->board->det_pin) {
+ if (gpio_is_valid(host->board->det_pin)) {
ret = request_irq(gpio_to_irq(host->board->det_pin),
at91_mmc_det_irq, 0, mmc_hostname(mmc), host);
if (ret)
@@ -1087,13 +1087,13 @@ fail0:
fail1:
clk_put(host->mci_clk);
fail2:
- if (host->board->vcc_pin)
+ if (gpio_is_valid(host->board->vcc_pin))
gpio_free(host->board->vcc_pin);
fail3:
- if (host->board->wp_pin)
+ if (gpio_is_valid(host->board->wp_pin))
gpio_free(host->board->wp_pin);
fail4:
- if (host->board->det_pin)
+ if (gpio_is_valid(host->board->det_pin))
gpio_free(host->board->det_pin);
fail4b:
if (host->buffer)
@@ -1125,7 +1125,7 @@ static int __exit at91_mci_remove(struct platform_device *pdev)
dma_free_coherent(&pdev->dev, MCI_BUFSIZE,
host->buffer, host->physical_address);
- if (host->board->det_pin) {
+ if (gpio_is_valid(host->board->det_pin)) {
if (device_can_wakeup(&pdev->dev))
free_irq(gpio_to_irq(host->board->det_pin), host);
device_init_wakeup(&pdev->dev, 0);
@@ -1140,9 +1140,9 @@ static int __exit at91_mci_remove(struct platform_device *pdev)
clk_disable(host->mci_clk); /* Disable the peripheral clock */
clk_put(host->mci_clk);
- if (host->board->vcc_pin)
+ if (gpio_is_valid(host->board->vcc_pin))
gpio_free(host->board->vcc_pin);
- if (host->board->wp_pin)
+ if (gpio_is_valid(host->board->wp_pin))
gpio_free(host->board->wp_pin);
iounmap(host->baseaddr);
@@ -1163,7 +1163,7 @@ static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
struct at91mci_host *host = mmc_priv(mmc);
int ret = 0;
- if (host->board->det_pin && device_may_wakeup(&pdev->dev))
+ if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev))
enable_irq_wake(host->board->det_pin);
if (mmc)
@@ -1178,7 +1178,7 @@ static int at91_mci_resume(struct platform_device *pdev)
struct at91mci_host *host = mmc_priv(mmc);
int ret = 0;
- if (host->board->det_pin && device_may_wakeup(&pdev->dev))
+ if (gpio_is_valid(host->board->det_pin) && device_may_wakeup(&pdev->dev))
disable_irq_wake(host->board->det_pin);
if (mmc)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 50b5f9926f6..0726e59fd41 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -675,7 +675,8 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
unsigned int status)
{
/* First check for errors */
- if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+ if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR|
+ MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
u32 remain, success;
/* Terminate the DMA transfer */
@@ -754,8 +755,12 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
}
if (!cmd->data || cmd->error) {
- if (host->data)
+ if (host->data) {
+ /* Terminate the DMA transfer */
+ if (dma_inprogress(host))
+ mmci_dma_data_error(host);
mmci_stop_data(host);
+ }
mmci_request_end(host, cmd->mrq);
} else if (!(cmd->data->flags & MMC_DATA_READ)) {
mmci_start_data(host, cmd->data);
@@ -955,8 +960,9 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
data = host->data;
- if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|
- MCI_RXOVERRUN|MCI_DATAEND|MCI_DATABLOCKEND) && data)
+ if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR|
+ MCI_TXUNDERRUN|MCI_RXOVERRUN|MCI_DATAEND|
+ MCI_DATABLOCKEND) && data)
mmci_data_irq(host, data, status);
cmd = host->cmd;
diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c
index 87b6f079b6e..b4257e70061 100644
--- a/drivers/mmc/host/sdhci-cns3xxx.c
+++ b/drivers/mmc/host/sdhci-cns3xxx.c
@@ -109,13 +109,10 @@ static struct platform_driver sdhci_cns3xxx_driver = {
.driver = {
.name = "sdhci-cns3xxx",
.owner = THIS_MODULE,
+ .pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_cns3xxx_probe,
.remove = __devexit_p(sdhci_cns3xxx_remove),
-#ifdef CONFIG_PM
- .suspend = sdhci_pltfm_suspend,
- .resume = sdhci_pltfm_resume,
-#endif
};
static int __init sdhci_cns3xxx_init(void)
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index f2d29dca442..a81312c91f7 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -82,13 +82,10 @@ static struct platform_driver sdhci_dove_driver = {
.driver = {
.name = "sdhci-dove",
.owner = THIS_MODULE,
+ .pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_dove_probe,
.remove = __devexit_p(sdhci_dove_remove),
-#ifdef CONFIG_PM
- .suspend = sdhci_pltfm_suspend,
- .resume = sdhci_pltfm_resume,
-#endif
};
static int __init sdhci_dove_init(void)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 4b976f00ea8..38ebc4ea259 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -599,14 +599,11 @@ static struct platform_driver sdhci_esdhc_imx_driver = {
.name = "sdhci-esdhc-imx",
.owner = THIS_MODULE,
.of_match_table = imx_esdhc_dt_ids,
+ .pm = SDHCI_PLTFM_PMOPS,
},
.id_table = imx_esdhc_devtype,
.probe = sdhci_esdhc_imx_probe,
.remove = __devexit_p(sdhci_esdhc_imx_remove),
-#ifdef CONFIG_PM
- .suspend = sdhci_pltfm_suspend,
- .resume = sdhci_pltfm_resume,
-#endif
};
static int __init sdhci_esdhc_imx_init(void)
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 59e9d003e58..01e5f627e0f 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -125,13 +125,10 @@ static struct platform_driver sdhci_esdhc_driver = {
.name = "sdhci-esdhc",
.owner = THIS_MODULE,
.of_match_table = sdhci_esdhc_of_match,
+ .pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_esdhc_probe,
.remove = __devexit_p(sdhci_esdhc_remove),
-#ifdef CONFIG_PM
- .suspend = sdhci_pltfm_suspend,
- .resume = sdhci_pltfm_resume,
-#endif
};
static int __init sdhci_esdhc_init(void)
diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c
index 9b0d794a4f6..3619adc7d9f 100644
--- a/drivers/mmc/host/sdhci-of-hlwd.c
+++ b/drivers/mmc/host/sdhci-of-hlwd.c
@@ -87,13 +87,10 @@ static struct platform_driver sdhci_hlwd_driver = {
.name = "sdhci-hlwd",
.owner = THIS_MODULE,
.of_match_table = sdhci_hlwd_of_match,
+ .pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_hlwd_probe,
.remove = __devexit_p(sdhci_hlwd_remove),
-#ifdef CONFIG_PM
- .suspend = sdhci_pltfm_suspend,
- .resume = sdhci_pltfm_resume,
-#endif
};
static int __init sdhci_hlwd_init(void)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index d833d9c2f7e..6878a94626b 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -54,8 +54,7 @@ struct sdhci_pci_fixes {
int (*probe_slot) (struct sdhci_pci_slot *);
void (*remove_slot) (struct sdhci_pci_slot *, int);
- int (*suspend) (struct sdhci_pci_chip *,
- pm_message_t);
+ int (*suspend) (struct sdhci_pci_chip *);
int (*resume) (struct sdhci_pci_chip *);
};
@@ -549,7 +548,7 @@ static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead)
jmicron_enable_mmc(slot->host, 0);
}
-static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state)
+static int jmicron_suspend(struct sdhci_pci_chip *chip)
{
int i;
@@ -993,8 +992,9 @@ static struct sdhci_ops sdhci_pci_ops = {
#ifdef CONFIG_PM
-static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int sdhci_pci_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct sdhci_pci_chip *chip;
struct sdhci_pci_slot *slot;
mmc_pm_flag_t slot_pm_flags;
@@ -1010,7 +1010,7 @@ static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state)
if (!slot)
continue;
- ret = sdhci_suspend_host(slot->host, state);
+ ret = sdhci_suspend_host(slot->host);
if (ret) {
for (i--; i >= 0; i--)
@@ -1026,7 +1026,7 @@ static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state)
}
if (chip->fixes && chip->fixes->suspend) {
- ret = chip->fixes->suspend(chip, state);
+ ret = chip->fixes->suspend(chip);
if (ret) {
for (i = chip->num_slots - 1; i >= 0; i--)
sdhci_resume_host(chip->slots[i]->host);
@@ -1042,16 +1042,17 @@ static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state)
}
pci_set_power_state(pdev, PCI_D3hot);
} else {
- pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+ pci_enable_wake(pdev, PCI_D3hot, 0);
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ pci_set_power_state(pdev, PCI_D3hot);
}
return 0;
}
-static int sdhci_pci_resume(struct pci_dev *pdev)
+static int sdhci_pci_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct sdhci_pci_chip *chip;
struct sdhci_pci_slot *slot;
int i, ret;
@@ -1099,7 +1100,6 @@ static int sdhci_pci_runtime_suspend(struct device *dev)
struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
struct sdhci_pci_chip *chip;
struct sdhci_pci_slot *slot;
- pm_message_t state = { .event = PM_EVENT_SUSPEND };
int i, ret;
chip = pci_get_drvdata(pdev);
@@ -1121,7 +1121,7 @@ static int sdhci_pci_runtime_suspend(struct device *dev)
}
if (chip->fixes && chip->fixes->suspend) {
- ret = chip->fixes->suspend(chip, state);
+ ret = chip->fixes->suspend(chip);
if (ret) {
for (i = chip->num_slots - 1; i >= 0; i--)
sdhci_runtime_resume_host(chip->slots[i]->host);
@@ -1176,6 +1176,8 @@ static int sdhci_pci_runtime_idle(struct device *dev)
#endif
static const struct dev_pm_ops sdhci_pci_pm_ops = {
+ .suspend = sdhci_pci_suspend,
+ .resume = sdhci_pci_resume,
.runtime_suspend = sdhci_pci_runtime_suspend,
.runtime_resume = sdhci_pci_runtime_resume,
.runtime_idle = sdhci_pci_runtime_idle,
@@ -1428,8 +1430,6 @@ static struct pci_driver sdhci_driver = {
.id_table = pci_ids,
.probe = sdhci_pci_probe,
.remove = __devexit_p(sdhci_pci_remove),
- .suspend = sdhci_pci_suspend,
- .resume = sdhci_pci_resume,
.driver = {
.pm = &sdhci_pci_pm_ops
},
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index a9e12ea0558..03970bcb349 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -194,21 +194,25 @@ int sdhci_pltfm_unregister(struct platform_device *pdev)
EXPORT_SYMBOL_GPL(sdhci_pltfm_unregister);
#ifdef CONFIG_PM
-int sdhci_pltfm_suspend(struct platform_device *dev, pm_message_t state)
+static int sdhci_pltfm_suspend(struct device *dev)
{
- struct sdhci_host *host = platform_get_drvdata(dev);
+ struct sdhci_host *host = dev_get_drvdata(dev);
- return sdhci_suspend_host(host, state);
+ return sdhci_suspend_host(host);
}
-EXPORT_SYMBOL_GPL(sdhci_pltfm_suspend);
-int sdhci_pltfm_resume(struct platform_device *dev)
+static int sdhci_pltfm_resume(struct device *dev)
{
- struct sdhci_host *host = platform_get_drvdata(dev);
+ struct sdhci_host *host = dev_get_drvdata(dev);
return sdhci_resume_host(host);
}
-EXPORT_SYMBOL_GPL(sdhci_pltfm_resume);
+
+const struct dev_pm_ops sdhci_pltfm_pmops = {
+ .suspend = sdhci_pltfm_suspend,
+ .resume = sdhci_pltfm_resume,
+};
+EXPORT_SYMBOL_GPL(sdhci_pltfm_pmops);
#endif /* CONFIG_PM */
static int __init sdhci_pltfm_drv_init(void)
diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h
index 3a9fc3f4084..37e0e184a0b 100644
--- a/drivers/mmc/host/sdhci-pltfm.h
+++ b/drivers/mmc/host/sdhci-pltfm.h
@@ -99,8 +99,10 @@ extern int sdhci_pltfm_register(struct platform_device *pdev,
extern int sdhci_pltfm_unregister(struct platform_device *pdev);
#ifdef CONFIG_PM
-extern int sdhci_pltfm_suspend(struct platform_device *dev, pm_message_t state);
-extern int sdhci_pltfm_resume(struct platform_device *dev);
+extern const struct dev_pm_ops sdhci_pltfm_pmops;
+#define SDHCI_PLTFM_PMOPS (&sdhci_pltfm_pmops)
+#else
+#define SDHCI_PLTFM_PMOPS NULL
#endif
#endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index d4bf6d30c7b..7a039c3cb1f 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -218,13 +218,10 @@ static struct platform_driver sdhci_pxav2_driver = {
.driver = {
.name = "sdhci-pxav2",
.owner = THIS_MODULE,
+ .pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_pxav2_probe,
.remove = __devexit_p(sdhci_pxav2_remove),
-#ifdef CONFIG_PM
- .suspend = sdhci_pltfm_suspend,
- .resume = sdhci_pltfm_resume,
-#endif
};
static int __init sdhci_pxav2_init(void)
{
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index cff4ad3e7a5..15673a7ee6a 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -264,13 +264,10 @@ static struct platform_driver sdhci_pxav3_driver = {
.driver = {
.name = "sdhci-pxav3",
.owner = THIS_MODULE,
+ .pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_pxav3_probe,
.remove = __devexit_p(sdhci_pxav3_remove),
-#ifdef CONFIG_PM
- .suspend = sdhci_pltfm_suspend,
- .resume = sdhci_pltfm_resume,
-#endif
};
static int __init sdhci_pxav3_init(void)
{
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index cb60c4197e0..9a20d1f55bb 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -435,14 +435,11 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
struct clk *clk;
- char *name = pdata->clocks[ptr];
-
- if (name == NULL)
- continue;
+ char name[14];
+ snprintf(name, 14, "mmc_busclk.%d", ptr);
clk = clk_get(dev, name);
if (IS_ERR(clk)) {
- dev_err(dev, "failed to get clock %s\n", name);
continue;
}
@@ -622,23 +619,29 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
-static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm)
+static int sdhci_s3c_suspend(struct device *dev)
{
- struct sdhci_host *host = platform_get_drvdata(dev);
+ struct sdhci_host *host = dev_get_drvdata(dev);
- return sdhci_suspend_host(host, pm);
+ return sdhci_suspend_host(host);
}
-static int sdhci_s3c_resume(struct platform_device *dev)
+static int sdhci_s3c_resume(struct device *dev)
{
- struct sdhci_host *host = platform_get_drvdata(dev);
+ struct sdhci_host *host = dev_get_drvdata(dev);
return sdhci_resume_host(host);
}
+static const struct dev_pm_ops sdhci_s3c_pmops = {
+ .suspend = sdhci_s3c_suspend,
+ .resume = sdhci_s3c_resume,
+};
+
+#define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops)
+
#else
-#define sdhci_s3c_suspend NULL
-#define sdhci_s3c_resume NULL
+#define SDHCI_S3C_PMOPS NULL
#endif
static struct platform_driver sdhci_s3c_driver = {
@@ -647,6 +650,7 @@ static struct platform_driver sdhci_s3c_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "s3c-sdhci",
+ .pm = SDHCI_S3C_PMOPS,
},
};
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 89699e861fc..e2e18d3f949 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -318,13 +318,10 @@ static struct platform_driver sdhci_tegra_driver = {
.name = "sdhci-tegra",
.owner = THIS_MODULE,
.of_match_table = sdhci_tegra_dt_match,
+ .pm = SDHCI_PLTFM_PMOPS,
},
.probe = sdhci_tegra_probe,
.remove = __devexit_p(sdhci_tegra_remove),
-#ifdef CONFIG_PM
- .suspend = sdhci_pltfm_suspend,
- .resume = sdhci_pltfm_resume,
-#endif
};
static int __init sdhci_tegra_init(void)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6d8eea32354..19ed580f2ca 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2327,7 +2327,7 @@ out:
#ifdef CONFIG_PM
-int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state)
+int sdhci_suspend_host(struct sdhci_host *host)
{
int ret;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 0a5b65460d8..a04d4d0c6fd 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -374,7 +374,7 @@ extern int sdhci_add_host(struct sdhci_host *host);
extern void sdhci_remove_host(struct sdhci_host *host, int dead);
#ifdef CONFIG_PM
-extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
+extern int sdhci_suspend_host(struct sdhci_host *host);
extern int sdhci_resume_host(struct sdhci_host *host);
extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
#endif
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index e8f6e65183d..2ec978bc32b 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -259,7 +259,7 @@ static int firmware_rom_wait_states = 0x04;
static int firmware_rom_wait_states = 0x1C;
#endif
-module_param(firmware_rom_wait_states, bool, 0644);
+module_param(firmware_rom_wait_states, int, 0644);
MODULE_PARM_DESC(firmware_rom_wait_states,
"ROM wait states byte=RRRIIEEE (Reserved Internal External)");
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 94f55348972..45876d0e5b8 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -227,10 +227,14 @@ static int platram_probe(struct platform_device *pdev)
if (!err)
dev_info(&pdev->dev, "registered mtd device\n");
- /* add the whole device. */
- err = mtd_device_register(info->mtd, NULL, 0);
- if (err)
- dev_err(&pdev->dev, "failed to register the entire device\n");
+ if (pdata->nr_partitions) {
+ /* add the whole device. */
+ err = mtd_device_register(info->mtd, NULL, 0);
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed to register the entire device\n");
+ }
+ }
return err;
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 411a17df9fc..2a25b6789af 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -98,7 +98,7 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
}
info->mtd->owner = THIS_MODULE;
- mtd_device_parse_register(info->mtd, probes, 0, NULL, 0);
+ mtd_device_parse_register(info->mtd, probes, 0, flash->parts, flash->nr_parts);
platform_set_drvdata(pdev, info);
return 0;
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 23e5d77c39f..4dd056e2e16 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -113,7 +113,7 @@ static int cpu_has_dma(void)
*/
static void atmel_nand_enable(struct atmel_nand_host *host)
{
- if (host->board->enable_pin)
+ if (gpio_is_valid(host->board->enable_pin))
gpio_set_value(host->board->enable_pin, 0);
}
@@ -122,7 +122,7 @@ static void atmel_nand_enable(struct atmel_nand_host *host)
*/
static void atmel_nand_disable(struct atmel_nand_host *host)
{
- if (host->board->enable_pin)
+ if (gpio_is_valid(host->board->enable_pin))
gpio_set_value(host->board->enable_pin, 1);
}
@@ -492,7 +492,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
nand_chip->IO_ADDR_W = host->io_base;
nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
- if (host->board->rdy_pin)
+ if (gpio_is_valid(host->board->rdy_pin))
nand_chip->dev_ready = atmel_nand_device_ready;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -530,7 +530,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
atmel_nand_enable(host);
- if (host->board->det_pin) {
+ if (gpio_is_valid(host->board->det_pin)) {
if (gpio_get_value(host->board->det_pin)) {
printk(KERN_INFO "No SmartMedia card inserted.\n");
res = -ENXIO;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 071b63420f0..493ec2fcf97 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -21,9 +21,9 @@
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/mtd/gpmi-nand.h>
#include <linux/mtd/partitions.h>
-
#include "gpmi-nand.h"
/* add our owner bbt descriptor */
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index ee1713907b9..f8aacf48ecd 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -188,7 +188,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
if (!flash_np)
return -ENODEV;
- ppdata->of_node = flash_np;
+ ppdata.of_node = flash_np;
ndfc->mtd.name = kasprintf(GFP_KERNEL, "%s.%s",
dev_name(&ndfc->ofdev->dev), flash_np->name);
if (!ndfc->mtd.name) {
diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
index 56624d30348..dfeb46cb3f7 100644
--- a/drivers/net/ethernet/cadence/at91_ether.c
+++ b/drivers/net/ethernet/cadence/at91_ether.c
@@ -26,6 +26,7 @@
#include <linux/skbuff.h>
#include <linux/dma-mapping.h>
#include <linux/ethtool.h>
+#include <linux/platform_data/macb.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gfp.h>
@@ -984,7 +985,7 @@ static const struct net_device_ops at91ether_netdev_ops = {
static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address,
struct platform_device *pdev, struct clk *ether_clk)
{
- struct at91_eth_data *board_data = pdev->dev.platform_data;
+ struct macb_platform_data *board_data = pdev->dev.platform_data;
struct net_device *dev;
struct at91_private *lp;
unsigned int val;
diff --git a/drivers/net/ethernet/cadence/at91_ether.h b/drivers/net/ethernet/cadence/at91_ether.h
index 353f4dab62b..3725fbb0def 100644
--- a/drivers/net/ethernet/cadence/at91_ether.h
+++ b/drivers/net/ethernet/cadence/at91_ether.h
@@ -85,7 +85,9 @@ struct recv_desc_bufs
struct at91_private
{
struct mii_if_info mii; /* ethtool support */
- struct at91_eth_data board_data; /* board-specific configuration */
+ struct macb_platform_data board_data; /* board-specific
+ * configuration (shared with
+ * macb for common data */
struct clk *ether_clk; /* clock */
/* PHY */
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index a437b46e549..aa1d597091a 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -19,12 +20,10 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_data/macb.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
-#include <mach/board.h>
-#include <mach/cpu.h>
-
#include "macb.h"
#define RX_BUFFER_SIZE 128
@@ -84,7 +83,7 @@ static void __init macb_get_hwaddr(struct macb *bp)
if (is_valid_ether_addr(addr)) {
memcpy(bp->dev->dev_addr, addr, sizeof(addr));
} else {
- dev_info(&bp->pdev->dev, "invalid hw address, using random\n");
+ netdev_info(bp->dev, "invalid hw address, using random\n");
random_ether_addr(bp->dev->dev_addr);
}
}
@@ -178,11 +177,12 @@ static void macb_handle_link_change(struct net_device *dev)
if (status_change) {
if (phydev->link)
- printk(KERN_INFO "%s: link up (%d/%s)\n",
- dev->name, phydev->speed,
- DUPLEX_FULL == phydev->duplex ? "Full":"Half");
+ netdev_info(dev, "link up (%d/%s)\n",
+ phydev->speed,
+ phydev->duplex == DUPLEX_FULL ?
+ "Full" : "Half");
else
- printk(KERN_INFO "%s: link down\n", dev->name);
+ netdev_info(dev, "link down\n");
}
}
@@ -191,12 +191,12 @@ static int macb_mii_probe(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
struct phy_device *phydev;
- struct eth_platform_data *pdata;
+ struct macb_platform_data *pdata;
int ret;
phydev = phy_find_first(bp->mii_bus);
if (!phydev) {
- printk (KERN_ERR "%s: no PHY found\n", dev->name);
+ netdev_err(dev, "no PHY found\n");
return -1;
}
@@ -209,7 +209,7 @@ static int macb_mii_probe(struct net_device *dev)
PHY_INTERFACE_MODE_RMII :
PHY_INTERFACE_MODE_MII);
if (ret) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+ netdev_err(dev, "Could not attach to PHY\n");
return ret;
}
@@ -228,7 +228,7 @@ static int macb_mii_probe(struct net_device *dev)
static int macb_mii_init(struct macb *bp)
{
- struct eth_platform_data *pdata;
+ struct macb_platform_data *pdata;
int err = -ENXIO, i;
/* Enable management port */
@@ -303,14 +303,13 @@ static void macb_tx(struct macb *bp)
status = macb_readl(bp, TSR);
macb_writel(bp, TSR, status);
- dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n",
- (unsigned long)status);
+ netdev_dbg(bp->dev, "macb_tx status = %02lx\n", (unsigned long)status);
if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) {
int i;
- printk(KERN_ERR "%s: TX %s, resetting buffers\n",
- bp->dev->name, status & MACB_BIT(UND) ?
- "underrun" : "retry limit exceeded");
+ netdev_err(bp->dev, "TX %s, resetting buffers\n",
+ status & MACB_BIT(UND) ?
+ "underrun" : "retry limit exceeded");
/* Transfer ongoing, disable transmitter, to avoid confusion */
if (status & MACB_BIT(TGO))
@@ -369,8 +368,8 @@ static void macb_tx(struct macb *bp)
if (!(bufstat & MACB_BIT(TX_USED)))
break;
- dev_dbg(&bp->pdev->dev, "skb %u (data %p) TX complete\n",
- tail, skb->data);
+ netdev_dbg(bp->dev, "skb %u (data %p) TX complete\n",
+ tail, skb->data);
dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len,
DMA_TO_DEVICE);
bp->stats.tx_packets++;
@@ -395,8 +394,8 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
len = MACB_BFEXT(RX_FRMLEN, bp->rx_ring[last_frag].ctrl);
- dev_dbg(&bp->pdev->dev, "macb_rx_frame frags %u - %u (len %u)\n",
- first_frag, last_frag, len);
+ netdev_dbg(bp->dev, "macb_rx_frame frags %u - %u (len %u)\n",
+ first_frag, last_frag, len);
skb = dev_alloc_skb(len + RX_OFFSET);
if (!skb) {
@@ -437,8 +436,8 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
bp->stats.rx_packets++;
bp->stats.rx_bytes += len;
- dev_dbg(&bp->pdev->dev, "received skb of length %u, csum: %08x\n",
- skb->len, skb->csum);
+ netdev_dbg(bp->dev, "received skb of length %u, csum: %08x\n",
+ skb->len, skb->csum);
netif_receive_skb(skb);
return 0;
@@ -515,8 +514,8 @@ static int macb_poll(struct napi_struct *napi, int budget)
work_done = 0;
- dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n",
- (unsigned long)status, budget);
+ netdev_dbg(bp->dev, "poll: status = %08lx, budget = %d\n",
+ (unsigned long)status, budget);
work_done = macb_rx(bp, budget);
if (work_done < budget) {
@@ -565,8 +564,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
if (napi_schedule_prep(&bp->napi)) {
- dev_dbg(&bp->pdev->dev,
- "scheduling RX softirq\n");
+ netdev_dbg(bp->dev, "scheduling RX softirq\n");
__napi_schedule(&bp->napi);
}
}
@@ -587,11 +585,11 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
if (status & MACB_BIT(HRESP)) {
/*
- * TODO: Reset the hardware, and maybe move the printk
- * to a lower-priority context as well (work queue?)
+ * TODO: Reset the hardware, and maybe move the
+ * netdev_err to a lower-priority context as well
+ * (work queue?)
*/
- printk(KERN_ERR "%s: DMA bus error: HRESP not OK\n",
- dev->name);
+ netdev_err(dev, "DMA bus error: HRESP not OK\n");
}
status = macb_readl(bp, ISR);
@@ -626,16 +624,12 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
unsigned long flags;
#ifdef DEBUG
- int i;
- dev_dbg(&bp->pdev->dev,
- "start_xmit: len %u head %p data %p tail %p end %p\n",
- skb->len, skb->head, skb->data,
- skb_tail_pointer(skb), skb_end_pointer(skb));
- dev_dbg(&bp->pdev->dev,
- "data:");
- for (i = 0; i < 16; i++)
- printk(" %02x", (unsigned int)skb->data[i]);
- printk("\n");
+ netdev_dbg(bp->dev,
+ "start_xmit: len %u head %p data %p tail %p end %p\n",
+ skb->len, skb->head, skb->data,
+ skb_tail_pointer(skb), skb_end_pointer(skb));
+ print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_OFFSET, 16, 1,
+ skb->data, 16, true);
#endif
len = skb->len;
@@ -645,21 +639,20 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (TX_BUFFS_AVAIL(bp) < 1) {
netif_stop_queue(dev);
spin_unlock_irqrestore(&bp->lock, flags);
- dev_err(&bp->pdev->dev,
- "BUG! Tx Ring full when queue awake!\n");
- dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
- bp->tx_head, bp->tx_tail);
+ netdev_err(bp->dev, "BUG! Tx Ring full when queue awake!\n");
+ netdev_dbg(bp->dev, "tx_head = %u, tx_tail = %u\n",
+ bp->tx_head, bp->tx_tail);
return NETDEV_TX_BUSY;
}
entry = bp->tx_head;
- dev_dbg(&bp->pdev->dev, "Allocated ring entry %u\n", entry);
+ netdev_dbg(bp->dev, "Allocated ring entry %u\n", entry);
mapping = dma_map_single(&bp->pdev->dev, skb->data,
len, DMA_TO_DEVICE);
bp->tx_skb[entry].skb = skb;
bp->tx_skb[entry].mapping = mapping;
- dev_dbg(&bp->pdev->dev, "Mapped skb data %p to DMA addr %08lx\n",
- skb->data, (unsigned long)mapping);
+ netdev_dbg(bp->dev, "Mapped skb data %p to DMA addr %08lx\n",
+ skb->data, (unsigned long)mapping);
ctrl = MACB_BF(TX_FRMLEN, len);
ctrl |= MACB_BIT(TX_LAST);
@@ -723,27 +716,27 @@ static int macb_alloc_consistent(struct macb *bp)
&bp->rx_ring_dma, GFP_KERNEL);
if (!bp->rx_ring)
goto out_err;
- dev_dbg(&bp->pdev->dev,
- "Allocated RX ring of %d bytes at %08lx (mapped %p)\n",
- size, (unsigned long)bp->rx_ring_dma, bp->rx_ring);
+ netdev_dbg(bp->dev,
+ "Allocated RX ring of %d bytes at %08lx (mapped %p)\n",
+ size, (unsigned long)bp->rx_ring_dma, bp->rx_ring);
size = TX_RING_BYTES;
bp->tx_ring = dma_alloc_coherent(&bp->pdev->dev, size,
&bp->tx_ring_dma, GFP_KERNEL);
if (!bp->tx_ring)
goto out_err;
- dev_dbg(&bp->pdev->dev,
- "Allocated TX ring of %d bytes at %08lx (mapped %p)\n",
- size, (unsigned long)bp->tx_ring_dma, bp->tx_ring);
+ netdev_dbg(bp->dev,
+ "Allocated TX ring of %d bytes at %08lx (mapped %p)\n",
+ size, (unsigned long)bp->tx_ring_dma, bp->tx_ring);
size = RX_RING_SIZE * RX_BUFFER_SIZE;
bp->rx_buffers = dma_alloc_coherent(&bp->pdev->dev, size,
&bp->rx_buffers_dma, GFP_KERNEL);
if (!bp->rx_buffers)
goto out_err;
- dev_dbg(&bp->pdev->dev,
- "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n",
- size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers);
+ netdev_dbg(bp->dev,
+ "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n",
+ size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers);
return 0;
@@ -954,7 +947,7 @@ static int macb_open(struct net_device *dev)
struct macb *bp = netdev_priv(dev);
int err;
- dev_dbg(&bp->pdev->dev, "open\n");
+ netdev_dbg(bp->dev, "open\n");
/* if the phy is not yet register, retry later*/
if (!bp->phy_dev)
@@ -965,9 +958,8 @@ static int macb_open(struct net_device *dev)
err = macb_alloc_consistent(bp);
if (err) {
- printk(KERN_ERR
- "%s: Unable to allocate DMA memory (error %d)\n",
- dev->name, err);
+ netdev_err(dev, "Unable to allocate DMA memory (error %d)\n",
+ err);
return err;
}
@@ -1119,7 +1111,7 @@ static const struct net_device_ops macb_netdev_ops = {
static int __init macb_probe(struct platform_device *pdev)
{
- struct eth_platform_data *pdata;
+ struct macb_platform_data *pdata;
struct resource *regs;
struct net_device *dev;
struct macb *bp;
@@ -1152,28 +1144,19 @@ static int __init macb_probe(struct platform_device *pdev)
spin_lock_init(&bp->lock);
-#if defined(CONFIG_ARCH_AT91)
- bp->pclk = clk_get(&pdev->dev, "macb_clk");
+ bp->pclk = clk_get(&pdev->dev, "pclk");
if (IS_ERR(bp->pclk)) {
dev_err(&pdev->dev, "failed to get macb_clk\n");
goto err_out_free_dev;
}
clk_enable(bp->pclk);
-#else
- bp->pclk = clk_get(&pdev->dev, "pclk");
- if (IS_ERR(bp->pclk)) {
- dev_err(&pdev->dev, "failed to get pclk\n");
- goto err_out_free_dev;
- }
+
bp->hclk = clk_get(&pdev->dev, "hclk");
if (IS_ERR(bp->hclk)) {
dev_err(&pdev->dev, "failed to get hclk\n");
goto err_out_put_pclk;
}
-
- clk_enable(bp->pclk);
clk_enable(bp->hclk);
-#endif
bp->regs = ioremap(regs->start, resource_size(regs));
if (!bp->regs) {
@@ -1185,9 +1168,8 @@ static int __init macb_probe(struct platform_device *pdev)
dev->irq = platform_get_irq(pdev, 0);
err = request_irq(dev->irq, macb_interrupt, 0, dev->name, dev);
if (err) {
- printk(KERN_ERR
- "%s: Unable to request IRQ %d (error %d)\n",
- dev->name, dev->irq, err);
+ dev_err(&pdev->dev, "Unable to request IRQ %d (error %d)\n",
+ dev->irq, err);
goto err_out_iounmap;
}
@@ -1239,13 +1221,12 @@ static int __init macb_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
- printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d (%pM)\n",
- dev->name, dev->base_addr, dev->irq, dev->dev_addr);
+ netdev_info(dev, "Atmel MACB at 0x%08lx irq %d (%pM)\n",
+ dev->base_addr, dev->irq, dev->dev_addr);
phydev = bp->phy_dev;
- printk(KERN_INFO "%s: attached PHY driver [%s] "
- "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
- phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
+ netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+ phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
return 0;
@@ -1256,14 +1237,10 @@ err_out_free_irq:
err_out_iounmap:
iounmap(bp->regs);
err_out_disable_clocks:
-#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
clk_put(bp->hclk);
-#endif
clk_disable(bp->pclk);
-#ifndef CONFIG_ARCH_AT91
err_out_put_pclk:
-#endif
clk_put(bp->pclk);
err_out_free_dev:
free_netdev(dev);
@@ -1289,10 +1266,8 @@ static int __exit macb_remove(struct platform_device *pdev)
unregister_netdev(dev);
free_irq(dev->irq, dev);
iounmap(bp->regs);
-#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
clk_put(bp->hclk);
-#endif
clk_disable(bp->pclk);
clk_put(bp->pclk);
free_netdev(dev);
@@ -1310,9 +1285,7 @@ static int macb_suspend(struct platform_device *pdev, pm_message_t state)
netif_device_detach(netdev);
-#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
-#endif
clk_disable(bp->pclk);
return 0;
@@ -1324,9 +1297,7 @@ static int macb_resume(struct platform_device *pdev)
struct macb *bp = netdev_priv(netdev);
clk_enable(bp->pclk);
-#ifndef CONFIG_ARCH_AT91
clk_enable(bp->hclk);
-#endif
netif_device_attach(netdev);
diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c
index c7b60839ac9..dea0cb4400e 100644
--- a/drivers/net/ethernet/marvell/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
@@ -2606,6 +2606,9 @@ static int skge_up(struct net_device *dev)
spin_unlock_irq(&hw->hw_lock);
napi_enable(&skge->napi);
+
+ skge_set_multicast(dev);
+
return 0;
free_tx_ring:
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_cq.c b/drivers/net/ethernet/mellanox/mlx4/en_cq.c
index 227997d775e..5829e0b47e7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_cq.c
@@ -147,6 +147,7 @@ void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq)
mlx4_free_hwq_res(mdev->dev, &cq->wqres, cq->buf_size);
if (priv->mdev->dev->caps.comp_pool && cq->vector)
mlx4_release_eq(priv->mdev->dev, cq->vector);
+ cq->vector = 0;
cq->buf_size = 0;
cq->buf = NULL;
}
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 67bf0781999..c8f47f17186 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -477,7 +477,6 @@ enum rtl_register_content {
/* Config1 register p.24 */
LEDS1 = (1 << 7),
LEDS0 = (1 << 6),
- MSIEnable = (1 << 5), /* Enable Message Signaled Interrupt */
Speed_down = (1 << 4),
MEMMAP = (1 << 3),
IOMAP = (1 << 2),
@@ -485,6 +484,7 @@ enum rtl_register_content {
PMEnable = (1 << 0), /* Power Management Enable */
/* Config2 register p. 25 */
+ MSIEnable = (1 << 5), /* 8169 only. Reserved in the 8168. */
PCI_Clock_66MHz = 0x01,
PCI_Clock_33MHz = 0x00,
@@ -3426,22 +3426,24 @@ static const struct rtl_cfg_info {
};
/* Cfg9346_Unlock assumed. */
-static unsigned rtl_try_msi(struct pci_dev *pdev, void __iomem *ioaddr,
+static unsigned rtl_try_msi(struct rtl8169_private *tp,
const struct rtl_cfg_info *cfg)
{
+ void __iomem *ioaddr = tp->mmio_addr;
unsigned msi = 0;
u8 cfg2;
cfg2 = RTL_R8(Config2) & ~MSIEnable;
if (cfg->features & RTL_FEATURE_MSI) {
- if (pci_enable_msi(pdev)) {
- dev_info(&pdev->dev, "no MSI. Back to INTx.\n");
+ if (pci_enable_msi(tp->pci_dev)) {
+ netif_info(tp, hw, tp->dev, "no MSI. Back to INTx.\n");
} else {
cfg2 |= MSIEnable;
msi = RTL_FEATURE_MSI;
}
}
- RTL_W8(Config2, cfg2);
+ if (tp->mac_version <= RTL_GIGA_MAC_VER_06)
+ RTL_W8(Config2, cfg2);
return msi;
}
@@ -4077,7 +4079,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
tp->features |= RTL_FEATURE_WOL;
if ((RTL_R8(Config5) & (UWF | BWF | MWF)) != 0)
tp->features |= RTL_FEATURE_WOL;
- tp->features |= rtl_try_msi(pdev, ioaddr, cfg);
+ tp->features |= rtl_try_msi(tp, cfg);
RTL_W8(Cfg9346, Cfg9346_Lock);
if (rtl_tbi_enabled(tp)) {
diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index dca9d3369cd..c97d2f59085 100644
--- a/drivers/net/ethernet/ti/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
@@ -836,11 +836,13 @@ int cpdma_chan_stop(struct cpdma_chan *chan)
chan_write(chan, cp, CPDMA_TEARDOWN_VALUE);
/* handle completed packets */
+ spin_unlock_irqrestore(&chan->lock, flags);
do {
ret = __cpdma_chan_process(chan);
if (ret < 0)
break;
} while ((ret & CPDMA_DESC_TD_COMPLETE) == 0);
+ spin_lock_irqsave(&chan->lock, flags);
/* remaining packets haven't been tx/rx'ed, clean them up */
while (chan->head) {
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index e6fed4d4cb7..e95f0e60a9b 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1655,6 +1655,10 @@ static const struct usb_device_id products [] = {
// ASIX 88772a
USB_DEVICE(0x0db0, 0xa877),
.driver_info = (unsigned long) &ax88772_info,
+}, {
+ // Asus USB Ethernet Adapter
+ USB_DEVICE (0x0b95, 0x7e2b),
+ .driver_info = (unsigned long) &ax88772_info,
},
{ }, // END
};
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 888abc2be3a..528d5f3e868 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -1271,7 +1271,9 @@ static void ath_rc_init(struct ath_softc *sc,
ath_rc_priv->max_valid_rate = k;
ath_rc_sort_validrates(rate_table, ath_rc_priv);
- ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4];
+ ath_rc_priv->rate_max_phy = (k > 4) ?
+ ath_rc_priv->valid_rate_index[k-4] :
+ ath_rc_priv->valid_rate_index[k-1];
ath_rc_priv->rate_table = rate_table;
ath_dbg(common, ATH_DBG_CONFIG,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
index a7a6def40d0..5c7c17c7166 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -606,8 +606,8 @@ int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
if (ctx->ht.enabled) {
/* if HT40 is used, it should not change
* after associated except channel switch */
- if (iwl_is_associated_ctx(ctx) &&
- !ctx->ht.is_40mhz)
+ if (!ctx->ht.is_40mhz ||
+ !iwl_is_associated_ctx(ctx))
iwlagn_config_ht40(conf, ctx);
} else
ctx->ht.is_40mhz = false;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index 35a6b71f358..df1540ca610 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -91,7 +91,10 @@ static void iwlagn_tx_cmd_build_basic(struct iwl_priv *priv,
tx_cmd->tid_tspec = qc[0] & 0xf;
tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
} else {
- tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
+ tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ else
+ tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
}
iwlagn_tx_cmd_protection(priv, info, fc, &tx_flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index bacc06c95e7..e0e9a3dfbc0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2850,6 +2850,9 @@ static int iwlagn_mac_tx_sync(struct ieee80211_hw *hw,
int ret;
u8 sta_id;
+ if (ctx->ctxid != IWL_RXON_CTX_PAN)
+ return 0;
+
IWL_DEBUG_MAC80211(priv, "enter\n");
mutex_lock(&priv->shrd->mutex);
@@ -2898,6 +2901,9 @@ static void iwlagn_mac_finish_tx_sync(struct ieee80211_hw *hw,
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
struct iwl_rxon_context *ctx = vif_priv->ctx;
+ if (ctx->ctxid != IWL_RXON_CTX_PAN)
+ return;
+
IWL_DEBUG_MAC80211(priv, "enter\n");
mutex_lock(&priv->shrd->mutex);
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index ce918980e97..5f17ab8e76b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -1197,9 +1197,7 @@ static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
iwl_print_hex_dump(trans, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
/* Set up entry for this TFD in Tx byte-count array */
- if (is_agg)
- iwl_trans_txq_update_byte_cnt_tbl(trans, txq,
- le16_to_cpu(tx_cmd->len));
+ iwl_trans_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len));
dma_sync_single_for_device(bus(trans)->dev, txcmd_phys, firstlen,
DMA_BIDIRECTIONAL);
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index ac278156d39..6e0a3eaecf7 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -939,7 +939,6 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter)
{
struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL;
unsigned long cmd_flags;
- unsigned long cmd_pending_q_flags;
unsigned long scan_pending_q_flags;
uint16_t cancel_scan_cmd = false;
@@ -949,12 +948,9 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter)
cmd_node = adapter->curr_cmd;
cmd_node->wait_q_enabled = false;
cmd_node->cmd_flag |= CMD_F_CANCELED;
- spin_lock_irqsave(&adapter->cmd_pending_q_lock,
- cmd_pending_q_flags);
- list_del(&cmd_node->list);
- spin_unlock_irqrestore(&adapter->cmd_pending_q_lock,
- cmd_pending_q_flags);
mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
+ mwifiex_complete_cmd(adapter, adapter->curr_cmd);
+ adapter->curr_cmd = NULL;
spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags);
}
@@ -981,7 +977,6 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter)
spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags);
}
adapter->cmd_wait_q.status = -1;
- mwifiex_complete_cmd(adapter, adapter->curr_cmd);
}
/*
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index cbd5d701c7e..63b3ec48c20 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -314,7 +314,7 @@ static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *l
if (!lookup)
return NULL;
- for(; lookup->name != NULL; lookup++) {
+ for(; lookup->compatible != NULL; lookup++) {
if (!of_device_is_compatible(np, lookup->compatible))
continue;
if (of_address_to_resource(np, 0, &res))
diff --git a/drivers/oprofile/oprofile_files.c b/drivers/oprofile/oprofile_files.c
index 89f63456646..84a208dbed9 100644
--- a/drivers/oprofile/oprofile_files.c
+++ b/drivers/oprofile/oprofile_files.c
@@ -45,7 +45,7 @@ static ssize_t timeout_write(struct file *file, char const __user *buf,
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
retval = oprofile_set_timeout(val);
@@ -84,7 +84,7 @@ static ssize_t depth_write(struct file *file, char const __user *buf, size_t cou
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
retval = oprofile_set_ulong(&oprofile_backtrace_depth, val);
@@ -141,9 +141,10 @@ static ssize_t enable_write(struct file *file, char const __user *buf, size_t co
return -EINVAL;
retval = oprofilefs_ulong_from_user(&val, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
+ retval = 0;
if (val)
retval = oprofile_start();
else
diff --git a/drivers/oprofile/oprofilefs.c b/drivers/oprofile/oprofilefs.c
index d0de6cc2d7a..2f0aa0f700e 100644
--- a/drivers/oprofile/oprofilefs.c
+++ b/drivers/oprofile/oprofilefs.c
@@ -60,6 +60,13 @@ ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user *buf, size_t cou
}
+/*
+ * Note: If oprofilefs_ulong_from_user() returns 0, then *val remains
+ * unchanged and might be uninitialized. This follows write syscall
+ * implementation when count is zero: "If count is zero ... [and if]
+ * no errors are detected, 0 will be returned without causing any
+ * other effect." (man 2 write)
+ */
int oprofilefs_ulong_from_user(unsigned long *val, char const __user *buf, size_t count)
{
char tmpbuf[TMPBUFSIZE];
@@ -79,7 +86,7 @@ int oprofilefs_ulong_from_user(unsigned long *val, char const __user *buf, size_
raw_spin_lock_irqsave(&oprofilefs_lock, flags);
*val = simple_strtoul(tmpbuf, NULL, 0);
raw_spin_unlock_irqrestore(&oprofilefs_lock, flags);
- return 0;
+ return count;
}
@@ -99,7 +106,7 @@ static ssize_t ulong_write_file(struct file *file, char const __user *buf, size_
return -EINVAL;
retval = oprofilefs_ulong_from_user(&value, buf, count);
- if (retval)
+ if (retval <= 0)
return retval;
retval = oprofile_set_ulong(file->private_data, value);
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 7ec56fb0bd7..b0dd08e6a9d 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -13,6 +13,7 @@
#include <linux/export.h>
#include <linux/pci-ats.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include "pci.h"
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index fce1c54a0c8..9ddf69e3bbe 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -132,6 +132,18 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
return AE_OK;
+ pdev = pbus->self;
+ if (pdev && pci_is_pcie(pdev)) {
+ tmp = acpi_find_root_bridge_handle(pdev);
+ if (tmp) {
+ struct acpi_pci_root *root = acpi_pci_find_root(tmp);
+
+ if (root && (root->osc_control_set &
+ OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
+ return AE_OK;
+ }
+ }
+
acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
device = (adr >> 16) & 0xffff;
function = adr & 0xffff;
@@ -213,7 +225,6 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
pdev = pci_get_slot(pbus, PCI_DEVFN(device, function));
if (pdev) {
- pdev->current_state = PCI_D0;
slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
pci_dev_put(pdev);
}
@@ -459,17 +470,8 @@ static int add_bridge(acpi_handle handle)
{
acpi_status status;
unsigned long long tmp;
- struct acpi_pci_root *root;
acpi_handle dummy_handle;
- /*
- * We shouldn't use this bridge if PCIe native hotplug control has been
- * granted by the BIOS for it.
- */
- root = acpi_pci_find_root(handle);
- if (root && (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL))
- return -ENODEV;
-
/* if the bridge doesn't have _STA, we assume it is always there */
status = acpi_get_handle(handle, "_STA", &dummy_handle);
if (ACPI_SUCCESS(status)) {
@@ -1385,19 +1387,11 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type,
static acpi_status
find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
{
- struct acpi_pci_root *root;
int *count = (int *)context;
if (!acpi_is_root_bridge(handle))
return AE_OK;
- root = acpi_pci_find_root(handle);
- if (!root)
- return AE_OK;
-
- if (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)
- return AE_OK;
-
(*count)++;
acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
handle_hotplug_event_bridge, NULL);
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index b82c155d7b3..1969a3ee305 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -283,6 +283,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
struct resource *res;
struct pci_dev *pdev;
struct pci_sriov *iov = dev->sriov;
+ int bars = 0;
if (!nr_virtfn)
return 0;
@@ -307,6 +308,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
nres = 0;
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+ bars |= (1 << (i + PCI_IOV_RESOURCES));
res = dev->resource + PCI_IOV_RESOURCES + i;
if (res->parent)
nres++;
@@ -324,6 +326,11 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
return -ENOMEM;
}
+ if (pci_enable_resources(dev, bars)) {
+ dev_err(&dev->dev, "SR-IOV: IOV BARS not allocated\n");
+ return -ENOMEM;
+ }
+
if (iov->link != dev->devfn) {
pdev = pci_get_slot(dev->bus, iov->link);
if (!pdev)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6f45a73c6e9..6d4a5319148 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -664,6 +664,9 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
error = platform_pci_set_power_state(dev, state);
if (!error)
pci_update_current_state(dev, state);
+ /* Fall back to PCI_D0 if native PM is not supported */
+ if (!dev->pm_cap)
+ dev->current_state = PCI_D0;
} else {
error = -ENODEV;
/* Fall back to PCI_D0 if native PM is not supported */
@@ -1126,7 +1129,11 @@ static int __pci_enable_device_flags(struct pci_dev *dev,
if (atomic_add_return(1, &dev->enable_cnt) > 1)
return 0; /* already enabled */
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
+ /* only skip sriov related */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++)
+ if (dev->resource[i].flags & flags)
+ bars |= (1 << i);
+ for (i = PCI_BRIDGE_RESOURCES; i < DEVICE_COUNT_RESOURCE; i++)
if (dev->resource[i].flags & flags)
bars |= (1 << i);
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index fa4d9f32418..3bcc7cfcaba 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -73,6 +73,8 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
err = -EINVAL;
mutex_unlock(&rtc->ops_lock);
+ /* A timer might have just expired */
+ schedule_work(&rtc->irqwork);
return err;
}
EXPORT_SYMBOL_GPL(rtc_set_time);
@@ -112,6 +114,8 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs)
err = -EINVAL;
mutex_unlock(&rtc->ops_lock);
+ /* A timer might have just expired */
+ schedule_work(&rtc->irqwork);
return err;
}
@@ -403,6 +407,8 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
timerqueue_add(&rtc->timerqueue, &rtc->aie_timer.node);
}
mutex_unlock(&rtc->ops_lock);
+ /* maybe that was in the past.*/
+ schedule_work(&rtc->irqwork);
return err;
}
EXPORT_SYMBOL_GPL(rtc_initialize_alarm);
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index e39b77a4609..dc474bc6522 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -32,11 +32,17 @@
#include <mach/at91_rtc.h>
+#define at91_rtc_read(field) \
+ __raw_readl(at91_rtc_regs + field)
+#define at91_rtc_write(field, val) \
+ __raw_writel((val), at91_rtc_regs + field)
#define AT91_RTC_EPOCH 1900UL /* just like arch/arm/common/rtctime.c */
static DECLARE_COMPLETION(at91_rtc_updated);
static unsigned int at91_alarm_year = AT91_RTC_EPOCH;
+static void __iomem *at91_rtc_regs;
+static int irq;
/*
* Decode time/date into rtc_time structure
@@ -48,10 +54,10 @@ static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg,
/* must read twice in case it changes */
do {
- time = at91_sys_read(timereg);
- date = at91_sys_read(calreg);
- } while ((time != at91_sys_read(timereg)) ||
- (date != at91_sys_read(calreg)));
+ time = at91_rtc_read(timereg);
+ date = at91_rtc_read(calreg);
+ } while ((time != at91_rtc_read(timereg)) ||
+ (date != at91_rtc_read(calreg)));
tm->tm_sec = bcd2bin((time & AT91_RTC_SEC) >> 0);
tm->tm_min = bcd2bin((time & AT91_RTC_MIN) >> 8);
@@ -98,19 +104,19 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
tm->tm_hour, tm->tm_min, tm->tm_sec);
/* Stop Time/Calendar from counting */
- cr = at91_sys_read(AT91_RTC_CR);
- at91_sys_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM);
+ cr = at91_rtc_read(AT91_RTC_CR);
+ at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM);
- at91_sys_write(AT91_RTC_IER, AT91_RTC_ACKUPD);
+ at91_rtc_write(AT91_RTC_IER, AT91_RTC_ACKUPD);
wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */
- at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD);
+ at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD);
- at91_sys_write(AT91_RTC_TIMR,
+ at91_rtc_write(AT91_RTC_TIMR,
bin2bcd(tm->tm_sec) << 0
| bin2bcd(tm->tm_min) << 8
| bin2bcd(tm->tm_hour) << 16);
- at91_sys_write(AT91_RTC_CALR,
+ at91_rtc_write(AT91_RTC_CALR,
bin2bcd((tm->tm_year + 1900) / 100) /* century */
| bin2bcd(tm->tm_year % 100) << 8 /* year */
| bin2bcd(tm->tm_mon + 1) << 16 /* tm_mon starts at zero */
@@ -118,8 +124,8 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
| bin2bcd(tm->tm_mday) << 24);
/* Restart Time/Calendar */
- cr = at91_sys_read(AT91_RTC_CR);
- at91_sys_write(AT91_RTC_CR, cr & ~(AT91_RTC_UPDCAL | AT91_RTC_UPDTIM));
+ cr = at91_rtc_read(AT91_RTC_CR);
+ at91_rtc_write(AT91_RTC_CR, cr & ~(AT91_RTC_UPDCAL | AT91_RTC_UPDTIM));
return 0;
}
@@ -135,7 +141,7 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
tm->tm_year = at91_alarm_year - 1900;
- alrm->enabled = (at91_sys_read(AT91_RTC_IMR) & AT91_RTC_ALARM)
+ alrm->enabled = (at91_rtc_read(AT91_RTC_IMR) & AT91_RTC_ALARM)
? 1 : 0;
pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
@@ -160,20 +166,20 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
tm.tm_min = alrm->time.tm_min;
tm.tm_sec = alrm->time.tm_sec;
- at91_sys_write(AT91_RTC_IDR, AT91_RTC_ALARM);
- at91_sys_write(AT91_RTC_TIMALR,
+ at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
+ at91_rtc_write(AT91_RTC_TIMALR,
bin2bcd(tm.tm_sec) << 0
| bin2bcd(tm.tm_min) << 8
| bin2bcd(tm.tm_hour) << 16
| AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN);
- at91_sys_write(AT91_RTC_CALALR,
+ at91_rtc_write(AT91_RTC_CALALR,
bin2bcd(tm.tm_mon + 1) << 16 /* tm_mon starts at zero */
| bin2bcd(tm.tm_mday) << 24
| AT91_RTC_DATEEN | AT91_RTC_MTHEN);
if (alrm->enabled) {
- at91_sys_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
- at91_sys_write(AT91_RTC_IER, AT91_RTC_ALARM);
+ at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
+ at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
}
pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
@@ -188,10 +194,10 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
pr_debug("%s(): cmd=%08x\n", __func__, enabled);
if (enabled) {
- at91_sys_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
- at91_sys_write(AT91_RTC_IER, AT91_RTC_ALARM);
+ at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
+ at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
} else
- at91_sys_write(AT91_RTC_IDR, AT91_RTC_ALARM);
+ at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
return 0;
}
@@ -200,7 +206,7 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
*/
static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
{
- unsigned long imr = at91_sys_read(AT91_RTC_IMR);
+ unsigned long imr = at91_rtc_read(AT91_RTC_IMR);
seq_printf(seq, "update_IRQ\t: %s\n",
(imr & AT91_RTC_ACKUPD) ? "yes" : "no");
@@ -220,7 +226,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id)
unsigned int rtsr;
unsigned long events = 0;
- rtsr = at91_sys_read(AT91_RTC_SR) & at91_sys_read(AT91_RTC_IMR);
+ rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read(AT91_RTC_IMR);
if (rtsr) { /* this interrupt is shared! Is it ours? */
if (rtsr & AT91_RTC_ALARM)
events |= (RTC_AF | RTC_IRQF);
@@ -229,7 +235,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id)
if (rtsr & AT91_RTC_ACKUPD)
complete(&at91_rtc_updated);
- at91_sys_write(AT91_RTC_SCCR, rtsr); /* clear status reg */
+ at91_rtc_write(AT91_RTC_SCCR, rtsr); /* clear status reg */
rtc_update_irq(rtc, 1, events);
@@ -256,22 +262,41 @@ static const struct rtc_class_ops at91_rtc_ops = {
static int __init at91_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
- int ret;
+ struct resource *regs;
+ int ret = 0;
- at91_sys_write(AT91_RTC_CR, 0);
- at91_sys_write(AT91_RTC_MR, 0); /* 24 hour mode */
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs) {
+ dev_err(&pdev->dev, "no mmio resource defined\n");
+ return -ENXIO;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no irq resource defined\n");
+ return -ENXIO;
+ }
+
+ at91_rtc_regs = ioremap(regs->start, resource_size(regs));
+ if (!at91_rtc_regs) {
+ dev_err(&pdev->dev, "failed to map registers, aborting.\n");
+ return -ENOMEM;
+ }
+
+ at91_rtc_write(AT91_RTC_CR, 0);
+ at91_rtc_write(AT91_RTC_MR, 0); /* 24 hour mode */
/* Disable all interrupts */
- at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+ at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
- ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt,
+ ret = request_irq(irq, at91_rtc_interrupt,
IRQF_SHARED,
"at91_rtc", pdev);
if (ret) {
printk(KERN_ERR "at91_rtc: IRQ %d already in use.\n",
- AT91_ID_SYS);
+ irq);
return ret;
}
@@ -284,7 +309,7 @@ static int __init at91_rtc_probe(struct platform_device *pdev)
rtc = rtc_device_register(pdev->name, &pdev->dev,
&at91_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
- free_irq(AT91_ID_SYS, pdev);
+ free_irq(irq, pdev);
return PTR_ERR(rtc);
}
platform_set_drvdata(pdev, rtc);
@@ -301,10 +326,10 @@ static int __exit at91_rtc_remove(struct platform_device *pdev)
struct rtc_device *rtc = platform_get_drvdata(pdev);
/* Disable all interrupts */
- at91_sys_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+ at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
- free_irq(AT91_ID_SYS, pdev);
+ free_irq(irq, pdev);
rtc_device_unregister(rtc);
platform_set_drvdata(pdev, NULL);
@@ -323,13 +348,13 @@ static int at91_rtc_suspend(struct device *dev)
/* this IRQ is shared with DBGU and other hardware which isn't
* necessarily doing PM like we are...
*/
- at91_rtc_imr = at91_sys_read(AT91_RTC_IMR)
+ at91_rtc_imr = at91_rtc_read(AT91_RTC_IMR)
& (AT91_RTC_ALARM|AT91_RTC_SECEV);
if (at91_rtc_imr) {
if (device_may_wakeup(dev))
- enable_irq_wake(AT91_ID_SYS);
+ enable_irq_wake(irq);
else
- at91_sys_write(AT91_RTC_IDR, at91_rtc_imr);
+ at91_rtc_write(AT91_RTC_IDR, at91_rtc_imr);
}
return 0;
}
@@ -338,9 +363,9 @@ static int at91_rtc_resume(struct device *dev)
{
if (at91_rtc_imr) {
if (device_may_wakeup(dev))
- disable_irq_wake(AT91_ID_SYS);
+ disable_irq_wake(irq);
else
- at91_sys_write(AT91_RTC_IER, at91_rtc_imr);
+ at91_rtc_write(AT91_RTC_IER, at91_rtc_imr);
}
return 0;
}
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index eda128fc1d3..64aedd8cc09 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -357,10 +357,19 @@ static int m41t80_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *t)
static struct rtc_class_ops m41t80_rtc_ops = {
.read_time = m41t80_rtc_read_time,
.set_time = m41t80_rtc_set_time,
+ /*
+ * XXX - m41t80 alarm functionality is reported broken.
+ * until it is fixed, don't register alarm functions.
+ *
.read_alarm = m41t80_rtc_read_alarm,
.set_alarm = m41t80_rtc_set_alarm,
+ */
.proc = m41t80_rtc_proc,
+ /*
+ * See above comment on broken alarm
+ *
.alarm_irq_enable = m41t80_rtc_alarm_irq_enable,
+ */
};
#if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE)
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 5b979d9cc33..175067a17c4 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -25,6 +25,7 @@
#include <linux/clk.h>
#include <linux/log2.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <asm/uaccess.h>
@@ -507,7 +508,13 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
goto err_nortc;
}
- s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node)
+ s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node,
+ "samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410;
+ else
+#endif
+ s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
/* Check RTC Time */
@@ -629,6 +636,17 @@ static int s3c_rtc_resume(struct platform_device *pdev)
#define s3c_rtc_resume NULL
#endif
+#ifdef CONFIG_OF
+static const struct of_device_id s3c_rtc_dt_match[] = {
+ { .compatible = "samsung,s3c2410-rtc" },
+ { .compatible = "samsung,s3c6410-rtc" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match);
+#else
+#define s3c_rtc_dt_match NULL
+#endif
+
static struct platform_device_id s3c_rtc_driver_ids[] = {
{
.name = "s3c2410-rtc",
@@ -651,6 +669,7 @@ static struct platform_driver s3c_rtc_driver = {
.driver = {
.name = "s3c-rtc",
.owner = THIS_MODULE,
+ .of_match_table = s3c_rtc_dt_match,
},
};
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 11f07f88822..b79576b64f4 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -55,6 +55,10 @@ static void zfcp_scsi_slave_destroy(struct scsi_device *sdev)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
+ /* if previous slave_alloc returned early, there is nothing to do */
+ if (!zfcp_sdev->port)
+ return;
+
zfcp_erp_lun_shutdown_wait(sdev, "scssd_1");
put_device(&zfcp_sdev->port->dev);
}
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index dba72a4e6a1..1ad0b822556 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -1906,18 +1906,19 @@ static int bnx2i_queue_scsi_cmd_resp(struct iscsi_session *session,
spin_lock(&session->lock);
task = iscsi_itt_to_task(bnx2i_conn->cls_conn->dd_data,
cqe->itt & ISCSI_CMD_RESPONSE_INDEX);
- if (!task) {
+ if (!task || !task->sc) {
spin_unlock(&session->lock);
return -EINVAL;
}
sc = task->sc;
- spin_unlock(&session->lock);
if (!blk_rq_cpu_valid(sc->request))
cpu = smp_processor_id();
else
cpu = sc->request->cpu;
+ spin_unlock(&session->lock);
+
p = &per_cpu(bnx2i_percpu, cpu);
spin_lock(&p->p_work_lock);
if (unlikely(!p->iothread)) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index cefbe44bb84..8d67467dd9c 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -31,6 +31,8 @@
#include <linux/sysfs.h>
#include <linux/ctype.h>
#include <linux/workqueue.h>
+#include <net/dcbnl.h>
+#include <net/dcbevent.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
#include <scsi/scsi_transport.h>
@@ -101,6 +103,8 @@ static int fcoe_ddp_done(struct fc_lport *, u16);
static int fcoe_ddp_target(struct fc_lport *, u16, struct scatterlist *,
unsigned int);
static int fcoe_cpu_callback(struct notifier_block *, unsigned long, void *);
+static int fcoe_dcb_app_notification(struct notifier_block *notifier,
+ ulong event, void *ptr);
static bool fcoe_match(struct net_device *netdev);
static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode);
@@ -129,6 +133,11 @@ static struct notifier_block fcoe_cpu_notifier = {
.notifier_call = fcoe_cpu_callback,
};
+/* notification function for DCB events */
+static struct notifier_block dcb_notifier = {
+ .notifier_call = fcoe_dcb_app_notification,
+};
+
static struct scsi_transport_template *fcoe_nport_scsi_transport;
static struct scsi_transport_template *fcoe_vport_scsi_transport;
@@ -1522,6 +1531,8 @@ int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp)
skb_reset_network_header(skb);
skb->mac_len = elen;
skb->protocol = htons(ETH_P_FCOE);
+ skb->priority = port->priority;
+
if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN &&
fcoe->realdev->features & NETIF_F_HW_VLAN_TX) {
skb->vlan_tci = VLAN_TAG_PRESENT |
@@ -1624,6 +1635,7 @@ static inline int fcoe_filter_frames(struct fc_lport *lport,
stats->InvalidCRCCount++;
if (stats->InvalidCRCCount < 5)
printk(KERN_WARNING "fcoe: dropping frame with CRC error\n");
+ put_cpu();
return -EINVAL;
}
@@ -1746,6 +1758,7 @@ int fcoe_percpu_receive_thread(void *arg)
*/
static void fcoe_dev_setup(void)
{
+ register_dcbevent_notifier(&dcb_notifier);
register_netdevice_notifier(&fcoe_notifier);
}
@@ -1754,9 +1767,69 @@ static void fcoe_dev_setup(void)
*/
static void fcoe_dev_cleanup(void)
{
+ unregister_dcbevent_notifier(&dcb_notifier);
unregister_netdevice_notifier(&fcoe_notifier);
}
+static struct fcoe_interface *
+fcoe_hostlist_lookup_realdev_port(struct net_device *netdev)
+{
+ struct fcoe_interface *fcoe;
+ struct net_device *real_dev;
+
+ list_for_each_entry(fcoe, &fcoe_hostlist, list) {
+ if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN)
+ real_dev = vlan_dev_real_dev(fcoe->netdev);
+ else
+ real_dev = fcoe->netdev;
+
+ if (netdev == real_dev)
+ return fcoe;
+ }
+ return NULL;
+}
+
+static int fcoe_dcb_app_notification(struct notifier_block *notifier,
+ ulong event, void *ptr)
+{
+ struct dcb_app_type *entry = ptr;
+ struct fcoe_interface *fcoe;
+ struct net_device *netdev;
+ struct fcoe_port *port;
+ int prio;
+
+ if (entry->app.selector != DCB_APP_IDTYPE_ETHTYPE)
+ return NOTIFY_OK;
+
+ netdev = dev_get_by_index(&init_net, entry->ifindex);
+ if (!netdev)
+ return NOTIFY_OK;
+
+ fcoe = fcoe_hostlist_lookup_realdev_port(netdev);
+ dev_put(netdev);
+ if (!fcoe)
+ return NOTIFY_OK;
+
+ if (entry->dcbx & DCB_CAP_DCBX_VER_CEE)
+ prio = ffs(entry->app.priority) - 1;
+ else
+ prio = entry->app.priority;
+
+ if (prio < 0)
+ return NOTIFY_OK;
+
+ if (entry->app.protocol == ETH_P_FIP ||
+ entry->app.protocol == ETH_P_FCOE)
+ fcoe->ctlr.priority = prio;
+
+ if (entry->app.protocol == ETH_P_FCOE) {
+ port = lport_priv(fcoe->ctlr.lp);
+ port->priority = prio;
+ }
+
+ return NOTIFY_OK;
+}
+
/**
* fcoe_device_notification() - Handler for net device events
* @notifier: The context of the notification
@@ -1965,6 +2038,46 @@ static bool fcoe_match(struct net_device *netdev)
}
/**
+ * fcoe_dcb_create() - Initialize DCB attributes and hooks
+ * @netdev: The net_device object of the L2 link that should be queried
+ * @port: The fcoe_port to bind FCoE APP priority with
+ * @
+ */
+static void fcoe_dcb_create(struct fcoe_interface *fcoe)
+{
+#ifdef CONFIG_DCB
+ int dcbx;
+ u8 fup, up;
+ struct net_device *netdev = fcoe->realdev;
+ struct fcoe_port *port = lport_priv(fcoe->ctlr.lp);
+ struct dcb_app app = {
+ .priority = 0,
+ .protocol = ETH_P_FCOE
+ };
+
+ /* setup DCB priority attributes. */
+ if (netdev && netdev->dcbnl_ops && netdev->dcbnl_ops->getdcbx) {
+ dcbx = netdev->dcbnl_ops->getdcbx(netdev);
+
+ if (dcbx & DCB_CAP_DCBX_VER_IEEE) {
+ app.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE;
+ up = dcb_ieee_getapp_mask(netdev, &app);
+ app.protocol = ETH_P_FIP;
+ fup = dcb_ieee_getapp_mask(netdev, &app);
+ } else {
+ app.selector = DCB_APP_IDTYPE_ETHTYPE;
+ up = dcb_getapp(netdev, &app);
+ app.protocol = ETH_P_FIP;
+ fup = dcb_getapp(netdev, &app);
+ }
+
+ port->priority = ffs(up) ? ffs(up) - 1 : 0;
+ fcoe->ctlr.priority = ffs(fup) ? ffs(fup) - 1 : port->priority;
+ }
+#endif
+}
+
+/**
* fcoe_create() - Create a fcoe interface
* @netdev : The net_device object the Ethernet interface to create on
* @fip_mode: The FIP mode for this creation
@@ -2007,6 +2120,9 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode)
/* Make this the "master" N_Port */
fcoe->ctlr.lp = lport;
+ /* setup DCB priority attributes. */
+ fcoe_dcb_create(fcoe);
+
/* add to lports list */
fcoe_hostlist_add(lport);
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index c74c4b8e71e..e7522dcc296 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -320,6 +320,7 @@ static void fcoe_ctlr_solicit(struct fcoe_ctlr *fip, struct fcoe_fcf *fcf)
skb_put(skb, sizeof(*sol));
skb->protocol = htons(ETH_P_FIP);
+ skb->priority = fip->priority;
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
fip->send(fip, skb);
@@ -474,6 +475,7 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip,
}
skb_put(skb, len);
skb->protocol = htons(ETH_P_FIP);
+ skb->priority = fip->priority;
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
fip->send(fip, skb);
@@ -566,6 +568,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
cap->fip.fip_dl_len = htons(dlen / FIP_BPW);
skb->protocol = htons(ETH_P_FIP);
+ skb->priority = fip->priority;
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
return 0;
@@ -1911,6 +1914,7 @@ static void fcoe_ctlr_vn_send(struct fcoe_ctlr *fip,
skb_put(skb, len);
skb->protocol = htons(ETH_P_FIP);
+ skb->priority = fip->priority;
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 4e041f6d808..d570573b796 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -4335,7 +4335,7 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
/* insert into event log */
sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
sizeof(Mpi2EventDataSasDeviceStatusChange_t);
- event_reply = kzalloc(sz, GFP_KERNEL);
+ event_reply = kzalloc(sz, GFP_ATOMIC);
if (!event_reply) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index ac326c41e93..6465dae5883 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1762,12 +1762,31 @@ qla2x00_get_host_port_state(struct Scsi_Host *shost)
scsi_qla_host_t *vha = shost_priv(shost);
struct scsi_qla_host *base_vha = pci_get_drvdata(vha->hw->pdev);
- if (!base_vha->flags.online)
+ if (!base_vha->flags.online) {
fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
- else if (atomic_read(&base_vha->loop_state) == LOOP_TIMEOUT)
- fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
- else
+ return;
+ }
+
+ switch (atomic_read(&base_vha->loop_state)) {
+ case LOOP_UPDATE:
+ fc_host_port_state(shost) = FC_PORTSTATE_DIAGNOSTICS;
+ break;
+ case LOOP_DOWN:
+ if (test_bit(LOOP_RESYNC_NEEDED, &base_vha->dpc_flags))
+ fc_host_port_state(shost) = FC_PORTSTATE_DIAGNOSTICS;
+ else
+ fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
+ break;
+ case LOOP_DEAD:
+ fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
+ break;
+ case LOOP_READY:
fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
+ break;
+ default:
+ fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
+ break;
+ }
}
static int
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 9df4787715c..f3cddd5800c 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -12,17 +12,17 @@
* | Level | Last Value Used | Holes |
* ----------------------------------------------------------------------
* | Module Init and Probe | 0x0116 | |
- * | Mailbox commands | 0x1129 | |
+ * | Mailbox commands | 0x112b | |
* | Device Discovery | 0x2083 | |
* | Queue Command and IO tracing | 0x302e | 0x3008 |
* | DPC Thread | 0x401c | |
* | Async Events | 0x5059 | |
- * | Timer Routines | 0x600d | |
+ * | Timer Routines | 0x6010 | 0x600e,0x600f |
* | User Space Interactions | 0x709d | |
- * | Task Management | 0x8041 | |
+ * | Task Management | 0x8041 | 0x800b |
* | AER/EEH | 0x900f | |
* | Virtual Port | 0xa007 | |
- * | ISP82XX Specific | 0xb051 | |
+ * | ISP82XX Specific | 0xb052 | |
* | MultiQ | 0xc00b | |
* | Misc | 0xd00b | |
* ----------------------------------------------------------------------
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index ce32d8135c9..c0c11afb685 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -578,6 +578,7 @@ extern int qla82xx_check_md_needed(scsi_qla_host_t *);
extern void qla82xx_chip_reset_cleanup(scsi_qla_host_t *);
extern int qla82xx_mbx_beacon_ctl(scsi_qla_host_t *, int);
extern char *qdev_state(uint32_t);
+extern void qla82xx_clear_pending_mbx(scsi_qla_host_t *);
/* BSG related functions */
extern int qla24xx_bsg_request(struct fc_bsg_job *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index f03e915f187..54ea68cec4c 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1509,7 +1509,8 @@ enable_82xx_npiv:
&ha->fw_xcb_count, NULL, NULL,
&ha->max_npiv_vports, NULL);
- if (!fw_major_version && ql2xallocfwdump)
+ if (!fw_major_version && ql2xallocfwdump
+ && !IS_QLA82XX(ha))
qla2x00_alloc_fw_dump(vha);
}
} else {
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index dbec89622a0..a4b267e60a3 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -120,11 +120,10 @@ qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha)
* Returns a pointer to the continuation type 1 IOCB packet.
*/
static inline cont_a64_entry_t *
-qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha)
+qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha, struct req_que *req)
{
cont_a64_entry_t *cont_pkt;
- struct req_que *req = vha->req;
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
@@ -292,7 +291,7 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt,
* Five DSDs are available in the Continuation
* Type 1 IOCB.
*/
- cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
+ cont_pkt = qla2x00_prep_cont_type1_iocb(vha, vha->req);
cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
avail_dsds = 5;
}
@@ -684,7 +683,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt,
* Five DSDs are available in the Continuation
* Type 1 IOCB.
*/
- cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
+ cont_pkt = qla2x00_prep_cont_type1_iocb(vha, vha->req);
cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
avail_dsds = 5;
}
@@ -2070,7 +2069,8 @@ qla2x00_ct_iocb(srb_t *sp, ms_iocb_entry_t *ct_iocb)
* Five DSDs are available in the Cont.
* Type 1 IOCB.
*/
- cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
+ cont_pkt = qla2x00_prep_cont_type1_iocb(vha,
+ vha->hw->req_q_map[0]);
cur_dsd = (uint32_t *) cont_pkt->dseg_0_address;
avail_dsds = 5;
cont_iocb_prsnt = 1;
@@ -2096,6 +2096,7 @@ qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb)
int index;
uint16_t tot_dsds;
scsi_qla_host_t *vha = sp->fcport->vha;
+ struct qla_hw_data *ha = vha->hw;
struct fc_bsg_job *bsg_job = ((struct srb_ctx *)sp->ctx)->u.bsg_job;
int loop_iterartion = 0;
int cont_iocb_prsnt = 0;
@@ -2141,7 +2142,8 @@ qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb)
* Five DSDs are available in the Cont.
* Type 1 IOCB.
*/
- cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
+ cont_pkt = qla2x00_prep_cont_type1_iocb(vha,
+ ha->req_q_map[0]);
cur_dsd = (uint32_t *) cont_pkt->dseg_0_address;
avail_dsds = 5;
cont_iocb_prsnt = 1;
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 2516adf1aee..7b91b290ffd 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1741,7 +1741,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
resid, scsi_bufflen(cp));
cp->result = DID_ERROR << 16 | lscsi_status;
- break;
+ goto check_scsi_status;
}
if (!lscsi_status &&
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 3b3cec9f6ac..82a33533ed2 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -79,8 +79,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
mcp->mb[0] = MBS_LINK_DOWN_ERROR;
ql_log(ql_log_warn, base_vha, 0x1004,
"FW hung = %d.\n", ha->flags.isp82xx_fw_hung);
- rval = QLA_FUNCTION_FAILED;
- goto premature_exit;
+ return QLA_FUNCTION_TIMEOUT;
}
/*
@@ -163,6 +162,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
HINT_MBX_INT_PENDING) {
spin_unlock_irqrestore(&ha->hardware_lock,
flags);
+ ha->flags.mbox_busy = 0;
ql_dbg(ql_dbg_mbx, base_vha, 0x1010,
"Pending mailbox timeout, exiting.\n");
rval = QLA_FUNCTION_TIMEOUT;
@@ -188,6 +188,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
HINT_MBX_INT_PENDING) {
spin_unlock_irqrestore(&ha->hardware_lock,
flags);
+ ha->flags.mbox_busy = 0;
ql_dbg(ql_dbg_mbx, base_vha, 0x1012,
"Pending mailbox timeout, exiting.\n");
rval = QLA_FUNCTION_TIMEOUT;
@@ -302,7 +303,15 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) &&
!test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) &&
!test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-
+ if (IS_QLA82XX(ha)) {
+ ql_dbg(ql_dbg_mbx, vha, 0x112a,
+ "disabling pause transmit on port "
+ "0 & 1.\n");
+ qla82xx_wr_32(ha,
+ QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0|
+ CRB_NIU_XG_PAUSE_CTL_P1);
+ }
ql_log(ql_log_info, base_vha, 0x101c,
"Mailbox cmd timeout occured. "
"Scheduling ISP abort eeh_busy=0x%x.\n",
@@ -318,7 +327,15 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) &&
!test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) &&
!test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-
+ if (IS_QLA82XX(ha)) {
+ ql_dbg(ql_dbg_mbx, vha, 0x112b,
+ "disabling pause transmit on port "
+ "0 & 1.\n");
+ qla82xx_wr_32(ha,
+ QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0|
+ CRB_NIU_XG_PAUSE_CTL_P1);
+ }
ql_log(ql_log_info, base_vha, 0x101e,
"Mailbox cmd timeout occured. "
"Scheduling ISP abort.\n");
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 94bded5ddce..03554934b0a 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -3817,6 +3817,20 @@ exit:
return rval;
}
+void qla82xx_clear_pending_mbx(scsi_qla_host_t *vha)
+{
+ struct qla_hw_data *ha = vha->hw;
+
+ if (ha->flags.mbox_busy) {
+ ha->flags.mbox_int = 1;
+ ha->flags.mbox_busy = 0;
+ ql_log(ql_log_warn, vha, 0x6010,
+ "Doing premature completion of mbx command.\n");
+ if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags))
+ complete(&ha->mbx_intr_comp);
+ }
+}
+
void qla82xx_watchdog(scsi_qla_host_t *vha)
{
uint32_t dev_state, halt_status;
@@ -3839,9 +3853,13 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
qla2xxx_wake_dpc(vha);
} else {
if (qla82xx_check_fw_alive(vha)) {
+ ql_dbg(ql_dbg_timer, vha, 0x6011,
+ "disabling pause transmit on port 0 & 1.\n");
+ qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+ CRB_NIU_XG_PAUSE_CTL_P0|CRB_NIU_XG_PAUSE_CTL_P1);
halt_status = qla82xx_rd_32(ha,
QLA82XX_PEG_HALT_STATUS1);
- ql_dbg(ql_dbg_timer, vha, 0x6005,
+ ql_log(ql_log_info, vha, 0x6005,
"dumping hw/fw registers:.\n "
" PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,.\n "
" PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,.\n "
@@ -3858,6 +3876,11 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
QLA82XX_CRB_PEG_NET_3 + 0x3c),
qla82xx_rd_32(ha,
QLA82XX_CRB_PEG_NET_4 + 0x3c));
+ if (LSW(MSB(halt_status)) == 0x67)
+ ql_log(ql_log_warn, vha, 0xb052,
+ "Firmware aborted with "
+ "error code 0x00006700. Device is "
+ "being reset.\n");
if (halt_status & HALT_STATUS_UNRECOVERABLE) {
set_bit(ISP_UNRECOVERABLE,
&vha->dpc_flags);
@@ -3869,16 +3892,8 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
}
qla2xxx_wake_dpc(vha);
ha->flags.isp82xx_fw_hung = 1;
- if (ha->flags.mbox_busy) {
- ha->flags.mbox_int = 1;
- ql_log(ql_log_warn, vha, 0x6007,
- "Due to FW hung, doing "
- "premature completion of mbx "
- "command.\n");
- if (test_bit(MBX_INTR_WAIT,
- &ha->mbx_cmd_flags))
- complete(&ha->mbx_intr_comp);
- }
+ ql_log(ql_log_warn, vha, 0x6007, "Firmware hung.\n");
+ qla82xx_clear_pending_mbx(vha);
}
}
}
@@ -4073,10 +4088,7 @@ qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha)
msleep(1000);
if (qla82xx_check_fw_alive(vha)) {
ha->flags.isp82xx_fw_hung = 1;
- if (ha->flags.mbox_busy) {
- ha->flags.mbox_int = 1;
- complete(&ha->mbx_intr_comp);
- }
+ qla82xx_clear_pending_mbx(vha);
break;
}
}
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index 57820c199bc..57a226be339 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -1173,4 +1173,8 @@ struct qla82xx_md_entry_queue {
static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8, 0x410000AC,
0x410000B8, 0x410000BC };
+
+#define CRB_NIU_XG_PAUSE_CTL_P0 0x1
+#define CRB_NIU_XG_PAUSE_CTL_P1 0x8
+
#endif
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index fd14c7bfc62..f9e5b85e84d 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -201,12 +201,12 @@ MODULE_PARM_DESC(ql2xmdcapmask,
"Set the Minidump driver capture mask level. "
"Default is 0x7F - Can be set to 0x3, 0x7, 0xF, 0x1F, 0x7F.");
-int ql2xmdenable;
+int ql2xmdenable = 1;
module_param(ql2xmdenable, int, S_IRUGO);
MODULE_PARM_DESC(ql2xmdenable,
"Enable/disable MiniDump. "
- "0 (Default) - MiniDump disabled. "
- "1 - MiniDump enabled.");
+ "0 - MiniDump disabled. "
+ "1 (Default) - MiniDump enabled.");
/*
* SCSI host template entry points
@@ -423,6 +423,7 @@ fail2:
qla25xx_delete_queues(vha);
destroy_workqueue(ha->wq);
ha->wq = NULL;
+ vha->req = ha->req_q_map[0];
fail:
ha->mqenable = 0;
kfree(ha->req_q_map);
@@ -814,49 +815,6 @@ qla2x00_wait_for_chip_reset(scsi_qla_host_t *vha)
return return_status;
}
-/*
- * qla2x00_wait_for_loop_ready
- * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
- * to be in LOOP_READY state.
- * Input:
- * ha - pointer to host adapter structure
- *
- * Note:
- * Does context switching-Release SPIN_LOCK
- * (if any) before calling this routine.
- *
- *
- * Return:
- * Success (LOOP_READY) : 0
- * Failed (LOOP_NOT_READY) : 1
- */
-static inline int
-qla2x00_wait_for_loop_ready(scsi_qla_host_t *vha)
-{
- int return_status = QLA_SUCCESS;
- unsigned long loop_timeout ;
- struct qla_hw_data *ha = vha->hw;
- scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
-
- /* wait for 5 min at the max for loop to be ready */
- loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
-
- while ((!atomic_read(&base_vha->loop_down_timer) &&
- atomic_read(&base_vha->loop_state) == LOOP_DOWN) ||
- atomic_read(&base_vha->loop_state) != LOOP_READY) {
- if (atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
- return_status = QLA_FUNCTION_FAILED;
- break;
- }
- msleep(1000);
- if (time_after_eq(jiffies, loop_timeout)) {
- return_status = QLA_FUNCTION_FAILED;
- break;
- }
- }
- return (return_status);
-}
-
static void
sp_get(struct srb *sp)
{
@@ -1035,12 +993,6 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
"Wait for hba online failed for cmd=%p.\n", cmd);
goto eh_reset_failed;
}
- err = 1;
- if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS) {
- ql_log(ql_log_warn, vha, 0x800b,
- "Wait for loop ready failed for cmd=%p.\n", cmd);
- goto eh_reset_failed;
- }
err = 2;
if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1)
!= QLA_SUCCESS) {
@@ -1137,10 +1089,9 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
goto eh_bus_reset_done;
}
- if (qla2x00_wait_for_loop_ready(vha) == QLA_SUCCESS) {
- if (qla2x00_loop_reset(vha) == QLA_SUCCESS)
- ret = SUCCESS;
- }
+ if (qla2x00_loop_reset(vha) == QLA_SUCCESS)
+ ret = SUCCESS;
+
if (ret == FAILED)
goto eh_bus_reset_done;
@@ -1206,15 +1157,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
if (qla2x00_wait_for_reset_ready(vha) != QLA_SUCCESS)
goto eh_host_reset_lock;
- /*
- * Fixme-may be dpc thread is active and processing
- * loop_resync,so wait a while for it to
- * be completed and then issue big hammer.Otherwise
- * it may cause I/O failure as big hammer marks the
- * devices as lost kicking of the port_down_timer
- * while dpc is stuck for the mailbox to complete.
- */
- qla2x00_wait_for_loop_ready(vha);
if (vha != base_vha) {
if (qla2x00_vp_abort_isp(vha))
goto eh_host_reset_lock;
@@ -1297,16 +1239,13 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
atomic_set(&vha->loop_state, LOOP_DOWN);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
qla2x00_mark_all_devices_lost(vha, 0);
- qla2x00_wait_for_loop_ready(vha);
}
if (ha->flags.enable_lip_reset) {
ret = qla2x00_lip_reset(vha);
- if (ret != QLA_SUCCESS) {
+ if (ret != QLA_SUCCESS)
ql_dbg(ql_dbg_taskm, vha, 0x802e,
"lip_reset failed (%d).\n", ret);
- } else
- qla2x00_wait_for_loop_ready(vha);
}
/* Issue marker command only when we are going to start the I/O */
@@ -4070,13 +4009,8 @@ qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
/* For ISP82XX complete any pending mailbox cmd */
if (IS_QLA82XX(ha)) {
ha->flags.isp82xx_fw_hung = 1;
- if (ha->flags.mbox_busy) {
- ha->flags.mbox_int = 1;
- ql_dbg(ql_dbg_aer, vha, 0x9001,
- "Due to pci channel io frozen, doing premature "
- "completion of mbx command.\n");
- complete(&ha->mbx_intr_comp);
- }
+ ql_dbg(ql_dbg_aer, vha, 0x9001, "Pci channel io frozen\n");
+ qla82xx_clear_pending_mbx(vha);
}
qla2x00_free_irqs(vha);
pci_disable_device(pdev);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 13b6357c1fa..23f33a6d52d 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.07.07-k"
+#define QLA2XXX_VERSION "8.03.07.12-k"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index ace637bf254..fd5edc6e166 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -147,7 +147,7 @@
#define ISCSI_ALIAS_SIZE 32 /* ISCSI Alias name size */
#define ISCSI_NAME_SIZE 0xE0 /* ISCSI Name size */
-#define QL4_SESS_RECOVERY_TMO 30 /* iSCSI session */
+#define QL4_SESS_RECOVERY_TMO 120 /* iSCSI session */
/* recovery timeout */
#define LSDW(x) ((u32)((u64)(x)))
@@ -173,6 +173,8 @@
#define ISNS_DEREG_TOV 5
#define HBA_ONLINE_TOV 30
#define DISABLE_ACB_TOV 30
+#define IP_CONFIG_TOV 30
+#define LOGIN_TOV 12
#define MAX_RESET_HA_RETRIES 2
@@ -240,6 +242,45 @@ struct ddb_entry {
uint16_t fw_ddb_index; /* DDB firmware index */
uint32_t fw_ddb_device_state; /* F/W Device State -- see ql4_fw.h */
+ uint16_t ddb_type;
+#define FLASH_DDB 0x01
+
+ struct dev_db_entry fw_ddb_entry;
+ int (*unblock_sess)(struct iscsi_cls_session *cls_session);
+ int (*ddb_change)(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+ struct ddb_entry *ddb_entry, uint32_t state);
+
+ /* Driver Re-login */
+ unsigned long flags; /* DDB Flags */
+ uint16_t default_relogin_timeout; /* Max time to wait for
+ * relogin to complete */
+ atomic_t retry_relogin_timer; /* Min Time between relogins
+ * (4000 only) */
+ atomic_t relogin_timer; /* Max Time to wait for
+ * relogin to complete */
+ atomic_t relogin_retry_count; /* Num of times relogin has been
+ * retried */
+ uint32_t default_time2wait; /* Default Min time between
+ * relogins (+aens) */
+
+};
+
+struct qla_ddb_index {
+ struct list_head list;
+ uint16_t fw_ddb_idx;
+ struct dev_db_entry fw_ddb;
+};
+
+#define DDB_IPADDR_LEN 64
+
+struct ql4_tuple_ddb {
+ int port;
+ int tpgt;
+ char ip_addr[DDB_IPADDR_LEN];
+ char iscsi_name[ISCSI_NAME_SIZE];
+ uint16_t options;
+#define DDB_OPT_IPV6 0x0e0e
+#define DDB_OPT_IPV4 0x0f0f
};
/*
@@ -411,7 +452,7 @@ struct scsi_qla_host {
#define AF_FW_RECOVERY 19 /* 0x00080000 */
#define AF_EEH_BUSY 20 /* 0x00100000 */
#define AF_PCI_CHANNEL_IO_PERM_FAILURE 21 /* 0x00200000 */
-
+#define AF_BUILD_DDB_LIST 22 /* 0x00400000 */
unsigned long dpc_flags;
#define DPC_RESET_HA 1 /* 0x00000002 */
@@ -604,6 +645,7 @@ struct scsi_qla_host {
uint16_t bootload_minor;
uint16_t bootload_patch;
uint16_t bootload_build;
+ uint16_t def_timeout; /* Default login timeout */
uint32_t flash_state;
#define QLFLASH_WAITING 0
@@ -623,6 +665,11 @@ struct scsi_qla_host {
uint16_t iscsi_pci_func_cnt;
uint8_t model_name[16];
struct completion disable_acb_comp;
+ struct dma_pool *fw_ddb_dma_pool;
+#define DDB_DMA_BLOCK_SIZE 512
+ uint16_t pri_ddb_idx;
+ uint16_t sec_ddb_idx;
+ int is_reset;
};
struct ql4_task_data {
@@ -835,6 +882,10 @@ static inline int ql4xxx_reset_active(struct scsi_qla_host *ha)
/*---------------------------------------------------------------------------*/
/* Defines for qla4xxx_initialize_adapter() and qla4xxx_recover_adapter() */
+
+#define INIT_ADAPTER 0
+#define RESET_ADAPTER 1
+
#define PRESERVE_DDB_LIST 0
#define REBUILD_DDB_LIST 1
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index cbd5a20dbbd..4ac07f88252 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -12,6 +12,7 @@
#define MAX_PRST_DEV_DB_ENTRIES 64
#define MIN_DISC_DEV_DB_ENTRY MAX_PRST_DEV_DB_ENTRIES
#define MAX_DEV_DB_ENTRIES 512
+#define MAX_DEV_DB_ENTRIES_40XX 256
/*************************************************************************
*
@@ -604,6 +605,13 @@ struct addr_ctrl_blk {
uint8_t res14[140]; /* 274-2FF */
};
+#define IP_ADDR_COUNT 4 /* Total 4 IP address supported in one interface
+ * One IPv4, one IPv6 link local and 2 IPv6
+ */
+
+#define IP_STATE_MASK 0x0F000000
+#define IP_STATE_SHIFT 24
+
struct init_fw_ctrl_blk {
struct addr_ctrl_blk pri;
/* struct addr_ctrl_blk sec;*/
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 160db9d5ea2..d0dd4b33020 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -13,7 +13,7 @@ struct iscsi_cls_conn;
int qla4xxx_hw_reset(struct scsi_qla_host *ha);
int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a);
int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb *srb);
-int qla4xxx_initialize_adapter(struct scsi_qla_host *ha);
+int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset);
int qla4xxx_soft_reset(struct scsi_qla_host *ha);
irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id);
@@ -153,10 +153,13 @@ int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
uint32_t *mbx_sts);
int qla4xxx_clear_ddb_entry(struct scsi_qla_host *ha, uint32_t fw_ddb_index);
int qla4xxx_send_passthru0(struct iscsi_task *task);
+void qla4xxx_free_ddb_index(struct scsi_qla_host *ha);
int qla4xxx_get_mgmt_data(struct scsi_qla_host *ha, uint16_t fw_ddb_index,
uint16_t stats_size, dma_addr_t stats_dma);
void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha,
struct ddb_entry *ddb_entry);
+void qla4xxx_update_session_conn_fwddb_param(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry);
int qla4xxx_bootdb_by_index(struct scsi_qla_host *ha,
struct dev_db_entry *fw_ddb_entry,
dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index);
@@ -169,11 +172,22 @@ int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma,
int qla4xxx_restore_factory_defaults(struct scsi_qla_host *ha,
uint32_t region, uint32_t field0,
uint32_t field1);
+int qla4xxx_get_ddb_index(struct scsi_qla_host *ha, uint16_t *ddb_index);
+void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session);
+int qla4xxx_unblock_ddb(struct iscsi_cls_session *cls_session);
+int qla4xxx_unblock_flash_ddb(struct iscsi_cls_session *cls_session);
+int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+ struct ddb_entry *ddb_entry, uint32_t state);
+int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+ struct ddb_entry *ddb_entry, uint32_t state);
+void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset);
/* BSG Functions */
int qla4xxx_bsg_request(struct bsg_job *bsg_job);
int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job);
+void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry);
+
extern int ql4xextended_error_logging;
extern int ql4xdontresethba;
extern int ql4xenablemsix;
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 3075fbaef55..1bdfa8120ac 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -773,22 +773,24 @@ int qla4xxx_start_firmware(struct scsi_qla_host *ha)
* be freed so that when login happens from user space there are free DDB
* indices available.
**/
-static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
+void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
{
int max_ddbs;
int ret;
uint32_t idx = 0, next_idx = 0;
uint32_t state = 0, conn_err = 0;
- max_ddbs = is_qla40XX(ha) ? MAX_PRST_DEV_DB_ENTRIES :
+ max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX :
MAX_DEV_DB_ENTRIES;
for (idx = 0; idx < max_ddbs; idx = next_idx) {
ret = qla4xxx_get_fwddb_entry(ha, idx, NULL, 0, NULL,
&next_idx, &state, &conn_err,
NULL, NULL);
- if (ret == QLA_ERROR)
+ if (ret == QLA_ERROR) {
+ next_idx++;
continue;
+ }
if (state == DDB_DS_NO_CONNECTION_ACTIVE ||
state == DDB_DS_SESSION_FAILED) {
DEBUG2(ql4_printk(KERN_INFO, ha,
@@ -804,7 +806,6 @@ static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
}
}
-
/**
* qla4xxx_initialize_adapter - initiailizes hba
* @ha: Pointer to host adapter structure.
@@ -812,7 +813,7 @@ static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha)
* This routine parforms all of the steps necessary to initialize the adapter.
*
**/
-int qla4xxx_initialize_adapter(struct scsi_qla_host *ha)
+int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset)
{
int status = QLA_ERROR;
@@ -840,7 +841,8 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha)
if (status == QLA_ERROR)
goto exit_init_hba;
- qla4xxx_free_ddb_index(ha);
+ if (is_reset == RESET_ADAPTER)
+ qla4xxx_build_ddb_list(ha, is_reset);
set_bit(AF_ONLINE, &ha->flags);
exit_init_hba:
@@ -855,38 +857,12 @@ exit_init_hba:
return status;
}
-/**
- * qla4xxx_process_ddb_changed - process ddb state change
- * @ha - Pointer to host adapter structure.
- * @fw_ddb_index - Firmware's device database index
- * @state - Device state
- *
- * This routine processes a Decive Database Changed AEN Event.
- **/
-int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
- uint32_t state, uint32_t conn_err)
+int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+ struct ddb_entry *ddb_entry, uint32_t state)
{
- struct ddb_entry * ddb_entry;
uint32_t old_fw_ddb_device_state;
int status = QLA_ERROR;
- /* check for out of range index */
- if (fw_ddb_index >= MAX_DDB_ENTRIES)
- goto exit_ddb_event;
-
- /* Get the corresponging ddb entry */
- ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
- /* Device does not currently exist in our database. */
- if (ddb_entry == NULL) {
- ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n",
- __func__, fw_ddb_index);
-
- if (state == DDB_DS_NO_CONNECTION_ACTIVE)
- clear_bit(fw_ddb_index, ha->ddb_idx_map);
-
- goto exit_ddb_event;
- }
-
old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state;
DEBUG2(ql4_printk(KERN_INFO, ha,
"%s: DDB - old state = 0x%x, new state = 0x%x for "
@@ -900,9 +876,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
switch (state) {
case DDB_DS_SESSION_ACTIVE:
case DDB_DS_DISCOVERY:
- iscsi_conn_start(ddb_entry->conn);
- iscsi_conn_login_event(ddb_entry->conn,
- ISCSI_CONN_STATE_LOGGED_IN);
+ ddb_entry->unblock_sess(ddb_entry->sess);
qla4xxx_update_session_conn_param(ha, ddb_entry);
status = QLA_SUCCESS;
break;
@@ -936,9 +910,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
switch (state) {
case DDB_DS_SESSION_ACTIVE:
case DDB_DS_DISCOVERY:
- iscsi_conn_start(ddb_entry->conn);
- iscsi_conn_login_event(ddb_entry->conn,
- ISCSI_CONN_STATE_LOGGED_IN);
+ ddb_entry->unblock_sess(ddb_entry->sess);
qla4xxx_update_session_conn_param(ha, ddb_entry);
status = QLA_SUCCESS;
break;
@@ -954,7 +926,198 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
__func__));
break;
}
+ return status;
+}
+
+void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry)
+{
+ /*
+ * This triggers a relogin. After the relogin_timer
+ * expires, the relogin gets scheduled. We must wait a
+ * minimum amount of time since receiving an 0x8014 AEN
+ * with failed device_state or a logout response before
+ * we can issue another relogin.
+ *
+ * Firmware pads this timeout: (time2wait +1).
+ * Driver retry to login should be longer than F/W.
+ * Otherwise F/W will fail
+ * set_ddb() mbx cmd with 0x4005 since it still
+ * counting down its time2wait.
+ */
+ atomic_set(&ddb_entry->relogin_timer, 0);
+ atomic_set(&ddb_entry->retry_relogin_timer,
+ ddb_entry->default_time2wait + 4);
+
+}
+
+int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
+ struct ddb_entry *ddb_entry, uint32_t state)
+{
+ uint32_t old_fw_ddb_device_state;
+ int status = QLA_ERROR;
+
+ old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state;
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: DDB - old state = 0x%x, new state = 0x%x for "
+ "index [%d]\n", __func__,
+ ddb_entry->fw_ddb_device_state, state, fw_ddb_index));
+
+ ddb_entry->fw_ddb_device_state = state;
+
+ switch (old_fw_ddb_device_state) {
+ case DDB_DS_LOGIN_IN_PROCESS:
+ case DDB_DS_NO_CONNECTION_ACTIVE:
+ switch (state) {
+ case DDB_DS_SESSION_ACTIVE:
+ ddb_entry->unblock_sess(ddb_entry->sess);
+ qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ case DDB_DS_SESSION_FAILED:
+ iscsi_block_session(ddb_entry->sess);
+ if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+ qla4xxx_arm_relogin_timer(ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ }
+ break;
+ case DDB_DS_SESSION_ACTIVE:
+ switch (state) {
+ case DDB_DS_SESSION_FAILED:
+ iscsi_block_session(ddb_entry->sess);
+ if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+ qla4xxx_arm_relogin_timer(ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ }
+ break;
+ case DDB_DS_SESSION_FAILED:
+ switch (state) {
+ case DDB_DS_SESSION_ACTIVE:
+ ddb_entry->unblock_sess(ddb_entry->sess);
+ qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ case DDB_DS_SESSION_FAILED:
+ if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+ qla4xxx_arm_relogin_timer(ddb_entry);
+ status = QLA_SUCCESS;
+ break;
+ }
+ break;
+ default:
+ DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n",
+ __func__));
+ break;
+ }
+ return status;
+}
+
+/**
+ * qla4xxx_process_ddb_changed - process ddb state change
+ * @ha - Pointer to host adapter structure.
+ * @fw_ddb_index - Firmware's device database index
+ * @state - Device state
+ *
+ * This routine processes a Decive Database Changed AEN Event.
+ **/
+int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha,
+ uint32_t fw_ddb_index,
+ uint32_t state, uint32_t conn_err)
+{
+ struct ddb_entry *ddb_entry;
+ int status = QLA_ERROR;
+
+ /* check for out of range index */
+ if (fw_ddb_index >= MAX_DDB_ENTRIES)
+ goto exit_ddb_event;
+
+ /* Get the corresponging ddb entry */
+ ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
+ /* Device does not currently exist in our database. */
+ if (ddb_entry == NULL) {
+ ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n",
+ __func__, fw_ddb_index);
+
+ if (state == DDB_DS_NO_CONNECTION_ACTIVE)
+ clear_bit(fw_ddb_index, ha->ddb_idx_map);
+
+ goto exit_ddb_event;
+ }
+
+ ddb_entry->ddb_change(ha, fw_ddb_index, ddb_entry, state);
exit_ddb_event:
return status;
}
+
+/**
+ * qla4xxx_login_flash_ddb - Login to target (DDB)
+ * @cls_session: Pointer to the session to login
+ *
+ * This routine logins to the target.
+ * Issues setddb and conn open mbx
+ **/
+void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session)
+{
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
+ struct dev_db_entry *fw_ddb_entry = NULL;
+ dma_addr_t fw_ddb_dma;
+ uint32_t mbx_sts = 0;
+ int ret;
+
+ sess = cls_session->dd_data;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+
+ if (!test_bit(AF_LINK_UP, &ha->flags))
+ return;
+
+ if (ddb_entry->ddb_type != FLASH_DDB) {
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Skipping login to non FLASH DB"));
+ goto exit_login;
+ }
+
+ fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL,
+ &fw_ddb_dma);
+ if (fw_ddb_entry == NULL) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
+ goto exit_login;
+ }
+
+ if (ddb_entry->fw_ddb_index == INVALID_ENTRY) {
+ ret = qla4xxx_get_ddb_index(ha, &ddb_entry->fw_ddb_index);
+ if (ret == QLA_ERROR)
+ goto exit_login;
+
+ ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry;
+ ha->tot_ddbs++;
+ }
+
+ memcpy(fw_ddb_entry, &ddb_entry->fw_ddb_entry,
+ sizeof(struct dev_db_entry));
+ ddb_entry->sess->target_id = ddb_entry->fw_ddb_index;
+
+ ret = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index,
+ fw_ddb_dma, &mbx_sts);
+ if (ret == QLA_ERROR) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "Set DDB failed\n"));
+ goto exit_login;
+ }
+
+ ddb_entry->fw_ddb_device_state = DDB_DS_LOGIN_IN_PROCESS;
+ ret = qla4xxx_conn_open(ha, ddb_entry->fw_ddb_index);
+ if (ret == QLA_ERROR) {
+ ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__,
+ sess->targetname);
+ goto exit_login;
+ }
+
+exit_login:
+ if (fw_ddb_entry)
+ dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma);
+}
+
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 4c2b8487039..c2593782fbb 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -41,6 +41,16 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
return status;
}
+ if (is_qla40XX(ha)) {
+ if (test_bit(AF_HA_REMOVAL, &ha->flags)) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: "
+ "prematurely completing mbx cmd as "
+ "adapter removal detected\n",
+ ha->host_no, __func__));
+ return status;
+ }
+ }
+
if (is_qla8022(ha)) {
if (test_bit(AF_FW_RECOVERY, &ha->flags)) {
DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: "
@@ -413,6 +423,7 @@ qla4xxx_update_local_ifcb(struct scsi_qla_host *ha,
memcpy(ha->name_string, init_fw_cb->iscsi_name,
min(sizeof(ha->name_string),
sizeof(init_fw_cb->iscsi_name)));
+ ha->def_timeout = le16_to_cpu(init_fw_cb->def_timeout);
/*memcpy(ha->alias, init_fw_cb->Alias,
min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 30f31b127f3..4169c8baa11 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -8,6 +8,7 @@
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/iscsi_boot_sysfs.h>
+#include <linux/inet.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
@@ -31,6 +32,13 @@ static struct kmem_cache *srb_cachep;
/*
* Module parameter information and variables
*/
+int ql4xdisablesysfsboot = 1;
+module_param(ql4xdisablesysfsboot, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ql4xdisablesysfsboot,
+ "Set to disable exporting boot targets to sysfs\n"
+ " 0 - Export boot targets\n"
+ " 1 - Do not export boot targets (Default)");
+
int ql4xdontresethba = 0;
module_param(ql4xdontresethba, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(ql4xdontresethba,
@@ -63,7 +71,7 @@ static int ql4xsess_recovery_tmo = QL4_SESS_RECOVERY_TMO;
module_param(ql4xsess_recovery_tmo, int, S_IRUGO);
MODULE_PARM_DESC(ql4xsess_recovery_tmo,
"Target Session Recovery Timeout.\n"
- " Default: 30 sec.");
+ " Default: 120 sec.");
static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha);
/*
@@ -415,7 +423,7 @@ static int qla4xxx_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
qla_ep = ep->dd_data;
ha = to_qla_host(qla_ep->host);
- if (adapter_up(ha))
+ if (adapter_up(ha) && !test_bit(AF_BUILD_DDB_LIST, &ha->flags))
ret = 1;
return ret;
@@ -975,6 +983,150 @@ static int qla4xxx_conn_get_param(struct iscsi_cls_conn *cls_conn,
}
+int qla4xxx_get_ddb_index(struct scsi_qla_host *ha, uint16_t *ddb_index)
+{
+ uint32_t mbx_sts = 0;
+ uint16_t tmp_ddb_index;
+ int ret;
+
+get_ddb_index:
+ tmp_ddb_index = find_first_zero_bit(ha->ddb_idx_map, MAX_DDB_ENTRIES);
+
+ if (tmp_ddb_index >= MAX_DDB_ENTRIES) {
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Free DDB index not available\n"));
+ ret = QLA_ERROR;
+ goto exit_get_ddb_index;
+ }
+
+ if (test_and_set_bit(tmp_ddb_index, ha->ddb_idx_map))
+ goto get_ddb_index;
+
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Found a free DDB index at %d\n", tmp_ddb_index));
+ ret = qla4xxx_req_ddb_entry(ha, tmp_ddb_index, &mbx_sts);
+ if (ret == QLA_ERROR) {
+ if (mbx_sts == MBOX_STS_COMMAND_ERROR) {
+ ql4_printk(KERN_INFO, ha,
+ "DDB index = %d not available trying next\n",
+ tmp_ddb_index);
+ goto get_ddb_index;
+ }
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Free FW DDB not available\n"));
+ }
+
+ *ddb_index = tmp_ddb_index;
+
+exit_get_ddb_index:
+ return ret;
+}
+
+static int qla4xxx_match_ipaddress(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry,
+ char *existing_ipaddr,
+ char *user_ipaddr)
+{
+ uint8_t dst_ipaddr[IPv6_ADDR_LEN];
+ char formatted_ipaddr[DDB_IPADDR_LEN];
+ int status = QLA_SUCCESS, ret = 0;
+
+ if (ddb_entry->fw_ddb_entry.options & DDB_OPT_IPV6_DEVICE) {
+ ret = in6_pton(user_ipaddr, strlen(user_ipaddr), dst_ipaddr,
+ '\0', NULL);
+ if (ret == 0) {
+ status = QLA_ERROR;
+ goto out_match;
+ }
+ ret = sprintf(formatted_ipaddr, "%pI6", dst_ipaddr);
+ } else {
+ ret = in4_pton(user_ipaddr, strlen(user_ipaddr), dst_ipaddr,
+ '\0', NULL);
+ if (ret == 0) {
+ status = QLA_ERROR;
+ goto out_match;
+ }
+ ret = sprintf(formatted_ipaddr, "%pI4", dst_ipaddr);
+ }
+
+ if (strcmp(existing_ipaddr, formatted_ipaddr))
+ status = QLA_ERROR;
+
+out_match:
+ return status;
+}
+
+static int qla4xxx_match_fwdb_session(struct scsi_qla_host *ha,
+ struct iscsi_cls_conn *cls_conn)
+{
+ int idx = 0, max_ddbs, rval;
+ struct iscsi_cls_session *cls_sess = iscsi_conn_to_session(cls_conn);
+ struct iscsi_session *sess, *existing_sess;
+ struct iscsi_conn *conn, *existing_conn;
+ struct ddb_entry *ddb_entry;
+
+ sess = cls_sess->dd_data;
+ conn = cls_conn->dd_data;
+
+ if (sess->targetname == NULL ||
+ conn->persistent_address == NULL ||
+ conn->persistent_port == 0)
+ return QLA_ERROR;
+
+ max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX :
+ MAX_DEV_DB_ENTRIES;
+
+ for (idx = 0; idx < max_ddbs; idx++) {
+ ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx);
+ if (ddb_entry == NULL)
+ continue;
+
+ if (ddb_entry->ddb_type != FLASH_DDB)
+ continue;
+
+ existing_sess = ddb_entry->sess->dd_data;
+ existing_conn = ddb_entry->conn->dd_data;
+
+ if (existing_sess->targetname == NULL ||
+ existing_conn->persistent_address == NULL ||
+ existing_conn->persistent_port == 0)
+ continue;
+
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "IQN = %s User IQN = %s\n",
+ existing_sess->targetname,
+ sess->targetname));
+
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "IP = %s User IP = %s\n",
+ existing_conn->persistent_address,
+ conn->persistent_address));
+
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Port = %d User Port = %d\n",
+ existing_conn->persistent_port,
+ conn->persistent_port));
+
+ if (strcmp(existing_sess->targetname, sess->targetname))
+ continue;
+ rval = qla4xxx_match_ipaddress(ha, ddb_entry,
+ existing_conn->persistent_address,
+ conn->persistent_address);
+ if (rval == QLA_ERROR)
+ continue;
+ if (existing_conn->persistent_port != conn->persistent_port)
+ continue;
+ break;
+ }
+
+ if (idx == max_ddbs)
+ return QLA_ERROR;
+
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Match found in fwdb sessions\n"));
+ return QLA_SUCCESS;
+}
+
static struct iscsi_cls_session *
qla4xxx_session_create(struct iscsi_endpoint *ep,
uint16_t cmds_max, uint16_t qdepth,
@@ -984,8 +1136,7 @@ qla4xxx_session_create(struct iscsi_endpoint *ep,
struct scsi_qla_host *ha;
struct qla_endpoint *qla_ep;
struct ddb_entry *ddb_entry;
- uint32_t ddb_index;
- uint32_t mbx_sts = 0;
+ uint16_t ddb_index;
struct iscsi_session *sess;
struct sockaddr *dst_addr;
int ret;
@@ -1000,32 +1151,9 @@ qla4xxx_session_create(struct iscsi_endpoint *ep,
dst_addr = (struct sockaddr *)&qla_ep->dst_addr;
ha = to_qla_host(qla_ep->host);
-get_ddb_index:
- ddb_index = find_first_zero_bit(ha->ddb_idx_map, MAX_DDB_ENTRIES);
-
- if (ddb_index >= MAX_DDB_ENTRIES) {
- DEBUG2(ql4_printk(KERN_INFO, ha,
- "Free DDB index not available\n"));
- return NULL;
- }
-
- if (test_and_set_bit(ddb_index, ha->ddb_idx_map))
- goto get_ddb_index;
-
- DEBUG2(ql4_printk(KERN_INFO, ha,
- "Found a free DDB index at %d\n", ddb_index));
- ret = qla4xxx_req_ddb_entry(ha, ddb_index, &mbx_sts);
- if (ret == QLA_ERROR) {
- if (mbx_sts == MBOX_STS_COMMAND_ERROR) {
- ql4_printk(KERN_INFO, ha,
- "DDB index = %d not available trying next\n",
- ddb_index);
- goto get_ddb_index;
- }
- DEBUG2(ql4_printk(KERN_INFO, ha,
- "Free FW DDB not available\n"));
+ ret = qla4xxx_get_ddb_index(ha, &ddb_index);
+ if (ret == QLA_ERROR)
return NULL;
- }
cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, qla_ep->host,
cmds_max, sizeof(struct ddb_entry),
@@ -1040,6 +1168,8 @@ get_ddb_index:
ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE;
ddb_entry->ha = ha;
ddb_entry->sess = cls_sess;
+ ddb_entry->unblock_sess = qla4xxx_unblock_ddb;
+ ddb_entry->ddb_change = qla4xxx_ddb_change;
cls_sess->recovery_tmo = ql4xsess_recovery_tmo;
ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry;
ha->tot_ddbs++;
@@ -1077,6 +1207,9 @@ qla4xxx_conn_create(struct iscsi_cls_session *cls_sess, uint32_t conn_idx)
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
cls_conn = iscsi_conn_setup(cls_sess, sizeof(struct qla_conn),
conn_idx);
+ if (!cls_conn)
+ return NULL;
+
sess = cls_sess->dd_data;
ddb_entry = sess->dd_data;
ddb_entry->conn = cls_conn;
@@ -1109,7 +1242,7 @@ static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn)
struct iscsi_session *sess;
struct ddb_entry *ddb_entry;
struct scsi_qla_host *ha;
- struct dev_db_entry *fw_ddb_entry;
+ struct dev_db_entry *fw_ddb_entry = NULL;
dma_addr_t fw_ddb_entry_dma;
uint32_t mbx_sts = 0;
int ret = 0;
@@ -1120,12 +1253,25 @@ static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn)
ddb_entry = sess->dd_data;
ha = ddb_entry->ha;
+ /* Check if we have matching FW DDB, if yes then do not
+ * login to this target. This could cause target to logout previous
+ * connection
+ */
+ ret = qla4xxx_match_fwdb_session(ha, cls_conn);
+ if (ret == QLA_SUCCESS) {
+ ql4_printk(KERN_INFO, ha,
+ "Session already exist in FW.\n");
+ ret = -EEXIST;
+ goto exit_conn_start;
+ }
+
fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
&fw_ddb_entry_dma, GFP_KERNEL);
if (!fw_ddb_entry) {
ql4_printk(KERN_ERR, ha,
"%s: Unable to allocate dma buffer\n", __func__);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto exit_conn_start;
}
ret = qla4xxx_set_param_ddbentry(ha, ddb_entry, cls_conn, &mbx_sts);
@@ -1138,9 +1284,7 @@ static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn)
if (mbx_sts)
if (ddb_entry->fw_ddb_device_state ==
DDB_DS_SESSION_ACTIVE) {
- iscsi_conn_start(ddb_entry->conn);
- iscsi_conn_login_event(ddb_entry->conn,
- ISCSI_CONN_STATE_LOGGED_IN);
+ ddb_entry->unblock_sess(ddb_entry->sess);
goto exit_set_param;
}
@@ -1167,8 +1311,9 @@ exit_set_param:
ret = 0;
exit_conn_start:
- dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
- fw_ddb_entry, fw_ddb_entry_dma);
+ if (fw_ddb_entry)
+ dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+ fw_ddb_entry, fw_ddb_entry_dma);
return ret;
}
@@ -1344,6 +1489,101 @@ static int qla4xxx_task_xmit(struct iscsi_task *task)
return -ENOSYS;
}
+static void qla4xxx_copy_fwddb_param(struct scsi_qla_host *ha,
+ struct dev_db_entry *fw_ddb_entry,
+ struct iscsi_cls_session *cls_sess,
+ struct iscsi_cls_conn *cls_conn)
+{
+ int buflen = 0;
+ struct iscsi_session *sess;
+ struct iscsi_conn *conn;
+ char ip_addr[DDB_IPADDR_LEN];
+ uint16_t options = 0;
+
+ sess = cls_sess->dd_data;
+ conn = cls_conn->dd_data;
+
+ conn->max_recv_dlength = BYTE_UNITS *
+ le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len);
+
+ conn->max_xmit_dlength = BYTE_UNITS *
+ le16_to_cpu(fw_ddb_entry->iscsi_max_snd_data_seg_len);
+
+ sess->initial_r2t_en =
+ (BIT_10 & le16_to_cpu(fw_ddb_entry->iscsi_options));
+
+ sess->max_r2t = le16_to_cpu(fw_ddb_entry->iscsi_max_outsnd_r2t);
+
+ sess->imm_data_en = (BIT_11 & le16_to_cpu(fw_ddb_entry->iscsi_options));
+
+ sess->first_burst = BYTE_UNITS *
+ le16_to_cpu(fw_ddb_entry->iscsi_first_burst_len);
+
+ sess->max_burst = BYTE_UNITS *
+ le16_to_cpu(fw_ddb_entry->iscsi_max_burst_len);
+
+ sess->time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait);
+
+ sess->time2retain = le16_to_cpu(fw_ddb_entry->iscsi_def_time2retain);
+
+ conn->persistent_port = le16_to_cpu(fw_ddb_entry->port);
+
+ sess->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp);
+
+ options = le16_to_cpu(fw_ddb_entry->options);
+ if (options & DDB_OPT_IPV6_DEVICE)
+ sprintf(ip_addr, "%pI6", fw_ddb_entry->ip_addr);
+ else
+ sprintf(ip_addr, "%pI4", fw_ddb_entry->ip_addr);
+
+ iscsi_set_param(cls_conn, ISCSI_PARAM_TARGET_NAME,
+ (char *)fw_ddb_entry->iscsi_name, buflen);
+ iscsi_set_param(cls_conn, ISCSI_PARAM_INITIATOR_NAME,
+ (char *)ha->name_string, buflen);
+ iscsi_set_param(cls_conn, ISCSI_PARAM_PERSISTENT_ADDRESS,
+ (char *)ip_addr, buflen);
+}
+
+void qla4xxx_update_session_conn_fwddb_param(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry)
+{
+ struct iscsi_cls_session *cls_sess;
+ struct iscsi_cls_conn *cls_conn;
+ uint32_t ddb_state;
+ dma_addr_t fw_ddb_entry_dma;
+ struct dev_db_entry *fw_ddb_entry;
+
+ fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+ &fw_ddb_entry_dma, GFP_KERNEL);
+ if (!fw_ddb_entry) {
+ ql4_printk(KERN_ERR, ha,
+ "%s: Unable to allocate dma buffer\n", __func__);
+ goto exit_session_conn_fwddb_param;
+ }
+
+ if (qla4xxx_get_fwddb_entry(ha, ddb_entry->fw_ddb_index, fw_ddb_entry,
+ fw_ddb_entry_dma, NULL, NULL, &ddb_state,
+ NULL, NULL, NULL) == QLA_ERROR) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed "
+ "get_ddb_entry for fw_ddb_index %d\n",
+ ha->host_no, __func__,
+ ddb_entry->fw_ddb_index));
+ goto exit_session_conn_fwddb_param;
+ }
+
+ cls_sess = ddb_entry->sess;
+
+ cls_conn = ddb_entry->conn;
+
+ /* Update params */
+ qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, cls_conn);
+
+exit_session_conn_fwddb_param:
+ if (fw_ddb_entry)
+ dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+ fw_ddb_entry, fw_ddb_entry_dma);
+}
+
void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha,
struct ddb_entry *ddb_entry)
{
@@ -1360,7 +1600,7 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha,
if (!fw_ddb_entry) {
ql4_printk(KERN_ERR, ha,
"%s: Unable to allocate dma buffer\n", __func__);
- return;
+ goto exit_session_conn_param;
}
if (qla4xxx_get_fwddb_entry(ha, ddb_entry->fw_ddb_index, fw_ddb_entry,
@@ -1370,7 +1610,7 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha,
"get_ddb_entry for fw_ddb_index %d\n",
ha->host_no, __func__,
ddb_entry->fw_ddb_index));
- return;
+ goto exit_session_conn_param;
}
cls_sess = ddb_entry->sess;
@@ -1379,6 +1619,12 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha,
cls_conn = ddb_entry->conn;
conn = cls_conn->dd_data;
+ /* Update timers after login */
+ ddb_entry->default_relogin_timeout =
+ le16_to_cpu(fw_ddb_entry->def_timeout);
+ ddb_entry->default_time2wait =
+ le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait);
+
/* Update params */
conn->max_recv_dlength = BYTE_UNITS *
le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len);
@@ -1407,6 +1653,11 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha,
memcpy(sess->initiatorname, ha->name_string,
min(sizeof(ha->name_string), sizeof(sess->initiatorname)));
+
+exit_session_conn_param:
+ if (fw_ddb_entry)
+ dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry),
+ fw_ddb_entry, fw_ddb_entry_dma);
}
/*
@@ -1607,6 +1858,9 @@ static void qla4xxx_mem_free(struct scsi_qla_host *ha)
vfree(ha->chap_list);
ha->chap_list = NULL;
+ if (ha->fw_ddb_dma_pool)
+ dma_pool_destroy(ha->fw_ddb_dma_pool);
+
/* release io space registers */
if (is_qla8022(ha)) {
if (ha->nx_pcibase)
@@ -1689,6 +1943,16 @@ static int qla4xxx_mem_alloc(struct scsi_qla_host *ha)
goto mem_alloc_error_exit;
}
+ ha->fw_ddb_dma_pool = dma_pool_create("ql4_fw_ddb", &ha->pdev->dev,
+ DDB_DMA_BLOCK_SIZE, 8, 0);
+
+ if (ha->fw_ddb_dma_pool == NULL) {
+ ql4_printk(KERN_WARNING, ha,
+ "%s: fw_ddb_dma_pool allocation failed..\n",
+ __func__);
+ goto mem_alloc_error_exit;
+ }
+
return QLA_SUCCESS;
mem_alloc_error_exit:
@@ -1800,6 +2064,60 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
}
}
+void qla4xxx_check_relogin_flash_ddb(struct iscsi_cls_session *cls_sess)
+{
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
+
+ sess = cls_sess->dd_data;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+
+ if (!(ddb_entry->ddb_type == FLASH_DDB))
+ return;
+
+ if (adapter_up(ha) && !test_bit(DF_RELOGIN, &ddb_entry->flags) &&
+ !iscsi_is_session_online(cls_sess)) {
+ if (atomic_read(&ddb_entry->retry_relogin_timer) !=
+ INVALID_ENTRY) {
+ if (atomic_read(&ddb_entry->retry_relogin_timer) ==
+ 0) {
+ atomic_set(&ddb_entry->retry_relogin_timer,
+ INVALID_ENTRY);
+ set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags);
+ set_bit(DF_RELOGIN, &ddb_entry->flags);
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: index [%d] login device\n",
+ __func__, ddb_entry->fw_ddb_index));
+ } else
+ atomic_dec(&ddb_entry->retry_relogin_timer);
+ }
+ }
+
+ /* Wait for relogin to timeout */
+ if (atomic_read(&ddb_entry->relogin_timer) &&
+ (atomic_dec_and_test(&ddb_entry->relogin_timer) != 0)) {
+ /*
+ * If the relogin times out and the device is
+ * still NOT ONLINE then try and relogin again.
+ */
+ if (!iscsi_is_session_online(cls_sess)) {
+ /* Reset retry relogin timer */
+ atomic_inc(&ddb_entry->relogin_retry_count);
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "%s: index[%d] relogin timed out-retrying"
+ " relogin (%d), retry (%d)\n", __func__,
+ ddb_entry->fw_ddb_index,
+ atomic_read(&ddb_entry->relogin_retry_count),
+ ddb_entry->default_time2wait + 4));
+ set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags);
+ atomic_set(&ddb_entry->retry_relogin_timer,
+ ddb_entry->default_time2wait + 4);
+ }
+ }
+}
+
/**
* qla4xxx_timer - checks every second for work to do.
* @ha: Pointer to host adapter structure.
@@ -1809,6 +2127,8 @@ static void qla4xxx_timer(struct scsi_qla_host *ha)
int start_dpc = 0;
uint16_t w;
+ iscsi_host_for_each_session(ha->host, qla4xxx_check_relogin_flash_ddb);
+
/* If we are in the middle of AER/EEH processing
* skip any processing and reschedule the timer
*/
@@ -2078,7 +2398,12 @@ static void qla4xxx_fail_session(struct iscsi_cls_session *cls_session)
sess = cls_session->dd_data;
ddb_entry = sess->dd_data;
ddb_entry->fw_ddb_device_state = DDB_DS_SESSION_FAILED;
- iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
+
+ if (ddb_entry->ddb_type == FLASH_DDB)
+ iscsi_block_session(ddb_entry->sess);
+ else
+ iscsi_session_failure(cls_session->dd_data,
+ ISCSI_ERR_CONN_FAILED);
}
/**
@@ -2163,7 +2488,7 @@ recover_ha_init_adapter:
/* NOTE: AF_ONLINE flag set upon successful completion of
* qla4xxx_initialize_adapter */
- status = qla4xxx_initialize_adapter(ha);
+ status = qla4xxx_initialize_adapter(ha, RESET_ADAPTER);
}
/* Retry failed adapter initialization, if necessary
@@ -2245,17 +2570,108 @@ static void qla4xxx_relogin_devices(struct iscsi_cls_session *cls_session)
iscsi_unblock_session(ddb_entry->sess);
} else {
/* Trigger relogin */
- iscsi_session_failure(cls_session->dd_data,
- ISCSI_ERR_CONN_FAILED);
+ if (ddb_entry->ddb_type == FLASH_DDB) {
+ if (!test_bit(DF_RELOGIN, &ddb_entry->flags))
+ qla4xxx_arm_relogin_timer(ddb_entry);
+ } else
+ iscsi_session_failure(cls_session->dd_data,
+ ISCSI_ERR_CONN_FAILED);
}
}
}
+int qla4xxx_unblock_flash_ddb(struct iscsi_cls_session *cls_session)
+{
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
+
+ sess = cls_session->dd_data;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]"
+ " unblock session\n", ha->host_no, __func__,
+ ddb_entry->fw_ddb_index);
+
+ iscsi_unblock_session(ddb_entry->sess);
+
+ /* Start scan target */
+ if (test_bit(AF_ONLINE, &ha->flags)) {
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]"
+ " start scan\n", ha->host_no, __func__,
+ ddb_entry->fw_ddb_index);
+ scsi_queue_work(ha->host, &ddb_entry->sess->scan_work);
+ }
+ return QLA_SUCCESS;
+}
+
+int qla4xxx_unblock_ddb(struct iscsi_cls_session *cls_session)
+{
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
+
+ sess = cls_session->dd_data;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+ ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]"
+ " unblock user space session\n", ha->host_no, __func__,
+ ddb_entry->fw_ddb_index);
+ iscsi_conn_start(ddb_entry->conn);
+ iscsi_conn_login_event(ddb_entry->conn,
+ ISCSI_CONN_STATE_LOGGED_IN);
+
+ return QLA_SUCCESS;
+}
+
static void qla4xxx_relogin_all_devices(struct scsi_qla_host *ha)
{
iscsi_host_for_each_session(ha->host, qla4xxx_relogin_devices);
}
+static void qla4xxx_relogin_flash_ddb(struct iscsi_cls_session *cls_sess)
+{
+ uint16_t relogin_timer;
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
+
+ sess = cls_sess->dd_data;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+
+ relogin_timer = max(ddb_entry->default_relogin_timeout,
+ (uint16_t)RELOGIN_TOV);
+ atomic_set(&ddb_entry->relogin_timer, relogin_timer);
+
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "scsi%ld: Relogin index [%d]. TOV=%d\n", ha->host_no,
+ ddb_entry->fw_ddb_index, relogin_timer));
+
+ qla4xxx_login_flash_ddb(cls_sess);
+}
+
+static void qla4xxx_dpc_relogin(struct iscsi_cls_session *cls_sess)
+{
+ struct iscsi_session *sess;
+ struct ddb_entry *ddb_entry;
+ struct scsi_qla_host *ha;
+
+ sess = cls_sess->dd_data;
+ ddb_entry = sess->dd_data;
+ ha = ddb_entry->ha;
+
+ if (!(ddb_entry->ddb_type == FLASH_DDB))
+ return;
+
+ if (test_and_clear_bit(DF_RELOGIN, &ddb_entry->flags) &&
+ !iscsi_is_session_online(cls_sess)) {
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "relogin issued\n"));
+ qla4xxx_relogin_flash_ddb(cls_sess);
+ }
+}
+
void qla4xxx_wake_dpc(struct scsi_qla_host *ha)
{
if (ha->dpc_thread)
@@ -2356,6 +2772,12 @@ dpc_post_reset_ha:
if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags))
qla4xxx_get_dhcp_ip_address(ha);
+ /* ---- relogin device? --- */
+ if (adapter_up(ha) &&
+ test_and_clear_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags)) {
+ iscsi_host_for_each_session(ha->host, qla4xxx_dpc_relogin);
+ }
+
/* ---- link change? --- */
if (test_and_clear_bit(DPC_LINK_CHANGED, &ha->dpc_flags)) {
if (!test_bit(AF_LINK_UP, &ha->flags)) {
@@ -2368,8 +2790,12 @@ dpc_post_reset_ha:
* fatal error recovery. Therefore, the driver must
* manually relogin to devices when recovering from
* connection failures, logouts, expired KATO, etc. */
-
- qla4xxx_relogin_all_devices(ha);
+ if (test_and_clear_bit(AF_BUILD_DDB_LIST, &ha->flags)) {
+ qla4xxx_build_ddb_list(ha, ha->is_reset);
+ iscsi_host_for_each_session(ha->host,
+ qla4xxx_login_flash_ddb);
+ } else
+ qla4xxx_relogin_all_devices(ha);
}
}
}
@@ -2867,6 +3293,9 @@ static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[])
" target ID %d\n", __func__, ddb_index[0],
ddb_index[1]));
+ ha->pri_ddb_idx = ddb_index[0];
+ ha->sec_ddb_idx = ddb_index[1];
+
exit_boot_info_free:
dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma);
exit_boot_info:
@@ -3034,6 +3463,9 @@ static int qla4xxx_get_boot_info(struct scsi_qla_host *ha)
return ret;
}
+ if (ql4xdisablesysfsboot)
+ return QLA_SUCCESS;
+
if (ddb_index[0] == 0xffff)
goto sec_target;
@@ -3066,7 +3498,15 @@ static int qla4xxx_setup_boot_info(struct scsi_qla_host *ha)
struct iscsi_boot_kobj *boot_kobj;
if (qla4xxx_get_boot_info(ha) != QLA_SUCCESS)
- return 0;
+ return QLA_ERROR;
+
+ if (ql4xdisablesysfsboot) {
+ ql4_printk(KERN_INFO, ha,
+ "%s: syfsboot disabled - driver will trigger login"
+ "and publish session for discovery .\n", __func__);
+ return QLA_SUCCESS;
+ }
+
ha->boot_kset = iscsi_boot_create_host_kset(ha->host->host_no);
if (!ha->boot_kset)
@@ -3108,7 +3548,7 @@ static int qla4xxx_setup_boot_info(struct scsi_qla_host *ha)
if (!boot_kobj)
goto put_host;
- return 0;
+ return QLA_SUCCESS;
put_host:
scsi_host_put(ha->host);
@@ -3174,9 +3614,507 @@ static void qla4xxx_create_chap_list(struct scsi_qla_host *ha)
exit_chap_list:
dma_free_coherent(&ha->pdev->dev, chap_size,
chap_flash_data, chap_dma);
- return;
}
+static void qla4xxx_get_param_ddb(struct ddb_entry *ddb_entry,
+ struct ql4_tuple_ddb *tddb)
+{
+ struct scsi_qla_host *ha;
+ struct iscsi_cls_session *cls_sess;
+ struct iscsi_cls_conn *cls_conn;
+ struct iscsi_session *sess;
+ struct iscsi_conn *conn;
+
+ DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
+ ha = ddb_entry->ha;
+ cls_sess = ddb_entry->sess;
+ sess = cls_sess->dd_data;
+ cls_conn = ddb_entry->conn;
+ conn = cls_conn->dd_data;
+
+ tddb->tpgt = sess->tpgt;
+ tddb->port = conn->persistent_port;
+ strncpy(tddb->iscsi_name, sess->targetname, ISCSI_NAME_SIZE);
+ strncpy(tddb->ip_addr, conn->persistent_address, DDB_IPADDR_LEN);
+}
+
+static void qla4xxx_convert_param_ddb(struct dev_db_entry *fw_ddb_entry,
+ struct ql4_tuple_ddb *tddb)
+{
+ uint16_t options = 0;
+
+ tddb->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp);
+ memcpy(&tddb->iscsi_name[0], &fw_ddb_entry->iscsi_name[0],
+ min(sizeof(tddb->iscsi_name), sizeof(fw_ddb_entry->iscsi_name)));
+
+ options = le16_to_cpu(fw_ddb_entry->options);
+ if (options & DDB_OPT_IPV6_DEVICE)
+ sprintf(tddb->ip_addr, "%pI6", fw_ddb_entry->ip_addr);
+ else
+ sprintf(tddb->ip_addr, "%pI4", fw_ddb_entry->ip_addr);
+
+ tddb->port = le16_to_cpu(fw_ddb_entry->port);
+}
+
+static int qla4xxx_compare_tuple_ddb(struct scsi_qla_host *ha,
+ struct ql4_tuple_ddb *old_tddb,
+ struct ql4_tuple_ddb *new_tddb)
+{
+ if (strcmp(old_tddb->iscsi_name, new_tddb->iscsi_name))
+ return QLA_ERROR;
+
+ if (strcmp(old_tddb->ip_addr, new_tddb->ip_addr))
+ return QLA_ERROR;
+
+ if (old_tddb->port != new_tddb->port)
+ return QLA_ERROR;
+
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Match Found, fw[%d,%d,%s,%s], [%d,%d,%s,%s]",
+ old_tddb->port, old_tddb->tpgt, old_tddb->ip_addr,
+ old_tddb->iscsi_name, new_tddb->port, new_tddb->tpgt,
+ new_tddb->ip_addr, new_tddb->iscsi_name));
+
+ return QLA_SUCCESS;
+}
+
+static int qla4xxx_is_session_exists(struct scsi_qla_host *ha,
+ struct dev_db_entry *fw_ddb_entry)
+{
+ struct ddb_entry *ddb_entry;
+ struct ql4_tuple_ddb *fw_tddb = NULL;
+ struct ql4_tuple_ddb *tmp_tddb = NULL;
+ int idx;
+ int ret = QLA_ERROR;
+
+ fw_tddb = vzalloc(sizeof(*fw_tddb));
+ if (!fw_tddb) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha,
+ "Memory Allocation failed.\n"));
+ ret = QLA_SUCCESS;
+ goto exit_check;
+ }
+
+ tmp_tddb = vzalloc(sizeof(*tmp_tddb));
+ if (!tmp_tddb) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha,
+ "Memory Allocation failed.\n"));
+ ret = QLA_SUCCESS;
+ goto exit_check;
+ }
+
+ qla4xxx_convert_param_ddb(fw_ddb_entry, fw_tddb);
+
+ for (idx = 0; idx < MAX_DDB_ENTRIES; idx++) {
+ ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx);
+ if (ddb_entry == NULL)
+ continue;
+
+ qla4xxx_get_param_ddb(ddb_entry, tmp_tddb);
+ if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb)) {
+ ret = QLA_SUCCESS; /* found */
+ goto exit_check;
+ }
+ }
+
+exit_check:
+ if (fw_tddb)
+ vfree(fw_tddb);
+ if (tmp_tddb)
+ vfree(tmp_tddb);
+ return ret;
+}
+
+static int qla4xxx_is_flash_ddb_exists(struct scsi_qla_host *ha,
+ struct list_head *list_nt,
+ struct dev_db_entry *fw_ddb_entry)
+{
+ struct qla_ddb_index *nt_ddb_idx, *nt_ddb_idx_tmp;
+ struct ql4_tuple_ddb *fw_tddb = NULL;
+ struct ql4_tuple_ddb *tmp_tddb = NULL;
+ int ret = QLA_ERROR;
+
+ fw_tddb = vzalloc(sizeof(*fw_tddb));
+ if (!fw_tddb) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha,
+ "Memory Allocation failed.\n"));
+ ret = QLA_SUCCESS;
+ goto exit_check;
+ }
+
+ tmp_tddb = vzalloc(sizeof(*tmp_tddb));
+ if (!tmp_tddb) {
+ DEBUG2(ql4_printk(KERN_WARNING, ha,
+ "Memory Allocation failed.\n"));
+ ret = QLA_SUCCESS;
+ goto exit_check;
+ }
+
+ qla4xxx_convert_param_ddb(fw_ddb_entry, fw_tddb);
+
+ list_for_each_entry_safe(nt_ddb_idx, nt_ddb_idx_tmp, list_nt, list) {
+ qla4xxx_convert_param_ddb(&nt_ddb_idx->fw_ddb, tmp_tddb);
+ if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb)) {
+ ret = QLA_SUCCESS; /* found */
+ goto exit_check;
+ }
+ }
+
+exit_check:
+ if (fw_tddb)
+ vfree(fw_tddb);
+ if (tmp_tddb)
+ vfree(tmp_tddb);
+ return ret;
+}
+
+static void qla4xxx_free_nt_list(struct list_head *list_nt)
+{
+ struct qla_ddb_index *nt_ddb_idx, *nt_ddb_idx_tmp;
+
+ /* Free up the normaltargets list */
+ list_for_each_entry_safe(nt_ddb_idx, nt_ddb_idx_tmp, list_nt, list) {
+ list_del_init(&nt_ddb_idx->list);
+ vfree(nt_ddb_idx);
+ }
+
+}
+
+static struct iscsi_endpoint *qla4xxx_get_ep_fwdb(struct scsi_qla_host *ha,
+ struct dev_db_entry *fw_ddb_entry)
+{
+ struct iscsi_endpoint *ep;
+ struct sockaddr_in *addr;
+ struct sockaddr_in6 *addr6;
+ struct sockaddr *dst_addr;
+ char *ip;
+
+ /* TODO: need to destroy on unload iscsi_endpoint*/
+ dst_addr = vmalloc(sizeof(*dst_addr));
+ if (!dst_addr)
+ return NULL;
+
+ if (fw_ddb_entry->options & DDB_OPT_IPV6_DEVICE) {
+ dst_addr->sa_family = AF_INET6;
+ addr6 = (struct sockaddr_in6 *)dst_addr;
+ ip = (char *)&addr6->sin6_addr;
+ memcpy(ip, fw_ddb_entry->ip_addr, IPv6_ADDR_LEN);
+ addr6->sin6_port = htons(le16_to_cpu(fw_ddb_entry->port));
+
+ } else {
+ dst_addr->sa_family = AF_INET;
+ addr = (struct sockaddr_in *)dst_addr;
+ ip = (char *)&addr->sin_addr;
+ memcpy(ip, fw_ddb_entry->ip_addr, IP_ADDR_LEN);
+ addr->sin_port = htons(le16_to_cpu(fw_ddb_entry->port));
+ }
+
+ ep = qla4xxx_ep_connect(ha->host, dst_addr, 0);
+ vfree(dst_addr);
+ return ep;
+}
+
+static int qla4xxx_verify_boot_idx(struct scsi_qla_host *ha, uint16_t idx)
+{
+ if (ql4xdisablesysfsboot)
+ return QLA_SUCCESS;
+ if (idx == ha->pri_ddb_idx || idx == ha->sec_ddb_idx)
+ return QLA_ERROR;
+ return QLA_SUCCESS;
+}
+
+static void qla4xxx_setup_flash_ddb_entry(struct scsi_qla_host *ha,
+ struct ddb_entry *ddb_entry)
+{
+ ddb_entry->ddb_type = FLASH_DDB;
+ ddb_entry->fw_ddb_index = INVALID_ENTRY;
+ ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE;
+ ddb_entry->ha = ha;
+ ddb_entry->unblock_sess = qla4xxx_unblock_flash_ddb;
+ ddb_entry->ddb_change = qla4xxx_flash_ddb_change;
+
+ atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY);
+ atomic_set(&ddb_entry->relogin_timer, 0);
+ atomic_set(&ddb_entry->relogin_retry_count, 0);
+
+ ddb_entry->default_relogin_timeout =
+ le16_to_cpu(ddb_entry->fw_ddb_entry.def_timeout);
+ ddb_entry->default_time2wait =
+ le16_to_cpu(ddb_entry->fw_ddb_entry.iscsi_def_time2wait);
+}
+
+static void qla4xxx_wait_for_ip_configuration(struct scsi_qla_host *ha)
+{
+ uint32_t idx = 0;
+ uint32_t ip_idx[IP_ADDR_COUNT] = {0, 1, 2, 3}; /* 4 IP interfaces */
+ uint32_t sts[MBOX_REG_COUNT];
+ uint32_t ip_state;
+ unsigned long wtime;
+ int ret;
+
+ wtime = jiffies + (HZ * IP_CONFIG_TOV);
+ do {
+ for (idx = 0; idx < IP_ADDR_COUNT; idx++) {
+ if (ip_idx[idx] == -1)
+ continue;
+
+ ret = qla4xxx_get_ip_state(ha, 0, ip_idx[idx], sts);
+
+ if (ret == QLA_ERROR) {
+ ip_idx[idx] = -1;
+ continue;
+ }
+
+ ip_state = (sts[1] & IP_STATE_MASK) >> IP_STATE_SHIFT;
+
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Waiting for IP state for idx = %d, state = 0x%x\n",
+ ip_idx[idx], ip_state));
+ if (ip_state == IP_ADDRSTATE_UNCONFIGURED ||
+ ip_state == IP_ADDRSTATE_INVALID ||
+ ip_state == IP_ADDRSTATE_PREFERRED ||
+ ip_state == IP_ADDRSTATE_DEPRICATED ||
+ ip_state == IP_ADDRSTATE_DISABLING)
+ ip_idx[idx] = -1;
+
+ }
+
+ /* Break if all IP states checked */
+ if ((ip_idx[0] == -1) &&
+ (ip_idx[1] == -1) &&
+ (ip_idx[2] == -1) &&
+ (ip_idx[3] == -1))
+ break;
+ schedule_timeout_uninterruptible(HZ);
+ } while (time_after(wtime, jiffies));
+}
+
+void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset)
+{
+ int max_ddbs;
+ int ret;
+ uint32_t idx = 0, next_idx = 0;
+ uint32_t state = 0, conn_err = 0;
+ uint16_t conn_id;
+ struct dev_db_entry *fw_ddb_entry;
+ struct ddb_entry *ddb_entry = NULL;
+ dma_addr_t fw_ddb_dma;
+ struct iscsi_cls_session *cls_sess;
+ struct iscsi_session *sess;
+ struct iscsi_cls_conn *cls_conn;
+ struct iscsi_endpoint *ep;
+ uint16_t cmds_max = 32, tmo = 0;
+ uint32_t initial_cmdsn = 0;
+ struct list_head list_st, list_nt; /* List of sendtargets */
+ struct qla_ddb_index *st_ddb_idx, *st_ddb_idx_tmp;
+ int fw_idx_size;
+ unsigned long wtime;
+ struct qla_ddb_index *nt_ddb_idx;
+
+ if (!test_bit(AF_LINK_UP, &ha->flags)) {
+ set_bit(AF_BUILD_DDB_LIST, &ha->flags);
+ ha->is_reset = is_reset;
+ return;
+ }
+ max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX :
+ MAX_DEV_DB_ENTRIES;
+
+ fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL,
+ &fw_ddb_dma);
+ if (fw_ddb_entry == NULL) {
+ DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n"));
+ goto exit_ddb_list;
+ }
+
+ INIT_LIST_HEAD(&list_st);
+ INIT_LIST_HEAD(&list_nt);
+ fw_idx_size = sizeof(struct qla_ddb_index);
+
+ for (idx = 0; idx < max_ddbs; idx = next_idx) {
+ ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry,
+ fw_ddb_dma, NULL,
+ &next_idx, &state, &conn_err,
+ NULL, &conn_id);
+ if (ret == QLA_ERROR)
+ break;
+
+ if (qla4xxx_verify_boot_idx(ha, idx) != QLA_SUCCESS)
+ goto continue_next_st;
+
+ /* Check if ST, add to the list_st */
+ if (strlen((char *) fw_ddb_entry->iscsi_name) != 0)
+ goto continue_next_st;
+
+ st_ddb_idx = vzalloc(fw_idx_size);
+ if (!st_ddb_idx)
+ break;
+
+ st_ddb_idx->fw_ddb_idx = idx;
+
+ list_add_tail(&st_ddb_idx->list, &list_st);
+continue_next_st:
+ if (next_idx == 0)
+ break;
+ }
+
+ /* Before issuing conn open mbox, ensure all IPs states are configured
+ * Note, conn open fails if IPs are not configured
+ */
+ qla4xxx_wait_for_ip_configuration(ha);
+
+ /* Go thru the STs and fire the sendtargets by issuing conn open mbx */
+ list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) {
+ qla4xxx_conn_open(ha, st_ddb_idx->fw_ddb_idx);
+ }
+
+ /* Wait to ensure all sendtargets are done for min 12 sec wait */
+ tmo = ((ha->def_timeout < LOGIN_TOV) ? LOGIN_TOV : ha->def_timeout);
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Default time to wait for build ddb %d\n", tmo));
+
+ wtime = jiffies + (HZ * tmo);
+ do {
+ list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st,
+ list) {
+ ret = qla4xxx_get_fwddb_entry(ha,
+ st_ddb_idx->fw_ddb_idx,
+ NULL, 0, NULL, &next_idx,
+ &state, &conn_err, NULL,
+ NULL);
+ if (ret == QLA_ERROR)
+ continue;
+
+ if (state == DDB_DS_NO_CONNECTION_ACTIVE ||
+ state == DDB_DS_SESSION_FAILED) {
+ list_del_init(&st_ddb_idx->list);
+ vfree(st_ddb_idx);
+ }
+ }
+ schedule_timeout_uninterruptible(HZ / 10);
+ } while (time_after(wtime, jiffies));
+
+ /* Free up the sendtargets list */
+ list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) {
+ list_del_init(&st_ddb_idx->list);
+ vfree(st_ddb_idx);
+ }
+
+ for (idx = 0; idx < max_ddbs; idx = next_idx) {
+ ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry,
+ fw_ddb_dma, NULL,
+ &next_idx, &state, &conn_err,
+ NULL, &conn_id);
+ if (ret == QLA_ERROR)
+ break;
+
+ if (qla4xxx_verify_boot_idx(ha, idx) != QLA_SUCCESS)
+ goto continue_next_nt;
+
+ /* Check if NT, then add to list it */
+ if (strlen((char *) fw_ddb_entry->iscsi_name) == 0)
+ goto continue_next_nt;
+
+ if (state == DDB_DS_NO_CONNECTION_ACTIVE ||
+ state == DDB_DS_SESSION_FAILED) {
+ DEBUG2(ql4_printk(KERN_INFO, ha,
+ "Adding DDB to session = 0x%x\n",
+ idx));
+ if (is_reset == INIT_ADAPTER) {
+ nt_ddb_idx = vmalloc(fw_idx_size);
+ if (!nt_ddb_idx)
+ break;
+
+ nt_ddb_idx->fw_ddb_idx = idx;
+
+ memcpy(&nt_ddb_idx->fw_ddb, fw_ddb_entry,
+ sizeof(struct dev_db_entry));
+
+ if (qla4xxx_is_flash_ddb_exists(ha, &list_nt,
+ fw_ddb_entry) == QLA_SUCCESS) {
+ vfree(nt_ddb_idx);
+ goto continue_next_nt;
+ }
+ list_add_tail(&nt_ddb_idx->list, &list_nt);
+ } else if (is_reset == RESET_ADAPTER) {
+ if (qla4xxx_is_session_exists(ha,
+ fw_ddb_entry) == QLA_SUCCESS)
+ goto continue_next_nt;
+ }
+
+ /* Create session object, with INVALID_ENTRY,
+ * the targer_id would get set when we issue the login
+ */
+ cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport,
+ ha->host, cmds_max,
+ sizeof(struct ddb_entry),
+ sizeof(struct ql4_task_data),
+ initial_cmdsn, INVALID_ENTRY);
+ if (!cls_sess)
+ goto exit_ddb_list;
+
+ /*
+ * iscsi_session_setup increments the driver reference
+ * count which wouldn't let the driver to be unloaded.
+ * so calling module_put function to decrement the
+ * reference count.
+ **/
+ module_put(qla4xxx_iscsi_transport.owner);
+ sess = cls_sess->dd_data;
+ ddb_entry = sess->dd_data;
+ ddb_entry->sess = cls_sess;
+
+ cls_sess->recovery_tmo = ql4xsess_recovery_tmo;
+ memcpy(&ddb_entry->fw_ddb_entry, fw_ddb_entry,
+ sizeof(struct dev_db_entry));
+
+ qla4xxx_setup_flash_ddb_entry(ha, ddb_entry);
+
+ cls_conn = iscsi_conn_setup(cls_sess,
+ sizeof(struct qla_conn),
+ conn_id);
+ if (!cls_conn)
+ goto exit_ddb_list;
+
+ ddb_entry->conn = cls_conn;
+
+ /* Setup ep, for displaying attributes in sysfs */
+ ep = qla4xxx_get_ep_fwdb(ha, fw_ddb_entry);
+ if (ep) {
+ ep->conn = cls_conn;
+ cls_conn->ep = ep;
+ } else {
+ DEBUG2(ql4_printk(KERN_ERR, ha,
+ "Unable to get ep\n"));
+ }
+
+ /* Update sess/conn params */
+ qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess,
+ cls_conn);
+
+ if (is_reset == RESET_ADAPTER) {
+ iscsi_block_session(cls_sess);
+ /* Use the relogin path to discover new devices
+ * by short-circuting the logic of setting
+ * timer to relogin - instead set the flags
+ * to initiate login right away.
+ */
+ set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags);
+ set_bit(DF_RELOGIN, &ddb_entry->flags);
+ }
+ }
+continue_next_nt:
+ if (next_idx == 0)
+ break;
+ }
+exit_ddb_list:
+ qla4xxx_free_nt_list(&list_nt);
+ if (fw_ddb_entry)
+ dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma);
+
+ qla4xxx_free_ddb_index(ha);
+}
+
+
/**
* qla4xxx_probe_adapter - callback function to probe HBA
* @pdev: pointer to pci_dev structure
@@ -3298,7 +4236,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
* firmware
* NOTE: interrupts enabled upon successful completion
*/
- status = qla4xxx_initialize_adapter(ha);
+ status = qla4xxx_initialize_adapter(ha, INIT_ADAPTER);
while ((!test_bit(AF_ONLINE, &ha->flags)) &&
init_retry_count++ < MAX_INIT_RETRIES) {
@@ -3319,7 +4257,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
if (ha->isp_ops->reset_chip(ha) == QLA_ERROR)
continue;
- status = qla4xxx_initialize_adapter(ha);
+ status = qla4xxx_initialize_adapter(ha, INIT_ADAPTER);
}
if (!test_bit(AF_ONLINE, &ha->flags)) {
@@ -3386,12 +4324,16 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
ha->host_no, ha->firmware_version[0], ha->firmware_version[1],
ha->patch_number, ha->build_number);
- qla4xxx_create_chap_list(ha);
-
if (qla4xxx_setup_boot_info(ha))
ql4_printk(KERN_ERR, ha, "%s:ISCSI boot info setup failed\n",
__func__);
+ /* Perform the build ddb list and login to each */
+ qla4xxx_build_ddb_list(ha, INIT_ADAPTER);
+ iscsi_host_for_each_session(ha->host, qla4xxx_login_flash_ddb);
+
+ qla4xxx_create_chap_list(ha);
+
qla4xxx_create_ifaces(ha);
return 0;
@@ -3449,6 +4391,38 @@ static void qla4xxx_prevent_other_port_reinit(struct scsi_qla_host *ha)
}
}
+static void qla4xxx_destroy_fw_ddb_session(struct scsi_qla_host *ha)
+{
+ struct ddb_entry *ddb_entry;
+ int options;
+ int idx;
+
+ for (idx = 0; idx < MAX_DDB_ENTRIES; idx++) {
+
+ ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx);
+ if ((ddb_entry != NULL) &&
+ (ddb_entry->ddb_type == FLASH_DDB)) {
+
+ options = LOGOUT_OPTION_CLOSE_SESSION;
+ if (qla4xxx_session_logout_ddb(ha, ddb_entry, options)
+ == QLA_ERROR)
+ ql4_printk(KERN_ERR, ha, "%s: Logout failed\n",
+ __func__);
+
+ qla4xxx_clear_ddb_entry(ha, ddb_entry->fw_ddb_index);
+ /*
+ * we have decremented the reference count of the driver
+ * when we setup the session to have the driver unload
+ * to be seamless without actually destroying the
+ * session
+ **/
+ try_module_get(qla4xxx_iscsi_transport.owner);
+ iscsi_destroy_endpoint(ddb_entry->conn->ep);
+ qla4xxx_free_ddb(ha, ddb_entry);
+ iscsi_session_teardown(ddb_entry->sess);
+ }
+ }
+}
/**
* qla4xxx_remove_adapter - calback function to remove adapter.
* @pci_dev: PCI device pointer
@@ -3465,9 +4439,11 @@ static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev)
/* destroy iface from sysfs */
qla4xxx_destroy_ifaces(ha);
- if (ha->boot_kset)
+ if ((!ql4xdisablesysfsboot) && ha->boot_kset)
iscsi_boot_destroy_kset(ha->boot_kset);
+ qla4xxx_destroy_fw_ddb_session(ha);
+
scsi_remove_host(ha->host);
qla4xxx_free_adapter(ha);
@@ -4115,7 +5091,7 @@ static uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
qla4_8xxx_idc_unlock(ha);
clear_bit(AF_FW_RECOVERY, &ha->flags);
- rval = qla4xxx_initialize_adapter(ha);
+ rval = qla4xxx_initialize_adapter(ha, RESET_ADAPTER);
qla4_8xxx_idc_lock(ha);
if (rval != QLA_SUCCESS) {
@@ -4151,7 +5127,7 @@ static uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
if ((qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE) ==
QLA82XX_DEV_READY)) {
clear_bit(AF_FW_RECOVERY, &ha->flags);
- rval = qla4xxx_initialize_adapter(ha);
+ rval = qla4xxx_initialize_adapter(ha, RESET_ADAPTER);
if (rval == QLA_SUCCESS) {
ret = qla4xxx_request_irqs(ha);
if (ret) {
diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h
index c15347d3f53..5254e57968f 100644
--- a/drivers/scsi/qla4xxx/ql4_version.h
+++ b/drivers/scsi/qla4xxx/ql4_version.h
@@ -5,4 +5,4 @@
* See LICENSE.qla4xxx for copyright and licensing details.
*/
-#define QLA4XXX_DRIVER_VERSION "5.02.00-k8"
+#define QLA4XXX_DRIVER_VERSION "5.02.00-k9"
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 019a7163572..dcf7e100642 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -971,6 +971,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
struct s3c64xx_spi_info *sci;
struct spi_master *master;
int ret;
+ char clk_name[16];
if (pdev->id < 0) {
dev_err(&pdev->dev,
@@ -984,11 +985,6 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
}
sci = pdev->dev.platform_data;
- if (!sci->src_clk_name) {
- dev_err(&pdev->dev,
- "Board init must call s3c64xx_spi_set_info()\n");
- return -EINVAL;
- }
/* Check for availability of necessary resource */
@@ -1073,17 +1069,17 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
goto err4;
}
- sdd->src_clk = clk_get(&pdev->dev, sci->src_clk_name);
+ sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
+ sdd->src_clk = clk_get(&pdev->dev, clk_name);
if (IS_ERR(sdd->src_clk)) {
dev_err(&pdev->dev,
- "Unable to acquire clock '%s'\n", sci->src_clk_name);
+ "Unable to acquire clock '%s'\n", clk_name);
ret = PTR_ERR(sdd->src_clk);
goto err5;
}
if (clk_enable(sdd->src_clk)) {
- dev_err(&pdev->dev, "Couldn't enable clock '%s'\n",
- sci->src_clk_name);
+ dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name);
ret = -EBUSY;
goto err6;
}
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 925a1e547a8..fb89b85d0d8 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -457,7 +457,7 @@ config SERIAL_SAMSUNG
config SERIAL_SAMSUNG_UARTS_4
bool
depends on ARM && PLAT_SAMSUNG
- default y if CPU_S3C2443
+ default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs
@@ -465,7 +465,7 @@ config SERIAL_SAMSUNG_UARTS
int
depends on ARM && PLAT_SAMSUNG
default 6 if ARCH_S5P6450
- default 4 if SERIAL_SAMSUNG_UARTS_4
+ default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
help
Select the number of available UART ports for the Samsung S3C
@@ -495,47 +495,6 @@ config SERIAL_SAMSUNG_CONSOLE
your boot loader about how to pass options to the kernel at
boot time.)
-config SERIAL_S3C2410
- tristate "Samsung S3C2410 Serial port support"
- depends on SERIAL_SAMSUNG && CPU_S3C2410
- default y if CPU_S3C2410
- help
- Serial port support for the Samsung S3C2410 SoC
-
-config SERIAL_S3C2412
- tristate "Samsung S3C2412/S3C2413 Serial port support"
- depends on SERIAL_SAMSUNG && CPU_S3C2412
- default y if CPU_S3C2412
- help
- Serial port support for the Samsung S3C2412 and S3C2413 SoC
-
-config SERIAL_S3C2440
- tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416)
- default y if CPU_S3C2440
- default y if CPU_S3C2442
- select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416
- help
- Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
-
-config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100)
- select SERIAL_SAMSUNG_UARTS_4
- default y
- help
- Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450
- and S5PC100 SoCs
-
-config SERIAL_S5PV210
- tristate "Samsung S5PV210 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212)
- select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212)
- default y
- help
- Serial port support for Samsung's S5P Family of SoC's
-
-
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index e10cf5b54b6..84bc2e5a57b 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -39,11 +39,6 @@ obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
-obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
-obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
-obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
-obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
-obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
diff --git a/drivers/tty/serial/s3c2410.c b/drivers/tty/serial/s3c2410.c
deleted file mode 100644
index b1d7e7c1849..00000000000
--- a/drivers/tty/serial/s3c2410.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Driver for Samsung S3C2410 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c2410_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- if (strcmp(clk->name, "uclk") == 0)
- ucon |= S3C2410_UCON_UCLK;
- else
- ucon &= ~S3C2410_UCON_UCLK;
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-static int s3c2410_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- clk->divisor = 1;
- clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
-
- return 0;
-}
-
-static int s3c2410_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n",
- port, port->mapbase, cfg);
-
- wr_regl(port, S3C2410_UCON, cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2410_uart_inf = {
- .name = "Samsung S3C2410 UART",
- .type = PORT_S3C2410,
- .fifosize = 16,
- .rx_fifomask = S3C2410_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2410_UFSTAT_RXFULL,
- .tx_fifofull = S3C2410_UFSTAT_TXFULL,
- .tx_fifomask = S3C2410_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2410_serial_getsource,
- .set_clksrc = s3c2410_serial_setsource,
- .reset_port = s3c2410_serial_resetport,
-};
-
-static int s3c2410_serial_probe(struct platform_device *dev)
-{
- return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
-}
-
-static struct platform_driver s3c2410_serial_driver = {
- .probe = s3c2410_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c2410-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s3c2410_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
-}
-
-static void __exit s3c2410_serial_exit(void)
-{
- platform_driver_unregister(&s3c2410_serial_driver);
-}
-
-module_init(s3c2410_serial_init);
-module_exit(s3c2410_serial_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver");
-MODULE_ALIAS("platform:s3c2410-uart");
diff --git a/drivers/tty/serial/s3c2412.c b/drivers/tty/serial/s3c2412.c
deleted file mode 100644
index 2234bf9ced4..00000000000
--- a/drivers/tty/serial/s3c2412.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c2412_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- ucon &= ~S3C2412_UCON_CLKMASK;
-
- if (strcmp(clk->name, "uclk") == 0)
- ucon |= S3C2440_UCON_UCLK;
- else if (strcmp(clk->name, "pclk") == 0)
- ucon |= S3C2440_UCON_PCLK;
- else if (strcmp(clk->name, "usysclk") == 0)
- ucon |= S3C2412_UCON_USYSCLK;
- else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s3c2412_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- switch (ucon & S3C2412_UCON_CLKMASK) {
- case S3C2412_UCON_UCLK:
- clk->divisor = 1;
- clk->name = "uclk";
- break;
-
- case S3C2412_UCON_PCLK:
- case S3C2412_UCON_PCLK2:
- clk->divisor = 1;
- clk->name = "pclk";
- break;
-
- case S3C2412_UCON_USYSCLK:
- clk->divisor = 1;
- clk->name = "usysclk";
- break;
- }
-
- return 0;
-}
-
-static int s3c2412_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- dbg("%s: port=%p (%08lx), cfg=%p\n",
- __func__, port, port->mapbase, cfg);
-
- /* ensure we don't change the clock settings... */
-
- ucon &= S3C2412_UCON_CLKMASK;
-
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2412_uart_inf = {
- .name = "Samsung S3C2412 UART",
- .type = PORT_S3C2412,
- .fifosize = 64,
- .has_divslot = 1,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2412_serial_getsource,
- .set_clksrc = s3c2412_serial_setsource,
- .reset_port = s3c2412_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2412_serial_probe(struct platform_device *dev)
-{
- dbg("s3c2440_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
-}
-
-static struct platform_driver s3c2412_serial_driver = {
- .probe = s3c2412_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c2412-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static inline int s3c2412_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
-}
-
-static inline void s3c2412_serial_exit(void)
-{
- platform_driver_unregister(&s3c2412_serial_driver);
-}
-
-module_init(s3c2412_serial_init);
-module_exit(s3c2412_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c2412-uart");
diff --git a/drivers/tty/serial/s3c2440.c b/drivers/tty/serial/s3c2440.c
deleted file mode 100644
index 1d0c324b813..00000000000
--- a/drivers/tty/serial/s3c2440.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-
-static int s3c2440_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- /* todo - proper fclk<>nonfclk switch. */
-
- ucon &= ~S3C2440_UCON_CLKMASK;
-
- if (strcmp(clk->name, "uclk") == 0)
- ucon |= S3C2440_UCON_UCLK;
- else if (strcmp(clk->name, "pclk") == 0)
- ucon |= S3C2440_UCON_PCLK;
- else if (strcmp(clk->name, "fclk") == 0)
- ucon |= S3C2440_UCON_FCLK;
- else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s3c2440_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
- unsigned long ucon0, ucon1, ucon2;
-
- switch (ucon & S3C2440_UCON_CLKMASK) {
- case S3C2440_UCON_UCLK:
- clk->divisor = 1;
- clk->name = "uclk";
- break;
-
- case S3C2440_UCON_PCLK:
- case S3C2440_UCON_PCLK2:
- clk->divisor = 1;
- clk->name = "pclk";
- break;
-
- case S3C2440_UCON_FCLK:
- /* the fun of calculating the uart divisors on
- * the s3c2440 */
-
- ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
- ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
- ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
- printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
-
- ucon0 &= S3C2440_UCON0_DIVMASK;
- ucon1 &= S3C2440_UCON1_DIVMASK;
- ucon2 &= S3C2440_UCON2_DIVMASK;
-
- if (ucon0 != 0) {
- clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 6;
- } else if (ucon1 != 0) {
- clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 21;
- } else if (ucon2 != 0) {
- clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 36;
- } else {
- /* manual calims 44, seems to be 9 */
- clk->divisor = 9;
- }
-
- clk->name = "fclk";
- break;
- }
-
- return 0;
-}
-
-static int s3c2440_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
- port, port->mapbase, cfg);
-
- /* ensure we don't change the clock settings... */
-
- ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
-
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2440_uart_inf = {
- .name = "Samsung S3C2440 UART",
- .type = PORT_S3C2440,
- .fifosize = 64,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2440_serial_getsource,
- .set_clksrc = s3c2440_serial_setsource,
- .reset_port = s3c2440_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2440_serial_probe(struct platform_device *dev)
-{
- dbg("s3c2440_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
-}
-
-static struct platform_driver s3c2440_serial_driver = {
- .probe = s3c2440_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c2440-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s3c2440_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
-}
-
-static void __exit s3c2440_serial_exit(void)
-{
- platform_driver_unregister(&s3c2440_serial_driver);
-}
-
-module_init(s3c2440_serial_init);
-module_exit(s3c2440_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/tty/serial/s3c6400.c b/drivers/tty/serial/s3c6400.c
deleted file mode 100644
index e2f6913d84d..00000000000
--- a/drivers/tty/serial/s3c6400.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs.
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-
-#include "samsung.h"
-
-static int s3c6400_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- if (strcmp(clk->name, "uclk0") == 0) {
- ucon &= ~S3C6400_UCON_CLKMASK;
- ucon |= S3C6400_UCON_UCLK0;
- } else if (strcmp(clk->name, "uclk1") == 0)
- ucon |= S3C6400_UCON_UCLK1;
- else if (strcmp(clk->name, "pclk") == 0) {
- /* See notes about transitioning from UCLK to PCLK */
- ucon &= ~S3C6400_UCON_UCLK0;
- } else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s3c6400_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- u32 ucon = rd_regl(port, S3C2410_UCON);
-
- clk->divisor = 1;
-
- switch (ucon & S3C6400_UCON_CLKMASK) {
- case S3C6400_UCON_UCLK0:
- clk->name = "uclk0";
- break;
-
- case S3C6400_UCON_UCLK1:
- clk->name = "uclk1";
- break;
-
- case S3C6400_UCON_PCLK:
- case S3C6400_UCON_PCLK2:
- clk->name = "pclk";
- break;
- }
-
- return 0;
-}
-
-static int s3c6400_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n",
- port, port->mapbase, cfg);
-
- /* ensure we don't change the clock settings... */
-
- ucon &= S3C6400_UCON_CLKMASK;
-
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c6400_uart_inf = {
- .name = "Samsung S3C6400 UART",
- .type = PORT_S3C6400,
- .fifosize = 64,
- .has_divslot = 1,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .get_clksrc = s3c6400_serial_getsource,
- .set_clksrc = s3c6400_serial_setsource,
- .reset_port = s3c6400_serial_resetport,
-};
-
-/* device management */
-
-static int s3c6400_serial_probe(struct platform_device *dev)
-{
- dbg("s3c6400_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
-}
-
-static struct platform_driver s3c6400_serial_driver = {
- .probe = s3c6400_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c6400-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s3c6400_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
-}
-
-static void __exit s3c6400_serial_exit(void)
-{
- platform_driver_unregister(&s3c6400_serial_driver);
-}
-
-module_init(s3c6400_serial_init);
-module_exit(s3c6400_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c6400-uart");
diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c
deleted file mode 100644
index 8b0b888a1b7..00000000000
--- a/drivers/tty/serial/s5pv210.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on drivers/serial/s3c6400.c
- *
- * Driver for Samsung S5PV210 SoC UARTs.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/delay.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <plat/regs-serial.h>
-#include "samsung.h"
-
-static int s5pv210_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- struct s3c2410_uartcfg *cfg = port->dev->platform_data;
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- if (cfg->flags & NO_NEED_CHECK_CLKSRC)
- return 0;
-
- if (strcmp(clk->name, "pclk") == 0)
- ucon &= ~S5PV210_UCON_CLKMASK;
- else if (strcmp(clk->name, "uclk1") == 0)
- ucon |= S5PV210_UCON_CLKMASK;
- else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s5pv210_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- struct s3c2410_uartcfg *cfg = port->dev->platform_data;
- u32 ucon = rd_regl(port, S3C2410_UCON);
-
- clk->divisor = 1;
-
- if (cfg->flags & NO_NEED_CHECK_CLKSRC)
- return 0;
-
- switch (ucon & S5PV210_UCON_CLKMASK) {
- case S5PV210_UCON_PCLK:
- clk->name = "pclk";
- break;
- case S5PV210_UCON_UCLK:
- clk->name = "uclk1";
- break;
- }
-
- return 0;
-}
-
-static int s5pv210_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- ucon &= S5PV210_UCON_CLKMASK;
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- /* It is need to delay When reset FIFO register */
- udelay(1);
-
- return 0;
-}
-
-#define S5PV210_UART_DEFAULT_INFO(fifo_size) \
- .name = "Samsung S5PV210 UART0", \
- .type = PORT_S3C6400, \
- .fifosize = fifo_size, \
- .has_divslot = 1, \
- .rx_fifomask = S5PV210_UFSTAT_RXMASK, \
- .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
- .rx_fifofull = S5PV210_UFSTAT_RXFULL, \
- .tx_fifofull = S5PV210_UFSTAT_TXFULL, \
- .tx_fifomask = S5PV210_UFSTAT_TXMASK, \
- .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \
- .get_clksrc = s5pv210_serial_getsource, \
- .set_clksrc = s5pv210_serial_setsource, \
- .reset_port = s5pv210_serial_resetport
-
-static struct s3c24xx_uart_info s5p_port_fifo256 = {
- S5PV210_UART_DEFAULT_INFO(256),
-};
-
-static struct s3c24xx_uart_info s5p_port_fifo64 = {
- S5PV210_UART_DEFAULT_INFO(64),
-};
-
-static struct s3c24xx_uart_info s5p_port_fifo16 = {
- S5PV210_UART_DEFAULT_INFO(16),
-};
-
-static struct s3c24xx_uart_info *s5p_uart_inf[] = {
- [0] = &s5p_port_fifo256,
- [1] = &s5p_port_fifo64,
- [2] = &s5p_port_fifo16,
- [3] = &s5p_port_fifo16,
-};
-
-/* device management */
-static int s5p_serial_probe(struct platform_device *pdev)
-{
- return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
-}
-
-static struct platform_driver s5p_serial_driver = {
- .probe = s5p_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s5pv210-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s5p_serial_init(void)
-{
- return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf);
-}
-
-static void __exit s5p_serial_exit(void)
-{
- platform_driver_unregister(&s5p_serial_driver);
-}
-
-module_init(s5p_serial_init);
-module_exit(s5p_serial_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s5pv210-uart");
-MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support");
-MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index b31f1c3a2c4..f96f37b5fec 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -42,6 +42,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
+#include <linux/of.h>
#include <asm/irq.h>
@@ -49,6 +50,7 @@
#include <mach/map.h>
#include <plat/regs-serial.h>
+#include <plat/clock.h>
#include "samsung.h"
@@ -190,10 +192,13 @@ static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *p
static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
{
+ struct s3c24xx_uart_port *ourport;
+
if (port->dev == NULL)
return NULL;
- return (struct s3c2410_uartcfg *)port->dev->platform_data;
+ ourport = container_of(port, struct s3c24xx_uart_port, port);
+ return ourport->cfg;
}
static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
@@ -202,7 +207,7 @@ static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
struct s3c24xx_uart_info *info = ourport->info;
if (ufstat & info->rx_fifofull)
- return info->fifosize;
+ return ourport->port.fifosize;
return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
}
@@ -555,154 +560,98 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
*
*/
+#define MAX_CLK_NAME_LENGTH 15
-#define MAX_CLKS (8)
-
-static struct s3c24xx_uart_clksrc tmp_clksrc = {
- .name = "pclk",
- .min_baud = 0,
- .max_baud = 0,
- .divisor = 1,
-};
-
-static inline int
-s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
+static inline int s3c24xx_serial_getsource(struct uart_port *port)
{
struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned int ucon;
- return (info->get_clksrc)(port, c);
-}
-
-static inline int
-s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
-{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ if (info->num_clks == 1)
+ return 0;
- return (info->set_clksrc)(port, c);
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= info->clksel_mask;
+ return ucon >> info->clksel_shift;
}
-struct baud_calc {
- struct s3c24xx_uart_clksrc *clksrc;
- unsigned int calc;
- unsigned int divslot;
- unsigned int quot;
- struct clk *src;
-};
-
-static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
- struct uart_port *port,
- struct s3c24xx_uart_clksrc *clksrc,
- unsigned int baud)
+static void s3c24xx_serial_setsource(struct uart_port *port,
+ unsigned int clk_sel)
{
- struct s3c24xx_uart_port *ourport = to_ourport(port);
- unsigned long rate;
-
- calc->src = clk_get(port->dev, clksrc->name);
- if (calc->src == NULL || IS_ERR(calc->src))
- return 0;
-
- rate = clk_get_rate(calc->src);
- rate /= clksrc->divisor;
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned int ucon;
- calc->clksrc = clksrc;
+ if (info->num_clks == 1)
+ return;
- if (ourport->info->has_divslot) {
- unsigned long div = rate / baud;
-
- /* The UDIVSLOT register on the newer UARTs allows us to
- * get a divisor adjustment of 1/16th on the baud clock.
- *
- * We don't keep the UDIVSLOT value (the 16ths we calculated
- * by not multiplying the baud by 16) as it is easy enough
- * to recalculate.
- */
-
- calc->quot = div / 16;
- calc->calc = rate / div;
- } else {
- calc->quot = (rate + (8 * baud)) / (16 * baud);
- calc->calc = (rate / (calc->quot * 16));
- }
+ ucon = rd_regl(port, S3C2410_UCON);
+ if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel)
+ return;
- calc->quot--;
- return 1;
+ ucon &= ~info->clksel_mask;
+ ucon |= clk_sel << info->clksel_shift;
+ wr_regl(port, S3C2410_UCON, ucon);
}
-static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
- struct s3c24xx_uart_clksrc **clksrc,
- struct clk **clk,
- unsigned int baud)
+static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
+ unsigned int req_baud, struct clk **best_clk,
+ unsigned int *clk_num)
{
- struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
- struct s3c24xx_uart_clksrc *clkp;
- struct baud_calc res[MAX_CLKS];
- struct baud_calc *resptr, *best, *sptr;
- int i;
-
- clkp = cfg->clocks;
- best = NULL;
-
- if (cfg->clocks_size < 2) {
- if (cfg->clocks_size == 0)
- clkp = &tmp_clksrc;
-
- /* check to see if we're sourcing fclk, and if so we're
- * going to have to update the clock source
- */
-
- if (strcmp(clkp->name, "fclk") == 0) {
- struct s3c24xx_uart_clksrc src;
-
- s3c24xx_serial_getsource(port, &src);
-
- /* check that the port already using fclk, and if
- * not, then re-select fclk
+ struct s3c24xx_uart_info *info = ourport->info;
+ struct clk *clk;
+ unsigned long rate;
+ unsigned int cnt, baud, quot, clk_sel, best_quot = 0;
+ char clkname[MAX_CLK_NAME_LENGTH];
+ int calc_deviation, deviation = (1 << 30) - 1;
+
+ *best_clk = NULL;
+ clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
+ ourport->info->def_clk_sel;
+ for (cnt = 0; cnt < info->num_clks; cnt++) {
+ if (!(clk_sel & (1 << cnt)))
+ continue;
+
+ sprintf(clkname, "clk_uart_baud%d", cnt);
+ clk = clk_get(ourport->port.dev, clkname);
+ if (IS_ERR_OR_NULL(clk))
+ continue;
+
+ rate = clk_get_rate(clk);
+ if (!rate)
+ continue;
+
+ if (ourport->info->has_divslot) {
+ unsigned long div = rate / req_baud;
+
+ /* The UDIVSLOT register on the newer UARTs allows us to
+ * get a divisor adjustment of 1/16th on the baud clock.
+ *
+ * We don't keep the UDIVSLOT value (the 16ths we
+ * calculated by not multiplying the baud by 16) as it
+ * is easy enough to recalculate.
*/
- if (strcmp(src.name, clkp->name) == 0) {
- s3c24xx_serial_setsource(port, clkp);
- s3c24xx_serial_getsource(port, &src);
- }
-
- clkp->divisor = src.divisor;
- }
-
- s3c24xx_serial_calcbaud(res, port, clkp, baud);
- best = res;
- resptr = best + 1;
- } else {
- resptr = res;
-
- for (i = 0; i < cfg->clocks_size; i++, clkp++) {
- if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
- resptr++;
+ quot = div / 16;
+ baud = rate / div;
+ } else {
+ quot = (rate + (8 * req_baud)) / (16 * req_baud);
+ baud = rate / (quot * 16);
}
- }
-
- /* ok, we now need to select the best clock we found */
-
- if (!best) {
- unsigned int deviation = (1<<30)|((1<<30)-1);
- int calc_deviation;
+ quot--;
- for (sptr = res; sptr < resptr; sptr++) {
- calc_deviation = baud - sptr->calc;
- if (calc_deviation < 0)
- calc_deviation = -calc_deviation;
+ calc_deviation = req_baud - baud;
+ if (calc_deviation < 0)
+ calc_deviation = -calc_deviation;
- if (calc_deviation < deviation) {
- best = sptr;
- deviation = calc_deviation;
- }
+ if (calc_deviation < deviation) {
+ *best_clk = clk;
+ best_quot = quot;
+ *clk_num = cnt;
+ deviation = calc_deviation;
}
}
- /* store results to pass back */
-
- *clksrc = best->clksrc;
- *clk = best->src;
-
- return best->quot;
+ return best_quot;
}
/* udivslot_table[]
@@ -735,10 +684,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
{
struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- struct s3c24xx_uart_clksrc *clksrc = NULL;
struct clk *clk = NULL;
unsigned long flags;
- unsigned int baud, quot;
+ unsigned int baud, quot, clk_sel = 0;
unsigned int ulcon;
unsigned int umcon;
unsigned int udivslot = 0;
@@ -754,17 +702,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
*/
baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
-
+ quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
quot = port->custom_divisor;
- else
- quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
+ if (!clk)
+ return;
/* check to see if we need to change clock source */
- if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
- dbg("selecting clock %p\n", clk);
- s3c24xx_serial_setsource(port, clksrc);
+ if (ourport->baudclk != clk) {
+ s3c24xx_serial_setsource(port, clk_sel);
if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
clk_disable(ourport->baudclk);
@@ -773,7 +720,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
clk_enable(clk);
- ourport->clksrc = clksrc;
ourport->baudclk = clk;
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
@@ -1020,16 +966,29 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS
/* s3c24xx_serial_resetport
*
- * wrapper to call the specific reset for this port (reset the fifos
- * and the settings)
+ * reset the fifos and other the settings.
*/
-static inline int s3c24xx_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
+static void s3c24xx_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
{
struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+ unsigned int ucon_mask;
+
+ ucon_mask = info->clksel_mask;
+ if (info->type == PORT_S3C2440)
+ ucon_mask |= S3C2440_UCON0_DIVMASK;
- return (info->reset_port)(port, cfg);
+ ucon &= ucon_mask;
+ wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+
+ /* reset both fifos */
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ /* some delay is required after fifo reset */
+ udelay(1);
}
@@ -1121,11 +1080,10 @@ static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *p
*/
static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
- struct s3c24xx_uart_info *info,
struct platform_device *platdev)
{
struct uart_port *port = &ourport->port;
- struct s3c2410_uartcfg *cfg;
+ struct s3c2410_uartcfg *cfg = ourport->cfg;
struct resource *res;
int ret;
@@ -1134,30 +1092,16 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
if (platdev == NULL)
return -ENODEV;
- cfg = s3c24xx_dev_to_cfg(&platdev->dev);
-
if (port->mapbase != 0)
return 0;
- if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
- printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
- cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
- return -ERANGE;
- }
-
/* setup info for port */
port->dev = &platdev->dev;
- ourport->info = info;
/* Startup sequence is different for s3c64xx and higher SoC's */
if (s3c24xx_serial_has_interrupt_mask(port))
s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
- /* copy the info in from provided structure */
- ourport->port.fifosize = info->fifosize;
-
- dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
-
port->uartclk = 1;
if (cfg->uart_flags & UPF_CONS_FLOW) {
@@ -1215,43 +1159,74 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev,
struct uart_port *port = s3c24xx_dev_to_port(dev);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name);
+ return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
}
static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
+
/* Device driver serial port probe */
+static const struct of_device_id s3c24xx_uart_dt_match[];
static int probe_index;
-int s3c24xx_serial_probe(struct platform_device *dev,
- struct s3c24xx_uart_info *info)
+static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data(
+ struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node);
+ return (struct s3c24xx_serial_drv_data *)match->data;
+ }
+#endif
+ return (struct s3c24xx_serial_drv_data *)
+ platform_get_device_id(pdev)->driver_data;
+}
+
+static int s3c24xx_serial_probe(struct platform_device *pdev)
{
struct s3c24xx_uart_port *ourport;
int ret;
- dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
+ dbg("s3c24xx_serial_probe(%p) %d\n", pdev, probe_index);
ourport = &s3c24xx_serial_ports[probe_index];
+
+ ourport->drv_data = s3c24xx_get_driver_data(pdev);
+ if (!ourport->drv_data) {
+ dev_err(&pdev->dev, "could not find driver data\n");
+ return -ENODEV;
+ }
+
+ ourport->info = ourport->drv_data->info;
+ ourport->cfg = (pdev->dev.platform_data) ?
+ (struct s3c2410_uartcfg *)pdev->dev.platform_data :
+ ourport->drv_data->def_cfg;
+
+ ourport->port.fifosize = (ourport->info->fifosize) ?
+ ourport->info->fifosize :
+ ourport->drv_data->fifosize[probe_index];
+
probe_index++;
dbg("%s: initialising port %p...\n", __func__, ourport);
- ret = s3c24xx_serial_init_port(ourport, info, dev);
+ ret = s3c24xx_serial_init_port(ourport, pdev);
if (ret < 0)
goto probe_err;
dbg("%s: adding port\n", __func__);
uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
- platform_set_drvdata(dev, &ourport->port);
+ platform_set_drvdata(pdev, &ourport->port);
- ret = device_create_file(&dev->dev, &dev_attr_clock_source);
+ ret = device_create_file(&pdev->dev, &dev_attr_clock_source);
if (ret < 0)
- printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
+ dev_err(&pdev->dev, "failed to add clock source attr.\n");
ret = s3c24xx_serial_cpufreq_register(ourport);
if (ret < 0)
- dev_err(&dev->dev, "failed to add cpufreq notifier\n");
+ dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
return 0;
@@ -1259,9 +1234,7 @@ int s3c24xx_serial_probe(struct platform_device *dev,
return ret;
}
-EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
-
-int __devexit s3c24xx_serial_remove(struct platform_device *dev)
+static int __devexit s3c24xx_serial_remove(struct platform_device *dev)
{
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
@@ -1274,8 +1247,6 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev)
return 0;
}
-EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
-
/* UART power management code */
#ifdef CONFIG_PM_SLEEP
static int s3c24xx_serial_suspend(struct device *dev)
@@ -1315,41 +1286,6 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
#define SERIAL_SAMSUNG_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP */
-int s3c24xx_serial_init(struct platform_driver *drv,
- struct s3c24xx_uart_info *info)
-{
- dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
-
- drv->driver.pm = SERIAL_SAMSUNG_PM_OPS;
-
- return platform_driver_register(drv);
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_serial_init);
-
-/* module initialisation code */
-
-static int __init s3c24xx_serial_modinit(void)
-{
- int ret;
-
- ret = uart_register_driver(&s3c24xx_uart_drv);
- if (ret < 0) {
- printk(KERN_ERR "failed to register UART driver\n");
- return -1;
- }
-
- return 0;
-}
-
-static void __exit s3c24xx_serial_modexit(void)
-{
- uart_unregister_driver(&s3c24xx_uart_drv);
-}
-
-module_init(s3c24xx_serial_modinit);
-module_exit(s3c24xx_serial_modexit);
-
/* Console code */
#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
@@ -1395,12 +1331,13 @@ static void __init
s3c24xx_serial_get_options(struct uart_port *port, int *baud,
int *parity, int *bits)
{
- struct s3c24xx_uart_clksrc clksrc;
struct clk *clk;
unsigned int ulcon;
unsigned int ucon;
unsigned int ubrdiv;
unsigned long rate;
+ unsigned int clk_sel;
+ char clk_name[MAX_CLK_NAME_LENGTH];
ulcon = rd_regl(port, S3C2410_ULCON);
ucon = rd_regl(port, S3C2410_UCON);
@@ -1445,44 +1382,21 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
/* now calculate the baud rate */
- s3c24xx_serial_getsource(port, &clksrc);
+ clk_sel = s3c24xx_serial_getsource(port);
+ sprintf(clk_name, "clk_uart_baud%d", clk_sel);
- clk = clk_get(port->dev, clksrc.name);
+ clk = clk_get(port->dev, clk_name);
if (!IS_ERR(clk) && clk != NULL)
- rate = clk_get_rate(clk) / clksrc.divisor;
+ rate = clk_get_rate(clk);
else
rate = 1;
-
*baud = rate / (16 * (ubrdiv + 1));
dbg("calculated baud %d\n", *baud);
}
}
-/* s3c24xx_serial_init_ports
- *
- * initialise the serial ports from the machine provided initialisation
- * data.
-*/
-
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info)
-{
- struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
- struct platform_device **platdev_ptr;
- int i;
-
- dbg("s3c24xx_serial_init_ports: initialising ports...\n");
-
- platdev_ptr = s3c24xx_uart_devs;
-
- for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
- s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
- }
-
- return 0;
-}
-
static int __init
s3c24xx_serial_console_setup(struct console *co, char *options)
{
@@ -1526,11 +1440,6 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
return uart_set_options(port, co, baud, parity, bits, flow);
}
-/* s3c24xx_serial_initconsole
- *
- * initialise the console from one of the uart drivers
-*/
-
static struct console s3c24xx_serial_console = {
.name = S3C24XX_SERIAL_NAME,
.device = uart_console_device,
@@ -1540,34 +1449,250 @@ static struct console s3c24xx_serial_console = {
.setup = s3c24xx_serial_console_setup,
.data = &s3c24xx_uart_drv,
};
+#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
-int s3c24xx_serial_initconsole(struct platform_driver *drv,
- struct s3c24xx_uart_info **info)
+#ifdef CONFIG_CPU_S3C2410
+static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C2410 UART",
+ .type = PORT_S3C2410,
+ .fifosize = 16,
+ .rx_fifomask = S3C2410_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2410_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2410_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2410_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 2,
+ .clksel_mask = S3C2410_UCON_CLKMASK,
+ .clksel_shift = S3C2410_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data)
+#else
+#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
-{
- struct platform_device *dev = s3c24xx_uart_devs[0];
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C2412 UART",
+ .type = PORT_S3C2412,
+ .fifosize = 64,
+ .has_divslot = 1,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL2,
+ .num_clks = 4,
+ .clksel_mask = S3C2412_UCON_CLKMASK,
+ .clksel_shift = S3C2412_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data)
+#else
+#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
- dbg("s3c24xx_serial_initconsole\n");
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
+ defined(CONFIG_CPU_S3C2443)
+static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C2440 UART",
+ .type = PORT_S3C2440,
+ .fifosize = 64,
+ .has_divslot = 1,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL2,
+ .num_clks = 4,
+ .clksel_mask = S3C2412_UCON_CLKMASK,
+ .clksel_shift = S3C2412_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data)
+#else
+#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
- /* select driver based on the cpu */
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) || \
+ defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) || \
+ defined(CONFIG_CPU_S5PC100)
+static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C6400 UART",
+ .type = PORT_S3C6400,
+ .fifosize = 64,
+ .has_divslot = 1,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL2,
+ .num_clks = 4,
+ .clksel_mask = S3C6400_UCON_CLKMASK,
+ .clksel_shift = S3C6400_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
+#else
+#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
- if (dev == NULL) {
- printk(KERN_ERR "s3c24xx: no devices for console init\n");
- return 0;
- }
+#ifdef CONFIG_CPU_S5PV210
+static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S5PV210 UART",
+ .type = PORT_S3C6400,
+ .has_divslot = 1,
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK,
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL,
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL,
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK,
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 2,
+ .clksel_mask = S5PV210_UCON_CLKMASK,
+ .clksel_shift = S5PV210_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ .fifosize = { 256, 64, 16, 16 },
+};
+#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
+#else
+#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
- if (strcmp(dev->name, drv->driver.name) != 0)
- return 0;
+#ifdef CONFIG_CPU_EXYNOS4210
+static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung Exynos4 UART",
+ .type = PORT_S3C6400,
+ .has_divslot = 1,
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK,
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL,
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL,
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK,
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 1,
+ .clksel_mask = 0,
+ .clksel_shift = 0,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ .has_fracval = 1,
+ },
+ .fifosize = { 256, 64, 16, 16 },
+};
+#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
+#else
+#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
- s3c24xx_serial_console.data = &s3c24xx_uart_drv;
- s3c24xx_serial_init_ports(info);
+static struct platform_device_id s3c24xx_serial_driver_ids[] = {
+ {
+ .name = "s3c2410-uart",
+ .driver_data = S3C2410_SERIAL_DRV_DATA,
+ }, {
+ .name = "s3c2412-uart",
+ .driver_data = S3C2412_SERIAL_DRV_DATA,
+ }, {
+ .name = "s3c2440-uart",
+ .driver_data = S3C2440_SERIAL_DRV_DATA,
+ }, {
+ .name = "s3c6400-uart",
+ .driver_data = S3C6400_SERIAL_DRV_DATA,
+ }, {
+ .name = "s5pv210-uart",
+ .driver_data = S5PV210_SERIAL_DRV_DATA,
+ }, {
+ .name = "exynos4210-uart",
+ .driver_data = EXYNOS4210_SERIAL_DRV_DATA,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
- register_console(&s3c24xx_serial_console);
- return 0;
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_uart_dt_match[] = {
+ { .compatible = "samsung,exynos4210-uart",
+ .data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
+#else
+#define s3c24xx_uart_dt_match NULL
+#endif
+
+static struct platform_driver samsung_serial_driver = {
+ .probe = s3c24xx_serial_probe,
+ .remove = __devexit_p(s3c24xx_serial_remove),
+ .id_table = s3c24xx_serial_driver_ids,
+ .driver = {
+ .name = "samsung-uart",
+ .owner = THIS_MODULE,
+ .pm = SERIAL_SAMSUNG_PM_OPS,
+ .of_match_table = s3c24xx_uart_dt_match,
+ },
+};
+
+/* module initialisation code */
+
+static int __init s3c24xx_serial_modinit(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&s3c24xx_uart_drv);
+ if (ret < 0) {
+ printk(KERN_ERR "failed to register UART driver\n");
+ return -1;
+ }
+
+ return platform_driver_register(&samsung_serial_driver);
}
-#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
+static void __exit s3c24xx_serial_modexit(void)
+{
+ uart_unregister_driver(&s3c24xx_uart_drv);
+}
+
+module_init(s3c24xx_serial_modinit);
+module_exit(s3c24xx_serial_modexit);
+MODULE_ALIAS("platform:samsung-uart");
MODULE_DESCRIPTION("Samsung SoC Serial port driver");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index 8e87b788e5c..1a4bca3e417 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -19,20 +19,25 @@ struct s3c24xx_uart_info {
unsigned long tx_fifomask;
unsigned long tx_fifoshift;
unsigned long tx_fifofull;
+ unsigned int def_clk_sel;
+ unsigned long num_clks;
+ unsigned long clksel_mask;
+ unsigned long clksel_shift;
/* uart port features */
unsigned int has_divslot:1;
- /* clock source control */
-
- int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
- int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-
/* uart controls */
int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
};
+struct s3c24xx_serial_drv_data {
+ struct s3c24xx_uart_info *info;
+ struct s3c2410_uartcfg *def_cfg;
+ unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
+};
+
struct s3c24xx_uart_port {
unsigned char rx_claimed;
unsigned char tx_claimed;
@@ -43,10 +48,13 @@ struct s3c24xx_uart_port {
unsigned int tx_irq;
struct s3c24xx_uart_info *info;
- struct s3c24xx_uart_clksrc *clksrc;
struct clk *clk;
struct clk *baudclk;
struct uart_port port;
+ struct s3c24xx_serial_drv_data *drv_data;
+
+ /* reference to platform data */
+ struct s3c2410_uartcfg *cfg;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
@@ -56,7 +64,6 @@ struct s3c24xx_uart_port {
/* conversion functions */
#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
-#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
/* register access controls */
@@ -69,17 +76,6 @@ struct s3c24xx_uart_port {
#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
-extern int s3c24xx_serial_probe(struct platform_device *dev,
- struct s3c24xx_uart_info *uart);
-
-extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
-
-extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
- struct s3c24xx_uart_info **uart);
-
-extern int s3c24xx_serial_init(struct platform_driver *drv,
- struct s3c24xx_uart_info *info);
-
#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG
extern void printascii(const char *);
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 717ebc9ff94..600d8234851 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -264,7 +264,7 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
ret = -ENODEV;
goto err0;
}
- dwc->revision = reg & DWC3_GSNPSREV_MASK;
+ dwc->revision = reg;
dwc3_core_soft_reset(dwc);
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 8efe0fa9228..1ed56d8492d 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1748,7 +1748,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
/* rm9200 needs manual D+ pullup; off by default */
if (cpu_is_at91rm9200()) {
- if (udc->board.pullup_pin <= 0) {
+ if (gpio_is_valid(udc->board.pullup_pin)) {
DBG("no D+ pullup?\n");
retval = -ENODEV;
goto fail0;
@@ -1815,7 +1815,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
DBG("request irq %d failed\n", udc->udp_irq);
goto fail1;
}
- if (udc->board.vbus_pin > 0) {
+ if (gpio_is_valid(udc->board.vbus_pin)) {
retval = gpio_request(udc->board.vbus_pin, "udc_vbus");
if (retval < 0) {
DBG("request vbus pin failed\n");
@@ -1859,10 +1859,10 @@ static int __init at91udc_probe(struct platform_device *pdev)
INFO("%s version %s\n", driver_name, DRIVER_VERSION);
return 0;
fail4:
- if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled)
+ if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled)
free_irq(udc->board.vbus_pin, udc);
fail3:
- if (udc->board.vbus_pin > 0)
+ if (gpio_is_valid(udc->board.vbus_pin))
gpio_free(udc->board.vbus_pin);
fail2:
free_irq(udc->udp_irq, udc);
@@ -1897,7 +1897,7 @@ static int __exit at91udc_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
- if (udc->board.vbus_pin > 0) {
+ if (gpio_is_valid(udc->board.vbus_pin)) {
free_irq(udc->board.vbus_pin, udc);
gpio_free(udc->board.vbus_pin);
}
@@ -1941,7 +1941,7 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
enable_irq_wake(udc->udp_irq);
udc->active_suspend = wake;
- if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && wake)
+ if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled && wake)
enable_irq_wake(udc->board.vbus_pin);
return 0;
}
@@ -1951,7 +1951,7 @@ static int at91udc_resume(struct platform_device *pdev)
struct at91_udc *udc = platform_get_drvdata(pdev);
unsigned long flags;
- if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled &&
+ if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled &&
udc->active_suspend)
disable_irq_wake(udc->board.vbus_pin);
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 596a0b464e6..4dff83d2f26 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -130,9 +130,6 @@ ep_matches (
num_req_streams = ep_comp->bmAttributes & 0x1f;
if (num_req_streams > ep->max_streams)
return 0;
- /* Update the ep_comp descriptor if needed */
- if (num_req_streams != ep->max_streams)
- ep_comp->bmAttributes = ep->max_streams;
}
}
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index a7dc1e1d45f..2ac4ac2e4ef 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -18,7 +18,7 @@
#include "isp1760-hcd.h"
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -31,7 +31,7 @@
#include <linux/pci.h>
#endif
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
struct isp1760 {
struct usb_hcd *hcd;
int rst_gpio;
@@ -437,7 +437,7 @@ static int __init isp1760_init(void)
ret = platform_driver_register(&isp1760_plat_driver);
if (!ret)
any_ret = 0;
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
ret = platform_driver_register(&isp1760_of_driver);
if (!ret)
any_ret = 0;
@@ -457,7 +457,7 @@ module_init(isp1760_init);
static void __exit isp1760_exit(void)
{
platform_driver_unregister(&isp1760_plat_driver);
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
platform_driver_unregister(&isp1760_of_driver);
#endif
#ifdef CONFIG_PCI
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 95a9fec38e8..5df0b0e3392 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -223,7 +223,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
if (port < 0 || port >= 2)
return;
- if (pdata->vbus_pin[port] <= 0)
+ if (!gpio_is_valid(pdata->vbus_pin[port]))
return;
gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
@@ -234,7 +234,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
if (port < 0 || port >= 2)
return -EINVAL;
- if (pdata->vbus_pin[port] <= 0)
+ if (!gpio_is_valid(pdata->vbus_pin[port]))
return -EINVAL;
return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
@@ -465,7 +465,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
if (pdata) {
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
- if (pdata->vbus_pin[i] <= 0)
+ if (!gpio_is_valid(pdata->vbus_pin[i]))
continue;
gpio_request(pdata->vbus_pin[i], "ohci_vbus");
ohci_at91_usb_set_power(pdata, i, 1);
@@ -474,7 +474,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
int ret;
- if (pdata->overcurrent_pin[i] <= 0)
+ if (!gpio_is_valid(pdata->overcurrent_pin[i]))
continue;
gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent");
@@ -499,14 +499,14 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
if (pdata) {
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
- if (pdata->vbus_pin[i] <= 0)
+ if (!gpio_is_valid(pdata->vbus_pin[i]))
continue;
ohci_at91_usb_set_power(pdata, i, 0);
gpio_free(pdata->vbus_pin[i]);
}
for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
- if (pdata->overcurrent_pin[i] <= 0)
+ if (!gpio_is_valid(pdata->overcurrent_pin[i]))
continue;
free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
gpio_free(pdata->overcurrent_pin[i]);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 60ddba8066e..79cb0af779f 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -774,6 +774,10 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
if (musb->double_buffer_not_ok)
musb_writew(epio, MUSB_TXMAXP,
hw_ep->max_packet_sz_tx);
+ else if (can_bulk_split(musb, qh->type))
+ musb_writew(epio, MUSB_TXMAXP, packet_sz
+ | ((hw_ep->max_packet_sz_tx /
+ packet_sz) - 1) << 11);
else
musb_writew(epio, MUSB_TXMAXP,
qh->maxpacket |
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index 87445b2d72a..00562566ef5 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -35,6 +35,11 @@
#define DRV_NAME "AT91SAM9 Watchdog"
+#define wdt_read(field) \
+ __raw_readl(at91wdt_private.base + field)
+#define wdt_write(field, val) \
+ __raw_writel((val), at91wdt_private.base + field)
+
/* AT91SAM9 watchdog runs a 12bit counter @ 256Hz,
* use this to convert a watchdog
* value from/to milliseconds.
@@ -63,6 +68,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
static void at91_ping(unsigned long data);
static struct {
+ void __iomem *base;
unsigned long next_heartbeat; /* the next_heartbeat for the timer */
unsigned long open;
char expect_close;
@@ -77,7 +83,7 @@ static struct {
*/
static inline void at91_wdt_reset(void)
{
- at91_sys_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
+ wdt_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
}
/*
@@ -132,7 +138,7 @@ static int at91_wdt_settimeout(unsigned int timeout)
unsigned int mr;
/* Check if disabled */
- mr = at91_sys_read(AT91_WDT_MR);
+ mr = wdt_read(AT91_WDT_MR);
if (mr & AT91_WDT_WDDIS) {
printk(KERN_ERR DRV_NAME": sorry, watchdog is disabled\n");
return -EIO;
@@ -149,7 +155,7 @@ static int at91_wdt_settimeout(unsigned int timeout)
| AT91_WDT_WDDBGHLT /* disabled in debug mode */
| AT91_WDT_WDD /* restart at any time */
| (timeout & AT91_WDT_WDV); /* timer value */
- at91_sys_write(AT91_WDT_MR, reg);
+ wdt_write(AT91_WDT_MR, reg);
return 0;
}
@@ -248,12 +254,22 @@ static struct miscdevice at91wdt_miscdev = {
static int __init at91wdt_probe(struct platform_device *pdev)
{
+ struct resource *r;
int res;
if (at91wdt_miscdev.parent)
return -EBUSY;
at91wdt_miscdev.parent = &pdev->dev;
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+ at91wdt_private.base = ioremap(r->start, resource_size(r));
+ if (!at91wdt_private.base) {
+ dev_err(&pdev->dev, "failed to map registers, aborting.\n");
+ return -ENOMEM;
+ }
+
/* Set watchdog */
res = at91_wdt_settimeout(ms_to_ticks(WDT_HW_TIMEOUT * 1000));
if (res)
diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
index 757f9cab5c8..c6fbb2e6c41 100644
--- a/drivers/watchdog/at91sam9_wdt.h
+++ b/drivers/watchdog/at91sam9_wdt.h
@@ -16,11 +16,11 @@
#ifndef AT91_WDT_H
#define AT91_WDT_H
-#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */
+#define AT91_WDT_CR 0x00 /* Watchdog Control Register */
#define AT91_WDT_WDRSTT (1 << 0) /* Restart */
#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */
-#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */
+#define AT91_WDT_MR 0x04 /* Watchdog Mode Register */
#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */
#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */
#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */
@@ -30,7 +30,7 @@
#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */
#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */
-#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */
+#define AT91_WDT_SR 0x08 /* Watchdog Status Register */
#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */
#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index 03f449a430d..5b89f7d6cd0 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -76,8 +76,6 @@ static int irq;
static void __iomem *virtbase;
static unsigned long coh901327_users;
static unsigned long boot_status;
-static u16 wdogenablestore;
-static u16 irqmaskstore;
static struct device *parent;
/*
@@ -461,6 +459,10 @@ out:
}
#ifdef CONFIG_PM
+
+static u16 wdogenablestore;
+static u16 irqmaskstore;
+
static int coh901327_suspend(struct platform_device *pdev, pm_message_t state)
{
irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U;
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 3774c9b8dac..8464ea1c36a 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -231,6 +231,7 @@ static int __devinit cru_detect(unsigned long map_entry,
cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE;
+ set_memory_x((unsigned long)bios32_entrypoint, (2 * PAGE_SIZE));
asminline_call(&cmn_regs, bios32_entrypoint);
if (cmn_regs.u1.ral != 0) {
@@ -248,8 +249,10 @@ static int __devinit cru_detect(unsigned long map_entry,
if ((physical_bios_base + physical_bios_offset)) {
cru_rom_addr =
ioremap(cru_physical_address, cru_length);
- if (cru_rom_addr)
+ if (cru_rom_addr) {
+ set_memory_x((unsigned long)cru_rom_addr, cru_length);
retval = 0;
+ }
}
printk(KERN_DEBUG "hpwdt: CRU Base Address: 0x%lx\n",
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index ba6ad662635..99796c5d913 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -384,10 +384,10 @@ MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-static int turn_SMI_watchdog_clear_off = 0;
+static int turn_SMI_watchdog_clear_off = 1;
module_param(turn_SMI_watchdog_clear_off, int, 0);
MODULE_PARM_DESC(turn_SMI_watchdog_clear_off,
- "Turn off SMI clearing watchdog (default=0)");
+ "Turn off SMI clearing watchdog (depends on TCO-version)(default=1)");
/*
* Some TCO specific functions
@@ -813,7 +813,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
ret = -EIO;
goto out_unmap;
}
- if (turn_SMI_watchdog_clear_off) {
+ if (turn_SMI_watchdog_clear_off >= iTCO_wdt_private.iTCO_version) {
/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
val32 = inl(SMI_EN);
val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index cc2cfbe33b3..bfaf9bb1ee0 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -351,7 +351,7 @@ static int __devexit sp805_wdt_remove(struct amba_device *adev)
return 0;
}
-static struct amba_id sp805_wdt_ids[] __initdata = {
+static struct amba_id sp805_wdt_ids[] = {
{
.id = 0x00141805,
.mask = 0x00ffffff,
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index b3b8f2f3ad1..ede860f921d 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -621,15 +621,6 @@ static struct xenbus_watch *find_watch(const char *token)
return NULL;
}
-static void xs_reset_watches(void)
-{
- int err;
-
- err = xs_error(xs_single(XBT_NIL, XS_RESET_WATCHES, "", NULL));
- if (err && err != -EEXIST)
- printk(KERN_WARNING "xs_reset_watches failed: %d\n", err);
-}
-
/* Register callback to watch this node. */
int register_xenbus_watch(struct xenbus_watch *watch)
{
@@ -906,9 +897,5 @@ int xs_init(void)
if (IS_ERR(task))
return PTR_ERR(task);
- /* shutdown watches for kexec boot */
- if (xen_hvm_domain())
- xs_reset_watches();
-
return 0;
}
diff --git a/firmware/README.AddingFirmware b/firmware/README.AddingFirmware
index e24cd8986d8..ea78c3a17ee 100644
--- a/firmware/README.AddingFirmware
+++ b/firmware/README.AddingFirmware
@@ -12,7 +12,7 @@ here.
This directory is _NOT_ for adding arbitrary new firmware images. The
place to add those is the separate linux-firmware repository:
- git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
+ git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
That repository contains all these firmware images which have been
extracted from older drivers, as well various new firmware images which
@@ -22,6 +22,7 @@ been permitted to redistribute under separate cover.
To submit firmware to that repository, please send either a git binary
diff or preferably a git pull request to:
David Woodhouse <dwmw2@infradead.org>
+ Ben Hutchings <ben@decadent.org.uk>
Your commit should include an update to the WHENCE file clearly
identifying the licence under which the firmware is available, and
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index cb97174e236..0b394580d86 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -563,8 +563,8 @@ static struct btrfs_worker_thread *find_worker(struct btrfs_workers *workers)
struct list_head *fallback;
int ret;
-again:
spin_lock_irqsave(&workers->lock, flags);
+again:
worker = next_worker(workers);
if (!worker) {
@@ -579,6 +579,7 @@ again:
spin_unlock_irqrestore(&workers->lock, flags);
/* we're below the limit, start another worker */
ret = __btrfs_start_workers(workers);
+ spin_lock_irqsave(&workers->lock, flags);
if (ret)
goto fallback;
goto again;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 0a6b928813a..fd1a06df5bc 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4590,10 +4590,6 @@ static int btrfs_add_nondir(struct btrfs_trans_handle *trans,
int err = btrfs_add_link(trans, dir, inode,
dentry->d_name.name, dentry->d_name.len,
backref, index);
- if (!err) {
- d_instantiate(dentry, inode);
- return 0;
- }
if (err > 0)
err = -EEXIST;
return err;
@@ -4655,6 +4651,7 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry,
else {
init_special_inode(inode, inode->i_mode, rdev);
btrfs_update_inode(trans, root, inode);
+ d_instantiate(dentry, inode);
}
out_unlock:
nr = trans->blocks_used;
@@ -4722,6 +4719,7 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry,
inode->i_mapping->a_ops = &btrfs_aops;
inode->i_mapping->backing_dev_info = &root->fs_info->bdi;
BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops;
+ d_instantiate(dentry, inode);
}
out_unlock:
nr = trans->blocks_used;
@@ -4779,6 +4777,7 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
struct dentry *parent = dentry->d_parent;
err = btrfs_update_inode(trans, root, inode);
BUG_ON(err);
+ d_instantiate(dentry, inode);
btrfs_log_new_name(trans, inode, NULL, parent);
}
@@ -7245,6 +7244,8 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry,
drop_inode = 1;
out_unlock:
+ if (!err)
+ d_instantiate(dentry, inode);
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
if (drop_inode) {
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 3eeb9766126..98954003a8d 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -1094,42 +1094,19 @@ static int ceph_snapdir_d_revalidate(struct dentry *dentry,
/*
* Set/clear/test dir complete flag on the dir's dentry.
*/
-static struct dentry * __d_find_any_alias(struct inode *inode)
-{
- struct dentry *alias;
-
- if (list_empty(&inode->i_dentry))
- return NULL;
- alias = list_first_entry(&inode->i_dentry, struct dentry, d_alias);
- return alias;
-}
-
void ceph_dir_set_complete(struct inode *inode)
{
- struct dentry *dentry = __d_find_any_alias(inode);
-
- if (dentry && ceph_dentry(dentry)) {
- dout(" marking %p (%p) complete\n", inode, dentry);
- set_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
- }
+ /* not yet implemented */
}
void ceph_dir_clear_complete(struct inode *inode)
{
- struct dentry *dentry = __d_find_any_alias(inode);
-
- if (dentry && ceph_dentry(dentry)) {
- dout(" marking %p (%p) NOT complete\n", inode, dentry);
- clear_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
- }
+ /* not yet implemented */
}
bool ceph_dir_test_complete(struct inode *inode)
{
- struct dentry *dentry = __d_find_any_alias(inode);
-
- if (dentry && ceph_dentry(dentry))
- return test_bit(CEPH_D_COMPLETE, &ceph_dentry(dentry)->flags);
+ /* not yet implemented */
return false;
}
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index ac86f8b3e3c..517f211a3bd 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -47,17 +47,6 @@ struct wb_writeback_work {
struct completion *done; /* set if the caller waits */
};
-const char *wb_reason_name[] = {
- [WB_REASON_BACKGROUND] = "background",
- [WB_REASON_TRY_TO_FREE_PAGES] = "try_to_free_pages",
- [WB_REASON_SYNC] = "sync",
- [WB_REASON_PERIODIC] = "periodic",
- [WB_REASON_LAPTOP_TIMER] = "laptop_timer",
- [WB_REASON_FREE_MORE_MEM] = "free_more_memory",
- [WB_REASON_FS_FREE_SPACE] = "fs_free_space",
- [WB_REASON_FORKER_THREAD] = "forker_thread"
-};
-
/*
* Include the creation of the trace points after defining the
* wb_writeback_work structure so that the definition remains local to this
diff --git a/fs/locks.c b/fs/locks.c
index 3b0d05dcd7c..637694bf3a0 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1205,6 +1205,8 @@ int __break_lease(struct inode *inode, unsigned int mode)
int want_write = (mode & O_ACCMODE) != O_RDONLY;
new_fl = lease_alloc(NULL, want_write ? F_WRLCK : F_RDLCK);
+ if (IS_ERR(new_fl))
+ return PTR_ERR(new_fl);
lock_flocks();
@@ -1221,12 +1223,6 @@ int __break_lease(struct inode *inode, unsigned int mode)
if (fl->fl_owner == current->files)
i_have_this_lease = 1;
- if (IS_ERR(new_fl) && !i_have_this_lease
- && ((mode & O_NONBLOCK) == 0)) {
- error = PTR_ERR(new_fl);
- goto out;
- }
-
break_time = 0;
if (lease_break_time > 0) {
break_time = jiffies + lease_break_time * HZ;
@@ -1284,8 +1280,7 @@ restart:
out:
unlock_flocks();
- if (!IS_ERR(new_fl))
- locks_free_lock(new_fl);
+ locks_free_lock(new_fl);
return error;
}
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index eca56d4b39c..606ef0f20ae 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -147,7 +147,7 @@ static loff_t nfs_file_llseek(struct file *filp, loff_t offset, int origin)
* origin == SEEK_END || SEEK_DATA || SEEK_HOLE => we must revalidate
* the cached file length
*/
- if (origin != SEEK_SET || origin != SEEK_CUR) {
+ if (origin != SEEK_SET && origin != SEEK_CUR) {
struct inode *inode = filp->f_mapping->host;
int retval = nfs_revalidate_file_size(inode, filp);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index be2bbac1381..d9f4d78c341 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -39,6 +39,8 @@
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
+#include <linux/ratelimit.h>
+#include <linux/printk.h>
#include <linux/slab.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/gss_api.h>
@@ -894,6 +896,8 @@ out:
static int can_open_delegated(struct nfs_delegation *delegation, fmode_t fmode)
{
+ if (delegation == NULL)
+ return 0;
if ((delegation->type & fmode) != fmode)
return 0;
if (test_bit(NFS_DELEGATION_NEED_RECLAIM, &delegation->flags))
@@ -1036,8 +1040,7 @@ static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata)
}
rcu_read_lock();
delegation = rcu_dereference(nfsi->delegation);
- if (delegation == NULL ||
- !can_open_delegated(delegation, fmode)) {
+ if (!can_open_delegated(delegation, fmode)) {
rcu_read_unlock();
break;
}
@@ -1091,7 +1094,12 @@ static struct nfs4_state *nfs4_opendata_to_nfs4_state(struct nfs4_opendata *data
if (delegation)
delegation_flags = delegation->flags;
rcu_read_unlock();
- if ((delegation_flags & 1UL<<NFS_DELEGATION_NEED_RECLAIM) == 0)
+ if (data->o_arg.claim == NFS4_OPEN_CLAIM_DELEGATE_CUR) {
+ pr_err_ratelimited("NFS: Broken NFSv4 server %s is "
+ "returning a delegation for "
+ "OPEN(CLAIM_DELEGATE_CUR)\n",
+ NFS_CLIENT(inode)->cl_server);
+ } else if ((delegation_flags & 1UL<<NFS_DELEGATION_NEED_RECLAIM) == 0)
nfs_inode_set_delegation(state->inode,
data->owner->so_cred,
&data->o_res);
@@ -1423,11 +1431,9 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata)
goto out_no_action;
rcu_read_lock();
delegation = rcu_dereference(NFS_I(data->state->inode)->delegation);
- if (delegation != NULL &&
- test_bit(NFS_DELEGATION_NEED_RECLAIM, &delegation->flags) == 0) {
- rcu_read_unlock();
- goto out_no_action;
- }
+ if (data->o_arg.claim != NFS4_OPEN_CLAIM_DELEGATE_CUR &&
+ can_open_delegated(delegation, data->o_arg.fmode))
+ goto unlock_no_action;
rcu_read_unlock();
}
/* Update sequence id. */
@@ -1444,6 +1450,8 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata)
return;
rpc_call_start(task);
return;
+unlock_no_action:
+ rcu_read_unlock();
out_no_action:
task->tk_action = NULL;
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 39914be40b0..6a7107ae6b7 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -1156,11 +1156,13 @@ restart:
if (status >= 0) {
status = nfs4_reclaim_locks(state, ops);
if (status >= 0) {
+ spin_lock(&state->state_lock);
list_for_each_entry(lock, &state->lock_states, ls_locks) {
if (!(lock->ls_flags & NFS_LOCK_INITIALIZED))
printk("%s: Lock reclaim failed!\n",
__func__);
}
+ spin_unlock(&state->state_lock);
nfs4_put_open_state(state);
goto restart;
}
@@ -1224,10 +1226,12 @@ static void nfs4_clear_open_state(struct nfs4_state *state)
clear_bit(NFS_O_RDONLY_STATE, &state->flags);
clear_bit(NFS_O_WRONLY_STATE, &state->flags);
clear_bit(NFS_O_RDWR_STATE, &state->flags);
+ spin_lock(&state->state_lock);
list_for_each_entry(lock, &state->lock_states, ls_locks) {
lock->ls_seqid.flags = 0;
lock->ls_flags &= ~NFS_LOCK_INITIALIZED;
}
+ spin_unlock(&state->state_lock);
}
static void nfs4_reset_seqids(struct nfs_server *server,
@@ -1350,12 +1354,14 @@ static void nfs4_warn_keyexpired(const char *s)
static int nfs4_recovery_handle_error(struct nfs_client *clp, int error)
{
switch (error) {
+ case 0:
+ break;
case -NFS4ERR_CB_PATH_DOWN:
nfs_handle_cb_pathdown(clp);
- return 0;
+ break;
case -NFS4ERR_NO_GRACE:
nfs4_state_end_reclaim_reboot(clp);
- return 0;
+ break;
case -NFS4ERR_STALE_CLIENTID:
case -NFS4ERR_LEASE_MOVED:
set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
@@ -1375,13 +1381,15 @@ static int nfs4_recovery_handle_error(struct nfs_client *clp, int error)
case -NFS4ERR_SEQ_MISORDERED:
set_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state);
/* Zero session reset errors */
- return 0;
+ break;
case -EKEYEXPIRED:
/* Nothing we can do */
nfs4_warn_keyexpired(clp->cl_hostname);
- return 0;
+ break;
+ default:
+ return error;
}
- return error;
+ return 0;
}
static int nfs4_do_reclaim(struct nfs_client *clp, const struct nfs4_state_recovery_ops *ops)
@@ -1428,7 +1436,7 @@ static int nfs4_check_lease(struct nfs_client *clp)
struct rpc_cred *cred;
const struct nfs4_state_maintenance_ops *ops =
clp->cl_mvops->state_renewal_ops;
- int status = -NFS4ERR_EXPIRED;
+ int status;
/* Is the client already known to have an expired lease? */
if (test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state))
@@ -1438,6 +1446,7 @@ static int nfs4_check_lease(struct nfs_client *clp)
spin_unlock(&clp->cl_lock);
if (cred == NULL) {
cred = nfs4_get_setclientid_cred(clp);
+ status = -ENOKEY;
if (cred == NULL)
goto out;
}
@@ -1525,16 +1534,16 @@ void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags)
{
if (!flags)
return;
- else if (flags & SEQ4_STATUS_RESTART_RECLAIM_NEEDED)
+ if (flags & SEQ4_STATUS_RESTART_RECLAIM_NEEDED)
nfs41_handle_server_reboot(clp);
- else if (flags & (SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED |
+ if (flags & (SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED |
SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED |
SEQ4_STATUS_ADMIN_STATE_REVOKED |
SEQ4_STATUS_LEASE_MOVED))
nfs41_handle_state_revoked(clp);
- else if (flags & SEQ4_STATUS_RECALLABLE_STATE_REVOKED)
+ if (flags & SEQ4_STATUS_RECALLABLE_STATE_REVOKED)
nfs41_handle_recallable_state_revoked(clp);
- else if (flags & (SEQ4_STATUS_CB_PATH_DOWN |
+ if (flags & (SEQ4_STATUS_CB_PATH_DOWN |
SEQ4_STATUS_BACKCHANNEL_FAULT |
SEQ4_STATUS_CB_PATH_DOWN_SESSION))
nfs41_handle_cb_path_down(clp);
@@ -1662,10 +1671,10 @@ static void nfs4_state_manager(struct nfs_client *clp)
if (test_and_clear_bit(NFS4CLNT_CHECK_LEASE, &clp->cl_state)) {
status = nfs4_check_lease(clp);
+ if (status < 0)
+ goto out_error;
if (test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state))
continue;
- if (status < 0 && status != -NFS4ERR_CB_PATH_DOWN)
- goto out_error;
}
/* Initialize or reset the session */
diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 41d6743d303..ac258beeda3 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -625,6 +625,9 @@ static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp,
if (argv[n].v_nmembs > nsegs * nilfs->ns_blocks_per_segment)
goto out_free;
+ if (argv[n].v_nmembs >= UINT_MAX / argv[n].v_size)
+ goto out_free;
+
len = argv[n].v_size * argv[n].v_nmembs;
base = (void __user *)(unsigned long)argv[n].v_base;
if (len == 0) {
@@ -842,6 +845,19 @@ long nilfs_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
case FS_IOC32_GETVERSION:
cmd = FS_IOC_GETVERSION;
break;
+ case NILFS_IOCTL_CHANGE_CPMODE:
+ case NILFS_IOCTL_DELETE_CHECKPOINT:
+ case NILFS_IOCTL_GET_CPINFO:
+ case NILFS_IOCTL_GET_CPSTAT:
+ case NILFS_IOCTL_GET_SUINFO:
+ case NILFS_IOCTL_GET_SUSTAT:
+ case NILFS_IOCTL_GET_VINFO:
+ case NILFS_IOCTL_GET_BDESCS:
+ case NILFS_IOCTL_CLEAN_SEGMENTS:
+ case NILFS_IOCTL_SYNC:
+ case NILFS_IOCTL_RESIZE:
+ case NILFS_IOCTL_SET_ALLOC_RANGE:
+ break;
default:
return -ENOIOCTLCMD;
}
diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index 2a30d67dd6b..0855e6f2039 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -32,7 +32,7 @@ static cputime64_t get_idle_time(int cpu)
idle = kstat_cpu(cpu).cpustat.idle;
idle = cputime64_add(idle, arch_idle_time(cpu));
} else
- idle = nsecs_to_jiffies64(1000 * idle_time);
+ idle = usecs_to_cputime64(idle_time);
return idle;
}
@@ -46,7 +46,7 @@ static cputime64_t get_iowait_time(int cpu)
/* !NO_HZ so we can rely on cpustat.iowait */
iowait = kstat_cpu(cpu).cpustat.iowait;
else
- iowait = nsecs_to_jiffies64(1000 * iowait_time);
+ iowait = usecs_to_cputime64(iowait_time);
return iowait;
}
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 3eca58f51ae..8a899496fd5 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -869,27 +869,6 @@ xfs_fs_dirty_inode(
}
STATIC int
-xfs_log_inode(
- struct xfs_inode *ip)
-{
- struct xfs_mount *mp = ip->i_mount;
- struct xfs_trans *tp;
- int error;
-
- tp = xfs_trans_alloc(mp, XFS_TRANS_FSYNC_TS);
- error = xfs_trans_reserve(tp, 0, XFS_FSYNC_TS_LOG_RES(mp), 0, 0, 0);
- if (error) {
- xfs_trans_cancel(tp, 0);
- return error;
- }
-
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
- xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- return xfs_trans_commit(tp, 0);
-}
-
-STATIC int
xfs_fs_write_inode(
struct inode *inode,
struct writeback_control *wbc)
@@ -902,10 +881,8 @@ xfs_fs_write_inode(
if (XFS_FORCED_SHUTDOWN(mp))
return -XFS_ERROR(EIO);
- if (!ip->i_update_core)
- return 0;
- if (wbc->sync_mode == WB_SYNC_ALL) {
+ if (wbc->sync_mode == WB_SYNC_ALL || wbc->for_kupdate) {
/*
* Make sure the inode has made it it into the log. Instead
* of forcing it all the way to stable storage using a
@@ -913,11 +890,14 @@ xfs_fs_write_inode(
* ->sync_fs call do that for thus, which reduces the number
* of synchronous log forces dramatically.
*/
- error = xfs_log_inode(ip);
+ error = xfs_log_dirty_inode(ip, NULL, 0);
if (error)
goto out;
return 0;
} else {
+ if (!ip->i_update_core)
+ return 0;
+
/*
* We make this non-blocking if the inode is contended, return
* EAGAIN to indicate to the caller that they did not succeed.
diff --git a/fs/xfs/xfs_sync.c b/fs/xfs/xfs_sync.c
index be5c51d8f75..f0994aedcd1 100644
--- a/fs/xfs/xfs_sync.c
+++ b/fs/xfs/xfs_sync.c
@@ -336,6 +336,32 @@ xfs_sync_fsdata(
return error;
}
+int
+xfs_log_dirty_inode(
+ struct xfs_inode *ip,
+ struct xfs_perag *pag,
+ int flags)
+{
+ struct xfs_mount *mp = ip->i_mount;
+ struct xfs_trans *tp;
+ int error;
+
+ if (!ip->i_update_core)
+ return 0;
+
+ tp = xfs_trans_alloc(mp, XFS_TRANS_FSYNC_TS);
+ error = xfs_trans_reserve(tp, 0, XFS_FSYNC_TS_LOG_RES(mp), 0, 0, 0);
+ if (error) {
+ xfs_trans_cancel(tp, 0);
+ return error;
+ }
+
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+ xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
+ xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
+ return xfs_trans_commit(tp, 0);
+}
+
/*
* When remounting a filesystem read-only or freezing the filesystem, we have
* two phases to execute. This first phase is syncing the data before we
@@ -359,6 +385,16 @@ xfs_quiesce_data(
{
int error, error2 = 0;
+ /*
+ * Log all pending size and timestamp updates. The vfs writeback
+ * code is supposed to do this, but due to its overagressive
+ * livelock detection it will skip inodes where appending writes
+ * were written out in the first non-blocking sync phase if their
+ * completion took long enough that it happened after taking the
+ * timestamp for the cut-off in the blocking phase.
+ */
+ xfs_inode_ag_iterator(mp, xfs_log_dirty_inode, 0);
+
xfs_qm_sync(mp, SYNC_TRYLOCK);
xfs_qm_sync(mp, SYNC_WAIT);
diff --git a/fs/xfs/xfs_sync.h b/fs/xfs/xfs_sync.h
index 941202e7ac6..fa965479d78 100644
--- a/fs/xfs/xfs_sync.h
+++ b/fs/xfs/xfs_sync.h
@@ -34,6 +34,8 @@ void xfs_quiesce_attr(struct xfs_mount *mp);
void xfs_flush_inodes(struct xfs_inode *ip);
+int xfs_log_dirty_inode(struct xfs_inode *ip, struct xfs_perag *pag, int flags);
+
int xfs_reclaim_inodes(struct xfs_mount *mp, int mode);
int xfs_reclaim_inodes_count(struct xfs_mount *mp);
void xfs_reclaim_inodes_nr(struct xfs_mount *mp, int nr_to_scan);
diff --git a/include/asm-generic/cputime.h b/include/asm-generic/cputime.h
index 62ce6823c0f..12a1764f612 100644
--- a/include/asm-generic/cputime.h
+++ b/include/asm-generic/cputime.h
@@ -40,6 +40,7 @@ typedef u64 cputime64_t;
*/
#define cputime_to_usecs(__ct) jiffies_to_usecs(__ct)
#define usecs_to_cputime(__msecs) usecs_to_jiffies(__msecs)
+#define usecs_to_cputime64(__msecs) nsecs_to_jiffies64((__msecs) * 1000)
/*
* Convert cputime to seconds and back.
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
index d12f077a6da..12e023c19ac 100644
--- a/include/linux/amba/pl330.h
+++ b/include/linux/amba/pl330.h
@@ -12,17 +12,9 @@
#ifndef __AMBA_PL330_H_
#define __AMBA_PL330_H_
+#include <linux/dmaengine.h>
#include <asm/hardware/pl330.h>
-struct dma_pl330_peri {
- /*
- * Peri_Req i/f of the DMAC that is
- * peripheral could be reached from.
- */
- u8 peri_id; /* specific dma id */
- enum pl330_reqtype rqtype;
-};
-
struct dma_pl330_platdata {
/*
* Number of valid peripherals connected to DMAC.
@@ -33,9 +25,12 @@ struct dma_pl330_platdata {
*/
u8 nr_valid_peri;
/* Array of valid peripherals */
- struct dma_pl330_peri *peri;
+ u8 *peri_id;
+ /* Operational capabilities */
+ dma_cap_mask_t cap_mask;
/* Bytes to allocate for MC buffer */
unsigned mcbuf_sz;
};
+extern bool pl330_filter(struct dma_chan *chan, void *param);
#endif /* __AMBA_PL330_H_ */
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index c86c940d1de..081147da056 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -71,7 +71,7 @@ struct timecounter {
/**
* cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds
- * @tc: Pointer to cycle counter.
+ * @cc: Pointer to cycle counter.
* @cycles: Cycles
*
* XXX - This could use some mult_lxl_ll() asm optimization. Same code
@@ -114,7 +114,7 @@ extern u64 timecounter_read(struct timecounter *tc);
* time base as values returned by
* timecounter_read()
* @tc: Pointer to time counter.
- * @cycle: a value returned by tc->cc->read()
+ * @cycle_tstamp: a value returned by tc->cc->read()
*
* Cycle counts that are converted correctly as long as they
* fall into the interval [-1/2 max cycle count, +1/2 max cycle count],
@@ -156,11 +156,12 @@ extern u64 timecounter_cyc2time(struct timecounter *tc,
* @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
* @max_idle_ns: max idle time permitted by the clocksource (nsecs)
- * @maxadj maximum adjustment value to mult (~11%)
+ * @maxadj: maximum adjustment value to mult (~11%)
* @flags: flags describing special properties
* @archdata: arch-specific data
* @suspend: suspend function for the clocksource, if necessary
* @resume: resume function for the clocksource, if necessary
+ * @cycle_last: most recent cycle counter value seen by ::read()
*/
struct clocksource {
/*
@@ -187,6 +188,7 @@ struct clocksource {
void (*suspend)(struct clocksource *cs);
void (*resume)(struct clocksource *cs);
+ /* private: */
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
/* Watchdog related data, used by the framework */
struct list_head wd_list;
@@ -261,6 +263,9 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
/**
* clocksource_cyc2ns - converts clocksource cycles to nanoseconds
+ * @cycles: cycles
+ * @mult: cycle to nanosecond multiplier
+ * @shift: cycle to nanosecond divisor (power of two)
*
* Converts cycles to nanoseconds, using the given mult and shift.
*
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 99834e581b9..bd4272b61a1 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -91,10 +91,11 @@ static inline unsigned int irq_domain_to_irq(struct irq_domain *d,
extern void irq_domain_add(struct irq_domain *domain);
extern void irq_domain_del(struct irq_domain *domain);
+
+extern struct irq_domain_ops irq_domain_simple_ops;
#endif /* CONFIG_IRQ_DOMAIN */
#if defined(CONFIG_IRQ_DOMAIN) && defined(CONFIG_OF_IRQ)
-extern struct irq_domain_ops irq_domain_simple_ops;
extern void irq_domain_add_simple(struct device_node *controller, int irq_base);
extern void irq_domain_generate_simple(const struct of_device_id *match,
u64 phys_base, unsigned int irq_start);
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index c3892fc1d53..68e67e50d02 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -557,6 +557,7 @@ struct kvm_ppc_pvinfo {
#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */
#define KVM_CAP_PPC_PAPR 68
#define KVM_CAP_S390_GMAP 71
+#define KVM_CAP_TSC_DEADLINE_TIMER 72
#ifdef KVM_CAP_IRQ_ROUTING
diff --git a/include/linux/lglock.h b/include/linux/lglock.h
index f549056fb20..87f402ccec5 100644
--- a/include/linux/lglock.h
+++ b/include/linux/lglock.h
@@ -22,6 +22,7 @@
#include <linux/spinlock.h>
#include <linux/lockdep.h>
#include <linux/percpu.h>
+#include <linux/cpu.h>
/* can make br locks by using local lock for read side, global lock for write */
#define br_lock_init(name) name##_lock_init()
@@ -72,9 +73,31 @@
#define DEFINE_LGLOCK(name) \
\
+ DEFINE_SPINLOCK(name##_cpu_lock); \
+ cpumask_t name##_cpus __read_mostly; \
DEFINE_PER_CPU(arch_spinlock_t, name##_lock); \
DEFINE_LGLOCK_LOCKDEP(name); \
\
+ static int \
+ name##_lg_cpu_callback(struct notifier_block *nb, \
+ unsigned long action, void *hcpu) \
+ { \
+ switch (action & ~CPU_TASKS_FROZEN) { \
+ case CPU_UP_PREPARE: \
+ spin_lock(&name##_cpu_lock); \
+ cpu_set((unsigned long)hcpu, name##_cpus); \
+ spin_unlock(&name##_cpu_lock); \
+ break; \
+ case CPU_UP_CANCELED: case CPU_DEAD: \
+ spin_lock(&name##_cpu_lock); \
+ cpu_clear((unsigned long)hcpu, name##_cpus); \
+ spin_unlock(&name##_cpu_lock); \
+ } \
+ return NOTIFY_OK; \
+ } \
+ static struct notifier_block name##_lg_cpu_notifier = { \
+ .notifier_call = name##_lg_cpu_callback, \
+ }; \
void name##_lock_init(void) { \
int i; \
LOCKDEP_INIT_MAP(&name##_lock_dep_map, #name, &name##_lock_key, 0); \
@@ -83,6 +106,11 @@
lock = &per_cpu(name##_lock, i); \
*lock = (arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED; \
} \
+ register_hotcpu_notifier(&name##_lg_cpu_notifier); \
+ get_online_cpus(); \
+ for_each_online_cpu(i) \
+ cpu_set(i, name##_cpus); \
+ put_online_cpus(); \
} \
EXPORT_SYMBOL(name##_lock_init); \
\
@@ -124,9 +152,9 @@
\
void name##_global_lock_online(void) { \
int i; \
- preempt_disable(); \
+ spin_lock(&name##_cpu_lock); \
rwlock_acquire(&name##_lock_dep_map, 0, 0, _RET_IP_); \
- for_each_online_cpu(i) { \
+ for_each_cpu(i, &name##_cpus) { \
arch_spinlock_t *lock; \
lock = &per_cpu(name##_lock, i); \
arch_spin_lock(lock); \
@@ -137,12 +165,12 @@
void name##_global_unlock_online(void) { \
int i; \
rwlock_release(&name##_lock_dep_map, 1, _RET_IP_); \
- for_each_online_cpu(i) { \
+ for_each_cpu(i, &name##_cpus) { \
arch_spinlock_t *lock; \
lock = &per_cpu(name##_lock, i); \
arch_spin_unlock(lock); \
} \
- preempt_enable(); \
+ spin_unlock(&name##_cpu_lock); \
} \
EXPORT_SYMBOL(name##_global_unlock_online); \
\
diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h
new file mode 100644
index 00000000000..b081c7245ec
--- /dev/null
+++ b/include/linux/platform_data/macb.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACB_PDATA_H__
+#define __MACB_PDATA_H__
+
+struct macb_platform_data {
+ u32 phy_mask;
+ int phy_irq_pin; /* PHY IRQ */
+ u8 is_rmii; /* using RMII interface? */
+};
+
+#endif /* __MACB_PDATA_H__ */
diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h
new file mode 100644
index 00000000000..9929b05cff3
--- /dev/null
+++ b/include/media/davinci/vpif_types.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPIF_TYPES_H
+#define _VPIF_TYPES_H
+
+#define VPIF_CAPTURE_MAX_CHANNELS 2
+
+enum vpif_if_type {
+ VPIF_IF_BT656,
+ VPIF_IF_BT1120,
+ VPIF_IF_RAW_BAYER
+};
+
+struct vpif_interface {
+ enum vpif_if_type if_type;
+ unsigned hd_pol:1;
+ unsigned vd_pol:1;
+ unsigned fid_pol:1;
+};
+
+struct vpif_subdev_info {
+ const char *name;
+ struct i2c_board_info board_info;
+ u32 input;
+ u32 output;
+ unsigned can_route:1;
+ struct vpif_interface vpif_if;
+};
+
+struct vpif_display_config {
+ int (*set_clock)(int, int);
+ struct vpif_subdev_info *subdevinfo;
+ int subdev_count;
+ const char **output;
+ int output_count;
+ const char *card_name;
+};
+
+struct vpif_input {
+ struct v4l2_input input;
+ const char *subdev_name;
+};
+
+struct vpif_capture_chan_config {
+ const struct vpif_input *inputs;
+ int input_count;
+};
+
+struct vpif_capture_config {
+ int (*setup_input_channel_mode)(int);
+ int (*setup_input_path)(int, const char *);
+ struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
+ struct vpif_subdev_info *subdev_info;
+ int subdev_count;
+ const char *card_name;
+};
+#endif /* _VPIF_TYPES_H */
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index b1377b931eb..5fb2c3d10c0 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -254,7 +254,7 @@ unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl,
static inline struct video_device *soc_camera_i2c_to_vdev(const struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
- struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id;
+ struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd);
return icd ? icd->vdev : NULL;
}
@@ -279,6 +279,11 @@ static inline struct soc_camera_device *soc_camera_from_vbq(const struct videobu
return container_of(vq, struct soc_camera_device, vb_vidq);
}
+static inline u32 soc_camera_grp_id(const struct soc_camera_device *icd)
+{
+ return (icd->iface << 8) | (icd->devnum + 1);
+}
+
void soc_camera_lock(struct vb2_queue *vq);
void soc_camera_unlock(struct vb2_queue *vq);
diff --git a/include/net/dst.h b/include/net/dst.h
index 6faec1a6021..75766b42660 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -53,6 +53,7 @@ struct dst_entry {
#define DST_NOHASH 0x0008
#define DST_NOCACHE 0x0010
#define DST_NOCOUNT 0x0020
+#define DST_NOPEER 0x0040
short error;
short obsolete;
diff --git a/include/net/flow.h b/include/net/flow.h
index a09447749e2..57f15a7f1cd 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -207,6 +207,7 @@ extern struct flow_cache_object *flow_cache_lookup(
u8 dir, flow_resolve_t resolver, void *ctx);
extern void flow_cache_flush(void);
+extern void flow_cache_flush_deferred(void);
extern atomic_t flow_cache_genid;
#endif
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 873d5be7926..e5a7b9aaf55 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -1207,7 +1207,7 @@ extern void ip_vs_control_cleanup(void);
extern struct ip_vs_dest *
ip_vs_find_dest(struct net *net, int af, const union nf_inet_addr *daddr,
__be16 dport, const union nf_inet_addr *vaddr, __be16 vport,
- __u16 protocol, __u32 fwmark);
+ __u16 protocol, __u32 fwmark, __u32 flags);
extern struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp);
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index e90e7a9935d..a15432da27c 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -241,6 +241,9 @@ extern struct sctp_globals {
* bits is an indicator of when to send and window update SACK.
*/
int rwnd_update_shift;
+
+ /* Threshold for autoclose timeout, in seconds. */
+ unsigned long max_autoclose;
} sctp_globals;
#define sctp_rto_initial (sctp_globals.rto_initial)
@@ -281,6 +284,7 @@ extern struct sctp_globals {
#define sctp_auth_enable (sctp_globals.auth_enable)
#define sctp_checksum_disable (sctp_globals.checksum_disable)
#define sctp_rwnd_upd_shift (sctp_globals.rwnd_update_shift)
+#define sctp_max_autoclose (sctp_globals.max_autoclose)
/* SCTP Socket type: UDP or TCP style. */
typedef enum {
diff --git a/include/net/sock.h b/include/net/sock.h
index abb6e0f0c3c..32e39371fba 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -637,12 +637,14 @@ static inline void __sk_add_backlog(struct sock *sk, struct sk_buff *skb)
/*
* Take into account size of receive queue and backlog queue
+ * Do not take into account this skb truesize,
+ * to allow even a single big packet to come.
*/
static inline bool sk_rcvqueues_full(const struct sock *sk, const struct sk_buff *skb)
{
unsigned int qsize = sk->sk_backlog.len + atomic_read(&sk->sk_rmem_alloc);
- return qsize + skb->truesize > sk->sk_rcvbuf;
+ return qsize > sk->sk_rcvbuf;
}
/* The per-socket spinlock must be held here. */
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index d1e95c6ac77..5a35a2a2d3c 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -147,6 +147,7 @@ struct fcoe_ctlr {
u8 map_dest;
u8 spma;
u8 probe_tries;
+ u8 priority;
u8 dest_addr[ETH_ALEN];
u8 ctl_src_addr[ETH_ALEN];
@@ -301,6 +302,7 @@ struct fcoe_percpu_s {
* @lport: The associated local port
* @fcoe_pending_queue: The pending Rx queue of skbs
* @fcoe_pending_queue_active: Indicates if the pending queue is active
+ * @priority: Packet priority (DCB)
* @max_queue_depth: Max queue depth of pending queue
* @min_queue_depth: Min queue depth of pending queue
* @timer: The queue timer
@@ -316,6 +318,7 @@ struct fcoe_port {
struct fc_lport *lport;
struct sk_buff_head fcoe_pending_queue;
u8 fcoe_pending_queue_active;
+ u8 priority;
u32 max_queue_depth;
u32 min_queue_depth;
struct timer_list timer;
diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
index b99caa8b780..99d1d0decf8 100644
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -21,6 +21,16 @@
{I_REFERENCED, "I_REFERENCED"} \
)
+#define WB_WORK_REASON \
+ {WB_REASON_BACKGROUND, "background"}, \
+ {WB_REASON_TRY_TO_FREE_PAGES, "try_to_free_pages"}, \
+ {WB_REASON_SYNC, "sync"}, \
+ {WB_REASON_PERIODIC, "periodic"}, \
+ {WB_REASON_LAPTOP_TIMER, "laptop_timer"}, \
+ {WB_REASON_FREE_MORE_MEM, "free_more_memory"}, \
+ {WB_REASON_FS_FREE_SPACE, "fs_free_space"}, \
+ {WB_REASON_FORKER_THREAD, "forker_thread"}
+
struct wb_writeback_work;
DECLARE_EVENT_CLASS(writeback_work_class,
@@ -55,7 +65,7 @@ DECLARE_EVENT_CLASS(writeback_work_class,
__entry->for_kupdate,
__entry->range_cyclic,
__entry->for_background,
- wb_reason_name[__entry->reason]
+ __print_symbolic(__entry->reason, WB_WORK_REASON)
)
);
#define DEFINE_WRITEBACK_WORK_EVENT(name) \
@@ -184,7 +194,8 @@ TRACE_EVENT(writeback_queue_io,
__entry->older, /* older_than_this in jiffies */
__entry->age, /* older_than_this in relative milliseconds */
__entry->moved,
- wb_reason_name[__entry->reason])
+ __print_symbolic(__entry->reason, WB_WORK_REASON)
+ )
);
TRACE_EVENT(global_dirty_state,
diff --git a/include/xen/interface/io/xs_wire.h b/include/xen/interface/io/xs_wire.h
index f0b6890370b..f6f07aa35af 100644
--- a/include/xen/interface/io/xs_wire.h
+++ b/include/xen/interface/io/xs_wire.h
@@ -29,8 +29,7 @@ enum xsd_sockmsg_type
XS_IS_DOMAIN_INTRODUCED,
XS_RESUME,
XS_SET_TARGET,
- XS_RESTRICT,
- XS_RESET_WATCHES
+ XS_RESTRICT
};
#define XS_WRITE_NONE "NONE"
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index d9d5648f3cd..a184470cf9b 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2098,11 +2098,6 @@ int cgroup_attach_proc(struct cgroup *cgrp, struct task_struct *leader)
continue;
/* get old css_set pointer */
task_lock(tsk);
- if (tsk->flags & PF_EXITING) {
- /* ignore this task if it's going away */
- task_unlock(tsk);
- continue;
- }
oldcg = tsk->cgroups;
get_css_set(oldcg);
task_unlock(tsk);
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 9fe58c46a42..0b1712dba58 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -123,6 +123,19 @@ static inline struct cpuset *task_cs(struct task_struct *task)
struct cpuset, css);
}
+#ifdef CONFIG_NUMA
+static inline bool task_has_mempolicy(struct task_struct *task)
+{
+ return task->mempolicy;
+}
+#else
+static inline bool task_has_mempolicy(struct task_struct *task)
+{
+ return false;
+}
+#endif
+
+
/* bits in struct cpuset flags field */
typedef enum {
CS_CPU_EXCLUSIVE,
@@ -949,7 +962,7 @@ static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from,
static void cpuset_change_task_nodemask(struct task_struct *tsk,
nodemask_t *newmems)
{
- bool masks_disjoint = !nodes_intersects(*newmems, tsk->mems_allowed);
+ bool need_loop;
repeat:
/*
@@ -962,6 +975,14 @@ repeat:
return;
task_lock(tsk);
+ /*
+ * Determine if a loop is necessary if another thread is doing
+ * get_mems_allowed(). If at least one node remains unchanged and
+ * tsk does not have a mempolicy, then an empty nodemask will not be
+ * possible when mems_allowed is larger than a word.
+ */
+ need_loop = task_has_mempolicy(tsk) ||
+ !nodes_intersects(*newmems, tsk->mems_allowed);
nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems);
mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP1);
@@ -981,11 +1002,9 @@ repeat:
/*
* Allocation of memory is very fast, we needn't sleep when waiting
- * for the read-side. No wait is necessary, however, if at least one
- * node remains unchanged.
+ * for the read-side.
*/
- while (masks_disjoint &&
- ACCESS_ONCE(tsk->mems_allowed_change_disable)) {
+ while (need_loop && ACCESS_ONCE(tsk->mems_allowed_change_disable)) {
task_unlock(tsk);
if (!task_curr(tsk))
yield();
diff --git a/kernel/events/core.c b/kernel/events/core.c
index d3b9df5962c..58690af323e 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3558,9 +3558,13 @@ static void ring_buffer_wakeup(struct perf_event *event)
rcu_read_lock();
rb = rcu_dereference(event->rb);
- list_for_each_entry_rcu(event, &rb->event_list, rb_entry) {
+ if (!rb)
+ goto unlock;
+
+ list_for_each_entry_rcu(event, &rb->event_list, rb_entry)
wake_up_all(&event->waitq);
- }
+
+unlock:
rcu_read_unlock();
}
diff --git a/kernel/futex.c b/kernel/futex.c
index ea87f4d2f45..1614be20173 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -314,17 +314,29 @@ again:
#endif
lock_page(page_head);
+
+ /*
+ * If page_head->mapping is NULL, then it cannot be a PageAnon
+ * page; but it might be the ZERO_PAGE or in the gate area or
+ * in a special mapping (all cases which we are happy to fail);
+ * or it may have been a good file page when get_user_pages_fast
+ * found it, but truncated or holepunched or subjected to
+ * invalidate_complete_page2 before we got the page lock (also
+ * cases which we are happy to fail). And we hold a reference,
+ * so refcount care in invalidate_complete_page's remove_mapping
+ * prevents drop_caches from setting mapping to NULL beneath us.
+ *
+ * The case we do have to guard against is when memory pressure made
+ * shmem_writepage move it from filecache to swapcache beneath us:
+ * an unlikely race, but we do need to retry for page_head->mapping.
+ */
if (!page_head->mapping) {
+ int shmem_swizzled = PageSwapCache(page_head);
unlock_page(page_head);
put_page(page_head);
- /*
- * ZERO_PAGE pages don't have a mapping. Avoid a busy loop
- * trying to find one. RW mapping would have COW'd (and thus
- * have a mapping) so this page is RO and won't ever change.
- */
- if ((page_head == ZERO_PAGE(address)))
- return -EFAULT;
- goto again;
+ if (shmem_swizzled)
+ goto again;
+ return -EFAULT;
}
/*
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 200ce832c58..7ca523b249e 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -143,11 +143,6 @@ int irq_domain_simple_dt_translate(struct irq_domain *d,
return 0;
}
-struct irq_domain_ops irq_domain_simple_ops = {
- .dt_translate = irq_domain_simple_dt_translate,
-};
-EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
-
/**
* irq_domain_create_simple() - Set up a 'simple' translation range
*/
@@ -182,3 +177,10 @@ void irq_domain_generate_simple(const struct of_device_id *match,
}
EXPORT_SYMBOL_GPL(irq_domain_generate_simple);
#endif /* CONFIG_OF_IRQ */
+
+struct irq_domain_ops irq_domain_simple_ops = {
+#ifdef CONFIG_OF_IRQ
+ .dt_translate = irq_domain_simple_dt_translate,
+#endif /* CONFIG_OF_IRQ */
+};
+EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index a78ed2736ba..8a39fa3e3c6 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -2352,13 +2352,11 @@ again:
if (!smt && (sd->flags & SD_SHARE_CPUPOWER))
continue;
- if (!(sd->flags & SD_SHARE_PKG_RESOURCES)) {
- if (!smt) {
- smt = 1;
- goto again;
- }
+ if (smt && !(sd->flags & SD_SHARE_CPUPOWER))
+ break;
+
+ if (!(sd->flags & SD_SHARE_PKG_RESOURCES))
break;
- }
sg = sd->groups;
do {
@@ -2378,6 +2376,10 @@ next:
sg = sg->next;
} while (sg != sd->groups);
}
+ if (!smt) {
+ smt = 1;
+ goto again;
+ }
done:
rcu_read_unlock();
diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c
index 6318b511afa..a650694883a 100644
--- a/kernel/sysctl_binary.c
+++ b/kernel/sysctl_binary.c
@@ -1354,7 +1354,7 @@ static ssize_t binary_sysctl(const int *name, int nlen,
fput(file);
out_putname:
- putname(pathname);
+ __putname(pathname);
out:
return result;
}
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index c4eb71c8b2e..1ecd6ba36d6 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -387,7 +387,6 @@ void clockevents_exchange_device(struct clock_event_device *old,
* released list and do a notify add later.
*/
if (old) {
- old->event_handler = clockevents_handle_noop;
clockevents_set_mode(old, CLOCK_EVT_MODE_UNUSED);
list_del(&old->list);
list_add(&old->list, &clockevents_released);
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index da2f760e780..d3ad022136e 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -647,7 +647,7 @@ static void clocksource_enqueue(struct clocksource *cs)
/**
* __clocksource_updatefreq_scale - Used update clocksource with new freq
- * @t: clocksource to be registered
+ * @cs: clocksource to be registered
* @scale: Scale factor multiplied against freq to get clocksource hz
* @freq: clocksource frequency (cycles per second) divided by scale
*
@@ -699,7 +699,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
/**
* __clocksource_register_scale - Used to install new clocksources
- * @t: clocksource to be registered
+ * @cs: clocksource to be registered
* @scale: Scale factor multiplied against freq to get clocksource hz
* @freq: clocksource frequency (cycles per second) divided by scale
*
@@ -727,7 +727,7 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale);
/**
* clocksource_register - Used to install new clocksources
- * @t: clocksource to be registered
+ * @cs: clocksource to be registered
*
* Returns -EBUSY if registration fails, zero otherwise.
*/
@@ -761,6 +761,8 @@ static void __clocksource_change_rating(struct clocksource *cs, int rating)
/**
* clocksource_change_rating - Change the rating of a registered clocksource
+ * @cs: clocksource to be changed
+ * @rating: new rating
*/
void clocksource_change_rating(struct clocksource *cs, int rating)
{
@@ -772,6 +774,7 @@ EXPORT_SYMBOL(clocksource_change_rating);
/**
* clocksource_unregister - remove a registered clocksource
+ * @cs: clocksource to be unregistered
*/
void clocksource_unregister(struct clocksource *cs)
{
@@ -787,6 +790,7 @@ EXPORT_SYMBOL(clocksource_unregister);
/**
* sysfs_show_current_clocksources - sysfs interface for current clocksource
* @dev: unused
+ * @attr: unused
* @buf: char buffer to be filled with clocksource list
*
* Provides sysfs interface for listing current clocksource.
@@ -807,6 +811,7 @@ sysfs_show_current_clocksources(struct sys_device *dev,
/**
* sysfs_override_clocksource - interface for manually overriding clocksource
* @dev: unused
+ * @attr: unused
* @buf: name of override clocksource
* @count: length of buffer
*
@@ -842,6 +847,7 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
/**
* sysfs_show_available_clocksources - sysfs interface for listing clocksource
* @dev: unused
+ * @attr: unused
* @buf: char buffer to be filled with clocksource list
*
* Provides sysfs interface for listing registered clocksources
diff --git a/mm/filemap.c b/mm/filemap.c
index c106d3b3cc6..5f0a3c91fda 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1828,7 +1828,7 @@ repeat:
page = __page_cache_alloc(gfp | __GFP_COLD);
if (!page)
return ERR_PTR(-ENOMEM);
- err = add_to_page_cache_lru(page, mapping, index, GFP_KERNEL);
+ err = add_to_page_cache_lru(page, mapping, index, gfp);
if (unlikely(err)) {
page_cache_release(page);
if (err == -EEXIST)
@@ -1925,10 +1925,7 @@ static struct page *wait_on_page_read(struct page *page)
* @gfp: the page allocator flags to use if allocating
*
* This is the same as "read_mapping_page(mapping, index, NULL)", but with
- * any new page allocations done using the specified allocation flags. Note
- * that the Radix tree operations will still use GFP_KERNEL, so you can't
- * expect to do this atomically or anything like that - but you can pass in
- * other page requirements.
+ * any new page allocations done using the specified allocation flags.
*
* If the page does not get brought uptodate, return -EIO.
*/
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 73f17c0293c..2316840b337 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -901,7 +901,6 @@ retry:
h->resv_huge_pages += delta;
ret = 0;
- spin_unlock(&hugetlb_lock);
/* Free the needed pages to the hugetlb pool */
list_for_each_entry_safe(page, tmp, &surplus_list, lru) {
if ((--needed) < 0)
@@ -915,6 +914,7 @@ retry:
VM_BUG_ON(page_count(page));
enqueue_huge_page(h, page);
}
+ spin_unlock(&hugetlb_lock);
/* Free unnecessary surplus pages to the buddy allocator */
free:
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 6aff93c98ac..b63f5f7dfa0 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -4907,9 +4907,9 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
int cpu;
enable_swap_cgroup();
parent = NULL;
- root_mem_cgroup = memcg;
if (mem_cgroup_soft_limit_tree_init())
goto free_out;
+ root_mem_cgroup = memcg;
for_each_possible_cpu(cpu) {
struct memcg_stock_pcp *stock =
&per_cpu(memcg_stock, cpu);
@@ -4948,7 +4948,6 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
return &memcg->css;
free_out:
__mem_cgroup_free(memcg);
- root_mem_cgroup = NULL;
return ERR_PTR(error);
}
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index adc39548181..c3fdbcb1765 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -636,6 +636,7 @@ static int mbind_range(struct mm_struct *mm, unsigned long start,
struct vm_area_struct *prev;
struct vm_area_struct *vma;
int err = 0;
+ pgoff_t pgoff;
unsigned long vmstart;
unsigned long vmend;
@@ -643,13 +644,21 @@ static int mbind_range(struct mm_struct *mm, unsigned long start,
if (!vma || vma->vm_start > start)
return -EFAULT;
+ if (start > vma->vm_start)
+ prev = vma;
+
for (; vma && vma->vm_start < end; prev = vma, vma = next) {
next = vma->vm_next;
vmstart = max(start, vma->vm_start);
vmend = min(end, vma->vm_end);
+ if (mpol_equal(vma_policy(vma), new_pol))
+ continue;
+
+ pgoff = vma->vm_pgoff +
+ ((vmstart - vma->vm_start) >> PAGE_SHIFT);
prev = vma_merge(mm, prev, vmstart, vmend, vma->vm_flags,
- vma->anon_vma, vma->vm_file, vma->vm_pgoff,
+ vma->anon_vma, vma->vm_file, pgoff,
new_pol);
if (prev) {
vma = prev;
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 76f2c5ae908..069b64e521f 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -176,7 +176,7 @@ static bool oom_unkillable_task(struct task_struct *p,
unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *mem,
const nodemask_t *nodemask, unsigned long totalpages)
{
- int points;
+ long points;
if (oom_unkillable_task(p, mem, nodemask))
return 0;
diff --git a/mm/percpu.c b/mm/percpu.c
index 3bb810a7200..716eb4acf2f 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1023,9 +1023,11 @@ phys_addr_t per_cpu_ptr_to_phys(void *addr)
if (!is_vmalloc_addr(addr))
return __pa(addr);
else
- return page_to_phys(vmalloc_to_page(addr));
+ return page_to_phys(vmalloc_to_page(addr)) +
+ offset_in_page(addr);
} else
- return page_to_phys(pcpu_addr_to_page(addr));
+ return page_to_phys(pcpu_addr_to_page(addr)) +
+ offset_in_page(addr);
}
/**
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index f87577042a8..21fdf46ad5a 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1315,7 +1315,7 @@ static struct vm_struct *__get_vm_area_node(unsigned long size,
unsigned long align, unsigned long flags, unsigned long start,
unsigned long end, int node, gfp_t gfp_mask, void *caller)
{
- static struct vmap_area *va;
+ struct vmap_area *va;
struct vm_struct *area;
BUG_ON(in_interrupt());
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index e0af7237cd9..c1c597e3e19 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -673,7 +673,7 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
goto encrypt;
auth:
- if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+ if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
return 0;
if (!hci_conn_auth(conn, sec_level, auth_type))
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 5ea94a1eecf..17b5b1cd965 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2152,7 +2152,7 @@ static int l2cap_parse_conf_rsp(struct l2cap_chan *chan, void *rsp, int len, voi
void *ptr = req->data;
int type, olen;
unsigned long val;
- struct l2cap_conf_rfc rfc;
+ struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC };
BT_DBG("chan %p, rsp %p, len %d, req %p", chan, rsp, len, data);
@@ -2271,6 +2271,16 @@ static void l2cap_conf_rfc_get(struct l2cap_chan *chan, void *rsp, int len)
}
}
+ /* Use sane default values in case a misbehaving remote device
+ * did not send an RFC option.
+ */
+ rfc.mode = chan->mode;
+ rfc.retrans_timeout = cpu_to_le16(L2CAP_DEFAULT_RETRANS_TO);
+ rfc.monitor_timeout = cpu_to_le16(L2CAP_DEFAULT_MONITOR_TO);
+ rfc.max_pdu_size = cpu_to_le16(chan->imtu);
+
+ BT_ERR("Expected RFC option was not found, using defaults");
+
done:
switch (rfc.mode) {
case L2CAP_MODE_ERTM:
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 4e32e18211f..2d28dfe9838 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -1146,6 +1146,7 @@ static int rfcomm_recv_ua(struct rfcomm_session *s, u8 dlci)
if (list_empty(&s->dlcs)) {
s->state = BT_DISCONN;
rfcomm_send_disc(s, 0);
+ rfcomm_session_clear_timer(s);
}
break;
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index d6ec3720c77..fa8b8f76358 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -114,12 +114,18 @@ static struct neighbour *fake_neigh_lookup(const struct dst_entry *dst, const vo
return NULL;
}
+static unsigned int fake_mtu(const struct dst_entry *dst)
+{
+ return dst->dev->mtu;
+}
+
static struct dst_ops fake_dst_ops = {
.family = AF_INET,
.protocol = cpu_to_be16(ETH_P_IP),
.update_pmtu = fake_update_pmtu,
.cow_metrics = fake_cow_metrics,
.neigh_lookup = fake_neigh_lookup,
+ .mtu = fake_mtu,
};
/*
@@ -141,7 +147,7 @@ void br_netfilter_rtable_init(struct net_bridge *br)
rt->dst.dev = br->dev;
rt->dst.path = &rt->dst;
dst_init_metrics(&rt->dst, br_dst_default_metrics, true);
- rt->dst.flags = DST_NOXFRM;
+ rt->dst.flags = DST_NOXFRM | DST_NOPEER;
rt->dst.ops = &fake_dst_ops;
}
diff --git a/net/core/flow.c b/net/core/flow.c
index 8ae42de9c79..e318c7e9804 100644
--- a/net/core/flow.c
+++ b/net/core/flow.c
@@ -358,6 +358,18 @@ void flow_cache_flush(void)
put_online_cpus();
}
+static void flow_cache_flush_task(struct work_struct *work)
+{
+ flow_cache_flush();
+}
+
+static DECLARE_WORK(flow_cache_flush_work, flow_cache_flush_task);
+
+void flow_cache_flush_deferred(void)
+{
+ schedule_work(&flow_cache_flush_work);
+}
+
static int __cpuinit flow_cache_cpu_prepare(struct flow_cache *fc, int cpu)
{
struct flow_cache_percpu *fcp = per_cpu_ptr(fc->percpu, cpu);
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index c71c434a4c0..385aefe5364 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -665,11 +665,14 @@ static ssize_t store_rps_dev_flow_table_cnt(struct netdev_rx_queue *queue,
if (count) {
int i;
- if (count > 1<<30) {
+ if (count > INT_MAX)
+ return -EINVAL;
+ count = roundup_pow_of_two(count);
+ if (count > (ULONG_MAX - sizeof(struct rps_dev_flow_table))
+ / sizeof(struct rps_dev_flow)) {
/* Enforce a limit to prevent overflow */
return -EINVAL;
}
- count = roundup_pow_of_two(count);
table = vmalloc(RPS_DEV_FLOW_TABLE_SIZE(count));
if (!table)
return -ENOMEM;
diff --git a/net/core/sock.c b/net/core/sock.c
index 4ed7b1d12f5..b23f174ab84 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -288,11 +288,7 @@ int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
unsigned long flags;
struct sk_buff_head *list = &sk->sk_receive_queue;
- /* Cast sk->rcvbuf to unsigned... It's pointless, but reduces
- number of warnings when compiling with -W --ANK
- */
- if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
- (unsigned)sk->sk_rcvbuf) {
+ if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf) {
atomic_inc(&sk->sk_drops);
trace_sock_rcvqueue_full(sk, skb);
return -ENOMEM;
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 0da2afc97f3..99ec116bef1 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -253,6 +253,10 @@ static int __init ic_open_devs(void)
}
}
+ /* no point in waiting if we could not bring up at least one device */
+ if (!ic_first_dev)
+ goto have_carrier;
+
/* wait for a carrier on at least one device */
start = jiffies;
while (jiffies - start < msecs_to_jiffies(CONF_CARRIER_TIMEOUT)) {
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 46af62363b8..94cdbc55ca7 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -91,6 +91,7 @@
#include <linux/rcupdate.h>
#include <linux/times.h>
#include <linux/slab.h>
+#include <linux/prefetch.h>
#include <net/dst.h>
#include <net/net_namespace.h>
#include <net/protocol.h>
@@ -120,6 +121,7 @@
static int ip_rt_max_size;
static int ip_rt_gc_timeout __read_mostly = RT_GC_TIMEOUT;
+static int ip_rt_gc_interval __read_mostly = 60 * HZ;
static int ip_rt_gc_min_interval __read_mostly = HZ / 2;
static int ip_rt_redirect_number __read_mostly = 9;
static int ip_rt_redirect_load __read_mostly = HZ / 50;
@@ -133,6 +135,9 @@ static int ip_rt_min_advmss __read_mostly = 256;
static int rt_chain_length_max __read_mostly = 20;
static int redirect_genid;
+static struct delayed_work expires_work;
+static unsigned long expires_ljiffies;
+
/*
* Interface to generic destination cache.
*/
@@ -830,6 +835,97 @@ static int has_noalias(const struct rtable *head, const struct rtable *rth)
return ONE;
}
+static void rt_check_expire(void)
+{
+ static unsigned int rover;
+ unsigned int i = rover, goal;
+ struct rtable *rth;
+ struct rtable __rcu **rthp;
+ unsigned long samples = 0;
+ unsigned long sum = 0, sum2 = 0;
+ unsigned long delta;
+ u64 mult;
+
+ delta = jiffies - expires_ljiffies;
+ expires_ljiffies = jiffies;
+ mult = ((u64)delta) << rt_hash_log;
+ if (ip_rt_gc_timeout > 1)
+ do_div(mult, ip_rt_gc_timeout);
+ goal = (unsigned int)mult;
+ if (goal > rt_hash_mask)
+ goal = rt_hash_mask + 1;
+ for (; goal > 0; goal--) {
+ unsigned long tmo = ip_rt_gc_timeout;
+ unsigned long length;
+
+ i = (i + 1) & rt_hash_mask;
+ rthp = &rt_hash_table[i].chain;
+
+ if (need_resched())
+ cond_resched();
+
+ samples++;
+
+ if (rcu_dereference_raw(*rthp) == NULL)
+ continue;
+ length = 0;
+ spin_lock_bh(rt_hash_lock_addr(i));
+ while ((rth = rcu_dereference_protected(*rthp,
+ lockdep_is_held(rt_hash_lock_addr(i)))) != NULL) {
+ prefetch(rth->dst.rt_next);
+ if (rt_is_expired(rth)) {
+ *rthp = rth->dst.rt_next;
+ rt_free(rth);
+ continue;
+ }
+ if (rth->dst.expires) {
+ /* Entry is expired even if it is in use */
+ if (time_before_eq(jiffies, rth->dst.expires)) {
+nofree:
+ tmo >>= 1;
+ rthp = &rth->dst.rt_next;
+ /*
+ * We only count entries on
+ * a chain with equal hash inputs once
+ * so that entries for different QOS
+ * levels, and other non-hash input
+ * attributes don't unfairly skew
+ * the length computation
+ */
+ length += has_noalias(rt_hash_table[i].chain, rth);
+ continue;
+ }
+ } else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout))
+ goto nofree;
+
+ /* Cleanup aged off entries. */
+ *rthp = rth->dst.rt_next;
+ rt_free(rth);
+ }
+ spin_unlock_bh(rt_hash_lock_addr(i));
+ sum += length;
+ sum2 += length*length;
+ }
+ if (samples) {
+ unsigned long avg = sum / samples;
+ unsigned long sd = int_sqrt(sum2 / samples - avg*avg);
+ rt_chain_length_max = max_t(unsigned long,
+ ip_rt_gc_elasticity,
+ (avg + 4*sd) >> FRACT_BITS);
+ }
+ rover = i;
+}
+
+/*
+ * rt_worker_func() is run in process context.
+ * we call rt_check_expire() to scan part of the hash table
+ */
+static void rt_worker_func(struct work_struct *work)
+{
+ rt_check_expire();
+ schedule_delayed_work(&expires_work, ip_rt_gc_interval);
+}
+
/*
* Perturbation of rt_genid by a small quantity [1..256]
* Using 8 bits of shuffling ensure we can call rt_cache_invalidate()
@@ -1271,7 +1367,7 @@ void __ip_select_ident(struct iphdr *iph, struct dst_entry *dst, int more)
{
struct rtable *rt = (struct rtable *) dst;
- if (rt) {
+ if (rt && !(rt->dst.flags & DST_NOPEER)) {
if (rt->peer == NULL)
rt_bind_peer(rt, rt->rt_dst, 1);
@@ -1282,7 +1378,7 @@ void __ip_select_ident(struct iphdr *iph, struct dst_entry *dst, int more)
iph->id = htons(inet_getid(rt->peer, more));
return;
}
- } else
+ } else if (!rt)
printk(KERN_DEBUG "rt_bind_peer(0) @%p\n",
__builtin_return_address(0));
@@ -3179,6 +3275,13 @@ static ctl_table ipv4_route_table[] = {
.proc_handler = proc_dointvec_jiffies,
},
{
+ .procname = "gc_interval",
+ .data = &ip_rt_gc_interval,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_dointvec_jiffies,
+ },
+ {
.procname = "redirect_load",
.data = &ip_rt_redirect_load,
.maxlen = sizeof(int),
@@ -3388,6 +3491,11 @@ int __init ip_rt_init(void)
devinet_init();
ip_fib_init();
+ INIT_DELAYED_WORK_DEFERRABLE(&expires_work, rt_worker_func);
+ expires_ljiffies = jiffies;
+ schedule_delayed_work(&expires_work,
+ net_random() % ip_rt_gc_interval + ip_rt_gc_interval);
+
if (ip_rt_proc_init())
printk(KERN_ERR "Unable to create route proc files\n");
#ifdef CONFIG_XFRM
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 84d0bd5cac9..ec562713db9 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -603,7 +603,7 @@ void ipv6_select_ident(struct frag_hdr *fhdr, struct rt6_info *rt)
static atomic_t ipv6_fragmentation_id;
int old, new;
- if (rt) {
+ if (rt && !(rt->dst.flags & DST_NOPEER)) {
struct inet_peer *peer;
if (!rt->rt6i_peer)
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index dfd3a648a55..a18e6c3d36e 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -833,15 +833,15 @@ static int llc_ui_recvmsg(struct kiocb *iocb, struct socket *sock,
copied += used;
len -= used;
+ /* For non stream protcols we get one packet per recvmsg call */
+ if (sk->sk_type != SOCK_STREAM)
+ goto copy_uaddr;
+
if (!(flags & MSG_PEEK)) {
sk_eat_skb(sk, skb, 0);
*seq = 0;
}
- /* For non stream protcols we get one packet per recvmsg call */
- if (sk->sk_type != SOCK_STREAM)
- goto copy_uaddr;
-
/* Partial read */
if (used + offset < skb->len)
continue;
@@ -857,6 +857,12 @@ copy_uaddr:
}
if (llc_sk(sk)->cmsg_flags)
llc_cmsg_rcv(msg, skb);
+
+ if (!(flags & MSG_PEEK)) {
+ sk_eat_skb(sk, skb, 0);
+ *seq = 0;
+ }
+
goto out;
}
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index 12571fb2881..29fa5badde7 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -616,7 +616,7 @@ struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp)
if ((cp) && (!cp->dest)) {
dest = ip_vs_find_dest(ip_vs_conn_net(cp), cp->af, &cp->daddr,
cp->dport, &cp->vaddr, cp->vport,
- cp->protocol, cp->fwmark);
+ cp->protocol, cp->fwmark, cp->flags);
ip_vs_bind_dest(cp, dest);
return dest;
} else
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 008bf97cc91..e1a66cf37f9 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -619,15 +619,21 @@ struct ip_vs_dest *ip_vs_find_dest(struct net *net, int af,
const union nf_inet_addr *daddr,
__be16 dport,
const union nf_inet_addr *vaddr,
- __be16 vport, __u16 protocol, __u32 fwmark)
+ __be16 vport, __u16 protocol, __u32 fwmark,
+ __u32 flags)
{
struct ip_vs_dest *dest;
struct ip_vs_service *svc;
+ __be16 port = dport;
svc = ip_vs_service_get(net, af, fwmark, protocol, vaddr, vport);
if (!svc)
return NULL;
- dest = ip_vs_lookup_dest(svc, daddr, dport);
+ if (fwmark && (flags & IP_VS_CONN_F_FWD_MASK) != IP_VS_CONN_F_MASQ)
+ port = 0;
+ dest = ip_vs_lookup_dest(svc, daddr, port);
+ if (!dest)
+ dest = ip_vs_lookup_dest(svc, daddr, port ^ dport);
if (dest)
atomic_inc(&dest->refcnt);
ip_vs_service_put(svc);
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 3cdd479f9b5..2b6678c0ce1 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -740,7 +740,7 @@ static void ip_vs_proc_conn(struct net *net, struct ip_vs_conn_param *param,
* but still handled.
*/
dest = ip_vs_find_dest(net, type, daddr, dport, param->vaddr,
- param->vport, protocol, fwmark);
+ param->vport, protocol, fwmark, flags);
/* Set the approprite ativity flag */
if (protocol == IPPROTO_TCP) {
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index ef21b221f03..257e77256c5 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -135,7 +135,7 @@ nla_put_failure:
static inline int
ctnetlink_dump_timeout(struct sk_buff *skb, const struct nf_conn *ct)
{
- long timeout = (ct->timeout.expires - jiffies) / HZ;
+ long timeout = ((long)ct->timeout.expires - (long)jiffies) / HZ;
if (timeout < 0)
timeout = 0;
@@ -1358,12 +1358,15 @@ ctnetlink_create_conntrack(struct net *net, u16 zone,
nf_ct_protonum(ct));
if (helper == NULL) {
rcu_read_unlock();
+ spin_unlock_bh(&nf_conntrack_lock);
#ifdef CONFIG_MODULES
if (request_module("nfct-helper-%s", helpname) < 0) {
+ spin_lock_bh(&nf_conntrack_lock);
err = -EOPNOTSUPP;
goto err1;
}
+ spin_lock_bh(&nf_conntrack_lock);
rcu_read_lock();
helper = __nf_conntrack_helper_find(helpname,
nf_ct_l3num(ct),
@@ -1638,7 +1641,7 @@ ctnetlink_exp_dump_expect(struct sk_buff *skb,
const struct nf_conntrack_expect *exp)
{
struct nf_conn *master = exp->master;
- long timeout = (exp->timeout.expires - jiffies) / HZ;
+ long timeout = ((long)exp->timeout.expires - (long)jiffies) / HZ;
struct nf_conn_help *help;
if (timeout < 0)
@@ -1869,25 +1872,30 @@ ctnetlink_get_expect(struct sock *ctnl, struct sk_buff *skb,
err = -ENOMEM;
skb2 = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
- if (skb2 == NULL)
+ if (skb2 == NULL) {
+ nf_ct_expect_put(exp);
goto out;
+ }
rcu_read_lock();
err = ctnetlink_exp_fill_info(skb2, NETLINK_CB(skb).pid,
nlh->nlmsg_seq, IPCTNL_MSG_EXP_NEW, exp);
rcu_read_unlock();
+ nf_ct_expect_put(exp);
if (err <= 0)
goto free;
- nf_ct_expect_put(exp);
+ err = netlink_unicast(ctnl, skb2, NETLINK_CB(skb).pid, MSG_DONTWAIT);
+ if (err < 0)
+ goto out;
- return netlink_unicast(ctnl, skb2, NETLINK_CB(skb).pid, MSG_DONTWAIT);
+ return 0;
free:
kfree_skb(skb2);
out:
- nf_ct_expect_put(exp);
- return err;
+ /* this avoids a loop in nfnetlink. */
+ return err == -EAGAIN ? -ENOBUFS : err;
}
static int
diff --git a/net/netfilter/xt_connbytes.c b/net/netfilter/xt_connbytes.c
index 5b138506690..9ddf1c3bfb3 100644
--- a/net/netfilter/xt_connbytes.c
+++ b/net/netfilter/xt_connbytes.c
@@ -87,10 +87,10 @@ connbytes_mt(const struct sk_buff *skb, struct xt_action_param *par)
break;
}
- if (sinfo->count.to)
+ if (sinfo->count.to >= sinfo->count.from)
return what <= sinfo->count.to && what >= sinfo->count.from;
- else
- return what >= sinfo->count.from;
+ else /* inverted */
+ return what < sinfo->count.to || what > sinfo->count.from;
}
static int connbytes_mt_check(const struct xt_mtchk_param *par)
diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
index 3925c657876..ea66034499c 100644
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -69,7 +69,7 @@ static int __nci_request(struct nci_dev *ndev,
__u32 timeout)
{
int rc = 0;
- unsigned long completion_rc;
+ long completion_rc;
ndev->req_status = NCI_REQ_PEND;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 82a6f34d39d..d9d4970b9b0 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1630,8 +1630,7 @@ static int packet_rcv(struct sk_buff *skb, struct net_device *dev,
if (snaplen > res)
snaplen = res;
- if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
- (unsigned)sk->sk_rcvbuf)
+ if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf)
goto drop_n_acct;
if (skb_shared(skb)) {
@@ -1762,8 +1761,7 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev,
if (po->tp_version <= TPACKET_V2) {
if (macoff + snaplen > po->rx_ring.frame_size) {
if (po->copy_thresh &&
- atomic_read(&sk->sk_rmem_alloc) + skb->truesize
- < (unsigned)sk->sk_rcvbuf) {
+ atomic_read(&sk->sk_rmem_alloc) < sk->sk_rcvbuf) {
if (skb_shared(skb)) {
copy_skb = skb_clone(skb, GFP_ATOMIC);
} else {
@@ -2450,8 +2448,12 @@ static int packet_do_bind(struct sock *sk, struct net_device *dev, __be16 protoc
{
struct packet_sock *po = pkt_sk(sk);
- if (po->fanout)
+ if (po->fanout) {
+ if (dev)
+ dev_put(dev);
+
return -EINVAL;
+ }
lock_sock(sk);
diff --git a/net/sched/sch_mqprio.c b/net/sched/sch_mqprio.c
index f88256cbacb..28de4309233 100644
--- a/net/sched/sch_mqprio.c
+++ b/net/sched/sch_mqprio.c
@@ -107,7 +107,7 @@ static int mqprio_init(struct Qdisc *sch, struct nlattr *opt)
if (!netif_is_multiqueue(dev))
return -EOPNOTSUPP;
- if (nla_len(opt) < sizeof(*qopt))
+ if (!opt || nla_len(opt) < sizeof(*qopt))
return -EINVAL;
qopt = nla_data(opt);
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index eb3b9a86c6e..a4ab207cdc5 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -488,7 +488,7 @@ static int get_dist_table(struct Qdisc *sch, const struct nlattr *attr)
return -EINVAL;
s = sizeof(struct disttable) + n * sizeof(s16);
- d = kmalloc(s, GFP_KERNEL);
+ d = kmalloc(s, GFP_KERNEL | __GFP_NOWARN);
if (!d)
d = vmalloc(s);
if (!d)
@@ -501,9 +501,10 @@ static int get_dist_table(struct Qdisc *sch, const struct nlattr *attr)
root_lock = qdisc_root_sleeping_lock(sch);
spin_lock_bh(root_lock);
- dist_free(q->delay_dist);
- q->delay_dist = d;
+ swap(q->delay_dist, d);
spin_unlock_bh(root_lock);
+
+ dist_free(d);
return 0;
}
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 152b5b3c3ff..acd2edbc073 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -173,7 +173,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a
asoc->timeouts[SCTP_EVENT_TIMEOUT_HEARTBEAT] = 0;
asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = asoc->sackdelay;
asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] =
- (unsigned long)sp->autoclose * HZ;
+ min_t(unsigned long, sp->autoclose, sctp_max_autoclose) * HZ;
/* Initializes the timers */
for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i)
diff --git a/net/sctp/output.c b/net/sctp/output.c
index 08b3cead650..817174eb5f4 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -697,13 +697,7 @@ static void sctp_packet_append_data(struct sctp_packet *packet,
/* Keep track of how many bytes are in flight to the receiver. */
asoc->outqueue.outstanding_bytes += datasize;
- /* Update our view of the receiver's rwnd. Include sk_buff overhead
- * while updating peer.rwnd so that it reduces the chances of a
- * receiver running out of receive buffer space even when receive
- * window is still open. This can happen when a sender is sending
- * sending small messages.
- */
- datasize += sizeof(struct sk_buff);
+ /* Update our view of the receiver's rwnd. */
if (datasize < rwnd)
rwnd -= datasize;
else
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 14c2b06028f..cfeb1d4a1ee 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -411,8 +411,7 @@ void sctp_retransmit_mark(struct sctp_outq *q,
chunk->transport->flight_size -=
sctp_data_size(chunk);
q->outstanding_bytes -= sctp_data_size(chunk);
- q->asoc->peer.rwnd += (sctp_data_size(chunk) +
- sizeof(struct sk_buff));
+ q->asoc->peer.rwnd += sctp_data_size(chunk);
}
continue;
}
@@ -432,8 +431,7 @@ void sctp_retransmit_mark(struct sctp_outq *q,
* (Section 7.2.4)), add the data size of those
* chunks to the rwnd.
*/
- q->asoc->peer.rwnd += (sctp_data_size(chunk) +
- sizeof(struct sk_buff));
+ q->asoc->peer.rwnd += sctp_data_size(chunk);
q->outstanding_bytes -= sctp_data_size(chunk);
if (chunk->transport)
transport->flight_size -= sctp_data_size(chunk);
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 61b9fca5a17..6f6ad868683 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1285,6 +1285,9 @@ SCTP_STATIC __init int sctp_init(void)
sctp_max_instreams = SCTP_DEFAULT_INSTREAMS;
sctp_max_outstreams = SCTP_DEFAULT_OUTSTREAMS;
+ /* Initialize maximum autoclose timeout. */
+ sctp_max_autoclose = INT_MAX / HZ;
+
/* Initialize handle used for association ids. */
idr_init(&sctp_assocs_id);
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 13bf5fcdbff..54a7cd2fdd7 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -2200,8 +2200,6 @@ static int sctp_setsockopt_autoclose(struct sock *sk, char __user *optval,
return -EINVAL;
if (copy_from_user(&sp->autoclose, optval, optlen))
return -EFAULT;
- /* make sure it won't exceed MAX_SCHEDULE_TIMEOUT */
- sp->autoclose = min_t(long, sp->autoclose, MAX_SCHEDULE_TIMEOUT / HZ);
return 0;
}
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index 6b3952961b8..60ffbd067ff 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -53,6 +53,10 @@ static int sack_timer_min = 1;
static int sack_timer_max = 500;
static int addr_scope_max = 3; /* check sctp_scope_policy_t in include/net/sctp/constants.h for max entries */
static int rwnd_scale_max = 16;
+static unsigned long max_autoclose_min = 0;
+static unsigned long max_autoclose_max =
+ (MAX_SCHEDULE_TIMEOUT / HZ > UINT_MAX)
+ ? UINT_MAX : MAX_SCHEDULE_TIMEOUT / HZ;
extern long sysctl_sctp_mem[3];
extern int sysctl_sctp_rmem[3];
@@ -258,6 +262,15 @@ static ctl_table sctp_table[] = {
.extra1 = &one,
.extra2 = &rwnd_scale_max,
},
+ {
+ .procname = "max_autoclose",
+ .data = &sctp_max_autoclose,
+ .maxlen = sizeof(unsigned long),
+ .mode = 0644,
+ .proc_handler = &proc_doulongvec_minmax,
+ .extra1 = &max_autoclose_min,
+ .extra2 = &max_autoclose_max,
+ },
{ /* sentinel */ }
};
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index d12ffa54581..00a1a2acd58 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -590,6 +590,27 @@ void rpc_prepare_task(struct rpc_task *task)
task->tk_ops->rpc_call_prepare(task, task->tk_calldata);
}
+static void
+rpc_init_task_statistics(struct rpc_task *task)
+{
+ /* Initialize retry counters */
+ task->tk_garb_retry = 2;
+ task->tk_cred_retry = 2;
+ task->tk_rebind_retry = 2;
+
+ /* starting timestamp */
+ task->tk_start = ktime_get();
+}
+
+static void
+rpc_reset_task_statistics(struct rpc_task *task)
+{
+ task->tk_timeouts = 0;
+ task->tk_flags &= ~(RPC_CALL_MAJORSEEN|RPC_TASK_KILLED|RPC_TASK_SENT);
+
+ rpc_init_task_statistics(task);
+}
+
/*
* Helper that calls task->tk_ops->rpc_call_done if it exists
*/
@@ -602,6 +623,7 @@ void rpc_exit_task(struct rpc_task *task)
WARN_ON(RPC_ASSASSINATED(task));
/* Always release the RPC slot and buffer memory */
xprt_release(task);
+ rpc_reset_task_statistics(task);
}
}
}
@@ -804,11 +826,6 @@ static void rpc_init_task(struct rpc_task *task, const struct rpc_task_setup *ta
task->tk_calldata = task_setup_data->callback_data;
INIT_LIST_HEAD(&task->tk_task);
- /* Initialize retry counters */
- task->tk_garb_retry = 2;
- task->tk_cred_retry = 2;
- task->tk_rebind_retry = 2;
-
task->tk_priority = task_setup_data->priority - RPC_PRIORITY_LOW;
task->tk_owner = current->tgid;
@@ -818,8 +835,7 @@ static void rpc_init_task(struct rpc_task *task, const struct rpc_task_setup *ta
if (task->tk_ops->rpc_call_prepare != NULL)
task->tk_action = rpc_prepare_task;
- /* starting timestamp */
- task->tk_start = ktime_get();
+ rpc_init_task_statistics(task);
dprintk("RPC: new task initialized, procpid %u\n",
task_pid_nr(current));
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index f4385e45a5f..c64c0ef519b 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -995,13 +995,11 @@ out_init_req:
static void xprt_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req)
{
- if (xprt_dynamic_free_slot(xprt, req))
- return;
-
- memset(req, 0, sizeof(*req)); /* mark unused */
-
spin_lock(&xprt->reserve_lock);
- list_add(&req->rq_list, &xprt->free);
+ if (!xprt_dynamic_free_slot(xprt, req)) {
+ memset(req, 0, sizeof(*req)); /* mark unused */
+ list_add(&req->rq_list, &xprt->free);
+ }
rpc_wake_up_next(&xprt->backlog);
spin_unlock(&xprt->reserve_lock);
}
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 2118d644663..9049a5caeb2 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2276,8 +2276,6 @@ static void __xfrm_garbage_collect(struct net *net)
{
struct dst_entry *head, *next;
- flow_cache_flush();
-
spin_lock_bh(&xfrm_policy_sk_bundle_lock);
head = xfrm_policy_sk_bundles;
xfrm_policy_sk_bundles = NULL;
@@ -2290,6 +2288,18 @@ static void __xfrm_garbage_collect(struct net *net)
}
}
+static void xfrm_garbage_collect(struct net *net)
+{
+ flow_cache_flush();
+ __xfrm_garbage_collect(net);
+}
+
+static void xfrm_garbage_collect_deferred(struct net *net)
+{
+ flow_cache_flush_deferred();
+ __xfrm_garbage_collect(net);
+}
+
static void xfrm_init_pmtu(struct dst_entry *dst)
{
do {
@@ -2422,7 +2432,7 @@ int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo)
if (likely(dst_ops->neigh_lookup == NULL))
dst_ops->neigh_lookup = xfrm_neigh_lookup;
if (likely(afinfo->garbage_collect == NULL))
- afinfo->garbage_collect = __xfrm_garbage_collect;
+ afinfo->garbage_collect = xfrm_garbage_collect_deferred;
xfrm_policy_afinfo[afinfo->family] = afinfo;
}
write_unlock_bh(&xfrm_policy_afinfo_lock);
@@ -2516,7 +2526,7 @@ static int xfrm_dev_event(struct notifier_block *this, unsigned long event, void
switch (event) {
case NETDEV_DOWN:
- __xfrm_garbage_collect(dev_net(dev));
+ xfrm_garbage_collect(dev_net(dev));
}
return NOTIFY_DONE;
}
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index ba573fe7c74..914833d99b0 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -60,8 +60,8 @@ update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
--directory=$(srctree) --directory=$(objtree) \
--output $(obj)/config.pot
$(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
- $(Q)ln -fs Kconfig.x86 arch/um/Kconfig
- $(Q)(for i in `ls $(srctree)/arch/*/Kconfig`; \
+ $(Q)(for i in `ls $(srctree)/arch/*/Kconfig \
+ $(srctree)/arch/*/um/Kconfig`; \
do \
echo " GEN $$i"; \
$(obj)/kxgettext $$i \
@@ -69,7 +69,6 @@ update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
done )
$(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
--output $(obj)/linux.pot
- $(Q)rm -f $(srctree)/arch/um/Kconfig
$(Q)rm -f $(obj)/config.pot
PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig
diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c
index 5dd5b140242..8738deff26f 100644
--- a/security/integrity/evm/evm_crypto.c
+++ b/security/integrity/evm/evm_crypto.c
@@ -27,20 +27,35 @@ static int evmkey_len = MAX_KEY_SIZE;
struct crypto_shash *hmac_tfm;
+static DEFINE_MUTEX(mutex);
+
static struct shash_desc *init_desc(void)
{
int rc;
struct shash_desc *desc;
if (hmac_tfm == NULL) {
+ mutex_lock(&mutex);
+ if (hmac_tfm)
+ goto out;
hmac_tfm = crypto_alloc_shash(evm_hmac, 0, CRYPTO_ALG_ASYNC);
if (IS_ERR(hmac_tfm)) {
pr_err("Can not allocate %s (reason: %ld)\n",
evm_hmac, PTR_ERR(hmac_tfm));
rc = PTR_ERR(hmac_tfm);
hmac_tfm = NULL;
+ mutex_unlock(&mutex);
+ return ERR_PTR(rc);
+ }
+ rc = crypto_shash_setkey(hmac_tfm, evmkey, evmkey_len);
+ if (rc) {
+ crypto_free_shash(hmac_tfm);
+ hmac_tfm = NULL;
+ mutex_unlock(&mutex);
return ERR_PTR(rc);
}
+out:
+ mutex_unlock(&mutex);
}
desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(hmac_tfm),
@@ -51,11 +66,7 @@ static struct shash_desc *init_desc(void)
desc->tfm = hmac_tfm;
desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
- rc = crypto_shash_setkey(hmac_tfm, evmkey, evmkey_len);
- if (rc)
- goto out;
rc = crypto_shash_init(desc);
-out:
if (rc) {
kfree(desc);
return ERR_PTR(rc);
diff --git a/security/selinux/netport.c b/security/selinux/netport.c
index 0b62bd11246..7b9eb1faf68 100644
--- a/security/selinux/netport.c
+++ b/security/selinux/netport.c
@@ -123,7 +123,9 @@ static void sel_netport_insert(struct sel_netport *port)
if (sel_netport_hash[idx].size == SEL_NETPORT_HASH_BKT_LIMIT) {
struct sel_netport *tail;
tail = list_entry(
- rcu_dereference(sel_netport_hash[idx].list.prev),
+ rcu_dereference_protected(
+ sel_netport_hash[idx].list.prev,
+ lockdep_is_held(&sel_netport_lock)),
struct sel_netport, list);
list_del_rcu(&tail->list);
kfree_rcu(tail, rcu);
diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c
index 6e5addeb236..73516f69ac7 100644
--- a/sound/atmel/ac97c.c
+++ b/sound/atmel/ac97c.c
@@ -899,6 +899,10 @@ static void atmel_ac97c_reset(struct atmel_ac97c *chip)
/* AC97 v2.2 specifications says minimum 1 us. */
udelay(2);
gpio_set_value(chip->reset_pin, 1);
+ } else {
+ ac97c_writel(chip, MR, AC97C_MR_WRST | AC97C_MR_ENA);
+ udelay(2);
+ ac97c_writel(chip, MR, AC97C_MR_ENA);
}
}
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index bfdc52370ad..d3b0a20744f 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -235,6 +235,7 @@ static int wm8776_hw_params(struct snd_pcm_substream *substream,
switch (snd_pcm_format_width(params_format(params))) {
case 16:
iface = 0;
+ break;
case 20:
iface = 0x10;
break;
diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c
index 3ad0925d23a..758e3b36d4c 100644
--- a/virt/kvm/assigned-dev.c
+++ b/virt/kvm/assigned-dev.c
@@ -17,6 +17,8 @@
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
+#include <linux/namei.h>
+#include <linux/fs.h>
#include "irq.h"
static struct kvm_assigned_dev_kernel *kvm_find_assigned_dev(struct list_head *head,
@@ -480,12 +482,76 @@ out:
return r;
}
+/*
+ * We want to test whether the caller has been granted permissions to
+ * use this device. To be able to configure and control the device,
+ * the user needs access to PCI configuration space and BAR resources.
+ * These are accessed through PCI sysfs. PCI config space is often
+ * passed to the process calling this ioctl via file descriptor, so we
+ * can't rely on access to that file. We can check for permissions
+ * on each of the BAR resource files, which is a pretty clear
+ * indicator that the user has been granted access to the device.
+ */
+static int probe_sysfs_permissions(struct pci_dev *dev)
+{
+#ifdef CONFIG_SYSFS
+ int i;
+ bool bar_found = false;
+
+ for (i = PCI_STD_RESOURCES; i <= PCI_STD_RESOURCE_END; i++) {
+ char *kpath, *syspath;
+ struct path path;
+ struct inode *inode;
+ int r;
+
+ if (!pci_resource_len(dev, i))
+ continue;
+
+ kpath = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
+ if (!kpath)
+ return -ENOMEM;
+
+ /* Per sysfs-rules, sysfs is always at /sys */
+ syspath = kasprintf(GFP_KERNEL, "/sys%s/resource%d", kpath, i);
+ kfree(kpath);
+ if (!syspath)
+ return -ENOMEM;
+
+ r = kern_path(syspath, LOOKUP_FOLLOW, &path);
+ kfree(syspath);
+ if (r)
+ return r;
+
+ inode = path.dentry->d_inode;
+
+ r = inode_permission(inode, MAY_READ | MAY_WRITE | MAY_ACCESS);
+ path_put(&path);
+ if (r)
+ return r;
+
+ bar_found = true;
+ }
+
+ /* If no resources, probably something special */
+ if (!bar_found)
+ return -EPERM;
+
+ return 0;
+#else
+ return -EINVAL; /* No way to control the device without sysfs */
+#endif
+}
+
static int kvm_vm_ioctl_assign_device(struct kvm *kvm,
struct kvm_assigned_pci_dev *assigned_dev)
{
int r = 0, idx;
struct kvm_assigned_dev_kernel *match;
struct pci_dev *dev;
+ u8 header_type;
+
+ if (!(assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU))
+ return -EINVAL;
mutex_lock(&kvm->lock);
idx = srcu_read_lock(&kvm->srcu);
@@ -513,6 +579,18 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm,
r = -EINVAL;
goto out_free;
}
+
+ /* Don't allow bridges to be assigned */
+ pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+ if ((header_type & PCI_HEADER_TYPE) != PCI_HEADER_TYPE_NORMAL) {
+ r = -EPERM;
+ goto out_put;
+ }
+
+ r = probe_sysfs_permissions(dev);
+ if (r)
+ goto out_put;
+
if (pci_enable_device(dev)) {
printk(KERN_INFO "%s: Could not enable PCI device\n", __func__);
r = -EBUSY;
@@ -544,16 +622,14 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm,
list_add(&match->list, &kvm->arch.assigned_dev_head);
- if (assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU) {
- if (!kvm->arch.iommu_domain) {
- r = kvm_iommu_map_guest(kvm);
- if (r)
- goto out_list_del;
- }
- r = kvm_assign_device(kvm, match);
+ if (!kvm->arch.iommu_domain) {
+ r = kvm_iommu_map_guest(kvm);
if (r)
goto out_list_del;
}
+ r = kvm_assign_device(kvm, match);
+ if (r)
+ goto out_list_del;
out:
srcu_read_unlock(&kvm->srcu, idx);
@@ -593,8 +669,7 @@ static int kvm_vm_ioctl_deassign_device(struct kvm *kvm,
goto out;
}
- if (match->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU)
- kvm_deassign_device(kvm, match);
+ kvm_deassign_device(kvm, match);
kvm_free_assigned_device(kvm, match);