aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--scripts/Makefile.headersinst4
-rw-r--r--scripts/headers_install.pl63
-rw-r--r--scripts/headers_install.sh43
3 files changed, 45 insertions, 65 deletions
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 477d137c055..182084d728c 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -72,7 +72,7 @@ printdir = $(patsubst $(INSTALL_HDR_PATH)/%/,%,$(dir $@))
quiet_cmd_install = INSTALL $(printdir) ($(words $(all-files))\
file$(if $(word 2, $(all-files)),s))
cmd_install = \
- $(PERL) $< $(installdir) $(SRCARCH) $(input-files); \
+ $(CONFIG_SHELL) $< $(installdir) $(input-files); \
for F in $(wrapper-files); do \
echo "\#include <asm-generic/$$F>" > $(installdir)/$$F; \
done; \
@@ -98,7 +98,7 @@ __headersinst: $(subdirs) $(install-file)
@:
targets += $(install-file)
-$(install-file): scripts/headers_install.pl $(input-files) FORCE
+$(install-file): scripts/headers_install.sh $(input-files) FORCE
$(if $(unwanted),$(call cmd,remove),)
$(if $(wildcard $(dir $@)),,$(shell mkdir -p $(dir $@)))
$(call if_changed,install)
diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl
deleted file mode 100644
index 581ca99c96f..00000000000
--- a/scripts/headers_install.pl
+++ /dev/null
@@ -1,63 +0,0 @@
-#!/usr/bin/perl -w
-#
-# headers_install prepare the listed header files for use in
-# user space and copy the files to their destination.
-#
-# Usage: headers_install.pl readdir installdir arch [files...]
-# installdir: dir to install the files to
-# arch: current architecture
-# arch is used to force a reinstallation when the arch
-# changes because kbuild then detect a command line change.
-# files: list of files to check
-#
-# Step in preparation for users space:
-# 1) Drop all use of compiler.h definitions
-# 2) Drop include of compiler.h
-# 3) Drop all sections defined out by __KERNEL__ (using unifdef)
-
-use strict;
-
-my ($installdir, $arch, @files) = @ARGV;
-
-my $unifdef = "scripts/unifdef -U__KERNEL__ -D__EXPORTED_HEADERS__";
-
-foreach my $filename (@files) {
- my $file = $filename;
- $file =~ s!^.*/!!;
-
- my $tmpfile = "$installdir/$file.tmp";
-
- open(my $in, '<', $filename)
- or die "$filename: $!\n";
- open(my $out, '>', $tmpfile)
- or die "$tmpfile: $!\n";
- while (my $line = <$in>) {
- $line =~ s/([\s(])__user\s/$1/g;
- $line =~ s/([\s(])__force\s/$1/g;
- $line =~ s/([\s(])__iomem\s/$1/g;
- $line =~ s/\s__attribute_const__\s/ /g;
- $line =~ s/\s__attribute_const__$//g;
- $line =~ s/\b__packed\b/__attribute__((packed))/g;
- $line =~ s/^#include <linux\/compiler.h>//;
- $line =~ s/(^|\s)(inline)\b/$1__$2__/g;
- $line =~ s/(^|\s)(asm)\b(\s|[(]|$)/$1__$2__$3/g;
- $line =~ s/(^|\s|[(])(volatile)\b(\s|[(]|$)/$1__$2__$3/g;
- $line =~ s/#ifndef\s+_UAPI/#ifndef /;
- $line =~ s/#define\s+_UAPI/#define /;
- $line =~ s!#endif\s+/[*]\s*_UAPI!#endif /* !;
- printf {$out} "%s", $line;
- }
- close $out;
- close $in;
-
- system $unifdef . " $tmpfile > $installdir/$file";
- # unifdef will exit 0 on success, and will exit 1 when the
- # file was processed successfully but no changes were made,
- # so abort only when it's higher than that.
- my $e = $? >> 8;
- if ($e > 1) {
- die "$tmpfile: $!\n";
- }
- unlink $tmpfile;
-}
-exit 0;
diff --git a/scripts/headers_install.sh b/scripts/headers_install.sh
new file mode 100644
index 00000000000..643764f53ea
--- /dev/null
+++ b/scripts/headers_install.sh
@@ -0,0 +1,43 @@
+#!/bin/sh
+
+if [ $# -lt 1 ]
+then
+ echo "Usage: headers_install.sh OUTDIR [FILES...]
+ echo
+ echo "Prepares kernel header files for use by user space, by removing"
+ echo "all compiler.h definitions and #includes, removing any"
+ echo "#ifdef __KERNEL__ sections, and putting __underscores__ around"
+ echo "asm/inline/volatile keywords."
+ echo
+ echo "OUTDIR: directory to write each userspace header FILE to."
+ echo "FILES: list of header files to operate on."
+
+ exit 1
+fi
+
+# Grab arguments
+
+OUTDIR="$1"
+shift
+
+# Iterate through files listed on command line
+
+FILE=
+trap 'rm -f "$OUTDIR/$FILE" "$OUTDIR/$FILE.sed"' EXIT
+for i in "$@"
+do
+ FILE="$(basename "$i")"
+ sed -r \
+ -e 's/([ \t(])(__user|__force|__iomem)[ \t]/\1/g' \
+ -e 's/__attribute_const__([ \t]|$)/\1/g' \
+ -e 's@^#include <linux/compiler.h>@@' \
+ -e 's/(^|[^a-zA-Z0-9])__packed([^a-zA-Z0-9_]|$)/\1__attribute__((packed))\2/g' \
+ -e 's/(^|[ \t(])(inline|asm|volatile)([ \t(]|$)/\1__\2__\3/g' \
+ -e 's@#(ifndef|define|endif[ \t]*/[*])[ \t]*_UAPI@#\1 @' \
+ "$i" > "$OUTDIR/$FILE.sed" || exit 1
+ scripts/unifdef -U__KERNEL__ -D__EXPORTED_HEADERS__ "$OUTDIR/$FILE.sed" \
+ > "$OUTDIR/$FILE"
+ [ $? -gt 1 ] && exit 1
+ rm -f "$OUTDIR/$FILE.sed"
+done
+trap - EXIT