diff options
| -rw-r--r-- | drivers/mtd/onenand/onenand_base.c | 292 | ||||
| -rw-r--r-- | include/linux/mtd/onenand.h | 4 |
2 files changed, 264 insertions, 32 deletions
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 6e250f3a4a1..7bd6ad3ff30 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1,17 +1,19 @@ /* * linux/drivers/mtd/onenand/onenand_base.c * - * Copyright (C) 2005-2007 Samsung Electronics + * Copyright © 2005-2009 Samsung Electronics + * Copyright © 2007 Nokia Corporation + * * Kyungmin Park <kyungmin.park@samsung.com> * * Credits: * Adrian Hunter <ext-adrian.hunter@nokia.com>: * auto-placement support, read-while load support, various fixes - * Copyright (C) Nokia Corporation, 2007 * * Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com> * Flex-OneNAND support - * Copyright (C) Samsung Electronics, 2008 + * Amul Kumar Saha <amul.saha at samsung.com> + * OTP support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -43,6 +45,18 @@ MODULE_PARM_DESC(flex_bdry, "SLC Boundary information for Flex-OneNAND" " : 0->Set boundary in unlocked status" " : 1->Set boundary in locked status"); +/* Default OneNAND/Flex-OneNAND OTP options*/ +static int otp; + +module_param(otp, int, 0400); +MODULE_PARM_DESC(otp, "Corresponding behaviour of OneNAND in OTP" + "Syntax : otp=LOCK_TYPE" + "LOCK_TYPE : Keys issued, for specific OTP Lock type" + " : 0 -> Default (No Blocks Locked)" + " : 1 -> OTP Block lock" + " : 2 -> 1st Block lock" + " : 3 -> BOTH OTP Block and 1st Block lock"); + /** * onenand_oob_128 - oob info for Flex-Onenand with 4KB page * For now, we expose only 64 out of 80 ecc bytes @@ -2591,6 +2605,208 @@ static void onenand_unlock_all(struct mtd_info *mtd) #ifdef CONFIG_MTD_ONENAND_OTP +/** + * onenand_otp_command - Send OTP specific command to OneNAND device + * @param mtd MTD device structure + * @param cmd the command to be sent + * @param addr offset to read from or write to + * @param len number of bytes to read or write + */ +static int onenand_otp_command(struct mtd_info *mtd, int cmd, loff_t addr, + size_t len) +{ + struct onenand_chip *this = mtd->priv; + int value, block, page; + + /* Address translation */ + switch (cmd) { + case ONENAND_CMD_OTP_ACCESS: + block = (int) (addr >> this->erase_shift); + page = -1; + break; + + default: + block = (int) (addr >> this->erase_shift); + page = (int) (addr >> this->page_shift); + + if (ONENAND_IS_2PLANE(this)) { + /* Make the even block number */ + block &= ~1; + /* Is it the odd plane? */ + if (addr & this->writesize) + block++; + page >>= 1; + } + page &= this->page_mask; + break; + } + + if (block != -1) { + /* Write 'DFS, FBA' of Flash */ + value = onenand_block_address(this, block); + this->write_word(value, this->base + + ONENAND_REG_START_ADDRESS1); + } + + if (page != -1) { + /* Now we use page size operation */ + int sectors = 4, count = 4; + int dataram; + + switch (cmd) { + default: + if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG) + cmd = ONENAND_CMD_2X_PROG; + dataram = ONENAND_CURRENT_BUFFERRAM(this); + break; + } + + /* Write 'FPA, FSA' of Flash */ + value = onenand_page_address(page, sectors); + this->write_word(value, this->base + + ONENAND_REG_START_ADDRESS8); + + /* Write 'BSA, BSC' of DataRAM */ + value = onenand_buffer_address(dataram, sectors, count); + this->write_word(value, this->base + ONENAND_REG_START_BUFFER); + } + + /* Interrupt clear */ + this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT); + + /* Write command */ + this->write_word(cmd, this->base + ONENAND_REG_COMMAND); + + return 0; +} + +/** + * onenand_otp_write_oob_nolock - [Internal] OneNAND write out-of-band, specific to OTP + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * + * OneNAND write out-of-band only for OTP + */ +static int onenand_otp_write_oob_nolock(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) +{ + struct onenand_chip *this = mtd->priv; + int column, ret = 0, oobsize; + int written = 0; + u_char *oobbuf; + size_t len = ops->ooblen; + const u_char *buf = ops->oobbuf; + int block, value, status; + + to += ops->ooboffs; + + /* Initialize retlen, in case of early exit */ + ops->oobretlen = 0; + + oobsize = mtd->oobsize; + + column = to & (mtd->oobsize - 1); + + oobbuf = this->oob_buf; + + /* Loop until all data write */ + while (written < len) { + int thislen = min_t(int, oobsize, len - written); + + cond_resched(); + + block = (int) (to >> this->erase_shift); + /* + * Write 'DFS, FBA' of Flash + * Add: F100h DQ=DFS, FBA + */ + + value = onenand_block_address(this, block); + this->write_word(value, this->base + + ONENAND_REG_START_ADDRESS1); + + /* + * Select DataRAM for DDP + * Add: F101h DQ=DBS + */ + + value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + + ONENAND_REG_START_ADDRESS2); + ONENAND_SET_NEXT_BUFFERRAM(this); + + /* + * Enter OTP access mode + */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + /* We send data to spare ram with oobsize + * to prevent byte access */ + memcpy(oobbuf + column, buf, thislen); + + /* + * Write Data into DataRAM + * Add: 8th Word + * in sector0/spare/page0 + * DQ=XXFCh + */ + this->write_bufferram(mtd, ONENAND_SPARERAM, + oobbuf, 0, mtd->oobsize); + + onenand_otp_command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); + onenand_update_bufferram(mtd, to, 0); + if (ONENAND_IS_2PLANE(this)) { + ONENAND_SET_BUFFERRAM1(this); + onenand_update_bufferram(mtd, to + this->writesize, 0); + } + + ret = this->wait(mtd, FL_WRITING); + if (ret) { + printk(KERN_ERR "%s: write failed %d\n", __func__, ret); + break; + } + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + status = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); + status &= 0x60; + + if (status == 0x60) { + printk(KERN_DEBUG "\nBLOCK\tSTATUS\n"); + printk(KERN_DEBUG "1st Block\tLOCKED\n"); + printk(KERN_DEBUG "OTP Block\tLOCKED\n"); + } else if (status == 0x20) { + printk(KERN_DEBUG "\nBLOCK\tSTATUS\n"); + printk(KERN_DEBUG "1st Block\tLOCKED\n"); + printk(KERN_DEBUG "OTP Block\tUN-LOCKED\n"); + } else if (status == 0x40) { + printk(KERN_DEBUG "\nBLOCK\tSTATUS\n"); + printk(KERN_DEBUG "1st Block\tUN-LOCKED\n"); + printk(KERN_DEBUG "OTP Block\tLOCKED\n"); + } else { + printk(KERN_DEBUG "Reboot to check\n"); + } + + written += thislen; + if (written == len) + break; + + to += mtd->writesize; + buf += thislen; + column = 0; + } + + ops->oobretlen = written; + + return ret; +} + /* Internal OTP operation */ typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len, size_t *retlen, u_char *buf); @@ -2693,11 +2909,11 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len, struct mtd_oob_ops ops; int ret; - /* Enter OTP access mode */ - this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); - this->wait(mtd, FL_OTPING); - if (FLEXONENAND(this)) { + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); /* * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of * main area of page 49. @@ -2708,19 +2924,19 @@ static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len, ops.oobbuf = NULL; ret = onenand_write_ops_nolock(mtd, mtd->writesize * 49, &ops); *retlen = ops.retlen; + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); } else { ops.mode = MTD_OOB_PLACE; ops.ooblen = len; ops.oobbuf = buf; ops.ooboffs = 0; - ret = onenand_write_oob_nolock(mtd, from, &ops); + ret = onenand_otp_write_oob_nolock(mtd, from, &ops); *retlen = ops.oobretlen; } - /* Exit OTP access mode */ - this->command(mtd, ONENAND_CMD_RESET, 0, 0); - this->wait(mtd, FL_RESETING); - return ret; } @@ -2751,16 +2967,21 @@ static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len, if (density < ONENAND_DEVICE_DENSITY_512Mb) otp_pages = 20; else - otp_pages = 10; + otp_pages = 50; if (mode == MTD_OTP_FACTORY) { from += mtd->writesize * otp_pages; - otp_pages = 64 - otp_pages; + otp_pages = ONENAND_PAGES_PER_BLOCK - otp_pages; } /* Check User/Factory boundary */ - if (((mtd->writesize * otp_pages) - (from + len)) < 0) - return 0; + if (mode == MTD_OTP_USER) { + if (((mtd->writesize * otp_pages) - (from + len)) < 0) + return 0; + } else { + if (((mtd->writesize * otp_pages) - len) < 0) + return 0; + } onenand_get_device(mtd, FL_OTPING); while (len > 0 && otp_pages > 0) { @@ -2783,13 +3004,12 @@ static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len, *retlen += sizeof(struct otp_info); } else { size_t tmp_retlen; - int size = len; ret = action(mtd, from, len, &tmp_retlen, buf); - buf += size; - len -= size; - *retlen += size; + buf += tmp_retlen; + len -= tmp_retlen; + *retlen += tmp_retlen; if (ret) break; @@ -2902,21 +3122,11 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, u_char *buf = FLEXONENAND(this) ? this->page_buf : this->oob_buf; size_t retlen; int ret; + unsigned int otp_lock_offset = ONENAND_OTP_LOCK_OFFSET; memset(buf, 0xff, FLEXONENAND(this) ? this->writesize : mtd->oobsize); /* - * Note: OTP lock operation - * OTP block : 0xXXFC - * 1st block : 0xXXF3 (If chip support) - * Both : 0xXXF0 (If chip support) - */ - if (FLEXONENAND(this)) - buf[FLEXONENAND_OTP_LOCK_OFFSET] = 0xFC; - else - buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC; - - /* * Write lock mark to 8th word of sector0 of page0 of the spare0. * We write 16 bytes spare area instead of 2 bytes. * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of @@ -2926,10 +3136,30 @@ static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, from = 0; len = FLEXONENAND(this) ? mtd->writesize : 16; + /* + * Note: OTP lock operation + * OTP block : 0xXXFC XX 1111 1100 + * 1st block : 0xXXF3 (If chip support) XX 1111 0011 + * Both : 0xXXF0 (If chip support) XX 1111 0000 + */ + if (FLEXONENAND(this)) + otp_lock_offset = FLEXONENAND_OTP_LOCK_OFFSET; + + /* ONENAND_OTP_AREA | ONENAND_OTP_BLOCK0 | ONENAND_OTP_AREA_BLOCK0 */ + if (otp == 1) + buf[otp_lock_offset] = 0xFC; + else if (otp == 2) + buf[otp_lock_offset] = 0xF3; + else if (otp == 3) + buf[otp_lock_offset] = 0xF0; + else if (otp != 0) + printk(KERN_DEBUG "[OneNAND] Invalid option selected for OTP\n"); + ret = onenand_otp_walk(mtd, from, len, &retlen, buf, do_otp_lock, MTD_OTP_USER); return ret ? : retlen; } + #endif /* CONFIG_MTD_ONENAND_OTP */ /** diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index f57e29e17bb..5509eb06b32 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -1,7 +1,7 @@ /* * linux/include/linux/mtd/onenand.h * - * Copyright (C) 2005-2007 Samsung Electronics + * Copyright © 2005-2009 Samsung Electronics * Kyungmin Park <kyungmin.park@samsung.com> * * This program is free software; you can redistribute it and/or modify @@ -137,6 +137,8 @@ struct onenand_chip { /* * Helper macros */ +#define ONENAND_PAGES_PER_BLOCK (1<<6) + #define ONENAND_CURRENT_BUFFERRAM(this) (this->bufferram_index) #define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1) #define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1) |