aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/kbuild/kconfig-language.txt23
-rw-r--r--Documentation/kbuild/kconfig.txt6
-rw-r--r--scripts/kconfig/Makefile3
-rw-r--r--scripts/kconfig/conf.c7
-rw-r--r--scripts/kconfig/expr.c10
-rw-r--r--scripts/kconfig/gconf.c2
-rw-r--r--scripts/kconfig/lkc.h8
-rw-r--r--scripts/kconfig/lxdialog/check-lxdialog.sh1
-rw-r--r--scripts/kconfig/lxdialog/dialog.h1
-rw-r--r--scripts/kconfig/lxdialog/inputbox.c121
-rw-r--r--scripts/kconfig/lxdialog/menubox.c20
-rw-r--r--scripts/kconfig/mconf.c54
-rw-r--r--scripts/kconfig/menu.c4
-rwxr-xr-xscripts/kconfig/merge_config.sh20
-rw-r--r--scripts/kconfig/nconf.c340
-rw-r--r--scripts/kconfig/nconf.gui.c2
-rw-r--r--scripts/kconfig/qconf.cc1
-rw-r--r--scripts/kconfig/symbol.c12
-rw-r--r--scripts/kconfig/util.c23
-rw-r--r--scripts/kconfig/zconf.l8
-rw-r--r--scripts/kconfig/zconf.lex.c_shipped8
21 files changed, 391 insertions, 283 deletions
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index a686f9cd69c..c858f8419eb 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -388,26 +388,3 @@ config FOO
depends on BAR && m
limits FOO to module (=m) or disabled (=n).
-
-Kconfig symbol existence
-~~~~~~~~~~~~~~~~~~~~~~~~
-The following two methods produce the same kconfig symbol dependencies
-but differ greatly in kconfig symbol existence (production) in the
-generated config file.
-
-case 1:
-
-config FOO
- tristate "about foo"
- depends on BAR
-
-vs. case 2:
-
-if BAR
-config FOO
- tristate "about foo"
-endif
-
-In case 1, the symbol FOO will always exist in the config file (given
-no other dependencies). In case 2, the symbol FOO will only exist in
-the config file if BAR is enabled.
diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt
index a09f1a6a830..b8b77bbc784 100644
--- a/Documentation/kbuild/kconfig.txt
+++ b/Documentation/kbuild/kconfig.txt
@@ -46,6 +46,12 @@ KCONFIG_OVERWRITECONFIG
If you set KCONFIG_OVERWRITECONFIG in the environment, Kconfig will not
break symlinks when .config is a symlink to somewhere else.
+CONFIG_
+--------------------------------------------------
+If you set CONFIG_ in the environment, Kconfig will prefix all symbols
+with its value when saving the configuration, instead of using the default,
+"CONFIG_".
+
______________________________________________________________________
Environment variables for '{allyes/allmod/allno/rand}config'
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 3091794e935..231b4759c71 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -11,6 +11,9 @@ else
Kconfig := Kconfig
endif
+# We need this, in case the user has it in its environment
+unexport CONFIG_
+
xconfig: $(obj)/qconf
$< $(Kconfig)
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index 4da3b4adfad..e39fcd8143e 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -36,6 +36,7 @@ enum input_mode {
} input_mode = oldaskconfig;
static int indent = 1;
+static int tty_stdio;
static int valid_stdin = 1;
static int sync_kconfig;
static int conf_cnt;
@@ -108,6 +109,8 @@ static int conf_askvalue(struct symbol *sym, const char *def)
case oldaskconfig:
fflush(stdout);
xfgets(line, 128, stdin);
+ if (!tty_stdio)
+ printf("\n");
return 1;
default:
break;
@@ -495,6 +498,8 @@ int main(int ac, char **av)
bindtextdomain(PACKAGE, LOCALEDIR);
textdomain(PACKAGE);
+ tty_stdio = isatty(0) && isatty(1) && isatty(2);
+
while ((opt = getopt_long(ac, av, "", long_opts, NULL)) != -1) {
input_mode = (enum input_mode)opt;
switch (opt) {
@@ -621,7 +626,7 @@ int main(int ac, char **av)
return 1;
}
}
- valid_stdin = isatty(0) && isatty(1) && isatty(2);
+ valid_stdin = tty_stdio;
}
switch (input_mode) {
diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c
index 290ce41f8ba..d6626521f9b 100644
--- a/scripts/kconfig/expr.c
+++ b/scripts/kconfig/expr.c
@@ -13,7 +13,7 @@
struct expr *expr_alloc_symbol(struct symbol *sym)
{
- struct expr *e = calloc(1, sizeof(*e));
+ struct expr *e = xcalloc(1, sizeof(*e));
e->type = E_SYMBOL;
e->left.sym = sym;
return e;
@@ -21,7 +21,7 @@ struct expr *expr_alloc_symbol(struct symbol *sym)
struct expr *expr_alloc_one(enum expr_type type, struct expr *ce)
{
- struct expr *e = calloc(1, sizeof(*e));
+ struct expr *e = xcalloc(1, sizeof(*e));
e->type = type;
e->left.expr = ce;
return e;
@@ -29,7 +29,7 @@ struct expr *expr_alloc_one(enum expr_type type, struct expr *ce)
struct expr *expr_alloc_two(enum expr_type type, struct expr *e1, struct expr *e2)
{
- struct expr *e = calloc(1, sizeof(*e));
+ struct expr *e = xcalloc(1, sizeof(*e));
e->type = type;
e->left.expr = e1;
e->right.expr = e2;
@@ -38,7 +38,7 @@ struct expr *expr_alloc_two(enum expr_type type, struct expr *e1, struct expr *e
struct expr *expr_alloc_comp(enum expr_type type, struct symbol *s1, struct symbol *s2)
{
- struct expr *e = calloc(1, sizeof(*e));
+ struct expr *e = xcalloc(1, sizeof(*e));
e->type = type;
e->left.sym = s1;
e->right.sym = s2;
@@ -66,7 +66,7 @@ struct expr *expr_copy(const struct expr *org)
if (!org)
return NULL;
- e = malloc(sizeof(*org));
+ e = xmalloc(sizeof(*org));
memcpy(e, org, sizeof(*org));
switch (org->type) {
case E_SYMBOL:
diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c
index adc230638c5..f2bee70e26f 100644
--- a/scripts/kconfig/gconf.c
+++ b/scripts/kconfig/gconf.c
@@ -10,6 +10,7 @@
# include <config.h>
#endif
+#include <stdlib.h>
#include "lkc.h"
#include "images.c"
@@ -22,7 +23,6 @@
#include <string.h>
#include <unistd.h>
#include <time.h>
-#include <stdlib.h>
//#define DEBUG
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index c18f2bd9c09..f8aee5fc6d5 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -39,6 +39,12 @@ extern "C" {
#ifndef CONFIG_
#define CONFIG_ "CONFIG_"
#endif
+static inline const char *CONFIG_prefix(void)
+{
+ return getenv( "CONFIG_" ) ?: CONFIG_;
+}
+#undef CONFIG_
+#define CONFIG_ CONFIG_prefix()
#define TF_COMMAND 0x0001
#define TF_PARAM 0x0002
@@ -116,6 +122,8 @@ void menu_set_type(int type);
/* util.c */
struct file *file_lookup(const char *name);
int file_write_dep(const char *name);
+void *xmalloc(size_t size);
+void *xcalloc(size_t nmemb, size_t size);
struct gstr {
size_t len;
diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh
index c8e8a715475..80788137c67 100644
--- a/scripts/kconfig/lxdialog/check-lxdialog.sh
+++ b/scripts/kconfig/lxdialog/check-lxdialog.sh
@@ -21,6 +21,7 @@ ccflags()
{
if [ -f /usr/include/ncursesw/curses.h ]; then
echo '-I/usr/include/ncursesw -DCURSES_LOC="<ncursesw/curses.h>"'
+ echo ' -DNCURSES_WIDECHAR=1'
elif [ -f /usr/include/ncurses/ncurses.h ]; then
echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"'
elif [ -f /usr/include/ncurses/curses.h ]; then
diff --git a/scripts/kconfig/lxdialog/dialog.h b/scripts/kconfig/lxdialog/dialog.h
index ee17a5264d5..307022a8bee 100644
--- a/scripts/kconfig/lxdialog/dialog.h
+++ b/scripts/kconfig/lxdialog/dialog.h
@@ -221,7 +221,6 @@ int dialog_menu(const char *title, const char *prompt,
const void *selected, int *s_scroll);
int dialog_checklist(const char *title, const char *prompt, int height,
int width, int list_height);
-extern char dialog_input_result[];
int dialog_inputbox(const char *title, const char *prompt, int height,
int width, const char *init);
diff --git a/scripts/kconfig/lxdialog/inputbox.c b/scripts/kconfig/lxdialog/inputbox.c
index dd8e587c50e..21404a04d7c 100644
--- a/scripts/kconfig/lxdialog/inputbox.c
+++ b/scripts/kconfig/lxdialog/inputbox.c
@@ -45,7 +45,8 @@ int dialog_inputbox(const char *title, const char *prompt, int height, int width
const char *init)
{
int i, x, y, box_y, box_x, box_width;
- int input_x = 0, scroll = 0, key = 0, button = -1;
+ int input_x = 0, key = 0, button = -1;
+ int show_x, len, pos;
char *instr = dialog_input_result;
WINDOW *dialog;
@@ -97,14 +98,17 @@ do_resize:
wmove(dialog, box_y, box_x);
wattrset(dialog, dlg.inputbox.atr);
- input_x = strlen(instr);
+ len = strlen(instr);
+ pos = len;
- if (input_x >= box_width) {
- scroll = input_x - box_width + 1;
+ if (len >= box_width) {
+ show_x = len - box_width + 1;
input_x = box_width - 1;
for (i = 0; i < box_width - 1; i++)
- waddch(dialog, instr[scroll + i]);
+ waddch(dialog, instr[show_x + i]);
} else {
+ show_x = 0;
+ input_x = len;
waddstr(dialog, instr);
}
@@ -121,45 +125,104 @@ do_resize:
case KEY_UP:
case KEY_DOWN:
break;
- case KEY_LEFT:
- continue;
- case KEY_RIGHT:
- continue;
case KEY_BACKSPACE:
case 127:
- if (input_x || scroll) {
+ if (pos) {
wattrset(dialog, dlg.inputbox.atr);
- if (!input_x) {
- scroll = scroll < box_width - 1 ? 0 : scroll - (box_width - 1);
- wmove(dialog, box_y, box_x);
- for (i = 0; i < box_width; i++)
- waddch(dialog,
- instr[scroll + input_x + i] ?
- instr[scroll + input_x + i] : ' ');
- input_x = strlen(instr) - scroll;
+ if (input_x == 0) {
+ show_x--;
} else
input_x--;
- instr[scroll + input_x] = '\0';
- mvwaddch(dialog, box_y, input_x + box_x, ' ');
+
+ if (pos < len) {
+ for (i = pos - 1; i < len; i++) {
+ instr[i] = instr[i+1];
+ }
+ }
+
+ pos--;
+ len--;
+ instr[len] = '\0';
+ wmove(dialog, box_y, box_x);
+ for (i = 0; i < box_width; i++) {
+ if (!instr[show_x + i]) {
+ waddch(dialog, ' ');
+ break;
+ }
+ waddch(dialog, instr[show_x + i]);
+ }
wmove(dialog, box_y, input_x + box_x);
wrefresh(dialog);
}
continue;
+ case KEY_LEFT:
+ if (pos > 0) {
+ if (input_x > 0) {
+ wmove(dialog, box_y, --input_x + box_x);
+ } else if (input_x == 0) {
+ show_x--;
+ wmove(dialog, box_y, box_x);
+ for (i = 0; i < box_width; i++) {
+ if (!instr[show_x + i]) {
+ waddch(dialog, ' ');
+ break;
+ }
+ waddch(dialog, instr[show_x + i]);
+ }
+ wmove(dialog, box_y, box_x);
+ }
+ pos--;
+ }
+ continue;
+ case KEY_RIGHT:
+ if (pos < len) {
+ if (input_x < box_width - 1) {
+ wmove(dialog, box_y, ++input_x + box_x);
+ } else if (input_x == box_width - 1) {
+ show_x++;
+ wmove(dialog, box_y, box_x);
+ for (i = 0; i < box_width; i++) {
+ if (!instr[show_x + i]) {
+ waddch(dialog, ' ');
+ break;
+ }
+ waddch(dialog, instr[show_x + i]);
+ }
+ wmove(dialog, box_y, input_x + box_x);
+ }
+ pos++;
+ }
+ continue;
default:
if (key < 0x100 && isprint(key)) {
- if (scroll + input_x < MAX_LEN) {
+ if (len < MAX_LEN) {
wattrset(dialog, dlg.inputbox.atr);
- instr[scroll + input_x] = key;
- instr[scroll + input_x + 1] = '\0';
+ if (pos < len) {
+ for (i = len; i > pos; i--)
+ instr[i] = instr[i-1];
+ instr[pos] = key;
+ } else {
+ instr[len] = key;
+ }
+ pos++;
+ len++;
+ instr[len] = '\0';
+
if (input_x == box_width - 1) {
- scroll++;
- wmove(dialog, box_y, box_x);
- for (i = 0; i < box_width - 1; i++)
- waddch(dialog, instr [scroll + i]);
+ show_x++;
} else {
- wmove(dialog, box_y, input_x++ + box_x);
- waddch(dialog, key);
+ input_x++;
+ }
+
+ wmove(dialog, box_y, box_x);
+ for (i = 0; i < box_width; i++) {
+ if (!instr[show_x + i]) {
+ waddch(dialog, ' ');
+ break;
+ }
+ waddch(dialog, instr[show_x + i]);
}
+ wmove(dialog, box_y, input_x + box_x);
wrefresh(dialog);
} else
flash(); /* Alarm user about overflow */
diff --git a/scripts/kconfig/lxdialog/menubox.c b/scripts/kconfig/lxdialog/menubox.c
index 1d604738fa1..48d382e7e37 100644
--- a/scripts/kconfig/lxdialog/menubox.c
+++ b/scripts/kconfig/lxdialog/menubox.c
@@ -26,7 +26,7 @@
*
* *) A bugfix for the Page-Down problem
*
- * *) Formerly when I used Page Down and Page Up, the cursor would be set
+ * *) Formerly when I used Page Down and Page Up, the cursor would be set
* to the first position in the menu box. Now lxdialog is a bit
* smarter and works more like other menu systems (just have a look at
* it).
@@ -154,12 +154,14 @@ static void print_arrows(WINDOW * win, int item_no, int scroll, int y, int x,
*/
static void print_buttons(WINDOW * win, int height, int width, int selected)
{
- int x = width / 2 - 16;
+ int x = width / 2 - 28;
int y = height - 2;
print_button(win, gettext("Select"), y, x, selected == 0);
print_button(win, gettext(" Exit "), y, x + 12, selected == 1);
print_button(win, gettext(" Help "), y, x + 24, selected == 2);
+ print_button(win, gettext(" Save "), y, x + 36, selected == 3);
+ print_button(win, gettext(" Load "), y, x + 48, selected == 4);
wmove(win, y, x + 1 + 12 * selected);
wrefresh(win);
@@ -372,7 +374,7 @@ do_resize:
case TAB:
case KEY_RIGHT:
button = ((key == KEY_LEFT ? --button : ++button) < 0)
- ? 2 : (button > 2 ? 0 : button);
+ ? 4 : (button > 4 ? 0 : button);
print_buttons(dialog, height, width, button);
wrefresh(menu);
@@ -399,17 +401,17 @@ do_resize:
return 2;
case 's':
case 'y':
- return 3;
+ return 5;
case 'n':
- return 4;
+ return 6;
case 'm':
- return 5;
+ return 7;
case ' ':
- return 6;
+ return 8;
case '/':
- return 7;
+ return 9;
case 'z':
- return 8;
+ return 10;
case '\n':
return button;
}
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 53975cf8760..566288a7637 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -280,6 +280,7 @@ static struct menu *current_menu;
static int child_count;
static int single_menu_mode;
static int show_all_options;
+static int save_and_exit;
static void conf(struct menu *menu, struct menu *active_menu);
static void conf_choice(struct menu *menu);
@@ -348,15 +349,19 @@ static void search_conf(void)
{
struct symbol **sym_arr;
struct gstr res;
+ struct gstr title;
char *dialog_input;
int dres, vscroll = 0, hscroll = 0;
bool again;
+ title = str_new();
+ str_printf( &title, _("Enter %s (sub)string to search for "
+ "(with or without \"%s\")"), CONFIG_, CONFIG_);
+
again:
dialog_clear();
dres = dialog_inputbox(_("Search Configuration Parameter"),
- _("Enter " CONFIG_ " (sub)string to search for "
- "(with or without \"" CONFIG_ "\")"),
+ str_get(&title),
10, 75, "");
switch (dres) {
case 0:
@@ -365,6 +370,7 @@ again:
show_helptext(_("Search Configuration"), search_help);
goto again;
default:
+ str_free(&title);
return;
}
@@ -398,6 +404,7 @@ again:
str_free(&res);
} while (again);
free(sym_arr);
+ str_free(&title);
}
static void build_conf(struct menu *menu)
@@ -592,14 +599,6 @@ static void conf(struct menu *menu, struct menu *active_menu)
build_conf(menu);
if (!child_count)
break;
- if (menu == &rootmenu) {
- item_make("--- ");
- item_set_tag(':');
- item_make(_(" Load an Alternate Configuration File"));
- item_set_tag('L');
- item_make(_(" Save an Alternate Configuration File"));
- item_set_tag('S');
- }
dialog_clear();
res = dialog_menu(prompt ? _(prompt) : _("Main Menu"),
_(menu_instructions),
@@ -636,12 +635,6 @@ static void conf(struct menu *menu, struct menu *active_menu)
case 's':
conf_string(submenu);
break;
- case 'L':
- conf_load();
- break;
- case 'S':
- conf_save();
- break;
}
break;
case 2:
@@ -651,6 +644,12 @@ static void conf(struct menu *menu, struct menu *active_menu)
show_helptext(_("README"), _(mconf_readme));
break;
case 3:
+ conf_save();
+ break;
+ case 4:
+ conf_load();
+ break;
+ case 5:
if (item_is_tag('t')) {
if (sym_set_tristate_value(sym, yes))
break;
@@ -658,24 +657,24 @@ static void conf(struct menu *menu, struct menu *active_menu)
show_textbox(NULL, setmod_text, 6, 74);
}
break;
- case 4:
+ case 6:
if (item_is_tag('t'))
sym_set_tristate_value(sym, no);
break;
- case 5:
+ case 7:
if (item_is_tag('t'))
sym_set_tristate_value(sym, mod);
break;
- case 6:
+ case 8:
if (item_is_tag('t'))
sym_toggle_tristate_value(sym);
else if (item_is_tag('m'))
conf(submenu, NULL);
break;
- case 7:
+ case 9:
search_conf();
break;
- case 8:
+ case 10:
show_all_options = !show_all_options;
break;
}
@@ -702,6 +701,17 @@ static void show_helptext(const char *title, const char *text)
show_textbox(title, text, 0, 0);
}
+static void conf_message_callback(const char *fmt, va_list ap)
+{
+ char buf[PATH_MAX+1];
+
+ vsnprintf(buf, sizeof(buf), fmt, ap);
+ if (save_and_exit)
+ printf("%s", buf);
+ else
+ show_textbox(NULL, buf, 6, 60);
+}
+
static void show_help(struct menu *menu)
{
struct gstr help = str_new();
@@ -870,6 +880,7 @@ static int handle_exit(void)
{
int res;
+ save_and_exit = 1;
dialog_clear();
if (conf_get_changed())
res = dialog_yesno(NULL,
@@ -941,6 +952,7 @@ int main(int ac, char **av)
}
set_config_filename(conf_get_configname());
+ conf_set_message_callback(conf_message_callback);
do {
conf(&rootmenu, NULL);
res = handle_exit();
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index e98a05c8e50..f3bffa30933 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -48,7 +48,7 @@ void menu_add_entry(struct symbol *sym)
{
struct menu *menu;
- menu = malloc(sizeof(*menu));
+ menu = xmalloc(sizeof(*menu));
memset(menu, 0, sizeof(*menu));
menu->sym = sym;
menu->parent = current_menu;
@@ -531,7 +531,7 @@ static void get_prompt_str(struct gstr *r, struct property *prop,
location = menu;
}
if (head && location) {
- jump = malloc(sizeof(struct jump_key));
+ jump = xmalloc(sizeof(struct jump_key));
if (menu_is_visible(prop->menu)) {
/*
diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh
index 974d5cb7e30..05274fccb88 100755
--- a/scripts/kconfig/merge_config.sh
+++ b/scripts/kconfig/merge_config.sh
@@ -32,11 +32,13 @@ usage() {
echo " -m only merge the fragments, do not execute the make command"
echo " -n use allnoconfig instead of alldefconfig"
echo " -r list redundant entries when merging fragments"
+ echo " -O dir to put generated output files"
}
MAKE=true
ALLTARGET=alldefconfig
WARNREDUN=false
+OUTPUT=.
while true; do
case $1 in
@@ -59,6 +61,16 @@ while true; do
shift
continue
;;
+ "-O")
+ if [ -d $2 ];then
+ OUTPUT=$(echo $2 | sed 's/\/*$//')
+ else
+ echo "output directory $2 does not exist" 1>&2
+ exit 1
+ fi
+ shift 2
+ continue
+ ;;
*)
break
;;
@@ -100,9 +112,9 @@ for MERGE_FILE in $MERGE_LIST ; do
done
if [ "$MAKE" = "false" ]; then
- cp $TMP_FILE .config
+ cp $TMP_FILE $OUTPUT/.config
echo "#"
- echo "# merged configuration written to .config (needs make)"
+ echo "# merged configuration written to $OUTPUT/.config (needs make)"
echo "#"
clean_up
exit
@@ -111,14 +123,14 @@ fi
# Use the merged file as the starting point for:
# alldefconfig: Fills in any missing symbols with Kconfig default
# allnoconfig: Fills in any missing symbols with # CONFIG_* is not set
-make KCONFIG_ALLCONFIG=$TMP_FILE $ALLTARGET
+make KCONFIG_ALLCONFIG=$TMP_FILE O=$OUTPUT $ALLTARGET
# Check all specified config values took (might have missed-dependency issues)
for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do
REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE)
- ACTUAL_VAL=$(grep -w -e "$CFG" .config)
+ ACTUAL_VAL=$(grep -w -e "$CFG" $OUTPUT/.config)
if [ "x$REQUESTED_VAL" != "x$ACTUAL_VAL" ] ; then
echo "Value requested for $CFG not in final .config"
echo "Requested value: $REQUESTED_VAL"
diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c
index 87d4b15da95..dbf31edd22b 100644
--- a/scripts/kconfig/nconf.c
+++ b/scripts/kconfig/nconf.c
@@ -7,215 +7,208 @@
*/
#define _GNU_SOURCE
#include <string.h>
+#include <stdlib.h>
#include "lkc.h"
#include "nconf.h"
#include <ctype.h>
-static const char nconf_readme[] = N_(
-"Overview\n"
-"--------\n"
-"This interface let you select features and parameters for the build.\n"
-"Features can either be built-in, modularized, or ignored. Parameters\n"
-"must be entered in as decimal or hexadecimal numbers or text.\n"
+static const char nconf_global_help[] = N_(
+"Help windows\n"
+"------------\n"
+"o Global help: Unless in a data entry window, pressing <F1> will give \n"
+" you the global help window, which you are just reading.\n"
"\n"
-"Menu items beginning with following braces represent features that\n"
-" [ ] can be built in or removed\n"
-" < > can be built in, modularized or removed\n"
-" { } can be built in or modularized (selected by other feature)\n"
-" - - are selected by other feature,\n"
-" XXX cannot be selected. Use Symbol Info to find out why,\n"
-"while *, M or whitespace inside braces means to build in, build as\n"
-"a module or to exclude the feature respectively.\n"
+"o A short version of the global help is available by pressing <F3>.\n"
"\n"
-"To change any of these features, highlight it with the cursor\n"
-"keys and press <Y> to build it in, <M> to make it a module or\n"
-"<N> to removed it. You may also press the <Space Bar> to cycle\n"
-"through the available options (ie. Y->N->M->Y).\n"
+"o Local help: To get help related to the current menu entry, use any\n"
+" of <?> <h>, or if in a data entry window then press <F1>.\n"
"\n"
-"Some additional keyboard hints:\n"
"\n"
-"Menus\n"
-"----------\n"
-"o Use the Up/Down arrow keys (cursor keys) to highlight the item\n"
-" you wish to change use <Enter> or <Space>. Goto submenu by \n"
-" pressing <Enter> of <right-arrow>. Use <Esc> or <left-arrow> to go back.\n"
-" Submenus are designated by \"--->\".\n"
-"\n"
-" Searching: pressing '/' triggers interactive search mode.\n"
-" nconfig performs a case insensitive search for the string\n"
-" in the menu prompts (no regex support).\n"
-" Pressing the up/down keys highlights the previous/next\n"
-" matching item. Backspace removes one character from the\n"
-" match string. Pressing either '/' again or ESC exits\n"
-" search mode. All other keys behave normally.\n"
+"Menu entries\n"
+"------------\n"
+"This interface lets you select features and parameters for the kernel\n"
+"build. Kernel features can either be built-in, modularized, or removed.\n"
+"Parameters must be entered as text or decimal or hexadecimal numbers.\n"
"\n"
-" You may also use the <PAGE UP> and <PAGE DOWN> keys to scroll\n"
-" unseen options into view.\n"
+"Menu entries beginning with following braces represent features that\n"
+" [ ] can be built in or removed\n"
+" < > can be built in, modularized or removed\n"
+" { } can be built in or modularized, are selected by another feature\n"
+" - - are selected by another feature\n"
+" XXX cannot be selected. Symbol Info <F2> tells you why.\n"
+"*, M or whitespace inside braces means to build in, build as a module\n"
+"or to exclude the feature respectively.\n"
"\n"
-"o To exit a menu use the just press <ESC> <F5> <F8> or <left-arrow>.\n"
+"To change any of these features, highlight it with the movement keys\n"
+"listed below and press <y> to build it in, <m> to make it a module or\n"
+"<n> to remove it. You may press the <Space> key to cycle through the\n"
+"available options.\n"
"\n"
-"o To get help with an item, press <F1>\n"
-" Shortcut: Press <h> or <?>.\n"
+"A trailing \"--->\" designates a submenu.\n"
"\n"
"\n"
-"Radiolists (Choice lists)\n"
-"-----------\n"
-"o Use the cursor keys to select the option you wish to set and press\n"
-" <S> or the <SPACE BAR>.\n"
+"Menu navigation keys\n"
+"----------------------------------------------------------------------\n"
+"Linewise up <Up>\n"
+"Linewise down <Down>\n"
+"Pagewise up <Page Up>\n"
+"Pagewise down <Page Down>\n"
+"First entry <Home>\n"
+"Last entry <End>\n"
+"Enter a submenu <Right> <Enter>\n"
+"Go back to parent menu <Left> <Esc> <F5>\n"
+"Close a help window <Enter> <Esc> <F5>\n"
+"Close entry window, apply <Enter>\n"
+"Close entry window, forget <Esc> <F5>\n"
+"Start incremental, case-insensitive search for STRING in menu entries,\n"
+" no regex support, STRING is displayed in upper left corner\n"
+" </>STRING\n"
+" Remove last character <Backspace>\n"
+" Jump to next hit <Down>\n"
+" Jump to previous hit <Up>\n"
+"Exit menu search mode </> <Esc>\n"
+"Search for configuration variables with or without leading CONFIG_\n"
+" <F8>RegExpr<Enter>\n"
+"Verbose search help <F8><F1>\n"
+"----------------------------------------------------------------------\n"
"\n"
-" Shortcut: Press the first letter of the option you wish to set then\n"
-" press <S> or <SPACE BAR>.\n"
+"Unless in a data entry window, key <1> may be used instead of <F1>,\n"
+"<2> instead of <F2>, etc.\n"
"\n"
-"o To see available help for the item, press <F1>\n"
-" Shortcut: Press <H> or <?>.\n"
"\n"
+"Radiolist (Choice list)\n"
+"-----------------------\n"
+"Use the movement keys listed above to select the option you wish to set\n"
+"and press <Space>.\n"
"\n"
-"Data Entry\n"
-"-----------\n"
-"o Enter the requested information and press <ENTER>\n"
-" If you are entering hexadecimal values, it is not necessary to\n"
-" add the '0x' prefix to the entry.\n"
"\n"
-"o For help, press <F1>.\n"
+"Data entry\n"
+"----------\n"
+"Enter the requested information and press <Enter>. Hexadecimal values\n"
+"may be entered without the \"0x\" prefix.\n"
"\n"
"\n"
-"Text Box (Help Window)\n"
-"--------\n"
-"o Use the cursor keys to scroll up/down/left/right. The VI editor\n"
-" keys h,j,k,l function here as do <u>, <d> and <SPACE BAR> for\n"
-" those who are familiar with less and lynx.\n"
+"Text Box (Help Window)\n"
+"----------------------\n"
+"Use movement keys as listed in table above.\n"
"\n"
-"o Press <Enter>, <F1>, <F5>, <F9>, <q> or <Esc> to exit.\n"
+"Press any of <Enter> <Esc> <q> <F5> <F9> to exit.\n"
"\n"
"\n"
-"Alternate Configuration Files\n"
+"Alternate configuration files\n"
"-----------------------------\n"
-"nconfig supports the use of alternate configuration files for\n"
-"those who, for various reasons, find it necessary to switch\n"
-"between different configurations.\n"
+"nconfig supports switching between different configurations.\n"
+"Press <F6> to save your current configuration. Press <F7> and enter\n"
+"a file name to load a previously saved configuration.\n"
"\n"
-"At the end of the main menu you will find two options. One is\n"
-"for saving the current configuration to a file of your choosing.\n"
-"The other option is for loading a previously saved alternate\n"
-"configuration.\n"
"\n"
-"Even if you don't use alternate configuration files, but you\n"
-"find during a nconfig session that you have completely messed\n"
-"up your settings, you may use the \"Load Alternate...\" option to\n"
-"restore your previously saved settings from \".config\" without\n"
-"restarting nconfig.\n"
+"Terminal configuration\n"
+"----------------------\n"
+"If you use nconfig in a xterm window, make sure your TERM environment\n"
+"variable specifies a terminal configuration which supports at least\n"
+"16 colors. Otherwise nconfig will look rather bad.\n"
"\n"
-"Other information\n"
-"-----------------\n"
-"If you use nconfig in an XTERM window make sure you have your\n"
-"$TERM variable set to point to a xterm definition which supports color.\n"
-"Otherwise, nconfig will look rather bad. nconfig will not\n"
-"display correctly in a RXVT window because rxvt displays only one\n"
-"intensity of color, bright.\n"
+"If the \"stty size\" command reports the current terminalsize correctly,\n"
+"nconfig will adapt to sizes larger than the traditional 80x25 \"standard\"\n"
+"and display longer menus properly.\n"
"\n"
-"nconfig will display larger menus on screens or xterms which are\n"
-"set to display more than the standard 25 row by 80 column geometry.\n"
-"In order for this to work, the \"stty size\" command must be able to\n"
-"display the screen's current row and column geometry. I STRONGLY\n"
-"RECOMMEND that you make sure you do NOT have the shell variables\n"
-"LINES and COLUMNS exported into your environment. Some distributions\n"
-"export those variables via /etc/profile. Some ncurses programs can\n"
-"become confused when those variables (LINES & COLUMNS) don't reflect\n"
-"the true screen size.\n"
"\n"
-"Optional personality available\n"
-"------------------------------\n"
-"If you prefer to have all of the options listed in a single menu, rather\n"
-"than the default multimenu hierarchy, run the nconfig with NCONFIG_MODE\n"
-"environment variable set to single_menu. Example:\n"
+"Single menu mode\n"
+"----------------\n"
+"If you prefer to have all of the menu entries listed in a single menu,\n"
+"rather than the default multimenu hierarchy, run nconfig with\n"
+"NCONFIG_MODE environment variable set to single_menu. Example:\n"
"\n"
"make NCONFIG_MODE=single_menu nconfig\n"
"\n"
-"<Enter> will then unroll the appropriate category, or enfold it if it\n"
-"is already unrolled.\n"
+"<Enter> will then unfold the appropriate category, or fold it if it\n"
+"is already unfolded. Folded menu entries will be designated by a\n"
+"leading \"++>\" and unfolded entries by a leading \"-->\".\n"
"\n"
-"Note that this mode can eventually be a little more CPU expensive\n"
-"(especially with a larger number of unrolled categories) than the\n"
-"default mode.\n"
+"Note that this mode can eventually be a little more CPU expensive than\n"
+"the default mode, especially with a larger number of unfolded submenus.\n"
"\n"),
menu_no_f_instructions[] = N_(
-" You do not have function keys support. Please follow the\n"
-" following instructions:\n"
-" Arrow keys navigate the menu.\n"
-" <Enter> or <right-arrow> selects submenus --->.\n"
-" Capital Letters are hotkeys.\n"
-" Pressing <Y> includes, <N> excludes, <M> modularizes features.\n"
-" Pressing SpaceBar toggles between the above options.\n"
-" Press <Esc> or <left-arrow> to go back one menu,\n"
-" <?> or <h> for Help, </> for Search.\n"
-" <1> is interchangeable with <F1>, <2> with <F2>, etc.\n"
-" Legend: [*] built-in [ ] excluded <M> module < > module capable.\n"
-" <Esc> always leaves the current window.\n"),
+"Legend: [*] built-in [ ] excluded <M> module < > module capable.\n"
+"Submenus are designated by a trailing \"--->\".\n"
+"\n"
+"Use the following keys to navigate the menus:\n"
+"Move up or down with <Up> and <Down>.\n"
+"Enter a submenu with <Enter> or <Right>.\n"
+"Exit a submenu to its parent menu with <Esc> or <Left>.\n"
+"Pressing <y> includes, <n> excludes, <m> modularizes features.\n"
+"Pressing <Space> cycles through the available options.\n"
+"To search for menu entries press </>.\n"
+"<Esc> always leaves the current window.\n"
+"\n"
+"You do not have function keys support.\n"
+"Press <1> instead of <F1>, <2> instead of <F2>, etc.\n"
+"For verbose global help use key <1>.\n"
+"For help related to the current menu entry press <?> or <h>.\n"),
menu_instructions[] = N_(
-" Arrow keys navigate the menu.\n"
-" <Enter> or <right-arrow> selects submenus --->.\n"
-" Capital Letters are hotkeys.\n"
-" Pressing <Y> includes, <N> excludes, <M> modularizes features.\n"
-" Pressing SpaceBar toggles between the above options\n"
-" Press <Esc>, <F5> or <left-arrow> to go back one menu,\n"
-" <?>, <F1> or <h> for Help, </> for Search.\n"
-" <1> is interchangeable with <F1>, <2> with <F2>, etc.\n"
-" Legend: [*] built-in [ ] excluded <M> module < > module capable.\n"
-" <Esc> always leaves the current window\n"),
+"Legend: [*] built-in [ ] excluded <M> module < > module capable.\n"
+"Submenus are designated by a trailing \"--->\".\n"
+"\n"
+"Use the following keys to navigate the menus:\n"
+"Move up or down with <Up> or <Down>.\n"
+"Enter a submenu with <Enter> or <Right>.\n"
+"Exit a submenu to its parent menu with <Esc> or <Left>.\n"
+"Pressing <y> includes, <n> excludes, <m> modularizes features.\n"
+"Pressing <Space> cycles through the available options.\n"
+"To search for menu entries press </>.\n"
+"<Esc> always leaves the current window.\n"
+"\n"
+"Pressing <1> may be used instead of <F1>, <2> instead of <F2>, etc.\n"
+"For verbose global help press <F1>.\n"
+"For help related to the current menu entry press <?> or <h>.\n"),
radiolist_instructions[] = N_(
-" Use the arrow keys to navigate this window or\n"
-" press the hotkey of the item you wish to select\n"
-" followed by the <SPACE BAR>.\n"
-" Press <?>, <F1> or <h> for additional information about this option.\n"),
+"Press <Up>, <Down>, <Home> or <End> to navigate a radiolist, select\n"
+"with <Space>.\n"
+"For help related to the current entry press <?> or <h>.\n"
+"For global help press <F1>.\n"),
inputbox_instructions_int[] = N_(
"Please enter a decimal value.\n"
"Fractions will not be accepted.\n"
-"Press <RETURN> to accept, <ESC> to cancel."),
+"Press <Enter> to apply, <Esc> to cancel."),
inputbox_instructions_hex[] = N_(
"Please enter a hexadecimal value.\n"
-"Press <RETURN> to accept, <ESC> to cancel."),
+"Press <Enter> to apply, <Esc> to cancel."),
inputbox_instructions_string[] = N_(
"Please enter a string value.\n"
-"Press <RETURN> to accept, <ESC> to cancel."),
+"Press <Enter> to apply, <Esc> to cancel."),
setmod_text[] = N_(
-"This feature depends on another which\n"
-"has been configured as a module.\n"
-"As a result, this feature will be built as a module."),
+"This feature depends on another feature which has been configured as a\n"
+"module. As a result, the current feature will be built as a module too."),
load_config_text[] = N_(
"Enter the name of the configuration file you wish to load.\n"
-"Accept the name shown to restore the configuration you\n"
-"last retrieved. Leave blank to abort."),
+"Accept the name shown to restore the configuration you last\n"
+"retrieved. Leave empty to abort."),
load_config_help[] = N_(
-"\n"
"For various reasons, one may wish to keep several different\n"
"configurations available on a single machine.\n"
"\n"
"If you have saved a previous configuration in a file other than the\n"
-"default one, entering its name here will allow you to modify that\n"
-"configuration.\n"
+"default one, entering its name here will allow you to load and modify\n"
+"that configuration.\n"
"\n"
-"If you are uncertain, then you have probably never used alternate\n"
-"configuration files. You should therefor leave this blank to abort.\n"),
+"Leave empty to abort.\n"),
save_config_text[] = N_(
"Enter a filename to which this configuration should be saved\n"
-"as an alternate. Leave blank to abort."),
+"as an alternate. Leave empty to abort."),
save_config_help[] = N_(
-"\n"
-"For various reasons, one may wish to keep different configurations\n"
-"available on a single machine.\n"
+"For various reasons, one may wish to keep several different\n"
+"configurations available on a single machine.\n"
"\n"
"Entering a file name here will allow you to later retrieve, modify\n"
"and use the current configuration as an alternate to whatever\n"
"configuration options you have selected at that time.\n"
"\n"
-"If you are uncertain what all this means then you should probably\n"
-"leave this blank.\n"),
+"Leave empty to abort.\n"),
search_help[] = N_(
-"\n"
-"Search for symbols and display their relations. Regular expressions\n"
-"are allowed.\n"
-"Example: search for \"^FOO\"\n"
+"Search for symbols (configuration variable names CONFIG_*) and display\n"
+"their relations. Regular expressions are supported.\n"
+"Example: Search for \"^FOO\".\n"
"Result:\n"
"-----------------------------------------------------------------\n"
"Symbol: FOO [ = m]\n"
@@ -229,26 +222,26 @@ search_help[] = N_(
"Selects: LIBCRC32\n"
"Selected by: BAR\n"
"-----------------------------------------------------------------\n"
-"o The line 'Prompt:' shows the text used in the menu structure for\n"
-" this symbol\n"
-"o The 'Defined at' line tell at what file / line number the symbol\n"
-" is defined\n"
-"o The 'Depends on:' line tell what symbols needs to be defined for\n"
-" this symbol to be visible in the menu (selectable)\n"
-"o The 'Location:' lines tell where in the menu structure this symbol\n"
-" is located\n"
-" A location followed by a [ = y] indicate that this is a selectable\n"
-" menu item - and current value is displayed inside brackets.\n"
-"o The 'Selects:' line tell what symbol will be automatically\n"
-" selected if this symbol is selected (y or m)\n"
-"o The 'Selected by' line tell what symbol has selected this symbol\n"
+"o The line 'Prompt:' shows the text displayed for this symbol in\n"
+" the menu hierarchy.\n"
+"o The 'Defined at' line tells at what file / line number the symbol is\n"
+" defined.\n"
+"o The 'Depends on:' line lists symbols that need to be defined for\n"
+" this symbol to be visible and selectable in the menu.\n"
+"o The 'Location:' lines tell, where in the menu structure this symbol\n"
+" is located. A location followed by a [ = y] indicates that this is\n"
+" a selectable menu item, and the current value is displayed inside\n"
+" brackets.\n"
+"o The 'Selects:' line tells, what symbol will be automatically selected\n"
+" if this symbol is selected (y or m).\n"
+"o The 'Selected by' line tells what symbol has selected this symbol.\n"
"\n"
"Only relevant lines are shown.\n"
"\n\n"
"Search examples:\n"
-"Examples: USB => find all symbols containing USB\n"
-" ^USB => find all symbols starting with USB\n"
-" USB$ => find all symbols ending with USB\n"
+"USB => find all symbols containing USB\n"
+"^USB => find all symbols starting with USB\n"
+"USB$ => find all symbols ending with USB\n"
"\n");
struct mitem {
@@ -319,19 +312,19 @@ struct function_keys function_keys[] = {
},
{
.key_str = "F2",
- .func = "Sym Info",
+ .func = "SymInfo",
.key = F_SYMBOL,
.handler = handle_f2,
},
{
.key_str = "F3",
- .func = "Insts",
+ .func = "Help 2",
.key = F_INSTS,
.handler = handle_f3,
},
{
.key_str = "F4",
- .func = "Config",
+ .func = "ShowAll",
.key = F_CONF,
.handler = handle_f4,
},
@@ -355,7 +348,7 @@ struct function_keys function_keys[] = {
},
{
.key_str = "F8",
- .func = "Sym Search",
+ .func = "SymSearch",
.key = F_SEARCH,
.handler = handle_f8,
},
@@ -392,7 +385,7 @@ static void print_function_line(void)
static void handle_f1(int *key, struct menu *current_item)
{
show_scroll_win(main_window,
- _("README"), _(nconf_readme));
+ _("Global help"), _(nconf_global_help));
return;
}
@@ -407,7 +400,7 @@ static void handle_f2(int *key, struct menu *current_item)
static void handle_f3(int *key, struct menu *current_item)
{
show_scroll_win(main_window,
- _("Instructions"),
+ _("Short help"),
_(current_instructions));
return;
}
@@ -696,13 +689,18 @@ static void search_conf(void)
{
struct symbol **sym_arr;
struct gstr res;
+ struct gstr title;
char *dialog_input;
int dres;
+
+ title = str_new();
+ str_printf( &title, _("Enter %s (sub)string to search for "
+ "(with or without \"%s\")"), CONFIG_, CONFIG_);
+
again:
dres = dialog_inputbox(main_window,
_("Search Configuration Parameter"),
- _("Enter " CONFIG_ " (sub)string to search for "
- "(with or without \"" CONFIG_ "\")"),
+ str_get(&title),
"", &dialog_input_result, &dialog_input_result_len);
switch (dres) {
case 0:
@@ -712,6 +710,7 @@ again:
_("Search Configuration"), search_help);
goto again;
default:
+ str_free(&title);
return;
}
@@ -726,6 +725,7 @@ again:
show_scroll_win(main_window,
_("Search Results"), str_get(&res));
str_free(&res);
+ str_free(&title);
}
diff --git a/scripts/kconfig/nconf.gui.c b/scripts/kconfig/nconf.gui.c
index 379003c7a2b..9f8c44ecc70 100644
--- a/scripts/kconfig/nconf.gui.c
+++ b/scripts/kconfig/nconf.gui.c
@@ -48,7 +48,7 @@ static void set_normal_colors(void)
init_pair(INPUT_FIELD, -1, -1);
init_pair(FUNCTION_HIGHLIGHT, -1, -1);
- init_pair(FUNCTION_TEXT, COLOR_BLUE, -1);
+ init_pair(FUNCTION_TEXT, COLOR_YELLOW, -1);
}
/* available attributes:
diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index df274febb3e..1500c38f0cc 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -6,6 +6,7 @@
#include <qglobal.h>
#if QT_VERSION < 0x040000
+#include <stddef.h>
#include <qmainwindow.h>
#include <qvbox.h>
#include <qvaluelist.h>
diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c
index 22a3c400fc4..ecc5aa5f865 100644
--- a/scripts/kconfig/symbol.c
+++ b/scripts/kconfig/symbol.c
@@ -656,11 +656,11 @@ bool sym_set_string_value(struct symbol *sym, const char *newval)
size = strlen(newval) + 1;
if (sym->type == S_HEX && (newval[0] != '0' || (newval[1] != 'x' && newval[1] != 'X'))) {
size += 2;
- sym->def[S_DEF_USER].val = val = malloc(size);
+ sym->def[S_DEF_USER].val = val = xmalloc(size);
*val++ = '0';
*val++ = 'x';
} else if (!oldval || strcmp(oldval, newval))
- sym->def[S_DEF_USER].val = val = malloc(size);
+ sym->def[S_DEF_USER].val = val = xmalloc(size);
else
return true;
@@ -812,7 +812,7 @@ struct symbol *sym_lookup(const char *name, int flags)
hash = 0;
}
- symbol = malloc(sizeof(*symbol));
+ symbol = xmalloc(sizeof(*symbol));
memset(symbol, 0, sizeof(*symbol));
symbol->name = new_name;
symbol->type = S_UNKNOWN;
@@ -863,7 +863,7 @@ const char *sym_expand_string_value(const char *in)
size_t reslen;
reslen = strlen(in) + 1;
- res = malloc(reslen);
+ res = xmalloc(reslen);
res[0] = '\0';
while ((src = strchr(in, '$'))) {
@@ -921,7 +921,7 @@ const char *sym_escape_string_value(const char *in)
p++;
}
- res = malloc(reslen);
+ res = xmalloc(reslen);
res[0] = '\0';
strcat(res, "\"");
@@ -1228,7 +1228,7 @@ struct property *prop_alloc(enum prop_type type, struct symbol *sym)
struct property *prop;
struct property **propp;
- prop = malloc(sizeof(*prop));
+ prop = xmalloc(sizeof(*prop));
memset(prop, 0, sizeof(*prop));
prop->type = type;
prop->sym = sym;
diff --git a/scripts/kconfig/util.c b/scripts/kconfig/util.c
index d0b8b2318e4..6e7fbf19680 100644
--- a/scripts/kconfig/util.c
+++ b/scripts/kconfig/util.c
@@ -23,7 +23,7 @@ struct file *file_lookup(const char *name)
}
}
- file = malloc(sizeof(*file));
+ file = xmalloc(sizeof(*file));
memset(file, 0, sizeof(*file));
file->name = file_name;
file->next = file_list;
@@ -81,7 +81,7 @@ int file_write_dep(const char *name)
struct gstr str_new(void)
{
struct gstr gs;
- gs.s = malloc(sizeof(char) * 64);
+ gs.s = xmalloc(sizeof(char) * 64);
gs.len = 64;
gs.max_width = 0;
strcpy(gs.s, "\0");
@@ -138,3 +138,22 @@ const char *str_get(struct gstr *gs)
return gs->s;
}
+void *xmalloc(size_t size)
+{
+ void *p = malloc(size);
+ if (p)
+ return p;
+ fprintf(stderr, "Out of memory.\n");
+ exit(1);
+}
+
+void *xcalloc(size_t nmemb, size_t size)
+{
+ void *p = calloc(nmemb, size);
+ if (p)
+ return p;
+ fprintf(stderr, "Out of memory.\n");
+ exit(1);
+}
+
+
diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l
index 00f9d3a9cf8..6555a475453 100644
--- a/scripts/kconfig/zconf.l
+++ b/scripts/kconfig/zconf.l
@@ -40,7 +40,7 @@ static void zconf_endfile(void);
static void new_string(void)
{
- text = malloc(START_STRSIZE);
+ text = xmalloc(START_STRSIZE);
text_asize = START_STRSIZE;
text_size = 0;
*text = 0;
@@ -62,7 +62,7 @@ static void append_string(const char *str, int size)
static void alloc_string(const char *str, int size)
{
- text = malloc(size + 1);
+ text = xmalloc(size + 1);
memcpy(text, str, size);
text[size] = 0;
}
@@ -288,7 +288,7 @@ void zconf_initscan(const char *name)
exit(1);
}
- current_buf = malloc(sizeof(*current_buf));
+ current_buf = xmalloc(sizeof(*current_buf));
memset(current_buf, 0, sizeof(*current_buf));
current_file = file_lookup(name);
@@ -299,7 +299,7 @@ void zconf_nextfile(const char *name)
{
struct file *iter;
struct file *file = file_lookup(name);
- struct buffer *buf = malloc(sizeof(*buf));
+ struct buffer *buf = xmalloc(sizeof(*buf));
memset(buf, 0, sizeof(*buf));
current_buf->state = YY_CURRENT_BUFFER;
diff --git a/scripts/kconfig/zconf.lex.c_shipped b/scripts/kconfig/zconf.lex.c_shipped
index c32b1a49f5a..a0521aa5974 100644
--- a/scripts/kconfig/zconf.lex.c_shipped
+++ b/scripts/kconfig/zconf.lex.c_shipped
@@ -802,7 +802,7 @@ static void zconf_endfile(void);
static void new_string(void)
{
- text = malloc(START_STRSIZE);
+ text = xmalloc(START_STRSIZE);
text_asize = START_STRSIZE;
text_size = 0;
*text = 0;
@@ -824,7 +824,7 @@ static void append_string(const char *str, int size)
static void alloc_string(const char *str, int size)
{
- text = malloc(size + 1);
+ text = xmalloc(size + 1);
memcpy(text, str, size);
text[size] = 0;
}
@@ -2343,7 +2343,7 @@ void zconf_initscan(const char *name)
exit(1);
}
- current_buf = malloc(sizeof(*current_buf));
+ current_buf = xmalloc(sizeof(*current_buf));
memset(current_buf, 0, sizeof(*current_buf));
current_file = file_lookup(name);
@@ -2354,7 +2354,7 @@ void zconf_nextfile(const char *name)
{
struct file *iter;
struct file *file = file_lookup(name);
- struct buffer *buf = malloc(sizeof(*buf));
+ struct buffer *buf = xmalloc(sizeof(*buf));
memset(buf, 0, sizeof(*buf));
current_buf->state = YY_CURRENT_BUFFER;