aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig5
-rw-r--r--arch/arm/Kconfig.debug8
-rw-r--r--arch/arm/configs/zeus_defconfig2032
-rw-r--r--arch/arm/kernel/Makefile1
-rw-r--r--arch/arm/kernel/early_printk.c57
-rw-r--r--arch/arm/kernel/smp_twd.c1
-rw-r--r--arch/arm/mach-clps711x/include/mach/memory.h2
-rw-r--r--arch/arm/mach-footbridge/common.c22
-rw-r--r--arch/arm/mach-footbridge/include/mach/memory.h15
-rw-r--r--arch/arm/mach-integrator/include/mach/memory.h3
-rw-r--r--arch/arm/mach-ixp2000/include/mach/memory.h12
-rw-r--r--arch/arm/mach-ixp23xx/include/mach/memory.h19
-rw-r--r--arch/arm/mach-lh7a40x/clocks.c8
-rw-r--r--arch/arm/mach-pxa/Kconfig14
-rw-r--r--arch/arm/mach-pxa/Makefile1
-rw-r--r--arch/arm/mach-pxa/em-x270.c11
-rw-r--r--arch/arm/mach-pxa/include/mach/arcom-pcmcia.h11
-rw-r--r--arch/arm/mach-pxa/include/mach/viper.h2
-rw-r--r--arch/arm/mach-pxa/include/mach/zeus.h82
-rw-r--r--arch/arm/mach-pxa/viper.c20
-rw-r--r--arch/arm/mach-pxa/zeus.c820
-rw-r--r--arch/arm/mach-realview/Kconfig2
-rw-r--r--arch/arm/mach-s3c24a0/include/mach/memory.h2
-rw-r--r--arch/arm/mach-sa1100/Kconfig13
-rw-r--r--arch/arm/mach-sa1100/generic.c12
-rw-r--r--arch/arm/vfp/vfpmodule.c83
-rw-r--r--drivers/pcmcia/Kconfig2
-rw-r--r--drivers/pcmcia/Makefile2
-rw-r--r--drivers/pcmcia/pxa2xx_base.c19
-rw-r--r--drivers/pcmcia/pxa2xx_base.h3
-rw-r--r--drivers/pcmcia/pxa2xx_palmtc.c2
-rw-r--r--drivers/pcmcia/pxa2xx_stargate2.c2
-rw-r--r--drivers/pcmcia/pxa2xx_viper.c119
33 files changed, 3275 insertions, 132 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cf8a99f19dc..233a222752c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -603,6 +603,7 @@ config ARCH_SA1100
select ARCH_SPARSEMEM_ENABLE
select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
+ select CPU_FREQ
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
@@ -1359,13 +1360,9 @@ source "drivers/cpufreq/Kconfig"
config CPU_FREQ_SA1100
bool
- depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
- default y
config CPU_FREQ_SA1110
bool
- depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
- default y
config CPU_FREQ_INTEGRATOR
tristate "CPUfreq driver for ARM Integrator CPUs"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index ff54c23d085..5cb9326df7a 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -71,6 +71,14 @@ config DEBUG_LL
in the kernel. This is helpful if you are debugging code that
executes before the console is initialized.
+config EARLY_PRINTK
+ bool "Early printk"
+ depends on DEBUG_LL
+ help
+ Say Y here if you want to have an early console using the
+ kernel low-level debugging functions. Add earlyprintk to your
+ kernel parameters to enable this console.
+
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
depends on DEBUG_LL
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
new file mode 100644
index 00000000000..823b11e7091
--- /dev/null
+++ b/arch/arm/configs/zeus_defconfig
@@ -0,0 +1,2032 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Dec 8 20:27:05 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=13
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Intel/Marvell Dev Platforms (sorted by hardware release time)
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_ZYLONITE300 is not set
+# CONFIG_MACH_ZYLONITE320 is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+
+#
+# Third Party Dev Platforms (sorted by vendor name)
+#
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_VIPER is not set
+CONFIG_MACH_ARCOM_ZEUS=y
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_TRIZEPS_PXA is not set
+CONFIG_ARCOM_PCMCIA=y
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+
+#
+# End-user Products (sorted by vendor name)
+#
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_PXA_EZX is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PXA_HAVE_ISA_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_SOC_COMMON=m
+CONFIG_PCMCIA_PXA2XX=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA_PROBE=y
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+# CONFIG_BT_SCO is not set
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_LEGACY is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+CONFIG_HERMES=m
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_RT2X00=m
+# CONFIG_RT2500USB is not set
+CONFIG_RT73USB=m
+# CONFIG_RT2800USB is not set
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+CONFIG_TOUCHSCREEN_FUJITSU=m
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+CONFIG_TOUCHSCREEN_ELO=m
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=7
+CONFIG_SERIAL_8250_RUNTIME_UARTS=7
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_PXA is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM75=m
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SA1100_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=m
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=m
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
+CONFIG_SND_PXA2XX_AC97=m
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_PCMCIA is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=m
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_ISL1208=m
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=m
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index e7ccf7e697c..dd00f747e2a 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -54,5 +54,6 @@ endif
head-y := head$(MMUEXT).o
obj-$(CONFIG_DEBUG_LL) += debug.o
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
extra-y := $(head-y) init_task.o vmlinux.lds
diff --git a/arch/arm/kernel/early_printk.c b/arch/arm/kernel/early_printk.c
new file mode 100644
index 00000000000..85aa2b29269
--- /dev/null
+++ b/arch/arm/kernel/early_printk.c
@@ -0,0 +1,57 @@
+/*
+ * linux/arch/arm/kernel/early_printk.c
+ *
+ * Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/init.h>
+
+extern void printch(int);
+
+static void early_write(const char *s, unsigned n)
+{
+ while (n-- > 0) {
+ if (*s == '\n')
+ printch('\r');
+ printch(*s);
+ s++;
+ }
+}
+
+static void early_console_write(struct console *con, const char *s, unsigned n)
+{
+ early_write(s, n);
+}
+
+static struct console early_console = {
+ .name = "earlycon",
+ .write = early_console_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT,
+ .index = -1,
+};
+
+asmlinkage void early_printk(const char *fmt, ...)
+{
+ char buf[512];
+ int n;
+ va_list ap;
+
+ va_start(ap, fmt);
+ n = vscnprintf(buf, sizeof(buf), fmt, ap);
+ early_write(buf, n);
+ va_end(ap);
+}
+
+static int __init setup_early_printk(char *buf)
+{
+ register_console(&early_console);
+ return 0;
+}
+
+early_param("earlyprintk", setup_early_printk);
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index a73a34dccf2..ea02a7b1c24 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -160,6 +160,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
/* Make sure our local interrupt controller has this enabled */
local_irq_save(flags);
+ irq_to_desc(clk->irq)->status |= IRQ_NOPROBE;
get_irq_chip(clk->irq)->unmask(clk->irq);
local_irq_restore(flags);
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
index e522b20bcbc..f70d52be48a 100644
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -30,6 +30,8 @@
#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
+#define __pfn_to_bus(x) (__pfn_to_phys(x) - PHYS_OFFSET)
+#define __bus_to_pfn(x) __phys_to_pfn((x) + PHYS_OFFSET)
#endif
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index b97f529e58e..41febc796b1 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -201,6 +201,11 @@ void __init footbridge_map_io(void)
#ifdef CONFIG_FOOTBRIDGE_ADDIN
+static inline unsigned long fb_bus_sdram_offset(void)
+{
+ return *CSR_PCISDRAMBASE & 0xfffffff0;
+}
+
/*
* These two functions convert virtual addresses to PCI addresses and PCI
* addresses to virtual addresses. Note that it is only legal to use these
@@ -210,14 +215,13 @@ unsigned long __virt_to_bus(unsigned long res)
{
WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
- return (res - PAGE_OFFSET) + (*CSR_PCISDRAMBASE & 0xfffffff0);
+ return res + (fb_bus_sdram_offset() - PAGE_OFFSET);
}
EXPORT_SYMBOL(__virt_to_bus);
unsigned long __bus_to_virt(unsigned long res)
{
- res -= (*CSR_PCISDRAMBASE & 0xfffffff0);
- res += PAGE_OFFSET;
+ res = res - (fb_bus_sdram_offset() - PAGE_OFFSET);
WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
@@ -225,4 +229,16 @@ unsigned long __bus_to_virt(unsigned long res)
}
EXPORT_SYMBOL(__bus_to_virt);
+unsigned long __pfn_to_bus(unsigned long pfn)
+{
+ return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
+}
+EXPORT_SYMBOL(__pfn_to_bus);
+
+unsigned long __bus_to_pfn(unsigned long bus)
+{
+ return __phys_to_pfn(bus - (fb_bus_sdram_offset() - PHYS_OFFSET));
+}
+EXPORT_SYMBOL(__bus_to_pfn);
+
#endif
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index cb16e59d87b..8d64f457408 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -29,6 +29,8 @@
#ifndef __ASSEMBLY__
extern unsigned long __virt_to_bus(unsigned long);
extern unsigned long __bus_to_virt(unsigned long);
+extern unsigned long __pfn_to_bus(unsigned long);
+extern unsigned long __bus_to_pfn(unsigned long);
#endif
#define __virt_to_bus __virt_to_bus
#define __bus_to_virt __bus_to_virt
@@ -36,14 +38,15 @@ extern unsigned long __bus_to_virt(unsigned long);
#elif defined(CONFIG_FOOTBRIDGE_HOST)
/*
- * The footbridge is programmed to expose the system RAM at the corresponding
- * address. So, if PAGE_OFFSET is 0xc0000000, RAM appears at 0xe0000000.
- * If 0x80000000, then its exposed at 0xa0000000 on the bus. etc.
- * The only requirement is that the RAM isn't placed at bus address 0 which
+ * The footbridge is programmed to expose the system RAM at 0xe0000000.
+ * The requirement is that the RAM isn't placed at bus address 0, which
* would clash with VGA cards.
*/
-#define __virt_to_bus(x) ((x) - 0xe0000000)
-#define __bus_to_virt(x) ((x) + 0xe0000000)
+#define BUS_OFFSET 0xe0000000
+#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET))
+#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET))
+#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
+#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
#else
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
index 4891828454f..991f24d2c11 100644
--- a/arch/arm/mach-integrator/include/mach/memory.h
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -28,6 +28,7 @@
#define BUS_OFFSET UL(0x80000000)
#define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET)
#define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET)
-#define __pfn_to_bus(x) (((x) << PAGE_SHIFT) + BUS_OFFSET)
+#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
+#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h
index aee7eb8a71b..98e3471be15 100644
--- a/arch/arm/mach-ixp2000/include/mach/memory.h
+++ b/arch/arm/mach-ixp2000/include/mach/memory.h
@@ -17,11 +17,15 @@
#include <mach/ixp2000-regs.h>
-#define __virt_to_bus(v) \
- (((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
+#define IXP2000_PCI_SDRAM_OFFSET (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)
-#define __bus_to_virt(b) \
- __phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
+#define __phys_to_bus(x) ((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+#define __bus_to_phys(x) ((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+
+#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
+#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
+#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
+#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
index fdd138706c7..94a3a86cfeb 100644
--- a/arch/arm/mach-ixp23xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp23xx/include/mach/memory.h
@@ -19,16 +19,15 @@
*/
#define PHYS_OFFSET (0x00000000)
-#define __virt_to_bus(v) \
- ({ unsigned int ret; \
- ret = ((__virt_to_phys(v) - 0x00000000) + \
- (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); \
- ret; })
-
-#define __bus_to_virt(b) \
- ({ unsigned int data; \
- data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \
- __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
+#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0))
+
+#define __phys_to_bus(x) ((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+#define __bus_to_phys(x) ((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+
+#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
+#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
+#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
+#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
#define arch_is_coherent() 1
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
index 6182f5410b4..fcaf876f19b 100644
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ b/arch/arm/mach-lh7a40x/clocks.c
@@ -7,8 +7,6 @@
* version 2 as published by the Free Software Foundation.
*
*/
-
-#include <linux/cpufreq.h>
#include <mach/hardware.h>
#include <mach/clocks.h>
#include <linux/err.h>
@@ -31,12 +29,6 @@ struct clk {
#define HCLKDIV(c) (((c) >> 0) & 0x02)
#define PCLKDIV(c) (((c) >> 16) & 0x03)
-unsigned int cpufreq_get (unsigned int cpu) /* in kHz */
-{
- return fclkfreq_get ()/1000;
-}
-EXPORT_SYMBOL(cpufreq_get);
-
unsigned int fclkfreq_get (void)
{
unsigned int clkset = CSC_CLKSET;
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index d89c6adbe8b..e6d8e10ae5d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -63,6 +63,15 @@ config ARCH_VIPER
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
+ select ARCOM_PCMCIA
+
+config MACH_ARCOM_ZEUS
+ bool "Arcom/Eurotech ZEUS SBC"
+ select PXA27x
+ select ISA
+ select PXA_HAVE_BOARD_IRQS
+ select PXA_HAVE_ISA_IRQS
+ select ARCOM_PCMCIA
config MACH_BALLOON3
bool "Balloon 3 board"
@@ -179,6 +188,11 @@ config MACH_TRIZEPS_ANY
endchoice
+config ARCOM_PCMCIA
+ bool
+ help
+ Generic option for Arcom Viper/Zeus PCMCIA
+
config TRIZEPS_PCMCIA
bool
help
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index b5d29e60a34..f64afda7e6f 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_MACH_SAAR) += saar.o
# 3rd Party Dev Platforms
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
+obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o
obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
obj-$(CONFIG_MACH_CSB726) += csb726.o
obj-$(CONFIG_CSB726_CSB701) += csb701.o
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 1c0de808b54..c8a01bc85fd 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -497,16 +497,15 @@ static int em_x270_usb_hub_init(void)
goto err_free_vbus_gpio;
/* USB Hub power-on and reset */
- gpio_direction_output(usb_hub_reset, 0);
+ gpio_direction_output(usb_hub_reset, 1);
+ gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
regulator_enable(em_x270_usb_ldo);
- gpio_set_value(usb_hub_reset, 1);
gpio_set_value(usb_hub_reset, 0);
+ gpio_set_value(usb_hub_reset, 1);
regulator_disable(em_x270_usb_ldo);
regulator_enable(em_x270_usb_ldo);
- gpio_set_value(usb_hub_reset, 1);
-
- /* enable VBUS */
- gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
+ gpio_set_value(usb_hub_reset, 0);
+ gpio_set_value(GPIO9_USB_VBUS_EN, 1);
return 0;
diff --git a/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
new file mode 100644
index 00000000000..d428be4db44
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
@@ -0,0 +1,11 @@
+#ifndef __ARCOM_PCMCIA_H
+#define __ARCOM_PCMCIA_H
+
+struct arcom_pcmcia_pdata {
+ int cd_gpio;
+ int rdy_gpio;
+ int pwr_gpio;
+ void (*reset)(int state);
+};
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h
index 10988c270ca..5f5fbf1f648 100644
--- a/arch/arm/mach-pxa/include/mach/viper.h
+++ b/arch/arm/mach-pxa/include/mach/viper.h
@@ -85,8 +85,6 @@
/* Interrupt and Configuration Register (VIPER_ICR) */
/* This is a write only register. Only CF_RST is used under Linux */
-extern void viper_cf_rst(int state);
-
#define VIPER_ICR_RETRIG (1 << 0)
#define VIPER_ICR_AUTO_CLR (1 << 1)
#define VIPER_ICR_R_DIS (1 << 2)
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
new file mode 100644
index 00000000000..c387046d2f2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -0,0 +1,82 @@
+/*
+ * arch/arm/mach-pxa/include/mach/zeus.h
+ *
+ * Author: David Vrabel
+ * Created: Sept 28, 2005
+ * Copyright: Arcom Control Systems Ltd.
+ *
+ * Maintained by: Marc Zyngier <maz@misterjones.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _MACH_ZEUS_H
+#define _MACH_ZEUS_H
+
+/* Physical addresses */
+#define ZEUS_FLASH_PHYS PXA_CS0_PHYS
+#define ZEUS_ETH0_PHYS PXA_CS1_PHYS
+#define ZEUS_ETH1_PHYS PXA_CS2_PHYS
+#define ZEUS_CPLD_PHYS (PXA_CS4_PHYS+0x2000000)
+#define ZEUS_SRAM_PHYS PXA_CS5_PHYS
+#define ZEUS_PC104IO_PHYS (0x30000000)
+
+#define ZEUS_CPLD_VERSION_PHYS (ZEUS_CPLD_PHYS + 0x00000000)
+#define ZEUS_CPLD_ISA_IRQ_PHYS (ZEUS_CPLD_PHYS + 0x00800000)
+#define ZEUS_CPLD_CONTROL_PHYS (ZEUS_CPLD_PHYS + 0x01000000)
+#define ZEUS_CPLD_EXTWDOG_PHYS (ZEUS_CPLD_PHYS + 0x01800000)
+
+/* GPIOs */
+#define ZEUS_AC97_GPIO 0
+#define ZEUS_WAKEUP_GPIO 1
+#define ZEUS_UARTA_GPIO 9
+#define ZEUS_UARTB_GPIO 10
+#define ZEUS_UARTC_GPIO 12
+#define ZEUS_UARTD_GPIO 11
+#define ZEUS_ETH0_GPIO 14
+#define ZEUS_ISA_GPIO 17
+#define ZEUS_BKLEN_GPIO 19
+#define ZEUS_USB2_PWREN_GPIO 22
+#define ZEUS_PTT_GPIO 27
+#define ZEUS_CF_CD_GPIO 35
+#define ZEUS_MMC_WP_GPIO 52
+#define ZEUS_MMC_CD_GPIO 53
+#define ZEUS_EXTGPIO_GPIO 91
+#define ZEUS_CF_PWEN_GPIO 97
+#define ZEUS_CF_RDY_GPIO 99
+#define ZEUS_LCD_EN_GPIO 101
+#define ZEUS_ETH1_GPIO 113
+#define ZEUS_CAN_GPIO 116
+
+#define ZEUS_EXT0_GPIO_BASE 128
+#define ZEUS_EXT1_GPIO_BASE 160
+#define ZEUS_USER_GPIO_BASE 192
+
+#define ZEUS_EXT0_GPIO(x) (ZEUS_EXT0_GPIO_BASE + (x))
+#define ZEUS_EXT1_GPIO(x) (ZEUS_EXT1_GPIO_BASE + (x))
+#define ZEUS_USER_GPIO(x) (ZEUS_USER_GPIO_BASE + (x))
+
+/*
+ * CPLD registers:
+ * Only 4 registers, but spreaded over a 32MB address space.
+ * Be gentle, and remap that over 32kB...
+ */
+
+#define ZEUS_CPLD (0xf0000000)
+#define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000)
+#define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000)
+#define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000)
+#define ZEUS_CPLD_EXTWDOG (ZEUS_CPLD + 0x3000)
+
+/* CPLD register bits */
+#define ZEUS_CPLD_CONTROL_CF_RST 0x01
+
+#define ZEUS_PC104IO (0xf1000000)
+
+#define ZEUS_SRAM_SIZE (256 * 1024)
+
+#endif
+
+
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index cf0d71b7797..5352b4e5a7d 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -47,6 +47,7 @@
#include <mach/pxafb.h>
#include <plat/i2c.h>
#include <mach/regs-uart.h>
+#include <mach/arcom-pcmcia.h>
#include <mach/viper.h>
#include <asm/setup.h>
@@ -76,14 +77,28 @@ static void viper_icr_clear_bit(unsigned int bit)
}
/* This function is used from the pcmcia module to reset the CF */
-void viper_cf_rst(int state)
+static void viper_cf_reset(int state)
{
if (state)
viper_icr_set_bit(VIPER_ICR_CF_RST);
else
viper_icr_clear_bit(VIPER_ICR_CF_RST);
}
-EXPORT_SYMBOL(viper_cf_rst);
+
+static struct arcom_pcmcia_pdata viper_pcmcia_info = {
+ .cd_gpio = VIPER_CF_CD_GPIO,
+ .rdy_gpio = VIPER_CF_RDY_GPIO,
+ .pwr_gpio = VIPER_CF_POWER_GPIO,
+ .reset = viper_cf_reset,
+};
+
+static struct platform_device viper_pcmcia_device = {
+ .name = "viper-pcmcia",
+ .id = -1,
+ .dev = {
+ .platform_data = &viper_pcmcia_info,
+ },
+};
/*
* The CPLD version register was not present on VIPER boards prior to
@@ -685,6 +700,7 @@ static struct platform_device *viper_devs[] __initdata = {
&viper_mtd_devices[0],
&viper_mtd_devices[1],
&viper_backlight_device,
+ &viper_pcmcia_device,
};
static mfp_cfg_t viper_pin_config[] __initdata = {
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
new file mode 100644
index 00000000000..5b986a8bd9e
--- /dev/null
+++ b/arch/arm/mach-pxa/zeus.c
@@ -0,0 +1,820 @@
+/*
+ * Support for the Arcom ZEUS.
+ *
+ * Copyright (C) 2006 Arcom Control Systems Ltd.
+ *
+ * Loosely based on Arcom's 2.6.16.28.
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/dm9000.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/i2c.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/regs-uart.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pm.h>
+#include <mach/audio.h>
+#include <mach/arcom-pcmcia.h>
+#include <mach/zeus.h>
+
+#include "generic.h"
+
+/*
+ * Interrupt handling
+ */
+
+static unsigned long zeus_irq_enabled_mask;
+static const int zeus_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, };
+static const int zeus_isa_irq_map[] = {
+ 0, /* ISA irq #0, invalid */
+ 0, /* ISA irq #1, invalid */
+ 0, /* ISA irq #2, invalid */
+ 1 << 0, /* ISA irq #3 */
+ 1 << 1, /* ISA irq #4 */
+ 1 << 2, /* ISA irq #5 */
+ 1 << 3, /* ISA irq #6 */
+ 1 << 4, /* ISA irq #7 */
+ 0, /* ISA irq #8, invalid */
+ 0, /* ISA irq #9, invalid */
+ 1 << 5, /* ISA irq #10 */
+ 1 << 6, /* ISA irq #11 */
+ 1 << 7, /* ISA irq #12 */
+};
+
+static inline int zeus_irq_to_bitmask(unsigned int irq)
+{
+ return zeus_isa_irq_map[irq - PXA_ISA_IRQ(0)];
+}
+
+static inline int zeus_bit_to_irq(int bit)
+{
+ return zeus_isa_irqs[bit] + PXA_ISA_IRQ(0);
+}
+
+static void zeus_ack_irq(unsigned int irq)
+{
+ __raw_writew(zeus_irq_to_bitmask(irq), ZEUS_CPLD_ISA_IRQ);
+}
+
+static void zeus_mask_irq(unsigned int irq)
+{
+ zeus_irq_enabled_mask &= ~(zeus_irq_to_bitmask(irq));
+}
+
+static void zeus_unmask_irq(unsigned int irq)
+{
+ zeus_irq_enabled_mask |= zeus_irq_to_bitmask(irq);
+}
+
+static inline unsigned long zeus_irq_pending(void)
+{
+ return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask;
+}
+
+static void zeus_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long pending;
+
+ pending = zeus_irq_pending();
+ do {
+ /* we're in a chained irq handler,
+ * so ack the interrupt by hand */
+ desc->chip->ack(gpio_to_irq(ZEUS_ISA_GPIO));
+
+ if (likely(pending)) {
+ irq = zeus_bit_to_irq(__ffs(pending));
+ generic_handle_irq(irq);
+ }
+ pending = zeus_irq_pending();
+ } while (pending);
+}
+
+static struct irq_chip zeus_irq_chip = {
+ .name = "ISA",
+ .ack = zeus_ack_irq,
+ .mask = zeus_mask_irq,
+ .unmask = zeus_unmask_irq,
+};
+
+static void __init zeus_init_irq(void)
+{
+ int level;
+ int isa_irq;
+
+ pxa27x_init_irq();
+
+ /* Peripheral IRQs. It would be nice to move those inside driver
+ configuration, but it is not supported at the moment. */
+ set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING);
+ set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING);
+ set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING);
+ set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO), IRQ_TYPE_EDGE_FALLING);
+ set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING);
+
+ /* Setup ISA IRQs */
+ for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) {
+ isa_irq = zeus_bit_to_irq(level);
+ set_irq_chip(isa_irq, &zeus_irq_chip);
+ set_irq_handler(isa_irq, handle_edge_irq);
+ set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
+ set_irq_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler);
+}
+
+
+/*
+ * Platform devices
+ */
+
+/* Flash */
+static struct resource zeus_mtd_resources[] = {
+ [0] = { /* NOR Flash (up to 64MB) */
+ .start = ZEUS_FLASH_PHYS,
+ .end = ZEUS_FLASH_PHYS + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* SRAM */
+ .start = ZEUS_SRAM_PHYS,
+ .end = ZEUS_SRAM_PHYS + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct physmap_flash_data zeus_flash_data[] = {
+ [0] = {
+ .width = 2,
+ .parts = NULL,
+ .nr_parts = 0,
+ },
+};
+
+static struct platform_device zeus_mtd_devices[] = {
+ [0] = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &zeus_flash_data[0],
+ },
+ .resource = &zeus_mtd_resources[0],
+ .num_resources = 1,
+ },
+};
+
+/* Serial */
+static struct resource zeus_serial_resources[] = {
+ {
+ .start = 0x10000000,
+ .end = 0x1000000f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x10800000,
+ .end = 0x1080000f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x11000000,
+ .end = 0x1100000f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40100000,
+ .end = 0x4010001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40200000,
+ .end = 0x4020001f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x40700000,
+ .end = 0x4070001f,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ /* External UARTs */
+ /* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
+ { /* COM1 */
+ .mapbase = 0x10000000,
+ .irq = gpio_to_irq(ZEUS_UARTA_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .uartclk = 14745600,
+ .regshift = 1,
+ .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { /* COM2 */
+ .mapbase = 0x10800000,
+ .irq = gpio_to_irq(ZEUS_UARTB_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .uartclk = 14745600,
+ .regshift = 1,
+ .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { /* COM3 */
+ .mapbase = 0x11000000,
+ .irq = gpio_to_irq(ZEUS_UARTC_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .uartclk = 14745600,
+ .regshift = 1,
+ .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { /* COM4 */
+ .mapbase = 0x11800000,
+ .irq = gpio_to_irq(ZEUS_UARTD_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
+ .uartclk = 14745600,
+ .regshift = 1,
+ .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ /* Internal UARTs */
+ { /* FFUART */
+ .membase = (void *)&FFUART,
+ .mapbase = __PREG(FFUART),
+ .irq = IRQ_FFUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { /* BTUART */
+ .membase = (void *)&BTUART,
+ .mapbase = __PREG(BTUART),
+ .irq = IRQ_BTUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { /* STUART */
+ .membase = (void *)&STUART,
+ .mapbase = __PREG(STUART),
+ .irq = IRQ_STUART,
+ .uartclk = 921600 * 16,
+ .regshift = 2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ },
+ { },
+};
+
+static struct platform_device zeus_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(zeus_serial_resources),
+ .resource = zeus_serial_resources,
+};
+
+/* Ethernet */
+static struct resource zeus_dm9k0_resource[] = {
+ [0] = {
+ .start = ZEUS_ETH0_PHYS,
+ .end = ZEUS_ETH0_PHYS + 1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = ZEUS_ETH0_PHYS + 2,
+ .end = ZEUS_ETH0_PHYS + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = gpio_to_irq(ZEUS_ETH0_GPIO),
+ .end = gpio_to_irq(ZEUS_ETH0_GPIO),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct resource zeus_dm9k1_resource[] = {
+ [0] = {
+ .start = ZEUS_ETH1_PHYS,
+ .end = ZEUS_ETH1_PHYS + 1,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = ZEUS_ETH1_PHYS + 2,
+ .end = ZEUS_ETH1_PHYS + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = gpio_to_irq(ZEUS_ETH1_GPIO),
+ .end = gpio_to_irq(ZEUS_ETH1_GPIO),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct dm9000_plat_data zeus_dm9k_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device zeus_dm9k0_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(zeus_dm9k0_resource),
+ .resource = zeus_dm9k0_resource,
+ .dev = {
+ .platform_data = &zeus_dm9k_platdata,
+ }
+};
+
+static struct platform_device zeus_dm9k1_device = {
+ .name = "dm9000",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(zeus_dm9k1_resource),
+ .resource = zeus_dm9k1_resource,
+ .dev = {
+ .platform_data = &zeus_dm9k_platdata,
+ }
+};
+
+/* External SRAM */
+static struct resource zeus_sram_resource = {
+ .start = ZEUS_SRAM_PHYS,
+ .end = ZEUS_SRAM_PHYS + ZEUS_SRAM_SIZE * 2 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device zeus_sram_device = {
+ .name = "pxa2xx-8bit-sram",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &zeus_sram_resource,
+};
+
+/* SPI interface on SSP3 */
+static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+static struct platform_device pxa2xx_spi_ssp3_device = {
+ .name = "pxa2xx-spi",
+ .id = 3,
+ .dev = {
+ .platform_data = &pxa2xx_spi_ssp3_master_info,
+ },
+};
+
+/* Leds */
+static struct gpio_led zeus_leds[] = {
+ [0] = {
+ .name = "zeus:yellow:1",
+ .default_trigger = "heartbeat",
+ .gpio = ZEUS_EXT0_GPIO(3),
+ .active_low = 1,
+ },
+ [1] = {
+ .name = "zeus:yellow:2",
+ .default_trigger = "default-on",
+ .gpio = ZEUS_EXT0_GPIO(4),
+ .active_low = 1,
+ },
+ [2] = {
+ .name = "zeus:yellow:3",
+ .default_trigger = "default-on",
+ .gpio = ZEUS_EXT0_GPIO(5),
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data zeus_leds_info = {
+ .leds = zeus_leds,
+ .num_leds = ARRAY_SIZE(zeus_leds),
+};
+
+static struct platform_device zeus_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &zeus_leds_info,
+ },
+};
+
+static void zeus_cf_reset(int state)
+{
+ u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL);
+
+ if (state)
+ cpld_state |= ZEUS_CPLD_CONTROL_CF_RST;
+ else
+ cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST;
+
+ __raw_writew(cpld_state, ZEUS_CPLD_CONTROL);
+}
+
+static struct arcom_pcmcia_pdata zeus_pcmcia_info = {
+ .cd_gpio = ZEUS_CF_CD_GPIO,
+ .rdy_gpio = ZEUS_CF_RDY_GPIO,
+ .pwr_gpio = ZEUS_CF_PWEN_GPIO,
+ .reset = zeus_cf_reset,
+};
+
+static struct platform_device zeus_pcmcia_device = {
+ .name = "zeus-pcmcia",
+ .id = -1,
+ .dev = {
+ .platform_data = &zeus_pcmcia_info,
+ },
+};
+
+static struct platform_device *zeus_devices[] __initdata = {
+ &zeus_serial_device,
+ &zeus_mtd_devices[0],
+ &zeus_dm9k0_device,
+ &zeus_dm9k1_device,
+ &zeus_sram_device,
+ &pxa2xx_spi_ssp3_device,
+ &zeus_leds_device,
+ &zeus_pcmcia_device,
+};
+
+/* AC'97 */
+static pxa2xx_audio_ops_t zeus_ac97_info = {
+ .reset_gpio = 95,
+};
+
+
+/*
+ * USB host
+ */
+
+static int zeus_ohci_init(struct device *dev)
+{
+ int err;
+
+ /* Switch on port 2. */
+ if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) {
+ dev_err(dev, "Can't request USB2_PWREN\n");
+ return err;
+ }
+
+ if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) {
+ gpio_free(ZEUS_USB2_PWREN_GPIO);
+ dev_err(dev, "Can't enable USB2_PWREN\n");
+ return err;
+ }
+
+ /* Port 2 is shared between host and client interface. */
+ UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+ return 0;
+}
+
+static void zeus_ohci_exit(struct device *dev)
+{
+ /* Power-off port 2 */
+ gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0);
+ gpio_free(ZEUS_USB2_PWREN_GPIO);
+}
+
+static struct pxaohci_platform_data zeus_ohci_platform_data = {
+ .port_mode = PMM_NPS_MODE,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .init = zeus_ohci_init,
+ .exit = zeus_ohci_exit,
+};
+
+/*
+ * Flat Panel
+ */
+
+static void zeus_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+ gpio_set_value(ZEUS_LCD_EN_GPIO, on);
+}
+
+static void zeus_backlight_power(int on)
+{
+ gpio_set_value(ZEUS_BKLEN_GPIO, on);
+}
+
+static int zeus_setup_fb_gpios(void)
+{
+ int err;
+
+ if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN")))
+ goto out_err;
+
+ if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0)))
+ goto out_err_lcd;
+
+ if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN")))
+ goto out_err_lcd;
+
+ if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0)))
+ goto out_err_bkl;
+
+ return 0;
+
+out_err_bkl:
+ gpio_free(ZEUS_BKLEN_GPIO);
+out_err_lcd:
+ gpio_free(ZEUS_LCD_EN_GPIO);
+out_err:
+ return err;
+}
+
+static struct pxafb_mode_info zeus_fb_mode_info[] = {
+ {
+ .pixclock = 39722,
+
+ .xres = 640,
+ .yres = 480,
+
+ .bpp = 16,
+
+ .hsync_len = 63,
+ .left_margin = 16,
+ .right_margin = 81,
+
+ .vsync_len = 2,
+ .upper_margin = 12,
+ .lower_margin = 31,
+
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info zeus_fb_info = {
+ .modes = zeus_fb_mode_info,
+ .num_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_lcd_power = zeus_lcd_power,
+ .pxafb_backlight_power = zeus_backlight_power,
+};
+
+/*
+ * MMC/SD Device
+ *
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+
+static struct pxamci_platform_data zeus_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .detect_delay = HZ/4,
+ .gpio_card_detect = ZEUS_MMC_CD_GPIO,
+ .gpio_card_ro = ZEUS_MMC_WP_GPIO,
+ .gpio_card_ro_invert = 1,
+ .gpio_power = -1
+};
+
+/*
+ * USB Device Controller
+ */
+static void zeus_udc_command(int cmd)
+{
+ switch (cmd) {
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ pr_info("zeus: disconnecting USB client\n");
+ UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+ break;
+
+ case PXA2XX_UDC_CMD_CONNECT:
+ pr_info("zeus: connecting USB client\n");
+ UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+ break;
+ }
+}
+
+static struct pxa2xx_udc_mach_info zeus_udc_info = {
+ .udc_command = zeus_udc_command,
+};
+
+static void zeus_power_off(void)
+{
+ local_irq_disable();
+ pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
+}
+
+int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
+ unsigned ngpio, void *context)
+{
+ int i;
+ u8 pcb_info = 0;
+
+ for (i = 0; i < 8; i++) {
+ int pcb_bit = gpio + i + 8;
+
+ if (gpio_request(pcb_bit, "pcb info")) {
+ dev_err(&client->dev, "Can't request pcb info %d\n", i);
+ continue;
+ }
+
+ if (gpio_direction_input(pcb_bit)) {
+ dev_err(&client->dev, "Can't read pcb info %d\n", i);
+ gpio_free(pcb_bit);
+ continue;
+ }
+
+ pcb_info |= !!gpio_get_value(pcb_bit) << i;
+
+ gpio_free(pcb_bit);
+ }
+
+ dev_info(&client->dev, "Zeus PCB version %d issue %d\n",
+ pcb_info >> 4, pcb_info & 0xf);
+
+ return 0;
+}
+
+static struct pca953x_platform_data zeus_pca953x_pdata[] = {
+ [0] = { .gpio_base = ZEUS_EXT0_GPIO_BASE, },
+ [1] = {
+ .gpio_base = ZEUS_EXT1_GPIO_BASE,
+ .setup = zeus_get_pcb_info,
+ },
+ [2] = { .gpio_base = ZEUS_USER_GPIO_BASE, },
+};
+
+static struct i2c_board_info __initdata zeus_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pca9535", 0x21),
+ .platform_data = &zeus_pca953x_pdata[0],
+ },
+ {
+ I2C_BOARD_INFO("pca9535", 0x22),
+ .platform_data = &zeus_pca953x_pdata[1],
+ },
+ {
+ I2C_BOARD_INFO("pca9535", 0x20),
+ .platform_data = &zeus_pca953x_pdata[2],
+ .irq = gpio_to_irq(ZEUS_EXTGPIO_GPIO),
+ },
+ { I2C_BOARD_INFO("lm75a", 0x48) },
+ { I2C_BOARD_INFO("24c01", 0x50) },
+ { I2C_BOARD_INFO("isl1208", 0x6f) },
+};
+
+static mfp_cfg_t zeus_pin_config[] __initdata = {
+ GPIO15_nCS_1,
+ GPIO78_nCS_2,
+ GPIO80_nCS_4,
+ GPIO33_nCS_5,
+
+ GPIO22_GPIO,
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ GPIO119_USBH2_PWR,
+ GPIO120_USBH2_PEN,
+
+ GPIO86_LCD_LDD_16,
+ GPIO87_LCD_LDD_17,
+
+ GPIO102_GPIO,
+ GPIO104_CIF_DD_2,
+ GPIO105_CIF_DD_1,
+
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO79_PSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+ GPIO36_GPIO, /* CF CD */
+ GPIO97_GPIO, /* CF PWREN */
+ GPIO99_GPIO, /* CF RDY */
+};
+
+static void __init zeus_init(void)
+{
+ u16 dm9000_msc = 0xe279;
+
+ system_rev = __raw_readw(ZEUS_CPLD_VERSION);
+ pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
+
+ /* Fix timings for dm9000s (CS1/CS2)*/
+ MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16);
+ MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
+
+ pm_power_off = zeus_power_off;
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
+
+ platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
+
+ pxa_set_ohci_info(&zeus_ohci_platform_data);
+
+ if (zeus_setup_fb_gpios())
+ pr_err("Failed to setup fb gpios\n");
+ else
+ set_pxa_fb_info(&zeus_fb_info);
+
+ pxa_set_mci_info(&zeus_mci_platform_data);
+ pxa_set_udc_info(&zeus_udc_info);
+ pxa_set_ac97_info(&zeus_ac97_info);
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
+}
+
+static struct map_desc zeus_io_desc[] __initdata = {
+ {
+ .virtual = ZEUS_CPLD_VERSION,
+ .pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
+ .length = 0x1000,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = ZEUS_CPLD_ISA_IRQ,
+ .pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
+ .length = 0x1000,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = ZEUS_CPLD_CONTROL,
+ .pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
+ .length = 0x1000,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = ZEUS_CPLD_EXTWDOG,
+ .pfn = __phys_to_pfn(ZEUS_CPLD_EXTWDOG_PHYS),
+ .length = 0x1000,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = ZEUS_PC104IO,
+ .pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS),
+ .length = 0x00800000,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init zeus_map_io(void)
+{
+ pxa_map_io();
+
+ iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
+
+ /* Clear PSPR to ensure a full restart on wake-up. */
+ PMCR = PSPR = 0;
+
+ /* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
+ OSCC |= OSCC_OON;
+
+ /* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
+ * float chip selects and PCMCIA */
+ PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
+}
+
+MACHINE_START(ARCOM_ZEUS, "Arcom ZEUS")
+ /* Maintainer: Marc Zyngier <maz@misterjones.org> */
+ .phys_io = 0x40000000,
+ .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc),
+ .boot_params = 0xa0000100,
+ .map_io = zeus_map_io,
+ .init_irq = zeus_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = zeus_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index c48e1f2c334..ee5e392430e 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -70,7 +70,7 @@ config MACH_REALVIEW_PBX
bool "Support RealView/PBX platform"
select ARM_GIC
select HAVE_PATA_PLATFORM
- select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET
+ select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ZONE_DMA if SPARSEMEM
help
Include support for the ARM(R) RealView PBX platform.
diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h
index 585211ca018..7d74fd5c8d6 100644
--- a/arch/arm/mach-s3c24a0/include/mach/memory.h
+++ b/arch/arm/mach-s3c24a0/include/mach/memory.h
@@ -15,5 +15,7 @@
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
+#define __pfn_to_bus(x) __pfn_to_phys(x)
+#define __bus_to_pfn(x) __phys_to_pfn(x)
#endif
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 03a7f3857c5..b17d52f7cc4 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -4,6 +4,7 @@ menu "SA11x0 Implementations"
config SA1100_ASSABET
bool "Assabet"
+ select CPU_FREQ_SA1110
help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet).
@@ -19,6 +20,7 @@ config ASSABET_NEPONSET
config SA1100_CERF
bool "CerfBoard"
+ select CPU_FREQ_SA1110
help
The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
More information is available at:
@@ -45,6 +47,7 @@ endchoice
config SA1100_COLLIE
bool "Sharp Zaurus SL5500"
+ # FIXME: select CPU_FREQ_SA11x0
select SHARP_LOCOMO
select SHARP_SCOOP
select SHARP_PARAM
@@ -54,6 +57,7 @@ config SA1100_COLLIE
config SA1100_H3100
bool "Compaq iPAQ H3100"
select HTC_EGPIO
+ select CPU_FREQ_SA1100
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
@@ -64,6 +68,7 @@ config SA1100_H3100
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
select HTC_EGPIO
+ select CPU_FREQ_SA1100
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
@@ -74,6 +79,7 @@ config SA1100_H3600
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
select SA1111
+ select CPU_FREQ_SA1100
help
Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4.
@@ -81,6 +87,7 @@ config SA1100_BADGE4
config SA1100_JORNADA720
bool "HP Jornada 720"
select SA1111
+ # FIXME: select CPU_FREQ_SA11x0
help
Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See <http://www.hp.com/jornada/products/720>
@@ -98,12 +105,14 @@ config SA1100_JORNADA720_SSP
config SA1100_HACKKIT
bool "HackKit Core CPU Board"
+ select CPU_FREQ_SA1100
help
Say Y here to support the HackKit Core CPU Board
<http://hackkit.eletztrick.de>;
config SA1100_LART
bool "LART"
+ select CPU_FREQ_SA1100
help
Say Y here if you are using the Linux Advanced Radio Terminal
(also known as the LART). See <http://www.lartmaker.nl/> for
@@ -111,6 +120,7 @@ config SA1100_LART
config SA1100_PLEB
bool "PLEB"
+ select CPU_FREQ_SA1100
help
Say Y here if you are using version 1 of the Portable Linux
Embedded Board (also known as PLEB).
@@ -119,6 +129,7 @@ config SA1100_PLEB
config SA1100_SHANNON
bool "Shannon"
+ select CPU_FREQ_SA1100
help
The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
limited edition webphone produced by Philips. The Shannon is a SA1100
@@ -127,6 +138,7 @@ config SA1100_SHANNON
config SA1100_SIMPAD
bool "Simpad"
+ select CPU_FREQ_SA1110
help
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
@@ -145,3 +157,4 @@ config SA1100_SSP
endmenu
endif
+
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 9faea1511c1..3c1fcd69671 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -58,7 +58,6 @@ static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
2802 /* 280.2 MHz */
};
-#if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
/* rounds up(!) */
unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
{
@@ -110,17 +109,6 @@ unsigned int sa11x0_getspeed(unsigned int cpu)
return cclk_frequency_100khz[PPCR & 0xf] * 100;
}
-#else
-/*
- * We still need to provide this so building without cpufreq works.
- */
-unsigned int cpufreq_get(unsigned int cpu)
-{
- return cclk_frequency_100khz[PPCR & 0xf] * 100;
-}
-EXPORT_SYMBOL(cpufreq_get);
-#endif
-
/*
* This is the SA11x0 sched_clock implementation. This has
* a resolution of 271ns, and a maximum value of 32025597s (370 days).
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 2d7423af119..aed05bc3c2e 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -38,16 +38,72 @@ union vfp_state *last_VFP_context[NR_CPUS];
*/
unsigned int VFP_arch;
+/*
+ * Per-thread VFP initialization.
+ */
+static void vfp_thread_flush(struct thread_info *thread)
+{
+ union vfp_state *vfp = &thread->vfpstate;
+ unsigned int cpu;
+
+ memset(vfp, 0, sizeof(union vfp_state));
+
+ vfp->hard.fpexc = FPEXC_EN;
+ vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
+
+ /*
+ * Disable VFP to ensure we initialize it first. We must ensure
+ * that the modification of last_VFP_context[] and hardware disable
+ * are done for the same CPU and without preemption.
+ */
+ cpu = get_cpu();
+ if (last_VFP_context[cpu] == vfp)
+ last_VFP_context[cpu] = NULL;
+ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+ put_cpu();
+}
+
+static void vfp_thread_release(struct thread_info *thread)
+{
+ /* release case: Per-thread VFP cleanup. */
+ union vfp_state *vfp = &thread->vfpstate;
+ unsigned int cpu = thread->cpu;
+
+ if (last_VFP_context[cpu] == vfp)
+ last_VFP_context[cpu] = NULL;
+}
+
+/*
+ * When this function is called with the following 'cmd's, the following
+ * is true while this function is being run:
+ * THREAD_NOFTIFY_SWTICH:
+ * - the previously running thread will not be scheduled onto another CPU.
+ * - the next thread to be run (v) will not be running on another CPU.
+ * - thread->cpu is the local CPU number
+ * - not preemptible as we're called in the middle of a thread switch
+ * THREAD_NOTIFY_FLUSH:
+ * - the thread (v) will be running on the local CPU, so
+ * v === current_thread_info()
+ * - thread->cpu is the local CPU number at the time it is accessed,
+ * but may change at any time.
+ * - we could be preempted if tree preempt rcu is enabled, so
+ * it is unsafe to use thread->cpu.
+ * THREAD_NOTIFY_RELEASE:
+ * - the thread (v) will not be running on any CPU; it is a dead thread.
+ * - thread->cpu will be the last CPU the thread ran on, which may not
+ * be the current CPU.
+ * - we could be preempted if tree preempt rcu is enabled.
+ */
static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
{
struct thread_info *thread = v;
- union vfp_state *vfp;
- __u32 cpu = thread->cpu;
if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
u32 fpexc = fmrx(FPEXC);
#ifdef CONFIG_SMP
+ unsigned int cpu = thread->cpu;
+
/*
* On SMP, if VFP is enabled, save the old state in
* case the thread migrates to a different CPU. The
@@ -74,25 +130,10 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
return NOTIFY_DONE;
}
- vfp = &thread->vfpstate;
- if (cmd == THREAD_NOTIFY_FLUSH) {
- /*
- * Per-thread VFP initialisation.
- */
- memset(vfp, 0, sizeof(union vfp_state));
-
- vfp->hard.fpexc = FPEXC_EN;
- vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
-
- /*
- * Disable VFP to ensure we initialise it first.
- */
- fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
- }
-
- /* flush and release case: Per-thread VFP cleanup. */
- if (last_VFP_context[cpu] == vfp)
- last_VFP_context[cpu] = NULL;
+ if (cmd == THREAD_NOTIFY_FLUSH)
+ vfp_thread_flush(thread);
+ else
+ vfp_thread_release(thread);
return NOTIFY_DONE;
}
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index cd5082d3ca1..58bee55a3dd 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -208,7 +208,7 @@ config PCMCIA_PXA2XX
depends on ARM && ARCH_PXA && PCMCIA
depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
|| MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
- || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
+ || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2)
select PCMCIA_SOC_COMMON
help
Say Y here to include support for the PXA2xx PCMCIA controller
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 38293831399..83ff802de54 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -67,7 +67,7 @@ pxa2xx-obj-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock_cs.o
pxa2xx-obj-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o
pxa2xx-obj-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o
pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx_cs.o
-pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o
+pxa2xx-obj-$(CONFIG_ARCOM_PCMCIA) += pxa2xx_viper.o
pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o
pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 84dde7768ad..da346eb7e77 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -214,7 +214,8 @@ static void pxa2xx_configure_sockets(struct device *dev)
MECR |= MECR_CIT;
/* Set MECR:NOS (Number Of Sockets) */
- if ((ops->first + ops->nr) > 1 || machine_is_viper())
+ if ((ops->first + ops->nr) > 1 ||
+ machine_is_viper() || machine_is_arcom_zeus())
MECR |= MECR_NOS;
else
MECR &= ~MECR_NOS;
@@ -252,6 +253,7 @@ int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt)
return soc_pcmcia_add_one(skt);
}
+EXPORT_SYMBOL(pxa2xx_drv_pcmcia_add_one);
void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
{
@@ -261,19 +263,19 @@ void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
ops->frequency_change = pxa2xx_pcmcia_frequency_change;
#endif
}
+EXPORT_SYMBOL(pxa2xx_drv_pcmcia_ops);
-int __pxa2xx_drv_pcmcia_probe(struct device *dev)
+static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
{
int i, ret = 0;
struct pcmcia_low_level *ops;
struct skt_dev_info *sinfo;
struct soc_pcmcia_socket *skt;
- if (!dev || !dev->platform_data)
+ ops = (struct pcmcia_low_level *)dev->dev.platform_data;
+ if (!ops)
return -ENODEV;
- ops = (struct pcmcia_low_level *)dev->platform_data;
-
pxa2xx_drv_pcmcia_ops(ops);
sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
@@ -308,13 +310,6 @@ int __pxa2xx_drv_pcmcia_probe(struct device *dev)
return ret;
}
-EXPORT_SYMBOL(__pxa2xx_drv_pcmcia_probe);
-
-
-static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
-{
- return __pxa2xx_drv_pcmcia_probe(&dev->dev);
-}
static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev)
{
diff --git a/drivers/pcmcia/pxa2xx_base.h b/drivers/pcmcia/pxa2xx_base.h
index cb5efaec886..bb62ea87b8f 100644
--- a/drivers/pcmcia/pxa2xx_base.h
+++ b/drivers/pcmcia/pxa2xx_base.h
@@ -1,6 +1,3 @@
-/* temporary measure */
-extern int __pxa2xx_drv_pcmcia_probe(struct device *);
-
int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt);
void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops);
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
index 3a8993ed562..459a232d66b 100644
--- a/drivers/pcmcia/pxa2xx_palmtc.c
+++ b/drivers/pcmcia/pxa2xx_palmtc.c
@@ -67,7 +67,7 @@ static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
if (ret)
goto err7;
- skt->irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
+ skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
return 0;
err7:
diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c
index 490749ea677..d08802fe35f 100644
--- a/drivers/pcmcia/pxa2xx_stargate2.c
+++ b/drivers/pcmcia/pxa2xx_stargate2.c
@@ -40,7 +40,7 @@ static struct pcmcia_irqs irqs[] = {
static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->irq = IRQ_GPIO(SG2_S0_GPIO_READY);
+ skt->socket.pci_irq = IRQ_GPIO(SG2_S0_GPIO_READY);
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
}
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
index 27be2e154df..a51f2077644 100644
--- a/drivers/pcmcia/pxa2xx_viper.c
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -1,9 +1,8 @@
/*
- * VIPER PCMCIA support
+ * Viper/Zeus PCMCIA support
* Copyright 2004 Arcom Control Systems
*
* Maintained by Marc Zyngier <maz@misterjones.org>
- * <marc.zyngier@altran.com>
*
* Based on:
* iPAQ h2200 PCMCIA support
@@ -26,37 +25,47 @@
#include <asm/irq.h>
-#include <mach/viper.h>
-#include <asm/mach-types.h>
+#include <mach/arcom-pcmcia.h>
#include "soc_common.h"
#include "pxa2xx_base.h"
+static struct platform_device *arcom_pcmcia_dev;
+
static struct pcmcia_irqs irqs[] = {
- { 0, gpio_to_irq(VIPER_CF_CD_GPIO), "PCMCIA_CD" }
+ {
+ .sock = 0,
+ .str = "PCMCIA_CD",
+ },
};
+static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
+{
+ return arcom_pcmcia_dev->dev.platform_data;
+}
+
static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
+ struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
unsigned long flags;
- skt->socket.pci_irq = gpio_to_irq(VIPER_CF_RDY_GPIO);
+ skt->socket.pci_irq = gpio_to_irq(pdata->rdy_gpio);
+ irqs[0].irq = gpio_to_irq(pdata->cd_gpio);
- if (gpio_request(VIPER_CF_CD_GPIO, "CF detect"))
+ if (gpio_request(pdata->cd_gpio, "CF detect"))
goto err_request_cd;
- if (gpio_request(VIPER_CF_RDY_GPIO, "CF ready"))
+ if (gpio_request(pdata->rdy_gpio, "CF ready"))
goto err_request_rdy;
- if (gpio_request(VIPER_CF_POWER_GPIO, "CF power"))
+ if (gpio_request(pdata->pwr_gpio, "CF power"))
goto err_request_pwr;
local_irq_save(flags);
- /* GPIO 82 is the CF power enable line. initially off */
- if (gpio_direction_output(VIPER_CF_POWER_GPIO, 0) ||
- gpio_direction_input(VIPER_CF_CD_GPIO) ||
- gpio_direction_input(VIPER_CF_RDY_GPIO)) {
+ if (gpio_direction_output(pdata->pwr_gpio, 0) ||
+ gpio_direction_input(pdata->cd_gpio) ||
+ gpio_direction_input(pdata->rdy_gpio)) {
local_irq_restore(flags);
goto err_dir;
}
@@ -66,13 +75,13 @@ static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
err_dir:
- gpio_free(VIPER_CF_POWER_GPIO);
+ gpio_free(pdata->pwr_gpio);
err_request_pwr:
- gpio_free(VIPER_CF_RDY_GPIO);
+ gpio_free(pdata->rdy_gpio);
err_request_rdy:
- gpio_free(VIPER_CF_CD_GPIO);
+ gpio_free(pdata->cd_gpio);
err_request_cd:
- printk(KERN_ERR "viper: Failed to setup PCMCIA GPIOs\n");
+ dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
return -1;
}
@@ -81,17 +90,21 @@ err_request_cd:
*/
static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
+ struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
- gpio_free(VIPER_CF_POWER_GPIO);
- gpio_free(VIPER_CF_RDY_GPIO);
- gpio_free(VIPER_CF_CD_GPIO);
+ gpio_free(pdata->pwr_gpio);
+ gpio_free(pdata->rdy_gpio);
+ gpio_free(pdata->cd_gpio);
}
static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
- state->detect = gpio_get_value(VIPER_CF_CD_GPIO) ? 0 : 1;
- state->ready = gpio_get_value(VIPER_CF_RDY_GPIO) ? 1 : 0;
+ struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
+ state->detect = !gpio_get_value(pdata->cd_gpio);
+ state->ready = !!gpio_get_value(pdata->rdy_gpio);
state->bvd1 = 1;
state->bvd2 = 1;
state->wrprot = 0;
@@ -102,20 +115,21 @@ static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
+ struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
+
/* Silently ignore Vpp, output enable, speaker enable. */
- viper_cf_rst(state->flags & SS_RESET);
+ pdata->reset(state->flags & SS_RESET);
/* Apply socket voltage */
switch (state->Vcc) {
case 0:
- gpio_set_value(VIPER_CF_POWER_GPIO, 0);
+ gpio_set_value(pdata->pwr_gpio, 0);
break;
case 33:
- gpio_set_value(VIPER_CF_POWER_GPIO, 1);
+ gpio_set_value(pdata->pwr_gpio, 1);
break;
default:
- printk(KERN_ERR "%s: Unsupported Vcc:%d\n",
- __func__, state->Vcc);
+ dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc);
return -1;
}
@@ -130,7 +144,7 @@ static void viper_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
}
-static struct pcmcia_low_level viper_pcmcia_ops __initdata = {
+static struct pcmcia_low_level viper_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = viper_pcmcia_hw_init,
.hw_shutdown = viper_pcmcia_hw_shutdown,
@@ -143,17 +157,25 @@ static struct pcmcia_low_level viper_pcmcia_ops __initdata = {
static struct platform_device *viper_pcmcia_device;
-static int __init viper_pcmcia_init(void)
+static int viper_pcmcia_probe(struct platform_device *pdev)
{
int ret;
- if (!machine_is_viper())
- return -ENODEV;
+ /* I can't imagine more than one device, but you never know... */
+ if (arcom_pcmcia_dev)
+ return -EEXIST;
+
+ if (!pdev->dev.platform_data)
+ return -EINVAL;
viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!viper_pcmcia_device)
return -ENOMEM;
+ arcom_pcmcia_dev = pdev;
+
+ viper_pcmcia_device->dev.parent = &pdev->dev;
+
ret = platform_device_add_data(viper_pcmcia_device,
&viper_pcmcia_ops,
sizeof(viper_pcmcia_ops));
@@ -161,18 +183,49 @@ static int __init viper_pcmcia_init(void)
if (!ret)
ret = platform_device_add(viper_pcmcia_device);
- if (ret)
+ if (ret) {
platform_device_put(viper_pcmcia_device);
+ arcom_pcmcia_dev = NULL;
+ }
return ret;
}
-static void __exit viper_pcmcia_exit(void)
+static int viper_pcmcia_remove(struct platform_device *pdev)
{
platform_device_unregister(viper_pcmcia_device);
+ arcom_pcmcia_dev = NULL;
+ return 0;
+}
+
+static struct platform_device_id viper_pcmcia_id_table[] = {
+ { .name = "viper-pcmcia", },
+ { .name = "zeus-pcmcia", },
+ { },
+};
+
+static struct platform_driver viper_pcmcia_driver = {
+ .probe = viper_pcmcia_probe,
+ .remove = viper_pcmcia_remove,
+ .driver = {
+ .name = "arcom-pcmcia",
+ .owner = THIS_MODULE,
+ },
+ .id_table = viper_pcmcia_id_table,
+};
+
+static int __init viper_pcmcia_init(void)
+{
+ return platform_driver_register(&viper_pcmcia_driver);
+}
+
+static void __exit viper_pcmcia_exit(void)
+{
+ return platform_driver_unregister(&viper_pcmcia_driver);
}
module_init(viper_pcmcia_init);
module_exit(viper_pcmcia_exit);
+MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
MODULE_LICENSE("GPL");