diff options
| -rw-r--r-- | Documentation/devicetree/bindings/clock/maxim,max77686.txt | 38 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/max77686.txt | 3 | ||||
| -rw-r--r-- | drivers/clk/clk-max77686.c | 24 |
3 files changed, 65 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt new file mode 100644 index 00000000000..96ce71bbd74 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -0,0 +1,38 @@ +Binding for Maxim MAX77686 32k clock generator block + +This is a part of device tree bindings of MAX77686 multi-function device. +More information can be found in bindings/mfd/max77686.txt file. + +The MAX77686 contains three 32.768khz clock outputs that can be controlled +(gated/ungated) over I2C. + +Following properties should be presend in main device node of the MFD chip. + +Required properties: +- #clock-cells: simple one-cell clock specifier format is used, where the + only cell is used as an index of the clock inside the provider. Following + indices are allowed: + - 0: 32khz_ap clock, + - 1: 32khz_cp clock, + - 2: 32khz_pmic clock. + +Example: Node of the MFD chip + + max77686: max77686@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 0>; + reg = <0x09>; + #clock-cells = <1>; + + /* ... */ + }; + +Example: Clock consumer node + + foo@0 { + compatible = "bar,foo"; + /* ... */ + clock-names = "my-clock"; + clocks = <&max77686 2>; + }; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index c6a3469d343..678f3cf0b8f 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -7,6 +7,9 @@ different i2c slave address,presently for which we are statically creating i2c client while probing.This document describes the binding for mfd device and PMIC submodule. +Binding for the built-in 32k clock generator block is defined separately +in bindings/clk/maxim,max77686.txt file. + Required properties: - compatible : Must be "maxim,max77686"; - reg : Specifies the i2c slave address of PMIC block. diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c index 3cf38dc6637..3d7e8dd8fd5 100644 --- a/drivers/clk/clk-max77686.c +++ b/drivers/clk/clk-max77686.c @@ -169,6 +169,26 @@ static int max77686_clk_probe(struct platform_device *pdev) platform_set_drvdata(pdev, clocks); + if (iodev->dev->of_node) { + struct clk_onecell_data *of_data; + + of_data = devm_kzalloc(&pdev->dev, + sizeof(*of_data), GFP_KERNEL); + if (!of_data) { + ret = -ENOMEM; + goto err_clocks; + } + + of_data->clks = clocks; + of_data->clk_num = MAX77686_CLKS_NUM; + ret = of_clk_add_provider(iodev->dev->of_node, + of_clk_src_onecell_get, of_data); + if (ret) { + dev_err(&pdev->dev, "failed to register OF clock provider\n"); + goto err_clocks; + } + } + return 0; err_clocks: @@ -182,9 +202,13 @@ err_clocks: static int max77686_clk_remove(struct platform_device *pdev) { + struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct clk **clocks = platform_get_drvdata(pdev); int i; + if (iodev->dev->of_node) + of_clk_del_provider(iodev->dev->of_node); + for (i = 0; i < MAX77686_CLKS_NUM; i++) { struct clk_hw *hw = __clk_get_hw(clocks[i]); struct max77686_clk *max77686 = to_max77686_clk(hw); |