aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/sound/samsung-i2s.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/samsung-i2s.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/samsung-i2s.txt63
1 files changed, 63 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
new file mode 100644
index 00000000000..3070046da2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
@@ -0,0 +1,63 @@
+* Samsung I2S controller
+
+Required SoC Specific Properties:
+
+- compatible : "samsung,i2s-v5"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- dmas: list of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: identifier string for each DMA request line in the dmas property.
+ These strings correspond 1:1 with the ordered pairs in dmas.
+
+Optional SoC Specific Properties:
+
+- samsung,supports-6ch: If the I2S Primary sound source has 5.1 Channel
+ support, this flag is enabled.
+- samsung,supports-rstclr: This flag should be set if I2S software reset bit
+ control is required. When this flag is set I2S software reset bit will be
+ enabled or disabled based on need.
+- samsung,supports-secdai:If I2S block has a secondary FIFO and internal DMA,
+ then this flag is enabled.
+- samsung,idma-addr: Internal DMA register base address of the audio
+ sub system(used in secondary sound source).
+
+Required Board Specific Properties:
+
+- gpios: The gpio specifier for data out,data in, LRCLK, CDCLK and SCLK
+ interface lines. The format of the gpio specifier depends on the gpio
+ controller.
+ The syntax of samsung gpio specifier is
+ <[phandle of the gpio controller node]
+ [pin number within the gpio controller]
+ [mux function]
+ [flags and pull up/down]
+ [drive strength]>
+
+Example:
+
+- SoC Specific Portion:
+
+i2s@03830000 {
+ compatible = "samsung,i2s-v5";
+ reg = <0x03830000 0x100>;
+ dmas = <&pdma0 10
+ &pdma0 9
+ &pdma0 8>;
+ dma-names = "tx", "rx", "tx-sec";
+ samsung,supports-6ch;
+ samsung,supports-rstclr;
+ samsung,supports-secdai;
+ samsung,idma-addr = <0x03000000>;
+};
+
+- Board Specific Portion:
+
+i2s@03830000 {
+ gpios = <&gpz 0 2 0 0>, /* I2S_0_SCLK */
+ <&gpz 1 2 0 0>, /* I2S_0_CDCLK */
+ <&gpz 2 2 0 0>, /* I2S_0_LRCK */
+ <&gpz 3 2 0 0>, /* I2S_0_SDI */
+ <&gpz 4 2 0 0>, /* I2S_0_SDO[1] */
+ <&gpz 5 2 0 0>, /* I2S_0_SDO[2] */
+ <&gpz 6 2 0 0>; /* I2S_0_SDO[3] */
+};