aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/host/ehci-pci.c39
-rw-r--r--drivers/usb/host/pci-quirks.c63
-rw-r--r--drivers/usb/host/pci-quirks.h2
-rw-r--r--drivers/usb/host/xhci-pci.c26
-rw-r--r--drivers/usb/host/xhci-ring.c89
-rw-r--r--drivers/usb/host/xhci.c240
-rw-r--r--drivers/usb/host/xhci.h22
-rw-r--r--include/linux/pci_ids.h1
8 files changed, 413 insertions, 69 deletions
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 660b80a75ca..1102ce65a3a 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -348,11 +348,50 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
return rc;
}
+static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev)
+{
+ return pdev->class == PCI_CLASS_SERIAL_USB_EHCI &&
+ pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == 0x1E26;
+}
+
+static void ehci_enable_xhci_companion(void)
+{
+ struct pci_dev *companion = NULL;
+
+ /* The xHCI and EHCI controllers are not on the same PCI slot */
+ for_each_pci_dev(companion) {
+ if (!usb_is_intel_switchable_xhci(companion))
+ continue;
+ usb_enable_xhci_ports(companion);
+ return;
+ }
+}
+
static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ /* The BIOS on systems with the Intel Panther Point chipset may or may
+ * not support xHCI natively. That means that during system resume, it
+ * may switch the ports back to EHCI so that users can use their
+ * keyboard to select a kernel from GRUB after resume from hibernate.
+ *
+ * The BIOS is supposed to remember whether the OS had xHCI ports
+ * enabled before resume, and switch the ports back to xHCI when the
+ * BIOS/OS semaphore is written, but we all know we can't trust BIOS
+ * writers.
+ *
+ * Unconditionally switch the ports back to xHCI after a system resume.
+ * We can't tell whether the EHCI or xHCI controller will be resumed
+ * first, so we have to do the port switchover in both drivers. Writing
+ * a '1' to the port switchover registers should have no effect if the
+ * port was already switched over.
+ */
+ if (usb_is_intel_switchable_ehci(pdev))
+ ehci_enable_xhci_companion();
+
// maybe restore FLADJ
if (time_before(jiffies, ehci->next_statechange))
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index f16c59d5f48..fd930618c28 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -69,6 +69,9 @@
#define NB_PIF0_PWRDOWN_0 0x01100012
#define NB_PIF0_PWRDOWN_1 0x01100013
+#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB3_PSSEN 0xD8
+
static struct amd_chipset_info {
struct pci_dev *nb_dev;
struct pci_dev *smbus_dev;
@@ -673,6 +676,64 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done,
return -ETIMEDOUT;
}
+bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
+{
+ return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
+ pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI;
+}
+EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci);
+
+/*
+ * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that
+ * share some number of ports. These ports can be switched between either
+ * controller. Not all of the ports under the EHCI host controller may be
+ * switchable.
+ *
+ * The ports should be switched over to xHCI before PCI probes for any device
+ * start. This avoids active devices under EHCI being disconnected during the
+ * port switchover, which could cause loss of data on USB storage devices, or
+ * failed boot when the root file system is on a USB mass storage device and is
+ * enumerated under EHCI first.
+ *
+ * We write into the xHC's PCI configuration space in some Intel-specific
+ * registers to switch the ports over. The USB 3.0 terminations and the USB
+ * 2.0 data wires are switched separately. We want to enable the SuperSpeed
+ * terminations before switching the USB 2.0 wires over, so that USB 3.0
+ * devices connect at SuperSpeed, rather than at USB 2.0 speeds.
+ */
+void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
+{
+ u32 ports_available;
+
+ ports_available = 0xffffffff;
+ /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
+ * Register, to turn on SuperSpeed terminations for all
+ * available ports.
+ */
+ pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
+ cpu_to_le32(ports_available));
+
+ pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
+ &ports_available);
+ dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
+ "under xHCI: 0x%x\n", ports_available);
+
+ ports_available = 0xffffffff;
+ /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
+ * switch the USB 2.0 power and data lines over to the xHCI
+ * host.
+ */
+ pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+ cpu_to_le32(ports_available));
+
+ pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+ &ports_available);
+ dev_dbg(&xhci_pdev->dev, "USB 2.0 ports that are now switched over "
+ "to xHCI: 0x%x\n", ports_available);
+}
+EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
+
/**
* PCI Quirks for xHCI.
*
@@ -732,6 +793,8 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
writel(XHCI_LEGACY_DISABLE_SMI,
base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ if (usb_is_intel_switchable_xhci(pdev))
+ usb_enable_xhci_ports(pdev);
hc_init:
op_reg_base = base + XHCI_HC_LENGTH(readl(base));
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index 6ae9f78e993..b1002a8ef96 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -8,6 +8,8 @@ int usb_amd_find_chipset_info(void);
void usb_amd_dev_put(void);
void usb_amd_quirk_pll_disable(void);
void usb_amd_quirk_pll_enable(void);
+bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
+void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
#else
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index cbc4d491e62..c408e9f6a70 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -118,6 +118,12 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
/* AMD PLL quirk */
if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
xhci->quirks |= XHCI_AMD_PLL_FIX;
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
+ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+ xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
+ xhci->limit_active_eps = 64;
+ }
/* Make sure the HC is halted. */
retval = xhci_halt(xhci);
@@ -242,8 +248,28 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval = 0;
+ /* The BIOS on systems with the Intel Panther Point chipset may or may
+ * not support xHCI natively. That means that during system resume, it
+ * may switch the ports back to EHCI so that users can use their
+ * keyboard to select a kernel from GRUB after resume from hibernate.
+ *
+ * The BIOS is supposed to remember whether the OS had xHCI ports
+ * enabled before resume, and switch the ports back to xHCI when the
+ * BIOS/OS semaphore is written, but we all know we can't trust BIOS
+ * writers.
+ *
+ * Unconditionally switch the ports back to xHCI after a system resume.
+ * We can't tell whether the EHCI or xHCI controller will be resumed
+ * first, so we have to do the port switchover in both drivers. Writing
+ * a '1' to the port switchover registers should have no effect if the
+ * port was already switched over.
+ */
+ if (usb_is_intel_switchable_xhci(pdev))
+ usb_enable_xhci_ports(pdev);
+
retval = xhci_resume(xhci, hibernated);
return retval;
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 237a765f8d1..cc1485bfed3 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -167,12 +167,6 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
next = ring->dequeue;
}
addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
- if (ring == xhci->event_ring)
- xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr);
- else if (ring == xhci->cmd_ring)
- xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr);
- else
- xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr);
}
/*
@@ -248,12 +242,6 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
next = ring->enqueue;
}
addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
- if (ring == xhci->event_ring)
- xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr);
- else if (ring == xhci->cmd_ring)
- xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr);
- else
- xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr);
}
/*
@@ -636,13 +624,11 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
}
}
usb_hcd_unlink_urb_from_ep(hcd, urb);
- xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb);
spin_unlock(&xhci->lock);
usb_hcd_giveback_urb(hcd, urb, status);
xhci_urb_free_priv(xhci, urb_priv);
spin_lock(&xhci->lock);
- xhci_dbg(xhci, "%s URB given back\n", adjective);
}
}
@@ -692,6 +678,8 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
if (list_empty(&ep->cancelled_td_list)) {
xhci_stop_watchdog_timer_in_irq(xhci, ep);
+ ep->stopped_td = NULL;
+ ep->stopped_trb = NULL;
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
return;
}
@@ -1093,8 +1081,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
complete(&xhci->addr_dev);
break;
case TRB_TYPE(TRB_DISABLE_SLOT):
- if (xhci->devs[slot_id])
+ if (xhci->devs[slot_id]) {
+ if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
+ /* Delete default control endpoint resources */
+ xhci_free_device_endpoint_resources(xhci,
+ xhci->devs[slot_id], true);
xhci_free_virt_device(xhci, slot_id);
+ }
break;
case TRB_TYPE(TRB_CONFIG_EP):
virt_dev = xhci->devs[slot_id];
@@ -1630,7 +1623,6 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
"without IOC set??\n");
*status = -ESHUTDOWN;
} else {
- xhci_dbg(xhci, "Successful control transfer!\n");
*status = 0;
}
break;
@@ -1727,7 +1719,6 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
switch (trb_comp_code) {
case COMP_SUCCESS:
frame->status = 0;
- xhci_dbg(xhci, "Successful isoc transfer!\n");
break;
case COMP_SHORT_TX:
frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
@@ -1837,12 +1828,6 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
else
*status = 0;
} else {
- if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
- xhci_dbg(xhci, "Successful bulk "
- "transfer!\n");
- else
- xhci_dbg(xhci, "Successful interrupt "
- "transfer!\n");
*status = 0;
}
break;
@@ -1856,11 +1841,12 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
/* Others already handled above */
break;
}
- xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
- "%d bytes untransferred\n",
- td->urb->ep->desc.bEndpointAddress,
- td->urb->transfer_buffer_length,
- TRB_LEN(le32_to_cpu(event->transfer_len)));
+ if (trb_comp_code == COMP_SHORT_TX)
+ xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
+ "%d bytes untransferred\n",
+ td->urb->ep->desc.bEndpointAddress,
+ td->urb->transfer_buffer_length,
+ TRB_LEN(le32_to_cpu(event->transfer_len)));
/* Fast path - was this the last TRB in the TD for this URB? */
if (event_trb == td->last_trb) {
if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
@@ -1954,7 +1940,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
/* Endpoint ID is 1 based, our index is zero based */
ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
- xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
ep = &xdev->eps[ep_index];
ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
@@ -2081,6 +2066,16 @@ static int handle_tx_event(struct xhci_hcd *xhci,
if (!event_seg) {
if (!ep->skip ||
!usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
+ /* Some host controllers give a spurious
+ * successful event after a short transfer.
+ * Ignore it.
+ */
+ if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
+ ep_ring->last_td_was_short) {
+ ep_ring->last_td_was_short = false;
+ ret = 0;
+ goto cleanup;
+ }
/* HC is busted, give up! */
xhci_err(xhci,
"ERROR Transfer event TRB DMA ptr not "
@@ -2091,6 +2086,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
ret = skip_isoc_td(xhci, td, event, ep, &status);
goto cleanup;
}
+ if (trb_comp_code == COMP_SHORT_TX)
+ ep_ring->last_td_was_short = true;
+ else
+ ep_ring->last_td_was_short = false;
if (ep->skip) {
xhci_dbg(xhci, "Found td. Clear skip flag.\n");
@@ -2149,9 +2148,15 @@ cleanup:
xhci_urb_free_priv(xhci, urb_priv);
usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
- xhci_dbg(xhci, "Giveback URB %p, len = %d, "
- "status = %d\n",
- urb, urb->actual_length, status);
+ if ((urb->actual_length != urb->transfer_buffer_length &&
+ (urb->transfer_flags &
+ URB_SHORT_NOT_OK)) ||
+ status != 0)
+ xhci_dbg(xhci, "Giveback URB %p, len = %d, "
+ "expected = %x, status = %d\n",
+ urb, urb->actual_length,
+ urb->transfer_buffer_length,
+ status);
spin_unlock(&xhci->lock);
usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status);
spin_lock(&xhci->lock);
@@ -2180,7 +2185,6 @@ static int xhci_handle_event(struct xhci_hcd *xhci)
int update_ptrs = 1;
int ret;
- xhci_dbg(xhci, "In %s\n", __func__);
if (!xhci->event_ring || !xhci->event_ring->dequeue) {
xhci->error_bitmask |= 1 << 1;
return 0;
@@ -2193,7 +2197,6 @@ static int xhci_handle_event(struct xhci_hcd *xhci)
xhci->error_bitmask |= 1 << 2;
return 0;
}
- xhci_dbg(xhci, "%s - OS owns TRB\n", __func__);
/*
* Barrier between reading the TRB_CYCLE (valid) flag above and any
@@ -2203,20 +2206,14 @@ static int xhci_handle_event(struct xhci_hcd *xhci)
/* FIXME: Handle more event types. */
switch ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK)) {
case TRB_TYPE(TRB_COMPLETION):
- xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__);
handle_cmd_completion(xhci, &event->event_cmd);
- xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__);
break;
case TRB_TYPE(TRB_PORT_STATUS):
- xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__);
handle_port_status(xhci, event);
- xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__);
update_ptrs = 0;
break;
case TRB_TYPE(TRB_TRANSFER):
- xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__);
ret = handle_tx_event(xhci, &event->trans_event);
- xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__);
if (ret < 0)
xhci->error_bitmask |= 1 << 9;
else
@@ -2273,16 +2270,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
spin_unlock(&xhci->lock);
return IRQ_NONE;
}
- xhci_dbg(xhci, "op reg status = %08x\n", status);
- xhci_dbg(xhci, "Event ring dequeue ptr:\n");
- xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
- (unsigned long long)
- xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
- lower_32_bits(le64_to_cpu(trb->link.segment_ptr)),
- upper_32_bits(le64_to_cpu(trb->link.segment_ptr)),
- (unsigned int) le32_to_cpu(trb->link.intr_target),
- (unsigned int) le32_to_cpu(trb->link.control));
-
if (status & STS_FATAL) {
xhci_warn(xhci, "WARNING: Host System Error\n");
xhci_halt(xhci);
@@ -2397,7 +2384,6 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
{
/* Make sure the endpoint has been added to xHC schedule */
- xhci_dbg(xhci, "Endpoint state = 0x%x\n", ep_state);
switch (ep_state) {
case EP_STATE_DISABLED:
/*
@@ -2434,7 +2420,6 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
struct xhci_ring *ring = ep_ring;
union xhci_trb *next;
- xhci_dbg(xhci, "prepare_ring: pointing to link trb\n");
next = ring->enqueue;
while (last_trb(xhci, ring, ring->enq_seg, next)) {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8f2a56ece44..d9660eb97eb 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1314,8 +1314,10 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
if (ret <= 0)
return ret;
xhci = hcd_to_xhci(hcd);
- xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ return -ENODEV;
+ xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
drop_flag = xhci_get_endpoint_flag(&ep->desc);
if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) {
xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
@@ -1401,6 +1403,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
return ret;
}
xhci = hcd_to_xhci(hcd);
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ return -ENODEV;
added_ctxs = xhci_get_endpoint_flag(&ep->desc);
last_ctx = xhci_last_valid_endpoint(added_ctxs);
@@ -1578,6 +1582,113 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
return ret;
}
+static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx)
+{
+ struct xhci_input_control_ctx *ctrl_ctx;
+ u32 valid_add_flags;
+ u32 valid_drop_flags;
+
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ /* Ignore the slot flag (bit 0), and the default control endpoint flag
+ * (bit 1). The default control endpoint is added during the Address
+ * Device command and is never removed until the slot is disabled.
+ */
+ valid_add_flags = ctrl_ctx->add_flags >> 2;
+ valid_drop_flags = ctrl_ctx->drop_flags >> 2;
+
+ /* Use hweight32 to count the number of ones in the add flags, or
+ * number of endpoints added. Don't count endpoints that are changed
+ * (both added and dropped).
+ */
+ return hweight32(valid_add_flags) -
+ hweight32(valid_add_flags & valid_drop_flags);
+}
+
+static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx)
+{
+ struct xhci_input_control_ctx *ctrl_ctx;
+ u32 valid_add_flags;
+ u32 valid_drop_flags;
+
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ valid_add_flags = ctrl_ctx->add_flags >> 2;
+ valid_drop_flags = ctrl_ctx->drop_flags >> 2;
+
+ return hweight32(valid_drop_flags) -
+ hweight32(valid_add_flags & valid_drop_flags);
+}
+
+/*
+ * We need to reserve the new number of endpoints before the configure endpoint
+ * command completes. We can't subtract the dropped endpoints from the number
+ * of active endpoints until the command completes because we can oversubscribe
+ * the host in this case:
+ *
+ * - the first configure endpoint command drops more endpoints than it adds
+ * - a second configure endpoint command that adds more endpoints is queued
+ * - the first configure endpoint command fails, so the config is unchanged
+ * - the second command may succeed, even though there isn't enough resources
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_resources(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx)
+{
+ u32 added_eps;
+
+ added_eps = xhci_count_num_new_endpoints(xhci, in_ctx);
+ if (xhci->num_active_eps + added_eps > xhci->limit_active_eps) {
+ xhci_dbg(xhci, "Not enough ep ctxs: "
+ "%u active, need to add %u, limit is %u.\n",
+ xhci->num_active_eps, added_eps,
+ xhci->limit_active_eps);
+ return -ENOMEM;
+ }
+ xhci->num_active_eps += added_eps;
+ xhci_dbg(xhci, "Adding %u ep ctxs, %u now active.\n", added_eps,
+ xhci->num_active_eps);
+ return 0;
+}
+
+/*
+ * The configure endpoint was failed by the xHC for some other reason, so we
+ * need to revert the resources that failed configuration would have used.
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_free_host_resources(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx)
+{
+ u32 num_failed_eps;
+
+ num_failed_eps = xhci_count_num_new_endpoints(xhci, in_ctx);
+ xhci->num_active_eps -= num_failed_eps;
+ xhci_dbg(xhci, "Removing %u failed ep ctxs, %u now active.\n",
+ num_failed_eps,
+ xhci->num_active_eps);
+}
+
+/*
+ * Now that the command has completed, clean up the active endpoint count by
+ * subtracting out the endpoints that were dropped (but not changed).
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_finish_resource_reservation(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx)
+{
+ u32 num_dropped_eps;
+
+ num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, in_ctx);
+ xhci->num_active_eps -= num_dropped_eps;
+ if (num_dropped_eps)
+ xhci_dbg(xhci, "Removing %u dropped ep ctxs, %u now active.\n",
+ num_dropped_eps,
+ xhci->num_active_eps);
+}
+
/* Issue a configure endpoint command or evaluate context command
* and wait for it to finish.
*/
@@ -1598,6 +1709,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
virt_dev = xhci->devs[udev->slot_id];
if (command) {
in_ctx = command->in_ctx;
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
+ xhci_reserve_host_resources(xhci, in_ctx)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "Not enough host resources, "
+ "active endpoint contexts = %u\n",
+ xhci->num_active_eps);
+ return -ENOMEM;
+ }
+
cmd_completion = command->completion;
cmd_status = &command->status;
command->command_trb = xhci->cmd_ring->enqueue;
@@ -1613,6 +1733,14 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
} else {
in_ctx = virt_dev->in_ctx;
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
+ xhci_reserve_host_resources(xhci, in_ctx)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "Not enough host resources, "
+ "active endpoint contexts = %u\n",
+ xhci->num_active_eps);
+ return -ENOMEM;
+ }
cmd_completion = &virt_dev->cmd_completion;
cmd_status = &virt_dev->cmd_status;
}
@@ -1627,6 +1755,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
if (ret < 0) {
if (command)
list_del(&command->cmd_list);
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+ xhci_free_host_resources(xhci, in_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
return -ENOMEM;
@@ -1649,8 +1779,22 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
}
if (!ctx_change)
- return xhci_configure_endpoint_result(xhci, udev, cmd_status);
- return xhci_evaluate_context_result(xhci, udev, cmd_status);
+ ret = xhci_configure_endpoint_result(xhci, udev, cmd_status);
+ else
+ ret = xhci_evaluate_context_result(xhci, udev, cmd_status);
+
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* If the command failed, remove the reserved resources.
+ * Otherwise, clean up the estimate to include dropped eps.
+ */
+ if (ret)
+ xhci_free_host_resources(xhci, in_ctx);
+ else
+ xhci_finish_resource_reservation(xhci, in_ctx);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ }
+ return ret;
}
/* Called after one or more calls to xhci_add_endpoint() or
@@ -1676,6 +1820,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
if (ret <= 0)
return ret;
xhci = hcd_to_xhci(hcd);
+ if (xhci->xhc_state & XHCI_STATE_DYING)
+ return -ENODEV;
xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
virt_dev = xhci->devs[udev->slot_id];
@@ -2266,6 +2412,34 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
}
/*
+ * Deletes endpoint resources for endpoints that were active before a Reset
+ * Device command, or a Disable Slot command. The Reset Device command leaves
+ * the control endpoint intact, whereas the Disable Slot command deletes it.
+ *
+ * Must be called with xhci->lock held.
+ */
+void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev, bool drop_control_ep)
+{
+ int i;
+ unsigned int num_dropped_eps = 0;
+ unsigned int drop_flags = 0;
+
+ for (i = (drop_control_ep ? 0 : 1); i < 31; i++) {
+ if (virt_dev->eps[i].ring) {
+ drop_flags |= 1 << i;
+ num_dropped_eps++;
+ }
+ }
+ xhci->num_active_eps -= num_dropped_eps;
+ if (num_dropped_eps)
+ xhci_dbg(xhci, "Dropped %u ep ctxs, flags = 0x%x, "
+ "%u now active.\n",
+ num_dropped_eps, drop_flags,
+ xhci->num_active_eps);
+}
+
+/*
* This submits a Reset Device Command, which will set the device state to 0,
* set the device address to 0, and disable all the endpoints except the default
* control endpoint. The USB core should come back and call
@@ -2406,6 +2580,14 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
goto command_cleanup;
}
+ /* Free up host controller endpoint resources */
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* Don't delete the default control endpoint resources */
+ xhci_free_device_endpoint_resources(xhci, virt_dev, false);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ }
+
/* Everything but endpoint 0 is disabled, so free or cache the rings. */
last_freed_endpoint = 1;
for (i = 1; i < 31; ++i) {
@@ -2479,6 +2661,27 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
}
/*
+ * Checks if we have enough host controller resources for the default control
+ * endpoint.
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_control_ep_resources(struct xhci_hcd *xhci)
+{
+ if (xhci->num_active_eps + 1 > xhci->limit_active_eps) {
+ xhci_dbg(xhci, "Not enough ep ctxs: "
+ "%u active, need to add 1, limit is %u.\n",
+ xhci->num_active_eps, xhci->limit_active_eps);
+ return -ENOMEM;
+ }
+ xhci->num_active_eps += 1;
+ xhci_dbg(xhci, "Adding 1 ep ctx, %u now active.\n",
+ xhci->num_active_eps);
+ return 0;
+}
+
+
+/*
* Returns 0 if the xHC ran out of device slots, the Enable Slot command
* timed out, or allocating memory failed. Returns 1 on success.
*/
@@ -2513,24 +2716,39 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
xhci_err(xhci, "Error while assigning device slot ID\n");
return 0;
}
- /* xhci_alloc_virt_device() does not touch rings; no need to lock.
- * Use GFP_NOIO, since this function can be called from
+
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_reserve_host_control_ep_resources(xhci);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "Not enough host resources, "
+ "active endpoint contexts = %u\n",
+ xhci->num_active_eps);
+ goto disable_slot;
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ }
+ /* Use GFP_NOIO, since this function can be called from
* xhci_discover_or_reset_device(), which may be called as part of
* mass storage driver error handling.
*/
if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
- /* Disable slot, if we can do it without mem alloc */
xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
- spin_lock_irqsave(&xhci->lock, flags);
- if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
- xhci_ring_cmd_db(xhci);
- spin_unlock_irqrestore(&xhci->lock, flags);
- return 0;
+ goto disable_slot;
}
udev->slot_id = xhci->slot_id;
/* Is this a LS or FS device under a HS hub? */
/* Hub or peripherial? */
return 1;
+
+disable_slot:
+ /* Disable slot, if we can do it without mem alloc */
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return 0;
}
/*
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index e12db7cfb9b..ac0196e7fcf 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1123,6 +1123,7 @@ struct xhci_ring {
*/
u32 cycle_state;
unsigned int stream_id;
+ bool last_td_was_short;
};
struct xhci_erst_entry {
@@ -1290,6 +1291,19 @@ struct xhci_hcd {
#define XHCI_RESET_EP_QUIRK (1 << 1)
#define XHCI_NEC_HOST (1 << 2)
#define XHCI_AMD_PLL_FIX (1 << 3)
+#define XHCI_SPURIOUS_SUCCESS (1 << 4)
+/*
+ * Certain Intel host controllers have a limit to the number of endpoint
+ * contexts they can handle. Ideally, they would signal that they can't handle
+ * anymore endpoint contexts by returning a Resource Error for the Configure
+ * Endpoint command, but they don't. Instead they expect software to keep track
+ * of the number of active endpoints for them, across configure endpoint
+ * commands, reset device commands, disable slot commands, and address device
+ * commands.
+ */
+#define XHCI_EP_LIMIT_QUIRK (1 << 5)
+ unsigned int num_active_eps;
+ unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
struct xhci_bus_state bus_state[2];
/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
@@ -1338,9 +1352,6 @@ static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
static inline void xhci_writel(struct xhci_hcd *xhci,
const unsigned int val, __le32 __iomem *regs)
{
- xhci_dbg(xhci,
- "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
- regs, val);
writel(val, regs);
}
@@ -1368,9 +1379,6 @@ static inline void xhci_write_64(struct xhci_hcd *xhci,
u32 val_lo = lower_32_bits(val);
u32 val_hi = upper_32_bits(val);
- xhci_dbg(xhci,
- "`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n",
- regs, (long unsigned int) val);
writel(val_lo, ptr);
writel(val_hi, ptr + 1);
}
@@ -1439,6 +1447,8 @@ void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
struct xhci_ep_ctx *ep_ctx,
struct xhci_virt_ep *ep);
+void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev, bool drop_control_ep);
struct xhci_ring *xhci_dma_to_transfer_ring(
struct xhci_virt_ep *ep,
u64 address);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 24787b75128..a311008af5e 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2483,6 +2483,7 @@
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f
#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40
#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI 0x1e31
#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e40
#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f
#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310