aboutsummaryrefslogtreecommitdiff
path: root/Documentation/sound/alsa/ALSA-Configuration.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound/alsa/ALSA-Configuration.txt')
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt4
1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 181ba5b87ce..9822afb6313 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -322,7 +322,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
"port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
or the value stored in the card's EEPROM for cards that have an EEPROM and
their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
- be choosen freely from the options enumerated above.
+ be chosen freely from the options enumerated above.
If dma2 is specified and different from dma1, the card will operate in
full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
@@ -356,7 +356,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
"port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
or the value stored in the card's EEPROM for cards that have an EEPROM and
their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
- be choosen freely from the options enumerated above.
+ be chosen freely from the options enumerated above.
If dma2 is specified and different from dma1, the card will operate in
full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to