diff options
| -rw-r--r-- | Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt | 16 | ||||
| -rw-r--r-- | drivers/tty/serial/mxs-auart.c | 52 |
2 files changed, 11 insertions, 57 deletions
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt index 273a8d5b330..2c00ec64628 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt +++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt @@ -5,20 +5,18 @@ Required properties: imx23 and imx28. - reg : Address and length of the register set for the device - interrupts : Should contain the auart interrupt numbers - -Optional properties: -- fsl,auart-dma-channel : The DMA channels, the first is for RX, the other - is for TX. If you add this property, it also means that you - will enable the DMA support for the auart. - Note: due to the hardware bug in imx23(see errata : 2836), - only the imx28 can enable the DMA support for the auart. +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and AUART DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: "rx" for RX channel, "tx" for TX channel. Example: auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; - interrupts = <112 70 71>; - fsl,auart-dma-channel = <8 9>; + interrupts = <112>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; }; Note: Each auart port should have an alias correctly numbered in "aliases" diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index d549fe1fa42..269a27caff3 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -35,7 +35,7 @@ #include <linux/pinctrl/consumer.h> #include <linux/of_device.h> #include <linux/dma-mapping.h> -#include <linux/fsl/mxs-dma.h> +#include <linux/dmaengine.h> #include <asm/cacheflush.h> @@ -148,11 +148,6 @@ struct mxs_auart_port { struct device *dev; /* for DMA */ - struct mxs_dma_data dma_data; - int dma_channel_rx, dma_channel_tx; - int dma_irq_rx, dma_irq_tx; - int dma_channel; - struct scatterlist tx_sgl; struct dma_chan *tx_dma_chan; void *tx_dma_buf; @@ -440,20 +435,6 @@ static u32 mxs_auart_get_mctrl(struct uart_port *u) return mctrl; } -static bool mxs_auart_dma_filter(struct dma_chan *chan, void *param) -{ - struct mxs_auart_port *s = param; - - if (!mxs_dma_is_apbx(chan)) - return false; - - if (s->dma_channel == chan->chan_id) { - chan->private = &s->dma_data; - return true; - } - return false; -} - static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s); static void dma_rx_callback(void *arg) { @@ -545,21 +526,11 @@ static void mxs_auart_dma_exit(struct mxs_auart_port *s) static int mxs_auart_dma_init(struct mxs_auart_port *s) { - dma_cap_mask_t mask; - if (auart_dma_enabled(s)) return 0; - /* We do not get the right DMA channels. */ - if (s->dma_channel_rx == -1 || s->dma_channel_tx == -1) - return -EINVAL; - /* init for RX */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - s->dma_channel = s->dma_channel_rx; - s->dma_data.chan_irq = s->dma_irq_rx; - s->rx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s); + s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx"); if (!s->rx_dma_chan) goto err_out; s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); @@ -567,9 +538,7 @@ static int mxs_auart_dma_init(struct mxs_auart_port *s) goto err_out; /* init for TX */ - s->dma_channel = s->dma_channel_tx; - s->dma_data.chan_irq = s->dma_irq_tx; - s->tx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s); + s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx"); if (!s->tx_dma_chan) goto err_out; s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA); @@ -1020,7 +989,6 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - u32 dma_channel[2]; int ret; if (!np) @@ -1034,20 +1002,8 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s, } s->port.line = ret; - s->dma_irq_rx = platform_get_irq(pdev, 1); - s->dma_irq_tx = platform_get_irq(pdev, 2); + s->flags |= MXS_AUART_DMA_CONFIG; - ret = of_property_read_u32_array(np, "fsl,auart-dma-channel", - dma_channel, 2); - if (ret == 0) { - s->dma_channel_rx = dma_channel[0]; - s->dma_channel_tx = dma_channel[1]; - - s->flags |= MXS_AUART_DMA_CONFIG; - } else { - s->dma_channel_rx = -1; - s->dma_channel_tx = -1; - } return 0; } |