diff options
| -rw-r--r-- | arch/arm/boot/dts/kirkwood-6281.dtsi | 7 | ||||
| -rw-r--r-- | arch/arm/boot/dts/kirkwood-mplcec4.dts | 59 | ||||
| -rw-r--r-- | arch/arm/mach-kirkwood/board-mplcec4.c | 35 |
3 files changed, 65 insertions, 36 deletions
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index b0fe6828b4f..d6c9d65cbae 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -34,6 +34,11 @@ marvell,pins = "mpp13", "mpp14"; marvell,function = "uart1"; }; + pmx_sdio: pmx-sdio { + marvell,pins = "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "sdio"; + }; }; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index ac3c080bed2..262c6540376 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "MPL CEC4"; @@ -16,6 +17,64 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart0 + &pmx_led_health &pmx_sdio + &pmx_sata0 &pmx_sata1 + &pmx_led_user1o + &pmx_led_user1g &pmx_led_user0o + &pmx_led_user0g &pmx_led_misc + &pmx_sdio_cd + >; + pinctrl-names = "default"; + + pmx_led_health: pmx-led-health { + marvell,pins = "mpp7"; + marvell,function = "gpo"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp34"; + marvell,function = "sata1"; + }; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp35"; + marvell,function = "sata0"; + }; + + pmx_led_user1o: pmx-led-user1o { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_user1g: pmx-led-user1g { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_user0o: pmx-led-user0o { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_led_user0g: pmx-led-user0g { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_led_misc: pmx-led-misc { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + i2c@11000 { status = "okay"; diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c index e78a227468e..47e71815baf 100644 --- a/arch/arm/mach-kirkwood/board-mplcec4.c +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -24,51 +24,16 @@ static struct mv643xx_eth_platform_data mplcec4_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(2), }; -static unsigned int mplcec4_mpp_config[] __initdata = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, /* Status LED Green High Active */ - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, - MPP13_SD_CMD, /* Alt UART1_TXD */ - MPP14_SD_D0, /* Alt UART1_RXD */ - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP28_GPIO, /* Input SYS_POR_DET (active High) */ - MPP29_GPIO, /* Input SYS_RTC_INT (active High) */ - MPP34_SATA1_ACTn, - MPP35_SATA0_ACTn, - MPP40_GPIO, /* LED User1 orange */ - MPP41_GPIO, /* LED User1 green */ - MPP44_GPIO, /* LED User0 orange */ - MPP45_GPIO, /* LED User0 green */ - MPP46_GPIO, /* Status LED Yellow High Active */ - MPP47_GPIO, /* SD_CD# (in/IRQ)*/ - 0 -}; - - static struct mvsdio_platform_data mplcec4_mvsdio_data = { .gpio_card_detect = 47, /* MPP47 used as SD card detect */ }; - void __init mplcec4_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(mplcec4_mpp_config); kirkwood_ehci_init(); kirkwood_ge00_init(&mplcec4_ge00_data); kirkwood_ge01_init(&mplcec4_ge01_data); |