aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/omap/dsp.txt14
-rw-r--r--Documentation/devicetree/bindings/arm/omap/iva.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/omap/l3-noc.txt19
-rw-r--r--Documentation/devicetree/bindings/arm/omap/mpu.txt27
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt43
-rw-r--r--arch/arm/boot/dts/omap3-beagle.dts29
-rw-r--r--arch/arm/boot/dts/omap3.dtsi63
-rw-r--r--arch/arm/boot/dts/omap4-panda.dts29
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts29
-rw-r--r--arch/arm/boot/dts/omap4.dtsi103
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c16
-rw-r--r--arch/arm/mach-omap1/board-fsample.c76
-rw-r--r--arch/arm/mach-omap1/board-generic.c16
-rw-r--r--arch/arm/mach-omap1/board-h2.c16
-rw-r--r--arch/arm/mach-omap1/board-h3.c16
-rw-r--r--arch/arm/mach-omap1/board-htcherald.c12
-rw-r--r--arch/arm/mach-omap1/board-innovator.c36
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c34
-rw-r--r--arch/arm/mach-omap1/board-osk.c16
-rw-r--r--arch/arm/mach-omap1/board-palmte.c16
-rw-r--r--arch/arm/mach-omap1/board-palmtt.c16
-rw-r--r--arch/arm/mach-omap1/board-palmz71.c18
-rw-r--r--arch/arm/mach-omap1/board-perseus2.c75
-rw-r--r--arch/arm/mach-omap1/board-sx1.c17
-rw-r--r--arch/arm/mach-omap1/board-voiceblue.c16
-rw-r--r--arch/arm/mach-omap1/devices.c3
-rw-r--r--arch/arm/mach-omap1/io.c59
-rw-r--r--arch/arm/mach-omap2/Kconfig8
-rw-r--r--arch/arm/mach-omap2/board-generic.c159
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c11
-rw-r--r--arch/arm/mach-omap2/board-ti8168evm.c1
-rw-r--r--arch/arm/mach-omap2/common.c50
-rw-r--r--arch/arm/mach-omap2/control.c14
-rw-r--r--arch/arm/mach-omap2/devices.c51
-rw-r--r--arch/arm/mach-omap2/display.c11
-rw-r--r--arch/arm/mach-omap2/dma.c11
-rw-r--r--arch/arm/mach-omap2/gpio.c12
-rw-r--r--arch/arm/mach-omap2/hsmmc.c18
-rw-r--r--arch/arm/mach-omap2/hwspinlock.c12
-rw-r--r--arch/arm/mach-omap2/io.c129
-rw-r--r--arch/arm/mach-omap2/io.h7
-rw-r--r--arch/arm/mach-omap2/mcbsp.c11
-rw-r--r--arch/arm/mach-omap2/omap-smp.c7
-rw-r--r--arch/arm/mach-omap2/omap_l3_noc.c147
-rw-r--r--arch/arm/mach-omap2/omap_l3_noc.h224
-rw-r--r--arch/arm/mach-omap2/omap_l3_smx.c91
-rw-r--r--arch/arm/mach-omap2/omap_l3_smx.h164
-rw-r--r--arch/arm/mach-omap2/pm.c72
-rw-r--r--arch/arm/mach-omap2/prcm.c19
-rw-r--r--arch/arm/mach-omap2/sdrc.c13
-rw-r--r--arch/arm/mach-omap2/serial.c25
-rw-r--r--arch/arm/mach-omap2/sr_device.c11
-rw-r--r--arch/arm/mach-omap2/timer.c6
-rw-r--r--arch/arm/mach-omap2/usb-musb.c26
-rw-r--r--arch/arm/plat-omap/i2c.c10
-rw-r--r--arch/arm/plat-omap/include/plat/common.h17
-rw-r--r--arch/arm/plat-omap/include/plat/io.h33
-rw-r--r--arch/arm/plat-omap/include/plat/omap_device.h1
-rw-r--r--arch/arm/plat-omap/io.c10
-rw-r--r--arch/arm/plat-omap/omap_device.c313
-rw-r--r--arch/arm/plat-omap/sram.c85
-rw-r--r--drivers/of/base.c84
-rw-r--r--include/linux/of.h18
63 files changed, 1596 insertions, 1118 deletions
diff --git a/Documentation/devicetree/bindings/arm/omap/dsp.txt b/Documentation/devicetree/bindings/arm/omap/dsp.txt
new file mode 100644
index 00000000000..d3830a32ce0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/dsp.txt
@@ -0,0 +1,14 @@
+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+ compatible = "ti,omap3-c64";
+ ti,hwmods = "dsp";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/iva.txt b/Documentation/devicetree/bindings/arm/omap/iva.txt
new file mode 100644
index 00000000000..6d629517135
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/iva.txt
@@ -0,0 +1,19 @@
+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+ - "ti,ivahd" for OMAP4
+ - "ti,iva2.2" for OMAP3
+ - "ti,iva2.1" for OMAP2430
+ - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+ compatible = "ti,ivahd", "ti,iva";
+ ti,hwmods = "iva";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
new file mode 100644
index 00000000000..6888a5efc86
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -0,0 +1,19 @@
+* TI - L3 Network On Chip (NoC)
+
+This version is an implementation of the generic NoC IP
+provided by Arteris.
+
+Required properties:
+- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
+ Should be "ti,omap4-l3-noc" for OMAP4 family
+- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
+
+Examples:
+
+ocp {
+ compatible = "ti,omap4-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
new file mode 100644
index 00000000000..1a5a42ce21b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -0,0 +1,27 @@
+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+ Should be "ti,omap4-mpu" for OMAP4
+- ti,hwmods: "mpu"
+
+Examples:
+
+- For an OMAP4 SMP system:
+
+mpu {
+ compatible = "ti,omap4-mpu";
+ ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
new file mode 100644
index 00000000000..dbdab40ed3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -0,0 +1,43 @@
+* Texas Instruments OMAP
+
+OMAP is currently using a static file per SoC family to describe the
+IPs present in the SoC.
+On top of that an omap_device is created to extend the platform_device
+capabilities and to allow binding with one or several hwmods.
+The hwmods will contain all the information to build the device:
+adresse range, irq lines, dma lines, interconnect, PRCM register,
+clock domain, input clocks.
+For the moment just point to the existing hwmod, the next step will be
+to move data from hwmod to device-tree representation.
+
+
+Required properties:
+- compatible: Every devices present in OMAP SoC should be in the
+ form: "ti,XXX"
+- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP
+ HW documentation, attached to a device. Must contain at least
+ one hwmod.
+
+Optional properties:
+- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
+ during suspend.
+
+
+Example:
+
+spinlock@1 {
+ compatible = "ti,omap4-spinlock";
+ ti,hwmods = "spinlock";
+};
+
+
+Boards:
+
+- OMAP3 BeagleBoard : Low cost community board
+ compatible = "ti,omap3-beagle", "ti,omap3"
+
+- OMAP4 SDP : Software Developement Board
+ compatible = "ti,omap4-sdp", "ti,omap4430"
+
+- OMAP4 PandaBoard : Low cost community board
+ compatible = "ti,omap4-panda", "ti,omap4430"
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
new file mode 100644
index 00000000000..9486be62bcd
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TI OMAP3 BeagleBoard";
+ compatible = "ti,omap3-beagle", "ti,omap3";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
new file mode 100644
index 00000000000..d202bb5ec7e
--- /dev/null
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap3430", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+
+ iva {
+ compatible = "ti,iva2.2";
+ ti,hwmods = "iva";
+
+ dsp {
+ compatible = "ti,omap3-c64";
+ };
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP3 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,omap3-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
new file mode 100644
index 00000000000..c7026578ce7
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "TI OMAP4 PandaBoard";
+ compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
new file mode 100644
index 00000000000..066e28c9032
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "TI OMAP4 SDP board";
+ compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
new file mode 100644
index 00000000000..4c61c829043
--- /dev/null
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap4430", "ti,omap4";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap4-mpu";
+ ti,hwmods = "mpu";
+ };
+
+ dsp {
+ compatible = "ti,omap3-c64";
+ ti,hwmods = "dsp";
+ };
+
+ iva {
+ compatible = "ti,ivahd";
+ ti,hwmods = "iva";
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP4 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ *
+ * MPU -+-- MPU_PRIVATE - GIC, L2
+ * |
+ * +----------------+----------+
+ * | | |
+ * + +- EMIF - DDR |
+ * | | |
+ * | + +--------+
+ * | | |
+ * | +- L4_ABE - AESS, MCBSP, TIMERs...
+ * | |
+ * +- L3_MAIN --+- L4_CORE - IPs...
+ * |
+ * +- L4_PER - IPs...
+ * |
+ * +- L4_CFG -+- L4_WKUP - IPs...
+ * | |
+ * | +- IPs...
+ * +- IPU ----+
+ * | |
+ * +- DSP ----+
+ * | |
+ * +- DSS ----+
+ *
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "ti,omap4-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ };
+ };
+};
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 4ea60e2038e..1f1db76d704 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -134,12 +134,6 @@ void ams_delta_latch2_write(u16 mask, u16 value)
*(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg;
}
-static void __init ams_delta_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct map_desc ams_delta_io_desc[] __initdata = {
/* AMS_DELTA_LATCH1 */
{
@@ -378,17 +372,13 @@ static int __init ams_delta_modem_init(void)
}
arch_initcall(ams_delta_modem_init);
-static void __init ams_delta_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
.atag_offset = 0x100,
- .map_io = ams_delta_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = ams_delta_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 31e089b6f03..23178275f96 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -296,6 +296,39 @@ static struct omap_board_config_kernel fsample_config[] __initdata = {
static void __init omap_fsample_init(void)
{
+ /* Early, board-dependent init */
+
+ /*
+ * Hold GSM Reset until needed
+ */
+ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
+
+ /*
+ * UARTs -> done automagically by 8250 driver
+ */
+
+ /*
+ * CSx timings, GPIO Mux ... setup
+ */
+
+ /* Flash: CS0 timings setup */
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+ omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
+
+ /*
+ * Ethernet support through the debug board
+ * CS1 timings setup
+ */
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+ omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
+
+ /*
+ * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+ * It is used as the Ethernet controller interrupt
+ */
+ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+ OMAP7XX_IO_CONF_9);
+
fsample_init_smc91x();
if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
@@ -325,12 +358,6 @@ static void __init omap_fsample_init(void)
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_fsample_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_fsample_io_desc[] __initdata = {
{
@@ -349,49 +376,18 @@ static struct map_desc omap_fsample_io_desc[] __initdata = {
static void __init omap_fsample_map_io(void)
{
- omap1_map_common_io();
+ omap15xx_map_io();
iotable_init(omap_fsample_io_desc,
ARRAY_SIZE(omap_fsample_io_desc));
-
- /* Early, board-dependent init */
-
- /*
- * Hold GSM Reset until needed
- */
- omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
- /*
- * UARTs -> done automagically by 8250 driver
- */
-
- /*
- * CSx timings, GPIO Mux ... setup
- */
-
- /* Flash: CS0 timings setup */
- omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
- omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
- /*
- * Ethernet support through the debug board
- * CS1 timings setup
- */
- omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
- omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
- /*
- * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
- * It is used as the Ethernet controller interrupt
- */
- omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
}
MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
/* Maintainer: Brian Swetland <swetland@google.com> */
.atag_offset = 0x100,
.map_io = omap_fsample_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_fsample_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 05c6e9d858f..dc5b75de531 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -27,12 +27,6 @@
#include <plat/board.h>
#include <plat/common.h>
-static void __init omap_generic_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
/* assume no Mini-AB port */
#ifdef CONFIG_ARCH_OMAP15XX
@@ -86,17 +80,13 @@ static void __init omap_generic_init(void)
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_generic_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
/* Maintainer: Tony Lindgren <tony@atomide.com> */
.atag_offset = 0x100,
- .map_io = omap_generic_map_io,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_generic_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index c2e279173d4..b334b148167 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -372,12 +372,6 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = {
},
};
-static void __init h2_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct omap_usb_config h2_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
@@ -453,17 +447,13 @@ static void __init h2_init(void)
h2_mmc_init();
}
-static void __init h2_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_H2, "TI-H2")
/* Maintainer: Imre Deak <imre.deak@nokia.com> */
.atag_offset = 0x100,
- .map_io = h2_map_io,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = h2_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = h2_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 8f5b6af7ed5..74ebe72c984 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -435,23 +435,13 @@ static void __init h3_init(void)
h3_mmc_init();
}
-static void __init h3_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
-static void __init h3_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
/* Maintainer: Texas Instruments, Inc. */
.atag_offset = 0x100,
- .map_io = h3_map_io,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = h3_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = h3_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index fcd1a3c3189..3e91baab1a8 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -499,7 +499,7 @@ static void __init htcherald_lcd_init(void)
static void __init htcherald_map_io(void)
{
- omap1_map_common_io();
+ omap7xx_map_io();
/*
* The LCD panel must be disabled and DMA turned off here, as doing
@@ -600,20 +600,14 @@ static void __init htcherald_init(void)
#endif
}
-static void __init htcherald_init_irq(void)
-{
- printk(KERN_INFO "htcherald_init_irq.\n");
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
MACHINE_START(HERALD, "HTC Herald")
/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
/* Maintainer: wing-linux.sourceforge.net */
.atag_offset = 0x100,
.map_io = htcherald_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = htcherald_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = htcherald_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index c2234caf8a7..273153dba15 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -288,12 +288,6 @@ static void __init innovator_init_smc91x(void)
}
}
-static void __init innovator_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
#ifdef CONFIG_ARCH_OMAP15XX
static struct omap_usb_config innovator1510_usb_config __initdata = {
/* for bundled non-standard host and peripheral cables */
@@ -438,30 +432,32 @@ static void __init innovator_init(void)
innovator_mmc_init();
}
+/*
+ * REVISIT: Assume 15xx for now, we don't want to do revision check
+ * until later on. The right way to fix this is to set up a different
+ * machine_id for 16xx Innovator, or use device tree.
+ */
static void __init innovator_map_io(void)
{
- omap1_map_common_io();
+ omap15xx_map_io();
-#ifdef CONFIG_ARCH_OMAP15XX
- if (cpu_is_omap1510()) {
- iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
- udelay(10); /* Delay needed for FPGA */
-
- /* Dump the Innovator FPGA rev early - useful info for support. */
- printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
- fpga_read(OMAP1510_FPGA_REV_HIGH),
- fpga_read(OMAP1510_FPGA_REV_LOW),
- fpga_read(OMAP1510_FPGA_BOARD_REV));
- }
-#endif
+ iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
+ udelay(10); /* Delay needed for FPGA */
+
+ /* Dump the Innovator FPGA rev early - useful info for support. */
+ pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
+ fpga_read(OMAP1510_FPGA_REV_HIGH),
+ fpga_read(OMAP1510_FPGA_REV_LOW),
+ fpga_read(OMAP1510_FPGA_BOARD_REV));
}
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
/* Maintainer: MontaVista Software, Inc. */
.atag_offset = 0x100,
.map_io = innovator_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = innovator_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = innovator_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 02789c5d370..6798b848831 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -38,21 +38,6 @@
#define ADS7846_PENDOWN_GPIO 15
-static void __init omap_nokia770_init_irq(void)
-{
- /* On Nokia 770, the SleepX signal is masked with an
- * MPUIO line by default. It has to be unmasked for it
- * to become functional */
-
- /* SleepX mask direction */
- omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
- /* Unmask SleepX signal */
- omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
-
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static const unsigned int nokia770_keymap[] = {
KEY(1, 0, GROUP_0 | KEY_UP),
KEY(2, 0, GROUP_1 | KEY_F5),
@@ -245,6 +230,15 @@ static inline void nokia770_mmc_init(void)
static void __init omap_nokia770_init(void)
{
+ /* On Nokia 770, the SleepX signal is masked with an
+ * MPUIO line by default. It has to be unmasked for it
+ * to become functional */
+
+ /* SleepX mask direction */
+ omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
+ /* Unmask SleepX signal */
+ omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
+
platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
spi_register_board_info(nokia770_spi_board_info,
ARRAY_SIZE(nokia770_spi_board_info));
@@ -257,16 +251,12 @@ static void __init omap_nokia770_init(void)
nokia770_mmc_init();
}
-static void __init omap_nokia770_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(NOKIA770, "Nokia 770")
.atag_offset = 0x100,
- .map_io = omap_nokia770_map_io,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_nokia770_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e4dca1deebb..c3859278d25 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -278,12 +278,6 @@ static void __init osk_init_cf(void)
irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
}
-static void __init osk_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct omap_usb_config osk_usb_config __initdata = {
/* has usb host connector (A) ... for development it can also
* be used, with a NONSTANDARD gender-bending cable/dongle, as
@@ -575,17 +569,13 @@ static void __init osk_init(void)
osk_mistral_init();
}
-static void __init osk_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_OSK, "TI-OSK")
/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
.atag_offset = 0x100,
- .map_io = osk_map_io,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = osk_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = osk_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 50c4e398bcc..f9c44cb15b4 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -58,12 +58,6 @@
#define PALMTE_MMC2_GPIO OMAP_MPUIO(7)
#define PALMTE_MMC3_GPIO OMAP_MPUIO(11)
-static void __init omap_palmte_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static const unsigned int palmte_keymap[] = {
KEY(0, 0, KEY_F1), /* Calendar */
KEY(1, 0, KEY_F2), /* Contacts */
@@ -268,16 +262,12 @@ static void __init omap_palmte_init(void)
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_palmte_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
.atag_offset = 0x100,
- .map_io = omap_palmte_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_palmte_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 273771cb1b6..11a98539f7b 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -263,12 +263,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
}
};
-static void __init omap_palmtt_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct omap_usb_config palmtt_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0,
@@ -315,16 +309,12 @@ static void __init omap_palmtt_init(void)
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_palmtt_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
.atag_offset = 0x100,
- .map_io = omap_palmtt_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_palmtt_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index de36ade38ef..c6fe61dfe85 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -57,13 +57,6 @@
#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3)
#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4)
-static void __init
-omap_palmz71_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static const unsigned int palmz71_keymap[] = {
KEY(0, 0, KEY_F1),
KEY(1, 0, KEY_F2),
@@ -334,17 +327,12 @@ omap_palmz71_init(void)
palmz71_gpio_setup(0);
}
-static void __init
-omap_palmz71_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
.atag_offset = 0x100,
- .map_io = omap_palmz71_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_palmz71_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 04b1befaced..203ae07550d 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -264,6 +264,39 @@ static void __init perseus2_init_smc91x(void)
static void __init omap_perseus2_init(void)
{
+ /* Early, board-dependent init */
+
+ /*
+ * Hold GSM Reset until needed
+ */
+ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
+
+ /*
+ * UARTs -> done automagically by 8250 driver
+ */
+
+ /*
+ * CSx timings, GPIO Mux ... setup
+ */
+
+ /* Flash: CS0 timings setup */
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+ omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
+
+ /*
+ * Ethernet support through the debug board
+ * CS1 timings setup
+ */
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+ omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
+
+ /*
+ * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+ * It is used as the Ethernet controller interrupt
+ */
+ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+ OMAP7XX_IO_CONF_9);
+
perseus2_init_smc91x();
if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
@@ -293,11 +326,6 @@ static void __init omap_perseus2_init(void)
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_perseus2_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {
{
@@ -310,49 +338,18 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = {
static void __init omap_perseus2_map_io(void)
{
- omap1_map_common_io();
+ omap7xx_map_io();
iotable_init(omap_perseus2_io_desc,
ARRAY_SIZE(omap_perseus2_io_desc));
-
- /* Early, board-dependent init */
-
- /*
- * Hold GSM Reset until needed
- */
- omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
- /*
- * UARTs -> done automagically by 8250 driver
- */
-
- /*
- * CSx timings, GPIO Mux ... setup
- */
-
- /* Flash: CS0 timings setup */
- omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
- omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
- /*
- * Ethernet support through the debug board
- * CS1 timings setup
- */
- omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
- omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
- /*
- * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
- * It is used as the Ethernet controller interrupt
- */
- omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
}
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
/* Maintainer: Kevin Hilman <kjh@hilman.org> */
.atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_perseus2_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 2bea941741d..667a7cbdb11 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -406,24 +406,13 @@ static void __init omap_sx1_init(void)
gpio_direction_output(11, 0); /*A_SWITCH = 0 */
gpio_direction_output(15, 0); /*A_USB_ON = 0 */
}
-/*----------------------------------------*/
-static void __init omap_sx1_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-/*----------------------------------------*/
-
-static void __init omap_sx1_map_io(void)
-{
- omap1_map_common_io();
-}
MACHINE_START(SX1, "OMAP310 based Siemens SX1")
.atag_offset = 0x100,
- .map_io = omap_sx1_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_sx1_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 940faed82be..2a6545ba61c 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -159,17 +159,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
static struct omap_board_config_kernel voiceblue_config[] = {
};
-static void __init voiceblue_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
-static void __init voiceblue_map_io(void)
-{
- omap1_map_common_io();
-}
-
#define MACHINE_PANICED 1
#define MACHINE_REBOOTING 2
#define MACHINE_REBOOT 4
@@ -302,9 +291,10 @@ static void __init voiceblue_init(void)
MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
/* Maintainer: Ladislav Michl <michl@2n.cz> */
.atag_offset = 0x100,
- .map_io = voiceblue_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = voiceblue_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 7c50ecf6812..48ef9888e82 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -22,6 +22,7 @@
#include <mach/hardware.h>
#include <asm/mach/map.h>
+#include <plat/common.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
@@ -291,6 +292,8 @@ static int __init omap1_init_devices(void)
if (!cpu_class_is_omap1())
return -ENODEV;
+ omap_sram_init();
+
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 1cfa1b6bb62..7969cfda445 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -21,7 +21,6 @@
#include "clock.h"
extern void omap_check_revision(void);
-extern void omap_sram_init(void);
/*
* The machine specific code may provide the extra mapping besides the
@@ -85,51 +84,45 @@ static struct map_desc omap16xx_io_desc[] __initdata = {
#endif
/*
- * Maps common IO regions for omap1. This should only get called from
- * board specific init.
+ * Maps common IO regions for omap1
*/
-void __init omap1_map_common_io(void)
+static void __init omap1_map_common_io(void)
{
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-
- /* Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but we must also do it here because of the CPU
- * revision check below.
- */
- local_flush_tlb_all();
- flush_cache_all();
-
- /* We want to check CPU revision early for cpu_is_omapxxxx() macros.
- * IO space mapping must be initialized before we can do that.
- */
- omap_check_revision();
+}
#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
- if (cpu_is_omap7xx()) {
- iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
- }
+void __init omap7xx_map_io(void)
+{
+ omap1_map_common_io();
+ iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
+}
#endif
+
#ifdef CONFIG_ARCH_OMAP15XX
- if (cpu_is_omap15xx()) {
- iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
- if (cpu_is_omap16xx()) {
- iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
- }
+void __init omap15xx_map_io(void)
+{
+ omap1_map_common_io();
+ iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
+}
#endif
- omap_sram_init();
- omap_init_consistent_dma_size();
+#if defined(CONFIG_ARCH_OMAP16XX)
+void __init omap16xx_map_io(void)
+{
+ omap1_map_common_io();
+ iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
}
+#endif
/*
- * Common low-level hardware init for omap1. This should only get called from
- * board specific init.
+ * Common low-level hardware init for omap1.
*/
-void __init omap1_init_common_hw(void)
+void omap1_init_early(void)
{
+ omap_check_revision();
+ omap_ioremap_init();
+
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
*/
@@ -139,8 +132,8 @@ void __init omap1_init_common_hw(void)
/* Must init clocks early to assure that timer interrupt works
*/
omap1_clk_init();
-
omap1_mux_init();
+ omap_init_consistent_dma_size();
}
/*
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 89bfb49389f..497e9dc2795 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -108,9 +108,13 @@ comment "OMAP Board Type"
depends on ARCH_OMAP2PLUS
config MACH_OMAP_GENERIC
- bool "Generic OMAP board"
- depends on ARCH_OMAP2
+ bool "Generic OMAP2+ board"
+ depends on ARCH_OMAP2PLUS
+ select USE_OF
default y
+ help
+ Support for generic TI OMAP2+ boards using Flattened Device Tree.
+ More information at Documentation/devicetree
config MACH_OMAP2_TUSB6010
bool
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 7ac546219e5..0c427976d62 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -1,75 +1,158 @@
/*
- * linux/arch/arm/mach-omap2/board-generic.c
- *
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
- * Modified from mach-omap/omap1/board-generic.c
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
- * Code for generic OMAP2 board. Should work on many OMAP2 systems where
- * the bootloader passes the board-specific data to the kernel.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
+ * Modified from the original mach-omap/omap2/board-generic.c did by Paul
+ * to support the OMAP2+ device tree boards with an unique board file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
+
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
+#include <linux/i2c/twl.h>
#include <mach/hardware.h>
-#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
+#include <mach/omap4-common.h>
+#include "common-board-devices.h"
-static struct omap_board_config_kernel generic_config[] = {
+/*
+ * XXX: Still needed to boot until the i2c & twl driver is adapted to
+ * device-tree
+ */
+static struct twl4030_platform_data sdp4430_twldata = {
+ .irq_base = TWL6030_IRQ_BASE,
+ .irq_end = TWL6030_IRQ_END,
};
-static void __init omap_generic_init_early(void)
+static void __init omap4_i2c_init(void)
{
- omap2_init_common_infrastructure();
+ omap4_pmic_init("twl6030", &sdp4430_twldata);
}
+static struct twl4030_platform_data beagle_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static void __init omap3_i2c_init(void)
+{
+ omap3_pmic_init("twl4030", &beagle_twldata);
+}
+
+static struct of_device_id omap_dt_match_table[] __initdata = {
+ { .compatible = "simple-bus", },
+ { .compatible = "ti,omap-infra", },
+ { }
+};
+
+static struct of_device_id intc_match[] __initdata = {
+ { .compatible = "ti,omap3-intc", },
+ { .compatible = "arm,cortex-a9-gic", },
+ { }
+};
+
static void __init omap_generic_init(void)
{
+ struct device_node *node = of_find_matching_node(NULL, intc_match);
+ if (node)
+ irq_domain_add_simple(node, 0);
+
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap_board_config = generic_config;
- omap_board_config_size = ARRAY_SIZE(generic_config);
+
+ of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
+}
+
+static void __init omap4_init(void)
+{
+ omap4_i2c_init();
+ omap_generic_init();
}
-static void __init omap_generic_map_io(void)
+static void __init omap3_init(void)
{
- if (cpu_is_omap242x()) {
- omap2_set_globals_242x();
- omap242x_map_common_io();
- } else if (cpu_is_omap243x()) {
- omap2_set_globals_243x();
- omap243x_map_common_io();
- } else if (cpu_is_omap34xx()) {
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
- } else if (cpu_is_omap44xx()) {
- omap2_set_globals_443x();
- omap44xx_map_common_io();
- }
+ omap3_i2c_init();
+ omap_generic_init();
}
-/* XXX This machine entry name should be updated */
-MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
- /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+#if defined(CONFIG_SOC_OMAP2420)
+static const char *omap242x_boards_compat[] __initdata = {
+ "ti,omap2420",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_generic_map_io,
- .init_early = omap_generic_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
+ .dt_compat = omap242x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_SOC_OMAP2430)
+static const char *omap243x_boards_compat[] __initdata = {
+ "ti,omap2430",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap243x_map_io,
+ .init_early = omap2430_init_early,
+ .init_irq = omap2_init_irq,
+ .init_machine = omap_generic_init,
+ .timer = &omap2_timer,
+ .dt_compat = omap243x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+static const char *omap3_boards_compat[] __initdata = {
+ "ti,omap3",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
+ .init_irq = omap3_init_irq,
+ .init_machine = omap3_init,
+ .timer = &omap3_timer,
+ .dt_compat = omap3_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static const char *omap4_boards_compat[] __initdata = {
+ "ti,omap4",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
+ .init_irq = gic_init_irq,
+ .init_machine = omap4_init,
+ .timer = &omap4_timer,
+ .dt_compat = omap4_boards_compat,
MACHINE_END
+#endif
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 474a7e2cb63..70261bcda3f 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -444,11 +444,6 @@ static struct platform_device keys_gpio = {
},
};
-static void __init omap3_beagle_init_early(void)
-{
- omap2_init_common_infrastructure();
-}
-
static struct platform_device *omap3_beagle_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
@@ -486,8 +481,8 @@ static void __init beagle_opp_init(void)
if (cpu_is_omap3630()) {
struct device *mpu_dev, *iva_dev;
- mpu_dev = omap2_get_mpuss_device();
- iva_dev = omap2_get_iva_device();
+ mpu_dev = omap_device_get_by_hwmod_name("mpu");
+ iva_dev = omap_device_get_by_hwmod_name("iva");
if (!mpu_dev || !iva_dev) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
@@ -555,7 +550,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_beagle_init_early,
+ .init_early = omap3_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3_beagle_init,
.timer = &omap3_secure_timer,
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index e26c79cb6ce..e6ee8842285 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -37,7 +37,6 @@ static void __init ti8168_evm_init(void)
static void __init ti8168_evm_map_io(void)
{
- omap2_set_globals_ti816x();
omapti816x_map_common_io();
}
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index de61f15c48e..110e5b9db14 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -45,11 +45,11 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
static struct omap_globals omap242x_globals = {
.class = OMAP242X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x48014000),
- .sdrc = OMAP2420_SDRC_BASE,
- .sms = OMAP2420_SMS_BASE,
- .ctrl = OMAP242X_CTRL_BASE,
- .prm = OMAP2420_PRM_BASE,
- .cm = OMAP2420_CM_BASE,
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
};
void __init omap2_set_globals_242x(void)
@@ -59,7 +59,6 @@ void __init omap2_set_globals_242x(void)
void __init omap242x_map_io(void)
{
- omap2_set_globals_242x();
omap242x_map_common_io();
}
#endif
@@ -69,11 +68,11 @@ void __init omap242x_map_io(void)
static struct omap_globals omap243x_globals = {
.class = OMAP243X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4900a000),
- .sdrc = OMAP243X_SDRC_BASE,
- .sms = OMAP243X_SMS_BASE,
- .ctrl = OMAP243X_CTRL_BASE,
- .prm = OMAP2430_PRM_BASE,
- .cm = OMAP2430_CM_BASE,
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
};
void __init omap2_set_globals_243x(void)
@@ -83,7 +82,6 @@ void __init omap2_set_globals_243x(void)
void __init omap243x_map_io(void)
{
- omap2_set_globals_243x();
omap243x_map_common_io();
}
#endif
@@ -93,11 +91,11 @@ void __init omap243x_map_io(void)
static struct omap_globals omap3_globals = {
.class = OMAP343X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4830A000),
- .sdrc = OMAP343X_SDRC_BASE,
- .sms = OMAP343X_SMS_BASE,
- .ctrl = OMAP343X_CTRL_BASE,
- .prm = OMAP3430_PRM_BASE,
- .cm = OMAP3430_CM_BASE,
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
};
void __init omap2_set_globals_3xxx(void)
@@ -107,7 +105,6 @@ void __init omap2_set_globals_3xxx(void)
void __init omap3_map_io(void)
{
- omap2_set_globals_3xxx();
omap34xx_map_common_io();
}
@@ -122,9 +119,9 @@ void __init omap3_map_io(void)
static struct omap_globals ti816x_globals = {
.class = OMAP343X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
- .ctrl = TI816X_CTRL_BASE,
- .prm = TI816X_PRCM_BASE,
- .cm = TI816X_PRCM_BASE,
+ .ctrl = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
};
void __init omap2_set_globals_ti816x(void)
@@ -137,11 +134,11 @@ void __init omap2_set_globals_ti816x(void)
static struct omap_globals omap4_globals = {
.class = OMAP443X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
- .ctrl = OMAP443X_SCM_BASE,
- .ctrl_pad = OMAP443X_CTRL_BASE,
- .prm = OMAP4430_PRM_BASE,
- .cm = OMAP4430_CM_BASE,
- .cm2 = OMAP4430_CM2_BASE,
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+ .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+ .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
};
void __init omap2_set_globals_443x(void)
@@ -153,7 +150,6 @@ void __init omap2_set_globals_443x(void)
void __init omap4_map_io(void)
{
- omap2_set_globals_443x();
omap44xx_map_common_io();
}
#endif
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index aab884fecc5..e34d27f8c49 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -149,17 +149,11 @@ static struct omap3_control_regs control_context;
void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
{
- /* Static mapping, never released */
- if (omap2_globals->ctrl) {
- omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
- WARN_ON(!omap2_ctrl_base);
- }
+ if (omap2_globals->ctrl)
+ omap2_ctrl_base = omap2_globals->ctrl;
- /* Static mapping, never released */
- if (omap2_globals->ctrl_pad) {
- omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K);
- WARN_ON(!omap4_ctrl_pad_base);
- }
+ if (omap2_globals->ctrl_pad)
+ omap4_ctrl_pad_base = omap2_globals->ctrl_pad;
}
void __iomem *omap_ctrl_base_get(void)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 406b56cfedb..68ec03152d5 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -16,6 +16,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -76,6 +77,10 @@ static int __init omap4_l3_init(void)
struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
+ /* If dtb is there, the devices will be created dynamically */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
/*
* To avoid code running on other OMAPs in
* multi-omap builds
@@ -220,14 +225,6 @@ static inline void omap_init_camera(void)
#endif
}
-struct omap_device_pm_latency omap_keyboard_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
*sdp4430_keypad_data, struct omap_board_data *bdata)
{
@@ -247,9 +244,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
keypad_data = sdp4430_keypad_data;
pdev = omap_device_build(name, id, oh, keypad_data,
- sizeof(struct omap4_keypad_platform_data),
- omap_keyboard_latency,
- ARRAY_SIZE(omap_keyboard_latency), 0);
+ sizeof(struct omap4_keypad_platform_data), NULL, 0, 0);
if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
@@ -262,14 +257,6 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
}
#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static struct omap_device_pm_latency mbox_latencies[] = {
- [0] = {
- .activate_func = omap_device_enable_hwmods,
- .deactivate_func = omap_device_idle_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline void omap_init_mbox(void)
{
struct omap_hwmod *oh;
@@ -281,8 +268,7 @@ static inline void omap_init_mbox(void)
return;
}
- pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0,
- mbox_latencies, ARRAY_SIZE(mbox_latencies), 0);
+ pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0);
WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
__func__, PTR_ERR(pdev));
}
@@ -365,14 +351,6 @@ static inline void omap_init_mcpdm(void) {}
#include <plat/mcspi.h>
-struct omap_device_pm_latency omap_mcspi_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
{
struct platform_device *pdev;
@@ -403,8 +381,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
spi_num++;
pdev = omap_device_build(name, spi_num, oh, pdata,
- sizeof(*pdata), omap_mcspi_latency,
- ARRAY_SIZE(omap_mcspi_latency), 0);
+ sizeof(*pdata), NULL, 0, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
name, oh->name);
kfree(pdata);
@@ -730,14 +707,6 @@ static int __init omap2_init_devices(void)
arch_initcall(omap2_init_devices);
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static struct omap_device_pm_latency omap_wdt_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int __init omap_init_wdt(void)
{
int id = -1;
@@ -755,9 +724,7 @@ static int __init omap_init_wdt(void)
return -EINVAL;
}
- pdev = omap_device_build(dev_name, id, oh, NULL, 0,
- omap_wdt_latency,
- ARRAY_SIZE(omap_wdt_latency), 0);
+ pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
dev_name, oh->name);
return 0;
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 836f0f7d8c0..4036821a01f 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -37,14 +37,6 @@ static struct platform_device omap_display_device = {
},
};
-static struct omap_device_pm_latency omap_dss_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
struct omap_dss_hwmod_data {
const char *oh_name;
const char *dev_name;
@@ -165,8 +157,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
curr_dss_hwmod[i].id, oh, &pdata,
sizeof(struct omap_display_platform_data),
- omap_dss_latency,
- ARRAY_SIZE(omap_dss_latency), 0);
+ NULL, 0, 0);
if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
curr_dss_hwmod[i].oh_name))
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index ae8cb3fb183..a59a45a0096 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -87,14 +87,6 @@ static u16 reg_map[] = {
[CCDN] = 0xd8,
};
-static struct omap_device_pm_latency omap2_dma_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static void __iomem *dma_base;
static inline void dma_write(u32 val, int reg, int lch)
{
@@ -258,8 +250,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
p->errata = configure_dma_errata();
- pdev = omap_device_build(name, 0, oh, p, sizeof(*p),
- omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
+ pdev = omap_device_build(name, 0, oh, p, sizeof(*p), NULL, 0, 0);
kfree(p);
if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n",
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 652ccc57419..8cbfbc2918c 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -24,14 +24,6 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-static struct omap_device_pm_latency omap_gpio_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
{
struct platform_device *pdev;
@@ -108,9 +100,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
}
pdev = omap_device_build(name, id - 1, oh, pdata,
- sizeof(*pdata), omap_gpio_latency,
- ARRAY_SIZE(omap_gpio_latency),
- false);
+ sizeof(*pdata), NULL, 0, false);
kfree(pdata);
if (IS_ERR(pdev)) {
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 2dc002a388b..77085847e4e 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -409,31 +409,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
return 0;
}
-static struct omap_device_pm_latency omap_hsmmc_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
- /*
- * XXX There should also be an entry here to power off/on the
- * MMC regulators/PBIAS cells, etc.
- */
-};
-
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
- struct omap_device_pm_latency *ohl;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
struct omap_mmc_platform_data *mmc_data;
struct omap_mmc_dev_attr *mmc_dev_attr;
char *name;
int l;
- int ohl_cnt = 0;
mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
if (!mmc_data) {
@@ -448,8 +434,6 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
name = "omap_hsmmc";
- ohl = omap_hsmmc_latency;
- ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency);
l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
"mmc%d", ctrl_nr);
@@ -468,7 +452,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
}
pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
- sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
+ sizeof(struct omap_mmc_platform_data), NULL, 0, false);
if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
kfree(mmc_data->slots[0].name);
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 0b3ae9d9c3b..36e21091b06 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -23,14 +23,6 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-struct omap_device_pm_latency omap_spinlock_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- }
-};
-
int __init hwspinlocks_init(void)
{
int retval = 0;
@@ -48,9 +40,7 @@ int __init hwspinlocks_init(void)
if (oh == NULL)
return -EINVAL;
- pdev = omap_device_build(dev_name, 0, oh, NULL, 0,
- omap_spinlock_latency,
- ARRAY_SIZE(omap_spinlock_latency), false);
+ pdev = omap_device_build(dev_name, 0, oh, NULL, 0, NULL, 0, false);
if (IS_ERR(pdev)) {
pr_err("Can't build omap_device for %s:%s\n", dev_name,
oh_name);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index f01273006e4..a5d8dce2a70 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -34,8 +34,8 @@
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
-#include "io.h"
+#include <plat/common.h>
#include <plat/omap-pm.h>
#include "voltage.h"
#include "powerdomain.h"
@@ -43,6 +43,7 @@
#include "clockdomain.h"
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
+#include <plat/common.h>
/*
* The machine specific code may provide the extra mapping besides the
@@ -239,26 +240,11 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
};
#endif
-static void __init _omap2_map_common_io(void)
-{
- /* Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but we must also do it here because of the CPU
- * revision check below.
- */
- local_flush_tlb_all();
- flush_cache_all();
-
- omap2_check_revision();
- omap_sram_init();
- omap_init_consistent_dma_size();
-}
-
#ifdef CONFIG_SOC_OMAP2420
void __init omap242x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -267,7 +253,6 @@ void __init omap243x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -275,7 +260,6 @@ void __init omap243x_map_common_io(void)
void __init omap34xx_map_common_io(void)
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -283,7 +267,6 @@ void __init omap34xx_map_common_io(void)
void __init omapti816x_map_common_io(void)
{
iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -291,7 +274,6 @@ void __init omapti816x_map_common_io(void)
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -337,33 +319,16 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
/* See irq.c, omap4-common.c and entry-macro.S */
void __iomem *omap_irq_base;
-void __init omap2_init_common_infrastructure(void)
+static void __init omap_common_init_early(void)
{
- u8 postsetup_state;
+ omap2_check_revision();
+ omap_ioremap_init();
+ omap_init_consistent_dma_size();
+}
- if (cpu_is_omap242x()) {
- omap2xxx_voltagedomains_init();
- omap242x_powerdomains_init();
- omap242x_clockdomains_init();
- omap2420_hwmod_init();
- } else if (cpu_is_omap243x()) {
- omap2xxx_voltagedomains_init();
- omap243x_powerdomains_init();
- omap243x_clockdomains_init();
- omap2430_hwmod_init();
- } else if (cpu_is_omap34xx()) {
- omap3xxx_voltagedomains_init();
- omap3xxx_powerdomains_init();
- omap3xxx_clockdomains_init();
- omap3xxx_hwmod_init();
- } else if (cpu_is_omap44xx()) {
- omap44xx_voltagedomains_init();
- omap44xx_powerdomains_init();
- omap44xx_clockdomains_init();
- omap44xx_hwmod_init();
- } else {
- pr_err("Could not init hwmod data - unknown SoC\n");
- }
+static void __init omap_hwmod_init_postsetup(void)
+{
+ u8 postsetup_state;
/* Set the default postsetup state for all hwmods */
#ifdef CONFIG_PM_RUNTIME
@@ -392,67 +357,101 @@ void __init omap2_init_common_infrastructure(void)
&postsetup_state);
omap_pm_if_early_init();
-
- if (cpu_is_omap2420())
- omap2420_clk_init();
- else if (cpu_is_omap2430())
- omap2430_clk_init();
- else if (cpu_is_omap34xx())
- omap3xxx_clk_init();
- else if (cpu_is_omap44xx())
- omap4xxx_clk_init();
- else
- pr_err("Could not init clock framework - unknown SoC\n");
}
void __init omap2420_init_early(void)
{
- omap2_init_common_infrastructure();
+ omap2_set_globals_242x();
+ omap_common_init_early();
+ omap2xxx_voltagedomains_init();
+ omap242x_powerdomains_init();
+ omap242x_clockdomains_init();
+ omap2420_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap2420_clk_init();
}
void __init omap2430_init_early(void)
{
- omap2_init_common_infrastructure();
+ omap2_set_globals_243x();
+ omap_common_init_early();
+ omap2xxx_voltagedomains_init();
+ omap243x_powerdomains_init();
+ omap243x_clockdomains_init();
+ omap2430_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap2430_clk_init();
+}
+
+/*
+ * Currently only board-omap3beagle.c should call this because of the
+ * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
+ */
+void __init omap3_init_early(void)
+{
+ omap2_set_globals_3xxx();
+ omap_common_init_early();
+ omap3xxx_voltagedomains_init();
+ omap3xxx_powerdomains_init();
+ omap3xxx_clockdomains_init();
+ omap3xxx_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap3xxx_clk_init();
}
void __init omap3430_init_early(void)
{
- omap2_init_common_infrastructure();
+ omap3_init_early();
}
void __init omap35xx_init_early(void)
{
- omap2_init_common_infrastructure();
+ omap3_init_early();
}
void __init omap3630_init_early(void)
{
- omap2_init_common_infrastructure();
+ omap3_init_early();
}
void __init am35xx_init_early(void)
{
- omap2_init_common_infrastructure();
+ omap3_init_early();
}
void __init ti816x_init_early(void)
{
- omap2_init_common_infrastructure();
+ omap2_set_globals_ti816x();
+ omap_common_init_early();
+ omap3xxx_voltagedomains_init();
+ omap3xxx_powerdomains_init();
+ omap3xxx_clockdomains_init();
+ omap3xxx_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap3xxx_clk_init();
}
void __init omap4430_init_early(void)
{
- omap2_init_common_infrastructure();
+ omap2_set_globals_443x();
+ omap_common_init_early();
+ omap44xx_voltagedomains_init();
+ omap44xx_powerdomains_init();
+ omap44xx_clockdomains_init();
+ omap44xx_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap4xxx_clk_init();
}
void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
+ omap_sram_init();
+
if (cpu_is_omap24xx() || omap3_has_sdrc()) {
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
}
-
}
/*
diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h
index fd230c6cded..e69de29bb2d 100644
--- a/arch/arm/mach-omap2/io.h
+++ b/arch/arm/mach-omap2/io.h
@@ -1,7 +0,0 @@
-
-#ifndef __MACH_OMAP2_IO_H__
-#define __MACH_OMAP2_IO_H__
-
-extern int __init omap_sram_init(void);
-
-#endif /* __MACH_OMAP2_IO_H__ */
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 5063f253c4b..292eee3be15 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -122,14 +122,6 @@ static int omap3_enable_st_clock(unsigned int id, bool enable)
return 0;
}
-struct omap_device_pm_latency omap2_mcbsp_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
{
int id, count = 1;
@@ -175,8 +167,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
count++;
}
pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
- sizeof(*pdata), omap2_mcbsp_latency,
- ARRAY_SIZE(omap2_mcbsp_latency), false);
+ sizeof(*pdata), NULL, 0, false);
kfree(pdata);
if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 889464dc7b2..4412ddb7b3f 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -102,8 +102,11 @@ void __init smp_init_cpus(void)
{
unsigned int i, ncores;
- /* Never released */
- scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256);
+ /*
+ * Currently we can't call ioremap here because
+ * SoC detection won't work until after init_early.
+ */
+ scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE);
BUG_ON(!scu_base);
ncores = scu_get_core_count(scu_base);
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index 7b9f1909ddb..c8b1bef92e5 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -1,25 +1,25 @@
/*
- * OMAP4XXX L3 Interconnect error handling driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+ * OMAP4XXX L3 Interconnect error handling driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
@@ -55,12 +55,12 @@
static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
{
- struct omap4_l3 *l3 = _l3;
- int inttype, i, j;
+ struct omap4_l3 *l3 = _l3;
+ int inttype, i, k;
int err_src = 0;
- u32 std_err_main_addr, std_err_main, err_reg;
- u32 base, slave_addr, clear;
- char *source_name;
+ u32 std_err_main, err_reg, clear, masterid;
+ void __iomem *base, *l3_targ_base;
+ char *target_name, *master_name = "UN IDENTIFIED";
/* Get the Type of interrupt */
inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
@@ -70,43 +70,50 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
* Read the regerr register of the clock domain
* to determine the source
*/
- base = (u32)l3->l3_base[i];
- err_reg = readl(base + l3_flagmux[i] + (inttype << 3));
+ base = l3->l3_base[i];
+ err_reg = __raw_readl(base + l3_flagmux[i] +
+ + L3_FLAGMUX_REGERR0 + (inttype << 3));
/* Get the corresponding error and analyse */
if (err_reg) {
/* Identify the source from control status register */
- for (j = 0; !(err_reg & (1 << j)); j++)
- ;
+ err_src = __ffs(err_reg);
- err_src = j;
/* Read the stderrlog_main_source from clk domain */
- std_err_main_addr = base + *(l3_targ[i] + err_src);
- std_err_main = readl(std_err_main_addr);
+ l3_targ_base = base + *(l3_targ[i] + err_src);
+ std_err_main = __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
+ masterid = __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_MSTADDR);
switch (std_err_main & CUSTOM_ERROR) {
case STANDARD_ERROR:
- source_name =
- l3_targ_stderrlog_main_name[i][err_src];
-
- slave_addr = std_err_main_addr +
- L3_SLAVE_ADDRESS_OFFSET;
- WARN(true, "L3 standard error: SOURCE:%s at address 0x%x\n",
- source_name, readl(slave_addr));
+ target_name =
+ l3_targ_inst_name[i][err_src];
+ WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
+ target_name,
+ __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_SLVOFSLSB));
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, std_err_main_addr);
+ writel(clear, l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
break;
case CUSTOM_ERROR:
- source_name =
- l3_targ_stderrlog_main_name[i][err_src];
-
- WARN(true, "CUSTOM SRESP error with SOURCE:%s\n",
- source_name);
+ target_name =
+ l3_targ_inst_name[i][err_src];
+ for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
+ if (masterid == l3_masters[k].id)
+ master_name =
+ l3_masters[k].name;
+ }
+ WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
+ master_name, target_name);
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, std_err_main_addr);
+ writel(clear, l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
break;
default:
@@ -120,12 +127,11 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
return IRQ_HANDLED;
}
-static int __init omap4_l3_probe(struct platform_device *pdev)
+static int __devinit omap4_l3_probe(struct platform_device *pdev)
{
- static struct omap4_l3 *l3;
- struct resource *res;
- int ret;
- int irq;
+ static struct omap4_l3 *l3;
+ struct resource *res;
+ int ret;
l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
if (!l3)
@@ -177,27 +183,25 @@ static int __init omap4_l3_probe(struct platform_device *pdev)
/*
* Setup interrupt Handlers
*/
- irq = platform_get_irq(pdev, 0);
- ret = request_irq(irq,
+ l3->debug_irq = platform_get_irq(pdev, 0);
+ ret = request_irq(l3->debug_irq,
l3_interrupt_handler,
IRQF_DISABLED, "l3-dbg-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_DBG);
+ OMAP44XX_IRQ_L3_DBG);
goto err3;
}
- l3->debug_irq = irq;
- irq = platform_get_irq(pdev, 1);
- ret = request_irq(irq,
+ l3->app_irq = platform_get_irq(pdev, 1);
+ ret = request_irq(l3->app_irq,
l3_interrupt_handler,
IRQF_DISABLED, "l3-app-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_APP);
+ OMAP44XX_IRQ_L3_APP);
goto err4;
}
- l3->app_irq = irq;
return 0;
@@ -214,9 +218,9 @@ err0:
return ret;
}
-static int __exit omap4_l3_remove(struct platform_device *pdev)
+static int __devexit omap4_l3_remove(struct platform_device *pdev)
{
- struct omap4_l3 *l3 = platform_get_drvdata(pdev);
+ struct omap4_l3 *l3 = platform_get_drvdata(pdev);
free_irq(l3->app_irq, l3);
free_irq(l3->debug_irq, l3);
@@ -228,16 +232,29 @@ static int __exit omap4_l3_remove(struct platform_device *pdev)
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id l3_noc_match[] = {
+ {.compatible = "ti,omap4-l3-noc", },
+ {},
+}
+MODULE_DEVICE_TABLE(of, l3_noc_match);
+#else
+#define l3_noc_match NULL
+#endif
+
static struct platform_driver omap4_l3_driver = {
- .remove = __exit_p(omap4_l3_remove),
+ .probe = omap4_l3_probe,
+ .remove = __devexit_p(omap4_l3_remove),
.driver = {
- .name = "omap_l3_noc",
+ .name = "omap_l3_noc",
+ .owner = THIS_MODULE,
+ .of_match_table = l3_noc_match,
},
};
static int __init omap4_l3_init(void)
{
- return platform_driver_probe(&omap4_l3_driver, omap4_l3_probe);
+ return platform_driver_register(&omap4_l3_driver);
}
postcore_initcall_sync(omap4_l3_init);
diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h
index 359b83348ae..90b50984cd2 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.h
+++ b/arch/arm/mach-omap2/omap_l3_noc.h
@@ -1,132 +1,162 @@
- /*
- * OMAP4XXX L3 Interconnect error handling driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP4XXX L3 Interconnect error handling driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-/*
- * L3 register offsets
- */
#define L3_MODULES 3
#define CLEAR_STDERR_LOG (1 << 31)
#define CUSTOM_ERROR 0x2
#define STANDARD_ERROR 0x0
#define INBAND_ERROR 0x0
-#define EMIF_KERRLOG_OFFSET 0x10
-#define L3_SLAVE_ADDRESS_OFFSET 0x14
-#define LOGICAL_ADDR_ERRORLOG 0x4
#define L3_APPLICATION_ERROR 0x0
#define L3_DEBUG_ERROR 0x1
-u32 l3_flagmux[L3_MODULES] = {
- 0x50C,
- 0x100C,
- 0X020C
+/* L3 TARG register offsets */
+#define L3_TARG_STDERRLOG_MAIN 0x48
+#define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c
+#define L3_TARG_STDERRLOG_MSTADDR 0x68
+#define L3_FLAGMUX_REGERR0 0xc
+
+#define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0]))
+
+static u32 l3_flagmux[L3_MODULES] = {
+ 0x500,
+ 0x1000,
+ 0X0200
};
-/*
- * L3 Target standard Error register offsets
- */
-u32 l3_targ_stderrlog_main_clk1[] = {
- 0x148, /* DMM1 */
- 0x248, /* DMM2 */
- 0x348, /* ABE */
- 0x448, /* L4CFG */
- 0x648 /* CLK2 PWR DISC */
+/* L3 Target standard Error register offsets */
+static u32 l3_targ_inst_clk1[] = {
+ 0x100, /* DMM1 */
+ 0x200, /* DMM2 */
+ 0x300, /* ABE */
+ 0x400, /* L4CFG */
+ 0x600 /* CLK2 PWR DISC */
};
-u32 l3_targ_stderrlog_main_clk2[] = {
- 0x548, /* CORTEX M3 */
- 0x348, /* DSS */
- 0x148, /* GPMC */
- 0x448, /* ISS */
- 0x748, /* IVAHD */
- 0xD48, /* missing in TRM corresponds to AES1*/
- 0x948, /* L4 PER0*/
- 0x248, /* OCMRAM */
- 0x148, /* missing in TRM corresponds to GPMC sERROR*/
- 0x648, /* SGX */
- 0x848, /* SL2 */
- 0x1648, /* C2C */
- 0x1148, /* missing in TRM corresponds PWR DISC CLK1*/
- 0xF48, /* missing in TRM corrsponds to SHA1*/
- 0xE48, /* missing in TRM corresponds to AES2*/
- 0xC48, /* L4 PER3 */
- 0xA48, /* L4 PER1*/
- 0xB48 /* L4 PER2*/
+static u32 l3_targ_inst_clk2[] = {
+ 0x500, /* CORTEX M3 */
+ 0x300, /* DSS */
+ 0x100, /* GPMC */
+ 0x400, /* ISS */
+ 0x700, /* IVAHD */
+ 0xD00, /* missing in TRM corresponds to AES1*/
+ 0x900, /* L4 PER0*/
+ 0x200, /* OCMRAM */
+ 0x100, /* missing in TRM corresponds to GPMC sERROR*/
+ 0x600, /* SGX */
+ 0x800, /* SL2 */
+ 0x1600, /* C2C */
+ 0x1100, /* missing in TRM corresponds PWR DISC CLK1*/
+ 0xF00, /* missing in TRM corrsponds to SHA1*/
+ 0xE00, /* missing in TRM corresponds to AES2*/
+ 0xC00, /* L4 PER3 */
+ 0xA00, /* L4 PER1*/
+ 0xB00 /* L4 PER2*/
};
-u32 l3_targ_stderrlog_main_clk3[] = {
- 0x0148 /* EMUSS */
+static u32 l3_targ_inst_clk3[] = {
+ 0x0100 /* EMUSS */
};
-char *l3_targ_stderrlog_main_name[L3_MODULES][18] = {
+static struct l3_masters_data {
+ u32 id;
+ char name[10];
+} l3_masters[] = {
+ { 0x0 , "MPU"},
+ { 0x10, "CS_ADP"},
+ { 0x14, "xxx"},
+ { 0x20, "DSP"},
+ { 0x30, "IVAHD"},
+ { 0x40, "ISS"},
+ { 0x44, "DucatiM3"},
+ { 0x48, "FaceDetect"},
+ { 0x50, "SDMA_Rd"},
+ { 0x54, "SDMA_Wr"},
+ { 0x58, "xxx"},
+ { 0x5C, "xxx"},
+ { 0x60, "SGX"},
+ { 0x70, "DSS"},
+ { 0x80, "C2C"},
+ { 0x88, "xxx"},
+ { 0x8C, "xxx"},
+ { 0x90, "HSI"},
+ { 0xA0, "MMC1"},
+ { 0xA4, "MMC2"},
+ { 0xA8, "MMC6"},
+ { 0xB0, "UNIPRO1"},
+ { 0xC0, "USBHOSTHS"},
+ { 0xC4, "USBOTGHS"},
+ { 0xC8, "USBHOSTFS"}
+};
+
+static char *l3_targ_inst_name[L3_MODULES][18] = {
{
- "DMM1",
- "DMM2",
- "ABE",
- "L4CFG",
- "CLK2 PWR DISC",
+ "DMM1",
+ "DMM2",
+ "ABE",
+ "L4CFG",
+ "CLK2 PWR DISC",
},
{
- "CORTEX M3" ,
- "DSS ",
- "GPMC ",
- "ISS ",
- "IVAHD ",
- "AES1",
- "L4 PER0",
- "OCMRAM ",
- "GPMC sERROR",
- "SGX ",
- "SL2 ",
- "C2C ",
- "PWR DISC CLK1",
- "SHA1",
- "AES2",
- "L4 PER3",
- "L4 PER1",
- "L4 PER2",
+ "CORTEX M3" ,
+ "DSS ",
+ "GPMC ",
+ "ISS ",
+ "IVAHD ",
+ "AES1",
+ "L4 PER0",
+ "OCMRAM ",
+ "GPMC sERROR",
+ "SGX ",
+ "SL2 ",
+ "C2C ",
+ "PWR DISC CLK1",
+ "SHA1",
+ "AES2",
+ "L4 PER3",
+ "L4 PER1",
+ "L4 PER2",
},
{
- "EMUSS",
+ "EMUSS",
},
};
-u32 *l3_targ[L3_MODULES] = {
- l3_targ_stderrlog_main_clk1,
- l3_targ_stderrlog_main_clk2,
- l3_targ_stderrlog_main_clk3,
+static u32 *l3_targ[L3_MODULES] = {
+ l3_targ_inst_clk1,
+ l3_targ_inst_clk2,
+ l3_targ_inst_clk3,
};
struct omap4_l3 {
- struct device *dev;
- struct clk *ick;
+ struct device *dev;
+ struct clk *ick;
/* memory base */
- void __iomem *l3_base[4];
+ void __iomem *l3_base[L3_MODULES];
- int debug_irq;
- int app_irq;
+ int debug_irq;
+ int app_irq;
};
-
#endif
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index 873c0e33b51..a05a62f9ee5 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -1,26 +1,26 @@
- /*
- * OMAP3XXX L3 Interconnect Driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP3XXX L3 Interconnect Driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Felipe Balbi <balbi@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -135,7 +135,7 @@ static char *omap3_l3_initiator_string(u8 initid)
}
}
-/**
+/*
* omap3_l3_block_irq - handles a register block's irq
* @l3: struct omap3_l3 *
* @base: register block base address
@@ -150,30 +150,29 @@ static char *omap3_l3_initiator_string(u8 initid)
static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
u64 error, int error_addr)
{
- u8 code = omap3_l3_decode_error_code(error);
- u8 initid = omap3_l3_decode_initid(error);
- u8 multi = error & L3_ERROR_LOG_MULTI;
- u32 address = omap3_l3_decode_addr(error_addr);
+ u8 code = omap3_l3_decode_error_code(error);
+ u8 initid = omap3_l3_decode_initid(error);
+ u8 multi = error & L3_ERROR_LOG_MULTI;
+ u32 address = omap3_l3_decode_addr(error_addr);
WARN(true, "%s seen by %s %s at address %x\n",
- omap3_l3_code_string(code),
- omap3_l3_initiator_string(initid),
- multi ? "Multiple Errors" : "",
- address);
+ omap3_l3_code_string(code),
+ omap3_l3_initiator_string(initid),
+ multi ? "Multiple Errors" : "", address);
return IRQ_HANDLED;
}
static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
{
- struct omap3_l3 *l3 = _l3;
- u64 status, clear;
- u64 error;
- u64 error_addr;
- u64 err_source = 0;
- void __iomem *base;
- int int_type;
- irqreturn_t ret = IRQ_NONE;
+ struct omap3_l3 *l3 = _l3;
+ u64 status, clear;
+ u64 error;
+ u64 error_addr;
+ u64 err_source = 0;
+ void __iomem *base;
+ int int_type;
+ irqreturn_t ret = IRQ_NONE;
int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
if (!int_type) {
@@ -191,14 +190,12 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
}
/* identify the error source */
- for (err_source = 0; !(status & (1 << err_source)); err_source++)
- ;
+ err_source = __ffs(status);
- base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
+ base = l3->rt + omap3_l3_bases[int_type][err_source];
error = omap3_l3_readll(base, L3_ERROR_LOG);
if (error) {
error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR);
-
ret |= omap3_l3_block_irq(l3, error, error_addr);
}
@@ -215,9 +212,9 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
static int __init omap3_l3_probe(struct platform_device *pdev)
{
- struct omap3_l3 *l3;
- struct resource *res;
- int ret;
+ struct omap3_l3 *l3;
+ struct resource *res;
+ int ret;
l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
if (!l3)
diff --git a/arch/arm/mach-omap2/omap_l3_smx.h b/arch/arm/mach-omap2/omap_l3_smx.h
index ba2ed9a850c..4f3cebca417 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.h
+++ b/arch/arm/mach-omap2/omap_l3_smx.h
@@ -1,26 +1,26 @@
- /*
- * OMAP3XXX L3 Interconnect Driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP3XXX L3 Interconnect Driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Felipe Balbi <balbi@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
@@ -40,7 +40,7 @@
#define L3_SI_CONTROL 0x020
#define L3_SI_FLAG_STATUS_0 0x510
-const u64 shift = 1;
+static const u64 shift = 1;
#define L3_STATUS_0_MPUIA_BRST (shift << 0)
#define L3_STATUS_0_MPUIA_RSP (shift << 1)
@@ -78,32 +78,32 @@ const u64 shift = 1;
#define L3_STATUS_0_L4EMUTA_REQ (shift << 60)
#define L3_STATUS_0_MAD2DTA_REQ (shift << 61)
-#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \
- | L3_STATUS_0_MPUIA_RSP \
- | L3_STATUS_0_IVAIA_BRST \
- | L3_STATUS_0_IVAIA_RSP \
- | L3_STATUS_0_SGXIA_BRST \
- | L3_STATUS_0_SGXIA_RSP \
- | L3_STATUS_0_CAMIA_BRST \
- | L3_STATUS_0_CAMIA_RSP \
- | L3_STATUS_0_DISPIA_BRST \
- | L3_STATUS_0_DISPIA_RSP \
- | L3_STATUS_0_DMARDIA_BRST \
- | L3_STATUS_0_DMARDIA_RSP \
- | L3_STATUS_0_DMAWRIA_BRST \
- | L3_STATUS_0_DMAWRIA_RSP \
- | L3_STATUS_0_USBOTGIA_BRST \
- | L3_STATUS_0_USBOTGIA_RSP \
- | L3_STATUS_0_USBHOSTIA_BRST \
- | L3_STATUS_0_SMSTA_REQ \
- | L3_STATUS_0_GPMCTA_REQ \
- | L3_STATUS_0_OCMRAMTA_REQ \
- | L3_STATUS_0_OCMROMTA_REQ \
- | L3_STATUS_0_IVATA_REQ \
- | L3_STATUS_0_SGXTA_REQ \
- | L3_STATUS_0_L4CORETA_REQ \
- | L3_STATUS_0_L4PERTA_REQ \
- | L3_STATUS_0_L4EMUTA_REQ \
+#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \
+ | L3_STATUS_0_MPUIA_RSP \
+ | L3_STATUS_0_IVAIA_BRST \
+ | L3_STATUS_0_IVAIA_RSP \
+ | L3_STATUS_0_SGXIA_BRST \
+ | L3_STATUS_0_SGXIA_RSP \
+ | L3_STATUS_0_CAMIA_BRST \
+ | L3_STATUS_0_CAMIA_RSP \
+ | L3_STATUS_0_DISPIA_BRST \
+ | L3_STATUS_0_DISPIA_RSP \
+ | L3_STATUS_0_DMARDIA_BRST \
+ | L3_STATUS_0_DMARDIA_RSP \
+ | L3_STATUS_0_DMAWRIA_BRST \
+ | L3_STATUS_0_DMAWRIA_RSP \
+ | L3_STATUS_0_USBOTGIA_BRST \
+ | L3_STATUS_0_USBOTGIA_RSP \
+ | L3_STATUS_0_USBHOSTIA_BRST \
+ | L3_STATUS_0_SMSTA_REQ \
+ | L3_STATUS_0_GPMCTA_REQ \
+ | L3_STATUS_0_OCMRAMTA_REQ \
+ | L3_STATUS_0_OCMROMTA_REQ \
+ | L3_STATUS_0_IVATA_REQ \
+ | L3_STATUS_0_SGXTA_REQ \
+ | L3_STATUS_0_L4CORETA_REQ \
+ | L3_STATUS_0_L4PERTA_REQ \
+ | L3_STATUS_0_L4EMUTA_REQ \
| L3_STATUS_0_MAD2DTA_REQ)
#define L3_SI_FLAG_STATUS_1 0x530
@@ -137,19 +137,19 @@ const u64 shift = 1;
enum omap3_l3_initiator_id {
/* LCD has 1 ID */
- OMAP_L3_LCD = 29,
+ OMAP_L3_LCD = 29,
/* SAD2D has 1 ID */
- OMAP_L3_SAD2D = 28,
+ OMAP_L3_SAD2D = 28,
/* MPU has 5 IDs */
- OMAP_L3_IA_MPU_SS_1 = 27,
- OMAP_L3_IA_MPU_SS_2 = 26,
- OMAP_L3_IA_MPU_SS_3 = 25,
- OMAP_L3_IA_MPU_SS_4 = 24,
- OMAP_L3_IA_MPU_SS_5 = 23,
+ OMAP_L3_IA_MPU_SS_1 = 27,
+ OMAP_L3_IA_MPU_SS_2 = 26,
+ OMAP_L3_IA_MPU_SS_3 = 25,
+ OMAP_L3_IA_MPU_SS_4 = 24,
+ OMAP_L3_IA_MPU_SS_5 = 23,
/* IVA2.2 SS has 3 IDs*/
- OMAP_L3_IA_IVA_SS_1 = 22,
- OMAP_L3_IA_IVA_SS_2 = 21,
- OMAP_L3_IA_IVA_SS_3 = 20,
+ OMAP_L3_IA_IVA_SS_1 = 22,
+ OMAP_L3_IA_IVA_SS_2 = 21,
+ OMAP_L3_IA_IVA_SS_3 = 20,
/* IVA 2.2 SS DMA has 6 IDS */
OMAP_L3_IA_IVA_SS_DMA_1 = 19,
OMAP_L3_IA_IVA_SS_DMA_2 = 18,
@@ -158,25 +158,25 @@ enum omap3_l3_initiator_id {
OMAP_L3_IA_IVA_SS_DMA_5 = 15,
OMAP_L3_IA_IVA_SS_DMA_6 = 14,
/* SGX has 1 ID */
- OMAP_L3_IA_SGX = 13,
+ OMAP_L3_IA_SGX = 13,
/* CAM has 3 ID */
- OMAP_L3_IA_CAM_1 = 12,
- OMAP_L3_IA_CAM_2 = 11,
- OMAP_L3_IA_CAM_3 = 10,
+ OMAP_L3_IA_CAM_1 = 12,
+ OMAP_L3_IA_CAM_2 = 11,
+ OMAP_L3_IA_CAM_3 = 10,
/* DAP has 1 ID */
- OMAP_L3_IA_DAP = 9,
+ OMAP_L3_IA_DAP = 9,
/* SDMA WR has 2 IDs */
- OMAP_L3_SDMA_WR_1 = 8,
- OMAP_L3_SDMA_WR_2 = 7,
+ OMAP_L3_SDMA_WR_1 = 8,
+ OMAP_L3_SDMA_WR_2 = 7,
/* SDMA RD has 4 IDs */
- OMAP_L3_SDMA_RD_1 = 6,
- OMAP_L3_SDMA_RD_2 = 5,
- OMAP_L3_SDMA_RD_3 = 4,
- OMAP_L3_SDMA_RD_4 = 3,
+ OMAP_L3_SDMA_RD_1 = 6,
+ OMAP_L3_SDMA_RD_2 = 5,
+ OMAP_L3_SDMA_RD_3 = 4,
+ OMAP_L3_SDMA_RD_4 = 3,
/* HSUSB OTG has 1 ID */
- OMAP_L3_USBOTG = 2,
+ OMAP_L3_USBOTG = 2,
/* HSUSB HOST has 1 ID */
- OMAP_L3_USBHOST = 1,
+ OMAP_L3_USBHOST = 1,
};
enum omap3_l3_code {
@@ -192,21 +192,21 @@ enum omap3_l3_code {
};
struct omap3_l3 {
- struct device *dev;
- struct clk *ick;
+ struct device *dev;
+ struct clk *ick;
/* memory base*/
- void __iomem *rt;
+ void __iomem *rt;
- int debug_irq;
- int app_irq;
+ int debug_irq;
+ int app_irq;
/* true when and inband functional error occurs */
- unsigned inband:1;
+ unsigned inband:1;
};
/* offsets for l3 agents in order with the Flag status register */
-unsigned int __iomem omap3_l3_app_bases[] = {
+static unsigned int omap3_l3_app_bases[] = {
/* MPU IA */
0x1400,
0x1400,
@@ -305,7 +305,7 @@ unsigned int __iomem omap3_l3_app_bases[] = {
0,
};
-unsigned int __iomem omap3_l3_debug_bases[] = {
+static unsigned int omap3_l3_debug_bases[] = {
/* MPU DATA IA */
0x1400,
/* RESERVED */
@@ -321,7 +321,7 @@ unsigned int __iomem omap3_l3_debug_bases[] = {
/* REST RESERVED */
};
-u32 *omap3_l3_bases[] = {
+static u32 *omap3_l3_bases[] = {
omap3_l3_app_bases,
omap3_l3_debug_bases,
};
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 0844e2ecfb4..2ab7a9e17fe 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -26,38 +26,7 @@
static struct omap_device_pm_latency *pm_lats;
-static struct device *mpu_dev;
-static struct device *iva_dev;
-static struct device *l3_dev;
-static struct device *dsp_dev;
-
-struct device *omap2_get_mpuss_device(void)
-{
- WARN_ON_ONCE(!mpu_dev);
- return mpu_dev;
-}
-
-struct device *omap2_get_iva_device(void)
-{
- WARN_ON_ONCE(!iva_dev);
- return iva_dev;
-}
-
-struct device *omap2_get_l3_device(void)
-{
- WARN_ON_ONCE(!l3_dev);
- return l3_dev;
-}
-
-struct device *omap4_get_dsp_device(void)
-{
- WARN_ON_ONCE(!dsp_dev);
- return dsp_dev;
-}
-EXPORT_SYMBOL(omap4_get_dsp_device);
-
-/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
-static int _init_omap_device(char *name, struct device **new_dev)
+static int _init_omap_device(char *name)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
@@ -72,8 +41,6 @@ static int _init_omap_device(char *name, struct device **new_dev)
__func__, name))
return -ENODEV;
- *new_dev = &pdev->dev;
-
return 0;
}
@@ -82,16 +49,16 @@ static int _init_omap_device(char *name, struct device **new_dev)
*/
static void omap2_init_processor_devices(void)
{
- _init_omap_device("mpu", &mpu_dev);
+ _init_omap_device("mpu");
if (omap3_has_iva())
- _init_omap_device("iva", &iva_dev);
+ _init_omap_device("iva");
if (cpu_is_omap44xx()) {
- _init_omap_device("l3_main_1", &l3_dev);
- _init_omap_device("dsp", &dsp_dev);
- _init_omap_device("iva", &iva_dev);
+ _init_omap_device("l3_main_1");
+ _init_omap_device("dsp");
+ _init_omap_device("iva");
} else {
- _init_omap_device("l3_main", &l3_dev);
+ _init_omap_device("l3_main");
}
}
@@ -169,18 +136,26 @@ err:
* in the opp entry
*/
static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
- struct device *dev)
+ const char *oh_name)
{
struct voltagedomain *voltdm;
struct clk *clk;
struct opp *opp;
unsigned long freq, bootup_volt;
+ struct device *dev;
- if (!vdd_name || !clk_name || !dev) {
+ if (!vdd_name || !clk_name || !oh_name) {
pr_err("%s: invalid parameters\n", __func__);
goto exit;
}
+ dev = omap_device_get_by_hwmod_name(oh_name);
+ if (IS_ERR(dev)) {
+ pr_err("%s: Unable to get dev pointer for hwmod %s\n",
+ __func__, oh_name);
+ goto exit;
+ }
+
voltdm = voltdm_lookup(vdd_name);
if (IS_ERR(voltdm)) {
pr_err("%s: unable to get vdd pointer for vdd_%s\n",
@@ -224,8 +199,8 @@ static void __init omap3_init_voltages(void)
if (!cpu_is_omap34xx())
return;
- omap2_set_init_voltage("mpu_iva", "dpll1_ck", mpu_dev);
- omap2_set_init_voltage("core", "l3_ick", l3_dev);
+ omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_ick", "l3_main");
}
static void __init omap4_init_voltages(void)
@@ -233,14 +208,15 @@ static void __init omap4_init_voltages(void)
if (!cpu_is_omap44xx())
return;
- omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev);
- omap2_set_init_voltage("core", "l3_div_ck", l3_dev);
- omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev);
+ omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
+ omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
}
static int __init omap2_common_pm_init(void)
{
- omap2_init_processor_devices();
+ if (!of_have_populated_dt())
+ omap2_init_processor_devices();
omap_pm_if_init();
return 0;
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 2e40a5cf016..8db5f035eb0 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -151,17 +151,10 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
{
- /* Static mapping, never released */
- if (omap2_globals->prm) {
- prm_base = ioremap(omap2_globals->prm, SZ_8K);
- WARN_ON(!prm_base);
- }
- if (omap2_globals->cm) {
- cm_base = ioremap(omap2_globals->cm, SZ_8K);
- WARN_ON(!cm_base);
- }
- if (omap2_globals->cm2) {
- cm2_base = ioremap(omap2_globals->cm2, SZ_8K);
- WARN_ON(!cm2_base);
- }
+ if (omap2_globals->prm)
+ prm_base = omap2_globals->prm;
+ if (omap2_globals->cm)
+ cm_base = omap2_globals->cm;
+ if (omap2_globals->cm2)
+ cm2_base = omap2_globals->cm2;
}
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index da6f3a63b5d..8f278287477 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -117,15 +117,10 @@ int omap2_sdrc_get_params(unsigned long r,
void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
{
- /* Static mapping, never released */
- if (omap2_globals->sdrc) {
- omap2_sdrc_base = ioremap(omap2_globals->sdrc, SZ_64K);
- WARN_ON(!omap2_sdrc_base);
- }
- if (omap2_globals->sms) {
- omap2_sms_base = ioremap(omap2_globals->sms, SZ_64K);
- WARN_ON(!omap2_sms_base);
- }
+ if (omap2_globals->sdrc)
+ omap2_sdrc_base = omap2_globals->sdrc;
+ if (omap2_globals->sms)
+ omap2_sms_base = omap2_globals->sms;
}
/**
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3d1c1d393f8..9992dbfdfdb 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -107,28 +107,6 @@ struct omap_uart_state {
static LIST_HEAD(uart_list);
static u8 num_uarts;
-static int uart_idle_hwmod(struct omap_device *od)
-{
- omap_hwmod_idle(od->hwmods[0]);
-
- return 0;
-}
-
-static int uart_enable_hwmod(struct omap_device *od)
-{
- omap_hwmod_enable(od->hwmods[0]);
-
- return 0;
-}
-
-static struct omap_device_pm_latency omap_uart_latency[] = {
- {
- .deactivate_func = uart_idle_hwmod,
- .activate_func = uart_enable_hwmod,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline unsigned int __serial_read_reg(struct uart_port *up,
int offset)
{
@@ -800,8 +778,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
return;
pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
- omap_uart_latency,
- ARRAY_SIZE(omap_uart_latency), false);
+ NULL, 0, false);
WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
name, oh->name);
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index eba9f9a8ab6..9f43fcc05d3 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -31,14 +31,6 @@
static bool sr_enable_on_init;
-static struct omap_device_pm_latency omap_sr_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST
- },
-};
-
/* Read EFUSE values from control registers for OMAP3430 */
static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
struct omap_sr_data *sr_data)
@@ -121,8 +113,7 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
sr_data->enable_on_init = sr_enable_on_init;
pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
- omap_sr_latency,
- ARRAY_SIZE(omap_sr_latency), 0);
+ NULL, 0, 0);
if (IS_ERR(pdev))
pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
__func__, name, oh->name);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 1140e98c977..e49fc7be222 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -434,7 +434,7 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
int ret = 0;
char *name = "omap_timer";
struct dmtimer_platform_data *pdata;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_timer_capability_dev_attr *timer_dev_attr;
struct powerdomain *pwrdm;
@@ -476,12 +476,12 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
#ifdef CONFIG_PM
pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
#endif
- od = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
+ pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
omap2_dmtimer_latency,
ARRAY_SIZE(omap2_dmtimer_latency),
0);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s: %s.\n",
__func__, name, oh->name);
ret = -EINVAL;
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 19e4dac62a8..47fb5d60763 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -60,14 +60,6 @@ static struct musb_hdrc_platform_data musb_plat = {
static u64 musb_dmamask = DMA_BIT_MASK(32);
-static struct omap_device_pm_latency omap_musb_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
{
switch (board_data->interface_type) {
@@ -115,7 +107,6 @@ static struct omap_musb_board_data musb_default_board_data = {
void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
{
struct omap_hwmod *oh;
- struct omap_device *od;
struct platform_device *pdev;
struct device *dev;
int bus_id = -1;
@@ -145,22 +136,19 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
name = "musb-omap2430";
}
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return;
- }
+ oh = omap_hwmod_lookup(oh_name);
+ if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
+ __func__, oh_name))
+ return;
- od = omap_device_build(name, bus_id, oh, &musb_plat,
- sizeof(musb_plat), omap_musb_latency,
- ARRAY_SIZE(omap_musb_latency), false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(name, bus_id, oh, &musb_plat,
+ sizeof(musb_plat), NULL, 0, false);
+ if (IS_ERR(pdev)) {
pr_err("Could not build omap_device for %s %s\n",
name, oh_name);
return;
}
- pdev = &od->pdev;
dev = &pdev->dev;
get_device(dev);
dev->dma_mask = &musb_dmamask;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a162b2c2ae1..679cbd49c01 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -139,14 +139,6 @@ static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
omap_pm_set_max_mpu_wakeup_lat(dev, t);
}
-static struct omap_device_pm_latency omap_i2c_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline int omap2_i2c_add_bus(int bus_id)
{
int l;
@@ -189,7 +181,7 @@ static inline int omap2_i2c_add_bus(int bus_id)
pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
pdev = omap_device_build(name, bus_id, oh, pdata,
sizeof(struct omap_i2c_bus_platform_data),
- omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0);
+ NULL, 0, 0);
WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
return PTR_ERR(pdev);
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index abda2c7e499..c50df4814f6 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -50,10 +50,13 @@ void omap2430_init_early(void);
void omap3430_init_early(void);
void omap35xx_init_early(void);
void omap3630_init_early(void);
+void omap3_init_early(void); /* Do not use this one */
void am35xx_init_early(void);
void ti816x_init_early(void);
void omap4430_init_early(void);
+void omap_sram_init(void);
+
/*
* IO bases for various OMAP processors
* Except the tap base, rest all the io bases
@@ -62,13 +65,13 @@ void omap4430_init_early(void);
struct omap_globals {
u32 class; /* OMAP class to detect */
void __iomem *tap; /* Control module ID code */
- unsigned long sdrc; /* SDRAM Controller */
- unsigned long sms; /* SDRAM Memory Scheduler */
- unsigned long ctrl; /* System Control Module */
- unsigned long ctrl_pad; /* PAD Control Module */
- unsigned long prm; /* Power and Reset Management */
- unsigned long cm; /* Clock Management */
- unsigned long cm2;
+ void __iomem *sdrc; /* SDRAM Controller */
+ void __iomem *sms; /* SDRAM Memory Scheduler */
+ void __iomem *ctrl; /* System Control Module */
+ void __iomem *ctrl_pad; /* PAD Control Module */
+ void __iomem *prm; /* Power and Reset Management */
+ void __iomem *cm; /* Clock Management */
+ void __iomem *cm2;
};
void omap2_set_globals_242x(void);
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index a93a00db93d..7f2969eadb8 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -228,13 +228,13 @@
#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE
/* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
#define OMAP44XX_EMIF2_SIZE SZ_1M
+#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE
/* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
#define OMAP44XX_DMM_SIZE SZ_1M
+#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
/*
* ----------------------------------------------------------------------------
* Omap specific register access
@@ -247,6 +247,8 @@
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
+void omap_ioremap_init(void);
+
extern u8 omap_readb(u32 pa);
extern u16 omap_readw(u32 pa);
extern u32 omap_readl(u32 pa);
@@ -256,8 +258,31 @@ extern void omap_writel(u32 v, u32 pa);
struct omap_sdrc_params;
-extern void omap1_map_common_io(void);
-extern void omap1_init_common_hw(void);
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+void omap7xx_map_io(void);
+#else
+static inline void omap_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void omap15xx_map_io(void);
+#else
+static inline void omap15xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+void omap16xx_map_io(void);
+#else
+static inline void omap16xx_map_io(void)
+{
+}
+#endif
+
+void omap1_init_early(void);
#ifdef CONFIG_SOC_OMAP2420
extern void omap242x_map_common_io(void);
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index d4d9b96f961..12c5b0c345b 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -101,6 +101,7 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
int pm_lats_cnt, int is_early_device);
void __iomem *omap_device_get_rt_va(struct omap_device *od);
+struct device *omap_device_get_by_hwmod_name(const char *oh_name);
/* OMAP PM interface */
int omap_device_align_pm_lat(struct platform_device *pdev,
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index e9b0e23edd0..333871f5999 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -24,11 +24,16 @@
#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst)))
+static int initialized;
+
/*
* Intercept ioremap() requests for addresses in our fixed mapping regions.
*/
void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
{
+
+ WARN(!initialized, "Do not use ioremap before init_early\n");
+
#ifdef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap1()) {
if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
@@ -147,3 +152,8 @@ void __init omap_init_consistent_dma_size(void)
init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
#endif
}
+
+void __init omap_ioremap_init(void)
+{
+ initialized++;
+}
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 26aee5cc1fc..cd90bedd930 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -85,6 +85,8 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/notifier.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
@@ -96,6 +98,20 @@
static int omap_device_register(struct platform_device *pdev);
static int omap_early_device_register(struct platform_device *pdev);
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt);
+static void omap_device_delete(struct omap_device *od);
+
+
+static struct omap_device_pm_latency omap_default_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ }
+};
/* Private functions */
@@ -303,6 +319,96 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od,
}
+static struct dev_pm_domain omap_device_pm_domain;
+
+/**
+ * omap_device_build_from_dt - build an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
+ *
+ * Function for building an omap_device already registered from device-tree
+ *
+ * Returns 0 or PTR_ERR() on error.
+ */
+static int omap_device_build_from_dt(struct platform_device *pdev)
+{
+ struct omap_hwmod **hwmods;
+ struct omap_device *od;
+ struct omap_hwmod *oh;
+ struct device_node *node = pdev->dev.of_node;
+ const char *oh_name;
+ int oh_cnt, i, ret = 0;
+
+ oh_cnt = of_property_count_strings(node, "ti,hwmods");
+ if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
+ dev_warn(&pdev->dev, "No 'hwmods' to build omap_device\n");
+ return -ENODEV;
+ }
+
+ hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods) {
+ ret = -ENOMEM;
+ goto odbfd_exit;
+ }
+
+ for (i = 0; i < oh_cnt; i++) {
+ of_property_read_string_index(node, "ti,hwmods", i, &oh_name);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n",
+ oh_name);
+ ret = -EINVAL;
+ goto odbfd_exit1;
+ }
+ hwmods[i] = oh;
+ }
+
+ od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0);
+ if (!od) {
+ dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
+ oh_name);
+ ret = PTR_ERR(od);
+ goto odbfd_exit1;
+ }
+
+ if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
+ omap_device_disable_idle_on_suspend(pdev);
+
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+
+odbfd_exit1:
+ kfree(hwmods);
+odbfd_exit:
+ return ret;
+}
+
+static int _omap_device_notifier_call(struct notifier_block *nb,
+ unsigned long event, void *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ switch (event) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (pdev->dev.of_node)
+ omap_device_build_from_dt(pdev);
+ break;
+
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (pdev->archdata.od)
+ omap_device_delete(pdev->archdata.od);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+
/* Public functions for use by core code */
/**
@@ -389,6 +495,113 @@ static int omap_device_fill_resources(struct omap_device *od,
}
/**
+ * omap_device_alloc - allocate an omap_device
+ * @pdev: platform_device that will be included in this omap_device
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for allocating an omap_device structure and filling
+ * hwmods, resources and pm_latency attributes.
+ *
+ * Returns an struct omap_device pointer or ERR_PTR() on error;
+ */
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt)
+{
+ int ret = -ENOMEM;
+ struct omap_device *od;
+ struct resource *res = NULL;
+ int i, res_count;
+ struct omap_hwmod **hwmods;
+
+ od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+ if (!od) {
+ ret = -ENOMEM;
+ goto oda_exit1;
+ }
+ od->hwmods_cnt = oh_cnt;
+
+ hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods)
+ goto oda_exit2;
+
+ od->hwmods = hwmods;
+ od->pdev = pdev;
+
+ /*
+ * HACK: Ideally the resources from DT should match, and hwmod
+ * should just add the missing ones. Since the name is not
+ * properly populated by DT, stick to hwmod resources only.
+ */
+ if (pdev->num_resources && pdev->resource)
+ dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
+ __func__, pdev->num_resources);
+
+ res_count = omap_device_count_resources(od);
+ if (res_count > 0) {
+ dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
+ __func__, res_count);
+ res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+ if (!res)
+ goto oda_exit3;
+
+ omap_device_fill_resources(od, res);
+
+ ret = platform_device_add_resources(pdev, res, res_count);
+ kfree(res);
+
+ if (ret)
+ goto oda_exit3;
+ }
+
+ if (!pm_lats) {
+ pm_lats = omap_default_latency;
+ pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
+ }
+
+ od->pm_lats_cnt = pm_lats_cnt;
+ od->pm_lats = kmemdup(pm_lats,
+ sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
+ GFP_KERNEL);
+ if (!od->pm_lats)
+ goto oda_exit3;
+
+ pdev->archdata.od = od;
+
+ for (i = 0; i < oh_cnt; i++) {
+ hwmods[i]->od = od;
+ _add_hwmod_clocks_clkdev(od, hwmods[i]);
+ }
+
+ return od;
+
+oda_exit3:
+ kfree(hwmods);
+oda_exit2:
+ kfree(od);
+oda_exit1:
+ dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret);
+
+ return ERR_PTR(ret);
+}
+
+static void omap_device_delete(struct omap_device *od)
+{
+ if (!od)
+ return;
+
+ od->pdev->archdata.od = NULL;
+ kfree(od->pm_lats);
+ kfree(od->hwmods);
+ kfree(od);
+}
+
+/**
* omap_device_build - build and register an omap_device with one omap_hwmod
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
@@ -447,9 +660,6 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
int ret = -ENOMEM;
struct platform_device *pdev;
struct omap_device *od;
- struct resource *res = NULL;
- int i, res_count;
- struct omap_hwmod **hwmods;
if (!ohs || oh_cnt == 0 || !pdev_name)
return ERR_PTR(-EINVAL);
@@ -463,67 +673,31 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
goto odbs_exit;
}
- pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
- oh_cnt);
+ /* Set the dev_name early to allow dev_xxx in omap_device_alloc */
+ if (pdev->id != -1)
+ dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+ else
+ dev_set_name(&pdev->dev, "%s", pdev->name);
- od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
- if (!od) {
- ret = -ENOMEM;
+ od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
+ if (!od)
goto odbs_exit1;
- }
- od->hwmods_cnt = oh_cnt;
-
- hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
- GFP_KERNEL);
- if (!hwmods)
- goto odbs_exit2;
-
- memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
- od->hwmods = hwmods;
- od->pdev = pdev;
-
- res_count = omap_device_count_resources(od);
- if (res_count > 0) {
- res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
- if (!res)
- goto odbs_exit3;
-
- omap_device_fill_resources(od, res);
-
- ret = platform_device_add_resources(pdev, res, res_count);
- kfree(res);
-
- if (ret)
- goto odbs_exit3;
- }
ret = platform_device_add_data(pdev, pdata, pdata_len);
if (ret)
- goto odbs_exit3;
-
- pdev->archdata.od = od;
+ goto odbs_exit2;
if (is_early_device)
ret = omap_early_device_register(pdev);
else
ret = omap_device_register(pdev);
if (ret)
- goto odbs_exit3;
-
- od->pm_lats = pm_lats;
- od->pm_lats_cnt = pm_lats_cnt;
-
- for (i = 0; i < oh_cnt; i++) {
- hwmods[i]->od = od;
- _add_hwmod_clocks_clkdev(od, hwmods[i]);
- }
+ goto odbs_exit2;
return pdev;
-odbs_exit3:
- kfree(hwmods);
odbs_exit2:
- kfree(od);
+ omap_device_delete(od);
odbs_exit1:
platform_device_put(pdev);
odbs_exit:
@@ -844,6 +1018,42 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od)
return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
}
+/**
+ * omap_device_get_by_hwmod_name() - convert a hwmod name to
+ * device pointer.
+ * @oh_name: name of the hwmod device
+ *
+ * Returns back a struct device * pointer associated with a hwmod
+ * device represented by a hwmod_name
+ */
+struct device *omap_device_get_by_hwmod_name(const char *oh_name)
+{
+ struct omap_hwmod *oh;
+
+ if (!oh_name) {
+ WARN(1, "%s: no hwmod name!\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (IS_ERR_OR_NULL(oh)) {
+ WARN(1, "%s: no hwmod for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
+ }
+ if (IS_ERR_OR_NULL(oh->od)) {
+ WARN(1, "%s: no omap_device for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
+ }
+
+ if (IS_ERR_OR_NULL(oh->od->pdev))
+ return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
+
+ return &oh->od->pdev->dev;
+}
+EXPORT_SYMBOL(omap_device_get_by_hwmod_name);
+
/*
* Public functions intended for use in omap_device_pm_latency
* .activate_func and .deactivate_func function pointers
@@ -924,8 +1134,13 @@ struct device omap_device_parent = {
.parent = &platform_bus,
};
+static struct notifier_block platform_nb = {
+ .notifier_call = _omap_device_notifier_call,
+};
+
static int __init omap_device_init(void)
{
+ bus_register_notifier(&platform_bus_type, &platform_nb);
return device_register(&omap_device_parent);
}
core_initcall(omap_device_init);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 363c91e44ef..8b28664d1c6 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/omapfb.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
@@ -29,10 +28,8 @@
#include <plat/sram.h>
#include <plat/board.h>
#include <plat/cpu.h>
-#include <plat/vram.h>
#include "sram.h"
-#include "fb.h"
/* XXX These "sideways" includes are a sign that something is wrong */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
@@ -41,16 +38,9 @@
#endif
#define OMAP1_SRAM_PA 0x20000000
-#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
-#define OMAP2_SRAM_VA 0xfe400000
-#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
-#define OMAP3_SRAM_VA 0xfe400000
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
-#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_VA 0xfe400000
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
-#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
#if defined(CONFIG_ARCH_OMAP2PLUS)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -73,9 +63,9 @@
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
static unsigned long omap_sram_start;
-static unsigned long omap_sram_base;
+static void __iomem *omap_sram_base;
static unsigned long omap_sram_size;
-static unsigned long omap_sram_ceil;
+static void __iomem *omap_sram_ceil;
/*
* Depending on the target RAMFS firewall setup, the public usable amount of
@@ -112,12 +102,9 @@ static int is_sram_locked(void)
*/
static void __init omap_detect_sram(void)
{
- unsigned long reserved;
-
if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
- omap_sram_base = OMAP3_SRAM_PUB_VA;
omap_sram_start = OMAP3_SRAM_PUB_PA;
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
@@ -126,25 +113,20 @@ static void __init omap_detect_sram(void)
omap_sram_size = 0x8000; /* 32K */
}
} else if (cpu_is_omap44xx()) {
- omap_sram_base = OMAP4_SRAM_PUB_VA;
omap_sram_start = OMAP4_SRAM_PUB_PA;
omap_sram_size = 0xa000; /* 40K */
} else {
- omap_sram_base = OMAP2_SRAM_PUB_VA;
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
if (cpu_is_omap34xx()) {
- omap_sram_base = OMAP3_SRAM_VA;
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap44xx()) {
- omap_sram_base = OMAP4_SRAM_VA;
omap_sram_start = OMAP4_SRAM_PA;
omap_sram_size = 0xe000; /* 56K */
} else {
- omap_sram_base = OMAP2_SRAM_VA;
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
omap_sram_size = 0xa0000; /* 640K */
@@ -153,7 +135,6 @@ static void __init omap_detect_sram(void)
}
}
} else {
- omap_sram_base = OMAP1_SRAM_VA;
omap_sram_start = OMAP1_SRAM_PA;
if (cpu_is_omap7xx())
@@ -170,35 +151,14 @@ static void __init omap_detect_sram(void)
omap_sram_size = 0x4000;
}
}
- reserved = omapfb_reserve_sram(omap_sram_start, omap_sram_base,
- omap_sram_size,
- omap_sram_start + SRAM_BOOTLOADER_SZ,
- omap_sram_size - SRAM_BOOTLOADER_SZ);
- omap_sram_size -= reserved;
-
- reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base,
- omap_sram_size,
- omap_sram_start + SRAM_BOOTLOADER_SZ,
- omap_sram_size - SRAM_BOOTLOADER_SZ);
- omap_sram_size -= reserved;
-
- omap_sram_ceil = omap_sram_base + omap_sram_size;
}
-static struct map_desc omap_sram_io_desc[] __initdata = {
- { /* .length gets filled in at runtime */
- .virtual = OMAP1_SRAM_VA,
- .pfn = __phys_to_pfn(OMAP1_SRAM_PA),
- .type = MT_MEMORY
- }
-};
-
/*
* Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
*/
static void __init omap_map_sram(void)
{
- unsigned long base;
+ int cached = 1;
if (omap_sram_size == 0)
return;
@@ -211,28 +171,18 @@ static void __init omap_map_sram(void)
* the ARM may attempt to write cache lines back to SDRAM
* which will cause the system to hang.
*/
- omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
+ cached = 0;
}
- omap_sram_io_desc[0].virtual = omap_sram_base;
- base = omap_sram_start;
- base = ROUND_DOWN(base, PAGE_SIZE);
- omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
- omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
- iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
-
- pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n",
- (long long) __pfn_to_phys(omap_sram_io_desc[0].pfn),
- omap_sram_io_desc[0].virtual,
- omap_sram_io_desc[0].length);
+ omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
+ omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
+ cached);
+ if (!omap_sram_base) {
+ pr_err("SRAM: Could not map\n");
+ return;
+ }
- /*
- * Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but since we're called from map_io(), we
- * must do it here.
- */
- local_flush_tlb_all();
- flush_cache_all();
+ omap_sram_ceil = omap_sram_base + omap_sram_size;
/*
* Looks like we need to preserve some bootloader code at the
@@ -251,13 +201,18 @@ static void __init omap_map_sram(void)
*/
void *omap_sram_push_address(unsigned long size)
{
- if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
+ unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
+
+ available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+
+ if (size > available) {
pr_err("Not enough space in SRAM\n");
return NULL;
}
- omap_sram_ceil -= size;
- omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
+ new_ceil -= size;
+ new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
+ omap_sram_ceil = IOMEM(new_ceil);
return (void *)omap_sram_ceil;
}
diff --git a/drivers/of/base.c b/drivers/of/base.c
index b970562e011..9b6588ef067 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -716,6 +716,90 @@ int of_property_read_string(struct device_node *np, const char *propname,
EXPORT_SYMBOL_GPL(of_property_read_string);
/**
+ * of_property_read_string_index - Find and read a string from a multiple
+ * strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the string in the list of strings
+ * @out_string: pointer to null terminated return string, modified only if
+ * return value is 0.
+ *
+ * Search for a property in a device tree node and retrieve a null
+ * terminated string value (pointer to data, not a copy) in the list of strings
+ * contained in that property.
+ * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
+ * property does not have a value, and -EILSEQ if the string is not
+ * null-terminated within the length of the property data.
+ *
+ * The out_string pointer is modified only if a valid string can be decoded.
+ */
+int of_property_read_string_index(struct device_node *np, const char *propname,
+ int index, const char **output)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ int i = 0;
+ size_t l = 0, total = 0;
+ const char *p;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return -EILSEQ;
+
+ p = prop->value;
+
+ for (i = 0; total < prop->length; total += l, p += l) {
+ l = strlen(p) + 1;
+ if ((*p != 0) && (i++ == index)) {
+ *output = p;
+ return 0;
+ }
+ }
+ return -ENODATA;
+}
+EXPORT_SYMBOL_GPL(of_property_read_string_index);
+
+
+/**
+ * of_property_count_strings - Find and return the number of strings from a
+ * multiple strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ *
+ * Search for a property in a device tree node and retrieve the number of null
+ * terminated string contain in it. Returns the number of strings on
+ * success, -EINVAL if the property does not exist, -ENODATA if property
+ * does not have a value, and -EILSEQ if the string is not null-terminated
+ * within the length of the property data.
+ */
+int of_property_count_strings(struct device_node *np, const char *propname)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ int i = 0;
+ size_t l = 0, total = 0;
+ const char *p;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return -EILSEQ;
+
+ p = prop->value;
+
+ for (i = 0; total < prop->length; total += l, p += l) {
+ l = strlen(p) + 1;
+ if (*p != 0)
+ i++;
+ }
+ return i;
+}
+EXPORT_SYMBOL_GPL(of_property_count_strings);
+
+/**
* of_parse_phandle - Resolve a phandle property to a device_node pointer
* @np: Pointer to device node holding phandle property
* @phandle_name: Name of property holding a phandle value
diff --git a/include/linux/of.h b/include/linux/of.h
index 5dbe263462a..f01ba8a209c 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -207,6 +207,11 @@ extern int of_property_read_u64(const struct device_node *np,
extern int of_property_read_string(struct device_node *np,
const char *propname,
const char **out_string);
+extern int of_property_read_string_index(struct device_node *np,
+ const char *propname,
+ int index, const char **output);
+extern int of_property_count_strings(struct device_node *np,
+ const char *propname);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
extern int of_device_is_available(const struct device_node *device);
@@ -283,6 +288,19 @@ static inline int of_property_read_string(struct device_node *np,
return -ENOSYS;
}
+static inline int of_property_read_string_index(struct device_node *np,
+ const char *propname, int index,
+ const char **out_string)
+{
+ return -ENOSYS;
+}
+
+static inline int of_property_count_strings(struct device_node *np,
+ const char *propname)
+{
+ return -ENOSYS;
+}
+
static inline const void *of_get_property(const struct device_node *node,
const char *name,
int *lenp)