diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb')
-rw-r--r-- | Documentation/devicetree/bindings/usb/exynos-usb.txt | 50 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/usb/omap-usb.txt | 1 |
2 files changed, 51 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt new file mode 100644 index 00000000000..b3abde73601 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -0,0 +1,50 @@ +Samsung Exynos SoC USB controller + +The USB devices interface with USB controllers on Exynos SOCs. +The device node has following properties. + +EHCI +Required properties: + - compatible: should be "samsung,exynos4210-ehci" for USB 2.0 + EHCI controller in host mode. + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + - clocks: from common clock binding: handle to usb clock. + - clock-names: from common clock binding: Shall be "usbhost". + +Optional properties: + - samsung,vbus-gpio: if present, specifies the GPIO that + needs to be pulled up for the bus to be powered. + +Example: + + usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; + samsung,vbus-gpio = <&gpx2 6 1 3 3>; + + clocks = <&clock 285>; + clock-names = "usbhost"; + }; + +OHCI +Required properties: + - compatible: should be "samsung,exynos4210-ohci" for USB 2.0 + OHCI companion controller in host mode. + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: interrupt number to the cpu. + - clocks: from common clock binding: handle to usb clock. + - clock-names: from common clock binding: Shall be "usbhost". + +Example: + usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; + + clocks = <&clock 285>; + clock-names = "usbhost"; + }; diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 662f0f1d231..d4769f343d6 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -18,6 +18,7 @@ OMAP MUSB GLUE represents PERIPHERAL. - power : Should be "50". This signifies the controller can supply upto 100mA when operating in host mode. + - usb-phy : the phandle for the PHY device Optional properties: - ctrl-module : phandle of the control module this glue uses to write to |