aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig2
-rw-r--r--arch/arm/mach-lh7a40x/Kconfig2
-rw-r--r--arch/arm/mach-s3c2410/Kconfig2
-rw-r--r--arch/arm/mm/Kconfig2
-rw-r--r--arch/cris/arch-v10/Kconfig2
-rw-r--r--arch/cris/arch-v10/drivers/Kconfig2
-rw-r--r--arch/cris/arch-v32/drivers/Kconfig8
-rw-r--r--arch/m68knommu/Kconfig4
-rw-r--r--arch/mips/Kconfig4
-rw-r--r--arch/powerpc/Kconfig2
-rw-r--r--arch/powerpc/platforms/83xx/Kconfig4
-rw-r--r--arch/ppc/Kconfig2
-rw-r--r--arch/sh/Kconfig2
-rw-r--r--arch/sparc/Kconfig4
-rw-r--r--drivers/char/Kconfig2
-rw-r--r--drivers/media/video/Kconfig2
-rw-r--r--drivers/mtd/maps/Kconfig2
-rw-r--r--drivers/net/Kconfig4
-rw-r--r--drivers/net/phy/Kconfig4
-rw-r--r--drivers/pci/Kconfig2
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/usb/host/Kconfig2
-rw-r--r--fs/Kconfig2
-rw-r--r--sound/Kconfig4
24 files changed, 34 insertions, 34 deletions
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 57f23b46539..e316bd93313 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -133,7 +133,7 @@ config IXP4XX_INDIRECT_PCI
into the kernel and we can use the standard read[bwl]/write[bwl]
macros. This is the preferred method due to speed but it
limits the system to just 64MB of PCI memory. This can be
- problamatic if using video cards and other memory-heavy devices.
+ problematic if using video cards and other memory-heavy devices.
2) If > 64MB of memory space is required, the IXP4xx can be
configured to use indirect registers to access PCI This allows
diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig
index 147b01928a9..6f4c6a1798c 100644
--- a/arch/arm/mach-lh7a40x/Kconfig
+++ b/arch/arm/mach-lh7a40x/Kconfig
@@ -8,7 +8,7 @@ config MACH_KEV7A400
help
Say Y here if you are using the Sharp KEV7A400 development
board. This hardware is discontinued, so I'd be very
- suprised if you wanted this option.
+ surprised if you wanted this option.
config MACH_LPD7A400
bool "LPD7A400 Card Engine"
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 63965c78de8..9aa26b99045 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -91,7 +91,7 @@ config SMDK2440_CPU2442
config MACH_S3C2413
bool
help
- Internal node for S3C2413 verison of SMDK2413, so that
+ Internal node for S3C2413 version of SMDK2413, so that
machine_is_s3c2413() will work when MACH_SMDK2413 is
selected
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c0bfb8212b7..b09a19f87d6 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -197,7 +197,7 @@ config CPU_ARM940T
select CPU_CP15_MPU
help
ARM940T is a member of the ARM9TDMI family of general-
- purpose microprocessors with MPU and seperate 4KB
+ purpose microprocessors with MPU and separate 4KB
instruction and 4KB data cases, each with a 4-word line
length.
diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index 44eb1b9accb..c7ea9efd010 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -323,7 +323,7 @@ config ETRAX_DEF_R_WAITSTATES
depends on ETRAX_ARCH_V10
default "95a6"
help
- Waitstates for SRAM, Flash and peripherials (not DRAM). 95f8 is a
+ Waitstates for SRAM, Flash and peripherals (not DRAM). 95f8 is a
good choice for most Axis products...
config ETRAX_DEF_R_BUS_CONFIG
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 734d5f3a530..e7e724bc0ba 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -839,7 +839,7 @@ config ETRAX_DS1302_TRICKLE_CHARGE
default "0"
help
This controls the initial value of the trickle charge register.
- 0 = disabled (use this if you are unsure or have a non rechargable battery)
+ 0 = disabled (use this if you are unsure or have a non rechargeable battery)
Otherwise the following values can be OR:ed together to control the
charge current:
1 = 2kohm, 2 = 4kohm, 3 = 4kohm
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index a33097f9536..f64624fc450 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -88,7 +88,7 @@ config ETRAX_SERIAL_PORT0_DMA7_IN
help
Enables the DMA7 input channel for ser0 (ttyS0).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
@@ -157,7 +157,7 @@ config ETRAX_SERIAL_PORT1_DMA5_IN
help
Enables the DMA5 input channel for ser1 (ttyS1).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want this on, unless you use the DMA channel for
something else.
@@ -228,7 +228,7 @@ config ETRAX_SERIAL_PORT2_DMA3_IN
help
Enables the DMA3 input channel for ser2 (ttyS2).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
@@ -297,7 +297,7 @@ config ETRAX_SERIAL_PORT3_DMA9_IN
help
Enables the DMA9 input channel for ser3 (ttyS3).
If you do not enable DMA, an interrupt for each character will be
- used when receiveing data.
+ used when receiving data.
Normally you want to use DMA, unless you use the DMA channel for
something else.
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 6d920d4bdc3..c1bc22c6d0d 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -565,7 +565,7 @@ config ROMVEC
depends on ROM
help
This is almost always the same as the base of the ROM. Since on all
- 68000 type varients the vectors are at the base of the boot device
+ 68000 type variants the vectors are at the base of the boot device
on system startup.
config ROMVECSIZE
@@ -574,7 +574,7 @@ config ROMVECSIZE
depends on ROM
help
Define the size of the vector region in ROM. For most 68000
- varients this would be 0x400 bytes in size. Set to 0 if you do
+ variants this would be 0x400 bytes in size. Set to 0 if you do
not want a vector region at the start of the ROM.
config ROMSTART
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1443024b1c7..22bb540b5c0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -865,7 +865,7 @@ config MIPS_DISABLE_OBSOLETE_IDE
bool
#
-# Endianess selection. Suffiently obscure so many users don't know what to
+# Endianess selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
# choice statement should be more obvious to the user.
#
@@ -874,7 +874,7 @@ choice
help
Some MIPS machines can be configured for either little or big endian
byte order. These modes require different kernels and a different
- Linux distribution. In general there is one prefered byteorder for a
+ Linux distribution. In general there is one preferred byteorder for a
particular system but some systems are just as commonly used in the
one or the other endianess.
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 0673dbedb24..116d7d3683e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -425,7 +425,7 @@ config PPC_MAPLE
default n
help
This option enables support for the Maple 970FX Evaluation Board.
- For more informations, refer to <http://www.970eval.com>
+ For more information, refer to <http://www.970eval.com>
config PPC_PASEMI
depends on PPC_MULTIPLATFORM && PPC64
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 7edb6b46138..edcd5b875b6 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -21,7 +21,7 @@ config MPC834x_SYS
Be aware that PCI buses can only function when SYS board is plugged
into the PIB (Platform IO Board) board from Freescale which provide
3 PCI slots. The PIBs PCI initialization is the bootloader's
- responsiblilty.
+ responsibility.
config MPC834x_ITX
bool "Freescale MPC834x ITX"
@@ -30,7 +30,7 @@ config MPC834x_ITX
This option enables support for the MPC 834x ITX evaluation board.
Be aware that PCI initialization is the bootloader's
- responsiblilty.
+ responsibility.
config MPC8360E_PB
bool "Freescale MPC8360E PB"
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 077711e6310..ef018e25fb0 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -724,7 +724,7 @@ config MPC834x_SYS
Be aware that PCI buses can only function when SYS board is plugged
into the PIB (Platform IO Board) board from Freescale which provide
3 PCI slots. The PIBs PCI initialization is the bootloader's
- responsiblilty.
+ responsibility.
config EV64360
bool "Marvell-EV64360BP"
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6a461d4caef..bffc7e17697 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -217,7 +217,7 @@ config SH_SHMIN
bool "SHMIN"
select CPU_SUBTYPE_SH7706
help
- Select SHMIN if configureing for the SHMIN board
+ Select SHMIN if configuring for the SHMIN board.
config SH_UNKNOWN
bool "BareCPU"
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 2f96610a83e..92a7c8a636d 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -212,8 +212,8 @@ config SPARC_LED
tristate "Sun4m LED driver"
help
This driver toggles the front-panel LED on sun4m systems
- in a user-specifyable manner. It's state can be probed
- by reading /proc/led and it's blinking mode can be changed
+ in a user-specifiable manner. Its state can be probed
+ by reading /proc/led and its blinking mode can be changed
via writes to /proc/led
source "fs/Kconfig.binfmt"
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 2af12fc4511..ad8b537ad47 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -994,7 +994,7 @@ config HPET
help
If you say Y here, you will have a miscdevice named "/dev/hpet/". Each
open selects one of the timers supported by the HPET. The timers are
- non-periodioc and/or periodic.
+ non-periodic and/or periodic.
config HPET_RTC_IRQ
bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index bf267552941..b8fde5cf473 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -24,7 +24,7 @@ config VIDEO_HELPER_CHIPS_AUTO
decode audio/video standards. This option will autoselect
all pertinent modules to each selected video module.
- Unselect this only if you know exaclty what you are doing, since
+ Unselect this only if you know exactly what you are doing, since
it may break support on some boards.
In doubt, say Y.
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 24747bdc3e1..d132ed571f1 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -607,7 +607,7 @@ config MTD_BAST_MAXSIZE
default "4"
config MTD_SHARP_SL
- bool "ROM maped on Sharp SL Series"
+ bool "ROM mapped on Sharp SL Series"
depends on MTD && ARCH_PXA
help
This enables access to the flash chip on the Sharp SL Series of PDAs.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6e863aa9894..b6c70c58ae9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -32,7 +32,7 @@ config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
---help---
- This is an intermidiate driver that allows sharing of
+ This is an intermediate driver that allows sharing of
resources.
To compile this driver as a module, choose M here: the module
will be called ifb. If you want to use more than one ifb
@@ -2136,7 +2136,7 @@ config SK98LIN
This driver supports the original Yukon chipset. A cleaner driver is
also available (skge) which seems to work better than this one.
- This driver does not support the newer Yukon2 chipset. A seperate
+ This driver does not support the newer Yukon2 chipset. A separate
driver, sky2, is provided to support Yukon2-based adapters.
The following adapters are supported by this driver:
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index b79ec0d7480..ecb61f876f2 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -61,8 +61,8 @@ config FIXED_PHY
depends on PHYLIB
---help---
Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
- but with the ability to manipulate with speed/link in software. The relavant MII
- speed/duplex parameters could be effectively handled in user-specified fuction.
+ but with the ability to manipulate the speed/link in software. The relevant MII
+ speed/duplex parameters could be effectively handled in a user-specified function.
Currently tested with mpc866ads.
config FIXED_MII_10_FDX
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 5f1b9f58070..d0ba112355c 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -27,7 +27,7 @@ config PCI_MULTITHREAD_PROBE
smaller speedup on single processor machines.
But it can also cause lots of bad things to happen. A number
- of PCI drivers can not properly handle running in this way,
+ of PCI drivers cannot properly handle running in this way,
some will just not work properly at all, while others might
decide to blow up power supplies with a huge load all at once,
so use this option at your own risk.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 23334c8bc4c..d895a1adb42 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -16,7 +16,7 @@ config SPI
controller and a chipselect. Most SPI slaves don't support
dynamic device discovery; some are even write-only or read-only.
- SPI is widely used by microcontollers to talk with sensors,
+ SPI is widely used by microcontrollers to talk with sensors,
eeprom and flash memory, codecs and various other controller
chips, analog to digital (and d-to-a) converters, and more.
MMC and SD cards can be accessed using SPI protocol; and for
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index cf10cbc98f8..cc60759083b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -153,7 +153,7 @@ config USB_U132_HCD
adapter will *NOT* work with PC cards that do not contain an OHCI
controller.
- For those PC cards that contain multiple OHCI controllers only ther
+ For those PC cards that contain multiple OHCI controllers only the
first one is used.
The driver consists of two modules, the "ftdi-elan" module is a
diff --git a/fs/Kconfig b/fs/Kconfig
index 7b1511d50b0..8bec76bbc0c 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1145,7 +1145,7 @@ config BEFS_FS
help
The BeOS File System (BeFS) is the native file system of Be, Inc's
BeOS. Notable features include support for arbitrary attributes
- on files and directories, and database-like indeces on selected
+ on files and directories, and database-like indices on selected
attributes. (Also note that this driver doesn't make those features
available at this time). It is a 64 bit filesystem, so it supports
extremely large volumes and files.
diff --git a/sound/Kconfig b/sound/Kconfig
index e0d791a9845..95949b6806a 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -64,11 +64,11 @@ source "sound/arm/Kconfig"
source "sound/mips/Kconfig"
-# the following will depenend on the order of config.
+# the following will depend on the order of config.
# here assuming USB is defined before ALSA
source "sound/usb/Kconfig"
-# the following will depenend on the order of config.
+# the following will depend on the order of config.
# here assuming PCMCIA is defined before ALSA
source "sound/pcmcia/Kconfig"