aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/sound/wm8903.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/wm8903.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/wm8903.txt50
1 files changed, 50 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/wm8903.txt b/Documentation/devicetree/bindings/sound/wm8903.txt
new file mode 100644
index 00000000000..f102cbc4269
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8903.txt
@@ -0,0 +1,50 @@
+WM8903 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+ - compatible : "wlf,wm8903"
+
+ - reg : the I2C address of the device.
+
+ - gpio-controller : Indicates this device is a GPIO controller.
+
+ - #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters (currently unused).
+
+Optional properties:
+
+ - interrupts : The interrupt line the codec is connected to.
+
+ - micdet-cfg : Default register value for R6 (Mic Bias). If absent, the
+ default is 0.
+
+ - micdet-delay : The debounce delay for microphone detection in mS. If
+ absent, the default is 100.
+
+ - gpio-cfg : A list of GPIO configuration register values. The list must
+ be 5 entries long. If absent, no configuration of these registers is
+ performed. If any entry has the value 0xffffffff, that GPIO's
+ configuration will not be modified.
+
+Example:
+
+codec: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupts = < 347 >;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = <
+ 0x0600 /* DMIC_LR, output */
+ 0x0680 /* DMIC_DAT, input */
+ 0x0000 /* GPIO, output, low */
+ 0x0200 /* Interrupt, output */
+ 0x01a0 /* BCLK, input, active high */
+ >;
+};