aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rwxr-xr-xDocumentation/devicetree/bindings/mfd/tps6507x.txt91
-rw-r--r--Documentation/devicetree/bindings/regulator/anatop-regulator.txt8
-rw-r--r--Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt152
-rw-r--r--Documentation/devicetree/bindings/regulator/tps51632-regulator.txt27
-rw-r--r--drivers/mfd/sec-core.c75
-rw-r--r--drivers/regulator/88pm8607.c40
-rw-r--r--drivers/regulator/Kconfig10
-rw-r--r--drivers/regulator/Makefile1
-rw-r--r--drivers/regulator/anatop-regulator.c41
-rw-r--r--drivers/regulator/arizona-micsupp.c78
-rw-r--r--drivers/regulator/as3711-regulator.c2
-rw-r--r--drivers/regulator/core.c43
-rw-r--r--drivers/regulator/da9052-regulator.c46
-rw-r--r--drivers/regulator/da9055-regulator.c3
-rw-r--r--drivers/regulator/gpio-regulator.c7
-rw-r--r--drivers/regulator/lp3971.c22
-rw-r--r--drivers/regulator/lp3972.c22
-rw-r--r--drivers/regulator/lp872x.c36
-rw-r--r--drivers/regulator/lp8755.c566
-rw-r--r--drivers/regulator/lp8788-buck.c41
-rw-r--r--drivers/regulator/lp8788-ldo.c133
-rw-r--r--drivers/regulator/max77686.c14
-rw-r--r--drivers/regulator/max8907-regulator.c7
-rw-r--r--drivers/regulator/max8925-regulator.c3
-rw-r--r--drivers/regulator/max8997.c89
-rw-r--r--drivers/regulator/max8998.c14
-rw-r--r--drivers/regulator/mc13892-regulator.c111
-rw-r--r--drivers/regulator/mc13xxx-regulator-core.c25
-rw-r--r--drivers/regulator/mc13xxx.h4
-rw-r--r--drivers/regulator/palmas-regulator.c7
-rw-r--r--drivers/regulator/s5m8767.c268
-rw-r--r--drivers/regulator/tps51632-regulator.c152
-rw-r--r--drivers/regulator/tps6507x-regulator.c92
-rw-r--r--drivers/regulator/tps65090-regulator.c106
-rw-r--r--drivers/regulator/tps6586x-regulator.c54
-rw-r--r--drivers/regulator/tps65910-regulator.c6
-rw-r--r--include/linux/mfd/samsung/core.h11
-rw-r--r--include/linux/platform_data/lp8755.h71
-rw-r--r--include/linux/regulator/driver.h6
-rw-r--r--sound/soc/codecs/wm5102.c4
-rw-r--r--sound/soc/codecs/wm5110.c4
41 files changed, 1923 insertions, 569 deletions
diff --git a/Documentation/devicetree/bindings/mfd/tps6507x.txt b/Documentation/devicetree/bindings/mfd/tps6507x.txt
new file mode 100755
index 00000000000..8fffa3c5ed4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps6507x.txt
@@ -0,0 +1,91 @@
+TPS6507x Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps6507x"
+- reg: I2C slave address
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Not all regulators for the
+ given device need to be present. The definition for each of these nodes
+ is defined using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+ The regulator is matched with the regulator-compatible.
+
+ The valid regulator-compatible values are:
+ tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2
+- xxx-supply: Input voltage supply regulator.
+ These entries are required if regulators are enabled for a device.
+ Missing of these properties can cause the regulator registration
+ fails.
+ If some of input supply is powered through battery or always-on
+ supply then also it is require to have these parameters with proper
+ node handle of always on power supply.
+ tps6507x:
+ vindcdc1_2-supply: VDCDC1 and VDCDC2 input.
+ vindcdc3-supply : VDCDC3 input.
+ vldo1_2-supply : VLDO1 and VLDO2 input.
+
+Regulator Optional properties:
+- defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
+ 0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND.
+ 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH.
+ If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+ pmu: tps6507x@48 {
+ compatible = "ti,tps6507x";
+ reg = <0x48>;
+
+ vindcdc1_2-supply = <&vbat>;
+ vindcdc3-supply = <...>;
+ vinldo1_2-supply = <...>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdcdc1_reg: regulator@0 {
+ regulator-compatible = "VDCDC1";
+ reg = <0>;
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ vdcdc2_reg: regulator@1 {
+ regulator-compatible = "VDCDC2";
+ reg = <1>;
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ defdcdc_default = <1>;
+ };
+ vdcdc3_reg: regulator@2 {
+ regulator-compatible = "VDCDC3";
+ reg = <2>;
+ regulator-min-microvolt = <950000>
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ defdcdc_default = <1>;
+ };
+ ldo1_reg: regulator@3 {
+ regulator-compatible = "LDO1";
+ reg = <3>;
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ldo2_reg: regulator@4 {
+ regulator-compatible = "LDO2";
+ reg = <4>;
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+
+ };
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
index 357758cb6e9..758eae24082 100644
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
@@ -9,6 +9,11 @@ Required properties:
- anatop-min-voltage: Minimum voltage of this regulator
- anatop-max-voltage: Maximum voltage of this regulator
+Optional properties:
+- anatop-delay-reg-offset: Anatop MFD step time register offset
+- anatop-delay-bit-shift: Bit shift for the step time register
+- anatop-delay-bit-width: Number of bits used in the step time register
+
Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
@@ -23,6 +28,9 @@ Example:
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <24>;
+ anatop-delay-bit-width = <2>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1300000>;
diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
new file mode 100644
index 00000000000..a35ff99003a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
@@ -0,0 +1,152 @@
+* Samsung S5M8767 Voltage and Current Regulator
+
+The Samsung S5M8767 is a multi-function device which includes volatage and
+current regulators, rtc, charger controller and other sub-blocks. It is
+interfaced to the host controller using a i2c interface. Each sub-block is
+addressed by the host system using different i2c slave address. This document
+describes the bindings for 'pmic' sub-block of s5m8767.
+
+Required properties:
+- compatible: Should be "samsung,s5m8767-pmic".
+- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
+
+- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck2 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck3 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck4 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+ for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
+ property should specify atleast one voltage level (which would be a
+ safe operating voltage).
+
+ If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, then all the eight voltage values for the
+ 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from s5m8767 are delivered to.
+- interrupts: Interrupt specifiers for two interrupt sources.
+ - First interrupt specifier is for 'irq1' interrupt.
+ - Second interrupt specifier is for 'alert' interrupt.
+- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
+- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
+- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
+
+Additional properties required if either of the optional properties are used:
+
+- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ the possible 8 options selectable by the dvs gpios. The value of this
+ property should be between 0 and 7. If not specified or if out of range, the
+ default value of this property is set to 0.
+
+- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
+ for dvs. The format of the gpio specifier depends in the gpio controller.
+
+Regulators: The regulators of s5m8767 that have to be instantiated should be
+included in a sub-node named 'regulators'. Regulator nodes included in this
+sub-node should be of the format as listed below.
+
+ regulator_name {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+ };
+The above regulator entries are defined in regulator bindings documentation
+except op_mode description.
+ - op_mode: describes the different operating modes of the LDO's with
+ power mode change in SOC. The different possible values are,
+ 0 - always off mode
+ 1 - on in normal mode
+ 2 - low power mode
+ 3 - suspend mode
+
+The following are the names of the regulators that the s5m8767 pmic block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of s5m8767.
+
+ - LDOn
+ - valid values for n are 1 to 28
+ - Example: LDO0, LD01, LDO28
+ - BUCKn
+ - valid values for n are 1 to 9.
+ - Example: BUCK1, BUCK2, BUCK9
+
+The bindings inside the regulator nodes use the standard regulator bindings
+which are documented elsewhere.
+
+Example:
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck2-uses-gpio-dvs;
+ s5m8767,pmic-buck3-uses-gpio-dvs;
+ s5m8767,pmic-buck4-uses-gpio-dvs;
+
+ s5m8767,pmic-buck-default-dvs-idx = <0>;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 1 0 0>, /* DVS1 */
+ <&gpx0 1 1 0 0>, /* DVS2 */
+ <&gpx0 2 1 0 0>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>, /* SET1 */
+ <&gpx2 4 1 0 0>, /* SET2 */
+ <&gpx2 5 1 0 0>; /* SET3 */
+
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ABB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt
new file mode 100644
index 00000000000..2f7e44a9641
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt
@@ -0,0 +1,27 @@
+TPS51632 Voltage regulators
+
+Required properties:
+- compatible: Must be "ti,tps51632"
+- reg: I2C slave address
+
+Optional properties:
+- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface.
+- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this
+ will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage
+ step is 10mV as per datasheet.
+
+Any property defined as part of the core regulator binding, defined in
+regulator.txt, can also be used.
+
+Example:
+
+ tps51632 {
+ compatible = "ti,tps51632";
+ reg = <0x43>;
+ regulator-name = "tps51632-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ ti,enable-pwm-dvfs;
+ ti,dvfs-step-20mV;
+ };
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 49d361a618d..77ee26ef594 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/of_irq.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <linux/mutex.h>
@@ -60,6 +61,15 @@ static struct mfd_cell s2mps11_devs[] = {
},
};
+#ifdef CONFIG_OF
+static struct of_device_id sec_dt_match[] = {
+ { .compatible = "samsung,s5m8767-pmic",
+ .data = (void *)S5M8767X,
+ },
+ {},
+};
+#endif
+
int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest)
{
return regmap_read(sec_pmic->regmap, reg, dest);
@@ -95,6 +105,57 @@ static struct regmap_config sec_regmap_config = {
.val_bits = 8,
};
+
+#ifdef CONFIG_OF
+/*
+ * Only the common platform data elements for s5m8767 are parsed here from the
+ * device tree. Other sub-modules of s5m8767 such as pmic, rtc , charger and
+ * others have to parse their own platform data elements from device tree.
+ *
+ * The s5m8767 platform data structure is instantiated here and the drivers for
+ * the sub-modules need not instantiate another instance while parsing their
+ * platform data.
+ */
+static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
+ struct device *dev)
+{
+ struct sec_platform_data *pd;
+
+ pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd) {
+ dev_err(dev, "could not allocate memory for pdata\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /*
+ * ToDo: the 'wakeup' member in the platform data is more of a linux
+ * specfic information. Hence, there is no binding for that yet and
+ * not parsed here.
+ */
+
+ return pd;
+}
+#else
+static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
+ struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static inline int sec_i2c_get_driver_data(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+#ifdef CONFIG_OF
+ if (i2c->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(sec_dt_match, i2c->dev.of_node);
+ return (int)match->data;
+ }
+#endif
+ return (int)id->driver_data;
+}
+
static int sec_pmic_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -111,13 +172,22 @@ static int sec_pmic_probe(struct i2c_client *i2c,
sec_pmic->dev = &i2c->dev;
sec_pmic->i2c = i2c;
sec_pmic->irq = i2c->irq;
- sec_pmic->type = id->driver_data;
-
+ sec_pmic->type = sec_i2c_get_driver_data(i2c, id);
+
+ if (sec_pmic->dev->of_node) {
+ pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev);
+ if (IS_ERR(pdata)) {
+ ret = PTR_ERR(pdata);
+ return ret;
+ }
+ pdata->device_type = sec_pmic->type;
+ }
if (pdata) {
sec_pmic->device_type = pdata->device_type;
sec_pmic->ono = pdata->ono;
sec_pmic->irq_base = pdata->irq_base;
sec_pmic->wakeup = pdata->wakeup;
+ sec_pmic->pdata = pdata;
}
sec_pmic->regmap = devm_regmap_init_i2c(i2c, &sec_regmap_config);
@@ -192,6 +262,7 @@ static struct i2c_driver sec_pmic_driver = {
.driver = {
.name = "sec_pmic",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(sec_dt_match),
},
.probe = sec_pmic_probe,
.remove = sec_pmic_remove,
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index 2b557119ada..c79ab843333 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -30,8 +30,6 @@ struct pm8607_regulator_info {
unsigned int *vol_table;
unsigned int *vol_suspend;
- int update_reg;
- int update_bit;
int slope_double;
};
@@ -222,29 +220,6 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
return ret;
}
-static int pm8607_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
-{
- struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
- uint8_t val;
- int ret;
-
- val = (uint8_t)(selector << (ffs(rdev->desc->vsel_mask) - 1));
-
- ret = pm860x_set_bits(info->i2c, rdev->desc->vsel_reg,
- rdev->desc->vsel_mask, val);
- if (ret)
- return ret;
- switch (info->desc.id) {
- case PM8607_ID_BUCK1:
- case PM8607_ID_BUCK3:
- ret = pm860x_set_bits(info->i2c, info->update_reg,
- 1 << info->update_bit,
- 1 << info->update_bit);
- break;
- }
- return ret;
-}
-
static int pm8606_preg_enable(struct regulator_dev *rdev)
{
struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
@@ -276,7 +251,7 @@ static int pm8606_preg_is_enabled(struct regulator_dev *rdev)
static struct regulator_ops pm8607_regulator_ops = {
.list_voltage = pm8607_list_voltage,
- .set_voltage_sel = pm8607_set_voltage_sel,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -313,11 +288,11 @@ static struct regulator_ops pm8606_preg_ops = {
.n_voltages = ARRAY_SIZE(vreg##_table), \
.vsel_reg = PM8607_##vreg, \
.vsel_mask = ARRAY_SIZE(vreg##_table) - 1, \
+ .apply_reg = PM8607_##ureg, \
+ .apply_bit = (ubit), \
.enable_reg = PM8607_##ereg, \
.enable_mask = 1 << (ebit), \
}, \
- .update_reg = PM8607_##ureg, \
- .update_bit = (ubit), \
.slope_double = (0), \
.vol_table = (unsigned int *)&vreg##_table, \
.vol_suspend = (unsigned int *)&vreg##_suspend_table, \
@@ -343,9 +318,9 @@ static struct regulator_ops pm8606_preg_ops = {
}
static struct pm8607_regulator_info pm8607_regulator_info[] = {
- PM8607_DVC(BUCK1, GO, 0, SUPPLIES_EN11, 0),
- PM8607_DVC(BUCK2, GO, 1, SUPPLIES_EN11, 1),
- PM8607_DVC(BUCK3, GO, 2, SUPPLIES_EN11, 2),
+ PM8607_DVC(BUCK1, GO, BIT(0), SUPPLIES_EN11, 0),
+ PM8607_DVC(BUCK2, GO, BIT(1), SUPPLIES_EN11, 1),
+ PM8607_DVC(BUCK3, GO, BIT(2), SUPPLIES_EN11, 2),
PM8607_LDO(1, LDO1, 0, SUPPLIES_EN11, 3),
PM8607_LDO(2, LDO2, 0, SUPPLIES_EN11, 4),
@@ -372,7 +347,7 @@ static int pm8607_regulator_dt_init(struct platform_device *pdev,
struct regulator_config *config)
{
struct device_node *nproot, *np;
- nproot = pdev->dev.parent->of_node;
+ nproot = of_node_get(pdev->dev.parent->of_node);
if (!nproot)
return -ENODEV;
nproot = of_find_node_by_name(nproot, "regulators");
@@ -388,6 +363,7 @@ static int pm8607_regulator_dt_init(struct platform_device *pdev,
break;
}
}
+ of_node_put(nproot);
return 0;
}
#else
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 551a22b0753..a5d97eaee99 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -91,6 +91,7 @@ config REGULATOR_AAT2870
config REGULATOR_ARIZONA
tristate "Wolfson Arizona class devices"
depends on MFD_ARIZONA
+ depends on SND_SOC
help
Support for the regulators found on Wolfson Arizona class
devices.
@@ -277,6 +278,15 @@ config REGULATOR_LP872X
help
This driver supports LP8720/LP8725 PMIC
+config REGULATOR_LP8755
+ tristate "TI LP8755 High Performance PMU driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver supports LP8755 High Performance PMU driver. This
+ chip contains six step-down DC/DC converters which can support
+ 9 mode multiphase configuration.
+
config REGULATOR_LP8788
bool "TI LP8788 Power Regulators"
depends on MFD_LP8788
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index b802b0c7fb0..6e8250382de 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
+obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 8f39cac661d..0d4a8ccbb53 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -31,12 +31,18 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
+#define LDO_RAMP_UP_UNIT_IN_CYCLES 64 /* 64 cycles per step */
+#define LDO_RAMP_UP_FREQ_IN_MHZ 24 /* cycle based on 24M OSC */
+
struct anatop_regulator {
const char *name;
u32 control_reg;
struct regmap *anatop;
int vol_bit_shift;
int vol_bit_width;
+ u32 delay_reg;
+ int delay_bit_shift;
+ int delay_bit_width;
int min_bit_val;
int min_voltage;
int max_voltage;
@@ -55,6 +61,32 @@ static int anatop_regmap_set_voltage_sel(struct regulator_dev *reg,
return regulator_set_voltage_sel_regmap(reg, selector);
}
+static int anatop_regmap_set_voltage_time_sel(struct regulator_dev *reg,
+ unsigned int old_sel,
+ unsigned int new_sel)
+{
+ struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+ u32 val;
+ int ret = 0;
+
+ /* check whether need to care about LDO ramp up speed */
+ if (anatop_reg->delay_bit_width && new_sel > old_sel) {
+ /*
+ * the delay for LDO ramp up time is
+ * based on the register setting, we need
+ * to calculate how many steps LDO need to
+ * ramp up, and how much delay needed. (us)
+ */
+ regmap_read(anatop_reg->anatop, anatop_reg->delay_reg, &val);
+ val = (val >> anatop_reg->delay_bit_shift) &
+ ((1 << anatop_reg->delay_bit_width) - 1);
+ ret = (new_sel - old_sel) * (LDO_RAMP_UP_UNIT_IN_CYCLES <<
+ val) / LDO_RAMP_UP_FREQ_IN_MHZ + 1;
+ }
+
+ return ret;
+}
+
static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg)
{
struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
@@ -67,6 +99,7 @@ static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg)
static struct regulator_ops anatop_rops = {
.set_voltage_sel = anatop_regmap_set_voltage_sel,
+ .set_voltage_time_sel = anatop_regmap_set_voltage_time_sel,
.get_voltage_sel = anatop_regmap_get_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
@@ -143,6 +176,14 @@ static int anatop_regulator_probe(struct platform_device *pdev)
goto anatop_probe_end;
}
+ /* read LDO ramp up setting, only for core reg */
+ of_property_read_u32(np, "anatop-delay-reg-offset",
+ &sreg->delay_reg);
+ of_property_read_u32(np, "anatop-delay-bit-width",
+ &sreg->delay_bit_width);
+ of_property_read_u32(np, "anatop-delay-bit-shift",
+ &sreg->delay_bit_shift);
+
rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) / 25000 + 1
+ sreg->min_bit_val;
rdesc->min_uV = sreg->min_voltage;
diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c
index a6d040cbf8a..e87536bf0be 100644
--- a/drivers/regulator/arizona-micsupp.c
+++ b/drivers/regulator/arizona-micsupp.c
@@ -21,6 +21,8 @@
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <sound/soc.h>
#include <linux/mfd/arizona/core.h>
#include <linux/mfd/arizona/pdata.h>
@@ -34,6 +36,8 @@ struct arizona_micsupp {
struct regulator_consumer_supply supply;
struct regulator_init_data init_data;
+
+ struct work_struct check_cp_work;
};
static int arizona_micsupp_list_voltage(struct regulator_dev *rdev,
@@ -72,9 +76,73 @@ static int arizona_micsupp_map_voltage(struct regulator_dev *rdev,
return selector;
}
+static void arizona_micsupp_check_cp(struct work_struct *work)
+{
+ struct arizona_micsupp *micsupp =
+ container_of(work, struct arizona_micsupp, check_cp_work);
+ struct snd_soc_dapm_context *dapm = micsupp->arizona->dapm;
+ struct arizona *arizona = micsupp->arizona;
+ struct regmap *regmap = arizona->regmap;
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(regmap, ARIZONA_MIC_CHARGE_PUMP_1, &reg);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to read CP state: %d\n", ret);
+ return;
+ }
+
+ if (dapm) {
+ if ((reg & (ARIZONA_CPMIC_ENA | ARIZONA_CPMIC_BYPASS)) ==
+ ARIZONA_CPMIC_ENA)
+ snd_soc_dapm_force_enable_pin(dapm, "MICSUPP");
+ else
+ snd_soc_dapm_disable_pin(dapm, "MICSUPP");
+
+ snd_soc_dapm_sync(dapm);
+ }
+}
+
+static int arizona_micsupp_enable(struct regulator_dev *rdev)
+{
+ struct arizona_micsupp *micsupp = rdev_get_drvdata(rdev);
+ int ret;
+
+ ret = regulator_enable_regmap(rdev);
+
+ if (ret == 0)
+ schedule_work(&micsupp->check_cp_work);
+
+ return ret;
+}
+
+static int arizona_micsupp_disable(struct regulator_dev *rdev)
+{
+ struct arizona_micsupp *micsupp = rdev_get_drvdata(rdev);
+ int ret;
+
+ ret = regulator_disable_regmap(rdev);
+ if (ret == 0)
+ schedule_work(&micsupp->check_cp_work);
+
+ return ret;
+}
+
+static int arizona_micsupp_set_bypass(struct regulator_dev *rdev, bool ena)
+{
+ struct arizona_micsupp *micsupp = rdev_get_drvdata(rdev);
+ int ret;
+
+ ret = regulator_set_bypass_regmap(rdev, ena);
+ if (ret == 0)
+ schedule_work(&micsupp->check_cp_work);
+
+ return ret;
+}
+
static struct regulator_ops arizona_micsupp_ops = {
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
+ .enable = arizona_micsupp_enable,
+ .disable = arizona_micsupp_disable,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = arizona_micsupp_list_voltage,
@@ -84,7 +152,7 @@ static struct regulator_ops arizona_micsupp_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_bypass = regulator_get_bypass_regmap,
- .set_bypass = regulator_set_bypass_regmap,
+ .set_bypass = arizona_micsupp_set_bypass,
};
static const struct regulator_desc arizona_micsupp = {
@@ -109,7 +177,8 @@ static const struct regulator_desc arizona_micsupp = {
static const struct regulator_init_data arizona_micsupp_default = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_VOLTAGE,
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_BYPASS,
.min_uV = 1700000,
.max_uV = 3300000,
},
@@ -131,6 +200,7 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
}
micsupp->arizona = arizona;
+ INIT_WORK(&micsupp->check_cp_work, arizona_micsupp_check_cp);
/*
* Since the chip usually supplies itself we provide some
diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c
index 2f1341db38a..f0ba8c4eefa 100644
--- a/drivers/regulator/as3711-regulator.c
+++ b/drivers/regulator/as3711-regulator.c
@@ -303,7 +303,7 @@ static int as3711_regulator_probe(struct platform_device *pdev)
reg_data = pdata ? pdata->init_data[id] : NULL;
/* No need to register if there is no regulator data */
- if (!ri->desc.name)
+ if (!reg_data)
continue;
reg = &regs[id];
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 278584302f2..da9782bd27d 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -200,8 +200,8 @@ static int regulator_check_consumers(struct regulator_dev *rdev,
}
if (*min_uV > *max_uV) {
- dev_err(regulator->dev, "Restricting voltage, %u-%uuV\n",
- regulator->min_uV, regulator->max_uV);
+ rdev_err(rdev, "Restricting voltage, %u-%uuV\n",
+ *min_uV, *max_uV);
return -EINVAL;
}
@@ -2080,10 +2080,20 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);
*/
int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
{
+ int ret;
+
sel <<= ffs(rdev->desc->vsel_mask) - 1;
- return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
+ ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
rdev->desc->vsel_mask, sel);
+ if (ret)
+ return ret;
+
+ if (rdev->desc->apply_bit)
+ ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
+ rdev->desc->apply_bit,
+ rdev->desc->apply_bit);
+ return ret;
}
EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap);
@@ -2229,8 +2239,11 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
best_val = rdev->desc->ops->list_voltage(rdev, ret);
if (min_uV <= best_val && max_uV >= best_val) {
selector = ret;
- ret = rdev->desc->ops->set_voltage_sel(rdev,
- ret);
+ if (old_selector == selector)
+ ret = 0;
+ else
+ ret = rdev->desc->ops->set_voltage_sel(
+ rdev, ret);
} else {
ret = -EINVAL;
}
@@ -2241,7 +2254,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
/* Call set_voltage_time_sel if successfully obtained old_selector */
if (ret == 0 && _regulator_is_enabled(rdev) && old_selector >= 0 &&
- rdev->desc->ops->set_voltage_time_sel) {
+ old_selector != selector && rdev->desc->ops->set_voltage_time_sel) {
delay = rdev->desc->ops->set_voltage_time_sel(rdev,
old_selector, selector);
@@ -2294,6 +2307,7 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
{
struct regulator_dev *rdev = regulator->rdev;
int ret = 0;
+ int old_min_uV, old_max_uV;
mutex_lock(&rdev->mutex);
@@ -2315,18 +2329,29 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
if (ret < 0)
goto out;
+
+ /* restore original values in case of error */
+ old_min_uV = regulator->min_uV;
+ old_max_uV = regulator->max_uV;
regulator->min_uV = min_uV;
regulator->max_uV = max_uV;
ret = regulator_check_consumers(rdev, &min_uV, &max_uV);
if (ret < 0)
- goto out;
+ goto out2;
ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
-
+ if (ret < 0)
+ goto out2;
+
out:
mutex_unlock(&rdev->mutex);
return ret;
+out2:
+ regulator->min_uV = old_min_uV;
+ regulator->max_uV = old_max_uV;
+ mutex_unlock(&rdev->mutex);
+ return ret;
}
EXPORT_SYMBOL_GPL(regulator_set_voltage);
@@ -3208,7 +3233,7 @@ static int add_regulator_attributes(struct regulator_dev *rdev)
if (status < 0)
return status;
}
- if (ops->is_enabled) {
+ if (rdev->ena_gpio || ops->is_enabled) {
status = device_create_file(dev, &dev_attr_state);
if (status < 0)
return status;
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index d0963090442..96b569abb46 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -70,7 +70,6 @@ struct da9052_regulator_info {
int step_uV;
int min_uV;
int max_uV;
- unsigned char activate_bit;
};
struct da9052_regulator {
@@ -210,36 +209,6 @@ static int da9052_map_voltage(struct regulator_dev *rdev,
return sel;
}
-static int da9052_regulator_set_voltage_sel(struct regulator_dev *rdev,
- unsigned int selector)
-{
- struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
- struct da9052_regulator_info *info = regulator->info;
- int id = rdev_get_id(rdev);
- int ret;
-
- ret = da9052_reg_update(regulator->da9052, rdev->desc->vsel_reg,
- rdev->desc->vsel_mask, selector);
- if (ret < 0)
- return ret;
-
- /* Some LDOs and DCDCs are DVC controlled which requires enabling of
- * the activate bit to implment the changes on the output.
- */
- switch (id) {
- case DA9052_ID_BUCK1:
- case DA9052_ID_BUCK2:
- case DA9052_ID_BUCK3:
- case DA9052_ID_LDO2:
- case DA9052_ID_LDO3:
- ret = da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
- info->activate_bit, info->activate_bit);
- break;
- }
-
- return ret;
-}
-
static struct regulator_ops da9052_dcdc_ops = {
.get_current_limit = da9052_dcdc_get_current_limit,
.set_current_limit = da9052_dcdc_set_current_limit,
@@ -247,7 +216,7 @@ static struct regulator_ops da9052_dcdc_ops = {
.list_voltage = da9052_list_voltage,
.map_voltage = da9052_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = da9052_regulator_set_voltage_sel,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -257,7 +226,7 @@ static struct regulator_ops da9052_ldo_ops = {
.list_voltage = da9052_list_voltage,
.map_voltage = da9052_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = da9052_regulator_set_voltage_sel,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -274,13 +243,14 @@ static struct regulator_ops da9052_ldo_ops = {
.owner = THIS_MODULE,\
.vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.vsel_mask = (1 << (sbits)) - 1,\
+ .apply_reg = DA9052_SUPPLY_REG, \
+ .apply_bit = (abits), \
.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.enable_mask = 1 << (ebits),\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
- .activate_bit = (abits),\
}
#define DA9052_DCDC(_id, step, min, max, sbits, ebits, abits) \
@@ -294,13 +264,14 @@ static struct regulator_ops da9052_ldo_ops = {
.owner = THIS_MODULE,\
.vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.vsel_mask = (1 << (sbits)) - 1,\
+ .apply_reg = DA9052_SUPPLY_REG, \
+ .apply_bit = (abits), \
.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.enable_mask = 1 << (ebits),\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
- .activate_bit = (abits),\
}
static struct da9052_regulator_info da9052_regulator_info[] = {
@@ -395,9 +366,9 @@ static int da9052_regulator_probe(struct platform_device *pdev)
config.init_data = pdata->regulators[pdev->id];
} else {
#ifdef CONFIG_OF
- struct device_node *nproot = da9052->dev->of_node;
- struct device_node *np;
+ struct device_node *nproot, *np;
+ nproot = of_node_get(da9052->dev->of_node);
if (!nproot)
return -ENODEV;
@@ -414,6 +385,7 @@ static int da9052_regulator_probe(struct platform_device *pdev)
break;
}
}
+ of_node_put(nproot);
#endif
}
diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c
index 1a05ac66878..30221099d09 100644
--- a/drivers/regulator/da9055-regulator.c
+++ b/drivers/regulator/da9055-regulator.c
@@ -58,7 +58,6 @@ struct da9055_volt_reg {
int reg_b;
int sl_shift;
int v_mask;
- int v_shift;
};
struct da9055_mode_reg {
@@ -388,7 +387,6 @@ static struct regulator_ops da9055_ldo_ops = {
.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
.sl_shift = 7,\
.v_mask = (1 << (vbits)) - 1,\
- .v_shift = (vbits),\
},\
}
@@ -417,7 +415,6 @@ static struct regulator_ops da9055_ldo_ops = {
.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
.sl_shift = 7,\
.v_mask = (1 << (vbits)) - 1,\
- .v_shift = (vbits),\
},\
.mode = {\
.reg = DA9055_REG_BCORE_MODE,\
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index bae681ccd3e..9d39eb4aafa 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -132,7 +132,7 @@ static struct regulator_ops gpio_regulator_voltage_ops = {
.list_voltage = gpio_regulator_list_voltage,
};
-struct gpio_regulator_config *
+static struct gpio_regulator_config *
of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
{
struct gpio_regulator_config *config;
@@ -163,10 +163,7 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
/* Fetch GPIOs. */
- for (i = 0; ; i++)
- if (of_get_named_gpio(np, "gpios", i) < 0)
- break;
- config->nr_gpios = i;
+ config->nr_gpios = of_gpio_count(np);
config->gpios = devm_kzalloc(dev,
sizeof(struct gpio) * config->nr_gpios,
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 5f68ff11a29..9cb2c0f3451 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -73,8 +73,6 @@ static const unsigned int buck_voltage_map[] = {
};
#define BUCK_TARGET_VOL_MASK 0x3f
-#define BUCK_TARGET_VOL_MIN_IDX 0x01
-#define BUCK_TARGET_VOL_MAX_IDX 0x19
#define LP3971_BUCK_RAMP_REG(x) (buck_base_addr[x]+2)
@@ -140,7 +138,7 @@ static int lp3971_ldo_disable(struct regulator_dev *dev)
return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0);
}
-static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
+static int lp3971_ldo_get_voltage_sel(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev) - LP3971_LDO1;
@@ -149,7 +147,7 @@ static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
- return dev->desc->volt_table[val];
+ return val;
}
static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -168,7 +166,7 @@ static struct regulator_ops lp3971_ldo_ops = {
.is_enabled = lp3971_ldo_is_enabled,
.enable = lp3971_ldo_enable,
.disable = lp3971_ldo_disable,
- .get_voltage = lp3971_ldo_get_voltage,
+ .get_voltage_sel = lp3971_ldo_get_voltage_sel,
.set_voltage_sel = lp3971_ldo_set_voltage_sel,
};
@@ -201,24 +199,16 @@ static int lp3971_dcdc_disable(struct regulator_dev *dev)
return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0);
}
-static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
+static int lp3971_dcdc_get_voltage_sel(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
int buck = rdev_get_id(dev) - LP3971_DCDC1;
u16 reg;
- int val;
reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck));
reg &= BUCK_TARGET_VOL_MASK;
- if (reg <= BUCK_TARGET_VOL_MAX_IDX)
- val = buck_voltage_map[reg];
- else {
- val = 0;
- dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
- }
-
- return val;
+ return reg;
}
static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev,
@@ -249,7 +239,7 @@ static struct regulator_ops lp3971_dcdc_ops = {
.is_enabled = lp3971_dcdc_is_enabled,
.enable = lp3971_dcdc_enable,
.disable = lp3971_dcdc_disable,
- .get_voltage = lp3971_dcdc_get_voltage,
+ .get_voltage_sel = lp3971_dcdc_get_voltage_sel,
.set_voltage_sel = lp3971_dcdc_set_voltage_sel,
};
diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c
index 69c42c318b8..0baabcfb578 100644
--- a/drivers/regulator/lp3972.c
+++ b/drivers/regulator/lp3972.c
@@ -165,8 +165,6 @@ static const int buck_base_addr[] = {
#define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x])
#define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x])
#define LP3972_BUCK_VOL_MASK 0x1f
-#define LP3972_BUCK_VOL_MIN_IDX(x) ((x) ? 0x01 : 0x00)
-#define LP3972_BUCK_VOL_MAX_IDX(x) ((x) ? 0x19 : 0x1f)
static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count,
u16 *dest)
@@ -257,7 +255,7 @@ static int lp3972_ldo_disable(struct regulator_dev *dev)
mask, 0);
}
-static int lp3972_ldo_get_voltage(struct regulator_dev *dev)
+static int lp3972_ldo_get_voltage_sel(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int ldo = rdev_get_id(dev) - LP3972_LDO1;
@@ -267,7 +265,7 @@ static int lp3972_ldo_get_voltage(struct regulator_dev *dev)
reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask;
- return dev->desc->volt_table[val];
+ return val;
}
static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -314,7 +312,7 @@ static struct regulator_ops lp3972_ldo_ops = {
.is_enabled = lp3972_ldo_is_enabled,
.enable = lp3972_ldo_enable,
.disable = lp3972_ldo_disable,
- .get_voltage = lp3972_ldo_get_voltage,
+ .get_voltage_sel = lp3972_ldo_get_voltage_sel,
.set_voltage_sel = lp3972_ldo_set_voltage_sel,
};
@@ -353,24 +351,16 @@ static int lp3972_dcdc_disable(struct regulator_dev *dev)
return val;
}
-static int lp3972_dcdc_get_voltage(struct regulator_dev *dev)
+static int lp3972_dcdc_get_voltage_sel(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
int buck = rdev_get_id(dev) - LP3972_DCDC1;
u16 reg;
- int val;
reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck));
reg &= LP3972_BUCK_VOL_MASK;
- if (reg <= LP3972_BUCK_VOL_MAX_IDX(buck))
- val = dev->desc->volt_table[reg];
- else {
- val = 0;
- dev_warn(&dev->dev, "chip reported incorrect voltage value."
- " reg = %d\n", reg);
- }
- return val;
+ return reg;
}
static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
@@ -402,7 +392,7 @@ static struct regulator_ops lp3972_dcdc_ops = {
.is_enabled = lp3972_dcdc_is_enabled,
.enable = lp3972_dcdc_enable,
.disable = lp3972_dcdc_disable,
- .get_voltage = lp3972_dcdc_get_voltage,
+ .get_voltage_sel = lp3972_dcdc_get_voltage_sel,
.set_voltage_sel = lp3972_dcdc_set_voltage_sel,
};
diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c
index 9289ead715c..8e3c7ae0047 100644
--- a/drivers/regulator/lp872x.c
+++ b/drivers/regulator/lp872x.c
@@ -181,20 +181,6 @@ static inline int lp872x_update_bits(struct lp872x *lp, u8 addr,
return regmap_update_bits(lp->regmap, addr, mask, data);
}
-static int _rdev_to_offset(struct regulator_dev *rdev)
-{
- enum lp872x_regulator_id id = rdev_get_id(rdev);
-
- switch (id) {
- case LP8720_ID_LDO1 ... LP8720_ID_BUCK:
- return id;
- case LP8725_ID_LDO1 ... LP8725_ID_BUCK2:
- return id - LP8725_ID_BASE;
- default:
- return -EINVAL;
- }
-}
-
static int lp872x_get_timestep_usec(struct lp872x *lp)
{
enum lp872x_id chip = lp->chipid;
@@ -234,28 +220,20 @@ static int lp872x_get_timestep_usec(struct lp872x *lp)
static int lp872x_regulator_enable_time(struct regulator_dev *rdev)
{
struct lp872x *lp = rdev_get_drvdata(rdev);
- enum lp872x_regulator_id regulator = rdev_get_id(rdev);
+ enum lp872x_regulator_id rid = rdev_get_id(rdev);
int time_step_us = lp872x_get_timestep_usec(lp);
- int ret, offset;
+ int ret;
u8 addr, val;
if (time_step_us < 0)
return -EINVAL;
- switch (regulator) {
- case LP8720_ID_LDO1 ... LP8720_ID_LDO5:
- case LP8725_ID_LDO1 ... LP8725_ID_LILO2:
- offset = _rdev_to_offset(rdev);
- if (offset < 0)
- return -EINVAL;
-
- addr = LP872X_LDO1_VOUT + offset;
- break;
- case LP8720_ID_BUCK:
- addr = LP8720_BUCK_VOUT1;
+ switch (rid) {
+ case LP8720_ID_LDO1 ... LP8720_ID_BUCK:
+ addr = LP872X_LDO1_VOUT + rid;
break;
- case LP8725_ID_BUCK1:
- addr = LP8725_BUCK1_VOUT1;
+ case LP8725_ID_LDO1 ... LP8725_ID_BUCK1:
+ addr = LP872X_LDO1_VOUT + rid - LP8725_ID_BASE;
break;
case LP8725_ID_BUCK2:
addr = LP8725_BUCK2_VOUT1;
diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c
new file mode 100644
index 00000000000..f0f6ea05065
--- /dev/null
+++ b/drivers/regulator/lp8755.c
@@ -0,0 +1,566 @@
+/*
+ * LP8755 High Performance Power Management Unit : System Interface Driver
+ * (based on rev. 0.26)
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/platform_data/lp8755.h>
+
+#define LP8755_REG_BUCK0 0x00
+#define LP8755_REG_BUCK1 0x03
+#define LP8755_REG_BUCK2 0x04
+#define LP8755_REG_BUCK3 0x01
+#define LP8755_REG_BUCK4 0x05
+#define LP8755_REG_BUCK5 0x02
+#define LP8755_REG_MAX 0xFF
+
+#define LP8755_BUCK_EN_M BIT(7)
+#define LP8755_BUCK_LINEAR_OUT_MAX 0x76
+#define LP8755_BUCK_VOUT_M 0x7F
+
+struct lp8755_mphase {
+ int nreg;
+ int buck_num[LP8755_BUCK_MAX];
+};
+
+struct lp8755_chip {
+ struct device *dev;
+ struct regmap *regmap;
+ struct lp8755_platform_data *pdata;
+
+ int irq;
+ unsigned int irqmask;
+
+ int mphase;
+ struct regulator_dev *rdev[LP8755_BUCK_MAX];
+};
+
+/**
+ *lp8755_read : read a single register value from lp8755.
+ *@pchip : device to read from
+ *@reg : register to read from
+ *@val : pointer to store read value
+ */
+static int lp8755_read(struct lp8755_chip *pchip, unsigned int reg,
+ unsigned int *val)
+{
+ return regmap_read(pchip->regmap, reg, val);
+}
+
+/**
+ *lp8755_write : write a single register value to lp8755.
+ *@pchip : device to write to
+ *@reg : register to write to
+ *@val : value to be written
+ */
+static int lp8755_write(struct lp8755_chip *pchip, unsigned int reg,
+ unsigned int val)
+{
+ return regmap_write(pchip->regmap, reg, val);
+}
+
+/**
+ *lp8755_update_bits : set the values of bit fields in lp8755 register.
+ *@pchip : device to read from
+ *@reg : register to update
+ *@mask : bitmask to be changed
+ *@val : value for bitmask
+ */
+static int lp8755_update_bits(struct lp8755_chip *pchip, unsigned int reg,
+ unsigned int mask, unsigned int val)
+{
+ return regmap_update_bits(pchip->regmap, reg, mask, val);
+}
+
+static int lp8755_buck_enable_time(struct regulator_dev *rdev)
+{
+ int ret;
+ unsigned int regval;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ ret = lp8755_read(pchip, 0x12 + id, &regval);
+ if (ret < 0) {
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+ }
+ return (regval & 0xff) * 100;
+}
+
+static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ int ret;
+ unsigned int regbval = 0x0;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ /* forced pwm mode */
+ regbval = (0x01 << id);
+ break;
+ case REGULATOR_MODE_NORMAL:
+ /* enable automatic pwm/pfm mode */
+ ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x00);
+ if (ret < 0)
+ goto err_i2c;
+ break;
+ case REGULATOR_MODE_IDLE:
+ /* enable automatic pwm/pfm/lppfm mode */
+ ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x20);
+ if (ret < 0)
+ goto err_i2c;
+
+ ret = lp8755_update_bits(pchip, 0x10, 0x01, 0x01);
+ if (ret < 0)
+ goto err_i2c;
+ break;
+ default:
+ dev_err(pchip->dev, "Not supported buck mode %s\n", __func__);
+ /* forced pwm mode */
+ regbval = (0x01 << id);
+ }
+
+ ret = lp8755_update_bits(pchip, 0x06, 0x01 << id, regbval);
+ if (ret < 0)
+ goto err_i2c;
+ return ret;
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev)
+{
+ int ret;
+ unsigned int regval;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ ret = lp8755_read(pchip, 0x06, &regval);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* mode fast means forced pwm mode */
+ if (regval & (0x01 << id))
+ return REGULATOR_MODE_FAST;
+
+ ret = lp8755_read(pchip, 0x08 + id, &regval);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* mode idle means automatic pwm/pfm/lppfm mode */
+ if (regval & 0x20)
+ return REGULATOR_MODE_IDLE;
+
+ /* mode normal means automatic pwm/pfm mode */
+ return REGULATOR_MODE_NORMAL;
+
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return 0;
+}
+
+static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp)
+{
+ int ret;
+ unsigned int regval = 0x00;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ /* uV/us */
+ switch (ramp) {
+ case 0 ... 230:
+ regval = 0x07;
+ break;
+ case 231 ... 470:
+ regval = 0x06;
+ break;
+ case 471 ... 940:
+ regval = 0x05;
+ break;
+ case 941 ... 1900:
+ regval = 0x04;
+ break;
+ case 1901 ... 3800:
+ regval = 0x03;
+ break;
+ case 3801 ... 7500:
+ regval = 0x02;
+ break;
+ case 7501 ... 15000:
+ regval = 0x01;
+ break;
+ case 15001 ... 30000:
+ regval = 0x00;
+ break;
+ default:
+ dev_err(pchip->dev,
+ "Not supported ramp value %d %s\n", ramp, __func__);
+ return -EINVAL;
+ }
+
+ ret = lp8755_update_bits(pchip, 0x07 + id, 0x07, regval);
+ if (ret < 0)
+ goto err_i2c;
+ return ret;
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+static struct regulator_ops lp8755_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable_time = lp8755_buck_enable_time,
+ .set_mode = lp8755_buck_set_mode,
+ .get_mode = lp8755_buck_get_mode,
+ .set_ramp_delay = lp8755_buck_set_ramp,
+};
+
+#define lp8755_rail(_id) "lp8755_buck"#_id
+#define lp8755_buck_init(_id)\
+{\
+ .constraints = {\
+ .name = lp8755_rail(_id),\
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,\
+ .min_uV = 500000,\
+ .max_uV = 1675000,\
+ },\
+}
+
+static struct regulator_init_data lp8755_reg_default[LP8755_BUCK_MAX] = {
+ [LP8755_BUCK0] = lp8755_buck_init(0),
+ [LP8755_BUCK1] = lp8755_buck_init(1),
+ [LP8755_BUCK2] = lp8755_buck_init(2),
+ [LP8755_BUCK3] = lp8755_buck_init(3),
+ [LP8755_BUCK4] = lp8755_buck_init(4),
+ [LP8755_BUCK5] = lp8755_buck_init(5),
+};
+
+static const struct lp8755_mphase mphase_buck[MPHASE_CONF_MAX] = {
+ { 3, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK5 } },
+ { 6, { LP8755_BUCK0, LP8755_BUCK1, LP8755_BUCK2, LP8755_BUCK3,
+ LP8755_BUCK4, LP8755_BUCK5 } },
+ { 5, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK4,
+ LP8755_BUCK5} },
+ { 4, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK4, LP8755_BUCK5} },
+ { 3, { LP8755_BUCK0, LP8755_BUCK4, LP8755_BUCK5} },
+ { 2, { LP8755_BUCK0, LP8755_BUCK5} },
+ { 1, { LP8755_BUCK0} },
+ { 2, { LP8755_BUCK0, LP8755_BUCK3} },
+ { 4, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK5} },
+};
+
+static int lp8755_init_data(struct lp8755_chip *pchip)
+{
+ unsigned int regval;
+ int ret, icnt, buck_num;
+ struct lp8755_platform_data *pdata = pchip->pdata;
+
+ /* read back muti-phase configuration */
+ ret = lp8755_read(pchip, 0x3D, &regval);
+ if (ret < 0)
+ goto out_i2c_error;
+ pchip->mphase = regval & 0x0F;
+
+ /* set default data based on multi-phase config */
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
+ buck_num = mphase_buck[pchip->mphase].buck_num[icnt];
+ pdata->buck_data[buck_num] = &lp8755_reg_default[buck_num];
+ }
+ return ret;
+
+out_i2c_error:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+#define lp8755_buck_desc(_id)\
+{\
+ .name = lp8755_rail(_id),\
+ .id = LP8755_BUCK##_id,\
+ .ops = &lp8755_buck_ops,\
+ .n_voltages = LP8755_BUCK_LINEAR_OUT_MAX+1,\
+ .uV_step = 10000,\
+ .min_uV = 500000,\
+ .type = REGULATOR_VOLTAGE,\
+ .owner = THIS_MODULE,\
+ .enable_reg = LP8755_REG_BUCK##_id,\
+ .enable_mask = LP8755_BUCK_EN_M,\
+ .vsel_reg = LP8755_REG_BUCK##_id,\
+ .vsel_mask = LP8755_BUCK_VOUT_M,\
+}
+
+static struct regulator_desc lp8755_regulators[] = {
+ lp8755_buck_desc(0),
+ lp8755_buck_desc(1),
+ lp8755_buck_desc(2),
+ lp8755_buck_desc(3),
+ lp8755_buck_desc(4),
+ lp8755_buck_desc(5),
+};
+
+static int lp8755_regulator_init(struct lp8755_chip *pchip)
+{
+ int ret, icnt, buck_num;
+ struct lp8755_platform_data *pdata = pchip->pdata;
+ struct regulator_config rconfig = { };
+
+ rconfig.regmap = pchip->regmap;
+ rconfig.dev = pchip->dev;
+ rconfig.driver_data = pchip;
+
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
+ buck_num = mphase_buck[pchip->mphase].buck_num[icnt];
+ rconfig.init_data = pdata->buck_data[buck_num];
+ rconfig.of_node = pchip->dev->of_node;
+ pchip->rdev[buck_num] =
+ regulator_register(&lp8755_regulators[buck_num], &rconfig);
+ if (IS_ERR(pchip->rdev[buck_num])) {
+ ret = PTR_ERR(pchip->rdev[buck_num]);
+ pchip->rdev[buck_num] = NULL;
+ dev_err(pchip->dev, "regulator init failed: buck %d\n",
+ buck_num);
+ goto err_buck;
+ }
+ }
+
+ return 0;
+
+err_buck:
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ regulator_unregister(pchip->rdev[icnt]);
+ return ret;
+}
+
+static irqreturn_t lp8755_irq_handler(int irq, void *data)
+{
+ int ret, icnt;
+ unsigned int flag0, flag1;
+ struct lp8755_chip *pchip = data;
+
+ /* read flag0 register */
+ ret = lp8755_read(pchip, 0x0D, &flag0);
+ if (ret < 0)
+ goto err_i2c;
+ /* clear flag register to pull up int. pin */
+ ret = lp8755_write(pchip, 0x0D, 0x00);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* sent power fault detection event to specific regulator */
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ if ((flag0 & (0x4 << icnt))
+ && (pchip->irqmask & (0x04 << icnt))
+ && (pchip->rdev[icnt] != NULL))
+ regulator_notifier_call_chain(pchip->rdev[icnt],
+ LP8755_EVENT_PWR_FAULT,
+ NULL);
+
+ /* read flag1 register */
+ ret = lp8755_read(pchip, 0x0E, &flag1);
+ if (ret < 0)
+ goto err_i2c;
+ /* clear flag register to pull up int. pin */
+ ret = lp8755_write(pchip, 0x0E, 0x00);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* send OCP event to all regualtor devices */
+ if ((flag1 & 0x01) && (pchip->irqmask & 0x01))
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ if (pchip->rdev[icnt] != NULL)
+ regulator_notifier_call_chain(pchip->rdev[icnt],
+ LP8755_EVENT_OCP,
+ NULL);
+
+ /* send OVP event to all regualtor devices */
+ if ((flag1 & 0x02) && (pchip->irqmask & 0x02))
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ if (pchip->rdev[icnt] != NULL)
+ regulator_notifier_call_chain(pchip->rdev[icnt],
+ LP8755_EVENT_OVP,
+ NULL);
+ return IRQ_HANDLED;
+
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return IRQ_NONE;
+}
+
+static int lp8755_int_config(struct lp8755_chip *pchip)
+{
+ int ret;
+ unsigned int regval;
+
+ if (pchip->irq == 0) {
+ dev_warn(pchip->dev, "not use interrupt : %s\n", __func__);
+ return 0;
+ }
+
+ ret = lp8755_read(pchip, 0x0F, &regval);
+ if (ret < 0)
+ goto err_i2c;
+ pchip->irqmask = regval;
+ ret = request_threaded_irq(pchip->irq, NULL, lp8755_irq_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "lp8755-irq", pchip);
+ if (ret)
+ return ret;
+
+ return ret;
+
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+static const struct regmap_config lp8755_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = LP8755_REG_MAX,
+};
+
+static int lp8755_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret, icnt;
+ struct lp8755_chip *pchip;
+ struct lp8755_platform_data *pdata = client->dev.platform_data;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "i2c functionality check fail.\n");
+ return -EOPNOTSUPP;
+ }
+
+ pchip = devm_kzalloc(&client->dev,
+ sizeof(struct lp8755_chip), GFP_KERNEL);
+ if (!pchip)
+ return -ENOMEM;
+
+ pchip->dev = &client->dev;
+ pchip->regmap = devm_regmap_init_i2c(client, &lp8755_regmap);
+ if (IS_ERR(pchip->regmap)) {
+ ret = PTR_ERR(pchip->regmap);
+ dev_err(&client->dev, "fail to allocate regmap %d\n", ret);
+ return ret;
+ }
+ i2c_set_clientdata(client, pchip);
+
+ if (pdata != NULL) {
+ pchip->pdata = pdata;
+ pchip->mphase = pdata->mphase;
+ } else {
+ pchip->pdata = devm_kzalloc(pchip->dev,
+ sizeof(struct lp8755_platform_data),
+ GFP_KERNEL);
+ if (!pchip->pdata)
+ return -ENOMEM;
+ ret = lp8755_init_data(pchip);
+ if (ret < 0) {
+ dev_err(&client->dev, "fail to initialize chip\n");
+ return ret;
+ }
+ }
+
+ ret = lp8755_regulator_init(pchip);
+ if (ret < 0) {
+ dev_err(&client->dev, "fail to initialize regulators\n");
+ goto err_regulator;
+ }
+
+ pchip->irq = client->irq;
+ ret = lp8755_int_config(pchip);
+ if (ret < 0) {
+ dev_err(&client->dev, "fail to irq config\n");
+ goto err_irq;
+ }
+
+ return ret;
+
+err_irq:
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++)
+ regulator_unregister(pchip->rdev[icnt]);
+
+err_regulator:
+ /* output disable */
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ lp8755_write(pchip, icnt, 0x00);
+
+ return ret;
+}
+
+static int lp8755_remove(struct i2c_client *client)
+{
+ int icnt;
+ struct lp8755_chip *pchip = i2c_get_clientdata(client);
+
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++)
+ regulator_unregister(pchip->rdev[icnt]);
+
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ lp8755_write(pchip, icnt, 0x00);
+
+ if (pchip->irq != 0)
+ free_irq(pchip->irq, pchip);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp8755_id[] = {
+ {LP8755_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lp8755_id);
+
+static struct i2c_driver lp8755_i2c_driver = {
+ .driver = {
+ .name = LP8755_NAME,
+ },
+ .probe = lp8755_probe,
+ .remove = lp8755_remove,
+ .id_table = lp8755_id,
+};
+
+static int __init lp8755_init(void)
+{
+ return i2c_add_driver(&lp8755_i2c_driver);
+}
+
+subsys_initcall(lp8755_init);
+
+static void __exit lp8755_exit(void)
+{
+ i2c_del_driver(&lp8755_i2c_driver);
+}
+
+module_exit(lp8755_exit);
+
+MODULE_DESCRIPTION("Texas Instruments lp8755 driver");
+MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c
index aef3f2b0c5e..97891a7ea7b 100644
--- a/drivers/regulator/lp8788-buck.c
+++ b/drivers/regulator/lp8788-buck.c
@@ -103,16 +103,6 @@ static const int lp8788_buck_vtbl[] = {
1950000, 2000000,
};
-static const u8 buck1_vout_addr[] = {
- LP8788_BUCK1_VOUT0, LP8788_BUCK1_VOUT1,
- LP8788_BUCK1_VOUT2, LP8788_BUCK1_VOUT3,
-};
-
-static const u8 buck2_vout_addr[] = {
- LP8788_BUCK2_VOUT0, LP8788_BUCK2_VOUT1,
- LP8788_BUCK2_VOUT2, LP8788_BUCK2_VOUT3,
-};
-
static void lp8788_buck1_set_dvs(struct lp8788_buck *buck)
{
struct lp8788_buck1_dvs *dvs = (struct lp8788_buck1_dvs *)buck->dvs;
@@ -235,7 +225,7 @@ static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck,
lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S;
}
- addr = buck1_vout_addr[idx];
+ addr = LP8788_BUCK1_VOUT0 + idx;
break;
case BUCK2:
if (mode == EXTPIN) {
@@ -258,7 +248,7 @@ static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck,
lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
idx = (val & LP8788_BUCK2_DVS_M) >> LP8788_BUCK2_DVS_S;
}
- addr = buck2_vout_addr[idx];
+ addr = LP8788_BUCK2_VOUT0 + idx;
break;
default:
goto err;
@@ -429,7 +419,8 @@ static struct regulator_desc lp8788_buck_desc[] = {
},
};
-static int lp8788_dvs_gpio_request(struct lp8788_buck *buck,
+static int lp8788_dvs_gpio_request(struct platform_device *pdev,
+ struct lp8788_buck *buck,
enum lp8788_buck_id id)
{
struct lp8788_platform_data *pdata = buck->lp->pdata;
@@ -440,7 +431,7 @@ static int lp8788_dvs_gpio_request(struct lp8788_buck *buck,
switch (id) {
case BUCK1:
gpio = pdata->buck1_dvs->gpio;
- ret = devm_gpio_request_one(buck->lp->dev, gpio, DVS_LOW,
+ ret = devm_gpio_request_one(&pdev->dev, gpio, DVS_LOW,
b1_name);
if (ret)
return ret;
@@ -448,9 +439,9 @@ static int lp8788_dvs_gpio_request(struct lp8788_buck *buck,
buck->dvs = pdata->buck1_dvs;
break;
case BUCK2:
- for (i = 0 ; i < LP8788_NUM_BUCK2_DVS ; i++) {
+ for (i = 0; i < LP8788_NUM_BUCK2_DVS; i++) {
gpio = pdata->buck2_dvs->gpio[i];
- ret = devm_gpio_request_one(buck->lp->dev, gpio,
+ ret = devm_gpio_request_one(&pdev->dev, gpio,
DVS_LOW, b2_name[i]);
if (ret)
return ret;
@@ -464,7 +455,8 @@ static int lp8788_dvs_gpio_request(struct lp8788_buck *buck,
return 0;
}
-static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
+static int lp8788_init_dvs(struct platform_device *pdev,
+ struct lp8788_buck *buck, enum lp8788_buck_id id)
{
struct lp8788_platform_data *pdata = buck->lp->pdata;
u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M };
@@ -472,7 +464,7 @@ static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C };
/* no dvs for buck3, 4 */
- if (id == BUCK3 || id == BUCK4)
+ if (id > BUCK2)
return 0;
/* no dvs platform data, then dvs will be selected by I2C registers */
@@ -483,7 +475,7 @@ static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
(id == BUCK2 && !pdata->buck2_dvs))
goto set_default_dvs_mode;
- if (lp8788_dvs_gpio_request(buck, id))
+ if (lp8788_dvs_gpio_request(pdev, buck, id))
goto set_default_dvs_mode;
return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
@@ -503,17 +495,20 @@ static int lp8788_buck_probe(struct platform_device *pdev)
struct regulator_dev *rdev;
int ret;
- buck = devm_kzalloc(lp->dev, sizeof(struct lp8788_buck), GFP_KERNEL);
+ if (id >= LP8788_NUM_BUCKS)
+ return -EINVAL;
+
+ buck = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_buck), GFP_KERNEL);
if (!buck)
return -ENOMEM;
buck->lp = lp;
- ret = lp8788_init_dvs(buck, id);
+ ret = lp8788_init_dvs(pdev, buck, id);
if (ret)
return ret;
- cfg.dev = lp->dev;
+ cfg.dev = pdev->dev.parent;
cfg.init_data = lp->pdata ? lp->pdata->buck_data[id] : NULL;
cfg.driver_data = buck;
cfg.regmap = lp->regmap;
@@ -521,7 +516,7 @@ static int lp8788_buck_probe(struct platform_device *pdev)
rdev = regulator_register(&lp8788_buck_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
- dev_err(lp->dev, "BUCK%d regulator register err = %d\n",
+ dev_err(&pdev->dev, "BUCK%d regulator register err = %d\n",
id + 1, ret);
return ret;
}
diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c
index 3792741708c..cd5a14ad926 100644
--- a/drivers/regulator/lp8788-ldo.c
+++ b/drivers/regulator/lp8788-ldo.c
@@ -88,11 +88,6 @@
#define ENABLE GPIOF_OUT_INIT_HIGH
#define DISABLE GPIOF_OUT_INIT_LOW
-enum lp8788_enable_mode {
- REGISTER,
- EXTPIN,
-};
-
enum lp8788_ldo_id {
DLDO1,
DLDO2,
@@ -189,114 +184,38 @@ static enum lp8788_ldo_id lp8788_aldo_id[] = {
ALDO10,
};
-/* DLDO 7, 9 and 11, ALDO 1 ~ 5 and 7
- : can be enabled either by external pin or by i2c register */
-static enum lp8788_enable_mode
-lp8788_get_ldo_enable_mode(struct lp8788_ldo *ldo, enum lp8788_ldo_id id)
-{
- int ret;
- u8 val, mask;
-
- ret = lp8788_read_byte(ldo->lp, LP8788_EN_SEL, &val);
- if (ret)
- return ret;
-
- switch (id) {
- case DLDO7:
- mask = LP8788_EN_SEL_DLDO7_M;
- break;
- case DLDO9:
- case DLDO11:
- mask = LP8788_EN_SEL_DLDO911_M;
- break;
- case ALDO1:
- mask = LP8788_EN_SEL_ALDO1_M;
- break;
- case ALDO2 ... ALDO4:
- mask = LP8788_EN_SEL_ALDO234_M;
- break;
- case ALDO5:
- mask = LP8788_EN_SEL_ALDO5_M;
- break;
- case ALDO7:
- mask = LP8788_EN_SEL_ALDO7_M;
- break;
- default:
- return REGISTER;
- }
-
- return val & mask ? EXTPIN : REGISTER;
-}
-
-static int lp8788_ldo_ctrl_by_extern_pin(struct lp8788_ldo *ldo, int pinstate)
-{
- struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
-
- if (!pin)
- return -EINVAL;
-
- if (gpio_is_valid(pin->gpio))
- gpio_set_value(pin->gpio, pinstate);
-
- return 0;
-}
-
-static int lp8788_ldo_is_enabled_by_extern_pin(struct lp8788_ldo *ldo)
-{
- struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
-
- if (!pin)
- return -EINVAL;
-
- return gpio_get_value(pin->gpio) ? 1 : 0;
-}
-
static int lp8788_ldo_enable(struct regulator_dev *rdev)
{
struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
- enum lp8788_ldo_id id = rdev_get_id(rdev);
- enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
- switch (mode) {
- case EXTPIN:
- return lp8788_ldo_ctrl_by_extern_pin(ldo, ENABLE);
- case REGISTER:
+ if (ldo->en_pin) {
+ gpio_set_value(ldo->en_pin->gpio, ENABLE);
+ return 0;
+ } else {
return regulator_enable_regmap(rdev);
- default:
- return -EINVAL;
}
}
static int lp8788_ldo_disable(struct regulator_dev *rdev)
{
struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
- enum lp8788_ldo_id id = rdev_get_id(rdev);
- enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
- switch (mode) {
- case EXTPIN:
- return lp8788_ldo_ctrl_by_extern_pin(ldo, DISABLE);
- case REGISTER:
+ if (ldo->en_pin) {
+ gpio_set_value(ldo->en_pin->gpio, DISABLE);
+ return 0;
+ } else {
return regulator_disable_regmap(rdev);
- default:
- return -EINVAL;
}
}
static int lp8788_ldo_is_enabled(struct regulator_dev *rdev)
{
struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
- enum lp8788_ldo_id id = rdev_get_id(rdev);
- enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id);
- switch (mode) {
- case EXTPIN:
- return lp8788_ldo_is_enabled_by_extern_pin(ldo);
- case REGISTER:
+ if (ldo->en_pin)
+ return gpio_get_value(ldo->en_pin->gpio) ? 1 : 0;
+ else
return regulator_is_enabled_regmap(rdev);
- default:
- return -EINVAL;
- }
}
static int lp8788_ldo_enable_time(struct regulator_dev *rdev)
@@ -616,10 +535,11 @@ static struct regulator_desc lp8788_aldo_desc[] = {
},
};
-static int lp8788_gpio_request_ldo_en(struct lp8788_ldo *ldo,
+static int lp8788_gpio_request_ldo_en(struct platform_device *pdev,
+ struct lp8788_ldo *ldo,
enum lp8788_ext_ldo_en_id id)
{
- struct device *dev = ldo->lp->dev;
+ struct device *dev = &pdev->dev;
struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
int ret, gpio, pinstate;
char *name[] = {
@@ -647,7 +567,8 @@ static int lp8788_gpio_request_ldo_en(struct lp8788_ldo *ldo,
return ret;
}
-static int lp8788_config_ldo_enable_mode(struct lp8788_ldo *ldo,
+static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
+ struct lp8788_ldo *ldo,
enum lp8788_ldo_id id)
{
int ret;
@@ -693,9 +614,11 @@ static int lp8788_config_ldo_enable_mode(struct lp8788_ldo *ldo,
ldo->en_pin = pdata->ldo_pin[enable_id];
- ret = lp8788_gpio_request_ldo_en(ldo, enable_id);
- if (ret)
+ ret = lp8788_gpio_request_ldo_en(pdev, ldo, enable_id);
+ if (ret) {
+ ldo->en_pin = NULL;
goto set_default_ldo_enable_mode;
+ }
return ret;
@@ -712,16 +635,16 @@ static int lp8788_dldo_probe(struct platform_device *pdev)
struct regulator_dev *rdev;
int ret;
- ldo = devm_kzalloc(lp->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
+ ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
if (!ldo)
return -ENOMEM;
ldo->lp = lp;
- ret = lp8788_config_ldo_enable_mode(ldo, lp8788_dldo_id[id]);
+ ret = lp8788_config_ldo_enable_mode(pdev, ldo, lp8788_dldo_id[id]);
if (ret)
return ret;
- cfg.dev = lp->dev;
+ cfg.dev = pdev->dev.parent;
cfg.init_data = lp->pdata ? lp->pdata->dldo_data[id] : NULL;
cfg.driver_data = ldo;
cfg.regmap = lp->regmap;
@@ -729,7 +652,7 @@ static int lp8788_dldo_probe(struct platform_device *pdev)
rdev = regulator_register(&lp8788_dldo_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
- dev_err(lp->dev, "DLDO%d regulator register err = %d\n",
+ dev_err(&pdev->dev, "DLDO%d regulator register err = %d\n",
id + 1, ret);
return ret;
}
@@ -768,16 +691,16 @@ static int lp8788_aldo_probe(struct platform_device *pdev)
struct regulator_dev *rdev;
int ret;
- ldo = devm_kzalloc(lp->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
+ ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
if (!ldo)
return -ENOMEM;
ldo->lp = lp;
- ret = lp8788_config_ldo_enable_mode(ldo, lp8788_aldo_id[id]);
+ ret = lp8788_config_ldo_enable_mode(pdev, ldo, lp8788_aldo_id[id]);
if (ret)
return ret;
- cfg.dev = lp->dev;
+ cfg.dev = pdev->dev.parent;
cfg.init_data = lp->pdata ? lp->pdata->aldo_data[id] : NULL;
cfg.driver_data = ldo;
cfg.regmap = lp->regmap;
@@ -785,7 +708,7 @@ static int lp8788_aldo_probe(struct platform_device *pdev)
rdev = regulator_register(&lp8788_aldo_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
- dev_err(lp->dev, "ALDO%d regulator register err = %d\n",
+ dev_err(&pdev->dev, "ALDO%d regulator register err = %d\n",
id + 1, ret);
return ret;
}
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index cca18a3c029..e4586ee8858 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -75,13 +75,14 @@ static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int val;
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
- if (rdev->desc->id == MAX77686_BUCK1)
+ if (id == MAX77686_BUCK1)
val = 0x1;
else
val = 0x1 << MAX77686_OPMODE_BUCK234_SHIFT;
- max77686->opmode[rdev->desc->id] = val;
+ max77686->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
val);
@@ -93,9 +94,10 @@ static int max77686_set_suspend_mode(struct regulator_dev *rdev,
{
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
unsigned int val;
+ int id = rdev_get_id(rdev);
/* BUCK[5-9] doesn't support this feature */
- if (rdev->desc->id >= MAX77686_BUCK5)
+ if (id >= MAX77686_BUCK5)
return 0;
switch (mode) {
@@ -111,7 +113,7 @@ static int max77686_set_suspend_mode(struct regulator_dev *rdev,
return -EINVAL;
}
- max77686->opmode[rdev->desc->id] = val;
+ max77686->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
val);
@@ -140,7 +142,7 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,
return -EINVAL;
}
- max77686->opmode[rdev->desc->id] = val;
+ max77686->opmode[rdev_get_id(rdev)] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
val);
@@ -152,7 +154,7 @@ static int max77686_enable(struct regulator_dev *rdev)
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
- max77686->opmode[rdev->desc->id]);
+ max77686->opmode[rdev_get_id(rdev)]);
}
static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c
index d40cf7fdb54..4568c15fa78 100644
--- a/drivers/regulator/max8907-regulator.c
+++ b/drivers/regulator/max8907-regulator.c
@@ -224,11 +224,11 @@ static struct of_regulator_match max8907_matches[] = {
static int max8907_regulator_parse_dt(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.parent->of_node;
- struct device_node *regulators;
+ struct device_node *np, *regulators;
int ret;
- if (!pdev->dev.parent->of_node)
+ np = of_node_get(pdev->dev.parent->of_node);
+ if (!np)
return 0;
regulators = of_find_node_by_name(np, "regulators");
@@ -239,6 +239,7 @@ static int max8907_regulator_parse_dt(struct platform_device *pdev)
ret = of_regulator_match(&pdev->dev, regulators, max8907_matches,
ARRAY_SIZE(max8907_matches));
+ of_node_put(regulators);
if (ret < 0) {
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
ret);
diff --git a/drivers/regulator/max8925-regulator.c b/drivers/regulator/max8925-regulator.c
index 446a8544555..0d5f64a805a 100644
--- a/drivers/regulator/max8925-regulator.c
+++ b/drivers/regulator/max8925-regulator.c
@@ -252,7 +252,7 @@ static int max8925_regulator_dt_init(struct platform_device *pdev,
{
struct device_node *nproot, *np;
int rcount;
- nproot = pdev->dev.parent->of_node;
+ nproot = of_node_get(pdev->dev.parent->of_node);
if (!nproot)
return -ENODEV;
np = of_find_node_by_name(nproot, "regulators");
@@ -263,6 +263,7 @@ static int max8925_regulator_dt_init(struct platform_device *pdev,
rcount = of_regulator_match(&pdev->dev, np,
&max8925_regulator_matches[ridx], 1);
+ of_node_put(np);
if (rcount < 0)
return -ENODEV;
config->init_data = max8925_regulator_matches[ridx].init_data;
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index 836908ce505..0ac7a87519b 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -54,6 +54,13 @@ struct max8997_data {
u8 saved_states[MAX8997_REG_MAX];
};
+static const unsigned int safeoutvolt[] = {
+ 4850000,
+ 4900000,
+ 4950000,
+ 3300000,
+};
+
static inline void max8997_set_gpio(struct max8997_data *max8997)
{
int set3 = (max8997->buck125_gpioindex) & 0x1;
@@ -130,29 +137,6 @@ static const struct voltage_map_desc *reg_voltage_map[] = {
[MAX8997_CHARGER_TOPOFF] = &topoff_current_map_desc,
};
-static int max8997_list_voltage_safeout(struct regulator_dev *rdev,
- unsigned int selector)
-{
- int rid = rdev_get_id(rdev);
-
- if (rid == MAX8997_ESAFEOUT1 || rid == MAX8997_ESAFEOUT2) {
- switch (selector) {
- case 0:
- return 4850000;
- case 1:
- return 4900000;
- case 2:
- return 4950000;
- case 3:
- return 3300000;
- default:
- return -EINVAL;
- }
- }
-
- return -EINVAL;
-}
-
static int max8997_list_voltage_charger_cv(struct regulator_dev *rdev,
unsigned int selector)
{
@@ -522,7 +506,7 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
return ret;
}
-static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev,
+static int max8997_set_voltage_buck_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
@@ -720,49 +704,23 @@ out:
return 0;
}
-static const int safeoutvolt[] = {
- 3300000,
- 4850000,
- 4900000,
- 4950000,
-};
-
/* For SAFEOUT1 and SAFEOUT2 */
-static int max8997_set_voltage_safeout(struct regulator_dev *rdev,
- int min_uV, int max_uV, unsigned *selector)
+static int max8997_set_voltage_safeout_sel(struct regulator_dev *rdev,
+ unsigned selector)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
int rid = rdev_get_id(rdev);
int reg, shift = 0, mask, ret;
- int i = 0;
- u8 val;
if (rid != MAX8997_ESAFEOUT1 && rid != MAX8997_ESAFEOUT2)
return -EINVAL;
- for (i = 0; i < ARRAY_SIZE(safeoutvolt); i++) {
- if (min_uV <= safeoutvolt[i] &&
- max_uV >= safeoutvolt[i])
- break;
- }
-
- if (i >= ARRAY_SIZE(safeoutvolt))
- return -EINVAL;
-
- if (i == 0)
- val = 0x3;
- else
- val = i - 1;
-
ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
if (ret)
return ret;
- ret = max8997_update_reg(i2c, reg, val << shift, mask << shift);
- *selector = val;
-
- return ret;
+ return max8997_update_reg(i2c, reg, selector << shift, mask << shift);
}
static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
@@ -799,7 +757,6 @@ static struct regulator_ops max8997_ldo_ops = {
.disable = max8997_reg_disable,
.get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_ldobuck,
- .set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel,
.set_suspend_disable = max8997_reg_disable_suspend,
};
@@ -810,7 +767,7 @@ static struct regulator_ops max8997_buck_ops = {
.disable = max8997_reg_disable,
.get_voltage_sel = max8997_get_voltage_sel,
.set_voltage = max8997_set_voltage_buck,
- .set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel,
+ .set_voltage_time_sel = max8997_set_voltage_buck_time_sel,
.set_suspend_disable = max8997_reg_disable_suspend,
};
@@ -823,12 +780,12 @@ static struct regulator_ops max8997_fixedvolt_ops = {
};
static struct regulator_ops max8997_safeout_ops = {
- .list_voltage = max8997_list_voltage_safeout,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = max8997_reg_is_enabled,
.enable = max8997_reg_enable,
.disable = max8997_reg_disable,
.get_voltage_sel = max8997_get_voltage_sel,
- .set_voltage = max8997_set_voltage_safeout,
+ .set_voltage_sel = max8997_set_voltage_safeout_sel,
.set_suspend_disable = max8997_reg_disable_suspend,
};
@@ -960,7 +917,7 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
struct max8997_regulator_data *rdata;
unsigned int i, dvs_voltage_nr = 1, ret;
- pmic_np = iodev->dev->of_node;
+ pmic_np = of_node_get(iodev->dev->of_node);
if (!pmic_np) {
dev_err(&pdev->dev, "could not find pmic sub-node\n");
return -ENODEV;
@@ -973,13 +930,12 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
}
/* count the number of regulators to be supported in pmic */
- pdata->num_regulators = 0;
- for_each_child_of_node(regulators_np, reg_np)
- pdata->num_regulators++;
+ pdata->num_regulators = of_get_child_count(regulators_np);
rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
pdata->num_regulators, GFP_KERNEL);
if (!rdata) {
+ of_node_put(regulators_np);
dev_err(&pdev->dev, "could not allocate memory for regulator data\n");
return -ENOMEM;
}
@@ -1002,6 +958,7 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
rdata->reg_node = reg_np;
rdata++;
}
+ of_node_put(regulators_np);
if (of_get_property(pmic_np, "max8997,pmic-buck1-uses-gpio-dvs", NULL))
pdata->buck1_gpiodvs = true;
@@ -1233,13 +1190,15 @@ static int max8997_pmic_probe(struct platform_device *pdev)
int id = pdata->regulators[i].id;
desc = reg_voltage_map[id];
- if (desc)
+ if (desc) {
regulators[id].n_voltages =
(desc->max - desc->min) / desc->step + 1;
- else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2)
- regulators[id].n_voltages = 4;
- else if (id == MAX8997_CHARGER_CV)
+ } else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2) {
+ regulators[id].volt_table = safeoutvolt;
+ regulators[id].n_voltages = ARRAY_SIZE(safeoutvolt);
+ } else if (id == MAX8997_CHARGER_CV) {
regulators[id].n_voltages = 16;
+ }
config.dev = max8997->dev;
config.init_data = pdata->regulators[i].initdata;
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 0a8dd1cbee6..b588f07c7ca 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -311,25 +311,13 @@ static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev,
dev_get_platdata(max8998->iodev->dev);
struct i2c_client *i2c = max8998->iodev->i2c;
int buck = rdev_get_id(rdev);
- int reg, shift = 0, mask, ret;
- int j, previous_sel;
+ int reg, shift = 0, mask, ret, j;
static u8 buck1_last_val;
ret = max8998_get_voltage_register(rdev, &reg, &shift, &mask);
if (ret)
return ret;
- previous_sel = max8998_get_voltage_sel(rdev);
-
- /* Check if voltage needs to be changed */
- /* if previous_voltage equal new voltage, return */
- if (previous_sel == selector) {
- dev_dbg(max8998->dev, "No voltage change, old:%d, new:%d\n",
- regulator_list_voltage_linear(rdev, previous_sel),
- regulator_list_voltage_linear(rdev, selector));
- return ret;
- }
-
switch (buck) {
case MAX8998_BUCK1:
dev_dbg(max8998->dev,
diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c
index 0d84b1f3319..9891aec47b5 100644
--- a/drivers/regulator/mc13892-regulator.c
+++ b/drivers/regulator/mc13892-regulator.c
@@ -164,6 +164,14 @@ static const unsigned int mc13892_sw1[] = {
1350000, 1375000
};
+/*
+ * Note: this table is used to derive SWxVSEL by index into
+ * the array. Offset the values by the index of 1100000uV
+ * to get the actual register value for that voltage selector
+ * if the HI bit is to be set as well.
+ */
+#define MC13892_SWxHI_SEL_OFFSET 20
+
static const unsigned int mc13892_sw[] = {
600000, 625000, 650000, 675000, 700000, 725000,
750000, 775000, 800000, 825000, 850000, 875000,
@@ -239,7 +247,6 @@ static const unsigned int mc13892_pwgtdrv[] = {
};
static struct regulator_ops mc13892_gpo_regulator_ops;
-/* sw regulators need special care due to the "hi bit" */
static struct regulator_ops mc13892_sw_regulator_ops;
@@ -396,7 +403,7 @@ static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
int ret, id = rdev_get_id(rdev);
- unsigned int val;
+ unsigned int val, selector;
dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
@@ -407,12 +414,28 @@ static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev)
if (ret)
return ret;
- val = (val & mc13892_regulators[id].vsel_mask)
- >> mc13892_regulators[id].vsel_shift;
+ /*
+ * Figure out if the HI bit is set inside the switcher mode register
+ * since this means the selector value we return is at a different
+ * offset into the selector table.
+ *
+ * According to the MC13892 documentation note 59 (Table 47) the SW1
+ * buck switcher does not support output range programming therefore
+ * the HI bit must always remain 0. So do not do anything strange if
+ * our register is MC13892_SWITCHERS0.
+ */
+
+ selector = val & mc13892_regulators[id].vsel_mask;
+
+ if ((mc13892_regulators[id].vsel_reg != MC13892_SWITCHERS0) &&
+ (val & MC13892_SWITCHERS0_SWxHI)) {
+ selector += MC13892_SWxHI_SEL_OFFSET;
+ }
- dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val);
+ dev_dbg(rdev_get_dev(rdev), "%s id: %d val: 0x%08x selector: %d\n",
+ __func__, id, val, selector);
- return val;
+ return selector;
}
static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev,
@@ -425,18 +448,35 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev,
volt = rdev->desc->volt_table[selector];
mask = mc13892_regulators[id].vsel_mask;
- reg_value = selector << mc13892_regulators[id].vsel_shift;
-
- if (volt > 1375000) {
- mask |= MC13892_SWITCHERS0_SWxHI;
- reg_value |= MC13892_SWITCHERS0_SWxHI;
- } else if (volt < 1100000) {
- mask |= MC13892_SWITCHERS0_SWxHI;
- reg_value &= ~MC13892_SWITCHERS0_SWxHI;
+ reg_value = selector;
+
+ /*
+ * Don't mess with the HI bit or support HI voltage offsets for SW1.
+ *
+ * Since the get_voltage_sel callback has given a fudged value for
+ * the selector offset, we need to back out that offset if HI is
+ * to be set so we write the correct value to the register.
+ *
+ * The HI bit addition and selector offset handling COULD be more
+ * complicated by shifting and masking off the voltage selector part
+ * of the register then logical OR it back in, but since the selector
+ * is at bits 4:0 there is very little point. This makes the whole
+ * thing more readable and we do far less work.
+ */
+
+ if (mc13892_regulators[id].vsel_reg != MC13892_SWITCHERS0) {
+ if (volt > 1375000) {
+ reg_value -= MC13892_SWxHI_SEL_OFFSET;
+ reg_value |= MC13892_SWITCHERS0_SWxHI;
+ mask |= MC13892_SWITCHERS0_SWxHI;
+ } else if (volt < 1100000) {
+ reg_value &= ~MC13892_SWITCHERS0_SWxHI;
+ mask |= MC13892_SWITCHERS0_SWxHI;
+ }
}
mc13xxx_lock(priv->mc13xxx);
- ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].reg, mask,
+ ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].vsel_reg, mask,
reg_value);
mc13xxx_unlock(priv->mc13xxx);
@@ -495,15 +535,18 @@ static int mc13892_regulator_probe(struct platform_device *pdev)
struct mc13xxx_regulator_init_data *mc13xxx_data;
struct regulator_config config = { };
int i, ret;
- int num_regulators = 0;
+ int num_regulators = 0, num_parsed;
u32 val;
num_regulators = mc13xxx_get_num_regulators_dt(pdev);
+
if (num_regulators <= 0 && pdata)
num_regulators = pdata->num_regulators;
if (num_regulators <= 0)
return -EINVAL;
+ num_parsed = num_regulators;
+
priv = devm_kzalloc(&pdev->dev, sizeof(*priv) +
num_regulators * sizeof(priv->regulators[0]),
GFP_KERNEL);
@@ -520,7 +563,7 @@ static int mc13892_regulator_probe(struct platform_device *pdev)
if (ret)
goto err_unlock;
- /* enable switch auto mode */
+ /* enable switch auto mode (on 2.0A silicon only) */
if ((val & 0x0000FFFF) == 0x45d0) {
ret = mc13xxx_reg_rmw(mc13892, MC13892_SWITCHERS4,
MC13892_SWITCHERS4_SW1MODE_M |
@@ -546,7 +589,39 @@ static int mc13892_regulator_probe(struct platform_device *pdev)
= mc13892_vcam_get_mode;
mc13xxx_data = mc13xxx_parse_regulators_dt(pdev, mc13892_regulators,
- ARRAY_SIZE(mc13892_regulators));
+ ARRAY_SIZE(mc13892_regulators),
+ &num_parsed);
+
+ /*
+ * Perform a little sanity check on the regulator tree - if we found
+ * a number of regulators from mc13xxx_get_num_regulators_dt and
+ * then parsed a smaller number in mc13xxx_parse_regulators_dt then
+ * there is a regulator defined in the regulators node which has
+ * not matched any usable regulator in the driver. In this case,
+ * there is one missing and what will happen is the first regulator
+ * will get registered again.
+ *
+ * Fix this by basically making our number of registerable regulators
+ * equal to the number of regulators we parsed. We are allocating
+ * too much memory for priv, but this is unavoidable at this point.
+ *
+ * As an example of how this can happen, try making a typo in your
+ * regulators node (vviohi {} instead of viohi {}) so that the name
+ * does not match..
+ *
+ * The check will basically pass for platform data (non-DT) because
+ * mc13xxx_parse_regulators_dt for !CONFIG_OF will not touch num_parsed.
+ *
+ */
+ if (num_parsed != num_regulators) {
+ dev_warn(&pdev->dev,
+ "parsed %d != regulators %d - check your device tree!\n",
+ num_parsed, num_regulators);
+
+ num_regulators = num_parsed;
+ priv->num_regulators = num_regulators;
+ }
+
for (i = 0; i < num_regulators; i++) {
struct regulator_init_data *init_data;
struct regulator_desc *desc;
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index 4ed89c65411..23cf9f9c383 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -164,29 +164,30 @@ EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_ops);
#ifdef CONFIG_OF
int mc13xxx_get_num_regulators_dt(struct platform_device *pdev)
{
- struct device_node *parent, *child;
- int num = 0;
+ struct device_node *parent;
+ int num;
of_node_get(pdev->dev.parent->of_node);
parent = of_find_node_by_name(pdev->dev.parent->of_node, "regulators");
if (!parent)
return -ENODEV;
- for_each_child_of_node(parent, child)
- num++;
-
+ num = of_get_child_count(parent);
+ of_node_put(parent);
return num;
}
EXPORT_SYMBOL_GPL(mc13xxx_get_num_regulators_dt);
struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
struct platform_device *pdev, struct mc13xxx_regulator *regulators,
- int num_regulators)
+ int num_regulators, int *num_parsed)
{
struct mc13xxx_regulator_priv *priv = platform_get_drvdata(pdev);
struct mc13xxx_regulator_init_data *data, *p;
struct device_node *parent, *child;
- int i;
+ int i, parsed = 0;
+
+ *num_parsed = 0;
of_node_get(pdev->dev.parent->of_node);
parent = of_find_node_by_name(pdev->dev.parent->of_node, "regulators");
@@ -195,24 +196,32 @@ struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
data = devm_kzalloc(&pdev->dev, sizeof(*data) * priv->num_regulators,
GFP_KERNEL);
- if (!data)
+ if (!data) {
+ of_node_put(parent);
return NULL;
+ }
+
p = data;
for_each_child_of_node(parent, child) {
for (i = 0; i < num_regulators; i++) {
if (!of_node_cmp(child->name,
regulators[i].desc.name)) {
+
p->id = i;
p->init_data = of_get_regulator_init_data(
&pdev->dev, child);
p->node = child;
p++;
+
+ parsed++;
break;
}
}
}
+ of_node_put(parent);
+ *num_parsed = parsed;
return data;
}
EXPORT_SYMBOL_GPL(mc13xxx_parse_regulators_dt);
diff --git a/drivers/regulator/mc13xxx.h b/drivers/regulator/mc13xxx.h
index 06c8903f182..007f83387fd 100644
--- a/drivers/regulator/mc13xxx.h
+++ b/drivers/regulator/mc13xxx.h
@@ -39,7 +39,7 @@ extern int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev,
extern int mc13xxx_get_num_regulators_dt(struct platform_device *pdev);
extern struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
struct platform_device *pdev, struct mc13xxx_regulator *regulators,
- int num_regulators);
+ int num_regulators, int *num_parsed);
#else
static inline int mc13xxx_get_num_regulators_dt(struct platform_device *pdev)
{
@@ -48,7 +48,7 @@ static inline int mc13xxx_get_num_regulators_dt(struct platform_device *pdev)
static inline struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
struct platform_device *pdev, struct mc13xxx_regulator *regulators,
- int num_regulators)
+ int num_regulators, int *num_parsed)
{
return NULL;
}
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index c9e912f583b..cde13bb5a8f 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -527,6 +527,7 @@ static void palmas_dt_to_pdata(struct device *dev,
u32 prop;
int idx, ret;
+ node = of_node_get(node);
regulators = of_find_node_by_name(node, "regulators");
if (!regulators) {
dev_info(dev, "regulator node not found\n");
@@ -535,6 +536,7 @@ static void palmas_dt_to_pdata(struct device *dev,
ret = of_regulator_match(dev, regulators, palmas_matches,
PALMAS_NUM_REGS);
+ of_node_put(regulators);
if (ret < 0) {
dev_err(dev, "Error parsing regulator init data: %d\n", ret);
return;
@@ -566,11 +568,6 @@ static void palmas_dt_to_pdata(struct device *dev,
pdata->reg_init[idx]->mode_sleep = prop;
ret = of_property_read_u32(palmas_matches[idx].of_node,
- "ti,warm_reset", &prop);
- if (!ret)
- pdata->reg_init[idx]->warm_reset = prop;
-
- ret = of_property_read_u32(palmas_matches[idx].of_node,
"ti,tstep", &prop);
if (!ret)
pdata->reg_init[idx]->tstep = prop;
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 33b65c9ad5d..8a831947c35 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -14,6 +14,7 @@
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -21,6 +22,9 @@
#include <linux/regulator/machine.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s5m8767.h>
+#include <linux/regulator/of_regulator.h>
+
+#define S5M8767_OPMODE_NORMAL_MODE 0x1
struct s5m8767_info {
struct device *dev;
@@ -255,10 +259,8 @@ static int s5m8767_reg_disable(struct regulator_dev *rdev)
return sec_reg_update(s5m8767->iodev, reg, ~mask, mask);
}
-static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg)
+static int s5m8767_get_vsel_reg(int reg_id, struct s5m8767_info *s5m8767)
{
- struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
- int reg_id = rdev_get_id(rdev);
int reg;
switch (reg_id) {
@@ -296,43 +298,18 @@ static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg)
return -EINVAL;
}
- *_reg = reg;
-
- return 0;
-}
-
-static int s5m8767_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
- int reg, mask, ret;
- int reg_id = rdev_get_id(rdev);
- unsigned int val;
-
- ret = s5m8767_get_voltage_register(rdev, &reg);
- if (ret)
- return ret;
-
- mask = (reg_id < S5M8767_BUCK1) ? 0x3f : 0xff;
-
- ret = sec_reg_read(s5m8767->iodev, reg, &val);
- if (ret)
- return ret;
-
- val &= mask;
-
- return val;
+ return reg;
}
-static int s5m8767_convert_voltage_to_sel(
- const struct sec_voltage_desc *desc,
- int min_vol, int max_vol)
+static int s5m8767_convert_voltage_to_sel(const struct sec_voltage_desc *desc,
+ int min_vol)
{
int selector = 0;
if (desc == NULL)
return -EINVAL;
- if (max_vol < desc->min || min_vol > desc->max)
+ if (min_vol > desc->max)
return -EINVAL;
if (min_vol < desc->min)
@@ -340,7 +317,7 @@ static int s5m8767_convert_voltage_to_sel(
selector = DIV_ROUND_UP(min_vol - desc->min, desc->step);
- if (desc->min + desc->step * selector > max_vol)
+ if (desc->min + desc->step * selector > desc->max)
return -EINVAL;
return selector;
@@ -373,15 +350,13 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int reg_id = rdev_get_id(rdev);
- int reg, mask, ret = 0, old_index, index = 0;
+ int old_index, index = 0;
u8 *buck234_vol = NULL;
switch (reg_id) {
case S5M8767_LDO1 ... S5M8767_LDO28:
- mask = 0x3f;
break;
case S5M8767_BUCK1 ... S5M8767_BUCK6:
- mask = 0xff;
if (reg_id == S5M8767_BUCK2 && s5m8767->buck2_gpiodvs)
buck234_vol = &s5m8767->buck2_vol[0];
else if (reg_id == S5M8767_BUCK3 && s5m8767->buck3_gpiodvs)
@@ -392,7 +367,6 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
case S5M8767_BUCK7 ... S5M8767_BUCK8:
return -EINVAL;
case S5M8767_BUCK9:
- mask = 0xff;
break;
default:
return -EINVAL;
@@ -412,11 +386,7 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
else
return s5m8767_set_low(s5m8767);
} else {
- ret = s5m8767_get_voltage_register(rdev, &reg);
- if (ret)
- return ret;
-
- return sec_reg_update(s5m8767->iodev, reg, selector, mask);
+ return regulator_set_voltage_sel_regmap(rdev, selector);
}
}
@@ -441,7 +411,7 @@ static struct regulator_ops s5m8767_ops = {
.is_enabled = s5m8767_reg_is_enabled,
.enable = s5m8767_reg_enable,
.disable = s5m8767_reg_disable,
- .get_voltage_sel = s5m8767_get_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = s5m8767_set_voltage_sel,
.set_voltage_time_sel = s5m8767_set_voltage_time_sel,
};
@@ -508,10 +478,182 @@ static struct regulator_desc regulators[] = {
s5m8767_regulator_desc(BUCK9),
};
+#ifdef CONFIG_OF
+static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev,
+ struct sec_platform_data *pdata,
+ struct device_node *pmic_np)
+{
+ int i, gpio;
+
+ for (i = 0; i < 3; i++) {
+ gpio = of_get_named_gpio(pmic_np,
+ "s5m8767,pmic-buck-dvs-gpios", i);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
+ return -EINVAL;
+ }
+ pdata->buck_gpios[i] = gpio;
+ }
+ return 0;
+}
+
+static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev,
+ struct sec_platform_data *pdata,
+ struct device_node *pmic_np)
+{
+ int i, gpio;
+
+ for (i = 0; i < 3; i++) {
+ gpio = of_get_named_gpio(pmic_np,
+ "s5m8767,pmic-buck-ds-gpios", i);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
+ return -EINVAL;
+ }
+ pdata->buck_ds[i] = gpio;
+ }
+ return 0;
+}
+
+static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
+ struct sec_platform_data *pdata)
+{
+ struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *pmic_np, *regulators_np, *reg_np;
+ struct sec_regulator_data *rdata;
+ struct sec_opmode_data *rmode;
+ unsigned int i, dvs_voltage_nr = 1, ret;
+
+ pmic_np = iodev->dev->of_node;
+ if (!pmic_np) {
+ dev_err(iodev->dev, "could not find pmic sub-node\n");
+ return -ENODEV;
+ }
+
+ regulators_np = of_find_node_by_name(pmic_np, "regulators");
+ if (!regulators_np) {
+ dev_err(iodev->dev, "could not find regulators sub-node\n");
+ return -EINVAL;
+ }
+
+ /* count the number of regulators to be supported in pmic */
+ pdata->num_regulators = of_get_child_count(regulators_np);
+
+ rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
+ pdata->num_regulators, GFP_KERNEL);
+ if (!rdata) {
+ dev_err(iodev->dev,
+ "could not allocate memory for regulator data\n");
+ return -ENOMEM;
+ }
+
+ rmode = devm_kzalloc(&pdev->dev, sizeof(*rmode) *
+ pdata->num_regulators, GFP_KERNEL);
+ if (!rdata) {
+ dev_err(iodev->dev,
+ "could not allocate memory for regulator mode\n");
+ return -ENOMEM;
+ }
+
+ pdata->regulators = rdata;
+ pdata->opmode = rmode;
+ for_each_child_of_node(regulators_np, reg_np) {
+ for (i = 0; i < ARRAY_SIZE(regulators); i++)
+ if (!of_node_cmp(reg_np->name, regulators[i].name))
+ break;
+
+ if (i == ARRAY_SIZE(regulators)) {
+ dev_warn(iodev->dev,
+ "don't know how to configure regulator %s\n",
+ reg_np->name);
+ continue;
+ }
+
+ rdata->id = i;
+ rdata->initdata = of_get_regulator_init_data(
+ &pdev->dev, reg_np);
+ rdata->reg_node = reg_np;
+ rdata++;
+ rmode->id = i;
+ if (of_property_read_u32(reg_np, "op_mode",
+ &rmode->mode)) {
+ dev_warn(iodev->dev,
+ "no op_mode property property at %s\n",
+ reg_np->full_name);
+
+ rmode->mode = S5M8767_OPMODE_NORMAL_MODE;
+ }
+ rmode++;
+ }
+
+ if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL))
+ pdata->buck2_gpiodvs = true;
+
+ if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL))
+ pdata->buck3_gpiodvs = true;
+
+ if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL))
+ pdata->buck4_gpiodvs = true;
+
+ if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
+ pdata->buck4_gpiodvs) {
+ ret = s5m8767_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
+ if (ret)
+ return -EINVAL;
+
+ if (of_property_read_u32(pmic_np,
+ "s5m8767,pmic-buck-default-dvs-idx",
+ &pdata->buck_default_idx)) {
+ pdata->buck_default_idx = 0;
+ } else {
+ if (pdata->buck_default_idx >= 8) {
+ pdata->buck_default_idx = 0;
+ dev_info(iodev->dev,
+ "invalid value for default dvs index, use 0\n");
+ }
+ }
+ dvs_voltage_nr = 8;
+ }
+
+ ret = s5m8767_pmic_dt_parse_ds_gpio(iodev, pdata, pmic_np);
+ if (ret)
+ return -EINVAL;
+
+ if (of_property_read_u32_array(pmic_np,
+ "s5m8767,pmic-buck2-dvs-voltage",
+ pdata->buck2_voltage, dvs_voltage_nr)) {
+ dev_err(iodev->dev, "buck2 voltages not specified\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32_array(pmic_np,
+ "s5m8767,pmic-buck3-dvs-voltage",
+ pdata->buck3_voltage, dvs_voltage_nr)) {
+ dev_err(iodev->dev, "buck3 voltages not specified\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32_array(pmic_np,
+ "s5m8767,pmic-buck4-dvs-voltage",
+ pdata->buck4_voltage, dvs_voltage_nr)) {
+ dev_err(iodev->dev, "buck4 voltages not specified\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#else
+static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
+ struct sec_platform_data *pdata)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
static int s5m8767_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct sec_platform_data *pdata = iodev->pdata;
struct regulator_config config = { };
struct regulator_dev **rdev;
struct s5m8767_info *s5m8767;
@@ -522,6 +664,12 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
return -ENODEV;
}
+ if (iodev->dev->of_node) {
+ ret = s5m8767_pmic_dt_parse_pdata(pdev, pdata);
+ if (ret)
+ return ret;
+ }
+
if (pdata->buck2_gpiodvs) {
if (pdata->buck3_gpiodvs || pdata->buck4_gpiodvs) {
dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
@@ -577,23 +725,17 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
s5m8767->opmode = pdata->opmode;
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
- pdata->buck2_init,
- pdata->buck2_init +
- buck_voltage_val2.step);
+ pdata->buck2_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS2, buck_init);
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
- pdata->buck3_init,
- pdata->buck3_init +
- buck_voltage_val2.step);
+ pdata->buck3_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS2, buck_init);
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
- pdata->buck4_init,
- pdata->buck4_init +
- buck_voltage_val2.step);
+ pdata->buck4_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS2, buck_init);
@@ -602,27 +744,21 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
s5m8767->buck2_vol[i] =
s5m8767_convert_voltage_to_sel(
&buck_voltage_val2,
- pdata->buck2_voltage[i],
- pdata->buck2_voltage[i] +
- buck_voltage_val2.step);
+ pdata->buck2_voltage[i]);
}
if (s5m8767->buck3_gpiodvs) {
s5m8767->buck3_vol[i] =
s5m8767_convert_voltage_to_sel(
&buck_voltage_val2,
- pdata->buck3_voltage[i],
- pdata->buck3_voltage[i] +
- buck_voltage_val2.step);
+ pdata->buck3_voltage[i]);
}
if (s5m8767->buck4_gpiodvs) {
s5m8767->buck4_vol[i] =
s5m8767_convert_voltage_to_sel(
&buck_voltage_val2,
- pdata->buck4_voltage[i],
- pdata->buck4_voltage[i] +
- buck_voltage_val2.step);
+ pdata->buck4_voltage[i]);
}
}
@@ -760,11 +896,19 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
(desc->max - desc->min) / desc->step + 1;
regulators[id].min_uV = desc->min;
regulators[id].uV_step = desc->step;
+ regulators[id].vsel_reg =
+ s5m8767_get_vsel_reg(id, s5m8767);
+ if (id < S5M8767_BUCK1)
+ regulators[id].vsel_mask = 0x3f;
+ else
+ regulators[id].vsel_mask = 0xff;
}
config.dev = s5m8767->dev;
config.init_data = pdata->regulators[i].initdata;
config.driver_data = s5m8767;
+ config.regmap = iodev->regmap;
+ config.of_node = pdata->regulators[i].reg_node;
rdev[i] = regulator_register(&regulators[id], &config);
if (IS_ERR(rdev[i])) {
diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c
index ab21133e678..6e67be75ea1 100644
--- a/drivers/regulator/tps51632-regulator.c
+++ b/drivers/regulator/tps51632-regulator.c
@@ -28,10 +28,13 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/regulator/tps51632-regulator.h>
#include <linux/slab.h>
@@ -85,49 +88,8 @@ struct tps51632_chip {
struct regulator_desc desc;
struct regulator_dev *rdev;
struct regmap *regmap;
- bool enable_pwm_dvfs;
};
-static int tps51632_dcdc_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct tps51632_chip *tps = rdev_get_drvdata(rdev);
- unsigned int data;
- int ret;
- unsigned int reg = TPS51632_VOLTAGE_SELECT_REG;
- int vsel;
-
- if (tps->enable_pwm_dvfs)
- reg = TPS51632_VOLTAGE_BASE_REG;
-
- ret = regmap_read(tps->regmap, reg, &data);
- if (ret < 0) {
- dev_err(tps->dev, "reg read failed, err %d\n", ret);
- return ret;
- }
-
- vsel = data & TPS51632_VOUT_MASK;
- return vsel;
-}
-
-static int tps51632_dcdc_set_voltage_sel(struct regulator_dev *rdev,
- unsigned selector)
-{
- struct tps51632_chip *tps = rdev_get_drvdata(rdev);
- int ret;
- unsigned int reg = TPS51632_VOLTAGE_SELECT_REG;
-
- if (tps->enable_pwm_dvfs)
- reg = TPS51632_VOLTAGE_BASE_REG;
-
- if (selector > TPS51632_MAX_VSEL)
- return -EINVAL;
-
- ret = regmap_write(tps->regmap, reg, selector);
- if (ret < 0)
- dev_err(tps->dev, "reg write failed, err %d\n", ret);
- return ret;
-}
-
static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev,
int ramp_delay)
{
@@ -144,8 +106,8 @@ static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev,
}
static struct regulator_ops tps51632_dcdc_ops = {
- .get_voltage_sel = tps51632_dcdc_get_voltage_sel,
- .set_voltage_sel = tps51632_dcdc_set_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = tps51632_dcdc_set_ramp_delay,
@@ -162,7 +124,6 @@ static int tps51632_init_dcdc(struct tps51632_chip *tps,
goto skip_pwm_config;
control |= TPS51632_DVFS_PWMEN;
- tps->enable_pwm_dvfs = pdata->enable_pwm_dvfs;
vsel = TPS51632_VOLT_VSEL(pdata->base_voltage_uV);
ret = regmap_write(tps->regmap, TPS51632_VOLTAGE_BASE_REG, vsel);
if (ret < 0) {
@@ -205,22 +166,96 @@ skip_pwm_config:
return ret;
}
-static bool rd_wr_reg(struct device *dev, unsigned int reg)
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case TPS51632_OFFSET_REG:
+ case TPS51632_FAULT_REG:
+ case TPS51632_IMON_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool is_read_reg(struct device *dev, unsigned int reg)
{
- if ((reg >= 0x8) && (reg <= 0x10))
+ switch (reg) {
+ case 0x08 ... 0x0F:
return false;
- return true;
+ default:
+ return true;
+ }
+}
+
+static bool is_write_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case TPS51632_VOLTAGE_SELECT_REG:
+ case TPS51632_VOLTAGE_BASE_REG:
+ case TPS51632_VMAX_REG:
+ case TPS51632_DVFS_CONTROL_REG:
+ case TPS51632_POWER_STATE_REG:
+ case TPS51632_SLEW_REGS:
+ return true;
+ default:
+ return false;
+ }
}
static const struct regmap_config tps51632_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
- .writeable_reg = rd_wr_reg,
- .readable_reg = rd_wr_reg,
+ .writeable_reg = is_write_reg,
+ .readable_reg = is_read_reg,
+ .volatile_reg = is_volatile_reg,
.max_register = TPS51632_MAX_REG - 1,
.cache_type = REGCACHE_RBTREE,
};
+#if defined(CONFIG_OF)
+static const struct of_device_id tps51632_of_match[] = {
+ { .compatible = "ti,tps51632",},
+ {},
+};
+MODULE_DEVICE_TABLE(of, tps51632_of_match);
+
+static struct tps51632_regulator_platform_data *
+ of_get_tps51632_platform_data(struct device *dev)
+{
+ struct tps51632_regulator_platform_data *pdata;
+ struct device_node *np = dev->of_node;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "Memory alloc failed for platform data\n");
+ return NULL;
+ }
+
+ pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node);
+ if (!pdata->reg_init_data) {
+ dev_err(dev, "Not able to get OF regulator init data\n");
+ return NULL;
+ }
+
+ pdata->enable_pwm_dvfs =
+ of_property_read_bool(np, "ti,enable-pwm-dvfs");
+ pdata->dvfs_step_20mV = of_property_read_bool(np, "ti,dvfs-step-20mV");
+
+ pdata->base_voltage_uV = pdata->reg_init_data->constraints.min_uV ? :
+ TPS51632_MIN_VOLATGE;
+ pdata->max_voltage_uV = pdata->reg_init_data->constraints.max_uV ? :
+ TPS51632_MAX_VOLATGE;
+ return pdata;
+}
+#else
+static struct tps51632_regulator_platform_data *
+ of_get_tps51632_platform_data(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
static int tps51632_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -230,7 +265,19 @@ static int tps51632_probe(struct i2c_client *client,
int ret;
struct regulator_config config = { };
+ if (client->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_device(of_match_ptr(tps51632_of_match),
+ &client->dev);
+ if (!match) {
+ dev_err(&client->dev, "Error: No device match found\n");
+ return -ENODEV;
+ }
+ }
+
pdata = client->dev.platform_data;
+ if (!pdata && client->dev.of_node)
+ pdata = of_get_tps51632_platform_data(&client->dev);
if (!pdata) {
dev_err(&client->dev, "No Platform data\n");
return -EINVAL;
@@ -269,6 +316,12 @@ static int tps51632_probe(struct i2c_client *client,
tps->desc.type = REGULATOR_VOLTAGE;
tps->desc.owner = THIS_MODULE;
+ if (pdata->enable_pwm_dvfs)
+ tps->desc.vsel_reg = TPS51632_VOLTAGE_BASE_REG;
+ else
+ tps->desc.vsel_reg = TPS51632_VOLTAGE_SELECT_REG;
+ tps->desc.vsel_mask = TPS51632_VOUT_MASK;
+
tps->regmap = devm_regmap_init_i2c(client, &tps51632_regmap_config);
if (IS_ERR(tps->regmap)) {
ret = PTR_ERR(tps->regmap);
@@ -319,6 +372,7 @@ static struct i2c_driver tps51632_i2c_driver = {
.driver = {
.name = "tps51632",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(tps51632_of_match),
},
.probe = tps51632_probe,
.remove = tps51632_remove,
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index 0233cfb5656..54aa2da7283 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -23,8 +23,10 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/tps6507x.h>
+#include <linux/of.h>
#include <linux/slab.h>
#include <linux/mfd/tps6507x.h>
+#include <linux/regulator/of_regulator.h>
/* DCDC's */
#define TPS6507X_DCDC_1 0
@@ -356,6 +358,80 @@ static struct regulator_ops tps6507x_pmic_ops = {
.list_voltage = regulator_list_voltage_table,
};
+#ifdef CONFIG_OF
+static struct of_regulator_match tps6507x_matches[] = {
+ { .name = "VDCDC1"},
+ { .name = "VDCDC2"},
+ { .name = "VDCDC3"},
+ { .name = "LDO1"},
+ { .name = "LDO2"},
+};
+
+static struct tps6507x_board *tps6507x_parse_dt_reg_data(
+ struct platform_device *pdev,
+ struct of_regulator_match **tps6507x_reg_matches)
+{
+ struct tps6507x_board *tps_board;
+ struct device_node *np = pdev->dev.parent->of_node;
+ struct device_node *regulators;
+ struct of_regulator_match *matches;
+ static struct regulator_init_data *reg_data;
+ int idx = 0, count, ret;
+
+ tps_board = devm_kzalloc(&pdev->dev, sizeof(*tps_board),
+ GFP_KERNEL);
+ if (!tps_board) {
+ dev_err(&pdev->dev, "Failure to alloc pdata for regulators.\n");
+ return NULL;
+ }
+
+ regulators = of_find_node_by_name(np, "regulators");
+ if (!regulators) {
+ dev_err(&pdev->dev, "regulator node not found\n");
+ return NULL;
+ }
+
+ count = ARRAY_SIZE(tps6507x_matches);
+ matches = tps6507x_matches;
+
+ ret = of_regulator_match(&pdev->dev, regulators, matches, count);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
+ ret);
+ return NULL;
+ }
+
+ *tps6507x_reg_matches = matches;
+
+ reg_data = devm_kzalloc(&pdev->dev, (sizeof(struct regulator_init_data)
+ * TPS6507X_NUM_REGULATOR), GFP_KERNEL);
+ if (!reg_data) {
+ dev_err(&pdev->dev, "Failure to alloc init data for regulators.\n");
+ return NULL;
+ }
+
+ tps_board->tps6507x_pmic_init_data = reg_data;
+
+ for (idx = 0; idx < count; idx++) {
+ if (!matches[idx].init_data || !matches[idx].of_node)
+ continue;
+
+ memcpy(&reg_data[idx], matches[idx].init_data,
+ sizeof(struct regulator_init_data));
+
+ }
+
+ return tps_board;
+}
+#else
+static inline struct tps6507x_board *tps6507x_parse_dt_reg_data(
+ struct platform_device *pdev,
+ struct of_regulator_match **tps6507x_reg_matches)
+{
+ *tps6507x_reg_matches = NULL;
+ return NULL;
+}
+#endif
static int tps6507x_pmic_probe(struct platform_device *pdev)
{
struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
@@ -365,8 +441,10 @@ static int tps6507x_pmic_probe(struct platform_device *pdev)
struct regulator_dev *rdev;
struct tps6507x_pmic *tps;
struct tps6507x_board *tps_board;
+ struct of_regulator_match *tps6507x_reg_matches = NULL;
int i;
int error;
+ unsigned int prop;
/**
* tps_board points to pmic related constants
@@ -374,6 +452,9 @@ static int tps6507x_pmic_probe(struct platform_device *pdev)
*/
tps_board = dev_get_platdata(tps6507x_dev->dev);
+ if (!tps_board && tps6507x_dev->dev->of_node)
+ tps_board = tps6507x_parse_dt_reg_data(pdev,
+ &tps6507x_reg_matches);
if (!tps_board)
return -EINVAL;
@@ -415,6 +496,17 @@ static int tps6507x_pmic_probe(struct platform_device *pdev)
config.init_data = init_data;
config.driver_data = tps;
+ if (tps6507x_reg_matches) {
+ error = of_property_read_u32(
+ tps6507x_reg_matches[i].of_node,
+ "ti,defdcdc_default", &prop);
+
+ if (!error)
+ tps->info[i]->defdcdc_default = prop;
+
+ config.of_node = tps6507x_reg_matches[i].of_node;
+ }
+
rdev = regulator_register(&tps->desc[i], &config);
if (IS_ERR(rdev)) {
dev_err(tps6507x_dev->dev,
diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index 41c391789c9..c8e70451df3 100644
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -19,11 +19,13 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
#include <linux/mfd/tps65090.h>
struct tps65090_regulator {
@@ -67,8 +69,8 @@ static struct regulator_desc tps65090_regulator_desc[] = {
tps65090_REG_DESC(FET5, "infet5", 0x13, tps65090_reg_contol_ops),
tps65090_REG_DESC(FET6, "infet6", 0x14, tps65090_reg_contol_ops),
tps65090_REG_DESC(FET7, "infet7", 0x15, tps65090_reg_contol_ops),
- tps65090_REG_DESC(LDO1, "vsys_l1", 0, tps65090_ldo_ops),
- tps65090_REG_DESC(LDO2, "vsys_l2", 0, tps65090_ldo_ops),
+ tps65090_REG_DESC(LDO1, "vsys-l1", 0, tps65090_ldo_ops),
+ tps65090_REG_DESC(LDO2, "vsys-l2", 0, tps65090_ldo_ops),
};
static inline bool is_dcdc(int id)
@@ -138,6 +140,92 @@ static void tps65090_configure_regulator_config(
}
}
+#ifdef CONFIG_OF
+static struct of_regulator_match tps65090_matches[] = {
+ { .name = "dcdc1", },
+ { .name = "dcdc2", },
+ { .name = "dcdc3", },
+ { .name = "fet1", },
+ { .name = "fet2", },
+ { .name = "fet3", },
+ { .name = "fet4", },
+ { .name = "fet5", },
+ { .name = "fet6", },
+ { .name = "fet7", },
+ { .name = "ldo1", },
+ { .name = "ldo2", },
+};
+
+static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
+ struct platform_device *pdev,
+ struct of_regulator_match **tps65090_reg_matches)
+{
+ struct tps65090_platform_data *tps65090_pdata;
+ struct device_node *np = pdev->dev.parent->of_node;
+ struct device_node *regulators;
+ int idx = 0, ret;
+ struct tps65090_regulator_plat_data *reg_pdata;
+
+ tps65090_pdata = devm_kzalloc(&pdev->dev, sizeof(*tps65090_pdata),
+ GFP_KERNEL);
+ if (!tps65090_pdata) {
+ dev_err(&pdev->dev, "Memory alloc for tps65090_pdata failed\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ reg_pdata = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX *
+ sizeof(*reg_pdata), GFP_KERNEL);
+ if (!reg_pdata) {
+ dev_err(&pdev->dev, "Memory alloc for reg_pdata failed\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ regulators = of_find_node_by_name(np, "regulators");
+ if (!regulators) {
+ dev_err(&pdev->dev, "regulator node not found\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ ret = of_regulator_match(&pdev->dev, regulators, tps65090_matches,
+ ARRAY_SIZE(tps65090_matches));
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "Error parsing regulator init data: %d\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ *tps65090_reg_matches = tps65090_matches;
+ for (idx = 0; idx < ARRAY_SIZE(tps65090_matches); idx++) {
+ struct regulator_init_data *ri_data;
+ struct tps65090_regulator_plat_data *rpdata;
+
+ rpdata = &reg_pdata[idx];
+ ri_data = tps65090_matches[idx].init_data;
+ if (!ri_data || !tps65090_matches[idx].of_node)
+ continue;
+
+ rpdata->reg_init_data = ri_data;
+ rpdata->enable_ext_control = of_property_read_bool(
+ tps65090_matches[idx].of_node,
+ "ti,enable-ext-control");
+ if (rpdata->enable_ext_control)
+ rpdata->gpio = of_get_named_gpio(np,
+ "dcdc-ext-control-gpios", 0);
+
+ tps65090_pdata->reg_pdata[idx] = rpdata;
+ }
+ return tps65090_pdata;
+}
+#else
+static inline struct tps65090_platform_data *tps65090_parse_dt_reg_data(
+ struct platform_device *pdev,
+ struct of_regulator_match **tps65090_reg_matches)
+{
+ *tps65090_reg_matches = NULL;
+ return NULL;
+}
+#endif
+
static int tps65090_regulator_probe(struct platform_device *pdev)
{
struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent);
@@ -147,15 +235,19 @@ static int tps65090_regulator_probe(struct platform_device *pdev)
struct tps65090_regulator_plat_data *tps_pdata;
struct tps65090_regulator *pmic;
struct tps65090_platform_data *tps65090_pdata;
+ struct of_regulator_match *tps65090_reg_matches = NULL;
int num;
int ret;
dev_dbg(&pdev->dev, "Probing regulator\n");
tps65090_pdata = dev_get_platdata(pdev->dev.parent);
- if (!tps65090_pdata) {
+ if (!tps65090_pdata && tps65090_mfd->dev->of_node)
+ tps65090_pdata = tps65090_parse_dt_reg_data(pdev,
+ &tps65090_reg_matches);
+ if (IS_ERR_OR_NULL(tps65090_pdata)) {
dev_err(&pdev->dev, "Platform data missing\n");
- return -EINVAL;
+ return tps65090_pdata ? PTR_ERR(tps65090_pdata) : -EINVAL;
}
pmic = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * sizeof(*pmic),
@@ -192,13 +284,17 @@ static int tps65090_regulator_probe(struct platform_device *pdev)
}
}
- config.dev = &pdev->dev;
+ config.dev = pdev->dev.parent;
config.driver_data = ri;
config.regmap = tps65090_mfd->rmap;
if (tps_pdata)
config.init_data = tps_pdata->reg_init_data;
else
config.init_data = NULL;
+ if (tps65090_reg_matches)
+ config.of_node = tps65090_reg_matches[num].of_node;
+ else
+ config.of_node = NULL;
rdev = regulator_register(ri->desc, &config);
if (IS_ERR(rdev)) {
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index f86da672c75..e68382d0e1e 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -61,10 +61,6 @@ struct tps6586x_regulator {
int enable_bit[2];
int enable_reg[2];
-
- /* for DVM regulators */
- int go_reg;
- int go_bit;
};
static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
@@ -72,37 +68,10 @@ static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
return rdev_get_dev(rdev)->parent;
}
-static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
- unsigned selector)
-{
- struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
- struct device *parent = to_tps6586x_dev(rdev);
- int ret, val, rid = rdev_get_id(rdev);
- uint8_t mask;
-
- val = selector << (ffs(rdev->desc->vsel_mask) - 1);
- mask = rdev->desc->vsel_mask;
-
- ret = tps6586x_update(parent, rdev->desc->vsel_reg, val, mask);
- if (ret)
- return ret;
-
- /* Update go bit for DVM regulators */
- switch (rid) {
- case TPS6586X_ID_LDO_2:
- case TPS6586X_ID_LDO_4:
- case TPS6586X_ID_SM_0:
- case TPS6586X_ID_SM_1:
- ret = tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit);
- break;
- }
- return ret;
-}
-
static struct regulator_ops tps6586x_regulator_ops = {
.list_voltage = regulator_list_voltage_table,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = tps6586x_set_voltage_sel,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
@@ -142,7 +111,7 @@ static const unsigned int tps6586x_dvm_voltages[] = {
};
#define TPS6586X_REGULATOR(_id, _pin_name, vdata, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1) \
+ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
.desc = { \
.supply_name = _pin_name, \
.name = "REG-" #_id, \
@@ -156,29 +125,26 @@ static const unsigned int tps6586x_dvm_voltages[] = {
.enable_mask = 1 << (ebit0), \
.vsel_reg = TPS6586X_##vreg, \
.vsel_mask = ((1 << (nbits)) - 1) << (shift), \
+ .apply_reg = (goreg), \
+ .apply_bit = (gobit), \
}, \
.enable_reg[0] = TPS6586X_SUPPLY##ereg0, \
.enable_bit[0] = (ebit0), \
.enable_reg[1] = TPS6586X_SUPPLY##ereg1, \
.enable_bit[1] = (ebit1),
-#define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
- .go_reg = TPS6586X_##goreg, \
- .go_bit = (gobit),
-
#define TPS6586X_LDO(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
{ \
TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1) \
+ ereg0, ebit0, ereg1, ebit1, 0, 0) \
}
#define TPS6586X_DVM(_id, _pname, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
{ \
TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1) \
- TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
+ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
}
#define TPS6586X_SYS_REGULATOR() \
@@ -207,13 +173,13 @@ static struct tps6586x_regulator tps6586x_regulator[] = {
TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3,
- ENB, 3, VCC2, 6),
+ ENB, 3, TPS6586X_VCC2, BIT(6)),
TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3,
- END, 3, VCC1, 6),
+ END, 3, TPS6586X_VCC1, BIT(6)),
TPS6586X_DVM(SM_0, "vin-sm0", dvm, SM0V1, 0, 5, ENA, 1,
- ENB, 1, VCC1, 2),
+ ENB, 1, TPS6586X_VCC1, BIT(2)),
TPS6586X_DVM(SM_1, "vin-sm1", dvm, SM1V1, 0, 5, ENA, 0,
- ENB, 0, VCC1, 0),
+ ENB, 0, TPS6586X_VCC1, BIT(0)),
};
/*
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index b0e4c0bc85c..6ba6931ac85 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -964,8 +964,7 @@ static struct tps65910_board *tps65910_parse_dt_reg_data(
{
struct tps65910_board *pmic_plat_data;
struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent);
- struct device_node *np = pdev->dev.parent->of_node;
- struct device_node *regulators;
+ struct device_node *np, *regulators;
struct of_regulator_match *matches;
unsigned int prop;
int idx = 0, ret, count;
@@ -978,6 +977,7 @@ static struct tps65910_board *tps65910_parse_dt_reg_data(
return NULL;
}
+ np = of_node_get(pdev->dev.parent->of_node);
regulators = of_find_node_by_name(np, "regulators");
if (!regulators) {
dev_err(&pdev->dev, "regulator node not found\n");
@@ -994,11 +994,13 @@ static struct tps65910_board *tps65910_parse_dt_reg_data(
matches = tps65911_matches;
break;
default:
+ of_node_put(regulators);
dev_err(&pdev->dev, "Invalid tps chip version\n");
return NULL;
}
ret = of_regulator_match(&pdev->dev, regulators, matches, count);
+ of_node_put(regulators);
if (ret < 0) {
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
ret);
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index b50c38f8bc4..f0f4de3b4cc 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -26,6 +26,7 @@ enum sec_device_type {
/**
* struct sec_pmic_dev - s5m87xx master device for sub-drivers
* @dev: master device of the chip (can be used to access platform data)
+ * @pdata: pointer to private data used to pass platform data to child
* @i2c: i2c client private data for regulator
* @rtc: i2c client private data for rtc
* @iolock: mutex for serializing io access
@@ -39,6 +40,7 @@ enum sec_device_type {
*/
struct sec_pmic_dev {
struct device *dev;
+ struct sec_platform_data *pdata;
struct regmap *regmap;
struct i2c_client *i2c;
struct i2c_client *rtc;
@@ -82,11 +84,11 @@ struct sec_platform_data {
int buck_gpios[3];
int buck_ds[3];
- int buck2_voltage[8];
+ unsigned int buck2_voltage[8];
bool buck2_gpiodvs;
- int buck3_voltage[8];
+ unsigned int buck3_voltage[8];
bool buck3_gpiodvs;
- int buck4_voltage[8];
+ unsigned int buck4_voltage[8];
bool buck4_gpiodvs;
int buck_set1;
@@ -127,6 +129,7 @@ struct sec_platform_data {
struct sec_regulator_data {
int id;
struct regulator_init_data *initdata;
+ struct device_node *reg_node;
};
/*
@@ -136,7 +139,7 @@ struct sec_regulator_data {
*/
struct sec_opmode_data {
int id;
- int mode;
+ unsigned int mode;
};
/*
diff --git a/include/linux/platform_data/lp8755.h b/include/linux/platform_data/lp8755.h
new file mode 100644
index 00000000000..a7fd0776c9b
--- /dev/null
+++ b/include/linux/platform_data/lp8755.h
@@ -0,0 +1,71 @@
+/*
+ * LP8755 High Performance Power Management Unit Driver:System Interface Driver
+ *
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com>
+ * G.Shark Jeong <gshark.jeong@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _LP8755_H
+#define _LP8755_H
+
+#include <linux/regulator/consumer.h>
+
+#define LP8755_NAME "lp8755-regulator"
+/*
+ *PWR FAULT : power fault detected
+ *OCP : over current protect activated
+ *OVP : over voltage protect activated
+ *TEMP_WARN : thermal warning
+ *TEMP_SHDN : thermal shutdonw detected
+ *I_LOAD : current measured
+ */
+#define LP8755_EVENT_PWR_FAULT REGULATOR_EVENT_FAIL
+#define LP8755_EVENT_OCP REGULATOR_EVENT_OVER_CURRENT
+#define LP8755_EVENT_OVP 0x10000
+#define LP8755_EVENT_TEMP_WARN 0x2000
+#define LP8755_EVENT_TEMP_SHDN REGULATOR_EVENT_OVER_TEMP
+#define LP8755_EVENT_I_LOAD 0x40000
+
+enum lp8755_bucks {
+ LP8755_BUCK0 = 0,
+ LP8755_BUCK1,
+ LP8755_BUCK2,
+ LP8755_BUCK3,
+ LP8755_BUCK4,
+ LP8755_BUCK5,
+ LP8755_BUCK_MAX,
+};
+
+/**
+ * multiphase configuration options
+ */
+enum lp8755_mphase_config {
+ MPHASE_CONF0,
+ MPHASE_CONF1,
+ MPHASE_CONF2,
+ MPHASE_CONF3,
+ MPHASE_CONF4,
+ MPHASE_CONF5,
+ MPHASE_CONF6,
+ MPHASE_CONF7,
+ MPHASE_CONF8,
+ MPHASE_CONF_MAX
+};
+
+/**
+ * struct lp8755_platform_data
+ * @mphase_type : Multiphase Switcher Configurations.
+ * @buck_data : buck0~6 init voltage in uV
+ */
+struct lp8755_platform_data {
+ int mphase;
+ struct regulator_init_data *buck_data[LP8755_BUCK_MAX];
+};
+#endif
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index d10bb0f39c5..23070fd8387 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -193,6 +193,10 @@ enum regulator_type {
*
* @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
* @vsel_mask: Mask for register bitfield used for selector
+ * @apply_reg: Register for initiate voltage change on the output when
+ * using regulator_set_voltage_sel_regmap
+ * @apply_bit: Register bitfield used for initiate voltage change on the
+ * output when using regulator_set_voltage_sel_regmap
* @enable_reg: Register for control when using regmap enable/disable ops
* @enable_mask: Mask for control when using regmap enable/disable ops
*
@@ -218,6 +222,8 @@ struct regulator_desc {
unsigned int vsel_reg;
unsigned int vsel_mask;
+ unsigned int apply_reg;
+ unsigned int apply_bit;
unsigned int enable_reg;
unsigned int enable_mask;
unsigned int bypass_reg;
diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c
index 1440b3f9b7b..988e817dca0 100644
--- a/sound/soc/codecs/wm5102.c
+++ b/sound/soc/codecs/wm5102.c
@@ -1152,6 +1152,8 @@ SND_SOC_DAPM_OUTPUT("SPKOUTRN"),
SND_SOC_DAPM_OUTPUT("SPKOUTRP"),
SND_SOC_DAPM_OUTPUT("SPKDAT1L"),
SND_SOC_DAPM_OUTPUT("SPKDAT1R"),
+
+SND_SOC_DAPM_OUTPUT("MICSUPP"),
};
#define ARIZONA_MIXER_INPUT_ROUTES(name) \
@@ -1364,6 +1366,8 @@ static const struct snd_soc_dapm_route wm5102_dapm_routes[] = {
{ "AEC Loopback", "SPKDAT1R", "OUT5R" },
{ "SPKDAT1L", NULL, "OUT5L" },
{ "SPKDAT1R", NULL, "OUT5R" },
+
+ { "MICSUPP", NULL, "SYSCLK" },
};
static int wm5102_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index 7a090968c4f..0320a32670d 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -624,6 +624,8 @@ SND_SOC_DAPM_OUTPUT("SPKDAT1L"),
SND_SOC_DAPM_OUTPUT("SPKDAT1R"),
SND_SOC_DAPM_OUTPUT("SPKDAT2L"),
SND_SOC_DAPM_OUTPUT("SPKDAT2R"),
+
+SND_SOC_DAPM_OUTPUT("MICSUPP"),
};
#define ARIZONA_MIXER_INPUT_ROUTES(name) \
@@ -832,6 +834,8 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = {
{ "SPKDAT2L", NULL, "OUT6L" },
{ "SPKDAT2R", NULL, "OUT6R" },
+
+ { "MICSUPP", NULL, "SYSCLK" },
};
static int wm5110_set_fll(struct snd_soc_codec *codec, int fll_id, int source,