diff options
| -rw-r--r-- | drivers/mtd/devices/m25p80.c | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index a48f152e318..26b14f9fcac 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -43,6 +43,7 @@ #define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ #define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ #define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ +#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ #define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ #define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ @@ -692,6 +693,7 @@ struct flash_info { #define M25P_NO_ERASE 0x02 /* No erase command needed */ #define SST_WRITE 0x04 /* use SST byte programming */ #define M25P_NO_FR 0x08 /* Can't do fastread */ +#define SECT_4K_PMC 0x10 /* OPCODE_BE_4K_PMC works uniformly */ }; #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ @@ -773,6 +775,11 @@ static const struct spi_device_id m25p_ids[] = { { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, + /* PMC */ + { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, + { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, + { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) }, + /* Spansion -- single (large) sector size only, at least * for the chips listed here (without boot sectors). */ @@ -1026,6 +1033,9 @@ static int m25p_probe(struct spi_device *spi) if (info->flags & SECT_4K) { flash->erase_opcode = OPCODE_BE_4K; flash->mtd.erasesize = 4096; + } else if (info->flags & SECT_4K_PMC) { + flash->erase_opcode = OPCODE_BE_4K_PMC; + flash->mtd.erasesize = 4096; } else { flash->erase_opcode = OPCODE_SE; flash->mtd.erasesize = info->sector_size; |