aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/boot/dts/kirkwood-lsxl.dtsi4
-rw-r--r--arch/arm/boot/dts/kirkwood-ts219.dtsi5
-rw-r--r--arch/arm/configs/armadillo800eva_defconfig2
-rw-r--r--arch/arm/configs/bcm2835_defconfig19
-rw-r--r--arch/arm/configs/bockw_defconfig27
-rw-r--r--arch/arm/configs/kzm9g_defconfig3
-rw-r--r--arch/arm/configs/multi_v7_defconfig3
-rw-r--r--arch/arm/configs/omap2plus_defconfig2
-rw-r--r--arch/arm/configs/tegra_defconfig23
-rw-r--r--arch/arm/mach-kirkwood/Kconfig9
-rw-r--r--arch/arm/mach-kirkwood/Makefile1
-rw-r--r--arch/arm/mach-kirkwood/board-dt.c4
-rw-r--r--arch/arm/mach-kirkwood/board-lsxl.c16
-rw-r--r--arch/arm/mach-kirkwood/board-sheevaplug.c27
-rw-r--r--arch/arm/mach-kirkwood/board-ts219.c3
-rw-r--r--arch/arm/mach-kirkwood/common.h5
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c10
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c4
-rw-r--r--arch/arm/mach-omap2/board-overo.c3
-rw-r--r--arch/arm/mach-shmobile/board-ape6evm.c15
-rw-r--r--arch/arm/mach-shmobile/board-bockw.c159
-rw-r--r--arch/arm/mach-shmobile/board-kzm9d.c2
-rw-r--r--arch/arm/mach-shmobile/board-kzm9g.c193
-rw-r--r--arch/arm/mach-shmobile/board-lager.c49
-rw-r--r--arch/arm/mach-shmobile/board-marzen.c3
-rw-r--r--arch/arm/mach-ux500/board-mop500-pins.c283
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.c1
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c34
-rw-r--r--arch/arm/mach-ux500/db8500-regs.h3
-rw-r--r--arch/arm/mach-ux500/devices-db8500.c2
-rw-r--r--arch/arm/mach-ux500/id.c6
31 files changed, 792 insertions, 128 deletions
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 37d45c4f88f..996c7fefd25 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -172,6 +172,10 @@
alarm-gpios = <&gpio1 8 0>;
};
+ restart_poweroff {
+ compatible = "restart-poweroff";
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 7c022fd4aef..09c820fc177 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -29,6 +29,11 @@
clock-frequency = <200000000>;
status = "okay";
};
+ poweroff@12100 {
+ compatible = "qnap,power-off";
+ reg = <0x12000 0x100>;
+ clocks = <&gate_clk 7>;
+ };
spi@10600 {
status = "okay";
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index 0f2d80da737..fae939d3d7f 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -86,7 +86,7 @@ CONFIG_TOUCHSCREEN_ST1232=y
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_NR_UARTS=9
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index ce987211a60..34e9780e63b 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -55,14 +55,11 @@ CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
-# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_TTY_PRINTK=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM2835=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BCM2835=y
@@ -70,11 +67,27 @@ CONFIG_SPI=y
CONFIG_SPI_BCM2835=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_SIMPLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_BCM2835=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig
index 6524cdf3b08..845f5cdf62b 100644
--- a/arch/arm/configs/bockw_defconfig
+++ b/arch/arm/configs/bockw_defconfig
@@ -31,6 +31,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp"
CONFIG_CMDLINE_FORCE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
@@ -48,6 +49,14 @@ CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_M25P80=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
@@ -71,7 +80,23 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_I2C=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_HSPI=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_RCAR_PHY=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RX8581=y
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_IOMMU_SUPPORT is not set
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index f6e585b353a..1ad028023a6 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -84,9 +84,12 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_GPIO_PCF857X=y
# CONFIG_HWMON is not set
+CONFIG_MFD_AS3711=y
CONFIG_REGULATOR=y
+CONFIG_REGULATOR_AS3711=y
CONFIG_FB=y
CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_BACKLIGHT_AS3711=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_FB_SH_MOBILE_MERAM=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 4aa64010661..340d550c12b 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1,6 +1,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_ARMADA_370=y
CONFIG_ARCH_SIRF=y
@@ -48,6 +49,8 @@ CONFIG_SERIAL_SIRFSOC=y
CONFIG_SERIAL_SIRFSOC_CONSOLE=y
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_SI=y
CONFIG_I2C=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index abbe31937c6..2ac0ffb12f0 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -210,6 +210,8 @@ CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
CONFIG_USB_TEST=y
+CONFIG_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index f7ba316164d..1effb43dab8 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -21,8 +21,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_TEGRA=y
CONFIG_GPIO_PCA953X=y
+CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
CONFIG_ARCH_TEGRA_114_SOC=y
@@ -36,7 +36,6 @@ CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
@@ -81,7 +80,6 @@ CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_CMA=y
CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
@@ -105,8 +103,8 @@ CONFIG_BRCMFMAC=m
CONFIG_RT2X00=y
CONFIG_RT2800USB=m
CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_TEGRA=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
# CONFIG_LEGACY_PTYS is not set
@@ -121,6 +119,7 @@ CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
+CONFIG_SPI_TEGRA114=y
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_GPIO_PCA953X_IRQ=y
@@ -129,14 +128,15 @@ CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_POWER_SUPPLY=y
CONFIG_BATTERY_SBS=y
+CONFIG_CHARGER_TPS65090=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_SENSORS_LM90=y
-CONFIG_MFD_TPS6586X=y
-CONFIG_MFD_TPS65910=y
CONFIG_MFD_MAX8907=y
-CONFIG_MFD_TPS65090=y
CONFIG_MFD_PALMAS=y
+CONFIG_MFD_TPS65090=y
+CONFIG_MFD_TPS6586X=y
+CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
@@ -171,6 +171,7 @@ CONFIG_SND=y
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_TEGRA=y
+CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_SND_SOC_TEGRA_WM8753=y
CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
@@ -190,7 +191,13 @@ CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_PALMAS=y
@@ -203,7 +210,6 @@ CONFIG_TEGRA20_APB_DMA=y
CONFIG_STAGING=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
-CONFIG_AK8975=y
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
@@ -213,6 +219,7 @@ CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_MEMORY=y
CONFIG_IIO=y
+CONFIG_AK8975=y
CONFIG_PWM=y
CONFIG_PWM_TEGRA=y
CONFIG_EXT2_FS=y
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index e610e137aa3..b634f9650a7 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -227,6 +227,7 @@ config MACH_KM_KIRKWOOD_DT
config MACH_LSXL_DT
bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
+ select POWER_RESET_RESTART
help
Say 'Y' here if you want your kernel to support the
Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
@@ -288,6 +289,13 @@ config MACH_READYNAS_DT
Say 'Y' here if you want your kernel to support the
NETGEAR ReadyNAS Duo v2 using Fattened Device Tree.
+config MACH_SHEEVAPLUG_DT
+ bool "Marvell (eSATA) SheevaPlug (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell (eSATA) SheevaPlug (Flattened Device Tree).
+
config MACH_TOPKICK_DT
bool "USI Topkick (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -300,6 +308,7 @@ config MACH_TS219_DT
select ARCH_KIRKWOOD_DT
select ARM_APPENDED_DTB
select ARM_ATAG_DTB_COMPAT
+ select POWER_RESET_QNAP
help
Say 'Y' here if you want your kernel to support the QNAP
TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 2fdc3a7ad22..ac4cd75dd49 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -39,5 +39,6 @@ obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o
obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o
+obj-$(CONFIG_MACH_SHEEVAPLUG_DT) += board-sheevaplug.o
obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o
obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index cee5dc71cb6..6e122ed3282 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -108,6 +108,9 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("globalscale,guruplug"))
guruplug_dt_init();
+ if (of_machine_is_compatible("globalscale,sheevaplug"))
+ sheevaplug_dt_init();
+
if (of_machine_is_compatible("dlink,dns-kirkwood"))
dnskw_init();
@@ -165,6 +168,7 @@ static void __init kirkwood_dt_init(void)
static const char * const kirkwood_dt_board_compat[] = {
"globalscale,dreamplug",
"globalscale,guruplug",
+ "globalscale,sheevaplug",
"dlink,dns-320",
"dlink,dns-325",
"iom,iconnect",
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index 4ec8b7ae784..348395238df 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -25,19 +25,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-/*
- * On the LS-XHL/LS-CHLv2, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- * to move the switch to ON position
- *
- */
-static void lsxl_power_off(void)
-{
- kirkwood_restart('h', NULL);
-}
-
void __init lsxl_init(void)
{
/*
@@ -46,7 +33,4 @@ void __init lsxl_init(void)
kirkwood_ge00_init(&lsxl_ge00_data);
kirkwood_ge01_init(&lsxl_ge01_data);
-
- /* register power-off method */
- pm_power_off = lsxl_power_off;
}
diff --git a/arch/arm/mach-kirkwood/board-sheevaplug.c b/arch/arm/mach-kirkwood/board-sheevaplug.c
new file mode 100644
index 00000000000..fa389373ca7
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-sheevaplug.c
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-kirkwood/board-sheevaplug.c
+ *
+ * Marvell Sheevaplug Reference Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init sheevaplug_dt_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_ge00_init(&sheevaplug_ge00_data);
+}
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index 4695d5f35fc..860f44ab457 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -23,7 +23,6 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
-#include "tsx1x-common.h"
static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
@@ -38,6 +37,4 @@ void __init qnap_dt_ts219_init(void)
qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&qnap_ts219_ge00_data);
-
- pm_power_off = qnap_tsx1x_power_off;
}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index e2e19b302c2..1c09f3f93fb 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -67,6 +67,11 @@ void guruplug_dt_init(void);
#else
static inline void guruplug_dt_init(void) {};
#endif
+#ifdef CONFIG_MACH_SHEEVAPLUG_DT
+void sheevaplug_dt_init(void);
+#else
+static inline void sheevaplug_dt_init(void) {};
+#endif
#ifdef CONFIG_MACH_TS219_DT
void qnap_dt_ts219_init(void);
#else
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 62a15e289c7..91449c5cb70 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -234,16 +234,26 @@ static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = {
{
I2C_BOARD_INFO("retu-mfd", 0x01),
},
+ {
+ I2C_BOARD_INFO("tahvo-mfd", 0x02),
+ },
};
static void __init nokia770_cbus_init(void)
{
const int retu_irq_gpio = 62;
+ const int tahvo_irq_gpio = 40;
if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
return;
+ if (gpio_request_one(tahvo_irq_gpio, GPIOF_IN, "Tahvo IRQ")) {
+ gpio_free(retu_irq_gpio);
+ return;
+ }
irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(gpio_to_irq(tahvo_irq_gpio), IRQ_TYPE_EDGE_RISING);
nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio);
+ nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio);
i2c_register_board_info(2, nokia770_i2c_board_info_2,
ARRAY_SIZE(nokia770_i2c_board_info_2));
platform_device_register(&nokia770_cbus_device);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index f76d0de7b40..8c026269bac 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -174,6 +174,7 @@ static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = {
.ud_gpio = OMAP3EVM_LCD_PANEL_UD,
};
+#ifdef CONFIG_BROKEN
static void __init omap3_evm_display_init(void)
{
int r;
@@ -193,6 +194,7 @@ static void __init omap3_evm_display_init(void)
else
gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
}
+#endif
static struct omap_dss_device omap3_evm_lcd_device = {
.name = "lcd",
@@ -715,7 +717,9 @@ static void __init omap3_evm_init(void)
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
+#ifdef CONFIG_BROKEN
omap3_evm_display_init();
+#endif
omap3_evm_wl12xx_init();
omap_twl4030_audio_init("omap3evm", NULL);
}
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 4ca6b680aa7..5748b5d06c2 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -68,6 +68,7 @@
#define OVERO_SMSC911X_CS 5
#define OVERO_SMSC911X_GPIO 176
+#define OVERO_SMSC911X_NRESET 64
#define OVERO_SMSC911X2_CS 4
#define OVERO_SMSC911X2_GPIO 65
@@ -122,7 +123,7 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = {
.id = 0,
.cs = OVERO_SMSC911X_CS,
.gpio_irq = OVERO_SMSC911X_GPIO,
- .gpio_reset = -EINVAL,
+ .gpio_reset = OVERO_SMSC911X_NRESET,
.flags = SMSC911X_USE_32BIT,
};
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 55b8c9fef95..5eb0caa6a7d 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -26,6 +26,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
+#include <linux/sh_clk.h>
#include <linux/smsc911x.h>
#include <mach/common.h>
#include <mach/irqs.h>
@@ -65,7 +66,21 @@ static const struct pinctrl_map ape6evm_pinctrl_map[] = {
static void __init ape6evm_add_standard_devices(void)
{
+
+ struct clk *parent;
+ struct clk *mp;
+
r8a73a4_clock_init();
+
+ /* MP clock parent = extal2 */
+ parent = clk_get(NULL, "extal2");
+ mp = clk_get(NULL, "mp");
+ BUG_ON(IS_ERR(parent) || IS_ERR(mp));
+
+ clk_set_parent(mp, parent);
+ clk_put(parent);
+ clk_put(mp);
+
pinctrl_register_mappings(ape6evm_pinctrl_map,
ARRAY_SIZE(ape6evm_pinctrl_map));
r8a73a4_pinmux_init();
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index 7ed2401b899..d5554646916 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -18,14 +18,52 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/partitions.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7778.h>
#include <asm/mach/arch.h>
+/*
+ * CN9(Upper side) SCIF/RCAN selection
+ *
+ * 1,4 3,6
+ * SW40 SCIF RCAN
+ * SW41 SCIF RCAN
+ */
+
+/*
+ * MMC (CN26) pin
+ *
+ * SW6 (D2) 3 pin
+ * SW7 (D5) ON
+ * SW8 (D3) 3 pin
+ * SW10 (D4) 1 pin
+ * SW12 (CLK) 1 pin
+ * SW13 (D6) 3 pin
+ * SW14 (CMD) ON
+ * SW15 (D6) 1 pin
+ * SW16 (D0) ON
+ * SW17 (D1) ON
+ * SW18 (D7) 3 pin
+ * SW19 (MMC) 1 pin
+ */
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static struct smsc911x_platform_config smsc911x_data = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
@@ -38,36 +76,128 @@ static struct resource smsc911x_resources[] = {
DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
};
+/* USB */
static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
+/* SDHI */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED,
+ .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct sh_eth_plat_data ether_platform_data __initdata = {
+ .phy = 0x01,
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+ .register_type = SH_ETH_REG_FAST_RCAR,
+ .phy_interface = PHY_INTERFACE_MODE_RMII,
+ /*
+ * Although the LINK signal is available on the board, it's connected to
+ * the link/activity LED output of the PHY, thus the link disappears and
+ * reappears after each packet. We'd be better off ignoring such signal
+ * and getting the link state from the PHY indirectly.
+ */
+ .no_ether_link = 1,
+};
+
+/* I2C */
+static struct i2c_board_info i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("rx8581", 0x51),
+ },
+};
+
+/* HSPI*/
+static struct mtd_partition m25p80_spi_flash_partitions[] = {
+ {
+ .name = "data(spi)",
+ .size = 0x0100000,
+ .offset = 0,
+ },
+};
+
+static struct flash_platform_data spi_flash_data = {
+ .name = "m25p80",
+ .type = "s25fl008k",
+ .parts = m25p80_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(m25p80_spi_flash_partitions),
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 104000000,
+ .chip_select = 0,
+ .bus_num = 0,
+ .mode = SPI_MODE_0,
+ .platform_data = &spi_flash_data,
+ },
+};
+
+/* MMC */
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+ .sup_pclk = 0,
+ .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+ .caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NEEDS_POLL,
+};
+
static const struct pinctrl_map bockw_pinctrl_map[] = {
+ /* Ether */
+ PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
+ "ether_rmii", "ether"),
+ /* HSPI0 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778",
+ "hspi0_a", "hspi0"),
+ /* MMC */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
+ "mmc_data8", "mmc"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
+ "mmc_ctrl", "mmc"),
/* SCIF0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
"scif0_data_a", "scif0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
"scif0_ctrl", "scif0"),
+ /* USB */
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
"usb0", "usb0"),
PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
"usb1", "usb1"),
+ /* SDHI0 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+ "sdhi0", "sdhi0"),
};
+#define FPGA 0x18200000
#define IRQ0MR 0x30
+#define PFC 0xfffc0000
+#define PUPR4 0x110
static void __init bockw_init(void)
{
- void __iomem *fpga;
+ void __iomem *base;
r8a7778_clock_init();
r8a7778_init_irq_extpin(1);
r8a7778_add_standard_devices();
r8a7778_add_usb_phy_device(&usb_phy_platform_data);
+ r8a7778_add_ether_device(&ether_platform_data);
+ r8a7778_add_i2c_device(0);
+ r8a7778_add_hspi_device(0);
+ r8a7778_add_mmc_device(&sh_mmcif_plat);
+ i2c_register_board_info(0, i2c0_devices,
+ ARRAY_SIZE(i2c0_devices));
+ spi_register_board_info(spi_board_info,
+ ARRAY_SIZE(spi_board_info));
pinctrl_register_mappings(bockw_pinctrl_map,
ARRAY_SIZE(bockw_pinctrl_map));
r8a7778_pinmux_init();
- fpga = ioremap_nocache(0x18200000, SZ_1M);
- if (fpga) {
+ /* for SMSC */
+ base = ioremap_nocache(FPGA, SZ_1M);
+ if (base) {
/*
* CAUTION
*
@@ -75,16 +205,33 @@ static void __init bockw_init(void)
* it should be cared in the future
* Now, it is assuming IRQ0 was used only from SMSC.
*/
- u16 val = ioread16(fpga + IRQ0MR);
+ u16 val = ioread16(base + IRQ0MR);
val &= ~(1 << 4); /* enable SMSC911x */
- iowrite16(val, fpga + IRQ0MR);
- iounmap(fpga);
+ iowrite16(val, base + IRQ0MR);
+ iounmap(base);
+
+ regulator_register_fixed(0, dummy_supplies,
+ ARRAY_SIZE(dummy_supplies));
platform_device_register_resndata(
&platform_bus, "smsc911x", -1,
smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
&smsc911x_data, sizeof(smsc911x_data));
}
+
+ /* for SDHI */
+ base = ioremap_nocache(PFC, 0x200);
+ if (base) {
+ /*
+ * FIXME
+ *
+ * SDHI CD/WP pin needs pull-up
+ */
+ iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
+ iounmap(base);
+
+ r8a7778_sdhi_init(0, &sdhi0_info);
+ }
}
static const char *bockw_boards_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index c016ccd9243..4368000e112 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -56,7 +56,7 @@ static struct smsc911x_platform_config smsc911x_platdata = {
static struct platform_device smsc91x_device = {
.name = "smsc911x",
- .id = 0,
+ .id = -1,
.dev = {
.platform_data = &smsc911x_platdata,
},
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 1fdf05cb6da..165483c9bee 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -29,6 +29,7 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/as3711.h>
#include <linux/mfd/tmio.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
@@ -606,6 +607,140 @@ static struct platform_device fsi_ak4648_device = {
};
/* I2C */
+
+/* StepDown1 is used to supply 1.315V to the CPU */
+static struct regulator_init_data as3711_sd1 = {
+ .constraints = {
+ .name = "1.315V CPU",
+ .boot_on = 1,
+ .always_on = 1,
+ .min_uV = 1315000,
+ .max_uV = 1335000,
+ },
+};
+
+/* StepDown2 is used to supply 1.8V to the CPU and to the board */
+static struct regulator_init_data as3711_sd2 = {
+ .constraints = {
+ .name = "1.8V",
+ .boot_on = 1,
+ .always_on = 1,
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ },
+};
+
+/*
+ * StepDown3 is switched in parallel with StepDown2, seems to be off,
+ * according to read-back pre-set register values
+ */
+
+/* StepDown4 is used to supply 1.215V to the CPU and to the board */
+static struct regulator_init_data as3711_sd4 = {
+ .constraints = {
+ .name = "1.215V",
+ .boot_on = 1,
+ .always_on = 1,
+ .min_uV = 1215000,
+ .max_uV = 1235000,
+ },
+};
+
+/* LDO1 is unused and unconnected */
+
+/* LDO2 is used to supply 2.8V to the CPU */
+static struct regulator_init_data as3711_ldo2 = {
+ .constraints = {
+ .name = "2.8V CPU",
+ .boot_on = 1,
+ .always_on = 1,
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+};
+
+/* LDO3 is used to supply 3.0V to the CPU */
+static struct regulator_init_data as3711_ldo3 = {
+ .constraints = {
+ .name = "3.0V CPU",
+ .boot_on = 1,
+ .always_on = 1,
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ },
+};
+
+/* LDO4 is used to supply 2.8V to the board */
+static struct regulator_init_data as3711_ldo4 = {
+ .constraints = {
+ .name = "2.8V",
+ .boot_on = 1,
+ .always_on = 1,
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+};
+
+/* LDO5 is switched parallel to LDO4, also set to 2.8V */
+static struct regulator_init_data as3711_ldo5 = {
+ .constraints = {
+ .name = "2.8V #2",
+ .boot_on = 1,
+ .always_on = 1,
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ },
+};
+
+/* LDO6 is unused and unconnected */
+
+/* LDO7 is used to supply 1.15V to the CPU */
+static struct regulator_init_data as3711_ldo7 = {
+ .constraints = {
+ .name = "1.15V CPU",
+ .boot_on = 1,
+ .always_on = 1,
+ .min_uV = 1150000,
+ .max_uV = 1150000,
+ },
+};
+
+/* LDO8 is switched parallel to LDO7, also set to 1.15V */
+static struct regulator_init_data as3711_ldo8 = {
+ .constraints = {
+ .name = "1.15V CPU #2",
+ .boot_on = 1,
+ .always_on = 1,
+ .min_uV = 1150000,
+ .max_uV = 1150000,
+ },
+};
+
+static struct as3711_platform_data as3711_pdata = {
+ .regulator = {
+ .init_data = {
+ [AS3711_REGULATOR_SD_1] = &as3711_sd1,
+ [AS3711_REGULATOR_SD_2] = &as3711_sd2,
+ [AS3711_REGULATOR_SD_4] = &as3711_sd4,
+ [AS3711_REGULATOR_LDO_2] = &as3711_ldo2,
+ [AS3711_REGULATOR_LDO_3] = &as3711_ldo3,
+ [AS3711_REGULATOR_LDO_4] = &as3711_ldo4,
+ [AS3711_REGULATOR_LDO_5] = &as3711_ldo5,
+ [AS3711_REGULATOR_LDO_7] = &as3711_ldo7,
+ [AS3711_REGULATOR_LDO_8] = &as3711_ldo8,
+ },
+ },
+ .backlight = {
+ .su2_fb = "sh_mobile_lcdc_fb.0",
+ .su2_max_uA = 36000,
+ .su2_feedback = AS3711_SU2_CURR_AUTO,
+ .su2_fbprot = AS3711_SU2_GPIO4,
+ .su2_auto_curr1 = true,
+ .su2_auto_curr2 = true,
+ .su2_auto_curr3 = true,
+ },
+};
+
static struct pcf857x_platform_data pcf8575_pdata = {
.gpio_base = GPIO_PCF8575_BASE,
};
@@ -625,6 +760,11 @@ static struct i2c_board_info i2c0_devices[] = {
I2C_BOARD_INFO("adxl34x", 0x1d),
.irq = irq_pin(26), /* IRQ26 */
},
+ {
+ I2C_BOARD_INFO("as3711", 0x40),
+ .irq = intcs_evt2irq(0x3300), /* IRQ24 */
+ .platform_data = &as3711_pdata,
+ },
};
static struct i2c_board_info i2c1_devices[] = {
@@ -715,59 +855,6 @@ static const struct pinctrl_map kzm_pinctrl_map[] = {
"usb_vbus", "usb"),
};
-/*
- * FIXME
- *
- * This is quick hack for enabling LCDC backlight
- */
-static int __init as3711_enable_lcdc_backlight(void)
-{
- struct i2c_adapter *a = i2c_get_adapter(0);
- struct i2c_msg msg;
- int i, ret;
- __u8 magic[] = {
- 0x40, 0x2a,
- 0x43, 0x3c,
- 0x44, 0x3c,
- 0x45, 0x3c,
- 0x54, 0x03,
- 0x51, 0x00,
- 0x51, 0x01,
- 0xff, 0x00, /* wait */
- 0x43, 0xf0,
- 0x44, 0xf0,
- 0x45, 0xf0,
- };
-
- if (!of_machine_is_compatible("renesas,kzm9g"))
- return 0;
-
- if (!a)
- return 0;
-
- msg.addr = 0x40;
- msg.len = 2;
- msg.flags = 0;
-
- for (i = 0; i < ARRAY_SIZE(magic); i += 2) {
- msg.buf = magic + i;
-
- if (0xff == msg.buf[0]) {
- udelay(500);
- continue;
- }
-
- ret = i2c_transfer(a, &msg, 1);
- if (ret < 0) {
- pr_err("i2c transfer fail\n");
- break;
- }
- }
-
- return 0;
-}
-device_initcall(as3711_enable_lcdc_backlight);
-
static void __init kzm_init(void)
{
regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 6114edd0a97..d73e21d3ea8 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -18,16 +18,59 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/kernel.h>
+#include <linux/leds.h>
#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_device.h>
#include <mach/common.h>
#include <mach/r8a7790.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+/* LEDS */
+static struct gpio_led lager_leds[] = {
+ {
+ .name = "led8",
+ .gpio = RCAR_GP_PIN(5, 17),
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }, {
+ .name = "led7",
+ .gpio = RCAR_GP_PIN(4, 23),
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }, {
+ .name = "led6",
+ .gpio = RCAR_GP_PIN(4, 22),
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+};
+
+static __initdata struct gpio_led_platform_data lager_leds_pdata = {
+ .leds = lager_leds,
+ .num_leds = ARRAY_SIZE(lager_leds),
+};
+
+/* GPIO KEY */
+#define GPIO_KEY(c, g, d, ...) \
+ { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static __initdata struct gpio_keys_button gpio_buttons[] = {
+ GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"),
+ GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"),
+ GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"),
+ GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"),
+};
+
+static __initdata struct gpio_keys_platform_data lager_keys_pdata = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+};
+
static const struct pinctrl_map lager_pinctrl_map[] = {
/* SCIF0 (CN19: DEBUG SERIAL0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
@@ -46,6 +89,12 @@ static void __init lager_add_standard_devices(void)
r8a7790_pinmux_init();
r8a7790_add_standard_devices();
+ platform_device_register_data(&platform_bus, "leds-gpio", -1,
+ &lager_leds_pdata,
+ sizeof(lager_leds_pdata));
+ platform_device_register_data(&platform_bus, "gpio-keys", -1,
+ &lager_keys_pdata,
+ sizeof(lager_keys_pdata));
}
static const char *lager_boards_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index b1b41b199f9..a7d1010505b 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -67,7 +67,7 @@ static struct resource smsc911x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gic_iid(0x3c), /* IRQ 1 */
+ .start = irq_pin(1), /* IRQ 1 */
.flags = IORESOURCE_IRQ,
},
};
@@ -231,6 +231,7 @@ static void __init marzen_init(void)
pinctrl_register_mappings(marzen_pinctrl_map,
ARRAY_SIZE(marzen_pinctrl_map));
r8a7779_pinmux_init();
+ r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */
r8a7779_add_standard_devices();
r8a7779_add_usb_phy_device(&usb_phy_platform_data);
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 947bd9eca07..7936d40a5c3 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -9,6 +9,7 @@
#include <linux/bug.h>
#include <linux/string.h>
#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <asm/mach-types.h>
@@ -34,6 +35,11 @@ BIAS(in_pd, PIN_INPUT_PULLDOWN);
BIAS(out_hi, PIN_OUTPUT_HIGH);
BIAS(out_lo, PIN_OUTPUT_LOW);
BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE);
+
+BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0));
+BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1));
+BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0));
+
/* These also force them into GPIO mode */
BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED);
BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED);
@@ -42,8 +48,6 @@ BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SL
BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED);
BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
/* Sleep modes */
-BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE);
BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
@@ -54,8 +58,6 @@ BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE);
BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|
@@ -97,6 +99,252 @@ BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|
#define DB8500_PIN_STATE(pin, conf, dev, state) \
PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf)
+#define AB8500_MUX_HOG(group, func) \
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func)
+#define AB8500_PIN_HOG(pin, conf) \
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8500.0", pin, abx500_##conf)
+
+#define AB8500_MUX_STATE(group, func, dev, state) \
+ PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8500.0", group, func)
+#define AB8500_PIN_STATE(pin, conf, dev, state) \
+ PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8500.0", pin, abx500_##conf)
+
+#define AB8505_MUX_HOG(group, func) \
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8505.0", group, func)
+#define AB8505_PIN_HOG(pin, conf) \
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8505.0", pin, abx500_##conf)
+
+#define AB8505_MUX_STATE(group, func, dev, state) \
+ PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8505.0", group, func)
+#define AB8505_PIN_STATE(pin, conf, dev, state) \
+ PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8505.0", pin, abx500_##conf)
+
+static struct pinctrl_map __initdata ab8500_pinmap[] = {
+ /* Sysclkreq2 */
+ AB8500_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.35", PINCTRL_STATE_DEFAULT),
+ AB8500_PIN_STATE("GPIO1_T10", in_nopull, "regulator.35", PINCTRL_STATE_DEFAULT),
+ /* sysclkreq2 disable, mux in gpio configured in input pulldown */
+ AB8500_MUX_STATE("gpio1_a_1", "gpio", "regulator.35", PINCTRL_STATE_SLEEP),
+ AB8500_PIN_STATE("GPIO1_T10", in_pd, "regulator.35", PINCTRL_STATE_SLEEP),
+
+ /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
+ AB8500_MUX_HOG("gpio2_a_1", "gpio"),
+ AB8500_PIN_HOG("GPIO2_T9", in_pd),
+
+ /* Sysclkreq4 */
+ AB8500_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
+ AB8500_PIN_STATE("GPIO3_U9", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
+ /* sysclkreq4 disable, mux in gpio configured in input pulldown */
+ AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
+ AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
+
+ /* pins 4 is muxed in GPIO, configured in INPUT PULL DOWN */
+ AB8500_MUX_HOG("gpio4_a_1", "gpio"),
+ AB8500_PIN_HOG("GPIO4_W2", in_pd),
+
+ /*
+ * pins 6,7,8 and 9 are muxed in YCBCR0123
+ * configured in INPUT PULL UP
+ */
+ AB8500_MUX_HOG("ycbcr0123_d_1", "ycbcr"),
+ AB8500_PIN_HOG("GPIO6_Y18", in_nopull),
+ AB8500_PIN_HOG("GPIO7_AA20", in_nopull),
+ AB8500_PIN_HOG("GPIO8_W18", in_nopull),
+ AB8500_PIN_HOG("GPIO9_AA19", in_nopull),
+
+ /*
+ * pins 10,11,12 and 13 are muxed in GPIO
+ * configured in INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("gpio10_d_1", "gpio"),
+ AB8500_PIN_HOG("GPIO10_U17", in_pd),
+
+ AB8500_MUX_HOG("gpio11_d_1", "gpio"),
+ AB8500_PIN_HOG("GPIO11_AA18", in_pd),
+
+ AB8500_MUX_HOG("gpio12_d_1", "gpio"),
+ AB8500_PIN_HOG("GPIO12_U16", in_pd),
+
+ AB8500_MUX_HOG("gpio13_d_1", "gpio"),
+ AB8500_PIN_HOG("GPIO13_W17", in_pd),
+
+ /*
+ * pins 14,15 are muxed in PWM1 and PWM2
+ * configured in INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("pwmout1_d_1", "pwmout"),
+ AB8500_PIN_HOG("GPIO14_F14", in_pd),
+
+ AB8500_MUX_HOG("pwmout2_d_1", "pwmout"),
+ AB8500_PIN_HOG("GPIO15_B17", in_pd),
+
+ /*
+ * pins 16 is muxed in GPIO
+ * configured in INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("gpio16_a_1", "gpio"),
+ AB8500_PIN_HOG("GPIO14_F14", in_pd),
+
+ /*
+ * pins 17,18,19 and 20 are muxed in AUDIO interface 1
+ * configured in INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("adi1_d_1", "adi1"),
+ AB8500_PIN_HOG("GPIO17_P5", in_pd),
+ AB8500_PIN_HOG("GPIO18_R5", in_pd),
+ AB8500_PIN_HOG("GPIO19_U5", in_pd),
+ AB8500_PIN_HOG("GPIO20_T5", in_pd),
+
+ /*
+ * pins 21,22 and 23 are muxed in USB UICC
+ * configured in INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("usbuicc_d_1", "usbuicc"),
+ AB8500_PIN_HOG("GPIO21_H19", in_pd),
+ AB8500_PIN_HOG("GPIO22_G20", in_pd),
+ AB8500_PIN_HOG("GPIO23_G19", in_pd),
+
+ /*
+ * pins 24,25 are muxed in GPIO
+ * configured in INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("gpio24_a_1", "gpio"),
+ AB8500_PIN_HOG("GPIO24_T14", in_pd),
+
+ AB8500_MUX_HOG("gpio25_a_1", "gpio"),
+ AB8500_PIN_HOG("GPIO25_R16", in_pd),
+
+ /*
+ * pins 26 is muxed in GPIO
+ * configured in OUTPUT LOW
+ */
+ AB8500_MUX_HOG("gpio26_d_1", "gpio"),
+ AB8500_PIN_HOG("GPIO26_M16", out_lo),
+
+ /*
+ * pins 27,28 are muxed in DMIC12
+ * configured in INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("dmic12_d_1", "dmic"),
+ AB8500_PIN_HOG("GPIO27_J6", in_pd),
+ AB8500_PIN_HOG("GPIO28_K6", in_pd),
+
+ /*
+ * pins 29,30 are muxed in DMIC34
+ * configured in INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("dmic34_d_1", "dmic"),
+ AB8500_PIN_HOG("GPIO29_G6", in_pd),
+ AB8500_PIN_HOG("GPIO30_H6", in_pd),
+
+ /*
+ * pins 31,32 are muxed in DMIC56
+ * configured in INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("dmic56_d_1", "dmic"),
+ AB8500_PIN_HOG("GPIO31_F5", in_pd),
+ AB8500_PIN_HOG("GPIO32_G5", in_pd),
+
+ /*
+ * pins 34 is muxed in EXTCPENA
+ * configured INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("extcpena_d_1", "extcpena"),
+ AB8500_PIN_HOG("GPIO34_R17", in_pd),
+
+ /*
+ * pins 35 is muxed in GPIO
+ * configured in OUTPUT LOW
+ */
+ AB8500_MUX_HOG("gpio35_d_1", "gpio"),
+ AB8500_PIN_HOG("GPIO35_W15", in_pd),
+
+ /*
+ * pins 36,37,38 and 39 are muxed in GPIO
+ * configured in INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("gpio36_a_1", "gpio"),
+ AB8500_PIN_HOG("GPIO36_A17", in_pd),
+
+ AB8500_MUX_HOG("gpio37_a_1", "gpio"),
+ AB8500_PIN_HOG("GPIO37_E15", in_pd),
+
+ AB8500_MUX_HOG("gpio38_a_1", "gpio"),
+ AB8500_PIN_HOG("GPIO38_C17", in_pd),
+
+ AB8500_MUX_HOG("gpio39_a_1", "gpio"),
+ AB8500_PIN_HOG("GPIO39_E16", in_pd),
+
+ /*
+ * pins 40 and 41 are muxed in MODCSLSDA
+ * configured INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("modsclsda_d_1", "modsclsda"),
+ AB8500_PIN_HOG("GPIO40_T19", in_pd),
+ AB8500_PIN_HOG("GPIO41_U19", in_pd),
+
+ /*
+ * pins 42 is muxed in GPIO
+ * configured INPUT PULL DOWN
+ */
+ AB8500_MUX_HOG("gpio42_a_1", "gpio"),
+ AB8500_PIN_HOG("GPIO42_U2", in_pd),
+};
+
+static struct pinctrl_map __initdata ab8505_pinmap[] = {
+ /* Sysclkreq2 */
+ AB8505_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
+ AB8505_PIN_STATE("GPIO1_N4", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
+ /* sysclkreq2 disable, mux in gpio configured in input pulldown */
+ AB8505_MUX_STATE("gpio1_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
+ AB8505_PIN_STATE("GPIO1_N4", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
+
+ /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
+ AB8505_MUX_HOG("gpio2_a_1", "gpio"),
+ AB8505_PIN_HOG("GPIO2_R5", in_pd),
+
+ /* Sysclkreq4 */
+ AB8505_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.37", PINCTRL_STATE_DEFAULT),
+ AB8505_PIN_STATE("GPIO3_P5", in_nopull, "regulator.37", PINCTRL_STATE_DEFAULT),
+ /* sysclkreq4 disable, mux in gpio configured in input pulldown */
+ AB8505_MUX_STATE("gpio3_a_1", "gpio", "regulator.37", PINCTRL_STATE_SLEEP),
+ AB8505_PIN_STATE("GPIO3_P5", in_pd, "regulator.37", PINCTRL_STATE_SLEEP),
+
+ AB8505_MUX_HOG("gpio10_d_1", "gpio"),
+ AB8505_PIN_HOG("GPIO10_B16", in_pd),
+
+ AB8505_MUX_HOG("gpio11_d_1", "gpio"),
+ AB8505_PIN_HOG("GPIO11_B17", in_pd),
+
+ AB8505_MUX_HOG("gpio13_d_1", "gpio"),
+ AB8505_PIN_HOG("GPIO13_D17", in_nopull),
+
+ AB8505_MUX_HOG("pwmout1_d_1", "pwmout"),
+ AB8505_PIN_HOG("GPIO14_C16", in_pd),
+
+ AB8505_MUX_HOG("adi2_d_1", "adi2"),
+ AB8505_PIN_HOG("GPIO17_P2", in_pd),
+ AB8505_PIN_HOG("GPIO18_N3", in_pd),
+ AB8505_PIN_HOG("GPIO19_T1", in_pd),
+ AB8505_PIN_HOG("GPIO20_P3", in_pd),
+
+ AB8505_MUX_HOG("gpio34_a_1", "gpio"),
+ AB8505_PIN_HOG("GPIO34_H14", in_pd),
+
+ AB8505_MUX_HOG("modsclsda_d_1", "modsclsda"),
+ AB8505_PIN_HOG("GPIO40_J15", in_pd),
+ AB8505_PIN_HOG("GPIO41_J14", in_pd),
+
+ AB8505_MUX_HOG("gpio50_d_1", "gpio"),
+ AB8505_PIN_HOG("GPIO50_L4", in_nopull),
+
+ AB8505_MUX_HOG("resethw_d_1", "resethw"),
+ AB8505_PIN_HOG("GPIO52_D16", in_pd),
+
+ AB8505_MUX_HOG("service_d_1", "service"),
+ AB8505_PIN_HOG("GPIO53_D15", in_pd),
+};
+
/* Pin control settings */
static struct pinctrl_map __initdata mop500_family_pinmap[] = {
/*
@@ -174,17 +422,12 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"),
DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"),
/* MSP1 for ALSA codec */
- DB8500_MUX("msp1txrx_a_1", "msp1", "ux500-msp-i2s.1"),
- DB8500_MUX("msp1_a_1", "msp1", "ux500-msp-i2s.1"),
- DB8500_PIN("GPIO33_AF2", out_lo_slpm_nowkup, "ux500-msp-i2s.1"),
- DB8500_PIN("GPIO34_AE1", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
- DB8500_PIN("GPIO35_AE2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
- DB8500_PIN("GPIO36_AG2", in_nopull_slpm_nowkup, "ux500-msp-i2s.1"),
- /* MSP1 sleep state */
- DB8500_PIN_SLEEP("GPIO33_AF2", slpm_out_lo_wkup, "ux500-msp-i2s.1"),
- DB8500_PIN_SLEEP("GPIO34_AE1", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
- DB8500_PIN_SLEEP("GPIO35_AE2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
- DB8500_PIN_SLEEP("GPIO36_AG2", slpm_in_nopull_wkup, "ux500-msp-i2s.1"),
+ DB8500_MUX_HOG("msp1txrx_a_1", "msp1"),
+ DB8500_MUX_HOG("msp1_a_1", "msp1"),
+ DB8500_PIN_HOG("GPIO33_AF2", out_lo_slpm_nowkup),
+ DB8500_PIN_HOG("GPIO34_AE1", in_nopull_slpm_nowkup),
+ DB8500_PIN_HOG("GPIO35_AE2", in_nopull_slpm_nowkup),
+ DB8500_PIN_HOG("GPIO36_AG2", in_nopull_slpm_nowkup),
/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
@@ -821,6 +1064,12 @@ void __init mop500_pinmaps_init(void)
pinctrl_register_mappings(mop500_pinmap,
ARRAY_SIZE(mop500_pinmap));
mop500_href_family_pinmaps_init();
+ if (machine_is_u8520())
+ pinctrl_register_mappings(ab8505_pinmap,
+ ARRAY_SIZE(ab8505_pinmap));
+ else
+ pinctrl_register_mappings(ab8500_pinmap,
+ ARRAY_SIZE(ab8500_pinmap));
}
void __init snowball_pinmaps_init(void)
@@ -831,6 +1080,8 @@ void __init snowball_pinmaps_init(void)
ARRAY_SIZE(snowball_pinmap));
pinctrl_register_mappings(u8500_pinmap,
ARRAY_SIZE(u8500_pinmap));
+ pinctrl_register_mappings(ab8500_pinmap,
+ ARRAY_SIZE(ab8500_pinmap));
}
void __init hrefv60_pinmaps_init(void)
@@ -840,4 +1091,6 @@ void __init hrefv60_pinmaps_init(void)
pinctrl_register_mappings(hrefv60_pinmap,
ARRAY_SIZE(hrefv60_pinmap));
mop500_href_family_pinmaps_init();
+ pinctrl_register_mappings(ab8500_pinmap,
+ ARRAY_SIZE(ab8500_pinmap));
}
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index d6b7c8556fa..0dc44c68342 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -999,7 +999,6 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
.num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
};
-/* Use the AB8500 init settings for AB8505 as they are the same right now */
struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
.reg_init = ab8505_reg_init,
.num_reg_init = ARRAY_SIZE(ab8505_reg_init),
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 0ef38775a0c..43be3e0d4e3 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -52,11 +52,13 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
#endif
struct mmci_platform_data mop500_sdi0_data = {
- .ocr_mask = MMC_VDD_29_30,
- .f_max = 50000000,
+ .f_max = 100000000,
.capabilities = MMC_CAP_4_BIT_DATA |
MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_MMC_HIGHSPEED,
+ MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_ERASE |
+ MMC_CAP_UHS_SDR12 |
+ MMC_CAP_UHS_SDR25,
.gpio_wp = -1,
.sigdir = MCI_ST_FBCLKEN |
MCI_ST_CMDDIREN |
@@ -106,8 +108,9 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
struct mmci_platform_data mop500_sdi1_data = {
.ocr_mask = MMC_VDD_29_30,
- .f_max = 50000000,
- .capabilities = MMC_CAP_4_BIT_DATA,
+ .f_max = 100000000,
+ .capabilities = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_NONREMOVABLE,
.gpio_cd = -1,
.gpio_wp = -1,
#ifdef CONFIG_STE_DMA40
@@ -143,9 +146,13 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
struct mmci_platform_data mop500_sdi2_data = {
.ocr_mask = MMC_VDD_165_195,
- .f_max = 50000000,
- .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED,
+ .f_max = 100000000,
+ .capabilities = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NONREMOVABLE |
+ MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_ERASE |
+ MMC_CAP_CMD23,
.gpio_cd = -1,
.gpio_wp = -1,
#ifdef CONFIG_STE_DMA40
@@ -180,10 +187,13 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
#endif
struct mmci_platform_data mop500_sdi4_data = {
- .ocr_mask = MMC_VDD_29_30,
- .f_max = 50000000,
- .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED,
+ .f_max = 100000000,
+ .capabilities = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NONREMOVABLE |
+ MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_ERASE |
+ MMC_CAP_CMD23,
.gpio_cd = -1,
.gpio_wp = -1,
#ifdef CONFIG_STE_DMA40
diff --git a/arch/arm/mach-ux500/db8500-regs.h b/arch/arm/mach-ux500/db8500-regs.h
index b2d7a0b9862..27399553c84 100644
--- a/arch/arm/mach-ux500/db8500-regs.h
+++ b/arch/arm/mach-ux500/db8500-regs.h
@@ -102,7 +102,6 @@
#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
#define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000)
#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
-#define U9540_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x6A000)
#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000)
#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
@@ -184,7 +183,7 @@
#define U8500_IO_VIRTUAL 0xf0000000
#define U8500_IO_PHYSICAL 0xa0000000
/* This is where we map in the ROM to check ASIC IDs */
-#define UX500_VIRT_ROM 0xf0000000
+#define UX500_VIRT_ROM IOMEM(0xf0000000)
/* This macro is used in assembly, so no cast */
#define IO_ADDRESS(x) \
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 1cf94ce0fee..ddbdcda8306 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -227,7 +227,7 @@ static struct resource db8500_prcmu_res[] = {
{
.name = "prcmu-tcpm",
.start = U8500_PRCMU_TCPM_BASE,
- .end = U8500_PRCMU_TCPM_BASE + SZ_4K - 1,
+ .end = U8500_PRCMU_TCPM_BASE + SZ_32K - 1,
.flags = IORESOURCE_MEM,
},
};
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
index 0d33d1a0695..392f2fdb37d 100644
--- a/arch/arm/mach-ux500/id.c
+++ b/arch/arm/mach-ux500/id.c
@@ -21,11 +21,11 @@
struct dbx500_asic_id dbx500_id;
-static unsigned int ux500_read_asicid(phys_addr_t addr)
+static unsigned int __init ux500_read_asicid(phys_addr_t addr)
{
phys_addr_t base = addr & ~0xfff;
struct map_desc desc = {
- .virtual = UX500_VIRT_ROM,
+ .virtual = (unsigned long)UX500_VIRT_ROM,
.pfn = __phys_to_pfn(base),
.length = SZ_16K,
.type = MT_DEVICE,
@@ -37,7 +37,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr)
local_flush_tlb_all();
flush_cache_all();
- return readl(IOMEM(UX500_VIRT_ROM + (addr & 0xfff)));
+ return readl(UX500_VIRT_ROM + (addr & 0xfff));
}
static void ux500_print_soc_info(unsigned int asicid)