aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/dma/snps-dma.txt70
1 files changed, 36 insertions, 34 deletions
diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
index 5bb3dfb6f1d..d58675ea1ab 100644
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -3,59 +3,61 @@
Required properties:
- compatible: "snps,dma-spear1340"
- reg: Address range of the DMAC registers
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
- interrupt: Should contain the DMAC interrupt number
-- nr_channels: Number of channels supported by hardware
-- is_private: The device channels should be marked as private and not for by the
- general purpose DMA channel allocator. False if not passed.
+- dma-channels: Number of channels supported by hardware
+- dma-requests: Number of DMA request lines supported, up to 16
+- dma-masters: Number of AHB masters supported by the controller
+- #dma-cells: must be <3>
- chan_allocation_order: order of allocation of channel, 0 (default): ascending,
1: descending
- chan_priority: priority of channels. 0 (default): increase from chan 0->n, 1:
increase from chan n->0
- block_size: Maximum block size supported by the controller
-- nr_masters: Number of AHB masters supported by the controller
- data_width: Maximum data width supported by hardware per AHB master
(0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
-- slave_info:
- - bus_id: name of this device channel, not just a device name since
- devices may have more than one channel e.g. "foo_tx". For using the
- dw_generic_filter(), slave drivers must pass exactly this string as
- param to filter function.
- - cfg_hi: Platform-specific initializer for the CFG_HI register
- - cfg_lo: Platform-specific initializer for the CFG_LO register
- - src_master: src master for transfers on allocated channel.
- - dst_master: dest master for transfers on allocated channel.
+
+
+Optional properties:
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- is_private: The device channels should be marked as private and not for by the
+ general purpose DMA channel allocator. False if not passed.
Example:
- dma@fc000000 {
+ dmahost: dma@fc000000 {
compatible = "snps,dma-spear1340";
reg = <0xfc000000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <12>;
- nr_channels = <8>;
+ dma-channels = <8>;
+ dma-requests = <16>;
+ dma-masters = <2>;
+ #dma-cells = <3>;
chan_allocation_order = <1>;
chan_priority = <1>;
block_size = <0xfff>;
- nr_masters = <2>;
data_width = <3 3 0 0>;
+ };
- slave_info {
- uart0-tx {
- bus_id = "uart0-tx";
- cfg_hi = <0x4000>; /* 0x8 << 11 */
- cfg_lo = <0>;
- src_master = <0>;
- dst_master = <1>;
- };
- spi0-tx {
- bus_id = "spi0-tx";
- cfg_hi = <0x2000>; /* 0x4 << 11 */
- cfg_lo = <0>;
- src_master = <0>;
- dst_master = <0>;
- };
- };
+DMA clients connected to the Designware DMA controller must use the format
+described in the dma.txt file, using a four-cell specifier for each channel.
+The four cells in order are:
+
+1. A phandle pointing to the DMA controller
+2. The DMA request line number
+3. Source master for transfers on allocated channel
+4. Destination master for transfers on allocated channel
+
+Example:
+
+ serial@e0000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xe0000000 0x1000>;
+ interrupts = <0 35 0x4>;
+ status = "disabled";
+ dmas = <&dmahost 12 0 1>,
+ <&dmahost 13 0 1 0>;
+ dma-names = "rx", "rx";
};