aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS8
-rw-r--r--drivers/net/wireless/Kconfig13
-rw-r--r--drivers/net/wireless/Makefile4
-rw-r--r--drivers/net/wireless/net2280.h452
-rw-r--r--drivers/net/wireless/p54.h80
-rw-r--r--drivers/net/wireless/p54common.c983
-rw-r--r--drivers/net/wireless/p54common.h329
-rw-r--r--drivers/net/wireless/p54pci.c691
-rw-r--r--drivers/net/wireless/p54pci.h106
-rw-r--r--drivers/net/wireless/p54usb.c906
-rw-r--r--drivers/net/wireless/p54usb.h133
11 files changed, 3705 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 6ae2b997526..c96505c2678 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3060,6 +3060,14 @@ L: kpreempt-tech@lists.sourceforge.net
W: ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
S: Supported
+P54 WIRELESS DRIVER
+P: Michael Wu
+M: flamingice@sourmilk.net
+L: linux-wireless@vger.kernel.org
+W: http://prism54.org
+T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
+S: Maintained
+
PRISM54 WIRELESS DRIVER
P: Luis R. Rodriguez
M: mcgrof@gmail.com
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index f481c757e22..5a6fdfd0f14 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -577,6 +577,19 @@ config ADM8211
Thanks to Infineon-ADMtek for their support of this driver.
+config P54_COMMON
+ tristate "Softmac Prism54 support"
+ depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL
+
+config P54_USB
+ tristate "Prism54 USB support"
+ depends on P54_COMMON && USB
+ select CRC32
+
+config P54_PCI
+ tristate "Prism54 PCI support"
+ depends on P54_COMMON && PCI
+
source "drivers/net/wireless/iwlwifi/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/bcm43xx/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index a7a15e3509e..6f32b53ee12 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -54,3 +54,7 @@ obj-$(CONFIG_ADM8211) += adm8211.o
obj-$(CONFIG_IWLWIFI) += iwlwifi/
obj-$(CONFIG_RT2X00) += rt2x00/
+
+obj-$(CONFIG_P54_COMMON) += p54common.o
+obj-$(CONFIG_P54_USB) += p54usb.o
+obj-$(CONFIG_P54_PCI) += p54pci.o
diff --git a/drivers/net/wireless/net2280.h b/drivers/net/wireless/net2280.h
new file mode 100644
index 00000000000..120eb831b28
--- /dev/null
+++ b/drivers/net/wireless/net2280.h
@@ -0,0 +1,452 @@
+#ifndef NET2280_H
+#define NET2280_H
+/*
+ * NetChip 2280 high/full speed USB device controller.
+ * Unlike many such controllers, this one talks PCI.
+ */
+
+/*
+ * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* NET2280 MEMORY MAPPED REGISTERS
+ *
+ * The register layout came from the chip documentation, and the bit
+ * number definitions were extracted from chip specification.
+ *
+ * Use the shift operator ('<<') to build bit masks, with readl/writel
+ * to access the registers through PCI.
+ */
+
+/* main registers, BAR0 + 0x0000 */
+struct net2280_regs {
+ // offset 0x0000
+ __le32 devinit;
+#define LOCAL_CLOCK_FREQUENCY 8
+#define FORCE_PCI_RESET 7
+#define PCI_ID 6
+#define PCI_ENABLE 5
+#define FIFO_SOFT_RESET 4
+#define CFG_SOFT_RESET 3
+#define PCI_SOFT_RESET 2
+#define USB_SOFT_RESET 1
+#define M8051_RESET 0
+ __le32 eectl;
+#define EEPROM_ADDRESS_WIDTH 23
+#define EEPROM_CHIP_SELECT_ACTIVE 22
+#define EEPROM_PRESENT 21
+#define EEPROM_VALID 20
+#define EEPROM_BUSY 19
+#define EEPROM_CHIP_SELECT_ENABLE 18
+#define EEPROM_BYTE_READ_START 17
+#define EEPROM_BYTE_WRITE_START 16
+#define EEPROM_READ_DATA 8
+#define EEPROM_WRITE_DATA 0
+ __le32 eeclkfreq;
+ u32 _unused0;
+ // offset 0x0010
+
+ __le32 pciirqenb0; /* interrupt PCI master ... */
+#define SETUP_PACKET_INTERRUPT_ENABLE 7
+#define ENDPOINT_F_INTERRUPT_ENABLE 6
+#define ENDPOINT_E_INTERRUPT_ENABLE 5
+#define ENDPOINT_D_INTERRUPT_ENABLE 4
+#define ENDPOINT_C_INTERRUPT_ENABLE 3
+#define ENDPOINT_B_INTERRUPT_ENABLE 2
+#define ENDPOINT_A_INTERRUPT_ENABLE 1
+#define ENDPOINT_0_INTERRUPT_ENABLE 0
+ __le32 pciirqenb1;
+#define PCI_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+ __le32 cpu_irqenb0; /* ... or onboard 8051 */
+#define SETUP_PACKET_INTERRUPT_ENABLE 7
+#define ENDPOINT_F_INTERRUPT_ENABLE 6
+#define ENDPOINT_E_INTERRUPT_ENABLE 5
+#define ENDPOINT_D_INTERRUPT_ENABLE 4
+#define ENDPOINT_C_INTERRUPT_ENABLE 3
+#define ENDPOINT_B_INTERRUPT_ENABLE 2
+#define ENDPOINT_A_INTERRUPT_ENABLE 1
+#define ENDPOINT_0_INTERRUPT_ENABLE 0
+ __le32 cpu_irqenb1;
+#define CPU_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_INTA_INTERRUPT_ENABLE 24
+#define PCI_PME_INTERRUPT_ENABLE 23
+#define PCI_SERR_INTERRUPT_ENABLE 22
+#define PCI_PERR_INTERRUPT_ENABLE 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+
+ // offset 0x0020
+ u32 _unused1;
+ __le32 usbirqenb1;
+#define USB_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_INTA_INTERRUPT_ENABLE 24
+#define PCI_PME_INTERRUPT_ENABLE 23
+#define PCI_SERR_INTERRUPT_ENABLE 22
+#define PCI_PERR_INTERRUPT_ENABLE 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+ __le32 irqstat0;
+#define INTA_ASSERTED 12
+#define SETUP_PACKET_INTERRUPT 7
+#define ENDPOINT_F_INTERRUPT 6
+#define ENDPOINT_E_INTERRUPT 5
+#define ENDPOINT_D_INTERRUPT 4
+#define ENDPOINT_C_INTERRUPT 3
+#define ENDPOINT_B_INTERRUPT 2
+#define ENDPOINT_A_INTERRUPT 1
+#define ENDPOINT_0_INTERRUPT 0
+ __le32 irqstat1;
+#define POWER_STATE_CHANGE_INTERRUPT 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT 26
+#define PCI_PARITY_ERROR_INTERRUPT 25
+#define PCI_INTA_INTERRUPT 24
+#define PCI_PME_INTERRUPT 23
+#define PCI_SERR_INTERRUPT 22
+#define PCI_PERR_INTERRUPT 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19
+#define PCI_RETRY_ABORT_INTERRUPT 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16
+#define GPIO_INTERRUPT 13
+#define DMA_D_INTERRUPT 12
+#define DMA_C_INTERRUPT 11
+#define DMA_B_INTERRUPT 10
+#define DMA_A_INTERRUPT 9
+#define EEPROM_DONE_INTERRUPT 8
+#define VBUS_INTERRUPT 7
+#define CONTROL_STATUS_INTERRUPT 6
+#define ROOT_PORT_RESET_INTERRUPT 4
+#define SUSPEND_REQUEST_INTERRUPT 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2
+#define RESUME_INTERRUPT 1
+#define SOF_INTERRUPT 0
+ // offset 0x0030
+ __le32 idxaddr;
+ __le32 idxdata;
+ __le32 fifoctl;
+#define PCI_BASE2_RANGE 16
+#define IGNORE_FIFO_AVAILABILITY 3
+#define PCI_BASE2_SELECT 2
+#define FIFO_CONFIGURATION_SELECT 0
+ u32 _unused2;
+ // offset 0x0040
+ __le32 memaddr;
+#define START 28
+#define DIRECTION 27
+#define FIFO_DIAGNOSTIC_SELECT 24
+#define MEMORY_ADDRESS 0
+ __le32 memdata0;
+ __le32 memdata1;
+ u32 _unused3;
+ // offset 0x0050
+ __le32 gpioctl;
+#define GPIO3_LED_SELECT 12
+#define GPIO3_INTERRUPT_ENABLE 11
+#define GPIO2_INTERRUPT_ENABLE 10
+#define GPIO1_INTERRUPT_ENABLE 9
+#define GPIO0_INTERRUPT_ENABLE 8
+#define GPIO3_OUTPUT_ENABLE 7
+#define GPIO2_OUTPUT_ENABLE 6
+#define GPIO1_OUTPUT_ENABLE 5
+#define GPIO0_OUTPUT_ENABLE 4
+#define GPIO3_DATA 3
+#define GPIO2_DATA 2
+#define GPIO1_DATA 1
+#define GPIO0_DATA 0
+ __le32 gpiostat;
+#define GPIO3_INTERRUPT 3
+#define GPIO2_INTERRUPT 2
+#define GPIO1_INTERRUPT 1
+#define GPIO0_INTERRUPT 0
+} __attribute__ ((packed));
+
+/* usb control, BAR0 + 0x0080 */
+struct net2280_usb_regs {
+ // offset 0x0080
+ __le32 stdrsp;
+#define STALL_UNSUPPORTED_REQUESTS 31
+#define SET_TEST_MODE 16
+#define GET_OTHER_SPEED_CONFIGURATION 15
+#define GET_DEVICE_QUALIFIER 14
+#define SET_ADDRESS 13
+#define ENDPOINT_SET_CLEAR_HALT 12
+#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11
+#define GET_STRING_DESCRIPTOR_2 10
+#define GET_STRING_DESCRIPTOR_1 9
+#define GET_STRING_DESCRIPTOR_0 8
+#define GET_SET_INTERFACE 6
+#define GET_SET_CONFIGURATION 5
+#define GET_CONFIGURATION_DESCRIPTOR 4
+#define GET_DEVICE_DESCRIPTOR 3
+#define GET_ENDPOINT_STATUS 2
+#define GET_INTERFACE_STATUS 1
+#define GET_DEVICE_STATUS 0
+ __le32 prodvendid;
+#define PRODUCT_ID 16
+#define VENDOR_ID 0
+ __le32 relnum;
+ __le32 usbctl;
+#define SERIAL_NUMBER_INDEX 16
+#define PRODUCT_ID_STRING_ENABLE 13
+#define VENDOR_ID_STRING_ENABLE 12
+#define USB_ROOT_PORT_WAKEUP_ENABLE 11
+#define VBUS_PIN 10
+#define TIMED_DISCONNECT 9
+#define SUSPEND_IMMEDIATELY 7
+#define SELF_POWERED_USB_DEVICE 6
+#define REMOTE_WAKEUP_SUPPORT 5
+#define PME_POLARITY 4
+#define USB_DETECT_ENABLE 3
+#define PME_WAKEUP_ENABLE 2
+#define DEVICE_REMOTE_WAKEUP_ENABLE 1
+#define SELF_POWERED_STATUS 0
+ // offset 0x0090
+ __le32 usbstat;
+#define HIGH_SPEED 7
+#define FULL_SPEED 6
+#define GENERATE_RESUME 5
+#define GENERATE_DEVICE_REMOTE_WAKEUP 4
+ __le32 xcvrdiag;
+#define FORCE_HIGH_SPEED_MODE 31
+#define FORCE_FULL_SPEED_MODE 30
+#define USB_TEST_MODE 24
+#define LINE_STATE 16
+#define TRANSCEIVER_OPERATION_MODE 2
+#define TRANSCEIVER_SELECT 1
+#define TERMINATION_SELECT 0
+ __le32 setup0123;
+ __le32 setup4567;
+ // offset 0x0090
+ u32 _unused0;
+ __le32 ouraddr;
+#define FORCE_IMMEDIATE 7
+#define OUR_USB_ADDRESS 0
+ __le32 ourconfig;
+} __attribute__ ((packed));
+
+/* pci control, BAR0 + 0x0100 */
+struct net2280_pci_regs {
+ // offset 0x0100
+ __le32 pcimstctl;
+#define PCI_ARBITER_PARK_SELECT 13
+#define PCI_MULTI LEVEL_ARBITER 12
+#define PCI_RETRY_ABORT_ENABLE 11
+#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10
+#define DMA_READ_MULTIPLE_ENABLE 9
+#define DMA_READ_LINE_ENABLE 8
+#define PCI_MASTER_COMMAND_SELECT 6
+#define MEM_READ_OR_WRITE 0
+#define IO_READ_OR_WRITE 1
+#define CFG_READ_OR_WRITE 2
+#define PCI_MASTER_START 5
+#define PCI_MASTER_READ_WRITE 4
+#define PCI_MASTER_WRITE 0
+#define PCI_MASTER_READ 1
+#define PCI_MASTER_BYTE_WRITE_ENABLES 0
+ __le32 pcimstaddr;
+ __le32 pcimstdata;
+ __le32 pcimststat;
+#define PCI_ARBITER_CLEAR 2
+#define PCI_EXTERNAL_ARBITER 1
+#define PCI_HOST_MODE 0
+} __attribute__ ((packed));
+
+/* dma control, BAR0 + 0x0180 ... array of four structs like this,
+ * for channels 0..3. see also struct net2280_dma: descriptor
+ * that can be loaded into some of these registers.
+ */
+struct net2280_dma_regs { /* [11.7] */
+ // offset 0x0180, 0x01a0, 0x01c0, 0x01e0,
+ __le32 dmactl;
+#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25
+#define DMA_CLEAR_COUNT_ENABLE 21
+#define DESCRIPTOR_POLLING_RATE 19
+#define POLL_CONTINUOUS 0
+#define POLL_1_USEC 1
+#define POLL_100_USEC 2
+#define POLL_1_MSEC 3
+#define DMA_VALID_BIT_POLLING_ENABLE 18
+#define DMA_VALID_BIT_ENABLE 17
+#define DMA_SCATTER_GATHER_ENABLE 16
+#define DMA_OUT_AUTO_START_ENABLE 4
+#define DMA_PREEMPT_ENABLE 3
+#define DMA_FIFO_VALIDATE 2
+#define DMA_ENABLE 1
+#define DMA_ADDRESS_HOLD 0
+ __le32 dmastat;
+#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25
+#define DMA_TRANSACTION_DONE_INTERRUPT 24
+#define DMA_ABORT 1
+#define DMA_START 0
+ u32 _unused0[2];
+ // offset 0x0190, 0x01b0, 0x01d0, 0x01f0,
+ __le32 dmacount;
+#define VALID_BIT 31
+#define DMA_DIRECTION 30
+#define DMA_DONE_INTERRUPT_ENABLE 29
+#define END_OF_CHAIN 28
+#define DMA_BYTE_COUNT_MASK ((1<<24)-1)
+#define DMA_BYTE_COUNT 0
+ __le32 dmaaddr;
+ __le32 dmadesc;
+ u32 _unused1;
+} __attribute__ ((packed));
+
+/* dedicated endpoint registers, BAR0 + 0x0200 */
+
+struct net2280_dep_regs { /* [11.8] */
+ // offset 0x0200, 0x0210, 0x220, 0x230, 0x240
+ __le32 dep_cfg;
+ // offset 0x0204, 0x0214, 0x224, 0x234, 0x244
+ __le32 dep_rsp;
+ u32 _unused[2];
+} __attribute__ ((packed));
+
+/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
+ * like this, for ep0 then the configurable endpoints A..F
+ * ep0 reserved for control; E and F have only 64 bytes of fifo
+ */
+struct net2280_ep_regs { /* [11.9] */
+ // offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0
+ __le32 ep_cfg;
+#define ENDPOINT_BYTE_COUNT 16
+#define ENDPOINT_ENABLE 10
+#define ENDPOINT_TYPE 8
+#define ENDPOINT_DIRECTION 7
+#define ENDPOINT_NUMBER 0
+ __le32 ep_rsp;
+#define SET_NAK_OUT_PACKETS 15
+#define SET_EP_HIDE_STATUS_PHASE 14
+#define SET_EP_FORCE_CRC_ERROR 13
+#define SET_INTERRUPT_MODE 12
+#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11
+#define SET_NAK_OUT_PACKETS_MODE 10
+#define SET_ENDPOINT_TOGGLE 9
+#define SET_ENDPOINT_HALT 8
+#define CLEAR_NAK_OUT_PACKETS 7
+#define CLEAR_EP_HIDE_STATUS_PHASE 6
+#define CLEAR_EP_FORCE_CRC_ERROR 5
+#define CLEAR_INTERRUPT_MODE 4
+#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3
+#define CLEAR_NAK_OUT_PACKETS_MODE 2
+#define CLEAR_ENDPOINT_TOGGLE 1
+#define CLEAR_ENDPOINT_HALT 0
+ __le32 ep_irqenb;
+#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6
+#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5
+#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3
+#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2
+#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1
+#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0
+ __le32 ep_stat;
+#define FIFO_VALID_COUNT 24
+#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22
+#define TIMEOUT 21
+#define USB_STALL_SENT 20
+#define USB_IN_NAK_SENT 19
+#define USB_IN_ACK_RCVD 18
+#define USB_OUT_PING_NAK_SENT 17
+#define USB_OUT_ACK_SENT 16
+#define FIFO_OVERFLOW 13
+#define FIFO_UNDERFLOW 12
+#define FIFO_FULL 11
+#define FIFO_EMPTY 10
+#define FIFO_FLUSH 9
+#define SHORT_PACKET_OUT_DONE_INTERRUPT 6
+#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5
+#define NAK_OUT_PACKETS 4
+#define DATA_PACKET_RECEIVED_INTERRUPT 3
+#define DATA_PACKET_TRANSMITTED_INTERRUPT 2
+#define DATA_OUT_PING_TOKEN_INTERRUPT 1
+#define DATA_IN_TOKEN_INTERRUPT 0
+ // offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0
+ __le32 ep_avail;
+ __le32 ep_data;
+ u32 _unused0[2];
+} __attribute__ ((packed));
+
+struct net2280_reg_write {
+ __le16 port;
+ __le32 addr;
+ __le32 val;
+} __attribute__ ((packed));
+
+struct net2280_reg_read {
+ __le16 port;
+ __le32 addr;
+} __attribute__ ((packed));
+#endif /* NET2280_H */
diff --git a/drivers/net/wireless/p54.h b/drivers/net/wireless/p54.h
new file mode 100644
index 00000000000..e558d697d9e
--- /dev/null
+++ b/drivers/net/wireless/p54.h
@@ -0,0 +1,80 @@
+#ifndef PRISM54_H
+#define PRISM54_H
+
+/*
+ * Shared defines for all mac80211 Prism54 code
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ *
+ * Based on the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+enum control_frame_types {
+ P54_CONTROL_TYPE_FILTER_SET = 0,
+ P54_CONTROL_TYPE_CHANNEL_CHANGE,
+ P54_CONTROL_TYPE_FREQDONE,
+ P54_CONTROL_TYPE_DCFINIT,
+ P54_CONTROL_TYPE_FREEQUEUE = 7,
+ P54_CONTROL_TYPE_TXDONE,
+ P54_CONTROL_TYPE_PING,
+ P54_CONTROL_TYPE_STAT_READBACK,
+ P54_CONTROL_TYPE_BBP,
+ P54_CONTROL_TYPE_EEPROM_READBACK,
+ P54_CONTROL_TYPE_LED
+};
+
+struct p54_control_hdr {
+ __le16 magic1;
+ __le16 len;
+ __le32 req_id;
+ __le16 type; /* enum control_frame_types */
+ u8 retry1;
+ u8 retry2;
+ u8 data[0];
+} __attribute__ ((packed));
+
+#define EEPROM_READBACK_LEN (sizeof(struct p54_control_hdr) + 4 /* p54_eeprom_lm86 */)
+#define MAX_RX_SIZE (IEEE80211_MAX_RTS_THRESHOLD + sizeof(struct p54_control_hdr) + 20 /* length of struct p54_rx_hdr */ + 16 )
+
+#define ISL38XX_DEV_FIRMWARE_ADDR 0x20000
+
+struct p54_common {
+ u32 rx_start;
+ u32 rx_end;
+ struct sk_buff_head tx_queue;
+ void (*tx)(struct ieee80211_hw *dev, struct p54_control_hdr *data,
+ size_t len, int free_on_tx);
+ int (*open)(struct ieee80211_hw *dev);
+ void (*stop)(struct ieee80211_hw *dev);
+ int mode;
+ u8 *mac_addr;
+ struct pda_iq_autocal_entry *iq_autocal;
+ unsigned int iq_autocal_len;
+ struct pda_channel_output_limit *output_limit;
+ unsigned int output_limit_len;
+ struct pda_pa_curve_data *curve_data;
+ __le16 rxhw;
+ u8 version;
+ unsigned int tx_hdr_len;
+ void *cached_vdcf;
+ unsigned int fw_var;
+ /* FIXME: this channels/modes/rates stuff sucks */
+ struct ieee80211_channel channels[14];
+ struct ieee80211_rate rates[12];
+ struct ieee80211_hw_mode modes[2];
+ struct ieee80211_tx_queue_stats tx_stats;
+};
+
+int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb);
+void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw);
+int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len);
+void p54_fill_eeprom_readback(struct p54_control_hdr *hdr);
+struct ieee80211_hw *p54_init_common(size_t priv_data_len);
+void p54_free_common(struct ieee80211_hw *dev);
+
+#endif /* PRISM54_H */
diff --git a/drivers/net/wireless/p54common.c b/drivers/net/wireless/p54common.c
new file mode 100644
index 00000000000..b05b5c5b4c0
--- /dev/null
+++ b/drivers/net/wireless/p54common.c
@@ -0,0 +1,983 @@
+
+/*
+ * Common code for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2007, Christian Lamparter <chunkeey@web.de>
+ *
+ * Based on the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+
+#include <net/mac80211.h>
+
+#include "p54.h"
+#include "p54common.h"
+
+MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
+MODULE_DESCRIPTION("Softmac Prism54 common code");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("prism54common");
+
+void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
+{
+ struct p54_common *priv = dev->priv;
+ struct bootrec_exp_if *exp_if;
+ struct bootrec *bootrec;
+ u32 *data = (u32 *)fw->data;
+ u32 *end_data = (u32 *)fw->data + (fw->size >> 2);
+ u8 *fw_version = NULL;
+ size_t len;
+ int i;
+
+ if (priv->rx_start)
+ return;
+
+ while (data < end_data && *data)
+ data++;
+
+ while (data < end_data && !*data)
+ data++;
+
+ bootrec = (struct bootrec *) data;
+
+ while (bootrec->data <= end_data &&
+ (bootrec->data + (len = le32_to_cpu(bootrec->len))) <= end_data) {
+ u32 code = le32_to_cpu(bootrec->code);
+ switch (code) {
+ case BR_CODE_COMPONENT_ID:
+ switch (be32_to_cpu(*bootrec->data)) {
+ case FW_FMAC:
+ printk(KERN_INFO "p54: FreeMAC firmware\n");
+ break;
+ case FW_LM20:
+ printk(KERN_INFO "p54: LM20 firmware\n");
+ break;
+ case FW_LM86:
+ printk(KERN_INFO "p54: LM86 firmware\n");
+ break;
+ case FW_LM87:
+ printk(KERN_INFO "p54: LM87 firmware - not supported yet!\n");
+ break;
+ default:
+ printk(KERN_INFO "p54: unknown firmware\n");
+ break;
+ }
+ break;
+ case BR_CODE_COMPONENT_VERSION:
+ /* 24 bytes should be enough for all firmwares */
+ if (strnlen((unsigned char*)bootrec->data, 24) < 24)
+ fw_version = (unsigned char*)bootrec->data;
+ break;
+ case BR_CODE_DESCR:
+ priv->rx_start = le32_to_cpu(bootrec->data[1]);
+ /* FIXME add sanity checking */
+ priv->rx_end = le32_to_cpu(bootrec->data[2]) - 0x3500;
+ break;
+ case BR_CODE_EXPOSED_IF:
+ exp_if = (struct bootrec_exp_if *) bootrec->data;
+ for (i = 0; i < (len * sizeof(*exp_if) / 4); i++)
+ if (exp_if[i].if_id == 0x1a)
+ priv->fw_var = le16_to_cpu(exp_if[i].variant);
+ break;
+ case BR_CODE_DEPENDENT_IF:
+ break;
+ case BR_CODE_END_OF_BRA:
+ case LEGACY_BR_CODE_END_OF_BRA:
+ end_data = NULL;
+ break;
+ default:
+ break;
+ }
+ bootrec = (struct bootrec *)&bootrec->data[len];
+ }
+
+ if (fw_version)
+ printk(KERN_INFO "p54: FW rev %s - Softmac protocol %x.%x\n",
+ fw_version, priv->fw_var >> 8, priv->fw_var & 0xff);
+
+ if (priv->fw_var >= 0x300) {
+ /* Firmware supports QoS, use it! */
+ priv->tx_stats.data[0].limit = 3;
+ priv->tx_stats.data[1].limit = 4;
+ priv->tx_stats.data[2].limit = 3;
+ priv->tx_stats.data[3].limit = 1;
+ dev->queues = 4;
+ }
+}
+EXPORT_SYMBOL_GPL(p54_parse_firmware);
+
+static int p54_convert_rev0_to_rev1(struct ieee80211_hw *dev,
+ struct pda_pa_curve_data *curve_data)
+{
+ struct p54_common *priv = dev->priv;
+ struct pda_pa_curve_data_sample_rev1 *rev1;
+ struct pda_pa_curve_data_sample_rev0 *rev0;
+ size_t cd_len = sizeof(*curve_data) +
+ (curve_data->points_per_channel*sizeof(*rev1) + 2) *
+ curve_data->channels;
+ unsigned int i, j;
+ void *source, *target;
+
+ priv->curve_data = kmalloc(cd_len, GFP_KERNEL);
+ if (!priv->curve_data)
+ return -ENOMEM;
+
+ memcpy(priv->curve_data, curve_data, sizeof(*curve_data));
+ source = curve_data->data;
+ target = priv->curve_data->data;
+ for (i = 0; i < curve_data->channels; i++) {
+ __le16 *freq = source;
+ source += sizeof(__le16);
+ *((__le16 *)target) = *freq;
+ target += sizeof(__le16);
+ for (j = 0; j < curve_data->points_per_channel; j++) {
+ rev1 = target;
+ rev0 = source;
+
+ rev1->rf_power = rev0->rf_power;
+ rev1->pa_detector = rev0->pa_detector;
+ rev1->data_64qam = rev0->pcv;
+ /* "invent" the points for the other modulations */
+#define SUB(x,y) (u8)((x) - (y)) > (x) ? 0 : (x) - (y)
+ rev1->data_16qam = SUB(rev0->pcv, 12);
+ rev1->data_qpsk = SUB(rev1->data_16qam, 12);
+ rev1->data_bpsk = SUB(rev1->data_qpsk, 12);
+ rev1->data_barker= SUB(rev1->data_bpsk, 14);
+#undef SUB
+ target += sizeof(*rev1);
+ source += sizeof(*rev0);
+ }
+ }
+
+ return 0;
+}
+
+int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
+{
+ struct p54_common *priv = dev->priv;
+ struct eeprom_pda_wrap *wrap = NULL;
+ struct pda_entry *entry;
+ int i = 0;
+ unsigned int data_len, entry_len;
+ void *tmp;
+ int err;
+
+ wrap = (struct eeprom_pda_wrap *) eeprom;
+ entry = (void *)wrap->data + wrap->len;
+ i += 2;
+ i += le16_to_cpu(entry->len)*2;
+ while (i < len) {
+ entry_len = le16_to_cpu(entry->len);
+ data_len = ((entry_len - 1) << 1);
+ switch (le16_to_cpu(entry->code)) {
+ case PDR_MAC_ADDRESS:
+ SET_IEEE80211_PERM_ADDR(dev, entry->data);
+ break;
+ case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS:
+ if (data_len < 2) {
+ err = -EINVAL;
+ goto err;
+ }
+
+ if (2 + entry->data[1]*sizeof(*priv->output_limit) > data_len) {
+ err = -EINVAL;
+ goto err;
+ }
+
+ priv->output_limit = kmalloc(entry->data[1] *
+ sizeof(*priv->output_limit), GFP_KERNEL);
+
+ if (!priv->output_limit) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ memcpy(priv->output_limit, &entry->data[2],
+ entry->data[1]*sizeof(*priv->output_limit));
+ priv->output_limit_len = entry->data[1];
+ break;
+ case PDR_PRISM_PA_CAL_CURVE_DATA:
+ if (data_len < sizeof(struct pda_pa_curve_data)) {
+ err = -EINVAL;
+ goto err;
+ }
+
+ if (((struct pda_pa_curve_data *)entry->data)->cal_method_rev) {
+ priv->curve_data = kmalloc(data_len, GFP_KERNEL);
+ if (!priv->curve_data) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ memcpy(priv->curve_data, entry->data, data_len);
+ } else {
+ err = p54_convert_rev0_to_rev1(dev, (struct pda_pa_curve_data *)entry->data);
+ if (err)
+ goto err;
+ }
+
+ break;
+ case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
+ priv->iq_autocal = kmalloc(data_len, GFP_KERNEL);
+ if (!priv->iq_autocal) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ memcpy(priv->iq_autocal, entry->data, data_len);
+ priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry);
+ break;
+ case PDR_INTERFACE_LIST:
+ tmp = entry->data;
+ while ((u8 *)tmp < entry->data + data_len) {
+ struct bootrec_exp_if *exp_if = tmp;
+ if (le16_to_cpu(exp_if->if_id) == 0xF)
+ priv->rxhw = exp_if->variant & cpu_to_le16(0x07);
+ tmp += sizeof(struct bootrec_exp_if);
+ }
+ break;
+ case PDR_HARDWARE_PLATFORM_COMPONENT_ID:
+ priv->version = *(u8 *)(entry->data + 1);
+ break;
+ case PDR_END:
+ i = len;
+ break;
+ }
+
+ entry = (void *)entry + (entry_len + 1)*2;
+ i += 2;
+ i += entry_len*2;
+ }
+
+ if (!priv->iq_autocal || !priv->output_limit || !priv->curve_data) {
+ printk(KERN_ERR "p54: not all required entries found in eeprom!\n");
+ err = -EINVAL;
+ goto err;
+ }
+
+ return 0;
+
+ err:
+ if (priv->iq_autocal) {
+ kfree(priv->iq_autocal);
+ priv->iq_autocal = NULL;
+ }
+
+ if (priv->output_limit) {
+ kfree(priv->output_limit);
+ priv->output_limit = NULL;
+ }
+
+ if (priv->curve_data) {
+ kfree(priv->curve_data);
+ priv->curve_data = NULL;
+ }
+
+ printk(KERN_ERR "p54: eeprom parse failed!\n");
+ return err;
+}
+EXPORT_SYMBOL_GPL(p54_parse_eeprom);
+
+void p54_fill_eeprom_readback(struct p54_control_hdr *hdr)
+{
+ struct p54_eeprom_lm86 *eeprom_hdr;
+
+ hdr->magic1 = cpu_to_le16(0x8000);
+ hdr->len = cpu_to_le16(sizeof(*eeprom_hdr) + 0x2000);
+ hdr->type = cpu_to_le16(P54_CONTROL_TYPE_EEPROM_READBACK);
+ hdr->retry1 = hdr->retry2 = 0;
+ eeprom_hdr = (struct p54_eeprom_lm86 *) hdr->data;
+ eeprom_hdr->offset = 0x0;
+ eeprom_hdr->len = cpu_to_le16(0x2000);
+}
+EXPORT_SYMBOL_GPL(p54_fill_eeprom_readback);
+
+static void p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
+{
+ struct p54_rx_hdr *hdr = (struct p54_rx_hdr *) skb->data;
+ struct ieee80211_rx_status rx_status = {0};
+ u16 freq = le16_to_cpu(hdr->freq);
+
+ rx_status.ssi = hdr->rssi;
+ rx_status.rate = hdr->rate & 0x1f; /* report short preambles & CCK too */
+ rx_status.channel = freq == 2484 ? 14 : (freq - 2407)/5;
+ rx_status.freq = freq;
+ rx_status.phymode = MODE_IEEE80211G;
+ rx_status.antenna = hdr->antenna;
+ rx_status.mactime = le64_to_cpu(hdr->timestamp);
+
+ skb_pull(skb, sizeof(*hdr));
+ skb_trim(skb, le16_to_cpu(hdr->len));
+
+ ieee80211_rx_irqsafe(dev, skb, &rx_status);
+}
+
+static void inline p54_wake_free_queues(struct ieee80211_hw *dev)
+{
+ struct p54_common *priv = dev->priv;
+ int i;
+
+ /* ieee80211_start_queues is great if all queues are really empty.
+ * But, what if some are full? */
+
+ for (i = 0; i < dev->queues; i++)
+ if (priv->tx_stats.data[i].len < priv->tx_stats.data[i].limit)
+ ieee80211_wake_queue(dev, i);
+}
+
+static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
+{
+ struct p54_common *priv = dev->priv;
+ struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data;
+ struct p54_frame_sent_hdr *payload = (struct p54_frame_sent_hdr *) hdr->data;
+ struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next;
+ u32 addr = le32_to_cpu(hdr->req_id) - 0x70;
+ struct memrecord *range = NULL;
+ u32 freed = 0;
+ u32 last_addr = priv->rx_start;
+
+ while (entry != (struct sk_buff *)&priv->tx_queue) {
+ range = (struct memrecord *)&entry->cb;
+ if (range->start_addr == addr) {
+ struct ieee80211_tx_status status = {{0}};
+ struct p54_control_hdr *entry_hdr;
+ struct p54_tx_control_allocdata *entry_data;
+ int pad = 0;
+
+ if (entry->next != (struct sk_buff *)&priv->tx_queue)
+ freed = ((struct memrecord *)&entry->next->cb)->start_addr - last_addr;
+ else
+ freed = priv->rx_end - last_addr;
+
+ last_addr = range->end_addr;
+ __skb_unlink(entry, &priv->tx_queue);
+ if (!range->control) {
+ kfree_skb(entry);
+ break;
+ }
+ memcpy(&status.control, range->control,
+ sizeof(status.control));
+ kfree(range->control);
+ priv->tx_stats.data[status.control.queue].len--;
+
+ entry_hdr = (struct p54_control_hdr *) entry->data;
+ entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data;
+ if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0)
+ pad = entry_data->align[0];
+
+ if (!status.control.flags & IEEE80211_TXCTL_NO_ACK) {
+ if (!(payload->status & 0x01))
+ status.flags |= IEEE80211_TX_STATUS_ACK;
+ else
+ status.excessive_retries = 1;
+ }
+ status.retry_count = payload->retries - 1;
+ status.ack_signal = le16_to_cpu(payload->ack_rssi);
+ skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
+ ieee80211_tx_status_irqsafe(dev, entry, &status);
+ break;
+ } else
+ last_addr = range->end_addr;
+ entry = entry->next;
+ }
+
+ if (freed >= IEEE80211_MAX_RTS_THRESHOLD + 0x170 +
+ sizeof(struct p54_control_hdr))
+ p54_wake_free_queues(dev);
+}
+
+static void p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb)
+{
+ struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data;
+
+ switch (le16_to_cpu(hdr->type)) {
+ case P54_CONTROL_TYPE_TXDONE:
+ p54_rx_frame_sent(dev, skb);
+ break;
+ case P54_CONTROL_TYPE_BBP:
+ break;
+ default:
+ printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n",
+ wiphy_name(dev->wiphy), le16_to_cpu(hdr->type));
+ break;
+ }
+}
+
+/* returns zero if skb can be reused */
+int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb)
+{
+ u8 type = le16_to_cpu(*((__le16 *)skb->data)) >> 8;
+ switch (type) {
+ case 0x00:
+ case 0x01:
+ p54_rx_data(dev, skb);
+ return -1;
+ case 0x4d:
+ /* TODO: do something better... but then again, I've never seen this happen */
+ printk(KERN_ERR "%s: Received fault. Probably need to restart hardware now..\n",
+ wiphy_name(dev->wiphy));
+ break;
+ case 0x80:
+ p54_rx_control(dev, skb);
+ break;
+ default:
+ printk(KERN_ERR "%s: unknown frame RXed (0x%02x)\n",
+ wiphy_name(dev->wiphy), type);
+ break;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(p54_rx);
+
+/*
+ * So, the firmware is somewhat stupid and doesn't know what places in its
+ * memory incoming data should go to. By poking around in the firmware, we
+ * can find some unused memory to upload our packets to. However, data that we
+ * want the card to TX needs to stay intact until the card has told us that
+ * it is done with it. This function finds empty places we can upload to and
+ * marks allocated areas as reserved if necessary. p54_rx_frame_sent frees
+ * allocated areas.
+ */
+static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
+ struct p54_control_hdr *data, u32 len,
+ struct ieee80211_tx_control *control)
+{
+ struct p54_common *priv = dev->priv;
+ struct sk_buff *entry = priv->tx_queue.next;
+ struct sk_buff *target_skb = NULL;
+ struct memrecord *range;
+ u32 last_addr = priv->rx_start;
+ u32 largest_hole = 0;
+ u32 target_addr = priv->rx_start;
+ unsigned long flags;
+ unsigned int left;
+ len = (len + 0x170 + 3) & ~0x3; /* 0x70 headroom, 0x100 tailroom */
+
+ spin_lock_irqsave(&priv->tx_queue.lock, flags);
+ left = skb_queue_len(&priv->tx_queue);
+ while (left--) {
+ u32 hole_size;
+ range = (struct memrecord *)&entry->cb;
+ hole_size = range->start_addr - last_addr;
+ if (!target_skb && hole_size >= len) {
+ target_skb = entry->prev;
+ hole_size -= len;
+ target_addr = last_addr;
+ }
+ largest_hole = max(largest_hole, hole_size);
+ last_addr = range->end_addr;
+ entry = entry->next;
+ }
+ if (!target_skb && priv->rx_end - last_addr >= len) {
+ target_skb = priv->tx_queue.prev;
+ largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
+ if (!skb_queue_empty(&priv->tx_queue)) {
+ range = (struct memrecord *)&target_skb->cb;
+ target_addr = range->end_addr;
+ }
+ } else
+ largest_hole = max(largest_hole, priv->rx_end - last_addr);
+
+ if (skb) {
+ range = (struct memrecord *)&skb->cb;
+ range->start_addr = target_addr;
+ range->end_addr = target_addr + len;
+ range->control = control;
+ __skb_queue_after(&priv->tx_queue, target_skb, skb);
+ if (largest_hole < IEEE80211_MAX_RTS_THRESHOLD + 0x170 +
+ sizeof(struct p54_control_hdr))
+ ieee80211_stop_queues(dev);
+ }
+ spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
+
+ data->req_id = cpu_to_le32(target_addr + 0x70);
+}
+
+static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
+ struct ieee80211_tx_control *control)
+{
+ struct ieee80211_tx_queue_stats_data *current_queue;
+ struct p54_common *priv = dev->priv;
+ struct p54_control_hdr *hdr;
+ struct p54_tx_control_allocdata *txhdr;
+ struct ieee80211_tx_control *control_copy;
+ size_t padding, len;
+ u8 rate;
+
+ current_queue = &priv->tx_stats.data[control->queue];
+ if (unlikely(current_queue->len > current_queue->limit))
+ return NETDEV_TX_BUSY;
+ current_queue->len++;
+ current_queue->count++;
+ if (current_queue->len == current_queue->limit)
+ ieee80211_stop_queue(dev, control->queue);
+
+ padding = (unsigned long)(skb->data - (sizeof(*hdr) + sizeof(*txhdr))) & 3;
+ len = skb->len;
+
+ control_copy = kmalloc(sizeof(*control), GFP_ATOMIC);
+ if (control_copy)
+ memcpy(control_copy, control, sizeof(*control));
+
+ txhdr = (struct p54_tx_control_allocdata *)
+ skb_push(skb, sizeof(*txhdr) + padding);
+ hdr = (struct p54_control_hdr *) skb_push(skb, sizeof(*hdr));
+
+ if (padding)
+ hdr->magic1 = cpu_to_le16(0x4010);
+ else
+ hdr->magic1 = cpu_to_le16(0x0010);
+ hdr->len = cpu_to_le16(len);
+ hdr->type = (control->flags & IEEE80211_TXCTL_NO_ACK) ? 0 : cpu_to_le16(1);
+ hdr->retry1 = hdr->retry2 = control->retry_limit;
+ p54_assign_address(dev, skb, hdr, skb->len, control_copy);
+
+ memset(txhdr->wep_key, 0x0, 16);
+ txhdr->padding = 0;
+ txhdr->padding2 = 0;
+
+ /* TODO: add support for alternate retry TX rates */
+ rate = control->tx_rate;
+ if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS)
+ rate |= 0x40;
+ else if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
+ rate |= 0x20;
+ memset(txhdr->rateset, rate, 8);
+ txhdr->wep_key_present = 0;
+ txhdr->wep_key_len = 0;
+ txhdr->frame_type = cpu_to_le32(control->queue + 4);
+ txhdr->magic4 = 0;
+ txhdr->antenna = (control->antenna_sel_tx == 0) ?
+ 2 : control->antenna_sel_tx - 1;
+ txhdr->output_power = 0x7f; // HW Maximum
+ txhdr->magic5 = (control->flags & IEEE80211_TXCTL_NO_ACK) ?
+ 0 : ((rate > 0x3) ? cpu_to_le32(0x33) : cpu_to_le32(0x23));
+ if (padding)
+ txhdr->align[0] = padding;
+
+ priv->tx(dev, hdr, skb->len, 0);
+ return 0;
+}
+
+static int p54_set_filter(struct ieee80211_hw *dev, u16 filter_type,
+ const u8 *dst, const u8 *src, u8 antenna,
+ u32 magic3, u32 magic8, u32 magic9)
+{
+ struct p54_common *priv = dev->priv;
+ struct p54_control_hdr *hdr;
+ struct p54_tx_control_filter *filter;
+
+ hdr = kzalloc(sizeof(*hdr) + sizeof(*filter) +
+ priv->tx_hdr_len, GFP_KERNEL);
+ if (!hdr)
+ return -ENOMEM;
+
+ hdr = (void *)hdr + priv->tx_hdr_len;
+
+ filter = (struct p54_tx_control_filter *) hdr->data;
+ hdr->magic1 = cpu_to_le16(0x8001);
+ hdr->len = cpu_to_le16(sizeof(*filter));
+ p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*filter), NULL);
+ hdr->type = cpu_to_le16(P54_CONTROL_TYPE_FILTER_SET);
+
+ filter->filter_type = cpu_to_le16(filter_type);
+ memcpy(filter->dst, dst, ETH_ALEN);
+ if (!src)
+ memset(filter->src, ~0, ETH_ALEN);
+ else
+ memcpy(filter->src, src, ETH_ALEN);
+ filter->antenna = antenna;
+ filter->magic3 = cpu_to_le32(magic3);
+ filter->rx_addr = cpu_to_le32(priv->rx_end);
+ filter->max_rx = cpu_to_le16(0x0620); /* FIXME: for usb ver 1.. maybe */
+ filter->rxhw = priv->rxhw;
+ filter->magic8 = cpu_to_le16(magic8);
+ filter->magic9 = cpu_to_le16(magic9);
+
+ priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*filter), 1);
+ return 0;
+}
+
+static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq)
+{
+ struct p54_common *priv = dev->priv;
+ struct p54_control_hdr *hdr;
+ struct p54_tx_control_channel *chan;
+ unsigned int i;
+ size_t payload_len = sizeof(*chan) + sizeof(u32)*2 +
+ sizeof(*chan->curve_data) *
+ priv->curve_data->points_per_channel;
+ void *entry;
+
+ hdr = kzalloc(sizeof(*hdr) + payload_len +
+ priv->tx_hdr_len, GFP_KERNEL);
+ if (!hdr)
+ return -ENOMEM;
+
+ hdr = (void *)hdr + priv->tx_hdr_len;
+
+ chan = (struct p54_tx_control_channel *) hdr->data;
+
+ hdr->magic1 = cpu_to_le16(0x8001);
+ hdr->len = cpu_to_le16(sizeof(*chan));
+ hdr->type = cpu_to_le16(P54_CONTROL_TYPE_CHANNEL_CHANGE);
+ p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + payload_len, NULL);
+
+ chan->magic1 = cpu_to_le16(0x1);
+ chan->magic2 = cpu_to_le16(0x0);
+
+ for (i = 0; i < priv->iq_autocal_len; i++) {
+ if (priv->iq_autocal[i].freq != freq)
+ continue;
+
+ memcpy(&chan->iq_autocal, &priv->iq_autocal[i],
+ sizeof(*priv->iq_autocal));
+ break;
+ }
+ if (i == priv->iq_autocal_len)
+ goto err;
+
+ for (i = 0; i < priv->output_limit_len; i++) {
+ if (priv->output_limit[i].freq != freq)
+ continue;
+
+ chan->val_barker = 0x38;
+ chan->val_bpsk = priv->output_limit[i].val_bpsk;
+ chan->val_qpsk = priv->output_limit[i].val_qpsk;
+ chan->val_16qam = priv->output_limit[i].val_16qam;
+ chan->val_64qam = priv->output_limit[i].val_64qam;
+ break;
+ }
+ if (i == priv->output_limit_len)
+ goto err;
+
+ chan->pa_points_per_curve = priv->curve_data->points_per_channel;
+
+ entry = priv->curve_data->data;
+ for (i = 0; i < priv->curve_data->channels; i++) {
+ if (*((__le16 *)entry) != freq) {
+ entry += sizeof(__le16);
+ entry += sizeof(struct pda_pa_curve_data_sample_rev1) *
+ chan->pa_points_per_curve;
+ continue;
+ }
+
+ entry += sizeof(__le16);
+ memcpy(chan->curve_data, entry, sizeof(*chan->curve_data) *
+ chan->pa_points_per_curve);
+ break;
+ }
+
+ memcpy(hdr->data + payload_len - 4, &chan->val_bpsk, 4);
+
+ priv->tx(dev, hdr, sizeof(*hdr) + payload_len, 1);
+ return 0;
+
+ err:
+ printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy));
+ kfree(hdr);
+ return -EINVAL;
+}
+
+static int p54_set_leds(struct ieee80211_hw *dev, int mode, int link, int act)
+{
+ struct p54_common *priv = dev->priv;
+ struct p54_control_hdr *hdr;
+ struct p54_tx_control_led *led;
+
+ hdr = kzalloc(sizeof(*hdr) + sizeof(*led) +
+ priv->tx_hdr_len, GFP_KERNEL);
+ if (!hdr)
+ return -ENOMEM;
+
+ hdr = (void *)hdr + priv->tx_hdr_len;
+ hdr->magic1 = cpu_to_le16(0x8001);
+ hdr->len = cpu_to_le16(sizeof(*led));
+ hdr->type = cpu_to_le16(P54_CONTROL_TYPE_LED);
+ p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*led), NULL);
+
+ led = (struct p54_tx_control_led *) hdr->data;
+ led->mode = cpu_to_le16(mode);
+ led->led_permanent = cpu_to_le16(link);
+ led->led_temporary = cpu_to_le16(act);
+ led->duration = cpu_to_le16(1000);
+
+ priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*led), 1);
+
+ return 0;
+}
+
+#define P54_SET_QUEUE(queue, ai_fs, cw_min, cw_max, burst) \
+do { \
+ queue.aifs = cpu_to_le16(ai_fs); \
+ queue.cwmin = cpu_to_le16(cw_min); \
+ queue.cwmax = cpu_to_le16(cw_max); \
+ queue.txop = (burst == 0) ? \
+ 0 : cpu_to_le16((burst * 100) / 32 + 1); \
+} while(0)
+
+static void p54_init_vdcf(struct ieee80211_hw *dev)
+{
+ struct p54_common *priv = dev->priv;
+ struct p54_control_hdr *hdr;
+ struct p54_tx_control_vdcf *vdcf;
+
+ /* all USB V1 adapters need a extra headroom */
+ hdr = (void *)priv->cached_vdcf + priv->tx_hdr_len;
+ hdr->magic1 = cpu_to_le16(0x8001);
+ hdr->len = cpu_to_le16(sizeof(*vdcf));
+ hdr->type = cpu_to_le16(P54_CONTROL_TYPE_DCFINIT);
+ hdr->req_id = cpu_to_le32(priv->rx_start);
+
+ vdcf = (struct p54_tx_control_vdcf *) hdr->data;
+
+ P54_SET_QUEUE(vdcf->queue[0], 0x0002, 0x0003, 0x0007, 0x000f);
+ P54_SET_QUEUE(vdcf->queue[1], 0x0002, 0x0007, 0x000f, 0x001e);
+ P54_SET_QUEUE(vdcf->queue[2], 0x0002, 0x000f, 0x03ff, 0x0014);
+ P54_SET_QUEUE(vdcf->queue[3], 0x0007, 0x000f, 0x03ff, 0x0000);
+}
+
+static void p54_set_vdcf(struct ieee80211_hw *dev)
+{
+ struct p54_common *priv = dev->priv;
+ struct p54_control_hdr *hdr;
+ struct p54_tx_control_vdcf *vdcf;
+
+ hdr = (void *)priv->cached_vdcf + priv->tx_hdr_len;
+
+ p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*vdcf), NULL);
+
+ vdcf = (struct p54_tx_control_vdcf *) hdr->data;
+
+ if (dev->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
+ vdcf->slottime = 9;
+ vdcf->magic1 = 0x00;
+ vdcf->magic2 = 0x10;
+ } else {
+ vdcf->slottime = 20;
+ vdcf->magic1 = 0x0a;
+ vdcf->magic2 = 0x06;
+ }
+
+ /* (see prism54/isl_oid.h for further details) */
+ vdcf->frameburst = cpu_to_le16(0);
+
+ priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*vdcf), 0);
+}
+
+static int p54_add_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct p54_common *priv = dev->priv;
+ int err;
+
+ /* NOTE: using IEEE80211_IF_TYPE_MGMT to indicate no mode selected */
+ if (priv->mode != IEEE80211_IF_TYPE_MGMT)
+ return -1;
+
+ switch (conf->type) {
+ case IEEE80211_IF_TYPE_STA:
+ priv->mode = conf->type;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ priv->mac_addr = conf->mac_addr;
+
+ err = priv->open(dev);
+ if (err) {
+ priv->mode = IEEE80211_IF_TYPE_MGMT;
+ skb_queue_purge(&priv->tx_queue);
+ return err;
+ }
+
+ p54_set_filter(dev, 0, priv->mac_addr, NULL, 0, 1, 0, 0xF642);
+ p54_set_filter(dev, 0, priv->mac_addr, NULL, 1, 0, 0, 0xF642);
+ p54_set_vdcf(dev);
+
+ switch (conf->type) {
+ case IEEE80211_IF_TYPE_STA:
+ p54_set_filter(dev, 1, priv->mac_addr, NULL, 0, 0x15F, 0x1F4, 0);
+ break;
+ }
+
+ p54_set_leds(dev, 1, 0, 0);
+
+ return 0;
+}
+
+static void p54_remove_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct p54_common *priv = dev->priv;
+ struct sk_buff *skb;
+ while ((skb = skb_dequeue(&priv->tx_queue))) {
+ struct memrecord *range = (struct memrecord *)&skb->cb;
+ if (range->control)
+ kfree(range->control);
+ kfree_skb(skb);
+ }
+ priv->mode = IEEE80211_IF_TYPE_MGMT;
+ priv->stop(dev);
+}
+
+static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
+{
+ int ret;
+
+ ret = p54_set_freq(dev, cpu_to_le16(conf->freq));
+ p54_set_vdcf(dev);
+ return ret;
+}
+
+static int p54_config_interface(struct ieee80211_hw *dev, int if_id,
+ struct ieee80211_if_conf *conf)
+{
+ struct p54_common *priv = dev->priv;
+
+ p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 0, 1, 0, 0xF642);
+ p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 2, 0, 0, 0);
+ p54_set_leds(dev, 1, !is_multicast_ether_addr(conf->bssid), 0);
+ return 0;
+}
+
+static int p54_conf_tx(struct ieee80211_hw *dev, int queue,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct p54_common *priv = dev->priv;
+ struct p54_tx_control_vdcf *vdcf;
+
+ vdcf = (struct p54_tx_control_vdcf *)(((struct p54_control_hdr *)
+ ((void *)priv->cached_vdcf + priv->tx_hdr_len))->data);
+
+ if ((params) && !((queue < 0) || (queue > 4))) {
+ P54_SET_QUEUE(vdcf->queue[queue], params->aifs,
+ params->cw_min, params->cw_max, params->burst_time);
+ } else
+ return -EINVAL;
+
+ p54_set_vdcf(dev);
+
+ return 0;
+}
+
+static int p54_get_stats(struct ieee80211_hw *dev,
+ struct ieee80211_low_level_stats *stats)
+{
+ /* TODO */
+ return 0;
+}
+
+static int p54_get_tx_stats(struct ieee80211_hw *dev,
+ struct ieee80211_tx_queue_stats *stats)
+{
+ struct p54_common *priv = dev->priv;
+ unsigned int i;
+
+ for (i = 0; i < dev->queues; i++)
+ memcpy(&stats->data[i], &priv->tx_stats.data[i],
+ sizeof(stats->data[i]));
+
+ return 0;
+}
+
+static const struct ieee80211_ops p54_ops = {
+ .tx = p54_tx,
+ .add_interface = p54_add_interface,
+ .remove_interface = p54_remove_interface,
+ .config = p54_config,
+ .config_interface = p54_config_interface,
+ .conf_tx = p54_conf_tx,
+ .get_stats = p54_get_stats,
+ .get_tx_stats = p54_get_tx_stats
+};
+
+struct ieee80211_hw *p54_init_common(size_t priv_data_len)
+{
+ struct ieee80211_hw *dev;
+ struct p54_common *priv;
+ int i;
+
+ dev = ieee80211_alloc_hw(priv_data_len, &p54_ops);
+ if (!dev)
+ return NULL;
+
+ priv = dev->priv;
+ priv->mode = IEEE80211_IF_TYPE_MGMT;
+ skb_queue_head_init(&priv->tx_queue);
+ memcpy(priv->channels, p54_channels, sizeof(p54_channels));
+ memcpy(priv->rates, p54_rates, sizeof(p54_rates));
+ priv->modes[1].mode = MODE_IEEE80211B;
+ priv->modes[1].num_rates = 4;
+ priv->modes[1].rates = priv->rates;
+ priv->modes[1].num_channels = ARRAY_SIZE(p54_channels);
+ priv->modes[1].channels = priv->channels;
+ priv->modes[0].mode = MODE_IEEE80211G;
+ priv->modes[0].num_rates = ARRAY_SIZE(p54_rates);
+ priv->modes[0].rates = priv->rates;
+ priv->modes[0].num_channels = ARRAY_SIZE(p54_channels);
+ priv->modes[0].channels = priv->channels;
+ dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */
+ IEEE80211_HW_RX_INCLUDES_FCS;
+ dev->channel_change_time = 1000; /* TODO: find actual value */
+ dev->max_rssi = 127;
+
+ priv->tx_stats.data[0].limit = 5;
+ dev->queues = 1;
+
+ dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 +
+ sizeof(struct p54_tx_control_allocdata);
+
+ priv->cached_vdcf = kzalloc(sizeof(struct p54_tx_control_vdcf) +
+ priv->tx_hdr_len + sizeof(struct p54_control_hdr), GFP_KERNEL);
+
+ if (!priv->cached_vdcf) {
+ ieee80211_free_hw(dev);
+ return NULL;
+ }
+
+ p54_init_vdcf(dev);
+
+ for (i = 0; i < 2; i++) {
+ if (ieee80211_register_hwmode(dev, &priv->modes[i])) {
+ kfree(priv->cached_vdcf);
+ ieee80211_free_hw(dev);
+ return NULL;
+ }
+ }
+
+ return dev;
+}
+EXPORT_SYMBOL_GPL(p54_init_common);
+
+void p54_free_common(struct ieee80211_hw *dev)
+{
+ struct p54_common *priv = dev->priv;
+ kfree(priv->iq_autocal);
+ kfree(priv->output_limit);
+ kfree(priv->curve_data);
+ kfree(priv->cached_vdcf);
+}
+EXPORT_SYMBOL_GPL(p54_free_common);
+
+static int __init p54_init(void)
+{
+ return 0;
+}
+
+static void __exit p54_exit(void)
+{
+}
+
+module_init(p54_init);
+module_exit(p54_exit);
diff --git a/drivers/net/wireless/p54common.h b/drivers/net/wireless/p54common.h
new file mode 100644
index 00000000000..a721334e20d
--- /dev/null
+++ b/drivers/net/wireless/p54common.h
@@ -0,0 +1,329 @@
+#ifndef PRISM54COMMON_H
+#define PRISM54COMMON_H
+
+/*
+ * Common code specific definitions for mac80211 Prism54 drivers
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ * Copyright (c) 2007, Christian Lamparter <chunkeey@web.de>
+ *
+ * Based on the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct bootrec {
+ __le32 code;
+ __le32 len;
+ u32 data[0];
+} __attribute__((packed));
+
+struct bootrec_exp_if {
+ __le16 role;
+ __le16 if_id;
+ __le16 variant;
+ __le16 btm_compat;
+ __le16 top_compat;
+} __attribute__((packed));
+
+#define BR_CODE_MIN 0x80000000
+#define BR_CODE_COMPONENT_ID 0x80000001
+#define BR_CODE_COMPONENT_VERSION 0x80000002
+#define BR_CODE_DEPENDENT_IF 0x80000003
+#define BR_CODE_EXPOSED_IF 0x80000004
+#define BR_CODE_DESCR 0x80000101
+#define BR_CODE_MAX 0x8FFFFFFF
+#define BR_CODE_END_OF_BRA 0xFF0000FF
+#define LEGACY_BR_CODE_END_OF_BRA 0xFFFFFFFF
+
+#define FW_FMAC 0x464d4143
+#define FW_LM86 0x4c4d3836
+#define FW_LM87 0x4c4d3837
+#define FW_LM20 0x4c4d3230
+
+/* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */
+
+struct pda_entry {
+ __le16 len; /* includes both code and data */
+ __le16 code;
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct eeprom_pda_wrap {
+ u32 magic;
+ u16 pad;
+ u16 len;
+ u32 arm_opcode;
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct pda_iq_autocal_entry {
+ __le16 freq;
+ __le16 iq_param[4];
+} __attribute__ ((packed));
+
+struct pda_channel_output_limit {
+ __le16 freq;
+ u8 val_bpsk;
+ u8 val_qpsk;
+ u8 val_16qam;
+ u8 val_64qam;
+ u8 rate_set_mask;
+ u8 rate_set_size;
+} __attribute__ ((packed));
+
+struct pda_pa_curve_data_sample_rev0 {
+ u8 rf_power;
+ u8 pa_detector;
+ u8 pcv;
+} __attribute__ ((packed));
+
+struct pda_pa_curve_data_sample_rev1 {
+ u8 rf_power;
+ u8 pa_detector;
+ u8 data_barker;
+ u8 data_bpsk;
+ u8 data_qpsk;
+ u8 data_16qam;
+ u8 data_64qam;
+ u8 padding;
+} __attribute__ ((packed));
+
+struct pda_pa_curve_data {
+ u8 cal_method_rev;
+ u8 channels;
+ u8 points_per_channel;
+ u8 padding;
+ u8 data[0];
+} __attribute__ ((packed));
+
+/*
+ * this defines the PDR codes used to build PDAs as defined in document
+ * number 553155. The current implementation mirrors version 1.1 of the
+ * document and lists only PDRs supported by the ARM platform.
+ */
+
+/* common and choice range (0x0000 - 0x0fff) */
+#define PDR_END 0x0000
+#define PDR_MANUFACTURING_PART_NUMBER 0x0001
+#define PDR_PDA_VERSION 0x0002
+#define PDR_NIC_SERIAL_NUMBER 0x0003
+
+#define PDR_MAC_ADDRESS 0x0101
+#define PDR_REGULATORY_DOMAIN_LIST 0x0103
+#define PDR_TEMPERATURE_TYPE 0x0107
+
+#define PDR_PRISM_PCI_IDENTIFIER 0x0402
+
+/* ARM range (0x1000 - 0x1fff) */
+#define PDR_COUNTRY_INFORMATION 0x1000
+#define PDR_INTERFACE_LIST 0x1001
+#define PDR_HARDWARE_PLATFORM_COMPONENT_ID 0x1002
+#define PDR_OEM_NAME 0x1003
+#define PDR_PRODUCT_NAME 0x1004
+#define PDR_UTF8_OEM_NAME 0x1005
+#define PDR_UTF8_PRODUCT_NAME 0x1006
+#define PDR_COUNTRY_LIST 0x1007
+#define PDR_DEFAULT_COUNTRY 0x1008
+
+#define PDR_ANTENNA_GAIN 0x1100
+
+#define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA 0x1901
+#define PDR_RSSI_LINEAR_APPROXIMATION 0x1902
+#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS 0x1903
+#define PDR_PRISM_PA_CAL_CURVE_DATA 0x1904
+#define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND 0x1905
+#define PDR_PRISM_ZIF_TX_IQ_CALIBRATION 0x1906
+#define PDR_REGULATORY_POWER_LIMITS 0x1907
+#define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED 0x1908
+#define PDR_RADIATED_TRANSMISSION_CORRECTION 0x1909
+#define PDR_PRISM_TX_IQ_CALIBRATION 0x190a
+
+/* reserved range (0x2000 - 0x7fff) */
+
+/* customer range (0x8000 - 0xffff) */
+#define PDR_BASEBAND_REGISTERS 0x8000
+#define PDR_PER_CHANNEL_BASEBAND_REGISTERS 0x8001
+
+/* stored in skb->cb */
+struct memrecord {
+ u32 start_addr;
+ u32 end_addr;
+ struct ieee80211_tx_control *control;
+};
+
+struct p54_eeprom_lm86 {
+ __le16 offset;
+ __le16 len;
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct p54_rx_hdr {
+ __le16 magic;
+ __le16 len;
+ __le16 freq;
+ u8 antenna;
+ u8 rate;
+ u8 rssi;
+ u8 quality;
+ u16 unknown2;
+ __le64 timestamp;
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct p54_frame_sent_hdr {
+ u8 status;
+ u8 retries;
+ __le16 ack_rssi;
+ __le16 seq;
+ u16 rate;
+} __attribute__ ((packed));
+
+struct p54_tx_control_allocdata {
+ u8 rateset[8];
+ u16 padding;
+ u8 wep_key_present;
+ u8 wep_key_len;
+ u8 wep_key[16];
+ __le32 frame_type;
+ u32 padding2;
+ __le16 magic4;
+ u8 antenna;
+ u8 output_power;
+ __le32 magic5;
+ u8 align[0];
+} __attribute__ ((packed));
+
+struct p54_tx_control_filter {
+ __le16 filter_type;
+ u8 dst[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ u8 antenna;
+ u8 debug;
+ __le32 magic3;
+ u8 rates[8]; // FIXME: what's this for?
+ __le32 rx_addr;
+ __le16 max_rx;
+ __le16 rxhw;
+ __le16 magic8;
+ __le16 magic9;
+} __attribute__ ((packed));
+
+struct p54_tx_control_channel {
+ __le16 magic1;
+ __le16 magic2;
+ u8 padding1[20];
+ struct pda_iq_autocal_entry iq_autocal;
+ u8 pa_points_per_curve;
+ u8 val_barker;
+ u8 val_bpsk;
+ u8 val_qpsk;
+ u8 val_16qam;
+ u8 val_64qam;
+ struct pda_pa_curve_data_sample_rev1 curve_data[0];
+ /* additional padding/data after curve_data */
+} __attribute__ ((packed));
+
+struct p54_tx_control_led {
+ __le16 mode;
+ __le16 led_temporary;
+ __le16 led_permanent;
+ __le16 duration;
+} __attribute__ ((packed));
+
+struct p54_tx_vdcf_queues {
+ __le16 aifs;
+ __le16 cwmin;
+ __le16 cwmax;
+ __le16 txop;
+} __attribute__ ((packed));
+
+struct p54_tx_control_vdcf {
+ u8 padding;
+ u8 slottime;
+ u8 magic1;
+ u8 magic2;
+ struct p54_tx_vdcf_queues queue[8];
+ u8 pad2[4];
+ __le16 frameburst;
+} __attribute__ ((packed));
+
+static const struct ieee80211_rate p54_rates[] = {
+ { .rate = 10,
+ .val = 0,
+ .val2 = 0x10,
+ .flags = IEEE80211_RATE_CCK_2 },
+ { .rate = 20,
+ .val = 1,
+ .val2 = 0x11,
+ .flags = IEEE80211_RATE_CCK_2 },
+ { .rate = 55,
+ .val = 2,
+ .val2 = 0x12,
+ .flags = IEEE80211_RATE_CCK_2 },
+ { .rate = 110,
+ .val = 3,
+ .val2 = 0x13,
+ .flags = IEEE80211_RATE_CCK_2 },
+ { .rate = 60,
+ .val = 4,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 90,
+ .val = 5,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 120,
+ .val = 6,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 180,
+ .val = 7,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 240,
+ .val = 8,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 360,
+ .val = 9,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 480,
+ .val = 10,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 540,
+ .val = 11,
+ .flags = IEEE80211_RATE_OFDM },
+};
+
+// TODO: just generate this..
+static const struct ieee80211_channel p54_channels[] = {
+ { .chan = 1,
+ .freq = 2412},
+ { .chan = 2,
+ .freq = 2417},
+ { .chan = 3,
+ .freq = 2422},
+ { .chan = 4,
+ .freq = 2427},
+ { .chan = 5,
+ .freq = 2432},
+ { .chan = 6,
+ .freq = 2437},
+ { .chan = 7,
+ .freq = 2442},
+ { .chan = 8,
+ .freq = 2447},
+ { .chan = 9,
+ .freq = 2452},
+ { .chan = 10,
+ .freq = 2457},
+ { .chan = 11,
+ .freq = 2462},
+ { .chan = 12,
+ .freq = 2467},
+ { .chan = 13,
+ .freq = 2472},
+ { .chan = 14,
+ .freq = 2484}
+};
+
+#endif /* PRISM54COMMON_H */
diff --git a/drivers/net/wireless/p54pci.c b/drivers/net/wireless/p54pci.c
new file mode 100644
index 00000000000..e9ecc663dc7
--- /dev/null
+++ b/drivers/net/wireless/p54pci.c
@@ -0,0 +1,691 @@
+
+/*
+ * Linux device driver for PCI based Prism54
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ *
+ * Based on the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jean-baptiste.note@m4x.org>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <net/mac80211.h>
+
+#include "p54.h"
+#include "p54pci.h"
+
+MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
+MODULE_DESCRIPTION("Prism54 PCI wireless driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("prism54pci");
+
+static struct pci_device_id p54p_table[] __devinitdata = {
+ /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
+ { PCI_DEVICE(0x1260, 0x3890) },
+ /* 3COM 3CRWE154G72 Wireless LAN adapter */
+ { PCI_DEVICE(0x10b7, 0x6001) },
+ /* Intersil PRISM Indigo Wireless LAN adapter */
+ { PCI_DEVICE(0x1260, 0x3877) },
+ /* Intersil PRISM Javelin/Xbow Wireless LAN adapter */
+ { PCI_DEVICE(0x1260, 0x3886) },
+};
+
+MODULE_DEVICE_TABLE(pci, p54p_table);
+
+static int p54p_upload_firmware(struct ieee80211_hw *dev)
+{
+ struct p54p_priv *priv = dev->priv;
+ const struct firmware *fw_entry = NULL;
+ __le32 reg;
+ int err;
+ u32 *data;
+ u32 remains, left, device_addr;
+
+ P54P_WRITE(int_enable, 0);
+ P54P_READ(int_enable);
+ udelay(10);
+
+ reg = P54P_READ(ctrl_stat);
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT);
+ P54P_WRITE(ctrl_stat, reg);
+ P54P_READ(ctrl_stat);
+ udelay(10);
+
+ reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET);
+ P54P_WRITE(ctrl_stat, reg);
+ wmb();
+ udelay(10);
+
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
+ P54P_WRITE(ctrl_stat, reg);
+ wmb();
+
+ mdelay(50);
+
+ err = request_firmware(&fw_entry, "isl3886", &priv->pdev->dev);
+ if (err) {
+ printk(KERN_ERR "%s (prism54pci): cannot find firmware "
+ "(isl3886)\n", pci_name(priv->pdev));
+ return err;
+ }
+
+ p54_parse_firmware(dev, fw_entry);
+
+ data = (u32 *) fw_entry->data;
+ remains = fw_entry->size;
+ device_addr = ISL38XX_DEV_FIRMWARE_ADDR;
+ while (remains) {
+ u32 i = 0;
+ left = min((u32)0x1000, remains);
+ P54P_WRITE(direct_mem_base, cpu_to_le32(device_addr));
+ P54P_READ(int_enable);
+
+ device_addr += 0x1000;
+ while (i < left) {
+ P54P_WRITE(direct_mem_win[i], *data++);
+ i += sizeof(u32);
+ }
+
+ remains -= left;
+ P54P_READ(int_enable);
+ }
+
+ release_firmware(fw_entry);
+
+ reg = P54P_READ(ctrl_stat);
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN);
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
+ reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT);
+ P54P_WRITE(ctrl_stat, reg);
+ P54P_READ(ctrl_stat);
+ udelay(10);
+
+ reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET);
+ P54P_WRITE(ctrl_stat, reg);
+ wmb();
+ udelay(10);
+
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
+ P54P_WRITE(ctrl_stat, reg);
+ wmb();
+ udelay(10);
+
+ return 0;
+}
+
+static irqreturn_t p54p_simple_interrupt(int irq, void *dev_id)
+{
+ struct p54p_priv *priv = (struct p54p_priv *) dev_id;
+ __le32 reg;
+
+ reg = P54P_READ(int_ident);
+ P54P_WRITE(int_ack, reg);
+
+ if (reg & P54P_READ(int_enable))
+ complete(&priv->boot_comp);
+
+ return IRQ_HANDLED;
+}
+
+static int p54p_read_eeprom(struct ieee80211_hw *dev)
+{
+ struct p54p_priv *priv = dev->priv;
+ int err;
+ struct p54_control_hdr *hdr;
+ void *eeprom;
+ dma_addr_t rx_mapping, tx_mapping;
+ u16 alen;
+
+ init_completion(&priv->boot_comp);
+ err = request_irq(priv->pdev->irq, &p54p_simple_interrupt,
+ IRQF_SHARED, "prism54pci", priv);
+ if (err) {
+ printk(KERN_ERR "%s (prism54pci): failed to register IRQ handler\n",
+ pci_name(priv->pdev));
+ return err;
+ }
+
+ eeprom = kmalloc(0x2010 + EEPROM_READBACK_LEN, GFP_KERNEL);
+ if (!eeprom) {
+ printk(KERN_ERR "%s (prism54pci): no memory for eeprom!\n",
+ pci_name(priv->pdev));
+ err = -ENOMEM;
+ goto out;
+ }
+
+ memset(priv->ring_control, 0, sizeof(*priv->ring_control));
+ P54P_WRITE(ring_control_base, priv->ring_control_dma);
+ P54P_READ(ring_control_base);
+ udelay(10);
+
+ P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT));
+ P54P_READ(int_enable);
+ udelay(10);
+
+ P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
+
+ if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
+ printk(KERN_ERR "%s (prism54pci): Cannot boot firmware!\n",
+ pci_name(priv->pdev));
+ err = -EINVAL;
+ goto out;
+ }
+
+ P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE));
+ P54P_READ(int_enable);
+
+ hdr = eeprom + 0x2010;
+ p54_fill_eeprom_readback(hdr);
+ hdr->req_id = cpu_to_le32(priv->common.rx_start);
+
+ rx_mapping = pci_map_single(priv->pdev, eeprom,
+ 0x2010, PCI_DMA_FROMDEVICE);
+ tx_mapping = pci_map_single(priv->pdev, (void *)hdr,
+ EEPROM_READBACK_LEN, PCI_DMA_TODEVICE);
+
+ priv->ring_control->rx_mgmt[0].host_addr = cpu_to_le32(rx_mapping);
+ priv->ring_control->rx_mgmt[0].len = cpu_to_le16(0x2010);
+ priv->ring_control->tx_data[0].host_addr = cpu_to_le32(tx_mapping);
+ priv->ring_control->tx_data[0].device_addr = hdr->req_id;
+ priv->ring_control->tx_data[0].len = cpu_to_le16(EEPROM_READBACK_LEN);
+
+ priv->ring_control->host_idx[2] = cpu_to_le32(1);
+ priv->ring_control->host_idx[1] = cpu_to_le32(1);
+
+ wmb();
+ mdelay(100);
+ P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
+
+ wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ);
+ wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ);
+
+ pci_unmap_single(priv->pdev, tx_mapping,
+ EEPROM_READBACK_LEN, PCI_DMA_TODEVICE);
+ pci_unmap_single(priv->pdev, rx_mapping,
+ 0x2010, PCI_DMA_FROMDEVICE);
+
+ alen = le16_to_cpu(priv->ring_control->rx_mgmt[0].len);
+ if (le32_to_cpu(priv->ring_control->device_idx[2]) != 1 ||
+ alen < 0x10) {
+ printk(KERN_ERR "%s (prism54pci): Cannot read eeprom!\n",
+ pci_name(priv->pdev));
+ err = -EINVAL;
+ goto out;
+ }
+
+ p54_parse_eeprom(dev, (u8 *)eeprom + 0x10, alen - 0x10);
+
+ out:
+ kfree(eeprom);
+ P54P_WRITE(int_enable, 0);
+ P54P_READ(int_enable);
+ udelay(10);
+ free_irq(priv->pdev->irq, priv);
+ P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
+ return err;
+}
+
+static void p54p_refill_rx_ring(struct ieee80211_hw *dev)
+{
+ struct p54p_priv *priv = dev->priv;
+ u32 limit, host_idx, idx;
+
+ host_idx = le32_to_cpu(priv->ring_control->host_idx[0]);
+ limit = host_idx;
+ limit -= le32_to_cpu(priv->ring_control->device_idx[0]);
+ limit = ARRAY_SIZE(priv->ring_control->rx_data) - limit;
+
+ idx = host_idx % ARRAY_SIZE(priv->ring_control->rx_data);
+ while (limit-- > 1) {
+ struct p54p_desc *desc = &priv->ring_control->rx_data[idx];
+
+ if (!desc->host_addr) {
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+ skb = dev_alloc_skb(MAX_RX_SIZE);
+ if (!skb)
+ break;
+
+ mapping = pci_map_single(priv->pdev,
+ skb_tail_pointer(skb),
+ MAX_RX_SIZE,
+ PCI_DMA_FROMDEVICE);
+ desc->host_addr = cpu_to_le32(mapping);
+ desc->device_addr = 0; // FIXME: necessary?
+ desc->len = cpu_to_le16(MAX_RX_SIZE);
+ desc->flags = 0;
+ priv->rx_buf[idx] = skb;
+ }
+
+ idx++;
+ host_idx++;
+ idx %= ARRAY_SIZE(priv->ring_control->rx_data);
+ }
+
+ wmb();
+ priv->ring_control->host_idx[0] = cpu_to_le32(host_idx);
+}
+
+static irqreturn_t p54p_interrupt(int irq, void *dev_id)
+{
+ struct ieee80211_hw *dev = dev_id;
+ struct p54p_priv *priv = dev->priv;
+ __le32 reg;
+
+ spin_lock(&priv->lock);
+ reg = P54P_READ(int_ident);
+ if (unlikely(reg == 0xFFFFFFFF)) {
+ spin_unlock(&priv->lock);
+ return IRQ_HANDLED;
+ }
+
+ P54P_WRITE(int_ack, reg);
+
+ reg &= P54P_READ(int_enable);
+
+ if (reg & cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)) {
+ struct p54p_desc *desc;
+ u32 idx, i;
+ i = priv->tx_idx;
+ i %= ARRAY_SIZE(priv->ring_control->tx_data);
+ priv->tx_idx = idx = le32_to_cpu(priv->ring_control->device_idx[1]);
+ idx %= ARRAY_SIZE(priv->ring_control->tx_data);
+
+ while (i != idx) {
+ desc = &priv->ring_control->tx_data[i];
+ if (priv->tx_buf[i]) {
+ kfree(priv->tx_buf[i]);
+ priv->tx_buf[i] = NULL;
+ }
+
+ pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr),
+ le16_to_cpu(desc->len), PCI_DMA_TODEVICE);
+
+ desc->host_addr = 0;
+ desc->device_addr = 0;
+ desc->len = 0;
+ desc->flags = 0;
+
+ i++;
+ i %= ARRAY_SIZE(priv->ring_control->tx_data);
+ }
+
+ i = priv->rx_idx;
+ i %= ARRAY_SIZE(priv->ring_control->rx_data);
+ priv->rx_idx = idx = le32_to_cpu(priv->ring_control->device_idx[0]);
+ idx %= ARRAY_SIZE(priv->ring_control->rx_data);
+ while (i != idx) {
+ u16 len;
+ struct sk_buff *skb;
+ desc = &priv->ring_control->rx_data[i];
+ len = le16_to_cpu(desc->len);
+ skb = priv->rx_buf[i];
+
+ skb_put(skb, len);
+
+ if (p54_rx(dev, skb)) {
+ pci_unmap_single(priv->pdev,
+ le32_to_cpu(desc->host_addr),
+ MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+
+ priv->rx_buf[i] = NULL;
+ desc->host_addr = 0;
+ } else {
+ skb_trim(skb, 0);
+ desc->len = cpu_to_le16(MAX_RX_SIZE);
+ }
+
+ i++;
+ i %= ARRAY_SIZE(priv->ring_control->rx_data);
+ }
+
+ p54p_refill_rx_ring(dev);
+
+ wmb();
+ P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
+ } else if (reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT))
+ complete(&priv->boot_comp);
+
+ spin_unlock(&priv->lock);
+
+ return reg ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void p54p_tx(struct ieee80211_hw *dev, struct p54_control_hdr *data,
+ size_t len, int free_on_tx)
+{
+ struct p54p_priv *priv = dev->priv;
+ unsigned long flags;
+ struct p54p_desc *desc;
+ dma_addr_t mapping;
+ u32 device_idx, idx, i;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ device_idx = le32_to_cpu(priv->ring_control->device_idx[1]);
+ idx = le32_to_cpu(priv->ring_control->host_idx[1]);
+ i = idx % ARRAY_SIZE(priv->ring_control->tx_data);
+
+ mapping = pci_map_single(priv->pdev, data, len, PCI_DMA_TODEVICE);
+ desc = &priv->ring_control->tx_data[i];
+ desc->host_addr = cpu_to_le32(mapping);
+ desc->device_addr = data->req_id;
+ desc->len = cpu_to_le16(len);
+ desc->flags = 0;
+
+ wmb();
+ priv->ring_control->host_idx[1] = cpu_to_le32(idx + 1);
+
+ if (free_on_tx)
+ priv->tx_buf[i] = data;
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
+ P54P_READ(dev_int);
+
+ /* FIXME: unlikely to happen because the device usually runs out of
+ memory before we fill the ring up, but we can make it impossible */
+ if (idx - device_idx > ARRAY_SIZE(priv->ring_control->tx_data) - 2)
+ printk(KERN_INFO "%s: tx overflow.\n", wiphy_name(dev->wiphy));
+}
+
+static int p54p_open(struct ieee80211_hw *dev)
+{
+ struct p54p_priv *priv = dev->priv;
+ int err;
+
+ init_completion(&priv->boot_comp);
+ err = request_irq(priv->pdev->irq, &p54p_interrupt,
+ IRQF_SHARED, "prism54pci", dev);
+ if (err) {
+ printk(KERN_ERR "%s: failed to register IRQ handler\n",
+ wiphy_name(dev->wiphy));
+ return err;
+ }
+
+ memset(priv->ring_control, 0, sizeof(*priv->ring_control));
+ priv->rx_idx = priv->tx_idx = 0;
+ p54p_refill_rx_ring(dev);
+
+ p54p_upload_firmware(dev);
+
+ P54P_WRITE(ring_control_base, priv->ring_control_dma);
+ P54P_READ(ring_control_base);
+ wmb();
+ udelay(10);
+
+ P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT));
+ P54P_READ(int_enable);
+ wmb();
+ udelay(10);
+
+ P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
+ P54P_READ(dev_int);
+
+ if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
+ printk(KERN_ERR "%s: Cannot boot firmware!\n",
+ wiphy_name(dev->wiphy));
+ free_irq(priv->pdev->irq, dev);
+ return -ETIMEDOUT;
+ }
+
+ P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE));
+ P54P_READ(int_enable);
+ wmb();
+ udelay(10);
+
+ P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
+ P54P_READ(dev_int);
+ wmb();
+ udelay(10);
+
+ return 0;
+}
+
+static void p54p_stop(struct ieee80211_hw *dev)
+{
+ struct p54p_priv *priv = dev->priv;
+ unsigned int i;
+ struct p54p_desc *desc;
+
+ P54P_WRITE(int_enable, 0);
+ P54P_READ(int_enable);
+ udelay(10);
+
+ free_irq(priv->pdev->irq, dev);
+
+ P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
+
+ for (i = 0; i < ARRAY_SIZE(priv->rx_buf); i++) {
+ desc = &priv->ring_control->rx_data[i];
+ if (desc->host_addr)
+ pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr),
+ MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+ kfree_skb(priv->rx_buf[i]);
+ priv->rx_buf[i] = NULL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(priv->tx_buf); i++) {
+ desc = &priv->ring_control->tx_data[i];
+ if (desc->host_addr)
+ pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr),
+ le16_to_cpu(desc->len), PCI_DMA_TODEVICE);
+
+ kfree(priv->tx_buf[i]);
+ priv->tx_buf[i] = NULL;
+ }
+
+ memset(priv->ring_control, 0, sizeof(*priv->ring_control));
+}
+
+static int __devinit p54p_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct p54p_priv *priv;
+ struct ieee80211_hw *dev;
+ unsigned long mem_addr, mem_len;
+ int err;
+ DECLARE_MAC_BUF(mac);
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR "%s (prism54pci): Cannot enable new PCI device\n",
+ pci_name(pdev));
+ return err;
+ }
+
+ mem_addr = pci_resource_start(pdev, 0);
+ mem_len = pci_resource_len(pdev, 0);
+ if (mem_len < sizeof(struct p54p_csr)) {
+ printk(KERN_ERR "%s (prism54pci): Too short PCI resources\n",
+ pci_name(pdev));
+ pci_disable_device(pdev);
+ return err;
+ }
+
+ err = pci_request_regions(pdev, "prism54pci");
+ if (err) {
+ printk(KERN_ERR "%s (prism54pci): Cannot obtain PCI resources\n",
+ pci_name(pdev));
+ return err;
+ }
+
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) ||
+ pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ printk(KERN_ERR "%s (prism54pci): No suitable DMA available\n",
+ pci_name(pdev));
+ goto err_free_reg;
+ }
+
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+
+ pci_write_config_byte(pdev, 0x40, 0);
+ pci_write_config_byte(pdev, 0x41, 0);
+
+ dev = p54_init_common(sizeof(*priv));
+ if (!dev) {
+ printk(KERN_ERR "%s (prism54pci): ieee80211 alloc failed\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto err_free_reg;
+ }
+
+ priv = dev->priv;
+ priv->pdev = pdev;
+
+ SET_IEEE80211_DEV(dev, &pdev->dev);
+ pci_set_drvdata(pdev, dev);
+
+ priv->map = ioremap(mem_addr, mem_len);
+ if (!priv->map) {
+ printk(KERN_ERR "%s (prism54pci): Cannot map device memory\n",
+ pci_name(pdev));
+ err = -EINVAL; // TODO: use a better error code?
+ goto err_free_dev;
+ }
+
+ priv->ring_control = pci_alloc_consistent(pdev, sizeof(*priv->ring_control),
+ &priv->ring_control_dma);
+ if (!priv->ring_control) {
+ printk(KERN_ERR "%s (prism54pci): Cannot allocate rings\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto err_iounmap;
+ }
+ memset(priv->ring_control, 0, sizeof(*priv->ring_control));
+
+ err = p54p_upload_firmware(dev);
+ if (err)
+ goto err_free_desc;
+
+ err = p54p_read_eeprom(dev);
+ if (err)
+ goto err_free_desc;
+
+ priv->common.open = p54p_open;
+ priv->common.stop = p54p_stop;
+ priv->common.tx = p54p_tx;
+
+ spin_lock_init(&priv->lock);
+
+ err = ieee80211_register_hw(dev);
+ if (err) {
+ printk(KERN_ERR "%s (prism54pci): Cannot register netdevice\n",
+ pci_name(pdev));
+ goto err_free_common;
+ }
+
+ printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n",
+ wiphy_name(dev->wiphy),
+ print_mac(mac, dev->wiphy->perm_addr),
+ priv->common.version);
+
+ return 0;
+
+ err_free_common:
+ p54_free_common(dev);
+
+ err_free_desc:
+ pci_free_consistent(pdev, sizeof(*priv->ring_control),
+ priv->ring_control, priv->ring_control_dma);
+
+ err_iounmap:
+ iounmap(priv->map);
+
+ err_free_dev:
+ pci_set_drvdata(pdev, NULL);
+ ieee80211_free_hw(dev);
+
+ err_free_reg:
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ return err;
+}
+
+static void __devexit p54p_remove(struct pci_dev *pdev)
+{
+ struct ieee80211_hw *dev = pci_get_drvdata(pdev);
+ struct p54p_priv *priv;
+
+ if (!dev)
+ return;
+
+ ieee80211_unregister_hw(dev);
+ priv = dev->priv;
+ pci_free_consistent(pdev, sizeof(*priv->ring_control),
+ priv->ring_control, priv->ring_control_dma);
+ p54_free_common(dev);
+ iounmap(priv->map);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ ieee80211_free_hw(dev);
+}
+
+#ifdef CONFIG_PM
+static int p54p_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct ieee80211_hw *dev = pci_get_drvdata(pdev);
+ struct p54p_priv *priv = dev->priv;
+
+ if (priv->common.mode != IEEE80211_IF_TYPE_MGMT) {
+ ieee80211_stop_queues(dev);
+ p54p_stop(dev);
+ }
+
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
+
+static int p54p_resume(struct pci_dev *pdev)
+{
+ struct ieee80211_hw *dev = pci_get_drvdata(pdev);
+ struct p54p_priv *priv = dev->priv;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ if (priv->common.mode != IEEE80211_IF_TYPE_MGMT) {
+ p54p_open(dev);
+ ieee80211_start_queues(dev);
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static struct pci_driver p54p_driver = {
+ .name = "prism54pci",
+ .id_table = p54p_table,
+ .probe = p54p_probe,
+ .remove = __devexit_p(p54p_remove),
+#ifdef CONFIG_PM
+ .suspend = p54p_suspend,
+ .resume = p54p_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init p54p_init(void)
+{
+ return pci_register_driver(&p54p_driver);
+}
+
+static void __exit p54p_exit(void)
+{
+ pci_unregister_driver(&p54p_driver);
+}
+
+module_init(p54p_init);
+module_exit(p54p_exit);
diff --git a/drivers/net/wireless/p54pci.h b/drivers/net/wireless/p54pci.h
new file mode 100644
index 00000000000..52feb597dc4
--- /dev/null
+++ b/drivers/net/wireless/p54pci.h
@@ -0,0 +1,106 @@
+#ifndef PRISM54PCI_H
+#define PRISM54PCI_H
+
+/*
+ * Defines for PCI based mac80211 Prism54 driver
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ *
+ * Based on the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* Device Interrupt register bits */
+#define ISL38XX_DEV_INT_RESET 0x0001
+#define ISL38XX_DEV_INT_UPDATE 0x0002
+#define ISL38XX_DEV_INT_WAKEUP 0x0008
+#define ISL38XX_DEV_INT_SLEEP 0x0010
+#define ISL38XX_DEV_INT_ABORT 0x0020
+/* these two only used in USB */
+#define ISL38XX_DEV_INT_DATA 0x0040
+#define ISL38XX_DEV_INT_MGMT 0x0080
+
+#define ISL38XX_DEV_INT_PCIUART_CTS 0x4000
+#define ISL38XX_DEV_INT_PCIUART_DR 0x8000
+
+/* Interrupt Identification/Acknowledge/Enable register bits */
+#define ISL38XX_INT_IDENT_UPDATE 0x0002
+#define ISL38XX_INT_IDENT_INIT 0x0004
+#define ISL38XX_INT_IDENT_WAKEUP 0x0008
+#define ISL38XX_INT_IDENT_SLEEP 0x0010
+#define ISL38XX_INT_IDENT_PCIUART_CTS 0x4000
+#define ISL38XX_INT_IDENT_PCIUART_DR 0x8000
+
+/* Control/Status register bits */
+#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200
+#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000
+#define ISL38XX_CTRL_STAT_RESET 0x10000000
+#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000
+#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000
+#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000
+
+struct p54p_csr {
+ __le32 dev_int;
+ u8 unused_1[12];
+ __le32 int_ident;
+ __le32 int_ack;
+ __le32 int_enable;
+ u8 unused_2[4];
+ union {
+ __le32 ring_control_base;
+ __le32 gen_purp_com[2];
+ };
+ u8 unused_3[8];
+ __le32 direct_mem_base;
+ u8 unused_4[44];
+ __le32 dma_addr;
+ __le32 dma_len;
+ __le32 dma_ctrl;
+ u8 unused_5[12];
+ __le32 ctrl_stat;
+ u8 unused_6[1924];
+ u8 cardbus_cis[0x800];
+ u8 direct_mem_win[0x1000];
+} __attribute__ ((packed));
+
+/* usb backend only needs the register defines above */
+#ifndef PRISM54USB_H
+struct p54p_desc {
+ __le32 host_addr;
+ __le32 device_addr;
+ __le16 len;
+ __le16 flags;
+} __attribute__ ((packed));
+
+struct p54p_ring_control {
+ __le32 host_idx[4];
+ __le32 device_idx[4];
+ struct p54p_desc rx_data[8];
+ struct p54p_desc tx_data[32];
+ struct p54p_desc rx_mgmt[4];
+ struct p54p_desc tx_mgmt[4];
+} __attribute__ ((packed));
+
+#define P54P_READ(r) __raw_readl(&priv->map->r)
+#define P54P_WRITE(r, val) __raw_writel((__force u32)(val), &priv->map->r)
+
+struct p54p_priv {
+ struct p54_common common;
+ struct pci_dev *pdev;
+ struct p54p_csr __iomem *map;
+
+ spinlock_t lock;
+ struct p54p_ring_control *ring_control;
+ dma_addr_t ring_control_dma;
+ u32 rx_idx, tx_idx;
+ struct sk_buff *rx_buf[8];
+ void *tx_buf[32];
+ struct completion boot_comp;
+};
+
+#endif /* PRISM54USB_H */
+#endif /* PRISM54PCI_H */
diff --git a/drivers/net/wireless/p54usb.c b/drivers/net/wireless/p54usb.c
new file mode 100644
index 00000000000..7446c39ce5d
--- /dev/null
+++ b/drivers/net/wireless/p54usb.c
@@ -0,0 +1,906 @@
+
+/*
+ * Linux device driver for USB based Prism54
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ *
+ * Based on the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/pci.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/crc32.h>
+#include <net/mac80211.h>
+
+#include "p54.h"
+#include "p54usb.h"
+
+MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
+MODULE_DESCRIPTION("Prism54 USB wireless driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("prism54usb");
+
+static struct usb_device_id p54u_table[] __devinitdata = {
+ /* Version 1 devices (pci chip + net2280) */
+ {USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */
+ {USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */
+ {USB_DEVICE(0x083a, 0x4501)}, /* Accton 802.11g WN4501 USB */
+ {USB_DEVICE(0x083a, 0x4502)}, /* Siemens Gigaset USB Adapter */
+ {USB_DEVICE(0x0846, 0x4200)}, /* Netgear WG121 */
+ {USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */
+ {USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */
+ {USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */
+ {USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */
+ {USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */
+ {USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */
+ {USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */
+ {USB_DEVICE(0x2001, 0x3703)}, /* DLink DWL-G122 */
+ {USB_DEVICE(0x5041, 0x2234)}, /* Linksys WUSB54G */
+ {USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */
+
+ /* Version 2 devices (3887) */
+ {USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */
+ {USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */
+ {USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */
+ {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
+ {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
+ {USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */
+ {USB_DEVICE(0x0915, 0x2000)}, /* Cohiba Proto board */
+ {USB_DEVICE(0x0915, 0x2002)}, /* Cohiba Proto board */
+ {USB_DEVICE(0x0baf, 0x0118)}, /* U.S. Robotics U5 802.11g Adapter*/
+ {USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/
+ {USB_DEVICE(0x0cde, 0x0006)}, /* Medion MD40900 */
+ {USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */
+ {USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */
+ {USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */
+ {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
+ {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
+ {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */
+ {USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, p54u_table);
+
+static void p54u_rx_cb(struct urb *urb)
+{
+ struct sk_buff *skb = (struct sk_buff *) urb->context;
+ struct p54u_rx_info *info = (struct p54u_rx_info *)skb->cb;
+ struct ieee80211_hw *dev = info->dev;
+ struct p54u_priv *priv = dev->priv;
+
+ if (unlikely(urb->status)) {
+ info->urb = NULL;
+ usb_free_urb(urb);
+ return;
+ }
+
+ skb_unlink(skb, &priv->rx_queue);
+ skb_put(skb, urb->actual_length);
+ if (!priv->hw_type)
+ skb_pull(skb, sizeof(struct net2280_tx_hdr));
+
+ if (p54_rx(dev, skb)) {
+ skb = dev_alloc_skb(MAX_RX_SIZE);
+ if (unlikely(!skb)) {
+ usb_free_urb(urb);
+ /* TODO check rx queue length and refill *somewhere* */
+ return;
+ }
+
+ info = (struct p54u_rx_info *) skb->cb;
+ info->urb = urb;
+ info->dev = dev;
+ urb->transfer_buffer = skb_tail_pointer(skb);
+ urb->context = skb;
+ skb_queue_tail(&priv->rx_queue, skb);
+ } else {
+ skb_trim(skb, 0);
+ skb_queue_tail(&priv->rx_queue, skb);
+ }
+
+ usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static void p54u_tx_cb(struct urb *urb)
+{
+ usb_free_urb(urb);
+}
+
+static void p54u_tx_free_cb(struct urb *urb)
+{
+ kfree(urb->transfer_buffer);
+ usb_free_urb(urb);
+}
+
+static int p54u_init_urbs(struct ieee80211_hw *dev)
+{
+ struct p54u_priv *priv = dev->priv;
+ struct urb *entry;
+ struct sk_buff *skb;
+ struct p54u_rx_info *info;
+
+ while (skb_queue_len(&priv->rx_queue) < 32) {
+ skb = __dev_alloc_skb(MAX_RX_SIZE, GFP_KERNEL);
+ if (!skb)
+ break;
+ entry = usb_alloc_urb(0, GFP_KERNEL);
+ if (!entry) {
+ kfree_skb(skb);
+ break;
+ }
+ usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), skb_tail_pointer(skb), MAX_RX_SIZE, p54u_rx_cb, skb);
+ info = (struct p54u_rx_info *) skb->cb;
+ info->urb = entry;
+ info->dev = dev;
+ skb_queue_tail(&priv->rx_queue, skb);
+ usb_submit_urb(entry, GFP_KERNEL);
+ }
+
+ return 0;
+}
+
+static void p54u_free_urbs(struct ieee80211_hw *dev)
+{
+ struct p54u_priv *priv = dev->priv;
+ struct p54u_rx_info *info;
+ struct sk_buff *skb;
+
+ while ((skb = skb_dequeue(&priv->rx_queue))) {
+ info = (struct p54u_rx_info *) skb->cb;
+ if (!info->urb)
+ continue;
+
+ usb_kill_urb(info->urb);
+ kfree_skb(skb);
+ }
+}
+
+static void p54u_tx_3887(struct ieee80211_hw *dev, struct p54_control_hdr *data,
+ size_t len, int free_on_tx)
+{
+ struct p54u_priv *priv = dev->priv;
+ struct urb *addr_urb, *data_urb;
+
+ addr_urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!addr_urb)
+ return;
+
+ data_urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!data_urb) {
+ usb_free_urb(addr_urb);
+ return;
+ }
+
+ usb_fill_bulk_urb(addr_urb, priv->udev,
+ usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), &data->req_id,
+ sizeof(data->req_id), p54u_tx_cb, dev);
+ usb_fill_bulk_urb(data_urb, priv->udev,
+ usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), data, len,
+ free_on_tx ? p54u_tx_free_cb : p54u_tx_cb, dev);
+
+ usb_submit_urb(addr_urb, GFP_ATOMIC);
+ usb_submit_urb(data_urb, GFP_ATOMIC);
+}
+
+static void p54u_tx_net2280(struct ieee80211_hw *dev, struct p54_control_hdr *data,
+ size_t len, int free_on_tx)
+{
+ struct p54u_priv *priv = dev->priv;
+ struct urb *int_urb, *data_urb;
+ struct net2280_tx_hdr *hdr;
+ struct net2280_reg_write *reg;
+
+ reg = kmalloc(sizeof(*reg), GFP_ATOMIC);
+ if (!reg)
+ return;
+
+ int_urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!int_urb) {
+ kfree(reg);
+ return;
+ }
+
+ data_urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!data_urb) {
+ kfree(reg);
+ usb_free_urb(int_urb);
+ return;
+ }
+
+ reg->port = cpu_to_le16(NET2280_DEV_U32);
+ reg->addr = cpu_to_le32(P54U_DEV_BASE);
+ reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA);
+
+ len += sizeof(*data);
+ hdr = (void *)data - sizeof(*hdr);
+ memset(hdr, 0, sizeof(*hdr));
+ hdr->device_addr = data->req_id;
+ hdr->len = cpu_to_le16(len);
+
+ usb_fill_bulk_urb(int_urb, priv->udev,
+ usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg),
+ p54u_tx_free_cb, dev);
+ usb_submit_urb(int_urb, GFP_ATOMIC);
+
+ usb_fill_bulk_urb(data_urb, priv->udev,
+ usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), hdr, len + sizeof(*hdr),
+ free_on_tx ? p54u_tx_free_cb : p54u_tx_cb, dev);
+ usb_submit_urb(data_urb, GFP_ATOMIC);
+}
+
+static int p54u_write(struct p54u_priv *priv,
+ struct net2280_reg_write *buf,
+ enum net2280_op_type type,
+ __le32 addr, __le32 val)
+{
+ unsigned int ep;
+ int alen;
+
+ if (type & 0x0800)
+ ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV);
+ else
+ ep = usb_sndbulkpipe(priv->udev, P54U_PIPE_BRG);
+
+ buf->port = cpu_to_le16(type);
+ buf->addr = addr;
+ buf->val = val;
+
+ return usb_bulk_msg(priv->udev, ep, buf, sizeof(*buf), &alen, 1000);
+}
+
+static int p54u_read(struct p54u_priv *priv, void *buf,
+ enum net2280_op_type type,
+ __le32 addr, __le32 *val)
+{
+ struct net2280_reg_read *read = buf;
+ __le32 *reg = buf;
+ unsigned int ep;
+ int alen, err;
+
+ if (type & 0x0800)
+ ep = P54U_PIPE_DEV;
+ else
+ ep = P54U_PIPE_BRG;
+
+ read->port = cpu_to_le16(type);
+ read->addr = addr;
+
+ err = usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep),
+ read, sizeof(*read), &alen, 1000);
+ if (err)
+ return err;
+
+ err = usb_bulk_msg(priv->udev, usb_rcvbulkpipe(priv->udev, ep),
+ reg, sizeof(*reg), &alen, 1000);
+ if (err)
+ return err;
+
+ *val = *reg;
+ return 0;
+}
+
+static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep,
+ void *data, size_t len)
+{
+ int alen;
+ return usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, ep),
+ data, len, &alen, 2000);
+}
+
+static int p54u_read_eeprom(struct ieee80211_hw *dev)
+{
+ struct p54u_priv *priv = dev->priv;
+ void *buf;
+ struct p54_control_hdr *hdr;
+ int err, alen;
+ size_t offset = priv->hw_type ? 0x10 : 0x20;
+
+ buf = kmalloc(0x2020, GFP_KERNEL);
+ if (!buf) {
+ printk(KERN_ERR "prism54usb: cannot allocate memory for"
+ "eeprom readback!\n");
+ return -ENOMEM;
+ }
+
+ if (priv->hw_type) {
+ *((u32 *) buf) = priv->common.rx_start;
+ err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32));
+ if (err) {
+ printk(KERN_ERR "prism54usb: addr send failed\n");
+ goto fail;
+ }
+ } else {
+ struct net2280_reg_write *reg = buf;
+ reg->port = cpu_to_le16(NET2280_DEV_U32);
+ reg->addr = cpu_to_le32(P54U_DEV_BASE);
+ reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA);
+ err = p54u_bulk_msg(priv, P54U_PIPE_DEV, buf, sizeof(*reg));
+ if (err) {
+ printk(KERN_ERR "prism54usb: dev_int send failed\n");
+ goto fail;
+ }
+ }
+
+ hdr = buf + priv->common.tx_hdr_len;
+ p54_fill_eeprom_readback(hdr);
+ hdr->req_id = cpu_to_le32(priv->common.rx_start);
+ if (priv->common.tx_hdr_len) {
+ struct net2280_tx_hdr *tx_hdr = buf;
+ tx_hdr->device_addr = hdr->req_id;
+ tx_hdr->len = cpu_to_le16(EEPROM_READBACK_LEN);
+ }
+
+ /* we can just pretend to send 0x2000 bytes of nothing in the headers */
+ err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf,
+ EEPROM_READBACK_LEN + priv->common.tx_hdr_len);
+ if (err) {
+ printk(KERN_ERR "prism54usb: eeprom req send failed\n");
+ goto fail;
+ }
+
+ err = usb_bulk_msg(priv->udev,
+ usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA),
+ buf, 0x2020, &alen, 1000);
+ if (!err && alen > offset) {
+ p54_parse_eeprom(dev, (u8 *)buf + offset, alen - offset);
+ } else {
+ printk(KERN_ERR "prism54usb: eeprom read failed!\n");
+ err = -EINVAL;
+ goto fail;
+ }
+
+ fail:
+ kfree(buf);
+ return err;
+}
+
+static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
+{
+ static char start_string[] = "~~~~<\r";
+ struct p54u_priv *priv = dev->priv;
+ const struct firmware *fw_entry = NULL;
+ int err, alen;
+ u8 carry = 0;
+ u8 *buf, *tmp, *data;
+ unsigned int left, remains, block_size;
+ struct x2_header *hdr;
+ unsigned long timeout;
+
+ tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL);
+ if (!buf) {
+ printk(KERN_ERR "p54usb: cannot allocate firmware upload buffer!\n");
+ err = -ENOMEM;
+ goto err_bufalloc;
+ }
+
+ memcpy(buf, start_string, 4);
+ err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 4);
+ if (err) {
+ printk(KERN_ERR "p54usb: reset failed! (%d)\n", err);
+ goto err_reset;
+ }
+
+ err = request_firmware(&fw_entry, "isl3887usb_bare", &priv->udev->dev);
+ if (err) {
+ printk(KERN_ERR "p54usb: cannot find firmware (isl3887usb_bare)!\n");
+ goto err_req_fw_failed;
+ }
+
+ p54_parse_firmware(dev, fw_entry);
+
+ left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size);
+ strcpy(buf, start_string);
+ left -= strlen(start_string);
+ tmp += strlen(start_string);
+
+ data = fw_entry->data;
+ remains = fw_entry->size;
+
+ hdr = (struct x2_header *)(buf + strlen(start_string));
+ memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE);
+ hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR);
+ hdr->fw_length = cpu_to_le32(fw_entry->size);
+ hdr->crc = cpu_to_le32(~crc32_le(~0, (void *)&hdr->fw_load_addr,
+ sizeof(u32)*2));
+ left -= sizeof(*hdr);
+ tmp += sizeof(*hdr);
+
+ while (remains) {
+ while (left--) {
+ if (carry) {
+ *tmp++ = carry;
+ carry = 0;
+ remains--;
+ continue;
+ }
+ switch (*data) {
+ case '~':
+ *tmp++ = '}';
+ carry = '^';
+ break;
+ case '}':
+ *tmp++ = '}';
+ carry = ']';
+ break;
+ default:
+ *tmp++ = *data;
+ remains--;
+ break;
+ }
+ data++;
+ }
+
+ err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size);
+ if (err) {
+ printk(KERN_ERR "prism54usb: firmware upload failed!\n");
+ goto err_upload_failed;
+ }
+
+ tmp = buf;
+ left = block_size = min((unsigned int)P54U_FW_BLOCK, remains);
+ }
+
+ *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size));
+ err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32));
+ if (err) {
+ printk(KERN_ERR "prism54usb: firmware upload failed!\n");
+ goto err_upload_failed;
+ }
+
+ timeout = jiffies + msecs_to_jiffies(1000);
+ while (!(err = usb_bulk_msg(priv->udev,
+ usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) {
+ if (alen > 2 && !memcmp(buf, "OK", 2))
+ break;
+
+ if (alen > 5 && !memcmp(buf, "ERROR", 5)) {
+ printk(KERN_INFO "prism54usb: firmware upload failed!\n");
+ err = -EINVAL;
+ break;
+ }
+
+ if (time_after(jiffies, timeout)) {
+ printk(KERN_ERR "prism54usb: firmware boot timed out!\n");
+ err = -ETIMEDOUT;
+ break;
+ }
+ }
+ if (err)
+ goto err_upload_failed;
+
+ buf[0] = 'g';
+ buf[1] = '\r';
+ err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2);
+ if (err) {
+ printk(KERN_ERR "prism54usb: firmware boot failed!\n");
+ goto err_upload_failed;
+ }
+
+ timeout = jiffies + msecs_to_jiffies(1000);
+ while (!(err = usb_bulk_msg(priv->udev,
+ usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), buf, 128, &alen, 1000))) {
+ if (alen > 0 && buf[0] == 'g')
+ break;
+
+ if (time_after(jiffies, timeout)) {
+ err = -ETIMEDOUT;
+ break;
+ }
+ }
+ if (err)
+ goto err_upload_failed;
+
+ err_upload_failed:
+ release_firmware(fw_entry);
+ err_req_fw_failed:
+ err_reset:
+ kfree(buf);
+ err_bufalloc:
+ return err;
+}
+
+static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
+{
+ struct p54u_priv *priv = dev->priv;
+ const struct firmware *fw_entry = NULL;
+ const struct p54p_csr *devreg = (const struct p54p_csr *) P54U_DEV_BASE;
+ int err, alen;
+ void *buf;
+ __le32 reg;
+ unsigned int remains, offset;
+ u8 *data;
+
+ buf = kmalloc(512, GFP_KERNEL);
+ if (!buf) {
+ printk(KERN_ERR "p54usb: firmware buffer alloc failed!\n");
+ return -ENOMEM;
+ }
+
+ err = request_firmware(&fw_entry, "isl3890usb", &priv->udev->dev);
+ if (err) {
+ printk(KERN_ERR "p54usb: cannot find firmware (isl3890usb)!\n");
+ kfree(buf);
+ return err;
+ }
+
+ p54_parse_firmware(dev, fw_entry);
+
+#define P54U_WRITE(type, addr, data) \
+ do {\
+ err = p54u_write(priv, buf, type,\
+ cpu_to_le32((u32)(unsigned long)addr), data);\
+ if (err) \
+ goto fail;\
+ } while (0)
+
+#define P54U_READ(type, addr) \
+ do {\
+ err = p54u_read(priv, buf, type,\
+ cpu_to_le32((u32)(unsigned long)addr), &reg);\
+ if (err)\
+ goto fail;\
+ } while (0)
+
+ /* power down net2280 bridge */
+ P54U_READ(NET2280_BRG_U32, NET2280_GPIOCTL);
+ reg |= cpu_to_le32(P54U_BRG_POWER_DOWN);
+ reg &= cpu_to_le32(~P54U_BRG_POWER_UP);
+ P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg);
+
+ mdelay(100);
+
+ /* power up bridge */
+ reg |= cpu_to_le32(P54U_BRG_POWER_UP);
+ reg &= cpu_to_le32(~P54U_BRG_POWER_DOWN);
+ P54U_WRITE(NET2280_BRG_U32, NET2280_GPIOCTL, reg);
+
+ mdelay(100);
+
+ P54U_WRITE(NET2280_BRG_U32, NET2280_DEVINIT,
+ cpu_to_le32(NET2280_CLK_30Mhz |
+ NET2280_PCI_ENABLE |
+ NET2280_PCI_SOFT_RESET));
+
+ mdelay(20);
+
+ P54U_WRITE(NET2280_BRG_CFG_U16, PCI_COMMAND,
+ cpu_to_le32(PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER));
+
+ P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_0,
+ cpu_to_le32(NET2280_BASE));
+
+ P54U_READ(NET2280_BRG_CFG_U16, PCI_STATUS);
+ reg |= cpu_to_le32(PCI_STATUS_REC_MASTER_ABORT);
+ P54U_WRITE(NET2280_BRG_CFG_U16, PCI_STATUS, reg);
+
+ // TODO: we really need this?
+ P54U_READ(NET2280_BRG_U32, NET2280_RELNUM);
+
+ P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_RSP,
+ cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE));
+ P54U_WRITE(NET2280_BRG_U32, NET2280_EPC_RSP,
+ cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE));
+
+ P54U_WRITE(NET2280_BRG_CFG_U32, PCI_BASE_ADDRESS_2,
+ cpu_to_le32(NET2280_BASE2));
+
+ /* finally done setting up the bridge */
+
+ P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | PCI_COMMAND,
+ cpu_to_le32(PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER));
+
+ P54U_WRITE(NET2280_DEV_CFG_U16, 0x10000 | 0x40 /* TRDY timeout */, 0);
+ P54U_WRITE(NET2280_DEV_CFG_U32, 0x10000 | PCI_BASE_ADDRESS_0,
+ cpu_to_le32(P54U_DEV_BASE));
+
+ P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0);
+ P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1,
+ cpu_to_le32(NET2280_PCI_INTA_INTERRUPT));
+
+ /* do romboot */
+ P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable, 0);
+
+ P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat);
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT);
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN);
+ P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg);
+
+ mdelay(20);
+
+ reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET);
+ P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg);
+
+ mdelay(20);
+
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
+ P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg);
+
+ mdelay(100);
+
+ P54U_READ(NET2280_DEV_U32, &devreg->int_ident);
+ P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg);
+
+ /* finally, we can upload firmware now! */
+ remains = fw_entry->size;
+ data = fw_entry->data;
+ offset = ISL38XX_DEV_FIRMWARE_ADDR;
+
+ while (remains) {
+ unsigned int block_len = min(remains, (unsigned int)512);
+ memcpy(buf, data, block_len);
+
+ err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len);
+ if (err) {
+ printk(KERN_ERR "prism54usb: firmware block upload "
+ "failed\n");
+ goto fail;
+ }
+
+ P54U_WRITE(NET2280_DEV_U32, &devreg->direct_mem_base,
+ cpu_to_le32(0xc0000f00));
+
+ P54U_WRITE(NET2280_DEV_U32,
+ 0x0020 | (unsigned long)&devreg->direct_mem_win, 0);
+ P54U_WRITE(NET2280_DEV_U32,
+ 0x0020 | (unsigned long)&devreg->direct_mem_win,
+ cpu_to_le32(1));
+
+ P54U_WRITE(NET2280_DEV_U32,
+ 0x0024 | (unsigned long)&devreg->direct_mem_win,
+ cpu_to_le32(block_len));
+ P54U_WRITE(NET2280_DEV_U32,
+ 0x0028 | (unsigned long)&devreg->direct_mem_win,
+ cpu_to_le32(offset));
+
+ P54U_WRITE(NET2280_DEV_U32, &devreg->dma_addr,
+ cpu_to_le32(NET2280_EPA_FIFO_PCI_ADDR));
+ P54U_WRITE(NET2280_DEV_U32, &devreg->dma_len,
+ cpu_to_le32(block_len >> 2));
+ P54U_WRITE(NET2280_DEV_U32, &devreg->dma_ctrl,
+ cpu_to_le32(ISL38XX_DMA_MASTER_CONTROL_TRIGGER));
+
+ mdelay(10);
+
+ P54U_READ(NET2280_DEV_U32,
+ 0x002C | (unsigned long)&devreg->direct_mem_win);
+ if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) ||
+ !(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) {
+ printk(KERN_ERR "prism54usb: firmware DMA transfer "
+ "failed\n");
+ goto fail;
+ }
+
+ P54U_WRITE(NET2280_BRG_U32, NET2280_EPA_STAT,
+ cpu_to_le32(NET2280_FIFO_FLUSH));
+
+ remains -= block_len;
+ data += block_len;
+ offset += block_len;
+ }
+
+ /* do ramboot */
+ P54U_READ(NET2280_DEV_U32, &devreg->ctrl_stat);
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN);
+ reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT);
+ P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg);
+
+ mdelay(20);
+
+ reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET);
+ P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg);
+
+ reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET);
+ P54U_WRITE(NET2280_DEV_U32, &devreg->ctrl_stat, reg);
+
+ mdelay(100);
+
+ P54U_READ(NET2280_DEV_U32, &devreg->int_ident);
+ P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg);
+
+ /* start up the firmware */
+ P54U_WRITE(NET2280_DEV_U32, &devreg->int_enable,
+ cpu_to_le32(ISL38XX_INT_IDENT_INIT));
+
+ P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1,
+ cpu_to_le32(NET2280_PCI_INTA_INTERRUPT));
+
+ P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1,
+ cpu_to_le32(NET2280_PCI_INTA_INTERRUPT_ENABLE |
+ NET2280_USB_INTERRUPT_ENABLE));
+
+ P54U_WRITE(NET2280_DEV_U32, &devreg->dev_int,
+ cpu_to_le32(ISL38XX_DEV_INT_RESET));
+
+ err = usb_interrupt_msg(priv->udev,
+ usb_rcvbulkpipe(priv->udev, P54U_PIPE_INT),
+ buf, sizeof(__le32), &alen, 1000);
+ if (err || alen != sizeof(__le32))
+ goto fail;
+
+ P54U_READ(NET2280_DEV_U32, &devreg->int_ident);
+ P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg);
+
+ if (!(reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT)))
+ err = -EINVAL;
+
+ P54U_WRITE(NET2280_BRG_U32, NET2280_USBIRQENB1, 0);
+ P54U_WRITE(NET2280_BRG_U32, NET2280_IRQSTAT1,
+ cpu_to_le32(NET2280_PCI_INTA_INTERRUPT));
+
+#undef P54U_WRITE
+#undef P54U_READ
+
+ fail:
+ release_firmware(fw_entry);
+ kfree(buf);
+ return err;
+}
+
+static int p54u_open(struct ieee80211_hw *dev)
+{
+ struct p54u_priv *priv = dev->priv;
+ int err;
+
+ err = p54u_init_urbs(dev);
+ if (err) {
+ return err;
+ }
+
+ priv->common.open = p54u_init_urbs;
+
+ return 0;
+}
+
+static void p54u_stop(struct ieee80211_hw *dev)
+{
+ /* TODO: figure out how to reliably stop the 3887 and net2280 so
+ the hardware is still usable next time we want to start it.
+ until then, we just stop listening to the hardware.. */
+ p54u_free_urbs(dev);
+ return;
+}
+
+static int __devinit p54u_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct ieee80211_hw *dev;
+ struct p54u_priv *priv;
+ int err;
+ unsigned int i, recognized_pipes;
+ DECLARE_MAC_BUF(mac);
+
+ dev = p54_init_common(sizeof(*priv));
+ if (!dev) {
+ printk(KERN_ERR "prism54usb: ieee80211 alloc failed\n");
+ return -ENOMEM;
+ }
+
+ priv = dev->priv;
+
+ SET_IEEE80211_DEV(dev, &intf->dev);
+ usb_set_intfdata(intf, dev);
+ priv->udev = udev;
+
+ usb_get_dev(udev);
+
+ /* really lazy and simple way of figuring out if we're a 3887 */
+ /* TODO: should just stick the identification in the device table */
+ i = intf->altsetting->desc.bNumEndpoints;
+ recognized_pipes = 0;
+ while (i--) {
+ switch (intf->altsetting->endpoint[i].desc.bEndpointAddress) {
+ case P54U_PIPE_DATA:
+ case P54U_PIPE_MGMT:
+ case P54U_PIPE_BRG:
+ case P54U_PIPE_DEV:
+ case P54U_PIPE_DATA | USB_DIR_IN:
+ case P54U_PIPE_MGMT | USB_DIR_IN:
+ case P54U_PIPE_BRG | USB_DIR_IN:
+ case P54U_PIPE_DEV | USB_DIR_IN:
+ case P54U_PIPE_INT | USB_DIR_IN:
+ recognized_pipes++;
+ }
+ }
+ priv->common.open = p54u_open;
+
+ if (recognized_pipes < P54U_PIPE_NUMBER) {
+ priv->hw_type = P54U_3887;
+ priv->common.tx = p54u_tx_3887;
+ } else {
+ dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr);
+ priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr);
+ priv->common.tx = p54u_tx_net2280;
+ }
+ priv->common.stop = p54u_stop;
+
+ if (priv->hw_type)
+ err = p54u_upload_firmware_3887(dev);
+ else
+ err = p54u_upload_firmware_net2280(dev);
+ if (err)
+ goto err_free_dev;
+
+ err = p54u_read_eeprom(dev);
+ if (err)
+ goto err_free_dev;
+
+ if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
+ u8 perm_addr[ETH_ALEN];
+
+ printk(KERN_WARNING "prism54usb: Invalid hwaddr! Using randomly generated MAC addr\n");
+ random_ether_addr(perm_addr);
+ SET_IEEE80211_PERM_ADDR(dev, perm_addr);
+ }
+
+ skb_queue_head_init(&priv->rx_queue);
+
+ err = ieee80211_register_hw(dev);
+ if (err) {
+ printk(KERN_ERR "prism54usb: Cannot register netdevice\n");
+ goto err_free_dev;
+ }
+
+ printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n",
+ wiphy_name(dev->wiphy),
+ print_mac(mac, dev->wiphy->perm_addr),
+ priv->common.version);
+
+ return 0;
+
+ err_free_dev:
+ ieee80211_free_hw(dev);
+ usb_set_intfdata(intf, NULL);
+ usb_put_dev(udev);
+ return err;
+}
+
+static void __devexit p54u_disconnect(struct usb_interface *intf)
+{
+ struct ieee80211_hw *dev = usb_get_intfdata(intf);
+ struct p54u_priv *priv;
+
+ if (!dev)
+ return;
+
+ ieee80211_unregister_hw(dev);
+
+ priv = dev->priv;
+ usb_put_dev(interface_to_usbdev(intf));
+ p54_free_common(dev);
+ ieee80211_free_hw(dev);
+}
+
+static struct usb_driver p54u_driver = {
+ .name = "prism54usb",
+ .id_table = p54u_table,
+ .probe = p54u_probe,
+ .disconnect = p54u_disconnect,
+};
+
+static int __init p54u_init(void)
+{
+ return usb_register(&p54u_driver);
+}
+
+static void __exit p54u_exit(void)
+{
+ usb_deregister(&p54u_driver);
+}
+
+module_init(p54u_init);
+module_exit(p54u_exit);
diff --git a/drivers/net/wireless/p54usb.h b/drivers/net/wireless/p54usb.h
new file mode 100644
index 00000000000..d1896b396c1
--- /dev/null
+++ b/drivers/net/wireless/p54usb.h
@@ -0,0 +1,133 @@
+#ifndef PRISM54USB_H
+#define PRISM54USB_H
+
+/*
+ * Defines for USB based mac80211 Prism54 driver
+ *
+ * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
+ *
+ * Based on the islsm (softmac prism54) driver, which is:
+ * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* for isl3886 register definitions used on ver 1 devices */
+#include "p54pci.h"
+#include "net2280.h"
+
+/* pci */
+#define NET2280_BASE 0x10000000
+#define NET2280_BASE2 0x20000000
+
+/* gpio */
+#define P54U_BRG_POWER_UP (1 << GPIO0_DATA)
+#define P54U_BRG_POWER_DOWN (1 << GPIO1_DATA)
+
+/* devinit */
+#define NET2280_CLK_4Mhz (15 << LOCAL_CLOCK_FREQUENCY)
+#define NET2280_CLK_30Mhz (2 << LOCAL_CLOCK_FREQUENCY)
+#define NET2280_CLK_60Mhz (1 << LOCAL_CLOCK_FREQUENCY)
+#define NET2280_CLK_STOP (0 << LOCAL_CLOCK_FREQUENCY)
+#define NET2280_PCI_ENABLE (1 << PCI_ENABLE)
+#define NET2280_PCI_SOFT_RESET (1 << PCI_SOFT_RESET)
+
+/* endpoints */
+#define NET2280_CLEAR_NAK_OUT_PACKETS_MODE (1 << CLEAR_NAK_OUT_PACKETS_MODE)
+#define NET2280_FIFO_FLUSH (1 << FIFO_FLUSH)
+
+/* irq */
+#define NET2280_USB_INTERRUPT_ENABLE (1 << USB_INTERRUPT_ENABLE)
+#define NET2280_PCI_INTA_INTERRUPT (1 << PCI_INTA_INTERRUPT)
+#define NET2280_PCI_INTA_INTERRUPT_ENABLE (1 << PCI_INTA_INTERRUPT_ENABLE)
+
+/* registers */
+#define NET2280_DEVINIT 0x00
+#define NET2280_USBIRQENB1 0x24
+#define NET2280_IRQSTAT1 0x2c
+#define NET2280_FIFOCTL 0x38
+#define NET2280_GPIOCTL 0x50
+#define NET2280_RELNUM 0x88
+#define NET2280_EPA_RSP 0x324
+#define NET2280_EPA_STAT 0x32c
+#define NET2280_EPB_STAT 0x34c
+#define NET2280_EPC_RSP 0x364
+#define NET2280_EPC_STAT 0x36c
+#define NET2280_EPD_STAT 0x38c
+
+#define NET2280_EPA_CFG 0x320
+#define NET2280_EPB_CFG 0x340
+#define NET2280_EPC_CFG 0x360
+#define NET2280_EPD_CFG 0x380
+#define NET2280_EPE_CFG 0x3A0
+#define NET2280_EPF_CFG 0x3C0
+#define P54U_DEV_BASE 0x40000000
+
+struct net2280_tx_hdr {
+ __le32 device_addr;
+ __le16 len;
+ __le16 follower; /* ? */
+ u8 padding[8];
+} __attribute__((packed));
+
+/* Some flags for the isl hardware registers controlling DMA inside the
+ * chip */
+#define ISL38XX_DMA_STATUS_DONE 0x00000001
+#define ISL38XX_DMA_STATUS_READY 0x00000002
+#define NET2280_EPA_FIFO_PCI_ADDR 0x20000000
+#define ISL38XX_DMA_MASTER_CONTROL_TRIGGER 0x00000004
+
+enum net2280_op_type {
+ NET2280_BRG_U32 = 0x001F,
+ NET2280_BRG_CFG_U32 = 0x000F,
+ NET2280_BRG_CFG_U16 = 0x0003,
+ NET2280_DEV_U32 = 0x080F,
+ NET2280_DEV_CFG_U32 = 0x088F,
+ NET2280_DEV_CFG_U16 = 0x0883
+};
+
+#define P54U_FW_BLOCK 2048
+
+#define X2_SIGNATURE "x2 "
+#define X2_SIGNATURE_SIZE 4
+
+struct x2_header {
+ u8 signature[X2_SIGNATURE_SIZE];
+ __le32 fw_load_addr;
+ __le32 fw_length;
+ __le32 crc;
+} __attribute__((packed));
+
+/* pipes 3 and 4 are not used by the driver */
+#define P54U_PIPE_NUMBER 9
+
+enum p54u_pipe_addr {
+ P54U_PIPE_DATA = 0x01,
+ P54U_PIPE_MGMT = 0x02,
+ P54U_PIPE_3 = 0x03,
+ P54U_PIPE_4 = 0x04,
+ P54U_PIPE_BRG = 0x0d,
+ P54U_PIPE_DEV = 0x0e,
+ P54U_PIPE_INT = 0x0f
+};
+
+struct p54u_rx_info {
+ struct urb *urb;
+ struct ieee80211_hw *dev;
+};
+
+struct p54u_priv {
+ struct p54_common common;
+ struct usb_device *udev;
+ enum {
+ P54U_NET2280 = 0,
+ P54U_3887
+ } hw_type;
+
+ spinlock_t lock;
+ struct sk_buff_head rx_queue;
+};
+
+#endif /* PRISM54USB_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-01 15:57:26 +0000