diff options
84 files changed, 1612 insertions, 753 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d56d21c0573..9d260836339 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -23,6 +23,7 @@ config ARM select PERF_USE_VMALLOC select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7)) + select HAVE_C_RECORDMCOUNT help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -1164,7 +1165,7 @@ config ISA_DMA_API bool config PCI - bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX + bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX || SA1100_NANOENGINE help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside @@ -1175,6 +1176,12 @@ config PCI_DOMAINS bool depends on PCI +config PCI_NANOENGINE + bool "BSE nanoEngine PCI support" + depends on SA1100_NANOENGINE + help + Enable PCI on the BSE nanoEngine board. + config PCI_SYSCALL def_bool PCI @@ -1650,6 +1657,19 @@ config ATAGS_PROC Should the atags used to boot the kernel be exported in an "atags" file in procfs. Useful with kexec. +config CRASH_DUMP + bool "Build kdump crash kernel (EXPERIMENTAL)" + depends on EXPERIMENTAL + help + Generate crash dump after being started by kexec. This should + be normally only set in special crash dump kernels which are + loaded in the main kernel with kexec-tools into a specially + reserved region and then later executed after a crash by + kdump/kexec. The crash dump kernel must be compiled to a + memory address not used by the main kernel + + For more details see Documentation/kdump/kdump.txt + config AUTO_ZRELADDR bool "Auto calculation of the decompressed kernel image address" depends on !ZBOOT_ROM && !ARCH_U300 diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 65a7c1c588a..0a8f748e506 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -45,6 +45,10 @@ else endif endif +ifeq ($(CONFIG_ARCH_SHMOBILE),y) +OBJS += head-shmobile.o +endif + # # We now have a PIC decompressor implementation. Decompressors running # from RAM should not define ZTEXTADDR. Decompressors running directly diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S new file mode 100644 index 00000000000..30973b76e6a --- /dev/null +++ b/arch/arm/boot/compressed/head-shmobile.S @@ -0,0 +1,53 @@ +/* + * The head-file for SH-Mobile ARM platforms + * + * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * Simon Horman <horms@verge.net.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifdef CONFIG_ZBOOT_ROM + + .section ".start", "ax" + + /* load board-specific initialization code */ +#include <mach/zboot.h> + + b 1f +__atags:@ tag #1 + .long 12 @ tag->hdr.size = tag_size(tag_core); + .long 0x54410001 @ tag->hdr.tag = ATAG_CORE; + .long 0 @ tag->u.core.flags = 0; + .long 0 @ tag->u.core.pagesize = 0; + .long 0 @ tag->u.core.rootdev = 0; + @ tag #2 + .long 8 @ tag->hdr.size = tag_size(tag_mem32); + .long 0x54410002 @ tag->hdr.tag = ATAG_MEM; + .long CONFIG_MEMORY_SIZE @ tag->u.mem.size = CONFIG_MEMORY_SIZE; + .long CONFIG_MEMORY_START @ @ tag->u.mem.start = CONFIG_MEMORY_START; + @ tag #3 + .long 0 @ tag->hdr.size = 0 + .long 0 @ tag->hdr.tag = ATAG_NONE; +1: + + /* Set board ID necessary for boot */ + ldr r7, 1f @ Set machine type register + adr r8, __atags @ Set atag register + b 2f + +1 : .long MACH_TYPE +2 : + +#endif /* CONFIG_ZBOOT_ROM */ diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index e6e8664a941..e7521bca2c3 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_ARCH_IXP2000) += uengine.o obj-$(CONFIG_ARCH_IXP23XX) += uengine.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_COMMON_CLKDEV) += clkdev.o +obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index e6388dcd8cf..0b89ef00133 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -35,6 +35,9 @@ static DEFINE_SPINLOCK(irq_controller_lock); +/* Address of GIC 0 CPU interface */ +void __iomem *gic_cpu_base_addr __read_mostly; + struct gic_chip_data { unsigned int irq_offset; void __iomem *dist_base; @@ -45,7 +48,7 @@ struct gic_chip_data { #define MAX_GIC_NR 1 #endif -static struct gic_chip_data gic_data[MAX_GIC_NR]; +static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly; static inline void __iomem *gic_dist_base(unsigned int irq) { @@ -213,21 +216,16 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) set_irq_chained_handler(irq, gic_handle_cascade_irq); } -void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, - unsigned int irq_start) +static void __init gic_dist_init(struct gic_chip_data *gic, + unsigned int irq_start) { unsigned int gic_irqs, irq_limit, i; + void __iomem *base = gic->dist_base; u32 cpumask = 1 << smp_processor_id(); - if (gic_nr >= MAX_GIC_NR) - BUG(); - cpumask |= cpumask << 8; cpumask |= cpumask << 16; - gic_data[gic_nr].dist_base = base; - gic_data[gic_nr].irq_offset = (irq_start - 1) & ~31; - writel(0, base + GIC_DIST_CTRL); /* @@ -267,7 +265,7 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, /* * Limit number of interrupts registered to the platform maximum */ - irq_limit = gic_data[gic_nr].irq_offset + gic_irqs; + irq_limit = gic->irq_offset + gic_irqs; if (WARN_ON(irq_limit > NR_IRQS)) irq_limit = NR_IRQS; @@ -276,7 +274,7 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, */ for (i = irq_start; i < irq_limit; i++) { set_irq_chip(i, &gic_chip); - set_irq_chip_data(i, &gic_data[gic_nr]); + set_irq_chip_data(i, gic); set_irq_handler(i, handle_level_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } @@ -284,19 +282,12 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, writel(1, base + GIC_DIST_CTRL); } -void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base) +static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) { - void __iomem *dist_base; + void __iomem *dist_base = gic->dist_base; + void __iomem *base = gic->cpu_base; int i; - if (gic_nr >= MAX_GIC_NR) - BUG(); - - dist_base = gic_data[gic_nr].dist_base; - BUG_ON(!dist_base); - - gic_data[gic_nr].cpu_base = base; - /* * Deal with the banked PPI and SGI interrupts - disable all * PPI interrupts, ensure all SGI interrupts are enabled. @@ -314,6 +305,42 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base) writel(1, base + GIC_CPU_CTRL); } +void __init gic_init(unsigned int gic_nr, unsigned int irq_start, + void __iomem *dist_base, void __iomem *cpu_base) +{ + struct gic_chip_data *gic; + + BUG_ON(gic_nr >= MAX_GIC_NR); + + gic = &gic_data[gic_nr]; + gic->dist_base = dist_base; + gic->cpu_base = cpu_base; + gic->irq_offset = (irq_start - 1) & ~31; + + if (gic_nr == 0) + gic_cpu_base_addr = cpu_base; + + gic_dist_init(gic, irq_start); + gic_cpu_init(gic); +} + +void __cpuinit gic_secondary_init(unsigned int gic_nr) +{ + BUG_ON(gic_nr >= MAX_GIC_NR); + + gic_cpu_init(&gic_data[gic_nr]); +} + +void __cpuinit gic_enable_ppi(unsigned int irq) +{ + unsigned long flags; + + local_irq_save(flags); + irq_to_desc(irq)->status |= IRQ_NOPROBE; + gic_unmask_irq(irq); + local_irq_restore(flags); +} + #ifdef CONFIG_SMP void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { diff --git a/arch/arm/plat-versatile/timer-sp.c b/arch/arm/common/timer-sp.c index fb0d1c29971..4740313daa5 100644 --- a/arch/arm/plat-versatile/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/plat-versatile/timer-sp.c + * linux/arch/arm/common/timer-sp.c * * Copyright (C) 1999 - 2003 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd @@ -26,8 +26,6 @@ #include <asm/hardware/arm_timer.h> -#include <plat/timer-sp.h> - /* * These timers are currently always setup to be clocked at 1MHz. */ diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 8bb66bca2e3..c3cd8755e64 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -99,6 +99,8 @@ struct elf32_hdr; extern int elf_check_arch(const struct elf32_hdr *); #define elf_check_arch elf_check_arch +#define vmcore_elf64_check_arch(x) (0) + extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int); #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk) diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S new file mode 100644 index 00000000000..c115b82fe80 --- /dev/null +++ b/arch/arm/include/asm/hardware/entry-macro-gic.S @@ -0,0 +1,75 @@ +/* + * arch/arm/include/asm/hardware/entry-macro-gic.S + * + * Low-level IRQ helper macros for GIC + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/hardware/gic.h> + +#ifndef HAVE_GET_IRQNR_PREAMBLE + .macro get_irqnr_preamble, base, tmp + ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + .endm +#endif + +/* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] + /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + .endm + +/* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm + +/* As above, this assumes that irqstat and base are preserved.. */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 7f34333bb54..84557d32100 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -33,10 +33,13 @@ #define GIC_DIST_SOFTINT 0xf00 #ifndef __ASSEMBLY__ -void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start); -void gic_cpu_init(unsigned int gic_nr, void __iomem *base); +extern void __iomem *gic_cpu_base_addr; + +void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *); +void gic_secondary_init(unsigned int); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); +void gic_enable_ppi(unsigned int); #endif #endif diff --git a/arch/arm/plat-versatile/include/plat/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h index 21e75e30d49..21e75e30d49 100644 --- a/arch/arm/plat-versatile/include/plat/timer-sp.h +++ b/arch/arm/include/asm/hardware/timer-sp.h diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 815efa2d4e0..20e0f7c9e03 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -241,18 +241,15 @@ extern void _memset_io(volatile void __iomem *, int, size_t); * */ #ifndef __arch_ioremap -#define ioremap(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) -#define ioremap_nocache(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) -#define ioremap_cached(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_CACHED) -#define ioremap_wc(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_WC) -#define iounmap(cookie) __iounmap(cookie) -#else +#define __arch_ioremap __arm_ioremap +#define __arch_iounmap __iounmap +#endif + #define ioremap(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) #define ioremap_nocache(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) #define ioremap_cached(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_CACHED) #define ioremap_wc(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_WC) -#define iounmap(cookie) __arch_iounmap(cookie) -#endif +#define iounmap __arch_iounmap /* * io{read,write}{8,16,32} macros diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h index 8ec9ef5c3c7..c0094d8edae 100644 --- a/arch/arm/include/asm/kexec.h +++ b/arch/arm/include/asm/kexec.h @@ -33,10 +33,20 @@ static inline void crash_setup_regs(struct pt_regs *newregs, if (oldregs) { memcpy(newregs, oldregs, sizeof(*newregs)); } else { - __asm__ __volatile__ ("stmia %0, {r0 - r15}" - : : "r" (&newregs->ARM_r0)); - __asm__ __volatile__ ("mrs %0, cpsr" - : "=r" (newregs->ARM_cpsr)); + __asm__ __volatile__ ( + "stmia %[regs_base], {r0-r12}\n\t" + "mov %[_ARM_sp], sp\n\t" + "str lr, %[_ARM_lr]\n\t" + "adr %[_ARM_pc], 1f\n\t" + "mrs %[_ARM_cpsr], cpsr\n\t" + "1:" + : [_ARM_pc] "=r" (newregs->ARM_pc), + [_ARM_cpsr] "=r" (newregs->ARM_cpsr), + [_ARM_sp] "=r" (newregs->ARM_sp), + [_ARM_lr] "=o" (newregs->ARM_lr) + : [regs_base] "r" (&newregs->ARM_r0) + : "memory" + ); } } diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index cbb0bc295d2..12c8e680cbf 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -8,11 +8,6 @@ struct unwind_table; #ifdef CONFIG_ARM_UNWIND -struct arm_unwind_mapping { - Elf_Shdr *unw_sec; - Elf_Shdr *sec_text; - struct unwind_table *unwind; -}; enum { ARM_SEC_INIT, ARM_SEC_DEVINIT, @@ -21,13 +16,13 @@ enum { ARM_SEC_DEVEXIT, ARM_SEC_MAX, }; +#endif + struct mod_arch_specific { - struct arm_unwind_mapping map[ARM_SEC_MAX]; -}; -#else -struct mod_arch_specific { -}; +#ifdef CONFIG_ARM_UNWIND + struct unwind_table *unwind[ARM_SEC_MAX]; #endif +}; /* * Include the ARM architecture version. diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 3a8fd5140d7..30ead135ff5 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -23,6 +23,8 @@ extern unsigned long kexec_indirection_page; extern unsigned long kexec_mach_type; extern unsigned long kexec_boot_atags; +static atomic_t waiting_for_crash_ipi; + /* * Provide a dummy crash_notes definition while crash dump arrives to arm. * This prevents breakage of crash_notes attribute in kernel/ksysfs.c. @@ -37,9 +39,37 @@ void machine_kexec_cleanup(struct kimage *image) { } +void machine_crash_nonpanic_core(void *unused) +{ + struct pt_regs regs; + + crash_setup_regs(®s, NULL); + printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n", + smp_processor_id()); + crash_save_cpu(®s, smp_processor_id()); + flush_cache_all(); + + atomic_dec(&waiting_for_crash_ipi); + while (1) + cpu_relax(); +} + void machine_crash_shutdown(struct pt_regs *regs) { + unsigned long msecs; + local_irq_disable(); + + atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); + smp_call_function(machine_crash_nonpanic_core, NULL, false); + msecs = 1000; /* Wait at most a second for the other cpus to stop */ + while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) { + mdelay(1); + msecs--; + } + if (atomic_read(&waiting_for_crash_ipi) > 0) + printk(KERN_WARNING "Non-crashing CPUs did not react to IPI\n"); + crash_save_cpu(regs, smp_processor_id()); printk(KERN_INFO "Loading crashdump kernel...\n"); diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index d9bd786ce23..0c1bb68ff4a 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -67,35 +67,6 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, char *secstrings, struct module *mod) { -#ifdef CONFIG_ARM_UNWIND - Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; - struct arm_unwind_mapping *maps = mod->arch.map; - - for (s = sechdrs; s < sechdrs_end; s++) { - char const *secname = secstrings + s->sh_name; - - if (strcmp(".ARM.exidx.init.text", secname) == 0) - maps[ARM_SEC_INIT].unw_sec = s; - else if (strcmp(".ARM.exidx.devinit.text", secname) == 0) - maps[ARM_SEC_DEVINIT].unw_sec = s; - else if (strcmp(".ARM.exidx", secname) == 0) - maps[ARM_SEC_CORE].unw_sec = s; - else if (strcmp(".ARM.exidx.exit.text", secname) == 0) - maps[ARM_SEC_EXIT].unw_sec = s; - else if (strcmp(".ARM.exidx.devexit.text", secname) == 0) - maps[ARM_SEC_DEVEXIT].unw_sec = s; - else if (strcmp(".init.text", secname) == 0) - maps[ARM_SEC_INIT].sec_text = s; - else if (strcmp(".devinit.text", secname) == 0) - maps[ARM_SEC_DEVINIT].sec_text = s; - else if (strcmp(".text", secname) == 0) - maps[ARM_SEC_CORE].sec_text = s; - else if (strcmp(".exit.text", secname) == 0) - maps[ARM_SEC_EXIT].sec_text = s; - else if (strcmp(".devexit.text", secname) == 0) - maps[ARM_SEC_DEVEXIT].sec_text = s; - } -#endif return 0; } @@ -300,41 +271,69 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, return -ENOEXEC; } -#ifdef CONFIG_ARM_UNWIND -static void register_unwind_tables(struct module *mod) +struct mod_unwind_map { + const Elf_Shdr *unw_sec; + const Elf_Shdr *txt_sec; +}; + +int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, + struct module *mod) { +#ifdef CONFIG_ARM_UNWIND + const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + struct mod_unwind_map maps[ARM_SEC_MAX]; int i; - for (i = 0; i < ARM_SEC_MAX; ++i) { - struct arm_unwind_mapping *map = &mod->arch.map[i]; - if (map->unw_sec && map->sec_text) - map->unwind = unwind_table_add(map->unw_sec->sh_addr, - map->unw_sec->sh_size, - map->sec_text->sh_addr, - map->sec_text->sh_size); + + memset(maps, 0, sizeof(maps)); + + for (s = sechdrs; s < sechdrs_end; s++) { + const char *secname = secstrs + s->sh_name; + + if (!(s->sh_flags & SHF_ALLOC)) + continue; + + if (strcmp(".ARM.exidx.init.text", secname) == 0) + maps[ARM_SEC_INIT].unw_sec = s; + else if (strcmp(".ARM.exidx.devinit.text", secname) == 0) + maps[ARM_SEC_DEVINIT].unw_sec = s; + else if (strcmp(".ARM.exidx", secname) == 0) + maps[ARM_SEC_CORE].unw_sec = s; + else if (strcmp(".ARM.exidx.exit.text", secname) == 0) + maps[ARM_SEC_EXIT].unw_sec = s; + else if (strcmp(".ARM.exidx.devexit.text", secname) == 0) + maps[ARM_SEC_DEVEXIT].unw_sec = s; + else if (strcmp(".init.text", secname) == 0) + maps[ARM_SEC_INIT].txt_sec = s; + else if (strcmp(".devinit.text", secname) == 0) + maps[ARM_SEC_DEVINIT].txt_sec = s; + else if (strcmp(".text", secname) == 0) + maps[ARM_SEC_CORE].txt_sec = s; + else if (strcmp(".exit.text", secname) == 0) + maps[ARM_SEC_EXIT].txt_sec = s; + else if (strcmp(".devexit.text", secname) == 0) + maps[ARM_SEC_DEVEXIT].txt_sec = s; } -} -static void unregister_unwind_tables(struct module *mod) -{ - int i = ARM_SEC_MAX; - while (--i >= 0) - unwind_table_del(mod->arch.map[i].unwind); -} -#else -static inline void register_unwind_tables(struct module *mod) { } -static inline void unregister_unwind_tables(struct module *mod) { } + for (i = 0; i < ARM_SEC_MAX; i++) + if (maps[i].unw_sec && maps[i].txt_sec) + mod->arch.unwind[i] = + unwind_table_add(maps[i].unw_sec->sh_addr, + maps[i].unw_sec->sh_size, + maps[i].txt_sec->sh_addr, + maps[i].txt_sec->sh_size); #endif - -int -module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, - struct module *module) -{ - register_unwind_tables(module); return 0; } void module_arch_cleanup(struct module *mod) { - unregister_unwind_tables(mod); +#ifdef CONFIG_ARM_UNWIND + int i; + + for (i = 0; i < ARM_SEC_MAX; i++) + if (mod->arch.unwind[i]) + unwind_table_del(mod->arch.unwind[i]); +#endif } diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 35882fbf37f..67f933ec417 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -127,8 +127,6 @@ static void __cpuinit twd_calibrate_rate(void) */ void __cpuinit twd_timer_setup(struct clock_event_device *clk) { - unsigned long flags; - twd_calibrate_rate(); clk->name = "local_timer"; @@ -143,10 +141,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clk->min_delta_ns = clockevent_delta2ns(0xf, clk); /* Make sure our local interrupt controller has this enabled */ - local_irq_save(flags); - irq_to_desc(clk->irq)->status |= IRQ_NOPROBE; - get_irq_chip(clk->irq)->unmask(clk->irq); - local_irq_restore(flags); + gic_enable_ppi(clk->irq); clockevents_register_device(clk); } diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 9ca4d581016..da30078a80c 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -69,13 +69,10 @@ void __init cns3xxx_map_io(void) } /* used by entry-macro.S */ -void __iomem *gic_cpu_base_addr; - void __init cns3xxx_init_irq(void) { - gic_cpu_base_addr = __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT); - gic_dist_init(0, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), 29); - gic_cpu_init(0, gic_cpu_base_addr); + gic_init(0, 29, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), + __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT)); } void cns3xxx_power_off(void) diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h index 6b33ec11346..ef9e5116b1a 100644 --- a/arch/arm/mach-cns3xxx/core.h +++ b/arch/arm/mach-cns3xxx/core.h @@ -11,7 +11,6 @@ #ifndef __CNS3XXX_CORE_H #define __CNS3XXX_CORE_H -extern void __iomem *gic_cpu_base_addr; extern struct sys_timer cns3xxx_timer; void __init cns3xxx_map_io(void); diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S index 5e1c5545680..6bd83ed90af 100644 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -9,74 +9,10 @@ */ #include <mach/hardware.h> -#include <asm/hardware/gic.h> +#include <asm/hardware/entry-macro-gic.S> .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h index 62b0a90309a..d1b954955c1 100644 --- a/arch/arm/mach-davinci/include/mach/io.h +++ b/arch/arm/mach-davinci/include/mach/io.h @@ -22,8 +22,8 @@ #define __mem_isa(a) (a) #ifndef __ASSEMBLER__ -#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t) -#define __arch_iounmap(v) davinci_iounmap(v) +#define __arch_ioremap davinci_ioremap +#define __arch_iounmap davinci_iounmap void __iomem *davinci_ioremap(unsigned long phys, size_t size, unsigned int type); diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 6258c90d020..1713ecf0c95 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -41,7 +41,7 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <plat/timer-sp.h> +#include <asm/hardware/timer-sp.h> #include "common.h" diff --git a/arch/arm/mach-iop13xx/include/mach/io.h b/arch/arm/mach-iop13xx/include/mach/io.h index a6e0f9e6ddc..dffb234bb96 100644 --- a/arch/arm/mach-iop13xx/include/mach/io.h +++ b/arch/arm/mach-iop13xx/include/mach/io.h @@ -35,7 +35,7 @@ extern u32 iop13xx_atux_mem_base; extern size_t iop13xx_atue_mem_size; extern size_t iop13xx_atux_mem_size; -#define __arch_ioremap(a, s, f) __iop13xx_ioremap(a, s, f) -#define __arch_iounmap(a) __iop13xx_iounmap(a) +#define __arch_ioremap __iop13xx_ioremap +#define __arch_iounmap __iop13xx_iounmap #endif diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h index 339e5854728..059c783ce0b 100644 --- a/arch/arm/mach-iop32x/include/mach/io.h +++ b/arch/arm/mach-iop32x/include/mach/io.h @@ -21,7 +21,7 @@ extern void __iop3xx_iounmap(void __iomem *addr); #define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) #define __mem_pci(a) (a) -#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f) -#define __arch_iounmap(a) __iop3xx_iounmap(a) +#define __arch_ioremap __iop3xx_ioremap +#define __arch_iounmap __iop3xx_iounmap #endif diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h index e99a7ed6d05..39e893e97c2 100644 --- a/arch/arm/mach-iop33x/include/mach/io.h +++ b/arch/arm/mach-iop33x/include/mach/io.h @@ -21,7 +21,7 @@ extern void __iop3xx_iounmap(void __iomem *addr); #define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) #define __mem_pci(a) (a) -#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f) -#define __arch_iounmap(a) __iop3xx_iounmap(a) +#define __arch_ioremap __iop3xx_ioremap +#define __arch_iounmap __iop3xx_iounmap #endif diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h index fd9ef8e519f..a1749d0fd89 100644 --- a/arch/arm/mach-ixp23xx/include/mach/io.h +++ b/arch/arm/mach-ixp23xx/include/mach/io.h @@ -45,8 +45,8 @@ ixp23xx_iounmap(void __iomem *addr) __iounmap(addr); } -#define __arch_ioremap(a,s,f) ixp23xx_ioremap(a,s,f) -#define __arch_iounmap(a) ixp23xx_iounmap(a) +#define __arch_ioremap ixp23xx_ioremap +#define __arch_iounmap ixp23xx_iounmap #endif diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index de274a1f19d..57b5410c31f 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -74,8 +74,8 @@ static inline void __indirect_iounmap(void __iomem *addr) __iounmap(addr); } -#define __arch_ioremap(a, s, f) __indirect_ioremap(a, s, f) -#define __arch_iounmap(a) __indirect_iounmap(a) +#define __arch_ioremap __indirect_ioremap +#define __arch_iounmap __indirect_iounmap #define writeb(v, p) __indirect_writeb(v, p) #define writew(v, p) __indirect_writew(v, p) diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index 44e8be04f25..1aaddc364f2 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -42,8 +42,8 @@ __arch_iounmap(void __iomem *addr) __iounmap(addr); } -#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) -#define __arch_iounmap(a) __arch_iounmap(a) +#define __arch_ioremap __arch_ioremap +#define __arch_iounmap __arch_iounmap #define __io(a) __io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 7486a681cc7..9b5eb2b4ae1 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -28,8 +28,6 @@ #include <mach/board.h> #include <mach/msm_iomap.h> -void __iomem *gic_cpu_base_addr; - unsigned long clk_get_max_axi_khz(void) { return 0; @@ -44,9 +42,8 @@ static void __init msm8x60_init_irq(void) { unsigned int i; - gic_dist_init(0, MSM_QGIC_DIST_BASE, GIC_PPI_START); - gic_cpu_base_addr = (void *)MSM_QGIC_CPU_BASE; - gic_cpu_init(0, MSM_QGIC_CPU_BASE); + gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, + (void *)MSM_QGIC_CPU_BASE); /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index 06e64e1fc28..d54c4f89a8b 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -105,6 +105,35 @@ omap_irq_base: .word 0 9999: .endm +#ifdef CONFIG_SMP + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt + * on the controller, since this requires the original irqstat + * value which we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + it cc + strcc \irqstat, [\base, #GIC_CPU_EOI] + it cs + cmpcs \irqnr, \irqnr + .endm + + /* As above, this assumes that irqstat and base are preserved */ + + .macro test_for_ltirq, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + mov \tmp, #0 + cmp \irqnr, #29 + itt eq + moveq \tmp, #1 + streq \irqstat, [\base, #GIC_CPU_EOI] + cmp \tmp, #0 + .endm +#endif /* CONFIG_SMP */ #else /* MULTI_OMAP2 */ @@ -141,74 +170,16 @@ omap_irq_base: .word 0 #ifdef CONFIG_ARCH_OMAP4 +#define HAVE_GET_IRQNR_PREAMBLE +#include <asm/hardware/entry-macro-gic.S> .macro get_irqnr_preamble, base, tmp ldr \base, =OMAP4_IRQ_BASE .endm - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an - * interrupt if it's between 30 and 1020. The test_for_ipi - * routine below will pick up on IPIs. - * A simple read from the controller will tell us the number - * of the highest priority enabled interrupt. - * We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #GIC_CPU_INTACK] - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - .endm #endif -#endif /* MULTI_OMAP2 */ - -#ifdef CONFIG_SMP - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt - * on the controller, since this requires the original irqstat - * value which we won't easily be able to recreate later. - */ - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - it cc - strcc \irqstat, [\base, #GIC_CPU_EOI] - it cs - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - itt eq - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm -#endif /* CONFIG_SMP */ +#endif /* MULTI_OMAP2 */ .macro irq_prio_table .endm diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h index 2744dfee1ff..5b0270b2893 100644 --- a/arch/arm/mach-omap2/include/mach/omap4-common.h +++ b/arch/arm/mach-omap2/include/mach/omap4-common.h @@ -24,7 +24,6 @@ extern void __iomem *l2cache_base; #endif -extern void __iomem *gic_cpu_base_addr; extern void __iomem *gic_dist_base_addr; extern void __init gic_init_irq(void); diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 9e9f70e18e3..9fbac2c3910 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -50,7 +50,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, gic_cpu_base_addr); + gic_secondary_init(0); /* * Synchronise with the boot thread. diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 2f895553e6a..666e852988d 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -26,21 +26,22 @@ void __iomem *l2cache_base; #endif -void __iomem *gic_cpu_base_addr; void __iomem *gic_dist_base_addr; void __init gic_init_irq(void) { + void __iomem *gic_cpu_base; + /* Static mapping, never released */ gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); BUG_ON(!gic_dist_base_addr); - gic_dist_init(0, gic_dist_base_addr, 29); /* Static mapping, never released */ - gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); - BUG_ON(!gic_cpu_base_addr); - gic_cpu_init(0, gic_cpu_base_addr); + gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); + BUG_ON(!gic_cpu_base); + + gic_init(0, 29, gic_dist_base_addr, gic_cpu_base); } #ifdef CONFIG_CACHE_L2X0 diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h index c47b033bd99..c5196101a23 100644 --- a/arch/arm/mach-orion5x/include/mach/io.h +++ b/arch/arm/mach-orion5x/include/mach/io.h @@ -38,8 +38,8 @@ __arch_iounmap(void __iomem *addr) __iounmap(addr); } -#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) -#define __arch_iounmap(a) __arch_iounmap(a) +#define __arch_ioremap __arch_ioremap +#define __arch_iounmap __arch_iounmap #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 07c08151dfe..14fbe50376b 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -50,13 +50,10 @@ #include <mach/clkdev.h> #include <mach/platform.h> #include <mach/irqs.h> -#include <plat/timer-sp.h> +#include <asm/hardware/timer-sp.h> #include "core.h" -/* used by entry-macro.S and platsmp.c */ -void __iomem *gic_cpu_base_addr; - #ifdef CONFIG_ZONE_DMA /* * Adjust the zones if there are restrictions for DMA access. diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 781bca68a9f..693239ddc39 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -53,7 +53,6 @@ extern struct platform_device realview_i2c_device; extern struct mmci_platform_data realview_mmc0_plat_data; extern struct mmci_platform_data realview_mmc1_plat_data; extern struct clcd_board clcd_plat_data; -extern void __iomem *gic_cpu_base_addr; extern void __iomem *timer0_va_base; extern void __iomem *timer1_va_base; extern void __iomem *timer2_va_base; diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S index 340a5c27694..4071164aeba 100644 --- a/arch/arm/mach-realview/include/mach/entry-macro.S +++ b/arch/arm/mach-realview/include/mach/entry-macro.S @@ -8,74 +8,11 @@ * warranty of any kind, whether express or implied. */ #include <mach/hardware.h> -#include <asm/hardware/gic.h> +#include <asm/hardware/entry-macro-gic.S> .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 009265818d5..6da8a2e53c4 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -69,7 +69,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, gic_cpu_base_addr); + gic_secondary_init(0); /* * let the primary processor know we're out of the diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index f2697106f80..6ef5c5e528b 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -364,21 +364,19 @@ static void __init gic_init_irq(void) writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); /* core tile GIC, primary */ - gic_cpu_base_addr = __io_address(REALVIEW_EB11MP_GIC_CPU_BASE); - gic_dist_init(0, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), 29); - gic_cpu_init(0, gic_cpu_base_addr); + gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), + __io_address(REALVIEW_EB11MP_GIC_CPU_BASE)); #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB /* board GIC, secondary */ - gic_dist_init(1, __io_address(REALVIEW_EB_GIC_DIST_BASE), 64); - gic_cpu_init(1, __io_address(REALVIEW_EB_GIC_CPU_BASE)); + gic_init(1, 64, __io_address(REALVIEW_EB_GIC_DIST_BASE), + __io_address(REALVIEW_EB_GIC_CPU_BASE)); gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1); #endif } else { /* board GIC, primary */ - gic_cpu_base_addr = __io_address(REALVIEW_EB_GIC_CPU_BASE); - gic_dist_init(0, __io_address(REALVIEW_EB_GIC_DIST_BASE), 29); - gic_cpu_init(0, gic_cpu_base_addr); + gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE), + __io_address(REALVIEW_EB_GIC_CPU_BASE)); } } diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index a4125619d71..cbdc97a5685 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -304,13 +304,14 @@ static struct platform_device char_lcd_device = { static void __init gic_init_irq(void) { /* ARM1176 DevChip GIC, primary */ - gic_cpu_base_addr = __io_address(REALVIEW_DC1176_GIC_CPU_BASE); - gic_dist_init(0, __io_address(REALVIEW_DC1176_GIC_DIST_BASE), IRQ_DC1176_GIC_START); - gic_cpu_init(0, gic_cpu_base_addr); + gic_init(0, IRQ_DC1176_GIC_START, + __io_address(REALVIEW_DC1176_GIC_DIST_BASE), + __io_address(REALVIEW_DC1176_GIC_CPU_BASE)); /* board GIC, secondary */ - gic_dist_init(1, __io_address(REALVIEW_PB1176_GIC_DIST_BASE), IRQ_PB1176_GIC_START); - gic_cpu_init(1, __io_address(REALVIEW_PB1176_GIC_CPU_BASE)); + gic_init(1, IRQ_PB1176_GIC_START, + __io_address(REALVIEW_PB1176_GIC_DIST_BASE), + __io_address(REALVIEW_PB1176_GIC_CPU_BASE)); gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1); } diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 117b95b2ca1..8e8ab7d29a6 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -309,13 +309,13 @@ static void __init gic_init_irq(void) writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); /* ARM11MPCore test chip GIC, primary */ - gic_cpu_base_addr = __io_address(REALVIEW_TC11MP_GIC_CPU_BASE); - gic_dist_init(0, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE), 29); - gic_cpu_init(0, gic_cpu_base_addr); + gic_init(0, 29, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE), + __io_address(REALVIEW_TC11MP_GIC_CPU_BASE)); /* board GIC, secondary */ - gic_dist_init(1, __io_address(REALVIEW_PB11MP_GIC_DIST_BASE), IRQ_PB11MP_GIC_START); - gic_cpu_init(1, __io_address(REALVIEW_PB11MP_GIC_CPU_BASE)); + gic_init(1, IRQ_PB11MP_GIC_START, + __io_address(REALVIEW_PB11MP_GIC_DIST_BASE), + __io_address(REALVIEW_PB11MP_GIC_CPU_BASE)); gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1); } diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 929b8dc12e8..841118e3e11 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -273,9 +273,9 @@ static struct platform_device pmu_device = { static void __init gic_init_irq(void) { /* ARM PB-A8 on-board GIC */ - gic_cpu_base_addr = __io_address(REALVIEW_PBA8_GIC_CPU_BASE); - gic_dist_init(0, __io_address(REALVIEW_PBA8_GIC_DIST_BASE), IRQ_PBA8_GIC_START); - gic_cpu_init(0, __io_address(REALVIEW_PBA8_GIC_CPU_BASE)); + gic_init(0, IRQ_PBA8_GIC_START, + __io_address(REALVIEW_PBA8_GIC_DIST_BASE), + __io_address(REALVIEW_PBA8_GIC_CPU_BASE)); } static void __init realview_pba8_timer_init(void) diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index b9f9e20031a..02b755b009d 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -313,15 +313,12 @@ static void __init gic_init_irq(void) { /* ARM PBX on-board GIC */ if (core_tile_pbx11mp() || core_tile_pbxa9mp()) { - gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE); - gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE), - 29); - gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE)); + gic_init(0, 29, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE), + __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE)); } else { - gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE); - gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE), - IRQ_PBX_GIC_START); - gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE)); + gic_init(0, IRQ_PBX_GIC_START, + __io_address(REALVIEW_PBX_GIC_DIST_BASE), + __io_address(REALVIEW_PBX_GIC_CPU_BASE)); } } diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c index 82ce4aa6d61..72ab289e781 100644 --- a/arch/arm/mach-s5pv310/cpu.c +++ b/arch/arm/mach-s5pv310/cpu.c @@ -24,8 +24,6 @@ #include <mach/regs-irq.h> -void __iomem *gic_cpu_base_addr; - extern int combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start); extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); @@ -122,9 +120,7 @@ void __init s5pv310_init_irq(void) { int irq; - gic_cpu_base_addr = S5P_VA_GIC_CPU; - gic_dist_init(0, S5P_VA_GIC_DIST, IRQ_LOCALTIMER); - gic_cpu_init(0, S5P_VA_GIC_CPU); + gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); for (irq = 0; irq < MAX_COMBINER_NR; irq++) { combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h index b7ec252384f..e1cc6a251c6 100644 --- a/arch/arm/mach-s5pv310/include/mach/smp.h +++ b/arch/arm/mach-s5pv310/include/mach/smp.h @@ -9,8 +9,6 @@ #include <asm/hardware/gic.h> #include <asm/smp_mpidr.h> -extern void __iomem *gic_cpu_base_addr; - /* * We use IRQ1 as the IPI */ diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c index d357c198ede..15929c169f8 100644 --- a/arch/arm/mach-s5pv310/platsmp.c +++ b/arch/arm/mach-s5pv310/platsmp.c @@ -54,7 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, gic_cpu_base_addr); + gic_secondary_init(0); /* * let the primary processor know we're out of the diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 5da8c35aa0d..42625e4d949 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -118,6 +118,16 @@ config SA1100_LART (also known as the LART). See <http://www.lartmaker.nl/> for information on the LART. +config SA1100_NANOENGINE + bool "nanoEngine" + select CPU_FREQ_SA1110 + select PCI + select PCI_NANOENGINE + help + Say Y here if you are using the Bright Star Engineering nanoEngine. + See <http://www.brightstareng.com/arm/nanoeng.htm> for information + on the BSE nanoEngine. + config SA1100_PLEB bool "PLEB" select CPU_FREQ_SA1100 diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 89349c1dd7a..e697691eed2 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -37,6 +37,9 @@ obj-$(CONFIG_SA1100_JORNADA720_SSP) += jornada720_ssp.o obj-$(CONFIG_SA1100_LART) += lart.o led-$(CONFIG_SA1100_LART) += leds-lart.o +obj-$(CONFIG_SA1100_NANOENGINE) += nanoengine.o +obj-$(CONFIG_PCI_NANOENGINE) += pci-nanoengine.o + obj-$(CONFIG_SA1100_PLEB) += pleb.o obj-$(CONFIG_SA1100_SHANNON) += shannon.o diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 96f7dc103b5..07d4e8ba371 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -94,48 +94,47 @@ #include "generic.h" -typedef struct { +struct sa1100_dram_regs { int speed; u32 mdcnfg; u32 mdcas0; u32 mdcas1; u32 mdcas2; -} sa1100_dram_regs_t; +}; static struct cpufreq_driver sa1100_driver; -static sa1100_dram_regs_t sa1100_dram_settings[] = -{ - /* speed, mdcnfg, mdcas0, mdcas1, mdcas2 clock frequency */ - { 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff }, /* 59.0 MHz */ - { 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff }, /* 73.7 MHz */ - { 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff }, /* 88.5 MHz */ - { 103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff }, /* 103.2 MHz */ - { 118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff }, /* 118.0 MHz */ - { 132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff }, /* 132.7 MHz */ - { 147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff }, /* 147.5 MHz */ - { 162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff }, /* 162.2 MHz */ - { 176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff }, /* 176.9 MHz */ - { 191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff }, /* 191.7 MHz */ - { 206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff }, /* 206.4 MHz */ - { 221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff }, /* 221.2 MHz */ - { 235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1 }, /* 235.9 MHz */ - { 250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3 }, /* 250.7 MHz */ - { 265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3 }, /* 265.4 MHz */ - { 280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87 }, /* 280.2 MHz */ +static struct sa1100_dram_regs sa1100_dram_settings[] = { + /*speed, mdcnfg, mdcas0, mdcas1, mdcas2, clock freq */ + { 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 59.0 MHz */ + { 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 73.7 MHz */ + { 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 88.5 MHz */ + {103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */ + {118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */ + {132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */ + {147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */ + {162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */ + {176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */ + {191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */ + {206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */ + {221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */ + {235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */ + {250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */ + {265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */ + {280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */ { 0, 0, 0, 0, 0 } /* last entry */ }; static void sa1100_update_dram_timings(int current_speed, int new_speed) { - sa1100_dram_regs_t *settings = sa1100_dram_settings; + struct sa1100_dram_regs *settings = sa1100_dram_settings; /* find speed */ while (settings->speed != 0) { - if(new_speed == settings->speed) + if (new_speed == settings->speed) break; - + settings++; } @@ -149,7 +148,7 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed) /* We're going FASTER, so first relax the memory * timings before changing the core frequency */ - + /* Half the memory access clock */ MDCNFG |= MDCNFG_CDB2; @@ -187,7 +186,7 @@ static int sa1100_target(struct cpufreq_policy *policy, struct cpufreq_freqs freqs; new_ppcr = sa11x0_freq_to_ppcr(target_freq); - switch(relation){ + switch (relation) { case CPUFREQ_RELATION_L: if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max) new_ppcr--; diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c index 7252874d328..675bf8ef97e 100644 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ b/arch/arm/mach-sa1100/cpu-sa1110.c @@ -16,28 +16,24 @@ * * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type */ -#include <linux/moduleparam.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/sched.h> #include <linux/cpufreq.h> #include <linux/delay.h> #include <linux/init.h> -#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/moduleparam.h> +#include <linux/types.h> -#include <mach/hardware.h> #include <asm/cputype.h> #include <asm/mach-types.h> -#include <asm/system.h> + +#include <mach/hardware.h> #include "generic.h" #undef DEBUG -static struct cpufreq_driver sa1110_driver; - struct sdram_params { - const char name[16]; + const char name[20]; u_char rows; /* bits */ u_char cas_latency; /* cycles */ u_char tck; /* clock cycle time (ns) */ @@ -107,6 +103,15 @@ static struct sdram_params sdram_tbl[] __initdata = { .twr = 8, .refresh = 64000, .cas_latency = 3, + }, { /* Micron MT48LC8M16A2TG-75 */ + .name = "MT48LC8M16A2TG-75", + .rows = 12, + .tck = 8, + .trcd = 20, + .trp = 20, + .twr = 8, + .refresh = 64000, + .cas_latency = 3, }, }; @@ -180,11 +185,13 @@ sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz, sd->mdrefr |= MDREFR_K1DB2; /* initial number of '1's in MDCAS + 1 */ - set_mdcas(sd->mdcas, sd_khz >= 62000, ns_to_cycles(sdram->trcd, mem_khz)); + set_mdcas(sd->mdcas, sd_khz >= 62000, + ns_to_cycles(sdram->trcd, mem_khz)); #ifdef DEBUG - printk("MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n", - sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1], sd->mdcas[2]); + printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n", + sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1], + sd->mdcas[2]); #endif } @@ -213,7 +220,7 @@ sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram) #ifdef DEBUG mdelay(250); - printk("new dri value = %d\n", dri); + printk(KERN_DEBUG "new dri value = %d\n", dri); #endif sdram_set_refresh(dri); @@ -232,7 +239,7 @@ static int sa1110_target(struct cpufreq_policy *policy, unsigned long flags; unsigned int ppcr, unused; - switch(relation){ + switch (relation) { case CPUFREQ_RELATION_L: ppcr = sa11x0_freq_to_ppcr(target_freq); if (sa11x0_ppcr_to_freq(ppcr) > policy->max) @@ -280,11 +287,10 @@ static int sa1110_target(struct cpufreq_policy *policy, * We wait 20ms to be safe. */ sdram_set_refresh(2); - if (!irqs_disabled()) { + if (!irqs_disabled()) msleep(20); - } else { + else mdelay(20); - } /* * Reprogram the DRAM timings with interrupts disabled, and @@ -295,7 +301,7 @@ static int sa1110_target(struct cpufreq_policy *policy, local_irq_save(flags); asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0)); udelay(10); - __asm__ __volatile__(" \n\ + __asm__ __volatile__("\n\ b 2f \n\ .align 5 \n\ 1: str %3, [%1, #0] @ MDCNFG \n\ @@ -336,7 +342,9 @@ static int __init sa1110_cpu_init(struct cpufreq_policy *policy) return 0; } -static struct cpufreq_driver sa1110_driver = { +/* sa1110_driver needs __refdata because it must remain after init registers + * it with cpufreq_register_driver() */ +static struct cpufreq_driver sa1110_driver __refdata = { .flags = CPUFREQ_STICKY, .verify = sa11x0_verify_speed, .target = sa1110_target, @@ -349,7 +357,8 @@ static struct sdram_params *sa1110_find_sdram(const char *name) { struct sdram_params *sdram; - for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); sdram++) + for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); + sdram++) if (strcmp(name, sdram->name) == 0) return sdram; @@ -369,14 +378,14 @@ static int __init sa1110_clk_init(void) if (!name[0]) { if (machine_is_assabet()) name = "TC59SM716-CL3"; - if (machine_is_pt_system3()) name = "K4S641632D"; - if (machine_is_h3100()) name = "KM416S4030CT"; if (machine_is_jornada720()) - name = "K4S281632B-1H"; + name = "K4S281632B-1H"; + if (machine_is_nanoengine()) + name = "MT48LC8M16A2TG-75"; } sdram = sa1110_find_sdram(name); diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 3c1fcd69671..3555d616774 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -163,10 +163,15 @@ static void sa11x0_register_device(struct platform_device *dev, void *data) static struct resource sa11x0udc_resources[] = { [0] = { - .start = 0x80000000, - .end = 0x8000ffff, + .start = __PREG(Ser0UDCCR), + .end = __PREG(Ser0UDCCR) + 0xffff, .flags = IORESOURCE_MEM, }, + [1] = { + .start = IRQ_Ser0UDC, + .end = IRQ_Ser0UDC, + .flags = IORESOURCE_IRQ, + }, }; static u64 sa11x0udc_dma_mask = 0xffffffffUL; @@ -184,10 +189,15 @@ static struct platform_device sa11x0udc_device = { static struct resource sa11x0uart1_resources[] = { [0] = { - .start = 0x80010000, - .end = 0x8001ffff, + .start = __PREG(Ser1UTCR0), + .end = __PREG(Ser1UTCR0) + 0xffff, .flags = IORESOURCE_MEM, }, + [1] = { + .start = IRQ_Ser1UART, + .end = IRQ_Ser1UART, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device sa11x0uart1_device = { @@ -199,10 +209,15 @@ static struct platform_device sa11x0uart1_device = { static struct resource sa11x0uart3_resources[] = { [0] = { - .start = 0x80050000, - .end = 0x8005ffff, + .start = __PREG(Ser3UTCR0), + .end = __PREG(Ser3UTCR0) + 0xffff, .flags = IORESOURCE_MEM, }, + [1] = { + .start = IRQ_Ser3UART, + .end = IRQ_Ser3UART, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device sa11x0uart3_device = { @@ -214,10 +229,15 @@ static struct platform_device sa11x0uart3_device = { static struct resource sa11x0mcp_resources[] = { [0] = { - .start = 0x80060000, - .end = 0x8006ffff, + .start = __PREG(Ser4MCCR0), + .end = __PREG(Ser4MCCR0) + 0xffff, .flags = IORESOURCE_MEM, }, + [1] = { + .start = IRQ_Ser4MCP, + .end = IRQ_Ser4MCP, + .flags = IORESOURCE_IRQ, + }, }; static u64 sa11x0mcp_dma_mask = 0xffffffffUL; @@ -244,6 +264,11 @@ static struct resource sa11x0ssp_resources[] = { .end = 0x8007ffff, .flags = IORESOURCE_MEM, }, + [1] = { + .start = IRQ_Ser4SSP, + .end = IRQ_Ser4SSP, + .flags = IORESOURCE_IRQ, + }, }; static u64 sa11x0ssp_dma_mask = 0xffffffffUL; diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h index 99f5856d8de..967ae768439 100644 --- a/arch/arm/mach-sa1100/include/mach/hardware.h +++ b/arch/arm/mach-sa1100/include/mach/hardware.h @@ -76,4 +76,12 @@ static inline unsigned long get_clock_tick_rate(void) #include "SA-1101.h" #endif +#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_PCI) +#define PCIBIOS_MIN_IO 0 +#define PCIBIOS_MIN_MEM 0 +#define pcibios_assign_all_busses() 1 +#define HAVE_ARCH_PCI_SET_DMA_MASK 1 +#endif + + #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-sa1100/include/mach/nanoengine.h b/arch/arm/mach-sa1100/include/mach/nanoengine.h new file mode 100644 index 00000000000..14f8382d066 --- /dev/null +++ b/arch/arm/mach-sa1100/include/mach/nanoengine.h @@ -0,0 +1,52 @@ +/* + * arch/arm/mach-sa1100/include/mach/nanoengine.h + * + * This file contains the hardware specific definitions for nanoEngine. + * Only include this file from SA1100-specific files. + * + * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __ASM_ARCH_NANOENGINE_H +#define __ASM_ARCH_NANOENGINE_H + +#include <mach/irqs.h> + +#define GPIO_PC_READY0 GPIO_GPIO(11) /* ready for socket 0 (active high)*/ +#define GPIO_PC_READY1 GPIO_GPIO(12) /* ready for socket 1 (active high) */ +#define GPIO_PC_CD0 GPIO_GPIO(13) /* detect for socket 0 (active low) */ +#define GPIO_PC_CD1 GPIO_GPIO(14) /* detect for socket 1 (active low) */ +#define GPIO_PC_RESET0 GPIO_GPIO(15) /* reset socket 0 */ +#define GPIO_PC_RESET1 GPIO_GPIO(16) /* reset socket 1 */ + +#define NANOENGINE_IRQ_GPIO_PCI IRQ_GPIO0 +#define NANOENGINE_IRQ_GPIO_PC_READY0 IRQ_GPIO11 +#define NANOENGINE_IRQ_GPIO_PC_READY1 IRQ_GPIO12 +#define NANOENGINE_IRQ_GPIO_PC_CD0 IRQ_GPIO13 +#define NANOENGINE_IRQ_GPIO_PC_CD1 IRQ_GPIO14 + +/* + * nanoEngine Memory Map: + * + * 0000.0000 - 003F.0000 - 4 MB Flash + * C000.0000 - C1FF.FFFF - 32 MB SDRAM + * 1860.0000 - 186F.FFFF - 1 MB Internal PCI Memory Read/Write + * 18A1.0000 - 18A1.FFFF - 64 KB Internal PCI Config Space + * 4000.0000 - 47FF.FFFF - 128 MB External Bus I/O - Multiplexed Mode + * 4800.0000 - 4FFF.FFFF - 128 MB External Bus I/O - Non-Multiplexed Mode + * + */ + +#define NANO_PCI_MEM_RW_PHYS 0x18600000 +#define NANO_PCI_MEM_RW_VIRT 0xf1000000 +#define NANO_PCI_MEM_RW_SIZE SZ_1M +#define NANO_PCI_CONFIG_SPACE_PHYS 0x18A10000 +#define NANO_PCI_CONFIG_SPACE_VIRT 0xf2000000 +#define NANO_PCI_CONFIG_SPACE_SIZE SZ_64K + +#endif + diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c new file mode 100644 index 00000000000..72087f0658b --- /dev/null +++ b/arch/arm/mach-sa1100/nanoengine.c @@ -0,0 +1,119 @@ +/* + * linux/arch/arm/mach-sa1100/nanoengine.c + * + * Bright Star Engineering's nanoEngine board init code. + * + * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/root_dev.h> + +#include <asm/mach-types.h> +#include <asm/setup.h> + +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> +#include <asm/mach/serial_sa1100.h> + +#include <mach/hardware.h> +#include <mach/nanoengine.h> + +#include "generic.h" + +/* Flash bank 0 */ +static struct mtd_partition nanoengine_partitions[] = { + { + .name = "nanoEngine boot firmware and parameter table", + .size = 0x00010000, /* 32K */ + .offset = 0, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel/initrd reserved", + .size = 0x002f0000, + .offset = 0x00010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "experimental filesystem allocation", + .size = 0x00100000, + .offset = 0x00300000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct flash_platform_data nanoengine_flash_data = { + .map_name = "jedec_probe", + .parts = nanoengine_partitions, + .nr_parts = ARRAY_SIZE(nanoengine_partitions), +}; + +static struct resource nanoengine_flash_resources[] = { + { + .start = SA1100_CS0_PHYS, + .end = SA1100_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = SA1100_CS1_PHYS, + .end = SA1100_CS1_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct map_desc nanoengine_io_desc[] __initdata = { + { + /* System Registers */ + .virtual = 0xf0000000, + .pfn = __phys_to_pfn(0x10000000), + .length = 0x00100000, + .type = MT_DEVICE + }, { + /* Internal PCI Memory Read/Write */ + .virtual = NANO_PCI_MEM_RW_VIRT, + .pfn = __phys_to_pfn(NANO_PCI_MEM_RW_PHYS), + .length = NANO_PCI_MEM_RW_SIZE, + .type = MT_DEVICE + }, { + /* Internal PCI Config Space */ + .virtual = NANO_PCI_CONFIG_SPACE_VIRT, + .pfn = __phys_to_pfn(NANO_PCI_CONFIG_SPACE_PHYS), + .length = NANO_PCI_CONFIG_SPACE_SIZE, + .type = MT_DEVICE + } +}; + +static void __init nanoengine_map_io(void) +{ + sa1100_map_io(); + iotable_init(nanoengine_io_desc, ARRAY_SIZE(nanoengine_io_desc)); + + sa1100_register_uart(0, 1); + sa1100_register_uart(1, 2); + sa1100_register_uart(2, 3); + Ser1SDCR0 |= SDCR0_UART; + /* disable IRDA -- UART2 is used as a normal serial port */ + Ser2UTCR4 = 0; + Ser2HSCR0 = 0; +} + +static void __init nanoengine_init(void) +{ + sa11x0_register_mtd(&nanoengine_flash_data, nanoengine_flash_resources, + ARRAY_SIZE(nanoengine_flash_resources)); +} + +MACHINE_START(NANOENGINE, "BSE nanoEngine") + .boot_params = 0xc0000000, + .map_io = nanoengine_map_io, + .init_irq = sa1100_init_irq, + .timer = &sa1100_timer, + .init_machine = nanoengine_init, +MACHINE_END diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c new file mode 100644 index 00000000000..fba7a913f12 --- /dev/null +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -0,0 +1,284 @@ +/* + * linux/arch/arm/mach-sa1100/pci-nanoengine.c + * + * PCI functions for BSE nanoEngine PCI + * + * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/pci.h> +#include <linux/spinlock.h> + +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +#include <mach/nanoengine.h> + +static DEFINE_SPINLOCK(nano_lock); + +static int nanoengine_get_pci_address(struct pci_bus *bus, + unsigned int devfn, int where, unsigned long *address) +{ + int ret = PCIBIOS_DEVICE_NOT_FOUND; + unsigned int busnr = bus->number; + + *address = NANO_PCI_CONFIG_SPACE_VIRT + + ((bus->number << 16) | (devfn << 8) | (where & ~3)); + + ret = (busnr > 255 || devfn > 255 || where > 255) ? + PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; + + return ret; +} + +static int nanoengine_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + int ret; + unsigned long address; + unsigned long flags; + u32 v; + + /* nanoEngine PCI bridge does not return -1 for a non-existing + * device. We must fake the answer. We know that the only valid + * device is device zero at bus 0, which is the network chip. */ + if (bus->number != 0 || (devfn >> 3) != 0) { + v = -1; + nanoengine_get_pci_address(bus, devfn, where, &address); + goto exit_function; + } + + spin_lock_irqsave(&nano_lock, flags); + + ret = nanoengine_get_pci_address(bus, devfn, where, &address); + if (ret != PCIBIOS_SUCCESSFUL) + return ret; + v = __raw_readl(address); + + spin_unlock_irqrestore(&nano_lock, flags); + + v >>= ((where & 3) * 8); + v &= (unsigned long)(-1) >> ((4 - size) * 8); + +exit_function: + *val = v; + return PCIBIOS_SUCCESSFUL; +} + +static int nanoengine_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + int ret; + unsigned long address; + unsigned long flags; + unsigned shift; + u32 v; + + shift = (where & 3) * 8; + + spin_lock_irqsave(&nano_lock, flags); + + ret = nanoengine_get_pci_address(bus, devfn, where, &address); + if (ret != PCIBIOS_SUCCESSFUL) + return ret; + v = __raw_readl(address); + switch (size) { + case 1: + v &= ~(0xFF << shift); + v |= val << shift; + break; + case 2: + v &= ~(0xFFFF << shift); + v |= val << shift; + break; + case 4: + v = val; + break; + } + __raw_writel(v, address); + + spin_unlock_irqrestore(&nano_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pci_nano_ops = { + .read = nanoengine_read_config, + .write = nanoengine_write_config, +}; + +static int __init pci_nanoengine_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + return NANOENGINE_IRQ_GPIO_PCI; +} + +struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &pci_nano_ops, sys); +} + +static struct resource pci_io_ports = { + .name = "PCI IO", + .start = 0x400, + .end = 0x7FF, + .flags = IORESOURCE_IO, +}; + +static struct resource pci_non_prefetchable_memory = { + .name = "PCI non-prefetchable", + .start = NANO_PCI_MEM_RW_PHYS, + /* nanoEngine documentation says there is a 1 Megabyte window here, + * but PCI reports just 128 + 8 kbytes. */ + .end = NANO_PCI_MEM_RW_PHYS + NANO_PCI_MEM_RW_SIZE - 1, +/* .end = NANO_PCI_MEM_RW_PHYS + SZ_128K + SZ_8K - 1,*/ + .flags = IORESOURCE_MEM, +}; + +/* + * nanoEngine PCI reports 1 Megabyte of prefetchable memory, but it + * overlaps with previously defined memory. + * + * Here is what happens: + * +# dmesg +... +pci 0000:00:00.0: [8086:1209] type 0 class 0x000200 +pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff] +pci 0000:00:00.0: reg 14: [io 0x0000-0x003f] +pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff] +pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref] +pci 0000:00:00.0: supports D1 D2 +pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot +pci 0000:00:00.0: PME# disabled +PCI: bus0: Fast back to back transfers enabled +pci 0000:00:00.0: BAR 6: can't assign mem pref (size 0x100000) +pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff] +pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff]) +pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff] +pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff]) +pci 0000:00:00.0: BAR 1: assigned [io 0x0400-0x043f] +pci 0000:00:00.0: BAR 1: set to [io 0x0400-0x043f] (PCI address [0x0-0x3f]) + * + * On the other hand, if we do not request the prefetchable memory resource, + * linux will alloc it first and the two non-prefetchable memory areas that + * are our real interest will not be mapped. So we choose to map it to an + * unused area. It gets recognized as expansion ROM, but becomes disabled. + * + * Here is what happens then: + * +# dmesg +... +pci 0000:00:00.0: [8086:1209] type 0 class 0x000200 +pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff] +pci 0000:00:00.0: reg 14: [io 0x0000-0x003f] +pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff] +pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref] +pci 0000:00:00.0: supports D1 D2 +pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot +pci 0000:00:00.0: PME# disabled +PCI: bus0: Fast back to back transfers enabled +pci 0000:00:00.0: BAR 6: assigned [mem 0x78000000-0x780fffff pref] +pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff] +pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff]) +pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff] +pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff]) +pci 0000:00:00.0: BAR 1: assigned [io 0x0400-0x043f] +pci 0000:00:00.0: BAR 1: set to [io 0x0400-0x043f] (PCI address [0x0-0x3f]) + +# lspci -vv -s 0000:00:00.0 +00:00.0 Class 0200: Device 8086:1209 (rev 09) + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ INTx- + Latency: 0 (2000ns min, 14000ns max), Cache Line Size: 32 bytes + Interrupt: pin A routed to IRQ 0 + Region 0: Memory at 18620000 (32-bit, non-prefetchable) [size=4K] + Region 1: I/O ports at 0400 [size=64] + Region 2: [virtual] Memory at 18600000 (32-bit, non-prefetchable) [size=128K] + [virtual] Expansion ROM at 78000000 [disabled] [size=1M] + Capabilities: [dc] Power Management version 2 + Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) + Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- + Kernel driver in use: e100 + Kernel modules: e100 + * + */ +static struct resource pci_prefetchable_memory = { + .name = "PCI prefetchable", + .start = 0x78000000, + .end = 0x78000000 + NANO_PCI_MEM_RW_SIZE - 1, + .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, +}; + +static int __init pci_nanoengine_setup_resources(struct resource **resource) +{ + if (request_resource(&ioport_resource, &pci_io_ports)) { + printk(KERN_ERR "PCI: unable to allocate io port region\n"); + return -EBUSY; + } + if (request_resource(&iomem_resource, &pci_non_prefetchable_memory)) { + release_resource(&pci_io_ports); + printk(KERN_ERR "PCI: unable to allocate non prefetchable\n"); + return -EBUSY; + } + if (request_resource(&iomem_resource, &pci_prefetchable_memory)) { + release_resource(&pci_io_ports); + release_resource(&pci_non_prefetchable_memory); + printk(KERN_ERR "PCI: unable to allocate prefetchable\n"); + return -EBUSY; + } + resource[0] = &pci_io_ports; + resource[1] = &pci_non_prefetchable_memory; + resource[2] = &pci_prefetchable_memory; + + return 1; +} + +int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys) +{ + int ret = 0; + + if (nr == 0) { + sys->mem_offset = NANO_PCI_MEM_RW_PHYS; + sys->io_offset = 0x400; + ret = pci_nanoengine_setup_resources(sys->resource); + /* Enable alternate memory bus master mode, see + * "Intel StrongARM SA1110 Developer's Manual", + * section 10.8, "Alternate Memory Bus Master Mode". */ + GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT; + GAFR |= GPIO_MBGNT | GPIO_MBREQ; + TUCR |= TUCR_MBGPIO; + } + + return ret; +} + +static struct hw_pci nanoengine_pci __initdata = { + .map_irq = pci_nanoengine_map_irq, + .nr_controllers = 1, + .scan = pci_nanoengine_scan_bus, + .setup = pci_nanoengine_setup, +}; + +static int __init nanoengine_pci_init(void) +{ + if (machine_is_nanoengine()) + pci_common_init(&nanoengine_pci); + return 0; +} + +subsys_initcall(nanoengine_pci_init); diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 27692d0ffbe..cfb76077bd2 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -166,9 +166,6 @@ static void __init simpad_map_io(void) PCFR = 0; PSDR = 0; - sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources, - ARRAY_SIZE(simpad_flash_resources)); - sa11x0_register_mcp(&simpad_mcp_data); } static void simpad_power_off(void) @@ -216,6 +213,10 @@ static int __init simpad_init(void) pm_power_off = simpad_power_off; + sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources, + ARRAY_SIZE(simpad_flash_resources)); + sa11x0_register_mcp(&simpad_mcp_data); + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if(ret) printk(KERN_WARNING "simpad: Unable to register mq200 framebuffer device"); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index d440e5f456a..ac429ff2c20 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -61,6 +61,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/setup.h> /* * Address Interface BusWidth note diff --git a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt new file mode 100644 index 00000000000..e3ebfa73956 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt @@ -0,0 +1,87 @@ +LIST "partner-jet-setup.txt" +LIST "(C) Copyright 2010 Renesas Solutions Corp" +LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>" + +LIST "RWT Setting" +EW 0xE6020004, 0xA500 +EW 0xE6030004, 0xA500 + +DD 0x01001000, 0x01001000 + +LIST "GPIO Setting" +EB 0xE6051013, 0xA2 + +LIST "CPG" +ED 0xE6150080, 0x00000180 +ED 0xE61500C0, 0x00000002 + +WAIT 1, 0xFE40009C + +LIST "FRQCR" +ED 0xE6150000, 0x2D1305C3 +ED 0xE61500E0, 0x9E40358E +ED 0xE6150004, 0x80331050 + +WAIT 1, 0xFE40009C + +ED 0xE61500E4, 0x00002000 + +WAIT 1, 0xFE40009C + +LIST "PLL" +ED 0xE6150028, 0x00004000 + +WAIT 1, 0xFE40009C + +ED 0xE615002C, 0x93000040 + +WAIT 1, 0xFE40009C + +LIST "BSC" +ED 0xFEC10000, 0x00E0001B + +LIST "SBSC1" +ED 0xFE400354, 0x01AD8000 +ED 0xFE400354, 0x01AD8001 + +WAIT 5, 0xFE40009C + +ED 0xFE400008, 0xBCC90151 +ED 0xFE400040, 0x41774113 +ED 0xFE400044, 0x2712E229 +ED 0xFE400048, 0x20C18505 +ED 0xFE40004C, 0x00110209 +ED 0xFE400010, 0x00000087 + +WAIT 10, 0xFE40009C + +ED 0xFE400084, 0x0000003F +EB 0xFE500000, 0x00 + +WAIT 5, 0xFE40009C + +ED 0xFE400084, 0x0000FF0A +EB 0xFE500000, 0x00 + +WAIT 1, 0xFE40009C + +ED 0xFE400084, 0x00002201 +EB 0xFE500000, 0x00 +ED 0xFE400084, 0x00000302 +EB 0xFE500000, 0x00 +EB 0xFE5C0000, 0x00 +ED 0xFE400008, 0xBCC90159 +ED 0xFE40008C, 0x88800004 +ED 0xFE400094, 0x00000004 +ED 0xFE400028, 0xA55A0032 +ED 0xFE40002C, 0xA55A000C +ED 0xFE400020, 0xA55A2048 +ED 0xFE400008, 0xBCC90959 + +LIST "Change CPGA setting" +ED 0xE61500E0, 0x9E40352E +ED 0xE6150004, 0x80331050 + +WAIT 1, 0xFE40009C + +ED 0xE6150354, 0x00000002 diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h new file mode 100644 index 00000000000..3ad86b7708e --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/zboot.h @@ -0,0 +1,20 @@ +#ifndef ZBOOT_H +#define ZBOOT_H + +#include <asm/mach-types.h> +#include <mach/zboot_macros.h> + +/************************************************** + * + * board specific settings + * + **************************************************/ + +#ifdef CONFIG_MACH_AP4EVB +#define MACH_TYPE MACH_TYPE_AP4EVB +#include "mach/head-ap4evb.txt" +#else +#error "unsupported board." +#endif + +#endif /* ZBOOT_H */ diff --git a/arch/arm/mach-shmobile/include/mach/zboot_macros.h b/arch/arm/mach-shmobile/include/mach/zboot_macros.h new file mode 100644 index 00000000000..aa6111fbc98 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/zboot_macros.h @@ -0,0 +1,65 @@ +#ifndef __ZBOOT_MACRO_H +#define __ZBOOT_MACRO_H + +/* The LIST command is used to include comments in the script */ +.macro LIST comment +.endm + +/* The ED command is used to write a 32-bit word */ +.macro ED, addr, data + LDR r0, 1f + LDR r1, 2f + STR r1, [r0] + B 3f +1 : .long \addr +2 : .long \data +3 : +.endm + +/* The EW command is used to write a 16-bit word */ +.macro EW, addr, data + LDR r0, 1f + LDR r1, 2f + STRH r1, [r0] + B 3f +1 : .long \addr +2 : .long \data +3 : +.endm + +/* The EB command is used to write an 8-bit word */ +.macro EB, addr, data + LDR r0, 1f + LDR r1, 2f + STRB r1, [r0] + B 3f +1 : .long \addr +2 : .long \data +3 : +.endm + +/* The WAIT command is used to delay the execution */ +.macro WAIT, time, reg + LDR r1, 1f + LDR r0, 2f + STR r0, [r1] +10 : + LDR r0, [r1] + CMP r0, #0x00000000 + BNE 10b + NOP + B 3f +1 : .long \reg +2 : .long \time * 100 +3 : +.endm + +/* The DD command is used to read a 32-bit word */ +.macro DD, start, end + LDR r1, 1f + B 2f +1 : .long \start +2 : +.endm + +#endif /* __ZBOOT_MACRO_H */ diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S index 2ba9e5c9d2f..dd165c53889 100644 --- a/arch/arm/mach-tegra/include/mach/entry-macro.S +++ b/arch/arm/mach-tegra/include/mach/entry-macro.S @@ -16,8 +16,8 @@ #include <mach/io.h> #if defined(CONFIG_ARM_GIC) - -#include <asm/hardware/gic.h> +#define HAVE_GET_IRQNR_PREAMBLE +#include <asm/hardware/entry-macro-gic.S> /* Uses the GIC interrupt controller built into the cpu */ #define ICTRL_BASE (IO_CPU_VIRT + 0x100) @@ -32,68 +32,6 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt - * if it's between 30 and 1020. The test_for_ipi routine below will - * pick up on IPIs. - * - * A simple read from the controller will tell us the number of the - * highest priority enabled interrupt. We then just need to check - * whether it is in the valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - /* bits 12-10 = src CPU, 9-0 = int # */ - ldr \irqstat, [\base, #GIC_CPU_INTACK] - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm - #else /* legacy interrupt controller for AP16 */ .macro disable_fiq diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h index f0981b1ac59..4cea2230c8d 100644 --- a/arch/arm/mach-tegra/include/mach/io.h +++ b/arch/arm/mach-tegra/include/mach/io.h @@ -65,8 +65,8 @@ #ifndef __ASSEMBLER__ -#define __arch_ioremap(p, s, t) tegra_ioremap(p, s, t) -#define __arch_iounmap(v) tegra_iounmap(v) +#define __arch_ioremap tegra_ioremap +#define __arch_iounmap tegra_iounmap void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type); void tegra_iounmap(volatile void __iomem *addr); diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 50a8dfb9a0c..5407de01abf 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -94,8 +94,8 @@ void __init tegra_init_irq(void) writel(0, ictlr_to_virt(i) + ICTLR_CPU_IEP_CLASS); } - gic_dist_init(0, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), 29); - gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); + gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), + IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); gic = get_irq_chip(29); gic_unmask_irq = gic->unmask; diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 1c0fd92cab3..3b7376c4f35 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -48,7 +48,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x100); + gic_secondary_init(0); /* * Synchronise with the boot thread. diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 608a1372b17..7328c017976 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -61,8 +61,8 @@ void __init ux500_init_devices(void) void __init ux500_init_irq(void) { - gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29); - gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE)); + gic_init(0, 29, __io_address(UX500_GIC_DIST_BASE), + __io_address(UX500_GIC_CPU_BASE)); /* * Init clocks here so that they are available for system timer diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S index 60ea88db828..a37f585a3ec 100644 --- a/arch/arm/mach-ux500/include/mach/entry-macro.S +++ b/arch/arm/mach-ux500/include/mach/entry-macro.S @@ -11,7 +11,8 @@ * warranty of any kind, whether express or implied. */ #include <mach/hardware.h> -#include <asm/hardware/gic.h> +#define HAVE_GET_IRQNR_PREAMBLE +#include <asm/hardware/entry-macro-gic.S> .macro disable_fiq .endm @@ -22,68 +23,3 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an - * interrupt if it's between 30 and 1020. The test_for_ipi - * routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number - * of the highest priority enabled interrupt. We then just - * need to check whether it is in the valid range for an - * IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - /* bits 12-10 = src CPU, 9-0 = int # */ - ldr \irqstat, [\base, #GIC_CPU_INTACK] - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ - * acknowledge register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of - * interrupt on the controller, since this requires the - * original irqstat value which we won't easily be able - * to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base - * are preserved.. - */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 9e4c678de78..b5077b4c419 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -44,7 +44,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE)); + gic_secondary_init(0); /* * let the primary processor know we're out of the diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index e38acb0f89c..6b93bd60027 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -49,7 +49,7 @@ #include <mach/clkdev.h> #include <mach/hardware.h> #include <mach/platform.h> -#include <plat/timer-sp.h> +#include <asm/hardware/timer-sp.h> #include "core.h" diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index 57dd95ce41f..362780d868d 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -22,5 +22,3 @@ struct map_desc; void v2m_map_io(struct map_desc *tile, size_t num); extern struct sys_timer v2m_timer; - -extern void __iomem *gic_cpu_base_addr; diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index fd25ccd7272..cb5793ef3ee 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -21,7 +21,7 @@ #include <mach/clkdev.h> #include <mach/ct-ca9x4.h> -#include <plat/timer-sp.h> +#include <asm/hardware/timer-sp.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -60,13 +60,10 @@ static void __init ct_ca9x4_map_io(void) v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); } -void __iomem *gic_cpu_base_addr; - static void __init ct_ca9x4_init_irq(void) { - gic_cpu_base_addr = MMIO_P2V(A9_MPCORE_GIC_CPU); - gic_dist_init(0, MMIO_P2V(A9_MPCORE_GIC_DIST), 29); - gic_cpu_init(0, gic_cpu_base_addr); + gic_init(0, 29, MMIO_P2V(A9_MPCORE_GIC_DIST), + MMIO_P2V(A9_MPCORE_GIC_CPU)); } #if 0 diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S index 20e9fb514f0..73c11297509 100644 --- a/arch/arm/mach-vexpress/include/mach/entry-macro.S +++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S @@ -1,67 +1,7 @@ -#include <asm/hardware/gic.h> +#include <asm/hardware/entry-macro-gic.S> .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ - ldr \tmp, =1021 - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm - diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 670970699ba..dfb591031d1 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -51,7 +51,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_cpu_init(0, gic_cpu_base_addr); + gic_secondary_init(0); /* * let the primary processor know we're out of the diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 7eaa232180a..91ff2e0df85 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -22,7 +22,7 @@ #include <mach/clkdev.h> #include <mach/motherboard.h> -#include <plat/timer-sp.h> +#include <asm/hardware/timer-sp.h> #include "core.h" diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index 128b549c279..204865f91d9 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -294,8 +294,8 @@ static inline void omap44xx_map_common_io(void) extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); -#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) -#define __arch_iounmap(v) omap_iounmap(v) +#define __arch_ioremap omap_ioremap +#define __arch_iounmap omap_iounmap void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type); void omap_iounmap(volatile void __iomem *addr); diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 5cf88e8427b..aaa571d1792 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,5 +1,4 @@ obj-y := clock.o -obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o ifeq ($(CONFIG_LEDS_CLASS),y) diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 8d9386a22eb..a565300a19c 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -50,8 +50,9 @@ sa1111_cs-$(CONFIG_SA1100_JORNADA720) += sa1100_jornada720.o sa1100_cs-y += sa1100_generic.o sa1100_cs-$(CONFIG_SA1100_ASSABET) += sa1100_assabet.o sa1100_cs-$(CONFIG_SA1100_CERF) += sa1100_cerf.o -sa1100_cs-$(CONFIG_SA1100_COLLIE) += pxa2xx_sharpsl.o +sa1100_cs-$(CONFIG_SA1100_COLLIE) += pxa2xx_sharpsl.o sa1100_cs-$(CONFIG_SA1100_H3600) += sa1100_h3600.o +sa1100_cs-$(CONFIG_SA1100_NANOENGINE) += sa1100_nanoengine.o sa1100_cs-$(CONFIG_SA1100_SHANNON) += sa1100_shannon.o sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index 6b228590b3f..fb9740d3e9a 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -53,6 +53,9 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = { #if defined(CONFIG_SA1100_H3100) || defined(CONFIG_SA1100_H3600) pcmcia_h3600_init, #endif +#ifdef CONFIG_SA1100_NANOENGINE + pcmcia_nanoengine_init, +#endif #ifdef CONFIG_SA1100_SHANNON pcmcia_shannon_init, #endif diff --git a/drivers/pcmcia/sa1100_generic.h b/drivers/pcmcia/sa1100_generic.h index 794f96a35bb..adb08dbc723 100644 --- a/drivers/pcmcia/sa1100_generic.h +++ b/drivers/pcmcia/sa1100_generic.h @@ -13,6 +13,7 @@ extern int pcmcia_freebird_init(struct device *); extern int pcmcia_gcplus_init(struct device *); extern int pcmcia_graphicsmaster_init(struct device *); extern int pcmcia_h3600_init(struct device *); +extern int pcmcia_nanoengine_init(struct device *); extern int pcmcia_pangolin_init(struct device *); extern int pcmcia_pfs168_init(struct device *); extern int pcmcia_shannon_init(struct device *); diff --git a/drivers/pcmcia/sa1100_nanoengine.c b/drivers/pcmcia/sa1100_nanoengine.c new file mode 100644 index 00000000000..3d2652e2f5a --- /dev/null +++ b/drivers/pcmcia/sa1100_nanoengine.c @@ -0,0 +1,219 @@ +/* + * drivers/pcmcia/sa1100_nanoengine.c + * + * PCMCIA implementation routines for BSI nanoEngine. + * + * In order to have a fully functional pcmcia subsystem in a BSE nanoEngine + * board you should carefully read this: + * http://cambuca.ldhs.cetuc.puc-rio.br/nanoengine/ + * + * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> + * + * Based on original work for kernel 2.4 by + * Miguel Freitas <miguel@cpti.cetuc.puc-rio.br> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/signal.h> + +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/nanoengine.h> + +#include "sa1100_generic.h" + +static struct pcmcia_irqs irqs_skt0[] = { + /* socket, IRQ, name */ + { 0, NANOENGINE_IRQ_GPIO_PC_CD0, "PC CD0" }, +}; + +static struct pcmcia_irqs irqs_skt1[] = { + /* socket, IRQ, name */ + { 1, NANOENGINE_IRQ_GPIO_PC_CD1, "PC CD1" }, +}; + +struct nanoengine_pins { + unsigned input_pins; + unsigned output_pins; + unsigned clear_outputs; + unsigned transition_pins; + unsigned pci_irq; + struct pcmcia_irqs *pcmcia_irqs; + unsigned pcmcia_irqs_size; +}; + +static struct nanoengine_pins nano_skts[] = { + { + .input_pins = GPIO_PC_READY0 | GPIO_PC_CD0, + .output_pins = GPIO_PC_RESET0, + .clear_outputs = GPIO_PC_RESET0, + .transition_pins = NANOENGINE_IRQ_GPIO_PC_CD0, + .pci_irq = NANOENGINE_IRQ_GPIO_PC_READY0, + .pcmcia_irqs = irqs_skt0, + .pcmcia_irqs_size = ARRAY_SIZE(irqs_skt0) + }, { + .input_pins = GPIO_PC_READY1 | GPIO_PC_CD1, + .output_pins = GPIO_PC_RESET1, + .clear_outputs = GPIO_PC_RESET1, + .transition_pins = NANOENGINE_IRQ_GPIO_PC_CD1, + .pci_irq = NANOENGINE_IRQ_GPIO_PC_READY1, + .pcmcia_irqs = irqs_skt1, + .pcmcia_irqs_size = ARRAY_SIZE(irqs_skt1) + } +}; + +unsigned num_nano_pcmcia_sockets = ARRAY_SIZE(nano_skts); + +static int nanoengine_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + unsigned i = skt->nr; + + if (i >= num_nano_pcmcia_sockets) + return -ENXIO; + + GPDR &= ~nano_skts[i].input_pins; + GPDR |= nano_skts[i].output_pins; + GPCR = nano_skts[i].clear_outputs; + set_irq_type(nano_skts[i].transition_pins, IRQ_TYPE_EDGE_BOTH); + skt->socket.pci_irq = nano_skts[i].pci_irq; + + return soc_pcmcia_request_irqs(skt, + nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size); +} + +/* + * Release all resources. + */ +static void nanoengine_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + unsigned i = skt->nr; + + if (i >= num_nano_pcmcia_sockets) + return; + + soc_pcmcia_free_irqs(skt, + nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size); +} + +static int nanoengine_pcmcia_configure_socket( + struct soc_pcmcia_socket *skt, const socket_state_t *state) +{ + unsigned reset; + unsigned i = skt->nr; + + if (i >= num_nano_pcmcia_sockets) + return -ENXIO; + + switch (i) { + case 0: + reset = GPIO_PC_RESET0; + break; + case 1: + reset = GPIO_PC_RESET1; + break; + default: + return -ENXIO; + } + + if (state->flags & SS_RESET) + GPSR = reset; + else + GPCR = reset; + + return 0; +} + +static void nanoengine_pcmcia_socket_state( + struct soc_pcmcia_socket *skt, struct pcmcia_state *state) +{ + unsigned long levels = GPLR; + unsigned i = skt->nr; + + if (i >= num_nano_pcmcia_sockets) + return; + + memset(state, 0, sizeof(struct pcmcia_state)); + switch (i) { + case 0: + state->ready = (levels & GPIO_PC_READY0) ? 1 : 0; + state->detect = !(levels & GPIO_PC_CD0) ? 1 : 0; + break; + case 1: + state->ready = (levels & GPIO_PC_READY1) ? 1 : 0; + state->detect = !(levels & GPIO_PC_CD1) ? 1 : 0; + break; + default: + return; + } + state->bvd1 = 1; + state->bvd2 = 1; + state->wrprot = 0; /* Not available */ + state->vs_3v = 1; /* Can only apply 3.3V */ + state->vs_Xv = 0; +} + +/* + * Enable card status IRQs on (re-)initialisation. This can + * be called at initialisation, power management event, or + * pcmcia event. + */ +static void nanoengine_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ + unsigned i = skt->nr; + + if (i >= num_nano_pcmcia_sockets) + return; + + soc_pcmcia_enable_irqs(skt, + nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size); +} + +/* + * Disable card status IRQs on suspend. + */ +static void nanoengine_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ + unsigned i = skt->nr; + + if (i >= num_nano_pcmcia_sockets) + return; + + soc_pcmcia_disable_irqs(skt, + nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size); +} + +static struct pcmcia_low_level nanoengine_pcmcia_ops = { + .owner = THIS_MODULE, + + .hw_init = nanoengine_pcmcia_hw_init, + .hw_shutdown = nanoengine_pcmcia_hw_shutdown, + + .configure_socket = nanoengine_pcmcia_configure_socket, + .socket_state = nanoengine_pcmcia_socket_state, + .socket_init = nanoengine_pcmcia_socket_init, + .socket_suspend = nanoengine_pcmcia_socket_suspend, +}; + +int pcmcia_nanoengine_init(struct device *dev) +{ + int ret = -ENODEV; + + if (machine_is_nanoengine()) + ret = sa11xx_drv_pcmcia_probe( + dev, &nanoengine_pcmcia_ops, 0, 2); + + return ret; +} + diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 2fe8cb8e95c..5a9a392eacd 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -31,20 +31,20 @@ ======================================================================*/ -#include <linux/module.h> -#include <linux/moduleparam.h> +#include <linux/cpufreq.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> #include <linux/kernel.h> -#include <linux/timer.h> #include <linux/mm.h> +#include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/mutex.h> -#include <linux/interrupt.h> -#include <linux/irq.h> #include <linux/spinlock.h> -#include <linux/cpufreq.h> +#include <linux/timer.h> #include <mach/hardware.h> -#include <asm/io.h> #include <asm/system.h> #include "soc_common.h" @@ -74,7 +74,8 @@ EXPORT_SYMBOL(soc_pcmcia_debug); #endif -#define to_soc_pcmcia_socket(x) container_of(x, struct soc_pcmcia_socket, socket) +#define to_soc_pcmcia_socket(x) \ + container_of(x, struct soc_pcmcia_socket, socket) static unsigned short calc_speed(unsigned short *spds, int num, unsigned short dflt) @@ -91,11 +92,15 @@ calc_speed(unsigned short *spds, int num, unsigned short dflt) return speed; } -void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *skt, struct soc_pcmcia_timing *timing) +void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *skt, + struct soc_pcmcia_timing *timing) { - timing->io = calc_speed(skt->spd_io, MAX_IO_WIN, SOC_PCMCIA_IO_ACCESS); - timing->mem = calc_speed(skt->spd_mem, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS); - timing->attr = calc_speed(skt->spd_attr, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS); + timing->io = + calc_speed(skt->spd_io, MAX_IO_WIN, SOC_PCMCIA_IO_ACCESS); + timing->mem = + calc_speed(skt->spd_mem, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS); + timing->attr = + calc_speed(skt->spd_attr, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS); } EXPORT_SYMBOL(soc_common_pcmcia_get_timing); @@ -137,8 +142,8 @@ static unsigned int soc_common_pcmcia_skt_state(struct soc_pcmcia_socket *skt) * * Convert PCMCIA socket state to our socket configure structure. */ -static int -soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *state) +static int soc_common_pcmcia_config_skt( + struct soc_pcmcia_socket *skt, socket_state_t *state) { int ret; @@ -150,7 +155,8 @@ soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *stat */ if (skt->irq_state != 1 && state->io_irq) { skt->irq_state = 1; - set_irq_type(skt->socket.pci_irq, IRQ_TYPE_EDGE_FALLING); + set_irq_type(skt->socket.pci_irq, + IRQ_TYPE_EDGE_FALLING); } else if (skt->irq_state == 1 && state->io_irq == 0) { skt->irq_state = 0; set_irq_type(skt->socket.pci_irq, IRQ_TYPE_NONE); @@ -304,24 +310,24 @@ soc_common_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status) * of power configuration, reset, &c. We also record the value of * `state' in order to regurgitate it to the PCMCIA core later. */ -static int -soc_common_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state) +static int soc_common_pcmcia_set_socket( + struct pcmcia_socket *sock, socket_state_t *state) { struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); - debug(skt, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n", - (state->csc_mask==0)?"<NONE> ":"", - (state->csc_mask&SS_DETECT)?"DETECT ":"", - (state->csc_mask&SS_READY)?"READY ":"", - (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"", - (state->csc_mask&SS_BATWARN)?"BATWARN ":"", - (state->csc_mask&SS_STSCHG)?"STSCHG ":"", - (state->flags==0)?"<NONE> ":"", - (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"", - (state->flags&SS_IOCARD)?"IOCARD ":"", - (state->flags&SS_RESET)?"RESET ":"", - (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"", - (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"", + debug(skt, 2, "mask: %s%s%s%s%s%s flags: %s%s%s%s%s%s Vcc %d Vpp %d irq %d\n", + (state->csc_mask == 0) ? "<NONE> " : "", + (state->csc_mask & SS_DETECT) ? "DETECT " : "", + (state->csc_mask & SS_READY) ? "READY " : "", + (state->csc_mask & SS_BATDEAD) ? "BATDEAD " : "", + (state->csc_mask & SS_BATWARN) ? "BATWARN " : "", + (state->csc_mask & SS_STSCHG) ? "STSCHG " : "", + (state->flags == 0) ? "<NONE> " : "", + (state->flags & SS_PWR_AUTO) ? "PWR_AUTO " : "", + (state->flags & SS_IOCARD) ? "IOCARD " : "", + (state->flags & SS_RESET) ? "RESET " : "", + (state->flags & SS_SPKR_ENA) ? "SPKR_ENA " : "", + (state->flags & SS_OUTPUT_ENA) ? "OUTPUT_ENA " : "", state->Vcc, state->Vpp, state->io_irq); return soc_common_pcmcia_config_skt(skt, state); @@ -336,8 +342,8 @@ soc_common_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state) * * Returns: 0 on success, -1 on error */ -static int -soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map) +static int soc_common_pcmcia_set_io_map( + struct pcmcia_socket *sock, struct pccard_io_map *map) { struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); unsigned short speed = map->speed; @@ -346,14 +352,14 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m map->map, map->speed, (unsigned long long)map->start, (unsigned long long)map->stop); debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n", - (map->flags==0)?"<NONE>":"", - (map->flags&MAP_ACTIVE)?"ACTIVE ":"", - (map->flags&MAP_16BIT)?"16BIT ":"", - (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"", - (map->flags&MAP_0WS)?"0WS ":"", - (map->flags&MAP_WRPROT)?"WRPROT ":"", - (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"", - (map->flags&MAP_PREFETCH)?"PREFETCH ":""); + (map->flags == 0) ? "<NONE>" : "", + (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", + (map->flags & MAP_16BIT) ? "16BIT " : "", + (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", + (map->flags & MAP_0WS) ? "0WS " : "", + (map->flags & MAP_WRPROT) ? "WRPROT " : "", + (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "", + (map->flags & MAP_PREFETCH) ? "PREFETCH " : ""); if (map->map >= MAX_IO_WIN) { printk(KERN_ERR "%s(): map (%d) out of range\n", __func__, @@ -390,8 +396,8 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m * * Returns: 0 on success, -ERRNO on error */ -static int -soc_common_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map) +static int soc_common_pcmcia_set_mem_map( + struct pcmcia_socket *sock, struct pccard_mem_map *map) { struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); struct resource *res; @@ -400,14 +406,14 @@ soc_common_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map debug(skt, 2, "map %u speed %u card_start %08x\n", map->map, map->speed, map->card_start); debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n", - (map->flags==0)?"<NONE>":"", - (map->flags&MAP_ACTIVE)?"ACTIVE ":"", - (map->flags&MAP_16BIT)?"16BIT ":"", - (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"", - (map->flags&MAP_0WS)?"0WS ":"", - (map->flags&MAP_WRPROT)?"WRPROT ":"", - (map->flags&MAP_ATTRIB)?"ATTRIB ":"", - (map->flags&MAP_USE_WAIT)?"USE_WAIT ":""); + (map->flags == 0) ? "<NONE>" : "", + (map->flags & MAP_ACTIVE) ? "ACTIVE " : "", + (map->flags & MAP_16BIT) ? "16BIT " : "", + (map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "", + (map->flags & MAP_0WS) ? "0WS " : "", + (map->flags & MAP_WRPROT) ? "WRPROT " : "", + (map->flags & MAP_ATTRIB) ? "ATTRIB " : "", + (map->flags & MAP_USE_WAIT) ? "USE_WAIT " : ""); if (map->map >= MAX_WIN) return -EINVAL; @@ -462,8 +468,8 @@ static struct bittbl conf_bits[] = { { SS_OUTPUT_ENA, "SS_OUTPUT_ENA" }, }; -static void -dump_bits(char **p, const char *prefix, unsigned int val, struct bittbl *bits, int sz) +static void dump_bits(char **p, const char *prefix, + unsigned int val, struct bittbl *bits, int sz) { char *b = *p; int i; @@ -481,13 +487,14 @@ dump_bits(char **p, const char *prefix, unsigned int val, struct bittbl *bits, i * * Returns: the number of characters added to the buffer */ -static ssize_t show_status(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_status( + struct device *dev, struct device_attribute *attr, char *buf) { struct soc_pcmcia_socket *skt = container_of(dev, struct soc_pcmcia_socket, socket.dev); char *p = buf; - p+=sprintf(p, "slot : %d\n", skt->nr); + p += sprintf(p, "slot : %d\n", skt->nr); dump_bits(&p, "status", skt->status, status_bits, ARRAY_SIZE(status_bits)); @@ -496,12 +503,12 @@ static ssize_t show_status(struct device *dev, struct device_attribute *attr, ch dump_bits(&p, "cs_flags", skt->cs_state.flags, conf_bits, ARRAY_SIZE(conf_bits)); - p+=sprintf(p, "Vcc : %d\n", skt->cs_state.Vcc); - p+=sprintf(p, "Vpp : %d\n", skt->cs_state.Vpp); - p+=sprintf(p, "IRQ : %d (%d)\n", skt->cs_state.io_irq, + p += sprintf(p, "Vcc : %d\n", skt->cs_state.Vcc); + p += sprintf(p, "Vpp : %d\n", skt->cs_state.Vpp); + p += sprintf(p, "IRQ : %d (%d)\n", skt->cs_state.io_irq, skt->socket.pci_irq); if (skt->ops->show_timing) - p+=skt->ops->show_timing(skt, p); + p += skt->ops->show_timing(skt, p); return p-buf; } @@ -594,7 +601,7 @@ soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data) mutex_lock(&soc_pcmcia_sockets_lock); list_for_each_entry(skt, &soc_pcmcia_sockets, node) - if ( skt->ops->frequency_change ) + if (skt->ops->frequency_change) ret += skt->ops->frequency_change(skt, val, freqs); mutex_unlock(&soc_pcmcia_sockets_lock); @@ -620,7 +627,8 @@ fs_initcall(soc_pcmcia_cpufreq_register); static void soc_pcmcia_cpufreq_unregister(void) { - cpufreq_unregister_notifier(&soc_pcmcia_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); + cpufreq_unregister_notifier(&soc_pcmcia_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); } module_exit(soc_pcmcia_cpufreq_unregister); diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index e4a44b64170..88ea52b8647 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -39,10 +39,10 @@ #include <mach/regs-ost.h> #endif -#define RTC_DEF_DIVIDER 32768 - 1 +#define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 -static unsigned long rtc_freq = 1024; +static const unsigned long RTC_FREQ = 1024; static unsigned long timer_freq; static struct rtc_time rtc_alarm; static DEFINE_SPINLOCK(sa1100_rtc_lock); @@ -61,7 +61,8 @@ static inline int rtc_periodic_alarm(struct rtc_time *tm) * Calculate the next alarm time given the requested alarm time mask * and the current time. */ -static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm) +static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, + struct rtc_time *alrm) { unsigned long next_time; unsigned long now_time; @@ -116,7 +117,23 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) rtsr = RTSR; /* clear interrupt sources */ RTSR = 0; - RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2); + /* Fix for a nasty initialization problem the in SA11xx RTSR register. + * See also the comments in sa1100_rtc_probe(). */ + if (rtsr & (RTSR_ALE | RTSR_HZE)) { + /* This is the original code, before there was the if test + * above. This code does not clear interrupts that were not + * enabled. */ + RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2); + } else { + /* For some reason, it is possible to enter this routine + * without interruptions enabled, it has been tested with + * several units (Bug in SA11xx chip?). + * + * This situation leads to an infinite "loop" of interrupt + * routine calling and as a result the processor seems to + * lock on its first call to open(). */ + RTSR = RTSR_AL | RTSR_HZ; + } /* clear alarm interrupt if it has occurred */ if (rtsr & RTSR_AL) @@ -139,8 +156,58 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static int sa1100_irq_set_freq(struct device *dev, int freq) +{ + if (freq < 1 || freq > timer_freq) { + return -EINVAL; + } else { + struct rtc_device *rtc = (struct rtc_device *)dev; + + rtc->irq_freq = freq; + + return 0; + } +} + static int rtc_timer1_count; +static int sa1100_irq_set_state(struct device *dev, int enabled) +{ + spin_lock_irq(&sa1100_rtc_lock); + if (enabled) { + struct rtc_device *rtc = (struct rtc_device *)dev; + + OSMR1 = timer_freq / rtc->irq_freq + OSCR; + OIER |= OIER_E1; + rtc_timer1_count = 1; + } else { + OIER &= ~OIER_E1; + } + spin_unlock_irq(&sa1100_rtc_lock); + + return 0; +} + +static inline int sa1100_timer1_retrigger(struct rtc_device *rtc) +{ + unsigned long diff; + unsigned long period = timer_freq / rtc->irq_freq; + + spin_lock_irq(&sa1100_rtc_lock); + + do { + OSMR1 += period; + diff = OSMR1 - OSCR; + /* If OSCR > OSMR1, diff is a very large number (unsigned + * math). This means we have a lost interrupt. */ + } while (diff > period); + OIER |= OIER_E1; + + spin_unlock_irq(&sa1100_rtc_lock); + + return 0; +} + static irqreturn_t timer1_interrupt(int irq, void *dev_id) { struct platform_device *pdev = to_platform_device(dev_id); @@ -158,7 +225,11 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id) rtc_update_irq(rtc, rtc_timer1_count, RTC_PF | RTC_IRQF); if (rtc_timer1_count == 1) - rtc_timer1_count = (rtc_freq * ((1 << 30) / (timer_freq >> 2))); + rtc_timer1_count = + (rtc->irq_freq * ((1 << 30) / (timer_freq >> 2))); + + /* retrigger. */ + sa1100_timer1_retrigger(rtc); return IRQ_HANDLED; } @@ -166,8 +237,10 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id) static int sa1100_rtc_read_callback(struct device *dev, int data) { if (data & RTC_PF) { + struct rtc_device *rtc = (struct rtc_device *)dev; + /* interpolate missed periods and set match for the next */ - unsigned long period = timer_freq / rtc_freq; + unsigned long period = timer_freq / rtc->irq_freq; unsigned long oscr = OSCR; unsigned long osmr1 = OSMR1; unsigned long missed = (oscr - osmr1)/period; @@ -178,7 +251,7 @@ static int sa1100_rtc_read_callback(struct device *dev, int data) * Here we compare (match - OSCR) 8 instead of 0 -- * see comment in pxa_timer_interrupt() for explanation. */ - while( (signed long)((osmr1 = OSMR1) - OSCR) <= 8 ) { + while ((signed long)((osmr1 = OSMR1) - OSCR) <= 8) { data += 0x100; OSSR = OSSR_M1; /* clear match on timer 1 */ OSMR1 = osmr1 + period; @@ -190,25 +263,29 @@ static int sa1100_rtc_read_callback(struct device *dev, int data) static int sa1100_rtc_open(struct device *dev) { int ret; + struct rtc_device *rtc = (struct rtc_device *)dev; ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED, - "rtc 1Hz", dev); + "rtc 1Hz", dev); if (ret) { dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz); goto fail_ui; } ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED, - "rtc Alrm", dev); + "rtc Alrm", dev); if (ret) { dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm); goto fail_ai; } ret = request_irq(IRQ_OST1, timer1_interrupt, IRQF_DISABLED, - "rtc timer", dev); + "rtc timer", dev); if (ret) { dev_err(dev, "IRQ %d already in use.\n", IRQ_OST1); goto fail_pi; } + rtc->max_user_freq = RTC_FREQ; + sa1100_irq_set_freq(dev, RTC_FREQ); + return 0; fail_pi: @@ -236,7 +313,7 @@ static void sa1100_rtc_release(struct device *dev) static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { - switch(cmd) { + switch (cmd) { case RTC_AIE_OFF: spin_lock_irq(&sa1100_rtc_lock); RTSR &= ~RTSR_ALE; @@ -257,25 +334,6 @@ static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd, RTSR |= RTSR_HZE; spin_unlock_irq(&sa1100_rtc_lock); return 0; - case RTC_PIE_OFF: - spin_lock_irq(&sa1100_rtc_lock); - OIER &= ~OIER_E1; - spin_unlock_irq(&sa1100_rtc_lock); - return 0; - case RTC_PIE_ON: - spin_lock_irq(&sa1100_rtc_lock); - OSMR1 = timer_freq / rtc_freq + OSCR; - OIER |= OIER_E1; - rtc_timer1_count = 1; - spin_unlock_irq(&sa1100_rtc_lock); - return 0; - case RTC_IRQP_READ: - return put_user(rtc_freq, (unsigned long *)arg); - case RTC_IRQP_SET: - if (arg < 1 || arg > timer_freq) - return -EINVAL; - rtc_freq = arg; - return 0; } return -ENOIOCTLCMD; } @@ -327,12 +385,15 @@ static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq) { + struct rtc_device *rtc = (struct rtc_device *)dev; + seq_printf(seq, "trim/divider\t: 0x%08x\n", (u32) RTTR); seq_printf(seq, "update_IRQ\t: %s\n", (RTSR & RTSR_HZE) ? "yes" : "no"); seq_printf(seq, "periodic_IRQ\t: %s\n", (OIER & OIER_E1) ? "yes" : "no"); - seq_printf(seq, "periodic_freq\t: %ld\n", rtc_freq); + seq_printf(seq, "periodic_freq\t: %d\n", rtc->irq_freq); + seq_printf(seq, "RTSR\t\t: 0x%08x\n", (u32)RTSR); return 0; } @@ -347,6 +408,8 @@ static const struct rtc_class_ops sa1100_rtc_ops = { .read_alarm = sa1100_rtc_read_alarm, .set_alarm = sa1100_rtc_set_alarm, .proc = sa1100_rtc_proc, + .irq_set_freq = sa1100_irq_set_freq, + .irq_set_state = sa1100_irq_set_state, }; static int sa1100_rtc_probe(struct platform_device *pdev) @@ -364,7 +427,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev) */ if (RTTR == 0) { RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); - dev_warn(&pdev->dev, "warning: initializing default clock divider/trim value\n"); + dev_warn(&pdev->dev, "warning: " + "initializing default clock divider/trim value\n"); /* The current RTC value probably doesn't make sense either */ RCNR = 0; } @@ -372,13 +436,42 @@ static int sa1100_rtc_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 1); rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops, - THIS_MODULE); + THIS_MODULE); if (IS_ERR(rtc)) return PTR_ERR(rtc); platform_set_drvdata(pdev, rtc); + /* Set the irq_freq */ + /*TODO: Find out who is messing with this value after we initialize + * it here.*/ + rtc->irq_freq = RTC_FREQ; + + /* Fix for a nasty initialization problem the in SA11xx RTSR register. + * See also the comments in sa1100_rtc_interrupt(). + * + * Sometimes bit 1 of the RTSR (RTSR_HZ) will wake up 1, which means an + * interrupt pending, even though interrupts were never enabled. + * In this case, this bit it must be reset before enabling + * interruptions to avoid a nonexistent interrupt to occur. + * + * In principle, the same problem would apply to bit 0, although it has + * never been observed to happen. + * + * This issue is addressed both here and in sa1100_rtc_interrupt(). + * If the issue is not addressed here, in the times when the processor + * wakes up with the bit set there will be one spurious interrupt. + * + * The issue is also dealt with in sa1100_rtc_interrupt() to be on the + * safe side, once the condition that lead to this strange + * initialization is unknown and could in principle happen during + * normal processing. + * + * Notice that clearing bit 1 and 0 is accomplished by writting ONES to + * the corresponding bits in RTSR. */ + RTSR = RTSR_AL | RTSR_HZ; + return 0; } @@ -386,7 +479,7 @@ static int sa1100_rtc_remove(struct platform_device *pdev) { struct rtc_device *rtc = platform_get_drvdata(pdev); - if (rtc) + if (rtc) rtc_device_unregister(rtc); return 0; diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c index 2367fb3f70b..74802bc5ded 100644 --- a/fs/proc/vmcore.c +++ b/fs/proc/vmcore.c @@ -499,7 +499,7 @@ static int __init parse_crash_elf64_headers(void) /* Do some basic Verification. */ if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0 || (ehdr.e_type != ET_CORE) || - !vmcore_elf_check_arch(&ehdr) || + !vmcore_elf64_check_arch(&ehdr) || ehdr.e_ident[EI_CLASS] != ELFCLASS64 || ehdr.e_ident[EI_VERSION] != EV_CURRENT || ehdr.e_version != EV_CURRENT || diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h index 0026f267da2..088cd4ace4e 100644 --- a/include/linux/crash_dump.h +++ b/include/linux/crash_dump.h @@ -20,7 +20,14 @@ extern ssize_t copy_oldmem_page(unsigned long, char *, size_t, #define vmcore_elf_check_arch_cross(x) 0 #endif -#define vmcore_elf_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x)) +/* + * Architecture code can redefine this if there are any special checks + * needed for 64-bit ELF vmcores. In case of 32-bit only architecture, + * this can be set to zero. + */ +#ifndef vmcore_elf64_check_arch +#define vmcore_elf64_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x)) +#endif /* * is_kdump_kernel() checks whether this kernel is booting after a panic of diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c index f2f32eee2c5..038b3d1e298 100644 --- a/scripts/recordmcount.c +++ b/scripts/recordmcount.c @@ -38,6 +38,7 @@ static void *ehdr_curr; /* current ElfXX_Ehdr * for resource cleanup */ static char gpfx; /* prefix for global symbol name (sometimes '_') */ static struct stat sb; /* Remember .st_size, etc. */ static jmp_buf jmpenv; /* setjmp/longjmp per-file error escape */ +static const char *altmcount; /* alternate mcount symbol name */ /* setjmp() return values */ enum { @@ -299,7 +300,9 @@ do_file(char const *const fname) fail_file(); } break; case EM_386: reltype = R_386_32; break; - case EM_ARM: reltype = R_ARM_ABS32; break; + case EM_ARM: reltype = R_ARM_ABS32; + altmcount = "__gnu_mcount_nc"; + break; case EM_IA_64: reltype = R_IA64_IMM64; gpfx = '_'; break; case EM_MIPS: /* reltype: e_class */ gpfx = '_'; break; case EM_PPC: reltype = R_PPC_ADDR32; gpfx = '_'; break; @@ -357,7 +360,7 @@ do_file(char const *const fname) int main(int argc, char const *argv[]) { - const char ftrace[] = "kernel/trace/ftrace.o"; + const char ftrace[] = "/ftrace.o"; int ftrace_size = sizeof(ftrace) - 1; int n_error = 0; /* gcc-4.3.0 false positive complaint */ diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h index 39667174971..baf187bee98 100644 --- a/scripts/recordmcount.h +++ b/scripts/recordmcount.h @@ -275,11 +275,12 @@ static uint_t *sift_rel_mcount(uint_t *mlocp, Elf_Sym const *const symp = &sym0[Elf_r_sym(relp)]; char const *symname = &str0[w(symp->st_name)]; + char const *mcount = '_' == gpfx ? "_mcount" : "mcount"; if ('.' == symname[0]) ++symname; /* ppc64 hack */ - if (0 == strcmp((('_' == gpfx) ? "_mcount" : "mcount"), - symname)) + if (0 == strcmp(mcount, symname) || + (altmcount && 0 == strcmp(altmcount, symname))) mcountsym = Elf_r_sym(relp); } |