diff options
105 files changed, 7114 insertions, 239 deletions
diff --git a/Documentation/arm/cluster-pm-race-avoidance.txt b/Documentation/arm/cluster-pm-race-avoidance.txt new file mode 100644 index 00000000000..750b6fc24af --- /dev/null +++ b/Documentation/arm/cluster-pm-race-avoidance.txt @@ -0,0 +1,498 @@ +Cluster-wide Power-up/power-down race avoidance algorithm +========================================================= + +This file documents the algorithm which is used to coordinate CPU and +cluster setup and teardown operations and to manage hardware coherency +controls safely. + +The section "Rationale" explains what the algorithm is for and why it is +needed. "Basic model" explains general concepts using a simplified view +of the system. The other sections explain the actual details of the +algorithm in use. + + +Rationale +--------- + +In a system containing multiple CPUs, it is desirable to have the +ability to turn off individual CPUs when the system is idle, reducing +power consumption and thermal dissipation. + +In a system containing multiple clusters of CPUs, it is also desirable +to have the ability to turn off entire clusters. + +Turning entire clusters off and on is a risky business, because it +involves performing potentially destructive operations affecting a group +of independently running CPUs, while the OS continues to run. This +means that we need some coordination in order to ensure that critical +cluster-level operations are only performed when it is truly safe to do +so. + +Simple locking may not be sufficient to solve this problem, because +mechanisms like Linux spinlocks may rely on coherency mechanisms which +are not immediately enabled when a cluster powers up. Since enabling or +disabling those mechanisms may itself be a non-atomic operation (such as +writing some hardware registers and invalidating large caches), other +methods of coordination are required in order to guarantee safe +power-down and power-up at the cluster level. + +The mechanism presented in this document describes a coherent memory +based protocol for performing the needed coordination. It aims to be as +lightweight as possible, while providing the required safety properties. + + +Basic model +----------- + +Each cluster and CPU is assigned a state, as follows: + + DOWN + COMING_UP + UP + GOING_DOWN + + +---------> UP ----------+ + | v + + COMING_UP GOING_DOWN + + ^ | + +--------- DOWN <--------+ + + +DOWN: The CPU or cluster is not coherent, and is either powered off or + suspended, or is ready to be powered off or suspended. + +COMING_UP: The CPU or cluster has committed to moving to the UP state. + It may be part way through the process of initialisation and + enabling coherency. + +UP: The CPU or cluster is active and coherent at the hardware + level. A CPU in this state is not necessarily being used + actively by the kernel. + +GOING_DOWN: The CPU or cluster has committed to moving to the DOWN + state. It may be part way through the process of teardown and + coherency exit. + + +Each CPU has one of these states assigned to it at any point in time. +The CPU states are described in the "CPU state" section, below. + +Each cluster is also assigned a state, but it is necessary to split the +state value into two parts (the "cluster" state and "inbound" state) and +to introduce additional states in order to avoid races between different +CPUs in the cluster simultaneously modifying the state. The cluster- +level states are described in the "Cluster state" section. + +To help distinguish the CPU states from cluster states in this +discussion, the state names are given a CPU_ prefix for the CPU states, +and a CLUSTER_ or INBOUND_ prefix for the cluster states. + + +CPU state +--------- + +In this algorithm, each individual core in a multi-core processor is +referred to as a "CPU". CPUs are assumed to be single-threaded: +therefore, a CPU can only be doing one thing at a single point in time. + +This means that CPUs fit the basic model closely. + +The algorithm defines the following states for each CPU in the system: + + CPU_DOWN + CPU_COMING_UP + CPU_UP + CPU_GOING_DOWN + + cluster setup and + CPU setup complete policy decision + +-----------> CPU_UP ------------+ + | v + + CPU_COMING_UP CPU_GOING_DOWN + + ^ | + +----------- CPU_DOWN <----------+ + policy decision CPU teardown complete + or hardware event + + +The definitions of the four states correspond closely to the states of +the basic model. + +Transitions between states occur as follows. + +A trigger event (spontaneous) means that the CPU can transition to the +next state as a result of making local progress only, with no +requirement for any external event to happen. + + +CPU_DOWN: + + A CPU reaches the CPU_DOWN state when it is ready for + power-down. On reaching this state, the CPU will typically + power itself down or suspend itself, via a WFI instruction or a + firmware call. + + Next state: CPU_COMING_UP + Conditions: none + + Trigger events: + + a) an explicit hardware power-up operation, resulting + from a policy decision on another CPU; + + b) a hardware event, such as an interrupt. + + +CPU_COMING_UP: + + A CPU cannot start participating in hardware coherency until the + cluster is set up and coherent. If the cluster is not ready, + then the CPU will wait in the CPU_COMING_UP state until the + cluster has been set up. + + Next state: CPU_UP + Conditions: The CPU's parent cluster must be in CLUSTER_UP. + Trigger events: Transition of the parent cluster to CLUSTER_UP. + + Refer to the "Cluster state" section for a description of the + CLUSTER_UP state. + + +CPU_UP: + When a CPU reaches the CPU_UP state, it is safe for the CPU to + start participating in local coherency. + + This is done by jumping to the kernel's CPU resume code. + + Note that the definition of this state is slightly different + from the basic model definition: CPU_UP does not mean that the + CPU is coherent yet, but it does mean that it is safe to resume + the kernel. The kernel handles the rest of the resume + procedure, so the remaining steps are not visible as part of the + race avoidance algorithm. + + The CPU remains in this state until an explicit policy decision + is made to shut down or suspend the CPU. + + Next state: CPU_GOING_DOWN + Conditions: none + Trigger events: explicit policy decision + + +CPU_GOING_DOWN: + + While in this state, the CPU exits coherency, including any + operations required to achieve this (such as cleaning data + caches). + + Next state: CPU_DOWN + Conditions: local CPU teardown complete + Trigger events: (spontaneous) + + +Cluster state +------------- + +A cluster is a group of connected CPUs with some common resources. +Because a cluster contains multiple CPUs, it can be doing multiple +things at the same time. This has some implications. In particular, a +CPU can start up while another CPU is tearing the cluster down. + +In this discussion, the "outbound side" is the view of the cluster state +as seen by a CPU tearing the cluster down. The "inbound side" is the +view of the cluster state as seen by a CPU setting the CPU up. + +In order to enable safe coordination in such situations, it is important +that a CPU which is setting up the cluster can advertise its state +independently of the CPU which is tearing down the cluster. For this +reason, the cluster state is split into two parts: + + "cluster" state: The global state of the cluster; or the state + on the outbound side: + + CLUSTER_DOWN + CLUSTER_UP + CLUSTER_GOING_DOWN + + "inbound" state: The state of the cluster on the inbound side. + + INBOUND_NOT_COMING_UP + INBOUND_COMING_UP + + + The different pairings of these states results in six possible + states for the cluster as a whole: + + CLUSTER_UP + +==========> INBOUND_NOT_COMING_UP -------------+ + # | + | + CLUSTER_UP <----+ | + INBOUND_COMING_UP | v + + ^ CLUSTER_GOING_DOWN CLUSTER_GOING_DOWN + # INBOUND_COMING_UP <=== INBOUND_NOT_COMING_UP + + CLUSTER_DOWN | | + INBOUND_COMING_UP <----+ | + | + ^ | + +=========== CLUSTER_DOWN <------------+ + INBOUND_NOT_COMING_UP + + Transitions -----> can only be made by the outbound CPU, and + only involve changes to the "cluster" state. + + Transitions ===##> can only be made by the inbound CPU, and only + involve changes to the "inbound" state, except where there is no + further transition possible on the outbound side (i.e., the + outbound CPU has put the cluster into the CLUSTER_DOWN state). + + The race avoidance algorithm does not provide a way to determine + which exact CPUs within the cluster play these roles. This must + be decided in advance by some other means. Refer to the section + "Last man and first man selection" for more explanation. + + + CLUSTER_DOWN/INBOUND_NOT_COMING_UP is the only state where the + cluster can actually be powered down. + + The parallelism of the inbound and outbound CPUs is observed by + the existence of two different paths from CLUSTER_GOING_DOWN/ + INBOUND_NOT_COMING_UP (corresponding to GOING_DOWN in the basic + model) to CLUSTER_DOWN/INBOUND_COMING_UP (corresponding to + COMING_UP in the basic model). The second path avoids cluster + teardown completely. + + CLUSTER_UP/INBOUND_COMING_UP is equivalent to UP in the basic + model. The final transition to CLUSTER_UP/INBOUND_NOT_COMING_UP + is trivial and merely resets the state machine ready for the + next cycle. + + Details of the allowable transitions follow. + + The next state in each case is notated + + <cluster state>/<inbound state> (<transitioner>) + + where the <transitioner> is the side on which the transition + can occur; either the inbound or the outbound side. + + +CLUSTER_DOWN/INBOUND_NOT_COMING_UP: + + Next state: CLUSTER_DOWN/INBOUND_COMING_UP (inbound) + Conditions: none + Trigger events: + + a) an explicit hardware power-up operation, resulting + from a policy decision on another CPU; + + b) a hardware event, such as an interrupt. + + +CLUSTER_DOWN/INBOUND_COMING_UP: + + In this state, an inbound CPU sets up the cluster, including + enabling of hardware coherency at the cluster level and any + other operations (such as cache invalidation) which are required + in order to achieve this. + + The purpose of this state is to do sufficient cluster-level + setup to enable other CPUs in the cluster to enter coherency + safely. + + Next state: CLUSTER_UP/INBOUND_COMING_UP (inbound) + Conditions: cluster-level setup and hardware coherency complete + Trigger events: (spontaneous) + + +CLUSTER_UP/INBOUND_COMING_UP: + + Cluster-level setup is complete and hardware coherency is + enabled for the cluster. Other CPUs in the cluster can safely + enter coherency. + + This is a transient state, leading immediately to + CLUSTER_UP/INBOUND_NOT_COMING_UP. All other CPUs on the cluster + should consider treat these two states as equivalent. + + Next state: CLUSTER_UP/INBOUND_NOT_COMING_UP (inbound) + Conditions: none + Trigger events: (spontaneous) + + +CLUSTER_UP/INBOUND_NOT_COMING_UP: + + Cluster-level setup is complete and hardware coherency is + enabled for the cluster. Other CPUs in the cluster can safely + enter coherency. + + The cluster will remain in this state until a policy decision is + made to power the cluster down. + + Next state: CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP (outbound) + Conditions: none + Trigger events: policy decision to power down the cluster + + +CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP: + + An outbound CPU is tearing the cluster down. The selected CPU + must wait in this state until all CPUs in the cluster are in the + CPU_DOWN state. + + When all CPUs are in the CPU_DOWN state, the cluster can be torn + down, for example by cleaning data caches and exiting + cluster-level coherency. + + To avoid wasteful unnecessary teardown operations, the outbound + should check the inbound cluster state for asynchronous + transitions to INBOUND_COMING_UP. Alternatively, individual + CPUs can be checked for entry into CPU_COMING_UP or CPU_UP. + + + Next states: + + CLUSTER_DOWN/INBOUND_NOT_COMING_UP (outbound) + Conditions: cluster torn down and ready to power off + Trigger events: (spontaneous) + + CLUSTER_GOING_DOWN/INBOUND_COMING_UP (inbound) + Conditions: none + Trigger events: + + a) an explicit hardware power-up operation, + resulting from a policy decision on another + CPU; + + b) a hardware event, such as an interrupt. + + +CLUSTER_GOING_DOWN/INBOUND_COMING_UP: + + The cluster is (or was) being torn down, but another CPU has + come online in the meantime and is trying to set up the cluster + again. + + If the outbound CPU observes this state, it has two choices: + + a) back out of teardown, restoring the cluster to the + CLUSTER_UP state; + + b) finish tearing the cluster down and put the cluster + in the CLUSTER_DOWN state; the inbound CPU will + set up the cluster again from there. + + Choice (a) permits the removal of some latency by avoiding + unnecessary teardown and setup operations in situations where + the cluster is not really going to be powered down. + + + Next states: + + CLUSTER_UP/INBOUND_COMING_UP (outbound) + Conditions: cluster-level setup and hardware + coherency complete + Trigger events: (spontaneous) + + CLUSTER_DOWN/INBOUND_COMING_UP (outbound) + Conditions: cluster torn down and ready to power off + Trigger events: (spontaneous) + + +Last man and First man selection +-------------------------------- + +The CPU which performs cluster tear-down operations on the outbound side +is commonly referred to as the "last man". + +The CPU which performs cluster setup on the inbound side is commonly +referred to as the "first man". + +The race avoidance algorithm documented above does not provide a +mechanism to choose which CPUs should play these roles. + + +Last man: + +When shutting down the cluster, all the CPUs involved are initially +executing Linux and hence coherent. Therefore, ordinary spinlocks can +be used to select a last man safely, before the CPUs become +non-coherent. + + +First man: + +Because CPUs may power up asynchronously in response to external wake-up +events, a dynamic mechanism is needed to make sure that only one CPU +attempts to play the first man role and do the cluster-level +initialisation: any other CPUs must wait for this to complete before +proceeding. + +Cluster-level initialisation may involve actions such as configuring +coherency controls in the bus fabric. + +The current implementation in mcpm_head.S uses a separate mutual exclusion +mechanism to do this arbitration. This mechanism is documented in +detail in vlocks.txt. + + +Features and Limitations +------------------------ + +Implementation: + + The current ARM-based implementation is split between + arch/arm/common/mcpm_head.S (low-level inbound CPU operations) and + arch/arm/common/mcpm_entry.c (everything else): + + __mcpm_cpu_going_down() signals the transition of a CPU to the + CPU_GOING_DOWN state. + + __mcpm_cpu_down() signals the transition of a CPU to the CPU_DOWN + state. + + A CPU transitions to CPU_COMING_UP and then to CPU_UP via the + low-level power-up code in mcpm_head.S. This could + involve CPU-specific setup code, but in the current + implementation it does not. + + __mcpm_outbound_enter_critical() and __mcpm_outbound_leave_critical() + handle transitions from CLUSTER_UP to CLUSTER_GOING_DOWN + and from there to CLUSTER_DOWN or back to CLUSTER_UP (in + the case of an aborted cluster power-down). + + These functions are more complex than the __mcpm_cpu_*() + functions due to the extra inter-CPU coordination which + is needed for safe transitions at the cluster level. + + A cluster transitions from CLUSTER_DOWN back to CLUSTER_UP via + the low-level power-up code in mcpm_head.S. This + typically involves platform-specific setup code, + provided by the platform-specific power_up_setup + function registered via mcpm_sync_init. + +Deep topologies: + + As currently described and implemented, the algorithm does not + support CPU topologies involving more than two levels (i.e., + clusters of clusters are not supported). The algorithm could be + extended by replicating the cluster-level states for the + additional topological levels, and modifying the transition + rules for the intermediate (non-outermost) cluster levels. + + +Colophon +-------- + +Originally created and documented by Dave Martin for Linaro Limited, in +collaboration with Nicolas Pitre and Achin Gupta. + +Copyright (C) 2012-2013 Linaro Limited +Distributed under the terms of Version 2 of the GNU General Public +License, as defined in linux/COPYING. diff --git a/Documentation/arm/vlocks.txt b/Documentation/arm/vlocks.txt new file mode 100644 index 00000000000..415960a9bab --- /dev/null +++ b/Documentation/arm/vlocks.txt @@ -0,0 +1,211 @@ +vlocks for Bare-Metal Mutual Exclusion +====================================== + +Voting Locks, or "vlocks" provide a simple low-level mutual exclusion +mechanism, with reasonable but minimal requirements on the memory +system. + +These are intended to be used to coordinate critical activity among CPUs +which are otherwise non-coherent, in situations where the hardware +provides no other mechanism to support this and ordinary spinlocks +cannot be used. + + +vlocks make use of the atomicity provided by the memory system for +writes to a single memory location. To arbitrate, every CPU "votes for +itself", by storing a unique number to a common memory location. The +final value seen in that memory location when all the votes have been +cast identifies the winner. + +In order to make sure that the election produces an unambiguous result +in finite time, a CPU will only enter the election in the first place if +no winner has been chosen and the election does not appear to have +started yet. + + +Algorithm +--------- + +The easiest way to explain the vlocks algorithm is with some pseudo-code: + + + int currently_voting[NR_CPUS] = { 0, }; + int last_vote = -1; /* no votes yet */ + + bool vlock_trylock(int this_cpu) + { + /* signal our desire to vote */ + currently_voting[this_cpu] = 1; + if (last_vote != -1) { + /* someone already volunteered himself */ + currently_voting[this_cpu] = 0; + return false; /* not ourself */ + } + + /* let's suggest ourself */ + last_vote = this_cpu; + currently_voting[this_cpu] = 0; + + /* then wait until everyone else is done voting */ + for_each_cpu(i) { + while (currently_voting[i] != 0) + /* wait */; + } + + /* result */ + if (last_vote == this_cpu) + return true; /* we won */ + return false; + } + + bool vlock_unlock(void) + { + last_vote = -1; + } + + +The currently_voting[] array provides a way for the CPUs to determine +whether an election is in progress, and plays a role analogous to the +"entering" array in Lamport's bakery algorithm [1]. + +However, once the election has started, the underlying memory system +atomicity is used to pick the winner. This avoids the need for a static +priority rule to act as a tie-breaker, or any counters which could +overflow. + +As long as the last_vote variable is globally visible to all CPUs, it +will contain only one value that won't change once every CPU has cleared +its currently_voting flag. + + +Features and limitations +------------------------ + + * vlocks are not intended to be fair. In the contended case, it is the + _last_ CPU which attempts to get the lock which will be most likely + to win. + + vlocks are therefore best suited to situations where it is necessary + to pick a unique winner, but it does not matter which CPU actually + wins. + + * Like other similar mechanisms, vlocks will not scale well to a large + number of CPUs. + + vlocks can be cascaded in a voting hierarchy to permit better scaling + if necessary, as in the following hypothetical example for 4096 CPUs: + + /* first level: local election */ + my_town = towns[(this_cpu >> 4) & 0xf]; + I_won = vlock_trylock(my_town, this_cpu & 0xf); + if (I_won) { + /* we won the town election, let's go for the state */ + my_state = states[(this_cpu >> 8) & 0xf]; + I_won = vlock_lock(my_state, this_cpu & 0xf)); + if (I_won) { + /* and so on */ + I_won = vlock_lock(the_whole_country, this_cpu & 0xf]; + if (I_won) { + /* ... */ + } + vlock_unlock(the_whole_country); + } + vlock_unlock(my_state); + } + vlock_unlock(my_town); + + +ARM implementation +------------------ + +The current ARM implementation [2] contains some optimisations beyond +the basic algorithm: + + * By packing the members of the currently_voting array close together, + we can read the whole array in one transaction (providing the number + of CPUs potentially contending the lock is small enough). This + reduces the number of round-trips required to external memory. + + In the ARM implementation, this means that we can use a single load + and comparison: + + LDR Rt, [Rn] + CMP Rt, #0 + + ...in place of code equivalent to: + + LDRB Rt, [Rn] + CMP Rt, #0 + LDRBEQ Rt, [Rn, #1] + CMPEQ Rt, #0 + LDRBEQ Rt, [Rn, #2] + CMPEQ Rt, #0 + LDRBEQ Rt, [Rn, #3] + CMPEQ Rt, #0 + + This cuts down on the fast-path latency, as well as potentially + reducing bus contention in contended cases. + + The optimisation relies on the fact that the ARM memory system + guarantees coherency between overlapping memory accesses of + different sizes, similarly to many other architectures. Note that + we do not care which element of currently_voting appears in which + bits of Rt, so there is no need to worry about endianness in this + optimisation. + + If there are too many CPUs to read the currently_voting array in + one transaction then multiple transations are still required. The + implementation uses a simple loop of word-sized loads for this + case. The number of transactions is still fewer than would be + required if bytes were loaded individually. + + + In principle, we could aggregate further by using LDRD or LDM, but + to keep the code simple this was not attempted in the initial + implementation. + + + * vlocks are currently only used to coordinate between CPUs which are + unable to enable their caches yet. This means that the + implementation removes many of the barriers which would be required + when executing the algorithm in cached memory. + + packing of the currently_voting array does not work with cached + memory unless all CPUs contending the lock are cache-coherent, due + to cache writebacks from one CPU clobbering values written by other + CPUs. (Though if all the CPUs are cache-coherent, you should be + probably be using proper spinlocks instead anyway). + + + * The "no votes yet" value used for the last_vote variable is 0 (not + -1 as in the pseudocode). This allows statically-allocated vlocks + to be implicitly initialised to an unlocked state simply by putting + them in .bss. + + An offset is added to each CPU's ID for the purpose of setting this + variable, so that no CPU uses the value 0 for its ID. + + +Colophon +-------- + +Originally created and documented by Dave Martin for Linaro Limited, for +use in ARM-based big.LITTLE platforms, with review and input gratefully +received from Nicolas Pitre and Achin Gupta. Thanks to Nicolas for +grabbing most of this text out of the relevant mail thread and writing +up the pseudocode. + +Copyright (C) 2012-2013 Linaro Limited +Distributed under the terms of Version 2 of the GNU General Public +License, as defined in linux/COPYING. + + +References +---------- + +[1] Lamport, L. "A New Solution of Dijkstra's Concurrent Programming + Problem", Communications of the ACM 17, 8 (August 1974), 453-455. + + http://en.wikipedia.org/wiki/Lamport%27s_bakery_algorithm + +[2] linux/arch/arm/common/vlock.S, www.kernel.org. diff --git a/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt new file mode 100644 index 00000000000..3b8fbf3c00c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rtsm-dcscb.txt @@ -0,0 +1,19 @@ +ARM Dual Cluster System Configuration Block +------------------------------------------- + +The Dual Cluster System Configuration Block (DCSCB) provides basic +functionality for controlling clocks, resets and configuration pins in +the Dual Cluster System implemented by the Real-Time System Model (RTSM). + +Required properties: + +- compatible : should be "arm,rtsm,dcscb" + +- reg : physical base address and the size of the registers window + +Example: + + dcscb@60000000 { + compatible = "arm,rtsm,dcscb"; + reg = <0x60000000 0x1000>; + }; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1cacda426a0..a8f14c03907 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1606,6 +1606,21 @@ config HAVE_ARM_TWD help This options enables support for the ARM timer and watchdog unit +config MCPM + bool "Multi-Cluster Power Management" + depends on CPU_V7 && SMP + help + This option provides the common power management infrastructure + for (multi-)cluster based systems, such as big.LITTLE based + systems. + +config BIG_LITTLE + bool "big.LITTLE support (Experimental)" + depends on CPU_V7 && SMP + select MCPM + help + This option enables support for the big.LITTLE architecture. + choice prompt "Memory split" default VMSPLIT_3G diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c6255884cb..2fc92bf10cc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -169,7 +169,14 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ vexpress-v2p-ca15_a7.dtb \ - xenvm-4.2.dtb + xenvm-4.2.dtb \ + rtsm_ve-cortex_a9x2.dtb \ + rtsm_ve-cortex_a9x4.dtb \ + rtsm_ve-cortex_a15x1.dtb \ + rtsm_ve-cortex_a15x2.dtb \ + rtsm_ve-cortex_a15x4.dtb \ + rtsm_ve-v2p-ca15x1-ca7x1.dtb \ + rtsm_ve-v2p-ca15x4-ca7x4.dtb dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb \ diff --git a/arch/arm/boot/dts/clcd-panels.dtsi b/arch/arm/boot/dts/clcd-panels.dtsi new file mode 100644 index 00000000000..0b0ff6ead4b --- /dev/null +++ b/arch/arm/boot/dts/clcd-panels.dtsi @@ -0,0 +1,52 @@ +/* + * ARM Ltd. Versatile Express + * + */ + +/ { + panels { + panel@0 { + compatible = "panel"; + mode = "VGA"; + refresh = <60>; + xres = <640>; + yres = <480>; + pixclock = <39721>; + left_margin = <40>; + right_margin = <24>; + upper_margin = <32>; + lower_margin = <11>; + hsync_len = <96>; + vsync_len = <2>; + sync = <0>; + vmode = "FB_VMODE_NONINTERLACED"; + + tim2 = "TIM2_BCD", "TIM2_IPC"; + cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)"; + caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888"; + bpp = <16>; + }; + + panel@1 { + compatible = "panel"; + mode = "XVGA"; + refresh = <60>; + xres = <1024>; + yres = <768>; + pixclock = <15748>; + left_margin = <152>; + right_margin = <48>; + upper_margin = <23>; + lower_margin = <3>; + hsync_len = <104>; + vsync_len = <4>; + sync = <0>; + vmode = "FB_VMODE_NONINTERLACED"; + + tim2 = "TIM2_BCD", "TIM2_IPC"; + cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)"; + caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888"; + bpp = <16>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a15x1.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a15x1.dts new file mode 100644 index 00000000000..c9eee916aa7 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a15x1.dts @@ -0,0 +1,159 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x1CT + * + * RTSM_VE_Cortex_A15x1.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA15x1"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x1", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a15x2.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a15x2.dts new file mode 100644 index 00000000000..853a166e3c3 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a15x2.dts @@ -0,0 +1,165 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x2CT + * + * RTSM_VE_Cortex_A15x2.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA15x2"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x2", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a15x4.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a15x4.dts new file mode 100644 index 00000000000..c1947a3a5c8 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a15x4.dts @@ -0,0 +1,177 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x4CT + * + * RTSM_VE_Cortex_A15x4.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA15x4"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x4", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a9x2.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a9x2.dts new file mode 100644 index 00000000000..fca6b2f7967 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a9x2.dts @@ -0,0 +1,171 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA9MPx2CT + * + * RTSM_VE_Cortex_A9x2.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA9x2"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a9x2", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + scu@2c000000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x2c000000 0x58>; + }; + + timer@2c000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x2c000600 0x20>; + interrupts = <1 13 0xf04>; + }; + + watchdog@2c000620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x2c000620 0x20>; + interrupts = <1 14 0xf04>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c000100 0x100>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x04000000>, + <1 0 0x14000000 0x04000000>, + <2 0 0x18000000 0x04000000>, + <3 0 0x1c000000 0x04000000>, + <4 0 0x0c000000 0x04000000>, + <5 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a9x4.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a9x4.dts new file mode 100644 index 00000000000..fd8a6ed97a0 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a9x4.dts @@ -0,0 +1,183 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA9MPx4CT + * + * RTSM_VE_Cortex_A9x4.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA9x4"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a9x4", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + scu@2c000000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x2c000000 0x58>; + }; + + timer@2c000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x2c000600 0x20>; + interrupts = <1 13 0xf04>; + }; + + watchdog@2c000620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x2c000620 0x20>; + interrupts = <1 14 0xf04>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c000100 0x100>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x04000000>, + <1 0 0x14000000 0x04000000>, + <2 0 0x18000000 0x04000000>, + <3 0 0x1c000000 0x04000000>, + <4 0 0x0c000000 0x04000000>, + <5 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm/boot/dts/rtsm_ve-motherboard.dtsi new file mode 100644 index 00000000000..6d125662612 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-motherboard.dtsi @@ -0,0 +1,224 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * Motherboard component + * + * VEMotherBoard.lisa + */ + + motherboard { + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + arm,hbi = <0x190>; + arm,vexpress,site = <0>; + arm,v2m-memory-map = "rs1"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; + }; + + vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; + }; + + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_sysctl: sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + }; + + aaci@040000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; + }; + + mmci@050000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "mclk", "apb_pclk"; + }; + + kmi@060000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi@070000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + wdt@0f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&smbclk>; + clock-names = "wdogclk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; + }; + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupts = <14>; + clocks = <&v2m_oscclk1>, <&smbclk>; + clock-names = "v2m:oscclk1", "apb_pclk"; + mode = "VGA"; + use_dma = <0>; + framebuffer = <0x18000000 0x00180000>; + }; + }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + mcc { + compatible = "simple-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + }; + }; diff --git a/arch/arm/boot/dts/rtsm_ve-v2p-ca15x1-ca7x1.dts b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x1-ca7x1.dts new file mode 100644 index 00000000000..55d4f5ce019 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x1-ca7x1.dts @@ -0,0 +1,227 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x4CT + * ARMCortexA7x4CT + * RTSM_VE_Cortex_A15x1_A7x1.lisa + */ + +/dts-v1/; + +/memreserve/ 0xff000000 0x01000000; + +/ { + model = "RTSM_VE_CortexA15x1-A7x1"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x1_a7x1", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + clusters { + #address-cells = <1>; + #size-cells = <0>; + + cluster0: cluster@0 { + reg = <0>; +// freqs = <500000000 600000000 700000000 800000000 900000000 1000000000 1100000000 1200000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core0: core@0 { + reg = <0>; + }; + + }; + }; + + cluster1: cluster@1 { + reg = <1>; +// freqs = <350000000 400000000 500000000 600000000 700000000 800000000 900000000 1000000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core1: core@0 { + reg = <0>; + }; + + }; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + cluster = <&cluster0>; + core = <&core0>; +// clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cluster = <&cluster1>; + core = <&core1>; +// clock-frequency = <800000000>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + cci@2c090000 { + compatible = "arm,cci"; + reg = <0 0x2c090000 0 0x8000>; + }; + + dcscb@60000000 { + compatible = "arm,rtsm,dcscb"; + reg = <0 0x60000000 0 0x1000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif@0 { + compatible = "arm,gic-cpuif"; + cpuif-id = <0>; + cpu = <&cpu0>; + }; + gic-cpuif@1 { + compatible = "arm,gic-cpuif"; + cpuif-id = <1>; + cpu = <&cpu1>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-v2p-ca15x4-ca7x4.dts b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x4-ca7x4.dts new file mode 100644 index 00000000000..a2d4441568a --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x4-ca7x4.dts @@ -0,0 +1,335 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x4CT + * ARMCortexA7x4CT + * RTSM_VE_Cortex_A15x4_A7x4.lisa + */ + +/dts-v1/; + +/memreserve/ 0xff000000 0x01000000; + +/ { + model = "RTSM_VE_CortexA15x4-A7x4"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x4_a7x4", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + clusters { + #address-cells = <1>; + #size-cells = <0>; + + cluster0: cluster@0 { + reg = <0>; +// freqs = <500000000 600000000 700000000 800000000 900000000 1000000000 1100000000 1200000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core0: core@0 { + reg = <0>; + }; + + core1: core@1 { + reg = <1>; + }; + + core2: core@2 { + reg = <2>; + }; + + core3: core@3 { + reg = <3>; + }; + + }; + }; + + cluster1: cluster@1 { + reg = <1>; +// freqs = <350000000 400000000 500000000 600000000 700000000 800000000 900000000 1000000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core4: core@0 { + reg = <0>; + }; + + core5: core@1 { + reg = <1>; + }; + + core6: core@2 { + reg = <2>; + }; + + core7: core@3 { + reg = <3>; + }; + + }; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + cluster = <&cluster0>; + core = <&core0>; +// clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + cluster = <&cluster0>; + core = <&core1>; +// clock-frequency = <1000000000>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + cluster = <&cluster0>; + core = <&core2>; +// clock-frequency = <1000000000>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + cluster = <&cluster0>; + core = <&core3>; +// clock-frequency = <1000000000>; + }; + + cpu4: cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cluster = <&cluster1>; + core = <&core4>; +// clock-frequency = <800000000>; + }; + + cpu5: cpu@5 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + cluster = <&cluster1>; + core = <&core5>; +// clock-frequency = <800000000>; + }; + + cpu6: cpu@6 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + cluster = <&cluster1>; + core = <&core6>; +// clock-frequency = <800000000>; + }; + + cpu7: cpu@7 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + cluster = <&cluster1>; + core = <&core7>; +// clock-frequency = <800000000>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + cci@2c090000 { + compatible = "arm,cci"; + reg = <0 0x2c090000 0 0x8000>; + }; + + dcscb@60000000 { + compatible = "arm,rtsm,dcscb"; + reg = <0 0x60000000 0 0x1000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif@0 { + compatible = "arm,gic-cpuif"; + cpuif-id = <0>; + cpu = <&cpu0>; + }; + gic-cpuif@1 { + compatible = "arm,gic-cpuif"; + cpuif-id = <1>; + cpu = <&cpu1>; + }; + gic-cpuif@2 { + compatible = "arm,gic-cpuif"; + cpuif-id = <2>; + cpu = <&cpu2>; + }; + gic-cpuif@3 { + compatible = "arm,gic-cpuif"; + cpuif-id = <3>; + cpu = <&cpu3>; + }; + gic-cpuif@4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu4>; + }; + gic-cpuif@5 { + compatible = "arm,gic-cpuif"; + cpuif-id = <5>; + cpu = <&cpu5>; + }; + gic-cpuif@6 { + compatible = "arm,gic-cpuif"; + cpuif-id = <6>; + cpu = <&cpu6>; + }; + gic-cpuif@7 { + compatible = "arm,gic-cpuif"; + cpuif-id = <7>; + cpu = <&cpu7>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index ac870fb3fa0..9584232ee6b 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -228,6 +228,7 @@ }; clcd@1f0000 { + status = "disabled"; compatible = "arm,pl111", "arm,primecell"; reg = <0x1f0000 0x1000>; interrupts = <14>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index f1420368355..6593398c11a 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -227,6 +227,7 @@ }; clcd@1f000 { + status = "disabled"; compatible = "arm,pl111", "arm,primecell"; reg = <0x1f000 0x1000>; interrupts = <14>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 73187173117..cc6a8c0cfe3 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -9,6 +9,8 @@ /dts-v1/; +/memreserve/ 0xbf000000 0x01000000; + / { model = "V2P-CA15"; arm,hbi = <0x237>; @@ -57,6 +59,8 @@ interrupts = <0 85 4>; clocks = <&oscclk5>; clock-names = "pxlclk"; + mode = "1024x768-16@60"; + framebuffer = <0 0xff000000 0 0x01000000>; }; memory-controller@2b0a0000 { @@ -117,7 +121,7 @@ }; pmu { - compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + compatible = "arm,cortex-a15-pmu"; interrupts = <0 68 4>, <0 69 4>; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 972a56bc1d3..ec20bd48fb0 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -9,6 +9,8 @@ /dts-v1/; +/memreserve/ 0xff000000 0x01000000; + / { model = "V2P-CA15_CA7"; arm,hbi = <0x249>; @@ -29,6 +31,48 @@ i2c1 = &v2m_i2c_pcie; }; + clusters { + #address-cells = <1>; + #size-cells = <0>; + + cluster0: cluster@0 { + reg = <0>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core0: core@0 { + reg = <0>; + }; + + core1: core@1 { + reg = <1>; + }; + + }; + }; + + cluster1: cluster@1 { + reg = <1>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core2: core@0 { + reg = <0>; + }; + + core3: core@1 { + reg = <1>; + }; + + core4: core@2 { + reg = <2>; + }; + }; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -37,36 +81,51 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + cluster = <&cluster0>; + core = <&core0>; + clock-frequency = <1000000000>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; + cluster = <&cluster0>; + core = <&core1>; + clock-frequency = <1000000000>; }; cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x100>; + cluster = <&cluster1>; + core = <&core2>; + clock-frequency = <800000000>; }; cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; + cluster = <&cluster1>; + core = <&core3>; + clock-frequency = <800000000>; }; cpu4: cpu@4 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; + cluster = <&cluster1>; + core = <&core4>; + clock-frequency = <800000000>; }; }; memory@80000000 { device_type = "memory"; - reg = <0 0x80000000 0 0x40000000>; + reg = <0 0x80000000 0 0x80000000>; }; wdt@2a490000 { @@ -81,6 +140,8 @@ compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; + mode = "1024x768-16@60"; + framebuffer = <0 0xff000000 0 0x01000000>; clocks = <&oscclk5>; clock-names = "pxlclk"; }; @@ -102,6 +163,44 @@ <0 0x2c004000 0 0x2000>, <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; + + gic-cpuif@0 { + compatible = "arm,gic-cpuif"; + cpuif-id = <0>; + cpu = <&cpu0>; + }; + gic-cpuif@1 { + compatible = "arm,gic-cpuif"; + cpuif-id = <1>; + cpu = <&cpu1>; + }; + gic-cpuif@2 { + compatible = "arm,gic-cpuif"; + cpuif-id = <2>; + cpu = <&cpu2>; + }; + + gic-cpuif@3 { + compatible = "arm,gic-cpuif"; + cpuif-id = <3>; + cpu = <&cpu3>; + }; + + gic-cpuif@4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu4>; + }; + }; + + cci@2c090000 { + compatible = "arm,cci"; + reg = <0 0x2c090000 0 0x10000>; + interrupts = <0 101 4>, + <0 102 4>, + <0 103 4>, + <0 104 4>, + <0 105 4>; }; memory-controller@7ffd0000 { @@ -125,6 +224,12 @@ clock-names = "apb_pclk"; }; + spc@7fff0000 { + compatible = "arm,spc"; + reg = <0 0x7fff0000 0 0x1000>; + interrupts = <0 95 4>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 13 0xf08>, @@ -133,12 +238,21 @@ <1 10 0xf08>; }; - pmu { - compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + pmu_a15 { + compatible = "arm,cortex-a15-pmu"; + cluster = <&cluster0>; interrupts = <0 68 4>, <0 69 4>; }; + pmu_a7 { + compatible = "arm,cortex-a7-pmu"; + cluster = <&cluster1>; + interrupts = <0 128 4>, + <0 129 4>, + <0 130 4>; + }; + oscclk6a: oscclk6a { /* Reference 24MHz clock */ compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 6328cbc71d3..cf633ed6a1b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -9,6 +9,8 @@ /dts-v1/; +/memreserve/ 0xbf000000 0x01000000; + / { model = "V2P-CA5s"; arm,hbi = <0x225>; @@ -59,6 +61,8 @@ interrupts = <0 85 4>; clocks = <&oscclk3>; clock-names = "pxlclk"; + mode = "640x480-16@60"; + framebuffer = <0xbf000000 0x01000000>; }; memory-controller@2a150000 { @@ -111,7 +115,7 @@ }; pmu { - compatible = "arm,cortex-a5-pmu", "arm,cortex-a9-pmu"; + compatible = "arm,cortex-a5-pmu"; interrupts = <0 68 4>, <0 69 4>; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 1420bb14d95..663fa5927e7 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -9,6 +9,8 @@ /dts-v1/; +/include/ "clcd-panels.dtsi" + / { model = "V2P-CA9"; arm,hbi = <0x191>; @@ -73,6 +75,8 @@ interrupts = <0 44 4>; clocks = <&oscclk1>, <&oscclk2>; clock-names = "clcdclk", "apb_pclk"; + mode = "XVGA"; + use_dma = <1>; }; memory-controller@100e0000 { diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index dc8dd0de5c0..bd48ab52544 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -11,3 +11,5 @@ obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o +obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o +CFLAGS_REMOVE_mcpm_entry.o = -pg diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c new file mode 100644 index 00000000000..370236dd1a0 --- /dev/null +++ b/arch/arm/common/mcpm_entry.c @@ -0,0 +1,263 @@ +/* + * arch/arm/common/mcpm_entry.c -- entry point for multi-cluster PM + * + * Created by: Nicolas Pitre, March 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irqflags.h> + +#include <asm/mcpm.h> +#include <asm/cacheflush.h> +#include <asm/idmap.h> +#include <asm/cputype.h> + +extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER]; + +void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr) +{ + unsigned long val = ptr ? virt_to_phys(ptr) : 0; + mcpm_entry_vectors[cluster][cpu] = val; + sync_cache_w(&mcpm_entry_vectors[cluster][cpu]); +} + +static const struct mcpm_platform_ops *platform_ops; + +int __init mcpm_platform_register(const struct mcpm_platform_ops *ops) +{ + if (platform_ops) + return -EBUSY; + platform_ops = ops; + return 0; +} + +int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) +{ + if (!platform_ops) + return -EUNATCH; /* try not to shadow power_up errors */ + might_sleep(); + return platform_ops->power_up(cpu, cluster); +} + +typedef void (*phys_reset_t)(unsigned long); + +void mcpm_cpu_power_down(void) +{ + phys_reset_t phys_reset; + + BUG_ON(!platform_ops); + BUG_ON(!irqs_disabled()); + + /* + * Do this before calling into the power_down method, + * as it might not always be safe to do afterwards. + */ + setup_mm_for_reboot(); + + platform_ops->power_down(); + + /* + * It is possible for a power_up request to happen concurrently + * with a power_down request for the same CPU. In this case the + * power_down method might not be able to actually enter a + * powered down state with the WFI instruction if the power_up + * method has removed the required reset condition. The + * power_down method is then allowed to return. We must perform + * a re-entry in the kernel as if the power_up method just had + * deasserted reset on the CPU. + * + * To simplify race issues, the platform specific implementation + * must accommodate for the possibility of unordered calls to + * power_down and power_up with a usage count. Therefore, if a + * call to power_up is issued for a CPU that is not down, then + * the next call to power_down must not attempt a full shutdown + * but only do the minimum (normally disabling L1 cache and CPU + * coherency) and return just as if a concurrent power_up request + * had happened as described above. + */ + + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(mcpm_entry_point)); + + /* should never get here */ + BUG(); +} + +void mcpm_cpu_suspend(u64 expected_residency) +{ + phys_reset_t phys_reset; + + BUG_ON(!platform_ops); + BUG_ON(!irqs_disabled()); + + /* Very similar to mcpm_cpu_power_down() */ + setup_mm_for_reboot(); + platform_ops->suspend(expected_residency); + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(mcpm_entry_point)); + BUG(); +} + +int mcpm_cpu_powered_up(void) +{ + if (!platform_ops) + return -EUNATCH; + if (platform_ops->powered_up) + platform_ops->powered_up(); + return 0; +} + +struct sync_struct mcpm_sync; + +/* + * __mcpm_cpu_going_down: Indicates that the cpu is being torn down. + * This must be called at the point of committing to teardown of a CPU. + * The CPU cache (SCTRL.C bit) is expected to still be active. + */ +void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster) +{ + mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN; + sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); +} + +/* + * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the + * cluster can be torn down without disrupting this CPU. + * To avoid deadlocks, this must be called before a CPU is powered down. + * The CPU cache (SCTRL.C bit) is expected to be off. + * However L2 cache might or might not be active. + */ +void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster) +{ + dmb(); + mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN; + sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); + dsb_sev(); +} + +/* + * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section. + * @state: the final state of the cluster: + * CLUSTER_UP: no destructive teardown was done and the cluster has been + * restored to the previous state (CPU cache still active); or + * CLUSTER_DOWN: the cluster has been torn-down, ready for power-off + * (CPU cache disabled, L2 cache either enabled or disabled). + */ +void __mcpm_outbound_leave_critical(unsigned int cluster, int state) +{ + dmb(); + mcpm_sync.clusters[cluster].cluster = state; + sync_cache_w(&mcpm_sync.clusters[cluster].cluster); + dsb_sev(); +} + +/* + * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section. + * This function should be called by the last man, after local CPU teardown + * is complete. CPU cache expected to be active. + * + * Returns: + * false: the critical section was not entered because an inbound CPU was + * observed, or the cluster is already being set up; + * true: the critical section was entered: it is now safe to tear down the + * cluster. + */ +bool __mcpm_outbound_enter_critical(unsigned int cpu, unsigned int cluster) +{ + unsigned int i; + struct mcpm_sync_struct *c = &mcpm_sync.clusters[cluster]; + + /* Warn inbound CPUs that the cluster is being torn down: */ + c->cluster = CLUSTER_GOING_DOWN; + sync_cache_w(&c->cluster); + + /* Back out if the inbound cluster is already in the critical region: */ + sync_cache_r(&c->inbound); + if (c->inbound == INBOUND_COMING_UP) + goto abort; + + /* + * Wait for all CPUs to get out of the GOING_DOWN state, so that local + * teardown is complete on each CPU before tearing down the cluster. + * + * If any CPU has been woken up again from the DOWN state, then we + * shouldn't be taking the cluster down at all: abort in that case. + */ + sync_cache_r(&c->cpus); + for (i = 0; i < MAX_CPUS_PER_CLUSTER; i++) { + int cpustate; + + if (i == cpu) + continue; + + while (1) { + cpustate = c->cpus[i].cpu; + if (cpustate != CPU_GOING_DOWN) + break; + + wfe(); + sync_cache_r(&c->cpus[i].cpu); + } + + switch (cpustate) { + case CPU_DOWN: + continue; + + default: + goto abort; + } + } + + return true; + +abort: + __mcpm_outbound_leave_critical(cluster, CLUSTER_UP); + return false; +} + +int __mcpm_cluster_state(unsigned int cluster) +{ + sync_cache_r(&mcpm_sync.clusters[cluster].cluster); + return mcpm_sync.clusters[cluster].cluster; +} + +extern unsigned long mcpm_power_up_setup_phys; + +int __init mcpm_sync_init( + void (*power_up_setup)(unsigned int affinity_level)) +{ + unsigned int i, j, mpidr, this_cluster; + + BUILD_BUG_ON(MCPM_SYNC_CLUSTER_SIZE * MAX_NR_CLUSTERS != sizeof mcpm_sync); + BUG_ON((unsigned long)&mcpm_sync & (__CACHE_WRITEBACK_GRANULE - 1)); + + /* + * Set initial CPU and cluster states. + * Only one cluster is assumed to be active at this point. + */ + for (i = 0; i < MAX_NR_CLUSTERS; i++) { + mcpm_sync.clusters[i].cluster = CLUSTER_DOWN; + mcpm_sync.clusters[i].inbound = INBOUND_NOT_COMING_UP; + for (j = 0; j < MAX_CPUS_PER_CLUSTER; j++) + mcpm_sync.clusters[i].cpus[j].cpu = CPU_DOWN; + } + mpidr = read_cpuid_mpidr(); + this_cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + for_each_online_cpu(i) + mcpm_sync.clusters[this_cluster].cpus[i].cpu = CPU_UP; + mcpm_sync.clusters[this_cluster].cluster = CLUSTER_UP; + sync_cache_w(&mcpm_sync); + + if (power_up_setup) { + mcpm_power_up_setup_phys = virt_to_phys(power_up_setup); + sync_cache_w(&mcpm_power_up_setup_phys); + } + + return 0; +} diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S new file mode 100644 index 00000000000..8178705c4b2 --- /dev/null +++ b/arch/arm/common/mcpm_head.S @@ -0,0 +1,219 @@ +/* + * arch/arm/common/mcpm_head.S -- kernel entry point for multi-cluster PM + * + * Created by: Nicolas Pitre, March 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * Refer to Documentation/arm/cluster-pm-race-avoidance.txt + * for details of the synchronisation algorithms used here. + */ + +#include <linux/linkage.h> +#include <asm/mcpm.h> + +#include "vlock.h" + +.if MCPM_SYNC_CLUSTER_CPUS +.error "cpus must be the first member of struct mcpm_sync_struct" +.endif + + .macro pr_dbg string +#if defined(CONFIG_DEBUG_LL) && defined(DEBUG) + b 1901f +1902: .asciz "CPU" +1903: .asciz " cluster" +1904: .asciz ": \string" + .align +1901: adr r0, 1902b + bl printascii + mov r0, r9 + bl printhex8 + adr r0, 1903b + bl printascii + mov r0, r10 + bl printhex8 + adr r0, 1904b + bl printascii +#endif + .endm + + .arm + .align + +ENTRY(mcpm_entry_point) + + THUMB( adr r12, BSYM(1f) ) + THUMB( bx r12 ) + THUMB( .thumb ) +1: + mrc p15, 0, r0, c0, c0, 5 @ MPIDR + ubfx r9, r0, #0, #8 @ r9 = cpu + ubfx r10, r0, #8, #8 @ r10 = cluster + mov r3, #MAX_CPUS_PER_CLUSTER + mla r4, r3, r10, r9 @ r4 = canonical CPU index + cmp r4, #(MAX_CPUS_PER_CLUSTER * MAX_NR_CLUSTERS) + blo 2f + + /* We didn't expect this CPU. Try to cheaply make it quiet. */ +1: wfi + wfe + b 1b + +2: pr_dbg "kernel mcpm_entry_point\n" + + /* + * MMU is off so we need to get to various variables in a + * position independent way. + */ + adr r5, 3f + ldmia r5, {r6, r7, r8, r11} + add r6, r5, r6 @ r6 = mcpm_entry_vectors + ldr r7, [r5, r7] @ r7 = mcpm_power_up_setup_phys + add r8, r5, r8 @ r8 = mcpm_sync + add r11, r5, r11 @ r11 = first_man_locks + + mov r0, #MCPM_SYNC_CLUSTER_SIZE + mla r8, r0, r10, r8 @ r8 = sync cluster base + + @ Signal that this CPU is coming UP: + mov r0, #CPU_COMING_UP + mov r5, #MCPM_SYNC_CPU_SIZE + mla r5, r9, r5, r8 @ r5 = sync cpu address + strb r0, [r5] + + @ At this point, the cluster cannot unexpectedly enter the GOING_DOWN + @ state, because there is at least one active CPU (this CPU). + + mov r0, #VLOCK_SIZE + mla r11, r0, r10, r11 @ r11 = cluster first man lock + mov r0, r11 + mov r1, r9 @ cpu + bl vlock_trylock @ implies DMB + + cmp r0, #0 @ failed to get the lock? + bne mcpm_setup_wait @ wait for cluster setup if so + + ldrb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + cmp r0, #CLUSTER_UP @ cluster already up? + bne mcpm_setup @ if not, set up the cluster + + @ Otherwise, release the first man lock and skip setup: + mov r0, r11 + bl vlock_unlock + b mcpm_setup_complete + +mcpm_setup: + @ Control dependency implies strb not observable before previous ldrb. + + @ Signal that the cluster is being brought up: + mov r0, #INBOUND_COMING_UP + strb r0, [r8, #MCPM_SYNC_CLUSTER_INBOUND] + dmb + + @ Any CPU trying to take the cluster into CLUSTER_GOING_DOWN from this + @ point onwards will observe INBOUND_COMING_UP and abort. + + @ Wait for any previously-pending cluster teardown operations to abort + @ or complete: +mcpm_teardown_wait: + ldrb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + cmp r0, #CLUSTER_GOING_DOWN + bne first_man_setup + wfe + b mcpm_teardown_wait + +first_man_setup: + dmb + + @ If the outbound gave up before teardown started, skip cluster setup: + + cmp r0, #CLUSTER_UP + beq mcpm_setup_leave + + @ power_up_setup is now responsible for setting up the cluster: + + cmp r7, #0 + mov r0, #1 @ second (cluster) affinity level + blxne r7 @ Call power_up_setup if defined + dmb + + mov r0, #CLUSTER_UP + strb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + dmb + +mcpm_setup_leave: + @ Leave the cluster setup critical section: + + mov r0, #INBOUND_NOT_COMING_UP + strb r0, [r8, #MCPM_SYNC_CLUSTER_INBOUND] + dsb + sev + + mov r0, r11 + bl vlock_unlock @ implies DMB + b mcpm_setup_complete + + @ In the contended case, non-first men wait here for cluster setup + @ to complete: +mcpm_setup_wait: + ldrb r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER] + cmp r0, #CLUSTER_UP + wfene + bne mcpm_setup_wait + dmb + +mcpm_setup_complete: + @ If a platform-specific CPU setup hook is needed, it is + @ called from here. + + cmp r7, #0 + mov r0, #0 @ first (CPU) affinity level + blxne r7 @ Call power_up_setup if defined + dmb + + @ Mark the CPU as up: + + mov r0, #CPU_UP + strb r0, [r5] + + @ Observability order of CPU_UP and opening of the gate does not matter. + +mcpm_entry_gated: + ldr r5, [r6, r4, lsl #2] @ r5 = CPU entry vector + cmp r5, #0 + wfeeq + beq mcpm_entry_gated + dmb + + pr_dbg "released\n" + bx r5 + + .align 2 + +3: .word mcpm_entry_vectors - . + .word mcpm_power_up_setup_phys - 3b + .word mcpm_sync - 3b + .word first_man_locks - 3b + +ENDPROC(mcpm_entry_point) + + .bss + + .align CACHE_WRITEBACK_ORDER + .type first_man_locks, #object +first_man_locks: + .space VLOCK_SIZE * MAX_NR_CLUSTERS + .align CACHE_WRITEBACK_ORDER + + .type mcpm_entry_vectors, #object +ENTRY(mcpm_entry_vectors) + .space 4 * MAX_NR_CLUSTERS * MAX_CPUS_PER_CLUSTER + + .type mcpm_power_up_setup_phys, #object +ENTRY(mcpm_power_up_setup_phys) + .space 4 @ set by mcpm_sync_init() diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c new file mode 100644 index 00000000000..3caed0db698 --- /dev/null +++ b/arch/arm/common/mcpm_platsmp.c @@ -0,0 +1,89 @@ +/* + * linux/arch/arm/mach-vexpress/mcpm_platsmp.c + * + * Created by: Nicolas Pitre, November 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Code to handle secondary CPU bringup and hotplug for the cluster power API. + */ + +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/spinlock.h> + +#include <asm/mcpm.h> +#include <asm/smp.h> +#include <asm/smp_plat.h> + +static void __init simple_smp_init_cpus(void) +{ +} + +static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned int mpidr, pcpu, pcluster, ret; + extern void secondary_startup(void); + + mpidr = cpu_logical_map(cpu); + pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: logical CPU %d is physical CPU %d cluster %d\n", + __func__, cpu, pcpu, pcluster); + + mcpm_set_entry_vector(pcpu, pcluster, NULL); + ret = mcpm_cpu_power_up(pcpu, pcluster); + if (ret) + return ret; + mcpm_set_entry_vector(pcpu, pcluster, secondary_startup); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + dsb_sev(); + return 0; +} + +static void __cpuinit mcpm_secondary_init(unsigned int cpu) +{ + mcpm_cpu_powered_up(); +} + +#ifdef CONFIG_HOTPLUG_CPU + +static int mcpm_cpu_disable(unsigned int cpu) +{ + /* + * We assume all CPUs may be shut down. + * This would be the hook to use for eventual Secure + * OS migration requests as described in the PSCI spec. + */ + return 0; +} + +static void mcpm_cpu_die(unsigned int cpu) +{ + unsigned int mpidr, pcpu, pcluster; + mpidr = read_cpuid_mpidr(); + pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + mcpm_set_entry_vector(pcpu, pcluster, NULL); + mcpm_cpu_power_down(); +} + +#endif + +static struct smp_operations __initdata mcpm_smp_ops = { + .smp_init_cpus = simple_smp_init_cpus, + .smp_boot_secondary = mcpm_boot_secondary, + .smp_secondary_init = mcpm_secondary_init, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = mcpm_cpu_disable, + .cpu_die = mcpm_cpu_die, +#endif +}; + +void __init mcpm_smp_set_ops(void) +{ + smp_set_ops(&mcpm_smp_ops); +} diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S new file mode 100644 index 00000000000..ff198583f68 --- /dev/null +++ b/arch/arm/common/vlock.S @@ -0,0 +1,108 @@ +/* + * vlock.S - simple voting lock implementation for ARM + * + * Created by: Dave Martin, 2012-08-16 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * This algorithm is described in more detail in + * Documentation/arm/vlocks.txt. + */ + +#include <linux/linkage.h> +#include "vlock.h" + +/* Select different code if voting flags can fit in a single word. */ +#if VLOCK_VOTING_SIZE > 4 +#define FEW(x...) +#define MANY(x...) x +#else +#define FEW(x...) x +#define MANY(x...) +#endif + +@ voting lock for first-man coordination + +.macro voting_begin rbase:req, rcpu:req, rscratch:req + mov \rscratch, #1 + strb \rscratch, [\rbase, \rcpu] + dmb +.endm + +.macro voting_end rbase:req, rcpu:req, rscratch:req + dmb + mov \rscratch, #0 + strb \rscratch, [\rbase, \rcpu] + dsb + sev +.endm + +/* + * The vlock structure must reside in Strongly-Ordered or Device memory. + * This implementation deliberately eliminates most of the barriers which + * would be required for other memory types, and assumes that independent + * writes to neighbouring locations within a cacheline do not interfere + * with one another. + */ + +@ r0: lock structure base +@ r1: CPU ID (0-based index within cluster) +ENTRY(vlock_trylock) + add r1, r1, #VLOCK_VOTING_OFFSET + + voting_begin r0, r1, r2 + + ldrb r2, [r0, #VLOCK_OWNER_OFFSET] @ check whether lock is held + cmp r2, #VLOCK_OWNER_NONE + bne trylock_fail @ fail if so + + @ Control dependency implies strb not observable before previous ldrb. + + strb r1, [r0, #VLOCK_OWNER_OFFSET] @ submit my vote + + voting_end r0, r1, r2 @ implies DMB + + @ Wait for the current round of voting to finish: + + MANY( mov r3, #VLOCK_VOTING_OFFSET ) +0: + MANY( ldr r2, [r0, r3] ) + FEW( ldr r2, [r0, #VLOCK_VOTING_OFFSET] ) + cmp r2, #0 + wfene + bne 0b + MANY( add r3, r3, #4 ) + MANY( cmp r3, #VLOCK_VOTING_OFFSET + VLOCK_VOTING_SIZE ) + MANY( bne 0b ) + + @ Check who won: + + dmb + ldrb r2, [r0, #VLOCK_OWNER_OFFSET] + eor r0, r1, r2 @ zero if I won, else nonzero + bx lr + +trylock_fail: + voting_end r0, r1, r2 + mov r0, #1 @ nonzero indicates that I lost + bx lr +ENDPROC(vlock_trylock) + +@ r0: lock structure base +ENTRY(vlock_unlock) + dmb + mov r1, #VLOCK_OWNER_NONE + strb r1, [r0, #VLOCK_OWNER_OFFSET] + dsb + sev + bx lr +ENDPROC(vlock_unlock) diff --git a/arch/arm/common/vlock.h b/arch/arm/common/vlock.h new file mode 100644 index 00000000000..3b441475a59 --- /dev/null +++ b/arch/arm/common/vlock.h @@ -0,0 +1,29 @@ +/* + * vlock.h - simple voting lock implementation + * + * Created by: Dave Martin, 2012-08-16 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __VLOCK_H +#define __VLOCK_H + +#include <asm/mcpm.h> + +/* Offsets and sizes are rounded to a word (4 bytes) */ +#define VLOCK_OWNER_OFFSET 0 +#define VLOCK_VOTING_OFFSET 4 +#define VLOCK_VOTING_SIZE ((MAX_CPUS_PER_CLUSTER + 3) / 4 * 4) +#define VLOCK_SIZE (VLOCK_VOTING_OFFSET + VLOCK_VOTING_SIZE) +#define VLOCK_OWNER_NONE 0 + +#endif /* ! __VLOCK_H */ diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index e1489c54cd1..bff71388e72 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -363,4 +363,79 @@ static inline void flush_cache_vunmap(unsigned long start, unsigned long end) flush_cache_all(); } +/* + * Memory synchronization helpers for mixed cached vs non cached accesses. + * + * Some synchronization algorithms have to set states in memory with the + * cache enabled or disabled depending on the code path. It is crucial + * to always ensure proper cache maintenance to update main memory right + * away in that case. + * + * Any cached write must be followed by a cache clean operation. + * Any cached read must be preceded by a cache invalidate operation. + * Yet, in the read case, a cache flush i.e. atomic clean+invalidate + * operation is needed to avoid discarding possible concurrent writes to the + * accessed memory. + * + * Also, in order to prevent a cached writer from interfering with an + * adjacent non-cached writer, each state variable must be located to + * a separate cache line. + */ + +/* + * This needs to be >= the max cache writeback size of all + * supported platforms included in the current kernel configuration. + * This is used to align state variables to their own cache lines. + */ +#define __CACHE_WRITEBACK_ORDER 6 /* guessed from existing platforms */ +#define __CACHE_WRITEBACK_GRANULE (1 << __CACHE_WRITEBACK_ORDER) + +/* + * There is no __cpuc_clean_dcache_area but we use it anyway for + * code intent clarity, and alias it to __cpuc_flush_dcache_area. + */ +#define __cpuc_clean_dcache_area __cpuc_flush_dcache_area + +/* + * Ensure preceding writes to *p by this CPU are visible to + * subsequent reads by other CPUs: + */ +static inline void __sync_cache_range_w(volatile void *p, size_t size) +{ + char *_p = (char *)p; + + __cpuc_clean_dcache_area(_p, size); + outer_clean_range(__pa(_p), __pa(_p + size)); +} + +/* + * Ensure preceding writes to *p by other CPUs are visible to + * subsequent reads by this CPU. We must be careful not to + * discard data simultaneously written by another CPU, hence the + * usage of flush rather than invalidate operations. + */ +static inline void __sync_cache_range_r(volatile void *p, size_t size) +{ + char *_p = (char *)p; + +#ifdef CONFIG_OUTER_CACHE + if (outer_cache.flush_range) { + /* + * Ensure dirty data migrated from other CPUs into our cache + * are cleaned out safely before the outer cache is cleaned: + */ + __cpuc_clean_dcache_area(_p, size); + + /* Clean and invalidate stale data for *p from outer ... */ + outer_flush_range(__pa(_p), __pa(_p + size)); + } +#endif + + /* ... and inner cache: */ + __cpuc_flush_dcache_area(_p, size); +} + +#define sync_cache_w(ptr) __sync_cache_range_w(ptr, sizeof *(ptr)) +#define sync_cache_r(ptr) __sync_cache_range_r(ptr, sizeof *(ptr)) + #endif diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index 5ef4d8015a6..ce4d01c03e6 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -59,6 +59,20 @@ static inline void set_cr(unsigned int val) isb(); } +static inline unsigned int get_auxcr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 1 @ get AUXCR" : "=r" (val)); + return val; +} + +static inline void set_auxcr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 1 @ set AUXCR" + : : "r" (val)); + isb(); +} + #ifndef CONFIG_SMP extern void adjust_cr(unsigned long mask, unsigned long set); #endif diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 35c21c375d8..53c15dec7af 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -30,6 +30,11 @@ extern void asm_do_IRQ(unsigned int, struct pt_regs *); void handle_IRQ(unsigned int, struct pt_regs *); void init_IRQ(void); +#ifdef CONFIG_MULTI_IRQ_HANDLER +extern void (*handle_arch_irq)(struct pt_regs *); +extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); +#endif + #endif #endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 308ad7d6f98..75bf07910b8 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <linux/types.h> + #ifndef __ASSEMBLY__ struct tag; @@ -16,8 +18,10 @@ struct pt_regs; struct smp_operations; #ifdef CONFIG_SMP #define smp_ops(ops) (&(ops)) +#define smp_init_ops(ops) (&(ops)) #else #define smp_ops(ops) (struct smp_operations *)NULL +#define smp_init_ops(ops) (bool (*)(void))NULL #endif struct machine_desc { @@ -41,6 +45,7 @@ struct machine_desc { unsigned char reserve_lp2 :1; /* never has lp2 */ char restart_mode; /* default restart mode */ struct smp_operations *smp; /* SMP operations */ + bool (*smp_init)(void); void (*fixup)(struct tag *, char **, struct meminfo *); void (*reserve)(void);/* reserve mem blocks */ diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index 18c88302333..2092ee1e130 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -20,11 +20,6 @@ struct seq_file; extern void init_FIQ(int); extern int show_fiq_list(struct seq_file *, int); -#ifdef CONFIG_MULTI_IRQ_HANDLER -extern void (*handle_arch_irq)(struct pt_regs *); -extern void set_handle_irq(void (*handle_irq)(struct pt_regs *)); -#endif - /* * This is for easy migration, but should be changed in the source */ @@ -35,35 +30,4 @@ do { \ raw_spin_unlock(&desc->lock); \ } while(0) -#ifndef __ASSEMBLY__ -/* - * Entry/exit functions for chained handlers where the primary IRQ chip - * may implement either fasteoi or level-trigger flow control. - */ -static inline void chained_irq_enter(struct irq_chip *chip, - struct irq_desc *desc) -{ - /* FastEOI controllers require no action on entry. */ - if (chip->irq_eoi) - return; - - if (chip->irq_mask_ack) { - chip->irq_mask_ack(&desc->irq_data); - } else { - chip->irq_mask(&desc->irq_data); - if (chip->irq_ack) - chip->irq_ack(&desc->irq_data); - } -} - -static inline void chained_irq_exit(struct irq_chip *chip, - struct irq_desc *desc) -{ - if (chip->irq_eoi) - chip->irq_eoi(&desc->irq_data); - else - chip->irq_unmask(&desc->irq_data); -} -#endif - #endif diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h new file mode 100644 index 00000000000..0f7b7620e9a --- /dev/null +++ b/arch/arm/include/asm/mcpm.h @@ -0,0 +1,209 @@ +/* + * arch/arm/include/asm/mcpm.h + * + * Created by: Nicolas Pitre, April 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MCPM_H +#define MCPM_H + +/* + * Maximum number of possible clusters / CPUs per cluster. + * + * This should be sufficient for quite a while, while keeping the + * (assembly) code simpler. When this starts to grow then we'll have + * to consider dynamic allocation. + */ +#define MAX_CPUS_PER_CLUSTER 4 +#define MAX_NR_CLUSTERS 2 + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <asm/cacheflush.h> + +/* + * Platform specific code should use this symbol to set up secondary + * entry location for processors to use when released from reset. + */ +extern void mcpm_entry_point(void); + +/* + * This is used to indicate where the given CPU from given cluster should + * branch once it is ready to re-enter the kernel using ptr, or NULL if it + * should be gated. A gated CPU is held in a WFE loop until its vector + * becomes non NULL. + */ +void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr); + +/* + * CPU/cluster power operations API for higher subsystems to use. + */ + +/** + * mcpm_cpu_power_up - make given CPU in given cluster runable + * + * @cpu: CPU number within given cluster + * @cluster: cluster number for the CPU + * + * The identified CPU is brought out of reset. If the cluster was powered + * down then it is brought up as well, taking care not to let the other CPUs + * in the cluster run, and ensuring appropriate cluster setup. + * + * Caller must ensure the appropriate entry vector is initialized with + * mcpm_set_entry_vector() prior to calling this. + * + * This must be called in a sleepable context. However, the implementation + * is strongly encouraged to return early and let the operation happen + * asynchronously, especially when significant delays are expected. + * + * If the operation cannot be performed then an error code is returned. + */ +int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster); + +/** + * mcpm_cpu_power_down - power the calling CPU down + * + * The calling CPU is powered down. + * + * If this CPU is found to be the "last man standing" in the cluster + * then the cluster is prepared for power-down too. + * + * This must be called with interrupts disabled. + * + * This does not return. Re-entry in the kernel is expected via + * mcpm_entry_point. + */ +void mcpm_cpu_power_down(void); + +/** + * mcpm_cpu_suspend - bring the calling CPU in a suspended state + * + * @expected_residency: duration in microseconds the CPU is expected + * to remain suspended, or 0 if unknown/infinity. + * + * The calling CPU is suspended. The expected residency argument is used + * as a hint by the platform specific backend to implement the appropriate + * sleep state level according to the knowledge it has on wake-up latency + * for the given hardware. + * + * If this CPU is found to be the "last man standing" in the cluster + * then the cluster may be prepared for power-down too, if the expected + * residency makes it worthwhile. + * + * This must be called with interrupts disabled. + * + * This does not return. Re-entry in the kernel is expected via + * mcpm_entry_point. + */ +void mcpm_cpu_suspend(u64 expected_residency); + +/** + * mcpm_cpu_powered_up - housekeeping workafter a CPU has been powered up + * + * This lets the platform specific backend code perform needed housekeeping + * work. This must be called by the newly activated CPU as soon as it is + * fully operational in kernel space, before it enables interrupts. + * + * If the operation cannot be performed then an error code is returned. + */ +int mcpm_cpu_powered_up(void); + +/* + * Platform specific methods used in the implementation of the above API. + */ +struct mcpm_platform_ops { + int (*power_up)(unsigned int cpu, unsigned int cluster); + void (*power_down)(void); + void (*suspend)(u64); + void (*powered_up)(void); +}; + +/** + * mcpm_platform_register - register platform specific power methods + * + * @ops: mcpm_platform_ops structure to register + * + * An error is returned if the registration has been done previously. + */ +int __init mcpm_platform_register(const struct mcpm_platform_ops *ops); + +/* Synchronisation structures for coordinating safe cluster setup/teardown: */ + +/* + * When modifying this structure, make sure you update the MCPM_SYNC_ defines + * to match. + */ +struct mcpm_sync_struct { + /* individual CPU states */ + struct { + s8 cpu __aligned(__CACHE_WRITEBACK_GRANULE); + } cpus[MAX_CPUS_PER_CLUSTER]; + + /* cluster state */ + s8 cluster __aligned(__CACHE_WRITEBACK_GRANULE); + + /* inbound-side state */ + s8 inbound __aligned(__CACHE_WRITEBACK_GRANULE); +}; + +struct sync_struct { + struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS]; +}; + +extern unsigned long sync_phys; /* physical address of *mcpm_sync */ + +void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster); +void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster); +void __mcpm_outbound_leave_critical(unsigned int cluster, int state); +bool __mcpm_outbound_enter_critical(unsigned int this_cpu, unsigned int cluster); +int __mcpm_cluster_state(unsigned int cluster); + +int __init mcpm_sync_init( + void (*power_up_setup)(unsigned int affinity_level)); + +void __init mcpm_smp_set_ops(void); + +#else + +/* + * asm-offsets.h causes trouble when included in .c files, and cacheflush.h + * cannot be included in asm files. Let's work around the conflict like this. + */ +#include <asm/asm-offsets.h> +#define __CACHE_WRITEBACK_GRANULE CACHE_WRITEBACK_GRANULE + +#endif /* ! __ASSEMBLY__ */ + +/* Definitions for mcpm_sync_struct */ +#define CPU_DOWN 0x11 +#define CPU_COMING_UP 0x12 +#define CPU_UP 0x13 +#define CPU_GOING_DOWN 0x14 + +#define CLUSTER_DOWN 0x21 +#define CLUSTER_UP 0x22 +#define CLUSTER_GOING_DOWN 0x23 + +#define INBOUND_NOT_COMING_UP 0x31 +#define INBOUND_COMING_UP 0x32 + +/* + * Offsets for the mcpm_sync_struct members, for use in asm. + * We don't want to make them global to the kernel via asm-offsets.c. + */ +#define MCPM_SYNC_CLUSTER_CPUS 0 +#define MCPM_SYNC_CPU_SIZE __CACHE_WRITEBACK_GRANULE +#define MCPM_SYNC_CLUSTER_CLUSTER \ + (MCPM_SYNC_CLUSTER_CPUS + MCPM_SYNC_CPU_SIZE * MAX_CPUS_PER_CLUSTER) +#define MCPM_SYNC_CLUSTER_INBOUND \ + (MCPM_SYNC_CLUSTER_CLUSTER + __CACHE_WRITEBACK_GRANULE) +#define MCPM_SYNC_CLUSTER_SIZE \ + (MCPM_SYNC_CLUSTER_INBOUND + __CACHE_WRITEBACK_GRANULE) + +#endif diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h index ce0dbe7c162..a079cbee427 100644 --- a/arch/arm/include/asm/psci.h +++ b/arch/arm/include/asm/psci.h @@ -16,6 +16,10 @@ #define PSCI_POWER_STATE_TYPE_STANDBY 0 #define PSCI_POWER_STATE_TYPE_POWER_DOWN 1 +#define PSCI_POWER_STATE_AFFINITY_LEVEL0 0 +#define PSCI_POWER_STATE_AFFINITY_LEVEL1 1 +#define PSCI_POWER_STATE_AFFINITY_LEVEL2 2 +#define PSCI_POWER_STATE_AFFINITY_LEVEL3 3 struct psci_power_state { u16 id; @@ -33,4 +37,12 @@ struct psci_operations { extern struct psci_operations psci_ops; +#ifdef CONFIG_ARM_PSCI +extern int __init psci_probe(void); +#else +static inline int psci_probe(void) +{ + return -ENODEV; +} +#endif #endif /* __ASM_ARM_PSCI_H */ diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 923eec7105c..3f088225e71 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -149,6 +149,10 @@ int main(void) DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL); DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE); DEFINE(DMA_FROM_DEVICE, DMA_FROM_DEVICE); + BLANK(); + DEFINE(CACHE_WRITEBACK_ORDER, __CACHE_WRITEBACK_ORDER); + DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE); + BLANK(); #ifdef CONFIG_KVM_ARM_HOST DEFINE(VCPU_KVM, offsetof(struct kvm_vcpu, kvm)); DEFINE(VCPU_MIDR, offsetof(struct kvm_vcpu, arch.midr)); diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c index 36531643cc2..1180801468d 100644 --- a/arch/arm/kernel/psci.c +++ b/arch/arm/kernel/psci.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/of.h> +#include <linux/string.h> #include <asm/compiler.h> #include <asm/errno.h> @@ -26,6 +27,11 @@ struct psci_operations psci_ops; +/* Type of psci support. Currently can only be enabled or disabled */ +#define PSCI_SUP_DISABLED 0 +#define PSCI_SUP_ENABLED 1 + +static unsigned int psci; static int (*invoke_psci_fn)(u32, u32, u32, u32); enum psci_function { @@ -42,6 +48,7 @@ static u32 psci_function_id[PSCI_FN_MAX]; #define PSCI_RET_EOPNOTSUPP -1 #define PSCI_RET_EINVAL -2 #define PSCI_RET_EPERM -3 +#define PSCI_RET_EALREADYON -4 static int psci_to_linux_errno(int errno) { @@ -54,6 +61,8 @@ static int psci_to_linux_errno(int errno) return -EINVAL; case PSCI_RET_EPERM: return -EPERM; + case PSCI_RET_EALREADYON: + return -EAGAIN; }; return -EINVAL; @@ -164,6 +173,9 @@ static int __init psci_init(void) const char *method; u32 id; + if (psci == PSCI_SUP_DISABLED) + return 0; + np = of_find_matching_node(NULL, psci_of_match); if (!np) return 0; @@ -209,3 +221,33 @@ out_put_node: return 0; } early_initcall(psci_init); + +int __init psci_probe(void) +{ + struct device_node *np; + int ret = -ENODEV; + + if (psci == PSCI_SUP_ENABLED) { + np = of_find_matching_node(NULL, psci_of_match); + if (np) + ret = 0; + } + + of_node_put(np); + return ret; +} + +static int __init early_psci(char *val) +{ + int ret = 0; + + if (strcmp(val, "enable") == 0) + psci = PSCI_SUP_ENABLED; + else if (strcmp(val, "disable") == 0) + psci = PSCI_SUP_DISABLED; + else + ret = -EINVAL; + + return ret; +} +early_param("psci", early_psci); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index f44e249154a..3f0d5e969ef 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -402,7 +402,7 @@ static void __init feat_v6_fixup(void) * * cpu_init sets up the per-CPU stacks. */ -void cpu_init(void) +void notrace cpu_init(void) { unsigned int cpu = smp_processor_id(); struct stack *stk = &stacks[cpu]; @@ -800,7 +800,10 @@ void __init setup_arch(char **cmdline_p) arm_dt_init_cpu_maps(); #ifdef CONFIG_SMP if (is_smp()) { - smp_set_ops(mdesc->smp); + if (!mdesc->smp_init || !mdesc->smp_init()) { + if(mdesc->smp) + smp_set_ops(mdesc->smp); + } smp_init_cpus(); } #endif diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index c5d7e1e9d75..a5afcf76550 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -22,10 +22,9 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/of_address.h> -#include <asm/mach/irq.h> - #include <mach/hardware.h> #include <mach/at91_pio.h> diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index d63d399c7ba..7bc0f9aa8b3 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -26,6 +26,7 @@ #include <linux/irqchip.h> #include <linux/of_address.h> #include <linux/irqchip/arm-gic.h> +#include <linux/irqchip/chained_irq.h> #include <asm/proc-fns.h> #include <asm/exception.h> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 60f7c5be057..95e04bd5813 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,7 +20,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -76,13 +75,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit exynos_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index 8797a700172..a984573e0d0 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -17,7 +17,6 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/smp_scu.h> @@ -25,11 +24,6 @@ extern void secondary_startup(void); -static void __cpuinit highbank_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { highbank_set_cpu_jump(cpu, secondary_startup); @@ -67,7 +61,6 @@ static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations highbank_smp_ops __initdata = { .smp_init_cpus = highbank_smp_init_cpus, .smp_prepare_cpus = highbank_smp_prepare_cpus, - .smp_secondary_init = highbank_secondary_init, .smp_boot_secondary = highbank_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = highbank_cpu_die, diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 7c0b03f67b0..77e9a25ed0f 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -52,16 +51,6 @@ void imx_scu_standby_enable(void) writel_relaxed(val, scu_base); } -static void __cpuinit imx_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup); @@ -96,7 +85,6 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations imx_smp_ops __initdata = { .smp_init_cpus = imx_smp_init_cpus, .smp_prepare_cpus = imx_smp_prepare_cpus, - .smp_secondary_init = imx_secondary_init, .smp_boot_secondary = imx_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = imx_cpu_die, diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 42932865416..00cdb0a5dac 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -15,7 +15,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/cputype.h> @@ -42,13 +41,6 @@ static inline int get_core_count(void) static void __cpuinit msm_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index d9727218dd0..e7a449758ab 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -67,13 +67,6 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu) 4, 0, 0, 0, 0, 0); /* - * If any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index 4b788310f6a..c7c92e78f0c 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -11,7 +11,6 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/page.h> #include <asm/mach/map.h> #include <asm/smp_plat.h> @@ -49,13 +48,6 @@ void __init sirfsoc_map_scu(void) static void __cpuinit sirfsoc_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c index d8ba9bee4c7..6b0b6047785 100644 --- a/arch/arm/mach-s3c24xx/irq.c +++ b/arch/arm/mach-s3c24xx/irq.c @@ -25,6 +25,7 @@ #include <linux/ioport.h> #include <linux/device.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 953eb1f9388..384e27dd360 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/emev2.h> #include <asm/smp_plat.h> @@ -85,11 +84,6 @@ static int __maybe_unused emev2_cpu_kill(unsigned int cpu) } -static void __cpuinit emev2_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { cpu = cpu_logical_map(cpu); @@ -124,7 +118,6 @@ static void __init emev2_smp_init_cpus(void) struct smp_operations emev2_smp_ops __initdata = { .smp_init_cpus = emev2_smp_init_cpus, .smp_prepare_cpus = emev2_smp_prepare_cpus, - .smp_secondary_init = emev2_secondary_init, .smp_boot_secondary = emev2_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = emev2_cpu_kill, diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 3a4acf23edc..994906560ed 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <mach/r8a7779.h> #include <asm/smp_plat.h> @@ -132,11 +131,6 @@ static int __maybe_unused r8a7779_cpu_kill(unsigned int cpu) } -static void __cpuinit r8a7779_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { struct r8a7779_pm_ch *ch = NULL; @@ -186,7 +180,6 @@ static void __init r8a7779_smp_init_cpus(void) struct smp_operations r8a7779_smp_ops __initdata = { .smp_init_cpus = r8a7779_smp_init_cpus, .smp_prepare_cpus = r8a7779_smp_prepare_cpus, - .smp_secondary_init = r8a7779_secondary_init, .smp_boot_secondary = r8a7779_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = r8a7779_cpu_kill, diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index acb46a94ccd..d0f9aca2247 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -23,7 +23,6 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/delay.h> -#include <linux/irqchip/arm-gic.h> #include <mach/common.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -59,11 +58,6 @@ static unsigned int __init sh73a0_get_core_count(void) return scu_get_core_count(scu_base); } -static void __cpuinit sh73a0_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) { cpu = cpu_logical_map(cpu); @@ -138,7 +132,6 @@ static void sh73a0_cpu_die(unsigned int cpu) struct smp_operations sh73a0_smp_ops __initdata = { .smp_init_cpus = sh73a0_smp_init_cpus, .smp_prepare_cpus = sh73a0_smp_prepare_cpus, - .smp_secondary_init = sh73a0_secondary_init, .smp_boot_secondary = sh73a0_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = sh73a0_cpu_kill, diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 84c60fa8daa..ca14d1d5ac7 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -22,7 +22,6 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> @@ -33,16 +32,6 @@ extern void __iomem *sys_manager_base_addr; extern void __iomem *rst_manager_base_addr; -static void __cpuinit socfpga_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); -} - static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; @@ -109,7 +98,6 @@ static void socfpga_cpu_die(unsigned int cpu) struct smp_operations socfpga_smp_ops __initdata = { .smp_init_cpus = socfpga_smp_init_cpus, .smp_prepare_cpus = socfpga_smp_prepare_cpus, - .smp_secondary_init = socfpga_secondary_init, .smp_boot_secondary = socfpga_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = socfpga_cpu_die, diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c index af4ade61cd9..551c69c9a22 100644 --- a/arch/arm/mach-spear13xx/platsmp.c +++ b/arch/arm/mach-spear13xx/platsmp.c @@ -15,7 +15,6 @@ #include <linux/jiffies.h> #include <linux/io.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_scu.h> #include <mach/spear.h> @@ -28,13 +27,6 @@ static void __iomem *scu_base = IOMEM(VA_SCU_BASE); static void __cpuinit spear13xx_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 2c6b3d55213..9348d3c496a 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -18,7 +18,6 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <linux/clk/tegra.h> #include <asm/cacheflush.h> @@ -44,13 +43,6 @@ static cpumask_t tegra_cpu_init_mask; static void __cpuinit tegra_secondary_init(unsigned int cpu) { - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 18f7af339dc..152b1309b9a 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -16,7 +16,6 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -58,13 +57,6 @@ static DEFINE_SPINLOCK(boot_lock); static void __cpuinit ux500_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 8d997ee05b6..8aac82faa67 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -52,6 +52,15 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" +config ARCH_VEXPRESS_DCSCB + bool "Dual Cluster System Control Block (DCSCB) support" + depends on MCPM + select ARM_CCI + help + Support for the Dual Cluster System Configuration Block (DCSCB). + This is needed to provide CPU and cluster power management + on RTSM. + config ARCH_VEXPRESS_TC2 bool "TC2 cluster management" depends on MCPM diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index a95282125eb..fb3799e5d22 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -6,6 +6,8 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ obj-y := v2m.o reset.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o +obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o +CFLAGS_REMOVE_dcscb.o = -pg obj-$(CONFIG_ARCH_VEXPRESS_TC2) += tc2_pm.o tc2_pm_setup.o CFLAGS_REMOVE_tc2_pm.o = -pg obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index f134cd4a85f..bde4374ab6d 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -6,6 +6,8 @@ void vexpress_dt_smp_map_io(void); +bool vexpress_smp_init_ops(void); + extern struct smp_operations vexpress_smp_ops; extern void vexpress_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c new file mode 100644 index 00000000000..0dc3caca227 --- /dev/null +++ b/arch/arm/mach-vexpress/dcscb.c @@ -0,0 +1,256 @@ +/* + * arch/arm/mach-vexpress/dcscb.c - Dual Cluster System Configuration Block + * + * Created by: Nicolas Pitre, May 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/of_address.h> +#include <linux/vexpress.h> +#include <linux/arm-cci.h> + +#include <asm/mcpm.h> +#include <asm/proc-fns.h> +#include <asm/cacheflush.h> +#include <asm/cputype.h> +#include <asm/cp15.h> +#include <asm/psci.h> + + +#define RST_HOLD0 0x0 +#define RST_HOLD1 0x4 +#define SYS_SWRESET 0x8 +#define RST_STAT0 0xc +#define RST_STAT1 0x10 +#define EAG_CFG_R 0x20 +#define EAG_CFG_W 0x24 +#define KFC_CFG_R 0x28 +#define KFC_CFG_W 0x2c +#define DCS_CFG_R 0x30 + +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() after its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t dcscb_lock = __ARCH_SPIN_LOCK_UNLOCKED; + +static void __iomem *dcscb_base; +static int dcscb_use_count[4][2]; +static int dcscb_mcpm_cpu_mask[2]; + +static int dcscb_power_up(unsigned int cpu, unsigned int cluster) +{ + unsigned int rst_hold, cpumask = (1 << cpu); + unsigned int mcpm_mask = dcscb_mcpm_cpu_mask[cluster]; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cpu >= 4 || cluster >= 2) + return -EINVAL; + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&dcscb_lock); + + dcscb_use_count[cpu][cluster]++; + if (dcscb_use_count[cpu][cluster] == 1) { + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + if (rst_hold & (1 << 8)) { + /* remove cluster reset and add individual CPU's reset */ + rst_hold &= ~(1 << 8); + rst_hold |= mcpm_mask; + } + rst_hold &= ~(cpumask | (cpumask << 4)); + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); + } else if (dcscb_use_count[cpu][cluster] != 2) { + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG(); + } + + arch_spin_unlock(&dcscb_lock); + local_irq_enable(); + + return 0; +} + +static void dcscb_power_down(void) +{ + unsigned int mpidr, cpu, cluster, rst_hold, cpumask, mcpm_mask; + bool last_man = false, skip_wfi = false; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + cpumask = (1 << cpu); + mcpm_mask = dcscb_mcpm_cpu_mask[cluster]; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= 4 || cluster >= 2); + + __mcpm_cpu_going_down(cpu, cluster); + + arch_spin_lock(&dcscb_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + dcscb_use_count[cpu][cluster]--; + if (dcscb_use_count[cpu][cluster] == 0) { + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + rst_hold |= cpumask; + if (((rst_hold | (rst_hold >> 4)) & mcpm_mask) == mcpm_mask) { + rst_hold |= (1 << 8); + last_man = true; + } + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); + } else if (dcscb_use_count[cpu][cluster] == 1) { + /* + * A power_up request went ahead of us. + * Even if we do not want to shut this CPU down, + * the caller expects a certain state as if the WFI + * was aborted. So let's continue with cache cleaning. + */ + skip_wfi = true; + } else + BUG(); + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + arch_spin_unlock(&dcscb_lock); + + /* + * Flush all cache levels for this cluster. + * + * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need + * a preliminary flush here for those CPUs. At least, that's + * the theory -- without the extra flush, Linux explodes on + * RTSM (maybe not needed anymore, to be investigated). + */ + flush_cache_all(); + set_cr(get_cr() & ~CR_C); + flush_cache_all(); + + /* + * This is a harmless no-op. On platforms with a real + * outer cache this might either be needed or not, + * depending on where the outer cache sits. + */ + outer_flush_all(); + + /* Disable local coherency by clearing the ACTLR "SMP" bit: */ + set_auxcr(get_auxcr() & ~(1 << 6)); + + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + disable_cci(cluster); + + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + arch_spin_unlock(&dcscb_lock); + + /* + * Flush the local CPU cache. + * + * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need + * a preliminary flush here for those CPUs. At least, that's + * the theory -- without the extra flush, Linux explodes on + * RTSM (maybe not needed anymore, to be investigated). + */ + flush_cache_louis(); + set_cr(get_cr() & ~CR_C); + flush_cache_louis(); + + /* Disable local coherency by clearing the ACTLR "SMP" bit: */ + set_auxcr(get_auxcr() & ~(1 << 6)); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + if (!skip_wfi) { + dsb(); + wfi(); + } + + /* Not dead at this point? Let our caller cope. */ +} + +static const struct mcpm_platform_ops dcscb_power_ops = { + .power_up = dcscb_power_up, + .power_down = dcscb_power_down, +}; + +static void __init dcscb_usage_count_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= 4 || cluster >= 2); + dcscb_use_count[cpu][cluster] = 1; +} + +extern void dcscb_power_up_setup(unsigned int affinity_level); + +static int __init dcscb_init(void) +{ + struct device_node *node; + unsigned int cfg; + int ret; + + ret = psci_probe(); + if (!ret) { + pr_debug("psci found. Aborting native init\n"); + return -ENODEV; + } + + node = of_find_compatible_node(NULL, NULL, "arm,rtsm,dcscb"); + if (!node) + return -ENODEV; + dcscb_base= of_iomap(node, 0); + if (!dcscb_base) + return -EADDRNOTAVAIL; + cfg = readl_relaxed(dcscb_base + DCS_CFG_R); + dcscb_mcpm_cpu_mask[0] = (1 << (((cfg >> 16) >> (0 << 2)) & 0xf)) - 1; + dcscb_mcpm_cpu_mask[1] = (1 << (((cfg >> 16) >> (1 << 2)) & 0xf)) - 1; + dcscb_usage_count_init(); + + ret = mcpm_platform_register(&dcscb_power_ops); + if (!ret) + ret = mcpm_sync_init(dcscb_power_up_setup); + if (ret) { + iounmap(dcscb_base); + return ret; + } + + /* + * Future entries into the kernel can now go + * through the cluster entry vectors. + */ + vexpress_flags_set(virt_to_phys(mcpm_entry_point)); + + return 0; +} + +early_initcall(dcscb_init); diff --git a/arch/arm/mach-vexpress/dcscb_setup.S b/arch/arm/mach-vexpress/dcscb_setup.S new file mode 100644 index 00000000000..93bd13f458a --- /dev/null +++ b/arch/arm/mach-vexpress/dcscb_setup.S @@ -0,0 +1,80 @@ +/* + * arch/arm/include/asm/dcscb_setup.S + * + * Created by: Dave Martin, 2012-06-22 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include <linux/linkage.h> +#include <asm/mcpm.h> + + +#define SLAVE_SNOOPCTL_OFFSET 0 +#define SNOOPCTL_SNOOP_ENABLE (1 << 0) +#define SNOOPCTL_DVM_ENABLE (1 << 1) + +#define CCI_STATUS_OFFSET 0xc +#define STATUS_CHANGE_PENDING (1 << 0) + +#define CCI_SLAVE_OFFSET(n) (0x1000 + 0x1000 * (n)) + +#define RTSM_CCI_PHYS_BASE 0x2c090000 +#define RTSM_CCI_SLAVE_A15 3 +#define RTSM_CCI_SLAVE_A7 4 + +#define RTSM_CCI_A15_OFFSET CCI_SLAVE_OFFSET(RTSM_CCI_SLAVE_A15) +#define RTSM_CCI_A7_OFFSET CCI_SLAVE_OFFSET(RTSM_CCI_SLAVE_A7) + + +ENTRY(dcscb_power_up_setup) + + cmp r0, #0 @ check affinity level + beq 2f + +/* + * Enable cluster-level coherency, in preparation for turning on the MMU. + * The ACTLR SMP bit does not need to be set here, because cpu_resume() + * already restores that. + */ + + mrc p15, 0, r0, c0, c0, 5 @ MPIDR + ubfx r0, r0, #8, #4 @ cluster + + @ A15/A7 may not require explicit L2 invalidation on reset, dependent + @ on hardware integration desicions. + @ For now, this code assumes that L2 is either already invalidated, or + @ invalidation is not required. + + ldr r3, =RTSM_CCI_PHYS_BASE + RTSM_CCI_A15_OFFSET + cmp r0, #0 @ A15 cluster? + addne r3, r3, #RTSM_CCI_A7_OFFSET - RTSM_CCI_A15_OFFSET + + @ r3 now points to the correct CCI slave register block + + ldr r0, [r3, #SLAVE_SNOOPCTL_OFFSET] + orr r0, r0, #SNOOPCTL_SNOOP_ENABLE | SNOOPCTL_DVM_ENABLE + str r0, [r3, #SLAVE_SNOOPCTL_OFFSET] @ enable CCI snoops + + @ Wait for snoop control change to complete: + + ldr r3, =RTSM_CCI_PHYS_BASE + +1: ldr r0, [r3, #CCI_STATUS_OFFSET] + tst r0, #STATUS_CHANGE_PENDING + bne 1b + + dsb @ Synchronise side-effects of enabling CCI + + bx lr + +2: @ Implementation-specific local CPU setup operations should go here, + @ if any. In this case, there is nothing to do. + + bx lr + +ENDPROC(dcscb_power_up_setup) diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index dc1ace55d55..21368ba6ca2 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -12,9 +12,11 @@ #include <linux/errno.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/of_fdt.h> #include <linux/vexpress.h> +#include <asm/mcpm.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -203,3 +205,14 @@ struct smp_operations __initdata vexpress_smp_ops = { .cpu_die = vexpress_cpu_die, #endif }; + +bool __init vexpress_smp_init_ops(void) +{ +#ifdef CONFIG_MCPM + if(of_find_compatible_node(NULL, NULL, "arm,cci")) { + mcpm_smp_set_ops(); + return true; + } +#endif + return false; +} diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 915683cb67d..772b7a179dd 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -8,6 +8,7 @@ #include <linux/smp.h> #include <linux/init.h> #include <linux/irqchip.h> +#include <linux/memblock.h> #include <linux/of_address.h> #include <linux/of_fdt.h> #include <linux/of_irq.h> @@ -377,6 +378,31 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .restart = vexpress_restart, MACHINE_END +static void __init v2m_dt_hdlcd_init(void) +{ + struct device_node *node; + int len, na, ns; + const __be32 *prop; + phys_addr_t fb_base, fb_size; + + node = of_find_compatible_node(NULL, NULL, "arm,hdlcd"); + if (!node) + return; + + na = of_n_addr_cells(node); + ns = of_n_size_cells(node); + + prop = of_get_property(node, "framebuffer", &len); + if (WARN_ON(!prop || len < (na + ns) * sizeof(*prop))) + return; + + fb_base = of_read_number(prop, na); + fb_size = of_read_number(prop + na, ns); + + if (WARN_ON(memblock_remove(fb_base, fb_size))) + return; +}; + static struct map_desc v2m_rs1_io_desc __initdata = { .virtual = V2M_PERIPH, .pfn = __phys_to_pfn(0x1c000000), @@ -427,6 +453,8 @@ void __init v2m_dt_init_early(void) pr_warning("vexpress: DT HBI (%x) is not matching " "hardware (%x)!\n", dt_hbi, hbi); } + + v2m_dt_hdlcd_init(); } static void __init v2m_dt_timer_init(void) @@ -476,6 +504,7 @@ static const char * const v2m_dt_match[] __initconst = { DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .dt_compat = v2m_dt_match, .smp = smp_ops(vexpress_smp_ops), + .smp_init = smp_init_ops(vexpress_smp_init_ops), .map_io = v2m_dt_map_io, .init_early = v2m_dt_init_early, .init_irq = irqchip_init, diff --git a/arch/arm/mach-virt/platsmp.c b/arch/arm/mach-virt/platsmp.c index 8badaabe70a..f4143f5bfa5 100644 --- a/arch/arm/mach-virt/platsmp.c +++ b/arch/arm/mach-virt/platsmp.c @@ -21,8 +21,6 @@ #include <linux/smp.h> #include <linux/of.h> -#include <linux/irqchip/arm-gic.h> - #include <asm/psci.h> #include <asm/smp_plat.h> @@ -45,14 +43,8 @@ static int __cpuinit virt_boot_secondary(unsigned int cpu, return -ENODEV; } -static void __cpuinit virt_secondary_init(unsigned int cpu) -{ - gic_secondary_init(0); -} - struct smp_operations __initdata virt_smp_ops = { .smp_init_cpus = virt_smp_init_cpus, .smp_prepare_cpus = virt_smp_prepare_cpus, - .smp_secondary_init = virt_secondary_init, .smp_boot_secondary = virt_boot_secondary, }; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 5dbf13f954f..e207aa5f846 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -446,8 +446,16 @@ do_translation_fault(unsigned long addr, unsigned int fsr, if (pud_none(*pud_k)) goto bad_area; - if (!pud_present(*pud)) + if (!pud_present(*pud)) { set_pud(pud, *pud_k); + /* + * There is a small window during free_pgtables() where the + * user *pud entry is 0 but the TLB has not been invalidated + * and we get a level 2 (pmd) translation fault caused by the + * intermediate TLB caching of the old level 1 (pud) entry. + */ + flush_tlb_kernel_page(addr); + } pmd = pmd_offset(pud, addr); pmd_k = pmd_offset(pud_k, addr); @@ -470,8 +478,9 @@ do_translation_fault(unsigned long addr, unsigned int fsr, #endif if (pmd_none(pmd_k[index])) goto bad_area; + if (!pmd_present(pmd[index])) + copy_pmd(pmd, pmd_k); - copy_pmd(pmd, pmd_k); return 0; bad_area: diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 78f520bc0e9..2f76880060d 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -110,7 +110,9 @@ ENTRY(cpu_v7_set_pte_ext) ARM( str r3, [r0, #2048]! ) THUMB( add r0, r0, #2048 ) THUMB( str r3, [r0] ) - mcr p15, 0, r0, c7, c10, 1 @ flush_pte + mrc p15, 0, r3, c0, c1, 7 @ read ID_MMFR3 + tst r3, #0xf << 20 @ check the coherent walk bits + mcreq p15, 0, r0, c7, c10, 1 @ clean D-cache to PoU #endif mov pc, lr ENDPROC(cpu_v7_set_pte_ext) diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 6ffd78c0f9a..2098e026632 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -73,7 +73,9 @@ ENTRY(cpu_v7_set_pte_ext) tst r3, #1 << (55 - 32) @ L_PTE_DIRTY orreq r2, #L_PTE_RDONLY 1: strd r2, r3, [r0] - mcr p15, 0, r0, c7, c10, 1 @ flush_pte + mrc p15, 0, r3, c0, c1, 7 @ read ID_MMFR3 + tst r3, #0xf << 20 @ check the coherent walk bits + mcreq p15, 0, r0, c7, c10, 1 @ clean D-cache to PoU #endif mov pc, lr ENDPROC(cpu_v7_set_pte_ext) diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f980cf3d2ba..5d205e74e49 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <mach/map.h> @@ -23,8 +24,6 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> -#include <asm/mach/irq.h> - static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); diff --git a/arch/arm/plat-samsung/s5p-irq-gpioint.c b/arch/arm/plat-samsung/s5p-irq-gpioint.c index bae56131a50..fafdb059043 100644 --- a/arch/arm/plat-samsung/s5p-irq-gpioint.c +++ b/arch/arm/plat-samsung/s5p-irq-gpioint.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/slab.h> @@ -22,8 +23,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> -#include <asm/mach/irq.h> - #define GPIO_BASE(chip) ((void __iomem *)((unsigned long)((chip)->base) & 0xFFFFF000u)) #define CON_OFFSET 0x700 diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index f2ac1556177..1e1b2d76974 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -14,7 +14,6 @@ #include <linux/device.h> #include <linux/jiffies.h> #include <linux/smp.h> -#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -37,13 +36,6 @@ static DEFINE_SPINLOCK(boot_lock); void __cpuinit versatile_secondary_init(unsigned int cpu) { /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* * let the primary processor know we're out of the * pen, then head off into the C entry point */ diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 0f51ed687dc..cd4ac9f001f 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -19,4 +19,9 @@ config OMAP_INTERCONNECT help Driver to enable OMAP interconnect error handling driver. + +config ARM_CCI + bool "ARM CCI driver support" + depends on ARM + endmenu diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 45d997c8545..55aac809e5b 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -6,3 +6,5 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o # Interconnect bus driver for OMAP SoCs. obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o + +obj-$(CONFIG_ARM_CCI) += arm-cci.o diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c new file mode 100644 index 00000000000..b110645bc56 --- /dev/null +++ b/drivers/bus/arm-cci.c @@ -0,0 +1,509 @@ +/* + * ARM Cache Coherency Interconnect (CCI400) support + * + * Copyright (C) 2012-2013 ARM Ltd. + * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/arm-cci.h> + +#include <asm/cacheflush.h> +#include <asm/memory.h> +#include <asm/outercache.h> + +#include <asm/irq_regs.h> +#include <asm/pmu.h> + +#define CCI_STATUS_OFFSET 0xc +#define STATUS_CHANGE_PENDING (1 << 0) + +#define CCI400_PMCR 0x0100 + +#define CCI_SLAVE_OFFSET(n) (0x1000 + 0x1000 * (n)) +#define CCI400_EAG_OFFSET CCI_SLAVE_OFFSET(3) +#define CCI400_KF_OFFSET CCI_SLAVE_OFFSET(4) + +#define DRIVER_NAME "CCI" +struct cci_drvdata { + void __iomem *baseaddr; +}; + +static struct cci_drvdata *info; + +#ifdef CONFIG_HW_PERF_EVENTS + +#define CCI400_PMU_CYCLE_CNTR_BASE 0x9000 +#define CCI400_PMU_CNTR_BASE(idx) (CCI400_PMU_CYCLE_CNTR_BASE + (idx) * 0x1000) + +#define CCI400_PMCR_CEN 0x00000001 +#define CCI400_PMCR_RST 0x00000002 +#define CCI400_PMCR_CCR 0x00000004 +#define CCI400_PMCR_CCD 0x00000008 +#define CCI400_PMCR_EX 0x00000010 +#define CCI400_PMCR_DP 0x00000020 +#define CCI400_PMCR_NCNT_MASK 0x0000F800 +#define CCI400_PMCR_NCNT_SHIFT 11 + +#define CCI400_PMU_EVT_SEL 0x000 +#define CCI400_PMU_CNTR 0x004 +#define CCI400_PMU_CNTR_CTRL 0x008 +#define CCI400_PMU_OVERFLOW 0x00C + +#define CCI400_PMU_OVERFLOW_FLAG 1 + +enum cci400_perf_events { + CCI400_PMU_CYCLES = 0xFF +}; + +#define CCI400_PMU_EVENT_MASK 0xff +#define CCI400_PMU_EVENT_SOURCE(event) ((event >> 5) & 0x7) +#define CCI400_PMU_EVENT_CODE(event) (event & 0x1f) + +#define CCI400_PMU_EVENT_SOURCE_S0 0 +#define CCI400_PMU_EVENT_SOURCE_S4 4 +#define CCI400_PMU_EVENT_SOURCE_M0 5 +#define CCI400_PMU_EVENT_SOURCE_M2 7 + +#define CCI400_PMU_EVENT_SLAVE_MIN 0x0 +#define CCI400_PMU_EVENT_SLAVE_MAX 0x13 + +#define CCI400_PMU_EVENT_MASTER_MIN 0x14 +#define CCI400_PMU_EVENT_MASTER_MAX 0x1A + +#define CCI400_PMU_MAX_HW_EVENTS 5 /* CCI PMU has 4 counters + 1 cycle counter */ + +#define CCI400_PMU_CYCLE_COUNTER_IDX 0 +#define CCI400_PMU_COUNTER0_IDX 1 +#define CCI400_PMU_COUNTER_LAST(cci_pmu) (CCI400_PMU_CYCLE_COUNTER_IDX + cci_pmu->num_events - 1) + + +static struct perf_event *events[CCI400_PMU_MAX_HW_EVENTS]; +static unsigned long used_mask[BITS_TO_LONGS(CCI400_PMU_MAX_HW_EVENTS)]; +static struct pmu_hw_events cci_hw_events = { + .events = events, + .used_mask = used_mask, +}; + +static int cci_pmu_validate_hw_event(u8 hw_event) +{ + u8 ev_source = CCI400_PMU_EVENT_SOURCE(hw_event); + u8 ev_code = CCI400_PMU_EVENT_CODE(hw_event); + + if (ev_source <= CCI400_PMU_EVENT_SOURCE_S4 && + ev_code <= CCI400_PMU_EVENT_SLAVE_MAX) + return hw_event; + else if (CCI400_PMU_EVENT_SOURCE_M0 <= ev_source && + ev_source <= CCI400_PMU_EVENT_SOURCE_M2 && + CCI400_PMU_EVENT_MASTER_MIN <= ev_code && + ev_code <= CCI400_PMU_EVENT_MASTER_MAX) + return hw_event; + + return -EINVAL; +} + +static inline int cci_pmu_counter_is_valid(struct arm_pmu *cci_pmu, int idx) +{ + return CCI400_PMU_CYCLE_COUNTER_IDX <= idx && + idx <= CCI400_PMU_COUNTER_LAST(cci_pmu); +} + +static inline u32 cci_pmu_read_register(int idx, unsigned int offset) +{ + return readl_relaxed(info->baseaddr + CCI400_PMU_CNTR_BASE(idx) + offset); +} + +static inline void cci_pmu_write_register(u32 value, int idx, unsigned int offset) +{ + return writel_relaxed(value, info->baseaddr + CCI400_PMU_CNTR_BASE(idx) + offset); +} + +static inline void cci_pmu_disable_counter(int idx) +{ + cci_pmu_write_register(0, idx, CCI400_PMU_CNTR_CTRL); +} + +static inline void cci_pmu_enable_counter(int idx) +{ + cci_pmu_write_register(1, idx, CCI400_PMU_CNTR_CTRL); +} + +static inline void cci_pmu_select_event(int idx, unsigned long event) +{ + event &= CCI400_PMU_EVENT_MASK; + cci_pmu_write_register(event, idx, CCI400_PMU_EVT_SEL); +} + +static u32 cci_pmu_get_max_counters(void) +{ + u32 n_cnts = (readl_relaxed(info->baseaddr + CCI400_PMCR) & + CCI400_PMCR_NCNT_MASK) >> CCI400_PMCR_NCNT_SHIFT; + + /* add 1 for cycle counter */ + return n_cnts + 1; +} + +static struct pmu_hw_events *cci_pmu_get_hw_events(void) +{ + return &cci_hw_events; +} + +static int cci_pmu_get_event_idx(struct pmu_hw_events *hw, struct perf_event *event) +{ + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hw_event = &event->hw; + unsigned long cci_event = hw_event->config_base & CCI400_PMU_EVENT_MASK; + int idx; + + if (cci_event == CCI400_PMU_CYCLES) { + if (test_and_set_bit(CCI400_PMU_CYCLE_COUNTER_IDX, hw->used_mask)) + return -EAGAIN; + + return CCI400_PMU_CYCLE_COUNTER_IDX; + } + + for (idx = CCI400_PMU_COUNTER0_IDX; idx <= CCI400_PMU_COUNTER_LAST(cci_pmu); ++idx) { + if (!test_and_set_bit(idx, hw->used_mask)) + return idx; + } + + /* No counters available */ + return -EAGAIN; +} + +static int cci_pmu_map_event(struct perf_event *event) +{ + int mapping; + u8 config = event->attr.config & CCI400_PMU_EVENT_MASK; + + if (event->attr.type < PERF_TYPE_MAX) + return -ENOENT; + + /* 0xff is used to represent CCI Cycles */ + if (config == 0xff) + mapping = config; + else + mapping = cci_pmu_validate_hw_event(config); + + return mapping; +} + +static int cci_pmu_request_irq(struct arm_pmu *cci_pmu, irq_handler_t handler) +{ + int irq, err, i = 0; + struct platform_device *pmu_device = cci_pmu->plat_device; + + if (unlikely(!pmu_device)) + return -ENODEV; + + /* CCI exports 6 interrupts - 1 nERRORIRQ + 5 nEVNTCNTOVERFLOW (PMU) + nERRORIRQ will be handled by secure firmware on TC2. So we + assume that all CCI interrupts listed in the linux device + tree are PMU interrupts. + + The following code should then be able to handle different routing + of the CCI PMU interrupts. + */ + while ((irq = platform_get_irq(pmu_device, i)) > 0) { + err = request_irq(irq, handler, 0, "arm-cci-pmu", cci_pmu); + if (err) { + dev_err(&pmu_device->dev, "unable to request IRQ%d for ARM CCI PMU counters\n", + irq); + return err; + } + i++; + } + + return 0; +} + +static irqreturn_t cci_pmu_handle_irq(int irq_num, void *dev) +{ + struct arm_pmu *cci_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + struct perf_sample_data data; + struct pt_regs *regs; + int idx; + + regs = get_irq_regs(); + + /* Iterate over counters and update the corresponding perf events. + This should work regardless of whether we have per-counter overflow + interrupt or a combined overflow interrupt. */ + for (idx = CCI400_PMU_CYCLE_COUNTER_IDX; idx <= CCI400_PMU_COUNTER_LAST(cci_pmu); idx++) { + struct perf_event *event = events->events[idx]; + struct hw_perf_event *hw_counter; + + if (!event) + continue; + + hw_counter = &event->hw; + + /* Did this counter overflow? */ + if (!(cci_pmu_read_register(idx, CCI400_PMU_OVERFLOW) & CCI400_PMU_OVERFLOW_FLAG)) + continue; + cci_pmu_write_register(CCI400_PMU_OVERFLOW_FLAG, idx, CCI400_PMU_OVERFLOW); + + armpmu_event_update(event); + perf_sample_data_init(&data, 0, hw_counter->last_period); + if (!armpmu_event_set_period(event)) + continue; + + if (perf_event_overflow(event, &data, regs)) + cci_pmu->disable(event); + } + + irq_work_run(); + return IRQ_HANDLED; +} + +static void cci_pmu_free_irq(struct arm_pmu *cci_pmu) +{ + int irq, i = 0; + struct platform_device *pmu_device = cci_pmu->plat_device; + + while ((irq = platform_get_irq(pmu_device, i)) > 0) { + free_irq(irq, cci_pmu); + i++; + } +} + +static void cci_pmu_enable_event(struct perf_event *event) +{ + unsigned long flags; + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + + if (unlikely(!cci_pmu_counter_is_valid(cci_pmu, idx))) { + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + return; + } + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Configure the event to count, unless you are counting cycles */ + if (idx != CCI400_PMU_CYCLE_COUNTER_IDX) + cci_pmu_select_event(idx, hw_counter->config_base); + + cci_pmu_enable_counter(idx); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void cci_pmu_disable_event(struct perf_event *event) +{ + unsigned long flags; + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + + if (unlikely(!cci_pmu_counter_is_valid(cci_pmu, idx))) { + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + return; + } + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + cci_pmu_disable_counter(idx); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void cci_pmu_start(struct arm_pmu *cci_pmu) +{ + u32 val; + unsigned long flags; + struct cci_drvdata *info = platform_get_drvdata(cci_pmu->plat_device); + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Enable all the PMU counters. */ + val = readl(info->baseaddr + CCI400_PMCR) | CCI400_PMCR_CEN; + writel(val, info->baseaddr + CCI400_PMCR); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void cci_pmu_stop(struct arm_pmu *cci_pmu) +{ + u32 val; + unsigned long flags; + struct cci_drvdata *info = platform_get_drvdata(cci_pmu->plat_device); + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Disable all the PMU counters. */ + val = readl(info->baseaddr + CCI400_PMCR) & ~CCI400_PMCR_CEN; + writel(val, info->baseaddr + CCI400_PMCR); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static u32 cci_pmu_read_counter(struct perf_event *event) +{ + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + u32 value; + + if (unlikely(!cci_pmu_counter_is_valid(cci_pmu, idx))) { + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + return 0; + } + value = cci_pmu_read_register(idx, CCI400_PMU_CNTR); + + return value; +} + +static void cci_pmu_write_counter(struct perf_event *event, u32 value) +{ + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + + if (unlikely(!cci_pmu_counter_is_valid(cci_pmu, idx))) + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + else + cci_pmu_write_register(value, idx, CCI400_PMU_CNTR); +} + +static struct arm_pmu cci_pmu = { + .name = DRIVER_NAME, + .max_period = (1LLU << 32) - 1, + .get_hw_events = cci_pmu_get_hw_events, + .get_event_idx = cci_pmu_get_event_idx, + .map_event = cci_pmu_map_event, + .request_irq = cci_pmu_request_irq, + .handle_irq = cci_pmu_handle_irq, + .free_irq = cci_pmu_free_irq, + .enable = cci_pmu_enable_event, + .disable = cci_pmu_disable_event, + .start = cci_pmu_start, + .stop = cci_pmu_stop, + .read_counter = cci_pmu_read_counter, + .write_counter = cci_pmu_write_counter, +}; + +static int cci_pmu_init(struct platform_device *pdev) +{ + cci_pmu.plat_device = pdev; + cci_pmu.num_events = cci_pmu_get_max_counters(); + raw_spin_lock_init(&cci_hw_events.pmu_lock); + cpumask_setall(&cci_pmu.valid_cpus); + + return armpmu_register(&cci_pmu, -1); +} + +#else + +static int cci_pmu_init(struct platform_device *pdev) +{ + return 0; +} + +#endif /* CONFIG_HW_PERF_EVENTS */ + +void notrace disable_cci(int cluster) +{ + u32 slave_reg = cluster ? CCI400_KF_OFFSET : CCI400_EAG_OFFSET; + writel_relaxed(0x0, info->baseaddr + slave_reg); + + while (readl_relaxed(info->baseaddr + CCI_STATUS_OFFSET) + & STATUS_CHANGE_PENDING) + barrier(); +} +EXPORT_SYMBOL_GPL(disable_cci); + +static int cci_driver_probe(struct platform_device *pdev) +{ + struct resource *res; + int ret = 0; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + dev_err(&pdev->dev, "unable to allocate mem\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "No memory resource\n"); + ret = -EINVAL; + goto mem_free; + } + + if (!request_mem_region(res->start, resource_size(res), + dev_name(&pdev->dev))) { + dev_err(&pdev->dev, "address 0x%x in use\n", (u32) res->start); + ret = -EBUSY; + goto mem_free; + } + + info->baseaddr = ioremap(res->start, resource_size(res)); + if (!info->baseaddr) { + ret = -EADDRNOTAVAIL; + goto ioremap_err; + } + + /* + * Multi-cluster systems may need this data when non-coherent, during + * cluster power-up/power-down. Make sure it reaches main memory: + */ + __cpuc_flush_dcache_area(info, sizeof *info); + __cpuc_flush_dcache_area(&info, sizeof info); + outer_clean_range(virt_to_phys(info), virt_to_phys(info + 1)); + outer_clean_range(virt_to_phys(&info), virt_to_phys(&info + 1)); + + platform_set_drvdata(pdev, info); + + if (cci_pmu_init(pdev) < 0) + pr_info("CCI PMU initialisation failed.\n"); + + pr_info("CCI loaded at %p\n", info->baseaddr); + return ret; + +ioremap_err: + release_region(res->start, resource_size(res)); +mem_free: + kfree(info); + + return ret; +} + +static const struct of_device_id arm_cci_matches[] = { + {.compatible = "arm,cci"}, + {}, +}; + +static struct platform_driver cci_platform_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = arm_cci_matches, + }, + .probe = cci_driver_probe, +}; + +static int __init cci_init(void) +{ + return platform_driver_register(&cci_platform_driver); +} + +core_initcall(cci_init); diff --git a/drivers/cpuidle/cpuidle-calxeda.c b/drivers/cpuidle/cpuidle-calxeda.c index e1aab38c5a8..ece83d6e049 100644 --- a/drivers/cpuidle/cpuidle-calxeda.c +++ b/drivers/cpuidle/cpuidle-calxeda.c @@ -37,20 +37,6 @@ extern void *scu_base_addr; static struct cpuidle_device __percpu *calxeda_idle_cpuidle_devices; -static inline unsigned int get_auxcr(void) -{ - unsigned int val; - asm("mrc p15, 0, %0, c1, c0, 1 @ get AUXCR" : "=r" (val) : : "cc"); - return val; -} - -static inline void set_auxcr(unsigned int val) -{ - asm volatile("mcr p15, 0, %0, c1, c0, 1 @ set AUXCR" - : : "r" (val) : "cc"); - isb(); -} - static noinline void calxeda_idle_restore(void) { set_cr(get_cr() | CR_C); diff --git a/drivers/gpio/gpio-msm-v2.c b/drivers/gpio/gpio-msm-v2.c index 55a7e7769af..dd2eddeb1e0 100644 --- a/drivers/gpio/gpio-msm-v2.c +++ b/drivers/gpio/gpio-msm-v2.c @@ -23,13 +23,12 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/irqchip/chained_irq.h> #include <linux/irq.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spinlock.h> -#include <asm/mach/irq.h> - #include <mach/msm_gpiomux.h> #include <mach/msm_iomap.h> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index 7877335c4cc..7176743915d 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/slab.h> @@ -32,7 +33,6 @@ #include <linux/of_device.h> #include <linux/module.h> #include <asm-generic/bug.h> -#include <asm/mach/irq.h> enum mxc_gpio_hwtype { IMX1_GPIO, /* runs on i.mx1 */ diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 159f5c57eb4..a612ea1c53c 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -25,11 +25,10 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> -#include <asm/mach/irq.h> - #define OFF_MODE 1 static LIST_HEAD(omap_gpio_list); diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c index b820869ca93..29763361d13 100644 --- a/drivers/gpio/gpio-pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/ioport.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/bitops.h> #include <linux/workqueue.h> #include <linux/gpio.h> @@ -23,7 +24,6 @@ #include <linux/amba/pl061.h> #include <linux/slab.h> #include <linux/pm.h> -#include <asm/mach/irq.h> #define GPIODIR 0x400 #define GPIOIS 0x404 diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 8325f580c0f..2d3af981641 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_device.h> @@ -26,8 +27,6 @@ #include <linux/syscore_ops.h> #include <linux/slab.h> -#include <asm/mach/irq.h> - #include <mach/irqs.h> /* diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 414ad912232..8e215554888 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -27,11 +27,10 @@ #include <linux/platform_device.h> #include <linux/module.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/pinctrl/consumer.h> #include <linux/pm.h> -#include <asm/mach/irq.h> - #define GPIO_BANK(x) ((x) >> 5) #define GPIO_PORT(x) (((x) >> 3) & 0x3) #define GPIO_BIT(x) ((x) & 0x7) diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c index 04d86a9803f..b357c98ddc2 100644 --- a/drivers/irqchip/exynos-combiner.c +++ b/drivers/irqchip/exynos-combiner.c @@ -12,6 +12,7 @@ #include <linux/export.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/irqchip/chained_irq.h> #include <linux/irqdomain.h> #include <linux/of_address.h> #include <linux/of_irq.h> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index 3be382f18c2..e2931de32e6 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -28,6 +28,7 @@ #include <linux/module.h> #include <linux/list.h> #include <linux/smp.h> +#include <linux/cpu.h> #include <linux/cpu_pm.h> #include <linux/cpumask.h> #include <linux/io.h> @@ -38,12 +39,12 @@ #include <linux/interrupt.h> #include <linux/percpu.h> #include <linux/slab.h> +#include <linux/irqchip/chained_irq.h> #include <linux/irqchip/arm-gic.h> #include <asm/irq.h> #include <asm/exception.h> #include <asm/smp_plat.h> -#include <asm/mach/irq.h> #include "irqchip.h" @@ -324,7 +325,7 @@ static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) cascade_irq = irq_find_mapping(chip_data->domain, gic_irq); if (unlikely(gic_irq < 32 || gic_irq > 1020)) - do_bad_IRQ(cascade_irq, desc); + handle_bad_irq(cascade_irq, desc); else generic_handle_irq(cascade_irq); @@ -706,6 +707,25 @@ static int gic_irq_domain_xlate(struct irq_domain *d, return 0; } +#ifdef CONFIG_SMP +static int __cpuinit gic_secondary_init(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + if (action == CPU_STARTING) + gic_cpu_init(&gic_data[0]); + return NOTIFY_OK; +} + +/* + * Notifier for enabling the GIC CPU interface. Set an arbitrarily high + * priority because the GIC needs to be up before the ARM generic timers. + */ +static struct notifier_block __cpuinitdata gic_cpu_notifier = { + .notifier_call = gic_secondary_init, + .priority = 100, +}; +#endif + const struct irq_domain_ops gic_irq_domain_ops = { .map = gic_irq_domain_map, .xlate = gic_irq_domain_xlate, @@ -796,6 +816,7 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, #ifdef CONFIG_SMP set_smp_cross_call(gic_raise_softirq); + register_cpu_notifier(&gic_cpu_notifier); #endif set_handle_irq(gic_handle_irq); @@ -806,13 +827,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, gic_pm_init(gic); } -void __cpuinit gic_secondary_init(unsigned int gic_nr) -{ - BUG_ON(gic_nr >= MAX_GIC_NR); - - gic_cpu_init(&gic_data[gic_nr]); -} - #ifdef CONFIG_OF static int gic_cnt __initdata = 0; diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c index 3cf97aaebe4..e38cb00ee78 100644 --- a/drivers/irqchip/irq-vic.c +++ b/drivers/irqchip/irq-vic.c @@ -33,7 +33,7 @@ #include <linux/irqchip/arm-vic.h> #include <asm/exception.h> -#include <asm/mach/irq.h> +#include <asm/irq.h> #include "irqchip.h" diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c index 3c1723aa622..84ce6b9daa3 100644 --- a/drivers/mfd/vexpress-config.c +++ b/drivers/mfd/vexpress-config.c @@ -184,13 +184,14 @@ static int vexpress_config_schedule(struct vexpress_config_trans *trans) spin_lock_irqsave(&bridge->transactions_lock, flags); - vexpress_config_dump_trans("Executing", trans); - - if (list_empty(&bridge->transactions)) + if (list_empty(&bridge->transactions)) { + vexpress_config_dump_trans("Executing", trans); status = bridge->info->func_exec(trans->func->func, trans->offset, trans->write, trans->data); - else + } else { + vexpress_config_dump_trans("Queuing", trans); status = VEXPRESS_CONFIG_STATUS_WAIT; + } switch (status) { case VEXPRESS_CONFIG_STATUS_DONE: @@ -212,25 +213,31 @@ void vexpress_config_complete(struct vexpress_config_bridge *bridge, { struct vexpress_config_trans *trans; unsigned long flags; + const char *message = "Completed"; spin_lock_irqsave(&bridge->transactions_lock, flags); trans = list_first_entry(&bridge->transactions, struct vexpress_config_trans, list); - vexpress_config_dump_trans("Completed", trans); - trans->status = status; - list_del(&trans->list); - if (!list_empty(&bridge->transactions)) { - vexpress_config_dump_trans("Pending", trans); + do { + vexpress_config_dump_trans(message, trans); + list_del(&trans->list); + complete(&trans->completion); - bridge->info->func_exec(trans->func->func, trans->offset, - trans->write, trans->data); - } - spin_unlock_irqrestore(&bridge->transactions_lock, flags); + if (list_empty(&bridge->transactions)) + break; + + trans = list_first_entry(&bridge->transactions, + struct vexpress_config_trans, list); + vexpress_config_dump_trans("Executing pending", trans); + trans->status = bridge->info->func_exec(trans->func->func, + trans->offset, trans->write, trans->data); + message = "Finished pending"; + } while (trans->status == VEXPRESS_CONFIG_STATUS_DONE); - complete(&trans->completion); + spin_unlock_irqrestore(&bridge->transactions_lock, flags); } EXPORT_SYMBOL(vexpress_config_complete); diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index bf75e967a1f..96a020b1dcd 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -490,12 +490,12 @@ static int vexpress_sysreg_probe(struct platform_device *pdev) return err; } + vexpress_sysreg_dev = &pdev->dev; + platform_device_register_data(vexpress_sysreg_dev, "leds-gpio", PLATFORM_DEVID_AUTO, &vexpress_sysreg_leds_pdata, sizeof(vexpress_sysreg_leds_pdata)); - vexpress_sysreg_dev = &pdev->dev; - device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id); return 0; diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index e83fdfe0c8c..9e201ca28fb 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -519,4 +519,5 @@ source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" source "drivers/misc/mei/Kconfig" source "drivers/misc/vmw_vmci/Kconfig" +source "drivers/misc/vexpress/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 35a1463c72d..2ff81f2b462 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -52,3 +52,4 @@ obj-$(CONFIG_INTEL_MEI) += mei/ obj-$(CONFIG_MAX8997_MUIC) += max8997-muic.o obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/ obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o +obj-$(CONFIG_ARCH_VEXPRESS) += vexpress/ diff --git a/drivers/misc/vexpress/Kconfig b/drivers/misc/vexpress/Kconfig new file mode 100644 index 00000000000..3e2676ae6ee --- /dev/null +++ b/drivers/misc/vexpress/Kconfig @@ -0,0 +1,3 @@ +config ARM_SPC + bool "ARM SPC driver support" + depends on ARM diff --git a/drivers/misc/vexpress/Makefile b/drivers/misc/vexpress/Makefile new file mode 100644 index 00000000000..95b58166d0a --- /dev/null +++ b/drivers/misc/vexpress/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARM_SPC) += arm-spc.o diff --git a/drivers/misc/vexpress/arm-spc.c b/drivers/misc/vexpress/arm-spc.c new file mode 100644 index 00000000000..913dd087282 --- /dev/null +++ b/drivers/misc/vexpress/arm-spc.c @@ -0,0 +1,718 @@ +/* + * Serial Power Controller (SPC) support + * + * Copyright (C) 2012 ARM Ltd. + * Author(s): Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> + * Achin Gupta <achin.gupta@arm.com> + * Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/slab.h> +#include <linux/semaphore.h> +#include <linux/vexpress.h> + +#include <asm/cacheflush.h> +#include <asm/memory.h> +#include <asm/outercache.h> + +#define SCC_CFGREG6 0x018 +#define SCC_CFGREG19 0x120 +#define SCC_CFGREG20 0x124 +#define A15_CONF 0x400 +#define SNOOP_CTL_A15 0x404 +#define A7_CONF 0x500 +#define SNOOP_CTL_A7 0x504 +#define SYS_INFO 0x700 +#define PERF_LVL_A15 0xB00 +#define PERF_REQ_A15 0xB04 +#define PERF_LVL_A7 0xB08 +#define PERF_REQ_A7 0xB0c +#define COMMS 0xB10 +#define COMMS_REQ 0xB14 +#define PWC_STATUS 0xB18 +#define PWC_FLAG 0xB1c +#define WAKE_INT_MASK 0xB24 +#define WAKE_INT_RAW 0xB28 +#define WAKE_INT_STAT 0xB2c +#define A15_PWRDN_EN 0xB30 +#define A7_PWRDN_EN 0xB34 +#define A15_A7_ISOLATE 0xB38 +#define STANDBYWFI_STAT 0xB3c +#define A15_CACTIVE 0xB40 +#define A15_PWRDNREQ 0xB44 +#define A15_PWRDNACK 0xB48 +#define A7_CACTIVE 0xB4c +#define A7_PWRDNREQ 0xB50 +#define A7_PWRDNACK 0xB54 +#define A15_RESET_HOLD 0xB58 +#define A7_RESET_HOLD 0xB5c +#define A15_RESET_STAT 0xB60 +#define A7_RESET_STAT 0xB64 +#define A15_BX_ADDR0 0xB68 +#define SYS_CFG_WDATA 0xB70 +#define SYS_CFG_RDATA 0xB74 +#define A7_BX_ADDR0 0xB78 +#define SPC_CONTROL 0xC00 +#define SPC_LATENCY 0xC04 +#define A15_PERFVAL_BASE 0xC10 +#define A7_PERFVAL_BASE 0xC30 + +#define A15_STANDBYWFIL2_MSK (1 << 2) +#define A7_STANDBYWFIL2_MSK (1 << 6) +#define GBL_WAKEUP_INT_MSK (0x3 << 10) + +#define SYS_CFG_START (1 << 31) +#define SYS_CFG_SCC (6 << 20) +#define SYS_CFG_STAT (14 << 20) + +#define CLKF_SHIFT 16 +#define CLKF_MASK 0x1FFF +#define CLKR_SHIFT 0 +#define CLKR_MASK 0x3F +#define CLKOD_SHIFT 8 +#define CLKOD_MASK 0xF + +#define A15_PART_NO 0xF +#define A7_PART_NO 0x7 + +#define DRIVER_NAME "SPC" +/* + * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS + * operation, the operation could start just before jiffie is about + * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz + */ +#define TIME_OUT_US 20000 + +#define MAX_OPPS 8 +#define MAX_CLUSTERS 2 + +struct vexpress_spc_drvdata { + void __iomem *baseaddr; + uint32_t a15_clusid; + int irq; + uint32_t cur_rsp_mask; + uint32_t cur_rsp_stat; +#define A15_OPP 0 +#define A7_OPP 1 +#define COMMS_OPP 2 +#define STAT_COMPLETE(type) ((1 << 0) << (type << 2)) +#define STAT_ERR(type) ((1 << 1) << (type << 2)) +#define RESPONSE_MASK(type) (STAT_COMPLETE(type) | STAT_ERR(type)) + struct semaphore lock; + struct completion done; + uint32_t freqs[MAX_CLUSTERS][MAX_OPPS]; + int freqs_cnt[MAX_CLUSTERS]; +}; + +static struct vexpress_spc_drvdata *info; + +/* SCC virtual address */ +u32 vscc; + +u32 vexpress_spc_get_clusterid(int cpu_part_no) +{ + switch (cpu_part_no & 0xf) { + case A15_PART_NO: + return readl_relaxed(info->baseaddr + A15_CONF) & 0xf; + case A7_PART_NO: + return readl_relaxed(info->baseaddr + A7_CONF) & 0xf; + default: + BUG(); + } +} + +EXPORT_SYMBOL_GPL(vexpress_spc_get_clusterid); + +void vexpress_spc_write_bxaddr_reg(int cluster, int cpu, u32 val) +{ + void __iomem *baseaddr; + + if (IS_ERR_OR_NULL(info)) + return; + + if (cluster != info->a15_clusid) + baseaddr = info->baseaddr + A7_BX_ADDR0 + (cpu << 2); + else + baseaddr = info->baseaddr + A15_BX_ADDR0 + (cpu << 2); + + writel_relaxed(val, baseaddr); + dsb(); + while (val != readl_relaxed(baseaddr)); + + return; +} + +EXPORT_SYMBOL_GPL(vexpress_spc_write_bxaddr_reg); + +int vexpress_spc_get_nb_cpus(int cluster) +{ + u32 val; + + if (IS_ERR_OR_NULL(info)) + return -ENXIO; + + val = readl_relaxed(info->baseaddr + SYS_INFO); + val = (cluster != info->a15_clusid) ? (val >> 20) : (val >> 16); + + return (val & 0xf); +} + +EXPORT_SYMBOL_GPL(vexpress_spc_get_nb_cpus); + +int vexpress_spc_standbywfil2_status(int cluster) +{ + u32 standbywfi_stat; + + if (IS_ERR_OR_NULL(info)) + BUG(); + + standbywfi_stat = readl_relaxed(info->baseaddr + STANDBYWFI_STAT); + + if (cluster != info->a15_clusid) + return standbywfi_stat & A7_STANDBYWFIL2_MSK; + else + return standbywfi_stat & A15_STANDBYWFIL2_MSK; +} + +EXPORT_SYMBOL_GPL(vexpress_spc_standbywfil2_status); + +int vexpress_spc_standbywfi_status(int cluster, int cpu) +{ + u32 standbywfi_stat; + + if (IS_ERR_OR_NULL(info)) + BUG(); + + standbywfi_stat = readl_relaxed(info->baseaddr + STANDBYWFI_STAT); + + if (cluster != info->a15_clusid) + return standbywfi_stat & ((1 << cpu) << 3); + else + return standbywfi_stat & (1 << cpu); +} + +EXPORT_SYMBOL_GPL(vexpress_spc_standbywfi_status); + +u32 vexpress_spc_read_rststat_reg(int cluster) +{ + + if (IS_ERR_OR_NULL(info)) + BUG(); + + if (cluster != info->a15_clusid) + return readl_relaxed(info->baseaddr + A7_RESET_STAT); + else + return readl_relaxed(info->baseaddr + A15_RESET_STAT); +} + +EXPORT_SYMBOL_GPL(vexpress_spc_read_rststat_reg); + +u32 vexpress_spc_read_rsthold_reg(int cluster) +{ + + if (IS_ERR_OR_NULL(info)) + BUG(); + + if (cluster != info->a15_clusid) + return readl_relaxed(info->baseaddr + A7_RESET_HOLD); + else + return readl_relaxed(info->baseaddr + A15_RESET_HOLD); +} + +EXPORT_SYMBOL_GPL(vexpress_spc_read_rsthold_reg); + +void vexpress_spc_write_rsthold_reg(int cluster, u32 value) +{ + + if (IS_ERR_OR_NULL(info)) + BUG(); + + if (cluster != info->a15_clusid) + writel_relaxed(value, info->baseaddr + A7_RESET_HOLD); + else + writel_relaxed(value, info->baseaddr + A15_RESET_HOLD); +} + +EXPORT_SYMBOL_GPL(vexpress_spc_write_rsthold_reg); + +int vexpress_spc_get_performance(int cluster, u32 *freq) +{ + u32 perf_cfg_reg = 0; + int perf; + + if (IS_ERR_OR_NULL(info)) + return -ENXIO; + + perf_cfg_reg = cluster != info->a15_clusid ? PERF_LVL_A7 : PERF_LVL_A15; + + if (down_timeout(&info->lock, usecs_to_jiffies(TIME_OUT_US))) + return -ETIME; + + perf = readl(info->baseaddr + perf_cfg_reg); + + *freq = info->freqs[cluster][perf]; + + up(&info->lock); + + return 0; + +} +EXPORT_SYMBOL_GPL(vexpress_spc_get_performance); + +static int vexpress_spc_find_perf_index(int cluster, u32 freq) +{ + int idx; + /* Hash function would be ideal, based on hashtable in v3.8?? */ + for (idx = 0; idx < info->freqs_cnt[cluster]; idx++) + if (info->freqs[cluster][idx] == freq) + break; + return idx; +} + +static int vexpress_spc_waitforcompletion(int req_type) +{ + int ret; + + if (!wait_for_completion_interruptible_timeout(&info->done, + usecs_to_jiffies(TIME_OUT_US))) + ret = -ETIMEDOUT; + else + ret = info->cur_rsp_stat & STAT_COMPLETE(req_type) ? 0 : -EIO; + return ret; +} + +int vexpress_spc_set_performance(int cluster, u32 freq) +{ + u32 perf_cfg_reg, perf_stat_reg; + int ret, perf, req_type; + + if (IS_ERR_OR_NULL(info)) + return -ENXIO; + + if (cluster != info->a15_clusid) { + req_type = A7_OPP; + perf_cfg_reg = PERF_LVL_A7; + perf_stat_reg = PERF_REQ_A7; + } else { + req_type = A15_OPP; + perf_cfg_reg = PERF_LVL_A15; + perf_stat_reg = PERF_REQ_A15; + } + + perf = vexpress_spc_find_perf_index(cluster, freq); + + if (perf >= MAX_OPPS) + return -EINVAL; + + if (down_timeout(&info->lock, usecs_to_jiffies(TIME_OUT_US))) + return -ETIME; + + init_completion(&info->done); + + info->cur_rsp_mask = RESPONSE_MASK(req_type); + + writel(perf, info->baseaddr + perf_cfg_reg); + + ret = vexpress_spc_waitforcompletion(req_type); + + info->cur_rsp_mask = 0; + + up(&info->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(vexpress_spc_set_performance); + +int vexpress_spc_set_global_wakeup_intr(u32 set) +{ + u32 wake_int_mask_reg = 0; + + if (IS_ERR_OR_NULL(info)) + return -ENXIO; + + wake_int_mask_reg = readl(info->baseaddr + WAKE_INT_MASK); + if (set) + wake_int_mask_reg |= GBL_WAKEUP_INT_MSK; + else + wake_int_mask_reg &= ~GBL_WAKEUP_INT_MSK; + + vexpress_spc_set_wake_intr(wake_int_mask_reg); + + return 0; +} +EXPORT_SYMBOL_GPL(vexpress_spc_set_global_wakeup_intr); + +int vexpress_spc_set_cpu_wakeup_irq(u32 cpu, u32 cluster, u32 set) +{ + u32 mask = 0; + u32 wake_int_mask_reg = 0; + + if (IS_ERR_OR_NULL(info)) + return -ENXIO; + + mask = 1 << cpu; + if (info->a15_clusid != cluster) + mask <<= 4; + + wake_int_mask_reg = readl(info->baseaddr + WAKE_INT_MASK); + if (set) + wake_int_mask_reg |= mask; + else + wake_int_mask_reg &= ~mask; + + vexpress_spc_set_wake_intr(wake_int_mask_reg); + + return 0; +} +EXPORT_SYMBOL_GPL(vexpress_spc_set_cpu_wakeup_irq); + +void vexpress_spc_set_wake_intr(u32 mask) +{ + if (!IS_ERR_OR_NULL(info)) { + writel(mask & VEXPRESS_SPC_WAKE_INTR_MASK, + info->baseaddr + WAKE_INT_MASK); + dsb(); + while ((mask & VEXPRESS_SPC_WAKE_INTR_MASK) != + readl(info->baseaddr + WAKE_INT_MASK)); + } + + return; +} +EXPORT_SYMBOL_GPL(vexpress_spc_set_wake_intr); + +u32 vexpress_spc_get_wake_intr(int raw) +{ + u32 wake_intr_reg = raw ? WAKE_INT_RAW : WAKE_INT_STAT; + + if (!IS_ERR_OR_NULL(info)) + return readl(info->baseaddr + wake_intr_reg); + else + return 0; +} +EXPORT_SYMBOL_GPL(vexpress_spc_get_wake_intr); + +void vexpress_spc_powerdown_enable(int cluster, int enable) +{ + u32 pwdrn_reg = 0; + + if (!IS_ERR_OR_NULL(info)) { + pwdrn_reg = cluster != info->a15_clusid ? A7_PWRDN_EN : A15_PWRDN_EN; + writel(!!enable, info->baseaddr + pwdrn_reg); + dsb(); + while (readl(info->baseaddr + pwdrn_reg) != !!enable); + } + return; +} +EXPORT_SYMBOL_GPL(vexpress_spc_powerdown_enable); + +void vexpress_spc_adb400_pd_enable(int cluster, int enable) +{ + u32 pwdrn_reg = 0; + u32 val = enable ? 0xF : 0x0; /* all adb bridges ?? */ + + if (IS_ERR_OR_NULL(info)) + return; + + pwdrn_reg = cluster != info->a15_clusid ? A7_PWRDNREQ : A15_PWRDNREQ; + + writel(val, info->baseaddr + pwdrn_reg); + return; +} +EXPORT_SYMBOL_GPL(vexpress_spc_adb400_pd_enable); + +void vexpress_scc_ctl_snoops(int cluster, int enable) +{ + u32 val; + u32 snoop_reg = 0; + u32 or = 0; + + if (IS_ERR_OR_NULL(info)) + return; + + snoop_reg = cluster != info->a15_clusid ? SNOOP_CTL_A7 : SNOOP_CTL_A15; + or = cluster != info->a15_clusid ? 0x2000 : 0x180; + + val = readl_relaxed(info->baseaddr + snoop_reg); + if (enable) { + or = ~or; + val &= or; + } else { + val |= or; + dsb(); + isb(); + } + + writel_relaxed(val, info->baseaddr + snoop_reg); +} +EXPORT_SYMBOL_GPL(vexpress_scc_ctl_snoops); + +u32 vexpress_scc_read_rststat(int cluster) +{ + if (IS_ERR_OR_NULL(info)) + BUG(); + + if (cluster != info->a15_clusid) + return (readl_relaxed(info->baseaddr + SCC_CFGREG6) >> 16) & 0x7; + else + return (readl_relaxed(info->baseaddr + SCC_CFGREG6) >> 2) & 0x3; +} +EXPORT_SYMBOL_GPL(vexpress_scc_read_rststat); + +void vexpress_spc_wfi_cpureset(int cluster, int cpu, int enable) +{ + u32 rsthold_reg, prst_shift; + u32 val; + + if (IS_ERR_OR_NULL(info)) + return; + + if (cluster != info->a15_clusid) { + rsthold_reg = A7_RESET_HOLD; + prst_shift = 3; + } else { + rsthold_reg = A15_RESET_HOLD; + prst_shift = 2; + } + val = readl_relaxed(info->baseaddr + rsthold_reg); + if (enable) + val |= (1 << cpu); + else + val &= ~(1 << cpu); + writel_relaxed(val, info->baseaddr + rsthold_reg); + return; +} +EXPORT_SYMBOL_GPL(vexpress_spc_wfi_cpureset); + +void vexpress_spc_wfi_cluster_reset(int cluster, int enable) +{ + u32 rsthold_reg, shift; + u32 val; + + if (IS_ERR_OR_NULL(info)) + return; + + if (cluster != info->a15_clusid) { + rsthold_reg = A7_RESET_HOLD; + shift = 6; + } else { + rsthold_reg = A15_RESET_HOLD; + shift = 4; + } + val = readl(info->baseaddr + rsthold_reg); + if (enable) + val |= 1 << shift; + else + val &= ~(1 << shift); + writel(val, info->baseaddr + rsthold_reg); + return; +} +EXPORT_SYMBOL_GPL(vexpress_spc_wfi_cluster_reset); + +int vexpress_spc_wfi_cpustat(int cluster) +{ + u32 rststat_reg; + u32 val; + + if (IS_ERR_OR_NULL(info)) + return 0; + + rststat_reg = STANDBYWFI_STAT; + + val = readl_relaxed(info->baseaddr + rststat_reg); + return cluster != info->a15_clusid ? ((val & 0x38) >> 3) : (val & 0x3); +} +EXPORT_SYMBOL_GPL(vexpress_spc_wfi_cpustat); + +irqreturn_t vexpress_spc_irq_handler(int irq, void *data) +{ + struct vexpress_spc_drvdata *drv_data = data; + uint32_t status = readl_relaxed(drv_data->baseaddr + PWC_STATUS); + + if (info->cur_rsp_mask & status) { + info->cur_rsp_stat = status; + complete(&drv_data->done); + } + + return IRQ_HANDLED; +} + +static int read_sys_cfg(int func, int offset, uint32_t *data) +{ + int ret; + + if (down_timeout(&info->lock, usecs_to_jiffies(TIME_OUT_US))) + return -ETIME; + + init_completion(&info->done); + + info->cur_rsp_mask = RESPONSE_MASK(COMMS_OPP); + + /* Set the control value */ + writel(SYS_CFG_START | func | offset >> 2, info->baseaddr + COMMS); + + ret = vexpress_spc_waitforcompletion(COMMS_OPP); + + if (!ret) + *data = readl(info->baseaddr + SYS_CFG_RDATA); + + info->cur_rsp_mask = 0; + + up(&info->lock); + + return ret; +} + +/* + * Based on the firmware documentation, this is always fixed to 20 + * All the 4 OSC: A15 PLL0/1, A7 PLL0/1 must be programmed same + * values for both control and value registers. + * This function uses A15 PLL 0 registers to compute multiple factor + * F out = F in * (CLKF + 1) / ((CLKOD + 1) * (CLKR + 1)) + */ +static inline int __get_mult_factor(void) +{ + int i_div, o_div, f_div; + uint32_t tmp; + + tmp = readl(info->baseaddr + SCC_CFGREG19); + f_div = (tmp >> CLKF_SHIFT) & CLKF_MASK; + + tmp = readl(info->baseaddr + SCC_CFGREG20); + o_div = (tmp >> CLKOD_SHIFT) & CLKOD_MASK; + i_div = (tmp >> CLKR_SHIFT) & CLKR_MASK; + + return (f_div + 1) / ((o_div + 1) * (i_div + 1)); +} + +static int vexpress_spc_populate_opps(uint32_t cluster) +{ + uint32_t data = 0, off, ret, j; + int mult_fact = __get_mult_factor(); + + off = cluster != info->a15_clusid ? A7_PERFVAL_BASE : A15_PERFVAL_BASE; + for (j = 0; j < MAX_OPPS; j++, off += 4) { + ret = read_sys_cfg(SYS_CFG_SCC, off, &data); + if (!ret) + info->freqs[cluster][j] = (data & 0xFFFFF) * mult_fact; + else + break; + } + + info->freqs_cnt[cluster] = j; + return ret; +} + +unsigned int *vexpress_spc_get_freq_table(uint32_t cluster, int *count) +{ + + *count = info->freqs_cnt[cluster]; + return info->freqs[cluster]; +} +EXPORT_SYMBOL_GPL(vexpress_spc_get_freq_table); + +static int vexpress_spc_init(void) +{ + struct device_node *node = of_find_compatible_node(NULL, NULL, + "arm,spc"); + if (!node) + return -ENODEV; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + pr_err("%s: unable to allocate mem\n", __func__); + return -ENOMEM; + } + + info->baseaddr = of_iomap(node, 0); + if (WARN_ON(!info->baseaddr)) { + kfree(info); + return -EIO; + } + + vscc = (u32) info->baseaddr; + sema_init(&info->lock, 1); + + info->irq = irq_of_parse_and_map(node, 0); + + if (info->irq) { + int ret; + + init_completion(&info->done); + + readl_relaxed(info->baseaddr + PWC_STATUS); + + ret = request_irq(info->irq, vexpress_spc_irq_handler, + IRQF_DISABLED | IRQF_TRIGGER_HIGH | IRQF_ONESHOT, "arm-spc", info); + if (ret) { + pr_err("IRQ %d request failed \n", info->irq); + iounmap(info->baseaddr); + kfree(info); + return -ENODEV; + } + } + + info->a15_clusid = readl_relaxed(info->baseaddr + A15_CONF) & 0xf; + + if (vexpress_spc_populate_opps(0) || vexpress_spc_populate_opps(1)) { + if (info->irq) + free_irq(info->irq, info); + iounmap(info->baseaddr); + kfree(info); + pr_err("failed to build OPP table\n"); + return -ENODEV; + } + + /* + * Multi-cluster systems may need this data when non-coherent, during + * cluster power-up/power-down. Make sure it reaches main memory: + */ + __cpuc_flush_dcache_area(info, sizeof *info); + __cpuc_flush_dcache_area(&info, sizeof info); + outer_clean_range(virt_to_phys(info), virt_to_phys(info + 1)); + outer_clean_range(virt_to_phys(&info), virt_to_phys(&info + 1)); + + pr_info("vexpress_spc loaded at %p\n", info->baseaddr); + return 0; +} + +static int vexpress_spc_load_result = -EAGAIN; +static DEFINE_MUTEX(vexpress_spc_loading); + +bool vexpress_spc_check_loaded(void) +{ + if (vexpress_spc_load_result != -EAGAIN) + return (vexpress_spc_load_result == 0); + + mutex_lock(&vexpress_spc_loading); + if (vexpress_spc_load_result == -EAGAIN) + vexpress_spc_load_result = vexpress_spc_init(); + mutex_unlock(&vexpress_spc_loading); + return (vexpress_spc_load_result == 0); +} +EXPORT_SYMBOL_GPL(vexpress_spc_check_loaded); + +static int __init vexpress_spc_early_init(void) +{ + vexpress_spc_check_loaded(); + return vexpress_spc_load_result; +} + +early_initcall(vexpress_spc_early_init); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Serial Power Controller (SPC) support"); diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 5bab73b91c2..41b1aff5334 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1156,6 +1156,10 @@ static int mmc_blk_err_check(struct mmc_card *card, return MMC_BLK_ECC_ERR; return MMC_BLK_DATA_ERR; } else { + if (brq->data.blocks > 1) { + /* Hack to redo transfer one sector at a time */ + return MMC_BLK_DATA_ERR; + } return MMC_BLK_CMD_ERR; } } @@ -1808,7 +1812,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc) case MMC_BLK_ECC_ERR: if (brq->data.blocks > 1) { /* Redo read one sector at a time */ - pr_warning("%s: retrying using single block read\n", + pr_warning("%s: retrying using single block transfer\n", req->rq_disk->disk_name); disable_multi = 1; break; diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index efb7f10e902..b141a28473b 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -18,6 +18,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/io.h> #include <linux/gpio.h> #include <linux/pinctrl/machine.h> @@ -27,8 +28,6 @@ /* Since we request GPIOs from ourself */ #include <linux/pinctrl/consumer.h> -#include <asm/mach/irq.h> - #include <mach/hardware.h> #include <mach/at91_pio.h> diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 538b9ddaadf..7265e551ddd 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -23,13 +23,12 @@ #include <linux/interrupt.h> #include <linux/irqdomain.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/of_irq.h> #include <linux/io.h> #include <linux/slab.h> #include <linux/err.h> -#include <asm/mach/irq.h> - #include "pinctrl-samsung.h" #include "pinctrl-exynos.h" diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index 36d20293de5..93eba9715e6 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/slab.h> #include <linux/of_device.h> #include <linux/of_address.h> @@ -33,7 +34,6 @@ /* Since we request GPIOs from ourself */ #include <linux/pinctrl/consumer.h> #include <linux/platform_data/pinctrl-nomadik.h> -#include <asm/mach/irq.h> #include "pinctrl-nomadik.h" #include "core.h" diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c index d02498b30c6..ab26b4b669d 100644 --- a/drivers/pinctrl/pinctrl-sirf.c +++ b/drivers/pinctrl/pinctrl-sirf.c @@ -14,6 +14,7 @@ #include <linux/slab.h> #include <linux/err.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> #include <linux/pinctrl/consumer.h> @@ -25,7 +26,6 @@ #include <linux/bitops.h> #include <linux/gpio.h> #include <linux/of_gpio.h> -#include <asm/mach/irq.h> #define DRIVER_NAME "pinmux-sirf" diff --git a/drivers/pinctrl/spear/pinctrl-plgpio.c b/drivers/pinctrl/spear/pinctrl-plgpio.c index 295b349a05c..a4908ecd74f 100644 --- a/drivers/pinctrl/spear/pinctrl-plgpio.c +++ b/drivers/pinctrl/spear/pinctrl-plgpio.c @@ -15,12 +15,12 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip/chained_irq.h> #include <linux/module.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/spinlock.h> -#include <asm/mach/irq.h> #define MAX_GPIO_PER_REG 32 #define PIN_OFFSET(pin) (pin % MAX_GPIO_PER_REG) diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-common.c b/drivers/staging/imx-drm/ipu-v3/ipu-common.c index 366f259e375..6efe4e1b499 100644 --- a/drivers/staging/imx-drm/ipu-v3/ipu-common.c +++ b/drivers/staging/imx-drm/ipu-v3/ipu-common.c @@ -25,8 +25,8 @@ #include <linux/clk.h> #include <linux/list.h> #include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> #include <linux/of_device.h> -#include <asm/mach/irq.h> #include "imx-ipu-v3.h" #include "ipu-prv.h" diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 4c1546f71d5..59a7330fd18 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -55,6 +55,11 @@ config OF_VIDEOMODE config HDMI bool +config VEXPRESS_DVI_CONTROL + bool "Versatile Express DVI control" + depends on FB && VEXPRESS_CONFIG + default y + menuconfig FB tristate "Support for frame buffer devices" ---help--- @@ -350,6 +355,21 @@ config FB_ARMCLCD here and read <file:Documentation/kbuild/modules.txt>. The module will be called amba-clcd. +config FB_ARMHDLCD + tristate "ARM High Definition LCD support" + depends on FB && ARM + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This framebuffer device driver is for the ARM High Definition + Colour LCD controller. + + If you want to compile this as a module (=code which can be + inserted into and removed from the running kernel), say M + here and read <file:Documentation/kbuild/modules.txt>. The module + will be called arm-hdlcd. + config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && ARCH_ACORN diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 9df387334cb..47c3a6bbaa1 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -99,6 +99,7 @@ obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o obj-$(CONFIG_FB_PVR2) += pvr2fb.o obj-$(CONFIG_FB_VOODOO1) += sstfb.o obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +obj-$(CONFIG_FB_ARMHDLCD) += arm-hdlcd.o obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o obj-$(CONFIG_FB_68328) += 68328fb.o obj-$(CONFIG_FB_GBE) += gbefb.o @@ -175,3 +176,6 @@ obj-$(CONFIG_DISPLAY_TIMING) += display_timing.o obj-$(CONFIG_OF_DISPLAY_TIMING) += of_display_timing.o obj-$(CONFIG_VIDEOMODE) += videomode.o obj-$(CONFIG_OF_VIDEOMODE) += of_videomode.o + +# platform specific output drivers +obj-$(CONFIG_VEXPRESS_DVI_CONTROL) += vexpress-dvi.o diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 0a2cce7285b..94a1998338d 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -16,7 +16,10 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/memblock.h> #include <linux/mm.h> +#include <linux/of.h> #include <linux/fb.h> #include <linux/init.h> #include <linux/ioport.h> @@ -30,6 +33,16 @@ #define to_clcd(info) container_of(info, struct clcd_fb, fb) +#ifdef CONFIG_ARM +#define clcdfb_dma_alloc dma_alloc_writecombine +#define clcdfb_dma_free dma_free_writecombine +#define clcdfb_dma_mmap dma_mmap_writecombine +#else +#define clcdfb_dma_alloc dma_alloc_coherent +#define clcdfb_dma_free dma_free_coherent +#define clcdfb_dma_mmap dma_mmap_coherent +#endif + /* This is limited to 16 characters when displayed by X startup */ static const char *clcd_name = "CLCD FB"; @@ -392,6 +405,44 @@ static int clcdfb_blank(int blank_mode, struct fb_info *info) return 0; } +int clcdfb_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return clcdfb_dma_mmap(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +int clcdfb_mmap_io(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + unsigned long user_count, count, pfn, off; + + user_count = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; + count = PAGE_ALIGN(fb->fb.fix.smem_len) >> PAGE_SHIFT; + pfn = fb->fb.fix.smem_start >> PAGE_SHIFT; + off = vma->vm_pgoff; + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + if (off < count && user_count <= (count - off)) + return remap_pfn_range(vma, vma->vm_start, pfn + off, + user_count << PAGE_SHIFT, + vma->vm_page_prot); + + return -ENXIO; +} + +void clcdfb_remove_dma(struct clcd_fb *fb) +{ + clcdfb_dma_free(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +void clcdfb_remove_io(struct clcd_fb *fb) +{ + iounmap(fb->fb.screen_base); +} + static int clcdfb_mmap(struct fb_info *info, struct vm_area_struct *vma) { @@ -542,14 +593,239 @@ static int clcdfb_register(struct clcd_fb *fb) return ret; } +struct string_lookup { + const char *string; + const u32 val; +}; + +static struct string_lookup vmode_lookups[] = { + { "FB_VMODE_NONINTERLACED", FB_VMODE_NONINTERLACED}, + { "FB_VMODE_INTERLACED", FB_VMODE_INTERLACED}, + { "FB_VMODE_DOUBLE", FB_VMODE_DOUBLE}, + { "FB_VMODE_ODD_FLD_FIRST", FB_VMODE_ODD_FLD_FIRST}, + { NULL, 0 }, +}; + +static struct string_lookup tim2_lookups[] = { + { "TIM2_CLKSEL", TIM2_CLKSEL}, + { "TIM2_IVS", TIM2_IVS}, + { "TIM2_IHS", TIM2_IHS}, + { "TIM2_IPC", TIM2_IPC}, + { "TIM2_IOE", TIM2_IOE}, + { "TIM2_BCD", TIM2_BCD}, + { NULL, 0}, +}; +static struct string_lookup cntl_lookups[] = { + {"CNTL_LCDEN", CNTL_LCDEN}, + {"CNTL_LCDBPP1", CNTL_LCDBPP1}, + {"CNTL_LCDBPP2", CNTL_LCDBPP2}, + {"CNTL_LCDBPP4", CNTL_LCDBPP4}, + {"CNTL_LCDBPP8", CNTL_LCDBPP8}, + {"CNTL_LCDBPP16", CNTL_LCDBPP16}, + {"CNTL_LCDBPP16_565", CNTL_LCDBPP16_565}, + {"CNTL_LCDBPP16_444", CNTL_LCDBPP16_444}, + {"CNTL_LCDBPP24", CNTL_LCDBPP24}, + {"CNTL_LCDBW", CNTL_LCDBW}, + {"CNTL_LCDTFT", CNTL_LCDTFT}, + {"CNTL_LCDMONO8", CNTL_LCDMONO8}, + {"CNTL_LCDDUAL", CNTL_LCDDUAL}, + {"CNTL_BGR", CNTL_BGR}, + {"CNTL_BEBO", CNTL_BEBO}, + {"CNTL_BEPO", CNTL_BEPO}, + {"CNTL_LCDPWR", CNTL_LCDPWR}, + {"CNTL_LCDVCOMP(1)", CNTL_LCDVCOMP(1)}, + {"CNTL_LCDVCOMP(2)", CNTL_LCDVCOMP(2)}, + {"CNTL_LCDVCOMP(3)", CNTL_LCDVCOMP(3)}, + {"CNTL_LCDVCOMP(4)", CNTL_LCDVCOMP(4)}, + {"CNTL_LCDVCOMP(5)", CNTL_LCDVCOMP(5)}, + {"CNTL_LCDVCOMP(6)", CNTL_LCDVCOMP(6)}, + {"CNTL_LCDVCOMP(7)", CNTL_LCDVCOMP(7)}, + {"CNTL_LDMAFIFOTIME", CNTL_LDMAFIFOTIME}, + {"CNTL_WATERMARK", CNTL_WATERMARK}, + { NULL, 0}, +}; +static struct string_lookup caps_lookups[] = { + {"CLCD_CAP_RGB444", CLCD_CAP_RGB444}, + {"CLCD_CAP_RGB5551", CLCD_CAP_RGB5551}, + {"CLCD_CAP_RGB565", CLCD_CAP_RGB565}, + {"CLCD_CAP_RGB888", CLCD_CAP_RGB888}, + {"CLCD_CAP_BGR444", CLCD_CAP_BGR444}, + {"CLCD_CAP_BGR5551", CLCD_CAP_BGR5551}, + {"CLCD_CAP_BGR565", CLCD_CAP_BGR565}, + {"CLCD_CAP_BGR888", CLCD_CAP_BGR888}, + {"CLCD_CAP_444", CLCD_CAP_444}, + {"CLCD_CAP_5551", CLCD_CAP_5551}, + {"CLCD_CAP_565", CLCD_CAP_565}, + {"CLCD_CAP_888", CLCD_CAP_888}, + {"CLCD_CAP_RGB", CLCD_CAP_RGB}, + {"CLCD_CAP_BGR", CLCD_CAP_BGR}, + {"CLCD_CAP_ALL", CLCD_CAP_ALL}, + { NULL, 0}, +}; + +u32 parse_setting(struct string_lookup *lookup, const char *name) +{ + int i = 0; + while (lookup[i].string != NULL) { + if (strcmp(lookup[i].string, name) == 0) + return lookup[i].val; + ++i; + } + return -EINVAL; +} + +u32 get_string_lookup(struct device_node *node, const char *name, + struct string_lookup *lookup) +{ + const char *string; + int count, i, ret = 0; + + count = of_property_count_strings(node, name); + if (count >= 0) + for (i = 0; i < count; i++) + if (of_property_read_string_index(node, name, i, + &string) == 0) + ret |= parse_setting(lookup, string); + return ret; +} + +int get_val(struct device_node *node, const char *string) +{ + u32 ret = 0; + + if (of_property_read_u32(node, string, &ret)) + ret = -1; + return ret; +} + +struct clcd_panel *getPanel(struct device_node *node) +{ + static struct clcd_panel panel; + + panel.mode.refresh = get_val(node, "refresh"); + panel.mode.xres = get_val(node, "xres"); + panel.mode.yres = get_val(node, "yres"); + panel.mode.pixclock = get_val(node, "pixclock"); + panel.mode.left_margin = get_val(node, "left_margin"); + panel.mode.right_margin = get_val(node, "right_margin"); + panel.mode.upper_margin = get_val(node, "upper_margin"); + panel.mode.lower_margin = get_val(node, "lower_margin"); + panel.mode.hsync_len = get_val(node, "hsync_len"); + panel.mode.vsync_len = get_val(node, "vsync_len"); + panel.mode.sync = get_val(node, "sync"); + panel.bpp = get_val(node, "bpp"); + panel.width = (signed short) get_val(node, "width"); + panel.height = (signed short) get_val(node, "height"); + + panel.mode.vmode = get_string_lookup(node, "vmode", vmode_lookups); + panel.tim2 = get_string_lookup(node, "tim2", tim2_lookups); + panel.cntl = get_string_lookup(node, "cntl", cntl_lookups); + panel.caps = get_string_lookup(node, "caps", caps_lookups); + + return &panel; +} + +struct clcd_panel *clcdfb_get_panel(const char *name) +{ + struct device_node *node = NULL; + const char *mode; + struct clcd_panel *panel = NULL; + + do { + node = of_find_compatible_node(node, NULL, "panel"); + if (node) + if (of_property_read_string(node, "mode", &mode) == 0) + if (strcmp(mode, name) == 0) { + panel = getPanel(node); + panel->mode.name = name; + } + } while (node != NULL); + + return panel; +} + +#ifdef CONFIG_OF +static int clcdfb_dt_init(struct clcd_fb *fb) +{ + int err = 0; + struct device_node *node; + const char *mode; + dma_addr_t dma; + u32 use_dma; + const __be32 *prop; + int len, na, ns; + phys_addr_t fb_base, fb_size; + + node = fb->dev->dev.of_node; + if (!node) + return -ENODEV; + + na = of_n_addr_cells(node); + ns = of_n_size_cells(node); + + if (WARN_ON(of_property_read_string(node, "mode", &mode))) + return -ENODEV; + + fb->panel = clcdfb_get_panel(mode); + if (!fb->panel) + return -EINVAL; + fb->fb.fix.smem_len = fb->panel->mode.xres * fb->panel->mode.yres * 2; + + fb->board->name = "Device Tree CLCD PL111"; + fb->board->caps = CLCD_CAP_5551 | CLCD_CAP_565; + fb->board->check = clcdfb_check; + fb->board->decode = clcdfb_decode; + + if (of_property_read_u32(node, "use_dma", &use_dma)) + use_dma = 0; + + if (use_dma) { + fb->fb.screen_base = clcdfb_dma_alloc(&fb->dev->dev, + fb->fb.fix.smem_len, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + pr_err("CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->board->mmap = clcdfb_mmap_dma; + fb->board->remove = clcdfb_remove_dma; + } else { + prop = of_get_property(node, "framebuffer", &len); + if (WARN_ON(!prop || len < (na + ns) * sizeof(*prop))) + return -EINVAL; + + fb_base = of_read_number(prop, na); + fb_size = of_read_number(prop + na, ns); + + fb->fb.fix.smem_start = fb_base; + fb->fb.screen_base = ioremap_wc(fb_base, fb_size); + fb->board->mmap = clcdfb_mmap_io; + fb->board->remove = clcdfb_remove_io; + } + + return err; +} +#endif /* CONFIG_OF */ + static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id) { struct clcd_board *board = dev->dev.platform_data; struct clcd_fb *fb; int ret; - if (!board) - return -EINVAL; + if (!board) { +#ifdef CONFIG_OF + if (dev->dev.of_node) { + board = kzalloc(sizeof(struct clcd_board), GFP_KERNEL); + if (!board) + return -ENOMEM; + board->setup = clcdfb_dt_init; + } else +#endif + return -EINVAL; + } ret = amba_request_regions(dev, NULL); if (ret) { diff --git a/drivers/video/arm-hdlcd.c b/drivers/video/arm-hdlcd.c new file mode 100644 index 00000000000..f9c4e7490c0 --- /dev/null +++ b/drivers/video/arm-hdlcd.c @@ -0,0 +1,839 @@ +/* + * drivers/video/arm-hdlcd.c + * + * Copyright (C) 2011 ARM Limited + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * ARM HDLCD Controller + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/fb.h> +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/memblock.h> +#include <linux/arm-hdlcd.h> +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#endif + +#include "edid.h" + +#ifdef CONFIG_SERIAL_AMBA_PCU_UART +int get_edid(u8 *msgbuf); +#else +#endif + +#define to_hdlcd_device(info) container_of(info, struct hdlcd_device, fb) + +static struct of_device_id hdlcd_of_matches[] = { + { .compatible = "arm,hdlcd" }, + {}, +}; + +/* Framebuffer size. */ +static unsigned long framebuffer_size; + +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS +static unsigned long buffer_underrun_events; +static DEFINE_SPINLOCK(hdlcd_underrun_lock); + +static void hdlcd_underrun_set(unsigned long val) +{ + spin_lock(&hdlcd_underrun_lock); + buffer_underrun_events = val; + spin_unlock(&hdlcd_underrun_lock); +} + +static unsigned long hdlcd_underrun_get(void) +{ + unsigned long val; + spin_lock(&hdlcd_underrun_lock); + val = buffer_underrun_events; + spin_unlock(&hdlcd_underrun_lock); + return val; +} + +#ifdef CONFIG_PROC_FS +static int hdlcd_underrun_show(struct seq_file *m, void *v) +{ + unsigned char underrun_string[32]; + snprintf(underrun_string, 32, "%lu\n", hdlcd_underrun_get()); + seq_puts(m, underrun_string); + return 0; +} + +static int proc_hdlcd_underrun_open(struct inode *inode, struct file *file) +{ + return single_open(file, hdlcd_underrun_show, NULL); +} + +static const struct file_operations proc_hdlcd_underrun_operations = { + .open = proc_hdlcd_underrun_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int hdlcd_underrun_init(void) +{ + hdlcd_underrun_set(0); + proc_create("hdlcd_underrun", 0, NULL, &proc_hdlcd_underrun_operations); + return 0; +} +static void hdlcd_underrun_close(void) +{ + remove_proc_entry("hdlcd_underrun", NULL); +} +#else +static int hdlcd_underrun_init(void) { return 0; } +static void hdlcd_underrun_close(void) { } +#endif +#endif + +static char *fb_mode = "1680x1050-32@60\0\0\0\0\0"; + +static struct fb_var_screeninfo cached_var_screeninfo; + +static struct fb_videomode hdlcd_default_mode = { + .refresh = 60, + .xres = 1680, + .yres = 1050, + .pixclock = 8403, + .left_margin = 80, + .right_margin = 48, + .upper_margin = 21, + .lower_margin = 3, + .hsync_len = 32, + .vsync_len = 6, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED +}; + +static inline void hdlcd_enable(struct hdlcd_device *hdlcd) +{ + dev_dbg(hdlcd->dev, "HDLCD: output enabled\n"); + writel(1, hdlcd->base + HDLCD_REG_COMMAND); +} + +static inline void hdlcd_disable(struct hdlcd_device *hdlcd) +{ + dev_dbg(hdlcd->dev, "HDLCD: output disabled\n"); + writel(0, hdlcd->base + HDLCD_REG_COMMAND); +} + +static int hdlcd_set_bitfields(struct hdlcd_device *hdlcd, + struct fb_var_screeninfo *var) +{ + int ret = 0; + + memset(&var->transp, 0, sizeof(var->transp)); + var->red.msb_right = 0; + var->green.msb_right = 0; + var->blue.msb_right = 0; + var->blue.offset = 0; + + switch (var->bits_per_pixel) { + case 8: + /* pseudocolor */ + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + break; + case 16: + /* 565 format */ + var->red.length = 5; + var->green.length = 6; + var->blue.length = 5; + break; + case 32: + var->transp.length = 8; + case 24: + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + break; + default: + ret = -EINVAL; + break; + } + + if (!ret) { + if(var->bits_per_pixel != 32) + { + var->green.offset = var->blue.length; + var->red.offset = var->green.offset + var->green.length; + } + else + { + /* Previously, the byte ordering for 32-bit color was + * (msb)<alpha><red><green><blue>(lsb) + * but this does not match what android expects and + * the colors are odd. Instead, use + * <alpha><blue><green><red> + * Since we tell fb what we are doing, console + * , X and directfb access should work fine. + */ + var->green.offset = var->red.length; + var->blue.offset = var->green.offset + var->green.length; + var->transp.offset = var->blue.offset + var->blue.length; + } + } + + return ret; +} + +static int hdlcd_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + int bytes_per_pixel = var->bits_per_pixel / 8; + +#ifdef HDLCD_NO_VIRTUAL_SCREEN + var->yres_virtual = var->yres; +#else + var->yres_virtual = 2 * var->yres; +#endif + + if ((var->xres_virtual * bytes_per_pixel * var->yres_virtual) > hdlcd->fb.fix.smem_len) + return -ENOMEM; + + if (var->xres > HDLCD_MAX_XRES || var->yres > HDLCD_MAX_YRES) + return -EINVAL; + + /* make sure the bitfields are set appropriately */ + return hdlcd_set_bitfields(hdlcd, var); +} + +/* prototype */ +static int hdlcd_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info); + +#define WRITE_HDLCD_REG(reg, value) writel((value), hdlcd->base + (reg)) +#define READ_HDLCD_REG(reg) readl(hdlcd->base + (reg)) + +static int hdlcd_set_par(struct fb_info *info) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + int bytes_per_pixel = hdlcd->fb.var.bits_per_pixel / 8; + int polarities; + int old_yoffset; + + /* check for shortcuts */ + old_yoffset = cached_var_screeninfo.yoffset; + cached_var_screeninfo.yoffset = info->var.yoffset; + if (!memcmp(&info->var, &cached_var_screeninfo, + sizeof(struct fb_var_screeninfo))) { + if(old_yoffset != info->var.yoffset) { + /* we only changed yoffset, and we already + * already recorded it a couple lines up + */ + hdlcd_pan_display(&info->var, info); + } + /* or no change */ + return 0; + } + + hdlcd->fb.fix.line_length = hdlcd->fb.var.xres * bytes_per_pixel; + + if (hdlcd->fb.var.bits_per_pixel >= 16) + hdlcd->fb.fix.visual = FB_VISUAL_TRUECOLOR; + else + hdlcd->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; + + memcpy(&cached_var_screeninfo, &info->var, sizeof(struct fb_var_screeninfo)); + + polarities = HDLCD_POLARITY_DATAEN | +#ifndef CONFIG_ARCH_TUSCAN + HDLCD_POLARITY_PIXELCLK | +#endif + HDLCD_POLARITY_DATA; + polarities |= (hdlcd->fb.var.sync & FB_SYNC_HOR_HIGH_ACT) ? HDLCD_POLARITY_HSYNC : 0; + polarities |= (hdlcd->fb.var.sync & FB_SYNC_VERT_HIGH_ACT) ? HDLCD_POLARITY_VSYNC : 0; + + hdlcd_disable(hdlcd); + + WRITE_HDLCD_REG(HDLCD_REG_FB_LINE_LENGTH, hdlcd->fb.var.xres * bytes_per_pixel); + WRITE_HDLCD_REG(HDLCD_REG_FB_LINE_PITCH, hdlcd->fb.var.xres * bytes_per_pixel); + WRITE_HDLCD_REG(HDLCD_REG_FB_LINE_COUNT, hdlcd->fb.var.yres - 1); + WRITE_HDLCD_REG(HDLCD_REG_V_SYNC, hdlcd->fb.var.vsync_len - 1); + WRITE_HDLCD_REG(HDLCD_REG_V_BACK_PORCH, hdlcd->fb.var.upper_margin - 1); + WRITE_HDLCD_REG(HDLCD_REG_V_DATA, hdlcd->fb.var.yres - 1); + WRITE_HDLCD_REG(HDLCD_REG_V_FRONT_PORCH, hdlcd->fb.var.lower_margin - 1); + WRITE_HDLCD_REG(HDLCD_REG_H_SYNC, hdlcd->fb.var.hsync_len - 1); + WRITE_HDLCD_REG(HDLCD_REG_H_BACK_PORCH, hdlcd->fb.var.left_margin - 1); + WRITE_HDLCD_REG(HDLCD_REG_H_DATA, hdlcd->fb.var.xres - 1); + WRITE_HDLCD_REG(HDLCD_REG_H_FRONT_PORCH, hdlcd->fb.var.right_margin - 1); + WRITE_HDLCD_REG(HDLCD_REG_POLARITIES, polarities); + WRITE_HDLCD_REG(HDLCD_REG_PIXEL_FORMAT, (bytes_per_pixel - 1) << 3); +#ifdef HDLCD_RED_DEFAULT_COLOUR + WRITE_HDLCD_REG(HDLCD_REG_RED_SELECT, (0x00ff0000 | (hdlcd->fb.var.red.length & 0xf) << 8) \ + | hdlcd->fb.var.red.offset); +#else + WRITE_HDLCD_REG(HDLCD_REG_RED_SELECT, ((hdlcd->fb.var.red.length & 0xf) << 8) | hdlcd->fb.var.red.offset); +#endif + WRITE_HDLCD_REG(HDLCD_REG_GREEN_SELECT, ((hdlcd->fb.var.green.length & 0xf) << 8) | hdlcd->fb.var.green.offset); + WRITE_HDLCD_REG(HDLCD_REG_BLUE_SELECT, ((hdlcd->fb.var.blue.length & 0xf) << 8) | hdlcd->fb.var.blue.offset); + + clk_prepare(hdlcd->clk); + clk_set_rate(hdlcd->clk, (1000000000 / hdlcd->fb.var.pixclock) * 1000); + clk_enable(hdlcd->clk); + + hdlcd_enable(hdlcd); + + return 0; +} + +static int hdlcd_setcolreg(unsigned int regno, unsigned int red, unsigned int green, + unsigned int blue, unsigned int transp, struct fb_info *info) +{ + if (regno < 16) { + u32 *pal = info->pseudo_palette; + + pal[regno] = ((red >> 8) << info->var.red.offset) | + ((green >> 8) << info->var.green.offset) | + ((blue >> 8) << info->var.blue.offset); + } + + return 0; +} + +static irqreturn_t hdlcd_irq(int irq, void *data) +{ + struct hdlcd_device *hdlcd = data; + unsigned long irq_mask, irq_status; + + irq_mask = READ_HDLCD_REG(HDLCD_REG_INT_MASK); + irq_status = READ_HDLCD_REG(HDLCD_REG_INT_STATUS); + + /* acknowledge interrupt(s) */ + WRITE_HDLCD_REG(HDLCD_REG_INT_CLEAR, irq_status); +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS + if (irq_status & HDLCD_INTERRUPT_UNDERRUN) { + /* increment the count */ + hdlcd_underrun_set(hdlcd_underrun_get() + 1); + } +#endif + if (irq_status & HDLCD_INTERRUPT_VSYNC) { + /* disable future VSYNC interrupts */ + WRITE_HDLCD_REG(HDLCD_REG_INT_MASK, irq_mask & ~HDLCD_INTERRUPT_VSYNC); + + complete(&hdlcd->vsync_completion); + } + + return IRQ_HANDLED; +} + +static int hdlcd_wait_for_vsync(struct fb_info *info) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + unsigned long irq_mask; + int err; + + /* enable VSYNC interrupt */ + irq_mask = READ_HDLCD_REG(HDLCD_REG_INT_MASK); + WRITE_HDLCD_REG(HDLCD_REG_INT_MASK, irq_mask | HDLCD_INTERRUPT_VSYNC); + + err = wait_for_completion_interruptible_timeout(&hdlcd->vsync_completion, + msecs_to_jiffies(100)); + + if (!err) + return -ETIMEDOUT; + + return 0; +} + +static int hdlcd_blank(int blank_mode, struct fb_info *info) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + + switch (blank_mode) { + case FB_BLANK_POWERDOWN: + clk_disable(hdlcd->clk); + case FB_BLANK_NORMAL: + hdlcd_disable(hdlcd); + break; + case FB_BLANK_UNBLANK: + clk_enable(hdlcd->clk); + hdlcd_enable(hdlcd); + break; + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + default: + return 1; + } + + return 0; +} + +static void hdlcd_mmap_open(struct vm_area_struct *vma) +{ +} + +static void hdlcd_mmap_close(struct vm_area_struct *vma) +{ +} + +static struct vm_operations_struct hdlcd_mmap_ops = { + .open = hdlcd_mmap_open, + .close = hdlcd_mmap_close, +}; + +static int hdlcd_mmap(struct fb_info *info, struct vm_area_struct *vma) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + unsigned long off; + unsigned long start; + unsigned long len = hdlcd->fb.fix.smem_len; + + if (vma->vm_end - vma->vm_start == 0) + return 0; + if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) + return -EINVAL; + + off = vma->vm_pgoff << PAGE_SHIFT; + if ((off >= len) || (vma->vm_end - vma->vm_start + off) > len) + return -EINVAL; + + start = hdlcd->fb.fix.smem_start; + off += start; + + vma->vm_pgoff = off >> PAGE_SHIFT; + vma->vm_flags |= VM_IO; + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); + vma->vm_ops = &hdlcd_mmap_ops; + if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) + return -EAGAIN; + + return 0; +} + +static int hdlcd_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + + hdlcd->fb.var.yoffset = var->yoffset; + WRITE_HDLCD_REG(HDLCD_REG_FB_BASE, hdlcd->fb.fix.smem_start + + (var->yoffset * hdlcd->fb.fix.line_length)); + + hdlcd_wait_for_vsync(info); + + return 0; +} + +static int hdlcd_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) +{ + int err; + + switch (cmd) { + case FBIO_WAITFORVSYNC: + err = hdlcd_wait_for_vsync(info); + break; + default: + err = -ENOIOCTLCMD; + break; + } + + return err; +} + +static struct fb_ops hdlcd_ops = { + .owner = THIS_MODULE, + .fb_check_var = hdlcd_check_var, + .fb_set_par = hdlcd_set_par, + .fb_setcolreg = hdlcd_setcolreg, + .fb_blank = hdlcd_blank, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_mmap = hdlcd_mmap, + .fb_pan_display = hdlcd_pan_display, + .fb_ioctl = hdlcd_ioctl, + .fb_compat_ioctl = hdlcd_ioctl +}; + +static int hdlcd_setup(struct hdlcd_device *hdlcd) +{ + u32 version; + int err = -EFAULT; + + hdlcd->fb.device = hdlcd->dev; + + hdlcd->clk = clk_get(hdlcd->dev, NULL); + if (IS_ERR(hdlcd->clk)) { + dev_err(hdlcd->dev, "HDLCD: unable to find clock data\n"); + return PTR_ERR(hdlcd->clk); + } + + hdlcd->base = ioremap_nocache(hdlcd->fb.fix.mmio_start, hdlcd->fb.fix.mmio_len); + if (!hdlcd->base) { + dev_err(hdlcd->dev, "HDLCD: unable to map registers\n"); + goto remap_err; + } + + hdlcd->fb.pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL); + if (!hdlcd->fb.pseudo_palette) { + dev_err(hdlcd->dev, "HDLCD: unable to allocate pseudo_palette memory\n"); + err = -ENOMEM; + goto kmalloc_err; + } + + version = readl(hdlcd->base + HDLCD_REG_VERSION); + if ((version & HDLCD_PRODUCT_MASK) != HDLCD_PRODUCT_ID) { + dev_err(hdlcd->dev, "HDLCD: unknown product id: 0x%x\n", version); + err = -EINVAL; + goto kmalloc_err; + } + dev_info(hdlcd->dev, "HDLCD: found ARM HDLCD version r%dp%d\n", + (version & HDLCD_VERSION_MAJOR_MASK) >> 8, + version & HDLCD_VERSION_MINOR_MASK); + + strcpy(hdlcd->fb.fix.id, "hdlcd"); + hdlcd->fb.fbops = &hdlcd_ops; + hdlcd->fb.flags = FBINFO_FLAG_DEFAULT/* | FBINFO_VIRTFB*/; + + hdlcd->fb.fix.type = FB_TYPE_PACKED_PIXELS; + hdlcd->fb.fix.type_aux = 0; + hdlcd->fb.fix.xpanstep = 0; + hdlcd->fb.fix.ypanstep = 1; + hdlcd->fb.fix.ywrapstep = 0; + hdlcd->fb.fix.accel = FB_ACCEL_NONE; + + hdlcd->fb.var.nonstd = 0; + hdlcd->fb.var.activate = FB_ACTIVATE_NOW; + hdlcd->fb.var.height = -1; + hdlcd->fb.var.width = -1; + hdlcd->fb.var.accel_flags = 0; + + init_completion(&hdlcd->vsync_completion); + + if (hdlcd->edid) { + /* build modedb from EDID */ + fb_edid_to_monspecs(hdlcd->edid, &hdlcd->fb.monspecs); + fb_videomode_to_modelist(hdlcd->fb.monspecs.modedb, + hdlcd->fb.monspecs.modedb_len, + &hdlcd->fb.modelist); + fb_find_mode(&hdlcd->fb.var, &hdlcd->fb, fb_mode, + hdlcd->fb.monspecs.modedb, + hdlcd->fb.monspecs.modedb_len, + &hdlcd_default_mode, 32); + } else { + hdlcd->fb.monspecs.hfmin = 0; + hdlcd->fb.monspecs.hfmax = 100000; + hdlcd->fb.monspecs.vfmin = 0; + hdlcd->fb.monspecs.vfmax = 400; + hdlcd->fb.monspecs.dclkmin = 1000000; + hdlcd->fb.monspecs.dclkmax = 100000000; + fb_find_mode(&hdlcd->fb.var, &hdlcd->fb, fb_mode, NULL, 0, &hdlcd_default_mode, 32); + } + + dev_info(hdlcd->dev, "using %dx%d-%d@%d mode\n", hdlcd->fb.var.xres, + hdlcd->fb.var.yres, hdlcd->fb.var.bits_per_pixel, + hdlcd->fb.mode ? hdlcd->fb.mode->refresh : 60); + hdlcd->fb.var.xres_virtual = hdlcd->fb.var.xres; +#ifdef HDLCD_NO_VIRTUAL_SCREEN + hdlcd->fb.var.yres_virtual = hdlcd->fb.var.yres; +#else + hdlcd->fb.var.yres_virtual = hdlcd->fb.var.yres * 2; +#endif + + /* initialise and set the palette */ + if (fb_alloc_cmap(&hdlcd->fb.cmap, NR_PALETTE, 0)) { + dev_err(hdlcd->dev, "failed to allocate cmap memory\n"); + err = -ENOMEM; + goto setup_err; + } + fb_set_cmap(&hdlcd->fb.cmap, &hdlcd->fb); + + /* Allow max number of outstanding requests with the largest beat burst */ + WRITE_HDLCD_REG(HDLCD_REG_BUS_OPTIONS, HDLCD_BUS_MAX_OUTSTAND | HDLCD_BUS_BURST_16); + /* Set the framebuffer base to start of allocated memory */ + WRITE_HDLCD_REG(HDLCD_REG_FB_BASE, hdlcd->fb.fix.smem_start); +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS + /* turn on underrun interrupt for counting */ + WRITE_HDLCD_REG(HDLCD_REG_INT_MASK, HDLCD_INTERRUPT_UNDERRUN); +#else + /* Ensure interrupts are disabled */ + WRITE_HDLCD_REG(HDLCD_REG_INT_MASK, 0); +#endif + if (!register_framebuffer(&hdlcd->fb)) { + fb_set_var(&hdlcd->fb, &hdlcd->fb.var); + clk_enable(hdlcd->clk); + return 0; + } + + dev_err(hdlcd->dev, "HDLCD: cannot register framebuffer\n"); + + fb_dealloc_cmap(&hdlcd->fb.cmap); +setup_err: + iounmap(hdlcd->base); +kmalloc_err: + kfree(hdlcd->fb.pseudo_palette); +remap_err: + clk_put(hdlcd->clk); + return err; +} + +static inline unsigned char atohex(u8 data) +{ + if (!isxdigit(data)) + return 0; + /* truncate the upper nibble and add 9 to non-digit values */ + return (data > 0x39) ? ((data & 0xf) + 9) : (data & 0xf); +} + +/* EDID data is passed from devicetree in a literal string that can contain spaces and + the hexadecimal dump of the data */ +static int parse_edid_data(struct hdlcd_device *hdlcd, const u8 *edid_data, int data_len) +{ + int i, j; + + if (!edid_data) + return -EINVAL; + + hdlcd->edid = kzalloc(EDID_LENGTH, GFP_KERNEL); + if (!hdlcd->edid) + return -ENOMEM; + + for (i = 0, j = 0; i < data_len; i++) { + if (isspace(edid_data[i])) + continue; + hdlcd->edid[j++] = atohex(edid_data[i]); + if (j >= EDID_LENGTH) + break; + } + + if (j < EDID_LENGTH) { + kfree(hdlcd->edid); + hdlcd->edid = NULL; + return -EINVAL; + } + + return 0; +} + +static int hdlcd_probe(struct platform_device *pdev) +{ + int err = 0, i; + struct hdlcd_device *hdlcd; + struct resource *mem; +#ifdef CONFIG_OF + struct device_node *of_node; +#endif + + memset(&cached_var_screeninfo, 0, sizeof(struct fb_var_screeninfo)); + + dev_dbg(&pdev->dev, "HDLCD: probing\n"); + + hdlcd = kzalloc(sizeof(*hdlcd), GFP_KERNEL); + if (!hdlcd) + return -ENOMEM; + +#ifdef CONFIG_OF + of_node = pdev->dev.of_node; + if (of_node) { + int len; + const u8 *edid; + const __be32 *prop = of_get_property(of_node, "mode", &len); + if (prop) + strncpy(fb_mode, (char *)prop, len); + prop = of_get_property(of_node, "framebuffer", &len); + if (prop) { + hdlcd->fb.fix.smem_start = of_read_ulong(prop, + of_n_addr_cells(of_node)); + prop += of_n_addr_cells(of_node); + framebuffer_size = of_read_ulong(prop, + of_n_size_cells(of_node)); + if (framebuffer_size > HDLCD_MAX_FRAMEBUFFER_SIZE) + framebuffer_size = HDLCD_MAX_FRAMEBUFFER_SIZE; + dev_dbg(&pdev->dev, "HDLCD: phys_addr = 0x%lx, size = 0x%lx\n", + hdlcd->fb.fix.smem_start, framebuffer_size); + } + edid = of_get_property(of_node, "edid", &len); + if (edid) { + err = parse_edid_data(hdlcd, edid, len); +#ifdef CONFIG_SERIAL_AMBA_PCU_UART + } else { + /* ask the firmware to fetch the EDID */ + dev_dbg(&pdev->dev, "HDLCD: Requesting EDID data\n"); + hdlcd->edid = kzalloc(EDID_LENGTH, GFP_KERNEL); + if (!hdlcd->edid) + return -ENOMEM; + err = get_edid(hdlcd->edid); +#endif /* CONFIG_SERIAL_AMBA_PCU_UART */ + } + if (err) + dev_info(&pdev->dev, "HDLCD: Failed to parse EDID data\n"); + } +#endif /* CONFIG_OF */ + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "HDLCD: cannot get platform resources\n"); + err = -EINVAL; + goto resource_err; + } + + i = platform_get_irq(pdev, 0); + if (i < 0) { + dev_err(&pdev->dev, "HDLCD: no irq defined for vsync\n"); + err = -ENOENT; + goto resource_err; + } else { + err = request_irq(i, hdlcd_irq, 0, dev_name(&pdev->dev), hdlcd); + if (err) { + dev_err(&pdev->dev, "HDLCD: unable to request irq\n"); + goto resource_err; + } + hdlcd->irq = i; + } + + if (!request_mem_region(mem->start, resource_size(mem), dev_name(&pdev->dev))) { + err = -ENXIO; + goto request_err; + } + + if (!hdlcd->fb.fix.smem_start) { + dev_err(&pdev->dev, "platform did not allocate frame buffer memory\n"); + err = -ENOMEM; + goto memalloc_err; + } + hdlcd->fb.screen_base = ioremap_wc(hdlcd->fb.fix.smem_start, framebuffer_size); + if (!hdlcd->fb.screen_base) { + dev_err(&pdev->dev, "unable to ioremap framebuffer\n"); + err = -ENOMEM; + goto probe_err; + } + + hdlcd->fb.screen_size = framebuffer_size; + hdlcd->fb.fix.smem_len = framebuffer_size; + hdlcd->fb.fix.mmio_start = mem->start; + hdlcd->fb.fix.mmio_len = resource_size(mem); + + /* Clear the framebuffer */ + memset(hdlcd->fb.screen_base, 0, framebuffer_size); + + hdlcd->dev = &pdev->dev; + + dev_dbg(&pdev->dev, "HDLCD: framebuffer virt base %p, phys base 0x%lX\n", + hdlcd->fb.screen_base, (unsigned long)hdlcd->fb.fix.smem_start); + + err = hdlcd_setup(hdlcd); + + if (err) + goto probe_err; + + platform_set_drvdata(pdev, hdlcd); + return 0; + +probe_err: + iounmap(hdlcd->fb.screen_base); + memblock_free(hdlcd->fb.fix.smem_start, hdlcd->fb.fix.smem_start); + +memalloc_err: + release_mem_region(mem->start, resource_size(mem)); + +request_err: + free_irq(hdlcd->irq, hdlcd); + +resource_err: + kfree(hdlcd); + + return err; +} + +static int hdlcd_remove(struct platform_device *pdev) +{ + struct hdlcd_device *hdlcd = platform_get_drvdata(pdev); + + clk_disable(hdlcd->clk); + clk_unprepare(hdlcd->clk); + clk_put(hdlcd->clk); + + /* unmap memory */ + iounmap(hdlcd->fb.screen_base); + iounmap(hdlcd->base); + + /* deallocate fb memory */ + fb_dealloc_cmap(&hdlcd->fb.cmap); + kfree(hdlcd->fb.pseudo_palette); + memblock_free(hdlcd->fb.fix.smem_start, hdlcd->fb.fix.smem_start); + release_mem_region(hdlcd->fb.fix.mmio_start, hdlcd->fb.fix.mmio_len); + + free_irq(hdlcd->irq, NULL); + kfree(hdlcd); + + return 0; +} + +#ifdef CONFIG_PM +static int hdlcd_suspend(struct platform_device *pdev, pm_message_t state) +{ + /* not implemented yet */ + return 0; +} + +static int hdlcd_resume(struct platform_device *pdev) +{ + /* not implemented yet */ + return 0; +} +#else +#define hdlcd_suspend NULL +#define hdlcd_resume NULL +#endif + +static struct platform_driver hdlcd_driver = { + .probe = hdlcd_probe, + .remove = hdlcd_remove, + .suspend = hdlcd_suspend, + .resume = hdlcd_resume, + .driver = { + .name = "hdlcd", + .owner = THIS_MODULE, + .of_match_table = hdlcd_of_matches, + }, +}; + +static int __init hdlcd_init(void) +{ +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS + int err = platform_driver_register(&hdlcd_driver); + if (!err) + hdlcd_underrun_init(); + return err; +#else + return platform_driver_register(&hdlcd_driver); +#endif +} + +void __exit hdlcd_exit(void) +{ +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS + hdlcd_underrun_close(); +#endif + platform_driver_unregister(&hdlcd_driver); +} + +module_init(hdlcd_init); +module_exit(hdlcd_exit); + +MODULE_AUTHOR("Liviu Dudau"); +MODULE_DESCRIPTION("ARM HDLCD core driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/vexpress-dvi.c b/drivers/video/vexpress-dvi.c new file mode 100644 index 00000000000..f08753450ee --- /dev/null +++ b/drivers/video/vexpress-dvi.c @@ -0,0 +1,220 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#define pr_fmt(fmt) "vexpress-dvi: " fmt + +#include <linux/fb.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/vexpress.h> + + +static struct vexpress_config_func *vexpress_dvimode_func; + +static struct { + u32 xres, yres, mode; +} vexpress_dvi_dvimodes[] = { + { 640, 480, 0 }, /* VGA */ + { 800, 600, 1 }, /* SVGA */ + { 1024, 768, 2 }, /* XGA */ + { 1280, 1024, 3 }, /* SXGA */ + { 1600, 1200, 4 }, /* UXGA */ + { 1920, 1080, 5 }, /* HD1080 */ +}; + +static void vexpress_dvi_mode_set(struct fb_info *info, u32 xres, u32 yres) +{ + int err = -ENOENT; + int i; + + if (!vexpress_dvimode_func) + return; + + for (i = 0; i < ARRAY_SIZE(vexpress_dvi_dvimodes); i++) { + if (vexpress_dvi_dvimodes[i].xres == xres && + vexpress_dvi_dvimodes[i].yres == yres) { + pr_debug("mode: %ux%u = %d\n", xres, yres, + vexpress_dvi_dvimodes[i].mode); + err = vexpress_config_write(vexpress_dvimode_func, 0, + vexpress_dvi_dvimodes[i].mode); + break; + } + } + + if (err) + pr_warn("Failed to set %ux%u mode! (%d)\n", xres, yres, err); +} + + +static struct vexpress_config_func *vexpress_muxfpga_func; +static int vexpress_dvi_fb = -1; + +static int vexpress_dvi_mux_set(struct fb_info *info) +{ + int err; + u32 site = vexpress_get_site_by_dev(info->device); + + if (!vexpress_muxfpga_func) + return -ENXIO; + + err = vexpress_config_write(vexpress_muxfpga_func, 0, site); + if (!err) { + pr_debug("Selected MUXFPGA input %d (fb%d)\n", site, + info->node); + vexpress_dvi_fb = info->node; + vexpress_dvi_mode_set(info, info->var.xres, + info->var.yres); + } else { + pr_warn("Failed to select MUXFPGA input %d (fb%d)! (%d)\n", + site, info->node, err); + } + + return err; +} + +static int vexpress_dvi_fb_select(int fb) +{ + int err; + struct fb_info *info; + + /* fb0 is the default */ + if (fb < 0) + fb = 0; + + info = registered_fb[fb]; + if (!info || !lock_fb_info(info)) + return -ENODEV; + + err = vexpress_dvi_mux_set(info); + + unlock_fb_info(info); + + return err; +} + +static ssize_t vexpress_dvi_fb_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", vexpress_dvi_fb); +} + +static ssize_t vexpress_dvi_fb_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + long value; + int err = kstrtol(buf, 0, &value); + + if (!err) + err = vexpress_dvi_fb_select(value); + + return err ? err : count; +} + +DEVICE_ATTR(fb, S_IRUGO | S_IWUSR, vexpress_dvi_fb_show, + vexpress_dvi_fb_store); + + +static int vexpress_dvi_fb_event_notify(struct notifier_block *self, + unsigned long action, void *data) +{ + struct fb_event *event = data; + struct fb_info *info = event->info; + struct fb_videomode *mode = event->data; + + switch (action) { + case FB_EVENT_FB_REGISTERED: + if (vexpress_dvi_fb < 0) + vexpress_dvi_mux_set(info); + break; + case FB_EVENT_MODE_CHANGE: + case FB_EVENT_MODE_CHANGE_ALL: + if (info->node == vexpress_dvi_fb) + vexpress_dvi_mode_set(info, mode->xres, mode->yres); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block vexpress_dvi_fb_notifier = { + .notifier_call = vexpress_dvi_fb_event_notify, +}; +static bool vexpress_dvi_fb_notifier_registered; + + +enum vexpress_dvi_func { FUNC_MUXFPGA, FUNC_DVIMODE }; + +static struct of_device_id vexpress_dvi_of_match[] = { + { + .compatible = "arm,vexpress-muxfpga", + .data = (void *)FUNC_MUXFPGA, + }, { + .compatible = "arm,vexpress-dvimode", + .data = (void *)FUNC_DVIMODE, + }, + {} +}; + +static int vexpress_dvi_probe(struct platform_device *pdev) +{ + enum vexpress_dvi_func func; + const struct of_device_id *match = + of_match_device(vexpress_dvi_of_match, &pdev->dev); + + if (match) + func = (enum vexpress_dvi_func)match->data; + else + func = pdev->id_entry->driver_data; + + switch (func) { + case FUNC_MUXFPGA: + vexpress_muxfpga_func = + vexpress_config_func_get_by_dev(&pdev->dev); + device_create_file(&pdev->dev, &dev_attr_fb); + break; + case FUNC_DVIMODE: + vexpress_dvimode_func = + vexpress_config_func_get_by_dev(&pdev->dev); + break; + } + + if (!vexpress_dvi_fb_notifier_registered) { + fb_register_client(&vexpress_dvi_fb_notifier); + vexpress_dvi_fb_notifier_registered = true; + } + + vexpress_dvi_fb_select(vexpress_dvi_fb); + + return 0; +} + +static const struct platform_device_id vexpress_dvi_id_table[] = { + { .name = "vexpress-muxfpga", .driver_data = FUNC_MUXFPGA, }, + { .name = "vexpress-dvimode", .driver_data = FUNC_DVIMODE, }, + {} +}; + +static struct platform_driver vexpress_dvi_driver = { + .probe = vexpress_dvi_probe, + .driver = { + .name = "vexpress-dvi", + .of_match_table = vexpress_dvi_of_match, + }, + .id_table = vexpress_dvi_id_table, +}; + +static int __init vexpress_dvi_init(void) +{ + return platform_driver_register(&vexpress_dvi_driver); +} +device_initcall(vexpress_dvi_init); diff --git a/include/linux/arm-cci.h b/include/linux/arm-cci.h new file mode 100644 index 00000000000..86ae587817a --- /dev/null +++ b/include/linux/arm-cci.h @@ -0,0 +1,30 @@ +/* + * CCI support + * + * Copyright (C) 2012-2013 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_ARM_CCI_H +#define __LINUX_ARM_CCI_H + +#ifdef CONFIG_ARM_CCI +extern void disable_cci(int cluster); +#else +static inline void disable_cci(int cluster) { } +#endif + +#endif diff --git a/include/linux/arm-hdlcd.h b/include/linux/arm-hdlcd.h new file mode 100644 index 00000000000..939f3a81d56 --- /dev/null +++ b/include/linux/arm-hdlcd.h @@ -0,0 +1,122 @@ +/* + * include/linux/arm-hdlcd.h + * + * Copyright (C) 2011 ARM Limited + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * ARM HDLCD Controller register definition + */ + +#include <linux/fb.h> +#include <linux/completion.h> + +/* register offsets */ +#define HDLCD_REG_VERSION 0x0000 /* ro */ +#define HDLCD_REG_INT_RAWSTAT 0x0010 /* rw */ +#define HDLCD_REG_INT_CLEAR 0x0014 /* wo */ +#define HDLCD_REG_INT_MASK 0x0018 /* rw */ +#define HDLCD_REG_INT_STATUS 0x001c /* ro */ +#define HDLCD_REG_USER_OUT 0x0020 /* rw */ +#define HDLCD_REG_FB_BASE 0x0100 /* rw */ +#define HDLCD_REG_FB_LINE_LENGTH 0x0104 /* rw */ +#define HDLCD_REG_FB_LINE_COUNT 0x0108 /* rw */ +#define HDLCD_REG_FB_LINE_PITCH 0x010c /* rw */ +#define HDLCD_REG_BUS_OPTIONS 0x0110 /* rw */ +#define HDLCD_REG_V_SYNC 0x0200 /* rw */ +#define HDLCD_REG_V_BACK_PORCH 0x0204 /* rw */ +#define HDLCD_REG_V_DATA 0x0208 /* rw */ +#define HDLCD_REG_V_FRONT_PORCH 0x020c /* rw */ +#define HDLCD_REG_H_SYNC 0x0210 /* rw */ +#define HDLCD_REG_H_BACK_PORCH 0x0214 /* rw */ +#define HDLCD_REG_H_DATA 0x0218 /* rw */ +#define HDLCD_REG_H_FRONT_PORCH 0x021c /* rw */ +#define HDLCD_REG_POLARITIES 0x0220 /* rw */ +#define HDLCD_REG_COMMAND 0x0230 /* rw */ +#define HDLCD_REG_PIXEL_FORMAT 0x0240 /* rw */ +#define HDLCD_REG_BLUE_SELECT 0x0244 /* rw */ +#define HDLCD_REG_GREEN_SELECT 0x0248 /* rw */ +#define HDLCD_REG_RED_SELECT 0x024c /* rw */ + +/* version */ +#define HDLCD_PRODUCT_ID 0x1CDC0000 +#define HDLCD_PRODUCT_MASK 0xFFFF0000 +#define HDLCD_VERSION_MAJOR_MASK 0x0000FF00 +#define HDLCD_VERSION_MINOR_MASK 0x000000FF + +/* interrupts */ +#define HDLCD_INTERRUPT_DMA_END (1 << 0) +#define HDLCD_INTERRUPT_BUS_ERROR (1 << 1) +#define HDLCD_INTERRUPT_VSYNC (1 << 2) +#define HDLCD_INTERRUPT_UNDERRUN (1 << 3) + +/* polarity */ +#define HDLCD_POLARITY_VSYNC (1 << 0) +#define HDLCD_POLARITY_HSYNC (1 << 1) +#define HDLCD_POLARITY_DATAEN (1 << 2) +#define HDLCD_POLARITY_DATA (1 << 3) +#define HDLCD_POLARITY_PIXELCLK (1 << 4) + +/* commands */ +#define HDLCD_COMMAND_DISABLE (0 << 0) +#define HDLCD_COMMAND_ENABLE (1 << 0) + +/* pixel format */ +#define HDLCD_PIXEL_FMT_LITTLE_ENDIAN (0 << 31) +#define HDLCD_PIXEL_FMT_BIG_ENDIAN (1 << 31) +#define HDLCD_BYTES_PER_PIXEL_MASK (3 << 3) + +/* bus options */ +#define HDLCD_BUS_BURST_MASK 0x01f +#define HDLCD_BUS_MAX_OUTSTAND 0xf00 +#define HDLCD_BUS_BURST_NONE (0 << 0) +#define HDLCD_BUS_BURST_1 (1 << 0) +#define HDLCD_BUS_BURST_2 (1 << 1) +#define HDLCD_BUS_BURST_4 (1 << 2) +#define HDLCD_BUS_BURST_8 (1 << 3) +#define HDLCD_BUS_BURST_16 (1 << 4) + +/* Max resolution supported is 4096x4096, 8 bit per color component, + 8 bit alpha, but we are going to choose the usual hardware default + (2048x2048, 32 bpp) and enable double buffering */ +#define HDLCD_MAX_XRES 2048 +#define HDLCD_MAX_YRES 2048 +#define HDLCD_MAX_FRAMEBUFFER_SIZE (HDLCD_MAX_XRES * HDLCD_MAX_YRES << 2) + +#define HDLCD_MEM_BASE (CONFIG_PAGE_OFFSET - 0x1000000) + +#define NR_PALETTE 256 + +/* OEMs using HDLCD may wish to enable these settings if + * display disruption is apparent and you suspect HDLCD + * access to RAM may be starved. + */ +/* Turn HDLCD default color red instead of black so + * that it's easy to see pixel clock data underruns + * (compared to other visual disruption) + */ +//#define HDLCD_RED_DEFAULT_COLOUR +/* Add a counter in the IRQ handler to count buffer underruns + * and /proc/hdlcd_underrun to read the counter + */ +//#define HDLCD_COUNT_BUFFERUNDERRUNS +/* Restrict height to 1x screen size + * + */ +//#define HDLCD_NO_VIRTUAL_SCREEN + +#ifdef CONFIG_ANDROID +#define HDLCD_NO_VIRTUAL_SCREEN +#endif + +struct hdlcd_device { + struct fb_info fb; + struct device *dev; + struct clk *clk; + void __iomem *base; + int irq; + struct completion vsync_completion; + unsigned char *edid; +}; diff --git a/include/linux/irqchip/arm-gic.h b/include/linux/irqchip/arm-gic.h index 2639f614a00..b5696108c06 100644 --- a/include/linux/irqchip/arm-gic.h +++ b/include/linux/irqchip/arm-gic.h @@ -65,7 +65,6 @@ extern struct irq_chip gic_arch_extn; void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, u32 offset, struct device_node *); -void gic_secondary_init(unsigned int); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_cpu_if_down(void); diff --git a/include/linux/irqchip/chained_irq.h b/include/linux/irqchip/chained_irq.h new file mode 100644 index 00000000000..adf4c30f3af --- /dev/null +++ b/include/linux/irqchip/chained_irq.h @@ -0,0 +1,52 @@ +/* + * Chained IRQ handlers support. + * + * Copyright (C) 2011 ARM Ltd. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __IRQCHIP_CHAINED_IRQ_H +#define __IRQCHIP_CHAINED_IRQ_H + +#include <linux/irq.h> + +/* + * Entry/exit functions for chained handlers where the primary IRQ chip + * may implement either fasteoi or level-trigger flow control. + */ +static inline void chained_irq_enter(struct irq_chip *chip, + struct irq_desc *desc) +{ + /* FastEOI controllers require no action on entry. */ + if (chip->irq_eoi) + return; + + if (chip->irq_mask_ack) { + chip->irq_mask_ack(&desc->irq_data); + } else { + chip->irq_mask(&desc->irq_data); + if (chip->irq_ack) + chip->irq_ack(&desc->irq_data); + } +} + +static inline void chained_irq_exit(struct irq_chip *chip, + struct irq_desc *desc) +{ + if (chip->irq_eoi) + chip->irq_eoi(&desc->irq_data); + else + chip->irq_unmask(&desc->irq_data); +} + +#endif /* __IRQCHIP_CHAINED_IRQ_H */ diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h index 75818744ab5..63e71e28801 100644 --- a/include/linux/vexpress.h +++ b/include/linux/vexpress.h @@ -15,6 +15,7 @@ #define _LINUX_VEXPRESS_H #include <linux/device.h> +#include <linux/err.h> #define VEXPRESS_SITE_MB 0 #define VEXPRESS_SITE_DB1 1 @@ -126,4 +127,116 @@ void vexpress_osc_of_setup(struct device_node *node); void vexpress_clk_init(void __iomem *sp810_base); void vexpress_clk_of_init(void); +/* SPC */ + +#define VEXPRESS_SPC_WAKE_INTR_IRQ(cluster, cpu) \ + (1 << (4 * (cluster) + (cpu))) +#define VEXPRESS_SPC_WAKE_INTR_FIQ(cluster, cpu) \ + (1 << (7 * (cluster) + (cpu))) +#define VEXPRESS_SPC_WAKE_INTR_SWDOG (1 << 10) +#define VEXPRESS_SPC_WAKE_INTR_GTIMER (1 << 11) +#define VEXPRESS_SPC_WAKE_INTR_MASK 0xFFF + +#ifdef CONFIG_ARM_SPC + +extern u32 vexpress_spc_get_clusterid(int cpu_part_no); +extern u32 vexpress_spc_read_rsthold_reg(int cluster); +extern u32 vexpress_spc_read_rststat_reg(int cluster); +extern u32 vexpress_scc_read_rststat(int cluster); +extern u32 vexpress_spc_get_wake_intr(int raw); +extern int vexpress_spc_standbywfi_status(int cluster, int cpu); +extern int vexpress_spc_standbywfil2_status(int cluster); +extern int vexpress_spc_set_cpu_wakeup_irq(u32 cpu, u32 cluster, u32 set); +extern int vexpress_spc_set_global_wakeup_intr(u32 set); +extern unsigned int *vexpress_spc_get_freq_table(uint32_t cluster, int *count); +extern int vexpress_spc_get_performance(int cluster, u32 *freq); +extern int vexpress_spc_set_performance(int cluster, u32 freq); +extern int vexpress_spc_wfi_cpustat(int cluster); +extern void vexpress_spc_set_wake_intr(u32 mask); +extern void vexpress_spc_write_bxaddr_reg(int cluster, int cpu, u32 val); +extern int vexpress_spc_get_nb_cpus(int cluster); +extern void vexpress_spc_write_rsthold_reg(int cluster, u32 value); +extern void vexpress_spc_powerdown_enable(int cluster, int enable); +extern void vexpress_spc_adb400_pd_enable(int cluster, int enable); +extern void vexpress_spc_wfi_cpureset(int cluster, int cpu, int enable); +extern void vexpress_spc_wfi_cluster_reset(int cluster, int enable); +extern void vexpress_scc_ctl_snoops(int cluster, int enable); +extern bool vexpress_spc_check_loaded(void); +#else +static inline int vexpress_spc_set_cpu_wakeup_irq(u32 cpu, u32 cluster, u32 set) +{ + return 0; +} + +static inline int vexpress_spc_set_global_wakeup_intr(u32 set) +{ + return 0; +} + +static inline int vexpress_spc_standbywfi_status(int cluster, int cpu) +{ + return 0; +} + +static inline int vexpress_spc_standbywfil2_status(int cluster) +{ + return 0; +} + +static inline u32 vexpress_spc_get_clusterid(int cpu_part_no) +{ + return 0; +} + +static inline u32 vexpress_spc_read_rsthold_reg(int cluster) +{ + return 0; +} + +static inline u32 vexpress_spc_read_rststat_reg(int cluster) +{ + return 0; +} + +static inline void vexpress_spc_write_bxaddr_reg(int cluster, int cpu, u32 val) +{ +} + +static inline void vexpress_spc_write_rsthold_reg(int cluster, u32 value) +{ +} + +static inline u32 vexpress_scc_read_rststat(int cluster) +{ + return 0; +} + +static inline unsigned int *vexpress_spc_get_freq_table(uint32_t cluster, int *count) +{ + return ERR_PTR(-ENOSYS); +} + +static inline int vexpress_spc_get_performance(int cluster, u32 *freq) +{ + return -ENOSYS; +} +static inline int vexpress_spc_set_performance(int cluster, u32 freq) +{ + return -ENOSYS; +} +static inline void vexpress_spc_set_wake_intr(u32 mask) { } +static inline u32 vexpress_spc_get_wake_intr(int raw) { return 0; } +static inline void vexpress_spc_powerdown_enable(int cluster, int enable) { } +static inline void vexpress_spc_adb400_pd_enable(int cluster, int enable) { } +static inline void vexpress_spc_wfi_cpureset(int cluster, int cpu, int enable) +{ } +static inline int vexpress_spc_wfi_cpustat(int cluster) { return 0; } +static inline void vexpress_spc_wfi_cluster_reset(int cluster, int enable) { } +static inline bool vexpress_spc_check_loaded(void) +{ + return false; +} +static inline void vexpress_scc_ctl_snoops(int cluster, int enable) { } +#endif + #endif diff --git a/linaro/configs/vexpress-tuning.conf b/linaro/configs/vexpress-tuning.conf new file mode 100644 index 00000000000..adea6cc66de --- /dev/null +++ b/linaro/configs/vexpress-tuning.conf @@ -0,0 +1 @@ +# CONFIG_PROVE_LOCKING is not set diff --git a/linaro/configs/vexpress.conf b/linaro/configs/vexpress.conf new file mode 100644 index 00000000000..94ed8d8729b --- /dev/null +++ b/linaro/configs/vexpress.conf @@ -0,0 +1,59 @@ +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VEXPRESS_CA9X4=y +CONFIG_BIG_LITTLE=y +CONFIG_ARCH_VEXPRESS_TC2=y +CONFIG_ARCH_VEXPRESS_DCSCB=y +CONFIG_ARM_VEXPRESS_BL_CPUFREQ=y +CONFIG_ARM_PSCI=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_INTERACTIVE=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_NR_CPUS=8 +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_CMDLINE="console=ttyAMA0,38400n8 root=/dev/mmcblk0p2 rootwait mmci.fmax=4000000" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SMSC911X=y +CONFIG_SMC91X=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FB_ARMHDLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_ARMAACI=y +CONFIG_USB=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_VEXPRESS_CONFIG=y +CONFIG_SENSORS_VEXPRESS=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_VEXPRESS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y |