diff options
53 files changed, 4835 insertions, 85 deletions
diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt new file mode 100644 index 00000000000..92d36e2aa87 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cci.txt @@ -0,0 +1,172 @@ +======================================================= +ARM CCI cache coherent interconnect binding description +======================================================= + +ARM multi-cluster systems maintain intra-cluster coherency through a +cache coherent interconnect (CCI) that is capable of monitoring bus +transactions and manage coherency, TLB invalidations and memory barriers. + +It allows snooping and distributed virtual memory message broadcast across +clusters, through memory mapped interface, with a global control register +space and multiple sets of interface control registers, one per slave +interface. + +Bindings for the CCI node follow the ePAPR standard, available from: + +www.power.org/documentation/epapr-version-1-1/ + +with the addition of the bindings described in this document which are +specific to ARM. + +* CCI interconnect node + + Description: Describes a CCI cache coherent Interconnect component + + Node name must be "cci". + Node's parent must be the root node /, and the address space visible + through the CCI interconnect is the same as the one seen from the + root node (ie from CPUs perspective as per DT standard). + Every CCI node has to define the following properties: + + - compatible + Usage: required + Value type: <string> + Definition: must be set to + "arm,cci-400" + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies base physical + address of CCI control registers common to all + interfaces. + + - ranges: + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Follow rules in the ePAPR for + hierarchical bus addressing. CCI interfaces + addresses refer to the parent node addressing + scheme to declare their register bases. + + CCI interconnect node can define the following child nodes: + + - CCI control interface nodes + + Node name must be "slave-if". + Parent node must be CCI interconnect node. + + A CCI control interface node must contain the following + properties: + + - compatible + Usage: required + Value type: <string> + Definition: must be set to + "arm,cci-400-ctrl-if" + + - interface-type: + Usage: required + Value type: <string> + Definition: must be set to one of {"ace", "ace-lite"} + depending on the interface type the node + represents. + + - reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the + corresponding interface programming + registers. + +* CCI interconnect bus masters + + Description: masters in the device tree connected to a CCI port + (inclusive of CPUs and their cpu nodes). + + A CCI interconnect bus master node must contain the following + properties: + + - cci-control-port: + Usage: required + Value type: <phandle> + Definition: a phandle containing the CCI control interface node + the master is connected to. + +Example: + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + cci-control-port = <&cci_control1>; + reg = <0x0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + cci-control-port = <&cci_control1>; + reg = <0x1>; + }; + + CPU2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + cci-control-port = <&cci_control2>; + reg = <0x100>; + }; + + CPU3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + cci-control-port = <&cci_control2>; + reg = <0x101>; + }; + + }; + + dma0: dma@3000000 { + compatible = "arm,pl330", "arm,primecell"; + cci-control-port = <&cci_control0>; + reg = <0x0 0x3000000 0x0 0x1000>; + interrupts = <10>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + cci@2c090000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x2c090000 0 0x1000>; + ranges = <0x0 0x0 0x2c090000 0x6000>; + + cci_control0: slave-if@1000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace-lite"; + reg = <0x1000 0x1000>; + }; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + +This CCI node corresponds to a CCI component whose control registers sits +at address 0x000000002c090000. +CCI slave interface @0x000000002c091000 is connected to dma controller dma0. +CCI slave interface @0x000000002c094000 is connected to CPUs {CPU0, CPU1}; +CCI slave interface @0x000000002c095000 is connected to CPUs {CPU2, CPU3}; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 136f263ed47..c24b364bb8c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1521,6 +1521,13 @@ config MCPM for (multi-)cluster based systems, such as big.LITTLE based systems. +config BIG_LITTLE + bool "big.LITTLE support (Experimental)" + depends on CPU_V7 && SMP + select MCPM + help + This option enables support for the big.LITTLE architecture. + choice prompt "Memory split" default VMSPLIT_3G diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f0895c581a8..00baf9f5766 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -202,7 +202,14 @@ dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ - vexpress-v2p-ca15_a7.dtb + vexpress-v2p-ca15_a7.dtb \ + rtsm_ve-cortex_a9x2.dtb \ + rtsm_ve-cortex_a9x4.dtb \ + rtsm_ve-cortex_a15x1.dtb \ + rtsm_ve-cortex_a15x2.dtb \ + rtsm_ve-cortex_a15x4.dtb \ + rtsm_ve-v2p-ca15x1-ca7x1.dtb \ + rtsm_ve-v2p-ca15x4-ca7x4.dtb dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ diff --git a/arch/arm/boot/dts/clcd-panels.dtsi b/arch/arm/boot/dts/clcd-panels.dtsi new file mode 100644 index 00000000000..0b0ff6ead4b --- /dev/null +++ b/arch/arm/boot/dts/clcd-panels.dtsi @@ -0,0 +1,52 @@ +/* + * ARM Ltd. Versatile Express + * + */ + +/ { + panels { + panel@0 { + compatible = "panel"; + mode = "VGA"; + refresh = <60>; + xres = <640>; + yres = <480>; + pixclock = <39721>; + left_margin = <40>; + right_margin = <24>; + upper_margin = <32>; + lower_margin = <11>; + hsync_len = <96>; + vsync_len = <2>; + sync = <0>; + vmode = "FB_VMODE_NONINTERLACED"; + + tim2 = "TIM2_BCD", "TIM2_IPC"; + cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)"; + caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888"; + bpp = <16>; + }; + + panel@1 { + compatible = "panel"; + mode = "XVGA"; + refresh = <60>; + xres = <1024>; + yres = <768>; + pixclock = <15748>; + left_margin = <152>; + right_margin = <48>; + upper_margin = <23>; + lower_margin = <3>; + hsync_len = <104>; + vsync_len = <4>; + sync = <0>; + vmode = "FB_VMODE_NONINTERLACED"; + + tim2 = "TIM2_BCD", "TIM2_IPC"; + cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)"; + caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888"; + bpp = <16>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a15x1.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a15x1.dts new file mode 100644 index 00000000000..c9eee916aa7 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a15x1.dts @@ -0,0 +1,159 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x1CT + * + * RTSM_VE_Cortex_A15x1.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA15x1"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x1", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a15x2.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a15x2.dts new file mode 100644 index 00000000000..853a166e3c3 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a15x2.dts @@ -0,0 +1,165 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x2CT + * + * RTSM_VE_Cortex_A15x2.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA15x2"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x2", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a15x4.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a15x4.dts new file mode 100644 index 00000000000..c1947a3a5c8 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a15x4.dts @@ -0,0 +1,177 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x4CT + * + * RTSM_VE_Cortex_A15x4.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA15x4"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x4", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a9x2.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a9x2.dts new file mode 100644 index 00000000000..fca6b2f7967 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a9x2.dts @@ -0,0 +1,171 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA9MPx2CT + * + * RTSM_VE_Cortex_A9x2.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA9x2"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a9x2", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + scu@2c000000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x2c000000 0x58>; + }; + + timer@2c000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x2c000600 0x20>; + interrupts = <1 13 0xf04>; + }; + + watchdog@2c000620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x2c000620 0x20>; + interrupts = <1 14 0xf04>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c000100 0x100>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x04000000>, + <1 0 0x14000000 0x04000000>, + <2 0 0x18000000 0x04000000>, + <3 0 0x1c000000 0x04000000>, + <4 0 0x0c000000 0x04000000>, + <5 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a9x4.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a9x4.dts new file mode 100644 index 00000000000..fd8a6ed97a0 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a9x4.dts @@ -0,0 +1,183 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA9MPx4CT + * + * RTSM_VE_Cortex_A9x4.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA9x4"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a9x4", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + scu@2c000000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x2c000000 0x58>; + }; + + timer@2c000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x2c000600 0x20>; + interrupts = <1 13 0xf04>; + }; + + watchdog@2c000620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x2c000620 0x20>; + interrupts = <1 14 0xf04>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c000100 0x100>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x04000000>, + <1 0 0x14000000 0x04000000>, + <2 0 0x18000000 0x04000000>, + <3 0 0x1c000000 0x04000000>, + <4 0 0x0c000000 0x04000000>, + <5 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm/boot/dts/rtsm_ve-motherboard.dtsi new file mode 100644 index 00000000000..6d125662612 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-motherboard.dtsi @@ -0,0 +1,224 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * Motherboard component + * + * VEMotherBoard.lisa + */ + + motherboard { + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + arm,hbi = <0x190>; + arm,vexpress,site = <0>; + arm,v2m-memory-map = "rs1"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; + }; + + vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; + }; + + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_sysctl: sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + }; + + aaci@040000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; + }; + + mmci@050000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "mclk", "apb_pclk"; + }; + + kmi@060000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi@070000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + wdt@0f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&smbclk>; + clock-names = "wdogclk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; + }; + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupts = <14>; + clocks = <&v2m_oscclk1>, <&smbclk>; + clock-names = "v2m:oscclk1", "apb_pclk"; + mode = "VGA"; + use_dma = <0>; + framebuffer = <0x18000000 0x00180000>; + }; + }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + mcc { + compatible = "simple-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + }; + }; diff --git a/arch/arm/boot/dts/rtsm_ve-v2p-ca15x1-ca7x1.dts b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x1-ca7x1.dts new file mode 100644 index 00000000000..fe8cf5dc857 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x1-ca7x1.dts @@ -0,0 +1,244 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x4CT + * ARMCortexA7x4CT + * RTSM_VE_Cortex_A15x1_A7x1.lisa + */ + +/dts-v1/; + +/memreserve/ 0xff000000 0x01000000; + +/ { + model = "RTSM_VE_CortexA15x1-A7x1"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x1_a7x1", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + clusters { + #address-cells = <1>; + #size-cells = <0>; + + cluster0: cluster@0 { + reg = <0>; +// freqs = <500000000 600000000 700000000 800000000 900000000 1000000000 1100000000 1200000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core0: core@0 { + reg = <0>; + }; + + }; + }; + + cluster1: cluster@1 { + reg = <1>; +// freqs = <350000000 400000000 500000000 600000000 700000000 800000000 900000000 1000000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core1: core@0 { + reg = <0>; + }; + + }; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + cluster = <&cluster0>; + core = <&core0>; +// clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cluster = <&cluster1>; + core = <&core1>; +// clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + cci@2c090000 { + compatible = "arm,cci-400", "arm,cci"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x2c090000 0 0x1000>; + ranges = <0x0 0x0 0x2c090000 0x10000>; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + dcscb@60000000 { + compatible = "arm,rtsm,dcscb"; + reg = <0 0x60000000 0 0x1000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif@0 { + compatible = "arm,gic-cpuif"; + cpuif-id = <0>; + cpu = <&cpu0>; + }; + gic-cpuif@1 { + compatible = "arm,gic-cpuif"; + cpuif-id = <1>; + cpu = <&cpu1>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-v2p-ca15x4-ca7x4.dts b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x4-ca7x4.dts new file mode 100644 index 00000000000..f715285131d --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x4-ca7x4.dts @@ -0,0 +1,358 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x4CT + * ARMCortexA7x4CT + * RTSM_VE_Cortex_A15x4_A7x4.lisa + */ + +/dts-v1/; + +/memreserve/ 0xff000000 0x01000000; + +/ { + model = "RTSM_VE_CortexA15x4-A7x4"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x4_a7x4", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + clusters { + #address-cells = <1>; + #size-cells = <0>; + + cluster0: cluster@0 { + reg = <0>; +// freqs = <500000000 600000000 700000000 800000000 900000000 1000000000 1100000000 1200000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core0: core@0 { + reg = <0>; + }; + + core1: core@1 { + reg = <1>; + }; + + core2: core@2 { + reg = <2>; + }; + + core3: core@3 { + reg = <3>; + }; + + }; + }; + + cluster1: cluster@1 { + reg = <1>; +// freqs = <350000000 400000000 500000000 600000000 700000000 800000000 900000000 1000000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core4: core@0 { + reg = <0>; + }; + + core5: core@1 { + reg = <1>; + }; + + core6: core@2 { + reg = <2>; + }; + + core7: core@3 { + reg = <3>; + }; + + }; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + cluster = <&cluster0>; + core = <&core0>; +// clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + cluster = <&cluster0>; + core = <&core1>; +// clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + cluster = <&cluster0>; + core = <&core2>; +// clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + cluster = <&cluster0>; + core = <&core3>; +// clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu4: cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cluster = <&cluster1>; + core = <&core4>; +// clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + + cpu5: cpu@5 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + cluster = <&cluster1>; + core = <&core5>; +// clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + + cpu6: cpu@6 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + cluster = <&cluster1>; + core = <&core6>; +// clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + + cpu7: cpu@7 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + cluster = <&cluster1>; + core = <&core7>; +// clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + cci@2c090000 { + compatible = "arm,cci-400", "arm,cci"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x2c090000 0 0x1000>; + ranges = <0x0 0x0 0x2c090000 0x10000>; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + dcscb@60000000 { + compatible = "arm,rtsm,dcscb"; + reg = <0 0x60000000 0 0x1000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif@0 { + compatible = "arm,gic-cpuif"; + cpuif-id = <0>; + cpu = <&cpu0>; + }; + gic-cpuif@1 { + compatible = "arm,gic-cpuif"; + cpuif-id = <1>; + cpu = <&cpu1>; + }; + gic-cpuif@2 { + compatible = "arm,gic-cpuif"; + cpuif-id = <2>; + cpu = <&cpu2>; + }; + gic-cpuif@3 { + compatible = "arm,gic-cpuif"; + cpuif-id = <3>; + cpu = <&cpu3>; + }; + gic-cpuif@4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu4>; + }; + gic-cpuif@5 { + compatible = "arm,gic-cpuif"; + cpuif-id = <5>; + cpu = <&cpu5>; + }; + gic-cpuif@6 { + compatible = "arm,gic-cpuif"; + cpuif-id = <6>; + cpu = <&cpu6>; + }; + gic-cpuif@7 { + compatible = "arm,gic-cpuif"; + cpuif-id = <7>; + cpu = <&cpu7>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index ac870fb3fa0..9584232ee6b 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -228,6 +228,7 @@ }; clcd@1f0000 { + status = "disabled"; compatible = "arm,pl111", "arm,primecell"; reg = <0x1f0000 0x1000>; interrupts = <14>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index f1420368355..6593398c11a 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -227,6 +227,7 @@ }; clcd@1f000 { + status = "disabled"; compatible = "arm,pl111", "arm,primecell"; reg = <0x1f000 0x1000>; interrupts = <14>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 9420053acc1..cc6a8c0cfe3 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -9,6 +9,8 @@ /dts-v1/; +/memreserve/ 0xbf000000 0x01000000; + / { model = "V2P-CA15"; arm,hbi = <0x237>; @@ -57,6 +59,8 @@ interrupts = <0 85 4>; clocks = <&oscclk5>; clock-names = "pxlclk"; + mode = "1024x768-16@60"; + framebuffer = <0 0xff000000 0 0x01000000>; }; memory-controller@2b0a0000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index a1481e41585..b7d23fd5924 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -9,6 +9,8 @@ /dts-v1/; +/memreserve/ 0xff000000 0x01000000; + / { model = "V2P-CA15_CA7"; arm,hbi = <0x249>; @@ -29,44 +31,106 @@ i2c1 = &v2m_i2c_pcie; }; - cpus { + clusters { #address-cells = <1>; #size-cells = <0>; - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; + cluster0: cluster@0 { reg = <0>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core0: core@0 { + reg = <0>; + }; + + core1: core@1 { + reg = <1>; + }; + + }; }; - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; + cluster1: cluster@1 { reg = <1>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core2: core@0 { + reg = <0>; + }; + + core3: core@1 { + reg = <1>; + }; + + core4: core@2 { + reg = <2>; + }; + }; }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x100>; + cluster = <&cluster1>; + core = <&core2>; + clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; }; cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; + cluster = <&cluster1>; + core = <&core3>; + clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; }; cpu4: cpu@4 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; + cluster = <&cluster1>; + core = <&core4>; + clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + cluster = <&cluster0>; + core = <&core0>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + cluster = <&cluster0>; + core = <&core1>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; }; }; memory@80000000 { device_type = "memory"; - reg = <0 0x80000000 0 0x40000000>; + reg = <0 0x80000000 0 0x80000000>; }; wdt@2a490000 { @@ -81,6 +145,8 @@ compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; + mode = "1024x768-16@60"; + framebuffer = <0 0xff000000 0 0x01000000>; clocks = <&oscclk5>; clock-names = "pxlclk"; }; @@ -102,6 +168,64 @@ <0 0x2c004000 0 0x2000>, <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; + + gic-cpuif@0 { + compatible = "arm,gic-cpuif"; + cpuif-id = <0>; + cpu = <&cpu0>; + }; + gic-cpuif@1 { + compatible = "arm,gic-cpuif"; + cpuif-id = <1>; + cpu = <&cpu1>; + }; + gic-cpuif@2 { + compatible = "arm,gic-cpuif"; + cpuif-id = <2>; + cpu = <&cpu2>; + }; + + gic-cpuif@3 { + compatible = "arm,gic-cpuif"; + cpuif-id = <3>; + cpu = <&cpu3>; + }; + + gic-cpuif@4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu4>; + }; + }; + + cci@2c090000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x2c090000 0 0x1000>; + ranges = <0x0 0x0 0x2c090000 0x10000>; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + cci-pmu@2c099000 { + compatible = "arm,cci-400-pmu"; + reg = <0 0x2c099000 0 0x6000>; + interrupts = <0 101 4>, + <0 102 4>, + <0 103 4>, + <0 104 4>, + <0 105 4>; }; memory-controller@7ffd0000 { @@ -139,12 +263,21 @@ <1 10 0xf08>; }; - pmu { + pmu_a15 { compatible = "arm,cortex-a15-pmu"; + cluster = <&cluster0>; interrupts = <0 68 4>, <0 69 4>; }; + pmu_a7 { + compatible = "arm,cortex-a7-pmu"; + cluster = <&cluster1>; + interrupts = <0 128 4>, + <0 129 4>, + <0 130 4>; + }; + oscclk6a: oscclk6a { /* Reference 24MHz clock */ compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index c544a550459..cf633ed6a1b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -9,6 +9,8 @@ /dts-v1/; +/memreserve/ 0xbf000000 0x01000000; + / { model = "V2P-CA5s"; arm,hbi = <0x225>; @@ -59,6 +61,8 @@ interrupts = <0 85 4>; clocks = <&oscclk3>; clock-names = "pxlclk"; + mode = "640x480-16@60"; + framebuffer = <0xbf000000 0x01000000>; }; memory-controller@2a150000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 62d9b225dcc..f83706bd3f9 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -9,6 +9,8 @@ /dts-v1/; +/include/ "clcd-panels.dtsi" + / { model = "V2P-CA9"; arm,hbi = <0x191>; @@ -73,6 +75,8 @@ interrupts = <0 44 4>; clocks = <&oscclk1>, <&oscclk2>; clock-names = "clcdclk", "apb_pclk"; + mode = "XVGA"; + use_dma = <1>; }; memory-controller@100e0000 { diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 48434cbe3e8..f27d6a7af57 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o AFLAGS_mcpm_head.o := -march=armv7-a AFLAGS_vlock.o := -march=armv7-a +CFLAGS_REMOVE_mcpm_entry.o = -pg diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 7c1bfc0aea0..4928cdacedf 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -105,7 +105,7 @@ static inline void __cpuinit arch_counter_set_user_access(void) asm volatile("mrc p15, 0, %0, c14, c1, 0" : "=r" (cntkctl)); /* disable user access to everything */ - cntkctl &= ~((3 << 8) | (7 << 0)); + cntkctl &= ~((3 << 8) | (3 << 0)); asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl)); } diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 308ad7d6f98..75bf07910b8 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <linux/types.h> + #ifndef __ASSEMBLY__ struct tag; @@ -16,8 +18,10 @@ struct pt_regs; struct smp_operations; #ifdef CONFIG_SMP #define smp_ops(ops) (&(ops)) +#define smp_init_ops(ops) (&(ops)) #else #define smp_ops(ops) (struct smp_operations *)NULL +#define smp_init_ops(ops) (bool (*)(void))NULL #endif struct machine_desc { @@ -41,6 +45,7 @@ struct machine_desc { unsigned char reserve_lp2 :1; /* never has lp2 */ char restart_mode; /* default restart mode */ struct smp_operations *smp; /* SMP operations */ + bool (*smp_init)(void); void (*fixup)(struct tag *, char **, struct meminfo *); void (*reserve)(void);/* reserve mem blocks */ diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h index ce0dbe7c162..c4ae171850f 100644 --- a/arch/arm/include/asm/psci.h +++ b/arch/arm/include/asm/psci.h @@ -32,5 +32,14 @@ struct psci_operations { }; extern struct psci_operations psci_ops; +extern struct smp_operations psci_smp_ops; + +#ifdef CONFIG_ARM_PSCI +void psci_init(void); +bool psci_smp_available(void); +#else +static inline void psci_init(void) { } +static inline bool psci_smp_available(void) { return false; } +#endif #endif /* __ASM_ARM_PSCI_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 5f3338eacad..dd9d90ab65d 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -82,6 +82,9 @@ obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o -obj-$(CONFIG_ARM_PSCI) += psci.o +ifeq ($(CONFIG_ARM_PSCI),y) +obj-y += psci.o +obj-$(CONFIG_SMP) += psci_smp.o +endif extra-y := $(head-y) vmlinux.lds diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c index 36531643cc2..46931880093 100644 --- a/arch/arm/kernel/psci.c +++ b/arch/arm/kernel/psci.c @@ -158,7 +158,7 @@ static const struct of_device_id psci_of_match[] __initconst = { {}, }; -static int __init psci_init(void) +void __init psci_init(void) { struct device_node *np; const char *method; @@ -166,7 +166,7 @@ static int __init psci_init(void) np = of_find_matching_node(NULL, psci_of_match); if (!np) - return 0; + return; pr_info("probing function IDs from device-tree\n"); @@ -206,6 +206,5 @@ static int __init psci_init(void) out_put_node: of_node_put(np); - return 0; + return; } -early_initcall(psci_init); diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c new file mode 100644 index 00000000000..23a11424c56 --- /dev/null +++ b/arch/arm/kernel/psci_smp.c @@ -0,0 +1,84 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> + */ + +#include <linux/init.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/smp.h> +#include <linux/of.h> + +#include <asm/psci.h> +#include <asm/smp_plat.h> + +/* + * psci_smp assumes that the following is true about PSCI: + * + * cpu_suspend Suspend the execution on a CPU + * @state we don't currently describe affinity levels, so just pass 0. + * @entry_point the first instruction to be executed on return + * returns 0 success, < 0 on failure + * + * cpu_off Power down a CPU + * @state we don't currently describe affinity levels, so just pass 0. + * no return on successful call + * + * cpu_on Power up a CPU + * @cpuid cpuid of target CPU, as from MPIDR + * @entry_point the first instruction to be executed on return + * returns 0 success, < 0 on failure + * + * migrate Migrate the context to a different CPU + * @cpuid cpuid of target CPU, as from MPIDR + * returns 0 success, < 0 on failure + * + */ + +extern void secondary_startup(void); + +static int __cpuinit psci_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + if (psci_ops.cpu_on) + return psci_ops.cpu_on(cpu_logical_map(cpu), + __pa(secondary_startup)); + return -ENODEV; +} + +#ifdef CONFIG_HOTPLUG_CPU +void __ref psci_cpu_die(unsigned int cpu) +{ + const struct psci_power_state ps = { + .type = PSCI_POWER_STATE_TYPE_POWER_DOWN, + }; + + if (psci_ops.cpu_off) + psci_ops.cpu_off(ps); + + /* We should never return */ + panic("psci: cpu %d failed to shutdown\n", cpu); +} +#else +#define psci_cpu_die NULL +#endif + +bool __init psci_smp_available(void) +{ + /* is cpu_on available at least? */ + return (psci_ops.cpu_on != NULL); +} + +struct smp_operations __initdata psci_smp_ops = { + .smp_boot_secondary = psci_boot_secondary, + .cpu_die = psci_cpu_die, +}; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b4b1d397592..ad84971b807 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -37,6 +37,7 @@ #include <asm/cputype.h> #include <asm/elf.h> #include <asm/procinfo.h> +#include <asm/psci.h> #include <asm/sections.h> #include <asm/setup.h> #include <asm/smp_plat.h> @@ -796,9 +797,15 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); arm_dt_init_cpu_maps(); + psci_init(); #ifdef CONFIG_SMP if (is_smp()) { - smp_set_ops(mdesc->smp); + if (!mdesc->smp_init || !mdesc->smp_init()) { + if (psci_smp_available()) + smp_set_ops(&psci_smp_ops); + else if (mdesc->smp) + smp_set_ops(mdesc->smp); + } smp_init_cpus(); } #endif diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 5907e10c37f..fe637e90cdb 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -56,5 +56,6 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" + select ARM_ERRATA_643719 endmenu diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index f134cd4a85f..bde4374ab6d 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -6,6 +6,8 @@ void vexpress_dt_smp_map_io(void); +bool vexpress_smp_init_ops(void); + extern struct smp_operations vexpress_smp_ops; extern void vexpress_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index dc1ace55d55..993c9ae5dc5 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -12,9 +12,11 @@ #include <linux/errno.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/of_fdt.h> #include <linux/vexpress.h> +#include <asm/mcpm.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -203,3 +205,21 @@ struct smp_operations __initdata vexpress_smp_ops = { .cpu_die = vexpress_cpu_die, #endif }; + +bool __init vexpress_smp_init_ops(void) +{ +#ifdef CONFIG_MCPM + /* + * The best way to detect a multi-cluster configuration at the moment + * is to look for the presence of a CCI in the system. + * Override the default vexpress_smp_ops if so. + */ + struct device_node *node; + node = of_find_compatible_node(NULL, NULL, "arm,cci-400"); + if (node && of_device_is_available(node)) { + mcpm_smp_set_ops(); + return true; + } +#endif + return false; +} diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 8802030df98..057f99b62ea 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -10,6 +10,7 @@ #include <linux/smp.h> #include <linux/init.h> #include <linux/irqchip.h> +#include <linux/memblock.h> #include <linux/of_address.h> #include <linux/of_fdt.h> #include <linux/of_irq.h> @@ -373,6 +374,31 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .init_machine = v2m_init, MACHINE_END +static void __init v2m_dt_hdlcd_init(void) +{ + struct device_node *node; + int len, na, ns; + const __be32 *prop; + phys_addr_t fb_base, fb_size; + + node = of_find_compatible_node(NULL, NULL, "arm,hdlcd"); + if (!node) + return; + + na = of_n_addr_cells(node); + ns = of_n_size_cells(node); + + prop = of_get_property(node, "framebuffer", &len); + if (WARN_ON(!prop || len < (na + ns) * sizeof(*prop))) + return; + + fb_base = of_read_number(prop, na); + fb_size = of_read_number(prop + na, ns); + + if (WARN_ON(memblock_remove(fb_base, fb_size))) + return; +}; + static struct map_desc v2m_rs1_io_desc __initdata = { .virtual = V2M_PERIPH, .pfn = __phys_to_pfn(0x1c000000), @@ -423,6 +449,8 @@ void __init v2m_dt_init_early(void) pr_warning("vexpress: DT HBI (%x) is not matching " "hardware (%x)!\n", dt_hbi, hbi); } + + v2m_dt_hdlcd_init(); } static void __init v2m_dt_timer_init(void) @@ -456,6 +484,7 @@ static const char * const v2m_dt_match[] __initconst = { DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .dt_compat = v2m_dt_match, .smp = smp_ops(vexpress_smp_ops), + .smp_init = smp_init_ops(vexpress_smp_init_ops), .map_io = v2m_dt_map_io, .init_early = v2m_dt_init_early, .init_irq = irqchip_init, diff --git a/arch/arm/mach-virt/Makefile b/arch/arm/mach-virt/Makefile index 042afc1f8c4..7ddbfa60227 100644 --- a/arch/arm/mach-virt/Makefile +++ b/arch/arm/mach-virt/Makefile @@ -3,4 +3,3 @@ # obj-y := virt.o -obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-virt/platsmp.c b/arch/arm/mach-virt/platsmp.c deleted file mode 100644 index f4143f5bfa5..00000000000 --- a/arch/arm/mach-virt/platsmp.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Dummy Virtual Machine - does what it says on the tin. - * - * Copyright (C) 2012 ARM Ltd - * Author: Will Deacon <will.deacon@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/of.h> - -#include <asm/psci.h> -#include <asm/smp_plat.h> - -extern void secondary_startup(void); - -static void __init virt_smp_init_cpus(void) -{ -} - -static void __init virt_smp_prepare_cpus(unsigned int max_cpus) -{ -} - -static int __cpuinit virt_boot_secondary(unsigned int cpu, - struct task_struct *idle) -{ - if (psci_ops.cpu_on) - return psci_ops.cpu_on(cpu_logical_map(cpu), - __pa(secondary_startup)); - return -ENODEV; -} - -struct smp_operations __initdata virt_smp_ops = { - .smp_init_cpus = virt_smp_init_cpus, - .smp_prepare_cpus = virt_smp_prepare_cpus, - .smp_boot_secondary = virt_boot_secondary, -}; diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c index 061f283f579..a67d2dd5bb6 100644 --- a/arch/arm/mach-virt/virt.c +++ b/arch/arm/mach-virt/virt.c @@ -36,11 +36,8 @@ static const char *virt_dt_match[] = { NULL }; -extern struct smp_operations virt_smp_ops; - DT_MACHINE_START(VIRT, "Dummy Virtual Machine") .init_irq = irqchip_init, .init_machine = virt_init, - .smp = smp_ops(virt_smp_ops), .dt_compat = virt_dt_match, MACHINE_END diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 5dbf13f954f..e207aa5f846 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -446,8 +446,16 @@ do_translation_fault(unsigned long addr, unsigned int fsr, if (pud_none(*pud_k)) goto bad_area; - if (!pud_present(*pud)) + if (!pud_present(*pud)) { set_pud(pud, *pud_k); + /* + * There is a small window during free_pgtables() where the + * user *pud entry is 0 but the TLB has not been invalidated + * and we get a level 2 (pmd) translation fault caused by the + * intermediate TLB caching of the old level 1 (pud) entry. + */ + flush_tlb_kernel_page(addr); + } pmd = pmd_offset(pud, addr); pmd_k = pmd_offset(pud_k, addr); @@ -470,8 +478,9 @@ do_translation_fault(unsigned long addr, unsigned int fsr, #endif if (pmd_none(pmd_k[index])) goto bad_area; + if (!pmd_present(pmd[index])) + copy_pmd(pmd, pmd_k); - copy_pmd(pmd, pmd_k); return 0; bad_area: diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S index b178d44e9ea..2677bc3762d 100644 --- a/arch/arm/plat-versatile/headsmp.S +++ b/arch/arm/plat-versatile/headsmp.S @@ -11,8 +11,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT - /* * Realview/Versatile Express specific entry point for secondary CPUs. * This provides a "holding pen" into which all secondary cores are held diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index b05ecab915c..5286e2d333b 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -26,4 +26,11 @@ config OMAP_INTERCONNECT help Driver to enable OMAP interconnect error handling driver. + +config ARM_CCI + bool "ARM CCI driver support" + depends on ARM + help + Driver supporting the CCI cache coherent interconnect for ARM + platforms. endmenu diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 3c7b53c1209..670cea44380 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -7,3 +7,5 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o # Interconnect bus driver for OMAP SoCs. obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o +# CCI cache coherent interconnect for ARM platforms +obj-$(CONFIG_ARM_CCI) += arm-cci.o diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c new file mode 100644 index 00000000000..ed284ab0041 --- /dev/null +++ b/drivers/bus/arm-cci.c @@ -0,0 +1,947 @@ +/* + * CCI cache coherent interconnect driver + * + * Copyright (C) 2013 ARM Ltd. + * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/arm-cci.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +#include <asm/cacheflush.h> +#include <asm/irq_regs.h> +#include <asm/pmu.h> +#include <asm/smp_plat.h> + +#define DRIVER_NAME "CCI" + +#define CCI_PORT_CTRL 0x0 +#define CCI_CTRL_STATUS 0xc + +#define CCI_ENABLE_SNOOP_REQ 0x1 +#define CCI_ENABLE_DVM_REQ 0x2 +#define CCI_ENABLE_REQ (CCI_ENABLE_SNOOP_REQ | CCI_ENABLE_DVM_REQ) + +struct cci_nb_ports { + unsigned int nb_ace; + unsigned int nb_ace_lite; +}; + +enum cci_ace_port_type { + ACE_INVALID_PORT = 0x0, + ACE_PORT, + ACE_LITE_PORT, +}; + +struct cci_ace_port { + void __iomem *base; + unsigned long phys; + enum cci_ace_port_type type; + struct device_node *dn; +}; + +static struct cci_ace_port *ports; +static unsigned int nb_cci_ports; + +static void __iomem *cci_ctrl_base; +static unsigned long cci_ctrl_phys; + +#ifdef CONFIG_HW_PERF_EVENTS + +static void __iomem *cci_pmu_base; + +#define CCI400_PMCR 0x0100 + +#define CCI400_PMU_CYCLE_CNTR_BASE 0x0000 +#define CCI400_PMU_CNTR_BASE(idx) (CCI400_PMU_CYCLE_CNTR_BASE + (idx) * 0x1000) + +#define CCI400_PMCR_CEN 0x00000001 +#define CCI400_PMCR_RST 0x00000002 +#define CCI400_PMCR_CCR 0x00000004 +#define CCI400_PMCR_CCD 0x00000008 +#define CCI400_PMCR_EX 0x00000010 +#define CCI400_PMCR_DP 0x00000020 +#define CCI400_PMCR_NCNT_MASK 0x0000F800 +#define CCI400_PMCR_NCNT_SHIFT 11 + +#define CCI400_PMU_EVT_SEL 0x000 +#define CCI400_PMU_CNTR 0x004 +#define CCI400_PMU_CNTR_CTRL 0x008 +#define CCI400_PMU_OVERFLOW 0x00C + +#define CCI400_PMU_OVERFLOW_FLAG 1 + +enum cci400_perf_events { + CCI400_PMU_CYCLES = 0xFF +}; + +#define CCI400_PMU_EVENT_MASK 0xff +#define CCI400_PMU_EVENT_SOURCE(event) ((event >> 5) & 0x7) +#define CCI400_PMU_EVENT_CODE(event) (event & 0x1f) + +#define CCI400_PMU_EVENT_SOURCE_S0 0 +#define CCI400_PMU_EVENT_SOURCE_S4 4 +#define CCI400_PMU_EVENT_SOURCE_M0 5 +#define CCI400_PMU_EVENT_SOURCE_M2 7 + +#define CCI400_PMU_EVENT_SLAVE_MIN 0x0 +#define CCI400_PMU_EVENT_SLAVE_MAX 0x13 + +#define CCI400_PMU_EVENT_MASTER_MIN 0x14 +#define CCI400_PMU_EVENT_MASTER_MAX 0x1A + +#define CCI400_PMU_MAX_HW_EVENTS 5 /* CCI PMU has 4 counters + 1 cycle counter */ + +#define CCI400_PMU_CYCLE_COUNTER_IDX 0 +#define CCI400_PMU_COUNTER0_IDX 1 +#define CCI400_PMU_COUNTER_LAST(cci_pmu) (CCI400_PMU_CYCLE_COUNTER_IDX + cci_pmu->num_events - 1) + + +static struct perf_event *events[CCI400_PMU_MAX_HW_EVENTS]; +static unsigned long used_mask[BITS_TO_LONGS(CCI400_PMU_MAX_HW_EVENTS)]; +static struct pmu_hw_events cci_hw_events = { + .events = events, + .used_mask = used_mask, +}; + +static int cci_pmu_validate_hw_event(u8 hw_event) +{ + u8 ev_source = CCI400_PMU_EVENT_SOURCE(hw_event); + u8 ev_code = CCI400_PMU_EVENT_CODE(hw_event); + + if (ev_source <= CCI400_PMU_EVENT_SOURCE_S4 && + ev_code <= CCI400_PMU_EVENT_SLAVE_MAX) + return hw_event; + else if (CCI400_PMU_EVENT_SOURCE_M0 <= ev_source && + ev_source <= CCI400_PMU_EVENT_SOURCE_M2 && + CCI400_PMU_EVENT_MASTER_MIN <= ev_code && + ev_code <= CCI400_PMU_EVENT_MASTER_MAX) + return hw_event; + + return -EINVAL; +} + +static inline int cci_pmu_counter_is_valid(struct arm_pmu *cci_pmu, int idx) +{ + return CCI400_PMU_CYCLE_COUNTER_IDX <= idx && + idx <= CCI400_PMU_COUNTER_LAST(cci_pmu); +} + +static inline u32 cci_pmu_read_register(int idx, unsigned int offset) +{ + return readl_relaxed(cci_pmu_base + CCI400_PMU_CNTR_BASE(idx) + offset); +} + +static inline void cci_pmu_write_register(u32 value, int idx, unsigned int offset) +{ + return writel_relaxed(value, cci_pmu_base + CCI400_PMU_CNTR_BASE(idx) + offset); +} + +static inline void cci_pmu_disable_counter(int idx) +{ + cci_pmu_write_register(0, idx, CCI400_PMU_CNTR_CTRL); +} + +static inline void cci_pmu_enable_counter(int idx) +{ + cci_pmu_write_register(1, idx, CCI400_PMU_CNTR_CTRL); +} + +static inline void cci_pmu_select_event(int idx, unsigned long event) +{ + event &= CCI400_PMU_EVENT_MASK; + cci_pmu_write_register(event, idx, CCI400_PMU_EVT_SEL); +} + +static u32 cci_pmu_get_max_counters(void) +{ + u32 n_cnts = (readl_relaxed(cci_ctrl_base + CCI400_PMCR) & + CCI400_PMCR_NCNT_MASK) >> CCI400_PMCR_NCNT_SHIFT; + + /* add 1 for cycle counter */ + return n_cnts + 1; +} + +static struct pmu_hw_events *cci_pmu_get_hw_events(void) +{ + return &cci_hw_events; +} + +static int cci_pmu_get_event_idx(struct pmu_hw_events *hw, struct perf_event *event) +{ + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hw_event = &event->hw; + unsigned long cci_event = hw_event->config_base & CCI400_PMU_EVENT_MASK; + int idx; + + if (cci_event == CCI400_PMU_CYCLES) { + if (test_and_set_bit(CCI400_PMU_CYCLE_COUNTER_IDX, hw->used_mask)) + return -EAGAIN; + + return CCI400_PMU_CYCLE_COUNTER_IDX; + } + + for (idx = CCI400_PMU_COUNTER0_IDX; idx <= CCI400_PMU_COUNTER_LAST(cci_pmu); ++idx) { + if (!test_and_set_bit(idx, hw->used_mask)) + return idx; + } + + /* No counters available */ + return -EAGAIN; +} + +static int cci_pmu_map_event(struct perf_event *event) +{ + int mapping; + u8 config = event->attr.config & CCI400_PMU_EVENT_MASK; + + if (event->attr.type < PERF_TYPE_MAX) + return -ENOENT; + + /* 0xff is used to represent CCI Cycles */ + if (config == 0xff) + mapping = config; + else + mapping = cci_pmu_validate_hw_event(config); + + return mapping; +} + +static int cci_pmu_request_irq(struct arm_pmu *cci_pmu, irq_handler_t handler) +{ + int irq, err, i = 0; + struct platform_device *pmu_device = cci_pmu->plat_device; + + if (unlikely(!pmu_device)) + return -ENODEV; + + /* CCI exports 6 interrupts - 1 nERRORIRQ + 5 nEVNTCNTOVERFLOW (PMU) + nERRORIRQ will be handled by secure firmware on TC2. So we + assume that all CCI interrupts listed in the linux device + tree are PMU interrupts. + + The following code should then be able to handle different routing + of the CCI PMU interrupts. + */ + while ((irq = platform_get_irq(pmu_device, i)) > 0) { + err = request_irq(irq, handler, 0, "arm-cci-pmu", cci_pmu); + if (err) { + dev_err(&pmu_device->dev, "unable to request IRQ%d for ARM CCI PMU counters\n", + irq); + return err; + } + i++; + } + + return 0; +} + +static irqreturn_t cci_pmu_handle_irq(int irq_num, void *dev) +{ + struct arm_pmu *cci_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + struct perf_sample_data data; + struct pt_regs *regs; + int idx; + + regs = get_irq_regs(); + + /* Iterate over counters and update the corresponding perf events. + This should work regardless of whether we have per-counter overflow + interrupt or a combined overflow interrupt. */ + for (idx = CCI400_PMU_CYCLE_COUNTER_IDX; idx <= CCI400_PMU_COUNTER_LAST(cci_pmu); idx++) { + struct perf_event *event = events->events[idx]; + struct hw_perf_event *hw_counter; + + if (!event) + continue; + + hw_counter = &event->hw; + + /* Did this counter overflow? */ + if (!(cci_pmu_read_register(idx, CCI400_PMU_OVERFLOW) & CCI400_PMU_OVERFLOW_FLAG)) + continue; + cci_pmu_write_register(CCI400_PMU_OVERFLOW_FLAG, idx, CCI400_PMU_OVERFLOW); + + armpmu_event_update(event); + perf_sample_data_init(&data, 0, hw_counter->last_period); + if (!armpmu_event_set_period(event)) + continue; + + if (perf_event_overflow(event, &data, regs)) + cci_pmu->disable(event); + } + + irq_work_run(); + return IRQ_HANDLED; +} + +static void cci_pmu_free_irq(struct arm_pmu *cci_pmu) +{ + int irq, i = 0; + struct platform_device *pmu_device = cci_pmu->plat_device; + + while ((irq = platform_get_irq(pmu_device, i)) > 0) { + free_irq(irq, cci_pmu); + i++; + } +} + +static void cci_pmu_enable_event(struct perf_event *event) +{ + unsigned long flags; + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + + if (unlikely(!cci_pmu_counter_is_valid(cci_pmu, idx))) { + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + return; + } + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Configure the event to count, unless you are counting cycles */ + if (idx != CCI400_PMU_CYCLE_COUNTER_IDX) + cci_pmu_select_event(idx, hw_counter->config_base); + + cci_pmu_enable_counter(idx); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void cci_pmu_disable_event(struct perf_event *event) +{ + unsigned long flags; + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + + if (unlikely(!cci_pmu_counter_is_valid(cci_pmu, idx))) { + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + return; + } + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + cci_pmu_disable_counter(idx); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void cci_pmu_start(struct arm_pmu *cci_pmu) +{ + u32 val; + unsigned long flags; + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Enable all the PMU counters. */ + val = readl(cci_ctrl_base + CCI400_PMCR) | CCI400_PMCR_CEN; + writel(val, cci_ctrl_base + CCI400_PMCR); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void cci_pmu_stop(struct arm_pmu *cci_pmu) +{ + u32 val; + unsigned long flags; + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Disable all the PMU counters. */ + val = readl(cci_ctrl_base + CCI400_PMCR) & ~CCI400_PMCR_CEN; + writel(val, cci_ctrl_base + CCI400_PMCR); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static u32 cci_pmu_read_counter(struct perf_event *event) +{ + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + u32 value; + + if (unlikely(!cci_pmu_counter_is_valid(cci_pmu, idx))) { + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + return 0; + } + value = cci_pmu_read_register(idx, CCI400_PMU_CNTR); + + return value; +} + +static void cci_pmu_write_counter(struct perf_event *event, u32 value) +{ + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + + if (unlikely(!cci_pmu_counter_is_valid(cci_pmu, idx))) + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + else + cci_pmu_write_register(value, idx, CCI400_PMU_CNTR); +} + +static struct arm_pmu cci_pmu = { + .name = DRIVER_NAME, + .max_period = (1LLU << 32) - 1, + .get_hw_events = cci_pmu_get_hw_events, + .get_event_idx = cci_pmu_get_event_idx, + .map_event = cci_pmu_map_event, + .request_irq = cci_pmu_request_irq, + .handle_irq = cci_pmu_handle_irq, + .free_irq = cci_pmu_free_irq, + .enable = cci_pmu_enable_event, + .disable = cci_pmu_disable_event, + .start = cci_pmu_start, + .stop = cci_pmu_stop, + .read_counter = cci_pmu_read_counter, + .write_counter = cci_pmu_write_counter, +}; + +static int cci_pmu_probe(struct platform_device *pdev) +{ + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + cci_pmu_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(cci_pmu_base)) + return PTR_ERR(cci_pmu_base); + + cci_pmu.plat_device = pdev; + cci_pmu.num_events = cci_pmu_get_max_counters(); + raw_spin_lock_init(&cci_hw_events.pmu_lock); + cpumask_setall(&cci_pmu.valid_cpus); + + return armpmu_register(&cci_pmu, -1); +} + +static const struct of_device_id arm_cci_pmu_matches[] = { + {.compatible = "arm,cci-400-pmu"}, + {}, +}; + +static struct platform_driver cci_pmu_platform_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = arm_cci_pmu_matches, + }, + .probe = cci_pmu_probe, +}; + +static int __init cci_pmu_init(void) +{ + if (platform_driver_register(&cci_pmu_platform_driver)) + WARN(1, "unable to register CCI platform driver\n"); + return 0; +} + +#else + +static int __init cci_pmu_init(void) +{ + return 0; +} + +static void cci_pmu_destroy(void) { } + +#endif /* CONFIG_HW_PERF_EVENTS */ + +struct cpu_port { + u64 mpidr; + u32 port; +}; + +/* + * Use the port MSB as valid flag, shift can be made dynamic + * by computing number of bits required for port indexes. + * Code disabling CCI cpu ports runs with D-cache invalidated + * and SCTLR bit clear so data accesses must be kept to a minimum + * to improve performance; for now shift is left static to + * avoid one more data access while disabling the CCI port. + */ +#define PORT_VALID_SHIFT 31 +#define PORT_VALID (0x1 << PORT_VALID_SHIFT) + +static inline void init_cpu_port(struct cpu_port *port, u32 index, u64 mpidr) +{ + port->port = PORT_VALID | index; + port->mpidr = mpidr; +} + +static inline bool cpu_port_is_valid(struct cpu_port *port) +{ + return !!(port->port & PORT_VALID); +} + +static inline bool cpu_port_match(struct cpu_port *port, u64 mpidr) +{ + return port->mpidr == (mpidr & MPIDR_HWID_BITMASK); +} + +static struct cpu_port cpu_port[NR_CPUS]; + +/** + * __cci_ace_get_port - Function to retrieve the port index connected to + * a cpu or device. + * + * @dn: device node of the device to look-up + * @type: port type + * + * Return value: + * - CCI port index if success + * - -ENODEV if failure + */ +static int __cci_ace_get_port(struct device_node *dn, int type) +{ + int i; + bool ace_match; + struct device_node *cci_portn; + + cci_portn = of_parse_phandle(dn, "cci-control-port", 0); + for (i = 0; i < nb_cci_ports; i++) { + ace_match = ports[i].type == type; + if (ace_match && cci_portn == ports[i].dn) + return i; + } + return -ENODEV; +} + +int cci_ace_get_port(struct device_node *dn) +{ + return __cci_ace_get_port(dn, ACE_LITE_PORT); +} +EXPORT_SYMBOL_GPL(cci_ace_get_port); + +static void __init cci_ace_init_ports(void) +{ + int port, ac, cpu; + u64 hwid; + const u32 *cell; + struct device_node *cpun, *cpus; + + cpus = of_find_node_by_path("/cpus"); + if (WARN(!cpus, "Missing cpus node, bailing out\n")) + return; + + if (WARN_ON(of_property_read_u32(cpus, "#address-cells", &ac))) + ac = of_n_addr_cells(cpus); + + /* + * Port index look-up speeds up the function disabling ports by CPU, + * since the logical to port index mapping is done once and does + * not change after system boot. + * The stashed index array is initialized for all possible CPUs + * at probe time. + */ + for_each_child_of_node(cpus, cpun) { + if (of_node_cmp(cpun->type, "cpu")) + continue; + cell = of_get_property(cpun, "reg", NULL); + if (WARN(!cell, "%s: missing reg property\n", cpun->full_name)) + continue; + + hwid = of_read_number(cell, ac); + cpu = get_logical_index(hwid & MPIDR_HWID_BITMASK); + + if (cpu < 0 || !cpu_possible(cpu)) + continue; + port = __cci_ace_get_port(cpun, ACE_PORT); + if (port < 0) + continue; + + init_cpu_port(&cpu_port[cpu], port, cpu_logical_map(cpu)); + } + + for_each_possible_cpu(cpu) { + WARN(!cpu_port_is_valid(&cpu_port[cpu]), + "CPU %u does not have an associated CCI port\n", + cpu); + } +} +/* + * Functions to enable/disable a CCI interconnect slave port + * + * They are called by low-level power management code to disable slave + * interfaces snoops and DVM broadcast. + * Since they may execute with cache data allocation disabled and + * after the caches have been cleaned and invalidated the functions provide + * no explicit locking since they may run with D-cache disabled, so normal + * cacheable kernel locks based on ldrex/strex may not work. + * Locking has to be provided by BSP implementations to ensure proper + * operations. + */ + +/** + * cci_port_control() - function to control a CCI port + * + * @port: index of the port to setup + * @enable: if true enables the port, if false disables it + */ +static void notrace cci_port_control(unsigned int port, bool enable) +{ + void __iomem *base = ports[port].base; + + writel_relaxed(enable ? CCI_ENABLE_REQ : 0, base + CCI_PORT_CTRL); + /* + * This function is called from power down procedures + * and must not execute any instruction that might + * cause the processor to be put in a quiescent state + * (eg wfi). Hence, cpu_relax() can not be added to this + * read loop to optimize power, since it might hide possibly + * disruptive operations. + */ + while (readl_relaxed(cci_ctrl_base + CCI_CTRL_STATUS) & 0x1) + ; +} + +/** + * cci_disable_port_by_cpu() - function to disable a CCI port by CPU + * reference + * + * @mpidr: mpidr of the CPU whose CCI port should be disabled + * + * Disabling a CCI port for a CPU implies disabling the CCI port + * controlling that CPU cluster. Code disabling CPU CCI ports + * must make sure that the CPU running the code is the last active CPU + * in the cluster ie all other CPUs are quiescent in a low power state. + * + * Return: + * 0 on success + * -ENODEV on port look-up failure + */ +int notrace cci_disable_port_by_cpu(u64 mpidr) +{ + int cpu; + bool is_valid; + for (cpu = 0; cpu < nr_cpu_ids; cpu++) { + is_valid = cpu_port_is_valid(&cpu_port[cpu]); + if (is_valid && cpu_port_match(&cpu_port[cpu], mpidr)) { + cci_port_control(cpu_port[cpu].port, false); + return 0; + } + } + return -ENODEV; +} +EXPORT_SYMBOL_GPL(cci_disable_port_by_cpu); + +/** + * cci_enable_port_for_self() - enable a CCI port for calling CPU + * + * Enabling a CCI port for the calling CPU implies enabling the CCI + * port controlling that CPU's cluster. Caller must make sure that the + * CPU running the code is the first active CPU in the cluster and all + * other CPUs are quiescent in a low power state or waiting for this CPU + * to complete the CCI initialization. + * + * Because this is called when the MMU is still off and with no stack, + * the code must be position independent and ideally rely on callee + * clobbered registers only. To achieve this we must code this function + * entirely in assembler. + * + * On success this returns with the proper CCI port enabled. In case of + * any failure this never returns as the inability to enable the CCI is + * fatal and there is no possible recovery at this stage. + */ +asmlinkage void __naked cci_enable_port_for_self(void) +{ + asm volatile ("\n" + +" mrc p15, 0, r0, c0, c0, 5 @ get MPIDR value \n" +" and r0, r0, #"__stringify(MPIDR_HWID_BITMASK)" \n" +" adr r1, 5f \n" +" ldr r2, [r1] \n" +" add r1, r1, r2 @ &cpu_port \n" +" add ip, r1, %[sizeof_cpu_port] \n" + + /* Loop over the cpu_port array looking for a matching MPIDR */ +"1: ldr r2, [r1, %[offsetof_cpu_port_mpidr_lsb]] \n" +" cmp r2, r0 @ compare MPIDR \n" +" bne 2f \n" + + /* Found a match, now test port validity */ +" ldr r3, [r1, %[offsetof_cpu_port_port]] \n" +" tst r3, #"__stringify(PORT_VALID)" \n" +" bne 3f \n" + + /* no match, loop with the next cpu_port entry */ +"2: add r1, r1, %[sizeof_struct_cpu_port] \n" +" cmp r1, ip @ done? \n" +" blo 1b \n" + + /* CCI port not found -- cheaply try to stall this CPU */ +"cci_port_not_found: \n" +" wfi \n" +" wfe \n" +" b cci_port_not_found \n" + + /* Use matched port index to look up the corresponding ports entry */ +"3: bic r3, r3, #"__stringify(PORT_VALID)" \n" +" adr r0, 6f \n" +" ldmia r0, {r1, r2} \n" +" sub r1, r1, r0 @ virt - phys \n" +" ldr r0, [r0, r2] @ *(&ports) \n" +" mov r2, %[sizeof_struct_ace_port] \n" +" mla r0, r2, r3, r0 @ &ports[index] \n" +" sub r0, r0, r1 @ virt_to_phys() \n" + + /* Enable the CCI port */ +" ldr r0, [r0, %[offsetof_port_phys]] \n" +" mov r3, #"__stringify(CCI_ENABLE_REQ)" \n" +" str r3, [r0, #"__stringify(CCI_PORT_CTRL)"] \n" + + /* poll the status reg for completion */ +" adr r1, 7f \n" +" ldr r0, [r1] \n" +" ldr r0, [r0, r1] @ cci_ctrl_base \n" +"4: ldr r1, [r0, #"__stringify(CCI_CTRL_STATUS)"] \n" +" tst r1, #1 \n" +" bne 4b \n" + +" mov r0, #0 \n" +" bx lr \n" + +" .align 2 \n" +"5: .word cpu_port - . \n" +"6: .word . \n" +" .word ports - 6b \n" +"7: .word cci_ctrl_phys - . \n" + : : + [sizeof_cpu_port] "i" (sizeof(cpu_port)), +#ifndef __ARMEB__ + [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)), +#else + [offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)+4), +#endif + [offsetof_cpu_port_port] "i" (offsetof(struct cpu_port, port)), + [sizeof_struct_cpu_port] "i" (sizeof(struct cpu_port)), + [sizeof_struct_ace_port] "i" (sizeof(struct cci_ace_port)), + [offsetof_port_phys] "i" (offsetof(struct cci_ace_port, phys)) ); + + unreachable(); +} + +/** + * __cci_control_port_by_device() - function to control a CCI port by device + * reference + * + * @dn: device node pointer of the device whose CCI port should be + * controlled + * @enable: if true enables the port, if false disables it + * + * Return: + * 0 on success + * -ENODEV on port look-up failure + */ +int notrace __cci_control_port_by_device(struct device_node *dn, bool enable) +{ + int port; + + if (!dn) + return -ENODEV; + + port = __cci_ace_get_port(dn, ACE_LITE_PORT); + if (WARN_ONCE(port < 0, "node %s ACE lite port look-up failure\n", + dn->full_name)) + return -ENODEV; + cci_port_control(port, enable); + return 0; +} +EXPORT_SYMBOL_GPL(__cci_control_port_by_device); + +/** + * __cci_control_port_by_index() - function to control a CCI port by port index + * + * @port: port index previously retrieved with cci_ace_get_port() + * @enable: if true enables the port, if false disables it + * + * Return: + * 0 on success + * -ENODEV on port index out of range + * -EPERM if operation carried out on an ACE PORT + */ +int notrace __cci_control_port_by_index(u32 port, bool enable) +{ + if (port >= nb_cci_ports || ports[port].type == ACE_INVALID_PORT) + return -ENODEV; + /* + * CCI control for ports connected to CPUS is extremely fragile + * and must be made to go through a specific and controlled + * interface (ie cci_disable_port_by_cpu(); control by general purpose + * indexing is therefore disabled for ACE ports. + */ + if (ports[port].type == ACE_PORT) + return -EPERM; + + cci_port_control(port, enable); + return 0; +} +EXPORT_SYMBOL_GPL(__cci_control_port_by_index); + +static const struct cci_nb_ports cci400_ports = { + .nb_ace = 2, + .nb_ace_lite = 3 +}; + +static const struct of_device_id arm_cci_matches[] = { + {.compatible = "arm,cci-400", .data = &cci400_ports }, + {}, +}; + +static const struct of_device_id arm_cci_ctrl_if_matches[] = { + {.compatible = "arm,cci-400-ctrl-if", }, + {}, +}; + +static int __init cci_probe(void) +{ + struct cci_nb_ports const *cci_config; + int ret, i, nb_ace = 0, nb_ace_lite = 0; + struct device_node *np, *cp; + struct resource res; + const char *match_str; + bool is_ace; + + np = of_find_matching_node(NULL, arm_cci_matches); + if (!np) + return -ENODEV; + + cci_config = of_match_node(arm_cci_matches, np)->data; + if (!cci_config) + return -ENODEV; + + nb_cci_ports = cci_config->nb_ace + cci_config->nb_ace_lite; + + ports = kcalloc(sizeof(*ports), nb_cci_ports, GFP_KERNEL); + if (!ports) + return -ENOMEM; + + ret = of_address_to_resource(np, 0, &res); + if (!ret) { + cci_ctrl_base = ioremap(res.start, resource_size(&res)); + cci_ctrl_phys = res.start; + } + if (ret || !cci_ctrl_base) { + WARN(1, "unable to ioremap CCI ctrl\n"); + ret = -ENXIO; + goto memalloc_err; + } + + for_each_child_of_node(np, cp) { + if (!of_match_node(arm_cci_ctrl_if_matches, cp)) + continue; + + i = nb_ace + nb_ace_lite; + + if (i >= nb_cci_ports) + break; + + if (of_property_read_string(cp, "interface-type", + &match_str)) { + WARN(1, "node %s missing interface-type property\n", + cp->full_name); + continue; + } + is_ace = strcmp(match_str, "ace") == 0; + if (!is_ace && strcmp(match_str, "ace-lite")) { + WARN(1, "node %s containing invalid interface-type property, skipping it\n", + cp->full_name); + continue; + } + + ret = of_address_to_resource(cp, 0, &res); + if (!ret) { + ports[i].base = ioremap(res.start, resource_size(&res)); + ports[i].phys = res.start; + } + if (ret || !ports[i].base) { + WARN(1, "unable to ioremap CCI port %d\n", i); + continue; + } + + if (is_ace) { + if (WARN_ON(nb_ace >= cci_config->nb_ace)) + continue; + ports[i].type = ACE_PORT; + ++nb_ace; + } else { + if (WARN_ON(nb_ace_lite >= cci_config->nb_ace_lite)) + continue; + ports[i].type = ACE_LITE_PORT; + ++nb_ace_lite; + } + ports[i].dn = cp; + } + + /* initialize a stashed array of ACE ports to speed-up look-up */ + cci_ace_init_ports(); + + /* + * Multi-cluster systems may need this data when non-coherent, during + * cluster power-up/power-down. Make sure it reaches main memory. + */ + sync_cache_w(&cci_ctrl_base); + sync_cache_w(&cci_ctrl_phys); + sync_cache_w(&ports); + sync_cache_w(&cpu_port); + __sync_cache_range_w(ports, sizeof(*ports) * nb_cci_ports); + pr_info("ARM CCI driver probed\n"); + return 0; + +memalloc_err: + + kfree(ports); + return ret; +} + +static int cci_init_status = -EAGAIN; +static DEFINE_MUTEX(cci_probing); + +static int __init cci_init(void) +{ + if (cci_init_status != -EAGAIN) + return cci_init_status; + + mutex_lock(&cci_probing); + if (cci_init_status == -EAGAIN) + cci_init_status = cci_probe(); + mutex_unlock(&cci_probing); + return cci_init_status; +} + +/* + * To sort out early init calls ordering a helper function is provided to + * check if the CCI driver has beed initialized. Function check if the driver + * has been initialized, if not it calls the init function that probes + * the driver and updates the return value. + */ +bool __init cci_probed(void) +{ + return cci_init() == 0; +} +EXPORT_SYMBOL_GPL(cci_probed); + +early_initcall(cci_init); +core_initcall(cci_pmu_init); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("ARM CCI support"); diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 0357ac44638..d0d9b212475 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -42,7 +42,7 @@ config COMMON_CLK_WM831X config COMMON_CLK_VERSATILE bool "Clock driver for ARM Reference designs" - depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS + depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS || ARM64 ---help--- Supports clocking on ARM Reference designs: - Integrator/AP and Integrator/CP diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c index 256c8be74df..2dc8b41a339 100644 --- a/drivers/clk/versatile/clk-vexpress-osc.c +++ b/drivers/clk/versatile/clk-vexpress-osc.c @@ -107,7 +107,7 @@ void __init vexpress_osc_of_setup(struct device_node *node) osc->func = vexpress_config_func_get_by_node(node); if (!osc->func) { pr_err("Failed to obtain config func for node '%s'!\n", - node->name); + node->full_name); goto error; } @@ -119,7 +119,7 @@ void __init vexpress_osc_of_setup(struct device_node *node) of_property_read_string(node, "clock-output-names", &init.name); if (!init.name) - init.name = node->name; + init.name = node->full_name; init.ops = &vexpress_osc_ops; init.flags = CLK_IS_ROOT; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 391eda139d6..a5e54f0d6a7 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1144,7 +1144,8 @@ config MCP_UCB1200_TS endmenu config VEXPRESS_CONFIG - bool + bool "ARM Versatile Express platform infrastructure" + depends on ARM || ARM64 help Platform configuration infrastructure for the ARM Ltd. Versatile Express. diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index d2599aa26f9..7f429afce11 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -351,6 +351,8 @@ void __init vexpress_sysreg_of_early_init(void) } +#ifdef CONFIG_GPIOLIB + #define VEXPRESS_SYSREG_GPIO(_name, _reg, _value) \ [VEXPRESS_GPIO_##_name] = { \ .reg = _reg, \ @@ -445,6 +447,8 @@ struct gpio_led_platform_data vexpress_sysreg_leds_pdata = { .leds = vexpress_sysreg_leds, }; +#endif + static ssize_t vexpress_sysreg_sys_id_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -480,6 +484,9 @@ static int vexpress_sysreg_probe(struct platform_device *pdev) setup_timer(&vexpress_sysreg_config_timer, vexpress_sysreg_config_complete, 0); + vexpress_sysreg_dev = &pdev->dev; + +#ifdef CONFIG_GPIOLIB vexpress_sysreg_gpio_chip.dev = &pdev->dev; err = gpiochip_add(&vexpress_sysreg_gpio_chip); if (err) { @@ -490,11 +497,10 @@ static int vexpress_sysreg_probe(struct platform_device *pdev) return err; } - vexpress_sysreg_dev = &pdev->dev; - platform_device_register_data(vexpress_sysreg_dev, "leds-gpio", PLATFORM_DEVID_AUTO, &vexpress_sysreg_leds_pdata, sizeof(vexpress_sysreg_leds_pdata)); +#endif device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id); diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index dfbf978315d..bdd703c6bf1 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -1896,7 +1896,7 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr, SMC_SELECT_BANK(lp, 1); val = SMC_GET_BASE(lp); val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT; - if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) { + if (((unsigned long)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) { printk("%s: IOADDR %p doesn't match configuration (%x).\n", CARDNAME, ioaddr, val); } diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 349e9ae8090..ee039dcead0 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -32,7 +32,8 @@ config POWER_RESET_RESTART user presses a key. u-boot then boots into Linux. config POWER_RESET_VEXPRESS - bool + bool "ARM Versatile Express power-off and reset driver" + depends on ARM || ARM64 depends on POWER_RESET help Power off and reset support for the ARM Ltd. Versatile diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 2e937bdace6..d0d9c5ea9e3 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -39,6 +39,11 @@ config VIDEOMODE_HELPERS config HDMI bool +config VEXPRESS_DVI_CONTROL + bool "Versatile Express DVI control" + depends on FB && VEXPRESS_CONFIG + default y + menuconfig FB tristate "Support for frame buffer devices" ---help--- @@ -326,6 +331,21 @@ config FB_ARMCLCD here and read <file:Documentation/kbuild/modules.txt>. The module will be called amba-clcd. +config FB_ARMHDLCD + tristate "ARM High Definition LCD support" + depends on FB && ARM + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This framebuffer device driver is for the ARM High Definition + Colour LCD controller. + + If you want to compile this as a module (=code which can be + inserted into and removed from the running kernel), say M + here and read <file:Documentation/kbuild/modules.txt>. The module + will be called arm-hdlcd. + config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && ARCH_ACORN diff --git a/drivers/video/Makefile b/drivers/video/Makefile index e8bae8dd480..33869eea498 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -99,6 +99,7 @@ obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o obj-$(CONFIG_FB_PVR2) += pvr2fb.o obj-$(CONFIG_FB_VOODOO1) += sstfb.o obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o +obj-$(CONFIG_FB_ARMHDLCD) += arm-hdlcd.o obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o obj-$(CONFIG_FB_68328) += 68328fb.o obj-$(CONFIG_FB_GBE) += gbefb.o @@ -177,3 +178,6 @@ obj-$(CONFIG_VIDEOMODE_HELPERS) += display_timing.o videomode.o ifeq ($(CONFIG_OF),y) obj-$(CONFIG_VIDEOMODE_HELPERS) += of_display_timing.o of_videomode.o endif + +# platform specific output drivers +obj-$(CONFIG_VEXPRESS_DVI_CONTROL) += vexpress-dvi.o diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 0a2cce7285b..94a1998338d 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -16,7 +16,10 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/memblock.h> #include <linux/mm.h> +#include <linux/of.h> #include <linux/fb.h> #include <linux/init.h> #include <linux/ioport.h> @@ -30,6 +33,16 @@ #define to_clcd(info) container_of(info, struct clcd_fb, fb) +#ifdef CONFIG_ARM +#define clcdfb_dma_alloc dma_alloc_writecombine +#define clcdfb_dma_free dma_free_writecombine +#define clcdfb_dma_mmap dma_mmap_writecombine +#else +#define clcdfb_dma_alloc dma_alloc_coherent +#define clcdfb_dma_free dma_free_coherent +#define clcdfb_dma_mmap dma_mmap_coherent +#endif + /* This is limited to 16 characters when displayed by X startup */ static const char *clcd_name = "CLCD FB"; @@ -392,6 +405,44 @@ static int clcdfb_blank(int blank_mode, struct fb_info *info) return 0; } +int clcdfb_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return clcdfb_dma_mmap(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +int clcdfb_mmap_io(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + unsigned long user_count, count, pfn, off; + + user_count = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; + count = PAGE_ALIGN(fb->fb.fix.smem_len) >> PAGE_SHIFT; + pfn = fb->fb.fix.smem_start >> PAGE_SHIFT; + off = vma->vm_pgoff; + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + if (off < count && user_count <= (count - off)) + return remap_pfn_range(vma, vma->vm_start, pfn + off, + user_count << PAGE_SHIFT, + vma->vm_page_prot); + + return -ENXIO; +} + +void clcdfb_remove_dma(struct clcd_fb *fb) +{ + clcdfb_dma_free(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +void clcdfb_remove_io(struct clcd_fb *fb) +{ + iounmap(fb->fb.screen_base); +} + static int clcdfb_mmap(struct fb_info *info, struct vm_area_struct *vma) { @@ -542,14 +593,239 @@ static int clcdfb_register(struct clcd_fb *fb) return ret; } +struct string_lookup { + const char *string; + const u32 val; +}; + +static struct string_lookup vmode_lookups[] = { + { "FB_VMODE_NONINTERLACED", FB_VMODE_NONINTERLACED}, + { "FB_VMODE_INTERLACED", FB_VMODE_INTERLACED}, + { "FB_VMODE_DOUBLE", FB_VMODE_DOUBLE}, + { "FB_VMODE_ODD_FLD_FIRST", FB_VMODE_ODD_FLD_FIRST}, + { NULL, 0 }, +}; + +static struct string_lookup tim2_lookups[] = { + { "TIM2_CLKSEL", TIM2_CLKSEL}, + { "TIM2_IVS", TIM2_IVS}, + { "TIM2_IHS", TIM2_IHS}, + { "TIM2_IPC", TIM2_IPC}, + { "TIM2_IOE", TIM2_IOE}, + { "TIM2_BCD", TIM2_BCD}, + { NULL, 0}, +}; +static struct string_lookup cntl_lookups[] = { + {"CNTL_LCDEN", CNTL_LCDEN}, + {"CNTL_LCDBPP1", CNTL_LCDBPP1}, + {"CNTL_LCDBPP2", CNTL_LCDBPP2}, + {"CNTL_LCDBPP4", CNTL_LCDBPP4}, + {"CNTL_LCDBPP8", CNTL_LCDBPP8}, + {"CNTL_LCDBPP16", CNTL_LCDBPP16}, + {"CNTL_LCDBPP16_565", CNTL_LCDBPP16_565}, + {"CNTL_LCDBPP16_444", CNTL_LCDBPP16_444}, + {"CNTL_LCDBPP24", CNTL_LCDBPP24}, + {"CNTL_LCDBW", CNTL_LCDBW}, + {"CNTL_LCDTFT", CNTL_LCDTFT}, + {"CNTL_LCDMONO8", CNTL_LCDMONO8}, + {"CNTL_LCDDUAL", CNTL_LCDDUAL}, + {"CNTL_BGR", CNTL_BGR}, + {"CNTL_BEBO", CNTL_BEBO}, + {"CNTL_BEPO", CNTL_BEPO}, + {"CNTL_LCDPWR", CNTL_LCDPWR}, + {"CNTL_LCDVCOMP(1)", CNTL_LCDVCOMP(1)}, + {"CNTL_LCDVCOMP(2)", CNTL_LCDVCOMP(2)}, + {"CNTL_LCDVCOMP(3)", CNTL_LCDVCOMP(3)}, + {"CNTL_LCDVCOMP(4)", CNTL_LCDVCOMP(4)}, + {"CNTL_LCDVCOMP(5)", CNTL_LCDVCOMP(5)}, + {"CNTL_LCDVCOMP(6)", CNTL_LCDVCOMP(6)}, + {"CNTL_LCDVCOMP(7)", CNTL_LCDVCOMP(7)}, + {"CNTL_LDMAFIFOTIME", CNTL_LDMAFIFOTIME}, + {"CNTL_WATERMARK", CNTL_WATERMARK}, + { NULL, 0}, +}; +static struct string_lookup caps_lookups[] = { + {"CLCD_CAP_RGB444", CLCD_CAP_RGB444}, + {"CLCD_CAP_RGB5551", CLCD_CAP_RGB5551}, + {"CLCD_CAP_RGB565", CLCD_CAP_RGB565}, + {"CLCD_CAP_RGB888", CLCD_CAP_RGB888}, + {"CLCD_CAP_BGR444", CLCD_CAP_BGR444}, + {"CLCD_CAP_BGR5551", CLCD_CAP_BGR5551}, + {"CLCD_CAP_BGR565", CLCD_CAP_BGR565}, + {"CLCD_CAP_BGR888", CLCD_CAP_BGR888}, + {"CLCD_CAP_444", CLCD_CAP_444}, + {"CLCD_CAP_5551", CLCD_CAP_5551}, + {"CLCD_CAP_565", CLCD_CAP_565}, + {"CLCD_CAP_888", CLCD_CAP_888}, + {"CLCD_CAP_RGB", CLCD_CAP_RGB}, + {"CLCD_CAP_BGR", CLCD_CAP_BGR}, + {"CLCD_CAP_ALL", CLCD_CAP_ALL}, + { NULL, 0}, +}; + +u32 parse_setting(struct string_lookup *lookup, const char *name) +{ + int i = 0; + while (lookup[i].string != NULL) { + if (strcmp(lookup[i].string, name) == 0) + return lookup[i].val; + ++i; + } + return -EINVAL; +} + +u32 get_string_lookup(struct device_node *node, const char *name, + struct string_lookup *lookup) +{ + const char *string; + int count, i, ret = 0; + + count = of_property_count_strings(node, name); + if (count >= 0) + for (i = 0; i < count; i++) + if (of_property_read_string_index(node, name, i, + &string) == 0) + ret |= parse_setting(lookup, string); + return ret; +} + +int get_val(struct device_node *node, const char *string) +{ + u32 ret = 0; + + if (of_property_read_u32(node, string, &ret)) + ret = -1; + return ret; +} + +struct clcd_panel *getPanel(struct device_node *node) +{ + static struct clcd_panel panel; + + panel.mode.refresh = get_val(node, "refresh"); + panel.mode.xres = get_val(node, "xres"); + panel.mode.yres = get_val(node, "yres"); + panel.mode.pixclock = get_val(node, "pixclock"); + panel.mode.left_margin = get_val(node, "left_margin"); + panel.mode.right_margin = get_val(node, "right_margin"); + panel.mode.upper_margin = get_val(node, "upper_margin"); + panel.mode.lower_margin = get_val(node, "lower_margin"); + panel.mode.hsync_len = get_val(node, "hsync_len"); + panel.mode.vsync_len = get_val(node, "vsync_len"); + panel.mode.sync = get_val(node, "sync"); + panel.bpp = get_val(node, "bpp"); + panel.width = (signed short) get_val(node, "width"); + panel.height = (signed short) get_val(node, "height"); + + panel.mode.vmode = get_string_lookup(node, "vmode", vmode_lookups); + panel.tim2 = get_string_lookup(node, "tim2", tim2_lookups); + panel.cntl = get_string_lookup(node, "cntl", cntl_lookups); + panel.caps = get_string_lookup(node, "caps", caps_lookups); + + return &panel; +} + +struct clcd_panel *clcdfb_get_panel(const char *name) +{ + struct device_node *node = NULL; + const char *mode; + struct clcd_panel *panel = NULL; + + do { + node = of_find_compatible_node(node, NULL, "panel"); + if (node) + if (of_property_read_string(node, "mode", &mode) == 0) + if (strcmp(mode, name) == 0) { + panel = getPanel(node); + panel->mode.name = name; + } + } while (node != NULL); + + return panel; +} + +#ifdef CONFIG_OF +static int clcdfb_dt_init(struct clcd_fb *fb) +{ + int err = 0; + struct device_node *node; + const char *mode; + dma_addr_t dma; + u32 use_dma; + const __be32 *prop; + int len, na, ns; + phys_addr_t fb_base, fb_size; + + node = fb->dev->dev.of_node; + if (!node) + return -ENODEV; + + na = of_n_addr_cells(node); + ns = of_n_size_cells(node); + + if (WARN_ON(of_property_read_string(node, "mode", &mode))) + return -ENODEV; + + fb->panel = clcdfb_get_panel(mode); + if (!fb->panel) + return -EINVAL; + fb->fb.fix.smem_len = fb->panel->mode.xres * fb->panel->mode.yres * 2; + + fb->board->name = "Device Tree CLCD PL111"; + fb->board->caps = CLCD_CAP_5551 | CLCD_CAP_565; + fb->board->check = clcdfb_check; + fb->board->decode = clcdfb_decode; + + if (of_property_read_u32(node, "use_dma", &use_dma)) + use_dma = 0; + + if (use_dma) { + fb->fb.screen_base = clcdfb_dma_alloc(&fb->dev->dev, + fb->fb.fix.smem_len, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + pr_err("CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->board->mmap = clcdfb_mmap_dma; + fb->board->remove = clcdfb_remove_dma; + } else { + prop = of_get_property(node, "framebuffer", &len); + if (WARN_ON(!prop || len < (na + ns) * sizeof(*prop))) + return -EINVAL; + + fb_base = of_read_number(prop, na); + fb_size = of_read_number(prop + na, ns); + + fb->fb.fix.smem_start = fb_base; + fb->fb.screen_base = ioremap_wc(fb_base, fb_size); + fb->board->mmap = clcdfb_mmap_io; + fb->board->remove = clcdfb_remove_io; + } + + return err; +} +#endif /* CONFIG_OF */ + static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id) { struct clcd_board *board = dev->dev.platform_data; struct clcd_fb *fb; int ret; - if (!board) - return -EINVAL; + if (!board) { +#ifdef CONFIG_OF + if (dev->dev.of_node) { + board = kzalloc(sizeof(struct clcd_board), GFP_KERNEL); + if (!board) + return -ENOMEM; + board->setup = clcdfb_dt_init; + } else +#endif + return -EINVAL; + } ret = amba_request_regions(dev, NULL); if (ret) { diff --git a/drivers/video/arm-hdlcd.c b/drivers/video/arm-hdlcd.c new file mode 100644 index 00000000000..cfd631e3dc5 --- /dev/null +++ b/drivers/video/arm-hdlcd.c @@ -0,0 +1,844 @@ +/* + * drivers/video/arm-hdlcd.c + * + * Copyright (C) 2011 ARM Limited + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * ARM HDLCD Controller + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/fb.h> +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/memblock.h> +#include <linux/arm-hdlcd.h> +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#endif + +#include "edid.h" + +#ifdef CONFIG_SERIAL_AMBA_PCU_UART +int get_edid(u8 *msgbuf); +#else +#endif + +#define to_hdlcd_device(info) container_of(info, struct hdlcd_device, fb) + +static struct of_device_id hdlcd_of_matches[] = { + { .compatible = "arm,hdlcd" }, + {}, +}; + +/* Framebuffer size. */ +static unsigned long framebuffer_size; + +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS +static unsigned long buffer_underrun_events; +static DEFINE_SPINLOCK(hdlcd_underrun_lock); + +static void hdlcd_underrun_set(unsigned long val) +{ + spin_lock(&hdlcd_underrun_lock); + buffer_underrun_events = val; + spin_unlock(&hdlcd_underrun_lock); +} + +static unsigned long hdlcd_underrun_get(void) +{ + unsigned long val; + spin_lock(&hdlcd_underrun_lock); + val = buffer_underrun_events; + spin_unlock(&hdlcd_underrun_lock); + return val; +} + +#ifdef CONFIG_PROC_FS +static int hdlcd_underrun_show(struct seq_file *m, void *v) +{ + unsigned char underrun_string[32]; + snprintf(underrun_string, 32, "%lu\n", hdlcd_underrun_get()); + seq_puts(m, underrun_string); + return 0; +} + +static int proc_hdlcd_underrun_open(struct inode *inode, struct file *file) +{ + return single_open(file, hdlcd_underrun_show, NULL); +} + +static const struct file_operations proc_hdlcd_underrun_operations = { + .open = proc_hdlcd_underrun_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int hdlcd_underrun_init(void) +{ + hdlcd_underrun_set(0); + proc_create("hdlcd_underrun", 0, NULL, &proc_hdlcd_underrun_operations); + return 0; +} +static void hdlcd_underrun_close(void) +{ + remove_proc_entry("hdlcd_underrun", NULL); +} +#else +static int hdlcd_underrun_init(void) { return 0; } +static void hdlcd_underrun_close(void) { } +#endif +#endif + +static char *fb_mode = "1680x1050-32@60\0\0\0\0\0"; + +static struct fb_var_screeninfo cached_var_screeninfo; + +static struct fb_videomode hdlcd_default_mode = { + .refresh = 60, + .xres = 1680, + .yres = 1050, + .pixclock = 8403, + .left_margin = 80, + .right_margin = 48, + .upper_margin = 21, + .lower_margin = 3, + .hsync_len = 32, + .vsync_len = 6, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED +}; + +static inline void hdlcd_enable(struct hdlcd_device *hdlcd) +{ + dev_dbg(hdlcd->dev, "HDLCD: output enabled\n"); + writel(1, hdlcd->base + HDLCD_REG_COMMAND); +} + +static inline void hdlcd_disable(struct hdlcd_device *hdlcd) +{ + dev_dbg(hdlcd->dev, "HDLCD: output disabled\n"); + writel(0, hdlcd->base + HDLCD_REG_COMMAND); +} + +static int hdlcd_set_bitfields(struct hdlcd_device *hdlcd, + struct fb_var_screeninfo *var) +{ + int ret = 0; + + memset(&var->transp, 0, sizeof(var->transp)); + var->red.msb_right = 0; + var->green.msb_right = 0; + var->blue.msb_right = 0; + var->blue.offset = 0; + + switch (var->bits_per_pixel) { + case 8: + /* pseudocolor */ + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + break; + case 16: + /* 565 format */ + var->red.length = 5; + var->green.length = 6; + var->blue.length = 5; + break; + case 32: + var->transp.length = 8; + case 24: + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + break; + default: + ret = -EINVAL; + break; + } + + if (!ret) { + if(var->bits_per_pixel != 32) + { + var->green.offset = var->blue.length; + var->red.offset = var->green.offset + var->green.length; + } + else + { + /* Previously, the byte ordering for 32-bit color was + * (msb)<alpha><red><green><blue>(lsb) + * but this does not match what android expects and + * the colors are odd. Instead, use + * <alpha><blue><green><red> + * Since we tell fb what we are doing, console + * , X and directfb access should work fine. + */ + var->green.offset = var->red.length; + var->blue.offset = var->green.offset + var->green.length; + var->transp.offset = var->blue.offset + var->blue.length; + } + } + + return ret; +} + +static int hdlcd_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + int bytes_per_pixel = var->bits_per_pixel / 8; + +#ifdef HDLCD_NO_VIRTUAL_SCREEN + var->yres_virtual = var->yres; +#else + var->yres_virtual = 2 * var->yres; +#endif + + if ((var->xres_virtual * bytes_per_pixel * var->yres_virtual) > hdlcd->fb.fix.smem_len) + return -ENOMEM; + + if (var->xres > HDLCD_MAX_XRES || var->yres > HDLCD_MAX_YRES) + return -EINVAL; + + /* make sure the bitfields are set appropriately */ + return hdlcd_set_bitfields(hdlcd, var); +} + +/* prototype */ +static int hdlcd_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info); + +#define WRITE_HDLCD_REG(reg, value) writel((value), hdlcd->base + (reg)) +#define READ_HDLCD_REG(reg) readl(hdlcd->base + (reg)) + +static int hdlcd_set_par(struct fb_info *info) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + int bytes_per_pixel = hdlcd->fb.var.bits_per_pixel / 8; + int polarities; + int old_yoffset; + + /* check for shortcuts */ + old_yoffset = cached_var_screeninfo.yoffset; + cached_var_screeninfo.yoffset = info->var.yoffset; + if (!memcmp(&info->var, &cached_var_screeninfo, + sizeof(struct fb_var_screeninfo))) { + if(old_yoffset != info->var.yoffset) { + /* we only changed yoffset, and we already + * already recorded it a couple lines up + */ + hdlcd_pan_display(&info->var, info); + } + /* or no change */ + return 0; + } + + hdlcd->fb.fix.line_length = hdlcd->fb.var.xres * bytes_per_pixel; + + if (hdlcd->fb.var.bits_per_pixel >= 16) + hdlcd->fb.fix.visual = FB_VISUAL_TRUECOLOR; + else + hdlcd->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; + + memcpy(&cached_var_screeninfo, &info->var, sizeof(struct fb_var_screeninfo)); + + polarities = HDLCD_POLARITY_DATAEN | +#ifndef CONFIG_ARCH_TUSCAN + HDLCD_POLARITY_PIXELCLK | +#endif + HDLCD_POLARITY_DATA; + polarities |= (hdlcd->fb.var.sync & FB_SYNC_HOR_HIGH_ACT) ? HDLCD_POLARITY_HSYNC : 0; + polarities |= (hdlcd->fb.var.sync & FB_SYNC_VERT_HIGH_ACT) ? HDLCD_POLARITY_VSYNC : 0; + + hdlcd_disable(hdlcd); + + WRITE_HDLCD_REG(HDLCD_REG_FB_LINE_LENGTH, hdlcd->fb.var.xres * bytes_per_pixel); + WRITE_HDLCD_REG(HDLCD_REG_FB_LINE_PITCH, hdlcd->fb.var.xres * bytes_per_pixel); + WRITE_HDLCD_REG(HDLCD_REG_FB_LINE_COUNT, hdlcd->fb.var.yres - 1); + WRITE_HDLCD_REG(HDLCD_REG_V_SYNC, hdlcd->fb.var.vsync_len - 1); + WRITE_HDLCD_REG(HDLCD_REG_V_BACK_PORCH, hdlcd->fb.var.upper_margin - 1); + WRITE_HDLCD_REG(HDLCD_REG_V_DATA, hdlcd->fb.var.yres - 1); + WRITE_HDLCD_REG(HDLCD_REG_V_FRONT_PORCH, hdlcd->fb.var.lower_margin - 1); + WRITE_HDLCD_REG(HDLCD_REG_H_SYNC, hdlcd->fb.var.hsync_len - 1); + WRITE_HDLCD_REG(HDLCD_REG_H_BACK_PORCH, hdlcd->fb.var.left_margin - 1); + WRITE_HDLCD_REG(HDLCD_REG_H_DATA, hdlcd->fb.var.xres - 1); + WRITE_HDLCD_REG(HDLCD_REG_H_FRONT_PORCH, hdlcd->fb.var.right_margin - 1); + WRITE_HDLCD_REG(HDLCD_REG_POLARITIES, polarities); + WRITE_HDLCD_REG(HDLCD_REG_PIXEL_FORMAT, (bytes_per_pixel - 1) << 3); +#ifdef HDLCD_RED_DEFAULT_COLOUR + WRITE_HDLCD_REG(HDLCD_REG_RED_SELECT, (0x00ff0000 | (hdlcd->fb.var.red.length & 0xf) << 8) \ + | hdlcd->fb.var.red.offset); +#else + WRITE_HDLCD_REG(HDLCD_REG_RED_SELECT, ((hdlcd->fb.var.red.length & 0xf) << 8) | hdlcd->fb.var.red.offset); +#endif + WRITE_HDLCD_REG(HDLCD_REG_GREEN_SELECT, ((hdlcd->fb.var.green.length & 0xf) << 8) | hdlcd->fb.var.green.offset); + WRITE_HDLCD_REG(HDLCD_REG_BLUE_SELECT, ((hdlcd->fb.var.blue.length & 0xf) << 8) | hdlcd->fb.var.blue.offset); + + clk_set_rate(hdlcd->clk, (1000000000 / hdlcd->fb.var.pixclock) * 1000); + clk_enable(hdlcd->clk); + + hdlcd_enable(hdlcd); + + return 0; +} + +static int hdlcd_setcolreg(unsigned int regno, unsigned int red, unsigned int green, + unsigned int blue, unsigned int transp, struct fb_info *info) +{ + if (regno < 16) { + u32 *pal = info->pseudo_palette; + + pal[regno] = ((red >> 8) << info->var.red.offset) | + ((green >> 8) << info->var.green.offset) | + ((blue >> 8) << info->var.blue.offset); + } + + return 0; +} + +static irqreturn_t hdlcd_irq(int irq, void *data) +{ + struct hdlcd_device *hdlcd = data; + unsigned long irq_mask, irq_status; + + irq_mask = READ_HDLCD_REG(HDLCD_REG_INT_MASK); + irq_status = READ_HDLCD_REG(HDLCD_REG_INT_STATUS); + + /* acknowledge interrupt(s) */ + WRITE_HDLCD_REG(HDLCD_REG_INT_CLEAR, irq_status); +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS + if (irq_status & HDLCD_INTERRUPT_UNDERRUN) { + /* increment the count */ + hdlcd_underrun_set(hdlcd_underrun_get() + 1); + } +#endif + if (irq_status & HDLCD_INTERRUPT_VSYNC) { + /* disable future VSYNC interrupts */ + WRITE_HDLCD_REG(HDLCD_REG_INT_MASK, irq_mask & ~HDLCD_INTERRUPT_VSYNC); + + complete(&hdlcd->vsync_completion); + } + + return IRQ_HANDLED; +} + +static int hdlcd_wait_for_vsync(struct fb_info *info) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + unsigned long irq_mask; + int err; + + /* enable VSYNC interrupt */ + irq_mask = READ_HDLCD_REG(HDLCD_REG_INT_MASK); + WRITE_HDLCD_REG(HDLCD_REG_INT_MASK, irq_mask | HDLCD_INTERRUPT_VSYNC); + + err = wait_for_completion_interruptible_timeout(&hdlcd->vsync_completion, + msecs_to_jiffies(100)); + + if (!err) + return -ETIMEDOUT; + + return 0; +} + +static int hdlcd_blank(int blank_mode, struct fb_info *info) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + + switch (blank_mode) { + case FB_BLANK_POWERDOWN: + clk_disable(hdlcd->clk); + case FB_BLANK_NORMAL: + hdlcd_disable(hdlcd); + break; + case FB_BLANK_UNBLANK: + clk_enable(hdlcd->clk); + hdlcd_enable(hdlcd); + break; + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + default: + return 1; + } + + return 0; +} + +static void hdlcd_mmap_open(struct vm_area_struct *vma) +{ +} + +static void hdlcd_mmap_close(struct vm_area_struct *vma) +{ +} + +static struct vm_operations_struct hdlcd_mmap_ops = { + .open = hdlcd_mmap_open, + .close = hdlcd_mmap_close, +}; + +static int hdlcd_mmap(struct fb_info *info, struct vm_area_struct *vma) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + unsigned long off; + unsigned long start; + unsigned long len = hdlcd->fb.fix.smem_len; + + if (vma->vm_end - vma->vm_start == 0) + return 0; + if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) + return -EINVAL; + + off = vma->vm_pgoff << PAGE_SHIFT; + if ((off >= len) || (vma->vm_end - vma->vm_start + off) > len) + return -EINVAL; + + start = hdlcd->fb.fix.smem_start; + off += start; + + vma->vm_pgoff = off >> PAGE_SHIFT; + vma->vm_flags |= VM_IO; + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); + vma->vm_ops = &hdlcd_mmap_ops; + if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) + return -EAGAIN; + + return 0; +} + +static int hdlcd_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct hdlcd_device *hdlcd = to_hdlcd_device(info); + + hdlcd->fb.var.yoffset = var->yoffset; + WRITE_HDLCD_REG(HDLCD_REG_FB_BASE, hdlcd->fb.fix.smem_start + + (var->yoffset * hdlcd->fb.fix.line_length)); + + hdlcd_wait_for_vsync(info); + + return 0; +} + +static int hdlcd_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) +{ + int err; + + switch (cmd) { + case FBIO_WAITFORVSYNC: + err = hdlcd_wait_for_vsync(info); + break; + default: + err = -ENOIOCTLCMD; + break; + } + + return err; +} + +static struct fb_ops hdlcd_ops = { + .owner = THIS_MODULE, + .fb_check_var = hdlcd_check_var, + .fb_set_par = hdlcd_set_par, + .fb_setcolreg = hdlcd_setcolreg, + .fb_blank = hdlcd_blank, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_mmap = hdlcd_mmap, + .fb_pan_display = hdlcd_pan_display, + .fb_ioctl = hdlcd_ioctl, + .fb_compat_ioctl = hdlcd_ioctl +}; + +static int hdlcd_setup(struct hdlcd_device *hdlcd) +{ + u32 version; + int err = -EFAULT; + + hdlcd->fb.device = hdlcd->dev; + + hdlcd->clk = clk_get(hdlcd->dev, NULL); + if (IS_ERR(hdlcd->clk)) { + dev_err(hdlcd->dev, "HDLCD: unable to find clock data\n"); + return PTR_ERR(hdlcd->clk); + } + + err = clk_prepare(hdlcd->clk); + if (err) + goto clk_prepare_err; + + hdlcd->base = ioremap_nocache(hdlcd->fb.fix.mmio_start, hdlcd->fb.fix.mmio_len); + if (!hdlcd->base) { + dev_err(hdlcd->dev, "HDLCD: unable to map registers\n"); + goto remap_err; + } + + hdlcd->fb.pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL); + if (!hdlcd->fb.pseudo_palette) { + dev_err(hdlcd->dev, "HDLCD: unable to allocate pseudo_palette memory\n"); + err = -ENOMEM; + goto kmalloc_err; + } + + version = readl(hdlcd->base + HDLCD_REG_VERSION); + if ((version & HDLCD_PRODUCT_MASK) != HDLCD_PRODUCT_ID) { + dev_err(hdlcd->dev, "HDLCD: unknown product id: 0x%x\n", version); + err = -EINVAL; + goto kmalloc_err; + } + dev_info(hdlcd->dev, "HDLCD: found ARM HDLCD version r%dp%d\n", + (version & HDLCD_VERSION_MAJOR_MASK) >> 8, + version & HDLCD_VERSION_MINOR_MASK); + + strcpy(hdlcd->fb.fix.id, "hdlcd"); + hdlcd->fb.fbops = &hdlcd_ops; + hdlcd->fb.flags = FBINFO_FLAG_DEFAULT/* | FBINFO_VIRTFB*/; + + hdlcd->fb.fix.type = FB_TYPE_PACKED_PIXELS; + hdlcd->fb.fix.type_aux = 0; + hdlcd->fb.fix.xpanstep = 0; + hdlcd->fb.fix.ypanstep = 1; + hdlcd->fb.fix.ywrapstep = 0; + hdlcd->fb.fix.accel = FB_ACCEL_NONE; + + hdlcd->fb.var.nonstd = 0; + hdlcd->fb.var.activate = FB_ACTIVATE_NOW; + hdlcd->fb.var.height = -1; + hdlcd->fb.var.width = -1; + hdlcd->fb.var.accel_flags = 0; + + init_completion(&hdlcd->vsync_completion); + + if (hdlcd->edid) { + /* build modedb from EDID */ + fb_edid_to_monspecs(hdlcd->edid, &hdlcd->fb.monspecs); + fb_videomode_to_modelist(hdlcd->fb.monspecs.modedb, + hdlcd->fb.monspecs.modedb_len, + &hdlcd->fb.modelist); + fb_find_mode(&hdlcd->fb.var, &hdlcd->fb, fb_mode, + hdlcd->fb.monspecs.modedb, + hdlcd->fb.monspecs.modedb_len, + &hdlcd_default_mode, 32); + } else { + hdlcd->fb.monspecs.hfmin = 0; + hdlcd->fb.monspecs.hfmax = 100000; + hdlcd->fb.monspecs.vfmin = 0; + hdlcd->fb.monspecs.vfmax = 400; + hdlcd->fb.monspecs.dclkmin = 1000000; + hdlcd->fb.monspecs.dclkmax = 100000000; + fb_find_mode(&hdlcd->fb.var, &hdlcd->fb, fb_mode, NULL, 0, &hdlcd_default_mode, 32); + } + + dev_info(hdlcd->dev, "using %dx%d-%d@%d mode\n", hdlcd->fb.var.xres, + hdlcd->fb.var.yres, hdlcd->fb.var.bits_per_pixel, + hdlcd->fb.mode ? hdlcd->fb.mode->refresh : 60); + hdlcd->fb.var.xres_virtual = hdlcd->fb.var.xres; +#ifdef HDLCD_NO_VIRTUAL_SCREEN + hdlcd->fb.var.yres_virtual = hdlcd->fb.var.yres; +#else + hdlcd->fb.var.yres_virtual = hdlcd->fb.var.yres * 2; +#endif + + /* initialise and set the palette */ + if (fb_alloc_cmap(&hdlcd->fb.cmap, NR_PALETTE, 0)) { + dev_err(hdlcd->dev, "failed to allocate cmap memory\n"); + err = -ENOMEM; + goto setup_err; + } + fb_set_cmap(&hdlcd->fb.cmap, &hdlcd->fb); + + /* Allow max number of outstanding requests with the largest beat burst */ + WRITE_HDLCD_REG(HDLCD_REG_BUS_OPTIONS, HDLCD_BUS_MAX_OUTSTAND | HDLCD_BUS_BURST_16); + /* Set the framebuffer base to start of allocated memory */ + WRITE_HDLCD_REG(HDLCD_REG_FB_BASE, hdlcd->fb.fix.smem_start); +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS + /* turn on underrun interrupt for counting */ + WRITE_HDLCD_REG(HDLCD_REG_INT_MASK, HDLCD_INTERRUPT_UNDERRUN); +#else + /* Ensure interrupts are disabled */ + WRITE_HDLCD_REG(HDLCD_REG_INT_MASK, 0); +#endif + fb_set_var(&hdlcd->fb, &hdlcd->fb.var); + + if (!register_framebuffer(&hdlcd->fb)) { + return 0; + } + + dev_err(hdlcd->dev, "HDLCD: cannot register framebuffer\n"); + + fb_dealloc_cmap(&hdlcd->fb.cmap); +setup_err: + iounmap(hdlcd->base); +kmalloc_err: + kfree(hdlcd->fb.pseudo_palette); +remap_err: + clk_unprepare(hdlcd->clk); +clk_prepare_err: + clk_put(hdlcd->clk); + return err; +} + +static inline unsigned char atohex(u8 data) +{ + if (!isxdigit(data)) + return 0; + /* truncate the upper nibble and add 9 to non-digit values */ + return (data > 0x39) ? ((data & 0xf) + 9) : (data & 0xf); +} + +/* EDID data is passed from devicetree in a literal string that can contain spaces and + the hexadecimal dump of the data */ +static int parse_edid_data(struct hdlcd_device *hdlcd, const u8 *edid_data, int data_len) +{ + int i, j; + + if (!edid_data) + return -EINVAL; + + hdlcd->edid = kzalloc(EDID_LENGTH, GFP_KERNEL); + if (!hdlcd->edid) + return -ENOMEM; + + for (i = 0, j = 0; i < data_len; i++) { + if (isspace(edid_data[i])) + continue; + hdlcd->edid[j++] = atohex(edid_data[i]); + if (j >= EDID_LENGTH) + break; + } + + if (j < EDID_LENGTH) { + kfree(hdlcd->edid); + hdlcd->edid = NULL; + return -EINVAL; + } + + return 0; +} + +static int hdlcd_probe(struct platform_device *pdev) +{ + int err = 0, i; + struct hdlcd_device *hdlcd; + struct resource *mem; +#ifdef CONFIG_OF + struct device_node *of_node; +#endif + + memset(&cached_var_screeninfo, 0, sizeof(struct fb_var_screeninfo)); + + dev_dbg(&pdev->dev, "HDLCD: probing\n"); + + hdlcd = kzalloc(sizeof(*hdlcd), GFP_KERNEL); + if (!hdlcd) + return -ENOMEM; + +#ifdef CONFIG_OF + of_node = pdev->dev.of_node; + if (of_node) { + int len; + const u8 *edid; + const __be32 *prop = of_get_property(of_node, "mode", &len); + if (prop) + strncpy(fb_mode, (char *)prop, len); + prop = of_get_property(of_node, "framebuffer", &len); + if (prop) { + hdlcd->fb.fix.smem_start = of_read_ulong(prop, + of_n_addr_cells(of_node)); + prop += of_n_addr_cells(of_node); + framebuffer_size = of_read_ulong(prop, + of_n_size_cells(of_node)); + if (framebuffer_size > HDLCD_MAX_FRAMEBUFFER_SIZE) + framebuffer_size = HDLCD_MAX_FRAMEBUFFER_SIZE; + dev_dbg(&pdev->dev, "HDLCD: phys_addr = 0x%lx, size = 0x%lx\n", + hdlcd->fb.fix.smem_start, framebuffer_size); + } + edid = of_get_property(of_node, "edid", &len); + if (edid) { + err = parse_edid_data(hdlcd, edid, len); +#ifdef CONFIG_SERIAL_AMBA_PCU_UART + } else { + /* ask the firmware to fetch the EDID */ + dev_dbg(&pdev->dev, "HDLCD: Requesting EDID data\n"); + hdlcd->edid = kzalloc(EDID_LENGTH, GFP_KERNEL); + if (!hdlcd->edid) + return -ENOMEM; + err = get_edid(hdlcd->edid); +#endif /* CONFIG_SERIAL_AMBA_PCU_UART */ + } + if (err) + dev_info(&pdev->dev, "HDLCD: Failed to parse EDID data\n"); + } +#endif /* CONFIG_OF */ + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "HDLCD: cannot get platform resources\n"); + err = -EINVAL; + goto resource_err; + } + + i = platform_get_irq(pdev, 0); + if (i < 0) { + dev_err(&pdev->dev, "HDLCD: no irq defined for vsync\n"); + err = -ENOENT; + goto resource_err; + } else { + err = request_irq(i, hdlcd_irq, 0, dev_name(&pdev->dev), hdlcd); + if (err) { + dev_err(&pdev->dev, "HDLCD: unable to request irq\n"); + goto resource_err; + } + hdlcd->irq = i; + } + + if (!request_mem_region(mem->start, resource_size(mem), dev_name(&pdev->dev))) { + err = -ENXIO; + goto request_err; + } + + if (!hdlcd->fb.fix.smem_start) { + dev_err(&pdev->dev, "platform did not allocate frame buffer memory\n"); + err = -ENOMEM; + goto memalloc_err; + } + hdlcd->fb.screen_base = ioremap_wc(hdlcd->fb.fix.smem_start, framebuffer_size); + if (!hdlcd->fb.screen_base) { + dev_err(&pdev->dev, "unable to ioremap framebuffer\n"); + err = -ENOMEM; + goto probe_err; + } + + hdlcd->fb.screen_size = framebuffer_size; + hdlcd->fb.fix.smem_len = framebuffer_size; + hdlcd->fb.fix.mmio_start = mem->start; + hdlcd->fb.fix.mmio_len = resource_size(mem); + + /* Clear the framebuffer */ + memset(hdlcd->fb.screen_base, 0, framebuffer_size); + + hdlcd->dev = &pdev->dev; + + dev_dbg(&pdev->dev, "HDLCD: framebuffer virt base %p, phys base 0x%lX\n", + hdlcd->fb.screen_base, (unsigned long)hdlcd->fb.fix.smem_start); + + err = hdlcd_setup(hdlcd); + + if (err) + goto probe_err; + + platform_set_drvdata(pdev, hdlcd); + return 0; + +probe_err: + iounmap(hdlcd->fb.screen_base); + memblock_free(hdlcd->fb.fix.smem_start, hdlcd->fb.fix.smem_start); + +memalloc_err: + release_mem_region(mem->start, resource_size(mem)); + +request_err: + free_irq(hdlcd->irq, hdlcd); + +resource_err: + kfree(hdlcd); + + return err; +} + +static int hdlcd_remove(struct platform_device *pdev) +{ + struct hdlcd_device *hdlcd = platform_get_drvdata(pdev); + + clk_disable(hdlcd->clk); + clk_unprepare(hdlcd->clk); + clk_put(hdlcd->clk); + + /* unmap memory */ + iounmap(hdlcd->fb.screen_base); + iounmap(hdlcd->base); + + /* deallocate fb memory */ + fb_dealloc_cmap(&hdlcd->fb.cmap); + kfree(hdlcd->fb.pseudo_palette); + memblock_free(hdlcd->fb.fix.smem_start, hdlcd->fb.fix.smem_start); + release_mem_region(hdlcd->fb.fix.mmio_start, hdlcd->fb.fix.mmio_len); + + free_irq(hdlcd->irq, NULL); + kfree(hdlcd); + + return 0; +} + +#ifdef CONFIG_PM +static int hdlcd_suspend(struct platform_device *pdev, pm_message_t state) +{ + /* not implemented yet */ + return 0; +} + +static int hdlcd_resume(struct platform_device *pdev) +{ + /* not implemented yet */ + return 0; +} +#else +#define hdlcd_suspend NULL +#define hdlcd_resume NULL +#endif + +static struct platform_driver hdlcd_driver = { + .probe = hdlcd_probe, + .remove = hdlcd_remove, + .suspend = hdlcd_suspend, + .resume = hdlcd_resume, + .driver = { + .name = "hdlcd", + .owner = THIS_MODULE, + .of_match_table = hdlcd_of_matches, + }, +}; + +static int __init hdlcd_init(void) +{ +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS + int err = platform_driver_register(&hdlcd_driver); + if (!err) + hdlcd_underrun_init(); + return err; +#else + return platform_driver_register(&hdlcd_driver); +#endif +} + +void __exit hdlcd_exit(void) +{ +#ifdef HDLCD_COUNT_BUFFERUNDERRUNS + hdlcd_underrun_close(); +#endif + platform_driver_unregister(&hdlcd_driver); +} + +module_init(hdlcd_init); +module_exit(hdlcd_exit); + +MODULE_AUTHOR("Liviu Dudau"); +MODULE_DESCRIPTION("ARM HDLCD core driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/vexpress-dvi.c b/drivers/video/vexpress-dvi.c new file mode 100644 index 00000000000..f08753450ee --- /dev/null +++ b/drivers/video/vexpress-dvi.c @@ -0,0 +1,220 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#define pr_fmt(fmt) "vexpress-dvi: " fmt + +#include <linux/fb.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/vexpress.h> + + +static struct vexpress_config_func *vexpress_dvimode_func; + +static struct { + u32 xres, yres, mode; +} vexpress_dvi_dvimodes[] = { + { 640, 480, 0 }, /* VGA */ + { 800, 600, 1 }, /* SVGA */ + { 1024, 768, 2 }, /* XGA */ + { 1280, 1024, 3 }, /* SXGA */ + { 1600, 1200, 4 }, /* UXGA */ + { 1920, 1080, 5 }, /* HD1080 */ +}; + +static void vexpress_dvi_mode_set(struct fb_info *info, u32 xres, u32 yres) +{ + int err = -ENOENT; + int i; + + if (!vexpress_dvimode_func) + return; + + for (i = 0; i < ARRAY_SIZE(vexpress_dvi_dvimodes); i++) { + if (vexpress_dvi_dvimodes[i].xres == xres && + vexpress_dvi_dvimodes[i].yres == yres) { + pr_debug("mode: %ux%u = %d\n", xres, yres, + vexpress_dvi_dvimodes[i].mode); + err = vexpress_config_write(vexpress_dvimode_func, 0, + vexpress_dvi_dvimodes[i].mode); + break; + } + } + + if (err) + pr_warn("Failed to set %ux%u mode! (%d)\n", xres, yres, err); +} + + +static struct vexpress_config_func *vexpress_muxfpga_func; +static int vexpress_dvi_fb = -1; + +static int vexpress_dvi_mux_set(struct fb_info *info) +{ + int err; + u32 site = vexpress_get_site_by_dev(info->device); + + if (!vexpress_muxfpga_func) + return -ENXIO; + + err = vexpress_config_write(vexpress_muxfpga_func, 0, site); + if (!err) { + pr_debug("Selected MUXFPGA input %d (fb%d)\n", site, + info->node); + vexpress_dvi_fb = info->node; + vexpress_dvi_mode_set(info, info->var.xres, + info->var.yres); + } else { + pr_warn("Failed to select MUXFPGA input %d (fb%d)! (%d)\n", + site, info->node, err); + } + + return err; +} + +static int vexpress_dvi_fb_select(int fb) +{ + int err; + struct fb_info *info; + + /* fb0 is the default */ + if (fb < 0) + fb = 0; + + info = registered_fb[fb]; + if (!info || !lock_fb_info(info)) + return -ENODEV; + + err = vexpress_dvi_mux_set(info); + + unlock_fb_info(info); + + return err; +} + +static ssize_t vexpress_dvi_fb_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", vexpress_dvi_fb); +} + +static ssize_t vexpress_dvi_fb_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + long value; + int err = kstrtol(buf, 0, &value); + + if (!err) + err = vexpress_dvi_fb_select(value); + + return err ? err : count; +} + +DEVICE_ATTR(fb, S_IRUGO | S_IWUSR, vexpress_dvi_fb_show, + vexpress_dvi_fb_store); + + +static int vexpress_dvi_fb_event_notify(struct notifier_block *self, + unsigned long action, void *data) +{ + struct fb_event *event = data; + struct fb_info *info = event->info; + struct fb_videomode *mode = event->data; + + switch (action) { + case FB_EVENT_FB_REGISTERED: + if (vexpress_dvi_fb < 0) + vexpress_dvi_mux_set(info); + break; + case FB_EVENT_MODE_CHANGE: + case FB_EVENT_MODE_CHANGE_ALL: + if (info->node == vexpress_dvi_fb) + vexpress_dvi_mode_set(info, mode->xres, mode->yres); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block vexpress_dvi_fb_notifier = { + .notifier_call = vexpress_dvi_fb_event_notify, +}; +static bool vexpress_dvi_fb_notifier_registered; + + +enum vexpress_dvi_func { FUNC_MUXFPGA, FUNC_DVIMODE }; + +static struct of_device_id vexpress_dvi_of_match[] = { + { + .compatible = "arm,vexpress-muxfpga", + .data = (void *)FUNC_MUXFPGA, + }, { + .compatible = "arm,vexpress-dvimode", + .data = (void *)FUNC_DVIMODE, + }, + {} +}; + +static int vexpress_dvi_probe(struct platform_device *pdev) +{ + enum vexpress_dvi_func func; + const struct of_device_id *match = + of_match_device(vexpress_dvi_of_match, &pdev->dev); + + if (match) + func = (enum vexpress_dvi_func)match->data; + else + func = pdev->id_entry->driver_data; + + switch (func) { + case FUNC_MUXFPGA: + vexpress_muxfpga_func = + vexpress_config_func_get_by_dev(&pdev->dev); + device_create_file(&pdev->dev, &dev_attr_fb); + break; + case FUNC_DVIMODE: + vexpress_dvimode_func = + vexpress_config_func_get_by_dev(&pdev->dev); + break; + } + + if (!vexpress_dvi_fb_notifier_registered) { + fb_register_client(&vexpress_dvi_fb_notifier); + vexpress_dvi_fb_notifier_registered = true; + } + + vexpress_dvi_fb_select(vexpress_dvi_fb); + + return 0; +} + +static const struct platform_device_id vexpress_dvi_id_table[] = { + { .name = "vexpress-muxfpga", .driver_data = FUNC_MUXFPGA, }, + { .name = "vexpress-dvimode", .driver_data = FUNC_DVIMODE, }, + {} +}; + +static struct platform_driver vexpress_dvi_driver = { + .probe = vexpress_dvi_probe, + .driver = { + .name = "vexpress-dvi", + .of_match_table = vexpress_dvi_of_match, + }, + .id_table = vexpress_dvi_id_table, +}; + +static int __init vexpress_dvi_init(void) +{ + return platform_driver_register(&vexpress_dvi_driver); +} +device_initcall(vexpress_dvi_init); diff --git a/include/linux/arm-cci.h b/include/linux/arm-cci.h new file mode 100644 index 00000000000..79d6edf446d --- /dev/null +++ b/include/linux/arm-cci.h @@ -0,0 +1,61 @@ +/* + * CCI cache coherent interconnect support + * + * Copyright (C) 2013 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_ARM_CCI_H +#define __LINUX_ARM_CCI_H + +#include <linux/errno.h> +#include <linux/types.h> + +struct device_node; + +#ifdef CONFIG_ARM_CCI +extern bool cci_probed(void); +extern int cci_ace_get_port(struct device_node *dn); +extern int cci_disable_port_by_cpu(u64 mpidr); +extern int __cci_control_port_by_device(struct device_node *dn, bool enable); +extern int __cci_control_port_by_index(u32 port, bool enable); +#else +static inline bool cci_probed(void) { return false; } +static inline int cci_ace_get_port(struct device_node *dn) +{ + return -ENODEV; +} +static inline int cci_disable_port_by_cpu(u64 mpidr) { return -ENODEV; } +static inline int __cci_control_port_by_device(struct device_node *dn, + bool enable) +{ + return -ENODEV; +} +static inline int __cci_control_port_by_index(u32 port, bool enable) +{ + return -ENODEV; +} +#endif +#define cci_disable_port_by_device(dev) \ + __cci_control_port_by_device(dev, false) +#define cci_enable_port_by_device(dev) \ + __cci_control_port_by_device(dev, true) +#define cci_disable_port_by_index(dev) \ + __cci_control_port_by_index(dev, false) +#define cci_enable_port_by_index(dev) \ + __cci_control_port_by_index(dev, true) + +#endif diff --git a/include/linux/arm-hdlcd.h b/include/linux/arm-hdlcd.h new file mode 100644 index 00000000000..939f3a81d56 --- /dev/null +++ b/include/linux/arm-hdlcd.h @@ -0,0 +1,122 @@ +/* + * include/linux/arm-hdlcd.h + * + * Copyright (C) 2011 ARM Limited + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * ARM HDLCD Controller register definition + */ + +#include <linux/fb.h> +#include <linux/completion.h> + +/* register offsets */ +#define HDLCD_REG_VERSION 0x0000 /* ro */ +#define HDLCD_REG_INT_RAWSTAT 0x0010 /* rw */ +#define HDLCD_REG_INT_CLEAR 0x0014 /* wo */ +#define HDLCD_REG_INT_MASK 0x0018 /* rw */ +#define HDLCD_REG_INT_STATUS 0x001c /* ro */ +#define HDLCD_REG_USER_OUT 0x0020 /* rw */ +#define HDLCD_REG_FB_BASE 0x0100 /* rw */ +#define HDLCD_REG_FB_LINE_LENGTH 0x0104 /* rw */ +#define HDLCD_REG_FB_LINE_COUNT 0x0108 /* rw */ +#define HDLCD_REG_FB_LINE_PITCH 0x010c /* rw */ +#define HDLCD_REG_BUS_OPTIONS 0x0110 /* rw */ +#define HDLCD_REG_V_SYNC 0x0200 /* rw */ +#define HDLCD_REG_V_BACK_PORCH 0x0204 /* rw */ +#define HDLCD_REG_V_DATA 0x0208 /* rw */ +#define HDLCD_REG_V_FRONT_PORCH 0x020c /* rw */ +#define HDLCD_REG_H_SYNC 0x0210 /* rw */ +#define HDLCD_REG_H_BACK_PORCH 0x0214 /* rw */ +#define HDLCD_REG_H_DATA 0x0218 /* rw */ +#define HDLCD_REG_H_FRONT_PORCH 0x021c /* rw */ +#define HDLCD_REG_POLARITIES 0x0220 /* rw */ +#define HDLCD_REG_COMMAND 0x0230 /* rw */ +#define HDLCD_REG_PIXEL_FORMAT 0x0240 /* rw */ +#define HDLCD_REG_BLUE_SELECT 0x0244 /* rw */ +#define HDLCD_REG_GREEN_SELECT 0x0248 /* rw */ +#define HDLCD_REG_RED_SELECT 0x024c /* rw */ + +/* version */ +#define HDLCD_PRODUCT_ID 0x1CDC0000 +#define HDLCD_PRODUCT_MASK 0xFFFF0000 +#define HDLCD_VERSION_MAJOR_MASK 0x0000FF00 +#define HDLCD_VERSION_MINOR_MASK 0x000000FF + +/* interrupts */ +#define HDLCD_INTERRUPT_DMA_END (1 << 0) +#define HDLCD_INTERRUPT_BUS_ERROR (1 << 1) +#define HDLCD_INTERRUPT_VSYNC (1 << 2) +#define HDLCD_INTERRUPT_UNDERRUN (1 << 3) + +/* polarity */ +#define HDLCD_POLARITY_VSYNC (1 << 0) +#define HDLCD_POLARITY_HSYNC (1 << 1) +#define HDLCD_POLARITY_DATAEN (1 << 2) +#define HDLCD_POLARITY_DATA (1 << 3) +#define HDLCD_POLARITY_PIXELCLK (1 << 4) + +/* commands */ +#define HDLCD_COMMAND_DISABLE (0 << 0) +#define HDLCD_COMMAND_ENABLE (1 << 0) + +/* pixel format */ +#define HDLCD_PIXEL_FMT_LITTLE_ENDIAN (0 << 31) +#define HDLCD_PIXEL_FMT_BIG_ENDIAN (1 << 31) +#define HDLCD_BYTES_PER_PIXEL_MASK (3 << 3) + +/* bus options */ +#define HDLCD_BUS_BURST_MASK 0x01f +#define HDLCD_BUS_MAX_OUTSTAND 0xf00 +#define HDLCD_BUS_BURST_NONE (0 << 0) +#define HDLCD_BUS_BURST_1 (1 << 0) +#define HDLCD_BUS_BURST_2 (1 << 1) +#define HDLCD_BUS_BURST_4 (1 << 2) +#define HDLCD_BUS_BURST_8 (1 << 3) +#define HDLCD_BUS_BURST_16 (1 << 4) + +/* Max resolution supported is 4096x4096, 8 bit per color component, + 8 bit alpha, but we are going to choose the usual hardware default + (2048x2048, 32 bpp) and enable double buffering */ +#define HDLCD_MAX_XRES 2048 +#define HDLCD_MAX_YRES 2048 +#define HDLCD_MAX_FRAMEBUFFER_SIZE (HDLCD_MAX_XRES * HDLCD_MAX_YRES << 2) + +#define HDLCD_MEM_BASE (CONFIG_PAGE_OFFSET - 0x1000000) + +#define NR_PALETTE 256 + +/* OEMs using HDLCD may wish to enable these settings if + * display disruption is apparent and you suspect HDLCD + * access to RAM may be starved. + */ +/* Turn HDLCD default color red instead of black so + * that it's easy to see pixel clock data underruns + * (compared to other visual disruption) + */ +//#define HDLCD_RED_DEFAULT_COLOUR +/* Add a counter in the IRQ handler to count buffer underruns + * and /proc/hdlcd_underrun to read the counter + */ +//#define HDLCD_COUNT_BUFFERUNDERRUNS +/* Restrict height to 1x screen size + * + */ +//#define HDLCD_NO_VIRTUAL_SCREEN + +#ifdef CONFIG_ANDROID +#define HDLCD_NO_VIRTUAL_SCREEN +#endif + +struct hdlcd_device { + struct fb_info fb; + struct device *dev; + struct clk *clk; + void __iomem *base; + int irq; + struct completion vsync_completion; + unsigned char *edid; +}; diff --git a/linaro/configs/vexpress-tuning.conf b/linaro/configs/vexpress-tuning.conf new file mode 100644 index 00000000000..adea6cc66de --- /dev/null +++ b/linaro/configs/vexpress-tuning.conf @@ -0,0 +1 @@ +# CONFIG_PROVE_LOCKING is not set diff --git a/linaro/configs/vexpress.conf b/linaro/configs/vexpress.conf new file mode 100644 index 00000000000..94c36e016ad --- /dev/null +++ b/linaro/configs/vexpress.conf @@ -0,0 +1,59 @@ +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VEXPRESS_CA9X4=y +CONFIG_BIG_LITTLE=y +CONFIG_ARCH_VEXPRESS_TC2=y +CONFIG_ARCH_VEXPRESS_DCSCB=y +CONFIG_ARM_VEXPRESS_BL_CPUFREQ=y +CONFIG_PM_OPP=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_INTERACTIVE=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +CONFIG_ARM_PSCI=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_NR_CPUS=8 +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_CMDLINE="console=ttyAMA0,38400n8 root=/dev/mmcblk0p2 rootwait mmci.fmax=4000000" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SMSC911X=y +CONFIG_SMC91X=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FB_ARMHDLCD=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_ARMAACI=y +CONFIG_USB=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_VEXPRESS_CONFIG=y +CONFIG_SENSORS_VEXPRESS=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_VEXPRESS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y |