diff options
| -rw-r--r-- | Documentation/scsi/ChangeLog.megaraid | 61 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/mega_common.h | 3 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_mbox.c | 34 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_mbox.h | 4 |
4 files changed, 94 insertions, 8 deletions
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index c173806c91f..fd8939e0045 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -1,3 +1,64 @@ +Release Date : Fri May 19 09:31:45 EST 2006 - Seokmann Ju <sju@lsil.com> +Current Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module) +Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) + +1. Fixed a bug in megaraid_init_mbox(). + Customer reported "garbage in file on x86_64 platform". + Root Cause: the driver registered controllers as 64-bit DMA capable + for those which are not support it. + Fix: Made change in the function inserting identification machanism + identifying 64-bit DMA capable controllers. + + > -----Original Message----- + > From: Vasily Averin [mailto:vvs@sw.ru] + > Sent: Thursday, May 04, 2006 2:49 PM + > To: linux-scsi@vger.kernel.org; Kolli, Neela; Mukker, Atul; + > Ju, Seokmann; Bagalkote, Sreenivas; + > James.Bottomley@SteelEye.com; devel@openvz.org + > Subject: megaraid_mbox: garbage in file + > + > Hello all, + > + > I've investigated customers claim on the unstable work of + > their node and found a + > strange effect: reading from some files leads to the + > "attempt to access beyond end of device" messages. + > + > I've checked filesystem, memory on the node, motherboard BIOS + > version, but it + > does not help and issue still has been reproduced by simple + > file reading. + > + > Reproducer is simple: + > + > echo 0xffffffff >/proc/sys/dev/scsi/logging_level ; + > cat /vz/private/101/root/etc/ld.so.cache >/tmp/ttt ; + > echo 0 >/proc/sys/dev/scsi/logging + > + > It leads to the following messages in dmesg + > + > sd_init_command: disk=sda, block=871769260, count=26 + > sda : block=871769260 + > sda : reading 26/26 512 byte blocks. + > scsi_add_timer: scmd: f79ed980, time: 7500, (c02b1420) + > sd 0:1:0:0: send 0xf79ed980 sd 0:1:0:0: + > command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00 + > buffer = 0xf7cfb540, bufflen = 13312, done = 0xc0366b40, + > queuecommand 0xc0344010 + > leaving scsi_dispatch_cmnd() + > scsi_delete_timer: scmd: f79ed980, rtn: 1 + > sd 0:1:0:0: done 0xf79ed980 SUCCESS 0 sd 0:1:0:0: + > command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00 + > scsi host busy 1 failed 0 + > sd 0:1:0:0: Notifying upper driver of completion (result 0) + > sd_rw_intr: sda: res=0x0 + > 26 sectors total, 13312 bytes done. + > use_sg is 4 + > attempt to access beyond end of device + > sda6: rw=0, want=1044134458, limit=951401367 + > Buffer I/O error on device sda6, logical block 522067228 + > attempt to access beyond end of device + Release Date : Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju <sju@lsil.com> Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module) Older Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module) diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h index 4675343228a..12e38125b12 100644 --- a/drivers/scsi/megaraid/mega_common.h +++ b/drivers/scsi/megaraid/mega_common.h @@ -37,6 +37,9 @@ #define LSI_MAX_CHANNELS 16 #define LSI_MAX_LOGICAL_DRIVES_64LD (64+1) +#define HBA_SIGNATURE_64_BIT 0x299 +#define PCI_CONF_AMISIG64 0xa4 + /** * scb_t - scsi command control block diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 92715130ac0..e671af0b4f5 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_mbox.c - * Version : v2.20.4.8 (Apr 11 2006) + * Version : v2.20.4.9 (Jul 16 2006) * * Authors: * Atul Mukker <Atul.Mukker@lsil.com> @@ -720,6 +720,7 @@ megaraid_init_mbox(adapter_t *adapter) struct pci_dev *pdev; mraid_device_t *raid_dev; int i; + uint32_t magic64; adapter->ito = MBOX_TIMEOUT; @@ -863,12 +864,33 @@ megaraid_init_mbox(adapter_t *adapter) // Set the DMA mask to 64-bit. All supported controllers as capable of // DMA in this range - if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK) != 0) { - - con_log(CL_ANN, (KERN_WARNING - "megaraid: could not set DMA mask for 64-bit.\n")); + pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64); + + if (((magic64 == HBA_SIGNATURE_64_BIT) && + ((adapter->pdev->subsystem_device != + PCI_SUBSYS_ID_MEGARAID_SATA_150_6) || + (adapter->pdev->subsystem_device != + PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_VERDE) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_DOBSON) || + (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC && + adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) || + (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && + adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) || + (adapter->pdev->vendor == PCI_VENDOR_ID_DELL && + adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) { + if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK)) { + con_log(CL_ANN, (KERN_WARNING + "megaraid: DMA mask for 64-bit failed\n")); - goto out_free_sysfs_res; + if (pci_set_dma_mask (adapter->pdev, DMA_32BIT_MASK)) { + con_log(CL_ANN, (KERN_WARNING + "megaraid: 32-bit DMA mask failed\n")); + goto out_free_sysfs_res; + } + } } // setup tasklet for DPC diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h index 868fb0ec93e..2b5a3285f79 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.h +++ b/drivers/scsi/megaraid/megaraid_mbox.h @@ -21,8 +21,8 @@ #include "megaraid_ioctl.h" -#define MEGARAID_VERSION "2.20.4.8" -#define MEGARAID_EXT_VERSION "(Release Date: Mon Apr 11 12:27:22 EST 2006)" +#define MEGARAID_VERSION "2.20.4.9" +#define MEGARAID_EXT_VERSION "(Release Date: Sun Jul 16 12:27:22 EST 2006)" /* |