aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/wireless/Kconfig1
-rw-r--r--drivers/net/wireless/Makefile2
-rw-r--r--drivers/net/wireless/adm8211.c14
-rw-r--r--drivers/net/wireless/at76c50x-usb.c15
-rw-r--r--drivers/net/wireless/ath/ar9170/hw.h2
-rw-r--r--drivers/net/wireless/ath/ar9170/mac.c33
-rw-r--r--drivers/net/wireless/ath/ar9170/main.c48
-rw-r--r--drivers/net/wireless/ath/ar9170/usb.c6
-rw-r--r--drivers/net/wireless/ath/ath5k/ath5k.h37
-rw-r--r--drivers/net/wireless/ath/ath5k/attach.c1
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c210
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.c73
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.h46
-rw-r--r--drivers/net/wireless/ath/ath5k/led.c6
-rw-r--r--drivers/net/wireless/ath/ath5k/pcu.c6
-rw-r--r--drivers/net/wireless/ath/ath5k/phy.c493
-rw-r--r--drivers/net/wireless/ath/ath5k/qcu.c7
-rw-r--r--drivers/net/wireless/ath/ath5k/reg.h9
-rw-r--r--drivers/net/wireless/ath/ath5k/reset.c70
-rw-r--r--drivers/net/wireless/ath/ath9k/ath9k.h39
-rw-r--r--drivers/net/wireless/ath/ath9k/beacon.c11
-rw-r--r--drivers/net/wireless/ath/ath9k/calib.c6
-rw-r--r--drivers/net/wireless/ath/ath9k/hw.c37
-rw-r--r--drivers/net/wireless/ath/ath9k/hw.h3
-rw-r--r--drivers/net/wireless/ath/ath9k/main.c206
-rw-r--r--drivers/net/wireless/ath/ath9k/rc.c70
-rw-r--r--drivers/net/wireless/ath/ath9k/xmit.c10
-rw-r--r--drivers/net/wireless/atmel_cs.c2
-rw-r--r--drivers/net/wireless/b43/main.c76
-rw-r--r--drivers/net/wireless/b43legacy/main.c73
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c8
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2200.c47
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-3945-rs.c7
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-rs.c31
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c24
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.c168
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.h3
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-sta.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c69
-rw-r--r--drivers/net/wireless/libertas_tf/main.c56
-rw-r--r--drivers/net/wireless/mac80211_hwsim.c45
-rw-r--r--drivers/net/wireless/mwl8k.c18
-rw-r--r--drivers/net/wireless/p54/p54.h4
-rw-r--r--drivers/net/wireless/p54/p54common.c86
-rw-r--r--drivers/net/wireless/p54/p54usb.c314
-rw-r--r--drivers/net/wireless/p54/p54usb.h16
-rw-r--r--drivers/net/wireless/rt2x00/Kconfig17
-rw-r--r--drivers/net/wireless/rt2x00/Makefile2
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.c1
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.c1
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c3
-rw-r--r--drivers/net/wireless/rt2x00/rt2800usb.c3071
-rw-r--r--drivers/net/wireless/rt2x00/rt2800usb.h1945
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00.h32
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00config.c5
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00crypto.c87
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c125
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00ht.c69
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00lib.h65
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mac.c88
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.c48
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.h53
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c1
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c4
-rw-r--r--drivers/net/wireless/rtl818x/rtl8180_dev.c33
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187_dev.c48
-rw-r--r--drivers/net/wireless/wl12xx/Kconfig11
-rw-r--r--drivers/net/wireless/wl12xx/Makefile4
-rw-r--r--drivers/net/wireless/wl12xx/acx.c689
-rw-r--r--drivers/net/wireless/wl12xx/acx.h1245
-rw-r--r--drivers/net/wireless/wl12xx/boot.c295
-rw-r--r--drivers/net/wireless/wl12xx/boot.h40
-rw-r--r--drivers/net/wireless/wl12xx/cmd.c353
-rw-r--r--drivers/net/wireless/wl12xx/cmd.h265
-rw-r--r--drivers/net/wireless/wl12xx/debugfs.c508
-rw-r--r--drivers/net/wireless/wl12xx/debugfs.h33
-rw-r--r--drivers/net/wireless/wl12xx/event.c127
-rw-r--r--drivers/net/wireless/wl12xx/event.h121
-rw-r--r--drivers/net/wireless/wl12xx/init.c200
-rw-r--r--drivers/net/wireless/wl12xx/init.h40
-rw-r--r--drivers/net/wireless/wl12xx/main.c1358
-rw-r--r--drivers/net/wireless/wl12xx/ps.c151
-rw-r--r--drivers/net/wireless/wl12xx/ps.h36
-rw-r--r--drivers/net/wireless/wl12xx/reg.h745
-rw-r--r--drivers/net/wireless/wl12xx/rx.c208
-rw-r--r--drivers/net/wireless/wl12xx/rx.h122
-rw-r--r--drivers/net/wireless/wl12xx/spi.c358
-rw-r--r--drivers/net/wireless/wl12xx/spi.h109
-rw-r--r--drivers/net/wireless/wl12xx/tx.c557
-rw-r--r--drivers/net/wireless/wl12xx/tx.h215
-rw-r--r--drivers/net/wireless/wl12xx/wl1251.c709
-rw-r--r--drivers/net/wireless/wl12xx/wl1251.h165
-rw-r--r--drivers/net/wireless/wl12xx/wl12xx.h409
-rw-r--r--drivers/net/wireless/wl12xx/wl12xx_80211.h156
-rw-r--r--drivers/net/wireless/zd1211rw/zd_mac.c80
-rw-r--r--include/linux/ieee80211.h2
-rw-r--r--include/linux/spi/wl12xx.h31
-rw-r--r--include/net/mac80211.h77
-rw-r--r--net/mac80211/agg-rx.c19
-rw-r--r--net/mac80211/agg-tx.c13
-rw-r--r--net/mac80211/cfg.c49
-rw-r--r--net/mac80211/debugfs.c20
-rw-r--r--net/mac80211/driver-ops.h184
-rw-r--r--net/mac80211/ibss.c102
-rw-r--r--net/mac80211/ieee80211_i.h14
-rw-r--r--net/mac80211/iface.c100
-rw-r--r--net/mac80211/key.c8
-rw-r--r--net/mac80211/main.c165
-rw-r--r--net/mac80211/mesh.c6
-rw-r--r--net/mac80211/mlme.c74
-rw-r--r--net/mac80211/pm.c9
-rw-r--r--net/mac80211/rc80211_minstrel.c8
-rw-r--r--net/mac80211/rc80211_pid_algo.c8
-rw-r--r--net/mac80211/rx.c138
-rw-r--r--net/mac80211/scan.c414
-rw-r--r--net/mac80211/sta_info.c26
-rw-r--r--net/mac80211/sta_info.h2
-rw-r--r--net/mac80211/tkip.c6
-rw-r--r--net/mac80211/tx.c9
-rw-r--r--net/mac80211/util.c31
-rw-r--r--net/mac80211/wext.c2
-rw-r--r--net/rfkill/rfkill.c5
-rw-r--r--net/wireless/nl80211.c6
-rw-r--r--net/wireless/reg.c8
-rw-r--r--net/wireless/scan.c10
125 files changed, 17180 insertions, 1883 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 2d8434f409b..91be3e7bf13 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -500,5 +500,6 @@ source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
source "drivers/net/wireless/rt2x00/Kconfig"
source "drivers/net/wireless/orinoco/Kconfig"
+source "drivers/net/wireless/wl12xx/Kconfig"
endmenu
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 0625e91b599..f2b1861e6bc 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -58,3 +58,5 @@ obj-$(CONFIG_P54_COMMON) += p54/
obj-$(CONFIG_ATH_COMMON) += ath/
obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o
+
+obj-$(CONFIG_WL12XX) += wl12xx/
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index f7182179501..2b9e379994a 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1311,18 +1311,20 @@ static int adm8211_config(struct ieee80211_hw *dev, u32 changed)
return 0;
}
-static int adm8211_config_interface(struct ieee80211_hw *dev,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
+static void adm8211_bss_info_changed(struct ieee80211_hw *dev,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *conf,
+ u32 changes)
{
struct adm8211_priv *priv = dev->priv;
+ if (!(changes & BSS_CHANGED_BSSID))
+ return;
+
if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) {
adm8211_set_bssid(dev, conf->bssid);
memcpy(priv->bssid, conf->bssid, ETH_ALEN);
}
-
- return 0;
}
static void adm8211_configure_filter(struct ieee80211_hw *dev,
@@ -1753,7 +1755,7 @@ static const struct ieee80211_ops adm8211_ops = {
.add_interface = adm8211_add_interface,
.remove_interface = adm8211_remove_interface,
.config = adm8211_config,
- .config_interface = adm8211_config_interface,
+ .bss_info_changed = adm8211_bss_info_changed,
.configure_filter = adm8211_configure_filter,
.get_stats = adm8211_get_stats,
.get_tx_stats = adm8211_get_tx_stats,
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 55f947ac56d..cea7f1466c5 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -1965,13 +1965,18 @@ static int at76_config(struct ieee80211_hw *hw, u32 changed)
return 0;
}
-static int at76_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
+static void at76_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *conf,
+ u32 changed)
{
struct at76_priv *priv = hw->priv;
at76_dbg(DBG_MAC80211, "%s():", __func__);
+
+ if (!(changed & BSS_CHANGED_BSSID))
+ return;
+
at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:");
mutex_lock(&priv->mtx);
@@ -1983,8 +1988,6 @@ static int at76_config_interface(struct ieee80211_hw *hw,
at76_join(priv);
mutex_unlock(&priv->mtx);
-
- return 0;
}
/* must be atomic */
@@ -2076,7 +2079,7 @@ static const struct ieee80211_ops at76_ops = {
.add_interface = at76_add_interface,
.remove_interface = at76_remove_interface,
.config = at76_config,
- .config_interface = at76_config_interface,
+ .bss_info_changed = at76_bss_info_changed,
.configure_filter = at76_configure_filter,
.start = at76_mac80211_start,
.stop = at76_mac80211_stop,
diff --git a/drivers/net/wireless/ath/ar9170/hw.h b/drivers/net/wireless/ath/ar9170/hw.h
index 95bf812d6fc..3293e0fb24f 100644
--- a/drivers/net/wireless/ath/ar9170/hw.h
+++ b/drivers/net/wireless/ath/ar9170/hw.h
@@ -207,6 +207,8 @@ enum ar9170_cmd {
#define AR9170_MAC_REG_AC1_AC0_TXOP (AR9170_MAC_REG_BASE + 0xB44)
#define AR9170_MAC_REG_AC3_AC2_TXOP (AR9170_MAC_REG_BASE + 0xB48)
+#define AR9170_MAC_REG_AMPDU_SET (AR9170_MAC_REG_BASE + 0xba0)
+
#define AR9170_MAC_REG_ACK_TABLE (AR9170_MAC_REG_BASE + 0xC00)
#define AR9170_MAC_REG_AMPDU_RX_THRESH (AR9170_MAC_REG_BASE + 0xC50)
diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
index c8fa3073169..43aeb69685d 100644
--- a/drivers/net/wireless/ath/ar9170/mac.c
+++ b/drivers/net/wireless/ath/ar9170/mac.c
@@ -72,6 +72,24 @@ int ar9170_set_qos(struct ar9170 *ar)
return ar9170_regwrite_result();
}
+static int ar9170_set_ampdu_density(struct ar9170 *ar, u8 mpdudensity)
+{
+ u32 val;
+
+ /* don't allow AMPDU density > 8us */
+ if (mpdudensity > 6)
+ return -EINVAL;
+
+ /* Watch out! Otus uses slightly different density values. */
+ val = 0x140a00 | (mpdudensity ? (mpdudensity + 1) : 0);
+
+ ar9170_regwrite_begin(ar);
+ ar9170_regwrite(AR9170_MAC_REG_AMPDU_SET, val);
+ ar9170_regwrite_finish();
+
+ return ar9170_regwrite_result();
+}
+
int ar9170_init_mac(struct ar9170 *ar)
{
ar9170_regwrite_begin(ar);
@@ -265,9 +283,9 @@ int ar9170_set_operating_mode(struct ar9170 *ar)
case NL80211_IFTYPE_ADHOC:
pm_mode |= AR9170_MAC_REG_POWERMGT_IBSS;
break;
-/* case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_AP:
pm_mode |= AR9170_MAC_REG_POWERMGT_AP;
- break;*/
+ break;
case NL80211_IFTYPE_WDS:
pm_mode |= AR9170_MAC_REG_POWERMGT_AP_WDS;
break;
@@ -296,6 +314,11 @@ int ar9170_set_operating_mode(struct ar9170 *ar)
if (err)
return err;
+ /* set AMPDU density to 8us. */
+ err = ar9170_set_ampdu_density(ar, 6);
+ if (err)
+ return err;
+
ar9170_regwrite_begin(ar);
ar9170_regwrite(AR9170_MAC_REG_POWERMANAGEMENT, pm_mode);
@@ -316,9 +339,9 @@ int ar9170_set_beacon_timers(struct ar9170 *ar)
u32 v = 0;
u32 pretbtt = 0;
- v |= ar->hw->conf.beacon_int;
-
if (ar->vif) {
+ v |= ar->vif->bss_conf.beacon_int;
+
switch (ar->vif->type) {
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_ADHOC:
@@ -326,7 +349,7 @@ int ar9170_set_beacon_timers(struct ar9170 *ar)
break;
case NL80211_IFTYPE_AP:
v |= BIT(24);
- pretbtt = (ar->hw->conf.beacon_int - 6) << 16;
+ pretbtt = (ar->vif->bss_conf.beacon_int - 6) << 16;
break;
default:
break;
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 1b60906b80c..4ef1d2fc859 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -151,8 +151,8 @@ static struct ieee80211_channel ar9170_5ghz_chantable[] = {
IEEE80211_HT_CAP_SGI_40 | \
IEEE80211_HT_CAP_DSSSCCK40 | \
IEEE80211_HT_CAP_SM_PS, \
- .ampdu_factor = 3, /* ?? */ \
- .ampdu_density = 7, /* ?? */ \
+ .ampdu_factor = 3, \
+ .ampdu_density = 6, \
.mcs = { \
.rx_mask = { 0xFF, 0xFF, 0, 0, 0, 0, 0, 0, 0, 0, }, \
}, \
@@ -1337,7 +1337,7 @@ static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed)
goto out;
}
- if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) {
+ if (changed & BSS_CHANGED_BEACON_INT) {
err = ar9170_set_beacon_timers(ar);
if (err)
goto out;
@@ -1360,33 +1360,6 @@ out:
return err;
}
-static int ar9170_op_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct ar9170 *ar = hw->priv;
- int err = 0;
-
- mutex_lock(&ar->mutex);
-
- if (conf->changed & IEEE80211_IFCC_BSSID) {
- memcpy(ar->bssid, conf->bssid, ETH_ALEN);
- err = ar9170_set_operating_mode(ar);
- }
-
- if (conf->changed & IEEE80211_IFCC_BEACON) {
- err = ar9170_update_beacon(ar);
-
- if (err)
- goto out;
- err = ar9170_set_beacon_timers(ar);
- }
-
-out:
- mutex_unlock(&ar->mutex);
- return err;
-}
-
static void ar9170_set_filters(struct work_struct *work)
{
struct ar9170 *ar = container_of(work, struct ar9170,
@@ -1488,6 +1461,17 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw,
mutex_lock(&ar->mutex);
+ if (changed & BSS_CHANGED_BSSID) {
+ memcpy(ar->bssid, bss_conf->bssid, ETH_ALEN);
+ err = ar9170_set_operating_mode(ar);
+ }
+
+ if (changed & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED)) {
+ err = ar9170_update_beacon(ar);
+ if (!err)
+ ar9170_set_beacon_timers(ar);
+ }
+
ar9170_regwrite_begin(ar);
if (changed & BSS_CHANGED_ASSOC) {
@@ -1499,6 +1483,9 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw,
#endif /* CONFIG_AR9170_LEDS */
}
+ if (changed & BSS_CHANGED_BEACON_INT)
+ err = ar9170_set_beacon_timers(ar);
+
if (changed & BSS_CHANGED_HT) {
/* TODO */
err = 0;
@@ -1793,7 +1780,6 @@ static const struct ieee80211_ops ar9170_ops = {
.add_interface = ar9170_op_add_interface,
.remove_interface = ar9170_op_remove_interface,
.config = ar9170_op_config,
- .config_interface = ar9170_op_config_interface,
.configure_filter = ar9170_op_configure_filter,
.conf_tx = ar9170_conf_tx,
.bss_info_changed = ar9170_op_bss_info_changed,
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index fddda477095..d7c13c0177c 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -350,7 +350,7 @@ static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd,
goto err_unbuf;
}
- if (outlen >= 0 && aru->readlen != outlen) {
+ if (aru->readlen != outlen) {
err = -EMSGSIZE;
goto err_unbuf;
}
@@ -689,6 +689,9 @@ static int ar9170_usb_probe(struct usb_interface *intf,
aru->common.exec_cmd = ar9170_usb_exec_cmd;
aru->common.callback_cmd = ar9170_usb_callback_cmd;
+#ifdef CONFIG_PM
+ udev->reset_resume = 1;
+#endif
err = ar9170_usb_reset(aru);
if (err)
goto err_freehw;
@@ -805,6 +808,7 @@ static struct usb_driver ar9170_driver = {
#ifdef CONFIG_PM
.suspend = ar9170_suspend,
.resume = ar9170_resume,
+ .reset_resume = ar9170_resume,
#endif /* CONFIG_PM */
};
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 60c6d2edc4b..81371821033 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -209,7 +209,6 @@
#define AR5K_TUNE_MAX_TXPOWER 63
#define AR5K_TUNE_DEFAULT_TXPOWER 25
#define AR5K_TUNE_TPC_TXPOWER false
-#define AR5K_TUNE_ANT_DIVERSITY true
#define AR5K_TUNE_HWTXTRIES 4
#define AR5K_INIT_CARR_SENSE_EN 1
@@ -420,6 +419,17 @@ enum ath5k_driver_mode {
AR5K_MODE_MAX = 5
};
+enum ath5k_ant_mode {
+ AR5K_ANTMODE_DEFAULT = 0, /* default antenna setup */
+ AR5K_ANTMODE_FIXED_A = 1, /* only antenna A is present */
+ AR5K_ANTMODE_FIXED_B = 2, /* only antenna B is present */
+ AR5K_ANTMODE_SINGLE_AP = 3, /* sta locked on a single ap */
+ AR5K_ANTMODE_SECTOR_AP = 4, /* AP with tx antenna set on tx desc */
+ AR5K_ANTMODE_SECTOR_STA = 5, /* STA with tx antenna set on tx desc */
+ AR5K_ANTMODE_DEBUG = 6, /* Debug mode -A -> Rx, B-> Tx- */
+ AR5K_ANTMODE_MAX,
+};
+
/****************\
TX DEFINITIONS
@@ -1051,8 +1061,11 @@ struct ath5k_hw {
bool ah_software_retry;
u32 ah_limit_tx_retries;
- u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
- bool ah_ant_diversity;
+ /* Antenna Control */
+ u32 ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
+ u8 ah_ant_mode;
+ u8 ah_tx_ant;
+ u8 ah_def_ant;
u8 ah_sta_id[ETH_ALEN];
@@ -1100,11 +1113,12 @@ struct ath5k_hw {
/* Values in 0.25dB units */
s16 txp_min_pwr;
s16 txp_max_pwr;
+ /* Values in 0.5dB units */
s16 txp_offset;
s16 txp_ofdm;
- /* Values in dB units */
- s16 txp_cck_ofdm_pwr_delta;
s16 txp_cck_ofdm_gainf_delta;
+ /* Value in dB units */
+ s16 txp_cck_ofdm_pwr_delta;
} ah_txpower;
struct {
@@ -1264,14 +1278,21 @@ extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *chann
/* PHY calibration */
extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+/* Spur mitigation */
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel);
+void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel);
/* Misc PHY functions */
extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
-extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
-extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+/* Antenna control */
+extern void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode);
+extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant);
+extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
/* TX power setup */
extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower);
-extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower);
+extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
/*
* Functions used internaly
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index 70d376c63aa..c41ef58393e 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -133,7 +133,6 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
ah->ah_cw_min = AR5K_TUNE_CWMIN;
ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
ah->ah_software_retry = false;
- ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
/*
* Set the mac version based on the pci id
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index c8c658bfcf9..6789c5dfcc7 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -227,9 +227,6 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
static void ath5k_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
-static int ath5k_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf);
static void ath5k_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *new_flags,
@@ -259,7 +256,6 @@ static const struct ieee80211_ops ath5k_hw_ops = {
.add_interface = ath5k_add_interface,
.remove_interface = ath5k_remove_interface,
.config = ath5k_config,
- .config_interface = ath5k_config_interface,
.configure_filter = ath5k_configure_filter,
.set_key = ath5k_set_key,
.get_stats = ath5k_get_stats,
@@ -520,6 +516,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
IEEE80211_HW_NOISE_DBM;
hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_MESH_POINT);
@@ -1282,7 +1279,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
(sc->power_level * 2),
hw_rate,
- info->control.rates[0].count, keyidx, 0, flags,
+ info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
cts_rate, duration);
if (ret)
goto err_unmap;
@@ -1742,35 +1739,6 @@ ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
}
}
-static void ath5k_tasklet_beacon(unsigned long data)
-{
- struct ath5k_softc *sc = (struct ath5k_softc *) data;
-
- /*
- * Software beacon alert--time to send a beacon.
- *
- * In IBSS mode we use this interrupt just to
- * keep track of the next TBTT (target beacon
- * transmission time) in order to detect wether
- * automatic TSF updates happened.
- */
- if (sc->opmode == NL80211_IFTYPE_ADHOC) {
- /* XXX: only if VEOL suppported */
- u64 tsf = ath5k_hw_get_tsf64(sc->ah);
- sc->nexttbtt += sc->bintval;
- ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
- "SWBA nexttbtt: %x hw_tu: %x "
- "TSF: %llx\n",
- sc->nexttbtt,
- TSF_TO_TU(tsf),
- (unsigned long long) tsf);
- } else {
- spin_lock(&sc->block);
- ath5k_beacon_send(sc);
- spin_unlock(&sc->block);
- }
-}
-
static void
ath5k_tasklet_rx(unsigned long data)
{
@@ -2041,7 +2009,8 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ath5k_hw *ah = sc->ah;
struct ath5k_desc *ds;
- int ret, antenna = 0;
+ int ret = 0;
+ u8 antenna;
u32 flags;
bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
@@ -2055,23 +2024,35 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
}
ds = bf->desc;
+ antenna = ah->ah_tx_ant;
flags = AR5K_TXDESC_NOACK;
if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
ds->ds_link = bf->daddr; /* self-linked */
flags |= AR5K_TXDESC_VEOL;
- /*
- * Let hardware handle antenna switching if txantenna is not set
- */
- } else {
+ } else
ds->ds_link = 0;
- /*
- * Switch antenna every 4 beacons if txantenna is not set
- * XXX assumes two antennas
- */
- if (antenna == 0)
- antenna = sc->bsent & 4 ? 2 : 1;
- }
+
+ /*
+ * If we use multiple antennas on AP and use
+ * the Sectored AP scenario, switch antenna every
+ * 4 beacons to make sure everybody hears our AP.
+ * When a client tries to associate, hw will keep
+ * track of the tx antenna to be used for this client
+ * automaticaly, based on ACKed packets.
+ *
+ * Note: AP still listens and transmits RTS on the
+ * default antenna which is supposed to be an omni.
+ *
+ * Note2: On sectored scenarios it's possible to have
+ * multiple antennas (1omni -the default- and 14 sectors)
+ * so if we choose to actually support this mode we need
+ * to allow user to set how many antennas we have and tweak
+ * the code below to send beacons on all of them.
+ */
+ if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP)
+ antenna = sc->bsent & 4 ? 2 : 1;
+
/* FIXME: If we are in g mode and rate is a CCK rate
* subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
@@ -2124,7 +2105,7 @@ ath5k_beacon_send(struct ath5k_softc *sc)
sc->bmisscount++;
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
"missed %u consecutive beacons\n", sc->bmisscount);
- if (sc->bmisscount > 3) { /* NB: 3 is a guess */
+ if (sc->bmisscount > 10) { /* NB: 10 is a guess */
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
"stuck beacon time (%u missed)\n",
sc->bmisscount);
@@ -2145,10 +2126,12 @@ ath5k_beacon_send(struct ath5k_softc *sc)
* are still pending on the queue.
*/
if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
- ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
+ ATH5K_WARN(sc, "beacon queue %u didn't start/stop ?\n", sc->bhalq);
/* NB: hw still stops DMA, so proceed */
}
+ /* Note: Beacon buffer is updated on beacon_update when mac80211
+ * calls config_interface */
ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
ath5k_hw_start_tx_dma(ah, sc->bhalq);
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
@@ -2305,6 +2288,35 @@ ath5k_beacon_config(struct ath5k_softc *sc)
ath5k_hw_set_imr(ah, sc->imask);
}
+static void ath5k_tasklet_beacon(unsigned long data)
+{
+ struct ath5k_softc *sc = (struct ath5k_softc *) data;
+
+ /*
+ * Software beacon alert--time to send a beacon.
+ *
+ * In IBSS mode we use this interrupt just to
+ * keep track of the next TBTT (target beacon
+ * transmission time) in order to detect wether
+ * automatic TSF updates happened.
+ */
+ if (sc->opmode == NL80211_IFTYPE_ADHOC) {
+ /* XXX: only if VEOL suppported */
+ u64 tsf = ath5k_hw_get_tsf64(sc->ah);
+ sc->nexttbtt += sc->bintval;
+ ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
+ "SWBA nexttbtt: %x hw_tu: %x "
+ "TSF: %llx\n",
+ sc->nexttbtt,
+ TSF_TO_TU(tsf),
+ (unsigned long long) tsf);
+ } else {
+ spin_lock(&sc->block);
+ ath5k_beacon_send(sc);
+ spin_unlock(&sc->block);
+ }
+}
+
/********************\
* Interrupt handling *
@@ -2509,7 +2521,7 @@ ath5k_intr(int irq, void *dev_id)
ath5k_hw_update_mib_counters(ah, &sc->ll_stats);
}
}
- } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
+ } while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
if (unlikely(!counter))
ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
@@ -2751,56 +2763,47 @@ static int
ath5k_config(struct ieee80211_hw *hw, u32 changed)
{
struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
struct ieee80211_conf *conf = &hw->conf;
- int ret;
+ int ret = 0;
mutex_lock(&sc->lock);
sc->bintval = conf->beacon_int;
- sc->power_level = conf->power_level;
ret = ath5k_chan_set(sc, conf->channel);
+ if (ret < 0)
+ return ret;
- mutex_unlock(&sc->lock);
- return ret;
-}
-
-static int
-ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct ath5k_softc *sc = hw->priv;
- struct ath5k_hw *ah = sc->ah;
- int ret = 0;
+ if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
+ (sc->power_level != conf->power_level)) {
+ sc->power_level = conf->power_level;
- mutex_lock(&sc->lock);
- if (sc->vif != vif) {
- ret = -EIO;
- goto unlock;
- }
- if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
- /* Cache for later use during resets */
- memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN);
- /* XXX: assoc id is set to 0 for now, mac80211 doesn't have
- * a clean way of letting us retrieve this yet. */
- ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
- mmiowb();
- }
- if (conf->changed & IEEE80211_IFCC_BEACON &&
- (vif->type == NL80211_IFTYPE_ADHOC ||
- vif->type == NL80211_IFTYPE_MESH_POINT ||
- vif->type == NL80211_IFTYPE_AP)) {
- struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
- if (!beacon) {
- ret = -ENOMEM;
- goto unlock;
- }
- ath5k_beacon_update(sc, beacon);
+ /* Half dB steps */
+ ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
}
-unlock:
+ /* TODO:
+ * 1) Move this on config_interface and handle each case
+ * separately eg. when we have only one STA vif, use
+ * AR5K_ANTMODE_SINGLE_AP
+ *
+ * 2) Allow the user to change antenna mode eg. when only
+ * one antenna is present
+ *
+ * 3) Allow the user to set default/tx antenna when possible
+ *
+ * 4) Default mode should handle 90% of the cases, together
+ * with fixed a/b and single AP modes we should be able to
+ * handle 99%. Sectored modes are extreme cases and i still
+ * haven't found a usage for them. If we decide to support them,
+ * then we must allow the user to set how many tx antennas we
+ * have available
+ */
+ ath5k_hw_set_antenna_mode(ah, AR5K_ANTMODE_DEFAULT);
+
mutex_unlock(&sc->lock);
- return ret;
+ return 0;
}
#define SUPPORTED_FIF_FLAGS \
@@ -3083,11 +3086,40 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
u32 changes)
{
struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
+
+ mutex_lock(&sc->lock);
+ if (WARN_ON(sc->vif != vif))
+ goto unlock;
+
+ if (changes & BSS_CHANGED_BSSID) {
+ /* Cache for later use during resets */
+ memcpy(ah->ah_bssid, bss_conf->bssid, ETH_ALEN);
+ /* XXX: assoc id is set to 0 for now, mac80211 doesn't have
+ * a clean way of letting us retrieve this yet. */
+ ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+ mmiowb();
+ }
+
+ if (changes & BSS_CHANGED_BEACON_INT)
+ sc->bintval = bss_conf->beacon_int;
+
if (changes & BSS_CHANGED_ASSOC) {
- mutex_lock(&sc->lock);
sc->assoc = bss_conf->assoc;
if (sc->opmode == NL80211_IFTYPE_STATION)
set_beacon_filter(hw, sc->assoc);
- mutex_unlock(&sc->lock);
}
+
+ if (changes & BSS_CHANGED_BEACON &&
+ (vif->type == NL80211_IFTYPE_ADHOC ||
+ vif->type == NL80211_IFTYPE_MESH_POINT ||
+ vif->type == NL80211_IFTYPE_AP)) {
+ struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+ if (beacon)
+ ath5k_beacon_update(sc, beacon);
+ }
+
+ unlock:
+ mutex_unlock(&sc->lock);
}
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index c0fb3b09ba4..c56b494d417 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -156,6 +156,17 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah)
ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
}
+ AR5K_EEPROM_READ(AR5K_EEPROM_IS_HB63, val);
+
+ if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && val)
+ ee->ee_is_hb63 = true;
+ else
+ ee->ee_is_hb63 = false;
+
+ AR5K_EEPROM_READ(AR5K_EEPROM_RFKILL, val);
+ ee->ee_rfkill_pin = (u8) AR5K_REG_MS(val, AR5K_EEPROM_RFKILL_GPIO_SEL);
+ ee->ee_rfkill_pol = val & AR5K_EEPROM_RFKILL_POLARITY ? true : false;
+
return 0;
}
@@ -197,16 +208,16 @@ static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f;
ee->ee_ant_control[mode][i++] = val & 0x3f;
- /* Get antenna modes */
- ah->ah_antenna[mode][0] =
+ /* Get antenna switch tables */
+ ah->ah_ant_ctl[mode][AR5K_ANT_CTL] =
(ee->ee_ant_control[mode][0] << 4);
- ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
+ ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_A] =
ee->ee_ant_control[mode][1] |
(ee->ee_ant_control[mode][2] << 6) |
(ee->ee_ant_control[mode][3] << 12) |
(ee->ee_ant_control[mode][4] << 18) |
(ee->ee_ant_control[mode][5] << 24);
- ah->ah_antenna[mode][AR5K_ANT_FIXED_B] =
+ ah->ah_ant_ctl[mode][AR5K_ANT_SWTABLE_B] =
ee->ee_ant_control[mode][6] |
(ee->ee_ant_control[mode][7] << 6) |
(ee->ee_ant_control[mode][8] << 12) |
@@ -640,9 +651,9 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset)
static inline void
ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp)
{
- const static u16 intercepts3[] =
+ static const u16 intercepts3[] =
{ 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 };
- const static u16 intercepts3_2[] =
+ static const u16 intercepts3_2[] =
{ 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 };
const u16 *ip;
int i;
@@ -1694,9 +1705,40 @@ ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah)
return 0;
}
+static int
+ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 offset;
+ u16 val;
+ int ret = 0, i;
+
+ offset = AR5K_EEPROM_CTL(ee->ee_version) +
+ AR5K_EEPROM_N_CTLS(ee->ee_version);
+
+ if (ee->ee_version < AR5K_EEPROM_VERSION_5_3) {
+ /* No spur info for 5GHz */
+ ee->ee_spur_chans[0][0] = AR5K_EEPROM_NO_SPUR;
+ /* 2 channels for 2GHz (2464/2420) */
+ ee->ee_spur_chans[0][1] = AR5K_EEPROM_5413_SPUR_CHAN_1;
+ ee->ee_spur_chans[1][1] = AR5K_EEPROM_5413_SPUR_CHAN_2;
+ ee->ee_spur_chans[2][1] = AR5K_EEPROM_NO_SPUR;
+ } else if (ee->ee_version >= AR5K_EEPROM_VERSION_5_3) {
+ for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) {
+ AR5K_EEPROM_READ(offset, val);
+ ee->ee_spur_chans[i][0] = val;
+ AR5K_EEPROM_READ(offset + AR5K_EEPROM_N_SPUR_CHANS,
+ val);
+ ee->ee_spur_chans[i][1] = val;
+ offset++;
+ }
+ }
+
+ return ret;
+}
/*
- * Initialize eeprom power tables
+ * Initialize eeprom data structure
*/
int
ath5k_eeprom_init(struct ath5k_hw *ah)
@@ -1719,6 +1761,10 @@ ath5k_eeprom_init(struct ath5k_hw *ah)
if (err < 0)
return err;
+ err = ath5k_eeprom_read_spur_chans(ah);
+ if (err < 0)
+ return err;
+
return 0;
}
@@ -1754,16 +1800,3 @@ int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
return 0;
}
-
-bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah)
-{
- u16 data;
-
- ath5k_hw_eeprom_read(ah, AR5K_EEPROM_IS_HB63, &data);
-
- if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && data)
- return true;
- else
- return false;
-}
-
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index b0c0606dea0..64be73a5eda 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -26,6 +26,13 @@
#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */
#define AR5K_EEPROM_IS_HB63 0x000b /* Talon detect */
+
+#define AR5K_EEPROM_RFKILL 0x0f
+#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c
+#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2
+#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002
+#define AR5K_EEPROM_RFKILL_POLARITY_S 1
+
#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */
#define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */
#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */
@@ -66,11 +73,6 @@
#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */
#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz */
-#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c
-#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2
-#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002
-#define AR5K_EEPROM_RFKILL_POLARITY_S 1
-
/* Newer EEPROMs are using a different offset */
#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
(((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
@@ -211,6 +213,23 @@
#define AR5K_EEPROM_I_GAIN 10
#define AR5K_EEPROM_CCK_OFDM_DELTA 15
#define AR5K_EEPROM_N_IQ_CAL 2
+/* 5GHz/2GHz */
+enum ath5k_eeprom_freq_bands{
+ AR5K_EEPROM_BAND_5GHZ = 0,
+ AR5K_EEPROM_BAND_2GHZ = 1,
+ AR5K_EEPROM_N_FREQ_BANDS,
+};
+/* Spur chans per freq band */
+#define AR5K_EEPROM_N_SPUR_CHANS 5
+/* fbin value for chan 2464 x2 */
+#define AR5K_EEPROM_5413_SPUR_CHAN_1 1640
+/* fbin value for chan 2420 x2 */
+#define AR5K_EEPROM_5413_SPUR_CHAN_2 1200
+#define AR5K_EEPROM_SPUR_CHAN_MASK 0x3FFF
+#define AR5K_EEPROM_NO_SPUR 0x8000
+#define AR5K_SPUR_CHAN_WIDTH 87
+#define AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz 3125
+#define AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz 6250
#define AR5K_EEPROM_READ(_o, _v) do { \
ret = ath5k_hw_eeprom_read(ah, (_o), &(_v)); \
@@ -221,11 +240,11 @@
#define AR5K_EEPROM_READ_HDR(_o, _v) \
AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \
-enum ath5k_ant_setting {
- AR5K_ANT_VARIABLE = 0, /* variable by programming */
- AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */
- AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */
- AR5K_ANT_MAX = 3,
+enum ath5k_ant_table {
+ AR5K_ANT_CTL = 0, /* Idle switch table settings */
+ AR5K_ANT_SWTABLE_A = 1, /* Switch table for antenna A */
+ AR5K_ANT_SWTABLE_B = 2, /* Switch table for antenna B */
+ AR5K_ANT_MAX,
};
enum ath5k_ctl_mode {
@@ -369,6 +388,9 @@ struct ath5k_eeprom_info {
u16 ee_version;
u16 ee_header;
u16 ee_ant_gain;
+ u8 ee_rfkill_pin;
+ bool ee_rfkill_pol;
+ bool ee_is_hb63;
u16 ee_misc0;
u16 ee_misc1;
u16 ee_misc2;
@@ -436,6 +458,10 @@ struct ath5k_eeprom_info {
s8 ee_pga_desired_size_turbo[AR5K_EEPROM_N_MODES];
s8 ee_pd_gain_overlap;
+ /* Spur mitigation data (fbin values for spur channels) */
+ u16 ee_spur_chans[AR5K_EEPROM_N_SPUR_CHANS][AR5K_EEPROM_N_FREQ_BANDS];
+
+ /* Antenna raw switch tables */
u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
};
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index cbdc0b30842..876725f08b6 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -53,8 +53,6 @@
/* Devices we match on for LED config info (typically laptops) */
static const struct pci_device_id ath5k_led_devices[] = {
- /* IBM-specific AR5212 */
- { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
/* AR5211 */
{ PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5211), ATH_LED(0, 0) },
/* HP Compaq nc6xx, nc4000, nx6000 */
@@ -69,6 +67,10 @@ static const struct pci_device_id ath5k_led_devices[] = {
{ ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) },
/* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */
{ ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) },
+ /* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) },
+ /* IBM-specific AR5212 (all others) */
+ { PCI_VDEVICE(ATHEROS, PCI_DEVICE_ID_ATHEROS_AR5212_IBM), ATH_LED(0, 0) },
{ }
};
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 55122f1e198..579aa0a96ab 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -736,8 +736,8 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
/* When in AP mode zero timer0 to start TSF */
if (ah->ah_op_mode == NL80211_IFTYPE_AP)
ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
- else
- ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
+
+ ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
@@ -1003,7 +1003,7 @@ int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
* Note2: Windows driver (ndiswrapper) sets this to
* 0x00000714 instead of 0x00000007
*/
- if (ah->ah_version > AR5K_AR5211) {
+ if (ah->ah_version >= AR5K_AR5211) {
ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
AR5K_KEYTABLE_TYPE(entry));
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index b48b29dca3d..d0d1c350025 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -168,9 +168,6 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
* tx power and a Peak to Average Power Detector (PAPD) will try
* to measure the gain.
*
- * TODO: Use propper tx power setting for the probe packet so
- * that we don't observe a serious power drop on the receiver
- *
* XXX: How about forcing a tx packet (bypassing PCU arbitrator etc)
* just after we enable the probe so that we don't mess with
* standard traffic ? Maybe it's time to use sw interrupts and
@@ -186,7 +183,7 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
/* Send the packet with 2dB below max power as
* patent doc suggest */
- ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4,
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_ofdm - 4,
AR5K_PHY_PAPD_PROBE_TXPOWER) |
AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
@@ -1356,6 +1353,257 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
return ret;
}
+/***************************\
+* Spur mitigation functions *
+\***************************/
+
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ u8 refclk_freq;
+
+ if ((ah->ah_radio == AR5K_RF5112) ||
+ (ah->ah_radio == AR5K_RF5413) ||
+ (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+ refclk_freq = 40;
+ else
+ refclk_freq = 32;
+
+ if ((channel->center_freq % refclk_freq != 0) &&
+ ((channel->center_freq % refclk_freq < 10) ||
+ (channel->center_freq % refclk_freq > 22)))
+ return true;
+ else
+ return false;
+}
+
+void
+ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
+{
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+ u32 mag_mask[4] = {0, 0, 0, 0};
+ u32 pilot_mask[2] = {0, 0};
+ /* Note: fbin values are scaled up by 2 */
+ u16 spur_chan_fbin, chan_fbin, symbol_width, spur_detection_window;
+ s32 spur_delta_phase, spur_freq_sigma_delta;
+ s32 spur_offset, num_symbols_x16;
+ u8 num_symbol_offsets, i, freq_band;
+
+ /* Convert current frequency to fbin value (the same way channels
+ * are stored on EEPROM, check out ath5k_eeprom_bin2freq) and scale
+ * up by 2 so we can compare it later */
+ if (channel->hw_value & CHANNEL_2GHZ) {
+ chan_fbin = (channel->center_freq - 2300) * 10;
+ freq_band = AR5K_EEPROM_BAND_2GHZ;
+ } else {
+ chan_fbin = (channel->center_freq - 4900) * 10;
+ freq_band = AR5K_EEPROM_BAND_5GHZ;
+ }
+
+ /* Check if any spur_chan_fbin from EEPROM is
+ * within our current channel's spur detection range */
+ spur_chan_fbin = AR5K_EEPROM_NO_SPUR;
+ spur_detection_window = AR5K_SPUR_CHAN_WIDTH;
+ /* XXX: Half/Quarter channels ?*/
+ if (channel->hw_value & CHANNEL_TURBO)
+ spur_detection_window *= 2;
+
+ for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) {
+ spur_chan_fbin = ee->ee_spur_chans[i][freq_band];
+
+ /* Note: mask cleans AR5K_EEPROM_NO_SPUR flag
+ * so it's zero if we got nothing from EEPROM */
+ if (spur_chan_fbin == AR5K_EEPROM_NO_SPUR) {
+ spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK;
+ break;
+ }
+
+ if ((chan_fbin - spur_detection_window <=
+ (spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK)) &&
+ (chan_fbin + spur_detection_window >=
+ (spur_chan_fbin & AR5K_EEPROM_SPUR_CHAN_MASK))) {
+ spur_chan_fbin &= AR5K_EEPROM_SPUR_CHAN_MASK;
+ break;
+ }
+ }
+
+ /* We need to enable spur filter for this channel */
+ if (spur_chan_fbin) {
+ spur_offset = spur_chan_fbin - chan_fbin;
+ /*
+ * Calculate deltas:
+ * spur_freq_sigma_delta -> spur_offset / sample_freq << 21
+ * spur_delta_phase -> spur_offset / chip_freq << 11
+ * Note: Both values have 100KHz resolution
+ */
+ /* XXX: Half/Quarter rate channels ? */
+ switch (channel->hw_value) {
+ case CHANNEL_A:
+ /* Both sample_freq and chip_freq are 40MHz */
+ spur_delta_phase = (spur_offset << 17) / 25;
+ spur_freq_sigma_delta = (spur_delta_phase >> 10);
+ symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+ break;
+ case CHANNEL_G:
+ /* sample_freq -> 40MHz chip_freq -> 44MHz
+ * (for b compatibility) */
+ spur_freq_sigma_delta = (spur_offset << 8) / 55;
+ spur_delta_phase = (spur_offset << 17) / 25;
+ symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+ break;
+ case CHANNEL_T:
+ case CHANNEL_TG:
+ /* Both sample_freq and chip_freq are 80MHz */
+ spur_delta_phase = (spur_offset << 16) / 25;
+ spur_freq_sigma_delta = (spur_delta_phase >> 10);
+ symbol_width = AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz;
+ break;
+ default:
+ return;
+ }
+
+ /* Calculate pilot and magnitude masks */
+
+ /* Scale up spur_offset by 1000 to switch to 100HZ resolution
+ * and divide by symbol_width to find how many symbols we have
+ * Note: number of symbols is scaled up by 16 */
+ num_symbols_x16 = ((spur_offset * 1000) << 4) / symbol_width;
+
+ /* Spur is on a symbol if num_symbols_x16 % 16 is zero */
+ if (!(num_symbols_x16 & 0xF))
+ /* _X_ */
+ num_symbol_offsets = 3;
+ else
+ /* _xx_ */
+ num_symbol_offsets = 4;
+
+ for (i = 0; i < num_symbol_offsets; i++) {
+
+ /* Calculate pilot mask */
+ s32 curr_sym_off =
+ (num_symbols_x16 / 16) + i + 25;
+
+ /* Pilot magnitude mask seems to be a way to
+ * declare the boundaries for our detection
+ * window or something, it's 2 for the middle
+ * value(s) where the symbol is expected to be
+ * and 1 on the boundary values */
+ u8 plt_mag_map =
+ (i == 0 || i == (num_symbol_offsets - 1))
+ ? 1 : 2;
+
+ if (curr_sym_off >= 0 && curr_sym_off <= 32) {
+ if (curr_sym_off <= 25)
+ pilot_mask[0] |= 1 << curr_sym_off;
+ else if (curr_sym_off >= 27)
+ pilot_mask[0] |= 1 << (curr_sym_off - 1);
+ } else if (curr_sym_off >= 33 && curr_sym_off <= 52)
+ pilot_mask[1] |= 1 << (curr_sym_off - 33);
+
+ /* Calculate magnitude mask (for viterbi decoder) */
+ if (curr_sym_off >= -1 && curr_sym_off <= 14)
+ mag_mask[0] |=
+ plt_mag_map << (curr_sym_off + 1) * 2;
+ else if (curr_sym_off >= 15 && curr_sym_off <= 30)
+ mag_mask[1] |=
+ plt_mag_map << (curr_sym_off - 15) * 2;
+ else if (curr_sym_off >= 31 && curr_sym_off <= 46)
+ mag_mask[2] |=
+ plt_mag_map << (curr_sym_off - 31) * 2;
+ else if (curr_sym_off >= 46 && curr_sym_off <= 53)
+ mag_mask[3] |=
+ plt_mag_map << (curr_sym_off - 47) * 2;
+
+ }
+
+ /* Write settings on hw to enable spur filter */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_RATE, 0xff);
+ /* XXX: Self correlator also ? */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_PILOT_MASK_EN |
+ AR5K_PHY_IQ_CHAN_MASK_EN |
+ AR5K_PHY_IQ_SPUR_FILT_EN);
+
+ /* Set delta phase and freq sigma delta */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(spur_delta_phase,
+ AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE) |
+ AR5K_REG_SM(spur_freq_sigma_delta,
+ AR5K_PHY_TIMING_11_SPUR_FREQ_SD) |
+ AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC,
+ AR5K_PHY_TIMING_11);
+
+ /* Write pilot masks */
+ ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_7);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8,
+ AR5K_PHY_TIMING_8_PILOT_MASK_2,
+ pilot_mask[1]);
+
+ ath5k_hw_reg_write(ah, pilot_mask[0], AR5K_PHY_TIMING_9);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10,
+ AR5K_PHY_TIMING_10_PILOT_MASK_2,
+ pilot_mask[1]);
+
+ /* Write magnitude masks */
+ ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK_1);
+ ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK_2);
+ ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_MASK_4,
+ mag_mask[3]);
+
+ ath5k_hw_reg_write(ah, mag_mask[0], AR5K_PHY_BIN_MASK2_1);
+ ath5k_hw_reg_write(ah, mag_mask[1], AR5K_PHY_BIN_MASK2_2);
+ ath5k_hw_reg_write(ah, mag_mask[2], AR5K_PHY_BIN_MASK2_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4,
+ AR5K_PHY_BIN_MASK2_4_MASK_4,
+ mag_mask[3]);
+
+ } else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) &
+ AR5K_PHY_IQ_SPUR_FILT_EN) {
+ /* Clean up spur mitigation settings and disable fliter */
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_RATE, 0);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_IQ,
+ AR5K_PHY_IQ_PILOT_MASK_EN |
+ AR5K_PHY_IQ_CHAN_MASK_EN |
+ AR5K_PHY_IQ_SPUR_FILT_EN);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_11);
+
+ /* Clear pilot masks */
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_7);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_8,
+ AR5K_PHY_TIMING_8_PILOT_MASK_2,
+ 0);
+
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_TIMING_9);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_10,
+ AR5K_PHY_TIMING_10_PILOT_MASK_2,
+ 0);
+
+ /* Clear magnitude masks */
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_1);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_2);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK_CTL,
+ AR5K_PHY_BIN_MASK_CTL_MASK_4,
+ 0);
+
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_1);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_2);
+ ath5k_hw_reg_write(ah, 0, AR5K_PHY_BIN_MASK2_3);
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_BIN_MASK2_4,
+ AR5K_PHY_BIN_MASK2_4_MASK_4,
+ 0);
+ }
+}
+
+/********************\
+ Misc PHY functions
+\********************/
+
int ath5k_hw_phy_disable(struct ath5k_hw *ah)
{
ATH5K_TRACE(ah->ah_sc);
@@ -1365,10 +1613,6 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah)
return 0;
}
-/********************\
- Misc PHY functions
-\********************/
-
/*
* Get the PHY Chip revision
*/
@@ -1417,25 +1661,189 @@ u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan)
return ret;
}
+/*****************\
+* Antenna control *
+\*****************/
+
void /*TODO:Boundary check*/
-ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant)
+ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant)
{
ATH5K_TRACE(ah->ah_sc);
- /*Just a try M.F.*/
+
if (ah->ah_version != AR5K_AR5210)
- ath5k_hw_reg_write(ah, ant, AR5K_DEFAULT_ANTENNA);
+ ath5k_hw_reg_write(ah, ant & 0x7, AR5K_DEFAULT_ANTENNA);
}
unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah)
{
ATH5K_TRACE(ah->ah_sc);
- /*Just a try M.F.*/
+
if (ah->ah_version != AR5K_AR5210)
- return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+ return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA) & 0x7;
return false; /*XXX: What do we return for 5210 ?*/
}
+/*
+ * Enable/disable fast rx antenna diversity
+ */
+static void
+ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable)
+{
+ switch (ee_mode) {
+ case AR5K_EEPROM_MODE_11G:
+ /* XXX: This is set to
+ * disabled on initvals !!! */
+ case AR5K_EEPROM_MODE_11A:
+ if (enable)
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+ else
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+ break;
+ case AR5K_EEPROM_MODE_11B:
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_OFDM_DIV_DIS);
+ break;
+ default:
+ return;
+ }
+
+ if (enable) {
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART,
+ AR5K_PHY_RESTART_DIV_GC, 0xc);
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV,
+ AR5K_PHY_FAST_ANT_DIV_EN);
+ } else {
+ AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RESTART,
+ AR5K_PHY_RESTART_DIV_GC, 0x8);
+
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_FAST_ANT_DIV,
+ AR5K_PHY_FAST_ANT_DIV_EN);
+ }
+}
+
+/*
+ * Set antenna operating mode
+ */
+void
+ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
+{
+ struct ieee80211_channel *channel = &ah->ah_current_channel;
+ bool use_def_for_tx, update_def_on_tx, use_def_for_rts, fast_div;
+ bool use_def_for_sg;
+ u8 def_ant, tx_ant, ee_mode;
+ u32 sta_id1 = 0;
+
+ def_ant = ah->ah_def_ant;
+
+ ATH5K_TRACE(ah->ah_sc);
+
+ switch (channel->hw_value & CHANNEL_MODES) {
+ case CHANNEL_A:
+ case CHANNEL_T:
+ case CHANNEL_XR:
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case CHANNEL_G:
+ case CHANNEL_TG:
+ ee_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ case CHANNEL_B:
+ ee_mode = AR5K_EEPROM_MODE_11B;
+ break;
+ default:
+ ATH5K_ERR(ah->ah_sc,
+ "invalid channel: %d\n", channel->center_freq);
+ return;
+ }
+
+ switch (ant_mode) {
+ case AR5K_ANTMODE_DEFAULT:
+ tx_ant = 0;
+ use_def_for_tx = false;
+ update_def_on_tx = false;
+ use_def_for_rts = false;
+ use_def_for_sg = false;
+ fast_div = true;
+ break;
+ case AR5K_ANTMODE_FIXED_A:
+ def_ant = 1;
+ tx_ant = 0;
+ use_def_for_tx = true;
+ update_def_on_tx = false;
+ use_def_for_rts = true;
+ use_def_for_sg = true;
+ fast_div = false;
+ break;
+ case AR5K_ANTMODE_FIXED_B:
+ def_ant = 2;
+ tx_ant = 0;
+ use_def_for_tx = true;
+ update_def_on_tx = false;
+ use_def_for_rts = true;
+ use_def_for_sg = true;
+ fast_div = false;
+ break;
+ case AR5K_ANTMODE_SINGLE_AP:
+ def_ant = 1; /* updated on tx */
+ tx_ant = 0;
+ use_def_for_tx = true;
+ update_def_on_tx = true;
+ use_def_for_rts = true;
+ use_def_for_sg = true;
+ fast_div = true;
+ break;
+ case AR5K_ANTMODE_SECTOR_AP:
+ tx_ant = 1; /* variable */
+ use_def_for_tx = false;
+ update_def_on_tx = false;
+ use_def_for_rts = true;
+ use_def_for_sg = false;
+ fast_div = false;
+ break;
+ case AR5K_ANTMODE_SECTOR_STA:
+ tx_ant = 1; /* variable */
+ use_def_for_tx = true;
+ update_def_on_tx = false;
+ use_def_for_rts = true;
+ use_def_for_sg = false;
+ fast_div = true;
+ break;
+ case AR5K_ANTMODE_DEBUG:
+ def_ant = 1;
+ tx_ant = 2;
+ use_def_for_tx = false;
+ update_def_on_tx = false;
+ use_def_for_rts = false;
+ use_def_for_sg = false;
+ fast_div = false;
+ break;
+ default:
+ return;
+ }
+
+ ah->ah_tx_ant = tx_ant;
+ ah->ah_ant_mode = ant_mode;
+
+ sta_id1 |= use_def_for_tx ? AR5K_STA_ID1_DEFAULT_ANTENNA : 0;
+ sta_id1 |= update_def_on_tx ? AR5K_STA_ID1_DESC_ANTENNA : 0;
+ sta_id1 |= use_def_for_rts ? AR5K_STA_ID1_RTS_DEF_ANTENNA : 0;
+ sta_id1 |= use_def_for_sg ? AR5K_STA_ID1_SELFGEN_DEF_ANT : 0;
+
+ AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, AR5K_STA_ID1_ANTENNA_SETTINGS);
+
+ if (sta_id1)
+ AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, sta_id1);
+
+ /* Note: set diversity before default antenna
+ * because it won't work correctly */
+ ath5k_hw_set_fast_div(ah, ee_mode, fast_div);
+ ath5k_hw_set_def_antenna(ah, def_ant);
+}
+
/****************\
* TX power setup *
@@ -1750,8 +2158,6 @@ done:
* Get the max edge power for this channel if
* we have such data from EEPROM's Conformance Test
* Limits (CTL), and limit max power if needed.
- *
- * FIXME: Only works for world regulatory domains
*/
static void
ath5k_get_max_ctl_power(struct ath5k_hw *ah,
@@ -1767,26 +2173,23 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah,
u8 ctl_idx = 0xFF;
u32 target = channel->center_freq;
- /* Find out a CTL for our mode that's not mapped
- * on a specific reg domain.
- *
- * TODO: Map our current reg domain to one of the 3 available
- * reg domain ids so that we can support more CTLs. */
+ ctl_mode = ath_regd_get_band_ctl(&ah->ah_regulatory, channel->band);
+
switch (channel->hw_value & CHANNEL_MODES) {
case CHANNEL_A:
- ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN;
+ ctl_mode |= AR5K_CTL_11A;
break;
case CHANNEL_G:
- ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN;
+ ctl_mode |= AR5K_CTL_11G;
break;
case CHANNEL_B:
- ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN;
+ ctl_mode |= AR5K_CTL_11B;
break;
case CHANNEL_T:
- ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN;
+ ctl_mode |= AR5K_CTL_TURBO;
break;
case CHANNEL_TG:
- ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN;
+ ctl_mode |= AR5K_CTL_TURBOG;
break;
case CHANNEL_XR:
/* Fall through */
@@ -2482,8 +2885,19 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
for (i = 8; i <= 15; i++)
rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta;
- ah->ah_txpower.txp_min_pwr = rates[7];
- ah->ah_txpower.txp_max_pwr = rates[0];
+ /* Now that we have all rates setup use table offset to
+ * match the power range set by user with the power indices
+ * on PCDAC/PDADC table */
+ for (i = 0; i < 16; i++) {
+ rates[i] += ah->ah_txpower.txp_offset;
+ /* Don't get out of bounds */
+ if (rates[i] > 63)
+ rates[i] = 63;
+ }
+
+ /* Min/max in 0.25dB units */
+ ah->ah_txpower.txp_min_pwr = 2 * rates[7];
+ ah->ah_txpower.txp_max_pwr = 2 * rates[0];
ah->ah_txpower.txp_ofdm = rates[7];
}
@@ -2591,16 +3005,37 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
return 0;
}
-int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower)
+int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
{
/*Just a try M.F.*/
struct ieee80211_channel *channel = &ah->ah_current_channel;
+ u8 ee_mode;
ATH5K_TRACE(ah->ah_sc);
+
+ switch (channel->hw_value & CHANNEL_MODES) {
+ case CHANNEL_A:
+ case CHANNEL_T:
+ case CHANNEL_XR:
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case CHANNEL_G:
+ case CHANNEL_TG:
+ ee_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ case CHANNEL_B:
+ ee_mode = AR5K_EEPROM_MODE_11B;
+ break;
+ default:
+ ATH5K_ERR(ah->ah_sc,
+ "invalid channel: %d\n", channel->center_freq);
+ return -EINVAL;
+ }
+
ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
"changing txpower to %d\n", txpower);
- return ath5k_hw_txpower(ah, channel, mode, txpower);
+ return ath5k_hw_txpower(ah, channel, ee_mode, txpower);
}
#undef _ATH5K_PHY
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index 5094c394a4b..73407b3f53e 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -160,7 +160,8 @@ u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
if (ah->ah_version == AR5K_AR5210)
return false;
- pending = (AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT);
+ pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue));
+ pending &= AR5K_QCU_STS_FRMPENDCNT;
/* It's possible to have no frames pending even if TXE
* is set. To indicate that q has not stopped return
@@ -401,14 +402,16 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
AR5K_DCU_MISC_ARBLOCK_CTL_S) |
+ AR5K_DCU_MISC_ARBLOCK_IGNORE |
AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
AR5K_DCU_MISC_BCN_ENABLE);
break;
case AR5K_TX_QUEUE_CAB:
AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
- AR5K_QCU_MISC_FRSHED_DBA_GT |
+ AR5K_QCU_MISC_FRSHED_BCN_SENT_GT |
AR5K_QCU_MISC_CBREXP_DIS |
+ AR5K_QCU_MISC_RDY_VEOL_POLICY |
AR5K_QCU_MISC_CBREXP_BCN_DIS);
ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 7070d1543cd..6809b54a2ad 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1148,6 +1148,11 @@
#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */
#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */
+#define AR5K_STA_ID1_ANTENNA_SETTINGS (AR5K_STA_ID1_DEFAULT_ANTENNA | \
+ AR5K_STA_ID1_DESC_ANTENNA | \
+ AR5K_STA_ID1_RTS_DEF_ANTENNA | \
+ AR5K_STA_ID1_SELFGEN_DEF_ANT)
+
/*
* First BSSID register (MAC address, lower 32bits)
*/
@@ -2028,7 +2033,9 @@
#define AR5K_PHY_AGCCTL 0x9860 /* Register address */
#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */
#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */
+#define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */
#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */
+#define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */
#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */
/*
@@ -2528,7 +2535,7 @@
* PHY CCK Cross-correlator Barker RSSI threshold register [5212+]
*/
#define AR5K_PHY_CCK_CROSSCORR 0xa208
-#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f
+#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000003f
#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0
/* Same address is used for antenna diversity activation */
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 775fdf78554..c1862f8a2e7 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -507,7 +507,7 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
scal = AR5K_PHY_SCAL_32MHZ_2417;
- else if (ath5k_eeprom_is_hb63(ah))
+ else if (ee->ee_is_hb63)
scal = AR5K_PHY_SCAL_32MHZ_HB63;
else
scal = AR5K_PHY_SCAL_32MHZ;
@@ -536,26 +536,6 @@ static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
return;
}
-static bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
- struct ieee80211_channel *channel)
-{
- u8 refclk_freq;
-
- if ((ah->ah_radio == AR5K_RF5112) ||
- (ah->ah_radio == AR5K_RF5413) ||
- (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
- refclk_freq = 40;
- else
- refclk_freq = 32;
-
- if ((channel->center_freq % refclk_freq != 0) &&
- ((channel->center_freq % refclk_freq < 10) ||
- (channel->center_freq % refclk_freq > 22)))
- return true;
- else
- return false;
-}
-
/* TODO: Half/Quarter rate */
static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
@@ -598,9 +578,10 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
/* Set DAC/ADC delays */
if (ah->ah_version == AR5K_AR5212) {
u32 scal;
+ struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
scal = AR5K_PHY_SCAL_32MHZ_2417;
- else if (ath5k_eeprom_is_hb63(ah))
+ else if (ee->ee_is_hb63)
scal = AR5K_PHY_SCAL_32MHZ_HB63;
else
scal = AR5K_PHY_SCAL_32MHZ;
@@ -697,13 +678,13 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
/* Set antenna idle switch table */
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
- (ah->ah_antenna[ee_mode][0] |
+ (ah->ah_ant_ctl[ee_mode][0] |
AR5K_PHY_ANT_CTL_TXRX_EN));
- /* Set antenna switch table */
- ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
+ /* Set antenna switch tables */
+ ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[0]],
AR5K_PHY_ANT_SWITCH_TABLE_0);
- ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
+ ath5k_hw_reg_write(ah, ah->ah_ant_ctl[ee_mode][ant[1]],
AR5K_PHY_ANT_SWITCH_TABLE_1);
/* Noise floor threshold */
@@ -997,10 +978,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
ath5k_hw_tweak_initval_settings(ah, channel);
/*
- * Set TX power (FIXME)
+ * Set TX power
*/
ret = ath5k_hw_txpower(ah, channel, ee_mode,
- AR5K_TUNE_DEFAULT_TXPOWER);
+ ah->ah_txpower.txp_max_pwr / 2);
if (ret)
return ret;
@@ -1023,9 +1004,22 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
/* Write OFDM timings on 5212*/
if (ah->ah_version == AR5K_AR5212 &&
channel->hw_value & CHANNEL_OFDM) {
+ struct ath5k_eeprom_info *ee =
+ &ah->ah_capabilities.cap_eeprom;
+
ret = ath5k_hw_write_ofdm_timings(ah, channel);
if (ret)
return ret;
+
+ /* Note: According to docs we can have a newer
+ * EEPROM on old hardware, so we need to verify
+ * that our hardware is new enough to have spur
+ * mitigation registers (delta phase etc) */
+ if (ah->ah_mac_srev >= AR5K_SREV_AR5424 ||
+ (ah->ah_mac_srev >= AR5K_SREV_AR5424 &&
+ ee->ee_version >= AR5K_EEPROM_VERSION_5_3))
+ ath5k_hw_set_spur_mitigation_filter(ah,
+ channel);
}
/*Enable/disable 802.11b mode on 5111
@@ -1041,17 +1035,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
/*
* In case a fixed antenna was set as default
- * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
- * registers.
+ * use the same switch table twice.
*/
- if (s_ant != 0) {
- if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
- ant[0] = ant[1] = AR5K_ANT_FIXED_A;
- else /* 2 - Aux */
- ant[0] = ant[1] = AR5K_ANT_FIXED_B;
- } else {
- ant[0] = AR5K_ANT_FIXED_A;
- ant[1] = AR5K_ANT_FIXED_B;
+ if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_A)
+ ant[0] = ant[1] = AR5K_ANT_SWTABLE_A;
+ else if (ah->ah_ant_mode == AR5K_ANTMODE_FIXED_B)
+ ant[0] = ant[1] = AR5K_ANT_SWTABLE_B;
+ else {
+ ant[0] = AR5K_ANT_SWTABLE_A;
+ ant[1] = AR5K_ANT_SWTABLE_B;
}
/* Commit values from EEPROM */
@@ -1259,6 +1251,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
*/
ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+ /* Restore antenna mode */
+ ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
/*
* Configure QCUs/DCUs
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index c92d46fa9d5..10ffc944285 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -576,8 +576,8 @@ struct ath_softc {
struct ath_tx tx;
struct ath_beacon beacon;
struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX];
- struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX];
- struct ath_rate_table *cur_rate_table;
+ const struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX];
+ const struct ath_rate_table *cur_rate_table;
struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
struct ath_led radio_led;
@@ -590,6 +590,8 @@ struct ath_softc {
int led_on_cnt;
int led_off_cnt;
+ int beacon_interval;
+
struct ath_rfkill rf_kill;
struct ath_ani ani;
struct ath9k_node_stats nodestats;
@@ -695,36 +697,7 @@ void ath9k_wiphy_pause_all_forced(struct ath_softc *sc,
bool ath9k_wiphy_scanning(struct ath_softc *sc);
void ath9k_wiphy_work(struct work_struct *work);
-/*
- * Read and write, they both share the same lock. We do this to serialize
- * reads and writes on Atheros 802.11n PCI devices only. This is required
- * as the FIFO on these devices can only accept sanely 2 requests. After
- * that the device goes bananas. Serializing the reads/writes prevents this
- * from happening.
- */
-
-static inline void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
-{
- if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
- unsigned long flags;
- spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
- iowrite32(val, ah->ah_sc->mem + reg_offset);
- spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
- } else
- iowrite32(val, ah->ah_sc->mem + reg_offset);
-}
-
-static inline unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
-{
- u32 val;
- if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
- unsigned long flags;
- spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
- val = ioread32(ah->ah_sc->mem + reg_offset);
- spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
- } else
- val = ioread32(ah->ah_sc->mem + reg_offset);
- return val;
-}
+void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val);
+unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset);
#endif /* ATH9K_H */
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index eb4759fc6a0..3a7154beeae 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -63,7 +63,7 @@ static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
struct ath_hw *ah = sc->sc_ah;
struct ath_desc *ds;
struct ath9k_11n_rate_series series[4];
- struct ath_rate_table *rt;
+ const struct ath_rate_table *rt;
int flags, antenna, ctsrate = 0, ctsduration = 0;
u8 rate;
@@ -320,8 +320,7 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
u64 tsfadjust;
int intval;
- intval = sc->hw->conf.beacon_int ?
- sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+ intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
/*
* Calculate the TSF offset for this beacon slot, i.e., the
@@ -431,8 +430,7 @@ void ath_beacon_tasklet(unsigned long data)
* on the tsf to safeguard against missing an swba.
*/
- intval = sc->hw->conf.beacon_int ?
- sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+ intval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
tsf = ath9k_hw_gettsf64(ah);
tsftu = TSF_TO_TU(tsf>>32, tsf);
@@ -711,8 +709,7 @@ void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
/* Setup the beacon configuration parameters */
memset(&conf, 0, sizeof(struct ath_beacon_config));
- conf.beacon_interval = sc->hw->conf.beacon_int ?
- sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+ conf.beacon_interval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
conf.listen_interval = 1;
conf.dtim_period = conf.beacon_interval;
conf.dtim_count = 1;
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index a197041d76b..a32d7e7fecb 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -863,7 +863,7 @@ bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
}
if (longcal) {
- if (AR_SREV_9285(ah) && AR_SREV_9285_11_OR_LATER(ah))
+ if (AR_SREV_9285_11_OR_LATER(ah))
ath9k_hw_9285_pa_cal(ah);
if (OLC_FOR_AR9280_20_LATER)
@@ -917,7 +917,7 @@ static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
{
- if (AR_SREV_9285(ah) && AR_SREV_9285_12_OR_LATER(ah)) {
+ if (AR_SREV_9285_12_OR_LATER(ah)) {
if (!ar9285_clc(ah, chan))
return false;
} else {
@@ -947,7 +947,7 @@ bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
}
/* Do PA Calibration */
- if (AR_SREV_9285(ah) && AR_SREV_9285_11_OR_LATER(ah))
+ if (AR_SREV_9285_11_OR_LATER(ah))
ath9k_hw_9285_pa_cal(ah);
/* Do NF Calibration after DC offset and other calibrations */
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index ec2a7a40b00..5879c731e9e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -84,6 +84,38 @@ static u32 ath9k_hw_mac_to_clks(struct ath_hw *ah, u32 usecs)
return ath9k_hw_mac_clks(ah, usecs);
}
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests. After
+ * that the device goes bananas. Serializing the reads/writes prevents this
+ * from happening.
+ */
+
+void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
+{
+ if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+ iowrite32(val, ah->ah_sc->mem + reg_offset);
+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+ } else
+ iowrite32(val, ah->ah_sc->mem + reg_offset);
+}
+
+unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
+{
+ u32 val;
+ if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+ val = ioread32(ah->ah_sc->mem + reg_offset);
+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+ } else
+ val = ioread32(ah->ah_sc->mem + reg_offset);
+ return val;
+}
+
bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
{
int i;
@@ -136,7 +168,7 @@ bool ath9k_get_channel_edges(struct ath_hw *ah,
}
u16 ath9k_hw_computetxtime(struct ath_hw *ah,
- struct ath_rate_table *rates,
+ const struct ath_rate_table *rates,
u32 frameLen, u16 rateix,
bool shortPreamble)
{
@@ -1313,8 +1345,7 @@ static int ath9k_hw_process_ini(struct ath_hw *ah,
if (AR_SREV_9280(ah))
REG_WRITE_ARRAY(&ah->iniModesRxGain, modesIndex, regWrites);
- if (AR_SREV_9280(ah) || (AR_SREV_9285(ah) &&
- AR_SREV_9285_12_OR_LATER(ah)))
+ if (AR_SREV_9280(ah) || AR_SREV_9285_12_OR_LATER(ah))
REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites);
for (i = 0; i < ah->iniCommon.ia_rows; i++) {
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index ab3412672e3..ddb24c47ebc 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -580,7 +580,8 @@ bool ath9k_hw_setantennaswitch(struct ath_hw *ah,
bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
u32 ath9k_hw_reverse_bits(u32 val, u32 n);
bool ath9k_get_channel_edges(struct ath_hw *ah, u16 flags, u16 *low, u16 *high);
-u16 ath9k_hw_computetxtime(struct ath_hw *ah, struct ath_rate_table *rates,
+u16 ath9k_hw_computetxtime(struct ath_hw *ah,
+ const struct ath_rate_table *rates,
u32 frameLen, u16 rateix, bool shortPreamble);
void ath9k_hw_get_channel_centers(struct ath_hw *ah,
struct ath9k_channel *chan,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 2398d4f45f2..bbbfdcde272 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -189,7 +189,7 @@ static u8 parse_mpdudensity(u8 mpdudensity)
static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
{
- struct ath_rate_table *rate_table = NULL;
+ const struct ath_rate_table *rate_table = NULL;
struct ieee80211_supported_band *sband;
struct ieee80211_rate *rate;
int i, maxrates;
@@ -2358,114 +2358,6 @@ skip_chan_change:
if (changed & IEEE80211_CONF_CHANGE_POWER)
sc->config.txpowlimit = 2 * conf->power_level;
- /*
- * The HW TSF has to be reset when the beacon interval changes.
- * We set the flag here, and ath_beacon_config_ap() would take this
- * into account when it gets called through the subsequent
- * config_interface() call - with IFCC_BEACON in the changed field.
- */
-
- if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
- sc->sc_flags |= SC_OP_TSF_RESET;
-
- mutex_unlock(&sc->mutex);
-
- return 0;
-}
-
-static int ath9k_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
- struct ath_hw *ah = sc->sc_ah;
- struct ath_vif *avp = (void *)vif->drv_priv;
- u32 rfilt = 0;
- int error, i;
-
- mutex_lock(&sc->mutex);
-
- /* TODO: Need to decide which hw opmode to use for multi-interface
- * cases */
- if (vif->type == NL80211_IFTYPE_AP &&
- ah->opmode != NL80211_IFTYPE_AP) {
- ah->opmode = NL80211_IFTYPE_STATION;
- ath9k_hw_setopmode(ah);
- memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
- sc->curaid = 0;
- ath9k_hw_write_associd(sc);
- /* Request full reset to get hw opmode changed properly */
- sc->sc_flags |= SC_OP_FULL_RESET;
- }
-
- if ((conf->changed & IEEE80211_IFCC_BSSID) &&
- !is_zero_ether_addr(conf->bssid)) {
- switch (vif->type) {
- case NL80211_IFTYPE_STATION:
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_MESH_POINT:
- /* Set BSSID */
- memcpy(sc->curbssid, conf->bssid, ETH_ALEN);
- memcpy(avp->bssid, conf->bssid, ETH_ALEN);
- sc->curaid = 0;
- ath9k_hw_write_associd(sc);
-
- /* Set aggregation protection mode parameters */
- sc->config.ath_aggr_prot = 0;
-
- DPRINTF(sc, ATH_DBG_CONFIG,
- "RX filter 0x%x bssid %pM aid 0x%x\n",
- rfilt, sc->curbssid, sc->curaid);
-
- /* need to reconfigure the beacon */
- sc->sc_flags &= ~SC_OP_BEACONS ;
-
- break;
- default:
- break;
- }
- }
-
- if ((vif->type == NL80211_IFTYPE_ADHOC) ||
- (vif->type == NL80211_IFTYPE_AP) ||
- (vif->type == NL80211_IFTYPE_MESH_POINT)) {
- if ((conf->changed & IEEE80211_IFCC_BEACON) ||
- (conf->changed & IEEE80211_IFCC_BEACON_ENABLED &&
- conf->enable_beacon)) {
- /*
- * Allocate and setup the beacon frame.
- *
- * Stop any previous beacon DMA. This may be
- * necessary, for example, when an ibss merge
- * causes reconfiguration; we may be called
- * with beacon transmission active.
- */
- ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
-
- error = ath_beacon_alloc(aphy, vif);
- if (error != 0) {
- mutex_unlock(&sc->mutex);
- return error;
- }
-
- ath_beacon_config(sc, vif);
- }
- }
-
- /* Check for WLAN_CAPABILITY_PRIVACY ? */
- if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
- for (i = 0; i < IEEE80211_WEP_NKID; i++)
- if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
- ath9k_hw_keysetmac(sc->sc_ah,
- (u16)i,
- sc->curbssid);
- }
-
- /* Only legacy IBSS for now */
- if (vif->type == NL80211_IFTYPE_ADHOC)
- ath_update_chainmask(sc, 0);
-
mutex_unlock(&sc->mutex);
return 0;
@@ -2607,9 +2499,92 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
{
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_vif *avp = (void *)vif->drv_priv;
+ u32 rfilt = 0;
+ int error, i;
mutex_lock(&sc->mutex);
+ /*
+ * TODO: Need to decide which hw opmode to use for
+ * multi-interface cases
+ * XXX: This belongs into add_interface!
+ */
+ if (vif->type == NL80211_IFTYPE_AP &&
+ ah->opmode != NL80211_IFTYPE_AP) {
+ ah->opmode = NL80211_IFTYPE_STATION;
+ ath9k_hw_setopmode(ah);
+ memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
+ sc->curaid = 0;
+ ath9k_hw_write_associd(sc);
+ /* Request full reset to get hw opmode changed properly */
+ sc->sc_flags |= SC_OP_FULL_RESET;
+ }
+
+ if ((changed & BSS_CHANGED_BSSID) &&
+ !is_zero_ether_addr(bss_conf->bssid)) {
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ /* Set BSSID */
+ memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN);
+ memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
+ sc->curaid = 0;
+ ath9k_hw_write_associd(sc);
+
+ /* Set aggregation protection mode parameters */
+ sc->config.ath_aggr_prot = 0;
+
+ DPRINTF(sc, ATH_DBG_CONFIG,
+ "RX filter 0x%x bssid %pM aid 0x%x\n",
+ rfilt, sc->curbssid, sc->curaid);
+
+ /* need to reconfigure the beacon */
+ sc->sc_flags &= ~SC_OP_BEACONS ;
+
+ break;
+ default:
+ break;
+ }
+ }
+
+ if ((vif->type == NL80211_IFTYPE_ADHOC) ||
+ (vif->type == NL80211_IFTYPE_AP) ||
+ (vif->type == NL80211_IFTYPE_MESH_POINT)) {
+ if ((changed & BSS_CHANGED_BEACON) ||
+ (changed & BSS_CHANGED_BEACON_ENABLED &&
+ bss_conf->enable_beacon)) {
+ /*
+ * Allocate and setup the beacon frame.
+ *
+ * Stop any previous beacon DMA. This may be
+ * necessary, for example, when an ibss merge
+ * causes reconfiguration; we may be called
+ * with beacon transmission active.
+ */
+ ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
+
+ error = ath_beacon_alloc(aphy, vif);
+ if (!error)
+ ath_beacon_config(sc, vif);
+ }
+ }
+
+ /* Check for WLAN_CAPABILITY_PRIVACY ? */
+ if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
+ for (i = 0; i < IEEE80211_WEP_NKID; i++)
+ if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
+ ath9k_hw_keysetmac(sc->sc_ah,
+ (u16)i,
+ sc->curbssid);
+ }
+
+ /* Only legacy IBSS for now */
+ if (vif->type == NL80211_IFTYPE_ADHOC)
+ ath_update_chainmask(sc, 0);
+
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
bss_conf->use_short_preamble);
@@ -2635,6 +2610,18 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
ath9k_bss_assoc_info(sc, vif, bss_conf);
}
+ /*
+ * The HW TSF has to be reset when the beacon interval changes.
+ * We set the flag here, and ath_beacon_config_ap() would take this
+ * into account when it gets called through the subsequent
+ * config_interface() call - with IFCC_BEACON in the changed field.
+ */
+
+ if (changed & BSS_CHANGED_BEACON_INT) {
+ sc->sc_flags |= SC_OP_TSF_RESET;
+ sc->beacon_interval = bss_conf->beacon_int;
+ }
+
mutex_unlock(&sc->mutex);
}
@@ -2755,7 +2742,6 @@ struct ieee80211_ops ath9k_ops = {
.add_interface = ath9k_add_interface,
.remove_interface = ath9k_remove_interface,
.config = ath9k_config,
- .config_interface = ath9k_config_interface,
.configure_filter = ath9k_configure_filter,
.sta_notify = ath9k_sta_notify,
.conf_tx = ath9k_conf_tx,
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 8f3cf10f65c..ba06e78b2f5 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -17,7 +17,7 @@
#include "ath9k.h"
-static struct ath_rate_table ar5416_11na_ratetable = {
+static const struct ath_rate_table ar5416_11na_ratetable = {
42,
{
{ VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
@@ -155,7 +155,7 @@ static struct ath_rate_table ar5416_11na_ratetable = {
/* 4ms frame limit not used for NG mode. The values filled
* for HT are the 64K max aggregate limit */
-static struct ath_rate_table ar5416_11ng_ratetable = {
+static const struct ath_rate_table ar5416_11ng_ratetable = {
46,
{
{ VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
@@ -302,7 +302,7 @@ static struct ath_rate_table ar5416_11ng_ratetable = {
WLAN_RC_HT_FLAG, /* Phy rates allowed initially */
};
-static struct ath_rate_table ar5416_11a_ratetable = {
+static const struct ath_rate_table ar5416_11a_ratetable = {
8,
{
{ VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
@@ -335,7 +335,7 @@ static struct ath_rate_table ar5416_11a_ratetable = {
0, /* Phy rates allowed initially */
};
-static struct ath_rate_table ar5416_11g_ratetable = {
+static const struct ath_rate_table ar5416_11g_ratetable = {
12,
{
{ VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
@@ -380,7 +380,7 @@ static struct ath_rate_table ar5416_11g_ratetable = {
0, /* Phy rates allowed initially */
};
-static struct ath_rate_table ar5416_11b_ratetable = {
+static const struct ath_rate_table ar5416_11b_ratetable = {
4,
{
{ VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
@@ -420,7 +420,7 @@ static inline int8_t median(int8_t a, int8_t b, int8_t c)
}
}
-static void ath_rc_sort_validrates(struct ath_rate_table *rate_table,
+static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table,
struct ath_rate_priv *ath_rc_priv)
{
u8 i, j, idx, idx_next;
@@ -461,10 +461,11 @@ static inline int ath_rc_isvalid_txmask(struct ath_rate_priv *ath_rc_priv,
return ath_rc_priv->valid_rate_index[index];
}
-static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table,
- struct ath_rate_priv *ath_rc_priv,
- u8 cur_valid_txrate,
- u8 *next_idx)
+static inline
+int ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table,
+ struct ath_rate_priv *ath_rc_priv,
+ u8 cur_valid_txrate,
+ u8 *next_idx)
{
u8 i;
@@ -500,7 +501,7 @@ static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
}
static inline int
-ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table,
+ath_rc_get_nextlowervalid_txrate(const struct ath_rate_table *rate_table,
struct ath_rate_priv *ath_rc_priv,
u8 cur_valid_txrate, u8 *next_idx)
{
@@ -517,7 +518,7 @@ ath_rc_get_nextlowervalid_txrate(struct ath_rate_table *rate_table,
}
static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv,
- struct ath_rate_table *rate_table,
+ const struct ath_rate_table *rate_table,
u32 capflag)
{
u8 i, hi = 0;
@@ -547,7 +548,7 @@ static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv,
}
static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv,
- struct ath_rate_table *rate_table,
+ const struct ath_rate_table *rate_table,
struct ath_rateset *rateset,
u32 capflag)
{
@@ -592,7 +593,7 @@ static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv,
}
static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
- struct ath_rate_table *rate_table,
+ const struct ath_rate_table *rate_table,
u8 *mcs_set, u32 capflag)
{
struct ath_rateset *rateset = (struct ath_rateset *)mcs_set;
@@ -630,7 +631,7 @@ static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
struct ath_rate_priv *ath_rc_priv,
- struct ath_rate_table *rate_table,
+ const struct ath_rate_table *rate_table,
int *is_probing)
{
u32 dt, best_thruput, this_thruput, now_msec;
@@ -748,7 +749,7 @@ static u8 ath_rc_ratefind_ht(struct ath_softc *sc,
return rate;
}
-static void ath_rc_rate_set_series(struct ath_rate_table *rate_table,
+static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table,
struct ieee80211_tx_rate *rate,
struct ieee80211_tx_rate_control *txrc,
u8 tries, u8 rix, int rtsctsenable)
@@ -769,7 +770,7 @@ static void ath_rc_rate_set_series(struct ath_rate_table *rate_table,
}
static void ath_rc_rate_set_rtscts(struct ath_softc *sc,
- struct ath_rate_table *rate_table,
+ const struct ath_rate_table *rate_table,
struct ieee80211_tx_info *tx_info)
{
struct ieee80211_tx_rate *rates = tx_info->control.rates;
@@ -807,7 +808,7 @@ static void ath_rc_rate_set_rtscts(struct ath_softc *sc,
static u8 ath_rc_rate_getidx(struct ath_softc *sc,
struct ath_rate_priv *ath_rc_priv,
- struct ath_rate_table *rate_table,
+ const struct ath_rate_table *rate_table,
u8 rix, u16 stepdown,
u16 min_rate)
{
@@ -838,7 +839,7 @@ static void ath_rc_ratefind(struct ath_softc *sc,
struct ath_rate_priv *ath_rc_priv,
struct ieee80211_tx_rate_control *txrc)
{
- struct ath_rate_table *rate_table;
+ const struct ath_rate_table *rate_table;
struct sk_buff *skb = txrc->skb;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_tx_rate *rates = tx_info->control.rates;
@@ -937,7 +938,7 @@ static void ath_rc_ratefind(struct ath_softc *sc,
}
static bool ath_rc_update_per(struct ath_softc *sc,
- struct ath_rate_table *rate_table,
+ const struct ath_rate_table *rate_table,
struct ath_rate_priv *ath_rc_priv,
struct ath_tx_info_priv *tx_info_priv,
int tx_rate, int xretries, int retries,
@@ -1142,7 +1143,7 @@ static void ath_rc_update_ht(struct ath_softc *sc,
int rate;
u8 last_per;
bool state_change = false;
- struct ath_rate_table *rate_table = sc->cur_rate_table;
+ const struct ath_rate_table *rate_table = sc->cur_rate_table;
int size = ath_rc_priv->rate_table_size;
if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt))
@@ -1276,7 +1277,7 @@ static void ath_rc_update_ht(struct ath_softc *sc,
#undef CHK_RSSI
}
-static int ath_rc_get_rateindex(struct ath_rate_table *rate_table,
+static int ath_rc_get_rateindex(const struct ath_rate_table *rate_table,
struct ieee80211_tx_rate *rate)
{
int rix;
@@ -1300,7 +1301,7 @@ static void ath_rc_tx_status(struct ath_softc *sc,
int final_ts_idx, int xretries, int long_retry)
{
struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
- struct ath_rate_table *rate_table;
+ const struct ath_rate_table *rate_table;
struct ieee80211_tx_rate *rates = tx_info->status.rates;
u8 flags;
u32 i = 0, rix;
@@ -1354,9 +1355,11 @@ static void ath_rc_tx_status(struct ath_softc *sc,
xretries, long_retry);
}
-static struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
- enum ieee80211_band band,
- bool is_ht, bool is_cw_40)
+static const
+struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
+ enum ieee80211_band band,
+ bool is_ht,
+ bool is_cw_40)
{
int mode = 0;
@@ -1390,7 +1393,7 @@ static void ath_rc_init(struct ath_softc *sc,
struct ath_rate_priv *ath_rc_priv,
struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta,
- struct ath_rate_table *rate_table)
+ const struct ath_rate_table *rate_table)
{
struct ath_rateset *rateset = &ath_rc_priv->neg_rates;
u8 *ht_mcs = (u8 *)&ath_rc_priv->neg_ht_rates;
@@ -1568,12 +1571,13 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
struct ath_rate_priv *ath_rc_priv = priv_sta;
__le16 fc = hdr->frame_control;
- /* lowest rate for management and multicast/broadcast frames */
- if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) ||
- !sta) {
+ /* lowest rate for management and NO_ACK frames */
+ if (!ieee80211_is_data(fc) ||
+ tx_info->flags & IEEE80211_TX_CTL_NO_ACK || !sta) {
tx_info->control.rates[0].idx = rate_lowest_index(sband, sta);
tx_info->control.rates[0].count =
- is_multicast_ether_addr(hdr->addr1) ? 1 : ATH_MGT_TXMAXTRY;
+ (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) ?
+ 1 : ATH_MGT_TXMAXTRY;
return;
}
@@ -1586,7 +1590,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
{
struct ath_softc *sc = priv;
struct ath_rate_priv *ath_rc_priv = priv_sta;
- struct ath_rate_table *rate_table = NULL;
+ const struct ath_rate_table *rate_table = NULL;
bool is_cw40, is_sgi40;
int i, j = 0;
@@ -1635,7 +1639,7 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
{
struct ath_softc *sc = priv;
struct ath_rate_priv *ath_rc_priv = priv_sta;
- struct ath_rate_table *rate_table = NULL;
+ const struct ath_rate_table *rate_table = NULL;
bool oper_cw40 = false, oper_sgi40;
bool local_cw40 = (ath_rc_priv->ht_cap & WLAN_RC_40_FLAG) ?
true : false;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index faf2cab49ea..41c42824a5c 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -434,7 +434,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
struct ath_atx_tid *tid)
{
- struct ath_rate_table *rate_table = sc->cur_rate_table;
+ const struct ath_rate_table *rate_table = sc->cur_rate_table;
struct sk_buff *skb;
struct ieee80211_tx_info *tx_info;
struct ieee80211_tx_rate *rates;
@@ -497,7 +497,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
struct ath_buf *bf, u16 frmlen)
{
- struct ath_rate_table *rt = sc->cur_rate_table;
+ const struct ath_rate_table *rt = sc->cur_rate_table;
struct sk_buff *skb = bf->bf_mpdu;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
u32 nsymbits, nsymbols, mpdudensity;
@@ -971,7 +971,7 @@ int ath_cabq_update(struct ath_softc *sc)
else if (sc->config.cabqReadytime > ATH9K_READY_TIME_HI_BOUND)
sc->config.cabqReadytime = ATH9K_READY_TIME_HI_BOUND;
- qi.tqi_readyTime = (sc->hw->conf.beacon_int *
+ qi.tqi_readyTime = (sc->beacon_interval *
sc->config.cabqReadytime) / 100;
ath_txq_update(sc, qnum, &qi);
@@ -1407,7 +1407,7 @@ static int setup_tx_flags(struct ath_softc *sc, struct sk_buff *skb,
static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf,
int width, int half_gi, bool shortPreamble)
{
- struct ath_rate_table *rate_table = sc->cur_rate_table;
+ const struct ath_rate_table *rate_table = sc->cur_rate_table;
u32 nbits, nsymbits, duration, nsymbols;
u8 rc;
int streams, pktlen;
@@ -1439,7 +1439,7 @@ static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf,
static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
{
- struct ath_rate_table *rt = sc->cur_rate_table;
+ const struct ath_rate_table *rt = sc->cur_rate_table;
struct ath9k_11n_rate_series series[4];
struct sk_buff *skb;
struct ieee80211_tx_info *tx_info;
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 77406245dc7..ddaa859c349 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -279,7 +279,7 @@ static int atmel_config(struct pcmcia_device *link)
struct pcmcia_device_id *did;
dev = link->priv;
- did = handle_to_dev(link).driver_data;
+ did = dev_get_drvdata(&handle_to_dev(link));
DEBUG(0, "atmel_config(0x%p)\n", link);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index a97c6ff0f12..2615aaf7df6 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3468,11 +3468,6 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
if (phy->ops->set_rx_antenna)
phy->ops->set_rx_antenna(dev, antenna);
- /* Update templates for AP/mesh mode. */
- if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
- b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
- b43_set_beacon_int(dev, conf->beacon_int);
-
if (!!conf->radio_enabled != phy->radio_on) {
if (conf->radio_enabled) {
b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
@@ -3548,14 +3543,47 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev;
+ unsigned long flags;
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (!dev || b43_status(dev) < B43_STAT_STARTED)
goto out_unlock_mutex;
+
+ B43_WARN_ON(wl->vif != vif);
+
+ if (changed & BSS_CHANGED_BSSID) {
+ spin_lock_irqsave(&wl->irq_lock, flags);
+ if (conf->bssid)
+ memcpy(wl->bssid, conf->bssid, ETH_ALEN);
+ else
+ memset(wl->bssid, 0, ETH_ALEN);
+
+ if (b43_status(dev) >= B43_STAT_INITIALIZED) {
+ if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) {
+ B43_WARN_ON(vif->type != wl->if_type);
+ if (changed & BSS_CHANGED_BEACON)
+ b43_update_templates(wl);
+ } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) {
+ if (changed & BSS_CHANGED_BEACON)
+ b43_update_templates(wl);
+ }
+ b43_write_mac_bssid_templates(dev);
+ }
+ spin_unlock_irqrestore(&wl->irq_lock, flags);
+ }
+
b43_mac_suspend(dev);
+ /* Update templates for AP/mesh mode. */
+ if (changed & BSS_CHANGED_BEACON_INT &&
+ (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) ||
+ b43_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+ b43_set_beacon_int(dev, conf->beacon_int);
+
if (changed & BSS_CHANGED_BASIC_RATES)
b43_update_basic_rates(dev, conf->basic_rates);
@@ -3569,8 +3597,6 @@ static void b43_op_bss_info_changed(struct ieee80211_hw *hw,
b43_mac_enable(dev);
out_unlock_mutex:
mutex_unlock(&wl->mutex);
-
- return;
}
static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -3728,41 +3754,6 @@ static void b43_op_configure_filter(struct ieee80211_hw *hw,
spin_unlock_irqrestore(&wl->irq_lock, flags);
}
-static int b43_op_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct b43_wl *wl = hw_to_b43_wl(hw);
- struct b43_wldev *dev = wl->current_dev;
- unsigned long flags;
-
- if (!dev)
- return -ENODEV;
- mutex_lock(&wl->mutex);
- spin_lock_irqsave(&wl->irq_lock, flags);
- B43_WARN_ON(wl->vif != vif);
- if (conf->bssid)
- memcpy(wl->bssid, conf->bssid, ETH_ALEN);
- else
- memset(wl->bssid, 0, ETH_ALEN);
- if (b43_status(dev) >= B43_STAT_INITIALIZED) {
- if (b43_is_mode(wl, NL80211_IFTYPE_AP) ||
- b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) {
- B43_WARN_ON(vif->type != wl->if_type);
- if (conf->changed & IEEE80211_IFCC_BEACON)
- b43_update_templates(wl);
- } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) {
- if (conf->changed & IEEE80211_IFCC_BEACON)
- b43_update_templates(wl);
- }
- b43_write_mac_bssid_templates(dev);
- }
- spin_unlock_irqrestore(&wl->irq_lock, flags);
- mutex_unlock(&wl->mutex);
-
- return 0;
-}
-
/* Locking: wl->mutex */
static void b43_wireless_core_stop(struct b43_wldev *dev)
{
@@ -4432,7 +4423,6 @@ static const struct ieee80211_ops b43_hw_ops = {
.remove_interface = b43_op_remove_interface,
.config = b43_op_config,
.bss_info_changed = b43_op_bss_info_changed,
- .config_interface = b43_op_config_interface,
.configure_filter = b43_op_configure_filter,
.set_key = b43_op_set_key,
.get_stats = b43_op_get_stats,
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index ee202b4f77b..07c7898c87a 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2721,11 +2721,6 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
/* Antennas for RX and management frame TX. */
b43legacy_mgmtframe_txantenna(dev, antenna_tx);
- /* Update templates for AP mode. */
- if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP))
- b43legacy_set_beacon_int(dev, conf->beacon_int);
-
-
if (!!conf->radio_enabled != phy->radio_on) {
if (conf->radio_enabled) {
b43legacy_radio_turn_on(dev);
@@ -2809,6 +2804,7 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw,
u32 savedirqs;
mutex_lock(&wl->mutex);
+ B43legacy_WARN_ON(wl->vif != vif);
dev = wl->current_dev;
phy = &dev->phy;
@@ -2822,11 +2818,37 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw,
goto out_unlock_mutex;
}
savedirqs = b43legacy_interrupt_disable(dev, B43legacy_IRQ_ALL);
- spin_unlock_irqrestore(&wl->irq_lock, flags);
- b43legacy_synchronize_irq(dev);
+
+ if (changed & BSS_CHANGED_BSSID) {
+ spin_unlock_irqrestore(&wl->irq_lock, flags);
+ b43legacy_synchronize_irq(dev);
+
+ if (conf->bssid)
+ memcpy(wl->bssid, conf->bssid, ETH_ALEN);
+ else
+ memset(wl->bssid, 0, ETH_ALEN);
+
+ if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) {
+ if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) {
+ B43legacy_WARN_ON(vif->type != NL80211_IFTYPE_AP);
+ if (changed & BSS_CHANGED_BEACON)
+ b43legacy_update_templates(wl);
+ } else if (b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)) {
+ if (changed & BSS_CHANGED_BEACON)
+ b43legacy_update_templates(wl);
+ }
+ b43legacy_write_mac_bssid_templates(dev);
+ }
+ spin_unlock_irqrestore(&wl->irq_lock, flags);
+ }
b43legacy_mac_suspend(dev);
+ if (changed & BSS_CHANGED_BEACON_INT &&
+ (b43legacy_is_mode(wl, NL80211_IFTYPE_AP) ||
+ b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)))
+ b43legacy_set_beacon_int(dev, conf->beacon_int);
+
if (changed & BSS_CHANGED_BASIC_RATES)
b43legacy_update_basic_rates(dev, conf->basic_rates);
@@ -2846,8 +2868,6 @@ static void b43legacy_op_bss_info_changed(struct ieee80211_hw *hw,
spin_unlock_irqrestore(&wl->irq_lock, flags);
out_unlock_mutex:
mutex_unlock(&wl->mutex);
-
- return;
}
static void b43legacy_op_configure_filter(struct ieee80211_hw *hw,
@@ -2889,40 +2909,6 @@ static void b43legacy_op_configure_filter(struct ieee80211_hw *hw,
spin_unlock_irqrestore(&wl->irq_lock, flags);
}
-static int b43legacy_op_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
- struct b43legacy_wldev *dev = wl->current_dev;
- unsigned long flags;
-
- if (!dev)
- return -ENODEV;
- mutex_lock(&wl->mutex);
- spin_lock_irqsave(&wl->irq_lock, flags);
- B43legacy_WARN_ON(wl->vif != vif);
- if (conf->bssid)
- memcpy(wl->bssid, conf->bssid, ETH_ALEN);
- else
- memset(wl->bssid, 0, ETH_ALEN);
- if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) {
- if (b43legacy_is_mode(wl, NL80211_IFTYPE_AP)) {
- B43legacy_WARN_ON(vif->type != NL80211_IFTYPE_AP);
- if (conf->changed & IEEE80211_IFCC_BEACON)
- b43legacy_update_templates(wl);
- } else if (b43legacy_is_mode(wl, NL80211_IFTYPE_ADHOC)) {
- if (conf->changed & IEEE80211_IFCC_BEACON)
- b43legacy_update_templates(wl);
- }
- b43legacy_write_mac_bssid_templates(dev);
- }
- spin_unlock_irqrestore(&wl->irq_lock, flags);
- mutex_unlock(&wl->mutex);
-
- return 0;
-}
-
/* Locking: wl->mutex */
static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev)
{
@@ -3563,7 +3549,6 @@ static const struct ieee80211_ops b43legacy_hw_ops = {
.remove_interface = b43legacy_op_remove_interface,
.config = b43legacy_op_dev_config,
.bss_info_changed = b43legacy_op_bss_info_changed,
- .config_interface = b43legacy_op_config_interface,
.configure_filter = b43legacy_op_configure_filter,
.get_stats = b43legacy_op_get_stats,
.get_tx_stats = b43legacy_op_get_tx_stats,
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 97e5647ff05..742432388ca 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -3488,7 +3488,7 @@ static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
char *buf)
{
- struct ipw2100_priv *p = d->driver_data;
+ struct ipw2100_priv *p = dev_get_drvdata(d);
return sprintf(buf, "0x%08x\n", (int)p->config);
}
@@ -3497,7 +3497,7 @@ static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
static ssize_t show_status(struct device *d, struct device_attribute *attr,
char *buf)
{
- struct ipw2100_priv *p = d->driver_data;
+ struct ipw2100_priv *p = dev_get_drvdata(d);
return sprintf(buf, "0x%08x\n", (int)p->status);
}
@@ -3506,7 +3506,7 @@ static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
static ssize_t show_capability(struct device *d, struct device_attribute *attr,
char *buf)
{
- struct ipw2100_priv *p = d->driver_data;
+ struct ipw2100_priv *p = dev_get_drvdata(d);
return sprintf(buf, "0x%08x\n", (int)p->capability);
}
@@ -4224,7 +4224,7 @@ static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
1 - SW based RF kill active (sysfs)
2 - HW based RF kill active
3 - Both HW and SW baed RF kill active */
- struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data;
+ struct ipw2100_priv *priv = dev_get_drvdata(d);
int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
(rf_kill_active(priv) ? 0x2 : 0x0);
return sprintf(buf, "%i\n", val);
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 9a123fbcc35..c3b3dfe43d1 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -1527,7 +1527,7 @@ static DEVICE_ATTR(led, S_IWUSR | S_IRUGO, show_led, store_led);
static ssize_t show_status(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct ipw_priv *p = d->driver_data;
+ struct ipw_priv *p = dev_get_drvdata(d);
return sprintf(buf, "0x%08x\n", (int)p->status);
}
@@ -1536,7 +1536,7 @@ static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
char *buf)
{
- struct ipw_priv *p = d->driver_data;
+ struct ipw_priv *p = dev_get_drvdata(d);
return sprintf(buf, "0x%08x\n", (int)p->config);
}
@@ -1545,7 +1545,7 @@ static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
static ssize_t show_nic_type(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct ipw_priv *priv = d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "TYPE: %d\n", priv->nic_type);
}
@@ -1555,7 +1555,7 @@ static ssize_t show_ucode_version(struct device *d,
struct device_attribute *attr, char *buf)
{
u32 len = sizeof(u32), tmp = 0;
- struct ipw_priv *p = d->driver_data;
+ struct ipw_priv *p = dev_get_drvdata(d);
if (ipw_get_ordinal(p, IPW_ORD_STAT_UCODE_VERSION, &tmp, &len))
return 0;
@@ -1569,7 +1569,7 @@ static ssize_t show_rtc(struct device *d, struct device_attribute *attr,
char *buf)
{
u32 len = sizeof(u32), tmp = 0;
- struct ipw_priv *p = d->driver_data;
+ struct ipw_priv *p = dev_get_drvdata(d);
if (ipw_get_ordinal(p, IPW_ORD_STAT_RTC, &tmp, &len))
return 0;
@@ -1586,14 +1586,15 @@ static DEVICE_ATTR(rtc, S_IWUSR | S_IRUGO, show_rtc, NULL);
static ssize_t show_eeprom_delay(struct device *d,
struct device_attribute *attr, char *buf)
{
- int n = ((struct ipw_priv *)d->driver_data)->eeprom_delay;
+ struct ipw_priv *p = dev_get_drvdata(d);
+ int n = p->eeprom_delay;
return sprintf(buf, "%i\n", n);
}
static ssize_t store_eeprom_delay(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct ipw_priv *p = d->driver_data;
+ struct ipw_priv *p = dev_get_drvdata(d);
sscanf(buf, "%i", &p->eeprom_delay);
return strnlen(buf, count);
}
@@ -1605,7 +1606,7 @@ static ssize_t show_command_event_reg(struct device *d,
struct device_attribute *attr, char *buf)
{
u32 reg = 0;
- struct ipw_priv *p = d->driver_data;
+ struct ipw_priv *p = dev_get_drvdata(d);
reg = ipw_read_reg32(p, IPW_INTERNAL_CMD_EVENT);
return sprintf(buf, "0x%08x\n", reg);
@@ -1615,7 +1616,7 @@ static ssize_t store_command_event_reg(struct device *d,
const char *buf, size_t count)
{
u32 reg;
- struct ipw_priv *p = d->driver_data;
+ struct ipw_priv *p = dev_get_drvdata(d);
sscanf(buf, "%x", &reg);
ipw_write_reg32(p, IPW_INTERNAL_CMD_EVENT, reg);
@@ -1629,7 +1630,7 @@ static ssize_t show_mem_gpio_reg(struct device *d,
struct device_attribute *attr, char *buf)
{
u32 reg = 0;
- struct ipw_priv *p = d->driver_data;
+ struct ipw_priv *p = dev_get_drvdata(d);
reg = ipw_read_reg32(p, 0x301100);
return sprintf(buf, "0x%08x\n", reg);
@@ -1639,7 +1640,7 @@ static ssize_t store_mem_gpio_reg(struct device *d,
const char *buf, size_t count)
{
u32 reg;
- struct ipw_priv *p = d->driver_data;
+ struct ipw_priv *p = dev_get_drvdata(d);
sscanf(buf, "%x", &reg);
ipw_write_reg32(p, 0x301100, reg);
@@ -1653,7 +1654,7 @@ static ssize_t show_indirect_dword(struct device *d,
struct device_attribute *attr, char *buf)
{
u32 reg = 0;
- struct ipw_priv *priv = d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
if (priv->status & STATUS_INDIRECT_DWORD)
reg = ipw_read_reg32(priv, priv->indirect_dword);
@@ -1666,7 +1667,7 @@ static ssize_t store_indirect_dword(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct ipw_priv *priv = d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
sscanf(buf, "%x", &priv->indirect_dword);
priv->status |= STATUS_INDIRECT_DWORD;
@@ -1680,7 +1681,7 @@ static ssize_t show_indirect_byte(struct device *d,
struct device_attribute *attr, char *buf)
{
u8 reg = 0;
- struct ipw_priv *priv = d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
if (priv->status & STATUS_INDIRECT_BYTE)
reg = ipw_read_reg8(priv, priv->indirect_byte);
@@ -1693,7 +1694,7 @@ static ssize_t store_indirect_byte(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct ipw_priv *priv = d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
sscanf(buf, "%x", &priv->indirect_byte);
priv->status |= STATUS_INDIRECT_BYTE;
@@ -1707,7 +1708,7 @@ static ssize_t show_direct_dword(struct device *d,
struct device_attribute *attr, char *buf)
{
u32 reg = 0;
- struct ipw_priv *priv = d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
if (priv->status & STATUS_DIRECT_DWORD)
reg = ipw_read32(priv, priv->direct_dword);
@@ -1720,7 +1721,7 @@ static ssize_t store_direct_dword(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct ipw_priv *priv = d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
sscanf(buf, "%x", &priv->direct_dword);
priv->status |= STATUS_DIRECT_DWORD;
@@ -1747,7 +1748,7 @@ static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
1 - SW based RF kill active (sysfs)
2 - HW based RF kill active
3 - Both HW and SW baed RF kill active */
- struct ipw_priv *priv = d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
(rf_kill_active(priv) ? 0x2 : 0x0);
return sprintf(buf, "%i\n", val);
@@ -1791,7 +1792,7 @@ static int ipw_radio_kill_sw(struct ipw_priv *priv, int disable_radio)
static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct ipw_priv *priv = d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
ipw_radio_kill_sw(priv, buf[0] == '1');
@@ -1803,7 +1804,7 @@ static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
static ssize_t show_speed_scan(struct device *d, struct device_attribute *attr,
char *buf)
{
- struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
int pos = 0, len = 0;
if (priv->config & CFG_SPEED_SCAN) {
while (priv->speed_scan[pos] != 0)
@@ -1818,7 +1819,7 @@ static ssize_t show_speed_scan(struct device *d, struct device_attribute *attr,
static ssize_t store_speed_scan(struct device *d, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
int channel, pos = 0;
const char *p = buf;
@@ -1857,14 +1858,14 @@ static DEVICE_ATTR(speed_scan, S_IWUSR | S_IRUGO, show_speed_scan,
static ssize_t show_net_stats(struct device *d, struct device_attribute *attr,
char *buf)
{
- struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "%c\n", (priv->config & CFG_NET_STATS) ? '1' : '0');
}
static ssize_t store_net_stats(struct device *d, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct ipw_priv *priv = (struct ipw_priv *)d->driver_data;
+ struct ipw_priv *priv = dev_get_drvdata(d);
if (buf[0] == '1')
priv->config |= CFG_NET_STATS;
else
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index f63a9c5ba26..814afaf6d10 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -683,11 +683,10 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
if (sta)
rate_mask = sta->supp_rates[sband->band];
- /* Send management frames and broadcast/multicast data using lowest
- * rate. */
+ /* Send management frames and NO_ACK data using lowest rate. */
fc = le16_to_cpu(hdr->frame_control);
if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
- is_multicast_ether_addr(hdr->addr1) ||
+ info->flags & IEEE80211_TX_CTL_NO_ACK ||
!sta || !priv_sta) {
IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n");
if (!rate_mask)
@@ -696,6 +695,8 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
else
info->control.rates[0].idx =
rate_lowest_index(sband, sta);
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ info->control.rates[0].count = 1;
return;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 3504279c758..0a71bb55d0e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -172,7 +172,7 @@ struct iwl_lq_sta {
};
static void rs_rate_scale_perform(struct iwl_priv *priv,
- struct ieee80211_hdr *hdr,
+ struct sk_buff *skb,
struct ieee80211_sta *sta,
struct iwl_lq_sta *lq_sta);
static void rs_fill_link_cmd(const struct iwl_priv *priv,
@@ -829,7 +829,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
if (!ieee80211_is_data(hdr->frame_control) ||
- is_multicast_ether_addr(hdr->addr1))
+ info->flags & IEEE80211_TX_CTL_NO_ACK)
return;
/* This packet was aggregated but doesn't carry rate scale info */
@@ -995,7 +995,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
/* See if there's a better rate or modulation mode to try. */
if (sta && sta->supp_rates[sband->band])
- rs_rate_scale_perform(priv, hdr, sta, lq_sta);
+ rs_rate_scale_perform(priv, skb, sta, lq_sta);
out:
return;
}
@@ -1207,8 +1207,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv,
tbl->action = 0;
rate_mask = lq_sta->active_mimo2_rate;
- if (priv->current_ht_config.supported_chan_width
- == IWL_CHANNEL_WIDTH_40MHZ)
+ if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
tbl->is_fat = 1;
else
tbl->is_fat = 0;
@@ -1273,8 +1272,7 @@ static int rs_switch_to_mimo3(struct iwl_priv *priv,
tbl->action = 0;
rate_mask = lq_sta->active_mimo3_rate;
- if (priv->current_ht_config.supported_chan_width
- == IWL_CHANNEL_WIDTH_40MHZ)
+ if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
tbl->is_fat = 1;
else
tbl->is_fat = 0;
@@ -1332,8 +1330,7 @@ static int rs_switch_to_siso(struct iwl_priv *priv,
tbl->action = 0;
rate_mask = lq_sta->active_siso_rate;
- if (priv->current_ht_config.supported_chan_width
- == IWL_CHANNEL_WIDTH_40MHZ)
+ if (iwl_is_fat_tx_allowed(priv, &sta->ht_cap))
tbl->is_fat = 1;
else
tbl->is_fat = 0;
@@ -1975,12 +1972,14 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta)
* Do rate scaling and search for new modulation mode.
*/
static void rs_rate_scale_perform(struct iwl_priv *priv,
- struct ieee80211_hdr *hdr,
+ struct sk_buff *skb,
struct ieee80211_sta *sta,
struct iwl_lq_sta *lq_sta)
{
struct ieee80211_hw *hw = priv->hw;
struct ieee80211_conf *conf = &hw->conf;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
int low = IWL_RATE_INVALID;
int high = IWL_RATE_INVALID;
int index;
@@ -2006,11 +2005,10 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n");
- /* Send management frames and broadcast/multicast data using
- * lowest rate. */
+ /* Send management frames and NO_ACK data using lowest rate. */
/* TODO: this could probably be improved.. */
if (!ieee80211_is_data(hdr->frame_control) ||
- is_multicast_ether_addr(hdr->addr1))
+ info->flags & IEEE80211_TX_CTL_NO_ACK)
return;
if (!sta || !lq_sta)
@@ -2450,16 +2448,17 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
if (sta)
mask_bit = sta->supp_rates[sband->band];
- /* Send management frames and broadcast/multicast data using lowest
- * rate. */
+ /* Send management frames and NO_ACK data using lowest rate. */
if (!ieee80211_is_data(hdr->frame_control) ||
- is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
+ info->flags & IEEE80211_TX_CTL_NO_ACK || !sta || !lq_sta) {
if (!mask_bit)
info->control.rates[0].idx =
rate_lowest_index(sband, NULL);
else
info->control.rates[0].idx =
rate_lowest_index(sband, sta);
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ info->control.rates[0].count = 1;
return;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 277dfc57fde..6cdee0b4b48 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -567,7 +567,8 @@ static void iwl_setup_rxon_timing(struct iwl_priv *priv)
beacon_int = iwl_adjust_beacon_interval(priv->beacon_int);
priv->rxon_timing.atim_window = 0;
} else {
- beacon_int = iwl_adjust_beacon_interval(conf->beacon_int);
+ beacon_int = iwl_adjust_beacon_interval(
+ priv->vif->bss_conf.beacon_int);
/* TODO: we need to get atim_window from upper stack
* for now we set to 0 */
@@ -2267,7 +2268,7 @@ static int iwl_mac_get_stats(struct ieee80211_hw *hw,
static ssize_t show_debug_level(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "0x%08X\n", priv->debug_level);
}
@@ -2275,7 +2276,7 @@ static ssize_t store_debug_level(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct iwl_priv *priv = d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
unsigned long val;
int ret;
@@ -2298,7 +2299,7 @@ static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
static ssize_t show_version(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
struct iwl_alive_resp *palive = &priv->card_alive;
ssize_t pos = 0;
u16 eeprom_ver;
@@ -2329,7 +2330,7 @@ static DEVICE_ATTR(version, S_IWUSR | S_IRUGO, show_version, NULL);
static ssize_t show_temperature(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
if (!iwl_is_alive(priv))
return -EAGAIN;
@@ -2342,7 +2343,7 @@ static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
static ssize_t show_tx_power(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
if (!iwl_is_ready_rf(priv))
return sprintf(buf, "off\n");
@@ -2354,7 +2355,7 @@ static ssize_t store_tx_power(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
unsigned long val;
int ret;
@@ -2372,7 +2373,7 @@ static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
static ssize_t show_flags(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
}
@@ -2381,7 +2382,7 @@ static ssize_t store_flags(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
unsigned long val;
u32 flags;
int ret = strict_strtoul(buf, 0, &val);
@@ -2410,7 +2411,7 @@ static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
static ssize_t show_filter_flags(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "0x%04X\n",
le32_to_cpu(priv->active_rxon.filter_flags));
@@ -2420,7 +2421,7 @@ static ssize_t store_filter_flags(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
unsigned long val;
u32 filter_flags;
int ret = strict_strtoul(buf, 0, &val);
@@ -2622,7 +2623,6 @@ static struct ieee80211_ops iwl_hw_ops = {
.add_interface = iwl_mac_add_interface,
.remove_interface = iwl_mac_remove_interface,
.config = iwl_mac_config,
- .config_interface = iwl_mac_config_interface,
.configure_filter = iwl_configure_filter,
.set_key = iwl_mac_set_key,
.update_tkip_key = iwl_mac_update_tkip_key,
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 3dec2d25fa3..1366222bb50 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1298,8 +1298,7 @@ int iwl_setup_mac(struct iwl_priv *priv)
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM |
IEEE80211_HW_AMPDU_AGGREGATION |
- IEEE80211_HW_SPECTRUM_MGMT |
- IEEE80211_HW_SUPPORTS_PS;
+ IEEE80211_HW_SPECTRUM_MGMT;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
@@ -1313,7 +1312,6 @@ int iwl_setup_mac(struct iwl_priv *priv)
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
- hw->conf.beacon_int = 100;
hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
@@ -2239,15 +2237,69 @@ static void iwl_ht_conf(struct iwl_priv *priv,
#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
void iwl_bss_info_changed(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *bss_conf,
- u32 changes)
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changes)
{
struct iwl_priv *priv = hw->priv;
int ret;
IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
+ if (!iwl_is_alive(priv))
+ return;
+
+ mutex_lock(&priv->mutex);
+
+ if (changes & BSS_CHANGED_BEACON &&
+ priv->iw_mode == NL80211_IFTYPE_AP) {
+ dev_kfree_skb(priv->ibss_beacon);
+ priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
+ }
+
+ if ((changes & BSS_CHANGED_BSSID) && !iwl_is_rfkill(priv)) {
+ /* If there is currently a HW scan going on in the background
+ * then we need to cancel it else the RXON below will fail. */
+ if (iwl_scan_cancel_timeout(priv, 100)) {
+ IWL_WARN(priv, "Aborted scan still in progress "
+ "after 100ms\n");
+ IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
+ mutex_unlock(&priv->mutex);
+ return;
+ }
+ memcpy(priv->staging_rxon.bssid_addr,
+ bss_conf->bssid, ETH_ALEN);
+
+ /* TODO: Audit driver for usage of these members and see
+ * if mac80211 deprecates them (priv->bssid looks like it
+ * shouldn't be there, but I haven't scanned the IBSS code
+ * to verify) - jpk */
+ memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+
+ if (priv->iw_mode == NL80211_IFTYPE_AP)
+ iwlcore_config_ap(priv);
+ else {
+ int rc = iwlcore_commit_rxon(priv);
+ if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
+ iwl_rxon_add_station(
+ priv, priv->active_rxon.bssid_addr, 1);
+ }
+ } else if (!iwl_is_rfkill(priv)) {
+ iwl_scan_cancel_timeout(priv, 100);
+ priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ iwlcore_commit_rxon(priv);
+ }
+
+ if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+ changes & BSS_CHANGED_BEACON) {
+ struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+ if (beacon)
+ iwl_mac_beacon_update(hw, beacon);
+ }
+
+ mutex_unlock(&priv->mutex);
+
if (changes & BSS_CHANGED_ERP_PREAMBLE) {
IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
bss_conf->use_short_preamble);
@@ -2306,7 +2358,7 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
&priv->staging_rxon,
sizeof(struct iwl_rxon_cmd));
}
-
+ IWL_DEBUG_MAC80211(priv, "leave\n");
}
EXPORT_SYMBOL(iwl_bss_info_changed);
@@ -2590,106 +2642,6 @@ out:
}
EXPORT_SYMBOL(iwl_mac_config);
-int iwl_mac_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct iwl_priv *priv = hw->priv;
- int rc;
-
- if (conf == NULL)
- return -EIO;
-
- if (priv->vif != vif) {
- IWL_DEBUG_MAC80211(priv, "leave - priv->vif != vif\n");
- return 0;
- }
-
- if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
- conf->changed & IEEE80211_IFCC_BEACON) {
- struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
- if (!beacon)
- return -ENOMEM;
- mutex_lock(&priv->mutex);
- rc = iwl_mac_beacon_update(hw, beacon);
- mutex_unlock(&priv->mutex);
- if (rc)
- return rc;
- }
-
- if (!iwl_is_alive(priv))
- return -EAGAIN;
-
- mutex_lock(&priv->mutex);
-
- if (conf->bssid)
- IWL_DEBUG_MAC80211(priv, "bssid: %pM\n", conf->bssid);
-
-/*
- * very dubious code was here; the probe filtering flag is never set:
- *
- if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
- !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
- */
-
- if (priv->iw_mode == NL80211_IFTYPE_AP) {
- if (!conf->bssid) {
- conf->bssid = priv->mac_addr;
- memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
- IWL_DEBUG_MAC80211(priv, "bssid was set to: %pM\n",
- conf->bssid);
- }
- if (priv->ibss_beacon)
- dev_kfree_skb(priv->ibss_beacon);
-
- priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
- }
-
- if (iwl_is_rfkill(priv))
- goto done;
-
- if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
- !is_multicast_ether_addr(conf->bssid)) {
- /* If there is currently a HW scan going on in the background
- * then we need to cancel it else the RXON below will fail. */
- if (iwl_scan_cancel_timeout(priv, 100)) {
- IWL_WARN(priv, "Aborted scan still in progress "
- "after 100ms\n");
- IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
- mutex_unlock(&priv->mutex);
- return -EAGAIN;
- }
- memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
-
- /* TODO: Audit driver for usage of these members and see
- * if mac80211 deprecates them (priv->bssid looks like it
- * shouldn't be there, but I haven't scanned the IBSS code
- * to verify) - jpk */
- memcpy(priv->bssid, conf->bssid, ETH_ALEN);
-
- if (priv->iw_mode == NL80211_IFTYPE_AP)
- iwlcore_config_ap(priv);
- else {
- rc = iwlcore_commit_rxon(priv);
- if ((priv->iw_mode == NL80211_IFTYPE_STATION) && rc)
- iwl_rxon_add_station(
- priv, priv->active_rxon.bssid_addr, 1);
- }
-
- } else {
- iwl_scan_cancel_timeout(priv, 100);
- priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- iwlcore_commit_rxon(priv);
- }
-
- done:
- IWL_DEBUG_MAC80211(priv, "leave\n");
- mutex_unlock(&priv->mutex);
-
- return 0;
-}
-EXPORT_SYMBOL(iwl_mac_config_interface);
-
int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
struct ieee80211_tx_queue_stats *stats)
{
@@ -2751,7 +2703,7 @@ void iwl_mac_reset_tsf(struct ieee80211_hw *hw)
priv->ibss_beacon = NULL;
- priv->beacon_int = priv->hw->conf.beacon_int;
+ priv->beacon_int = priv->vif->bss_conf.beacon_int;
priv->timestamp = 0;
if ((priv->iw_mode == NL80211_IFTYPE_STATION))
priv->beacon_int = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index d4c60afa289..bd7f9d9616b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -281,9 +281,6 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
int iwl_mac_config(struct ieee80211_hw *hw, u32 changed);
void iwl_config_ap(struct iwl_priv *priv);
-int iwl_mac_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf);
int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
struct ieee80211_tx_queue_stats *stats);
void iwl_mac_reset_tsf(struct ieee80211_hw *hw);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 0072ea2c536..0eb939c40ac 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -490,7 +490,7 @@ void iwl_clear_stations_table(struct iwl_priv *priv)
/* keep track of static keys */
for (i = 0; i < WEP_KEYS_MAX ; i++) {
if (priv->wep_keys[i].key_size)
- test_and_set_bit(i, &priv->ucode_key_table);
+ set_bit(i, &priv->ucode_key_table);
}
spin_unlock_irqrestore(&priv->sta_lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 6b42ea2a1f1..f6c1489a0c4 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -551,7 +551,8 @@ static void iwl3945_setup_rxon_timing(struct iwl_priv *priv)
priv->rxon_timing.atim_window = 0;
} else {
priv->rxon_timing.beacon_interval =
- iwl3945_adjust_beacon_interval(conf->beacon_int);
+ iwl3945_adjust_beacon_interval(
+ priv->vif->bss_conf.beacon_int);
/* TODO: we need to get atim_window from upper stack
* for now we set to 0 */
priv->rxon_timing.atim_window = 0;
@@ -1343,15 +1344,24 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv)
struct list_head *element;
struct iwl_rx_mem_buffer *rxb;
unsigned long flags;
- spin_lock_irqsave(&rxq->lock, flags);
- while (!list_empty(&rxq->rx_used)) {
+
+ while (1) {
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ return;
+ }
+
element = rxq->rx_used.next;
rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+ list_del(element);
+ spin_unlock_irqrestore(&rxq->lock, flags);
/* Alloc a new receive buffer */
rxb->skb =
alloc_skb(priv->hw_params.rx_buf_size,
- __GFP_NOWARN | GFP_ATOMIC);
+ GFP_KERNEL);
if (!rxb->skb) {
if (net_ratelimit())
IWL_CRIT(priv, ": Can not allocate SKB buffers\n");
@@ -1369,18 +1379,18 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv)
*/
skb_reserve(rxb->skb, 4);
- priv->alloc_rxb_skb++;
- list_del(element);
-
/* Get physical address of RB/SKB */
rxb->real_dma_addr = pci_map_single(priv->pci_dev,
rxb->skb->data,
priv->hw_params.rx_buf_size,
PCI_DMA_FROMDEVICE);
+
+ spin_lock_irqsave(&rxq->lock, flags);
list_add_tail(&rxb->list, &rxq->rx_free);
+ priv->alloc_rxb_skb++;
rxq->free_count++;
+ spin_unlock_irqrestore(&rxq->lock, flags);
}
- spin_unlock_irqrestore(&rxq->lock, flags);
}
void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
@@ -1413,18 +1423,6 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
spin_unlock_irqrestore(&rxq->lock, flags);
}
-/*
- * this should be called while priv->lock is locked
- */
-static void __iwl3945_rx_replenish(void *data)
-{
- struct iwl_priv *priv = data;
-
- iwl3945_rx_allocate(priv);
- iwl3945_rx_queue_restock(priv);
-}
-
-
void iwl3945_rx_replenish(void *data)
{
struct iwl_priv *priv = data;
@@ -1642,7 +1640,7 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
count++;
if (count >= 8) {
priv->rxq.read = i;
- __iwl3945_rx_replenish(priv);
+ iwl3945_rx_queue_restock(priv);
count = 0;
}
}
@@ -3596,7 +3594,7 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
static ssize_t show_debug_level(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "0x%08X\n", priv->debug_level);
}
@@ -3604,7 +3602,7 @@ static ssize_t store_debug_level(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct iwl_priv *priv = d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
unsigned long val;
int ret;
@@ -3625,7 +3623,7 @@ static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
static ssize_t show_temperature(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
if (!iwl_is_alive(priv))
return -EAGAIN;
@@ -3638,7 +3636,7 @@ static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
static ssize_t show_tx_power(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
}
@@ -3646,7 +3644,7 @@ static ssize_t store_tx_power(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
char *p = (char *)buf;
u32 val;
@@ -3664,7 +3662,7 @@ static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
static ssize_t show_flags(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
}
@@ -3673,7 +3671,7 @@ static ssize_t store_flags(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
u32 flags = simple_strtoul(buf, NULL, 0);
mutex_lock(&priv->mutex);
@@ -3698,7 +3696,7 @@ static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
static ssize_t show_filter_flags(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "0x%04X\n",
le32_to_cpu(priv->active_rxon.filter_flags));
@@ -3708,7 +3706,7 @@ static ssize_t store_filter_flags(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
u32 filter_flags = simple_strtoul(buf, NULL, 0);
mutex_lock(&priv->mutex);
@@ -3993,7 +3991,7 @@ static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna);
static ssize_t show_status(struct device *d,
struct device_attribute *attr, char *buf)
{
- struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
+ struct iwl_priv *priv = dev_get_drvdata(d);
if (!iwl_is_alive(priv))
return -EAGAIN;
return sprintf(buf, "0x%08x\n", (int)priv->status);
@@ -4005,10 +4003,11 @@ static ssize_t dump_error_log(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
+ struct iwl_priv *priv = dev_get_drvdata(d);
char *p = (char *)buf;
if (p[0] == '1')
- iwl3945_dump_nic_error_log((struct iwl_priv *)d->driver_data);
+ iwl3945_dump_nic_error_log(priv);
return strnlen(buf, count);
}
@@ -4019,10 +4018,11 @@ static ssize_t dump_event_log(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
+ struct iwl_priv *priv = dev_get_drvdata(d);
char *p = (char *)buf;
if (p[0] == '1')
- iwl3945_dump_nic_event_log((struct iwl_priv *)d->driver_data);
+ iwl3945_dump_nic_event_log(priv);
return strnlen(buf, count);
}
@@ -4104,7 +4104,6 @@ static struct ieee80211_ops iwl3945_hw_ops = {
.add_interface = iwl_mac_add_interface,
.remove_interface = iwl_mac_remove_interface,
.config = iwl_mac_config,
- .config_interface = iwl_mac_config_interface,
.configure_filter = iwl_configure_filter,
.set_key = iwl3945_mac_set_key,
.get_tx_stats = iwl_mac_get_tx_stats,
@@ -4210,8 +4209,6 @@ static int iwl3945_setup_mac(struct iwl_priv *priv)
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
- hw->conf.beacon_int = 100;
-
if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&priv->bands[IEEE80211_BAND_2GHZ];
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index e7289e2e7f1..10a99e26d39 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -366,36 +366,6 @@ static int lbtf_op_config(struct ieee80211_hw *hw, u32 changed)
return 0;
}
-static int lbtf_op_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct lbtf_private *priv = hw->priv;
- struct sk_buff *beacon;
-
- switch (priv->vif->type) {
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_MESH_POINT:
- beacon = ieee80211_beacon_get(hw, vif);
- if (beacon) {
- lbtf_beacon_set(priv, beacon);
- kfree_skb(beacon);
- lbtf_beacon_ctrl(priv, 1, hw->conf.beacon_int);
- }
- break;
- default:
- break;
- }
-
- if (conf->bssid) {
- u8 null_bssid[ETH_ALEN] = {0};
- bool activate = compare_ether_addr(conf->bssid, null_bssid);
- lbtf_set_bssid(priv, activate, conf->bssid);
- }
-
- return 0;
-}
-
#define SUPPORTED_FIF_FLAGS (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)
static void lbtf_op_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
@@ -451,6 +421,29 @@ static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw,
u32 changes)
{
struct lbtf_private *priv = hw->priv;
+ struct sk_buff *beacon;
+
+ if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_INT)) {
+ switch (priv->vif->type) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
+ beacon = ieee80211_beacon_get(hw, vif);
+ if (beacon) {
+ lbtf_beacon_set(priv, beacon);
+ kfree_skb(beacon);
+ lbtf_beacon_ctrl(priv, 1,
+ bss_conf->beacon_int);
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (changes & BSS_CHANGED_BSSID) {
+ bool activate = !is_zero_ether_addr(bss_conf->bssid);
+ lbtf_set_bssid(priv, activate, bss_conf->bssid);
+ }
if (changes & BSS_CHANGED_ERP_PREAMBLE) {
if (bss_conf->use_short_preamble)
@@ -459,8 +452,6 @@ static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw,
priv->preamble = CMD_TYPE_LONG_PREAMBLE;
lbtf_set_radio_control(priv);
}
-
- return;
}
static const struct ieee80211_ops lbtf_ops = {
@@ -470,7 +461,6 @@ static const struct ieee80211_ops lbtf_ops = {
.add_interface = lbtf_op_add_interface,
.remove_interface = lbtf_op_remove_interface,
.config = lbtf_op_config,
- .config_interface = lbtf_op_config_interface,
.configure_filter = lbtf_op_configure_filter,
.bss_info_changed = lbtf_op_bss_info_changed,
};
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index d4fdc8b7d7d..b1213b6a6b9 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -553,18 +553,15 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
struct mac80211_hwsim_data *data = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
- printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d beacon_int=%d)\n",
+ printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d idle=%d ps=%d)\n",
wiphy_name(hw->wiphy), __func__,
conf->channel->center_freq, conf->radio_enabled,
- conf->beacon_int);
+ !!(conf->flags & IEEE80211_CONF_IDLE),
+ !!(conf->flags & IEEE80211_CONF_PS));
data->channel = conf->channel;
data->radio_enabled = conf->radio_enabled;
- data->beacon_int = 1024 * conf->beacon_int / 1000 * HZ / 1000;
- if (data->beacon_int < 1)
- data->beacon_int = 1;
-
- if (!data->started || !data->radio_enabled)
+ if (!data->started || !data->radio_enabled || !data->beacon_int)
del_timer(&data->beacon_timer);
else
mod_timer(&data->beacon_timer, jiffies + data->beacon_int);
@@ -592,35 +589,26 @@ static void mac80211_hwsim_configure_filter(struct ieee80211_hw *hw,
*total_flags = data->rx_filter;
}
-static int mac80211_hwsim_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
-
- hwsim_check_magic(vif);
- if (conf->changed & IEEE80211_IFCC_BSSID) {
- DECLARE_MAC_BUF(mac);
- printk(KERN_DEBUG "%s:%s: BSSID changed: %pM\n",
- wiphy_name(hw->wiphy), __func__,
- conf->bssid);
- memcpy(vp->bssid, conf->bssid, ETH_ALEN);
- }
- return 0;
-}
-
static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info,
u32 changed)
{
struct hwsim_vif_priv *vp = (void *)vif->drv_priv;
+ struct mac80211_hwsim_data *data = hw->priv;
hwsim_check_magic(vif);
printk(KERN_DEBUG "%s:%s(changed=0x%x)\n",
wiphy_name(hw->wiphy), __func__, changed);
+ if (changed & BSS_CHANGED_BSSID) {
+ printk(KERN_DEBUG "%s:%s: BSSID changed: %pM\n",
+ wiphy_name(hw->wiphy), __func__,
+ info->bssid);
+ memcpy(vp->bssid, info->bssid, ETH_ALEN);
+ }
+
if (changed & BSS_CHANGED_ASSOC) {
printk(KERN_DEBUG " %s: ASSOC: assoc=%d aid=%d\n",
wiphy_name(hw->wiphy), info->assoc, info->aid);
@@ -628,6 +616,14 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw,
vp->aid = info->aid;
}
+ if (changed & BSS_CHANGED_BEACON_INT) {
+ printk(KERN_DEBUG " %s: BCNINT: %d\n",
+ wiphy_name(hw->wiphy), info->beacon_int);
+ data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000;
+ if (WARN_ON(!data->beacon_int))
+ data->beacon_int = 1;
+ }
+
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
printk(KERN_DEBUG " %s: ERP_CTS_PROT: %d\n",
wiphy_name(hw->wiphy), info->use_cts_prot);
@@ -704,7 +700,6 @@ static const struct ieee80211_ops mac80211_hwsim_ops =
.remove_interface = mac80211_hwsim_remove_interface,
.config = mac80211_hwsim_config,
.configure_filter = mac80211_hwsim_configure_filter,
- .config_interface = mac80211_hwsim_config_interface,
.bss_info_changed = mac80211_hwsim_bss_info_changed,
.sta_notify = mac80211_hwsim_sta_notify,
.set_tim = mac80211_hwsim_set_tim,
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index a9a970469c2..46b288dc8f4 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -3089,19 +3089,6 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
return rc ? -EINVAL : 0;
}
-static int mwl8k_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
- u32 changed = conf->changed;
-
- if (changed & IEEE80211_IFCC_BSSID)
- memcpy(mv_vif->bssid, conf->bssid, IEEE80211_ADDR_LEN);
-
- return 0;
-}
-
struct mwl8k_bss_info_changed_worker {
struct mwl8k_work_struct header;
struct ieee80211_vif *vif;
@@ -3183,8 +3170,12 @@ static void mwl8k_bss_info_changed(struct ieee80211_hw *hw,
{
struct mwl8k_bss_info_changed_worker *worker;
struct mwl8k_priv *priv = hw->priv;
+ struct mwl8k_vif *mv_vif = MWL8K_VIF(vif);
int rc;
+ if (changed & BSS_CHANGED_BSSID)
+ memcpy(mv_vif->bssid, info->bssid, IEEE80211_ADDR_LEN);
+
if ((changed & BSS_CHANGED_ASSOC) == 0)
return;
@@ -3442,7 +3433,6 @@ static const struct ieee80211_ops mwl8k_ops = {
.add_interface = mwl8k_add_interface,
.remove_interface = mwl8k_remove_interface,
.config = mwl8k_config,
- .config_interface = mwl8k_config_interface,
.bss_info_changed = mwl8k_bss_info_changed,
.configure_filter = mwl8k_configure_filter,
.set_rts_threshold = mwl8k_set_rts_threshold,
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index 7fda1a9e263..db3df947d8e 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -189,10 +189,10 @@ struct p54_common {
unsigned long *used_rxkeys;
/* LED management */
-#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
struct p54_led_dev leds[4];
struct delayed_work led_work;
-#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
u16 softled_state; /* bit field of glowing LEDs */
/* statistics */
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 71394968d45..48d81d98e12 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -822,7 +822,6 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
struct ieee80211_tx_info *info;
struct p54_tx_info *range;
unsigned long flags;
- u32 freed = 0, last_addr = priv->rx_start;
if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue)))
return;
@@ -842,7 +841,6 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
ni = IEEE80211_SKB_CB(skb->prev);
mr = (struct p54_tx_info *)ni->rate_driver_data;
- last_addr = mr->end_addr;
}
if (skb->next != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *ni;
@@ -850,16 +848,11 @@ void p54_free_skb(struct ieee80211_hw *dev, struct sk_buff *skb)
ni = IEEE80211_SKB_CB(skb->next);
mr = (struct p54_tx_info *)ni->rate_driver_data;
- freed = mr->start_addr - last_addr;
- } else
- freed = priv->rx_end - last_addr;
+ }
__skb_unlink(skb, &priv->tx_queue);
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
dev_kfree_skb_any(skb);
-
- if (freed >= priv->headroom + sizeof(struct p54_hdr) + 48 +
- IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom)
- p54_wake_free_queues(dev);
+ p54_wake_free_queues(dev);
}
EXPORT_SYMBOL_GPL(p54_free_skb);
@@ -893,8 +886,6 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
struct sk_buff *entry;
u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
struct p54_tx_info *range = NULL;
- u32 freed = 0;
- u32 last_addr = priv->rx_start;
unsigned long flags;
int count, idx;
@@ -908,7 +899,6 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
range = (void *)info->rate_driver_data;
if (range->start_addr != addr) {
- last_addr = range->end_addr;
entry = entry->next;
continue;
}
@@ -919,11 +909,8 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
ni = IEEE80211_SKB_CB(entry->next);
mr = (struct p54_tx_info *)ni->rate_driver_data;
- freed = mr->start_addr - last_addr;
- } else
- freed = priv->rx_end - last_addr;
+ }
- last_addr = range->end_addr;
__skb_unlink(entry, &priv->tx_queue);
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
@@ -1010,9 +997,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
out:
- if (freed >= priv->headroom + sizeof(struct p54_hdr) + 48 +
- IEEE80211_MAX_RTS_THRESHOLD + priv->tailroom)
- p54_wake_free_queues(dev);
+ p54_wake_free_queues(dev);
}
static void p54_rx_eeprom_readback(struct ieee80211_hw *dev,
@@ -2204,41 +2189,6 @@ out:
return ret;
}
-static int p54_config_interface(struct ieee80211_hw *dev,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct p54_common *priv = dev->priv;
- int ret = 0;
-
- mutex_lock(&priv->conf_mutex);
- if (conf->changed & IEEE80211_IFCC_BSSID) {
- memcpy(priv->bssid, conf->bssid, ETH_ALEN);
- ret = p54_setup_mac(dev);
- if (ret)
- goto out;
- }
-
- if (conf->changed & IEEE80211_IFCC_BEACON) {
- ret = p54_scan(dev, P54_SCAN_EXIT, 0);
- if (ret)
- goto out;
- ret = p54_setup_mac(dev);
- if (ret)
- goto out;
- ret = p54_beacon_update(dev, vif);
- if (ret)
- goto out;
- ret = p54_set_edcf(dev);
- if (ret)
- goto out;
- }
-
-out:
- mutex_unlock(&priv->conf_mutex);
- return ret;
-}
-
static void p54_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
@@ -2342,8 +2292,32 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev,
u32 changed)
{
struct p54_common *priv = dev->priv;
+ int ret;
+
+ mutex_lock(&priv->conf_mutex);
+ if (changed & BSS_CHANGED_BSSID) {
+ memcpy(priv->bssid, info->bssid, ETH_ALEN);
+ ret = p54_setup_mac(dev);
+ if (ret)
+ goto out;
+ }
+
+ if (changed & BSS_CHANGED_BEACON) {
+ ret = p54_scan(dev, P54_SCAN_EXIT, 0);
+ if (ret)
+ goto out;
+ ret = p54_setup_mac(dev);
+ if (ret)
+ goto out;
+ ret = p54_beacon_update(dev, vif);
+ if (ret)
+ goto out;
+ }
+ /* XXX: this mimics having two callbacks... clean up */
+ out:
+ mutex_unlock(&priv->conf_mutex);
- if (changed & BSS_CHANGED_ERP_SLOT) {
+ if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BEACON)) {
priv->use_short_slot = info->use_short_slot;
p54_set_edcf(dev);
}
@@ -2364,7 +2338,6 @@ static void p54_bss_info_changed(struct ieee80211_hw *dev,
p54_setup_mac(dev);
}
}
-
}
static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
@@ -2619,7 +2592,6 @@ static const struct ieee80211_ops p54_ops = {
.sta_notify = p54_sta_notify,
.set_key = p54_set_key,
.config = p54_config,
- .config_interface = p54_config_interface,
.bss_info_changed = p54_bss_info_changed,
.configure_filter = p54_configure_filter,
.conf_tx = p54_conf_tx,
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 6cc6cbc9234..f40c0f468b2 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -81,6 +81,29 @@ static struct usb_device_id p54u_table[] __devinitdata = {
MODULE_DEVICE_TABLE(usb, p54u_table);
+static const struct {
+ u32 intf;
+ enum p54u_hw_type type;
+ char fw[FIRMWARE_NAME_MAX];
+ char fw_legacy[FIRMWARE_NAME_MAX];
+ char hw[20];
+} p54u_fwlist[__NUM_P54U_HWTYPES] = {
+ {
+ .type = P54U_NET2280,
+ .intf = FW_LM86,
+ .fw = "isl3886usb",
+ .fw_legacy = "isl3890usb",
+ .hw = "ISL3886 + net2280",
+ },
+ {
+ .type = P54U_3887,
+ .intf = FW_LM87,
+ .fw = "isl3887usb",
+ .fw_legacy = "isl3887usb_bare",
+ .hw = "ISL3887",
+ },
+};
+
static void p54u_rx_cb(struct urb *urb)
{
struct sk_buff *skb = (struct sk_buff *) urb->context;
@@ -125,11 +148,7 @@ static void p54u_rx_cb(struct urb *urb)
}
skb_reset_tail_pointer(skb);
skb_trim(skb, 0);
- if (urb->transfer_buffer != skb_tail_pointer(skb)) {
- /* this should not happen */
- WARN_ON(1);
- urb->transfer_buffer = skb_tail_pointer(skb);
- }
+ urb->transfer_buffer = skb_tail_pointer(skb);
}
skb_queue_tail(&priv->rx_queue, skb);
usb_anchor_urb(urb, &priv->submitted);
@@ -206,53 +225,6 @@ static int p54u_init_urbs(struct ieee80211_hw *dev)
return ret;
}
-static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
- struct p54u_priv *priv = dev->priv;
- struct urb *addr_urb, *data_urb;
- int err = 0;
-
- addr_urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!addr_urb)
- return;
-
- data_urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!data_urb) {
- usb_free_urb(addr_urb);
- return;
- }
-
- usb_fill_bulk_urb(addr_urb, priv->udev,
- usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
- &((struct p54_hdr *)skb->data)->req_id, 4,
- p54u_tx_dummy_cb, dev);
- usb_fill_bulk_urb(data_urb, priv->udev,
- usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
- skb->data, skb->len, FREE_AFTER_TX(skb) ?
- p54u_tx_cb : p54u_tx_dummy_cb, skb);
- addr_urb->transfer_flags |= URB_ZERO_PACKET;
- data_urb->transfer_flags |= URB_ZERO_PACKET;
-
- usb_anchor_urb(addr_urb, &priv->submitted);
- err = usb_submit_urb(addr_urb, GFP_ATOMIC);
- if (err) {
- usb_unanchor_urb(addr_urb);
- goto out;
- }
-
- usb_anchor_urb(data_urb, &priv->submitted);
- err = usb_submit_urb(data_urb, GFP_ATOMIC);
- if (err)
- usb_unanchor_urb(data_urb);
-
- out:
- usb_free_urb(addr_urb);
- usb_free_urb(data_urb);
-
- if (err)
- p54_free_skb(dev, skb);
-}
-
static __le32 p54u_lm87_chksum(const __le32 *data, size_t length)
{
u32 chk = 0;
@@ -425,20 +397,16 @@ static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep,
data, len, &alen, 2000);
}
-static const char p54u_romboot_3887[] = "~~~~";
-static const char p54u_firmware_upload_3887[] = "<\r";
-
-static int p54u_device_reset_3887(struct ieee80211_hw *dev)
+static int p54u_device_reset(struct ieee80211_hw *dev)
{
struct p54u_priv *priv = dev->priv;
int ret, lock = (priv->intf->condition != USB_INTERFACE_BINDING);
- u8 buf[4];
if (lock) {
ret = usb_lock_device_for_reset(priv->udev, priv->intf);
if (ret < 0) {
dev_err(&priv->udev->dev, "(p54usb) unable to lock "
- " device for reset: %d\n", ret);
+ "device for reset (%d)!\n", ret);
return ret;
}
}
@@ -447,26 +415,34 @@ static int p54u_device_reset_3887(struct ieee80211_hw *dev)
if (lock)
usb_unlock_device(priv->udev);
- if (ret) {
+ if (ret)
dev_err(&priv->udev->dev, "(p54usb) unable to reset "
- "device: %d\n", ret);
- return ret;
- }
+ "device (%d)!\n", ret);
+
+ return ret;
+}
+
+static const char p54u_romboot_3887[] = "~~~~";
+static int p54u_firmware_reset_3887(struct ieee80211_hw *dev)
+{
+ struct p54u_priv *priv = dev->priv;
+ u8 buf[4];
+ int ret;
memcpy(&buf, p54u_romboot_3887, sizeof(buf));
ret = p54u_bulk_msg(priv, P54U_PIPE_DATA,
buf, sizeof(buf));
if (ret)
dev_err(&priv->udev->dev, "(p54usb) unable to jump to "
- "boot ROM: %d\n", ret);
+ "boot ROM (%d)!\n", ret);
return ret;
}
+static const char p54u_firmware_upload_3887[] = "<\r";
static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
{
struct p54u_priv *priv = dev->priv;
- const struct firmware *fw_entry = NULL;
int err, alen;
u8 carry = 0;
u8 *buf, *tmp;
@@ -475,51 +451,29 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
struct x2_header *hdr;
unsigned long timeout;
+ err = p54u_firmware_reset_3887(dev);
+ if (err)
+ return err;
+
tmp = buf = kmalloc(P54U_FW_BLOCK, GFP_KERNEL);
if (!buf) {
dev_err(&priv->udev->dev, "(p54usb) cannot allocate firmware"
"upload buffer!\n");
- err = -ENOMEM;
- goto err_bufalloc;
- }
-
- err = p54u_device_reset_3887(dev);
- if (err)
- goto err_reset;
-
- err = request_firmware(&fw_entry, "isl3887usb", &priv->udev->dev);
- if (err) {
- dev_err(&priv->udev->dev, "p54usb: cannot find firmware "
- "(isl3887usb)\n");
- err = request_firmware(&fw_entry, "isl3887usb_bare",
- &priv->udev->dev);
- if (err)
- goto err_req_fw_failed;
- }
-
- err = p54_parse_firmware(dev, fw_entry);
- if (err)
- goto err_upload_failed;
-
- if (priv->common.fw_interface != FW_LM87) {
- dev_err(&priv->udev->dev, "wrong firmware, "
- "please get a LM87 firmware and try again.\n");
- err = -EINVAL;
- goto err_upload_failed;
+ return -ENOMEM;
}
- left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size);
+ left = block_size = min((size_t)P54U_FW_BLOCK, priv->fw->size);
strcpy(buf, p54u_firmware_upload_3887);
left -= strlen(p54u_firmware_upload_3887);
tmp += strlen(p54u_firmware_upload_3887);
- data = fw_entry->data;
- remains = fw_entry->size;
+ data = priv->fw->data;
+ remains = priv->fw->size;
hdr = (struct x2_header *)(buf + strlen(p54u_firmware_upload_3887));
memcpy(hdr->signature, X2_SIGNATURE, X2_SIGNATURE_SIZE);
hdr->fw_load_addr = cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR);
- hdr->fw_length = cpu_to_le32(fw_entry->size);
+ hdr->fw_length = cpu_to_le32(priv->fw->size);
hdr->crc = cpu_to_le32(~crc32_le(~0, (void *)&hdr->fw_load_addr,
sizeof(u32)*2));
left -= sizeof(*hdr);
@@ -561,7 +515,8 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
left = block_size = min((unsigned int)P54U_FW_BLOCK, remains);
}
- *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size));
+ *((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, priv->fw->data,
+ priv->fw->size));
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32));
if (err) {
dev_err(&priv->udev->dev, "(p54usb) firmware upload failed!\n");
@@ -612,19 +567,14 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
if (err)
goto err_upload_failed;
- err_upload_failed:
- release_firmware(fw_entry);
- err_req_fw_failed:
- err_reset:
+err_upload_failed:
kfree(buf);
- err_bufalloc:
return err;
}
static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
{
struct p54u_priv *priv = dev->priv;
- const struct firmware *fw_entry = NULL;
const struct p54p_csr *devreg = (const struct p54p_csr *) P54U_DEV_BASE;
int err, alen;
void *buf;
@@ -639,33 +589,6 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
return -ENOMEM;
}
- err = request_firmware(&fw_entry, "isl3886usb", &priv->udev->dev);
- if (err) {
- dev_err(&priv->udev->dev, "(p54usb) cannot find firmware "
- "(isl3886usb)\n");
- err = request_firmware(&fw_entry, "isl3890usb",
- &priv->udev->dev);
- if (err) {
- kfree(buf);
- return err;
- }
- }
-
- err = p54_parse_firmware(dev, fw_entry);
- if (err) {
- kfree(buf);
- release_firmware(fw_entry);
- return err;
- }
-
- if (priv->common.fw_interface != FW_LM86) {
- dev_err(&priv->udev->dev, "wrong firmware, "
- "please get a LM86(USB) firmware and try again.\n");
- kfree(buf);
- release_firmware(fw_entry);
- return -EINVAL;
- }
-
#define P54U_WRITE(type, addr, data) \
do {\
err = p54u_write(priv, buf, type,\
@@ -765,8 +688,8 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
P54U_WRITE(NET2280_DEV_U32, &devreg->int_ack, reg);
/* finally, we can upload firmware now! */
- remains = fw_entry->size;
- data = fw_entry->data;
+ remains = priv->fw->size;
+ data = priv->fw->data;
offset = ISL38XX_DEV_FIRMWARE_ADDR;
while (remains) {
@@ -875,12 +798,54 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
#undef P54U_WRITE
#undef P54U_READ
- fail:
- release_firmware(fw_entry);
+fail:
kfree(buf);
return err;
}
+static int p54u_load_firmware(struct ieee80211_hw *dev)
+{
+ struct p54u_priv *priv = dev->priv;
+ int err, i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES);
+
+ for (i = 0; i < __NUM_P54U_HWTYPES; i++)
+ if (p54u_fwlist[i].type == priv->hw_type)
+ break;
+
+ if (i == __NUM_P54U_HWTYPES)
+ return -EOPNOTSUPP;
+
+ err = request_firmware(&priv->fw, p54u_fwlist[i].fw, &priv->udev->dev);
+ if (err) {
+ dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
+ "(%d)!\n", p54u_fwlist[i].fw, err);
+
+ err = request_firmware(&priv->fw, p54u_fwlist[i].fw_legacy,
+ &priv->udev->dev);
+ if (err)
+ return err;
+ }
+
+ err = p54_parse_firmware(dev, priv->fw);
+ if (err)
+ goto out;
+
+ if (priv->common.fw_interface != p54u_fwlist[i].intf) {
+ dev_err(&priv->udev->dev, "wrong firmware, please get "
+ "a firmware for \"%s\" and try again.\n",
+ p54u_fwlist[i].hw);
+ err = -EINVAL;
+ }
+
+out:
+ if (err)
+ release_firmware(priv->fw);
+
+ return err;
+}
+
static int p54u_open(struct ieee80211_hw *dev)
{
struct p54u_priv *priv = dev->priv;
@@ -922,6 +887,7 @@ static int __devinit p54u_probe(struct usb_interface *intf,
}
priv = dev->priv;
+ priv->hw_type = P54U_INVALID_HW;
SET_IEEE80211_DEV(dev, &intf->dev);
usb_set_intfdata(intf, dev);
@@ -953,37 +919,48 @@ static int __devinit p54u_probe(struct usb_interface *intf,
priv->common.open = p54u_open;
priv->common.stop = p54u_stop;
if (recognized_pipes < P54U_PIPE_NUMBER) {
+#ifdef CONFIG_PM
+ /* ISL3887 needs a full reset on resume */
+ udev->reset_resume = 1;
+ err = p54u_device_reset(dev);
+#endif
+
priv->hw_type = P54U_3887;
- err = p54u_upload_firmware_3887(dev);
- if (priv->common.fw_interface == FW_LM87) {
- dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr);
- priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr);
- priv->common.tx = p54u_tx_lm87;
- } else
- priv->common.tx = p54u_tx_3887;
+ dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr);
+ priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr);
+ priv->common.tx = p54u_tx_lm87;
+ priv->upload_fw = p54u_upload_firmware_3887;
} else {
priv->hw_type = P54U_NET2280;
dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr);
priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr);
priv->common.tx = p54u_tx_net2280;
- err = p54u_upload_firmware_net2280(dev);
+ priv->upload_fw = p54u_upload_firmware_net2280;
}
+ err = p54u_load_firmware(dev);
if (err)
goto err_free_dev;
+ err = priv->upload_fw(dev);
+ if (err)
+ goto err_free_fw;
+
p54u_open(dev);
err = p54_read_eeprom(dev);
p54u_stop(dev);
if (err)
- goto err_free_dev;
+ goto err_free_fw;
err = p54_register_common(dev, &udev->dev);
if (err)
- goto err_free_dev;
+ goto err_free_fw;
return 0;
- err_free_dev:
+err_free_fw:
+ release_firmware(priv->fw);
+
+err_free_dev:
ieee80211_free_hw(dev);
usb_set_intfdata(intf, NULL);
usb_put_dev(udev);
@@ -1002,20 +979,64 @@ static void __devexit p54u_disconnect(struct usb_interface *intf)
priv = dev->priv;
usb_put_dev(interface_to_usbdev(intf));
+ release_firmware(priv->fw);
p54_free_common(dev);
ieee80211_free_hw(dev);
}
static int p54u_pre_reset(struct usb_interface *intf)
{
+ struct ieee80211_hw *dev = usb_get_intfdata(intf);
+
+ if (!dev)
+ return -ENODEV;
+
+ p54u_stop(dev);
return 0;
}
+static int p54u_resume(struct usb_interface *intf)
+{
+ struct ieee80211_hw *dev = usb_get_intfdata(intf);
+ struct p54u_priv *priv;
+
+ if (!dev)
+ return -ENODEV;
+
+ priv = dev->priv;
+ if (unlikely(!(priv->upload_fw && priv->fw)))
+ return 0;
+
+ return priv->upload_fw(dev);
+}
+
static int p54u_post_reset(struct usb_interface *intf)
{
+ struct ieee80211_hw *dev = usb_get_intfdata(intf);
+ struct p54u_priv *priv;
+ int err;
+
+ err = p54u_resume(intf);
+ if (err)
+ return err;
+
+ /* reinitialize old device state */
+ priv = dev->priv;
+ if (priv->common.mode != NL80211_IFTYPE_UNSPECIFIED)
+ ieee80211_restart_hw(dev);
+
return 0;
}
+#ifdef CONFIG_PM
+
+static int p54u_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ return p54u_pre_reset(intf);
+}
+
+#endif /* CONFIG_PM */
+
static struct usb_driver p54u_driver = {
.name = "p54usb",
.id_table = p54u_table,
@@ -1023,6 +1044,11 @@ static struct usb_driver p54u_driver = {
.disconnect = p54u_disconnect,
.pre_reset = p54u_pre_reset,
.post_reset = p54u_post_reset,
+#ifdef CONFIG_PM
+ .suspend = p54u_suspend,
+ .resume = p54u_resume,
+ .reset_resume = p54u_resume,
+#endif /* CONFIG_PM */
.soft_unbind = 1,
};
diff --git a/drivers/net/wireless/p54/p54usb.h b/drivers/net/wireless/p54/p54usb.h
index 8bc58982d8d..e935b79f7f7 100644
--- a/drivers/net/wireless/p54/p54usb.h
+++ b/drivers/net/wireless/p54/p54usb.h
@@ -123,18 +123,26 @@ struct p54u_rx_info {
struct ieee80211_hw *dev;
};
+enum p54u_hw_type {
+ P54U_INVALID_HW,
+ P54U_NET2280,
+ P54U_3887,
+
+ /* keep last */
+ __NUM_P54U_HWTYPES,
+};
+
struct p54u_priv {
struct p54_common common;
struct usb_device *udev;
struct usb_interface *intf;
- enum {
- P54U_NET2280 = 0,
- P54U_3887
- } hw_type;
+ int (*upload_fw)(struct ieee80211_hw *dev);
+ enum p54u_hw_type hw_type;
spinlock_t lock;
struct sk_buff_head rx_queue;
struct usb_anchor submitted;
+ const struct firmware *fw;
};
#endif /* P54USB_H */
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index bfc5d9cf716..18ee7d6c402 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -77,6 +77,20 @@ config RT73USB
When compiled as a module, this driver will be called "rt73usb.ko".
+config RT2800USB
+ tristate "Ralink rt2800 (USB) support"
+ depends on USB
+ select RT2X00_LIB_USB
+ select RT2X00_LIB_HT
+ select RT2X00_LIB_FIRMWARE
+ select RT2X00_LIB_CRYPTO
+ select CRC_CCITT
+ ---help---
+ This adds support for rt2800 wireless chipset family.
+ Supported chips: RT2770, RT2870 & RT3070.
+
+ When compiled as a module, this driver will be called "rt2800usb.ko".
+
config RT2X00_LIB_PCI
tristate
select RT2X00_LIB
@@ -88,6 +102,9 @@ config RT2X00_LIB_USB
config RT2X00_LIB
tristate
+config RT2X00_LIB_HT
+ boolean
+
config RT2X00_LIB_FIRMWARE
boolean
select FW_LOADER
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index f22d808d8c5..bfc7226f0af 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -8,6 +8,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO) += rt2x00crypto.o
rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL) += rt2x00rfkill.o
rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE) += rt2x00firmware.o
rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS) += rt2x00leds.o
+rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2x00ht.o
obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o
obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
@@ -17,3 +18,4 @@ obj-$(CONFIG_RT2500PCI) += rt2500pci.o
obj-$(CONFIG_RT61PCI) += rt61pci.o
obj-$(CONFIG_RT2500USB) += rt2500usb.o
obj-$(CONFIG_RT73USB) += rt73usb.o
+obj-$(CONFIG_RT2800USB) += rt2800usb.o
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 411eb9cbb4e..6f39ba66218 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1580,7 +1580,6 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
- .config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index e1be67ca23d..906960f67b6 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1879,7 +1879,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
- .config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 9e630e70fc9..1debb88bc60 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1559,7 +1559,7 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
- if (!rt2x00_check_rev(&rt2x00dev->chip, 0)) {
+ if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0)) {
ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
return -ENODEV;
}
@@ -1908,7 +1908,6 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
- .config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
.set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
new file mode 100644
index 00000000000..257bfb5483c
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -0,0 +1,3071 @@
+/*
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2800usb
+ Abstract: rt2800usb device specific routines.
+ Supported chipsets: RT2800U.
+ */
+
+#include <linux/crc-ccitt.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "rt2x00.h"
+#include "rt2x00usb.h"
+#include "rt2800usb.h"
+
+/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 1;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
+ * Register access.
+ * All access to the CSR registers will go through the methods
+ * rt2x00usb_register_read and rt2x00usb_register_write.
+ * BBP and RF register require indirect register access,
+ * and use the CSR registers BBPCSR and RFCSR to achieve this.
+ * These indirect registers work with busy bits,
+ * and we will try maximal REGISTER_BUSY_COUNT times to access
+ * the register while taking a REGISTER_BUSY_DELAY us delay
+ * between each attampt. When the busy bit is still set at that time,
+ * the access attempt is considered to have failed,
+ * and we will print an error.
+ * The _lock versions must be used if you already hold the csr_mutex
+ */
+#define WAIT_FOR_BBP(__dev, __reg) \
+ rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RFCSR(__dev, __reg) \
+ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+#define WAIT_FOR_MCU(__dev, __reg) \
+ rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \
+ H2M_MAILBOX_CSR_OWNER, (__reg))
+
+static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the BBP becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
+ rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+ rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
+
+ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u8 *value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the BBP becomes available, afterwards we
+ * can safely write the read request into the register.
+ * After the data has been written, we wait until hardware
+ * returns the correct value, if at any time the register
+ * doesn't become available in time, reg will be 0xffffffff
+ * which means we return 0xff to the caller.
+ */
+ if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+ rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
+
+ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+
+ WAIT_FOR_BBP(rt2x00dev, &reg);
+ }
+
+ *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the RFCSR becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+ rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u8 *value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the RFCSR becomes available, afterwards we
+ * can safely write the read request into the register.
+ * After the data has been written, we wait until hardware
+ * returns the correct value, if at any time the register
+ * doesn't become available in time, reg will be 0xffffffff
+ * which means we return 0xff to the caller.
+ */
+ if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+
+ WAIT_FOR_RFCSR(rt2x00dev, &reg);
+ }
+
+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u32 value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the RF becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_RF(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
+ rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
+ rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
+ rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
+
+ rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
+ rt2x00_rf_write(rt2x00dev, word, value);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev,
+ const u8 command, const u8 token,
+ const u8 arg0, const u8 arg1)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the MCU becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
+ rt2x00usb_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
+
+ reg = 0;
+ rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
+ rt2x00usb_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+static const struct rt2x00debug rt2800usb_rt2x00debug = {
+ .owner = THIS_MODULE,
+ .csr = {
+ .read = rt2x00usb_register_read,
+ .write = rt2x00usb_register_write,
+ .flags = RT2X00DEBUGFS_OFFSET,
+ .word_base = CSR_REG_BASE,
+ .word_size = sizeof(u32),
+ .word_count = CSR_REG_SIZE / sizeof(u32),
+ },
+ .eeprom = {
+ .read = rt2x00_eeprom_read,
+ .write = rt2x00_eeprom_write,
+ .word_base = EEPROM_BASE,
+ .word_size = sizeof(u16),
+ .word_count = EEPROM_SIZE / sizeof(u16),
+ },
+ .bbp = {
+ .read = rt2800usb_bbp_read,
+ .write = rt2800usb_bbp_write,
+ .word_base = BBP_BASE,
+ .word_size = sizeof(u8),
+ .word_count = BBP_SIZE / sizeof(u8),
+ },
+ .rf = {
+ .read = rt2x00_rf_read,
+ .write = rt2800usb_rf_write,
+ .word_base = RF_BASE,
+ .word_size = sizeof(u32),
+ .word_count = RF_SIZE / sizeof(u32),
+ },
+};
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
+#ifdef CONFIG_RT2X00_LIB_RFKILL
+static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
+{
+ u32 reg;
+
+ rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+ return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+}
+#else
+#define rt2800usb_rfkill_poll NULL
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
+
+#ifdef CONFIG_RT2X00_LIB_LEDS
+static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ unsigned int enabled = brightness != LED_OFF;
+ unsigned int bg_mode =
+ (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+ unsigned int polarity =
+ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+ EEPROM_FREQ_LED_POLARITY);
+ unsigned int ledmode =
+ rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+ EEPROM_FREQ_LED_MODE);
+
+ if (led->type == LED_TYPE_RADIO) {
+ rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+ enabled ? 0x20 : 0);
+ } else if (led->type == LED_TYPE_ASSOC) {
+ rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+ enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
+ } else if (led->type == LED_TYPE_QUALITY) {
+ /*
+ * The brightness is divided into 6 levels (0 - 5),
+ * The specs tell us the following levels:
+ * 0, 1 ,3, 7, 15, 31
+ * to determine the level in a simple way we can simply
+ * work with bitshifting:
+ * (1 << level) - 1
+ */
+ rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+ (1 << brightness / (LED_FULL / 6)) - 1,
+ polarity);
+ }
+}
+
+static int rt2800usb_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ u32 reg;
+
+ rt2x00usb_register_read(led->rt2x00dev, LED_CFG, &reg);
+ rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
+ rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
+ rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
+ rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
+ rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
+ rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
+ rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
+ rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg);
+
+ return 0;
+}
+
+static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_led *led,
+ enum led_type type)
+{
+ led->rt2x00dev = rt2x00dev;
+ led->type = type;
+ led->led_dev.brightness_set = rt2800usb_brightness_set;
+ led->led_dev.blink_set = rt2800usb_blink_set;
+ led->flags = LED_INITIALIZED;
+}
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+/*
+ * Configuration handlers.
+ */
+static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct mac_wcid_entry wcid_entry;
+ struct mac_iveiv_entry iveiv_entry;
+ u32 offset;
+ u32 reg;
+
+ offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
+
+ rt2x00usb_register_read(rt2x00dev, offset, &reg);
+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
+ !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
+ (crypto->cmd == SET_KEY) * crypto->cipher);
+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+ (crypto->cmd == SET_KEY) * crypto->bssidx);
+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
+ rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+ offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
+
+ memset(&iveiv_entry, 0, sizeof(iveiv_entry));
+ if ((crypto->cipher == CIPHER_TKIP) ||
+ (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
+ (crypto->cipher == CIPHER_AES))
+ iveiv_entry.iv[3] |= 0x20;
+ iveiv_entry.iv[3] |= key->keyidx << 6;
+ rt2x00usb_register_multiwrite(rt2x00dev, offset,
+ &iveiv_entry, sizeof(iveiv_entry));
+
+ offset = MAC_WCID_ENTRY(key->hw_key_idx);
+
+ memset(&wcid_entry, 0, sizeof(wcid_entry));
+ if (crypto->cmd == SET_KEY)
+ memcpy(&wcid_entry, crypto->address, ETH_ALEN);
+ rt2x00usb_register_multiwrite(rt2x00dev, offset,
+ &wcid_entry, sizeof(wcid_entry));
+}
+
+static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_key_entry key_entry;
+ struct rt2x00_field32 field;
+ int timeout;
+ u32 offset;
+ u32 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
+
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ offset = SHARED_KEY_ENTRY(key->hw_key_idx);
+ timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT,
+ offset, &key_entry,
+ sizeof(key_entry),
+ timeout);
+ }
+
+ /*
+ * The cipher types are stored over multiple registers
+ * starting with SHARED_KEY_MODE_BASE each word will have
+ * 32 bits and contains the cipher types for 2 bssidx each.
+ * Using the correct defines correctly will cause overhead,
+ * so just calculate the correct offset.
+ */
+ field.bit_offset = 4 * (key->hw_key_idx % 8);
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
+
+ rt2x00usb_register_read(rt2x00dev, offset, &reg);
+ rt2x00_set_field32(&reg, field,
+ (crypto->cmd == SET_KEY) * crypto->cipher);
+ rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+ /*
+ * Update WCID information
+ */
+ rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
+
+ return 0;
+}
+
+static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ struct hw_key_entry key_entry;
+ int timeout;
+ u32 offset;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * 1 pairwise key is possible per AID, this means that the AID
+ * equals our hw_key_idx. Make sure the WCID starts _after_ the
+ * last possible shared key entry.
+ */
+ if (crypto->aid > (256 - 32))
+ return -ENOSPC;
+
+ key->hw_key_idx = 32 + crypto->aid;
+
+ memcpy(key_entry.key, crypto->key,
+ sizeof(key_entry.key));
+ memcpy(key_entry.tx_mic, crypto->tx_mic,
+ sizeof(key_entry.tx_mic));
+ memcpy(key_entry.rx_mic, crypto->rx_mic,
+ sizeof(key_entry.rx_mic));
+
+ offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+ timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT,
+ offset, &key_entry,
+ sizeof(key_entry),
+ timeout);
+ }
+
+ /*
+ * Update WCID information
+ */
+ rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
+
+ return 0;
+}
+
+static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev,
+ const unsigned int filter_flags)
+{
+ u32 reg;
+
+ /*
+ * Start configuration steps.
+ * Note that the version error will always be dropped
+ * and broadcast frames will always be accepted since
+ * there is no filter for it at this time.
+ */
+ rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
+ !(filter_flags & FIF_FCSFAIL));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
+ !(filter_flags & FIF_PLCPFAIL));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
+ !(filter_flags & FIF_PROMISC_IN_BSS));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
+ !(filter_flags & FIF_ALLMULTI));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg);
+}
+
+static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_intf *intf,
+ struct rt2x00intf_conf *conf,
+ const unsigned int flags)
+{
+ unsigned int beacon_base;
+ u32 reg;
+
+ if (flags & CONFIG_UPDATE_TYPE) {
+ /*
+ * Clear current synchronisation setup.
+ * For the Beacon base registers we only need to clear
+ * the first byte since that byte contains the VALID and OWNER
+ * bits which (when set to 0) will invalidate the entire beacon.
+ */
+ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+ rt2x00usb_register_write(rt2x00dev, beacon_base, 0);
+
+ /*
+ * Enable synchronisation.
+ */
+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ }
+
+ if (flags & CONFIG_UPDATE_MAC) {
+ reg = le32_to_cpu(conf->mac[1]);
+ rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
+ conf->mac[1] = cpu_to_le32(reg);
+
+ rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
+ conf->mac, sizeof(conf->mac));
+ }
+
+ if (flags & CONFIG_UPDATE_BSSID) {
+ reg = le32_to_cpu(conf->bssid[1]);
+ rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
+ rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
+ conf->bssid[1] = cpu_to_le32(reg);
+
+ rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
+ conf->bssid, sizeof(conf->bssid));
+ }
+}
+
+static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_erp *erp)
+{
+ u32 reg;
+
+ rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT,
+ DIV_ROUND_UP(erp->ack_timeout, erp->slot_time));
+ rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
+ !!erp->short_preamble);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
+ !!erp->short_preamble);
+ rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
+ erp->cts_protection ? 2 : 0);
+ rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+ rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE,
+ erp->basic_rates);
+ rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+ rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
+ rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
+ rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
+ rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
+ rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
+ rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
+ rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
+ rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
+ rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
+}
+
+static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev,
+ struct antenna_setup *ant)
+{
+ u8 r1;
+ u8 r3;
+
+ rt2800usb_bbp_read(rt2x00dev, 1, &r1);
+ rt2800usb_bbp_read(rt2x00dev, 3, &r3);
+
+ /*
+ * Configure the TX antenna.
+ */
+ switch ((int)ant->tx) {
+ case 1:
+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
+ break;
+ case 2:
+ rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
+ break;
+ case 3:
+ /* Do nothing */
+ break;
+ }
+
+ /*
+ * Configure the RX antenna.
+ */
+ switch ((int)ant->rx) {
+ case 1:
+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+ break;
+ case 2:
+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
+ break;
+ case 3:
+ rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
+ break;
+ }
+
+ rt2800usb_bbp_write(rt2x00dev, 3, r3);
+ rt2800usb_bbp_write(rt2x00dev, 1, r1);
+}
+
+static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf)
+{
+ u16 eeprom;
+ short lna_gain;
+
+ if (libconf->rf.channel <= 14) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
+ } else if (libconf->rf.channel <= 64) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
+ } else if (libconf->rf.channel <= 128) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
+ } else {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
+ lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
+ }
+
+ rt2x00dev->lna_gain = lna_gain;
+}
+
+static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
+{
+ rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+
+ if (rt2x00dev->default_ant.tx == 1)
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+
+ if (rt2x00dev->default_ant.rx == 1) {
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+ } else if (rt2x00dev->default_ant.rx == 2)
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+
+ if (rf->channel > 14) {
+ /*
+ * When TX power is below 0, we should increase it by 7 to
+ * make it a positive value (Minumum value is -7).
+ * However this means that values between 0 and 7 have
+ * double meaning, and we should set a 7DBm boost flag.
+ */
+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
+ (info->tx_power1 >= 0));
+
+ if (info->tx_power1 < 0)
+ info->tx_power1 += 7;
+
+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
+ TXPOWER_A_TO_DEV(info->tx_power1));
+
+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
+ (info->tx_power2 >= 0));
+
+ if (info->tx_power2 < 0)
+ info->tx_power2 += 7;
+
+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
+ TXPOWER_A_TO_DEV(info->tx_power2));
+ } else {
+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
+ TXPOWER_G_TO_DEV(info->tx_power1));
+ rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
+ TXPOWER_G_TO_DEV(info->tx_power2));
+ }
+
+ rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
+
+ rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
+ rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+ rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+ rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
+
+ udelay(200);
+
+ rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
+ rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+ rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
+ rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
+
+ udelay(200);
+
+ rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
+ rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
+ rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+ rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
+}
+
+static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
+{
+ u8 rfcsr;
+
+ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1);
+ rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3);
+
+ rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
+ rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+ rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
+ TXPOWER_G_TO_DEV(info->tx_power1));
+ rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr);
+
+ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
+ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
+
+ rt2800usb_rfcsr_write(rt2x00dev, 24,
+ rt2x00dev->calibration[conf_is_ht40(conf)]);
+
+ rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+ rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
+}
+
+static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
+{
+ u32 reg;
+ unsigned int tx_pin;
+ u8 bbp;
+
+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+ rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info);
+ else
+ rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info);
+
+ /*
+ * Change BBP settings
+ */
+ rt2800usb_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+ rt2800usb_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+ rt2800usb_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+ rt2800usb_bbp_write(rt2x00dev, 86, 0);
+
+ if (rf->channel <= 14) {
+ if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
+ rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
+ rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
+ } else {
+ rt2800usb_bbp_write(rt2x00dev, 82, 0x84);
+ rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
+ }
+ } else {
+ rt2800usb_bbp_write(rt2x00dev, 82, 0xf2);
+
+ if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+ rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
+ else
+ rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
+ }
+
+ rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
+ rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
+ rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
+ rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg);
+
+ tx_pin = 0;
+
+ /* Turn on unused PA or LNA when not using 1T or 1R */
+ if (rt2x00dev->default_ant.tx != 1) {
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+ }
+
+ /* Turn on unused PA or LNA when not using 1T or 1R */
+ if (rt2x00dev->default_ant.rx != 1) {
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+ }
+
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
+
+ rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+ rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
+ rt2800usb_bbp_write(rt2x00dev, 4, bbp);
+
+ rt2800usb_bbp_read(rt2x00dev, 3, &bbp);
+ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
+ rt2800usb_bbp_write(rt2x00dev, 3, bbp);
+
+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ if (conf_is_ht40(conf)) {
+ rt2800usb_bbp_write(rt2x00dev, 69, 0x1a);
+ rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
+ rt2800usb_bbp_write(rt2x00dev, 73, 0x16);
+ } else {
+ rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
+ rt2800usb_bbp_write(rt2x00dev, 70, 0x08);
+ rt2800usb_bbp_write(rt2x00dev, 73, 0x11);
+ }
+ }
+
+ msleep(1);
+}
+
+static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev,
+ const int txpower)
+{
+ u32 reg;
+ u32 value = TXPOWER_G_TO_DEV(txpower);
+ u8 r1;
+
+ rt2800usb_bbp_read(rt2x00dev, 1, &r1);
+ rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
+ rt2800usb_bbp_write(rt2x00dev, 1, r1);
+
+ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
+ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
+
+ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
+ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
+
+ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
+ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
+
+ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
+ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
+
+ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
+ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
+}
+
+static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf)
+{
+ u32 reg;
+
+ rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
+ libconf->conf->short_frame_max_tx_count);
+ rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
+ libconf->conf->long_frame_max_tx_count);
+ rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
+ rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
+ rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
+ rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
+ rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg);
+}
+
+static void rt2800usb_config_duration(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf)
+{
+ u32 reg;
+
+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+ libconf->conf->beacon_int * 16);
+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+}
+
+static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf)
+{
+ enum dev_state state =
+ (libconf->conf->flags & IEEE80211_CONF_PS) ?
+ STATE_SLEEP : STATE_AWAKE;
+ u32 reg;
+
+ if (state == STATE_SLEEP) {
+ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
+
+ rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+ rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
+ rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
+ libconf->conf->listen_interval - 1);
+ rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
+ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+ } else {
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+
+ rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+ rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
+ rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
+ rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
+ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+ }
+}
+
+static void rt2800usb_config(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf,
+ const unsigned int flags)
+{
+ /* Always recalculate LNA gain before changing configuration */
+ rt2800usb_config_lna_gain(rt2x00dev, libconf);
+
+ if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
+ rt2800usb_config_channel(rt2x00dev, libconf->conf,
+ &libconf->rf, &libconf->channel);
+ if (flags & IEEE80211_CONF_CHANGE_POWER)
+ rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level);
+ if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
+ rt2800usb_config_retry_limit(rt2x00dev, libconf);
+ if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
+ rt2800usb_config_duration(rt2x00dev, libconf);
+ if (flags & IEEE80211_CONF_CHANGE_PS)
+ rt2800usb_config_ps(rt2x00dev, libconf);
+}
+
+/*
+ * Link tuning
+ */
+static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev,
+ struct link_qual *qual)
+{
+ u32 reg;
+
+ /*
+ * Update FCS error count from register.
+ */
+ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+ qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
+}
+
+static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
+{
+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
+ return 0x1c + (2 * rt2x00dev->lna_gain);
+ else
+ return 0x2e + rt2x00dev->lna_gain;
+ }
+
+ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+ return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
+ else
+ return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
+}
+
+static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev,
+ struct link_qual *qual, u8 vgc_level)
+{
+ if (qual->vgc_level != vgc_level) {
+ rt2800usb_bbp_write(rt2x00dev, 66, vgc_level);
+ qual->vgc_level = vgc_level;
+ qual->vgc_level_reg = vgc_level;
+ }
+}
+
+static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
+ struct link_qual *qual)
+{
+ rt2800usb_set_vgc(rt2x00dev, qual,
+ rt2800usb_get_default_vgc(rt2x00dev));
+}
+
+static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev,
+ struct link_qual *qual, const u32 count)
+{
+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+ return;
+
+ /*
+ * When RSSI is better then -80 increase VGC level with 0x10
+ */
+ rt2800usb_set_vgc(rt2x00dev, qual,
+ rt2800usb_get_default_vgc(rt2x00dev) +
+ ((qual->rssi > -80) * 0x10));
+}
+
+/*
+ * Firmware functions
+ */
+static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
+{
+ return FIRMWARE_RT2870;
+}
+
+static bool rt2800usb_check_crc(const u8 *data, const size_t len)
+{
+ u16 fw_crc;
+ u16 crc;
+
+ /*
+ * The last 2 bytes in the firmware array are the crc checksum itself,
+ * this means that we should never pass those 2 bytes to the crc
+ * algorithm.
+ */
+ fw_crc = (data[len - 2] << 8 | data[len - 1]);
+
+ /*
+ * Use the crc ccitt algorithm.
+ * This will return the same value as the legacy driver which
+ * used bit ordering reversion on the both the firmware bytes
+ * before input input as well as on the final output.
+ * Obviously using crc ccitt directly is much more efficient.
+ */
+ crc = crc_ccitt(~0, data, len - 2);
+
+ /*
+ * There is a small difference between the crc-itu-t + bitrev and
+ * the crc-ccitt crc calculation. In the latter method the 2 bytes
+ * will be swapped, use swab16 to convert the crc to the correct
+ * value.
+ */
+ crc = swab16(crc);
+
+ return fw_crc == crc;
+}
+
+static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev,
+ const u8 *data, const size_t len)
+{
+ u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+ size_t offset = 0;
+
+ /*
+ * Firmware files:
+ * There are 2 variations of the rt2870 firmware.
+ * a) size: 4kb
+ * b) size: 8kb
+ * Note that (b) contains 2 seperate firmware blobs of 4k
+ * within the file. The first blob is the same firmware as (a),
+ * but the second blob is for the additional chipsets.
+ */
+ if (len != 4096 && len != 8192)
+ return FW_BAD_LENGTH;
+
+ /*
+ * Check if we need the upper 4kb firmware data or not.
+ */
+ if ((len == 4096) &&
+ (chipset != 0x2860) &&
+ (chipset != 0x2872) &&
+ (chipset != 0x3070))
+ return FW_BAD_VERSION;
+
+ /*
+ * 8kb firmware files must be checked as if it were
+ * 2 seperate firmware files.
+ */
+ while (offset < len) {
+ if (!rt2800usb_check_crc(data + offset, 4096))
+ return FW_BAD_CRC;
+
+ offset += 4096;
+ }
+
+ return FW_OK;
+}
+
+static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev,
+ const u8 *data, const size_t len)
+{
+ unsigned int i;
+ int status;
+ u32 reg;
+ u32 offset;
+ u32 length;
+ u16 chipset = (rt2x00_rev(&rt2x00dev->chip) >> 16) & 0xffff;
+
+ /*
+ * Check which section of the firmware we need.
+ */
+ if ((chipset == 0x2860) ||
+ (chipset == 0x2872) ||
+ (chipset == 0x3070)) {
+ offset = 0;
+ length = 4096;
+ } else {
+ offset = 4096;
+ length = 4096;
+ }
+
+ /*
+ * Wait for stable hardware.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+ if (reg && reg != ~0)
+ break;
+ msleep(1);
+ }
+
+ if (i == REGISTER_BUSY_COUNT) {
+ ERROR(rt2x00dev, "Unstable hardware.\n");
+ return -EBUSY;
+ }
+
+ /*
+ * Write firmware to device.
+ */
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT,
+ FIRMWARE_IMAGE_BASE,
+ data + offset, length,
+ REGISTER_TIMEOUT32(length));
+
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+
+ /*
+ * Send firmware request to device to load firmware,
+ * we need to specify a long timeout time.
+ */
+ status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
+ 0, USB_MODE_FIRMWARE,
+ REGISTER_TIMEOUT_FIRMWARE);
+ if (status < 0) {
+ ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
+ return status;
+ }
+
+ msleep(10);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+
+ /*
+ * Send signal to firmware during boot time.
+ */
+ rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+
+ if ((chipset == 0x3070) ||
+ (chipset == 0x3071) ||
+ (chipset == 0x3572)) {
+ udelay(200);
+ rt2800usb_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
+ udelay(10);
+ }
+
+ /*
+ * Wait for device to stabilize.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+ if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
+ break;
+ msleep(1);
+ }
+
+ if (i == REGISTER_BUSY_COUNT) {
+ ERROR(rt2x00dev, "PBF system register not ready.\n");
+ return -EBUSY;
+ }
+
+ /*
+ * Initialize firmware.
+ */
+ rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+ msleep(1);
+
+ return 0;
+}
+
+/*
+ * Initialization functions.
+ */
+static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+ u32 reg;
+ unsigned int i;
+
+ /*
+ * Wait untill BBP and RF are ready.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+ if (reg && reg != ~0)
+ break;
+ msleep(1);
+ }
+
+ if (i == REGISTER_BUSY_COUNT) {
+ ERROR(rt2x00dev, "Unstable hardware.\n");
+ return -EBUSY;
+ }
+
+ rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+ rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
+
+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+ rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
+
+ rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
+ USB_MODE_RESET, REGISTER_TIMEOUT);
+
+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+ rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, &reg);
+ rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
+ rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
+ rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
+ rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
+ rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg);
+
+ rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, &reg);
+ rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
+ rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
+ rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
+ rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
+ rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg);
+
+ rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
+ rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+ } else {
+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
+ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
+ }
+
+ rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
+ rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
+ rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
+ rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+ if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
+ rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
+ else
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
+ rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+
+ rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
+
+ rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
+ rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 8);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV, 1);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+ rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 8);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV, 1);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+ rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV, 1);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+ rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV, 1);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+ rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV, 1);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+ rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV, 1);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+ rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+ rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
+
+ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
+ rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+ rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
+ rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
+
+ rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
+ rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
+ IEEE80211_MAX_RTS_THRESHOLD);
+ rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
+ rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+ rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
+ rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+
+ /*
+ * ASIC will keep garbage value after boot, clear encryption keys.
+ */
+ for (i = 0; i < 256; i++) {
+ u32 wcid[2] = { 0xffffffff, 0x00ffffff };
+ rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
+ wcid, sizeof(wcid));
+
+ rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
+ rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
+ }
+
+ for (i = 0; i < 16; i++)
+ rt2x00usb_register_write(rt2x00dev,
+ SHARED_KEY_MODE_ENTRY(i), 0);
+
+ /*
+ * Clear all beacons
+ * For the Beacon base registers we only need to clear
+ * the first byte since that byte contains the VALID and OWNER
+ * bits which (when set to 0) will invalidate the entire beacon.
+ */
+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
+ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
+
+ rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, &reg);
+ rt2x00_set_field32(&reg, USB_CYC_CFG_CLOCK_CYCLE, 30);
+ rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
+ rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg);
+
+ rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
+ rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg);
+
+ rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 3);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
+ rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg);
+
+ rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
+ rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg);
+
+ /*
+ * We must clear the error counters.
+ * These registers are cleared on read,
+ * so we may pass a useless variable to store the value.
+ */
+ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, &reg);
+ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, &reg);
+ rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, &reg);
+ rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, &reg);
+ rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, &reg);
+
+ return 0;
+}
+
+static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
+{
+ unsigned int i;
+ u32 reg;
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
+ if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
+ return 0;
+
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
+ return -EACCES;
+}
+
+static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
+{
+ unsigned int i;
+ u8 value;
+
+ /*
+ * BBP was enabled after firmware was loaded,
+ * but we need to reactivate it now.
+ */
+ rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+ msleep(1);
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2800usb_bbp_read(rt2x00dev, 0, &value);
+ if ((value != 0xff) && (value != 0x00))
+ return 0;
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
+ return -EACCES;
+}
+
+static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+ unsigned int i;
+ u16 eeprom;
+ u8 reg_id;
+ u8 value;
+
+ if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) ||
+ rt2800usb_wait_bbp_ready(rt2x00dev)))
+ return -EACCES;
+
+ rt2800usb_bbp_write(rt2x00dev, 65, 0x2c);
+ rt2800usb_bbp_write(rt2x00dev, 66, 0x38);
+ rt2800usb_bbp_write(rt2x00dev, 69, 0x12);
+ rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
+ rt2800usb_bbp_write(rt2x00dev, 73, 0x10);
+ rt2800usb_bbp_write(rt2x00dev, 81, 0x37);
+ rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
+ rt2800usb_bbp_write(rt2x00dev, 83, 0x6a);
+ rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
+ rt2800usb_bbp_write(rt2x00dev, 86, 0x00);
+ rt2800usb_bbp_write(rt2x00dev, 91, 0x04);
+ rt2800usb_bbp_write(rt2x00dev, 92, 0x00);
+ rt2800usb_bbp_write(rt2x00dev, 103, 0x00);
+ rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
+
+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
+ rt2800usb_bbp_write(rt2x00dev, 73, 0x12);
+ }
+
+ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) {
+ rt2800usb_bbp_write(rt2x00dev, 84, 0x19);
+ }
+
+ if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+ rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
+ rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
+ rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
+ }
+
+ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+
+ if (eeprom != 0xffff && eeprom != 0x0000) {
+ reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
+ value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
+ rt2800usb_bbp_write(rt2x00dev, reg_id, value);
+ }
+ }
+
+ return 0;
+}
+
+static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev,
+ bool bw40, u8 rfcsr24, u8 filter_target)
+{
+ unsigned int i;
+ u8 bbp;
+ u8 rfcsr;
+ u8 passband;
+ u8 stopband;
+ u8 overtuned = 0;
+
+ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
+
+ rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
+ rt2800usb_bbp_write(rt2x00dev, 4, bbp);
+
+ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
+ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+ /*
+ * Set power & frequency of passband test tone
+ */
+ rt2800usb_bbp_write(rt2x00dev, 24, 0);
+
+ for (i = 0; i < 100; i++) {
+ rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
+ msleep(1);
+
+ rt2800usb_bbp_read(rt2x00dev, 55, &passband);
+ if (passband)
+ break;
+ }
+
+ /*
+ * Set power & frequency of stopband test tone
+ */
+ rt2800usb_bbp_write(rt2x00dev, 24, 0x06);
+
+ for (i = 0; i < 100; i++) {
+ rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
+ msleep(1);
+
+ rt2800usb_bbp_read(rt2x00dev, 55, &stopband);
+
+ if ((passband - stopband) <= filter_target) {
+ rfcsr24++;
+ overtuned += ((passband - stopband) == filter_target);
+ } else
+ break;
+
+ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
+ }
+
+ rfcsr24 -= !!overtuned;
+
+ rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
+ return rfcsr24;
+}
+
+static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev)
+{
+ u8 rfcsr;
+ u8 bbp;
+
+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+ return 0;
+
+ /*
+ * Init RF calibration.
+ */
+ rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
+ msleep(1);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+ rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+ rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40);
+ rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03);
+ rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02);
+ rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70);
+ rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f);
+ rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71);
+ rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21);
+ rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b);
+ rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90);
+ rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58);
+ rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3);
+ rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92);
+ rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c);
+ rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02);
+ rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba);
+ rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb);
+ rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16);
+ rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01);
+ rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03);
+ rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f);
+
+ /*
+ * Set RX Filter calibration for 20MHz and 40MHz
+ */
+ rt2x00dev->calibration[0] =
+ rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
+ rt2x00dev->calibration[1] =
+ rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
+
+ /*
+ * Set back to initial state
+ */
+ rt2800usb_bbp_write(rt2x00dev, 24, 0);
+
+ rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
+ rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+ /*
+ * set BBP back to BW20
+ */
+ rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
+ rt2800usb_bbp_write(rt2x00dev, 4, bbp);
+
+ return 0;
+}
+
+/*
+ * Device state switch handlers.
+ */
+static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
+ u32 reg;
+
+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
+ (state == STATE_RADIO_RX_ON) ||
+ (state == STATE_RADIO_RX_ON_LINK));
+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+}
+
+static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
+{
+ unsigned int i;
+ u32 reg;
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+ if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
+ !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
+ return 0;
+
+ msleep(1);
+ }
+
+ ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
+ return -EACCES;
+}
+
+static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
+{
+ u32 reg;
+ u16 word;
+
+ /*
+ * Initialize all registers.
+ */
+ if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
+ rt2800usb_init_registers(rt2x00dev) ||
+ rt2800usb_init_bbp(rt2x00dev) ||
+ rt2800usb_init_rfcsr(rt2x00dev)))
+ return -EIO;
+
+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+ udelay(50);
+
+ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
+ rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+
+ rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, &reg);
+ rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
+ /* Don't use bulk in aggregation when working with USB 1.1 */
+ rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN,
+ (rt2x00dev->rx->usb_maxpacket == 512));
+ rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
+ /*
+ * Total room for RX frames in kilobytes, PBF might still exceed
+ * this limit so reduce the number to prevent errors.
+ */
+ rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_LIMIT,
+ ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3);
+ rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
+ rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
+ rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+ /*
+ * Initialize LED control
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
+ rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
+ word & 0xff, (word >> 8) & 0xff);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
+ rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
+ word & 0xff, (word >> 8) & 0xff);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
+ rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
+ word & 0xff, (word >> 8) & 0xff);
+
+ return 0;
+}
+
+static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
+{
+ u32 reg;
+
+ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+ rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
+ rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+ rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0);
+
+ /* Wait for DMA, ignore error */
+ rt2800usb_wait_wpdma_ready(rt2x00dev);
+
+ rt2x00usb_disable_radio(rt2x00dev);
+}
+
+static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
+ if (state == STATE_AWAKE)
+ rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
+ else
+ rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+
+ return 0;
+}
+
+static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
+ int retval = 0;
+
+ switch (state) {
+ case STATE_RADIO_ON:
+ /*
+ * Before the radio can be enabled, the device first has
+ * to be woken up. After that it needs a bit of time
+ * to be fully awake and the radio can be enabled.
+ */
+ rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
+ msleep(1);
+ retval = rt2800usb_enable_radio(rt2x00dev);
+ break;
+ case STATE_RADIO_OFF:
+ /*
+ * After the radio has been disablee, the device should
+ * be put to sleep for powersaving.
+ */
+ rt2800usb_disable_radio(rt2x00dev);
+ rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
+ break;
+ case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_ON_LINK:
+ case STATE_RADIO_RX_OFF:
+ case STATE_RADIO_RX_OFF_LINK:
+ rt2800usb_toggle_rx(rt2x00dev, state);
+ break;
+ case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_OFF:
+ /* No support, but no error either */
+ break;
+ case STATE_DEEP_SLEEP:
+ case STATE_SLEEP:
+ case STATE_STANDBY:
+ case STATE_AWAKE:
+ retval = rt2800usb_set_state(rt2x00dev, state);
+ break;
+ default:
+ retval = -ENOTSUPP;
+ break;
+ }
+
+ if (unlikely(retval))
+ ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
+ state, retval);
+
+ return retval;
+}
+
+/*
+ * TX descriptor initialization
+ */
+static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
+ struct sk_buff *skb,
+ struct txentry_desc *txdesc)
+{
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+ __le32 *txi = skbdesc->desc;
+ __le32 *txwi = &txi[TXINFO_DESC_SIZE / sizeof(__le32)];
+ u32 word;
+
+ /*
+ * Initialize TX Info descriptor
+ */
+ rt2x00_desc_read(txwi, 0, &word);
+ rt2x00_set_field32(&word, TXWI_W0_FRAG,
+ test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
+ rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
+ rt2x00_set_field32(&word, TXWI_W0_TS,
+ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_AMPDU,
+ test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
+ rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
+ rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
+ rt2x00_set_field32(&word, TXWI_W0_BW,
+ test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
+ test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
+ rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
+ rt2x00_desc_write(txwi, 0, word);
+
+ rt2x00_desc_read(txwi, 1, &word);
+ rt2x00_set_field32(&word, TXWI_W1_ACK,
+ test_bit(ENTRY_TXD_ACK, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W1_NSEQ,
+ test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
+ rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
+ rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
+ test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
+ txdesc->key_idx : 0xff);
+ rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
+ skb->len - txdesc->l2pad);
+ rt2x00_set_field32(&word, TXWI_W1_PACKETID,
+ skbdesc->entry->entry_idx);
+ rt2x00_desc_write(txwi, 1, word);
+
+ /*
+ * Always write 0 to IV/EIV fields, hardware will insert the IV
+ * from the IVEIV register when TXINFO_W0_WIV is set to 0.
+ * When TXINFO_W0_WIV is set to 1 it will use the IV data
+ * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
+ * crypto entry in the registers should be used to encrypt the frame.
+ */
+ _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
+ _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+
+ /*
+ * Initialize TX descriptor
+ */
+ rt2x00_desc_read(txi, 0, &word);
+ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
+ skb->len + TXWI_DESC_SIZE);
+ rt2x00_set_field32(&word, TXINFO_W0_WIV,
+ !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
+ rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
+ rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
+ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
+ rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
+ test_bit(ENTRY_TXD_BURST, &txdesc->flags));
+ rt2x00_desc_write(txi, 0, word);
+}
+
+/*
+ * TX data initialization
+ */
+static void rt2800usb_write_beacon(struct queue_entry *entry)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ unsigned int beacon_base;
+ u32 reg;
+
+ /*
+ * Add the descriptor in front of the skb.
+ */
+ skb_push(entry->skb, entry->queue->desc_size);
+ memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
+ skbdesc->desc = entry->skb->data;
+
+ /*
+ * Disable beaconing while we are reloading the beacon data,
+ * otherwise we might be sending out invalid data.
+ */
+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+ /*
+ * Write entire beacon with descriptor to register.
+ */
+ beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, beacon_base,
+ entry->skb->data, entry->skb->len,
+ REGISTER_TIMEOUT32(entry->skb->len));
+
+ /*
+ * Clean up the beacon skb.
+ */
+ dev_kfree_skb(entry->skb);
+ entry->skb = NULL;
+}
+
+static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
+{
+ int length;
+
+ /*
+ * The length _must_ include 4 bytes padding,
+ * it should always be multiple of 4,
+ * but it must _not_ be a multiple of the USB packet size.
+ */
+ length = roundup(entry->skb->len + 4, 4);
+ length += (4 * !(length % entry->queue->usb_maxpacket));
+
+ return length;
+}
+
+static void rt2800usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
+ const enum data_queue_qid queue)
+{
+ u32 reg;
+
+ if (queue != QID_BEACON) {
+ rt2x00usb_kick_tx_queue(rt2x00dev, queue);
+ return;
+ }
+
+ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
+ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ }
+}
+
+/*
+ * RX control handlers
+ */
+static void rt2800usb_fill_rxdone(struct queue_entry *entry,
+ struct rxdone_entry_desc *rxdesc)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ __le32 *rxd = (__le32 *)entry->skb->data;
+ __le32 *rxwi;
+ u32 rxd0;
+ u32 rxwi0;
+ u32 rxwi1;
+ u32 rxwi2;
+ u32 rxwi3;
+
+ /*
+ * Copy descriptor to the skbdesc->desc buffer, making it safe from
+ * moving of frame data in rt2x00usb.
+ */
+ memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
+ rxd = (__le32 *)skbdesc->desc;
+ rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)];
+
+ /*
+ * It is now safe to read the descriptor on all architectures.
+ */
+ rt2x00_desc_read(rxd, 0, &rxd0);
+ rt2x00_desc_read(rxwi, 0, &rxwi0);
+ rt2x00_desc_read(rxwi, 1, &rxwi1);
+ rt2x00_desc_read(rxwi, 2, &rxwi2);
+ rt2x00_desc_read(rxwi, 3, &rxwi3);
+
+ if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
+ rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+ rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
+ rxdesc->cipher_status =
+ rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
+ }
+
+ if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) {
+ /*
+ * Hardware has stripped IV/EIV data from 802.11 frame during
+ * decryption. Unfortunately the descriptor doesn't contain
+ * any fields with the EIV/IV data either, so they can't
+ * be restored by rt2x00lib.
+ */
+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+ rxdesc->flags |= RX_FLAG_DECRYPTED;
+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+ }
+
+ if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
+ rxdesc->dev_flags |= RXDONE_MY_BSS;
+
+ if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD))
+ rxdesc->dev_flags |= RXDONE_L2PAD;
+
+ if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
+ rxdesc->flags |= RX_FLAG_SHORT_GI;
+
+ if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
+ rxdesc->flags |= RX_FLAG_40MHZ;
+
+ /*
+ * Detect RX rate, always use MCS as signal type.
+ */
+ rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
+ rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
+ rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
+
+ /*
+ * Mask of 0x8 bit to remove the short preamble flag.
+ */
+ if (rxdesc->rate_mode == RATE_MODE_CCK)
+ rxdesc->signal &= ~0x8;
+
+ rxdesc->rssi =
+ (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
+ rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
+
+ rxdesc->noise =
+ (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) +
+ rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2;
+
+ rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+
+ /*
+ * Remove RXWI descriptor from start of buffer.
+ */
+ skb_pull(entry->skb, skbdesc->desc_len);
+ skb_trim(entry->skb, rxdesc->size);
+}
+
+/*
+ * Device probe functions.
+ */
+static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+ u16 word;
+ u8 *mac;
+ u8 default_lna_gain;
+
+ rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
+
+ /*
+ * Start validation of the data that has been read.
+ */
+ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
+ if (!is_valid_ether_addr(mac)) {
+ DECLARE_MAC_BUF(macbuf);
+
+ random_ether_addr(mac);
+ EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+ EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
+ } else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
+ /*
+ * There is a max of 2 RX streams for RT2870 series
+ */
+ if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
+ EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
+ if ((word & 0x00ff) == 0x00ff) {
+ rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
+ rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
+ LED_MODE_TXRX_ACTIVITY);
+ rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
+ EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
+ }
+
+ /*
+ * During the LNA validation we are going to use
+ * lna0 as correct value. Note that EEPROM_LNA
+ * is never validated.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
+ default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
+ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
+ rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
+ if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
+ default_lna_gain);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
+ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
+ rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
+ if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
+ if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
+ rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
+ default_lna_gain);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
+
+ return 0;
+}
+
+static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+ u32 reg;
+ u16 value;
+ u16 eeprom;
+
+ /*
+ * Read EEPROM word for configuration.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+ /*
+ * Identify RF chipset.
+ */
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+ rt2x00_set_chip(rt2x00dev, RT2870, value, reg);
+
+ /*
+ * The check for rt2860 is not a typo, some rt2870 hardware
+ * identifies itself as rt2860 in the CSR register.
+ */
+ if (!rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28600000) &&
+ !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28700000) &&
+ !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28800000) &&
+ !rt2x00_check_rev(&rt2x00dev->chip, 0xffff0000, 0x30700000)) {
+ ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
+ return -ENODEV;
+ }
+
+ if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Identify default antenna configuration.
+ */
+ rt2x00dev->default_ant.tx =
+ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH);
+ rt2x00dev->default_ant.rx =
+ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH);
+
+ /*
+ * Read frequency offset and RF programming sequence.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
+ rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
+
+ /*
+ * Read external LNA informations.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
+
+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
+ __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
+ __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
+
+ /*
+ * Detect if this device has an hardware controlled radio.
+ */
+#ifdef CONFIG_RT2X00_LIB_RFKILL
+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
+ __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
+
+ /*
+ * Store led settings, for correct led behaviour.
+ */
+#ifdef CONFIG_RT2X00_LIB_LEDS
+ rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+ rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
+ rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ,
+ &rt2x00dev->led_mcu_reg);
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+ return 0;
+}
+
+/*
+ * RF value list for rt2870
+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
+ */
+static const struct rf_channel rf_vals[] = {
+ { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
+ { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
+ { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
+ { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
+ { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
+ { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
+ { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
+ { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
+ { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
+ { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
+ { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
+ { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
+ { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
+ { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
+
+ /* 802.11 UNI / HyperLan 2 */
+ { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
+ { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
+ { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
+ { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
+ { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
+ { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
+ { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
+ { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
+ { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
+ { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
+ { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
+ { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
+
+ /* 802.11 HyperLan 2 */
+ { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
+ { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
+ { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
+ { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
+ { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
+ { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
+ { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
+ { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
+ { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
+ { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
+ { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
+ { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
+ { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
+ { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
+ { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
+ { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
+
+ /* 802.11 UNII */
+ { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
+ { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
+ { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
+ { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
+ { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
+ { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
+ { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
+ { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
+ { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
+ { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
+ { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
+
+ /* 802.11 Japan */
+ { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
+ { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
+ { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
+ { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
+ { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
+ { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
+ { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
+};
+
+/*
+ * RF value list for rt3070
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_3070[] = {
+ {1, 241, 2, 2 },
+ {2, 241, 2, 7 },
+ {3, 242, 2, 2 },
+ {4, 242, 2, 7 },
+ {5, 243, 2, 2 },
+ {6, 243, 2, 7 },
+ {7, 244, 2, 2 },
+ {8, 244, 2, 7 },
+ {9, 245, 2, 2 },
+ {10, 245, 2, 7 },
+ {11, 246, 2, 2 },
+ {12, 246, 2, 7 },
+ {13, 247, 2, 2 },
+ {14, 248, 2, 4 },
+};
+
+static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+{
+ struct hw_mode_spec *spec = &rt2x00dev->spec;
+ struct channel_info *info;
+ char *tx_power1;
+ char *tx_power2;
+ unsigned int i;
+ u16 eeprom;
+
+ /*
+ * Initialize all hw fields.
+ */
+ rt2x00dev->hw->flags =
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_SUPPORTS_PS |
+ IEEE80211_HW_PS_NULLFUNC_STACK;
+ rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
+
+ SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
+ SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
+ rt2x00_eeprom_addr(rt2x00dev,
+ EEPROM_MAC_ADDR_0));
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+ /*
+ * Initialize HT information.
+ */
+ spec->ht.ht_supported = true;
+ spec->ht.cap =
+ IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+ IEEE80211_HT_CAP_GRN_FLD |
+ IEEE80211_HT_CAP_SGI_20 |
+ IEEE80211_HT_CAP_SGI_40 |
+ IEEE80211_HT_CAP_TX_STBC |
+ IEEE80211_HT_CAP_RX_STBC |
+ IEEE80211_HT_CAP_PSMP_SUPPORT;
+ spec->ht.ampdu_factor = 3;
+ spec->ht.ampdu_density = 4;
+ spec->ht.mcs.tx_params =
+ IEEE80211_HT_MCS_TX_DEFINED |
+ IEEE80211_HT_MCS_TX_RX_DIFF |
+ ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
+ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+
+ switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
+ case 3:
+ spec->ht.mcs.rx_mask[2] = 0xff;
+ case 2:
+ spec->ht.mcs.rx_mask[1] = 0xff;
+ case 1:
+ spec->ht.mcs.rx_mask[0] = 0xff;
+ spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
+ break;
+ }
+
+ /*
+ * Initialize hw_mode information.
+ */
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
+
+ if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
+ rt2x00_rf(&rt2x00dev->chip, RF2720)) {
+ spec->num_channels = 14;
+ spec->channels = rf_vals;
+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
+ rt2x00_rf(&rt2x00dev->chip, RF2750)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
+ spec->num_channels = ARRAY_SIZE(rf_vals);
+ spec->channels = rf_vals;
+ } else if (rt2x00_rf(&rt2x00dev->chip, RF3020) ||
+ rt2x00_rf(&rt2x00dev->chip, RF2020)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_3070);
+ spec->channels = rf_vals_3070;
+ }
+
+ /*
+ * Create channel information array
+ */
+ info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
+ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
+
+ for (i = 0; i < 14; i++) {
+ info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
+ info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
+ }
+
+ if (spec->num_channels > 14) {
+ tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
+ tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
+
+ for (i = 14; i < spec->num_channels; i++) {
+ info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
+ info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+ int retval;
+
+ /*
+ * Allocate eeprom data.
+ */
+ retval = rt2800usb_validate_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ retval = rt2800usb_init_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * Initialize hw specifications.
+ */
+ retval = rt2800usb_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * This device requires firmware.
+ */
+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
+ if (!modparam_nohwcrypt)
+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+
+ /*
+ * Set the rssi offset.
+ */
+ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+ return 0;
+}
+
+/*
+ * IEEE80211 stack callback functions.
+ */
+static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
+ u32 *iv32, u16 *iv16)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct mac_iveiv_entry iveiv_entry;
+ u32 offset;
+
+ offset = MAC_IVEIV_ENTRY(hw_key_idx);
+ rt2x00usb_register_multiread(rt2x00dev, offset,
+ &iveiv_entry, sizeof(iveiv_entry));
+
+ memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
+ memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
+}
+
+static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ u32 reg;
+ bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
+
+ rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
+ rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
+ rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+ return 0;
+}
+
+static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct data_queue *queue;
+ struct rt2x00_field32 field;
+ int retval;
+ u32 reg;
+ u32 offset;
+
+ /*
+ * First pass the configuration through rt2x00lib, that will
+ * update the queue settings and validate the input. After that
+ * we are free to update the registers based on the value
+ * in the queue parameter.
+ */
+ retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+ if (retval)
+ return retval;
+
+ /*
+ * We only need to perform additional register initialization
+ * for WMM queues/
+ */
+ if (queue_idx >= 4)
+ return 0;
+
+ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+ /* Update WMM TXOP register */
+ offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
+ field.bit_offset = (queue_idx & 1) * 16;
+ field.bit_mask = 0xffff << field.bit_offset;
+
+ rt2x00usb_register_read(rt2x00dev, offset, &reg);
+ rt2x00_set_field32(&reg, field, queue->txop);
+ rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+ /* Update WMM registers */
+ field.bit_offset = queue_idx * 4;
+ field.bit_mask = 0xf << field.bit_offset;
+
+ rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
+ rt2x00_set_field32(&reg, field, queue->aifs);
+ rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
+ rt2x00_set_field32(&reg, field, queue->cw_min);
+ rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
+
+ rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
+ rt2x00_set_field32(&reg, field, queue->cw_max);
+ rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
+
+ /* Update EDCA registers */
+ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
+
+ rt2x00usb_register_read(rt2x00dev, offset, &reg);
+ rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
+ rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
+ rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
+ rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
+ rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+ return 0;
+}
+
+static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ u64 tsf;
+ u32 reg;
+
+ rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
+ tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
+ rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
+ tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
+
+ return tsf;
+}
+
+static const struct ieee80211_ops rt2800usb_mac80211_ops = {
+ .tx = rt2x00mac_tx,
+ .start = rt2x00mac_start,
+ .stop = rt2x00mac_stop,
+ .add_interface = rt2x00mac_add_interface,
+ .remove_interface = rt2x00mac_remove_interface,
+ .config = rt2x00mac_config,
+ .configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
+ .get_stats = rt2x00mac_get_stats,
+ .get_tkip_seq = rt2800usb_get_tkip_seq,
+ .set_rts_threshold = rt2800usb_set_rts_threshold,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt2800usb_conf_tx,
+ .get_tx_stats = rt2x00mac_get_tx_stats,
+ .get_tsf = rt2800usb_get_tsf,
+};
+
+static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
+ .probe_hw = rt2800usb_probe_hw,
+ .get_firmware_name = rt2800usb_get_firmware_name,
+ .check_firmware = rt2800usb_check_firmware,
+ .load_firmware = rt2800usb_load_firmware,
+ .initialize = rt2x00usb_initialize,
+ .uninitialize = rt2x00usb_uninitialize,
+ .clear_entry = rt2x00usb_clear_entry,
+ .set_device_state = rt2800usb_set_device_state,
+ .rfkill_poll = rt2800usb_rfkill_poll,
+ .link_stats = rt2800usb_link_stats,
+ .reset_tuner = rt2800usb_reset_tuner,
+ .link_tuner = rt2800usb_link_tuner,
+ .write_tx_desc = rt2800usb_write_tx_desc,
+ .write_tx_data = rt2x00usb_write_tx_data,
+ .write_beacon = rt2800usb_write_beacon,
+ .get_tx_data_len = rt2800usb_get_tx_data_len,
+ .kick_tx_queue = rt2800usb_kick_tx_queue,
+ .kill_tx_queue = rt2x00usb_kill_tx_queue,
+ .fill_rxdone = rt2800usb_fill_rxdone,
+ .config_shared_key = rt2800usb_config_shared_key,
+ .config_pairwise_key = rt2800usb_config_pairwise_key,
+ .config_filter = rt2800usb_config_filter,
+ .config_intf = rt2800usb_config_intf,
+ .config_erp = rt2800usb_config_erp,
+ .config_ant = rt2800usb_config_ant,
+ .config = rt2800usb_config,
+};
+
+static const struct data_queue_desc rt2800usb_queue_rx = {
+ .entry_num = RX_ENTRIES,
+ .data_size = AGGREGATION_SIZE,
+ .desc_size = RXD_DESC_SIZE + RXWI_DESC_SIZE,
+ .priv_size = sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct data_queue_desc rt2800usb_queue_tx = {
+ .entry_num = TX_ENTRIES,
+ .data_size = AGGREGATION_SIZE,
+ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
+ .priv_size = sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct data_queue_desc rt2800usb_queue_bcn = {
+ .entry_num = 8 * BEACON_ENTRIES,
+ .data_size = MGMT_FRAME_SIZE,
+ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
+ .priv_size = sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct rt2x00_ops rt2800usb_ops = {
+ .name = KBUILD_MODNAME,
+ .max_sta_intf = 1,
+ .max_ap_intf = 8,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .rx = &rt2800usb_queue_rx,
+ .tx = &rt2800usb_queue_tx,
+ .bcn = &rt2800usb_queue_bcn,
+ .lib = &rt2800usb_rt2x00_ops,
+ .hw = &rt2800usb_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+ .debugfs = &rt2800usb_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
+/*
+ * rt2800usb module information.
+ */
+static struct usb_device_id rt2800usb_device_table[] = {
+ /* ??? */
+ { USB_DEVICE(0x177f, 0x0302), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Abocom */
+ { USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* AirTies */
+ { USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Amigo */
+ { USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Amit */
+ { USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* ASUS */
+ { USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* AzureWave */
+ { USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Belkin */
+ { USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x050d, 0x815c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Buffalo */
+ { USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Conceptronic */
+ { USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c08), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x14b2, 0x3c28), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Corega */
+ { USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* D-Link */
+ { USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Edimax */
+ { USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* EnGenius */
+ { USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Gemtek */
+ { USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Gigabyte */
+ { USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1044, 0x800c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Hawking */
+ { USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* LevelOne */
+ { USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Linksys */
+ { USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Logitec */
+ { USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Motorola */
+ { USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Ovislink */
+ { USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Pegatron */
+ { USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Philips */
+ { USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Planex */
+ { USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Qcom */
+ { USB_DEVICE(0x18e8, 0x6259), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Quanta */
+ { USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Ralink */
+ { USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Samsung */
+ { USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Siemens */
+ { USB_DEVICE(0x129b, 0x1828), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Sitecom */
+ { USB_DEVICE(0x0df6, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x002b), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x002c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x002d), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x003b), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x003d), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* SMC */
+ { USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Sparklan */
+ { USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* U-Media*/
+ { USB_DEVICE(0x157e, 0x300e), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* ZCOM */
+ { USB_DEVICE(0x0cde, 0x0022), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0cde, 0x0025), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Zinwell */
+ { USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
+ /* Zyxel */
+ { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x0586, 0x341a), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { 0, }
+};
+
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver.");
+MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards");
+MODULE_DEVICE_TABLE(usb, rt2800usb_device_table);
+MODULE_FIRMWARE(FIRMWARE_RT2870);
+MODULE_LICENSE("GPL");
+
+static struct usb_driver rt2800usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = rt2800usb_device_table,
+ .probe = rt2x00usb_probe,
+ .disconnect = rt2x00usb_disconnect,
+ .suspend = rt2x00usb_suspend,
+ .resume = rt2x00usb_resume,
+};
+
+static int __init rt2800usb_init(void)
+{
+ return usb_register(&rt2800usb_driver);
+}
+
+static void __exit rt2800usb_exit(void)
+{
+ usb_deregister(&rt2800usb_driver);
+}
+
+module_init(rt2800usb_init);
+module_exit(rt2800usb_exit);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
new file mode 100644
index 00000000000..61a8be61d3f
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -0,0 +1,1945 @@
+/*
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2800usb
+ Abstract: Data structures and registers for the rt2800usb module.
+ Supported chipsets: RT2800U.
+ */
+
+#ifndef RT2800USB_H
+#define RT2800USB_H
+
+/*
+ * RF chip defines.
+ *
+ * RF2820 2.4G 2T3R
+ * RF2850 2.4G/5G 2T3R
+ * RF2720 2.4G 1T2R
+ * RF2750 2.4G/5G 1T2R
+ * RF3020 2.4G 1T1R
+ * RF2020 2.4G B/G
+ */
+#define RF2820 0x0001
+#define RF2850 0x0002
+#define RF2720 0x0003
+#define RF2750 0x0004
+#define RF3020 0x0005
+#define RF2020 0x0006
+
+/*
+ * RT2870 version
+ */
+#define RT2860C_VERSION 0x28600100
+#define RT2860D_VERSION 0x28600101
+#define RT2880E_VERSION 0x28720200
+#define RT2883_VERSION 0x28830300
+#define RT3070_VERSION 0x30700200
+
+/*
+ * Signal information.
+ * Defaul offset is required for RSSI <-> dBm conversion.
+ */
+#define DEFAULT_RSSI_OFFSET 120 /* FIXME */
+
+/*
+ * Register layout information.
+ */
+#define CSR_REG_BASE 0x1000
+#define CSR_REG_SIZE 0x0800
+#define EEPROM_BASE 0x0000
+#define EEPROM_SIZE 0x0110
+#define BBP_BASE 0x0000
+#define BBP_SIZE 0x0080
+#define RF_BASE 0x0004
+#define RF_SIZE 0x0010
+
+/*
+ * Number of TX queues.
+ */
+#define NUM_TX_QUEUES 4
+
+/*
+ * USB registers.
+ */
+
+/*
+ * HOST-MCU shared memory
+ */
+#define HOST_CMD_CSR 0x0404
+#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff)
+
+/*
+ * INT_SOURCE_CSR: Interrupt source register.
+ * Write one to clear corresponding bit.
+ * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
+ */
+#define INT_SOURCE_CSR 0x0200
+#define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001)
+#define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002)
+#define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004)
+#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008)
+#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010)
+#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020)
+#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040)
+#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
+#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
+#define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200)
+#define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400)
+#define INT_SOURCE_CSR_TBTT FIELD32(0x00000800)
+#define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000)
+#define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
+#define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000)
+#define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000)
+#define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000)
+#define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000)
+
+/*
+ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
+ */
+#define INT_MASK_CSR 0x0204
+#define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001)
+#define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002)
+#define INT_MASK_CSR_RX_DONE FIELD32(0x00000004)
+#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008)
+#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010)
+#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020)
+#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040)
+#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080)
+#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100)
+#define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200)
+#define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400)
+#define INT_MASK_CSR_TBTT FIELD32(0x00000800)
+#define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000)
+#define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000)
+#define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000)
+#define INT_MASK_CSR_GPTIMER FIELD32(0x00008000)
+#define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000)
+#define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000)
+
+/*
+ * WPDMA_GLO_CFG
+ */
+#define WPDMA_GLO_CFG 0x0208
+#define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001)
+#define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002)
+#define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004)
+#define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008)
+#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030)
+#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040)
+#define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080)
+#define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00)
+#define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000)
+
+/*
+ * WPDMA_RST_IDX
+ */
+#define WPDMA_RST_IDX 0x020c
+#define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001)
+#define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002)
+#define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004)
+#define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008)
+#define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010)
+#define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020)
+#define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000)
+
+/*
+ * DELAY_INT_CFG
+ */
+#define DELAY_INT_CFG 0x0210
+#define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff)
+#define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00)
+#define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000)
+#define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000)
+#define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000)
+#define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000)
+
+/*
+ * WMM_AIFSN_CFG: Aifsn for each EDCA AC
+ * AIFSN0: AC_BE
+ * AIFSN1: AC_BK
+ * AIFSN1: AC_VI
+ * AIFSN1: AC_VO
+ */
+#define WMM_AIFSN_CFG 0x0214
+#define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f)
+#define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0)
+#define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00)
+#define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMIN_CSR: CWmin for each EDCA AC
+ * CWMIN0: AC_BE
+ * CWMIN1: AC_BK
+ * CWMIN1: AC_VI
+ * CWMIN1: AC_VO
+ */
+#define WMM_CWMIN_CFG 0x0218
+#define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f)
+#define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0)
+#define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00)
+#define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMAX_CSR: CWmax for each EDCA AC
+ * CWMAX0: AC_BE
+ * CWMAX1: AC_BK
+ * CWMAX1: AC_VI
+ * CWMAX1: AC_VO
+ */
+#define WMM_CWMAX_CFG 0x021c
+#define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f)
+#define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0)
+#define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00)
+#define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000)
+
+/*
+ * AC_TXOP0: AC_BK/AC_BE TXOP register
+ * AC0TXOP: AC_BK in unit of 32us
+ * AC1TXOP: AC_BE in unit of 32us
+ */
+#define WMM_TXOP0_CFG 0x0220
+#define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff)
+#define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000)
+
+/*
+ * AC_TXOP1: AC_VO/AC_VI TXOP register
+ * AC2TXOP: AC_VI in unit of 32us
+ * AC3TXOP: AC_VO in unit of 32us
+ */
+#define WMM_TXOP1_CFG 0x0224
+#define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff)
+#define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000)
+
+/*
+ * GPIO_CTRL_CFG:
+ */
+#define GPIO_CTRL_CFG 0x0228
+#define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001)
+#define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002)
+#define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004)
+#define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008)
+#define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010)
+#define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020)
+#define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040)
+#define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080)
+#define GPIO_CTRL_CFG_BIT8 FIELD32(0x00000100)
+
+/*
+ * MCU_CMD_CFG
+ */
+#define MCU_CMD_CFG 0x022c
+
+/*
+ * AC_BK register offsets
+ */
+#define TX_BASE_PTR0 0x0230
+#define TX_MAX_CNT0 0x0234
+#define TX_CTX_IDX0 0x0238
+#define TX_DTX_IDX0 0x023c
+
+/*
+ * AC_BE register offsets
+ */
+#define TX_BASE_PTR1 0x0240
+#define TX_MAX_CNT1 0x0244
+#define TX_CTX_IDX1 0x0248
+#define TX_DTX_IDX1 0x024c
+
+/*
+ * AC_VI register offsets
+ */
+#define TX_BASE_PTR2 0x0250
+#define TX_MAX_CNT2 0x0254
+#define TX_CTX_IDX2 0x0258
+#define TX_DTX_IDX2 0x025c
+
+/*
+ * AC_VO register offsets
+ */
+#define TX_BASE_PTR3 0x0260
+#define TX_MAX_CNT3 0x0264
+#define TX_CTX_IDX3 0x0268
+#define TX_DTX_IDX3 0x026c
+
+/*
+ * HCCA register offsets
+ */
+#define TX_BASE_PTR4 0x0270
+#define TX_MAX_CNT4 0x0274
+#define TX_CTX_IDX4 0x0278
+#define TX_DTX_IDX4 0x027c
+
+/*
+ * MGMT register offsets
+ */
+#define TX_BASE_PTR5 0x0280
+#define TX_MAX_CNT5 0x0284
+#define TX_CTX_IDX5 0x0288
+#define TX_DTX_IDX5 0x028c
+
+/*
+ * RX register offsets
+ */
+#define RX_BASE_PTR 0x0290
+#define RX_MAX_CNT 0x0294
+#define RX_CRX_IDX 0x0298
+#define RX_DRX_IDX 0x029c
+
+/*
+ * USB_DMA_CFG
+ * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
+ * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
+ * PHY_CLEAR: phy watch dog enable.
+ * TX_CLEAR: Clear USB DMA TX path.
+ * TXOP_HALT: Halt TXOP count down when TX buffer is full.
+ * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation.
+ * RX_BULK_EN: Enable USB DMA Rx.
+ * TX_BULK_EN: Enable USB DMA Tx.
+ * EP_OUT_VALID: OUT endpoint data valid.
+ * RX_BUSY: USB DMA RX FSM busy.
+ * TX_BUSY: USB DMA TX FSM busy.
+ */
+#define USB_DMA_CFG 0x02a0
+#define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff)
+#define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00)
+#define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000)
+#define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000)
+#define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000)
+#define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000)
+#define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000)
+#define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000)
+#define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000)
+#define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000)
+#define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000)
+
+/*
+ * USB_CYC_CFG
+ */
+#define USB_CYC_CFG 0x02a4
+#define USB_CYC_CFG_CLOCK_CYCLE FIELD32(0x000000ff)
+
+/*
+ * PBF_SYS_CTRL
+ * HOST_RAM_WRITE: enable Host program ram write selection
+ */
+#define PBF_SYS_CTRL 0x0400
+#define PBF_SYS_CTRL_READY FIELD32(0x00000080)
+#define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define PBF_CFG 0x0408
+#define PBF_MAX_PCNT 0x040c
+#define PBF_CTRL 0x0410
+#define PBF_INT_STA 0x0414
+#define PBF_INT_ENA 0x0418
+
+/*
+ * BCN_OFFSET0:
+ */
+#define BCN_OFFSET0 0x042c
+#define BCN_OFFSET0_BCN0 FIELD32(0x000000ff)
+#define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00)
+#define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000)
+#define BCN_OFFSET0_BCN3 FIELD32(0xff000000)
+
+/*
+ * BCN_OFFSET1:
+ */
+#define BCN_OFFSET1 0x0430
+#define BCN_OFFSET1_BCN4 FIELD32(0x000000ff)
+#define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00)
+#define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000)
+#define BCN_OFFSET1_BCN7 FIELD32(0xff000000)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define TXRXQ_PCNT 0x0438
+#define PBF_DBG 0x043c
+
+/*
+ * RF registers
+ */
+#define RF_CSR_CFG 0x0500
+#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
+#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00)
+#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
+#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
+
+/*
+ * MAC Control/Status Registers(CSR).
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+
+/*
+ * MAC_CSR0: ASIC revision number.
+ * ASIC_REV: 0
+ * ASIC_VER: 2870
+ */
+#define MAC_CSR0 0x1000
+#define MAC_CSR0_ASIC_REV FIELD32(0x0000ffff)
+#define MAC_CSR0_ASIC_VER FIELD32(0xffff0000)
+
+/*
+ * MAC_SYS_CTRL:
+ */
+#define MAC_SYS_CTRL 0x1004
+#define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001)
+#define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002)
+#define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004)
+#define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008)
+#define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010)
+#define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020)
+#define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040)
+#define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080)
+
+/*
+ * MAC_ADDR_DW0: STA MAC register 0
+ */
+#define MAC_ADDR_DW0 0x1008
+#define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff)
+#define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00)
+#define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000)
+#define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000)
+
+/*
+ * MAC_ADDR_DW1: STA MAC register 1
+ * UNICAST_TO_ME_MASK:
+ * Used to mask off bits from byte 5 of the MAC address
+ * to determine the UNICAST_TO_ME bit for RX frames.
+ * The full mask is complemented by BSS_ID_MASK:
+ * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
+ */
+#define MAC_ADDR_DW1 0x100c
+#define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff)
+#define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00)
+#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
+
+/*
+ * MAC_BSSID_DW0: BSSID register 0
+ */
+#define MAC_BSSID_DW0 0x1010
+#define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff)
+#define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00)
+#define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000)
+#define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000)
+
+/*
+ * MAC_BSSID_DW1: BSSID register 1
+ * BSS_ID_MASK:
+ * 0: 1-BSSID mode (BSS index = 0)
+ * 1: 2-BSSID mode (BSS index: Byte5, bit 0)
+ * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
+ * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
+ * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
+ * BSSID. This will make sure that those bits will be ignored
+ * when determining the MY_BSS of RX frames.
+ */
+#define MAC_BSSID_DW1 0x1014
+#define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff)
+#define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00)
+#define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000)
+#define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000)
+
+/*
+ * MAX_LEN_CFG: Maximum frame length register.
+ * MAX_MPDU: rt2860b max 16k bytes
+ * MAX_PSDU: Maximum PSDU length
+ * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
+ */
+#define MAX_LEN_CFG 0x1018
+#define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff)
+#define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000)
+#define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000)
+#define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000)
+
+/*
+ * BBP_CSR_CFG: BBP serial control register
+ * VALUE: Register value to program into BBP
+ * REG_NUM: Selected BBP register
+ * READ_CONTROL: 0 write BBP, 1 read BBP
+ * BUSY: ASIC is busy executing BBP commands
+ * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
+ * BBP_RW_MODE: 0 serial, 1 paralell
+ */
+#define BBP_CSR_CFG 0x101c
+#define BBP_CSR_CFG_VALUE FIELD32(0x000000ff)
+#define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00)
+#define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000)
+#define BBP_CSR_CFG_BUSY FIELD32(0x00020000)
+#define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000)
+#define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000)
+
+/*
+ * RF_CSR_CFG0: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * BITWIDTH: Selected RF register
+ * STANDBYMODE: 0 high when standby, 1 low when standby
+ * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
+ * BUSY: ASIC is busy executing RF commands
+ */
+#define RF_CSR_CFG0 0x1020
+#define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff)
+#define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000)
+#define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff)
+#define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000)
+#define RF_CSR_CFG0_SEL FIELD32(0x40000000)
+#define RF_CSR_CFG0_BUSY FIELD32(0x80000000)
+
+/*
+ * RF_CSR_CFG1: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
+ * 0: 3 system clock cycle (37.5usec)
+ * 1: 5 system clock cycle (62.5usec)
+ */
+#define RF_CSR_CFG1 0x1024
+#define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff)
+#define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000)
+
+/*
+ * RF_CSR_CFG2: RF control register
+ * VALUE: Register value to program into RF
+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
+ * 0: 3 system clock cycle (37.5usec)
+ * 1: 5 system clock cycle (62.5usec)
+ */
+#define RF_CSR_CFG2 0x1028
+#define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff)
+
+/*
+ * LED_CFG: LED control
+ * color LED's:
+ * 0: off
+ * 1: blinking upon TX2
+ * 2: periodic slow blinking
+ * 3: always on
+ * LED polarity:
+ * 0: active low
+ * 1: active high
+ */
+#define LED_CFG 0x102c
+#define LED_CFG_ON_PERIOD FIELD32(0x000000ff)
+#define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00)
+#define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000)
+#define LED_CFG_R_LED_MODE FIELD32(0x03000000)
+#define LED_CFG_G_LED_MODE FIELD32(0x0c000000)
+#define LED_CFG_Y_LED_MODE FIELD32(0x30000000)
+#define LED_CFG_LED_POLAR FIELD32(0x40000000)
+
+/*
+ * XIFS_TIME_CFG: MAC timing
+ * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
+ * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
+ * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
+ * when MAC doesn't reference BBP signal BBRXEND
+ * EIFS: unit 1us
+ * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
+ *
+ */
+#define XIFS_TIME_CFG 0x1100
+#define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff)
+#define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00)
+#define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000)
+#define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000)
+#define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000)
+
+/*
+ * BKOFF_SLOT_CFG:
+ */
+#define BKOFF_SLOT_CFG 0x1104
+#define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff)
+#define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00)
+
+/*
+ * NAV_TIME_CFG:
+ */
+#define NAV_TIME_CFG 0x1108
+#define NAV_TIME_CFG_SIFS FIELD32(0x000000ff)
+#define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00)
+#define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000)
+#define NAV_TIME_ZERO_SIFS FIELD32(0x02000000)
+
+/*
+ * CH_TIME_CFG: count as channel busy
+ */
+#define CH_TIME_CFG 0x110c
+
+/*
+ * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
+ */
+#define PBF_LIFE_TIMER 0x1110
+
+/*
+ * BCN_TIME_CFG:
+ * BEACON_INTERVAL: in unit of 1/16 TU
+ * TSF_TICKING: Enable TSF auto counting
+ * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
+ * BEACON_GEN: Enable beacon generator
+ */
+#define BCN_TIME_CFG 0x1114
+#define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff)
+#define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000)
+#define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000)
+#define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000)
+#define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000)
+#define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000)
+
+/*
+ * TBTT_SYNC_CFG:
+ */
+#define TBTT_SYNC_CFG 0x1118
+
+/*
+ * TSF_TIMER_DW0: Local lsb TSF timer, read-only
+ */
+#define TSF_TIMER_DW0 0x111c
+#define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff)
+
+/*
+ * TSF_TIMER_DW1: Local msb TSF timer, read-only
+ */
+#define TSF_TIMER_DW1 0x1120
+#define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff)
+
+/*
+ * TBTT_TIMER: TImer remains till next TBTT, read-only
+ */
+#define TBTT_TIMER 0x1124
+
+/*
+ * INT_TIMER_CFG:
+ */
+#define INT_TIMER_CFG 0x1128
+
+/*
+ * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
+ */
+#define INT_TIMER_EN 0x112c
+
+/*
+ * CH_IDLE_STA: channel idle time
+ */
+#define CH_IDLE_STA 0x1130
+
+/*
+ * CH_BUSY_STA: channel busy time
+ */
+#define CH_BUSY_STA 0x1134
+
+/*
+ * MAC_STATUS_CFG:
+ * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
+ * if 1 or higher one of the 2 registers is busy.
+ */
+#define MAC_STATUS_CFG 0x1200
+#define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003)
+
+/*
+ * PWR_PIN_CFG:
+ */
+#define PWR_PIN_CFG 0x1204
+
+/*
+ * AUTOWAKEUP_CFG: Manual power control / status register
+ * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
+ * AUTOWAKE: 0:sleep, 1:awake
+ */
+#define AUTOWAKEUP_CFG 0x1208
+#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff)
+#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00)
+#define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000)
+
+/*
+ * EDCA_AC0_CFG:
+ */
+#define EDCA_AC0_CFG 0x1300
+#define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff)
+#define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00)
+#define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000)
+#define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC1_CFG:
+ */
+#define EDCA_AC1_CFG 0x1304
+#define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff)
+#define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00)
+#define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000)
+#define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC2_CFG:
+ */
+#define EDCA_AC2_CFG 0x1308
+#define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff)
+#define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00)
+#define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000)
+#define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC3_CFG:
+ */
+#define EDCA_AC3_CFG 0x130c
+#define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff)
+#define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00)
+#define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000)
+#define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000)
+
+/*
+ * EDCA_TID_AC_MAP:
+ */
+#define EDCA_TID_AC_MAP 0x1310
+
+/*
+ * TX_PWR_CFG_0:
+ */
+#define TX_PWR_CFG_0 0x1314
+#define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f)
+#define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0)
+#define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00)
+#define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000)
+#define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000)
+#define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000)
+#define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000)
+#define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_1:
+ */
+#define TX_PWR_CFG_1 0x1318
+#define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f)
+#define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0)
+#define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00)
+#define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000)
+#define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000)
+#define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000)
+#define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000)
+#define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_2:
+ */
+#define TX_PWR_CFG_2 0x131c
+#define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f)
+#define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0)
+#define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00)
+#define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000)
+#define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000)
+#define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000)
+#define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000)
+#define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_3:
+ */
+#define TX_PWR_CFG_3 0x1320
+#define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f)
+#define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0)
+#define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00)
+#define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000)
+#define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000)
+#define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000)
+#define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000)
+#define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_4:
+ */
+#define TX_PWR_CFG_4 0x1324
+#define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f)
+#define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0)
+#define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00)
+#define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000)
+
+/*
+ * TX_PIN_CFG:
+ */
+#define TX_PIN_CFG 0x1328
+#define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001)
+#define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002)
+#define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004)
+#define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008)
+#define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010)
+#define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020)
+#define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040)
+#define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080)
+#define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100)
+#define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200)
+#define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400)
+#define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800)
+#define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000)
+#define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000)
+#define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000)
+#define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000)
+#define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000)
+#define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000)
+#define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000)
+#define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000)
+
+/*
+ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
+ */
+#define TX_BAND_CFG 0x132c
+#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001)
+#define TX_BAND_CFG_A FIELD32(0x00000002)
+#define TX_BAND_CFG_BG FIELD32(0x00000004)
+
+/*
+ * TX_SW_CFG0:
+ */
+#define TX_SW_CFG0 0x1330
+
+/*
+ * TX_SW_CFG1:
+ */
+#define TX_SW_CFG1 0x1334
+
+/*
+ * TX_SW_CFG2:
+ */
+#define TX_SW_CFG2 0x1338
+
+/*
+ * TXOP_THRES_CFG:
+ */
+#define TXOP_THRES_CFG 0x133c
+
+/*
+ * TXOP_CTRL_CFG:
+ */
+#define TXOP_CTRL_CFG 0x1340
+
+/*
+ * TX_RTS_CFG:
+ * RTS_THRES: unit:byte
+ * RTS_FBK_EN: enable rts rate fallback
+ */
+#define TX_RTS_CFG 0x1344
+#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff)
+#define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00)
+#define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000)
+
+/*
+ * TX_TIMEOUT_CFG:
+ * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
+ * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
+ * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
+ * it is recommended that:
+ * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
+ */
+#define TX_TIMEOUT_CFG 0x1348
+#define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0)
+#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00)
+#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000)
+
+/*
+ * TX_RTY_CFG:
+ * SHORT_RTY_LIMIT: short retry limit
+ * LONG_RTY_LIMIT: long retry limit
+ * LONG_RTY_THRE: Long retry threshoold
+ * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
+ * 0:expired by retry limit, 1: expired by mpdu life timer
+ * AGG_RTY_MODE: Aggregate MPDU retry mode
+ * 0:expired by retry limit, 1: expired by mpdu life timer
+ * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
+ */
+#define TX_RTY_CFG 0x134c
+#define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff)
+#define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00)
+#define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000)
+#define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000)
+#define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000)
+#define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000)
+
+/*
+ * TX_LINK_CFG:
+ * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
+ * MFB_ENABLE: TX apply remote MFB 1:enable
+ * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable
+ * 0: not apply remote remote unsolicit (MFS=7)
+ * TX_MRQ_EN: MCS request TX enable
+ * TX_RDG_EN: RDG TX enable
+ * TX_CF_ACK_EN: Piggyback CF-ACK enable
+ * REMOTE_MFB: remote MCS feedback
+ * REMOTE_MFS: remote MCS feedback sequence number
+ */
+#define TX_LINK_CFG 0x1350
+#define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff)
+#define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100)
+#define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200)
+#define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400)
+#define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800)
+#define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000)
+#define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000)
+#define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000)
+
+/*
+ * HT_FBK_CFG0:
+ */
+#define HT_FBK_CFG0 0x1354
+#define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f)
+#define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0)
+#define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00)
+#define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000)
+#define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000)
+#define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000)
+#define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000)
+#define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000)
+
+/*
+ * HT_FBK_CFG1:
+ */
+#define HT_FBK_CFG1 0x1358
+#define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f)
+#define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0)
+#define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00)
+#define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000)
+#define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000)
+#define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000)
+#define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000)
+#define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG0:
+ */
+#define LG_FBK_CFG0 0x135c
+#define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f)
+#define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0)
+#define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00)
+#define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000)
+#define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000)
+#define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000)
+#define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000)
+#define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG1:
+ */
+#define LG_FBK_CFG1 0x1360
+#define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f)
+#define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0)
+#define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00)
+#define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000)
+
+/*
+ * CCK_PROT_CFG: CCK Protection
+ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
+ * PROTECT_CTRL: Protection control frame type for CCK TX
+ * 0:none, 1:RTS/CTS, 2:CTS-to-self
+ * PROTECT_NAV: TXOP protection type for CCK TX
+ * 0:none, 1:ShortNAVprotect, 2:LongNAVProtect
+ * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
+ * RTS_TH_EN: RTS threshold enable on CCK TX
+ */
+#define CCK_PROT_CFG 0x1364
+#define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
+#define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
+#define CCK_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
+#define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
+
+/*
+ * OFDM_PROT_CFG: OFDM Protection
+ */
+#define OFDM_PROT_CFG 0x1368
+#define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
+#define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
+#define OFDM_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
+#define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
+
+/*
+ * MM20_PROT_CFG: MM20 Protection
+ */
+#define MM20_PROT_CFG 0x136c
+#define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
+#define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
+#define MM20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
+#define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
+
+/*
+ * MM40_PROT_CFG: MM40 Protection
+ */
+#define MM40_PROT_CFG 0x1370
+#define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
+#define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
+#define MM40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
+#define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
+
+/*
+ * GF20_PROT_CFG: GF20 Protection
+ */
+#define GF20_PROT_CFG 0x1374
+#define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
+#define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
+#define GF20_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
+#define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
+
+/*
+ * GF40_PROT_CFG: GF40 Protection
+ */
+#define GF40_PROT_CFG 0x1378
+#define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff)
+#define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000)
+#define GF40_PROT_CFG_PROTECT_NAV FIELD32(0x000c0000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000)
+#define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000)
+
+/*
+ * EXP_CTS_TIME:
+ */
+#define EXP_CTS_TIME 0x137c
+
+/*
+ * EXP_ACK_TIME:
+ */
+#define EXP_ACK_TIME 0x1380
+
+/*
+ * RX_FILTER_CFG: RX configuration register.
+ */
+#define RX_FILTER_CFG 0x1400
+#define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001)
+#define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002)
+#define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004)
+#define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008)
+#define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010)
+#define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020)
+#define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040)
+#define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080)
+#define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100)
+#define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200)
+#define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400)
+#define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800)
+#define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000)
+#define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000)
+#define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000)
+#define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000)
+#define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000)
+
+/*
+ * AUTO_RSP_CFG:
+ * AUTORESPONDER: 0: disable, 1: enable
+ * BAC_ACK_POLICY: 0:long, 1:short preamble
+ * CTS_40_MMODE: Response CTS 40MHz duplicate mode
+ * CTS_40_MREF: Response CTS 40MHz duplicate mode
+ * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
+ * DUAL_CTS_EN: Power bit value in control frame
+ * ACK_CTS_PSM_BIT:Power bit value in control frame
+ */
+#define AUTO_RSP_CFG 0x1404
+#define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001)
+#define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002)
+#define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004)
+#define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008)
+#define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010)
+#define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040)
+#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080)
+
+/*
+ * LEGACY_BASIC_RATE:
+ */
+#define LEGACY_BASIC_RATE 0x1408
+
+/*
+ * HT_BASIC_RATE:
+ */
+#define HT_BASIC_RATE 0x140c
+
+/*
+ * HT_CTRL_CFG:
+ */
+#define HT_CTRL_CFG 0x1410
+
+/*
+ * SIFS_COST_CFG:
+ */
+#define SIFS_COST_CFG 0x1414
+
+/*
+ * RX_PARSER_CFG:
+ * Set NAV for all received frames
+ */
+#define RX_PARSER_CFG 0x1418
+
+/*
+ * TX_SEC_CNT0:
+ */
+#define TX_SEC_CNT0 0x1500
+
+/*
+ * RX_SEC_CNT0:
+ */
+#define RX_SEC_CNT0 0x1504
+
+/*
+ * CCMP_FC_MUTE:
+ */
+#define CCMP_FC_MUTE 0x1508
+
+/*
+ * TXOP_HLDR_ADDR0:
+ */
+#define TXOP_HLDR_ADDR0 0x1600
+
+/*
+ * TXOP_HLDR_ADDR1:
+ */
+#define TXOP_HLDR_ADDR1 0x1604
+
+/*
+ * TXOP_HLDR_ET:
+ */
+#define TXOP_HLDR_ET 0x1608
+
+/*
+ * QOS_CFPOLL_RA_DW0:
+ */
+#define QOS_CFPOLL_RA_DW0 0x160c
+
+/*
+ * QOS_CFPOLL_RA_DW1:
+ */
+#define QOS_CFPOLL_RA_DW1 0x1610
+
+/*
+ * QOS_CFPOLL_QC:
+ */
+#define QOS_CFPOLL_QC 0x1614
+
+/*
+ * RX_STA_CNT0: RX PLCP error count & RX CRC error count
+ */
+#define RX_STA_CNT0 0x1700
+#define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff)
+#define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT1: RX False CCA count & RX LONG frame count
+ */
+#define RX_STA_CNT1 0x1704
+#define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff)
+#define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT2:
+ */
+#define RX_STA_CNT2 0x1708
+#define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff)
+#define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT0: TX Beacon count
+ */
+#define TX_STA_CNT0 0x170c
+#define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff)
+#define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT1: TX tx count
+ */
+#define TX_STA_CNT1 0x1710
+#define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff)
+#define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT2: TX tx count
+ */
+#define TX_STA_CNT2 0x1714
+#define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff)
+#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000)
+
+/*
+ * TX_STA_FIFO: TX Result for specific PID status fifo register
+ */
+#define TX_STA_FIFO 0x1718
+#define TX_STA_FIFO_VALID FIELD32(0x00000001)
+#define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e)
+#define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020)
+#define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040)
+#define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080)
+#define TX_STA_FIFO_WCID FIELD32(0x0000ff00)
+#define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT: Debug counter
+ */
+#define TX_AGG_CNT 0x171c
+#define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff)
+#define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT0:
+ */
+#define TX_AGG_CNT0 0x1720
+#define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff)
+#define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT1:
+ */
+#define TX_AGG_CNT1 0x1724
+#define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff)
+#define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT2:
+ */
+#define TX_AGG_CNT2 0x1728
+#define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff)
+#define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT3:
+ */
+#define TX_AGG_CNT3 0x172c
+#define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff)
+#define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT4:
+ */
+#define TX_AGG_CNT4 0x1730
+#define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff)
+#define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT5:
+ */
+#define TX_AGG_CNT5 0x1734
+#define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff)
+#define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT6:
+ */
+#define TX_AGG_CNT6 0x1738
+#define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff)
+#define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT7:
+ */
+#define TX_AGG_CNT7 0x173c
+#define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff)
+#define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000)
+
+/*
+ * MPDU_DENSITY_CNT:
+ * TX_ZERO_DEL: TX zero length delimiter count
+ * RX_ZERO_DEL: RX zero length delimiter count
+ */
+#define MPDU_DENSITY_CNT 0x1740
+#define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff)
+#define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000)
+
+/*
+ * Security key table memory.
+ * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
+ * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
+ * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
+ * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
+ * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
+ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry
+ */
+#define MAC_WCID_BASE 0x1800
+#define PAIRWISE_KEY_TABLE_BASE 0x4000
+#define MAC_IVEIV_TABLE_BASE 0x6000
+#define MAC_WCID_ATTRIBUTE_BASE 0x6800
+#define SHARED_KEY_TABLE_BASE 0x6c00
+#define SHARED_KEY_MODE_BASE 0x7000
+
+#define MAC_WCID_ENTRY(__idx) \
+ ( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+ ( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define MAC_IVEIV_ENTRY(__idx) \
+ ( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
+#define MAC_WCID_ATTR_ENTRY(__idx) \
+ ( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
+#define SHARED_KEY_ENTRY(__idx) \
+ ( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define SHARED_KEY_MODE_ENTRY(__idx) \
+ ( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
+
+struct mac_wcid_entry {
+ u8 mac[6];
+ u8 reserved[2];
+} __attribute__ ((packed));
+
+struct hw_key_entry {
+ u8 key[16];
+ u8 tx_mic[8];
+ u8 rx_mic[8];
+} __attribute__ ((packed));
+
+struct mac_iveiv_entry {
+ u8 iv[8];
+} __attribute__ ((packed));
+
+/*
+ * MAC_WCID_ATTRIBUTE:
+ */
+#define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001)
+#define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e)
+#define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070)
+#define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380)
+
+/*
+ * SHARED_KEY_MODE:
+ */
+#define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007)
+#define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070)
+#define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700)
+#define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000)
+#define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000)
+#define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000)
+#define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000)
+#define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000)
+
+/*
+ * HOST-MCU communication
+ */
+
+/*
+ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
+ */
+#define H2M_MAILBOX_CSR 0x7010
+#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
+#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_CID:
+ */
+#define H2M_MAILBOX_CID 0x7014
+#define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff)
+#define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_STATUS:
+ */
+#define H2M_MAILBOX_STATUS 0x701c
+
+/*
+ * H2M_INT_SRC:
+ */
+#define H2M_INT_SRC 0x7024
+
+/*
+ * H2M_BBP_AGENT:
+ */
+#define H2M_BBP_AGENT 0x7028
+
+/*
+ * MCU_LEDCS: LED control for MCU Mailbox.
+ */
+#define MCU_LEDCS_LED_MODE FIELD8(0x1f)
+#define MCU_LEDCS_POLARITY FIELD8(0x01)
+
+/*
+ * HW_CS_CTS_BASE:
+ * Carrier-sense CTS frame base address.
+ * It's where mac stores carrier-sense frame for carrier-sense function.
+ */
+#define HW_CS_CTS_BASE 0x7700
+
+/*
+ * HW_DFS_CTS_BASE:
+ * FS CTS frame base address. It's where mac stores CTS frame for DFS.
+ */
+#define HW_DFS_CTS_BASE 0x7780
+
+/*
+ * TXRX control registers - base address 0x3000
+ */
+
+/*
+ * TXRX_CSR1:
+ * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first..
+ */
+#define TXRX_CSR1 0x77d0
+
+/*
+ * HW_DEBUG_SETTING_BASE:
+ * since NULL frame won't be that long (256 byte)
+ * We steal 16 tail bytes to save debugging settings
+ */
+#define HW_DEBUG_SETTING_BASE 0x77f0
+#define HW_DEBUG_SETTING_BASE2 0x7770
+
+/*
+ * HW_BEACON_BASE
+ * In order to support maximum 8 MBSS and its maximum length
+ * is 512 bytes for each beacon
+ * Three section discontinue memory segments will be used.
+ * 1. The original region for BCN 0~3
+ * 2. Extract memory from FCE table for BCN 4~5
+ * 3. Extract memory from Pair-wise key table for BCN 6~7
+ * It occupied those memory of wcid 238~253 for BCN 6
+ * and wcid 222~237 for BCN 7
+ *
+ * IMPORTANT NOTE: Not sure why legacy driver does this,
+ * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
+ */
+#define HW_BEACON_BASE0 0x7800
+#define HW_BEACON_BASE1 0x7a00
+#define HW_BEACON_BASE2 0x7c00
+#define HW_BEACON_BASE3 0x7e00
+#define HW_BEACON_BASE4 0x7200
+#define HW_BEACON_BASE5 0x7400
+#define HW_BEACON_BASE6 0x5dc0
+#define HW_BEACON_BASE7 0x5bc0
+
+#define HW_BEACON_OFFSET(__index) \
+ ( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
+ (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
+ (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
+
+/*
+ * 8051 firmware image.
+ */
+#define FIRMWARE_RT2870 "rt2870.bin"
+#define FIRMWARE_IMAGE_BASE 0x3000
+
+/*
+ * BBP registers.
+ * The wordsize of the BBP is 8 bits.
+ */
+
+/*
+ * BBP 1: TX Antenna
+ */
+#define BBP1_TX_POWER FIELD8(0x07)
+#define BBP1_TX_ANTENNA FIELD8(0x18)
+
+/*
+ * BBP 3: RX Antenna
+ */
+#define BBP3_RX_ANTENNA FIELD8(0x18)
+#define BBP3_HT40_PLUS FIELD8(0x20)
+
+/*
+ * BBP 4: Bandwidth
+ */
+#define BBP4_TX_BF FIELD8(0x01)
+#define BBP4_BANDWIDTH FIELD8(0x18)
+
+/*
+ * RFCSR registers
+ * The wordsize of the RFCSR is 8 bits.
+ */
+
+/*
+ * RFCSR 6:
+ */
+#define RFCSR6_R FIELD8(0x03)
+
+/*
+ * RFCSR 7:
+ */
+#define RFCSR7_RF_TUNING FIELD8(0x01)
+
+/*
+ * RFCSR 12:
+ */
+#define RFCSR12_TX_POWER FIELD8(0x1f)
+
+/*
+ * RFCSR 22:
+ */
+#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
+
+/*
+ * RFCSR 23:
+ */
+#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
+
+/*
+ * RFCSR 30:
+ */
+#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
+
+/*
+ * RF registers
+ */
+
+/*
+ * RF 2
+ */
+#define RF2_ANTENNA_RX2 FIELD32(0x00000040)
+#define RF2_ANTENNA_TX1 FIELD32(0x00004000)
+#define RF2_ANTENNA_RX1 FIELD32(0x00020000)
+
+/*
+ * RF 3
+ */
+#define RF3_TXPOWER_G FIELD32(0x00003e00)
+#define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200)
+#define RF3_TXPOWER_A FIELD32(0x00003c00)
+
+/*
+ * RF 4
+ */
+#define RF4_TXPOWER_G FIELD32(0x000007c0)
+#define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040)
+#define RF4_TXPOWER_A FIELD32(0x00000780)
+#define RF4_FREQ_OFFSET FIELD32(0x001f8000)
+#define RF4_HT40 FIELD32(0x00200000)
+
+/*
+ * EEPROM content.
+ * The wordsize of the EEPROM is 16 bits.
+ */
+
+/*
+ * EEPROM Version
+ */
+#define EEPROM_VERSION 0x0001
+#define EEPROM_VERSION_FAE FIELD16(0x00ff)
+#define EEPROM_VERSION_VERSION FIELD16(0xff00)
+
+/*
+ * HW MAC address.
+ */
+#define EEPROM_MAC_ADDR_0 0x0002
+#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_1 0x0003
+#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_2 0x0004
+#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
+
+/*
+ * EEPROM ANTENNA config
+ * RXPATH: 1: 1R, 2: 2R, 3: 3R
+ * TXPATH: 1: 1T, 2: 2T
+ */
+#define EEPROM_ANTENNA 0x001a
+#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f)
+#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0)
+#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00)
+
+/*
+ * EEPROM NIC config
+ * CARDBUS_ACCEL: 0 - enable, 1 - disable
+ */
+#define EEPROM_NIC 0x001b
+#define EEPROM_NIC_HW_RADIO FIELD16(0x0001)
+#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002)
+#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004)
+#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008)
+#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010)
+#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020)
+#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040)
+#define EEPROM_NIC_WPS_PBC FIELD16(0x0080)
+#define EEPROM_NIC_BW40M_BG FIELD16(0x0100)
+#define EEPROM_NIC_BW40M_A FIELD16(0x0200)
+
+/*
+ * EEPROM frequency
+ */
+#define EEPROM_FREQ 0x001d
+#define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
+#define EEPROM_FREQ_LED_MODE FIELD16(0x7f00)
+#define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000)
+
+/*
+ * EEPROM LED
+ * POLARITY_RDY_G: Polarity RDY_G setting.
+ * POLARITY_RDY_A: Polarity RDY_A setting.
+ * POLARITY_ACT: Polarity ACT setting.
+ * POLARITY_GPIO_0: Polarity GPIO0 setting.
+ * POLARITY_GPIO_1: Polarity GPIO1 setting.
+ * POLARITY_GPIO_2: Polarity GPIO2 setting.
+ * POLARITY_GPIO_3: Polarity GPIO3 setting.
+ * POLARITY_GPIO_4: Polarity GPIO4 setting.
+ * LED_MODE: Led mode.
+ */
+#define EEPROM_LED1 0x001e
+#define EEPROM_LED2 0x001f
+#define EEPROM_LED3 0x0020
+#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001)
+#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
+#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
+#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
+#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
+#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
+#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
+#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
+#define EEPROM_LED_LED_MODE FIELD16(0x1f00)
+
+/*
+ * EEPROM LNA
+ */
+#define EEPROM_LNA 0x0022
+#define EEPROM_LNA_BG FIELD16(0x00ff)
+#define EEPROM_LNA_A0 FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG offset
+ */
+#define EEPROM_RSSI_BG 0x0023
+#define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff)
+#define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG2 offset
+ */
+#define EEPROM_RSSI_BG2 0x0024
+#define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff)
+#define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A offset
+ */
+#define EEPROM_RSSI_A 0x0025
+#define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff)
+#define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A2 offset
+ */
+#define EEPROM_RSSI_A2 0x0026
+#define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff)
+#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
+ * This is delta in 40MHZ.
+ * VALUE: Tx Power dalta value (MAX=4)
+ * TYPE: 1: Plus the delta value, 0: minus the delta value
+ * TXPOWER: Enable:
+ */
+#define EEPROM_TXPOWER_DELTA 0x0028
+#define EEPROM_TXPOWER_DELTA_VALUE FIELD16(0x003f)
+#define EEPROM_TXPOWER_DELTA_TYPE FIELD16(0x0040)
+#define EEPROM_TXPOWER_DELTA_TXPOWER FIELD16(0x0080)
+
+/*
+ * EEPROM TXPOWER 802.11BG
+ */
+#define EEPROM_TXPOWER_BG1 0x0029
+#define EEPROM_TXPOWER_BG2 0x0030
+#define EEPROM_TXPOWER_BG_SIZE 7
+#define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff)
+#define EEPROM_TXPOWER_BG_2 FIELD16(0xff00)
+
+/*
+ * EEPROM TXPOWER 802.11A
+ */
+#define EEPROM_TXPOWER_A1 0x003c
+#define EEPROM_TXPOWER_A2 0x0053
+#define EEPROM_TXPOWER_A_SIZE 6
+#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
+#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower byrate: 20MHZ power
+ */
+#define EEPROM_TXPOWER_BYRATE 0x006f
+
+/*
+ * EEPROM BBP.
+ */
+#define EEPROM_BBP_START 0x0078
+#define EEPROM_BBP_SIZE 16
+#define EEPROM_BBP_VALUE FIELD16(0x00ff)
+#define EEPROM_BBP_REG_ID FIELD16(0xff00)
+
+/*
+ * MCU mailbox commands.
+ */
+#define MCU_SLEEP 0x30
+#define MCU_WAKEUP 0x31
+#define MCU_RADIO_OFF 0x35
+#define MCU_CURRENT 0x36
+#define MCU_LED 0x50
+#define MCU_LED_STRENGTH 0x51
+#define MCU_LED_1 0x52
+#define MCU_LED_2 0x53
+#define MCU_LED_3 0x54
+#define MCU_RADAR 0x60
+#define MCU_BOOT_SIGNAL 0x72
+#define MCU_BBP_SIGNAL 0x80
+#define MCU_POWER_SAVE 0x83
+
+/*
+ * MCU mailbox tokens
+ */
+#define TOKEN_WAKUP 3
+
+/*
+ * DMA descriptor defines.
+ */
+#define TXD_DESC_SIZE ( 4 * sizeof(__le32) )
+#define TXINFO_DESC_SIZE ( 1 * sizeof(__le32) )
+#define TXWI_DESC_SIZE ( 4 * sizeof(__le32) )
+#define RXD_DESC_SIZE ( 1 * sizeof(__le32) )
+#define RXWI_DESC_SIZE ( 4 * sizeof(__le32) )
+
+/*
+ * TX descriptor format for TX, PRIO and Beacon Ring.
+ */
+
+/*
+ * Word0
+ */
+#define TXD_W0_SD_PTR0 FIELD32(0xffffffff)
+
+/*
+ * Word1
+ */
+#define TXD_W1_SD_LEN1 FIELD32(0x00003fff)
+#define TXD_W1_LAST_SEC1 FIELD32(0x00004000)
+#define TXD_W1_BURST FIELD32(0x00008000)
+#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000)
+#define TXD_W1_LAST_SEC0 FIELD32(0x40000000)
+#define TXD_W1_DMA_DONE FIELD32(0x80000000)
+
+/*
+ * Word2
+ */
+#define TXD_W2_SD_PTR1 FIELD32(0xffffffff)
+
+/*
+ * Word3
+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
+ * 0:MGMT, 1:HCCA 2:EDCA
+ */
+#define TXD_W3_WIV FIELD32(0x01000000)
+#define TXD_W3_QSEL FIELD32(0x06000000)
+#define TXD_W3_TCO FIELD32(0x20000000)
+#define TXD_W3_UCO FIELD32(0x40000000)
+#define TXD_W3_ICO FIELD32(0x80000000)
+
+/*
+ * TX Info structure
+ */
+
+/*
+ * Word0
+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
+ * 0:MGMT, 1:HCCA 2:EDCA
+ * USB_DMA_NEXT_VALID: Used ONLY in USB bulk Aggregation, NextValid
+ * DMA_TX_BURST: used ONLY in USB bulk Aggregation.
+ * Force USB DMA transmit frame from current selected endpoint
+ */
+#define TXINFO_W0_USB_DMA_TX_PKT_LEN FIELD32(0x0000ffff)
+#define TXINFO_W0_WIV FIELD32(0x01000000)
+#define TXINFO_W0_QSEL FIELD32(0x06000000)
+#define TXINFO_W0_SW_USE_LAST_ROUND FIELD32(0x08000000)
+#define TXINFO_W0_USB_DMA_NEXT_VALID FIELD32(0x40000000)
+#define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000)
+
+/*
+ * TX WI structure
+ */
+
+/*
+ * Word0
+ * FRAG: 1 To inform TKIP engine this is a fragment.
+ * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
+ * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
+ * BW: Channel bandwidth 20MHz or 40 MHz
+ * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
+ */
+#define TXWI_W0_FRAG FIELD32(0x00000001)
+#define TXWI_W0_MIMO_PS FIELD32(0x00000002)
+#define TXWI_W0_CF_ACK FIELD32(0x00000004)
+#define TXWI_W0_TS FIELD32(0x00000008)
+#define TXWI_W0_AMPDU FIELD32(0x00000010)
+#define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0)
+#define TXWI_W0_TX_OP FIELD32(0x00000300)
+#define TXWI_W0_MCS FIELD32(0x007f0000)
+#define TXWI_W0_BW FIELD32(0x00800000)
+#define TXWI_W0_SHORT_GI FIELD32(0x01000000)
+#define TXWI_W0_STBC FIELD32(0x06000000)
+#define TXWI_W0_IFS FIELD32(0x08000000)
+#define TXWI_W0_PHYMODE FIELD32(0xc0000000)
+
+/*
+ * Word1
+ */
+#define TXWI_W1_ACK FIELD32(0x00000001)
+#define TXWI_W1_NSEQ FIELD32(0x00000002)
+#define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc)
+#define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00)
+#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
+#define TXWI_W1_PACKETID FIELD32(0xf0000000)
+
+/*
+ * Word2
+ */
+#define TXWI_W2_IV FIELD32(0xffffffff)
+
+/*
+ * Word3
+ */
+#define TXWI_W3_EIV FIELD32(0xffffffff)
+
+/*
+ * RX descriptor format for RX Ring.
+ */
+
+/*
+ * Word0
+ * UNICAST_TO_ME: This RX frame is unicast to me.
+ * MULTICAST: This is a multicast frame.
+ * BROADCAST: This is a broadcast frame.
+ * MY_BSS: this frame belongs to the same BSSID.
+ * CRC_ERROR: CRC error.
+ * CIPHER_ERROR: 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid.
+ * AMSDU: rx with 802.3 header, not 802.11 header.
+ */
+
+#define RXD_W0_BA FIELD32(0x00000001)
+#define RXD_W0_DATA FIELD32(0x00000002)
+#define RXD_W0_NULLDATA FIELD32(0x00000004)
+#define RXD_W0_FRAG FIELD32(0x00000008)
+#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000010)
+#define RXD_W0_MULTICAST FIELD32(0x00000020)
+#define RXD_W0_BROADCAST FIELD32(0x00000040)
+#define RXD_W0_MY_BSS FIELD32(0x00000080)
+#define RXD_W0_CRC_ERROR FIELD32(0x00000100)
+#define RXD_W0_CIPHER_ERROR FIELD32(0x00000600)
+#define RXD_W0_AMSDU FIELD32(0x00000800)
+#define RXD_W0_HTC FIELD32(0x00001000)
+#define RXD_W0_RSSI FIELD32(0x00002000)
+#define RXD_W0_L2PAD FIELD32(0x00004000)
+#define RXD_W0_AMPDU FIELD32(0x00008000)
+#define RXD_W0_DECRYPTED FIELD32(0x00010000)
+#define RXD_W0_PLCP_RSSI FIELD32(0x00020000)
+#define RXD_W0_CIPHER_ALG FIELD32(0x00040000)
+#define RXD_W0_LAST_AMSDU FIELD32(0x00080000)
+#define RXD_W0_PLCP_SIGNAL FIELD32(0xfff00000)
+
+/*
+ * RX WI structure
+ */
+
+/*
+ * Word0
+ */
+#define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff)
+#define RXWI_W0_KEY_INDEX FIELD32(0x00000300)
+#define RXWI_W0_BSSID FIELD32(0x00001c00)
+#define RXWI_W0_UDF FIELD32(0x0000e000)
+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000)
+#define RXWI_W0_TID FIELD32(0xf0000000)
+
+/*
+ * Word1
+ */
+#define RXWI_W1_FRAG FIELD32(0x0000000f)
+#define RXWI_W1_SEQUENCE FIELD32(0x0000fff0)
+#define RXWI_W1_MCS FIELD32(0x007f0000)
+#define RXWI_W1_BW FIELD32(0x00800000)
+#define RXWI_W1_SHORT_GI FIELD32(0x01000000)
+#define RXWI_W1_STBC FIELD32(0x06000000)
+#define RXWI_W1_PHYMODE FIELD32(0xc0000000)
+
+/*
+ * Word2
+ */
+#define RXWI_W2_RSSI0 FIELD32(0x000000ff)
+#define RXWI_W2_RSSI1 FIELD32(0x0000ff00)
+#define RXWI_W2_RSSI2 FIELD32(0x00ff0000)
+
+/*
+ * Word3
+ */
+#define RXWI_W3_SNR0 FIELD32(0x000000ff)
+#define RXWI_W3_SNR1 FIELD32(0x0000ff00)
+
+/*
+ * Macro's for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
+ */
+#define MIN_G_TXPOWER 0
+#define MIN_A_TXPOWER -7
+#define MAX_G_TXPOWER 31
+#define MAX_A_TXPOWER 15
+#define DEFAULT_TXPOWER 5
+
+#define TXPOWER_G_FROM_DEV(__txpower) \
+ ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_G_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
+
+#define TXPOWER_A_FROM_DEV(__txpower) \
+ ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_A_TO_DEV(__txpower) \
+ clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
+
+#endif /* RT2800USB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index e03d69975ea..419b1b9f998 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -103,6 +103,15 @@
#define GET_DURATION_RES(__size, __rate)(((__size) * 8 * 10) % (__rate))
/*
+ * Determine the alignment requirement,
+ * to make sure the 802.11 payload is padded to a 4-byte boundrary
+ * we must determine the address of the payload and calculate the
+ * amount of bytes needed to move the data.
+ */
+#define ALIGN_SIZE(__skb, __header) \
+ ( ((unsigned long)((__skb)->data + (__header))) & 3 )
+
+/*
* Standard timing and size defines.
* These values should follow the ieee80211 specifications.
*/
@@ -138,6 +147,7 @@ struct rt2x00_chip {
#define RT2561 0x0302
#define RT2661 0x0401
#define RT2571 0x1300
+#define RT2870 0x1600
u16 rf;
u32 rev;
@@ -357,6 +367,7 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
* for @tx_power_a, @tx_power_bg and @channels.
* @channels: Device/chipset specific channel values (See &struct rf_channel).
* @channels_info: Additional information for channels (See &struct channel_info).
+ * @ht: Driver HT Capabilities (See &ieee80211_sta_ht_cap).
*/
struct hw_mode_spec {
unsigned int supported_bands;
@@ -370,6 +381,8 @@ struct hw_mode_spec {
unsigned int num_channels;
const struct rf_channel *channels;
const struct channel_info *channels_info;
+
+ struct ieee80211_sta_ht_cap ht;
};
/*
@@ -590,6 +603,7 @@ enum rt2x00_flags {
DRIVER_REQUIRE_SCHEDULED,
DRIVER_REQUIRE_DMA,
DRIVER_REQUIRE_COPY_IV,
+ DRIVER_REQUIRE_L2PAD,
/*
* Driver features
@@ -606,6 +620,7 @@ enum rt2x00_flags {
CONFIG_EXTERNAL_LNA_BG,
CONFIG_DOUBLE_ANTENNA,
CONFIG_DISABLE_LINK_TUNING,
+ CONFIG_CHANNEL_HT40,
};
/*
@@ -778,6 +793,13 @@ struct rt2x00_dev {
u8 freq_offset;
/*
+ * Calibration information (for rt2800usb & rt2800pci).
+ * [0] -> BW20
+ * [1] -> BW40
+ */
+ u8 calibration[2];
+
+ /*
* Low level statistics which will have
* to be kept up to date while device is running.
*/
@@ -893,11 +915,10 @@ static inline u32 rt2x00_rev(const struct rt2x00_chip *chipset)
return chipset->rev;
}
-static inline u16 rt2x00_check_rev(const struct rt2x00_chip *chipset,
- const u32 rev)
+static inline bool rt2x00_check_rev(const struct rt2x00_chip *chipset,
+ const u32 mask, const u32 rev)
{
- return (((chipset->rev & 0xffff0) == rev) &&
- !!(chipset->rev & 0x0000f));
+ return ((chipset->rev & mask) == rev);
}
/**
@@ -943,9 +964,6 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed);
-int rt2x00mac_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf);
void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 9c2f5517af2..863e399d4fa 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -173,6 +173,11 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
libconf.conf = conf;
if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) {
+ if (conf_is_ht40(conf))
+ __set_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
+ else
+ __clear_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags);
+
memcpy(&libconf.rf,
&rt2x00dev->spec.channels[conf->channel->hw_value],
sizeof(libconf.rf));
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 0b41845d954..57ab42cfed3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -65,7 +65,8 @@ void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
__set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags);
txdesc->key_idx = hw_key->hw_key_idx;
- txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb);
+ txdesc->iv_offset = txdesc->header_length;
+ txdesc->iv_len = hw_key->iv_len;
if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
__set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags);
@@ -103,47 +104,44 @@ unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
return overhead;
}
-void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len)
+void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
- unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
- if (unlikely(!iv_len))
+ if (unlikely(!txdesc->iv_len))
return;
/* Copy IV/EIV data */
- memcpy(skbdesc->iv, skb->data + header_length, iv_len);
+ memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len);
}
-void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len)
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
- unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
- if (unlikely(!iv_len))
+ if (unlikely(!txdesc->iv_len))
return;
/* Copy IV/EIV data */
- memcpy(skbdesc->iv, skb->data + header_length, iv_len);
+ memcpy(skbdesc->iv, skb->data + txdesc->iv_offset, txdesc->iv_len);
/* Move ieee80211 header */
- memmove(skb->data + iv_len, skb->data, header_length);
+ memmove(skb->data + txdesc->iv_len, skb->data, txdesc->iv_offset);
/* Pull buffer to correct size */
- skb_pull(skb, iv_len);
+ skb_pull(skb, txdesc->iv_len);
/* IV/EIV data has officially be stripped */
- skbdesc->flags |= FRAME_DESC_IV_STRIPPED;
+ skbdesc->flags |= SKBDESC_IV_STRIPPED;
}
-void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
- unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
const unsigned int iv_len =
((!!(skbdesc->iv[0])) * 4) + ((!!(skbdesc->iv[1])) * 4);
- if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED))
+ if (!(skbdesc->flags & SKBDESC_IV_STRIPPED))
return;
skb_push(skb, iv_len);
@@ -155,14 +153,15 @@ void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
memcpy(skb->data + header_length, skbdesc->iv, iv_len);
/* IV/EIV data has returned into the frame */
- skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED;
+ skbdesc->flags &= ~SKBDESC_IV_STRIPPED;
}
-void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc)
{
unsigned int payload_len = rxdesc->size - header_length;
+ unsigned int align = ALIGN_SIZE(skb, header_length);
unsigned int iv_len;
unsigned int icv_len;
unsigned int transfer = 0;
@@ -192,32 +191,48 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
}
/*
- * Make room for new data, note that we increase both
- * headsize and tailsize when required. The tailsize is
- * only needed when ICV data needs to be inserted and
- * the padding is smaller than the ICV data.
- * When alignment requirements is greater than the
- * ICV data we must trim the skb to the correct size
- * because we need to remove the extra bytes.
+ * Make room for new data. There are 2 possibilities
+ * either the alignment is already present between
+ * the 802.11 header and payload. In that case we
+ * we have to move the header less then the iv_len
+ * since we can use the already available l2pad bytes
+ * for the iv data.
+ * When the alignment must be added manually we must
+ * move the header more then iv_len since we must
+ * make room for the payload move as well.
*/
- skb_push(skb, iv_len + align);
- if (align < icv_len)
- skb_put(skb, icv_len - align);
- else if (align > icv_len)
- skb_trim(skb, rxdesc->size + iv_len + icv_len);
+ if (l2pad) {
+ skb_push(skb, iv_len - align);
+ skb_put(skb, icv_len);
- /* Move ieee80211 header */
- memmove(skb->data + transfer,
- skb->data + transfer + iv_len + align,
- header_length);
- transfer += header_length;
+ /* Move ieee80211 header */
+ memmove(skb->data + transfer,
+ skb->data + transfer + (iv_len - align),
+ header_length);
+ transfer += header_length;
+ } else {
+ skb_push(skb, iv_len + align);
+ if (align < icv_len)
+ skb_put(skb, icv_len - align);
+ else if (align > icv_len)
+ skb_trim(skb, rxdesc->size + iv_len + icv_len);
+
+ /* Move ieee80211 header */
+ memmove(skb->data + transfer,
+ skb->data + transfer + iv_len + align,
+ header_length);
+ transfer += header_length;
+ }
/* Copy IV/EIV data */
memcpy(skb->data + transfer, rxdesc->iv, iv_len);
transfer += iv_len;
- /* Move payload */
- if (align) {
+ /*
+ * Move payload for alignment purposes. Note that
+ * this is only needed when no l2 padding is present.
+ */
+ if (!l2pad) {
memmove(skb->data + transfer,
skb->data + transfer + align,
payload_len);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 5752aaae906..f2270845072 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -227,6 +227,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
+ unsigned int header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
u8 rate_idx, rate_flags;
/*
@@ -235,13 +236,19 @@ void rt2x00lib_txdone(struct queue_entry *entry,
rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
/*
+ * Remove L2 padding which was added during
+ */
+ if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+ rt2x00queue_payload_align(entry->skb, true, header_length);
+
+ /*
* If the IV/EIV data was stripped from the frame before it was
* passed to the hardware, we should now reinsert it again because
* mac80211 will expect the the same data to be present it the
* frame as it was passed to us.
*/
if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
- rt2x00crypto_tx_insert_iv(entry->skb);
+ rt2x00crypto_tx_insert_iv(entry->skb, header_length);
/*
* Send frame to debugfs immediately, after this call is completed
@@ -316,19 +323,54 @@ void rt2x00lib_txdone(struct queue_entry *entry,
}
EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
+static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
+ struct rxdone_entry_desc *rxdesc)
+{
+ struct ieee80211_supported_band *sband;
+ const struct rt2x00_rate *rate;
+ unsigned int i;
+ int signal;
+ int type;
+
+ /*
+ * For non-HT rates the MCS value needs to contain the
+ * actually used rate modulation (CCK or OFDM).
+ */
+ if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
+ signal = RATE_MCS(rxdesc->rate_mode, rxdesc->signal);
+ else
+ signal = rxdesc->signal;
+
+ type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
+
+ sband = &rt2x00dev->bands[rt2x00dev->curr_band];
+ for (i = 0; i < sband->n_bitrates; i++) {
+ rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
+
+ if (((type == RXDONE_SIGNAL_PLCP) &&
+ (rate->plcp == signal)) ||
+ ((type == RXDONE_SIGNAL_BITRATE) &&
+ (rate->bitrate == signal)) ||
+ ((type == RXDONE_SIGNAL_MCS) &&
+ (rate->mcs == signal))) {
+ return i;
+ }
+ }
+
+ WARNING(rt2x00dev, "Frame received with unrecognized signal, "
+ "signal=0x%.4x, type=%d.\n", signal, type);
+ return 0;
+}
+
void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
struct queue_entry *entry)
{
struct rxdone_entry_desc rxdesc;
struct sk_buff *skb;
struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
- struct ieee80211_supported_band *sband;
- const struct rt2x00_rate *rate;
unsigned int header_length;
- unsigned int align;
- unsigned int i;
- int idx = -1;
-
+ bool l2pad;
+ int rate_idx;
/*
* Allocate a new sk_buffer. If no new buffer available, drop the
* received frame and reuse the existing buffer.
@@ -348,12 +390,15 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
memset(&rxdesc, 0, sizeof(rxdesc));
rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
+ /* Trim buffer to correct size */
+ skb_trim(entry->skb, rxdesc.size);
+
/*
* The data behind the ieee80211 header must be
* aligned on a 4 byte boundary.
*/
header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
- align = ((unsigned long)(entry->skb->data + header_length)) & 3;
+ l2pad = !!(rxdesc.dev_flags & RXDONE_L2PAD);
/*
* Hardware might have stripped the IV/EIV/ICV data,
@@ -362,40 +407,24 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
* in which case we should reinsert the data into the frame.
*/
if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
- (rxdesc.flags & RX_FLAG_IV_STRIPPED)) {
- rt2x00crypto_rx_insert_iv(entry->skb, align,
- header_length, &rxdesc);
- } else if (align) {
- skb_push(entry->skb, align);
- /* Move entire frame in 1 command */
- memmove(entry->skb->data, entry->skb->data + align,
- rxdesc.size);
- }
-
- /* Update data pointers, trim buffer to correct size */
- skb_trim(entry->skb, rxdesc.size);
+ (rxdesc.flags & RX_FLAG_IV_STRIPPED))
+ rt2x00crypto_rx_insert_iv(entry->skb, l2pad, header_length,
+ &rxdesc);
+ else
+ rt2x00queue_payload_align(entry->skb, l2pad, header_length);
/*
- * Update RX statistics.
+ * Check if the frame was received using HT. In that case,
+ * the rate is the MCS index and should be passed to mac80211
+ * directly. Otherwise we need to translate the signal to
+ * the correct bitrate index.
*/
- sband = &rt2x00dev->bands[rt2x00dev->curr_band];
- for (i = 0; i < sband->n_bitrates; i++) {
- rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
-
- if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
- (rate->plcp == rxdesc.signal)) ||
- ((rxdesc.dev_flags & RXDONE_SIGNAL_BITRATE) &&
- (rate->bitrate == rxdesc.signal))) {
- idx = i;
- break;
- }
- }
-
- if (idx < 0) {
- WARNING(rt2x00dev, "Frame received with unrecognized signal,"
- "signal=0x%.2x, type=%d.\n", rxdesc.signal,
- (rxdesc.dev_flags & RXDONE_SIGNAL_MASK));
- idx = 0;
+ if (rxdesc.rate_mode == RATE_MODE_CCK ||
+ rxdesc.rate_mode == RATE_MODE_OFDM) {
+ rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
+ } else {
+ rxdesc.flags |= RX_FLAG_HT;
+ rate_idx = rxdesc.signal;
}
/*
@@ -405,7 +434,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
rx_status->mactime = rxdesc.timestamp;
- rx_status->rate_idx = idx;
+ rx_status->rate_idx = rate_idx;
rx_status->qual = rt2x00link_calculate_signal(rt2x00dev, rxdesc.rssi);
rx_status->signal = rxdesc.rssi;
rx_status->noise = rxdesc.noise;
@@ -440,72 +469,84 @@ const struct rt2x00_rate rt2x00_supported_rates[12] = {
.bitrate = 10,
.ratemask = BIT(0),
.plcp = 0x00,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 0),
},
{
.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 20,
.ratemask = BIT(1),
.plcp = 0x01,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 1),
},
{
.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 55,
.ratemask = BIT(2),
.plcp = 0x02,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 2),
},
{
.flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 110,
.ratemask = BIT(3),
.plcp = 0x03,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 3),
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 60,
.ratemask = BIT(4),
.plcp = 0x0b,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 0),
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 90,
.ratemask = BIT(5),
.plcp = 0x0f,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 1),
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 120,
.ratemask = BIT(6),
.plcp = 0x0a,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 2),
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 180,
.ratemask = BIT(7),
.plcp = 0x0e,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 3),
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 240,
.ratemask = BIT(8),
.plcp = 0x09,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 4),
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 360,
.ratemask = BIT(9),
.plcp = 0x0d,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 5),
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 480,
.ratemask = BIT(10),
.plcp = 0x08,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 6),
},
{
.flags = DEV_RATE_OFDM,
.bitrate = 540,
.ratemask = BIT(11),
.plcp = 0x0c,
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 7),
},
};
@@ -581,6 +622,8 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&rt2x00dev->bands[IEEE80211_BAND_2GHZ];
+ memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap,
+ &spec->ht, sizeof(spec->ht));
}
/*
@@ -597,6 +640,8 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&rt2x00dev->bands[IEEE80211_BAND_5GHZ];
+ memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap,
+ &spec->ht, sizeof(spec->ht));
}
return 0;
diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c
new file mode 100644
index 00000000000..e3cec839e54
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c
@@ -0,0 +1,69 @@
+/*
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2x00lib
+ Abstract: rt2x00 HT specific routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "rt2x00.h"
+#include "rt2x00lib.h"
+
+void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
+ struct txentry_desc *txdesc,
+ const struct rt2x00_rate *hwrate)
+{
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+ struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
+
+ if (tx_info->control.sta)
+ txdesc->mpdu_density =
+ tx_info->control.sta->ht_cap.ampdu_density;
+ else
+ txdesc->mpdu_density = 0;
+
+ txdesc->ba_size = 7; /* FIXME: What value is needed? */
+ txdesc->stbc = 0; /* FIXME: What value is needed? */
+
+ txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs);
+ if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+ txdesc->mcs |= 0x08;
+
+ /*
+ * Convert flags
+ */
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
+ __set_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags);
+
+ /*
+ * Determine HT Mix/Greenfield rate mode
+ */
+ if (txrate->flags & IEEE80211_TX_RC_MCS)
+ txdesc->rate_mode = RATE_MODE_HT_MIX;
+ if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD)
+ txdesc->rate_mode = RATE_MODE_HT_GREENFIELD;
+ if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+ __set_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags);
+ if (txrate->flags & IEEE80211_TX_RC_SHORT_GI)
+ __set_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags);
+}
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index a631613177d..39e00b3d781 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -32,8 +32,8 @@
* Interval defines
* Both the link tuner as the rfkill will be called once per second.
*/
-#define LINK_TUNE_INTERVAL ( round_jiffies_relative(HZ) )
-#define RFKILL_POLL_INTERVAL ( 1000 )
+#define LINK_TUNE_INTERVAL round_jiffies_relative(HZ)
+#define RFKILL_POLL_INTERVAL 1000
/*
* rt2x00_rate: Per rate device information
@@ -48,6 +48,7 @@ struct rt2x00_rate {
unsigned short ratemask;
unsigned short plcp;
+ unsigned short mcs;
};
extern const struct rt2x00_rate rt2x00_supported_rates[12];
@@ -57,6 +58,14 @@ static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
return &rt2x00_supported_rates[hw_value & 0xff];
}
+#define RATE_MCS(__mode, __mcs) \
+ ( (((__mode) & 0x00ff) << 8) | ((__mcs) & 0x00ff) )
+
+static inline int rt2x00_get_rate_mcs(const u16 mcs_value)
+{
+ return (mcs_value & 0x00ff);
+}
+
/*
* Radio control handlers.
*/
@@ -113,6 +122,23 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
/**
+ * rt2x00queue_payload_align - Align 802.11 payload to 4-byte boundary
+ * @skb: The skb to align
+ * @l2pad: Should L2 padding be used
+ * @header_length: Length of 802.11 header
+ *
+ * This function prepares the @skb to be send to the device or mac80211.
+ * If @l2pad is set to true padding will occur between the 802.11 header
+ * and payload. Otherwise the padding will be done in front of the 802.11
+ * header.
+ * When @l2pad is set the function will check for the &SKBDESC_L2_PADDED
+ * flag in &skb_frame_desc. If that flag is set, the padding is removed
+ * and the flag cleared. Otherwise the padding is added and the flag is set.
+ */
+void rt2x00queue_payload_align(struct sk_buff *skb,
+ bool l2pad, unsigned int header_length);
+
+/**
* rt2x00queue_write_tx_frame - Write TX frame to hardware
* @queue: Queue over which the frame should be send
* @skb: The skb to send
@@ -295,10 +321,12 @@ void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
struct txentry_desc *txdesc);
unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb);
-void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, unsigned int iv_len);
-void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len);
-void rt2x00crypto_tx_insert_iv(struct sk_buff *skb);
-void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
+ struct txentry_desc *txdesc);
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
+ struct txentry_desc *txdesc);
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length);
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc);
#else
@@ -319,21 +347,21 @@ static inline unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev
}
static inline void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
- unsigned int iv_len)
+ struct txentry_desc *txdesc)
{
}
static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
- unsigned int iv_len)
+ struct txentry_desc *txdesc)
{
}
-static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb,
+ unsigned int header_length)
{
}
-static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
- unsigned int align,
+static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc)
{
@@ -341,6 +369,21 @@ static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
#endif /* CONFIG_RT2X00_LIB_CRYPTO */
/*
+ * HT handlers.
+ */
+#ifdef CONFIG_RT2X00_LIB_HT
+void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
+ struct txentry_desc *txdesc,
+ const struct rt2x00_rate *hwrate);
+#else
+static inline void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
+ struct txentry_desc *txdesc,
+ const struct rt2x00_rate *hwrate)
+{
+}
+#endif /* CONFIG_RT2X00_LIB_HT */
+
+/*
* RFkill handlers.
*/
#ifdef CONFIG_RT2X00_LIB_RFKILL
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c41a0b9e473..c4c06b4e1f0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -390,56 +390,6 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
}
EXPORT_SYMBOL_GPL(rt2x00mac_config);
-int rt2x00mac_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
- struct rt2x00_intf *intf = vif_to_intf(vif);
- int update_bssid = 0;
- int status = 0;
-
- /*
- * Mac80211 might be calling this function while we are trying
- * to remove the device or perhaps suspending it.
- */
- if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
- return 0;
-
- spin_lock(&intf->lock);
-
- /*
- * conf->bssid can be NULL if coming from the internal
- * beacon update routine.
- */
- if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
- update_bssid = 1;
- memcpy(&intf->bssid, conf->bssid, ETH_ALEN);
- }
-
- spin_unlock(&intf->lock);
-
- /*
- * Call rt2x00_config_intf() outside of the spinlock context since
- * the call will sleep for USB drivers. By using the ieee80211_if_conf
- * values as arguments we make keep access to rt2x00_intf thread safe
- * even without the lock.
- */
- rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL,
- update_bssid ? conf->bssid : NULL);
-
- /*
- * Update the beacon.
- */
- if (conf->changed & (IEEE80211_IFCC_BEACON |
- IEEE80211_IFCC_BEACON_ENABLED))
- status = rt2x00queue_update_beacon(rt2x00dev, vif,
- conf->enable_beacon);
-
- return status;
-}
-EXPORT_SYMBOL_GPL(rt2x00mac_config_interface);
-
void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
@@ -623,6 +573,44 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
struct rt2x00_dev *rt2x00dev = hw->priv;
struct rt2x00_intf *intf = vif_to_intf(vif);
unsigned int delayed = 0;
+ int update_bssid = 0;
+
+ /*
+ * Mac80211 might be calling this function while we are trying
+ * to remove the device or perhaps suspending it.
+ */
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return;
+
+ spin_lock(&intf->lock);
+
+ /*
+ * conf->bssid can be NULL if coming from the internal
+ * beacon update routine.
+ */
+ if (changes & BSS_CHANGED_BSSID) {
+ update_bssid = 1;
+ memcpy(&intf->bssid, bss_conf->bssid, ETH_ALEN);
+ }
+
+ spin_unlock(&intf->lock);
+
+ /*
+ * Call rt2x00_config_intf() outside of the spinlock context since
+ * the call will sleep for USB drivers. By using the ieee80211_if_conf
+ * values as arguments we make keep access to rt2x00_intf thread safe
+ * even without the lock.
+ */
+ if (changes & BSS_CHANGED_BSSID)
+ rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL,
+ update_bssid ? bss_conf->bssid : NULL);
+
+ /*
+ * Update the beacon.
+ */
+ if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED))
+ rt2x00queue_update_beacon(rt2x00dev, vif,
+ bss_conf->enable_beacon);
/*
* When the association status has changed we must reset the link
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index a5664bd8493..44e5b3279ca 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -148,6 +148,35 @@ void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
dev_kfree_skb_any(skb);
}
+void rt2x00queue_payload_align(struct sk_buff *skb,
+ bool l2pad, unsigned int header_length)
+{
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+ unsigned int frame_length = skb->len;
+ unsigned int align = ALIGN_SIZE(skb, header_length);
+
+ if (!align)
+ return;
+
+ if (l2pad) {
+ if (skbdesc->flags & SKBDESC_L2_PADDED) {
+ /* Remove L2 padding */
+ memmove(skb->data + align, skb->data, header_length);
+ skb_pull(skb, align);
+ skbdesc->flags &= ~SKBDESC_L2_PADDED;
+ } else {
+ /* Add L2 padding */
+ skb_push(skb, align);
+ memmove(skb->data, skb->data + align, header_length);
+ skbdesc->flags |= SKBDESC_L2_PADDED;
+ }
+ } else {
+ /* Generic payload alignment to 4-byte boundary */
+ skb_push(skb, align);
+ memmove(skb->data, skb->data + align, frame_length);
+ }
+}
+
static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
@@ -259,6 +288,12 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
txdesc->aifs = entry->queue->aifs;
/*
+ * Header and alignment information.
+ */
+ txdesc->header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+ txdesc->l2pad = ALIGN_SIZE(entry->skb, txdesc->header_length);
+
+ /*
* Check whether this frame is to be acked.
*/
if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK))
@@ -326,6 +361,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
* Apply TX descriptor handling by components
*/
rt2x00crypto_create_tx_descriptor(entry, txdesc);
+ rt2x00ht_create_tx_descriptor(entry, txdesc, hwrate);
rt2x00queue_create_tx_descriptor_seq(entry, txdesc);
rt2x00queue_create_tx_descriptor_plcp(entry, txdesc, hwrate);
}
@@ -368,7 +404,6 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
struct txentry_desc txdesc;
struct skb_frame_desc *skbdesc;
- unsigned int iv_len = 0;
u8 rate_idx, rate_flags;
if (unlikely(rt2x00queue_full(queue)))
@@ -390,9 +425,6 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
entry->skb = skb;
rt2x00queue_create_tx_descriptor(entry, &txdesc);
- if (IEEE80211_SKB_CB(skb)->control.hw_key != NULL)
- iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len;
-
/*
* All information is retrieved from the skb->cb array,
* now we should claim ownership of the driver part of that
@@ -415,11 +447,15 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
!test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) {
if (test_bit(DRIVER_REQUIRE_COPY_IV, &queue->rt2x00dev->flags))
- rt2x00crypto_tx_copy_iv(skb, iv_len);
+ rt2x00crypto_tx_copy_iv(skb, &txdesc);
else
- rt2x00crypto_tx_remove_iv(skb, iv_len);
+ rt2x00crypto_tx_remove_iv(skb, &txdesc);
}
+ if (test_bit(DRIVER_REQUIRE_L2PAD, &queue->rt2x00dev->flags))
+ rt2x00queue_payload_align(entry->skb, true,
+ txdesc.header_length);
+
/*
* It could be possible that the queue was corrupted and this
* call failed. Since we always return NETDEV_TX_OK to mac80211,
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 97e2ab08f08..b5e06347c8a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -35,9 +35,12 @@
* for USB devices this restriction does not apply, but the value of
* 2432 makes sense since it is big enough to contain the maximum fragment
* size according to the ieee802.11 specs.
+ * The aggregation size depends on support from the driver, but should
+ * be something around 3840 bytes.
*/
-#define DATA_FRAME_SIZE 2432
-#define MGMT_FRAME_SIZE 256
+#define DATA_FRAME_SIZE 2432
+#define MGMT_FRAME_SIZE 256
+#define AGGREGATION_SIZE 3840
/**
* DOC: Number of entries per queue
@@ -87,13 +90,16 @@ enum data_queue_qid {
*
* @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX
* @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX
- * @FRAME_DESC_IV_STRIPPED: Frame contained a IV/EIV provided by
+ * @SKBDESC_IV_STRIPPED: Frame contained a IV/EIV provided by
* mac80211 but was stripped for processing by the driver.
+ * @SKBDESC_L2_PADDED: Payload has been padded for 4-byte alignment,
+ * the padded bytes are located between header and payload.
*/
enum skb_frame_desc_flags {
SKBDESC_DMA_MAPPED_RX = 1 << 0,
SKBDESC_DMA_MAPPED_TX = 1 << 1,
- FRAME_DESC_IV_STRIPPED = 1 << 2,
+ SKBDESC_IV_STRIPPED = 1 << 2,
+ SKBDESC_L2_PADDED = 1 << 3
};
/**
@@ -145,16 +151,20 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb)
*
* @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value.
* @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value.
+ * @RXDONE_SIGNAL_MCS: Signal field contains the mcs value.
* @RXDONE_MY_BSS: Does this frame originate from device's BSS.
* @RXDONE_CRYPTO_IV: Driver provided IV/EIV data.
* @RXDONE_CRYPTO_ICV: Driver provided ICV data.
+ * @RXDONE_L2PAD: 802.11 payload has been padded to 4-byte boundary.
*/
enum rxdone_entry_desc_flags {
- RXDONE_SIGNAL_PLCP = 1 << 0,
- RXDONE_SIGNAL_BITRATE = 1 << 1,
- RXDONE_MY_BSS = 1 << 2,
- RXDONE_CRYPTO_IV = 1 << 3,
- RXDONE_CRYPTO_ICV = 1 << 4,
+ RXDONE_SIGNAL_PLCP = BIT(0),
+ RXDONE_SIGNAL_BITRATE = BIT(1),
+ RXDONE_SIGNAL_MCS = BIT(2),
+ RXDONE_MY_BSS = BIT(3),
+ RXDONE_CRYPTO_IV = BIT(4),
+ RXDONE_CRYPTO_ICV = BIT(5),
+ RXDONE_L2PAD = BIT(6),
};
/**
@@ -163,7 +173,7 @@ enum rxdone_entry_desc_flags {
* from &rxdone_entry_desc to a signal value type.
*/
#define RXDONE_SIGNAL_MASK \
- ( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE )
+ ( RXDONE_SIGNAL_PLCP | RXDONE_SIGNAL_BITRATE | RXDONE_SIGNAL_MCS )
/**
* struct rxdone_entry_desc: RX Entry descriptor
@@ -177,6 +187,7 @@ enum rxdone_entry_desc_flags {
* @size: Data size of the received frame.
* @flags: MAC80211 receive flags (See &enum mac80211_rx_flags).
* @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags).
+ * @rate_mode: Rate mode (See @enum rate_modulation).
* @cipher: Cipher type used during decryption.
* @cipher_status: Decryption status.
* @iv: IV/EIV data used during decryption.
@@ -190,6 +201,7 @@ struct rxdone_entry_desc {
int size;
int flags;
int dev_flags;
+ u16 rate_mode;
u8 cipher;
u8 cipher_status;
@@ -243,6 +255,9 @@ struct txdone_entry_desc {
* @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared).
* @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware.
* @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware.
+ * @ENTRY_TXD_HT_AMPDU: This frame is part of an AMPDU.
+ * @ENTRY_TXD_HT_BW_40: Use 40MHz Bandwidth.
+ * @ENTRY_TXD_HT_SHORT_GI: Use short GI.
*/
enum txentry_desc_flags {
ENTRY_TXD_RTS_FRAME,
@@ -258,6 +273,9 @@ enum txentry_desc_flags {
ENTRY_TXD_ENCRYPT_PAIRWISE,
ENTRY_TXD_ENCRYPT_IV,
ENTRY_TXD_ENCRYPT_MMIC,
+ ENTRY_TXD_HT_AMPDU,
+ ENTRY_TXD_HT_BW_40,
+ ENTRY_TXD_HT_SHORT_GI,
};
/**
@@ -267,11 +285,17 @@ enum txentry_desc_flags {
*
* @flags: Descriptor flags (See &enum queue_entry_flags).
* @queue: Queue identification (See &enum data_queue_qid).
+ * @header_length: Length of 802.11 header.
+ * @l2pad: Amount of padding to align 802.11 payload to 4-byte boundrary.
* @length_high: PLCP length high word.
* @length_low: PLCP length low word.
* @signal: PLCP signal.
* @service: PLCP service.
+ * @msc: MCS.
+ * @stbc: STBC.
+ * @ba_size: BA size.
* @rate_mode: Rate mode (See @enum rate_modulation).
+ * @mpdu_density: MDPU density.
* @retry_limit: Max number of retries.
* @aifs: AIFS value.
* @ifs: IFS value.
@@ -280,18 +304,26 @@ enum txentry_desc_flags {
* @cipher: Cipher type used for encryption.
* @key_idx: Key index used for encryption.
* @iv_offset: Position where IV should be inserted by hardware.
+ * @iv_len: Length of IV data.
*/
struct txentry_desc {
unsigned long flags;
enum data_queue_qid queue;
+ u16 header_length;
+ u16 l2pad;
+
u16 length_high;
u16 length_low;
u16 signal;
u16 service;
+ u16 mcs;
+ u16 stbc;
+ u16 ba_size;
u16 rate_mode;
+ u16 mpdu_density;
short retry_limit;
short aifs;
@@ -302,6 +334,7 @@ struct txentry_desc {
enum cipher cipher;
u16 key_idx;
u16 iv_offset;
+ u16 iv_len;
};
/**
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 4346cd1494b..cb521ee7a8f 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2735,7 +2735,6 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
- .config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
.set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 853b2b279b6..d10af3687a8 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1846,7 +1846,8 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
- if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) {
+ if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0x25730) ||
+ !rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
return -ENODEV;
}
@@ -2259,7 +2260,6 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
- .config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
.set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 387c133ec0f..7e65d7c3180 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -702,30 +702,26 @@ static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
return 0;
}
-static int rtl8180_config_interface(struct ieee80211_hw *dev,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct rtl8180_priv *priv = dev->priv;
- int i;
-
- for (i = 0; i < ETH_ALEN; i++)
- rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
-
- if (is_valid_ether_addr(conf->bssid))
- rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
- else
- rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
-
- return 0;
-}
-
static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info,
u32 changed)
{
struct rtl8180_priv *priv = dev->priv;
+ int i;
+
+ if (changed & BSS_CHANGED_BSSID) {
+ for (i = 0; i < ETH_ALEN; i++)
+ rtl818x_iowrite8(priv, &priv->map->BSSID[i],
+ info->bssid[i]);
+
+ if (is_valid_ether_addr(info->bssid))
+ rtl818x_iowrite8(priv, &priv->map->MSR,
+ RTL818X_MSR_INFRA);
+ else
+ rtl818x_iowrite8(priv, &priv->map->MSR,
+ RTL818X_MSR_NO_LINK);
+ }
if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp)
priv->rf->conf_erp(dev, info);
@@ -770,7 +766,6 @@ static const struct ieee80211_ops rtl8180_ops = {
.add_interface = rtl8180_add_interface,
.remove_interface = rtl8180_remove_interface,
.config = rtl8180_config,
- .config_interface = rtl8180_config_interface,
.bss_info_changed = rtl8180_bss_info_changed,
.configure_filter = rtl8180_configure_filter,
};
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index ac558da92aa..158827e50c5 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -1090,32 +1090,6 @@ static int rtl8187_config(struct ieee80211_hw *dev, u32 changed)
return 0;
}
-static int rtl8187_config_interface(struct ieee80211_hw *dev,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct rtl8187_priv *priv = dev->priv;
- int i;
- u8 reg;
-
- mutex_lock(&priv->conf_mutex);
- for (i = 0; i < ETH_ALEN; i++)
- rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
-
- if (is_valid_ether_addr(conf->bssid)) {
- reg = RTL818X_MSR_INFRA;
- if (priv->is_rtl8187b)
- reg |= RTL818X_MSR_ENEDCA;
- rtl818x_iowrite8(priv, &priv->map->MSR, reg);
- } else {
- reg = RTL818X_MSR_NO_LINK;
- rtl818x_iowrite8(priv, &priv->map->MSR, reg);
- }
-
- mutex_unlock(&priv->conf_mutex);
- return 0;
-}
-
/*
* With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for
* example. Thus we have to use raw values for AC_*_PARAM register addresses.
@@ -1193,6 +1167,27 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
u32 changed)
{
struct rtl8187_priv *priv = dev->priv;
+ int i;
+ u8 reg;
+
+ if (changed & BSS_CHANGED_BSSID) {
+ mutex_lock(&priv->conf_mutex);
+ for (i = 0; i < ETH_ALEN; i++)
+ rtl818x_iowrite8(priv, &priv->map->BSSID[i],
+ info->bssid[i]);
+
+ if (is_valid_ether_addr(info->bssid)) {
+ reg = RTL818X_MSR_INFRA;
+ if (priv->is_rtl8187b)
+ reg |= RTL818X_MSR_ENEDCA;
+ rtl818x_iowrite8(priv, &priv->map->MSR, reg);
+ } else {
+ reg = RTL818X_MSR_NO_LINK;
+ rtl818x_iowrite8(priv, &priv->map->MSR, reg);
+ }
+
+ mutex_unlock(&priv->conf_mutex);
+ }
if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE))
rtl8187_conf_erp(priv, info->use_short_slot,
@@ -1274,7 +1269,6 @@ static const struct ieee80211_ops rtl8187_ops = {
.add_interface = rtl8187_add_interface,
.remove_interface = rtl8187_remove_interface,
.config = rtl8187_config,
- .config_interface = rtl8187_config_interface,
.bss_info_changed = rtl8187_bss_info_changed,
.configure_filter = rtl8187_configure_filter,
.conf_tx = rtl8187_conf_tx
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
new file mode 100644
index 00000000000..20a9633569f
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -0,0 +1,11 @@
+config WL12XX
+ tristate "TI wl1251/wl1271 support"
+ depends on MAC80211 && WLAN_80211 && SPI_MASTER && EXPERIMENTAL
+ select FW_LOADER
+ select CRC7
+ ---help---
+ This module adds support for wireless adapters based on
+ TI wl1251/wl1271 chipsets.
+
+ If you choose to build a module, it'll be called wl12xx. Say N if
+ unsure.
diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile
new file mode 100644
index 00000000000..d43de27dc54
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/Makefile
@@ -0,0 +1,4 @@
+wl12xx-objs = main.o spi.o event.o tx.o rx.o \
+ ps.o cmd.o acx.o boot.o init.o wl1251.o \
+ debugfs.o
+obj-$(CONFIG_WL12XX) += wl12xx.o
diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
new file mode 100644
index 00000000000..1cfd458ad5a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -0,0 +1,689 @@
+#include "acx.h"
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod,
+ u8 mgt_rate, u8 mgt_mod)
+{
+ int ret;
+ struct acx_fw_gen_frame_rates rates;
+
+ wl12xx_debug(DEBUG_ACX, "acx frame rates");
+
+ rates.header.id = ACX_FW_GEN_FRAME_RATES;
+ rates.header.len = sizeof(struct acx_fw_gen_frame_rates) -
+ sizeof(struct acx_header);
+
+ rates.tx_ctrl_frame_rate = ctrl_rate;
+ rates.tx_ctrl_frame_mod = ctrl_mod;
+ rates.tx_mgt_frame_rate = mgt_rate;
+ rates.tx_mgt_frame_mod = mgt_mod;
+
+ ret = wl12xx_cmd_configure(wl, &rates, sizeof(rates));
+ if (ret < 0) {
+ wl12xx_error("Failed to set FW rates and modulation");
+ return ret;
+ }
+
+ return 0;
+}
+
+
+int wl12xx_acx_station_id(struct wl12xx *wl)
+{
+ int ret, i;
+ struct dot11_station_id mac;
+
+ wl12xx_debug(DEBUG_ACX, "acx dot11_station_id");
+
+ mac.header.id = DOT11_STATION_ID;
+ mac.header.len = sizeof(mac) - sizeof(struct acx_header);
+
+ for (i = 0; i < ETH_ALEN; i++)
+ mac.mac[i] = wl->mac_addr[ETH_ALEN - 1 - i];
+
+ ret = wl12xx_cmd_configure(wl, &mac, sizeof(mac));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id)
+{
+ struct acx_dot11_default_key default_key;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx dot11_default_key (%d)", key_id);
+
+ default_key.header.id = DOT11_DEFAULT_KEY;
+ default_key.header.len = sizeof(default_key) -
+ sizeof(struct acx_header);
+
+ default_key.id = key_id;
+
+ ret = wl12xx_cmd_configure(wl, &default_key, sizeof(default_key));
+ if (ret < 0) {
+ wl12xx_error("Couldnt set default key");
+ return ret;
+ }
+
+ wl->default_key = key_id;
+
+ return 0;
+}
+
+int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval)
+{
+ struct acx_wake_up_condition wake_up;
+
+ wl12xx_debug(DEBUG_ACX, "acx wake up conditions");
+
+ wake_up.header.id = ACX_WAKE_UP_CONDITIONS;
+ wake_up.header.len = sizeof(wake_up) - sizeof(struct acx_header);
+
+ wake_up.wake_up_event = WAKE_UP_EVENT_DTIM_BITMAP;
+ wake_up.listen_interval = listen_interval;
+
+ return wl12xx_cmd_configure(wl, &wake_up, sizeof(wake_up));
+}
+
+int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth)
+{
+ int ret;
+ struct acx_sleep_auth auth;
+
+ wl12xx_debug(DEBUG_ACX, "acx sleep auth");
+
+ auth.header.id = ACX_SLEEP_AUTH;
+ auth.header.len = sizeof(auth) - sizeof(struct acx_header);
+
+ auth.sleep_auth = sleep_auth;
+
+ ret = wl12xx_cmd_configure(wl, &auth, sizeof(auth));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len)
+{
+ struct wl12xx_command cmd;
+ struct acx_revision *rev;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx fw rev");
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ ret = wl12xx_cmd_interrogate(wl, ACX_FW_REV, sizeof(*rev), &cmd);
+ if (ret < 0) {
+ wl12xx_warning("ACX_FW_REV interrogate failed");
+ return ret;
+ }
+
+ rev = (struct acx_revision *) &cmd.parameters;
+
+ /* be careful with the buffer sizes */
+ strncpy(buf, rev->fw_version, min(len, sizeof(rev->fw_version)));
+
+ /*
+ * if the firmware version string is exactly
+ * sizeof(rev->fw_version) long or fw_len is less than
+ * sizeof(rev->fw_version) it won't be null terminated
+ */
+ buf[min(len, sizeof(rev->fw_version)) - 1] = '\0';
+
+ return 0;
+}
+
+int wl12xx_acx_tx_power(struct wl12xx *wl, int power)
+{
+ struct acx_current_tx_power ie;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx dot11_cur_tx_pwr");
+
+ if (power < 0 || power > 25)
+ return -EINVAL;
+
+ memset(&ie, 0, sizeof(ie));
+
+ ie.header.id = DOT11_CUR_TX_PWR;
+ ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+ ie.current_tx_power = power * 10;
+
+ ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+ if (ret < 0) {
+ wl12xx_warning("configure of tx power failed: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_feature_cfg(struct wl12xx *wl)
+{
+ struct acx_feature_config feature;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx feature cfg");
+
+ memset(&feature, 0, sizeof(feature));
+
+ feature.header.id = ACX_FEATURE_CFG;
+ feature.header.len = sizeof(feature) - sizeof(struct acx_header);
+
+ /* DF_ENCRYPTION_DISABLE and DF_SNIFF_MODE_ENABLE are disabled */
+ feature.data_flow_options = 0;
+ feature.options = 0;
+
+ ret = wl12xx_cmd_configure(wl, &feature, sizeof(feature));
+ if (ret < 0)
+ wl12xx_error("Couldnt set HW encryption");
+
+ return ret;
+}
+
+int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len)
+{
+ struct wl12xx_command cmd;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx mem map");
+
+ ret = wl12xx_cmd_interrogate(wl, ACX_MEM_MAP, len, &cmd);
+ if (ret < 0)
+ return ret;
+ else if (cmd.status != CMD_STATUS_SUCCESS)
+ return -EIO;
+
+ memcpy(mem_map, &cmd.parameters, len);
+
+ return 0;
+}
+
+int wl12xx_acx_data_path_params(struct wl12xx *wl,
+ struct acx_data_path_params_resp *data_path)
+{
+ struct acx_data_path_params params;
+ struct wl12xx_command cmd;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx data path params");
+
+ params.rx_packet_ring_chunk_size = DP_RX_PACKET_RING_CHUNK_SIZE;
+ params.tx_packet_ring_chunk_size = DP_TX_PACKET_RING_CHUNK_SIZE;
+
+ params.rx_packet_ring_chunk_num = DP_RX_PACKET_RING_CHUNK_NUM;
+ params.tx_packet_ring_chunk_num = DP_TX_PACKET_RING_CHUNK_NUM;
+
+ params.tx_complete_threshold = 1;
+
+ params.tx_complete_ring_depth = FW_TX_CMPLT_BLOCK_SIZE;
+
+ params.tx_complete_timeout = DP_TX_COMPLETE_TIME_OUT;
+
+ params.header.id = ACX_DATA_PATH_PARAMS;
+ params.header.len = sizeof(params) - sizeof(struct acx_header);
+
+ ret = wl12xx_cmd_configure(wl, &params, sizeof(params));
+ if (ret < 0)
+ return ret;
+
+
+ ret = wl12xx_cmd_interrogate(wl, ACX_DATA_PATH_PARAMS,
+ sizeof(struct acx_data_path_params_resp),
+ &cmd);
+
+ if (ret < 0) {
+ wl12xx_warning("failed to read data path parameters: %d", ret);
+ return ret;
+ } else if (cmd.status != CMD_STATUS_SUCCESS) {
+ wl12xx_warning("data path parameter acx status failed");
+ return -EIO;
+ }
+
+ memcpy(data_path, &cmd.parameters, sizeof(*data_path));
+
+ return 0;
+}
+
+int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time)
+{
+ struct rx_msdu_lifetime msdu_lifetime;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx rx msdu life time");
+
+ msdu_lifetime.header.id = DOT11_RX_MSDU_LIFE_TIME;
+ msdu_lifetime.header.len = sizeof(msdu_lifetime) -
+ sizeof(struct acx_header);
+ msdu_lifetime.lifetime = life_time;
+
+ ret = wl12xx_cmd_configure(wl, &msdu_lifetime, sizeof(msdu_lifetime));
+ if (ret < 0) {
+ wl12xx_warning("failed to set rx msdu life time: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter)
+{
+ struct acx_rx_config rx_config;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx rx config");
+
+ rx_config.header.id = ACX_RX_CFG;
+ rx_config.header.len = sizeof(rx_config) - sizeof(struct acx_header);
+ rx_config.config_options = config;
+ rx_config.filter_options = filter;
+
+ ret = wl12xx_cmd_configure(wl, &rx_config, sizeof(rx_config));
+ if (ret < 0) {
+ wl12xx_warning("failed to set rx config: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_pd_threshold(struct wl12xx *wl)
+{
+ struct acx_packet_detection packet_detection;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx data pd threshold");
+
+ /* FIXME: threshold value not set */
+ packet_detection.header.id = ACX_PD_THRESHOLD;
+ packet_detection.header.len = sizeof(packet_detection) -
+ sizeof(struct acx_header);
+
+ ret = wl12xx_cmd_configure(wl, &packet_detection,
+ sizeof(packet_detection));
+ if (ret < 0) {
+ wl12xx_warning("failed to set pd threshold: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time)
+{
+ struct acx_slot slot;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx slot");
+
+ slot.header.id = ACX_SLOT;
+ slot.header.len = sizeof(slot) - sizeof(struct acx_header);
+
+ slot.wone_index = STATION_WONE_INDEX;
+ slot.slot_time = slot_time;
+
+ ret = wl12xx_cmd_configure(wl, &slot, sizeof(slot));
+ if (ret < 0) {
+ wl12xx_warning("failed to set slot time: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_group_address_tbl(struct wl12xx *wl)
+{
+ struct multicast_grp_addr_start multicast;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx group address tbl");
+
+ /* MAC filtering */
+ multicast.header.id = DOT11_GROUP_ADDRESS_TBL;
+ multicast.header.len = sizeof(multicast) - sizeof(struct acx_header);
+
+ multicast.enabled = 0;
+ multicast.num_groups = 0;
+ memset(multicast.mac_table, 0, ADDRESS_GROUP_MAX_LEN);
+
+ ret = wl12xx_cmd_configure(wl, &multicast, sizeof(multicast));
+ if (ret < 0) {
+ wl12xx_warning("failed to set group addr table: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_service_period_timeout(struct wl12xx *wl)
+{
+ struct acx_rx_timeout rx_timeout;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx service period timeout");
+
+ /* RX timeout */
+ rx_timeout.header.id = ACX_SERVICE_PERIOD_TIMEOUT;
+ rx_timeout.header.len = sizeof(rx_timeout) - sizeof(struct acx_header);
+
+ rx_timeout.ps_poll_timeout = RX_TIMEOUT_PS_POLL_DEF;
+ rx_timeout.upsd_timeout = RX_TIMEOUT_UPSD_DEF;
+
+ ret = wl12xx_cmd_configure(wl, &rx_timeout, sizeof(rx_timeout));
+ if (ret < 0) {
+ wl12xx_warning("failed to set service period timeout: %d",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold)
+{
+ struct acx_rts_threshold rts;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx rts threshold");
+
+ rts.header.id = DOT11_RTS_THRESHOLD;
+ rts.header.len = sizeof(rts) - sizeof(struct acx_header);
+
+ rts.threshold = rts_threshold;
+
+ ret = wl12xx_cmd_configure(wl, &rts, sizeof(rts));
+ if (ret < 0) {
+ wl12xx_warning("failed to set rts threshold: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl)
+{
+ struct acx_beacon_filter_option beacon_filter;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx beacon filter opt");
+
+ beacon_filter.header.id = ACX_BEACON_FILTER_OPT;
+ beacon_filter.header.len = sizeof(beacon_filter) -
+ sizeof(struct acx_header);
+
+ beacon_filter.enable = 0;
+ beacon_filter.max_num_beacons = 0;
+
+ ret = wl12xx_cmd_configure(wl, &beacon_filter, sizeof(beacon_filter));
+ if (ret < 0) {
+ wl12xx_warning("failed to set beacon filter opt: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_beacon_filter_table(struct wl12xx *wl)
+{
+ struct acx_beacon_filter_ie_table ie_table;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx beacon filter table");
+
+ ie_table.header.id = ACX_BEACON_FILTER_TABLE;
+ ie_table.header.len = sizeof(ie_table) - sizeof(struct acx_header);
+
+ ie_table.num_ie = 0;
+ memset(ie_table.table, 0, BEACON_FILTER_TABLE_MAX_SIZE);
+
+ ret = wl12xx_cmd_configure(wl, &ie_table, sizeof(ie_table));
+ if (ret < 0) {
+ wl12xx_warning("failed to set beacon filter table: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_sg_enable(struct wl12xx *wl)
+{
+ struct acx_bt_wlan_coex pta;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx sg enable");
+
+ pta.header.id = ACX_SG_ENABLE;
+ pta.header.len = sizeof(pta) - sizeof(struct acx_header);
+
+ pta.enable = SG_ENABLE;
+
+ ret = wl12xx_cmd_configure(wl, &pta, sizeof(pta));
+ if (ret < 0) {
+ wl12xx_warning("failed to set softgemini enable: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_sg_cfg(struct wl12xx *wl)
+{
+ struct acx_bt_wlan_coex_param param;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx sg cfg");
+
+ /* BT-WLAN coext parameters */
+ param.header.id = ACX_SG_CFG;
+ param.header.len = sizeof(param) - sizeof(struct acx_header);
+
+ param.min_rate = RATE_INDEX_24MBPS;
+ param.bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF;
+ param.wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF;
+ param.sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF;
+ param.rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF;
+ param.tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF;
+ param.rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF;
+ param.tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF;
+ param.wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF;
+ param.bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF;
+ param.next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF;
+ param.wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF;
+ param.hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF;
+ param.next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF;
+ param.antenna_type = PTA_ANTENNA_TYPE_DEF;
+ param.signal_type = PTA_SIGNALING_TYPE_DEF;
+ param.afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF;
+ param.quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF;
+ param.max_cts = PTA_MAX_NUM_CTS_DEF;
+ param.wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF;
+ param.bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF;
+ param.missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF;
+ param.wlan_elp_hp = PTA_ELP_HP_DEF;
+ param.bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF;
+ param.ack_mode_dual_ant = PTA_ACK_MODE_DEF;
+ param.pa_sd_enable = PTA_ALLOW_PA_SD_DEF;
+ param.pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF;
+ param.bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF;
+
+ ret = wl12xx_cmd_configure(wl, &param, sizeof(param));
+ if (ret < 0) {
+ wl12xx_warning("failed to set sg config: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_cca_threshold(struct wl12xx *wl)
+{
+ struct acx_energy_detection detection;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx cca threshold");
+
+ detection.header.id = ACX_CCA_THRESHOLD;
+ detection.header.len = sizeof(detection) - sizeof(struct acx_header);
+
+ detection.rx_cca_threshold = CCA_THRSH_DISABLE_ENERGY_D;
+ detection.tx_energy_detection = 0;
+
+ ret = wl12xx_cmd_configure(wl, &detection, sizeof(detection));
+ if (ret < 0) {
+ wl12xx_warning("failed to set cca threshold: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl)
+{
+ struct acx_beacon_broadcast bb;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx bcn dtim options");
+
+ bb.header.id = ACX_BCN_DTIM_OPTIONS;
+ bb.header.len = sizeof(bb) - sizeof(struct acx_header);
+
+ bb.beacon_rx_timeout = BCN_RX_TIMEOUT_DEF_VALUE;
+ bb.broadcast_timeout = BROADCAST_RX_TIMEOUT_DEF_VALUE;
+ bb.rx_broadcast_in_ps = RX_BROADCAST_IN_PS_DEF_VALUE;
+ bb.ps_poll_threshold = CONSECUTIVE_PS_POLL_FAILURE_DEF;
+
+ ret = wl12xx_cmd_configure(wl, &bb, sizeof(bb));
+ if (ret < 0) {
+ wl12xx_warning("failed to set rx config: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_aid(struct wl12xx *wl, u16 aid)
+{
+ struct acx_aid acx_aid;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx aid");
+
+ acx_aid.header.id = ACX_AID;
+ acx_aid.header.len = sizeof(acx_aid) - sizeof(struct acx_header);
+
+ acx_aid.aid = aid;
+
+ ret = wl12xx_cmd_configure(wl, &acx_aid, sizeof(acx_aid));
+ if (ret < 0) {
+ wl12xx_warning("failed to set aid: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask)
+{
+ struct acx_event_mask mask;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx event mbox mask");
+
+ mask.header.id = ACX_EVENT_MBOX_MASK;
+ mask.header.len = sizeof(mask) - sizeof(struct acx_header);
+
+ /* high event mask is unused */
+ mask.high_event_mask = 0xffffffff;
+
+ mask.event_mask = event_mask;
+
+ ret = wl12xx_cmd_configure(wl, &mask, sizeof(mask));
+ if (ret < 0) {
+ wl12xx_warning("failed to set aid: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble)
+{
+ struct acx_preamble ie;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx_set_preamble");
+
+ memset(&ie, 0, sizeof(ie));
+
+ ie.header.id = ACX_PREAMBLE_TYPE;
+ ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+ ie.preamble = preamble;
+ ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+ if (ret < 0) {
+ wl12xx_warning("Setting of preamble failed: %d", ret);
+ return ret;
+ }
+ return 0;
+}
+
+int wl12xx_acx_cts_protect(struct wl12xx *wl,
+ enum acx_ctsprotect_type ctsprotect)
+{
+ struct acx_ctsprotect ie;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx_set_ctsprotect");
+
+ memset(&ie, 0, sizeof(ie));
+
+ ie.header.id = ACX_CTS_PROTECTION;
+ ie.header.len = sizeof(ie) - sizeof(struct acx_header);
+ ie.ctsprotect = ctsprotect;
+ ret = wl12xx_cmd_configure(wl, &ie, sizeof(ie));
+ if (ret < 0) {
+ wl12xx_warning("Setting of ctsprotect failed: %d", ret);
+ return ret;
+ }
+ return 0;
+}
+
+int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats)
+{
+ struct wl12xx_command *answer;
+ int ret;
+
+ wl12xx_debug(DEBUG_ACX, "acx statistics");
+
+ answer = kmalloc(sizeof(*answer), GFP_KERNEL);
+ if (!answer) {
+ wl12xx_warning("could not allocate memory for acx statistics");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = wl12xx_cmd_interrogate(wl, ACX_STATISTICS, sizeof(*answer),
+ answer);
+ if (ret < 0) {
+ wl12xx_warning("acx statistics failed: %d", ret);
+ goto out;
+ }
+
+ memcpy(stats, answer->parameters, sizeof(*stats));
+
+out:
+ kfree(answer);
+ return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
new file mode 100644
index 00000000000..fb2d2340993
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -0,0 +1,1245 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_ACX_H__
+#define __WL12XX_ACX_H__
+
+#include "wl12xx.h"
+
+/* Target's information element */
+struct acx_header {
+ u16 id;
+ u16 len;
+};
+
+struct acx_error_counter {
+ struct acx_header header;
+
+ /* The number of PLCP errors since the last time this */
+ /* information element was interrogated. This field is */
+ /* automatically cleared when it is interrogated.*/
+ u32 PLCP_error;
+
+ /* The number of FCS errors since the last time this */
+ /* information element was interrogated. This field is */
+ /* automatically cleared when it is interrogated.*/
+ u32 FCS_error;
+
+ /* The number of MPDUs without PLCP header errors received*/
+ /* since the last time this information element was interrogated. */
+ /* This field is automatically cleared when it is interrogated.*/
+ u32 valid_frame;
+
+ /* the number of missed sequence numbers in the squentially */
+ /* values of frames seq numbers */
+ u32 seq_num_miss;
+} __attribute__ ((packed));
+
+struct acx_revision {
+ struct acx_header header;
+
+ /*
+ * The WiLink firmware version, an ASCII string x.x.x.x,
+ * that uniquely identifies the current firmware.
+ * The left most digit is incremented each time a
+ * significant change is made to the firmware, such as
+ * code redesign or new platform support.
+ * The second digit is incremented when major enhancements
+ * are added or major fixes are made.
+ * The third digit is incremented for each GA release.
+ * The fourth digit is incremented for each build.
+ * The first two digits identify a firmware release version,
+ * in other words, a unique set of features.
+ * The first three digits identify a GA release.
+ */
+ char fw_version[20];
+
+ /*
+ * This 4 byte field specifies the WiLink hardware version.
+ * bits 0 - 15: Reserved.
+ * bits 16 - 23: Version ID - The WiLink version ID
+ * (1 = first spin, 2 = second spin, and so on).
+ * bits 24 - 31: Chip ID - The WiLink chip ID.
+ */
+ u32 hw_version;
+} __attribute__ ((packed));
+
+enum wl12xx_psm_mode {
+ /* Active mode */
+ WL12XX_PSM_CAM = 0,
+
+ /* Power save mode */
+ WL12XX_PSM_PS = 1,
+
+ /* Extreme low power */
+ WL12XX_PSM_ELP = 2,
+};
+
+struct acx_sleep_auth {
+ struct acx_header header;
+
+ /* The sleep level authorization of the device. */
+ /* 0 - Always active*/
+ /* 1 - Power down mode: light / fast sleep*/
+ /* 2 - ELP mode: Deep / Max sleep*/
+ u8 sleep_auth;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+#define TIM_ELE_ID 5
+#define PARTIAL_VBM_MAX 251
+
+struct tim {
+ u8 identity;
+ u8 length;
+ u8 dtim_count;
+ u8 dtim_period;
+ u8 bitmap_ctrl;
+ u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
+} __attribute__ ((packed));
+
+/* Virtual Bit Map update */
+struct vbm_update_request {
+ __le16 len;
+ u8 padding[2];
+ struct tim tim;
+} __attribute__ ((packed));
+
+enum {
+ HOSTIF_PCI_MASTER_HOST_INDIRECT,
+ HOSTIF_PCI_MASTER_HOST_DIRECT,
+ HOSTIF_SLAVE,
+ HOSTIF_PKT_RING,
+ HOSTIF_DONTCARE = 0xFF
+};
+
+#define DEFAULT_UCAST_PRIORITY 0
+#define DEFAULT_RX_Q_PRIORITY 0
+#define DEFAULT_NUM_STATIONS 1
+#define DEFAULT_RXQ_PRIORITY 0 /* low 0 .. 15 high */
+#define DEFAULT_RXQ_TYPE 0x07 /* All frames, Data/Ctrl/Mgmt */
+#define TRACE_BUFFER_MAX_SIZE 256
+
+#define DP_RX_PACKET_RING_CHUNK_SIZE 1600
+#define DP_TX_PACKET_RING_CHUNK_SIZE 1600
+#define DP_RX_PACKET_RING_CHUNK_NUM 2
+#define DP_TX_PACKET_RING_CHUNK_NUM 2
+#define DP_TX_COMPLETE_TIME_OUT 20
+#define FW_TX_CMPLT_BLOCK_SIZE 16
+
+struct acx_data_path_params {
+ struct acx_header header;
+
+ u16 rx_packet_ring_chunk_size;
+ u16 tx_packet_ring_chunk_size;
+
+ u8 rx_packet_ring_chunk_num;
+ u8 tx_packet_ring_chunk_num;
+
+ /*
+ * Maximum number of packets that can be gathered
+ * in the TX complete ring before an interrupt
+ * is generated.
+ */
+ u8 tx_complete_threshold;
+
+ /* Number of pending TX complete entries in cyclic ring.*/
+ u8 tx_complete_ring_depth;
+
+ /*
+ * Max num microseconds since a packet enters the TX
+ * complete ring until an interrupt is generated.
+ */
+ u32 tx_complete_timeout;
+} __attribute__ ((packed));
+
+
+struct acx_data_path_params_resp {
+ struct acx_header header;
+
+ u16 rx_packet_ring_chunk_size;
+ u16 tx_packet_ring_chunk_size;
+
+ u8 rx_packet_ring_chunk_num;
+ u8 tx_packet_ring_chunk_num;
+
+ u8 pad[2];
+
+ u32 rx_packet_ring_addr;
+ u32 tx_packet_ring_addr;
+
+ u32 rx_control_addr;
+ u32 tx_control_addr;
+
+ u32 tx_complete_addr;
+} __attribute__ ((packed));
+
+#define TX_MSDU_LIFETIME_MIN 0
+#define TX_MSDU_LIFETIME_MAX 3000
+#define TX_MSDU_LIFETIME_DEF 512
+#define RX_MSDU_LIFETIME_MIN 0
+#define RX_MSDU_LIFETIME_MAX 0xFFFFFFFF
+#define RX_MSDU_LIFETIME_DEF 512000
+
+struct rx_msdu_lifetime {
+ struct acx_header header;
+
+ /*
+ * The maximum amount of time, in TU, before the
+ * firmware discards the MSDU.
+ */
+ u32 lifetime;
+} __attribute__ ((packed));
+
+/*
+ * RX Config Options Table
+ * Bit Definition
+ * === ==========
+ * 31:14 Reserved
+ * 13 Copy RX Status - when set, write three receive status words
+ * to top of rx'd MPDUs.
+ * When cleared, do not write three status words (added rev 1.5)
+ * 12 Reserved
+ * 11 RX Complete upon FCS error - when set, give rx complete
+ * interrupt for FCS errors, after the rx filtering, e.g. unicast
+ * frames not to us with FCS error will not generate an interrupt.
+ * 10 SSID Filter Enable - When set, the WiLink discards all beacon,
+ * probe request, and probe response frames with an SSID that does
+ * not match the SSID specified by the host in the START/JOIN
+ * command.
+ * When clear, the WiLink receives frames with any SSID.
+ * 9 Broadcast Filter Enable - When set, the WiLink discards all
+ * broadcast frames. When clear, the WiLink receives all received
+ * broadcast frames.
+ * 8:6 Reserved
+ * 5 BSSID Filter Enable - When set, the WiLink discards any frames
+ * with a BSSID that does not match the BSSID specified by the
+ * host.
+ * When clear, the WiLink receives frames from any BSSID.
+ * 4 MAC Addr Filter - When set, the WiLink discards any frames
+ * with a destination address that does not match the MAC address
+ * of the adaptor.
+ * When clear, the WiLink receives frames destined to any MAC
+ * address.
+ * 3 Promiscuous - When set, the WiLink receives all valid frames
+ * (i.e., all frames that pass the FCS check).
+ * When clear, only frames that pass the other filters specified
+ * are received.
+ * 2 FCS - When set, the WiLink includes the FCS with the received
+ * frame.
+ * When cleared, the FCS is discarded.
+ * 1 PLCP header - When set, write all data from baseband to frame
+ * buffer including PHY header.
+ * 0 Reserved - Always equal to 0.
+ *
+ * RX Filter Options Table
+ * Bit Definition
+ * === ==========
+ * 31:12 Reserved - Always equal to 0.
+ * 11 Association - When set, the WiLink receives all association
+ * related frames (association request/response, reassocation
+ * request/response, and disassociation). When clear, these frames
+ * are discarded.
+ * 10 Auth/De auth - When set, the WiLink receives all authentication
+ * and de-authentication frames. When clear, these frames are
+ * discarded.
+ * 9 Beacon - When set, the WiLink receives all beacon frames.
+ * When clear, these frames are discarded.
+ * 8 Contention Free - When set, the WiLink receives all contention
+ * free frames.
+ * When clear, these frames are discarded.
+ * 7 Control - When set, the WiLink receives all control frames.
+ * When clear, these frames are discarded.
+ * 6 Data - When set, the WiLink receives all data frames.
+ * When clear, these frames are discarded.
+ * 5 FCS Error - When set, the WiLink receives frames that have FCS
+ * errors.
+ * When clear, these frames are discarded.
+ * 4 Management - When set, the WiLink receives all management
+ * frames.
+ * When clear, these frames are discarded.
+ * 3 Probe Request - When set, the WiLink receives all probe request
+ * frames.
+ * When clear, these frames are discarded.
+ * 2 Probe Response - When set, the WiLink receives all probe
+ * response frames.
+ * When clear, these frames are discarded.
+ * 1 RTS/CTS/ACK - When set, the WiLink receives all RTS, CTS and ACK
+ * frames.
+ * When clear, these frames are discarded.
+ * 0 Rsvd Type/Sub Type - When set, the WiLink receives all frames
+ * that have reserved frame types and sub types as defined by the
+ * 802.11 specification.
+ * When clear, these frames are discarded.
+ */
+struct acx_rx_config {
+ struct acx_header header;
+
+ u32 config_options;
+ u32 filter_options;
+} __attribute__ ((packed));
+
+enum {
+ QOS_AC_BE = 0,
+ QOS_AC_BK,
+ QOS_AC_VI,
+ QOS_AC_VO,
+ QOS_HIGHEST_AC_INDEX = QOS_AC_VO,
+};
+
+#define MAX_NUM_OF_AC (QOS_HIGHEST_AC_INDEX+1)
+#define FIRST_AC_INDEX QOS_AC_BE
+#define MAX_NUM_OF_802_1d_TAGS 8
+#define AC_PARAMS_MAX_TSID 15
+#define MAX_APSD_CONF 0xffff
+
+#define QOS_TX_HIGH_MIN (0)
+#define QOS_TX_HIGH_MAX (100)
+
+#define QOS_TX_HIGH_BK_DEF (25)
+#define QOS_TX_HIGH_BE_DEF (35)
+#define QOS_TX_HIGH_VI_DEF (35)
+#define QOS_TX_HIGH_VO_DEF (35)
+
+#define QOS_TX_LOW_BK_DEF (15)
+#define QOS_TX_LOW_BE_DEF (25)
+#define QOS_TX_LOW_VI_DEF (25)
+#define QOS_TX_LOW_VO_DEF (25)
+
+struct acx_tx_queue_qos_config {
+ struct acx_header header;
+
+ u8 qid;
+ u8 pad[3];
+
+ /* Max number of blocks allowd in the queue */
+ u16 high_threshold;
+
+ /* Lowest memory blocks guaranteed for this queue */
+ u16 low_threshold;
+} __attribute__ ((packed));
+
+struct acx_packet_detection {
+ struct acx_header header;
+
+ u32 threshold;
+} __attribute__ ((packed));
+
+
+enum acx_slot_type {
+ SLOT_TIME_LONG = 0,
+ SLOT_TIME_SHORT = 1,
+ DEFAULT_SLOT_TIME = SLOT_TIME_SHORT,
+ MAX_SLOT_TIMES = 0xFF
+};
+
+#define STATION_WONE_INDEX 0
+
+struct acx_slot {
+ struct acx_header header;
+
+ u8 wone_index; /* Reserved */
+ u8 slot_time;
+ u8 reserved[6];
+} __attribute__ ((packed));
+
+
+#define ADDRESS_GROUP_MAX (8)
+#define ADDRESS_GROUP_MAX_LEN (ETH_ALEN * ADDRESS_GROUP_MAX)
+
+struct multicast_grp_addr_start {
+ struct acx_header header;
+
+ u8 enabled;
+ u8 num_groups;
+ u8 pad[2];
+ u8 mac_table[ADDRESS_GROUP_MAX_LEN];
+} __attribute__ ((packed));
+
+
+#define RX_TIMEOUT_PS_POLL_MIN 0
+#define RX_TIMEOUT_PS_POLL_MAX (200000)
+#define RX_TIMEOUT_PS_POLL_DEF (15)
+#define RX_TIMEOUT_UPSD_MIN 0
+#define RX_TIMEOUT_UPSD_MAX (200000)
+#define RX_TIMEOUT_UPSD_DEF (15)
+
+struct acx_rx_timeout {
+ struct acx_header header;
+
+ /*
+ * The longest time the STA will wait to receive
+ * traffic from the AP after a PS-poll has been
+ * transmitted.
+ */
+ u16 ps_poll_timeout;
+
+ /*
+ * The longest time the STA will wait to receive
+ * traffic from the AP after a frame has been sent
+ * from an UPSD enabled queue.
+ */
+ u16 upsd_timeout;
+} __attribute__ ((packed));
+
+#define RTS_THRESHOLD_MIN 0
+#define RTS_THRESHOLD_MAX 4096
+#define RTS_THRESHOLD_DEF 2347
+
+struct acx_rts_threshold {
+ struct acx_header header;
+
+ u16 threshold;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_beacon_filter_option {
+ struct acx_header header;
+
+ u8 enable;
+
+ /*
+ * The number of beacons without the unicast TIM
+ * bit set that the firmware buffers before
+ * signaling the host about ready frames.
+ * When set to 0 and the filter is enabled, beacons
+ * without the unicast TIM bit set are dropped.
+ */
+ u8 max_num_beacons;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+/*
+ * ACXBeaconFilterEntry (not 221)
+ * Byte Offset Size (Bytes) Definition
+ * =========== ============ ==========
+ * 0 1 IE identifier
+ * 1 1 Treatment bit mask
+ *
+ * ACXBeaconFilterEntry (221)
+ * Byte Offset Size (Bytes) Definition
+ * =========== ============ ==========
+ * 0 1 IE identifier
+ * 1 1 Treatment bit mask
+ * 2 3 OUI
+ * 5 1 Type
+ * 6 2 Version
+ *
+ *
+ * Treatment bit mask - The information element handling:
+ * bit 0 - The information element is compared and transferred
+ * in case of change.
+ * bit 1 - The information element is transferred to the host
+ * with each appearance or disappearance.
+ * Note that both bits can be set at the same time.
+ */
+#define BEACON_FILTER_TABLE_MAX_IE_NUM (32)
+#define BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM (6)
+#define BEACON_FILTER_TABLE_IE_ENTRY_SIZE (2)
+#define BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE (6)
+#define BEACON_FILTER_TABLE_MAX_SIZE ((BEACON_FILTER_TABLE_MAX_IE_NUM * \
+ BEACON_FILTER_TABLE_IE_ENTRY_SIZE) + \
+ (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \
+ BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE))
+
+struct acx_beacon_filter_ie_table {
+ struct acx_header header;
+
+ u8 num_ie;
+ u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
+ u8 pad[3];
+} __attribute__ ((packed));
+
+enum {
+ SG_ENABLE = 0,
+ SG_DISABLE,
+ SG_SENSE_NO_ACTIVITY,
+ SG_SENSE_ACTIVE
+};
+
+struct acx_bt_wlan_coex {
+ struct acx_header header;
+
+ /*
+ * 0 -> PTA enabled
+ * 1 -> PTA disabled
+ * 2 -> sense no active mode, i.e.
+ * an interrupt is sent upon
+ * BT activity.
+ * 3 -> PTA is switched on in response
+ * to the interrupt sending.
+ */
+ u8 enable;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+#define PTA_ANTENNA_TYPE_DEF (0)
+#define PTA_BT_HP_MAXTIME_DEF (2000)
+#define PTA_WLAN_HP_MAX_TIME_DEF (5000)
+#define PTA_SENSE_DISABLE_TIMER_DEF (1350)
+#define PTA_PROTECTIVE_RX_TIME_DEF (1500)
+#define PTA_PROTECTIVE_TX_TIME_DEF (1500)
+#define PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF (3000)
+#define PTA_SIGNALING_TYPE_DEF (1)
+#define PTA_AFH_LEVERAGE_ON_DEF (0)
+#define PTA_NUMBER_QUIET_CYCLE_DEF (0)
+#define PTA_MAX_NUM_CTS_DEF (3)
+#define PTA_NUMBER_OF_WLAN_PACKETS_DEF (2)
+#define PTA_NUMBER_OF_BT_PACKETS_DEF (2)
+#define PTA_PROTECTIVE_RX_TIME_FAST_DEF (1500)
+#define PTA_PROTECTIVE_TX_TIME_FAST_DEF (3000)
+#define PTA_CYCLE_TIME_FAST_DEF (8700)
+#define PTA_RX_FOR_AVALANCHE_DEF (5)
+#define PTA_ELP_HP_DEF (0)
+#define PTA_ANTI_STARVE_PERIOD_DEF (500)
+#define PTA_ANTI_STARVE_NUM_CYCLE_DEF (4)
+#define PTA_ALLOW_PA_SD_DEF (1)
+#define PTA_TIME_BEFORE_BEACON_DEF (6300)
+#define PTA_HPDM_MAX_TIME_DEF (1600)
+#define PTA_TIME_OUT_NEXT_WLAN_DEF (2550)
+#define PTA_AUTO_MODE_NO_CTS_DEF (0)
+#define PTA_BT_HP_RESPECTED_DEF (3)
+#define PTA_WLAN_RX_MIN_RATE_DEF (24)
+#define PTA_ACK_MODE_DEF (1)
+
+struct acx_bt_wlan_coex_param {
+ struct acx_header header;
+
+ /*
+ * The minimum rate of a received WLAN packet in the STA,
+ * during protective mode, of which a new BT-HP request
+ * during this Rx will always be respected and gain the antenna.
+ */
+ u32 min_rate;
+
+ /* Max time the BT HP will be respected. */
+ u16 bt_hp_max_time;
+
+ /* Max time the WLAN HP will be respected. */
+ u16 wlan_hp_max_time;
+
+ /*
+ * The time between the last BT activity
+ * and the moment when the sense mode returns
+ * to SENSE_INACTIVE.
+ */
+ u16 sense_disable_timer;
+
+ /* Time before the next BT HP instance */
+ u16 rx_time_bt_hp;
+ u16 tx_time_bt_hp;
+
+ /* range: 10-20000 default: 1500 */
+ u16 rx_time_bt_hp_fast;
+ u16 tx_time_bt_hp_fast;
+
+ /* range: 2000-65535 default: 8700 */
+ u16 wlan_cycle_fast;
+
+ /* range: 0 - 15000 (Msec) default: 1000 */
+ u16 bt_anti_starvation_period;
+
+ /* range 400-10000(Usec) default: 3000 */
+ u16 next_bt_lp_packet;
+
+ /* Deafult: worst case for BT DH5 traffic */
+ u16 wake_up_beacon;
+
+ /* range: 0-50000(Usec) default: 1050 */
+ u16 hp_dm_max_guard_time;
+
+ /*
+ * This is to prevent both BT & WLAN antenna
+ * starvation.
+ * Range: 100-50000(Usec) default:2550
+ */
+ u16 next_wlan_packet;
+
+ /* 0 -> shared antenna */
+ u8 antenna_type;
+
+ /*
+ * 0 -> TI legacy
+ * 1 -> Palau
+ */
+ u8 signal_type;
+
+ /*
+ * BT AFH status
+ * 0 -> no AFH
+ * 1 -> from dedicated GPIO
+ * 2 -> AFH on (from host)
+ */
+ u8 afh_leverage_on;
+
+ /*
+ * The number of cycles during which no
+ * TX will be sent after 1 cycle of RX
+ * transaction in protective mode
+ */
+ u8 quiet_cycle_num;
+
+ /*
+ * The maximum number of CTSs that will
+ * be sent for receiving RX packet in
+ * protective mode
+ */
+ u8 max_cts;
+
+ /*
+ * The number of WLAN packets
+ * transferred in common mode before
+ * switching to BT.
+ */
+ u8 wlan_packets_num;
+
+ /*
+ * The number of BT packets
+ * transferred in common mode before
+ * switching to WLAN.
+ */
+ u8 bt_packets_num;
+
+ /* range: 1-255 default: 5 */
+ u8 missed_rx_avalanche;
+
+ /* range: 0-1 default: 1 */
+ u8 wlan_elp_hp;
+
+ /* range: 0 - 15 default: 4 */
+ u8 bt_anti_starvation_cycles;
+
+ u8 ack_mode_dual_ant;
+
+ /*
+ * Allow PA_SD assertion/de-assertion
+ * during enabled BT activity.
+ */
+ u8 pa_sd_enable;
+
+ /*
+ * Enable/Disable PTA in auto mode:
+ * Support Both Active & P.S modes
+ */
+ u8 pta_auto_mode_enable;
+
+ /* range: 0 - 20 default: 1 */
+ u8 bt_hp_respected_num;
+} __attribute__ ((packed));
+
+#define CCA_THRSH_ENABLE_ENERGY_D 0x140A
+#define CCA_THRSH_DISABLE_ENERGY_D 0xFFEF
+
+struct acx_energy_detection {
+ struct acx_header header;
+
+ /* The RX Clear Channel Assessment threshold in the PHY */
+ u16 rx_cca_threshold;
+ u8 tx_energy_detection;
+ u8 pad;
+} __attribute__ ((packed));
+
+#define BCN_RX_TIMEOUT_DEF_VALUE 10000
+#define BROADCAST_RX_TIMEOUT_DEF_VALUE 20000
+#define RX_BROADCAST_IN_PS_DEF_VALUE 1
+#define CONSECUTIVE_PS_POLL_FAILURE_DEF 4
+
+struct acx_beacon_broadcast {
+ struct acx_header header;
+
+ u16 beacon_rx_timeout;
+ u16 broadcast_timeout;
+
+ /* Enables receiving of broadcast packets in PS mode */
+ u8 rx_broadcast_in_ps;
+
+ /* Consecutive PS Poll failures before updating the host */
+ u8 ps_poll_threshold;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_event_mask {
+ struct acx_header header;
+
+ u32 event_mask;
+ u32 high_event_mask; /* Unused */
+} __attribute__ ((packed));
+
+#define CFG_RX_FCS BIT(2)
+#define CFG_RX_ALL_GOOD BIT(3)
+#define CFG_UNI_FILTER_EN BIT(4)
+#define CFG_BSSID_FILTER_EN BIT(5)
+#define CFG_MC_FILTER_EN BIT(6)
+#define CFG_MC_ADDR0_EN BIT(7)
+#define CFG_MC_ADDR1_EN BIT(8)
+#define CFG_BC_REJECT_EN BIT(9)
+#define CFG_SSID_FILTER_EN BIT(10)
+#define CFG_RX_INT_FCS_ERROR BIT(11)
+#define CFG_RX_INT_ENCRYPTED BIT(12)
+#define CFG_RX_WR_RX_STATUS BIT(13)
+#define CFG_RX_FILTER_NULTI BIT(14)
+#define CFG_RX_RESERVE BIT(15)
+#define CFG_RX_TIMESTAMP_TSF BIT(16)
+
+#define CFG_RX_RSV_EN BIT(0)
+#define CFG_RX_RCTS_ACK BIT(1)
+#define CFG_RX_PRSP_EN BIT(2)
+#define CFG_RX_PREQ_EN BIT(3)
+#define CFG_RX_MGMT_EN BIT(4)
+#define CFG_RX_FCS_ERROR BIT(5)
+#define CFG_RX_DATA_EN BIT(6)
+#define CFG_RX_CTL_EN BIT(7)
+#define CFG_RX_CF_EN BIT(8)
+#define CFG_RX_BCN_EN BIT(9)
+#define CFG_RX_AUTH_EN BIT(10)
+#define CFG_RX_ASSOC_EN BIT(11)
+
+#define SCAN_PASSIVE BIT(0)
+#define SCAN_5GHZ_BAND BIT(1)
+#define SCAN_TRIGGERED BIT(2)
+#define SCAN_PRIORITY_HIGH BIT(3)
+
+struct acx_fw_gen_frame_rates {
+ struct acx_header header;
+
+ u8 tx_ctrl_frame_rate; /* RATE_* */
+ u8 tx_ctrl_frame_mod; /* CCK_* or PBCC_* */
+ u8 tx_mgt_frame_rate;
+ u8 tx_mgt_frame_mod;
+} __attribute__ ((packed));
+
+/* STA MAC */
+struct dot11_station_id {
+ struct acx_header header;
+
+ u8 mac[ETH_ALEN];
+ u8 pad[2];
+} __attribute__ ((packed));
+
+/* HW encryption keys */
+#define NUM_ACCESS_CATEGORIES_COPY 4
+#define MAX_KEY_SIZE 32
+
+/* When set, disable HW encryption */
+#define DF_ENCRYPTION_DISABLE 0x01
+/* When set, disable HW decryption */
+#define DF_SNIFF_MODE_ENABLE 0x80
+
+struct acx_feature_config {
+ struct acx_header header;
+
+ u32 options;
+ u32 data_flow_options;
+} __attribute__ ((packed));
+
+enum acx_key_action {
+ KEY_ADD_OR_REPLACE = 1,
+ KEY_REMOVE = 2,
+ KEY_SET_ID = 3,
+ MAX_KEY_ACTION = 0xffff,
+};
+
+enum acx_key_type {
+ KEY_WEP_DEFAULT = 0,
+ KEY_WEP_ADDR = 1,
+ KEY_AES_GROUP = 4,
+ KEY_AES_PAIRWISE = 5,
+ KEY_WEP_GROUP = 6,
+ KEY_TKIP_MIC_GROUP = 10,
+ KEY_TKIP_MIC_PAIRWISE = 11,
+};
+
+/*
+ *
+ * key_type_e key size key format
+ * ---------- --------- ----------
+ * 0x00 5, 13, 29 Key data
+ * 0x01 5, 13, 29 Key data
+ * 0x04 16 16 bytes of key data
+ * 0x05 16 16 bytes of key data
+ * 0x0a 32 16 bytes of TKIP key data
+ * 8 bytes of RX MIC key data
+ * 8 bytes of TX MIC key data
+ * 0x0b 32 16 bytes of TKIP key data
+ * 8 bytes of RX MIC key data
+ * 8 bytes of TX MIC key data
+ *
+ */
+
+struct acx_set_key {
+ /* Ignored for default WEP key */
+ u8 addr[ETH_ALEN];
+
+ /* key_action_e */
+ u16 key_action;
+
+ u16 reserved_1;
+
+ /* key size in bytes */
+ u8 key_size;
+
+ /* key_type_e */
+ u8 key_type;
+ u8 ssid_profile;
+
+ /*
+ * TKIP, AES: frame's key id field.
+ * For WEP default key: key id;
+ */
+ u8 id;
+ u8 reserved_2[6];
+ u8 key[MAX_KEY_SIZE];
+ u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
+ u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
+} __attribute__ ((packed));
+
+struct acx_current_tx_power {
+ struct acx_header header;
+
+ u8 current_tx_power;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+struct acx_dot11_default_key {
+ struct acx_header header;
+
+ u8 id;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+struct acx_tsf_info {
+ struct acx_header header;
+
+ u32 current_tsf_msb;
+ u32 current_tsf_lsb;
+ u32 last_TBTT_msb;
+ u32 last_TBTT_lsb;
+ u8 last_dtim_count;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+/* 802.11 PS */
+enum acx_ps_mode {
+ STATION_ACTIVE_MODE,
+ STATION_POWER_SAVE_MODE
+};
+
+struct acx_ps_params {
+ u8 ps_mode; /* STATION_* */
+ u8 send_null_data; /* Do we have to send NULL data packet ? */
+ u8 retries; /* Number of retires for the initial NULL data packet */
+
+ /*
+ * TUs during which the target stays awake after switching
+ * to power save mode.
+ */
+ u8 hang_over_period;
+ u16 null_data_rate;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+enum acx_wake_up_event {
+ WAKE_UP_EVENT_BEACON_BITMAP = 0x01, /* Wake on every Beacon*/
+ WAKE_UP_EVENT_DTIM_BITMAP = 0x02, /* Wake on every DTIM*/
+ WAKE_UP_EVENT_N_DTIM_BITMAP = 0x04, /* Wake on every Nth DTIM */
+ WAKE_UP_EVENT_N_BEACONS_BITMAP = 0x08, /* Wake on every Nth Beacon */
+ WAKE_UP_EVENT_BITS_MASK = 0x0F
+};
+
+struct acx_wake_up_condition {
+ struct acx_header header;
+
+ u8 wake_up_event; /* Only one bit can be set */
+ u8 listen_interval;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+struct acx_aid {
+ struct acx_header header;
+
+ /*
+ * To be set when associated with an AP.
+ */
+ u16 aid;
+ u8 pad[2];
+} __attribute__ ((packed));
+
+enum acx_preamble_type {
+ ACX_PREAMBLE_LONG = 0,
+ ACX_PREAMBLE_SHORT = 1
+};
+
+struct acx_preamble {
+ struct acx_header header;
+ /*
+ * When set, the WiLink transmits the frames with a short preamble and
+ * when cleared, the WiLink transmits the frames with a long preamble.
+ */
+ u8 preamble;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+enum acx_ctsprotect_type {
+ CTSPROTECT_DISABLE = 0,
+ CTSPROTECT_ENABLE = 1
+};
+
+struct acx_ctsprotect {
+ struct acx_header header;
+ u8 ctsprotect;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+struct acx_tx_statistics {
+ u32 internal_desc_overflow;
+} __attribute__ ((packed));
+
+struct acx_rx_statistics {
+ u32 out_of_mem;
+ u32 hdr_overflow;
+ u32 hw_stuck;
+ u32 dropped;
+ u32 fcs_err;
+ u32 xfr_hint_trig;
+ u32 path_reset;
+ u32 reset_counter;
+} __attribute__ ((packed));
+
+struct acx_dma_statistics {
+ u32 rx_requested;
+ u32 rx_errors;
+ u32 tx_requested;
+ u32 tx_errors;
+} __attribute__ ((packed));
+
+struct acx_isr_statistics {
+ /* host command complete */
+ u32 cmd_cmplt;
+
+ /* fiqisr() */
+ u32 fiqs;
+
+ /* (INT_STS_ND & INT_TRIG_RX_HEADER) */
+ u32 rx_headers;
+
+ /* (INT_STS_ND & INT_TRIG_RX_CMPLT) */
+ u32 rx_completes;
+
+ /* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */
+ u32 rx_mem_overflow;
+
+ /* (INT_STS_ND & INT_TRIG_S_RX_RDY) */
+ u32 rx_rdys;
+
+ /* irqisr() */
+ u32 irqs;
+
+ /* (INT_STS_ND & INT_TRIG_TX_PROC) */
+ u32 tx_procs;
+
+ /* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */
+ u32 decrypt_done;
+
+ /* (INT_STS_ND & INT_TRIG_DMA0) */
+ u32 dma0_done;
+
+ /* (INT_STS_ND & INT_TRIG_DMA1) */
+ u32 dma1_done;
+
+ /* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */
+ u32 tx_exch_complete;
+
+ /* (INT_STS_ND & INT_TRIG_COMMAND) */
+ u32 commands;
+
+ /* (INT_STS_ND & INT_TRIG_RX_PROC) */
+ u32 rx_procs;
+
+ /* (INT_STS_ND & INT_TRIG_PM_802) */
+ u32 hw_pm_mode_changes;
+
+ /* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */
+ u32 host_acknowledges;
+
+ /* (INT_STS_ND & INT_TRIG_PM_PCI) */
+ u32 pci_pm;
+
+ /* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */
+ u32 wakeups;
+
+ /* (INT_STS_ND & INT_TRIG_LOW_RSSI) */
+ u32 low_rssi;
+} __attribute__ ((packed));
+
+struct acx_wep_statistics {
+ /* WEP address keys configured */
+ u32 addr_key_count;
+
+ /* default keys configured */
+ u32 default_key_count;
+
+ u32 reserved;
+
+ /* number of times that WEP key not found on lookup */
+ u32 key_not_found;
+
+ /* number of times that WEP key decryption failed */
+ u32 decrypt_fail;
+
+ /* WEP packets decrypted */
+ u32 packets;
+
+ /* WEP decrypt interrupts */
+ u32 interrupt;
+} __attribute__ ((packed));
+
+#define ACX_MISSED_BEACONS_SPREAD 10
+
+struct acx_pwr_statistics {
+ /* the amount of enters into power save mode (both PD & ELP) */
+ u32 ps_enter;
+
+ /* the amount of enters into ELP mode */
+ u32 elp_enter;
+
+ /* the amount of missing beacon interrupts to the host */
+ u32 missing_bcns;
+
+ /* the amount of wake on host-access times */
+ u32 wake_on_host;
+
+ /* the amount of wake on timer-expire */
+ u32 wake_on_timer_exp;
+
+ /* the number of packets that were transmitted with PS bit set */
+ u32 tx_with_ps;
+
+ /* the number of packets that were transmitted with PS bit clear */
+ u32 tx_without_ps;
+
+ /* the number of received beacons */
+ u32 rcvd_beacons;
+
+ /* the number of entering into PowerOn (power save off) */
+ u32 power_save_off;
+
+ /* the number of entries into power save mode */
+ u16 enable_ps;
+
+ /*
+ * the number of exits from power save, not including failed PS
+ * transitions
+ */
+ u16 disable_ps;
+
+ /*
+ * the number of times the TSF counter was adjusted because
+ * of drift
+ */
+ u32 fix_tsf_ps;
+
+ /* Gives statistics about the spread continuous missed beacons.
+ * The 16 LSB are dedicated for the PS mode.
+ * The 16 MSB are dedicated for the PS mode.
+ * cont_miss_bcns_spread[0] - single missed beacon.
+ * cont_miss_bcns_spread[1] - two continuous missed beacons.
+ * cont_miss_bcns_spread[2] - three continuous missed beacons.
+ * ...
+ * cont_miss_bcns_spread[9] - ten and more continuous missed beacons.
+ */
+ u32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
+
+ /* the number of beacons in awake mode */
+ u32 rcvd_awake_beacons;
+} __attribute__ ((packed));
+
+struct acx_mic_statistics {
+ u32 rx_pkts;
+ u32 calc_failure;
+} __attribute__ ((packed));
+
+struct acx_aes_statistics {
+ u32 encrypt_fail;
+ u32 decrypt_fail;
+ u32 encrypt_packets;
+ u32 decrypt_packets;
+ u32 encrypt_interrupt;
+ u32 decrypt_interrupt;
+} __attribute__ ((packed));
+
+struct acx_event_statistics {
+ u32 heart_beat;
+ u32 calibration;
+ u32 rx_mismatch;
+ u32 rx_mem_empty;
+ u32 rx_pool;
+ u32 oom_late;
+ u32 phy_transmit_error;
+ u32 tx_stuck;
+} __attribute__ ((packed));
+
+struct acx_ps_statistics {
+ u32 pspoll_timeouts;
+ u32 upsd_timeouts;
+ u32 upsd_max_sptime;
+ u32 upsd_max_apturn;
+ u32 pspoll_max_apturn;
+ u32 pspoll_utilization;
+ u32 upsd_utilization;
+} __attribute__ ((packed));
+
+struct acx_rxpipe_statistics {
+ u32 rx_prep_beacon_drop;
+ u32 descr_host_int_trig_rx_data;
+ u32 beacon_buffer_thres_host_int_trig_rx_data;
+ u32 missed_beacon_host_int_trig_rx_data;
+ u32 tx_xfr_host_int_trig_rx_data;
+} __attribute__ ((packed));
+
+struct acx_statistics {
+ struct acx_header header;
+
+ struct acx_tx_statistics tx;
+ struct acx_rx_statistics rx;
+ struct acx_dma_statistics dma;
+ struct acx_isr_statistics isr;
+ struct acx_wep_statistics wep;
+ struct acx_pwr_statistics pwr;
+ struct acx_aes_statistics aes;
+ struct acx_mic_statistics mic;
+ struct acx_event_statistics event;
+ struct acx_ps_statistics ps;
+ struct acx_rxpipe_statistics rxpipe;
+} __attribute__ ((packed));
+
+enum {
+ ACX_WAKE_UP_CONDITIONS = 0x0002,
+ ACX_MEM_CFG = 0x0003,
+ ACX_SLOT = 0x0004,
+ ACX_QUEUE_HEAD = 0x0005, /* for MASTER mode only */
+ ACX_AC_CFG = 0x0007,
+ ACX_MEM_MAP = 0x0008,
+ ACX_AID = 0x000A,
+ ACX_RADIO_PARAM = 0x000B, /* Not used */
+ ACX_CFG = 0x000C, /* Not used */
+ ACX_FW_REV = 0x000D,
+ ACX_MEDIUM_USAGE = 0x000F,
+ ACX_RX_CFG = 0x0010,
+ ACX_TX_QUEUE_CFG = 0x0011, /* FIXME: only used by wl1251 */
+ ACX_BSS_IN_PS = 0x0012, /* for AP only */
+ ACX_STATISTICS = 0x0013, /* Debug API */
+ ACX_FEATURE_CFG = 0x0015,
+ ACX_MISC_CFG = 0x0017, /* Not used */
+ ACX_TID_CFG = 0x001A,
+ ACX_BEACON_FILTER_OPT = 0x001F,
+ ACX_LOW_RSSI = 0x0020,
+ ACX_NOISE_HIST = 0x0021,
+ ACX_HDK_VERSION = 0x0022, /* ??? */
+ ACX_PD_THRESHOLD = 0x0023,
+ ACX_DATA_PATH_PARAMS = 0x0024, /* WO */
+ ACX_DATA_PATH_RESP_PARAMS = 0x0024, /* RO */
+ ACX_CCA_THRESHOLD = 0x0025,
+ ACX_EVENT_MBOX_MASK = 0x0026,
+#ifdef FW_RUNNING_AS_AP
+ ACX_DTIM_PERIOD = 0x0027, /* for AP only */
+#else
+ ACX_WR_TBTT_AND_DTIM = 0x0027, /* STA only */
+#endif
+ ACX_ACI_OPTION_CFG = 0x0029, /* OBSOLETE (for 1251)*/
+ ACX_GPIO_CFG = 0x002A, /* Not used */
+ ACX_GPIO_SET = 0x002B, /* Not used */
+ ACX_PM_CFG = 0x002C, /* To Be Documented */
+ ACX_CONN_MONIT_PARAMS = 0x002D,
+ ACX_AVERAGE_RSSI = 0x002E, /* Not used */
+ ACX_CONS_TX_FAILURE = 0x002F,
+ ACX_BCN_DTIM_OPTIONS = 0x0031,
+ ACX_SG_ENABLE = 0x0032,
+ ACX_SG_CFG = 0x0033,
+ ACX_ANTENNA_DIVERSITY_CFG = 0x0035, /* To Be Documented */
+ ACX_LOW_SNR = 0x0037, /* To Be Documented */
+ ACX_BEACON_FILTER_TABLE = 0x0038,
+ ACX_ARP_IP_FILTER = 0x0039,
+ ACX_ROAMING_STATISTICS_TBL = 0x003B,
+ ACX_RATE_POLICY = 0x003D,
+ ACX_CTS_PROTECTION = 0x003E,
+ ACX_SLEEP_AUTH = 0x003F,
+ ACX_PREAMBLE_TYPE = 0x0040,
+ ACX_ERROR_CNT = 0x0041,
+ ACX_FW_GEN_FRAME_RATES = 0x0042,
+ ACX_IBSS_FILTER = 0x0044,
+ ACX_SERVICE_PERIOD_TIMEOUT = 0x0045,
+ ACX_TSF_INFO = 0x0046,
+ ACX_CONFIG_PS_WMM = 0x0049,
+ ACX_ENABLE_RX_DATA_FILTER = 0x004A,
+ ACX_SET_RX_DATA_FILTER = 0x004B,
+ ACX_GET_DATA_FILTER_STATISTICS = 0x004C,
+ ACX_POWER_LEVEL_TABLE = 0x004D,
+ ACX_BET_ENABLE = 0x0050,
+ DOT11_STATION_ID = 0x1001,
+ DOT11_RX_MSDU_LIFE_TIME = 0x1004,
+ DOT11_CUR_TX_PWR = 0x100D,
+ DOT11_DEFAULT_KEY = 0x1010,
+ DOT11_RX_DOT11_MODE = 0x1012,
+ DOT11_RTS_THRESHOLD = 0x1013,
+ DOT11_GROUP_ADDRESS_TBL = 0x1014,
+
+ MAX_DOT11_IE = DOT11_GROUP_ADDRESS_TBL,
+
+ MAX_IE = 0xFFFF
+};
+
+
+int wl12xx_acx_frame_rates(struct wl12xx *wl, u8 ctrl_rate, u8 ctrl_mod,
+ u8 mgt_rate, u8 mgt_mod);
+int wl12xx_acx_station_id(struct wl12xx *wl);
+int wl12xx_acx_default_key(struct wl12xx *wl, u8 key_id);
+int wl12xx_acx_wake_up_conditions(struct wl12xx *wl, u8 listen_interval);
+int wl12xx_acx_sleep_auth(struct wl12xx *wl, u8 sleep_auth);
+int wl12xx_acx_fw_version(struct wl12xx *wl, char *buf, size_t len);
+int wl12xx_acx_tx_power(struct wl12xx *wl, int power);
+int wl12xx_acx_feature_cfg(struct wl12xx *wl);
+int wl12xx_acx_mem_map(struct wl12xx *wl, void *mem_map, size_t len);
+int wl12xx_acx_data_path_params(struct wl12xx *wl,
+ struct acx_data_path_params_resp *data_path);
+int wl12xx_acx_rx_msdu_life_time(struct wl12xx *wl, u32 life_time);
+int wl12xx_acx_rx_config(struct wl12xx *wl, u32 config, u32 filter);
+int wl12xx_acx_pd_threshold(struct wl12xx *wl);
+int wl12xx_acx_slot(struct wl12xx *wl, enum acx_slot_type slot_time);
+int wl12xx_acx_group_address_tbl(struct wl12xx *wl);
+int wl12xx_acx_service_period_timeout(struct wl12xx *wl);
+int wl12xx_acx_rts_threshold(struct wl12xx *wl, u16 rts_threshold);
+int wl12xx_acx_beacon_filter_opt(struct wl12xx *wl);
+int wl12xx_acx_beacon_filter_table(struct wl12xx *wl);
+int wl12xx_acx_sg_enable(struct wl12xx *wl);
+int wl12xx_acx_sg_cfg(struct wl12xx *wl);
+int wl12xx_acx_cca_threshold(struct wl12xx *wl);
+int wl12xx_acx_bcn_dtim_options(struct wl12xx *wl);
+int wl12xx_acx_aid(struct wl12xx *wl, u16 aid);
+int wl12xx_acx_event_mbox_mask(struct wl12xx *wl, u32 event_mask);
+int wl12xx_acx_set_preamble(struct wl12xx *wl, enum acx_preamble_type preamble);
+int wl12xx_acx_cts_protect(struct wl12xx *wl,
+ enum acx_ctsprotect_type ctsprotect);
+int wl12xx_acx_statistics(struct wl12xx *wl, struct acx_statistics *stats);
+
+#endif /* __WL12XX_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
new file mode 100644
index 00000000000..48ac08c429b
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -0,0 +1,295 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gpio.h>
+
+#include "reg.h"
+#include "boot.h"
+#include "spi.h"
+#include "event.h"
+
+static void wl12xx_boot_enable_interrupts(struct wl12xx *wl)
+{
+ enable_irq(wl->irq);
+}
+
+void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl)
+{
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+ wl12xx_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+}
+
+int wl12xx_boot_soft_reset(struct wl12xx *wl)
+{
+ unsigned long timeout;
+ u32 boot_data;
+
+ /* perform soft reset */
+ wl12xx_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+
+ /* SOFT_RESET is self clearing */
+ timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
+ while (1) {
+ boot_data = wl12xx_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
+ wl12xx_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
+ if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
+ break;
+
+ if (time_after(jiffies, timeout)) {
+ /* 1.2 check pWhalBus->uSelfClearTime if the
+ * timeout was reached */
+ wl12xx_error("soft reset timeout");
+ return -1;
+ }
+
+ udelay(SOFT_RESET_STALL_TIME);
+ }
+
+ /* disable Rx/Tx */
+ wl12xx_reg_write32(wl, ENABLE, 0x0);
+
+ /* disable auto calibration on start*/
+ wl12xx_reg_write32(wl, SPARE_A2, 0xffff);
+
+ return 0;
+}
+
+int wl12xx_boot_init_seq(struct wl12xx *wl)
+{
+ u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq;
+
+ /*
+ * col #1: INTEGER_DIVIDER
+ * col #2: FRACTIONAL_DIVIDER
+ * col #3: ATTN_BB
+ * col #4: ALPHA_BB
+ * col #5: STOP_TIME_BB
+ * col #6: BB_PLL_LOOP_FILTER
+ */
+ static const u32 LUT[REF_FREQ_NUM][LUT_PARAM_NUM] = {
+
+ { 83, 87381, 0xB, 5, 0xF00, 3}, /* REF_FREQ_19_2*/
+ { 61, 141154, 0xB, 5, 0x1450, 2}, /* REF_FREQ_26_0*/
+ { 41, 174763, 0xC, 6, 0x2D00, 1}, /* REF_FREQ_38_4*/
+ { 40, 0, 0xC, 6, 0x2EE0, 1}, /* REF_FREQ_40_0*/
+ { 47, 162280, 0xC, 6, 0x2760, 1} /* REF_FREQ_33_6 */
+ };
+
+ /* read NVS params */
+ scr_pad6 = wl12xx_reg_read32(wl, SCR_PAD6);
+ wl12xx_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6);
+
+ /* read ELP_CMD */
+ elp_cmd = wl12xx_reg_read32(wl, ELP_CMD);
+ wl12xx_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd);
+
+ /* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */
+ ref_freq = scr_pad6 & 0x000000FF;
+ wl12xx_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq);
+
+ wl12xx_reg_write32(wl, PLL_CAL_TIME, 0x9);
+
+ /*
+ * PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME)
+ */
+ wl12xx_reg_write32(wl, CLK_BUF_TIME, 0x6);
+
+ /*
+ * set the clock detect feature to work in the restart wu procedure
+ * (ELP_CFG_MODE[14]) and Select the clock source type
+ * (ELP_CFG_MODE[13:12])
+ */
+ tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000;
+ wl12xx_reg_write32(wl, ELP_CFG_MODE, tmp);
+
+ /* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */
+ elp_cmd |= 0x00000040;
+ wl12xx_reg_write32(wl, ELP_CMD, elp_cmd);
+
+ /* PG 1.2: Set the BB PLL stable time to be 1000usec
+ * (PLL_STABLE_TIME) */
+ wl12xx_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20);
+
+ /* PG 1.2: read clock request time */
+ init_data = wl12xx_reg_read32(wl, CLK_REQ_TIME);
+
+ /*
+ * PG 1.2: set the clock request time to be ref_clk_settling_time -
+ * 1ms = 4ms
+ */
+ if (init_data > 0x21)
+ tmp = init_data - 0x21;
+ else
+ tmp = 0;
+ wl12xx_reg_write32(wl, CLK_REQ_TIME, tmp);
+
+ /* set BB PLL configurations in RF AFE */
+ wl12xx_reg_write32(wl, 0x003058cc, 0x4B5);
+
+ /* set RF_AFE_REG_5 */
+ wl12xx_reg_write32(wl, 0x003058d4, 0x50);
+
+ /* set RF_AFE_CTRL_REG_2 */
+ wl12xx_reg_write32(wl, 0x00305948, 0x11c001);
+
+ /*
+ * change RF PLL and BB PLL divider for VCO clock and adjust VCO
+ * bais current(RF_AFE_REG_13)
+ */
+ wl12xx_reg_write32(wl, 0x003058f4, 0x1e);
+
+ /* set BB PLL configurations */
+ tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000;
+ wl12xx_reg_write32(wl, 0x00305840, tmp);
+
+ /* set fractional divider according to Appendix C-BB PLL
+ * Calculations
+ */
+ tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER];
+ wl12xx_reg_write32(wl, 0x00305844, tmp);
+
+ /* set the initial data for the sigma delta */
+ wl12xx_reg_write32(wl, 0x00305848, 0x3039);
+
+ /*
+ * set the accumulator attenuation value, calibration loop1
+ * (alpha), calibration loop2 (beta), calibration loop3 (gamma) and
+ * the VCO gain
+ */
+ tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) |
+ (LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1;
+ wl12xx_reg_write32(wl, 0x00305854, tmp);
+
+ /*
+ * set the calibration stop time after holdoff time expires and set
+ * settling time HOLD_OFF_TIME_BB
+ */
+ tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000;
+ wl12xx_reg_write32(wl, 0x00305858, tmp);
+
+ /*
+ * set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL
+ * constant leakage current to linearize PFD to 0uA -
+ * BB_ILOOPF[7:3]
+ */
+ tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030;
+ wl12xx_reg_write32(wl, 0x003058f8, tmp);
+
+ /*
+ * set regulator output voltage for n divider to
+ * 1.35-BB_REFDIV[1:0], set charge pump current- BB_CPGAIN[4:2],
+ * set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB
+ * PLL auto-call to normal mode- BB_CALGAIN_3DB[8]
+ */
+ wl12xx_reg_write32(wl, 0x003058f0, 0x29);
+
+ /* enable restart wakeup sequence (ELP_CMD[0]) */
+ wl12xx_reg_write32(wl, ELP_CMD, elp_cmd | 0x1);
+
+ /* restart sequence completed */
+ udelay(2000);
+
+ return 0;
+}
+
+int wl12xx_boot_run_firmware(struct wl12xx *wl)
+{
+ int loop, ret;
+ u32 chip_id, interrupt;
+
+ wl->chip.op_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+
+ chip_id = wl12xx_reg_read32(wl, CHIP_ID_B);
+
+ wl12xx_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
+
+ if (chip_id != wl->chip.id) {
+ wl12xx_error("chip id doesn't match after firmware boot");
+ return -EIO;
+ }
+
+ /* wait for init to complete */
+ loop = 0;
+ while (loop++ < INIT_LOOP) {
+ udelay(INIT_LOOP_DELAY);
+ interrupt = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+
+ if (interrupt == 0xffffffff) {
+ wl12xx_error("error reading hardware complete "
+ "init indication");
+ return -EIO;
+ }
+ /* check that ACX_INTR_INIT_COMPLETE is enabled */
+ else if (interrupt & wl->chip.intr_init_complete) {
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+ wl->chip.intr_init_complete);
+ break;
+ }
+ }
+
+ if (loop >= INIT_LOOP) {
+ wl12xx_error("timeout waiting for the hardware to "
+ "complete initialization");
+ return -EIO;
+ }
+
+ /* get hardware config command mail box */
+ wl->cmd_box_addr = wl12xx_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
+
+ /* get hardware config event mail box */
+ wl->event_box_addr = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+
+ /* set the working partition to its "running" mode offset */
+ wl12xx_set_partition(wl,
+ wl->chip.p_table[PART_WORK].mem.start,
+ wl->chip.p_table[PART_WORK].mem.size,
+ wl->chip.p_table[PART_WORK].reg.start,
+ wl->chip.p_table[PART_WORK].reg.size);
+
+ wl12xx_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
+ wl->cmd_box_addr, wl->event_box_addr);
+
+ /*
+ * in case of full asynchronous mode the firmware event must be
+ * ready to receive event from the command mailbox
+ */
+
+ /* enable gpio interrupts */
+ wl12xx_boot_enable_interrupts(wl);
+
+ wl->chip.op_target_enable_interrupts(wl);
+
+ /* unmask all mbox events */
+ wl->event_mask = 0xffffffff;
+
+ ret = wl12xx_event_unmask(wl);
+ if (ret < 0) {
+ wl12xx_error("EVENT mask setting failed");
+ return ret;
+ }
+
+ wl12xx_event_mbox_config(wl);
+
+ /* firmware startup completed */
+ return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
new file mode 100644
index 00000000000..4fa73132baa
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/boot.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __BOOT_H__
+#define __BOOT_H__
+
+#include "wl12xx.h"
+
+int wl12xx_boot_soft_reset(struct wl12xx *wl);
+int wl12xx_boot_init_seq(struct wl12xx *wl);
+int wl12xx_boot_run_firmware(struct wl12xx *wl);
+void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl);
+
+/* number of times we try to read the INIT interrupt */
+#define INIT_LOOP 20000
+
+/* delay between retries */
+#define INIT_LOOP_DELAY 50
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
new file mode 100644
index 00000000000..f73ab602b7a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -0,0 +1,353 @@
+#include "cmd.h"
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len)
+{
+ struct wl12xx_command cmd;
+ unsigned long timeout;
+ size_t cmd_len;
+ u32 intr;
+ int ret = 0;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.id = type;
+ cmd.status = 0;
+ memcpy(cmd.parameters, buf, buf_len);
+ cmd_len = ALIGN(buf_len, 4) + CMDMBOX_HEADER_LEN;
+
+ wl12xx_ps_elp_wakeup(wl);
+
+ wl12xx_spi_mem_write(wl, wl->cmd_box_addr, &cmd, cmd_len);
+
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+
+ timeout = jiffies + msecs_to_jiffies(WL12XX_COMMAND_TIMEOUT);
+
+ intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+ while (!(intr & wl->chip.intr_cmd_complete)) {
+ if (time_after(jiffies, timeout)) {
+ wl12xx_error("command complete timeout");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ msleep(1);
+
+ intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+ }
+
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+ wl->chip.intr_cmd_complete);
+
+out:
+ wl12xx_ps_elp_sleep(wl);
+
+ return ret;
+}
+
+int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer)
+{
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd test");
+
+ ret = wl12xx_cmd_send(wl, CMD_TEST, buf, buf_len);
+ if (ret < 0) {
+ wl12xx_warning("TEST command failed");
+ return ret;
+ }
+
+ if (answer) {
+ struct wl12xx_command *cmd_answer;
+
+ /*
+ * The test command got in, we can read the answer.
+ * The answer would be a wl12xx_command, where the
+ * parameter array contains the actual answer.
+ */
+
+ wl12xx_ps_elp_wakeup(wl);
+
+ wl12xx_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
+
+ wl12xx_ps_elp_sleep(wl);
+
+ cmd_answer = buf;
+ if (cmd_answer->status != CMD_STATUS_SUCCESS)
+ wl12xx_error("TEST command answer error: %d",
+ cmd_answer->status);
+ }
+
+ return 0;
+}
+
+
+int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len,
+ void *answer)
+{
+ struct wl12xx_command *cmd;
+ struct acx_header header;
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd interrogate");
+
+ header.id = ie_id;
+ header.len = ie_len - sizeof(header);
+
+ ret = wl12xx_cmd_send(wl, CMD_INTERROGATE, &header, sizeof(header));
+ if (ret < 0) {
+ wl12xx_error("INTERROGATE command failed");
+ return ret;
+ }
+
+ wl12xx_ps_elp_wakeup(wl);
+
+ /* the interrogate command got in, we can read the answer */
+ wl12xx_spi_mem_read(wl, wl->cmd_box_addr, answer,
+ CMDMBOX_HEADER_LEN + ie_len);
+
+ wl12xx_ps_elp_sleep(wl);
+
+ cmd = answer;
+ if (cmd->status != CMD_STATUS_SUCCESS)
+ wl12xx_error("INTERROGATE command error: %d",
+ cmd->status);
+
+ return 0;
+
+}
+
+int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len)
+{
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd configure");
+
+ ret = wl12xx_cmd_send(wl, CMD_CONFIGURE, ie,
+ ie_len);
+ if (ret < 0) {
+ wl12xx_warning("CONFIGURE command NOK");
+ return ret;
+ }
+
+ return 0;
+
+}
+
+int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
+ void *bitmap, u16 bitmap_len, u8 bitmap_control)
+{
+ struct vbm_update_request vbm;
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd vbm");
+
+ /* Count and period will be filled by the target */
+ vbm.tim.bitmap_ctrl = bitmap_control;
+ if (bitmap_len > PARTIAL_VBM_MAX) {
+ wl12xx_warning("cmd vbm len is %d B, truncating to %d",
+ bitmap_len, PARTIAL_VBM_MAX);
+ bitmap_len = PARTIAL_VBM_MAX;
+ }
+ memcpy(vbm.tim.pvb_field, bitmap, bitmap_len);
+ vbm.tim.identity = identity;
+ vbm.tim.length = bitmap_len + 3;
+
+ vbm.len = cpu_to_le16(bitmap_len + 5);
+
+ ret = wl12xx_cmd_send(wl, CMD_VBM, &vbm, sizeof(vbm));
+ if (ret < 0) {
+ wl12xx_error("VBM command failed");
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable)
+{
+ int ret;
+ u16 cmd_rx, cmd_tx;
+
+ wl12xx_debug(DEBUG_CMD, "cmd data path");
+
+ if (enable) {
+ cmd_rx = CMD_ENABLE_RX;
+ cmd_tx = CMD_ENABLE_TX;
+ } else {
+ cmd_rx = CMD_DISABLE_RX;
+ cmd_tx = CMD_DISABLE_TX;
+ }
+
+ ret = wl12xx_cmd_send(wl, cmd_rx, &channel, sizeof(channel));
+ if (ret < 0) {
+ wl12xx_error("rx %s cmd for channel %d failed",
+ enable ? "start" : "stop", channel);
+ return ret;
+ }
+
+ wl12xx_debug(DEBUG_BOOT, "rx %s cmd channel %d",
+ enable ? "start" : "stop", channel);
+
+ ret = wl12xx_cmd_send(wl, cmd_tx, &channel, sizeof(channel));
+ if (ret < 0) {
+ wl12xx_error("tx %s cmd for channel %d failed",
+ enable ? "start" : "stop", channel);
+ return ret;
+ }
+
+ wl12xx_debug(DEBUG_BOOT, "tx %s cmd channel %d",
+ enable ? "start" : "stop", channel);
+
+ return 0;
+}
+
+int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
+ u16 beacon_interval, u8 wait)
+{
+ unsigned long timeout;
+ struct cmd_join join = {};
+ int ret, i;
+ u8 *bssid;
+
+ /* FIXME: this should be in main.c */
+ ret = wl12xx_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE,
+ DEFAULT_HW_GEN_MODULATION_TYPE,
+ wl->tx_mgmt_frm_rate,
+ wl->tx_mgmt_frm_mod);
+ if (ret < 0)
+ return ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd join");
+
+ /* Reverse order BSSID */
+ bssid = (u8 *)&join.bssid_lsb;
+ for (i = 0; i < ETH_ALEN; i++)
+ bssid[i] = wl->bssid[ETH_ALEN - i - 1];
+
+ join.rx_config_options = wl->rx_config;
+ join.rx_filter_options = wl->rx_filter;
+
+ join.basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
+ RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+
+ join.beacon_interval = beacon_interval;
+ join.dtim_interval = dtim_interval;
+ join.bss_type = bss_type;
+ join.channel = wl->channel;
+ join.ctrl = JOIN_CMD_CTRL_TX_FLUSH;
+
+ ret = wl12xx_cmd_send(wl, CMD_START_JOIN, &join, sizeof(join));
+ if (ret < 0) {
+ wl12xx_error("failed to initiate cmd join");
+ return ret;
+ }
+
+ timeout = msecs_to_jiffies(JOIN_TIMEOUT);
+
+ /*
+ * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
+ * simplify locking we just sleep instead, for now
+ */
+ if (wait)
+ msleep(10);
+
+ return 0;
+}
+
+int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode)
+{
+ int ret;
+ struct acx_ps_params ps_params;
+
+ /* FIXME: this should be in ps.c */
+ ret = wl12xx_acx_wake_up_conditions(wl, wl->listen_int);
+ if (ret < 0) {
+ wl12xx_error("Couldnt set wake up conditions");
+ return ret;
+ }
+
+ wl12xx_debug(DEBUG_CMD, "cmd set ps mode");
+
+ ps_params.ps_mode = ps_mode;
+ ps_params.send_null_data = 1;
+ ps_params.retries = 5;
+ ps_params.hang_over_period = 128;
+ ps_params.null_data_rate = 1; /* 1 Mbps */
+
+ ret = wl12xx_cmd_send(wl, CMD_SET_PS_MODE, &ps_params,
+ sizeof(ps_params));
+ if (ret < 0) {
+ wl12xx_error("cmd set_ps_mode failed");
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer)
+{
+ struct cmd_read_write_memory mem_cmd, *mem_answer;
+ struct wl12xx_command cmd;
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd read memory");
+
+ memset(&mem_cmd, 0, sizeof(mem_cmd));
+ mem_cmd.addr = addr;
+ mem_cmd.size = len;
+
+ ret = wl12xx_cmd_send(wl, CMD_READ_MEMORY, &mem_cmd, sizeof(mem_cmd));
+ if (ret < 0) {
+ wl12xx_error("read memory command failed: %d", ret);
+ return ret;
+ }
+
+ /* the read command got in, we can now read the answer */
+ wl12xx_spi_mem_read(wl, wl->cmd_box_addr, &cmd,
+ CMDMBOX_HEADER_LEN + sizeof(mem_cmd));
+
+ if (cmd.status != CMD_STATUS_SUCCESS)
+ wl12xx_error("error in read command result: %d", cmd.status);
+
+ mem_answer = (struct cmd_read_write_memory *) cmd.parameters;
+ memcpy(answer, mem_answer->value, len);
+
+ return 0;
+}
+
+int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
+ void *buf, size_t buf_len)
+{
+ struct wl12xx_cmd_packet_template template;
+ int ret;
+
+ wl12xx_debug(DEBUG_CMD, "cmd template %d", cmd_id);
+
+ memset(&template, 0, sizeof(template));
+
+ WARN_ON(buf_len > WL12XX_MAX_TEMPLATE_SIZE);
+ buf_len = min_t(size_t, buf_len, WL12XX_MAX_TEMPLATE_SIZE);
+ template.size = cpu_to_le16(buf_len);
+
+ if (buf)
+ memcpy(template.template, buf, buf_len);
+
+ ret = wl12xx_cmd_send(wl, cmd_id, &template,
+ sizeof(template.size) + buf_len);
+ if (ret < 0) {
+ wl12xx_warning("cmd set_template failed: %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/cmd.h b/drivers/net/wireless/wl12xx/cmd.h
new file mode 100644
index 00000000000..aa307dcd081
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/cmd.h
@@ -0,0 +1,265 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_CMD_H__
+#define __WL12XX_CMD_H__
+
+#include "wl12xx.h"
+
+int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len);
+int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer);
+int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len,
+ void *answer);
+int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len);
+int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity,
+ void *bitmap, u16 bitmap_len, u8 bitmap_control);
+int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable);
+int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval,
+ u16 beacon_interval, u8 wait);
+int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode);
+int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer);
+int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id,
+ void *buf, size_t buf_len);
+
+/* unit ms */
+#define WL12XX_COMMAND_TIMEOUT 2000
+
+#define WL12XX_MAX_TEMPLATE_SIZE 300
+
+struct wl12xx_cmd_packet_template {
+ __le16 size;
+ u8 template[WL12XX_MAX_TEMPLATE_SIZE];
+} __attribute__ ((packed));
+
+enum wl12xx_commands {
+ CMD_RESET = 0,
+ CMD_INTERROGATE = 1, /*use this to read information elements*/
+ CMD_CONFIGURE = 2, /*use this to write information elements*/
+ CMD_ENABLE_RX = 3,
+ CMD_ENABLE_TX = 4,
+ CMD_DISABLE_RX = 5,
+ CMD_DISABLE_TX = 6,
+ CMD_SCAN = 8,
+ CMD_STOP_SCAN = 9,
+ CMD_VBM = 10,
+ CMD_START_JOIN = 11,
+ CMD_SET_KEYS = 12,
+ CMD_READ_MEMORY = 13,
+ CMD_WRITE_MEMORY = 14,
+ CMD_BEACON = 19,
+ CMD_PROBE_RESP = 20,
+ CMD_NULL_DATA = 21,
+ CMD_PROBE_REQ = 22,
+ CMD_TEST = 23,
+ CMD_RADIO_CALIBRATE = 25, /* OBSOLETE */
+ CMD_ENABLE_RX_PATH = 27, /* OBSOLETE */
+ CMD_NOISE_HIST = 28,
+ CMD_RX_RESET = 29,
+ CMD_PS_POLL = 30,
+ CMD_QOS_NULL_DATA = 31,
+ CMD_LNA_CONTROL = 32,
+ CMD_SET_BCN_MODE = 33,
+ CMD_MEASUREMENT = 34,
+ CMD_STOP_MEASUREMENT = 35,
+ CMD_DISCONNECT = 36,
+ CMD_SET_PS_MODE = 37,
+ CMD_CHANNEL_SWITCH = 38,
+ CMD_STOP_CHANNEL_SWICTH = 39,
+ CMD_AP_DISCOVERY = 40,
+ CMD_STOP_AP_DISCOVERY = 41,
+ CMD_SPS_SCAN = 42,
+ CMD_STOP_SPS_SCAN = 43,
+ CMD_HEALTH_CHECK = 45,
+ CMD_DEBUG = 46,
+ CMD_TRIGGER_SCAN_TO = 47,
+
+ NUM_COMMANDS,
+ MAX_COMMAND_ID = 0xFFFF,
+};
+
+#define MAX_CMD_PARAMS 572
+
+struct wl12xx_command {
+ u16 id;
+ u16 status;
+ u8 parameters[MAX_CMD_PARAMS];
+};
+
+enum {
+ CMD_MAILBOX_IDLE = 0,
+ CMD_STATUS_SUCCESS = 1,
+ CMD_STATUS_UNKNOWN_CMD = 2,
+ CMD_STATUS_UNKNOWN_IE = 3,
+ CMD_STATUS_REJECT_MEAS_SG_ACTIVE = 11,
+ CMD_STATUS_RX_BUSY = 13,
+ CMD_STATUS_INVALID_PARAM = 14,
+ CMD_STATUS_TEMPLATE_TOO_LARGE = 15,
+ CMD_STATUS_OUT_OF_MEMORY = 16,
+ CMD_STATUS_STA_TABLE_FULL = 17,
+ CMD_STATUS_RADIO_ERROR = 18,
+ CMD_STATUS_WRONG_NESTING = 19,
+ CMD_STATUS_TIMEOUT = 21, /* Driver internal use.*/
+ CMD_STATUS_FW_RESET = 22, /* Driver internal use.*/
+ MAX_COMMAND_STATUS = 0xff
+};
+
+
+/*
+ * CMD_READ_MEMORY
+ *
+ * The host issues this command to read the WiLink device memory/registers.
+ *
+ * Note: The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+/*
+ * CMD_WRITE_MEMORY
+ *
+ * The host issues this command to write the WiLink device memory/registers.
+ *
+ * The Base Band address has special handling (16 bits registers and
+ * addresses). For more information, see the hardware specification.
+ */
+#define MAX_READ_SIZE 256
+
+struct cmd_read_write_memory {
+ /* The address of the memory to read from or write to.*/
+ u32 addr;
+
+ /* The amount of data in bytes to read from or write to the WiLink
+ * device.*/
+ u32 size;
+
+ /* The actual value read from or written to the Wilink. The source
+ of this field is the Host in WRITE command or the Wilink in READ
+ command. */
+ u8 value[MAX_READ_SIZE];
+};
+
+#define CMDMBOX_HEADER_LEN 4
+#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
+
+
+struct basic_scan_parameters {
+ u32 rx_config_options;
+ u32 rx_filter_options;
+
+ /*
+ * Scan options:
+ * bit 0: When this bit is set, passive scan.
+ * bit 1: Band, when this bit is set we scan
+ * in the 5Ghz band.
+ * bit 2: voice mode, 0 for normal scan.
+ * bit 3: scan priority, 1 for high priority.
+ */
+ u16 scan_options;
+
+ /* Number of channels to scan */
+ u8 num_channels;
+
+ /* Number opf probe requests to send, per channel */
+ u8 num_probe_requests;
+
+ /* Rate and modulation for probe requests */
+ u16 tx_rate;
+
+ u8 tid_trigger;
+ u8 ssid_len;
+ u32 ssid[8];
+
+} __attribute__ ((packed));
+
+struct basic_scan_channel_parameters {
+ u32 min_duration; /* in TU */
+ u32 max_duration; /* in TU */
+ u32 bssid_lsb;
+ u16 bssid_msb;
+
+ /*
+ * bits 0-3: Early termination count.
+ * bits 4-5: Early termination condition.
+ */
+ u8 early_termination;
+
+ u8 tx_power_att;
+ u8 channel;
+ u8 pad[3];
+} __attribute__ ((packed));
+
+/* SCAN parameters */
+#define SCAN_MAX_NUM_OF_CHANNELS 16
+
+struct cmd_scan {
+ struct basic_scan_parameters params;
+ struct basic_scan_channel_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
+} __attribute__ ((packed));
+
+enum {
+ BSS_TYPE_IBSS = 0,
+ BSS_TYPE_STA_BSS = 2,
+ BSS_TYPE_AP_BSS = 3,
+ MAX_BSS_TYPE = 0xFF
+};
+
+#define JOIN_CMD_CTRL_TX_FLUSH 0x80 /* Firmware flushes all Tx */
+#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE 0x01 /* Early wakeup time */
+
+
+struct cmd_join {
+ u32 bssid_lsb;
+ u16 bssid_msb;
+ u16 beacon_interval; /* in TBTTs */
+ u32 rx_config_options;
+ u32 rx_filter_options;
+
+ /*
+ * The target uses this field to determine the rate at
+ * which to transmit control frame responses (such as
+ * ACK or CTS frames).
+ */
+ u16 basic_rate_set;
+ u8 dtim_interval;
+ u8 tx_ctrl_frame_rate; /* OBSOLETE */
+ u8 tx_ctrl_frame_mod; /* OBSOLETE */
+ /*
+ * bits 0-2: This bitwise field specifies the type
+ * of BSS to start or join (BSS_TYPE_*).
+ * bit 4: Band - The radio band in which to join
+ * or start.
+ * 0 - 2.4GHz band
+ * 1 - 5GHz band
+ * bits 3, 5-7: Reserved
+ */
+ u8 bss_type;
+ u8 channel;
+ u8 ssid_len;
+ u8 ssid[IW_ESSID_MAX_SIZE];
+ u8 ctrl; /* JOIN_CMD_CTRL_* */
+ u8 tx_mgt_frame_rate; /* OBSOLETE */
+ u8 tx_mgt_frame_mod; /* OBSOLETE */
+ u8 reserved;
+} __attribute__ ((packed));
+
+
+#endif /* __WL12XX_CMD_H__ */
diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
new file mode 100644
index 00000000000..cdb368ce4da
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -0,0 +1,508 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "debugfs.h"
+
+#include <linux/skbuff.h>
+
+#include "wl12xx.h"
+#include "acx.h"
+
+/* ms */
+#define WL12XX_DEBUGFS_STATS_LIFETIME 1000
+
+/* debugfs macros idea from mac80211 */
+
+#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...) \
+static ssize_t name## _read(struct file *file, char __user *userbuf, \
+ size_t count, loff_t *ppos) \
+{ \
+ struct wl12xx *wl = file->private_data; \
+ char buf[buflen]; \
+ int res; \
+ \
+ res = scnprintf(buf, buflen, fmt "\n", ##value); \
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res); \
+} \
+ \
+static const struct file_operations name## _ops = { \
+ .read = name## _read, \
+ .open = wl12xx_open_file_generic, \
+};
+
+#define DEBUGFS_ADD(name, parent) \
+ wl->debugfs.name = debugfs_create_file(#name, 0400, parent, \
+ wl, &name## _ops); \
+ if (IS_ERR(wl->debugfs.name)) { \
+ ret = PTR_ERR(wl->debugfs.name); \
+ wl->debugfs.name = NULL; \
+ goto out; \
+ }
+
+#define DEBUGFS_DEL(name) \
+ do { \
+ debugfs_remove(wl->debugfs.name); \
+ wl->debugfs.name = NULL; \
+ } while (0)
+
+#define DEBUGFS_FWSTATS_FILE(sub, name, buflen, fmt) \
+static ssize_t sub## _ ##name## _read(struct file *file, \
+ char __user *userbuf, \
+ size_t count, loff_t *ppos) \
+{ \
+ struct wl12xx *wl = file->private_data; \
+ char buf[buflen]; \
+ int res; \
+ \
+ wl12xx_debugfs_update_stats(wl); \
+ \
+ res = scnprintf(buf, buflen, fmt "\n", \
+ wl->stats.fw_stats->sub.name); \
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res); \
+} \
+ \
+static const struct file_operations sub## _ ##name## _ops = { \
+ .read = sub## _ ##name## _read, \
+ .open = wl12xx_open_file_generic, \
+};
+
+#define DEBUGFS_FWSTATS_ADD(sub, name) \
+ DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics)
+
+#define DEBUGFS_FWSTATS_DEL(sub, name) \
+ DEBUGFS_DEL(sub## _ ##name)
+
+static void wl12xx_debugfs_update_stats(struct wl12xx *wl)
+{
+ mutex_lock(&wl->mutex);
+
+ if (wl->state == WL12XX_STATE_ON &&
+ time_after(jiffies, wl->stats.fw_stats_update +
+ msecs_to_jiffies(WL12XX_DEBUGFS_STATS_LIFETIME))) {
+ wl12xx_acx_statistics(wl, wl->stats.fw_stats);
+ wl->stats.fw_stats_update = jiffies;
+ }
+
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl12xx_open_file_generic(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rx, out_of_mem, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hw_stuck, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, dropped, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, fcs_err, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, path_reset, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rx, reset_counter, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(dma, rx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, rx_errors, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_requested, 20, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_errors, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, fiqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_headers, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_rdys, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, irqs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, decrypt_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma0_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma1_done, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, commands, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_procs, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, pci_pm, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, wakeups, 20, "%u");
+DEBUGFS_FWSTATS_FILE(isr, low_rssi, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(wep, addr_key_count, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, default_key_count, 20, "%u");
+/* skipping wep.reserved */
+DEBUGFS_FWSTATS_FILE(wep, key_not_found, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(wep, interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(pwr, ps_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, elp_enter, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, power_save_off, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, enable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, disable_ps, 20, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, 20, "%u");
+/* skipping cont_miss_bcns_spread for now */
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(mic, rx_pkts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(mic, calc_failure, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, 20, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(event, heart_beat, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, calibration, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mismatch, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_pool, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, oom_late, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, 20, "%u");
+DEBUGFS_FWSTATS_FILE(event, tx_stuck, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, 20, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, 20, "%u");
+
+DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data,
+ 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, 20, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, 20, "%u");
+
+DEBUGFS_READONLY_FILE(retry_count, 20, "%u", wl->stats.retry_count);
+DEBUGFS_READONLY_FILE(excessive_retries, 20, "%u",
+ wl->stats.excessive_retries);
+
+static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct wl12xx *wl = file->private_data;
+ u32 queue_len;
+ char buf[20];
+ int res;
+
+ queue_len = skb_queue_len(&wl->tx_queue);
+
+ res = scnprintf(buf, sizeof(buf), "%u\n", queue_len);
+ return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+
+static const struct file_operations tx_queue_len_ops = {
+ .read = tx_queue_len_read,
+ .open = wl12xx_open_file_generic,
+};
+
+static void wl12xx_debugfs_delete_files(struct wl12xx *wl)
+{
+ DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
+
+ DEBUGFS_FWSTATS_DEL(rx, out_of_mem);
+ DEBUGFS_FWSTATS_DEL(rx, hdr_overflow);
+ DEBUGFS_FWSTATS_DEL(rx, hw_stuck);
+ DEBUGFS_FWSTATS_DEL(rx, dropped);
+ DEBUGFS_FWSTATS_DEL(rx, fcs_err);
+ DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig);
+ DEBUGFS_FWSTATS_DEL(rx, path_reset);
+ DEBUGFS_FWSTATS_DEL(rx, reset_counter);
+
+ DEBUGFS_FWSTATS_DEL(dma, rx_requested);
+ DEBUGFS_FWSTATS_DEL(dma, rx_errors);
+ DEBUGFS_FWSTATS_DEL(dma, tx_requested);
+ DEBUGFS_FWSTATS_DEL(dma, tx_errors);
+
+ DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt);
+ DEBUGFS_FWSTATS_DEL(isr, fiqs);
+ DEBUGFS_FWSTATS_DEL(isr, rx_headers);
+ DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow);
+ DEBUGFS_FWSTATS_DEL(isr, rx_rdys);
+ DEBUGFS_FWSTATS_DEL(isr, irqs);
+ DEBUGFS_FWSTATS_DEL(isr, tx_procs);
+ DEBUGFS_FWSTATS_DEL(isr, decrypt_done);
+ DEBUGFS_FWSTATS_DEL(isr, dma0_done);
+ DEBUGFS_FWSTATS_DEL(isr, dma1_done);
+ DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete);
+ DEBUGFS_FWSTATS_DEL(isr, commands);
+ DEBUGFS_FWSTATS_DEL(isr, rx_procs);
+ DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes);
+ DEBUGFS_FWSTATS_DEL(isr, host_acknowledges);
+ DEBUGFS_FWSTATS_DEL(isr, pci_pm);
+ DEBUGFS_FWSTATS_DEL(isr, wakeups);
+ DEBUGFS_FWSTATS_DEL(isr, low_rssi);
+
+ DEBUGFS_FWSTATS_DEL(wep, addr_key_count);
+ DEBUGFS_FWSTATS_DEL(wep, default_key_count);
+ /* skipping wep.reserved */
+ DEBUGFS_FWSTATS_DEL(wep, key_not_found);
+ DEBUGFS_FWSTATS_DEL(wep, decrypt_fail);
+ DEBUGFS_FWSTATS_DEL(wep, packets);
+ DEBUGFS_FWSTATS_DEL(wep, interrupt);
+
+ DEBUGFS_FWSTATS_DEL(pwr, ps_enter);
+ DEBUGFS_FWSTATS_DEL(pwr, elp_enter);
+ DEBUGFS_FWSTATS_DEL(pwr, missing_bcns);
+ DEBUGFS_FWSTATS_DEL(pwr, wake_on_host);
+ DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp);
+ DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons);
+ DEBUGFS_FWSTATS_DEL(pwr, power_save_off);
+ DEBUGFS_FWSTATS_DEL(pwr, enable_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, disable_ps);
+ DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps);
+ /* skipping cont_miss_bcns_spread for now */
+ DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons);
+
+ DEBUGFS_FWSTATS_DEL(mic, rx_pkts);
+ DEBUGFS_FWSTATS_DEL(mic, calc_failure);
+
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_fail);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_fail);
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_packets);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_packets);
+ DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt);
+ DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt);
+
+ DEBUGFS_FWSTATS_DEL(event, heart_beat);
+ DEBUGFS_FWSTATS_DEL(event, calibration);
+ DEBUGFS_FWSTATS_DEL(event, rx_mismatch);
+ DEBUGFS_FWSTATS_DEL(event, rx_mem_empty);
+ DEBUGFS_FWSTATS_DEL(event, rx_pool);
+ DEBUGFS_FWSTATS_DEL(event, oom_late);
+ DEBUGFS_FWSTATS_DEL(event, phy_transmit_error);
+ DEBUGFS_FWSTATS_DEL(event, tx_stuck);
+
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn);
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn);
+ DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization);
+ DEBUGFS_FWSTATS_DEL(ps, upsd_utilization);
+
+ DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop);
+ DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+ DEBUGFS_DEL(tx_queue_len);
+ DEBUGFS_DEL(retry_count);
+ DEBUGFS_DEL(excessive_retries);
+}
+
+static int wl12xx_debugfs_add_files(struct wl12xx *wl)
+{
+ int ret = 0;
+
+ DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow);
+
+ DEBUGFS_FWSTATS_ADD(rx, out_of_mem);
+ DEBUGFS_FWSTATS_ADD(rx, hdr_overflow);
+ DEBUGFS_FWSTATS_ADD(rx, hw_stuck);
+ DEBUGFS_FWSTATS_ADD(rx, dropped);
+ DEBUGFS_FWSTATS_ADD(rx, fcs_err);
+ DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig);
+ DEBUGFS_FWSTATS_ADD(rx, path_reset);
+ DEBUGFS_FWSTATS_ADD(rx, reset_counter);
+
+ DEBUGFS_FWSTATS_ADD(dma, rx_requested);
+ DEBUGFS_FWSTATS_ADD(dma, rx_errors);
+ DEBUGFS_FWSTATS_ADD(dma, tx_requested);
+ DEBUGFS_FWSTATS_ADD(dma, tx_errors);
+
+ DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt);
+ DEBUGFS_FWSTATS_ADD(isr, fiqs);
+ DEBUGFS_FWSTATS_ADD(isr, rx_headers);
+ DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow);
+ DEBUGFS_FWSTATS_ADD(isr, rx_rdys);
+ DEBUGFS_FWSTATS_ADD(isr, irqs);
+ DEBUGFS_FWSTATS_ADD(isr, tx_procs);
+ DEBUGFS_FWSTATS_ADD(isr, decrypt_done);
+ DEBUGFS_FWSTATS_ADD(isr, dma0_done);
+ DEBUGFS_FWSTATS_ADD(isr, dma1_done);
+ DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete);
+ DEBUGFS_FWSTATS_ADD(isr, commands);
+ DEBUGFS_FWSTATS_ADD(isr, rx_procs);
+ DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes);
+ DEBUGFS_FWSTATS_ADD(isr, host_acknowledges);
+ DEBUGFS_FWSTATS_ADD(isr, pci_pm);
+ DEBUGFS_FWSTATS_ADD(isr, wakeups);
+ DEBUGFS_FWSTATS_ADD(isr, low_rssi);
+
+ DEBUGFS_FWSTATS_ADD(wep, addr_key_count);
+ DEBUGFS_FWSTATS_ADD(wep, default_key_count);
+ /* skipping wep.reserved */
+ DEBUGFS_FWSTATS_ADD(wep, key_not_found);
+ DEBUGFS_FWSTATS_ADD(wep, decrypt_fail);
+ DEBUGFS_FWSTATS_ADD(wep, packets);
+ DEBUGFS_FWSTATS_ADD(wep, interrupt);
+
+ DEBUGFS_FWSTATS_ADD(pwr, ps_enter);
+ DEBUGFS_FWSTATS_ADD(pwr, elp_enter);
+ DEBUGFS_FWSTATS_ADD(pwr, missing_bcns);
+ DEBUGFS_FWSTATS_ADD(pwr, wake_on_host);
+ DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp);
+ DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons);
+ DEBUGFS_FWSTATS_ADD(pwr, power_save_off);
+ DEBUGFS_FWSTATS_ADD(pwr, enable_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, disable_ps);
+ DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps);
+ /* skipping cont_miss_bcns_spread for now */
+ DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons);
+
+ DEBUGFS_FWSTATS_ADD(mic, rx_pkts);
+ DEBUGFS_FWSTATS_ADD(mic, calc_failure);
+
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_fail);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_fail);
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_packets);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_packets);
+ DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt);
+ DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt);
+
+ DEBUGFS_FWSTATS_ADD(event, heart_beat);
+ DEBUGFS_FWSTATS_ADD(event, calibration);
+ DEBUGFS_FWSTATS_ADD(event, rx_mismatch);
+ DEBUGFS_FWSTATS_ADD(event, rx_mem_empty);
+ DEBUGFS_FWSTATS_ADD(event, rx_pool);
+ DEBUGFS_FWSTATS_ADD(event, oom_late);
+ DEBUGFS_FWSTATS_ADD(event, phy_transmit_error);
+ DEBUGFS_FWSTATS_ADD(event, tx_stuck);
+
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn);
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn);
+ DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization);
+ DEBUGFS_FWSTATS_ADD(ps, upsd_utilization);
+
+ DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop);
+ DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data);
+ DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+ DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir);
+ DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
+ DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
+
+out:
+ if (ret < 0)
+ wl12xx_debugfs_delete_files(wl);
+
+ return ret;
+}
+
+void wl12xx_debugfs_reset(struct wl12xx *wl)
+{
+ memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
+ wl->stats.retry_count = 0;
+ wl->stats.excessive_retries = 0;
+}
+
+int wl12xx_debugfs_init(struct wl12xx *wl)
+{
+ int ret;
+
+ wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+
+ if (IS_ERR(wl->debugfs.rootdir)) {
+ ret = PTR_ERR(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+ goto err;
+ }
+
+ wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics",
+ wl->debugfs.rootdir);
+
+ if (IS_ERR(wl->debugfs.fw_statistics)) {
+ ret = PTR_ERR(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+ goto err_root;
+ }
+
+ wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats),
+ GFP_KERNEL);
+
+ if (!wl->stats.fw_stats) {
+ ret = -ENOMEM;
+ goto err_fw;
+ }
+
+ wl->stats.fw_stats_update = jiffies;
+
+ ret = wl12xx_debugfs_add_files(wl);
+
+ if (ret < 0)
+ goto err_file;
+
+ return 0;
+
+err_file:
+ kfree(wl->stats.fw_stats);
+ wl->stats.fw_stats = NULL;
+
+err_fw:
+ debugfs_remove(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+
+err_root:
+ debugfs_remove(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+
+err:
+ return ret;
+}
+
+void wl12xx_debugfs_exit(struct wl12xx *wl)
+{
+ wl12xx_debugfs_delete_files(wl);
+
+ kfree(wl->stats.fw_stats);
+ wl->stats.fw_stats = NULL;
+
+ debugfs_remove(wl->debugfs.fw_statistics);
+ wl->debugfs.fw_statistics = NULL;
+
+ debugfs_remove(wl->debugfs.rootdir);
+ wl->debugfs.rootdir = NULL;
+
+}
diff --git a/drivers/net/wireless/wl12xx/debugfs.h b/drivers/net/wireless/wl12xx/debugfs.h
new file mode 100644
index 00000000000..562cdcbcc87
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/debugfs.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef WL12XX_DEBUGFS_H
+#define WL12XX_DEBUGFS_H
+
+#include "wl12xx.h"
+
+int wl12xx_debugfs_init(struct wl12xx *wl);
+void wl12xx_debugfs_exit(struct wl12xx *wl);
+void wl12xx_debugfs_reset(struct wl12xx *wl);
+
+#endif /* WL12XX_DEBUGFS_H */
diff --git a/drivers/net/wireless/wl12xx/event.c b/drivers/net/wireless/wl12xx/event.c
new file mode 100644
index 00000000000..99529ca89a7
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -0,0 +1,127 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "event.h"
+#include "ps.h"
+
+static int wl12xx_event_scan_complete(struct wl12xx *wl,
+ struct event_mailbox *mbox)
+{
+ wl12xx_debug(DEBUG_EVENT, "status: 0x%x, channels: %d",
+ mbox->scheduled_scan_status,
+ mbox->scheduled_scan_channels);
+
+ if (wl->scanning) {
+ mutex_unlock(&wl->mutex);
+ ieee80211_scan_completed(wl->hw, false);
+ mutex_lock(&wl->mutex);
+ wl->scanning = false;
+ }
+
+ return 0;
+}
+
+static void wl12xx_event_mbox_dump(struct event_mailbox *mbox)
+{
+ wl12xx_debug(DEBUG_EVENT, "MBOX DUMP:");
+ wl12xx_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector);
+ wl12xx_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
+}
+
+static int wl12xx_event_process(struct wl12xx *wl, struct event_mailbox *mbox)
+{
+ int ret;
+ u32 vector;
+
+ wl12xx_event_mbox_dump(mbox);
+
+ vector = mbox->events_vector & ~(mbox->events_mask);
+ wl12xx_debug(DEBUG_EVENT, "vector: 0x%x", vector);
+
+ if (vector & SCAN_COMPLETE_EVENT_ID) {
+ ret = wl12xx_event_scan_complete(wl, mbox);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (vector & BSS_LOSE_EVENT_ID) {
+ wl12xx_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
+
+ if (wl->psm_requested && wl->psm) {
+ ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+int wl12xx_event_unmask(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_event_mbox_mask(wl, ~(wl->event_mask));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+void wl12xx_event_mbox_config(struct wl12xx *wl)
+{
+ wl->mbox_ptr[0] = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+ wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
+
+ wl12xx_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
+ wl->mbox_ptr[0], wl->mbox_ptr[1]);
+}
+
+int wl12xx_event_handle(struct wl12xx *wl, u8 mbox_num)
+{
+ struct event_mailbox mbox;
+ int ret;
+
+ wl12xx_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
+
+ if (mbox_num > 1)
+ return -EINVAL;
+
+ /* first we read the mbox descriptor */
+ wl12xx_spi_mem_read(wl, wl->mbox_ptr[mbox_num], &mbox,
+ sizeof(struct event_mailbox));
+
+ /* process the descriptor */
+ ret = wl12xx_event_process(wl, &mbox);
+ if (ret < 0)
+ return ret;
+
+ /* then we let the firmware know it can go on...*/
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+
+ return 0;
+}
diff --git a/drivers/net/wireless/wl12xx/event.h b/drivers/net/wireless/wl12xx/event.h
new file mode 100644
index 00000000000..1f4c2f7438a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/event.h
@@ -0,0 +1,121 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_EVENT_H__
+#define __WL12XX_EVENT_H__
+
+/*
+ * Mbox events
+ *
+ * The event mechanism is based on a pair of event buffers (buffers A and
+ * B) at fixed locations in the target's memory. The host processes one
+ * buffer while the other buffer continues to collect events. If the host
+ * is not processing events, an interrupt is issued to signal that a buffer
+ * is ready. Once the host is done with processing events from one buffer,
+ * it signals the target (with an ACK interrupt) that the event buffer is
+ * free.
+ */
+
+enum {
+ RESERVED1_EVENT_ID = BIT(0),
+ RESERVED2_EVENT_ID = BIT(1),
+ MEASUREMENT_START_EVENT_ID = BIT(2),
+ SCAN_COMPLETE_EVENT_ID = BIT(3),
+ CALIBRATION_COMPLETE_EVENT_ID = BIT(4),
+ ROAMING_TRIGGER_LOW_RSSI_EVENT_ID = BIT(5),
+ PS_REPORT_EVENT_ID = BIT(6),
+ SYNCHRONIZATION_TIMEOUT_EVENT_ID = BIT(7),
+ HEALTH_REPORT_EVENT_ID = BIT(8),
+ ACI_DETECTION_EVENT_ID = BIT(9),
+ DEBUG_REPORT_EVENT_ID = BIT(10),
+ MAC_STATUS_EVENT_ID = BIT(11),
+ DISCONNECT_EVENT_COMPLETE_ID = BIT(12),
+ JOIN_EVENT_COMPLETE_ID = BIT(13),
+ CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(14),
+ BSS_LOSE_EVENT_ID = BIT(15),
+ ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(16),
+ MEASUREMENT_COMPLETE_EVENT_ID = BIT(17),
+ AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(18),
+ SCHEDULED_SCAN_COMPLETE_EVENT_ID = BIT(19),
+ PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(20),
+ RESET_BSS_EVENT_ID = BIT(21),
+ REGAINED_BSS_EVENT_ID = BIT(22),
+ ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID = BIT(23),
+ ROAMING_TRIGGER_LOW_SNR_EVENT_ID = BIT(24),
+ ROAMING_TRIGGER_REGAINED_SNR_EVENT_ID = BIT(25),
+
+ DBG_EVENT_ID = BIT(26),
+ BT_PTA_SENSE_EVENT_ID = BIT(27),
+ BT_PTA_PREDICTION_EVENT_ID = BIT(28),
+ BT_PTA_AVALANCHE_EVENT_ID = BIT(29),
+
+ PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(30),
+
+ EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff,
+};
+
+struct event_debug_report {
+ u8 debug_event_id;
+ u8 num_params;
+ u16 pad;
+ u32 report_1;
+ u32 report_2;
+ u32 report_3;
+} __attribute__ ((packed));
+
+struct event_mailbox {
+ u32 events_vector;
+ u32 events_mask;
+ u32 reserved_1;
+ u32 reserved_2;
+
+ char average_rssi_level;
+ u8 ps_status;
+ u8 channel_switch_status;
+ u8 scheduled_scan_status;
+
+ /* Channels scanned by the scheduled scan */
+ u16 scheduled_scan_channels;
+
+ /* If bit 0 is set -> target's fatal error */
+ u16 health_report;
+ u16 bad_fft_counter;
+ u8 bt_pta_sense_info;
+ u8 bt_pta_protective_info;
+ u32 reserved;
+ u32 debug_report[2];
+
+ /* Number of FCS errors since last event */
+ u32 fcs_err_counter;
+
+ struct event_debug_report report;
+ u8 average_snr_level;
+ u8 padding[19];
+} __attribute__ ((packed));
+
+int wl12xx_event_unmask(struct wl12xx *wl);
+void wl12xx_event_mbox_config(struct wl12xx *wl);
+int wl12xx_event_handle(struct wl12xx *wl, u8 mbox);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/init.c b/drivers/net/wireless/wl12xx/init.c
new file mode 100644
index 00000000000..2a573a6010b
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -0,0 +1,200 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "init.h"
+#include "wl12xx_80211.h"
+#include "acx.h"
+#include "cmd.h"
+
+int wl12xx_hw_init_hwenc_config(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_feature_cfg(wl);
+ if (ret < 0) {
+ wl12xx_warning("couldn't set feature config");
+ return ret;
+ }
+
+ ret = wl12xx_acx_default_key(wl, wl->default_key);
+ if (ret < 0) {
+ wl12xx_warning("couldn't set default key");
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_hw_init_templates_config(struct wl12xx *wl)
+{
+ int ret;
+ u8 partial_vbm[PARTIAL_VBM_MAX];
+
+ /* send empty templates for fw memory reservation */
+ ret = wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, NULL,
+ sizeof(struct wl12xx_probe_req_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_template_set(wl, CMD_NULL_DATA, NULL,
+ sizeof(struct wl12xx_null_data_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_template_set(wl, CMD_PS_POLL, NULL,
+ sizeof(struct wl12xx_ps_poll_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_template_set(wl, CMD_QOS_NULL_DATA, NULL,
+ sizeof
+ (struct wl12xx_qos_null_data_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, NULL,
+ sizeof
+ (struct wl12xx_probe_resp_template));
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_template_set(wl, CMD_BEACON, NULL,
+ sizeof
+ (struct wl12xx_beacon_template));
+ if (ret < 0)
+ return ret;
+
+ /* tim templates, first reserve space then allocate an empty one */
+ memset(partial_vbm, 0, PARTIAL_VBM_MAX);
+ ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, PARTIAL_VBM_MAX, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_vbm(wl, TIM_ELE_ID, partial_vbm, 1, 0);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter)
+{
+ int ret;
+
+ ret = wl12xx_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_rx_config(wl, config, filter);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_phy_config(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_pd_threshold(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_slot(wl, DEFAULT_SLOT_TIME);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_group_address_tbl(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_service_period_timeout(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_rts_threshold(wl, RTS_THRESHOLD_DEF);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_beacon_filter(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_beacon_filter_opt(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_beacon_filter_table(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_pta(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_sg_enable(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_acx_sg_cfg(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_energy_detection(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_cca_threshold(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl12xx_acx_bcn_dtim_options(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_hw_init_power_auth(struct wl12xx *wl)
+{
+ return wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM);
+}
diff --git a/drivers/net/wireless/wl12xx/init.h b/drivers/net/wireless/wl12xx/init.h
new file mode 100644
index 00000000000..c8b6cd0b7c3
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/init.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_INIT_H__
+#define __WL12XX_INIT_H__
+
+#include "wl12xx.h"
+
+int wl12xx_hw_init_hwenc_config(struct wl12xx *wl);
+int wl12xx_hw_init_templates_config(struct wl12xx *wl);
+int wl12xx_hw_init_mem_config(struct wl12xx *wl);
+int wl12xx_hw_init_rx_config(struct wl12xx *wl, u32 config, u32 filter);
+int wl12xx_hw_init_phy_config(struct wl12xx *wl);
+int wl12xx_hw_init_beacon_filter(struct wl12xx *wl);
+int wl12xx_hw_init_pta(struct wl12xx *wl);
+int wl12xx_hw_init_energy_detection(struct wl12xx *wl);
+int wl12xx_hw_init_beacon_broadcast(struct wl12xx *wl);
+int wl12xx_hw_init_power_auth(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
new file mode 100644
index 00000000000..603d6114882
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -0,0 +1,1358 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/spi/wl12xx.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "wl1251.h"
+#include "spi.h"
+#include "event.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+#include "debugfs.h"
+
+static void wl12xx_disable_interrupts(struct wl12xx *wl)
+{
+ disable_irq(wl->irq);
+}
+
+static void wl12xx_power_off(struct wl12xx *wl)
+{
+ wl->set_power(false);
+}
+
+static void wl12xx_power_on(struct wl12xx *wl)
+{
+ wl->set_power(true);
+}
+
+static irqreturn_t wl12xx_irq(int irq, void *cookie)
+{
+ struct wl12xx *wl;
+
+ wl12xx_debug(DEBUG_IRQ, "IRQ");
+
+ wl = cookie;
+
+ schedule_work(&wl->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static int wl12xx_fetch_firmware(struct wl12xx *wl)
+{
+ const struct firmware *fw;
+ int ret;
+
+ ret = request_firmware(&fw, wl->chip.fw_filename, &wl->spi->dev);
+
+ if (ret < 0) {
+ wl12xx_error("could not get firmware: %d", ret);
+ return ret;
+ }
+
+ if (fw->size % 4) {
+ wl12xx_error("firmware size is not multiple of 32 bits: %zu",
+ fw->size);
+ ret = -EILSEQ;
+ goto out;
+ }
+
+ wl->fw_len = fw->size;
+ wl->fw = kmalloc(wl->fw_len, GFP_KERNEL);
+
+ if (!wl->fw) {
+ wl12xx_error("could not allocate memory for the firmware");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(wl->fw, fw->data, wl->fw_len);
+
+ ret = 0;
+
+out:
+ release_firmware(fw);
+
+ return ret;
+}
+
+static int wl12xx_fetch_nvs(struct wl12xx *wl)
+{
+ const struct firmware *fw;
+ int ret;
+
+ ret = request_firmware(&fw, wl->chip.nvs_filename, &wl->spi->dev);
+
+ if (ret < 0) {
+ wl12xx_error("could not get nvs file: %d", ret);
+ return ret;
+ }
+
+ if (fw->size % 4) {
+ wl12xx_error("nvs size is not multiple of 32 bits: %zu",
+ fw->size);
+ ret = -EILSEQ;
+ goto out;
+ }
+
+ wl->nvs_len = fw->size;
+ wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);
+
+ if (!wl->nvs) {
+ wl12xx_error("could not allocate memory for the nvs file");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memcpy(wl->nvs, fw->data, wl->nvs_len);
+
+ ret = 0;
+
+out:
+ release_firmware(fw);
+
+ return ret;
+}
+
+static void wl12xx_fw_wakeup(struct wl12xx *wl)
+{
+ u32 elp_reg;
+
+ elp_reg = ELPCTRL_WAKE_UP;
+ wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+ elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+ if (!(elp_reg & ELPCTRL_WLAN_READY)) {
+ wl12xx_warning("WLAN not ready");
+ elp_reg = ELPCTRL_WAKE_UP_WLAN_READY;
+ wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+ }
+}
+
+static int wl12xx_chip_wakeup(struct wl12xx *wl)
+{
+ int ret = 0;
+
+ wl12xx_power_on(wl);
+ msleep(wl->chip.power_on_sleep);
+ wl12xx_spi_reset(wl);
+ wl12xx_spi_init(wl);
+
+ /* We don't need a real memory partition here, because we only want
+ * to use the registers at this point. */
+ wl12xx_set_partition(wl,
+ 0x00000000,
+ 0x00000000,
+ REGISTERS_BASE,
+ REGISTERS_DOWN_SIZE);
+
+ /* ELP module wake up */
+ wl12xx_fw_wakeup(wl);
+
+ /* whal_FwCtrl_BootSm() */
+
+ /* 0. read chip id from CHIP_ID */
+ wl->chip.id = wl12xx_reg_read32(wl, CHIP_ID_B);
+
+ /* 1. check if chip id is valid */
+
+ switch (wl->chip.id) {
+ case CHIP_ID_1251_PG12:
+ wl12xx_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
+ wl->chip.id);
+
+ wl1251_setup(wl);
+
+ break;
+ case CHIP_ID_1271_PG10:
+ case CHIP_ID_1251_PG10:
+ case CHIP_ID_1251_PG11:
+ default:
+ wl12xx_error("unsupported chip id: 0x%x", wl->chip.id);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (wl->fw == NULL) {
+ ret = wl12xx_fetch_firmware(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+ /* No NVS from netlink, try to get it from the filesystem */
+ if (wl->nvs == NULL) {
+ ret = wl12xx_fetch_nvs(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void wl12xx_filter_work(struct work_struct *work)
+{
+ struct wl12xx *wl =
+ container_of(work, struct wl12xx, filter_work);
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ if (wl->state == WL12XX_STATE_OFF)
+ goto out;
+
+ ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+ if (ret < 0)
+ goto out;
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+int wl12xx_plt_start(struct wl12xx *wl)
+{
+ int ret;
+
+ wl12xx_notice("power up");
+
+ if (wl->state != WL12XX_STATE_OFF) {
+ wl12xx_error("cannot go into PLT state because not "
+ "in off state: %d", wl->state);
+ return -EBUSY;
+ }
+
+ wl->state = WL12XX_STATE_PLT;
+
+ ret = wl12xx_chip_wakeup(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl->chip.op_boot(wl);
+ if (ret < 0)
+ return ret;
+
+ wl12xx_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
+
+ ret = wl->chip.op_plt_init(wl);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int wl12xx_plt_stop(struct wl12xx *wl)
+{
+ wl12xx_notice("power down");
+
+ if (wl->state != WL12XX_STATE_PLT) {
+ wl12xx_error("cannot power down because not in PLT "
+ "state: %d", wl->state);
+ return -EBUSY;
+ }
+
+ wl12xx_disable_interrupts(wl);
+ wl12xx_power_off(wl);
+
+ wl->state = WL12XX_STATE_OFF;
+
+ return 0;
+}
+
+
+static int wl12xx_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct wl12xx *wl = hw->priv;
+
+ skb_queue_tail(&wl->tx_queue, skb);
+
+ schedule_work(&wl->tx_work);
+
+ /*
+ * The workqueue is slow to process the tx_queue and we need stop
+ * the queue here, otherwise the queue will get too long.
+ */
+ if (skb_queue_len(&wl->tx_queue) >= WL12XX_TX_QUEUE_MAX_LENGTH) {
+ ieee80211_stop_queues(wl->hw);
+
+ /*
+ * FIXME: this is racy, the variable is not properly
+ * protected. Maybe fix this by removing the stupid
+ * variable altogether and checking the real queue state?
+ */
+ wl->tx_queue_stopped = true;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+static int wl12xx_op_start(struct ieee80211_hw *hw)
+{
+ struct wl12xx *wl = hw->priv;
+ int ret = 0;
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 start");
+
+ mutex_lock(&wl->mutex);
+
+ if (wl->state != WL12XX_STATE_OFF) {
+ wl12xx_error("cannot start because not in off state: %d",
+ wl->state);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ret = wl12xx_chip_wakeup(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl->chip.op_boot(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl->chip.op_hw_init(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wl12xx_acx_station_id(wl);
+ if (ret < 0)
+ goto out;
+
+ wl->state = WL12XX_STATE_ON;
+
+ wl12xx_info("firmware booted (%s)", wl->chip.fw_ver);
+
+out:
+ if (ret < 0)
+ wl12xx_power_off(wl);
+
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+static void wl12xx_op_stop(struct ieee80211_hw *hw)
+{
+ struct wl12xx *wl = hw->priv;
+
+ wl12xx_info("down");
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 stop");
+
+ mutex_lock(&wl->mutex);
+
+ WARN_ON(wl->state != WL12XX_STATE_ON);
+
+ if (wl->scanning) {
+ mutex_unlock(&wl->mutex);
+ ieee80211_scan_completed(wl->hw, true);
+ mutex_lock(&wl->mutex);
+ wl->scanning = false;
+ }
+
+ wl->state = WL12XX_STATE_OFF;
+
+ wl12xx_disable_interrupts(wl);
+
+ mutex_unlock(&wl->mutex);
+
+ cancel_work_sync(&wl->irq_work);
+ cancel_work_sync(&wl->tx_work);
+ cancel_work_sync(&wl->filter_work);
+
+ mutex_lock(&wl->mutex);
+
+ /* let's notify MAC80211 about the remaining pending TX frames */
+ wl12xx_tx_flush(wl);
+
+ wl12xx_power_off(wl);
+
+ memset(wl->bssid, 0, ETH_ALEN);
+ wl->listen_int = 1;
+ wl->bss_type = MAX_BSS_TYPE;
+
+ wl->data_in_count = 0;
+ wl->rx_counter = 0;
+ wl->rx_handled = 0;
+ wl->rx_current_buffer = 0;
+ wl->rx_last_id = 0;
+ wl->next_tx_complete = 0;
+ wl->elp = false;
+ wl->psm = 0;
+ wl->tx_queue_stopped = false;
+ wl->power_level = WL12XX_DEFAULT_POWER_LEVEL;
+
+ wl12xx_debugfs_reset(wl);
+
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl12xx_op_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct wl12xx *wl = hw->priv;
+ DECLARE_MAC_BUF(mac);
+ int ret = 0;
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %s",
+ conf->type, print_mac(mac, conf->mac_addr));
+
+ mutex_lock(&wl->mutex);
+
+ switch (conf->type) {
+ case NL80211_IFTYPE_STATION:
+ wl->bss_type = BSS_TYPE_STA_BSS;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ wl->bss_type = BSS_TYPE_IBSS;
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (memcmp(wl->mac_addr, conf->mac_addr, ETH_ALEN)) {
+ memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
+ SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+ ret = wl12xx_acx_station_id(wl);
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+ mutex_unlock(&wl->mutex);
+ return ret;
+}
+
+static void wl12xx_op_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_if_init_conf *conf)
+{
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 remove interface");
+}
+
+static int wl12xx_build_null_data(struct wl12xx *wl)
+{
+ struct wl12xx_null_data_template template;
+
+ if (!is_zero_ether_addr(wl->bssid)) {
+ memcpy(template.header.da, wl->bssid, ETH_ALEN);
+ memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
+ } else {
+ memset(template.header.da, 0xff, ETH_ALEN);
+ memset(template.header.bssid, 0xff, ETH_ALEN);
+ }
+
+ memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+ template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
+ IEEE80211_STYPE_NULLFUNC);
+
+ return wl12xx_cmd_template_set(wl, CMD_NULL_DATA, &template,
+ sizeof(template));
+
+}
+
+static int wl12xx_build_ps_poll(struct wl12xx *wl, u16 aid)
+{
+ struct wl12xx_ps_poll_template template;
+
+ memcpy(template.bssid, wl->bssid, ETH_ALEN);
+ memcpy(template.ta, wl->mac_addr, ETH_ALEN);
+ template.aid = aid;
+ template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
+
+ return wl12xx_cmd_template_set(wl, CMD_PS_POLL, &template,
+ sizeof(template));
+
+}
+
+static int wl12xx_op_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct wl12xx *wl = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ int channel, ret = 0;
+
+ channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
+ channel,
+ conf->flags & IEEE80211_CONF_PS ? "on" : "off",
+ conf->power_level);
+
+ mutex_lock(&wl->mutex);
+
+ if (channel != wl->channel) {
+ /* FIXME: use beacon interval provided by mac80211 */
+ ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+ if (ret < 0)
+ goto out;
+
+ wl->channel = channel;
+ }
+
+ ret = wl12xx_build_null_data(wl);
+ if (ret < 0)
+ goto out;
+
+ if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
+ wl12xx_info("psm enabled");
+
+ wl->psm_requested = true;
+
+ /*
+ * We enter PSM only if we're already associated.
+ * If we're not, we'll enter it when joining an SSID,
+ * through the bss_info_changed() hook.
+ */
+ ret = wl12xx_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+ } else if (!(conf->flags & IEEE80211_CONF_PS) &&
+ wl->psm_requested) {
+ wl12xx_info("psm disabled");
+
+ wl->psm_requested = false;
+
+ if (wl->psm)
+ ret = wl12xx_ps_set_mode(wl, STATION_ACTIVE_MODE);
+ }
+
+ if (conf->power_level != wl->power_level) {
+ ret = wl12xx_acx_tx_power(wl, conf->power_level);
+ if (ret < 0)
+ goto out;
+
+ wl->power_level = conf->power_level;
+ }
+
+out:
+ mutex_unlock(&wl->mutex);
+ return ret;
+}
+
+#define WL12XX_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
+ FIF_ALLMULTI | \
+ FIF_FCSFAIL | \
+ FIF_BCN_PRBRESP_PROMISC | \
+ FIF_CONTROL | \
+ FIF_OTHER_BSS)
+
+static void wl12xx_op_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed,
+ unsigned int *total,
+ int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ struct wl12xx *wl = hw->priv;
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 configure filter");
+
+ *total &= WL12XX_SUPPORTED_FILTERS;
+ changed &= WL12XX_SUPPORTED_FILTERS;
+
+ if (changed == 0)
+ /* no filters which we support changed */
+ return;
+
+ /* FIXME: wl->rx_config and wl->rx_filter are not protected */
+
+ wl->rx_config = WL12XX_DEFAULT_RX_CONFIG;
+ wl->rx_filter = WL12XX_DEFAULT_RX_FILTER;
+
+ if (*total & FIF_PROMISC_IN_BSS) {
+ wl->rx_config |= CFG_BSSID_FILTER_EN;
+ wl->rx_config |= CFG_RX_ALL_GOOD;
+ }
+ if (*total & FIF_ALLMULTI)
+ /*
+ * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
+ * all multicast frames
+ */
+ wl->rx_config &= ~CFG_MC_FILTER_EN;
+ if (*total & FIF_FCSFAIL)
+ wl->rx_filter |= CFG_RX_FCS_ERROR;
+ if (*total & FIF_BCN_PRBRESP_PROMISC) {
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+ wl->rx_config &= ~CFG_SSID_FILTER_EN;
+ }
+ if (*total & FIF_CONTROL)
+ wl->rx_filter |= CFG_RX_CTL_EN;
+ if (*total & FIF_OTHER_BSS)
+ wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
+
+ /*
+ * FIXME: workqueues need to be properly cancelled on stop(), for
+ * now let's just disable changing the filter settings. They will
+ * be updated any on config().
+ */
+ /* schedule_work(&wl->filter_work); */
+}
+
+/* HW encryption */
+static int wl12xx_set_key_type(struct wl12xx *wl, struct acx_set_key *key,
+ enum set_key_cmd cmd,
+ struct ieee80211_key_conf *mac80211_key,
+ const u8 *addr)
+{
+ switch (mac80211_key->alg) {
+ case ALG_WEP:
+ if (is_broadcast_ether_addr(addr))
+ key->key_type = KEY_WEP_DEFAULT;
+ else
+ key->key_type = KEY_WEP_ADDR;
+
+ mac80211_key->hw_key_idx = mac80211_key->keyidx;
+ break;
+ case ALG_TKIP:
+ if (is_broadcast_ether_addr(addr))
+ key->key_type = KEY_TKIP_MIC_GROUP;
+ else
+ key->key_type = KEY_TKIP_MIC_PAIRWISE;
+
+ mac80211_key->hw_key_idx = mac80211_key->keyidx;
+ break;
+ case ALG_CCMP:
+ if (is_broadcast_ether_addr(addr))
+ key->key_type = KEY_AES_GROUP;
+ else
+ key->key_type = KEY_AES_PAIRWISE;
+ mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ break;
+ default:
+ wl12xx_error("Unknown key algo 0x%x", mac80211_key->alg);
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int wl12xx_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct wl12xx *wl = hw->priv;
+ struct acx_set_key wl_key;
+ const u8 *addr;
+ int ret;
+
+ static const u8 bcast_addr[ETH_ALEN] =
+ { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 set key");
+
+ memset(&wl_key, 0, sizeof(wl_key));
+
+ addr = sta ? sta->addr : bcast_addr;
+
+ wl12xx_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
+ wl12xx_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
+ wl12xx_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
+ key->alg, key->keyidx, key->keylen, key->flags);
+ wl12xx_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
+
+ mutex_lock(&wl->mutex);
+
+ switch (cmd) {
+ case SET_KEY:
+ wl_key.key_action = KEY_ADD_OR_REPLACE;
+ break;
+ case DISABLE_KEY:
+ wl_key.key_action = KEY_REMOVE;
+ break;
+ default:
+ wl12xx_error("Unsupported key cmd 0x%x", cmd);
+ break;
+ }
+
+ ret = wl12xx_set_key_type(wl, &wl_key, cmd, key, addr);
+ if (ret < 0) {
+ wl12xx_error("Set KEY type failed");
+ goto out;
+ }
+
+ if (wl_key.key_type != KEY_WEP_DEFAULT)
+ memcpy(wl_key.addr, addr, ETH_ALEN);
+
+ if ((wl_key.key_type == KEY_TKIP_MIC_GROUP) ||
+ (wl_key.key_type == KEY_TKIP_MIC_PAIRWISE)) {
+ /*
+ * We get the key in the following form:
+ * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
+ * but the target is expecting:
+ * TKIP - RX MIC - TX MIC
+ */
+ memcpy(wl_key.key, key->key, 16);
+ memcpy(wl_key.key + 16, key->key + 24, 8);
+ memcpy(wl_key.key + 24, key->key + 16, 8);
+
+ } else {
+ memcpy(wl_key.key, key->key, key->keylen);
+ }
+ wl_key.key_size = key->keylen;
+
+ wl_key.id = key->keyidx;
+ wl_key.ssid_profile = 0;
+
+ wl12xx_dump(DEBUG_CRYPT, "TARGET KEY: ", &wl_key, sizeof(wl_key));
+
+ if (wl12xx_cmd_send(wl, CMD_SET_KEYS, &wl_key, sizeof(wl_key)) < 0) {
+ wl12xx_error("Set KEY failed");
+ ret = -EOPNOTSUPP;
+ goto out;
+ }
+
+out:
+ mutex_unlock(&wl->mutex);
+ return ret;
+}
+
+static int wl12xx_build_basic_rates(char *rates)
+{
+ u8 index = 0;
+
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
+ rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+
+ return index;
+}
+
+static int wl12xx_build_extended_rates(char *rates)
+{
+ u8 index = 0;
+
+ rates[index++] = IEEE80211_OFDM_RATE_6MB;
+ rates[index++] = IEEE80211_OFDM_RATE_9MB;
+ rates[index++] = IEEE80211_OFDM_RATE_12MB;
+ rates[index++] = IEEE80211_OFDM_RATE_18MB;
+ rates[index++] = IEEE80211_OFDM_RATE_24MB;
+ rates[index++] = IEEE80211_OFDM_RATE_36MB;
+ rates[index++] = IEEE80211_OFDM_RATE_48MB;
+ rates[index++] = IEEE80211_OFDM_RATE_54MB;
+
+ return index;
+}
+
+
+static int wl12xx_build_probe_req(struct wl12xx *wl, u8 *ssid, size_t ssid_len)
+{
+ struct wl12xx_probe_req_template template;
+ struct wl12xx_ie_rates *rates;
+ char *ptr;
+ u16 size;
+
+ ptr = (char *)&template;
+ size = sizeof(struct ieee80211_header);
+
+ memset(template.header.da, 0xff, ETH_ALEN);
+ memset(template.header.bssid, 0xff, ETH_ALEN);
+ memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
+ template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+
+ /* IEs */
+ /* SSID */
+ template.ssid.header.id = WLAN_EID_SSID;
+ template.ssid.header.len = ssid_len;
+ if (ssid_len && ssid)
+ memcpy(template.ssid.ssid, ssid, ssid_len);
+ size += sizeof(struct wl12xx_ie_header) + ssid_len;
+ ptr += size;
+
+ /* Basic Rates */
+ rates = (struct wl12xx_ie_rates *)ptr;
+ rates->header.id = WLAN_EID_SUPP_RATES;
+ rates->header.len = wl12xx_build_basic_rates(rates->rates);
+ size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+ ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+ /* Extended rates */
+ rates = (struct wl12xx_ie_rates *)ptr;
+ rates->header.id = WLAN_EID_EXT_SUPP_RATES;
+ rates->header.len = wl12xx_build_extended_rates(rates->rates);
+ size += sizeof(struct wl12xx_ie_header) + rates->header.len;
+
+ wl12xx_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
+
+ return wl12xx_cmd_template_set(wl, CMD_PROBE_REQ, &template,
+ size);
+}
+
+static int wl12xx_hw_scan(struct wl12xx *wl, u8 *ssid, size_t len,
+ u8 active_scan, u8 high_prio, u8 num_channels,
+ u8 probe_requests)
+{
+ int i, ret;
+ u32 split_scan = 0;
+ u16 scan_options = 0;
+ struct cmd_scan *params;
+ struct wl12xx_command *cmd_answer;
+
+ if (wl->scanning)
+ return -EINVAL;
+
+ params = kzalloc(sizeof(*params), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
+ params->params.rx_filter_options =
+ cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
+
+ /* High priority scan */
+ if (!active_scan)
+ scan_options |= SCAN_PASSIVE;
+ if (high_prio)
+ scan_options |= SCAN_PRIORITY_HIGH;
+ params->params.scan_options = scan_options;
+
+ params->params.num_channels = num_channels;
+ params->params.num_probe_requests = probe_requests;
+ params->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
+ params->params.tid_trigger = 0;
+
+ for (i = 0; i < num_channels; i++) {
+ params->channels[i].min_duration = cpu_to_le32(30000);
+ params->channels[i].max_duration = cpu_to_le32(60000);
+ memset(&params->channels[i].bssid_lsb, 0xff, 4);
+ memset(&params->channels[i].bssid_msb, 0xff, 2);
+ params->channels[i].early_termination = 0;
+ params->channels[i].tx_power_att = 0;
+ params->channels[i].channel = i + 1;
+ memset(params->channels[i].pad, 0, 3);
+ }
+
+ for (i = num_channels; i < SCAN_MAX_NUM_OF_CHANNELS; i++)
+ memset(&params->channels[i], 0,
+ sizeof(struct basic_scan_channel_parameters));
+
+ if (len && ssid) {
+ params->params.ssid_len = len;
+ memcpy(params->params.ssid, ssid, len);
+ } else {
+ params->params.ssid_len = 0;
+ memset(params->params.ssid, 0, 32);
+ }
+
+ ret = wl12xx_build_probe_req(wl, ssid, len);
+ if (ret < 0) {
+ wl12xx_error("PROBE request template failed");
+ goto out;
+ }
+
+ ret = wl12xx_cmd_send(wl, CMD_TRIGGER_SCAN_TO, &split_scan,
+ sizeof(u32));
+ if (ret < 0) {
+ wl12xx_error("Split SCAN failed");
+ goto out;
+ }
+
+ wl12xx_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
+
+ wl->scanning = true;
+
+ ret = wl12xx_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
+ if (ret < 0)
+ wl12xx_error("SCAN failed");
+
+ wl12xx_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
+
+ cmd_answer = (struct wl12xx_command *) params;
+ if (cmd_answer->status != CMD_STATUS_SUCCESS) {
+ wl12xx_error("TEST command answer error: %d",
+ cmd_answer->status);
+ wl->scanning = false;
+ ret = -EIO;
+ goto out;
+ }
+
+out:
+ kfree(params);
+ return ret;
+
+}
+
+static int wl12xx_op_hw_scan(struct ieee80211_hw *hw,
+ struct cfg80211_scan_request *req)
+{
+ struct wl12xx *wl = hw->priv;
+ int ret;
+ u8 *ssid = NULL;
+ size_t ssid_len = 0;
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 hw scan");
+
+ if (req->n_ssids) {
+ ssid = req->ssids[0].ssid;
+ ssid_len = req->ssids[0].ssid_len;
+ }
+
+ mutex_lock(&wl->mutex);
+ ret = wl12xx_hw_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3);
+ mutex_unlock(&wl->mutex);
+
+ return ret;
+}
+
+static int wl12xx_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+ struct wl12xx *wl = hw->priv;
+ int ret;
+
+ ret = wl12xx_acx_rts_threshold(wl, (u16) value);
+
+ if (ret < 0)
+ wl12xx_warning("wl12xx_op_set_rts_threshold failed: %d", ret);
+
+ return ret;
+}
+
+static void wl12xx_op_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changed)
+{
+ enum acx_ps_mode mode;
+ struct wl12xx *wl = hw->priv;
+ struct sk_buff *beacon;
+ int ret;
+
+ wl12xx_debug(DEBUG_MAC80211, "mac80211 bss info changed");
+
+ mutex_lock(&wl->mutex);
+
+ if (changed & BSS_CHANGED_ASSOC) {
+ if (bss_conf->assoc) {
+ wl->aid = bss_conf->aid;
+
+ ret = wl12xx_build_ps_poll(wl, wl->aid);
+ if (ret < 0)
+ goto out;
+
+ ret = wl12xx_acx_aid(wl, wl->aid);
+ if (ret < 0)
+ goto out;
+
+ /* If we want to go in PSM but we're not there yet */
+ if (wl->psm_requested && !wl->psm) {
+ mode = STATION_POWER_SAVE_MODE;
+ ret = wl12xx_ps_set_mode(wl, mode);
+ if (ret < 0)
+ goto out;
+ }
+ }
+ }
+ if (changed & BSS_CHANGED_ERP_SLOT) {
+ if (bss_conf->use_short_slot)
+ ret = wl12xx_acx_slot(wl, SLOT_TIME_SHORT);
+ else
+ ret = wl12xx_acx_slot(wl, SLOT_TIME_LONG);
+ if (ret < 0) {
+ wl12xx_warning("Set slot time failed %d", ret);
+ goto out;
+ }
+ }
+
+ if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+ if (bss_conf->use_short_preamble)
+ wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
+ else
+ wl12xx_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
+ }
+
+ if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+ if (bss_conf->use_cts_prot)
+ ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_ENABLE);
+ else
+ ret = wl12xx_acx_cts_protect(wl, CTSPROTECT_DISABLE);
+ if (ret < 0) {
+ wl12xx_warning("Set ctsprotect failed %d", ret);
+ goto out;
+ }
+ }
+
+ if (changed & BSS_CHANGED_BSSID) {
+ memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+
+ ret = wl12xx_build_null_data(wl);
+ if (ret < 0)
+ goto out;
+
+ if (wl->bss_type != BSS_TYPE_IBSS) {
+ ret = wl12xx_cmd_join(wl, wl->bss_type, 5, 100, 1);
+ if (ret < 0)
+ goto out;
+ }
+ }
+
+ if (changed & BSS_CHANGED_BEACON) {
+ beacon = ieee80211_beacon_get(hw, vif);
+ ret = wl12xx_cmd_template_set(wl, CMD_BEACON, beacon->data,
+ beacon->len);
+
+ if (ret < 0) {
+ dev_kfree_skb(beacon);
+ goto out;
+ }
+
+ ret = wl12xx_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
+ beacon->len);
+
+ dev_kfree_skb(beacon);
+
+ if (ret < 0)
+ goto out;
+
+ ret = wl12xx_cmd_join(wl, wl->bss_type, 1, 100, 0);
+
+ if (ret < 0)
+ goto out;
+ }
+
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_rate wl12xx_rates[] = {
+ { .bitrate = 10,
+ .hw_value = 0x1,
+ .hw_value_short = 0x1, },
+ { .bitrate = 20,
+ .hw_value = 0x2,
+ .hw_value_short = 0x2,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55,
+ .hw_value = 0x4,
+ .hw_value_short = 0x4,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110,
+ .hw_value = 0x20,
+ .hw_value_short = 0x20,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60,
+ .hw_value = 0x8,
+ .hw_value_short = 0x8, },
+ { .bitrate = 90,
+ .hw_value = 0x10,
+ .hw_value_short = 0x10, },
+ { .bitrate = 120,
+ .hw_value = 0x40,
+ .hw_value_short = 0x40, },
+ { .bitrate = 180,
+ .hw_value = 0x80,
+ .hw_value_short = 0x80, },
+ { .bitrate = 240,
+ .hw_value = 0x200,
+ .hw_value_short = 0x200, },
+ { .bitrate = 360,
+ .hw_value = 0x400,
+ .hw_value_short = 0x400, },
+ { .bitrate = 480,
+ .hw_value = 0x800,
+ .hw_value_short = 0x800, },
+ { .bitrate = 540,
+ .hw_value = 0x1000,
+ .hw_value_short = 0x1000, },
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_channel wl12xx_channels[] = {
+ { .hw_value = 1, .center_freq = 2412},
+ { .hw_value = 2, .center_freq = 2417},
+ { .hw_value = 3, .center_freq = 2422},
+ { .hw_value = 4, .center_freq = 2427},
+ { .hw_value = 5, .center_freq = 2432},
+ { .hw_value = 6, .center_freq = 2437},
+ { .hw_value = 7, .center_freq = 2442},
+ { .hw_value = 8, .center_freq = 2447},
+ { .hw_value = 9, .center_freq = 2452},
+ { .hw_value = 10, .center_freq = 2457},
+ { .hw_value = 11, .center_freq = 2462},
+ { .hw_value = 12, .center_freq = 2467},
+ { .hw_value = 13, .center_freq = 2472},
+};
+
+/* can't be const, mac80211 writes to this */
+static struct ieee80211_supported_band wl12xx_band_2ghz = {
+ .channels = wl12xx_channels,
+ .n_channels = ARRAY_SIZE(wl12xx_channels),
+ .bitrates = wl12xx_rates,
+ .n_bitrates = ARRAY_SIZE(wl12xx_rates),
+};
+
+static const struct ieee80211_ops wl12xx_ops = {
+ .start = wl12xx_op_start,
+ .stop = wl12xx_op_stop,
+ .add_interface = wl12xx_op_add_interface,
+ .remove_interface = wl12xx_op_remove_interface,
+ .config = wl12xx_op_config,
+ .configure_filter = wl12xx_op_configure_filter,
+ .tx = wl12xx_op_tx,
+ .set_key = wl12xx_op_set_key,
+ .hw_scan = wl12xx_op_hw_scan,
+ .bss_info_changed = wl12xx_op_bss_info_changed,
+ .set_rts_threshold = wl12xx_op_set_rts_threshold,
+};
+
+static int wl12xx_register_hw(struct wl12xx *wl)
+{
+ int ret;
+
+ if (wl->mac80211_registered)
+ return 0;
+
+ SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
+
+ ret = ieee80211_register_hw(wl->hw);
+ if (ret < 0) {
+ wl12xx_error("unable to register mac80211 hw: %d", ret);
+ return ret;
+ }
+
+ wl->mac80211_registered = true;
+
+ wl12xx_notice("loaded");
+
+ return 0;
+}
+
+static int wl12xx_init_ieee80211(struct wl12xx *wl)
+{
+ /* The tx descriptor buffer and the TKIP space */
+ wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
+ + WL12XX_TKIP_IV_SPACE;
+
+ /* unit us */
+ /* FIXME: find a proper value */
+ wl->hw->channel_change_time = 10000;
+
+ wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_NOISE_DBM;
+
+ wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ wl->hw->wiphy->max_scan_ssids = 1;
+ wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl12xx_band_2ghz;
+
+ SET_IEEE80211_DEV(wl->hw, &wl->spi->dev);
+
+ return 0;
+}
+
+#define WL12XX_DEFAULT_CHANNEL 1
+static int __devinit wl12xx_probe(struct spi_device *spi)
+{
+ struct wl12xx_platform_data *pdata;
+ struct ieee80211_hw *hw;
+ struct wl12xx *wl;
+ int ret, i;
+ static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
+
+ pdata = spi->dev.platform_data;
+ if (!pdata) {
+ wl12xx_error("no platform data");
+ return -ENODEV;
+ }
+
+ hw = ieee80211_alloc_hw(sizeof(*wl), &wl12xx_ops);
+ if (!hw) {
+ wl12xx_error("could not alloc ieee80211_hw");
+ return -ENOMEM;
+ }
+
+ wl = hw->priv;
+ memset(wl, 0, sizeof(*wl));
+
+ wl->hw = hw;
+ dev_set_drvdata(&spi->dev, wl);
+ wl->spi = spi;
+
+ wl->data_in_count = 0;
+
+ skb_queue_head_init(&wl->tx_queue);
+
+ INIT_WORK(&wl->tx_work, wl12xx_tx_work);
+ INIT_WORK(&wl->filter_work, wl12xx_filter_work);
+ wl->channel = WL12XX_DEFAULT_CHANNEL;
+ wl->scanning = false;
+ wl->default_key = 0;
+ wl->listen_int = 1;
+ wl->rx_counter = 0;
+ wl->rx_handled = 0;
+ wl->rx_current_buffer = 0;
+ wl->rx_last_id = 0;
+ wl->rx_config = WL12XX_DEFAULT_RX_CONFIG;
+ wl->rx_filter = WL12XX_DEFAULT_RX_FILTER;
+ wl->elp = false;
+ wl->psm = 0;
+ wl->psm_requested = false;
+ wl->tx_queue_stopped = false;
+ wl->power_level = WL12XX_DEFAULT_POWER_LEVEL;
+
+ /* We use the default power on sleep time until we know which chip
+ * we're using */
+ wl->chip.power_on_sleep = WL12XX_DEFAULT_POWER_ON_SLEEP;
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ wl->tx_frames[i] = NULL;
+
+ wl->next_tx_complete = 0;
+
+ /*
+ * In case our MAC address is not correctly set,
+ * we use a random but Nokia MAC.
+ */
+ memcpy(wl->mac_addr, nokia_oui, 3);
+ get_random_bytes(wl->mac_addr + 3, 3);
+
+ wl->state = WL12XX_STATE_OFF;
+ mutex_init(&wl->mutex);
+
+ wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
+ wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;
+
+ /* This is the only SPI value that we need to set here, the rest
+ * comes from the board-peripherals file */
+ spi->bits_per_word = 32;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ wl12xx_error("spi_setup failed");
+ goto out_free;
+ }
+
+ wl->set_power = pdata->set_power;
+ if (!wl->set_power) {
+ wl12xx_error("set power function missing in platform data");
+ return -ENODEV;
+ }
+
+ wl->irq = spi->irq;
+ if (wl->irq < 0) {
+ wl12xx_error("irq missing in platform data");
+ return -ENODEV;
+ }
+
+ ret = request_irq(wl->irq, wl12xx_irq, 0, DRIVER_NAME, wl);
+ if (ret < 0) {
+ wl12xx_error("request_irq() failed: %d", ret);
+ goto out_free;
+ }
+
+ set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+
+ disable_irq(wl->irq);
+
+ ret = wl12xx_init_ieee80211(wl);
+ if (ret)
+ goto out_irq;
+
+ ret = wl12xx_register_hw(wl);
+ if (ret)
+ goto out_irq;
+
+ wl12xx_debugfs_init(wl);
+
+ wl12xx_notice("initialized");
+
+ return 0;
+
+ out_irq:
+ free_irq(wl->irq, wl);
+
+ out_free:
+ ieee80211_free_hw(hw);
+
+ return ret;
+}
+
+static int __devexit wl12xx_remove(struct spi_device *spi)
+{
+ struct wl12xx *wl = dev_get_drvdata(&spi->dev);
+
+ ieee80211_unregister_hw(wl->hw);
+
+ wl12xx_debugfs_exit(wl);
+
+ free_irq(wl->irq, wl);
+ kfree(wl->target_mem_map);
+ kfree(wl->data_path);
+ kfree(wl->fw);
+ wl->fw = NULL;
+ kfree(wl->nvs);
+ wl->nvs = NULL;
+ ieee80211_free_hw(wl->hw);
+
+ return 0;
+}
+
+
+static struct spi_driver wl12xx_spi_driver = {
+ .driver = {
+ .name = "wl12xx",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+
+ .probe = wl12xx_probe,
+ .remove = __devexit_p(wl12xx_remove),
+};
+
+static int __init wl12xx_init(void)
+{
+ int ret;
+
+ ret = spi_register_driver(&wl12xx_spi_driver);
+ if (ret < 0) {
+ wl12xx_error("failed to register spi driver: %d", ret);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+static void __exit wl12xx_exit(void)
+{
+ spi_unregister_driver(&wl12xx_spi_driver);
+
+ wl12xx_notice("unloaded");
+}
+
+module_init(wl12xx_init);
+module_exit(wl12xx_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <Kalle.Valo@nokia.com>, "
+ "Luciano Coelho <luciano.coelho@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/ps.c b/drivers/net/wireless/wl12xx/ps.c
new file mode 100644
index 00000000000..83a10117330
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/ps.c
@@ -0,0 +1,151 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "reg.h"
+#include "ps.h"
+#include "spi.h"
+
+#define WL12XX_WAKEUP_TIMEOUT 2000
+
+/* Routines to toggle sleep mode while in ELP */
+void wl12xx_ps_elp_sleep(struct wl12xx *wl)
+{
+ if (wl->elp || !wl->psm)
+ return;
+
+ wl12xx_debug(DEBUG_PSM, "chip to elp");
+
+ wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+
+ wl->elp = true;
+}
+
+int wl12xx_ps_elp_wakeup(struct wl12xx *wl)
+{
+ unsigned long timeout;
+ u32 elp_reg;
+
+ if (!wl->elp)
+ return 0;
+
+ wl12xx_debug(DEBUG_PSM, "waking up chip from elp");
+
+ timeout = jiffies + msecs_to_jiffies(WL12XX_WAKEUP_TIMEOUT);
+
+ wl12xx_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+
+ elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+
+ /*
+ * FIXME: we should wait for irq from chip but, as a temporary
+ * solution to simplify locking, let's poll instead
+ */
+ while (!(elp_reg & ELPCTRL_WLAN_READY)) {
+ if (time_after(jiffies, timeout)) {
+ wl12xx_error("elp wakeup timeout");
+ return -ETIMEDOUT;
+ }
+ msleep(1);
+ elp_reg = wl12xx_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+ }
+
+ wl12xx_debug(DEBUG_PSM, "wakeup time: %u ms",
+ jiffies_to_msecs(jiffies) -
+ (jiffies_to_msecs(timeout) - WL12XX_WAKEUP_TIMEOUT));
+
+ wl->elp = false;
+
+ return 0;
+}
+
+static int wl12xx_ps_set_elp(struct wl12xx *wl, bool enable)
+{
+ int ret;
+
+ if (enable) {
+ wl12xx_debug(DEBUG_PSM, "sleep auth psm/elp");
+
+ /*
+ * FIXME: we should PSM_ELP, but because of firmware wakeup
+ * problems let's use only PSM_PS
+ */
+ ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_PS);
+ if (ret < 0)
+ return ret;
+
+ wl12xx_ps_elp_sleep(wl);
+ } else {
+ wl12xx_debug(DEBUG_PSM, "sleep auth cam");
+
+ /*
+ * When the target is in ELP, we can only
+ * access the ELP control register. Thus,
+ * we have to wake the target up before
+ * changing the power authorization.
+ */
+
+ wl12xx_ps_elp_wakeup(wl);
+
+ ret = wl12xx_acx_sleep_auth(wl, WL12XX_PSM_CAM);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode)
+{
+ int ret;
+
+ switch (mode) {
+ case STATION_POWER_SAVE_MODE:
+ wl12xx_debug(DEBUG_PSM, "entering psm");
+ ret = wl12xx_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_ps_set_elp(wl, true);
+ if (ret < 0)
+ return ret;
+
+ wl->psm = 1;
+ break;
+ case STATION_ACTIVE_MODE:
+ default:
+ wl12xx_debug(DEBUG_PSM, "leaving psm");
+ ret = wl12xx_ps_set_elp(wl, false);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
+ if (ret < 0)
+ return ret;
+
+ wl->psm = 0;
+ break;
+ }
+
+ return ret;
+}
+
diff --git a/drivers/net/wireless/wl12xx/ps.h b/drivers/net/wireless/wl12xx/ps.h
new file mode 100644
index 00000000000..5d7c5255383
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/ps.h
@@ -0,0 +1,36 @@
+#ifndef __WL12XX_PS_H__
+#define __WL12XX_PS_H__
+
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl12xx.h"
+#include "acx.h"
+
+int wl12xx_ps_set_mode(struct wl12xx *wl, enum acx_ps_mode mode);
+void wl12xx_ps_elp_sleep(struct wl12xx *wl);
+int wl12xx_ps_elp_wakeup(struct wl12xx *wl);
+
+
+#endif /* __WL12XX_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/reg.h b/drivers/net/wireless/wl12xx/reg.h
new file mode 100644
index 00000000000..e421643215c
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/reg.h
@@ -0,0 +1,745 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __REG_H__
+#define __REG_H__
+
+#include <linux/bitops.h>
+#include "wl12xx.h"
+
+#define REGISTERS_BASE 0x00300000
+#define DRPW_BASE 0x00310000
+
+#define REGISTERS_DOWN_SIZE 0x00008800
+#define REGISTERS_WORK_SIZE 0x0000b000
+
+#define HW_ACCESS_ELP_CTRL_REG_ADDR 0x1FFFC
+
+/* ELP register commands */
+#define ELPCTRL_WAKE_UP 0x1
+#define ELPCTRL_WAKE_UP_WLAN_READY 0x5
+#define ELPCTRL_SLEEP 0x0
+/* ELP WLAN_READY bit */
+#define ELPCTRL_WLAN_READY 0x2
+
+/*
+ * Interrupt registers.
+ * 64 bit interrupt sources registers ws ced.
+ * sme interupts were removed and new ones were added.
+ * Order was changed.
+ */
+#define FIQ_MASK (REGISTERS_BASE + 0x0400)
+#define FIQ_MASK_L (REGISTERS_BASE + 0x0400)
+#define FIQ_MASK_H (REGISTERS_BASE + 0x0404)
+#define FIQ_MASK_SET (REGISTERS_BASE + 0x0408)
+#define FIQ_MASK_SET_L (REGISTERS_BASE + 0x0408)
+#define FIQ_MASK_SET_H (REGISTERS_BASE + 0x040C)
+#define FIQ_MASK_CLR (REGISTERS_BASE + 0x0410)
+#define FIQ_MASK_CLR_L (REGISTERS_BASE + 0x0410)
+#define FIQ_MASK_CLR_H (REGISTERS_BASE + 0x0414)
+#define IRQ_MASK (REGISTERS_BASE + 0x0418)
+#define IRQ_MASK_L (REGISTERS_BASE + 0x0418)
+#define IRQ_MASK_H (REGISTERS_BASE + 0x041C)
+#define IRQ_MASK_SET (REGISTERS_BASE + 0x0420)
+#define IRQ_MASK_SET_L (REGISTERS_BASE + 0x0420)
+#define IRQ_MASK_SET_H (REGISTERS_BASE + 0x0424)
+#define IRQ_MASK_CLR (REGISTERS_BASE + 0x0428)
+#define IRQ_MASK_CLR_L (REGISTERS_BASE + 0x0428)
+#define IRQ_MASK_CLR_H (REGISTERS_BASE + 0x042C)
+#define ECPU_MASK (REGISTERS_BASE + 0x0448)
+#define FIQ_STS_L (REGISTERS_BASE + 0x044C)
+#define FIQ_STS_H (REGISTERS_BASE + 0x0450)
+#define IRQ_STS_L (REGISTERS_BASE + 0x0454)
+#define IRQ_STS_H (REGISTERS_BASE + 0x0458)
+#define INT_STS_ND (REGISTERS_BASE + 0x0464)
+#define INT_STS_RAW_L (REGISTERS_BASE + 0x0464)
+#define INT_STS_RAW_H (REGISTERS_BASE + 0x0468)
+#define INT_STS_CLR (REGISTERS_BASE + 0x04B4)
+#define INT_STS_CLR_L (REGISTERS_BASE + 0x04B4)
+#define INT_STS_CLR_H (REGISTERS_BASE + 0x04B8)
+#define INT_ACK (REGISTERS_BASE + 0x046C)
+#define INT_ACK_L (REGISTERS_BASE + 0x046C)
+#define INT_ACK_H (REGISTERS_BASE + 0x0470)
+#define INT_TRIG (REGISTERS_BASE + 0x0474)
+#define INT_TRIG_L (REGISTERS_BASE + 0x0474)
+#define INT_TRIG_H (REGISTERS_BASE + 0x0478)
+#define HOST_STS_L (REGISTERS_BASE + 0x045C)
+#define HOST_STS_H (REGISTERS_BASE + 0x0460)
+#define HOST_MASK (REGISTERS_BASE + 0x0430)
+#define HOST_MASK_L (REGISTERS_BASE + 0x0430)
+#define HOST_MASK_H (REGISTERS_BASE + 0x0434)
+#define HOST_MASK_SET (REGISTERS_BASE + 0x0438)
+#define HOST_MASK_SET_L (REGISTERS_BASE + 0x0438)
+#define HOST_MASK_SET_H (REGISTERS_BASE + 0x043C)
+#define HOST_MASK_CLR (REGISTERS_BASE + 0x0440)
+#define HOST_MASK_CLR_L (REGISTERS_BASE + 0x0440)
+#define HOST_MASK_CLR_H (REGISTERS_BASE + 0x0444)
+
+/* Host Interrupts*/
+#define HINT_MASK (REGISTERS_BASE + 0x0494)
+#define HINT_MASK_SET (REGISTERS_BASE + 0x0498)
+#define HINT_MASK_CLR (REGISTERS_BASE + 0x049C)
+#define HINT_STS_ND_MASKED (REGISTERS_BASE + 0x04A0)
+/*1150 spec calls this HINT_STS_RAW*/
+#define HINT_STS_ND (REGISTERS_BASE + 0x04B0)
+#define HINT_STS_CLR (REGISTERS_BASE + 0x04A4)
+#define HINT_ACK (REGISTERS_BASE + 0x04A8)
+#define HINT_TRIG (REGISTERS_BASE + 0x04AC)
+
+/* Device Configuration registers*/
+#define SOR_CFG (REGISTERS_BASE + 0x0800)
+#define ECPU_CTRL (REGISTERS_BASE + 0x0804)
+#define HI_CFG (REGISTERS_BASE + 0x0808)
+#define EE_START (REGISTERS_BASE + 0x080C)
+
+#define CHIP_ID_B (REGISTERS_BASE + 0x5674)
+
+#define CHIP_ID_1251_PG10 (0x7010101)
+#define CHIP_ID_1251_PG11 (0x7020101)
+#define CHIP_ID_1251_PG12 (0x7030101)
+
+#define ENABLE (REGISTERS_BASE + 0x5450)
+
+/* Power Management registers */
+#define ELP_CFG_MODE (REGISTERS_BASE + 0x5804)
+#define ELP_CMD (REGISTERS_BASE + 0x5808)
+#define PLL_CAL_TIME (REGISTERS_BASE + 0x5810)
+#define CLK_REQ_TIME (REGISTERS_BASE + 0x5814)
+#define CLK_BUF_TIME (REGISTERS_BASE + 0x5818)
+
+#define CFG_PLL_SYNC_CNT (REGISTERS_BASE + 0x5820)
+
+/* Scratch Pad registers*/
+#define SCR_PAD0 (REGISTERS_BASE + 0x5608)
+#define SCR_PAD1 (REGISTERS_BASE + 0x560C)
+#define SCR_PAD2 (REGISTERS_BASE + 0x5610)
+#define SCR_PAD3 (REGISTERS_BASE + 0x5614)
+#define SCR_PAD4 (REGISTERS_BASE + 0x5618)
+#define SCR_PAD4_SET (REGISTERS_BASE + 0x561C)
+#define SCR_PAD4_CLR (REGISTERS_BASE + 0x5620)
+#define SCR_PAD5 (REGISTERS_BASE + 0x5624)
+#define SCR_PAD5_SET (REGISTERS_BASE + 0x5628)
+#define SCR_PAD5_CLR (REGISTERS_BASE + 0x562C)
+#define SCR_PAD6 (REGISTERS_BASE + 0x5630)
+#define SCR_PAD7 (REGISTERS_BASE + 0x5634)
+#define SCR_PAD8 (REGISTERS_BASE + 0x5638)
+#define SCR_PAD9 (REGISTERS_BASE + 0x563C)
+
+/* Spare registers*/
+#define SPARE_A1 (REGISTERS_BASE + 0x0994)
+#define SPARE_A2 (REGISTERS_BASE + 0x0998)
+#define SPARE_A3 (REGISTERS_BASE + 0x099C)
+#define SPARE_A4 (REGISTERS_BASE + 0x09A0)
+#define SPARE_A5 (REGISTERS_BASE + 0x09A4)
+#define SPARE_A6 (REGISTERS_BASE + 0x09A8)
+#define SPARE_A7 (REGISTERS_BASE + 0x09AC)
+#define SPARE_A8 (REGISTERS_BASE + 0x09B0)
+#define SPARE_B1 (REGISTERS_BASE + 0x5420)
+#define SPARE_B2 (REGISTERS_BASE + 0x5424)
+#define SPARE_B3 (REGISTERS_BASE + 0x5428)
+#define SPARE_B4 (REGISTERS_BASE + 0x542C)
+#define SPARE_B5 (REGISTERS_BASE + 0x5430)
+#define SPARE_B6 (REGISTERS_BASE + 0x5434)
+#define SPARE_B7 (REGISTERS_BASE + 0x5438)
+#define SPARE_B8 (REGISTERS_BASE + 0x543C)
+
+enum wl12xx_acx_int_reg {
+ ACX_REG_INTERRUPT_TRIG,
+ ACX_REG_INTERRUPT_TRIG_H,
+
+/*=============================================
+ Host Interrupt Mask Register - 32bit (RW)
+ ------------------------------------------
+ Setting a bit in this register masks the
+ corresponding interrupt to the host.
+ 0 - RX0 - Rx first dubble buffer Data Interrupt
+ 1 - TXD - Tx Data Interrupt
+ 2 - TXXFR - Tx Transfer Interrupt
+ 3 - RX1 - Rx second dubble buffer Data Interrupt
+ 4 - RXXFR - Rx Transfer Interrupt
+ 5 - EVENT_A - Event Mailbox interrupt
+ 6 - EVENT_B - Event Mailbox interrupt
+ 7 - WNONHST - Wake On Host Interrupt
+ 8 - TRACE_A - Debug Trace interrupt
+ 9 - TRACE_B - Debug Trace interrupt
+ 10 - CDCMP - Command Complete Interrupt
+ 11 -
+ 12 -
+ 13 -
+ 14 - ICOMP - Initialization Complete Interrupt
+ 16 - SG SE - Soft Gemini - Sense enable interrupt
+ 17 - SG SD - Soft Gemini - Sense disable interrupt
+ 18 - -
+ 19 - -
+ 20 - -
+ 21- -
+ Default: 0x0001
+*==============================================*/
+ ACX_REG_INTERRUPT_MASK,
+
+/*=============================================
+ Host Interrupt Mask Set 16bit, (Write only)
+ ------------------------------------------
+ Setting a bit in this register sets
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+==============================================*/
+ ACX_REG_HINT_MASK_SET,
+
+/*=============================================
+ Host Interrupt Mask Clear 16bit,(Write only)
+ ------------------------------------------
+ Setting a bit in this register clears
+ the corresponding bin in ACX_HINT_MASK register
+ without effecting the mask
+ state of other bits (0 = no effect).
+=============================================*/
+ ACX_REG_HINT_MASK_CLR,
+
+/*=============================================
+ Host Interrupt Status Nondestructive Read
+ 16bit,(Read only)
+ ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register doesn't
+ effect its content.
+=============================================*/
+ ACX_REG_INTERRUPT_NO_CLEAR,
+
+/*=============================================
+ Host Interrupt Status Clear on Read Register
+ 16bit,(Read only)
+ ------------------------------------------
+ The host can read this register to determine
+ which interrupts are active.
+ Reading this register clears it,
+ thus making all interrupts inactive.
+==============================================*/
+ ACX_REG_INTERRUPT_CLEAR,
+
+/*=============================================
+ Host Interrupt Acknowledge Register
+ 16bit,(Write only)
+ ------------------------------------------
+ The host can set individual bits in this
+ register to clear (acknowledge) the corresp.
+ interrupt status bits in the HINT_STS_CLR and
+ HINT_STS_ND registers, thus making the
+ assotiated interrupt inactive. (0-no effect)
+==============================================*/
+ ACX_REG_INTERRUPT_ACK,
+
+/*===============================================
+ Host Software Reset - 32bit RW
+ ------------------------------------------
+ [31:1] Reserved
+ 0 SOFT_RESET Soft Reset - When this bit is set,
+ it holds the Wlan hardware in a soft reset state.
+ This reset disables all MAC and baseband processor
+ clocks except the CardBus/PCI interface clock.
+ It also initializes all MAC state machines except
+ the host interface. It does not reload the
+ contents of the EEPROM. When this bit is cleared
+ (not self-clearing), the Wlan hardware
+ exits the software reset state.
+===============================================*/
+ ACX_REG_SLV_SOFT_RESET,
+
+/*===============================================
+ EEPROM Burst Read Start - 32bit RW
+ ------------------------------------------
+ [31:1] Reserved
+ 0 ACX_EE_START - EEPROM Burst Read Start 0
+ Setting this bit starts a burst read from
+ the external EEPROM.
+ If this bit is set (after reset) before an EEPROM read/write,
+ the burst read starts at EEPROM address 0.
+ Otherwise, it starts at the address
+ following the address of the previous access.
+ TheWlan hardware hardware clears this bit automatically.
+
+ Default: 0x00000000
+*================================================*/
+ ACX_REG_EE_START,
+
+/* Embedded ARM CPU Control */
+
+/*===============================================
+ Halt eCPU - 32bit RW
+ ------------------------------------------
+ 0 HALT_ECPU Halt Embedded CPU - This bit is the
+ compliment of bit 1 (MDATA2) in the SOR_CFG register.
+ During a hardware reset, this bit holds
+ the inverse of MDATA2.
+ When downloading firmware from the host,
+ set this bit (pull down MDATA2).
+ The host clears this bit after downloading the firmware into
+ zero-wait-state SSRAM.
+ When loading firmware from Flash, clear this bit (pull up MDATA2)
+ so that the eCPU can run the bootloader code in Flash
+ HALT_ECPU eCPU State
+ --------------------
+ 1 halt eCPU
+ 0 enable eCPU
+ ===============================================*/
+ ACX_REG_ECPU_CONTROL,
+
+ ACX_REG_TABLE_LEN
+};
+
+#define ACX_SLV_SOFT_RESET_BIT BIT(1)
+#define ACX_REG_EEPROM_START_BIT BIT(1)
+
+/* Command/Information Mailbox Pointers */
+
+/*===============================================
+ Command Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the command mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to
+ find the location of the command mailbox.
+ The Wlan hardware initializes the command mailbox
+ pointer with the default address of the command mailbox.
+ The command mailbox pointer is not valid until after
+ the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_COMMAND_MAILBOX_PTR (SCR_PAD0)
+
+/*===============================================
+ Information Mailbox Pointer - 32bit RW
+ ------------------------------------------
+ This register holds the start address of
+ the information mailbox located in the Wlan hardware memory.
+ The host must read this pointer after a reset to find
+ the location of the information mailbox.
+ The Wlan hardware initializes the information mailbox pointer
+ with the default address of the information mailbox.
+ The information mailbox pointer is not valid
+ until after the host receives the Init Complete interrupt from
+ the Wlan hardware.
+ ===============================================*/
+#define REG_EVENT_MAILBOX_PTR (SCR_PAD1)
+
+
+/* Misc */
+
+#define REG_ENABLE_TX_RX (ENABLE)
+/*
+ * Rx configuration (filter) information element
+ * ---------------------------------------------
+ */
+#define REG_RX_CONFIG (RX_CFG)
+#define REG_RX_FILTER (RX_FILTER_CFG)
+
+
+#define RX_CFG_ENABLE_PHY_HEADER_PLCP 0x0002
+
+/* promiscuous - receives all valid frames */
+#define RX_CFG_PROMISCUOUS 0x0008
+
+/* receives frames from any BSSID */
+#define RX_CFG_BSSID 0x0020
+
+/* receives frames destined to any MAC address */
+#define RX_CFG_MAC 0x0010
+
+#define RX_CFG_ENABLE_ONLY_MY_DEST_MAC 0x0010
+#define RX_CFG_ENABLE_ANY_DEST_MAC 0x0000
+#define RX_CFG_ENABLE_ONLY_MY_BSSID 0x0020
+#define RX_CFG_ENABLE_ANY_BSSID 0x0000
+
+/* discards all broadcast frames */
+#define RX_CFG_DISABLE_BCAST 0x0200
+
+#define RX_CFG_ENABLE_ONLY_MY_SSID 0x0400
+#define RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR 0x0800
+#define RX_CFG_COPY_RX_STATUS 0x2000
+#define RX_CFG_TSF 0x10000
+
+#define RX_CONFIG_OPTION_ANY_DST_MY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
+ RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_ANY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+ | RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_ANY_DST_ANY_BSS (RX_CFG_ENABLE_ANY_DEST_MAC | \
+ RX_CFG_ENABLE_ANY_BSSID)
+
+#define RX_CONFIG_OPTION_MY_DST_MY_BSS (RX_CFG_ENABLE_ONLY_MY_DEST_MAC\
+ | RX_CFG_ENABLE_ONLY_MY_BSSID)
+
+#define RX_CONFIG_OPTION_FOR_SCAN (RX_CFG_ENABLE_PHY_HEADER_PLCP \
+ | RX_CFG_ENABLE_RX_CMPLT_FCS_ERROR \
+ | RX_CFG_COPY_RX_STATUS | RX_CFG_TSF)
+
+#define RX_CONFIG_OPTION_FOR_MEASUREMENT (RX_CFG_ENABLE_ANY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_JOIN (RX_CFG_ENABLE_ONLY_MY_BSSID | \
+ RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_CONFIG_OPTION_FOR_IBSS_JOIN (RX_CFG_ENABLE_ONLY_MY_SSID | \
+ RX_CFG_ENABLE_ONLY_MY_DEST_MAC)
+
+#define RX_FILTER_OPTION_DEF (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+ | CFG_RX_CTL_EN | CFG_RX_BCN_EN\
+ | CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
+
+#define RX_FILTER_OPTION_FILTER_ALL 0
+
+#define RX_FILTER_OPTION_DEF_PRSP_BCN (CFG_RX_PRSP_EN | CFG_RX_MGMT_EN\
+ | CFG_RX_RCTS_ACK | CFG_RX_BCN_EN)
+
+#define RX_FILTER_OPTION_JOIN (CFG_RX_MGMT_EN | CFG_RX_DATA_EN\
+ | CFG_RX_BCN_EN | CFG_RX_AUTH_EN\
+ | CFG_RX_ASSOC_EN | CFG_RX_RCTS_ACK\
+ | CFG_RX_PRSP_EN)
+
+
+/*===============================================
+ Phy regs
+ ===============================================*/
+#define ACX_PHY_ADDR_REG SBB_ADDR
+#define ACX_PHY_DATA_REG SBB_DATA
+#define ACX_PHY_CTRL_REG SBB_CTL
+#define ACX_PHY_REG_WR_MASK 0x00000001ul
+#define ACX_PHY_REG_RD_MASK 0x00000002ul
+
+
+/*===============================================
+ EEPROM Read/Write Request 32bit RW
+ ------------------------------------------
+ 1 EE_READ - EEPROM Read Request 1 - Setting this bit
+ loads a single byte of data into the EE_DATA
+ register from the EEPROM location specified in
+ the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+ EE_DATA is valid when this bit is cleared.
+
+ 0 EE_WRITE - EEPROM Write Request - Setting this bit
+ writes a single byte of data from the EE_DATA register into the
+ EEPROM location specified in the EE_ADDR register.
+ The Wlan hardware hardware clears this bit automatically.
+*===============================================*/
+#define ACX_EE_CTL_REG EE_CTL
+#define EE_WRITE 0x00000001ul
+#define EE_READ 0x00000002ul
+
+/*===============================================
+ EEPROM Address - 32bit RW
+ ------------------------------------------
+ This register specifies the address
+ within the EEPROM from/to which to read/write data.
+ ===============================================*/
+#define ACX_EE_ADDR_REG EE_ADDR
+
+/*===============================================
+ EEPROM Data - 32bit RW
+ ------------------------------------------
+ This register either holds the read 8 bits of
+ data from the EEPROM or the write data
+ to be written to the EEPROM.
+ ===============================================*/
+#define ACX_EE_DATA_REG EE_DATA
+
+/*===============================================
+ EEPROM Base Address - 32bit RW
+ ------------------------------------------
+ This register holds the upper nine bits
+ [23:15] of the 24-bit Wlan hardware memory
+ address for burst reads from EEPROM accesses.
+ The EEPROM provides the lower 15 bits of this address.
+ The MSB of the address from the EEPROM is ignored.
+ ===============================================*/
+#define ACX_EE_CFG EE_CFG
+
+/*===============================================
+ GPIO Output Values -32bit, RW
+ ------------------------------------------
+ [31:16] Reserved
+ [15: 0] Specify the output values (at the output driver inputs) for
+ GPIO[15:0], respectively.
+ ===============================================*/
+#define ACX_GPIO_OUT_REG GPIO_OUT
+#define ACX_MAX_GPIO_LINES 15
+
+/*===============================================
+ Contention window -32bit, RW
+ ------------------------------------------
+ [31:26] Reserved
+ [25:16] Max (0x3ff)
+ [15:07] Reserved
+ [06:00] Current contention window value - default is 0x1F
+ ===============================================*/
+#define ACX_CONT_WIND_CFG_REG CONT_WIND_CFG
+#define ACX_CONT_WIND_MIN_MASK 0x0000007f
+#define ACX_CONT_WIND_MAX 0x03ff0000
+
+/*
+ * Indirect slave register/memory registers
+ * ----------------------------------------
+ */
+#define HW_SLAVE_REG_ADDR_REG 0x00000004
+#define HW_SLAVE_REG_DATA_REG 0x00000008
+#define HW_SLAVE_REG_CTRL_REG 0x0000000c
+
+#define SLAVE_AUTO_INC 0x00010000
+#define SLAVE_NO_AUTO_INC 0x00000000
+#define SLAVE_HOST_LITTLE_ENDIAN 0x00000000
+
+#define HW_SLAVE_MEM_ADDR_REG SLV_MEM_ADDR
+#define HW_SLAVE_MEM_DATA_REG SLV_MEM_DATA
+#define HW_SLAVE_MEM_CTRL_REG SLV_MEM_CTL
+#define HW_SLAVE_MEM_ENDIAN_REG SLV_END_CTL
+
+#define HW_FUNC_EVENT_INT_EN 0x8000
+#define HW_FUNC_EVENT_MASK_REG 0x00000034
+
+#define ACX_MAC_TIMESTAMP_REG (MAC_TIMESTAMP)
+
+/*===============================================
+ HI_CFG Interface Configuration Register Values
+ ------------------------------------------
+ ===============================================*/
+#define HI_CFG_UART_ENABLE 0x00000004
+#define HI_CFG_RST232_ENABLE 0x00000008
+#define HI_CFG_CLOCK_REQ_SELECT 0x00000010
+#define HI_CFG_HOST_INT_ENABLE 0x00000020
+#define HI_CFG_VLYNQ_OUTPUT_ENABLE 0x00000040
+#define HI_CFG_HOST_INT_ACTIVE_LOW 0x00000080
+#define HI_CFG_UART_TX_OUT_GPIO_15 0x00000100
+#define HI_CFG_UART_TX_OUT_GPIO_14 0x00000200
+#define HI_CFG_UART_TX_OUT_GPIO_7 0x00000400
+
+/*
+ * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile
+ * for platforms using active high interrupt level
+ */
+#ifdef USE_ACTIVE_HIGH
+#define HI_CFG_DEF_VAL \
+ (HI_CFG_UART_ENABLE | \
+ HI_CFG_RST232_ENABLE | \
+ HI_CFG_CLOCK_REQ_SELECT | \
+ HI_CFG_HOST_INT_ENABLE)
+#else
+#define HI_CFG_DEF_VAL \
+ (HI_CFG_UART_ENABLE | \
+ HI_CFG_RST232_ENABLE | \
+ HI_CFG_CLOCK_REQ_SELECT | \
+ HI_CFG_HOST_INT_ENABLE)
+
+#endif
+
+#define REF_FREQ_19_2 0
+#define REF_FREQ_26_0 1
+#define REF_FREQ_38_4 2
+#define REF_FREQ_40_0 3
+#define REF_FREQ_33_6 4
+#define REF_FREQ_NUM 5
+
+#define LUT_PARAM_INTEGER_DIVIDER 0
+#define LUT_PARAM_FRACTIONAL_DIVIDER 1
+#define LUT_PARAM_ATTN_BB 2
+#define LUT_PARAM_ALPHA_BB 3
+#define LUT_PARAM_STOP_TIME_BB 4
+#define LUT_PARAM_BB_PLL_LOOP_FILTER 5
+#define LUT_PARAM_NUM 6
+
+#define ACX_EEPROMLESS_IND_REG (SCR_PAD4)
+#define USE_EEPROM 0
+#define SOFT_RESET_MAX_TIME 1000000
+#define SOFT_RESET_STALL_TIME 1000
+#define NVS_DATA_BUNDARY_ALIGNMENT 4
+
+
+/* Firmware image load chunk size */
+#define CHUNK_SIZE 512
+
+/* Firmware image header size */
+#define FW_HDR_SIZE 8
+
+#define ECPU_CONTROL_HALT 0x00000101
+
+
+/******************************************************************************
+
+ CHANNELS, BAND & REG DOMAINS definitions
+
+******************************************************************************/
+
+
+enum {
+ RADIO_BAND_2_4GHZ = 0, /* 2.4 Ghz band */
+ RADIO_BAND_5GHZ = 1, /* 5 Ghz band */
+ RADIO_BAND_JAPAN_4_9_GHZ = 2,
+ DEFAULT_BAND = RADIO_BAND_2_4GHZ,
+ INVALID_BAND = 0xFE,
+ MAX_RADIO_BANDS = 0xFF
+};
+
+enum {
+ NO_RATE = 0,
+ RATE_1MBPS = 0x0A,
+ RATE_2MBPS = 0x14,
+ RATE_5_5MBPS = 0x37,
+ RATE_6MBPS = 0x0B,
+ RATE_9MBPS = 0x0F,
+ RATE_11MBPS = 0x6E,
+ RATE_12MBPS = 0x0A,
+ RATE_18MBPS = 0x0E,
+ RATE_22MBPS = 0xDC,
+ RATE_24MBPS = 0x09,
+ RATE_36MBPS = 0x0D,
+ RATE_48MBPS = 0x08,
+ RATE_54MBPS = 0x0C
+};
+
+enum {
+ RATE_INDEX_1MBPS = 0,
+ RATE_INDEX_2MBPS = 1,
+ RATE_INDEX_5_5MBPS = 2,
+ RATE_INDEX_6MBPS = 3,
+ RATE_INDEX_9MBPS = 4,
+ RATE_INDEX_11MBPS = 5,
+ RATE_INDEX_12MBPS = 6,
+ RATE_INDEX_18MBPS = 7,
+ RATE_INDEX_22MBPS = 8,
+ RATE_INDEX_24MBPS = 9,
+ RATE_INDEX_36MBPS = 10,
+ RATE_INDEX_48MBPS = 11,
+ RATE_INDEX_54MBPS = 12,
+ RATE_INDEX_MAX = RATE_INDEX_54MBPS,
+ MAX_RATE_INDEX,
+ INVALID_RATE_INDEX = MAX_RATE_INDEX,
+ RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF
+};
+
+enum {
+ RATE_MASK_1MBPS = 0x1,
+ RATE_MASK_2MBPS = 0x2,
+ RATE_MASK_5_5MBPS = 0x4,
+ RATE_MASK_11MBPS = 0x20,
+};
+
+#define SHORT_PREAMBLE_BIT BIT(0) /* CCK or Barker depending on the rate */
+#define OFDM_RATE_BIT BIT(6)
+#define PBCC_RATE_BIT BIT(7)
+
+enum {
+ CCK_LONG = 0,
+ CCK_SHORT = SHORT_PREAMBLE_BIT,
+ PBCC_LONG = PBCC_RATE_BIT,
+ PBCC_SHORT = PBCC_RATE_BIT | SHORT_PREAMBLE_BIT,
+ OFDM = OFDM_RATE_BIT
+};
+
+/******************************************************************************
+
+Transmit-Descriptor RATE-SET field definitions...
+
+Define a new "Rate-Set" for TX path that incorporates the
+Rate & Modulation info into a single 16-bit field.
+
+TxdRateSet_t:
+b15 - Indicates Preamble type (1=SHORT, 0=LONG).
+ Notes:
+ Must be LONG (0) for 1Mbps rate.
+ Does not apply (set to 0) for RevG-OFDM rates.
+b14 - Indicates PBCC encoding (1=PBCC, 0=not).
+ Notes:
+ Does not apply (set to 0) for rates 1 and 2 Mbps.
+ Does not apply (set to 0) for RevG-OFDM rates.
+b13 - Unused (set to 0).
+b12-b0 - Supported Rate indicator bits as defined below.
+
+******************************************************************************/
+
+
+#define TNETW1251_CHIP_ID_PG1_0 0x07010101
+#define TNETW1251_CHIP_ID_PG1_1 0x07020101
+#define TNETW1251_CHIP_ID_PG1_2 0x07030101
+
+/*************************************************************************
+
+ Interrupt Trigger Register (Host -> WiLink)
+
+**************************************************************************/
+
+/* Hardware to Embedded CPU Interrupts - first 32-bit register set */
+
+/*
+ * Host Command Interrupt. Setting this bit masks
+ * the interrupt that the host issues to inform
+ * the FW that it has sent a command
+ * to the Wlan hardware Command Mailbox.
+ */
+#define INTR_TRIG_CMD BIT(0)
+
+/*
+ * Host Event Acknowlegde Interrupt. The host
+ * sets this bit to acknowledge that it received
+ * the unsolicited information from the event
+ * mailbox.
+ */
+#define INTR_TRIG_EVENT_ACK BIT(1)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * FW that a TX packet is in the XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_TX_PROC0 BIT(2)
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #0.
+ */
+#define INTR_TRIG_RX_PROC0 BIT(3)
+
+#define INTR_TRIG_DEBUG_ACK BIT(4)
+
+#define INTR_TRIG_STATE_CHANGED BIT(5)
+
+
+/* Hardware to Embedded CPU Interrupts - second 32-bit register set */
+
+/*
+ * The host sets this bit to inform the FW
+ * that it read a packet from RX XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_RX_PROC1 BIT(17)
+
+/*
+ * The host sets this bit to inform the Wlan
+ * hardware that a TX packet is in the XFER
+ * Buffer #1.
+ */
+#define INTR_TRIG_TX_PROC1 BIT(18)
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/rx.c b/drivers/net/wireless/wl12xx/rx.c
new file mode 100644
index 00000000000..981ea259eb8
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -0,0 +1,208 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/skbuff.h>
+#include <net/mac80211.h>
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "rx.h"
+
+static void wl12xx_rx_header(struct wl12xx *wl,
+ struct wl12xx_rx_descriptor *desc)
+{
+ u32 rx_packet_ring_addr;
+
+ rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr;
+ if (wl->rx_current_buffer)
+ rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+ wl12xx_spi_mem_read(wl, rx_packet_ring_addr, desc,
+ sizeof(struct wl12xx_rx_descriptor));
+}
+
+static void wl12xx_rx_status(struct wl12xx *wl,
+ struct wl12xx_rx_descriptor *desc,
+ struct ieee80211_rx_status *status,
+ u8 beacon)
+{
+ memset(status, 0, sizeof(struct ieee80211_rx_status));
+
+ status->band = IEEE80211_BAND_2GHZ;
+ status->mactime = desc->timestamp;
+
+ /*
+ * The rx status timestamp is a 32 bits value while the TSF is a
+ * 64 bits one.
+ * For IBSS merging, TSF is mandatory, so we have to get it
+ * somehow, so we ask for ACX_TSF_INFO.
+ * That could be moved to the get_tsf() hook, but unfortunately,
+ * this one must be atomic, while our SPI routines can sleep.
+ */
+ if ((wl->bss_type == BSS_TYPE_IBSS) && beacon) {
+ u64 mactime;
+ int ret;
+ struct wl12xx_command cmd;
+ struct acx_tsf_info *tsf_info;
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ ret = wl12xx_cmd_interrogate(wl, ACX_TSF_INFO,
+ sizeof(struct acx_tsf_info),
+ &cmd);
+ if (ret < 0) {
+ wl12xx_warning("ACX_FW_REV interrogate failed");
+ return;
+ }
+
+ tsf_info = (struct acx_tsf_info *)&(cmd.parameters);
+
+ mactime = tsf_info->current_tsf_lsb |
+ (tsf_info->current_tsf_msb << 31);
+
+ status->mactime = mactime;
+ }
+
+ status->signal = desc->rssi;
+ status->qual = (desc->rssi - WL12XX_RX_MIN_RSSI) * 100 /
+ (WL12XX_RX_MAX_RSSI - WL12XX_RX_MIN_RSSI);
+ status->qual = min(status->qual, 100);
+ status->qual = max(status->qual, 0);
+
+ /*
+ * FIXME: guessing that snr needs to be divided by two, otherwise
+ * the values don't make any sense
+ */
+ status->noise = desc->rssi - desc->snr / 2;
+
+ status->freq = ieee80211_channel_to_frequency(desc->channel);
+
+ status->flag |= RX_FLAG_TSFT;
+
+ if (desc->flags & RX_DESC_ENCRYPTION_MASK) {
+ status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+
+ if (likely(!(desc->flags & RX_DESC_DECRYPT_FAIL)))
+ status->flag |= RX_FLAG_DECRYPTED;
+
+ if (unlikely(desc->flags & RX_DESC_MIC_FAIL))
+ status->flag |= RX_FLAG_MMIC_ERROR;
+ }
+
+ if (unlikely(!(desc->flags & RX_DESC_VALID_FCS)))
+ status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+
+ /* FIXME: set status->rate_idx */
+}
+
+static void wl12xx_rx_body(struct wl12xx *wl,
+ struct wl12xx_rx_descriptor *desc)
+{
+ struct sk_buff *skb;
+ struct ieee80211_rx_status status;
+ u8 *rx_buffer, beacon = 0;
+ u16 length, *fc;
+ u32 curr_id, last_id_inc, rx_packet_ring_addr;
+
+ length = WL12XX_RX_ALIGN(desc->length - PLCP_HEADER_LENGTH);
+ curr_id = (desc->flags & RX_DESC_SEQNUM_MASK) >> RX_DESC_PACKETID_SHIFT;
+ last_id_inc = (wl->rx_last_id + 1) % (RX_MAX_PACKET_ID + 1);
+
+ if (last_id_inc != curr_id) {
+ wl12xx_warning("curr ID:%d, last ID inc:%d",
+ curr_id, last_id_inc);
+ wl->rx_last_id = curr_id;
+ } else {
+ wl->rx_last_id = last_id_inc;
+ }
+
+ rx_packet_ring_addr = wl->data_path->rx_packet_ring_addr +
+ sizeof(struct wl12xx_rx_descriptor) + 20;
+ if (wl->rx_current_buffer)
+ rx_packet_ring_addr += wl->data_path->rx_packet_ring_chunk_size;
+
+ skb = dev_alloc_skb(length);
+ if (!skb) {
+ wl12xx_error("Couldn't allocate RX frame");
+ return;
+ }
+
+ rx_buffer = skb_put(skb, length);
+ wl12xx_spi_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);
+
+ /* The actual lenght doesn't include the target's alignment */
+ skb->len = desc->length - PLCP_HEADER_LENGTH;
+
+ fc = (u16 *)skb->data;
+
+ if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
+ beacon = 1;
+
+ wl12xx_rx_status(wl, desc, &status, beacon);
+
+ wl12xx_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
+ beacon ? "beacon" : "");
+
+ ieee80211_rx(wl->hw, skb, &status);
+}
+
+static void wl12xx_rx_ack(struct wl12xx *wl)
+{
+ u32 data, addr;
+
+ if (wl->rx_current_buffer) {
+ addr = ACX_REG_INTERRUPT_TRIG_H;
+ data = INTR_TRIG_RX_PROC1;
+ } else {
+ addr = ACX_REG_INTERRUPT_TRIG;
+ data = INTR_TRIG_RX_PROC0;
+ }
+
+ wl12xx_reg_write32(wl, addr, data);
+
+ /* Toggle buffer ring */
+ wl->rx_current_buffer = !wl->rx_current_buffer;
+}
+
+
+void wl12xx_rx(struct wl12xx *wl)
+{
+ struct wl12xx_rx_descriptor rx_desc;
+
+ if (wl->state != WL12XX_STATE_ON)
+ return;
+
+ /* We first read the frame's header */
+ wl12xx_rx_header(wl, &rx_desc);
+
+ /* Now we can read the body */
+ wl12xx_rx_body(wl, &rx_desc);
+
+ /* Finally, we need to ACK the RX */
+ wl12xx_rx_ack(wl);
+
+ return;
+}
diff --git a/drivers/net/wireless/wl12xx/rx.h b/drivers/net/wireless/wl12xx/rx.h
new file mode 100644
index 00000000000..8a23fdea501
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/rx.h
@@ -0,0 +1,122 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_RX_H__
+#define __WL12XX_RX_H__
+
+#include <linux/bitops.h>
+
+/*
+ * RX PATH
+ *
+ * The Rx path uses a double buffer and an rx_contro structure, each located
+ * at a fixed address in the device memory. The host keeps track of which
+ * buffer is available and alternates between them on a per packet basis.
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet.
+ * The RX path goes like that:
+ * 1) The target generates an interrupt each time a new packet is received.
+ * There are 2 RX interrupts, one for each buffer.
+ * 2) The host reads the received packet from one of the double buffers.
+ * 3) The host triggers a target interrupt.
+ * 4) The target prepares the next RX packet.
+ */
+
+#define WL12XX_RX_MAX_RSSI -30
+#define WL12XX_RX_MIN_RSSI -95
+
+#define WL12XX_RX_ALIGN_TO 4
+#define WL12XX_RX_ALIGN(len) (((len) + WL12XX_RX_ALIGN_TO - 1) & \
+ ~(WL12XX_RX_ALIGN_TO - 1))
+
+#define SHORT_PREAMBLE_BIT BIT(0)
+#define OFDM_RATE_BIT BIT(6)
+#define PBCC_RATE_BIT BIT(7)
+
+#define PLCP_HEADER_LENGTH 8
+#define RX_DESC_PACKETID_SHIFT 11
+#define RX_MAX_PACKET_ID 3
+
+#define RX_DESC_VALID_FCS 0x0001
+#define RX_DESC_MATCH_RXADDR1 0x0002
+#define RX_DESC_MCAST 0x0004
+#define RX_DESC_STAINTIM 0x0008
+#define RX_DESC_VIRTUAL_BM 0x0010
+#define RX_DESC_BCAST 0x0020
+#define RX_DESC_MATCH_SSID 0x0040
+#define RX_DESC_MATCH_BSSID 0x0080
+#define RX_DESC_ENCRYPTION_MASK 0x0300
+#define RX_DESC_MEASURMENT 0x0400
+#define RX_DESC_SEQNUM_MASK 0x1800
+#define RX_DESC_MIC_FAIL 0x2000
+#define RX_DESC_DECRYPT_FAIL 0x4000
+
+struct wl12xx_rx_descriptor {
+ u32 timestamp; /* In microseconds */
+ u16 length; /* Paylod length, including headers */
+ u16 flags;
+
+ /*
+ * 0 - 802.11
+ * 1 - 802.3
+ * 2 - IP
+ * 3 - Raw Codec
+ */
+ u8 type;
+
+ /*
+ * Recevied Rate:
+ * 0x0A - 1MBPS
+ * 0x14 - 2MBPS
+ * 0x37 - 5_5MBPS
+ * 0x0B - 6MBPS
+ * 0x0F - 9MBPS
+ * 0x6E - 11MBPS
+ * 0x0A - 12MBPS
+ * 0x0E - 18MBPS
+ * 0xDC - 22MBPS
+ * 0x09 - 24MBPS
+ * 0x0D - 36MBPS
+ * 0x08 - 48MBPS
+ * 0x0C - 54MBPS
+ */
+ u8 rate;
+
+ u8 mod_pre; /* Modulation and preamble */
+ u8 channel;
+
+ /*
+ * 0 - 2.4 Ghz
+ * 1 - 5 Ghz
+ */
+ u8 band;
+
+ s8 rssi; /* in dB */
+ u8 rcpi; /* in dB */
+ u8 snr; /* in dB */
+} __attribute__ ((packed));
+
+void wl12xx_rx(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/spi.c b/drivers/net/wireless/wl12xx/spi.c
new file mode 100644
index 00000000000..abdf171a47e
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -0,0 +1,358 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+
+#include "wl12xx.h"
+#include "wl12xx_80211.h"
+#include "reg.h"
+#include "spi.h"
+#include "ps.h"
+
+static int wl12xx_translate_reg_addr(struct wl12xx *wl, int addr)
+{
+ /* If the address is lower than REGISTERS_BASE, it means that this is
+ * a chip-specific register address, so look it up in the registers
+ * table */
+ if (addr < REGISTERS_BASE) {
+ /* Make sure we don't go over the table */
+ if (addr >= ACX_REG_TABLE_LEN) {
+ wl12xx_error("address out of range (%d)", addr);
+ return -EINVAL;
+ }
+ addr = wl->chip.acx_reg_table[addr];
+ }
+
+ return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
+}
+
+static int wl12xx_translate_mem_addr(struct wl12xx *wl, int addr)
+{
+ return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
+}
+
+
+void wl12xx_spi_reset(struct wl12xx *wl)
+{
+ u8 *cmd;
+ struct spi_transfer t;
+ struct spi_message m;
+
+ cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+ if (!cmd) {
+ wl12xx_error("could not allocate cmd for spi reset");
+ return;
+ }
+
+ memset(&t, 0, sizeof(t));
+ spi_message_init(&m);
+
+ memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
+
+ t.tx_buf = cmd;
+ t.len = WSPI_INIT_CMD_LEN;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl->spi, &m);
+
+ wl12xx_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+void wl12xx_spi_init(struct wl12xx *wl)
+{
+ u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
+ struct spi_transfer t;
+ struct spi_message m;
+
+ cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+ if (!cmd) {
+ wl12xx_error("could not allocate cmd for spi init");
+ return;
+ }
+
+ memset(crc, 0, sizeof(crc));
+ memset(&t, 0, sizeof(t));
+ spi_message_init(&m);
+
+ /*
+ * Set WSPI_INIT_COMMAND
+ * the data is being send from the MSB to LSB
+ */
+ cmd[2] = 0xff;
+ cmd[3] = 0xff;
+ cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
+ cmd[0] = 0;
+ cmd[7] = 0;
+ cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
+ cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
+
+ if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
+ cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
+ else
+ cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
+
+ cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
+ | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
+
+ crc[0] = cmd[1];
+ crc[1] = cmd[0];
+ crc[2] = cmd[7];
+ crc[3] = cmd[6];
+ crc[4] = cmd[5];
+
+ cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
+ cmd[4] |= WSPI_INIT_CMD_END;
+
+ t.tx_buf = cmd;
+ t.len = WSPI_INIT_CMD_LEN;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl->spi, &m);
+
+ wl12xx_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+}
+
+/* Set the SPI partitions to access the chip addresses
+ *
+ * There are two VIRTUAL (SPI) partitions (the memory partition and the
+ * registers partition), which are mapped to two different areas of the
+ * PHYSICAL (hardware) memory. This function also makes other checks to
+ * ensure that the partitions are not overlapping. In the diagram below, the
+ * memory partition comes before the register partition, but the opposite is
+ * also supported.
+ *
+ * PHYSICAL address
+ * space
+ *
+ * | |
+ * ...+----+--> mem_start
+ * VIRTUAL address ... | |
+ * space ... | | [PART_0]
+ * ... | |
+ * 0x00000000 <--+----+... ...+----+--> mem_start + mem_size
+ * | | ... | |
+ * |MEM | ... | |
+ * | | ... | |
+ * part_size <--+----+... | | {unused area)
+ * | | ... | |
+ * |REG | ... | |
+ * part_size | | ... | |
+ * + <--+----+... ...+----+--> reg_start
+ * reg_size ... | |
+ * ... | | [PART_1]
+ * ... | |
+ * ...+----+--> reg_start + reg_size
+ * | |
+ *
+ */
+void wl12xx_set_partition(struct wl12xx *wl,
+ u32 mem_start, u32 mem_size,
+ u32 reg_start, u32 reg_size)
+{
+ u8 tx_buf[sizeof(u32) + 2 * sizeof(struct wl12xx_partition)];
+ struct wl12xx_partition *partition;
+ struct spi_transfer t;
+ struct spi_message m;
+ u32 *cmd;
+ size_t len;
+ int addr;
+
+ spi_message_init(&m);
+ memset(&t, 0, sizeof(t));
+ memset(tx_buf, 0, sizeof(tx_buf));
+
+ cmd = (u32 *) tx_buf;
+ partition = (struct wl12xx_partition *) (tx_buf + sizeof(u32));
+ addr = HW_ACCESS_PART0_SIZE_ADDR;
+ len = 2 * sizeof(struct wl12xx_partition);
+
+ *cmd |= WSPI_CMD_WRITE;
+ *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ *cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+
+ /* Make sure that the two partitions together don't exceed the
+ * address range */
+ if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
+ wl12xx_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
+ " address range. Truncating partition[0].");
+ mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
+ wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ }
+
+ if ((mem_start < reg_start) &&
+ ((mem_start + mem_size) > reg_start)) {
+ /* Guarantee that the memory partition doesn't overlap the
+ * registers partition */
+ wl12xx_debug(DEBUG_SPI, "End of partition[0] is "
+ "overlapping partition[1]. Adjusted.");
+ mem_size = reg_start - mem_start;
+ wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ } else if ((reg_start < mem_start) &&
+ ((reg_start + reg_size) > mem_start)) {
+ /* Guarantee that the register partition doesn't overlap the
+ * memory partition */
+ wl12xx_debug(DEBUG_SPI, "End of partition[1] is"
+ " overlapping partition[0]. Adjusted.");
+ reg_size = mem_start - reg_start;
+ wl12xx_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
+ mem_start, mem_size);
+ wl12xx_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
+ reg_start, reg_size);
+ }
+
+ partition[0].start = mem_start;
+ partition[0].size = mem_size;
+ partition[1].start = reg_start;
+ partition[1].size = reg_size;
+
+ wl->physical_mem_addr = mem_start;
+ wl->physical_reg_addr = reg_start;
+
+ wl->virtual_mem_addr = 0;
+ wl->virtual_reg_addr = mem_size;
+
+ t.tx_buf = tx_buf;
+ t.len = sizeof(tx_buf);
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl->spi, &m);
+}
+
+void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf,
+ size_t len)
+{
+ struct spi_transfer t[3];
+ struct spi_message m;
+ char busy_buf[TNETWIF_READ_OFFSET_BYTES];
+ u32 cmd;
+
+ cmd = 0;
+ cmd |= WSPI_CMD_READ;
+ cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = &cmd;
+ t[0].len = 4;
+ spi_message_add_tail(&t[0], &m);
+
+ /* Busy and non busy words read */
+ t[1].rx_buf = busy_buf;
+ t[1].len = TNETWIF_READ_OFFSET_BYTES;
+ spi_message_add_tail(&t[1], &m);
+
+ t[2].rx_buf = buf;
+ t[2].len = len;
+ spi_message_add_tail(&t[2], &m);
+
+ spi_sync(wl->spi, &m);
+
+ /* FIXME: check busy words */
+
+ wl12xx_dump(DEBUG_SPI, "spi_read cmd -> ", &cmd, sizeof(cmd));
+ wl12xx_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
+}
+
+void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf,
+ size_t len)
+{
+ struct spi_transfer t[2];
+ struct spi_message m;
+ u32 cmd;
+
+ cmd = 0;
+ cmd |= WSPI_CMD_WRITE;
+ cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = &cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(wl->spi, &m);
+
+ wl12xx_dump(DEBUG_SPI, "spi_write cmd -> ", &cmd, sizeof(cmd));
+ wl12xx_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
+}
+
+void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf,
+ size_t len)
+{
+ int physical;
+
+ physical = wl12xx_translate_mem_addr(wl, addr);
+
+ wl12xx_spi_read(wl, physical, buf, len);
+}
+
+void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf,
+ size_t len)
+{
+ int physical;
+
+ physical = wl12xx_translate_mem_addr(wl, addr);
+
+ wl12xx_spi_write(wl, physical, buf, len);
+}
+
+u32 wl12xx_mem_read32(struct wl12xx *wl, int addr)
+{
+ return wl12xx_read32(wl, wl12xx_translate_mem_addr(wl, addr));
+}
+
+void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val)
+{
+ wl12xx_write32(wl, wl12xx_translate_mem_addr(wl, addr), val);
+}
+
+u32 wl12xx_reg_read32(struct wl12xx *wl, int addr)
+{
+ return wl12xx_read32(wl, wl12xx_translate_reg_addr(wl, addr));
+}
+
+void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val)
+{
+ wl12xx_write32(wl, wl12xx_translate_reg_addr(wl, addr), val);
+}
diff --git a/drivers/net/wireless/wl12xx/spi.h b/drivers/net/wireless/wl12xx/spi.h
new file mode 100644
index 00000000000..fd3227e904a
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/spi.h
@@ -0,0 +1,109 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_SPI_H__
+#define __WL12XX_SPI_H__
+
+#include "cmd.h"
+#include "acx.h"
+#include "reg.h"
+
+#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0
+
+#define HW_ACCESS_PART0_SIZE_ADDR 0x1FFC0
+#define HW_ACCESS_PART0_START_ADDR 0x1FFC4
+#define HW_ACCESS_PART1_SIZE_ADDR 0x1FFC8
+#define HW_ACCESS_PART1_START_ADDR 0x1FFCC
+
+#define HW_ACCESS_REGISTER_SIZE 4
+
+#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000
+
+#define WSPI_CMD_READ 0x40000000
+#define WSPI_CMD_WRITE 0x00000000
+#define WSPI_CMD_FIXED 0x20000000
+#define WSPI_CMD_BYTE_LENGTH 0x1FFE0000
+#define WSPI_CMD_BYTE_LENGTH_OFFSET 17
+#define WSPI_CMD_BYTE_ADDR 0x0001FFFF
+
+#define WSPI_INIT_CMD_CRC_LEN 5
+
+#define WSPI_INIT_CMD_START 0x00
+#define WSPI_INIT_CMD_TX 0x40
+/* the extra bypass bit is sampled by the TNET as '1' */
+#define WSPI_INIT_CMD_BYPASS_BIT 0x80
+#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
+#define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80
+#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
+#define WSPI_INIT_CMD_IOD 0x40
+#define WSPI_INIT_CMD_IP 0x20
+#define WSPI_INIT_CMD_CS 0x10
+#define WSPI_INIT_CMD_WS 0x08
+#define WSPI_INIT_CMD_WSPI 0x01
+#define WSPI_INIT_CMD_END 0x01
+
+#define WSPI_INIT_CMD_LEN 8
+
+#define TNETWIF_READ_OFFSET_BYTES 8
+#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
+ ((TNETWIF_READ_OFFSET_BYTES - 4) / sizeof(u32))
+#define HW_ACCESS_WSPI_INIT_CMD_MASK 0
+
+
+/* Raw target IO, address is not translated */
+void wl12xx_spi_read(struct wl12xx *wl, int addr, void *buf, size_t len);
+void wl12xx_spi_write(struct wl12xx *wl, int addr, void *buf, size_t len);
+
+/* Memory target IO, address is tranlated to partition 0 */
+void wl12xx_spi_mem_read(struct wl12xx *wl, int addr, void *buf, size_t len);
+void wl12xx_spi_mem_write(struct wl12xx *wl, int addr, void *buf, size_t len);
+u32 wl12xx_mem_read32(struct wl12xx *wl, int addr);
+void wl12xx_mem_write32(struct wl12xx *wl, int addr, u32 val);
+
+/* Registers IO */
+u32 wl12xx_reg_read32(struct wl12xx *wl, int addr);
+void wl12xx_reg_write32(struct wl12xx *wl, int addr, u32 val);
+
+/* INIT and RESET words */
+void wl12xx_spi_reset(struct wl12xx *wl);
+void wl12xx_spi_init(struct wl12xx *wl);
+void wl12xx_set_partition(struct wl12xx *wl,
+ u32 part_start, u32 part_size,
+ u32 reg_start, u32 reg_size);
+
+static inline u32 wl12xx_read32(struct wl12xx *wl, int addr)
+{
+ u32 response;
+
+ wl12xx_spi_read(wl, addr, &response, sizeof(u32));
+
+ return response;
+}
+
+static inline void wl12xx_write32(struct wl12xx *wl, int addr, u32 val)
+{
+ wl12xx_spi_write(wl, addr, &val, sizeof(u32));
+}
+
+#endif /* __WL12XX_SPI_H__ */
diff --git a/drivers/net/wireless/wl12xx/tx.c b/drivers/net/wireless/wl12xx/tx.c
new file mode 100644
index 00000000000..62145e205a8
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -0,0 +1,557 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl12xx.h"
+#include "reg.h"
+#include "spi.h"
+#include "tx.h"
+#include "ps.h"
+
+static bool wl12xx_tx_double_buffer_busy(struct wl12xx *wl, u32 data_out_count)
+{
+ int used, data_in_count;
+
+ data_in_count = wl->data_in_count;
+
+ if (data_in_count < data_out_count)
+ /* data_in_count has wrapped */
+ data_in_count += TX_STATUS_DATA_OUT_COUNT_MASK + 1;
+
+ used = data_in_count - data_out_count;
+
+ WARN_ON(used < 0);
+ WARN_ON(used > DP_TX_PACKET_RING_CHUNK_NUM);
+
+ if (used >= DP_TX_PACKET_RING_CHUNK_NUM)
+ return true;
+ else
+ return false;
+}
+
+static int wl12xx_tx_path_status(struct wl12xx *wl)
+{
+ u32 status, addr, data_out_count;
+ bool busy;
+
+ addr = wl->data_path->tx_control_addr;
+ status = wl12xx_mem_read32(wl, addr);
+ data_out_count = status & TX_STATUS_DATA_OUT_COUNT_MASK;
+ busy = wl12xx_tx_double_buffer_busy(wl, data_out_count);
+
+ if (busy)
+ return -EBUSY;
+
+ return 0;
+}
+
+static int wl12xx_tx_id(struct wl12xx *wl, struct sk_buff *skb)
+{
+ int i;
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ if (wl->tx_frames[i] == NULL) {
+ wl->tx_frames[i] = skb;
+ return i;
+ }
+
+ return -EBUSY;
+}
+
+static void wl12xx_tx_control(struct tx_double_buffer_desc *tx_hdr,
+ struct ieee80211_tx_info *control, u16 fc)
+{
+ *(u16 *)&tx_hdr->control = 0;
+
+ tx_hdr->control.rate_policy = 0;
+
+ /* 802.11 packets */
+ tx_hdr->control.packet_type = 0;
+
+ if (control->flags & IEEE80211_TX_CTL_NO_ACK)
+ tx_hdr->control.ack_policy = 1;
+
+ tx_hdr->control.tx_complete = 1;
+
+ if ((fc & IEEE80211_FTYPE_DATA) &&
+ ((fc & IEEE80211_STYPE_QOS_DATA) ||
+ (fc & IEEE80211_STYPE_QOS_NULLFUNC)))
+ tx_hdr->control.qos = 1;
+}
+
+/* RSN + MIC = 8 + 8 = 16 bytes (worst case - AES). */
+#define MAX_MSDU_SECURITY_LENGTH 16
+#define MAX_MPDU_SECURITY_LENGTH 16
+#define WLAN_QOS_HDR_LEN 26
+#define MAX_MPDU_HEADER_AND_SECURITY (MAX_MPDU_SECURITY_LENGTH + \
+ WLAN_QOS_HDR_LEN)
+#define HW_BLOCK_SIZE 252
+static void wl12xx_tx_frag_block_num(struct tx_double_buffer_desc *tx_hdr)
+{
+ u16 payload_len, frag_threshold, mem_blocks;
+ u16 num_mpdus, mem_blocks_per_frag;
+
+ frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+ tx_hdr->frag_threshold = cpu_to_le16(frag_threshold);
+
+ payload_len = tx_hdr->length + MAX_MSDU_SECURITY_LENGTH;
+
+ if (payload_len > frag_threshold) {
+ mem_blocks_per_frag =
+ ((frag_threshold + MAX_MPDU_HEADER_AND_SECURITY) /
+ HW_BLOCK_SIZE) + 1;
+ num_mpdus = payload_len / frag_threshold;
+ mem_blocks = num_mpdus * mem_blocks_per_frag;
+ payload_len -= num_mpdus * frag_threshold;
+ num_mpdus++;
+
+ } else {
+ mem_blocks_per_frag = 0;
+ mem_blocks = 0;
+ num_mpdus = 1;
+ }
+
+ mem_blocks += (payload_len / HW_BLOCK_SIZE) + 1;
+
+ if (num_mpdus > 1)
+ mem_blocks += min(num_mpdus, mem_blocks_per_frag);
+
+ tx_hdr->num_mem_blocks = mem_blocks;
+}
+
+static int wl12xx_tx_fill_hdr(struct wl12xx *wl, struct sk_buff *skb,
+ struct ieee80211_tx_info *control)
+{
+ struct tx_double_buffer_desc *tx_hdr;
+ struct ieee80211_rate *rate;
+ int id;
+ u16 fc;
+
+ if (!skb)
+ return -EINVAL;
+
+ id = wl12xx_tx_id(wl, skb);
+ if (id < 0)
+ return id;
+
+ fc = *(u16 *)skb->data;
+ tx_hdr = (struct tx_double_buffer_desc *) skb_push(skb,
+ sizeof(*tx_hdr));
+
+ tx_hdr->length = cpu_to_le16(skb->len - sizeof(*tx_hdr));
+ rate = ieee80211_get_tx_rate(wl->hw, control);
+ tx_hdr->rate = cpu_to_le16(rate->hw_value);
+ tx_hdr->expiry_time = cpu_to_le32(1 << 16);
+ tx_hdr->id = id;
+
+ /* FIXME: how to get the correct queue id? */
+ tx_hdr->xmit_queue = 0;
+
+ wl12xx_tx_control(tx_hdr, control, fc);
+ wl12xx_tx_frag_block_num(tx_hdr);
+
+ return 0;
+}
+
+/* We copy the packet to the target */
+static int wl12xx_tx_send_packet(struct wl12xx *wl, struct sk_buff *skb,
+ struct ieee80211_tx_info *control)
+{
+ struct tx_double_buffer_desc *tx_hdr;
+ int len;
+ u32 addr;
+
+ if (!skb)
+ return -EINVAL;
+
+ tx_hdr = (struct tx_double_buffer_desc *) skb->data;
+
+ if (control->control.hw_key &&
+ control->control.hw_key->alg == ALG_TKIP) {
+ int hdrlen;
+ u16 fc;
+ u8 *pos;
+
+ fc = *(u16 *)(skb->data + sizeof(*tx_hdr));
+ tx_hdr->length += WL12XX_TKIP_IV_SPACE;
+
+ hdrlen = ieee80211_hdrlen(fc);
+
+ pos = skb_push(skb, WL12XX_TKIP_IV_SPACE);
+ memmove(pos, pos + WL12XX_TKIP_IV_SPACE,
+ sizeof(*tx_hdr) + hdrlen);
+ }
+
+ /* Revisit. This is a workaround for getting non-aligned packets.
+ This happens at least with EAPOL packets from the user space.
+ Our DMA requires packets to be aligned on a 4-byte boundary.
+ */
+ if (unlikely((long)skb->data & 0x03)) {
+ int offset = (4 - (long)skb->data) & 0x03;
+ wl12xx_debug(DEBUG_TX, "skb offset %d", offset);
+
+ /* check whether the current skb can be used */
+ if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
+ unsigned char *src = skb->data;
+
+ /* align the buffer on a 4-byte boundary */
+ skb_reserve(skb, offset);
+ memmove(skb->data, src, skb->len);
+ } else {
+ wl12xx_info("No handler, fixme!");
+ return -EINVAL;
+ }
+ }
+
+ /* Our skb->data at this point includes the HW header */
+ len = WL12XX_TX_ALIGN(skb->len);
+
+ if (wl->data_in_count & 0x1)
+ addr = wl->data_path->tx_packet_ring_addr +
+ wl->data_path->tx_packet_ring_chunk_size;
+ else
+ addr = wl->data_path->tx_packet_ring_addr;
+
+ wl12xx_spi_mem_write(wl, addr, skb->data, len);
+
+ wl12xx_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u rate 0x%x",
+ tx_hdr->id, skb, tx_hdr->length, tx_hdr->rate);
+
+ return 0;
+}
+
+static void wl12xx_tx_trigger(struct wl12xx *wl)
+{
+ u32 data, addr;
+
+ if (wl->data_in_count & 0x1) {
+ addr = ACX_REG_INTERRUPT_TRIG_H;
+ data = INTR_TRIG_TX_PROC1;
+ } else {
+ addr = ACX_REG_INTERRUPT_TRIG;
+ data = INTR_TRIG_TX_PROC0;
+ }
+
+ wl12xx_reg_write32(wl, addr, data);
+
+ /* Bumping data in */
+ wl->data_in_count = (wl->data_in_count + 1) &
+ TX_STATUS_DATA_OUT_COUNT_MASK;
+}
+
+/* caller must hold wl->mutex */
+static int wl12xx_tx_frame(struct wl12xx *wl, struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *info;
+ int ret = 0;
+ u8 idx;
+
+ info = IEEE80211_SKB_CB(skb);
+
+ if (info->control.hw_key) {
+ idx = info->control.hw_key->hw_key_idx;
+ if (unlikely(wl->default_key != idx)) {
+ ret = wl12xx_acx_default_key(wl, idx);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ ret = wl12xx_tx_path_status(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_tx_fill_hdr(wl, skb, info);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_tx_send_packet(wl, skb, info);
+ if (ret < 0)
+ return ret;
+
+ wl12xx_tx_trigger(wl);
+
+ return ret;
+}
+
+void wl12xx_tx_work(struct work_struct *work)
+{
+ struct wl12xx *wl = container_of(work, struct wl12xx, tx_work);
+ struct sk_buff *skb;
+ bool woken_up = false;
+ int ret;
+
+ mutex_lock(&wl->mutex);
+
+ if (unlikely(wl->state == WL12XX_STATE_OFF))
+ goto out;
+
+ while ((skb = skb_dequeue(&wl->tx_queue))) {
+ if (!woken_up) {
+ wl12xx_ps_elp_wakeup(wl);
+ woken_up = true;
+ }
+
+ ret = wl12xx_tx_frame(wl, skb);
+ if (ret == -EBUSY) {
+ /* firmware buffer is full, stop queues */
+ wl12xx_debug(DEBUG_TX, "tx_work: fw buffer full, "
+ "stop queues");
+ ieee80211_stop_queues(wl->hw);
+ wl->tx_queue_stopped = true;
+ skb_queue_head(&wl->tx_queue, skb);
+ goto out;
+ } else if (ret < 0) {
+ dev_kfree_skb(skb);
+ goto out;
+ }
+ }
+
+out:
+ if (woken_up)
+ wl12xx_ps_elp_sleep(wl);
+
+ mutex_unlock(&wl->mutex);
+}
+
+static const char *wl12xx_tx_parse_status(u8 status)
+{
+ /* 8 bit status field, one character per bit plus null */
+ static char buf[9];
+ int i = 0;
+
+ memset(buf, 0, sizeof(buf));
+
+ if (status & TX_DMA_ERROR)
+ buf[i++] = 'm';
+ if (status & TX_DISABLED)
+ buf[i++] = 'd';
+ if (status & TX_RETRY_EXCEEDED)
+ buf[i++] = 'r';
+ if (status & TX_TIMEOUT)
+ buf[i++] = 't';
+ if (status & TX_KEY_NOT_FOUND)
+ buf[i++] = 'k';
+ if (status & TX_ENCRYPT_FAIL)
+ buf[i++] = 'e';
+ if (status & TX_UNAVAILABLE_PRIORITY)
+ buf[i++] = 'p';
+
+ /* bit 0 is unused apparently */
+
+ return buf;
+}
+
+static void wl12xx_tx_packet_cb(struct wl12xx *wl,
+ struct tx_result *result)
+{
+ struct ieee80211_tx_info *info;
+ struct sk_buff *skb;
+ int hdrlen, ret;
+ u8 *frame;
+
+ skb = wl->tx_frames[result->id];
+ if (skb == NULL) {
+ wl12xx_error("SKB for packet %d is NULL", result->id);
+ return;
+ }
+
+ info = IEEE80211_SKB_CB(skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+ (result->status == TX_SUCCESS))
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
+ info->status.rates[0].count = result->ack_failures + 1;
+ wl->stats.retry_count += result->ack_failures;
+
+ /*
+ * We have to remove our private TX header before pushing
+ * the skb back to mac80211.
+ */
+ frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc));
+ if (info->control.hw_key &&
+ info->control.hw_key->alg == ALG_TKIP) {
+ hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ memmove(frame + WL12XX_TKIP_IV_SPACE, frame, hdrlen);
+ skb_pull(skb, WL12XX_TKIP_IV_SPACE);
+ }
+
+ wl12xx_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
+ " status 0x%x (%s)",
+ result->id, skb, result->ack_failures, result->rate,
+ result->status, wl12xx_tx_parse_status(result->status));
+
+
+ ieee80211_tx_status(wl->hw, skb);
+
+ wl->tx_frames[result->id] = NULL;
+
+ if (wl->tx_queue_stopped) {
+ wl12xx_debug(DEBUG_TX, "cb: queue was stopped");
+
+ skb = skb_dequeue(&wl->tx_queue);
+
+ /* The skb can be NULL because tx_work might have been
+ scheduled before the queue was stopped making the
+ queue empty */
+
+ if (skb) {
+ ret = wl12xx_tx_frame(wl, skb);
+ if (ret == -EBUSY) {
+ /* firmware buffer is still full */
+ wl12xx_debug(DEBUG_TX, "cb: fw buffer "
+ "still full");
+ skb_queue_head(&wl->tx_queue, skb);
+ return;
+ } else if (ret < 0) {
+ dev_kfree_skb(skb);
+ return;
+ }
+ }
+
+ wl12xx_debug(DEBUG_TX, "cb: waking queues");
+ ieee80211_wake_queues(wl->hw);
+ wl->tx_queue_stopped = false;
+ }
+}
+
+/* Called upon reception of a TX complete interrupt */
+void wl12xx_tx_complete(struct wl12xx *wl)
+{
+ int i, result_index, num_complete = 0;
+ struct tx_result result[FW_TX_CMPLT_BLOCK_SIZE], *result_ptr;
+
+ if (unlikely(wl->state != WL12XX_STATE_ON))
+ return;
+
+ /* First we read the result */
+ wl12xx_spi_mem_read(wl, wl->data_path->tx_complete_addr,
+ result, sizeof(result));
+
+ result_index = wl->next_tx_complete;
+
+ for (i = 0; i < ARRAY_SIZE(result); i++) {
+ result_ptr = &result[result_index];
+
+ if (result_ptr->done_1 == 1 &&
+ result_ptr->done_2 == 1) {
+ wl12xx_tx_packet_cb(wl, result_ptr);
+
+ result_ptr->done_1 = 0;
+ result_ptr->done_2 = 0;
+
+ result_index = (result_index + 1) &
+ (FW_TX_CMPLT_BLOCK_SIZE - 1);
+ num_complete++;
+ } else {
+ break;
+ }
+ }
+
+ /* Every completed frame needs to be acknowledged */
+ if (num_complete) {
+ /*
+ * If we've wrapped, we have to clear
+ * the results in 2 steps.
+ */
+ if (result_index > wl->next_tx_complete) {
+ /* Only 1 write is needed */
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr +
+ (wl->next_tx_complete *
+ sizeof(struct tx_result)),
+ &result[wl->next_tx_complete],
+ num_complete *
+ sizeof(struct tx_result));
+
+
+ } else if (result_index < wl->next_tx_complete) {
+ /* 2 writes are needed */
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr +
+ (wl->next_tx_complete *
+ sizeof(struct tx_result)),
+ &result[wl->next_tx_complete],
+ (FW_TX_CMPLT_BLOCK_SIZE -
+ wl->next_tx_complete) *
+ sizeof(struct tx_result));
+
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr,
+ result,
+ (num_complete -
+ FW_TX_CMPLT_BLOCK_SIZE +
+ wl->next_tx_complete) *
+ sizeof(struct tx_result));
+
+ } else {
+ /* We have to write the whole array */
+ wl12xx_spi_mem_write(wl,
+ wl->data_path->tx_complete_addr,
+ result,
+ FW_TX_CMPLT_BLOCK_SIZE *
+ sizeof(struct tx_result));
+ }
+
+ }
+
+ wl->next_tx_complete = result_index;
+}
+
+/* caller must hold wl->mutex */
+void wl12xx_tx_flush(struct wl12xx *wl)
+{
+ int i;
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *info;
+
+ /* TX failure */
+/* control->flags = 0; FIXME */
+
+ while ((skb = skb_dequeue(&wl->tx_queue))) {
+ info = IEEE80211_SKB_CB(skb);
+
+ wl12xx_debug(DEBUG_TX, "flushing skb 0x%p", skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+ continue;
+
+ ieee80211_tx_status(wl->hw, skb);
+ }
+
+ for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+ if (wl->tx_frames[i] != NULL) {
+ skb = wl->tx_frames[i];
+ info = IEEE80211_SKB_CB(skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
+ continue;
+
+ ieee80211_tx_status(wl->hw, skb);
+ wl->tx_frames[i] = NULL;
+ }
+}
diff --git a/drivers/net/wireless/wl12xx/tx.h b/drivers/net/wireless/wl12xx/tx.h
new file mode 100644
index 00000000000..dc82691f4c1
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -0,0 +1,215 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_TX_H__
+#define __WL12XX_TX_H__
+
+#include <linux/bitops.h>
+
+/*
+ *
+ * TX PATH
+ *
+ * The Tx path uses a double buffer and a tx_control structure, each located
+ * at a fixed address in the device's memory. On startup, the host retrieves
+ * the pointers to these addresses. A double buffer allows for continuous data
+ * flow towards the device. The host keeps track of which buffer is available
+ * and alternates between these two buffers on a per packet basis.
+ *
+ * The size of each of the two buffers is large enough to hold the longest
+ * 802.3 packet - maximum size Ethernet packet + header + descriptor.
+ * TX complete indication will be received a-synchronously in a TX done cyclic
+ * buffer which is composed of 16 tx_result descriptors structures and is used
+ * in a cyclic manner.
+ *
+ * The TX (HOST) procedure is as follows:
+ * 1. Read the Tx path status, that will give the data_out_count.
+ * 2. goto 1, if not possible.
+ * i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
+ * buffer).
+ * 3. Copy the packet (preceded by double_buffer_desc), if possible.
+ * i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
+ * buffer).
+ * 4. increment data_in_count.
+ * 5. Inform the firmware by generating a firmware internal interrupt.
+ * 6. FW will increment data_out_count after it reads the buffer.
+ *
+ * The TX Complete procedure:
+ * 1. To get a TX complete indication the host enables the tx_complete flag in
+ * the TX descriptor Structure.
+ * 2. For each packet with a Tx Complete field set, the firmware adds the
+ * transmit results to the cyclic buffer (txDoneRing) and sets both done_1
+ * and done_2 to 1 to indicate driver ownership.
+ * 3. The firmware sends a Tx Complete interrupt to the host to trigger the
+ * host to process the new data. Note: interrupt will be send per packet if
+ * TX complete indication was requested in tx_control or per crossing
+ * aggregation threshold.
+ * 4. After receiving the Tx Complete interrupt, the host reads the
+ * TxDescriptorDone information in a cyclic manner and clears both done_1
+ * and done_2 fields.
+ *
+ */
+
+#define TX_COMPLETE_REQUIRED_BIT 0x80
+#define TX_STATUS_DATA_OUT_COUNT_MASK 0xf
+#define WL12XX_TX_ALIGN_TO 4
+#define WL12XX_TX_ALIGN(len) (((len) + WL12XX_TX_ALIGN_TO - 1) & \
+ ~(WL12XX_TX_ALIGN_TO - 1))
+#define WL12XX_TKIP_IV_SPACE 4
+
+struct tx_control {
+ /* Rate Policy (class) index */
+ unsigned rate_policy:3;
+
+ /* When set, no ack policy is expected */
+ unsigned ack_policy:1;
+
+ /*
+ * Packet type:
+ * 0 -> 802.11
+ * 1 -> 802.3
+ * 2 -> IP
+ * 3 -> raw codec
+ */
+ unsigned packet_type:2;
+
+ /* If set, this is a QoS-Null or QoS-Data frame */
+ unsigned qos:1;
+
+ /*
+ * If set, the target triggers the tx complete INT
+ * upon frame sending completion.
+ */
+ unsigned tx_complete:1;
+
+ /* 2 bytes padding before packet header */
+ unsigned xfer_pad:1;
+
+ unsigned reserved:7;
+} __attribute__ ((packed));
+
+
+struct tx_double_buffer_desc {
+ /* Length of payload, including headers. */
+ u16 length;
+
+ /*
+ * A bit mask that specifies the initial rate to be used
+ * Possible values are:
+ * 0x0001 - 1Mbits
+ * 0x0002 - 2Mbits
+ * 0x0004 - 5.5Mbits
+ * 0x0008 - 6Mbits
+ * 0x0010 - 9Mbits
+ * 0x0020 - 11Mbits
+ * 0x0040 - 12Mbits
+ * 0x0080 - 18Mbits
+ * 0x0100 - 22Mbits
+ * 0x0200 - 24Mbits
+ * 0x0400 - 36Mbits
+ * 0x0800 - 48Mbits
+ * 0x1000 - 54Mbits
+ */
+ u16 rate;
+
+ /* Time in us that a packet can spend in the target */
+ u32 expiry_time;
+
+ /* index of the TX queue used for this packet */
+ u8 xmit_queue;
+
+ /* Used to identify a packet */
+ u8 id;
+
+ struct tx_control control;
+
+ /*
+ * The FW should cut the packet into fragments
+ * of this size.
+ */
+ u16 frag_threshold;
+
+ /* Numbers of HW queue blocks to be allocated */
+ u8 num_mem_blocks;
+
+ u8 reserved;
+} __attribute__ ((packed));
+
+enum {
+ TX_SUCCESS = 0,
+ TX_DMA_ERROR = BIT(7),
+ TX_DISABLED = BIT(6),
+ TX_RETRY_EXCEEDED = BIT(5),
+ TX_TIMEOUT = BIT(4),
+ TX_KEY_NOT_FOUND = BIT(3),
+ TX_ENCRYPT_FAIL = BIT(2),
+ TX_UNAVAILABLE_PRIORITY = BIT(1),
+};
+
+struct tx_result {
+ /*
+ * Ownership synchronization between the host and
+ * the firmware. If done_1 and done_2 are cleared,
+ * owned by the FW (no info ready).
+ */
+ u8 done_1;
+
+ /* same as double_buffer_desc->id */
+ u8 id;
+
+ /*
+ * Total air access duration consumed by this
+ * packet, including all retries and overheads.
+ */
+ u16 medium_usage;
+
+ /* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
+ u32 medium_delay;
+
+ /* Time between host xfer and tx complete */
+ u32 fw_hnadling_time;
+
+ /* The LS-byte of the last TKIP sequence number. */
+ u8 lsb_seq_num;
+
+ /* Retry count */
+ u8 ack_failures;
+
+ /* At which rate we got a ACK */
+ u16 rate;
+
+ u16 reserved;
+
+ /* TX_* */
+ u8 status;
+
+ /* See done_1 */
+ u8 done_2;
+} __attribute__ ((packed));
+
+void wl12xx_tx_work(struct work_struct *work);
+void wl12xx_tx_complete(struct wl12xx *wl);
+void wl12xx_tx_flush(struct wl12xx *wl);
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251.c b/drivers/net/wireless/wl12xx/wl1251.c
new file mode 100644
index 00000000000..ce1561a41fa
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251.c
@@ -0,0 +1,709 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "wl1251.h"
+#include "reg.h"
+#include "spi.h"
+#include "boot.h"
+#include "event.h"
+#include "acx.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+
+static struct wl12xx_partition_set wl1251_part_table[PART_TABLE_LEN] = {
+ [PART_DOWN] = {
+ .mem = {
+ .start = 0x00000000,
+ .size = 0x00016800
+ },
+ .reg = {
+ .start = REGISTERS_BASE,
+ .size = REGISTERS_DOWN_SIZE
+ },
+ },
+
+ [PART_WORK] = {
+ .mem = {
+ .start = 0x00028000,
+ .size = 0x00014000
+ },
+ .reg = {
+ .start = REGISTERS_BASE,
+ .size = REGISTERS_WORK_SIZE
+ },
+ },
+
+ /* WL1251 doesn't use the DRPW partition, so we don't set it here */
+};
+
+static enum wl12xx_acx_int_reg wl1251_acx_reg_table[ACX_REG_TABLE_LEN] = {
+ [ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474),
+ [ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478),
+ [ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494),
+ [ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498),
+ [ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C),
+ [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0),
+ [ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4),
+ [ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8),
+ [ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000),
+ [ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C),
+ [ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804)
+};
+
+static int wl1251_upload_firmware(struct wl12xx *wl)
+{
+ struct wl12xx_partition_set *p_table = wl->chip.p_table;
+ int addr, chunk_num, partition_limit;
+ size_t fw_data_len;
+ u8 *p;
+
+ /* whal_FwCtrl_LoadFwImageSm() */
+
+ wl12xx_debug(DEBUG_BOOT, "chip id before fw upload: 0x%x",
+ wl12xx_reg_read32(wl, CHIP_ID_B));
+
+ /* 10.0 check firmware length and set partition */
+ fw_data_len = (wl->fw[4] << 24) | (wl->fw[5] << 16) |
+ (wl->fw[6] << 8) | (wl->fw[7]);
+
+ wl12xx_debug(DEBUG_BOOT, "fw_data_len %zu chunk_size %d", fw_data_len,
+ CHUNK_SIZE);
+
+ if ((fw_data_len % 4) != 0) {
+ wl12xx_error("firmware length not multiple of four");
+ return -EIO;
+ }
+
+ wl12xx_set_partition(wl,
+ p_table[PART_DOWN].mem.start,
+ p_table[PART_DOWN].mem.size,
+ p_table[PART_DOWN].reg.start,
+ p_table[PART_DOWN].reg.size);
+
+ /* 10.1 set partition limit and chunk num */
+ chunk_num = 0;
+ partition_limit = p_table[PART_DOWN].mem.size;
+
+ while (chunk_num < fw_data_len / CHUNK_SIZE) {
+ /* 10.2 update partition, if needed */
+ addr = p_table[PART_DOWN].mem.start +
+ (chunk_num + 2) * CHUNK_SIZE;
+ if (addr > partition_limit) {
+ addr = p_table[PART_DOWN].mem.start +
+ chunk_num * CHUNK_SIZE;
+ partition_limit = chunk_num * CHUNK_SIZE +
+ p_table[PART_DOWN].mem.size;
+ wl12xx_set_partition(wl,
+ addr,
+ p_table[PART_DOWN].mem.size,
+ p_table[PART_DOWN].reg.start,
+ p_table[PART_DOWN].reg.size);
+ }
+
+ /* 10.3 upload the chunk */
+ addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
+ p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+ wl12xx_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
+ p, addr);
+ wl12xx_spi_mem_write(wl, addr, p, CHUNK_SIZE);
+
+ chunk_num++;
+ }
+
+ /* 10.4 upload the last chunk */
+ addr = p_table[PART_DOWN].mem.start + chunk_num * CHUNK_SIZE;
+ p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+ wl12xx_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x",
+ fw_data_len % CHUNK_SIZE, p, addr);
+ wl12xx_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
+
+ return 0;
+}
+
+static int wl1251_upload_nvs(struct wl12xx *wl)
+{
+ size_t nvs_len, nvs_bytes_written, burst_len;
+ int nvs_start, i;
+ u32 dest_addr, val;
+ u8 *nvs_ptr, *nvs;
+
+ nvs = wl->nvs;
+ if (nvs == NULL)
+ return -ENODEV;
+
+ nvs_ptr = nvs;
+
+ nvs_len = wl->nvs_len;
+ nvs_start = wl->fw_len;
+
+ /*
+ * Layout before the actual NVS tables:
+ * 1 byte : burst length.
+ * 2 bytes: destination address.
+ * n bytes: data to burst copy.
+ *
+ * This is ended by a 0 length, then the NVS tables.
+ */
+
+ while (nvs_ptr[0]) {
+ burst_len = nvs_ptr[0];
+ dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
+
+ /* We move our pointer to the data */
+ nvs_ptr += 3;
+
+ for (i = 0; i < burst_len; i++) {
+ val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+ | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+ wl12xx_debug(DEBUG_BOOT,
+ "nvs burst write 0x%x: 0x%x",
+ dest_addr, val);
+ wl12xx_mem_write32(wl, dest_addr, val);
+
+ nvs_ptr += 4;
+ dest_addr += 4;
+ }
+ }
+
+ /*
+ * We've reached the first zero length, the first NVS table
+ * is 7 bytes further.
+ */
+ nvs_ptr += 7;
+ nvs_len -= nvs_ptr - nvs;
+ nvs_len = ALIGN(nvs_len, 4);
+
+ /* Now we must set the partition correctly */
+ wl12xx_set_partition(wl, nvs_start,
+ wl->chip.p_table[PART_DOWN].mem.size,
+ wl->chip.p_table[PART_DOWN].reg.start,
+ wl->chip.p_table[PART_DOWN].reg.size);
+
+ /* And finally we upload the NVS tables */
+ nvs_bytes_written = 0;
+ while (nvs_bytes_written < nvs_len) {
+ val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+ | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+ val = cpu_to_le32(val);
+
+ wl12xx_debug(DEBUG_BOOT,
+ "nvs write table 0x%x: 0x%x",
+ nvs_start, val);
+ wl12xx_mem_write32(wl, nvs_start, val);
+
+ nvs_ptr += 4;
+ nvs_bytes_written += 4;
+ nvs_start += 4;
+ }
+
+ return 0;
+}
+
+static int wl1251_boot(struct wl12xx *wl)
+{
+ int ret = 0, minor_minor_e2_ver;
+ u32 tmp, boot_data;
+
+ ret = wl12xx_boot_soft_reset(wl);
+ if (ret < 0)
+ goto out;
+
+ /* 2. start processing NVS file */
+ ret = wl->chip.op_upload_nvs(wl);
+ if (ret < 0)
+ goto out;
+
+ /* write firmware's last address (ie. it's length) to
+ * ACX_EEPROMLESS_IND_REG */
+ wl12xx_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
+
+ /* 6. read the EEPROM parameters */
+ tmp = wl12xx_reg_read32(wl, SCR_PAD2);
+
+ /* 7. read bootdata */
+ wl->boot_attr.radio_type = (tmp & 0x0000FF00) >> 8;
+ wl->boot_attr.major = (tmp & 0x00FF0000) >> 16;
+ tmp = wl12xx_reg_read32(wl, SCR_PAD3);
+
+ /* 8. check bootdata and call restart sequence */
+ wl->boot_attr.minor = (tmp & 0x00FF0000) >> 16;
+ minor_minor_e2_ver = (tmp & 0xFF000000) >> 24;
+
+ wl12xx_debug(DEBUG_BOOT, "radioType 0x%x majorE2Ver 0x%x "
+ "minorE2Ver 0x%x minor_minor_e2_ver 0x%x",
+ wl->boot_attr.radio_type, wl->boot_attr.major,
+ wl->boot_attr.minor, minor_minor_e2_ver);
+
+ ret = wl12xx_boot_init_seq(wl);
+ if (ret < 0)
+ goto out;
+
+ /* 9. NVS processing done */
+ boot_data = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+ wl12xx_debug(DEBUG_BOOT, "halt boot_data 0x%x", boot_data);
+
+ /* 10. check that ECPU_CONTROL_HALT bits are set in
+ * pWhalBus->uBootData and start uploading firmware
+ */
+ if ((boot_data & ECPU_CONTROL_HALT) == 0) {
+ wl12xx_error("boot failed, ECPU_CONTROL_HALT not set");
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = wl->chip.op_upload_fw(wl);
+ if (ret < 0)
+ goto out;
+
+ /* 10.5 start firmware */
+ ret = wl12xx_boot_run_firmware(wl);
+ if (ret < 0)
+ goto out;
+
+ /* Get and save the firmware version */
+ wl12xx_acx_fw_version(wl, wl->chip.fw_ver, sizeof(wl->chip.fw_ver));
+
+out:
+ return ret;
+}
+
+static int wl1251_mem_cfg(struct wl12xx *wl)
+{
+ struct wl1251_acx_config_memory mem_conf;
+ int ret, i;
+
+ wl12xx_debug(DEBUG_ACX, "wl1251 mem cfg");
+
+ /* memory config */
+ mem_conf.mem_config.num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
+ mem_conf.mem_config.rx_mem_block_num = 35;
+ mem_conf.mem_config.tx_min_mem_block_num = 64;
+ mem_conf.mem_config.num_tx_queues = MAX_TX_QUEUES;
+ mem_conf.mem_config.host_if_options = HOSTIF_PKT_RING;
+ mem_conf.mem_config.num_ssid_profiles = 1;
+ mem_conf.mem_config.debug_buffer_size =
+ cpu_to_le16(TRACE_BUFFER_MAX_SIZE);
+
+ /* RX queue config */
+ mem_conf.rx_queue_config.dma_address = 0;
+ mem_conf.rx_queue_config.num_descs = ACX_RX_DESC_DEF;
+ mem_conf.rx_queue_config.priority = DEFAULT_RXQ_PRIORITY;
+ mem_conf.rx_queue_config.type = DEFAULT_RXQ_TYPE;
+
+ /* TX queue config */
+ for (i = 0; i < MAX_TX_QUEUES; i++) {
+ mem_conf.tx_queue_config[i].num_descs = ACX_TX_DESC_DEF;
+ mem_conf.tx_queue_config[i].attributes = i;
+ }
+
+ mem_conf.header.id = ACX_MEM_CFG;
+ mem_conf.header.len = sizeof(struct wl1251_acx_config_memory) -
+ sizeof(struct acx_header);
+ mem_conf.header.len -=
+ (MAX_TX_QUEUE_CONFIGS - mem_conf.mem_config.num_tx_queues) *
+ sizeof(struct wl1251_acx_tx_queue_config);
+
+ ret = wl12xx_cmd_configure(wl, &mem_conf,
+ sizeof(struct wl1251_acx_config_memory));
+ if (ret < 0)
+ wl12xx_warning("wl1251 mem config failed: %d", ret);
+
+ return ret;
+}
+
+static int wl1251_hw_init_mem_config(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl1251_mem_cfg(wl);
+ if (ret < 0)
+ return ret;
+
+ wl->target_mem_map = kzalloc(sizeof(struct wl1251_acx_mem_map),
+ GFP_KERNEL);
+ if (!wl->target_mem_map) {
+ wl12xx_error("couldn't allocate target memory map");
+ return -ENOMEM;
+ }
+
+ /* we now ask for the firmware built memory map */
+ ret = wl12xx_acx_mem_map(wl, wl->target_mem_map,
+ sizeof(struct wl1251_acx_mem_map));
+ if (ret < 0) {
+ wl12xx_error("couldn't retrieve firmware memory map");
+ kfree(wl->target_mem_map);
+ wl->target_mem_map = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static void wl1251_set_ecpu_ctrl(struct wl12xx *wl, u32 flag)
+{
+ u32 cpu_ctrl;
+
+ /* 10.5.0 run the firmware (I) */
+ cpu_ctrl = wl12xx_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+
+ /* 10.5.1 run the firmware (II) */
+ cpu_ctrl &= ~flag;
+ wl12xx_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+}
+
+static void wl1251_target_enable_interrupts(struct wl12xx *wl)
+{
+ /* Enable target's interrupts */
+ wl->intr_mask = WL1251_ACX_INTR_RX0_DATA |
+ WL1251_ACX_INTR_RX1_DATA |
+ WL1251_ACX_INTR_TX_RESULT |
+ WL1251_ACX_INTR_EVENT_A |
+ WL1251_ACX_INTR_EVENT_B |
+ WL1251_ACX_INTR_INIT_COMPLETE;
+ wl12xx_boot_target_enable_interrupts(wl);
+}
+
+static void wl1251_irq_work(struct work_struct *work)
+{
+ u32 intr;
+ struct wl12xx *wl =
+ container_of(work, struct wl12xx, irq_work);
+
+ mutex_lock(&wl->mutex);
+
+ wl12xx_debug(DEBUG_IRQ, "IRQ work");
+
+ if (wl->state == WL12XX_STATE_OFF)
+ goto out;
+
+ wl12xx_ps_elp_wakeup(wl);
+
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1251_ACX_INTR_ALL);
+
+ intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+ wl12xx_debug(DEBUG_IRQ, "intr: 0x%x", intr);
+
+ if (wl->data_path) {
+ wl12xx_spi_mem_read(wl, wl->data_path->rx_control_addr,
+ &wl->rx_counter, sizeof(u32));
+
+ /* We handle a frmware bug here */
+ switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
+ case 0:
+ wl12xx_debug(DEBUG_IRQ, "RX: FW and host in sync");
+ intr &= ~WL1251_ACX_INTR_RX0_DATA;
+ intr &= ~WL1251_ACX_INTR_RX1_DATA;
+ break;
+ case 1:
+ wl12xx_debug(DEBUG_IRQ, "RX: FW +1");
+ intr |= WL1251_ACX_INTR_RX0_DATA;
+ intr &= ~WL1251_ACX_INTR_RX1_DATA;
+ break;
+ case 2:
+ wl12xx_debug(DEBUG_IRQ, "RX: FW +2");
+ intr |= WL1251_ACX_INTR_RX0_DATA;
+ intr |= WL1251_ACX_INTR_RX1_DATA;
+ break;
+ default:
+ wl12xx_warning("RX: FW and host out of sync: %d",
+ wl->rx_counter - wl->rx_handled);
+ break;
+ }
+
+ wl->rx_handled = wl->rx_counter;
+
+
+ wl12xx_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter);
+ }
+
+ intr &= wl->intr_mask;
+
+ if (intr == 0) {
+ wl12xx_debug(DEBUG_IRQ, "INTR is 0");
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+ ~(wl->intr_mask));
+
+ goto out_sleep;
+ }
+
+ if (intr & WL1251_ACX_INTR_RX0_DATA) {
+ wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
+ wl12xx_rx(wl);
+ }
+
+ if (intr & WL1251_ACX_INTR_RX1_DATA) {
+ wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
+ wl12xx_rx(wl);
+ }
+
+ if (intr & WL1251_ACX_INTR_TX_RESULT) {
+ wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
+ wl12xx_tx_complete(wl);
+ }
+
+ if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) {
+ wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr);
+ if (intr & WL1251_ACX_INTR_EVENT_A)
+ wl12xx_event_handle(wl, 0);
+ else
+ wl12xx_event_handle(wl, 1);
+ }
+
+ if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
+ wl12xx_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE");
+
+ wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+
+out_sleep:
+ wl12xx_ps_elp_sleep(wl);
+out:
+ mutex_unlock(&wl->mutex);
+}
+
+static int wl1251_hw_init_txq_fill(u8 qid,
+ struct acx_tx_queue_qos_config *config,
+ u32 num_blocks)
+{
+ config->qid = qid;
+
+ switch (qid) {
+ case QOS_AC_BE:
+ config->high_threshold =
+ (QOS_TX_HIGH_BE_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_BE_DEF * num_blocks) / 100;
+ break;
+ case QOS_AC_BK:
+ config->high_threshold =
+ (QOS_TX_HIGH_BK_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_BK_DEF * num_blocks) / 100;
+ break;
+ case QOS_AC_VI:
+ config->high_threshold =
+ (QOS_TX_HIGH_VI_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_VI_DEF * num_blocks) / 100;
+ break;
+ case QOS_AC_VO:
+ config->high_threshold =
+ (QOS_TX_HIGH_VO_DEF * num_blocks) / 100;
+ config->low_threshold =
+ (QOS_TX_LOW_VO_DEF * num_blocks) / 100;
+ break;
+ default:
+ wl12xx_error("Invalid TX queue id: %d", qid);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wl1251_hw_init_tx_queue_config(struct wl12xx *wl)
+{
+ struct acx_tx_queue_qos_config config;
+ struct wl1251_acx_mem_map *wl_mem_map = wl->target_mem_map;
+ int ret, i;
+
+ wl12xx_debug(DEBUG_ACX, "acx tx queue config");
+
+ config.header.id = ACX_TX_QUEUE_CFG;
+ config.header.len = sizeof(struct acx_tx_queue_qos_config) -
+ sizeof(struct acx_header);
+
+ for (i = 0; i < MAX_NUM_OF_AC; i++) {
+ ret = wl1251_hw_init_txq_fill(i, &config,
+ wl_mem_map->num_tx_mem_blocks);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_configure(wl, &config, sizeof(config));
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wl1251_hw_init_data_path_config(struct wl12xx *wl)
+{
+ int ret;
+
+ /* asking for the data path parameters */
+ wl->data_path = kzalloc(sizeof(struct acx_data_path_params_resp),
+ GFP_KERNEL);
+ if (!wl->data_path) {
+ wl12xx_error("Couldnt allocate data path parameters");
+ return -ENOMEM;
+ }
+
+ ret = wl12xx_acx_data_path_params(wl, wl->data_path);
+ if (ret < 0) {
+ kfree(wl->data_path);
+ wl->data_path = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wl1251_hw_init(struct wl12xx *wl)
+{
+ struct wl1251_acx_mem_map *wl_mem_map;
+ int ret;
+
+ ret = wl12xx_hw_init_hwenc_config(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Template settings */
+ ret = wl12xx_hw_init_templates_config(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Default memory configuration */
+ ret = wl1251_hw_init_mem_config(wl);
+ if (ret < 0)
+ return ret;
+
+ /* Default data path configuration */
+ ret = wl1251_hw_init_data_path_config(wl);
+ if (ret < 0)
+ goto out_free_memmap;
+
+ /* RX config */
+ ret = wl12xx_hw_init_rx_config(wl,
+ RX_CFG_PROMISCUOUS | RX_CFG_TSF,
+ RX_FILTER_OPTION_DEF);
+ /* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
+ RX_FILTER_OPTION_FILTER_ALL); */
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* TX queues config */
+ ret = wl1251_hw_init_tx_queue_config(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* PHY layer config */
+ ret = wl12xx_hw_init_phy_config(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Beacon filtering */
+ ret = wl12xx_hw_init_beacon_filter(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Bluetooth WLAN coexistence */
+ ret = wl12xx_hw_init_pta(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Energy detection */
+ ret = wl12xx_hw_init_energy_detection(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Beacons and boradcast settings */
+ ret = wl12xx_hw_init_beacon_broadcast(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Enable data path */
+ ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ /* Default power state */
+ ret = wl12xx_hw_init_power_auth(wl);
+ if (ret < 0)
+ goto out_free_data_path;
+
+ wl_mem_map = wl->target_mem_map;
+ wl12xx_info("%d tx blocks at 0x%x, %d rx blocks at 0x%x",
+ wl_mem_map->num_tx_mem_blocks,
+ wl->data_path->tx_control_addr,
+ wl_mem_map->num_rx_mem_blocks,
+ wl->data_path->rx_control_addr);
+
+ return 0;
+
+ out_free_data_path:
+ kfree(wl->data_path);
+
+ out_free_memmap:
+ kfree(wl->target_mem_map);
+
+ return ret;
+}
+
+static int wl1251_plt_init(struct wl12xx *wl)
+{
+ int ret;
+
+ ret = wl1251_hw_init_mem_config(wl);
+ if (ret < 0)
+ return ret;
+
+ ret = wl12xx_cmd_data_path(wl, wl->channel, 1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+void wl1251_setup(struct wl12xx *wl)
+{
+ /* FIXME: Is it better to use strncpy here or is this ok? */
+ wl->chip.fw_filename = WL1251_FW_NAME;
+ wl->chip.nvs_filename = WL1251_NVS_NAME;
+
+ /* Now we know what chip we're using, so adjust the power on sleep
+ * time accordingly */
+ wl->chip.power_on_sleep = WL1251_POWER_ON_SLEEP;
+
+ wl->chip.intr_cmd_complete = WL1251_ACX_INTR_CMD_COMPLETE;
+ wl->chip.intr_init_complete = WL1251_ACX_INTR_INIT_COMPLETE;
+
+ wl->chip.op_upload_nvs = wl1251_upload_nvs;
+ wl->chip.op_upload_fw = wl1251_upload_firmware;
+ wl->chip.op_boot = wl1251_boot;
+ wl->chip.op_set_ecpu_ctrl = wl1251_set_ecpu_ctrl;
+ wl->chip.op_target_enable_interrupts = wl1251_target_enable_interrupts;
+ wl->chip.op_hw_init = wl1251_hw_init;
+ wl->chip.op_plt_init = wl1251_plt_init;
+
+ wl->chip.p_table = wl1251_part_table;
+ wl->chip.acx_reg_table = wl1251_acx_reg_table;
+
+ INIT_WORK(&wl->irq_work, wl1251_irq_work);
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
new file mode 100644
index 00000000000..1f4a4433039
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -0,0 +1,165 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1251_H__
+#define __WL1251_H__
+
+#include <linux/bitops.h>
+
+#include "wl12xx.h"
+#include "acx.h"
+
+#define WL1251_FW_NAME "wl1251-fw.bin"
+#define WL1251_NVS_NAME "wl1251-nvs.bin"
+
+#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+
+void wl1251_setup(struct wl12xx *wl);
+
+
+struct wl1251_acx_memory {
+ __le16 num_stations; /* number of STAs to be supported. */
+ u16 reserved_1;
+
+ /*
+ * Nmber of memory buffers for the RX mem pool.
+ * The actual number may be less if there are
+ * not enough blocks left for the minimum num
+ * of TX ones.
+ */
+ u8 rx_mem_block_num;
+ u8 reserved_2;
+ u8 num_tx_queues; /* From 1 to 16 */
+ u8 host_if_options; /* HOST_IF* */
+ u8 tx_min_mem_block_num;
+ u8 num_ssid_profiles;
+ __le16 debug_buffer_size;
+} __attribute__ ((packed));
+
+
+#define ACX_RX_DESC_MIN 1
+#define ACX_RX_DESC_MAX 127
+#define ACX_RX_DESC_DEF 32
+struct wl1251_acx_rx_queue_config {
+ u8 num_descs;
+ u8 pad;
+ u8 type;
+ u8 priority;
+ __le32 dma_address;
+} __attribute__ ((packed));
+
+#define ACX_TX_DESC_MIN 1
+#define ACX_TX_DESC_MAX 127
+#define ACX_TX_DESC_DEF 16
+struct wl1251_acx_tx_queue_config {
+ u8 num_descs;
+ u8 pad[2];
+ u8 attributes;
+} __attribute__ ((packed));
+
+#define MAX_TX_QUEUE_CONFIGS 5
+#define MAX_TX_QUEUES 4
+struct wl1251_acx_config_memory {
+ struct acx_header header;
+
+ struct wl1251_acx_memory mem_config;
+ struct wl1251_acx_rx_queue_config rx_queue_config;
+ struct wl1251_acx_tx_queue_config tx_queue_config[MAX_TX_QUEUE_CONFIGS];
+} __attribute__ ((packed));
+
+struct wl1251_acx_mem_map {
+ struct acx_header header;
+
+ void *code_start;
+ void *code_end;
+
+ void *wep_defkey_start;
+ void *wep_defkey_end;
+
+ void *sta_table_start;
+ void *sta_table_end;
+
+ void *packet_template_start;
+ void *packet_template_end;
+
+ void *queue_memory_start;
+ void *queue_memory_end;
+
+ void *packet_memory_pool_start;
+ void *packet_memory_pool_end;
+
+ void *debug_buffer1_start;
+ void *debug_buffer1_end;
+
+ void *debug_buffer2_start;
+ void *debug_buffer2_end;
+
+ /* Number of blocks FW allocated for TX packets */
+ u32 num_tx_mem_blocks;
+
+ /* Number of blocks FW allocated for RX packets */
+ u32 num_rx_mem_blocks;
+} __attribute__ ((packed));
+
+/*************************************************************************
+
+ Host Interrupt Register (WiLink -> Host)
+
+**************************************************************************/
+
+/* RX packet is ready in Xfer buffer #0 */
+#define WL1251_ACX_INTR_RX0_DATA BIT(0)
+
+/* TX result(s) are in the TX complete buffer */
+#define WL1251_ACX_INTR_TX_RESULT BIT(1)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_TX_XFR BIT(2)
+
+/* RX packet is ready in Xfer buffer #1 */
+#define WL1251_ACX_INTR_RX1_DATA BIT(3)
+
+/* Event was entered to Event MBOX #A */
+#define WL1251_ACX_INTR_EVENT_A BIT(4)
+
+/* Event was entered to Event MBOX #B */
+#define WL1251_ACX_INTR_EVENT_B BIT(5)
+
+/* OBSOLETE */
+#define WL1251_ACX_INTR_WAKE_ON_HOST BIT(6)
+
+/* Trace meassge on MBOX #A */
+#define WL1251_ACX_INTR_TRACE_A BIT(7)
+
+/* Trace meassge on MBOX #B */
+#define WL1251_ACX_INTR_TRACE_B BIT(8)
+
+/* Command processing completion */
+#define WL1251_ACX_INTR_CMD_COMPLETE BIT(9)
+
+/* Init sequence is done */
+#define WL1251_ACX_INTR_INIT_COMPLETE BIT(14)
+
+#define WL1251_ACX_INTR_ALL 0xFFFFFFFF
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
new file mode 100644
index 00000000000..48641437414
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -0,0 +1,409 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (c) 1998-2007 Texas Instruments Incorporated
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL12XX_H__
+#define __WL12XX_H__
+
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <net/mac80211.h>
+
+#define DRIVER_NAME "wl12xx"
+#define DRIVER_PREFIX DRIVER_NAME ": "
+
+enum {
+ DEBUG_NONE = 0,
+ DEBUG_IRQ = BIT(0),
+ DEBUG_SPI = BIT(1),
+ DEBUG_BOOT = BIT(2),
+ DEBUG_MAILBOX = BIT(3),
+ DEBUG_NETLINK = BIT(4),
+ DEBUG_EVENT = BIT(5),
+ DEBUG_TX = BIT(6),
+ DEBUG_RX = BIT(7),
+ DEBUG_SCAN = BIT(8),
+ DEBUG_CRYPT = BIT(9),
+ DEBUG_PSM = BIT(10),
+ DEBUG_MAC80211 = BIT(11),
+ DEBUG_CMD = BIT(12),
+ DEBUG_ACX = BIT(13),
+ DEBUG_ALL = ~0,
+};
+
+#define DEBUG_LEVEL (DEBUG_NONE)
+
+#define DEBUG_DUMP_LIMIT 1024
+
+#define wl12xx_error(fmt, arg...) \
+ printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
+
+#define wl12xx_warning(fmt, arg...) \
+ printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
+
+#define wl12xx_notice(fmt, arg...) \
+ printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl12xx_info(fmt, arg...) \
+ printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg)
+
+#define wl12xx_debug(level, fmt, arg...) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
+ } while (0)
+
+#define wl12xx_dump(level, prefix, buf, len) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+ DUMP_PREFIX_OFFSET, 16, 1, \
+ buf, \
+ min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+ 0); \
+ } while (0)
+
+#define wl12xx_dump_ascii(level, prefix, buf, len) \
+ do { \
+ if (level & DEBUG_LEVEL) \
+ print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
+ DUMP_PREFIX_OFFSET, 16, 1, \
+ buf, \
+ min_t(size_t, len, DEBUG_DUMP_LIMIT), \
+ true); \
+ } while (0)
+
+#define WL12XX_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN | \
+ CFG_BSSID_FILTER_EN)
+
+#define WL12XX_DEFAULT_RX_FILTER (CFG_RX_PRSP_EN | \
+ CFG_RX_MGMT_EN | \
+ CFG_RX_DATA_EN | \
+ CFG_RX_CTL_EN | \
+ CFG_RX_BCN_EN | \
+ CFG_RX_AUTH_EN | \
+ CFG_RX_ASSOC_EN)
+
+
+struct boot_attr {
+ u32 radio_type;
+ u8 mac_clock;
+ u8 arm_clock;
+ int firmware_debug;
+ u32 minor;
+ u32 major;
+ u32 bugfix;
+};
+
+enum wl12xx_state {
+ WL12XX_STATE_OFF,
+ WL12XX_STATE_ON,
+ WL12XX_STATE_PLT,
+};
+
+enum wl12xx_partition_type {
+ PART_DOWN,
+ PART_WORK,
+ PART_DRPW,
+
+ PART_TABLE_LEN
+};
+
+struct wl12xx_partition {
+ u32 size;
+ u32 start;
+};
+
+struct wl12xx_partition_set {
+ struct wl12xx_partition mem;
+ struct wl12xx_partition reg;
+};
+
+struct wl12xx;
+
+/* FIXME: I'm not sure about this structure name */
+struct wl12xx_chip {
+ u32 id;
+
+ const char *fw_filename;
+ const char *nvs_filename;
+
+ char fw_ver[21];
+
+ unsigned int power_on_sleep;
+ int intr_cmd_complete;
+ int intr_init_complete;
+
+ int (*op_upload_fw)(struct wl12xx *wl);
+ int (*op_upload_nvs)(struct wl12xx *wl);
+ int (*op_boot)(struct wl12xx *wl);
+ void (*op_set_ecpu_ctrl)(struct wl12xx *wl, u32 flag);
+ void (*op_target_enable_interrupts)(struct wl12xx *wl);
+ int (*op_hw_init)(struct wl12xx *wl);
+ int (*op_plt_init)(struct wl12xx *wl);
+
+ struct wl12xx_partition_set *p_table;
+ enum wl12xx_acx_int_reg *acx_reg_table;
+};
+
+struct wl12xx_stats {
+ struct acx_statistics *fw_stats;
+ unsigned long fw_stats_update;
+
+ unsigned int retry_count;
+ unsigned int excessive_retries;
+};
+
+struct wl12xx_debugfs {
+ struct dentry *rootdir;
+ struct dentry *fw_statistics;
+
+ struct dentry *tx_internal_desc_overflow;
+
+ struct dentry *rx_out_of_mem;
+ struct dentry *rx_hdr_overflow;
+ struct dentry *rx_hw_stuck;
+ struct dentry *rx_dropped;
+ struct dentry *rx_fcs_err;
+ struct dentry *rx_xfr_hint_trig;
+ struct dentry *rx_path_reset;
+ struct dentry *rx_reset_counter;
+
+ struct dentry *dma_rx_requested;
+ struct dentry *dma_rx_errors;
+ struct dentry *dma_tx_requested;
+ struct dentry *dma_tx_errors;
+
+ struct dentry *isr_cmd_cmplt;
+ struct dentry *isr_fiqs;
+ struct dentry *isr_rx_headers;
+ struct dentry *isr_rx_mem_overflow;
+ struct dentry *isr_rx_rdys;
+ struct dentry *isr_irqs;
+ struct dentry *isr_tx_procs;
+ struct dentry *isr_decrypt_done;
+ struct dentry *isr_dma0_done;
+ struct dentry *isr_dma1_done;
+ struct dentry *isr_tx_exch_complete;
+ struct dentry *isr_commands;
+ struct dentry *isr_rx_procs;
+ struct dentry *isr_hw_pm_mode_changes;
+ struct dentry *isr_host_acknowledges;
+ struct dentry *isr_pci_pm;
+ struct dentry *isr_wakeups;
+ struct dentry *isr_low_rssi;
+
+ struct dentry *wep_addr_key_count;
+ struct dentry *wep_default_key_count;
+ /* skipping wep.reserved */
+ struct dentry *wep_key_not_found;
+ struct dentry *wep_decrypt_fail;
+ struct dentry *wep_packets;
+ struct dentry *wep_interrupt;
+
+ struct dentry *pwr_ps_enter;
+ struct dentry *pwr_elp_enter;
+ struct dentry *pwr_missing_bcns;
+ struct dentry *pwr_wake_on_host;
+ struct dentry *pwr_wake_on_timer_exp;
+ struct dentry *pwr_tx_with_ps;
+ struct dentry *pwr_tx_without_ps;
+ struct dentry *pwr_rcvd_beacons;
+ struct dentry *pwr_power_save_off;
+ struct dentry *pwr_enable_ps;
+ struct dentry *pwr_disable_ps;
+ struct dentry *pwr_fix_tsf_ps;
+ /* skipping cont_miss_bcns_spread for now */
+ struct dentry *pwr_rcvd_awake_beacons;
+
+ struct dentry *mic_rx_pkts;
+ struct dentry *mic_calc_failure;
+
+ struct dentry *aes_encrypt_fail;
+ struct dentry *aes_decrypt_fail;
+ struct dentry *aes_encrypt_packets;
+ struct dentry *aes_decrypt_packets;
+ struct dentry *aes_encrypt_interrupt;
+ struct dentry *aes_decrypt_interrupt;
+
+ struct dentry *event_heart_beat;
+ struct dentry *event_calibration;
+ struct dentry *event_rx_mismatch;
+ struct dentry *event_rx_mem_empty;
+ struct dentry *event_rx_pool;
+ struct dentry *event_oom_late;
+ struct dentry *event_phy_transmit_error;
+ struct dentry *event_tx_stuck;
+
+ struct dentry *ps_pspoll_timeouts;
+ struct dentry *ps_upsd_timeouts;
+ struct dentry *ps_upsd_max_sptime;
+ struct dentry *ps_upsd_max_apturn;
+ struct dentry *ps_pspoll_max_apturn;
+ struct dentry *ps_pspoll_utilization;
+ struct dentry *ps_upsd_utilization;
+
+ struct dentry *rxpipe_rx_prep_beacon_drop;
+ struct dentry *rxpipe_descr_host_int_trig_rx_data;
+ struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data;
+ struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data;
+ struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data;
+
+ struct dentry *tx_queue_len;
+
+ struct dentry *retry_count;
+ struct dentry *excessive_retries;
+};
+
+struct wl12xx {
+ struct ieee80211_hw *hw;
+ bool mac80211_registered;
+
+ struct spi_device *spi;
+
+ void (*set_power)(bool enable);
+ int irq;
+
+ enum wl12xx_state state;
+ struct mutex mutex;
+
+ int physical_mem_addr;
+ int physical_reg_addr;
+ int virtual_mem_addr;
+ int virtual_reg_addr;
+
+ struct wl12xx_chip chip;
+
+ int cmd_box_addr;
+ int event_box_addr;
+ struct boot_attr boot_attr;
+
+ u8 *fw;
+ size_t fw_len;
+ u8 *nvs;
+ size_t nvs_len;
+
+ u8 bssid[ETH_ALEN];
+ u8 mac_addr[ETH_ALEN];
+ u8 bss_type;
+ u8 listen_int;
+ int channel;
+
+ void *target_mem_map;
+ struct acx_data_path_params_resp *data_path;
+
+ /* Number of TX packets transferred to the FW, modulo 16 */
+ u32 data_in_count;
+
+ /* Frames scheduled for transmission, not handled yet */
+ struct sk_buff_head tx_queue;
+ bool tx_queue_stopped;
+
+ struct work_struct tx_work;
+ struct work_struct filter_work;
+
+ /* Pending TX frames */
+ struct sk_buff *tx_frames[16];
+
+ /*
+ * Index pointing to the next TX complete entry
+ * in the cyclic XT complete array we get from
+ * the FW.
+ */
+ u32 next_tx_complete;
+
+ /* FW Rx counter */
+ u32 rx_counter;
+
+ /* Rx frames handled */
+ u32 rx_handled;
+
+ /* Current double buffer */
+ u32 rx_current_buffer;
+ u32 rx_last_id;
+
+ /* The target interrupt mask */
+ u32 intr_mask;
+ struct work_struct irq_work;
+
+ /* The mbox event mask */
+ u32 event_mask;
+
+ /* Mailbox pointers */
+ u32 mbox_ptr[2];
+
+ /* Are we currently scanning */
+ bool scanning;
+
+ /* Our association ID */
+ u16 aid;
+
+ /* Default key (for WEP) */
+ u32 default_key;
+
+ unsigned int tx_mgmt_frm_rate;
+ unsigned int tx_mgmt_frm_mod;
+
+ unsigned int rx_config;
+ unsigned int rx_filter;
+
+ /* is firmware in elp mode */
+ bool elp;
+
+ /* we can be in psm, but not in elp, we have to differentiate */
+ bool psm;
+
+ /* PSM mode requested */
+ bool psm_requested;
+
+ /* in dBm */
+ int power_level;
+
+ struct wl12xx_stats stats;
+ struct wl12xx_debugfs debugfs;
+};
+
+int wl12xx_plt_start(struct wl12xx *wl);
+int wl12xx_plt_stop(struct wl12xx *wl);
+
+#define DEFAULT_HW_GEN_MODULATION_TYPE CCK_LONG /* Long Preamble */
+#define DEFAULT_HW_GEN_TX_RATE RATE_2MBPS
+#define JOIN_TIMEOUT 5000 /* 5000 milliseconds to join */
+
+#define WL12XX_DEFAULT_POWER_LEVEL 20
+
+#define WL12XX_TX_QUEUE_MAX_LENGTH 20
+
+/* Different chips need different sleep times after power on. WL1271 needs
+ * 200ms, WL1251 needs only 10ms. By default we use 200ms, but as soon as we
+ * know the chip ID, we change the sleep value in the wl12xx chip structure,
+ * so in subsequent power ons, we don't waste more time then needed. */
+#define WL12XX_DEFAULT_POWER_ON_SLEEP 200
+
+#define CHIP_ID_1251_PG10 (0x7010101)
+#define CHIP_ID_1251_PG11 (0x7020101)
+#define CHIP_ID_1251_PG12 (0x7030101)
+#define CHIP_ID_1271_PG10 (0x4030101)
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl12xx_80211.h b/drivers/net/wireless/wl12xx/wl12xx_80211.h
new file mode 100644
index 00000000000..657c2dbcb7d
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl12xx_80211.h
@@ -0,0 +1,156 @@
+#ifndef __WL12XX_80211_H__
+#define __WL12XX_80211_H__
+
+#include <linux/if_ether.h> /* ETH_ALEN */
+
+/* RATES */
+#define IEEE80211_CCK_RATE_1MB 0x02
+#define IEEE80211_CCK_RATE_2MB 0x04
+#define IEEE80211_CCK_RATE_5MB 0x0B
+#define IEEE80211_CCK_RATE_11MB 0x16
+#define IEEE80211_OFDM_RATE_6MB 0x0C
+#define IEEE80211_OFDM_RATE_9MB 0x12
+#define IEEE80211_OFDM_RATE_12MB 0x18
+#define IEEE80211_OFDM_RATE_18MB 0x24
+#define IEEE80211_OFDM_RATE_24MB 0x30
+#define IEEE80211_OFDM_RATE_36MB 0x48
+#define IEEE80211_OFDM_RATE_48MB 0x60
+#define IEEE80211_OFDM_RATE_54MB 0x6C
+#define IEEE80211_BASIC_RATE_MASK 0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
+
+#define IEEE80211_CCK_RATES_MASK 0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
+ IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
+ IEEE80211_CCK_RATE_5MB_MASK | \
+ IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK 0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
+ IEEE80211_OFDM_RATE_12MB_MASK | \
+ IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
+ IEEE80211_OFDM_RATE_9MB_MASK | \
+ IEEE80211_OFDM_RATE_18MB_MASK | \
+ IEEE80211_OFDM_RATE_36MB_MASK | \
+ IEEE80211_OFDM_RATE_48MB_MASK | \
+ IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+ IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+
+/* This really should be 8, but not for our firmware */
+#define MAX_SUPPORTED_RATES 32
+#define COUNTRY_STRING_LEN 3
+#define MAX_COUNTRY_TRIPLETS 32
+
+/* Headers */
+struct ieee80211_header {
+ __le16 frame_ctl;
+ __le16 duration_id;
+ u8 da[ETH_ALEN];
+ u8 sa[ETH_ALEN];
+ u8 bssid[ETH_ALEN];
+ __le16 seq_ctl;
+ u8 payload[0];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_header {
+ u8 id;
+ u8 len;
+} __attribute__ ((packed));
+
+/* IEs */
+
+struct wl12xx_ie_ssid {
+ struct wl12xx_ie_header header;
+ char ssid[IW_ESSID_MAX_SIZE];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_rates {
+ struct wl12xx_ie_header header;
+ u8 rates[MAX_SUPPORTED_RATES];
+} __attribute__ ((packed));
+
+struct wl12xx_ie_ds_params {
+ struct wl12xx_ie_header header;
+ u8 channel;
+} __attribute__ ((packed));
+
+struct country_triplet {
+ u8 channel;
+ u8 num_channels;
+ u8 max_tx_power;
+} __attribute__ ((packed));
+
+struct wl12xx_ie_country {
+ struct wl12xx_ie_header header;
+ u8 country_string[COUNTRY_STRING_LEN];
+ struct country_triplet triplets[MAX_COUNTRY_TRIPLETS];
+} __attribute__ ((packed));
+
+
+/* Templates */
+
+struct wl12xx_beacon_template {
+ struct ieee80211_header header;
+ __le32 time_stamp[2];
+ __le16 beacon_interval;
+ __le16 capability;
+ struct wl12xx_ie_ssid ssid;
+ struct wl12xx_ie_rates rates;
+ struct wl12xx_ie_rates ext_rates;
+ struct wl12xx_ie_ds_params ds_params;
+ struct wl12xx_ie_country country;
+} __attribute__ ((packed));
+
+struct wl12xx_null_data_template {
+ struct ieee80211_header header;
+} __attribute__ ((packed));
+
+struct wl12xx_ps_poll_template {
+ u16 fc;
+ u16 aid;
+ u8 bssid[ETH_ALEN];
+ u8 ta[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct wl12xx_qos_null_data_template {
+ struct ieee80211_header header;
+ __le16 qos_ctl;
+} __attribute__ ((packed));
+
+struct wl12xx_probe_req_template {
+ struct ieee80211_header header;
+ struct wl12xx_ie_ssid ssid;
+ struct wl12xx_ie_rates rates;
+ struct wl12xx_ie_rates ext_rates;
+} __attribute__ ((packed));
+
+
+struct wl12xx_probe_resp_template {
+ struct ieee80211_header header;
+ __le32 time_stamp[2];
+ __le16 beacon_interval;
+ __le16 capability;
+ struct wl12xx_ie_ssid ssid;
+ struct wl12xx_ie_rates rates;
+ struct wl12xx_ie_rates ext_rates;
+ struct wl12xx_ie_ds_params ds_params;
+ struct wl12xx_ie_country country;
+} __attribute__ ((packed));
+
+#endif
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index c3a51266de2..6bdb1704083 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -755,52 +755,6 @@ static int zd_op_config(struct ieee80211_hw *hw, u32 changed)
return zd_chip_set_channel(&mac->chip, conf->channel->hw_value);
}
-static int zd_op_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct zd_mac *mac = zd_hw_mac(hw);
- int associated;
- int r;
-
- if (mac->type == NL80211_IFTYPE_MESH_POINT ||
- mac->type == NL80211_IFTYPE_ADHOC) {
- associated = true;
- if (conf->changed & IEEE80211_IFCC_BEACON) {
- struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
-
- if (!beacon)
- return -ENOMEM;
- r = zd_mac_config_beacon(hw, beacon);
- kfree_skb(beacon);
-
- if (r < 0)
- return r;
- }
-
- if (conf->changed & IEEE80211_IFCC_BEACON_ENABLED) {
- u32 interval;
-
- if (conf->enable_beacon)
- interval = BCN_MODE_IBSS | hw->conf.beacon_int;
- else
- interval = 0;
-
- r = zd_set_beacon_interval(&mac->chip, interval);
- if (r < 0)
- return r;
- }
- } else
- associated = is_valid_ether_addr(conf->bssid);
-
- spin_lock_irq(&mac->lock);
- mac->associated = associated;
- spin_unlock_irq(&mac->lock);
-
- /* TODO: do hardware bssid filtering */
- return 0;
-}
-
static void zd_process_intr(struct work_struct *work)
{
u16 int_status;
@@ -923,9 +877,42 @@ static void zd_op_bss_info_changed(struct ieee80211_hw *hw,
{
struct zd_mac *mac = zd_hw_mac(hw);
unsigned long flags;
+ int associated;
dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes);
+ if (mac->type == NL80211_IFTYPE_MESH_POINT ||
+ mac->type == NL80211_IFTYPE_ADHOC) {
+ associated = true;
+ if (changes & BSS_CHANGED_BEACON) {
+ struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+ if (beacon) {
+ zd_mac_config_beacon(hw, beacon);
+ kfree_skb(beacon);
+ }
+ }
+
+ if (changes & BSS_CHANGED_BEACON_ENABLED) {
+ u32 interval;
+
+ if (bss_conf->enable_beacon)
+ interval = BCN_MODE_IBSS |
+ bss_conf->beacon_int;
+ else
+ interval = 0;
+
+ zd_set_beacon_interval(&mac->chip, interval);
+ }
+ } else
+ associated = is_valid_ether_addr(bss_conf->bssid);
+
+ spin_lock_irq(&mac->lock);
+ mac->associated = associated;
+ spin_unlock_irq(&mac->lock);
+
+ /* TODO: do hardware bssid filtering */
+
if (changes & BSS_CHANGED_ERP_PREAMBLE) {
spin_lock_irqsave(&mac->lock, flags);
mac->short_preamble = bss_conf->use_short_preamble;
@@ -952,7 +939,6 @@ static const struct ieee80211_ops zd_ops = {
.add_interface = zd_op_add_interface,
.remove_interface = zd_op_remove_interface,
.config = zd_op_config,
- .config_interface = zd_op_config_interface,
.configure_filter = zd_op_configure_filter,
.bss_info_changed = zd_op_bss_info_changed,
.get_tsf = zd_op_get_tsf,
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index c52e7fba4e4..dc92359f37e 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -543,7 +543,7 @@ struct ieee80211_tim_ie {
u8 virtual_map[1];
} __attribute__ ((packed));
-#define WLAN_SA_QUERY_TR_ID_LEN 16
+#define WLAN_SA_QUERY_TR_ID_LEN 2
struct ieee80211_mgmt {
__le16 frame_control;
diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h
new file mode 100644
index 00000000000..11430cab2aa
--- /dev/null
+++ b/include/linux/spi/wl12xx.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of wl12xx
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Kalle Valo <kalle.valo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef _LINUX_SPI_WL12XX_H
+#define _LINUX_SPI_WL12XX_H
+
+struct wl12xx_platform_data {
+ void (*set_power)(bool enable);
+};
+
+#endif
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 446dbf75a1c..38dc1cd1027 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -149,6 +149,13 @@ struct ieee80211_low_level_stats {
* @BSS_CHANGED_ERP_SLOT: slot timing changed
* @BSS_CHANGED_HT: 802.11n parameters changed
* @BSS_CHANGED_BASIC_RATES: Basic rateset changed
+ * @BSS_CHANGED_BEACON_INT: Beacon interval changed
+ * @BSS_CHANGED_BSSID: BSSID changed, for whatever
+ * reason (IBSS and managed mode)
+ * @BSS_CHANGED_BEACON: Beacon data changed, retrieve
+ * new beacon (beaconing modes)
+ * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be
+ * enabled/disabled (beaconing modes)
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -157,6 +164,10 @@ enum ieee80211_bss_change {
BSS_CHANGED_ERP_SLOT = 1<<3,
BSS_CHANGED_HT = 1<<4,
BSS_CHANGED_BASIC_RATES = 1<<5,
+ BSS_CHANGED_BEACON_INT = 1<<6,
+ BSS_CHANGED_BSSID = 1<<7,
+ BSS_CHANGED_BEACON = 1<<8,
+ BSS_CHANGED_BEACON_ENABLED = 1<<9,
};
/**
@@ -190,8 +201,11 @@ struct ieee80211_bss_ht_conf {
* @basic_rates: bitmap of basic rates, each bit stands for an
* index into the rate table configured by the driver in
* the current band.
+ * @bssid: The BSSID for this BSS
+ * @enable_beacon: whether beaconing should be enabled or not
*/
struct ieee80211_bss_conf {
+ const u8 *bssid;
/* association related data */
bool assoc;
u16 aid;
@@ -199,6 +213,7 @@ struct ieee80211_bss_conf {
bool use_cts_prot;
bool use_short_preamble;
bool use_short_slot;
+ bool enable_beacon;
u8 dtim_period;
u16 beacon_int;
u16 assoc_capability;
@@ -518,10 +533,16 @@ struct ieee80211_rx_status {
*
* @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
* @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only)
+ * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set
+ * the driver should be prepared to handle configuration requests but
+ * may turn the device off as much as possible. Typically, this flag will
+ * be set when an interface is set UP but not associated or scanning, but
+ * it can also be unset in that case when monitor interfaces are active.
*/
enum ieee80211_conf_flags {
IEEE80211_CONF_RADIOTAP = (1<<0),
IEEE80211_CONF_PS = (1<<1),
+ IEEE80211_CONF_IDLE = (1<<2),
};
@@ -529,25 +550,35 @@ enum ieee80211_conf_flags {
* enum ieee80211_conf_changed - denotes which configuration changed
*
* @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed
- * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed
+ * @_IEEE80211_CONF_CHANGE_BEACON_INTERVAL: DEPRECATED
* @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
* @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
* @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
* @IEEE80211_CONF_CHANGE_POWER: the TX power changed
* @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
* @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
+ * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
*/
enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0),
- IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1),
+ _IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1),
IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3),
IEEE80211_CONF_CHANGE_PS = BIT(4),
IEEE80211_CONF_CHANGE_POWER = BIT(5),
IEEE80211_CONF_CHANGE_CHANNEL = BIT(6),
IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7),
+ IEEE80211_CONF_CHANGE_IDLE = BIT(8),
};
+static inline __deprecated enum ieee80211_conf_changed
+__IEEE80211_CONF_CHANGE_BEACON_INTERVAL(void)
+{
+ return _IEEE80211_CONF_CHANGE_BEACON_INTERVAL;
+}
+#define IEEE80211_CONF_CHANGE_BEACON_INTERVAL \
+ __IEEE80211_CONF_CHANGE_BEACON_INTERVAL()
+
/**
* struct ieee80211_conf - configuration of the device
*
@@ -559,7 +590,7 @@ enum ieee80211_conf_changed {
* @beacon_int: beacon interval (TODO make interface config)
*
* @listen_interval: listen interval in units of beacon interval
- * @max_sleep_interval: the maximum number of beacon intervals to sleep for
+ * @max_sleep_period: the maximum number of beacon intervals to sleep for
* before checking the beacon for a TIM bit (managed mode only); this
* value will be only achievable between DTIM frames, the hardware
* needs to check for the multicast traffic bit in DTIM beacons.
@@ -584,7 +615,7 @@ struct ieee80211_conf {
int beacon_int;
u32 flags;
int power_level, dynamic_ps_timeout;
- int max_sleep_interval;
+ int max_sleep_period;
u16 listen_interval;
bool radio_enabled;
@@ -650,37 +681,6 @@ struct ieee80211_if_init_conf {
};
/**
- * enum ieee80211_if_conf_change - interface config change flags
- *
- * @IEEE80211_IFCC_BSSID: The BSSID changed.
- * @IEEE80211_IFCC_BEACON: The beacon for this interface changed
- * (currently AP and MESH only), use ieee80211_beacon_get().
- * @IEEE80211_IFCC_BEACON_ENABLED: The enable_beacon value changed.
- */
-enum ieee80211_if_conf_change {
- IEEE80211_IFCC_BSSID = BIT(0),
- IEEE80211_IFCC_BEACON = BIT(1),
- IEEE80211_IFCC_BEACON_ENABLED = BIT(2),
-};
-
-/**
- * struct ieee80211_if_conf - configuration of an interface
- *
- * @changed: parameters that have changed, see &enum ieee80211_if_conf_change.
- * @bssid: BSSID of the network we are associated to/creating.
- * @enable_beacon: Indicates whether beacons can be sent.
- * This is valid only for AP/IBSS/MESH modes.
- *
- * This structure is passed to the config_interface() callback of
- * &struct ieee80211_hw.
- */
-struct ieee80211_if_conf {
- u32 changed;
- const u8 *bssid;
- bool enable_beacon;
-};
-
-/**
* enum ieee80211_key_alg - key algorithm
* @ALG_WEP: WEP40 or WEP104
* @ALG_TKIP: TKIP
@@ -1348,10 +1348,6 @@ enum ieee80211_ampdu_mlme_action {
* This function should never fail but returns a negative error code
* if it does.
*
- * @config_interface: Handler for configuration requests related to interfaces
- * (e.g. BSSID changes.)
- * Returns a negative error code which will be seen in userspace.
- *
* @bss_info_changed: Handler for configuration requests related to BSS
* parameters that may vary during BSS's lifespan, and may affect low
* level driver (e.g. assoc/disassoc status, erp parameters).
@@ -1453,9 +1449,6 @@ struct ieee80211_ops {
void (*remove_interface)(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
int (*config)(struct ieee80211_hw *hw, u32 changed);
- int (*config_interface)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf);
void (*bss_info_changed)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info,
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 07656d830bc..bc064d7933f 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -16,12 +16,12 @@
#include <linux/ieee80211.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
u16 initiator, u16 reason)
{
struct ieee80211_local *local = sta->local;
- struct ieee80211_hw *hw = &local->hw;
int i;
/* check if TID is in operational state */
@@ -41,8 +41,8 @@ void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
sta->sta.addr, tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
- if (local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_STOP,
- &sta->sta, tid, NULL))
+ if (drv_ampdu_action(local, IEEE80211_AMPDU_RX_STOP,
+ &sta->sta, tid, NULL))
printk(KERN_DEBUG "HW problem - can not stop rx "
"aggregation for tid %d\n", tid);
@@ -68,6 +68,7 @@ void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
spin_lock_bh(&sta->lock);
/* free resources */
kfree(sta->ampdu_mlme.tid_rx[tid]->reorder_buf);
+ kfree(sta->ampdu_mlme.tid_rx[tid]->reorder_time);
if (!sta->ampdu_mlme.tid_rx[tid]->shutdown) {
kfree(sta->ampdu_mlme.tid_rx[tid]);
@@ -268,19 +269,23 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
/* prepare reordering buffer */
tid_agg_rx->reorder_buf =
kcalloc(buf_size, sizeof(struct sk_buff *), GFP_ATOMIC);
- if (!tid_agg_rx->reorder_buf) {
+ tid_agg_rx->reorder_time =
+ kcalloc(buf_size, sizeof(unsigned long), GFP_ATOMIC);
+ if (!tid_agg_rx->reorder_buf || !tid_agg_rx->reorder_time) {
#ifdef CONFIG_MAC80211_HT_DEBUG
if (net_ratelimit())
printk(KERN_ERR "can not allocate reordering buffer "
"to tid %d\n", tid);
#endif
+ kfree(tid_agg_rx->reorder_buf);
+ kfree(tid_agg_rx->reorder_time);
kfree(sta->ampdu_mlme.tid_rx[tid]);
+ sta->ampdu_mlme.tid_rx[tid] = NULL;
goto end;
}
- if (local->ops->ampdu_action)
- ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
- &sta->sta, tid, &start_seq_num);
+ ret = drv_ampdu_action(local, IEEE80211_AMPDU_RX_START,
+ &sta->sta, tid, &start_seq_num);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Rx A-MPDU request on tid %d result %d\n", tid, ret);
#endif /* CONFIG_MAC80211_HT_DEBUG */
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index 947aaaad35d..43d00ffd398 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -16,6 +16,7 @@
#include <linux/ieee80211.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "wme.h"
/**
@@ -134,8 +135,8 @@ static int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
*state = HT_AGG_STATE_REQ_STOP_BA_MSK |
(initiator << HT_AGG_STATE_INITIATOR_SHIFT);
- ret = local->ops->ampdu_action(&local->hw, IEEE80211_AMPDU_TX_STOP,
- &sta->sta, tid, NULL);
+ ret = drv_ampdu_action(local, IEEE80211_AMPDU_TX_STOP,
+ &sta->sta, tid, NULL);
/* HW shall not deny going back to legacy */
if (WARN_ON(ret)) {
@@ -306,8 +307,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
start_seq_num = sta->tid_seq[tid];
- ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START,
- &sta->sta, tid, &start_seq_num);
+ ret = drv_ampdu_action(local, IEEE80211_AMPDU_TX_START,
+ &sta->sta, tid, &start_seq_num);
if (ret) {
#ifdef CONFIG_MAC80211_HT_DEBUG
@@ -418,8 +419,8 @@ static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
ieee80211_agg_splice_finish(local, sta, tid);
spin_unlock(&local->ampdu_lock);
- local->ops->ampdu_action(&local->hw, IEEE80211_AMPDU_TX_OPERATIONAL,
- &sta->sta, tid, NULL);
+ drv_ampdu_action(local, IEEE80211_AMPDU_TX_OPERATIONAL,
+ &sta->sta, tid, NULL);
}
void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 5e1c230744b..d0ca6da33ca 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -13,6 +13,7 @@
#include <linux/rcupdate.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "cfg.h"
#include "rate.h"
#include "mesh.h"
@@ -245,12 +246,10 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
iv32 = key->u.tkip.tx.iv32;
iv16 = key->u.tkip.tx.iv16;
- if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE &&
- sdata->local->ops->get_tkip_seq)
- sdata->local->ops->get_tkip_seq(
- local_to_hw(sdata->local),
- key->conf.hw_key_idx,
- &iv32, &iv16);
+ if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)
+ drv_get_tkip_seq(sdata->local,
+ key->conf.hw_key_idx,
+ &iv32, &iv16);
seq[0] = iv16 & 0xff;
seq[1] = (iv16 >> 8) & 0xff;
@@ -451,18 +450,11 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
* This is a kludge. beacon interval should really be part
* of the beacon information.
*/
- if (params->interval && (sdata->local->hw.conf.beacon_int !=
- params->interval)) {
- sdata->local->hw.conf.beacon_int = params->interval;
- err = ieee80211_hw_config(sdata->local,
- IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
- if (err < 0)
- return err;
- /*
- * We updated some parameter so if below bails out
- * it's not an error.
- */
- err = 0;
+ if (params->interval &&
+ (sdata->vif.bss_conf.beacon_int != params->interval)) {
+ sdata->vif.bss_conf.beacon_int = params->interval;
+ ieee80211_bss_info_change_notify(sdata,
+ BSS_CHANGED_BEACON_INT);
}
/* Need to have a beacon head if we don't have one yet */
@@ -528,8 +520,9 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
kfree(old);
- return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON |
- IEEE80211_IFCC_BEACON_ENABLED);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED |
+ BSS_CHANGED_BEACON);
+ return 0;
}
static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
@@ -580,7 +573,8 @@ static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
synchronize_rcu();
kfree(old);
- return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON_ENABLED);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
+ return 0;
}
/* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */
@@ -1120,7 +1114,7 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy,
p.cw_max = params->cwmax;
p.cw_min = params->cwmin;
p.txop = params->txop;
- if (local->ops->conf_tx(local_to_hw(local), params->queue, &p)) {
+ if (drv_conf_tx(local, params->queue, &p)) {
printk(KERN_DEBUG "%s: failed to set TX queue "
"parameters for queue %d\n", local->mdev->name,
params->queue);
@@ -1301,16 +1295,13 @@ static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
+ int err;
if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
- int err;
+ err = drv_set_rts_threshold(local, wiphy->rts_threshold);
- if (local->ops->set_rts_threshold) {
- err = local->ops->set_rts_threshold(
- local_to_hw(local), wiphy->rts_threshold);
- if (err)
- return err;
- }
+ if (err)
+ return err;
}
if (changed & WIPHY_PARAM_RETRY_SHORT)
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 5001328be46..ac793201b70 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -10,6 +10,7 @@
#include <linux/debugfs.h>
#include <linux/rtnetlink.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "rate.h"
#include "debugfs.h"
@@ -70,11 +71,10 @@ static ssize_t tsf_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
- u64 tsf = 0;
+ u64 tsf;
char buf[100];
- if (local->ops->get_tsf)
- tsf = local->ops->get_tsf(local_to_hw(local));
+ tsf = drv_get_tsf(local);
snprintf(buf, sizeof(buf), "0x%016llx\n", (unsigned long long) tsf);
@@ -97,13 +97,13 @@ static ssize_t tsf_write(struct file *file,
if (strncmp(buf, "reset", 5) == 0) {
if (local->ops->reset_tsf) {
- local->ops->reset_tsf(local_to_hw(local));
+ drv_reset_tsf(local);
printk(KERN_INFO "%s: debugfs reset TSF\n", wiphy_name(local->hw.wiphy));
}
} else {
tsf = simple_strtoul(buf, NULL, 0);
if (local->ops->set_tsf) {
- local->ops->set_tsf(local_to_hw(local), tsf);
+ drv_set_tsf(local, tsf);
printk(KERN_INFO "%s: debugfs set TSF to %#018llx\n", wiphy_name(local->hw.wiphy), tsf);
}
}
@@ -150,14 +150,12 @@ static ssize_t format_devstat_counter(struct ieee80211_local *local,
char buf[20];
int res;
- if (!local->ops->get_stats)
- return -EOPNOTSUPP;
-
rtnl_lock();
- res = local->ops->get_stats(local_to_hw(local), &stats);
+ res = drv_get_stats(local, &stats);
rtnl_unlock();
- if (!res)
- res = printvalue(&stats, buf, sizeof(buf));
+ if (res)
+ return res;
+ res = printvalue(&stats, buf, sizeof(buf));
return simple_read_from_buffer(userbuf, count, ppos, buf, res);
}
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
new file mode 100644
index 00000000000..3912b5334b9
--- /dev/null
+++ b/net/mac80211/driver-ops.h
@@ -0,0 +1,184 @@
+#ifndef __MAC80211_DRIVER_OPS
+#define __MAC80211_DRIVER_OPS
+
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+
+static inline int drv_tx(struct ieee80211_local *local, struct sk_buff *skb)
+{
+ return local->ops->tx(&local->hw, skb);
+}
+
+static inline int drv_start(struct ieee80211_local *local)
+{
+ return local->ops->start(&local->hw);
+}
+
+static inline void drv_stop(struct ieee80211_local *local)
+{
+ local->ops->stop(&local->hw);
+}
+
+static inline int drv_add_interface(struct ieee80211_local *local,
+ struct ieee80211_if_init_conf *conf)
+{
+ return local->ops->add_interface(&local->hw, conf);
+}
+
+static inline void drv_remove_interface(struct ieee80211_local *local,
+ struct ieee80211_if_init_conf *conf)
+{
+ local->ops->remove_interface(&local->hw, conf);
+}
+
+static inline int drv_config(struct ieee80211_local *local, u32 changed)
+{
+ return local->ops->config(&local->hw, changed);
+}
+
+static inline void drv_bss_info_changed(struct ieee80211_local *local,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *info,
+ u32 changed)
+{
+ if (local->ops->bss_info_changed)
+ local->ops->bss_info_changed(&local->hw, vif, info, changed);
+}
+
+static inline void drv_configure_filter(struct ieee80211_local *local,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ local->ops->configure_filter(&local->hw, changed_flags, total_flags,
+ mc_count, mc_list);
+}
+
+static inline int drv_set_tim(struct ieee80211_local *local,
+ struct ieee80211_sta *sta, bool set)
+{
+ if (local->ops->set_tim)
+ return local->ops->set_tim(&local->hw, sta, set);
+ return 0;
+}
+
+static inline int drv_set_key(struct ieee80211_local *local,
+ enum set_key_cmd cmd, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ return local->ops->set_key(&local->hw, cmd, vif, sta, key);
+}
+
+static inline void drv_update_tkip_key(struct ieee80211_local *local,
+ struct ieee80211_key_conf *conf,
+ const u8 *address, u32 iv32,
+ u16 *phase1key)
+{
+ if (local->ops->update_tkip_key)
+ local->ops->update_tkip_key(&local->hw, conf, address,
+ iv32, phase1key);
+}
+
+static inline int drv_hw_scan(struct ieee80211_local *local,
+ struct cfg80211_scan_request *req)
+{
+ return local->ops->hw_scan(&local->hw, req);
+}
+
+static inline void drv_sw_scan_start(struct ieee80211_local *local)
+{
+ if (local->ops->sw_scan_start)
+ local->ops->sw_scan_start(&local->hw);
+}
+
+static inline void drv_sw_scan_complete(struct ieee80211_local *local)
+{
+ if (local->ops->sw_scan_complete)
+ local->ops->sw_scan_complete(&local->hw);
+}
+
+static inline int drv_get_stats(struct ieee80211_local *local,
+ struct ieee80211_low_level_stats *stats)
+{
+ if (!local->ops->get_stats)
+ return -EOPNOTSUPP;
+ return local->ops->get_stats(&local->hw, stats);
+}
+
+static inline void drv_get_tkip_seq(struct ieee80211_local *local,
+ u8 hw_key_idx, u32 *iv32, u16 *iv16)
+{
+ if (local->ops->get_tkip_seq)
+ local->ops->get_tkip_seq(&local->hw, hw_key_idx, iv32, iv16);
+}
+
+static inline int drv_set_rts_threshold(struct ieee80211_local *local,
+ u32 value)
+{
+ if (local->ops->set_rts_threshold)
+ return local->ops->set_rts_threshold(&local->hw, value);
+ return 0;
+}
+
+static inline void drv_sta_notify(struct ieee80211_local *local,
+ struct ieee80211_vif *vif,
+ enum sta_notify_cmd cmd,
+ struct ieee80211_sta *sta)
+{
+ if (local->ops->sta_notify)
+ local->ops->sta_notify(&local->hw, vif, cmd, sta);
+}
+
+static inline int drv_conf_tx(struct ieee80211_local *local, u16 queue,
+ const struct ieee80211_tx_queue_params *params)
+{
+ if (local->ops->conf_tx)
+ return local->ops->conf_tx(&local->hw, queue, params);
+ return -EOPNOTSUPP;
+}
+
+static inline int drv_get_tx_stats(struct ieee80211_local *local,
+ struct ieee80211_tx_queue_stats *stats)
+{
+ return local->ops->get_tx_stats(&local->hw, stats);
+}
+
+static inline u64 drv_get_tsf(struct ieee80211_local *local)
+{
+ if (local->ops->get_tsf)
+ return local->ops->get_tsf(&local->hw);
+ return -1ULL;
+}
+
+static inline void drv_set_tsf(struct ieee80211_local *local, u64 tsf)
+{
+ if (local->ops->set_tsf)
+ local->ops->set_tsf(&local->hw, tsf);
+}
+
+static inline void drv_reset_tsf(struct ieee80211_local *local)
+{
+ if (local->ops->reset_tsf)
+ local->ops->reset_tsf(&local->hw);
+}
+
+static inline int drv_tx_last_beacon(struct ieee80211_local *local)
+{
+ if (local->ops->tx_last_beacon)
+ return local->ops->tx_last_beacon(&local->hw);
+ return 1;
+}
+
+static inline int drv_ampdu_action(struct ieee80211_local *local,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta, u16 tid,
+ u16 *ssn)
+{
+ if (local->ops->ampdu_action)
+ return local->ops->ampdu_action(&local->hw, action,
+ sta, tid, ssn);
+ return -EOPNOTSUPP;
+}
+#endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 6030e003180..aa537681f87 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -22,6 +22,7 @@
#include <asm/unaligned.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "rate.h"
#define IEEE80211_SCAN_INTERVAL (2 * HZ)
@@ -73,11 +74,11 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt;
u8 *pos;
struct ieee80211_supported_band *sband;
+ u32 bss_change;
- if (local->ops->reset_tsf) {
- /* Reset own TSF to allow time synchronization work. */
- local->ops->reset_tsf(local_to_hw(local));
- }
+
+ /* Reset own TSF to allow time synchronization work. */
+ drv_reset_tsf(local);
skb = ifibss->skb;
rcu_assign_pointer(ifibss->presp, NULL);
@@ -92,15 +93,12 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
memcpy(ifibss->bssid, bssid, ETH_ALEN);
- local->hw.conf.beacon_int = beacon_int >= 10 ? beacon_int : 10;
-
sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0;
- ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID);
-
local->oper_channel = chan;
local->oper_channel_type = NL80211_CHAN_NO_HT;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+
sband = local->hw.wiphy->bands[chan->band];
/* Build IBSS probe response */
@@ -111,7 +109,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
memset(mgmt->da, 0xff, ETH_ALEN);
memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
memcpy(mgmt->bssid, ifibss->bssid, ETH_ALEN);
- mgmt->u.beacon.beacon_int = cpu_to_le16(local->hw.conf.beacon_int);
+ mgmt->u.beacon.beacon_int = cpu_to_le16(beacon_int);
mgmt->u.beacon.timestamp = cpu_to_le64(tsf);
mgmt->u.beacon.capab_info = cpu_to_le16(capability);
@@ -156,8 +154,13 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
rcu_assign_pointer(ifibss->presp, skb);
- ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON |
- IEEE80211_IFCC_BEACON_ENABLED);
+ sdata->vif.bss_conf.beacon_int = beacon_int;
+ bss_change = BSS_CHANGED_BEACON_INT;
+ bss_change |= ieee80211_reset_erp_info(sdata);
+ bss_change |= BSS_CHANGED_BSSID;
+ bss_change |= BSS_CHANGED_BEACON;
+ bss_change |= BSS_CHANGED_BEACON_ENABLED;
+ ieee80211_bss_info_change_notify(sdata, bss_change);
rates = 0;
for (i = 0; i < supp_rates_len; i++) {
@@ -181,8 +184,13 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_bss *bss)
{
+ u16 beacon_int = bss->cbss.beacon_interval;
+
+ if (beacon_int < 10)
+ beacon_int = 10;
+
__ieee80211_sta_join_ibss(sdata, bss->cbss.bssid,
- bss->cbss.beacon_interval,
+ beacon_int,
bss->cbss.channel,
bss->supp_rates_len, bss->supp_rates,
bss->cbss.capability,
@@ -307,12 +315,13 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
bitrates[rx_status->rate_idx].bitrate;
rx_timestamp = rx_status->mactime + (24 * 8 * 10 / rate);
- } else if (local && local->ops && local->ops->get_tsf)
- /* second best option: get current TSF */
- rx_timestamp = local->ops->get_tsf(local_to_hw(local));
- else
- /* can't merge without knowing the TSF */
- rx_timestamp = -1LLU;
+ } else {
+ /*
+ * second best option: get current TSF
+ * (will return -1 if not supported)
+ */
+ rx_timestamp = drv_get_tsf(local);
+ }
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "RX beacon SA=%pM BSSID="
@@ -432,14 +441,7 @@ static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata)
printk(KERN_DEBUG "%s: No active IBSS STAs - trying to scan for other "
"IBSS networks with same SSID (merge)\n", sdata->dev->name);
- /* XXX maybe racy? */
- if (sdata->local->scan_req)
- return;
-
- memcpy(sdata->local->int_scan_req.ssids[0].ssid,
- ifibss->ssid, IEEE80211_MAX_SSID_LEN);
- sdata->local->int_scan_req.ssids[0].ssid_len = ifibss->ssid_len;
- ieee80211_request_scan(sdata, &sdata->local->int_scan_req);
+ ieee80211_request_internal_scan(sdata, ifibss->ssid, ifibss->ssid_len);
}
static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
@@ -471,9 +473,6 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
sband = local->hw.wiphy->bands[ifibss->channel->band];
- if (local->hw.conf.beacon_int == 0)
- local->hw.conf.beacon_int = 100;
-
capability = WLAN_CAPABILITY_IBSS;
if (sdata->default_key)
@@ -487,7 +486,7 @@ static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata)
*pos++ = (u8) (rate / 5);
}
- __ieee80211_sta_join_ibss(sdata, bssid, local->hw.conf.beacon_int,
+ __ieee80211_sta_join_ibss(sdata, bssid, sdata->vif.bss_conf.beacon_int,
ifibss->channel, sband->n_bitrates,
supp_rates, capability, 0);
}
@@ -552,15 +551,8 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata)
printk(KERN_DEBUG "%s: Trigger new scan to find an IBSS to "
"join\n", sdata->dev->name);
- /* XXX maybe racy? */
- if (local->scan_req)
- return;
-
- memcpy(local->int_scan_req.ssids[0].ssid,
- ifibss->ssid, IEEE80211_MAX_SSID_LEN);
- local->int_scan_req.ssids[0].ssid_len =
- ifibss->ssid_len;
- ieee80211_request_scan(sdata, &local->int_scan_req);
+ ieee80211_request_internal_scan(sdata, ifibss->ssid,
+ ifibss->ssid_len);
} else if (ifibss->state != IEEE80211_IBSS_MLME_JOINED) {
int interval = IEEE80211_SCAN_INTERVAL;
@@ -600,10 +592,7 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
len < 24 + 2 || !ifibss->presp)
return;
- if (local->ops->tx_last_beacon)
- tx_last_beacon = local->ops->tx_last_beacon(local_to_hw(local));
- else
- tx_last_beacon = 1;
+ tx_last_beacon = drv_tx_last_beacon(local);
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: RX ProbeReq SA=%pM DA=%pM BSSID=%pM"
@@ -786,8 +775,12 @@ void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local)
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!netif_running(sdata->dev))
+ continue;
if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
continue;
+ if (!sdata->u.ibss.ssid_len)
+ continue;
sdata->u.ibss.last_scan_completed = jiffies;
ieee80211_sta_find_ibss(sdata);
}
@@ -827,15 +820,14 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
{
struct sk_buff *skb;
- memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN);
- sdata->u.ibss.ssid_len = params->ssid_len;
-
if (params->bssid) {
memcpy(sdata->u.ibss.bssid, params->bssid, ETH_ALEN);
sdata->u.ibss.fixed_bssid = true;
} else
sdata->u.ibss.fixed_bssid = false;
+ sdata->vif.bss_conf.beacon_int = params->beacon_interval;
+
sdata->u.ibss.channel = params->channel;
sdata->u.ibss.fixed_channel = params->channel_fixed;
@@ -859,6 +851,19 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
sdata->u.ibss.ibss_join_req = jiffies;
+ memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN);
+
+ /*
+ * The ssid_len setting below is used to see whether
+ * we are active, and we need all other settings
+ * before that may get visible.
+ */
+ mb();
+
+ sdata->u.ibss.ssid_len = params->ssid_len;
+
+ ieee80211_recalc_idle(sdata->local);
+
set_bit(IEEE80211_IBSS_REQ_RUN, &sdata->u.ibss.request);
queue_work(sdata->local->hw.workqueue, &sdata->u.ibss.work);
@@ -880,12 +885,15 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata)
kfree(sdata->u.ibss.ie);
skb = sdata->u.ibss.presp;
rcu_assign_pointer(sdata->u.ibss.presp, NULL);
- ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON_ENABLED);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
synchronize_rcu();
kfree_skb(skb);
skb_queue_purge(&sdata->u.ibss.skb_queue);
memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
+ sdata->u.ibss.ssid_len = 0;
+
+ ieee80211_recalc_idle(sdata->local);
return 0;
}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 1579bc92c88..03e0d22603c 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -248,9 +248,8 @@ struct mesh_preq_queue {
#define IEEE80211_STA_EXT_SME BIT(17)
/* flags for MLME request */
#define IEEE80211_STA_REQ_SCAN 0
-#define IEEE80211_STA_REQ_DIRECT_PROBE 1
-#define IEEE80211_STA_REQ_AUTH 2
-#define IEEE80211_STA_REQ_RUN 3
+#define IEEE80211_STA_REQ_AUTH 1
+#define IEEE80211_STA_REQ_RUN 2
/* bitfield of allowed auth algs */
#define IEEE80211_AUTH_ALG_OPEN BIT(0)
@@ -659,6 +658,7 @@ struct ieee80211_local {
/* Scanning and BSS list */
+ struct mutex scan_mtx;
bool sw_scanning, hw_scanning;
struct cfg80211_ssid scan_ssid;
struct cfg80211_scan_request int_scan_req;
@@ -905,7 +905,6 @@ static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr)
int ieee80211_hw_config(struct ieee80211_local *local, u32 changed);
-int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed);
void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx);
void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
u32 changed);
@@ -947,6 +946,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata);
/* scan/BSS handling */
void ieee80211_scan_work(struct work_struct *work);
+int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
+ const u8 *ssid, u8 ssid_len);
int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
struct cfg80211_scan_request *req);
int ieee80211_scan_results(struct ieee80211_local *local,
@@ -960,9 +961,6 @@ int ieee80211_sta_set_extra_ie(struct ieee80211_sub_if_data *sdata,
const char *ie, size_t len);
void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local);
-void ieee80211_scan_failed(struct ieee80211_local *local);
-int ieee80211_start_scan(struct ieee80211_sub_if_data *scan_sdata,
- struct cfg80211_scan_request *req);
struct ieee80211_bss *
ieee80211_bss_info_update(struct ieee80211_local *local,
struct ieee80211_rx_status *rx_status,
@@ -987,6 +985,8 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type);
void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata);
void ieee80211_remove_interfaces(struct ieee80211_local *local);
+u32 __ieee80211_recalc_idle(struct ieee80211_local *local);
+void ieee80211_recalc_idle(struct ieee80211_local *local);
/* tx handling */
void ieee80211_clear_tx_pending(struct ieee80211_local *local);
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 52425975bbb..8b6daf0219f 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -20,6 +20,7 @@
#include "debugfs_netdev.h"
#include "mesh.h"
#include "led.h"
+#include "driver-ops.h"
/**
* DOC: Interface list locking
@@ -164,9 +165,7 @@ static int ieee80211_open(struct net_device *dev)
}
if (local->open_count == 0) {
- res = 0;
- if (local->ops->start)
- res = local->ops->start(local_to_hw(local));
+ res = drv_start(local);
if (res)
goto err_del_bss;
/* we're brought up, everything changes */
@@ -199,8 +198,8 @@ static int ieee80211_open(struct net_device *dev)
* Validate the MAC address for this device.
*/
if (!is_valid_ether_addr(dev->dev_addr)) {
- if (!local->open_count && local->ops->stop)
- local->ops->stop(local_to_hw(local));
+ if (!local->open_count)
+ drv_stop(local);
return -EADDRNOTAVAIL;
}
@@ -241,7 +240,7 @@ static int ieee80211_open(struct net_device *dev)
conf.vif = &sdata->vif;
conf.type = sdata->vif.type;
conf.mac_addr = dev->dev_addr;
- res = local->ops->add_interface(local_to_hw(local), &conf);
+ res = drv_add_interface(local, &conf);
if (res)
goto err_stop;
@@ -302,6 +301,8 @@ static int ieee80211_open(struct net_device *dev)
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_inc(&local->iff_promiscs);
+ hw_reconf_flags |= __ieee80211_recalc_idle(local);
+
local->open_count++;
if (hw_reconf_flags) {
ieee80211_hw_config(local, hw_reconf_flags);
@@ -328,10 +329,10 @@ static int ieee80211_open(struct net_device *dev)
return 0;
err_del_interface:
- local->ops->remove_interface(local_to_hw(local), &conf);
+ drv_remove_interface(local, &conf);
err_stop:
- if (!local->open_count && local->ops->stop)
- local->ops->stop(local_to_hw(local));
+ if (!local->open_count)
+ drv_stop(local);
err_del_bss:
sdata->bss = NULL;
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
@@ -544,17 +545,20 @@ static int ieee80211_stop(struct net_device *dev)
conf.mac_addr = dev->dev_addr;
/* disable all keys for as long as this netdev is down */
ieee80211_disable_keys(sdata);
- local->ops->remove_interface(local_to_hw(local), &conf);
+ drv_remove_interface(local, &conf);
}
sdata->bss = NULL;
+ hw_reconf_flags |= __ieee80211_recalc_idle(local);
+
+ ieee80211_recalc_ps(local, -1);
+
if (local->open_count == 0) {
if (netif_running(local->mdev))
dev_close(local->mdev);
- if (local->ops->stop)
- local->ops->stop(local_to_hw(local));
+ drv_stop(local);
ieee80211_led_radio(local, 0);
@@ -567,8 +571,6 @@ static int ieee80211_stop(struct net_device *dev)
hw_reconf_flags = 0;
}
- ieee80211_recalc_ps(local, -1);
-
/* do after stop to avoid reconfiguring when we stop anyway */
if (hw_reconf_flags)
ieee80211_hw_config(local, hw_reconf_flags);
@@ -894,3 +896,73 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local)
unregister_netdevice(sdata->dev);
}
}
+
+static u32 ieee80211_idle_off(struct ieee80211_local *local,
+ const char *reason)
+{
+ if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
+ return 0;
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ printk(KERN_DEBUG "%s: device no longer idle - %s\n",
+ wiphy_name(local->hw.wiphy), reason);
+#endif
+
+ local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
+ return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+static u32 ieee80211_idle_on(struct ieee80211_local *local)
+{
+ if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
+ return 0;
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ printk(KERN_DEBUG "%s: device now idle\n",
+ wiphy_name(local->hw.wiphy));
+#endif
+
+ local->hw.conf.flags |= IEEE80211_CONF_IDLE;
+ return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+ struct ieee80211_sub_if_data *sdata;
+ int count = 0;
+
+ if (local->hw_scanning || local->sw_scanning)
+ return ieee80211_idle_off(local, "scanning");
+
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!netif_running(sdata->dev))
+ continue;
+ /* do not count disabled managed interfaces */
+ if (sdata->vif.type == NL80211_IFTYPE_STATION &&
+ sdata->u.mgd.state == IEEE80211_STA_MLME_DISABLED)
+ continue;
+ /* do not count unused IBSS interfaces */
+ if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+ !sdata->u.ibss.ssid_len)
+ continue;
+ /* count everything else */
+ count++;
+ }
+
+ if (!count)
+ return ieee80211_idle_on(local);
+ else
+ return ieee80211_idle_off(local, "in use");
+
+ return 0;
+}
+
+void ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+ u32 chg;
+
+ mutex_lock(&local->iflist_mtx);
+ chg = __ieee80211_recalc_idle(local);
+ mutex_unlock(&local->iflist_mtx);
+ ieee80211_hw_config(local, chg);
+}
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 687acf23054..b7e1350273b 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -16,6 +16,7 @@
#include <linux/rtnetlink.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "debugfs_key.h"
#include "aes_ccm.h"
#include "aes_cmac.h"
@@ -136,8 +137,7 @@ static void ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
struct ieee80211_sub_if_data,
u.ap);
- ret = key->local->ops->set_key(local_to_hw(key->local), SET_KEY,
- &sdata->vif, sta, &key->conf);
+ ret = drv_set_key(key->local, SET_KEY, &sdata->vif, sta, &key->conf);
if (!ret) {
spin_lock(&todo_lock);
@@ -179,8 +179,8 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key)
struct ieee80211_sub_if_data,
u.ap);
- ret = key->local->ops->set_key(local_to_hw(key->local), DISABLE_KEY,
- &sdata->vif, sta, &key->conf);
+ ret = drv_set_key(key->local, DISABLE_KEY, &sdata->vif,
+ sta, &key->conf);
if (ret)
printk(KERN_ERR "mac80211-%s: failed to remove key "
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 5ca62ea1507..b80bc80e46c 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -26,6 +26,7 @@
#include <net/cfg80211.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "rate.h"
#include "mesh.h"
#include "wep.h"
@@ -81,10 +82,9 @@ void ieee80211_configure_filter(struct ieee80211_local *local)
/* be a bit nasty */
new_flags |= (1<<31);
- local->ops->configure_filter(local_to_hw(local),
- changed_flags, &new_flags,
- local->mdev->mc_count,
- local->mdev->mc_list);
+ drv_configure_filter(local, changed_flags, &new_flags,
+ local->mdev->mc_count,
+ local->mdev->mc_list);
WARN_ON(new_flags & (1<<31));
@@ -152,82 +152,6 @@ static void ieee80211_master_set_multicast_list(struct net_device *dev)
ieee80211_configure_filter(local);
}
-/* everything else */
-
-int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed)
-{
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_if_conf conf;
-
- if (WARN_ON(!netif_running(sdata->dev)))
- return 0;
-
- memset(&conf, 0, sizeof(conf));
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
- conf.bssid = sdata->u.mgd.bssid;
- else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
- conf.bssid = sdata->u.ibss.bssid;
- else if (sdata->vif.type == NL80211_IFTYPE_AP)
- conf.bssid = sdata->dev->dev_addr;
- else if (ieee80211_vif_is_mesh(&sdata->vif)) {
- static const u8 zero[ETH_ALEN] = { 0 };
- conf.bssid = zero;
- } else {
- WARN_ON(1);
- return -EINVAL;
- }
-
- if (!local->ops->config_interface)
- return 0;
-
- switch (sdata->vif.type) {
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_MESH_POINT:
- break;
- default:
- /* do not warn to simplify caller in scan.c */
- changed &= ~IEEE80211_IFCC_BEACON_ENABLED;
- if (WARN_ON(changed & IEEE80211_IFCC_BEACON))
- return -EINVAL;
- changed &= ~IEEE80211_IFCC_BEACON;
- break;
- }
-
- if (changed & IEEE80211_IFCC_BEACON_ENABLED) {
- if (local->sw_scanning) {
- conf.enable_beacon = false;
- } else {
- /*
- * Beacon should be enabled, but AP mode must
- * check whether there is a beacon configured.
- */
- switch (sdata->vif.type) {
- case NL80211_IFTYPE_AP:
- conf.enable_beacon =
- !!rcu_dereference(sdata->u.ap.beacon);
- break;
- case NL80211_IFTYPE_ADHOC:
- conf.enable_beacon = !!sdata->u.ibss.presp;
- break;
- case NL80211_IFTYPE_MESH_POINT:
- conf.enable_beacon = true;
- break;
- default:
- /* not reached */
- WARN_ON(1);
- break;
- }
- }
- }
-
- conf.changed = changed;
-
- return local->ops->config_interface(local_to_hw(local),
- &sdata->vif, &conf);
-}
-
int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
{
struct ieee80211_channel *chan;
@@ -268,7 +192,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
}
if (changed && local->open_count) {
- ret = local->ops->config(local_to_hw(local), changed);
+ ret = drv_config(local, changed);
/*
* Goal:
* HW reconfiguration should never fail, the driver has told
@@ -294,17 +218,77 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
{
struct ieee80211_local *local = sdata->local;
- if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
+ if (!changed)
return;
- if (!changed)
+ if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
+ else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
+ else if (sdata->vif.type == NL80211_IFTYPE_AP)
+ sdata->vif.bss_conf.bssid = sdata->dev->dev_addr;
+ else if (ieee80211_vif_is_mesh(&sdata->vif)) {
+ static const u8 zero[ETH_ALEN] = { 0 };
+ sdata->vif.bss_conf.bssid = zero;
+ } else {
+ WARN_ON(1);
return;
+ }
+
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ break;
+ default:
+ /* do not warn to simplify caller in scan.c */
+ changed &= ~BSS_CHANGED_BEACON_ENABLED;
+ if (WARN_ON(changed & BSS_CHANGED_BEACON))
+ return;
+ break;
+ }
+
+ if (changed & BSS_CHANGED_BEACON_ENABLED) {
+ if (local->sw_scanning) {
+ sdata->vif.bss_conf.enable_beacon = false;
+ } else {
+ /*
+ * Beacon should be enabled, but AP mode must
+ * check whether there is a beacon configured.
+ */
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP:
+ sdata->vif.bss_conf.enable_beacon =
+ !!rcu_dereference(sdata->u.ap.beacon);
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ sdata->vif.bss_conf.enable_beacon =
+ !!rcu_dereference(sdata->u.ibss.presp);
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ sdata->vif.bss_conf.enable_beacon = true;
+ break;
+ default:
+ /* not reached */
+ WARN_ON(1);
+ break;
+ }
+ }
+ }
- if (local->ops->bss_info_changed)
- local->ops->bss_info_changed(local_to_hw(local),
- &sdata->vif,
- &sdata->vif.bss_conf,
- changed);
+ drv_bss_info_changed(local, &sdata->vif,
+ &sdata->vif.bss_conf, changed);
+
+ /*
+ * DEPRECATED
+ *
+ * ~changed is just there to not do this at resume time
+ */
+ if (changed & BSS_CHANGED_BEACON_INT && ~changed) {
+ local->hw.conf.beacon_int = sdata->vif.bss_conf.beacon_int;
+ ieee80211_hw_config(local,
+ _IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
+ }
}
u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
@@ -783,6 +767,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
INIT_LIST_HEAD(&local->interfaces);
mutex_init(&local->iflist_mtx);
+ mutex_init(&local->scan_mtx);
spin_lock_init(&local->key_lock);
@@ -970,9 +955,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
debugfs_hw_add(local);
- if (local->hw.conf.beacon_int < 10)
- local->hw.conf.beacon_int = 100;
-
if (local->hw.max_listen_interval == 0)
local->hw.max_listen_interval = 1;
@@ -1126,6 +1108,7 @@ void ieee80211_free_hw(struct ieee80211_hw *hw)
struct ieee80211_local *local = hw_to_local(hw);
mutex_destroy(&local->iflist_mtx);
+ mutex_destroy(&local->scan_mtx);
wiphy_free(local->hw.wiphy);
}
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 9a3e5de0410..9000b01a167 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -417,7 +417,7 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata,
free_plinks = mesh_plink_availables(sdata);
if (free_plinks != sdata->u.mesh.accepting_plinks)
- ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
ifmsh->housekeeping = false;
mod_timer(&ifmsh->housekeeping_timer,
@@ -432,8 +432,8 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
ifmsh->housekeeping = true;
queue_work(local->hw.workqueue, &ifmsh->work);
- ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON |
- IEEE80211_IFCC_BEACON_ENABLED);
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
+ BSS_CHANGED_BEACON_ENABLED);
}
void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 3610c11286b..75c487229f2 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -23,6 +23,7 @@
#include <asm/unaligned.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "rate.h"
#include "led.h"
@@ -487,6 +488,13 @@ static void ieee80211_enable_ps(struct ieee80211_local *local,
{
struct ieee80211_conf *conf = &local->hw.conf;
+ /*
+ * If we are scanning right now then the parameters will
+ * take effect when scan finishes.
+ */
+ if (local->hw_scanning || local->sw_scanning)
+ return;
+
if (conf->dynamic_ps_timeout > 0 &&
!(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) {
mod_timer(&local->dynamic_ps_timer, jiffies +
@@ -555,7 +563,7 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
maxslp = min_t(int, dtimper,
latency / beaconint_us);
- local->hw.conf.max_sleep_interval = maxslp;
+ local->hw.conf.max_sleep_period = maxslp;
local->ps_sdata = found;
}
} else {
@@ -676,11 +684,10 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
local->mdev->name, queue, aci, acm, params.aifs, params.cw_min,
params.cw_max, params.txop);
#endif
- if (local->ops->conf_tx &&
- local->ops->conf_tx(local_to_hw(local), queue, &params)) {
+ if (drv_conf_tx(local, queue, &params) && local->ops->conf_tx)
printk(KERN_DEBUG "%s: failed to set TX queue "
- "parameters for queue %d\n", local->mdev->name, queue);
- }
+ "parameters for queue %d\n", local->mdev->name,
+ queue);
}
}
@@ -835,6 +842,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
sdata->vif.bss_conf.timestamp = bss->cbss.tsf;
sdata->vif.bss_conf.dtim_period = bss->dtim_period;
+ bss_info_changed |= BSS_CHANGED_BEACON_INT;
bss_info_changed |= ieee80211_handle_bss_capability(sdata,
bss->cbss.capability, bss->has_erp_value, bss->erp_value);
@@ -882,7 +890,8 @@ static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata)
printk(KERN_DEBUG "%s: direct probe to AP %pM timed out\n",
sdata->dev->name, ifmgd->bssid);
ifmgd->state = IEEE80211_STA_MLME_DISABLED;
- ieee80211_sta_send_apinfo(sdata);
+ ieee80211_recalc_idle(local);
+ cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid);
/*
* Most likely AP is not in the range so remove the
@@ -907,8 +916,6 @@ static void ieee80211_direct_probe(struct ieee80211_sub_if_data *sdata)
ifmgd->state = IEEE80211_STA_MLME_DIRECT_PROBE;
- set_bit(IEEE80211_STA_REQ_DIRECT_PROBE, &ifmgd->request);
-
/* Direct probe is sent to broadcast address as some APs
* will not answer to direct packet in unassociated state.
*/
@@ -932,6 +939,7 @@ static void ieee80211_authenticate(struct ieee80211_sub_if_data *sdata)
" timed out\n",
sdata->dev->name, ifmgd->bssid);
ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+ ieee80211_recalc_idle(local);
cfg80211_send_auth_timeout(sdata->dev, ifmgd->bssid);
ieee80211_rx_bss_remove(sdata, ifmgd->bssid,
sdata->local->hw.conf.channel->center_freq,
@@ -1035,6 +1043,8 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
rcu_read_unlock();
+ ieee80211_recalc_idle(local);
+
/* channel(_type) changes are handled by ieee80211_hw_config */
local->oper_channel_type = NL80211_CHAN_NO_HT;
@@ -1115,6 +1125,7 @@ static void ieee80211_associate(struct ieee80211_sub_if_data *sdata)
" timed out\n",
sdata->dev->name, ifmgd->bssid);
ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+ ieee80211_recalc_idle(local);
cfg80211_send_assoc_timeout(sdata->dev, ifmgd->bssid);
ieee80211_rx_bss_remove(sdata, ifmgd->bssid,
sdata->local->hw.conf.channel->center_freq,
@@ -1135,6 +1146,7 @@ static void ieee80211_associate(struct ieee80211_sub_if_data *sdata)
printk(KERN_DEBUG "%s: mismatch in privacy configuration and "
"mixed-cell disabled - abort association\n", sdata->dev->name);
ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+ ieee80211_recalc_idle(local);
return;
}
@@ -1273,6 +1285,7 @@ static void ieee80211_auth_completed(struct ieee80211_sub_if_data *sdata)
if (ifmgd->flags & IEEE80211_STA_EXT_SME) {
/* Wait for SME to request association */
ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+ ieee80211_recalc_idle(sdata->local);
} else
ieee80211_associate(sdata);
}
@@ -1509,6 +1522,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
if (ifmgd->flags & IEEE80211_STA_EXT_SME) {
/* Wait for SME to decide what to do next */
ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+ ieee80211_recalc_idle(local);
}
return;
}
@@ -1730,8 +1744,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false);
/* direct probe may be part of the association flow */
- if (test_and_clear_bit(IEEE80211_STA_REQ_DIRECT_PROBE,
- &ifmgd->request)) {
+ if (ifmgd->state == IEEE80211_STA_MLME_DIRECT_PROBE) {
printk(KERN_DEBUG "%s direct probe responded\n",
sdata->dev->name);
ieee80211_authenticate(sdata);
@@ -1974,10 +1987,8 @@ static void ieee80211_sta_reset_auth(struct ieee80211_sub_if_data *sdata)
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_local *local = sdata->local;
- if (local->ops->reset_tsf) {
- /* Reset own TSF to allow time synchronization work. */
- local->ops->reset_tsf(local_to_hw(local));
- }
+ /* Reset own TSF to allow time synchronization work. */
+ drv_reset_tsf(local);
ifmgd->wmm_last_param_set = -1; /* allow any WMM update */
@@ -2065,25 +2076,18 @@ static int ieee80211_sta_config_auth(struct ieee80211_sub_if_data *sdata)
return 0;
} else {
if (ifmgd->assoc_scan_tries < IEEE80211_ASSOC_SCANS_MAX_TRIES) {
+
ifmgd->assoc_scan_tries++;
- /* XXX maybe racy? */
- if (local->scan_req)
- return -1;
- memcpy(local->int_scan_req.ssids[0].ssid,
- ifmgd->ssid, IEEE80211_MAX_SSID_LEN);
- if (ifmgd->flags & IEEE80211_STA_AUTO_SSID_SEL)
- local->int_scan_req.ssids[0].ssid_len = 0;
- else
- local->int_scan_req.ssids[0].ssid_len = ifmgd->ssid_len;
- if (ieee80211_start_scan(sdata, &local->int_scan_req))
- ieee80211_scan_failed(local);
+ ieee80211_request_internal_scan(sdata, ifmgd->ssid,
+ ssid_len);
ifmgd->state = IEEE80211_STA_MLME_AUTHENTICATE;
set_bit(IEEE80211_STA_REQ_AUTH, &ifmgd->request);
} else {
ifmgd->assoc_scan_tries = 0;
ifmgd->state = IEEE80211_STA_MLME_DISABLED;
+ ieee80211_recalc_idle(local);
}
}
return -1;
@@ -2115,14 +2119,8 @@ static void ieee80211_sta_work(struct work_struct *work)
ifmgd->state != IEEE80211_STA_MLME_AUTHENTICATE &&
ifmgd->state != IEEE80211_STA_MLME_ASSOCIATE &&
test_and_clear_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request)) {
- /*
- * The call to ieee80211_start_scan can fail but ieee80211_request_scan
- * (which queued ieee80211_sta_work) did not return an error. Thus, call
- * ieee80211_scan_failed here if ieee80211_start_scan fails in order to
- * notify the scan requester.
- */
- if (ieee80211_start_scan(sdata, local->scan_req))
- ieee80211_scan_failed(local);
+ queue_delayed_work(local->hw.workqueue, &local->scan_work,
+ round_jiffies_relative(0));
return;
}
@@ -2133,6 +2131,8 @@ static void ieee80211_sta_work(struct work_struct *work)
} else if (!test_and_clear_bit(IEEE80211_STA_REQ_RUN, &ifmgd->request))
return;
+ ieee80211_recalc_idle(local);
+
switch (ifmgd->state) {
case IEEE80211_STA_MLME_DISABLED:
break;
@@ -2291,12 +2291,8 @@ int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid)
ifmgd->flags &= ~IEEE80211_STA_BSSID_SET;
}
- if (netif_running(sdata->dev)) {
- if (ieee80211_if_config(sdata, IEEE80211_IFCC_BSSID)) {
- printk(KERN_DEBUG "%s: Failed to config new BSSID to "
- "the low-level driver\n", sdata->dev->name);
- }
- }
+ if (netif_running(sdata->dev))
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
return ieee80211_sta_commit(sdata);
}
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index b38986c9dee..9d3d89abbb5 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -2,6 +2,7 @@
#include <net/rtnetlink.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "led.h"
int __ieee80211_suspend(struct ieee80211_hw *hw)
@@ -43,8 +44,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
struct ieee80211_sub_if_data,
u.ap);
- local->ops->sta_notify(hw, &sdata->vif,
- STA_NOTIFY_REMOVE, &sta->sta);
+ drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE,
+ &sta->sta);
}
spin_unlock_irqrestore(&local->sta_lock, flags);
}
@@ -57,7 +58,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
conf.vif = &sdata->vif;
conf.type = sdata->vif.type;
conf.mac_addr = sdata->dev->dev_addr;
- local->ops->remove_interface(hw, &conf);
+ drv_remove_interface(local, &conf);
}
}
@@ -67,7 +68,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
/* stop hardware */
if (local->open_count) {
ieee80211_led_radio(local, false);
- local->ops->stop(hw);
+ drv_stop(local);
}
return 0;
}
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 70df3dcc3cf..efaf3834973 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -80,8 +80,7 @@ use_low_rate(struct sk_buff *skb)
fc = le16_to_cpu(hdr->frame_control);
return ((info->flags & IEEE80211_TX_CTL_NO_ACK) ||
- (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
- is_multicast_ether_addr(hdr->addr1));
+ (fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA);
}
@@ -245,7 +244,10 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta,
if (!sta || !mi || use_low_rate(skb)) {
ar[0].idx = rate_lowest_index(sband, sta);
- ar[0].count = mp->max_retry;
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ ar[0].count = 1;
+ else
+ ar[0].count = mp->max_retry;
return;
}
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index 01d59a8e334..6704fb55c6b 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -289,13 +289,15 @@ rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta,
info->control.rates[0].count =
txrc->hw->conf.short_frame_max_tx_count;
- /* Send management frames and broadcast/multicast data using lowest
- * rate. */
+ /* Send management frames and NO_ACK data using lowest rate. */
fc = le16_to_cpu(hdr->frame_control);
if (!sta || !spinfo ||
(fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
- is_multicast_ether_addr(hdr->addr1)) {
+ info->flags & IEEE80211_TX_CTL_NO_ACK) {
info->control.rates[0].idx = rate_lowest_index(sband, sta);
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ info->control.rates[0].count = 1;
+
return;
}
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index a5afb79dab6..d052f400482 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -19,6 +19,7 @@
#include <net/ieee80211_radiotap.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "led.h"
#include "mesh.h"
#include "wep.h"
@@ -773,9 +774,7 @@ static void ap_sta_ps_start(struct sta_info *sta)
atomic_inc(&sdata->bss->num_sta_ps);
set_and_clear_sta_flags(sta, WLAN_STA_PS, WLAN_STA_PSPOLL);
- if (local->ops->sta_notify)
- local->ops->sta_notify(local_to_hw(local), &sdata->vif,
- STA_NOTIFY_SLEEP, &sta->sta);
+ drv_sta_notify(local, &sdata->vif, STA_NOTIFY_SLEEP, &sta->sta);
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n",
sdata->dev->name, sta->sta.addr, sta->sta.aid);
@@ -792,9 +791,7 @@ static int ap_sta_ps_end(struct sta_info *sta)
atomic_dec(&sdata->bss->num_sta_ps);
clear_sta_flags(sta, WLAN_STA_PS | WLAN_STA_PSPOLL);
- if (local->ops->sta_notify)
- local->ops->sta_notify(local_to_hw(local), &sdata->vif,
- STA_NOTIFY_AWAKE, &sta->sta);
+ drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta);
if (!skb_queue_empty(&sta->ps_tx_buf))
sta_info_clear_tim_bit(sta);
@@ -2287,6 +2284,43 @@ static inline u16 seq_sub(u16 sq1, u16 sq2)
}
+static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
+ struct tid_ampdu_rx *tid_agg_rx,
+ int index)
+{
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_rate *rate;
+ struct ieee80211_rx_status status;
+
+ if (!tid_agg_rx->reorder_buf[index])
+ goto no_frame;
+
+ /* release the reordered frames to stack */
+ memcpy(&status, tid_agg_rx->reorder_buf[index]->cb, sizeof(status));
+ sband = hw->wiphy->bands[status.band];
+ if (status.flag & RX_FLAG_HT)
+ rate = sband->bitrates; /* TODO: HT rates */
+ else
+ rate = &sband->bitrates[status.rate_idx];
+ __ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index],
+ &status, rate);
+ tid_agg_rx->stored_mpdu_num--;
+ tid_agg_rx->reorder_buf[index] = NULL;
+
+no_frame:
+ tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
+}
+
+
+/*
+ * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If
+ * the skb was added to the buffer longer than this time ago, the earlier
+ * frames that have not yet been received are assumed to be lost and the skb
+ * can be released for processing. This may also release other skb's from the
+ * reorder buffer if there are no additional gaps between the frames.
+ */
+#define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
+
/*
* As it function blongs to Rx path it must be called with
* the proper rcu_read_lock protection for its flow.
@@ -2298,12 +2332,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
u16 mpdu_seq_num,
int bar_req)
{
- struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_rx_status status;
u16 head_seq_num, buf_size;
int index;
- struct ieee80211_supported_band *sband;
- struct ieee80211_rate *rate;
buf_size = tid_agg_rx->buf_size;
head_seq_num = tid_agg_rx->head_seq_num;
@@ -2328,28 +2358,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
index = seq_sub(tid_agg_rx->head_seq_num,
tid_agg_rx->ssn)
% tid_agg_rx->buf_size;
-
- if (tid_agg_rx->reorder_buf[index]) {
- /* release the reordered frames to stack */
- memcpy(&status,
- tid_agg_rx->reorder_buf[index]->cb,
- sizeof(status));
- sband = local->hw.wiphy->bands[status.band];
- if (status.flag & RX_FLAG_HT) {
- /* TODO: HT rates */
- rate = sband->bitrates;
- } else {
- rate = &sband->bitrates
- [status.rate_idx];
- }
- __ieee80211_rx_handle_packet(hw,
- tid_agg_rx->reorder_buf[index],
- &status, rate);
- tid_agg_rx->stored_mpdu_num--;
- tid_agg_rx->reorder_buf[index] = NULL;
- }
- tid_agg_rx->head_seq_num =
- seq_inc(tid_agg_rx->head_seq_num);
+ ieee80211_release_reorder_frame(hw, tid_agg_rx,
+ index);
}
if (bar_req)
return 1;
@@ -2376,26 +2386,50 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
/* put the frame in the reordering buffer */
tid_agg_rx->reorder_buf[index] = skb;
+ tid_agg_rx->reorder_time[index] = jiffies;
memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus,
sizeof(*rxstatus));
tid_agg_rx->stored_mpdu_num++;
/* release the buffer until next missing frame */
index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn)
% tid_agg_rx->buf_size;
- while (tid_agg_rx->reorder_buf[index]) {
- /* release the reordered frame back to stack */
- memcpy(&status, tid_agg_rx->reorder_buf[index]->cb,
- sizeof(status));
- sband = local->hw.wiphy->bands[status.band];
- if (status.flag & RX_FLAG_HT)
- rate = sband->bitrates; /* TODO: HT rates */
- else
- rate = &sband->bitrates[status.rate_idx];
- __ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index],
- &status, rate);
- tid_agg_rx->stored_mpdu_num--;
- tid_agg_rx->reorder_buf[index] = NULL;
- tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
+ if (!tid_agg_rx->reorder_buf[index] &&
+ tid_agg_rx->stored_mpdu_num > 1) {
+ /*
+ * No buffers ready to be released, but check whether any
+ * frames in the reorder buffer have timed out.
+ */
+ int j;
+ int skipped = 1;
+ for (j = (index + 1) % tid_agg_rx->buf_size; j != index;
+ j = (j + 1) % tid_agg_rx->buf_size) {
+ if (tid_agg_rx->reorder_buf[j] == NULL) {
+ skipped++;
+ continue;
+ }
+ if (!time_after(jiffies, tid_agg_rx->reorder_time[j] +
+ HZ / 10))
+ break;
+
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ if (net_ratelimit())
+ printk(KERN_DEBUG "%s: release an RX reorder "
+ "frame due to timeout on earlier "
+ "frames\n",
+ wiphy_name(hw->wiphy));
+#endif
+ ieee80211_release_reorder_frame(hw, tid_agg_rx, j);
+
+ /*
+ * Increment the head seq# also for the skipped slots.
+ */
+ tid_agg_rx->head_seq_num =
+ (tid_agg_rx->head_seq_num + skipped) &
+ SEQ_MASK;
+ skipped = 0;
+ }
+ } else while (tid_agg_rx->reorder_buf[index]) {
+ ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
index = seq_sub(tid_agg_rx->head_seq_num,
tid_agg_rx->ssn) % tid_agg_rx->buf_size;
}
@@ -2517,6 +2551,18 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
return;
}
+ /*
+ * In theory, the block ack reordering should happen after duplicate
+ * removal (ieee80211_rx_h_check(), which is an RX handler). As such,
+ * the call to ieee80211_rx_reorder_ampdu() should really be moved to
+ * happen as a new RX handler between ieee80211_rx_h_check and
+ * ieee80211_rx_h_decrypt. This cleanup may eventually happen, but for
+ * the time being, the call can be here since RX reorder buf processing
+ * will implicitly skip duplicates. We could, in theory at least,
+ * process frames that ieee80211_rx_h_passive_scan would drop (e.g.,
+ * frames from other than operational channel), but that should not
+ * happen in normal networks.
+ */
if (!ieee80211_rx_reorder_ampdu(local, skb, status))
__ieee80211_rx_handle_packet(hw, skb, status, rate);
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index f25b07feabf..c99ef8d04d3 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -21,6 +21,7 @@
#include <net/iw_handler.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "mesh.h"
#define IEEE80211_PROBE_DELAY (HZ / 33)
@@ -202,18 +203,6 @@ ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
return RX_QUEUED;
}
-void ieee80211_scan_failed(struct ieee80211_local *local)
-{
- if (WARN_ON(!local->scan_req))
- return;
-
- /* notify cfg80211 about the failed scan */
- if (local->scan_req != &local->int_scan_req)
- cfg80211_scan_done(local->scan_req, true);
-
- local->scan_req = NULL;
-}
-
/*
* inform AP that we will go to sleep so that it will buffer the frames
* while we scan
@@ -274,55 +263,61 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata)
}
}
+static void ieee80211_restore_scan_ies(struct ieee80211_local *local)
+{
+ kfree(local->scan_req->ie);
+ local->scan_req->ie = local->orig_ies;
+ local->scan_req->ie_len = local->orig_ies_len;
+}
+
void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
+ bool was_hw_scan;
- if (WARN_ON(!local->hw_scanning && !local->sw_scanning))
- return;
+ mutex_lock(&local->scan_mtx);
- if (WARN_ON(!local->scan_req))
+ if (WARN_ON(!local->hw_scanning && !local->sw_scanning)) {
+ mutex_unlock(&local->scan_mtx);
return;
+ }
- if (local->hw_scanning) {
- kfree(local->scan_req->ie);
- local->scan_req->ie = local->orig_ies;
- local->scan_req->ie_len = local->orig_ies_len;
+ if (WARN_ON(!local->scan_req)) {
+ mutex_unlock(&local->scan_mtx);
+ return;
}
+ if (local->hw_scanning)
+ ieee80211_restore_scan_ies(local);
+
if (local->scan_req != &local->int_scan_req)
cfg80211_scan_done(local->scan_req, aborted);
local->scan_req = NULL;
- if (local->hw_scanning) {
- local->hw_scanning = false;
- /*
- * Somebody might have requested channel change during scan
- * that we won't have acted upon, try now. ieee80211_hw_config
- * will set the flag based on actual changes.
- */
- ieee80211_hw_config(local, 0);
- goto done;
- }
-
+ was_hw_scan = local->hw_scanning;
+ local->hw_scanning = false;
local->sw_scanning = false;
+
+ /* we only have to protect scan_req and hw/sw scan */
+ mutex_unlock(&local->scan_mtx);
+
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+ if (was_hw_scan)
+ goto done;
netif_tx_lock_bh(local->mdev);
netif_addr_lock(local->mdev);
local->filter_flags &= ~FIF_BCN_PRBRESP_PROMISC;
- local->ops->configure_filter(local_to_hw(local),
- FIF_BCN_PRBRESP_PROMISC,
- &local->filter_flags,
- local->mdev->mc_count,
- local->mdev->mc_list);
+ drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
+ &local->filter_flags,
+ local->mdev->mc_count,
+ local->mdev->mc_list);
netif_addr_unlock(local->mdev);
netif_tx_unlock_bh(local->mdev);
- if (local->ops->sw_scan_complete)
- local->ops->sw_scan_complete(local_to_hw(local));
+ drv_sw_scan_complete(local);
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
@@ -342,18 +337,160 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
- ieee80211_if_config(sdata,
- IEEE80211_IFCC_BEACON_ENABLED);
+ ieee80211_bss_info_change_notify(
+ sdata, BSS_CHANGED_BEACON_ENABLED);
}
mutex_unlock(&local->iflist_mtx);
done:
+ ieee80211_recalc_idle(local);
ieee80211_mlme_notify_scan_completed(local);
ieee80211_ibss_notify_scan_completed(local);
ieee80211_mesh_notify_scan_completed(local);
}
EXPORT_SYMBOL(ieee80211_scan_completed);
+static int ieee80211_start_sw_scan(struct ieee80211_local *local)
+{
+ struct ieee80211_sub_if_data *sdata;
+
+ /*
+ * Hardware/driver doesn't support hw_scan, so use software
+ * scanning instead. First send a nullfunc frame with power save
+ * bit on so that AP will buffer the frames for us while we are not
+ * listening, then send probe requests to each channel and wait for
+ * the responses. After all channels are scanned, tune back to the
+ * original channel and send a nullfunc frame with power save bit
+ * off to trigger the AP to send us all the buffered frames.
+ *
+ * Note that while local->sw_scanning is true everything else but
+ * nullfunc frames and probe requests will be dropped in
+ * ieee80211_tx_h_check_assoc().
+ */
+ drv_sw_scan_start(local);
+
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!netif_running(sdata->dev))
+ continue;
+
+ /* disable beaconing */
+ if (sdata->vif.type == NL80211_IFTYPE_AP ||
+ sdata->vif.type == NL80211_IFTYPE_ADHOC ||
+ sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+ ieee80211_bss_info_change_notify(
+ sdata, BSS_CHANGED_BEACON_ENABLED);
+
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) {
+ netif_tx_stop_all_queues(sdata->dev);
+ ieee80211_scan_ps_enable(sdata);
+ }
+ } else
+ netif_tx_stop_all_queues(sdata->dev);
+ }
+ mutex_unlock(&local->iflist_mtx);
+
+ local->scan_state = SCAN_SET_CHANNEL;
+ local->scan_channel_idx = 0;
+
+ netif_addr_lock_bh(local->mdev);
+ local->filter_flags |= FIF_BCN_PRBRESP_PROMISC;
+ drv_configure_filter(local, FIF_BCN_PRBRESP_PROMISC,
+ &local->filter_flags,
+ local->mdev->mc_count,
+ local->mdev->mc_list);
+ netif_addr_unlock_bh(local->mdev);
+
+ /* TODO: start scan as soon as all nullfunc frames are ACKed */
+ queue_delayed_work(local->hw.workqueue, &local->scan_work,
+ IEEE80211_CHANNEL_TIME);
+
+ return 0;
+}
+
+
+static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_scan_request *req)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ int rc;
+
+ if (local->scan_req)
+ return -EBUSY;
+
+ if (local->ops->hw_scan) {
+ u8 *ies;
+ int ielen;
+
+ ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN +
+ local->scan_ies_len + req->ie_len, GFP_KERNEL);
+ if (!ies)
+ return -ENOMEM;
+
+ ielen = ieee80211_build_preq_ies(local, ies,
+ req->ie, req->ie_len);
+ local->orig_ies = req->ie;
+ local->orig_ies_len = req->ie_len;
+ req->ie = ies;
+ req->ie_len = ielen;
+ }
+
+ local->scan_req = req;
+ local->scan_sdata = sdata;
+
+ if (req != &local->int_scan_req &&
+ sdata->vif.type == NL80211_IFTYPE_STATION &&
+ (ifmgd->state == IEEE80211_STA_MLME_DIRECT_PROBE ||
+ ifmgd->state == IEEE80211_STA_MLME_AUTHENTICATE ||
+ ifmgd->state == IEEE80211_STA_MLME_ASSOCIATE)) {
+ /* actually wait for the assoc to finish/time out */
+ set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
+ return 0;
+ }
+
+ if (local->ops->hw_scan)
+ local->hw_scanning = true;
+ else
+ local->sw_scanning = true;
+ /*
+ * Kicking off the scan need not be protected,
+ * only the scan variable stuff, since now
+ * local->scan_req is assigned and other callers
+ * will abort their scan attempts.
+ *
+ * This avoids getting a scan_mtx -> iflist_mtx
+ * dependency, so that the scan completed calls
+ * have more locking freedom.
+ */
+
+ ieee80211_recalc_idle(local);
+ mutex_unlock(&local->scan_mtx);
+
+ if (local->ops->hw_scan)
+ rc = drv_hw_scan(local, local->scan_req);
+ else
+ rc = ieee80211_start_sw_scan(local);
+
+ mutex_lock(&local->scan_mtx);
+
+ if (rc) {
+ if (local->ops->hw_scan) {
+ local->hw_scanning = false;
+ ieee80211_restore_scan_ies(local);
+ } else
+ local->sw_scanning = false;
+
+ ieee80211_recalc_idle(local);
+
+ local->scan_req = NULL;
+ local->scan_sdata = NULL;
+ }
+
+ return rc;
+}
+
void ieee80211_scan_work(struct work_struct *work)
{
struct ieee80211_local *local =
@@ -363,17 +500,41 @@ void ieee80211_scan_work(struct work_struct *work)
int skip, i;
unsigned long next_delay = 0;
+ mutex_lock(&local->scan_mtx);
+ if (!sdata || !local->scan_req) {
+ mutex_unlock(&local->scan_mtx);
+ return;
+ }
+
+ if (local->scan_req && !(local->sw_scanning || local->hw_scanning)) {
+ struct cfg80211_scan_request *req = local->scan_req;
+ int rc;
+
+ local->scan_req = NULL;
+
+ rc = __ieee80211_start_scan(sdata, req);
+ mutex_unlock(&local->scan_mtx);
+
+ if (rc)
+ ieee80211_scan_completed(&local->hw, true);
+ return;
+ }
+
+ mutex_unlock(&local->scan_mtx);
+
/*
* Avoid re-scheduling when the sdata is going away.
*/
- if (!netif_running(sdata->dev))
+ if (!netif_running(sdata->dev)) {
+ ieee80211_scan_completed(&local->hw, true);
return;
+ }
switch (local->scan_state) {
case SCAN_SET_CHANNEL:
/* if no more bands/channels left, complete scan */
if (local->scan_channel_idx >= local->scan_req->n_channels) {
- ieee80211_scan_completed(local_to_hw(local), false);
+ ieee80211_scan_completed(&local->hw, false);
return;
}
skip = 0;
@@ -422,166 +583,35 @@ void ieee80211_scan_work(struct work_struct *work)
next_delay);
}
-
-int ieee80211_start_scan(struct ieee80211_sub_if_data *scan_sdata,
- struct cfg80211_scan_request *req)
+int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
+ struct cfg80211_scan_request *req)
{
- struct ieee80211_local *local = scan_sdata->local;
- struct ieee80211_sub_if_data *sdata;
-
- if (!req)
- return -EINVAL;
-
- if (local->scan_req && local->scan_req != req)
- return -EBUSY;
-
- local->scan_req = req;
+ int res;
- /* MLME-SCAN.request (page 118) page 144 (11.1.3.1)
- * BSSType: INFRASTRUCTURE, INDEPENDENT, ANY_BSS
- * BSSID: MACAddress
- * SSID
- * ScanType: ACTIVE, PASSIVE
- * ProbeDelay: delay (in microseconds) to be used prior to transmitting
- * a Probe frame during active scanning
- * ChannelList
- * MinChannelTime (>= ProbeDelay), in TU
- * MaxChannelTime: (>= MinChannelTime), in TU
- */
+ mutex_lock(&sdata->local->scan_mtx);
+ res = __ieee80211_start_scan(sdata, req);
+ mutex_unlock(&sdata->local->scan_mtx);
- /* MLME-SCAN.confirm
- * BSSDescriptionSet
- * ResultCode: SUCCESS, INVALID_PARAMETERS
- */
-
- if (local->sw_scanning || local->hw_scanning) {
- if (local->scan_sdata == scan_sdata)
- return 0;
- return -EBUSY;
- }
-
- if (local->ops->hw_scan) {
- u8 *ies;
- int rc, ielen;
-
- ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN +
- local->scan_ies_len + req->ie_len, GFP_KERNEL);
- if (!ies)
- return -ENOMEM;
-
- ielen = ieee80211_build_preq_ies(local, ies,
- req->ie, req->ie_len);
- local->orig_ies = req->ie;
- local->orig_ies_len = req->ie_len;
- req->ie = ies;
- req->ie_len = ielen;
-
- local->hw_scanning = true;
- rc = local->ops->hw_scan(local_to_hw(local), req);
- if (rc) {
- local->hw_scanning = false;
- kfree(ies);
- req->ie_len = local->orig_ies_len;
- req->ie = local->orig_ies;
- return rc;
- }
- local->scan_sdata = scan_sdata;
- return 0;
- }
-
- /*
- * Hardware/driver doesn't support hw_scan, so use software
- * scanning instead. First send a nullfunc frame with power save
- * bit on so that AP will buffer the frames for us while we are not
- * listening, then send probe requests to each channel and wait for
- * the responses. After all channels are scanned, tune back to the
- * original channel and send a nullfunc frame with power save bit
- * off to trigger the AP to send us all the buffered frames.
- *
- * Note that while local->sw_scanning is true everything else but
- * nullfunc frames and probe requests will be dropped in
- * ieee80211_tx_h_check_assoc().
- */
- local->sw_scanning = true;
- if (local->ops->sw_scan_start)
- local->ops->sw_scan_start(local_to_hw(local));
-
- mutex_lock(&local->iflist_mtx);
- list_for_each_entry(sdata, &local->interfaces, list) {
- if (!netif_running(sdata->dev))
- continue;
-
- /* disable beaconing */
- if (sdata->vif.type == NL80211_IFTYPE_AP ||
- sdata->vif.type == NL80211_IFTYPE_ADHOC ||
- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
- ieee80211_if_config(sdata,
- IEEE80211_IFCC_BEACON_ENABLED);
-
- if (sdata->vif.type == NL80211_IFTYPE_STATION) {
- if (sdata->u.mgd.flags & IEEE80211_STA_ASSOCIATED) {
- netif_tx_stop_all_queues(sdata->dev);
- ieee80211_scan_ps_enable(sdata);
- }
- } else
- netif_tx_stop_all_queues(sdata->dev);
- }
- mutex_unlock(&local->iflist_mtx);
-
- local->scan_state = SCAN_SET_CHANNEL;
- local->scan_channel_idx = 0;
- local->scan_sdata = scan_sdata;
- local->scan_req = req;
-
- netif_addr_lock_bh(local->mdev);
- local->filter_flags |= FIF_BCN_PRBRESP_PROMISC;
- local->ops->configure_filter(local_to_hw(local),
- FIF_BCN_PRBRESP_PROMISC,
- &local->filter_flags,
- local->mdev->mc_count,
- local->mdev->mc_list);
- netif_addr_unlock_bh(local->mdev);
-
- /* TODO: start scan as soon as all nullfunc frames are ACKed */
- queue_delayed_work(local->hw.workqueue, &local->scan_work,
- IEEE80211_CHANNEL_TIME);
-
- return 0;
+ return res;
}
-
-int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
- struct cfg80211_scan_request *req)
+int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
+ const u8 *ssid, u8 ssid_len)
{
struct ieee80211_local *local = sdata->local;
- struct ieee80211_if_managed *ifmgd;
-
- if (!req)
- return -EINVAL;
-
- if (local->scan_req && local->scan_req != req)
- return -EBUSY;
-
- local->scan_req = req;
+ int ret = -EBUSY;
- if (sdata->vif.type != NL80211_IFTYPE_STATION)
- return ieee80211_start_scan(sdata, req);
+ mutex_lock(&local->scan_mtx);
- /*
- * STA has a state machine that might need to defer scanning
- * while it's trying to associate/authenticate, therefore we
- * queue it up to the state machine in that case.
- */
+ /* busy scanning */
+ if (local->scan_req)
+ goto unlock;
- if (local->sw_scanning || local->hw_scanning) {
- if (local->scan_sdata == sdata)
- return 0;
- return -EBUSY;
- }
-
- ifmgd = &sdata->u.mgd;
- set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
- queue_work(local->hw.workqueue, &ifmgd->work);
+ memcpy(local->int_scan_req.ssids[0].ssid, ssid, IEEE80211_MAX_SSID_LEN);
+ local->int_scan_req.ssids[0].ssid_len = ssid_len;
- return 0;
+ ret = __ieee80211_start_scan(sdata, &sdata->local->int_scan_req);
+ unlock:
+ mutex_unlock(&local->scan_mtx);
+ return ret;
}
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 654a8e963cc..a98ea273a15 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -19,6 +19,7 @@
#include <net/mac80211.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "rate.h"
#include "sta_info.h"
#include "debugfs_sta.h"
@@ -346,8 +347,7 @@ int sta_info_insert(struct sta_info *sta)
struct ieee80211_sub_if_data,
u.ap);
- local->ops->sta_notify(local_to_hw(local), &sdata->vif,
- STA_NOTIFY_ADD, &sta->sta);
+ drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD, &sta->sta);
}
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
@@ -405,8 +405,7 @@ static void __sta_info_set_tim_bit(struct ieee80211_if_ap *bss,
if (sta->local->ops->set_tim) {
sta->local->tim_in_locked_section = true;
- sta->local->ops->set_tim(local_to_hw(sta->local),
- &sta->sta, true);
+ drv_set_tim(sta->local, &sta->sta, true);
sta->local->tim_in_locked_section = false;
}
}
@@ -431,8 +430,7 @@ static void __sta_info_clear_tim_bit(struct ieee80211_if_ap *bss,
if (sta->local->ops->set_tim) {
sta->local->tim_in_locked_section = true;
- sta->local->ops->set_tim(local_to_hw(sta->local),
- &sta->sta, false);
+ drv_set_tim(sta->local, &sta->sta, false);
sta->local->tim_in_locked_section = false;
}
}
@@ -482,8 +480,8 @@ static void __sta_info_unlink(struct sta_info **sta)
struct ieee80211_sub_if_data,
u.ap);
- local->ops->sta_notify(local_to_hw(local), &sdata->vif,
- STA_NOTIFY_REMOVE, &(*sta)->sta);
+ drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE,
+ &(*sta)->sta);
}
if (ieee80211_vif_is_mesh(&sdata->vif)) {
@@ -543,9 +541,8 @@ void sta_info_unlink(struct sta_info **sta)
spin_unlock_irqrestore(&local->sta_lock, flags);
}
-static inline int sta_info_buffer_expired(struct ieee80211_local *local,
- struct sta_info *sta,
- struct sk_buff *skb)
+static int sta_info_buffer_expired(struct sta_info *sta,
+ struct sk_buff *skb)
{
struct ieee80211_tx_info *info;
int timeout;
@@ -556,8 +553,9 @@ static inline int sta_info_buffer_expired(struct ieee80211_local *local,
info = IEEE80211_SKB_CB(skb);
/* Timeout: (2 * listen_interval * beacon_int * 1024 / 1000000) sec */
- timeout = (sta->listen_interval * local->hw.conf.beacon_int * 32 /
- 15625) * HZ;
+ timeout = (sta->listen_interval *
+ sta->sdata->vif.bss_conf.beacon_int *
+ 32 / 15625) * HZ;
if (timeout < STA_TX_BUFFER_EXPIRE)
timeout = STA_TX_BUFFER_EXPIRE;
return time_after(jiffies, info->control.jiffies + timeout);
@@ -577,7 +575,7 @@ static void sta_info_cleanup_expire_buffered(struct ieee80211_local *local,
for (;;) {
spin_lock_irqsave(&sta->ps_tx_buf.lock, flags);
skb = skb_peek(&sta->ps_tx_buf);
- if (sta_info_buffer_expired(local, sta, skb))
+ if (sta_info_buffer_expired(sta, skb))
skb = __skb_dequeue(&sta->ps_tx_buf);
else
skb = NULL;
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 31a8990ce40..164b16cbe0a 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -88,6 +88,7 @@ struct tid_ampdu_tx {
* struct tid_ampdu_rx - TID aggregation information (Rx).
*
* @reorder_buf: buffer to reorder incoming aggregated MPDUs
+ * @reorder_time: jiffies when skb was added
* @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
* @head_seq_num: head sequence number in reordering buffer.
* @stored_mpdu_num: number of MPDUs in reordering buffer
@@ -99,6 +100,7 @@ struct tid_ampdu_tx {
*/
struct tid_ampdu_rx {
struct sk_buff **reorder_buf;
+ unsigned long *reorder_time;
struct timer_list session_timer;
u16 head_seq_num;
u16 stored_mpdu_num;
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index 38fa111d2dc..964b7faa7f1 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -13,6 +13,7 @@
#include <asm/unaligned.h>
#include <net/mac80211.h>
+#include "driver-ops.h"
#include "key.h"
#include "tkip.h"
#include "wep.h"
@@ -307,9 +308,8 @@ int ieee80211_tkip_decrypt_data(struct crypto_blkcipher *tfm,
if (is_multicast_ether_addr(ra))
sta_addr = bcast;
- key->local->ops->update_tkip_key(
- local_to_hw(key->local), &key->conf,
- sta_addr, iv32, key->u.tkip.rx[queue].p1k);
+ drv_update_tkip_key(key->local, &key->conf, sta_addr,
+ iv32, key->u.tkip.rx[queue].p1k);
}
}
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index e5b148fe24b..5f9a8d7af83 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -25,6 +25,7 @@
#include <asm/unaligned.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "led.h"
#include "mesh.h"
#include "wep.h"
@@ -557,6 +558,10 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
if (unlikely(!info->control.rates[0].count))
info->control.rates[0].count = 1;
+ if (WARN_ON_ONCE((info->control.rates[0].count > 1) &&
+ (info->flags & IEEE80211_TX_CTL_NO_ACK)))
+ info->control.rates[0].count = 1;
+
if (is_multicast_ether_addr(hdr->addr1)) {
/*
* XXX: verify the rate is in the basic rateset
@@ -1162,7 +1167,7 @@ static int __ieee80211_tx(struct ieee80211_local *local,
next = skb->next;
len = skb->len;
- ret = local->ops->tx(local_to_hw(local), skb);
+ ret = drv_tx(local, skb);
if (WARN_ON(ret != NETDEV_TX_OK && skb->len != len)) {
dev_kfree_skb(skb);
ret = NETDEV_TX_OK;
@@ -2132,7 +2137,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
/* BSSID is left zeroed, wildcard value */
mgmt->u.beacon.beacon_int =
- cpu_to_le16(local->hw.conf.beacon_int);
+ cpu_to_le16(sdata->vif.bss_conf.beacon_int);
mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */
pos = skb_put(skb, 2);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 61876eb50b4..97b613affe0 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -26,6 +26,7 @@
#include <net/rtnetlink.h>
#include "ieee80211_i.h"
+#include "driver-ops.h"
#include "rate.h"
#include "mesh.h"
#include "wme.h"
@@ -726,7 +727,7 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata)
qparam.txop = 0;
for (i = 0; i < local_to_hw(local)->queues; i++)
- local->ops->conf_tx(local_to_hw(local), i, &qparam);
+ drv_conf_tx(local, i, &qparam);
}
void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata,
@@ -1000,7 +1001,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
/* restart hardware */
if (local->open_count) {
- res = local->ops->start(hw);
+ res = drv_start(local);
ieee80211_led_radio(local, hw->conf.radio_enabled);
}
@@ -1013,7 +1014,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
conf.vif = &sdata->vif;
conf.type = sdata->vif.type;
conf.mac_addr = sdata->dev->dev_addr;
- res = local->ops->add_interface(hw, &conf);
+ res = drv_add_interface(local, &conf);
}
}
@@ -1026,8 +1027,8 @@ int ieee80211_reconfig(struct ieee80211_local *local)
struct ieee80211_sub_if_data,
u.ap);
- local->ops->sta_notify(hw, &sdata->vif,
- STA_NOTIFY_ADD, &sta->sta);
+ drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD,
+ &sta->sta);
}
spin_unlock_irqrestore(&local->sta_lock, flags);
}
@@ -1045,8 +1046,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
rcu_read_unlock();
/* setup RTS threshold */
- if (local->ops->set_rts_threshold)
- local->ops->set_rts_threshold(hw, hw->wiphy->rts_threshold);
+ drv_set_rts_threshold(local, hw->wiphy->rts_threshold);
/* reconfigure hardware */
ieee80211_hw_config(local, ~0);
@@ -1063,24 +1063,13 @@ int ieee80211_reconfig(struct ieee80211_local *local)
switch (sdata->vif.type) {
case NL80211_IFTYPE_STATION:
/* disable beacon change bits */
- changed &= ~IEEE80211_IFCC_BEACON;
+ changed &= ~(BSS_CHANGED_BEACON |
+ BSS_CHANGED_BEACON_ENABLED);
/* fall through */
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
- /*
- * Driver's config_interface can fail if rfkill is
- * enabled. Accommodate this return code.
- * FIXME: When mac80211 has knowledge of rfkill
- * state the code below can change back to:
- * WARN(ieee80211_if_config(sdata, changed));
- * ieee80211_bss_info_change_notify(sdata, ~0);
- */
- if (ieee80211_if_config(sdata, changed))
- printk(KERN_DEBUG "%s: failed to configure interface during resume\n",
- sdata->dev->name);
- else
- ieee80211_bss_info_change_notify(sdata, ~0);
+ ieee80211_bss_info_change_notify(sdata, changed);
break;
case NL80211_IFTYPE_WDS:
break;
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 1a649da42c4..6b4eb8d43a4 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -185,7 +185,7 @@ static int ieee80211_ioctl_giwfreq(struct net_device *dev,
if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
return cfg80211_ibss_wext_giwfreq(dev, info, freq, extra);
- freq->m = local->hw.conf.channel->center_freq;
+ freq->m = local->oper_channel->center_freq;
freq->e = 6;
return 0;
diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
index e2d4510623f..4f5a83183c9 100644
--- a/net/rfkill/rfkill.c
+++ b/net/rfkill/rfkill.c
@@ -75,6 +75,11 @@ static void rfkill_led_trigger_activate(struct led_classdev *led)
rfkill_led_trigger(rfkill, rfkill->state);
}
+#else
+static inline void rfkill_led_trigger(struct rfkill *rfkill,
+ enum rfkill_state state)
+{
+}
#endif /* CONFIG_RFKILL_LEDS */
static void rfkill_uevent(struct rfkill *rfkill)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b1fc98225fd..3c53c5cbc3a 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3696,9 +3696,9 @@ void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
NL80211_CMD_DISASSOCIATE);
}
-void nl80211_send_mlme_timeout(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, int cmd,
- const u8 *addr)
+static void nl80211_send_mlme_timeout(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, int cmd,
+ const u8 *addr)
{
struct sk_buff *msg;
void *hdr;
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 139d13fdc94..537af62ec42 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2113,14 +2113,14 @@ void reg_device_remove(struct wiphy *wiphy)
assert_cfg80211_lock();
+ kfree(wiphy->regd);
+
if (last_request)
request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
- kfree(wiphy->regd);
- if (!last_request || !request_wiphy)
- return;
- if (request_wiphy != wiphy)
+ if (!request_wiphy || request_wiphy != wiphy)
return;
+
last_request->wiphy_idx = WIPHY_IDX_STALE;
last_request->country_ie_env = ENVIRON_ANY;
}
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index dfb53d19fd7..df59440290e 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -377,18 +377,16 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
size_t used = dev->wiphy.bss_priv_size + sizeof(*res);
size_t ielen = res->pub.len_information_elements;
- if (ksize(found) >= used + ielen) {
+ if (!found->ies_allocated && ksize(found) >= used + ielen) {
memcpy(found->pub.information_elements,
res->pub.information_elements, ielen);
found->pub.len_information_elements = ielen;
} else {
u8 *ies = found->pub.information_elements;
- if (found->ies_allocated) {
- if (ksize(ies) < ielen)
- ies = krealloc(ies, ielen,
- GFP_ATOMIC);
- } else
+ if (found->ies_allocated)
+ ies = krealloc(ies, ielen, GFP_ATOMIC);
+ else
ies = kmalloc(ielen, GFP_ATOMIC);
if (ies) {