aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/compressed/head.S5
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi5
-rw-r--r--arch/arm/boot/dts/at91sam9260.dtsi3
-rw-r--r--arch/arm/boot/dts/at91sam9263.dtsi5
-rw-r--r--arch/arm/boot/dts/at91sam9g25ek.dts2
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi5
-rw-r--r--arch/arm/boot/dts/at91sam9n12.dtsi4
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi4
-rw-r--r--arch/arm/boot/dts/imx23.dtsi52
-rw-r--r--arch/arm/boot/dts/imx27-3ds.dts2
-rw-r--r--arch/arm/boot/dts/imx27.dtsi6
-rw-r--r--arch/arm/boot/dts/imx28.dtsi74
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts6
-rw-r--r--arch/arm/boot/dts/imx51.dtsi4
-rw-r--r--arch/arm/boot/dts/imx53-ard.dts22
-rw-r--r--arch/arm/boot/dts/imx53.dtsi7
-rw-r--r--arch/arm/boot/dts/imx6q-sabrelite.dts1
-rw-r--r--arch/arm/boot/dts/imx6q.dtsi7
-rw-r--r--arch/arm/boot/dts/kirkwood-iconnect.dts6
-rw-r--r--arch/arm/boot/dts/twl6030.dtsi3
20 files changed, 153 insertions, 70 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b8c64b80baf..bc67cbff394 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -653,16 +653,21 @@ __armv7_mmu_cache_on:
mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
#endif
mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ bic r0, r0, #1 << 28 @ clear SCTLR.TRE
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x003c @ write buffer
#ifdef CONFIG_MMU
#ifdef CONFIG_CPU_ENDIAN_BE8
orr r0, r0, #1 << 25 @ big-endian page tables
#endif
+ mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg
orrne r0, r0, #1 @ MMU enabled
movne r1, #0xfffffffd @ domain 0 = client
+ bic r6, r6, #1 << 31 @ 32-bit translation system
+ bic r6, r6, #3 << 0 @ use only ttbr0
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
mcrne p15, 0, r1, c3, c0, 0 @ load domain access control
+ mcrne p15, 0, r6, c2, c0, 2 @ load ttb control
#endif
mcr p15, 0, r0, c7, c5, 4 @ ISB
mcr p15, 0, r0, c1, c0, 0 @ load control register
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 59509c48d7e..bd0cff3f808 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -154,5 +154,10 @@
#size-cells = <0>;
ti,hwmods = "i2c3";
};
+
+ wdt2: wdt@44e35000 {
+ compatible = "ti,omap3-wdt";
+ ti,hwmods = "wd_timer2";
+ };
};
};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 66389c1c6f6..7c95f76398d 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -104,6 +104,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioB: gpio@fffff600 {
@@ -113,6 +114,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioC: gpio@fffff800 {
@@ -122,6 +124,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
dbgu: serial@fffff200 {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index b460d6ce9eb..195019b7ca0 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -95,6 +95,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioB: gpio@fffff400 {
@@ -104,6 +105,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioC: gpio@fffff600 {
@@ -113,6 +115,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioD: gpio@fffff800 {
@@ -122,6 +125,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioE: gpio@fffffa00 {
@@ -131,6 +135,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
dbgu: serial@ffffee00 {
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 7829a4d0cb2..96514c134e5 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -15,7 +15,7 @@
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
chosen {
- bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+ bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index bafa8806fc1..63751b1e744 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -113,6 +113,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioB: gpio@fffff400 {
@@ -122,6 +123,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioC: gpio@fffff600 {
@@ -131,6 +133,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioD: gpio@fffff800 {
@@ -140,6 +143,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioE: gpio@fffffa00 {
@@ -149,6 +153,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
dbgu: serial@ffffee00 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index bfac0dfc332..ef9336ae961 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -107,6 +107,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioB: gpio@fffff600 {
@@ -116,6 +117,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioC: gpio@fffff800 {
@@ -125,6 +127,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioD: gpio@fffffa00 {
@@ -134,6 +137,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
dbgu: serial@fffff200 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 4a18c393b13..8a387a8d61b 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -115,6 +115,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioB: gpio@fffff600 {
@@ -124,6 +125,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioC: gpio@fffff800 {
@@ -133,6 +135,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
pioD: gpio@fffffa00 {
@@ -142,6 +145,7 @@
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
};
dbgu: serial@fffff200 {
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index a874dbfb5ae..e6138310e5c 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -51,11 +51,11 @@
dma-apbh@80004000 {
compatible = "fsl,imx23-dma-apbh";
- reg = <0x80004000 2000>;
+ reg = <0x80004000 0x2000>;
};
ecc@80008000 {
- reg = <0x80008000 2000>;
+ reg = <0x80008000 0x2000>;
status = "disabled";
};
@@ -63,7 +63,7 @@
compatible = "fsl,imx23-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch";
@@ -72,14 +72,14 @@
};
ssp0: ssp@80010000 {
- reg = <0x80010000 2000>;
+ reg = <0x80010000 0x2000>;
interrupts = <15 14>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
etm@80014000 {
- reg = <0x80014000 2000>;
+ reg = <0x80014000 0x2000>;
status = "disabled";
};
@@ -87,7 +87,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx23-pinctrl", "simple-bus";
- reg = <0x80018000 2000>;
+ reg = <0x80018000 0x2000>;
gpio0: gpio@0 {
compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
@@ -273,32 +273,32 @@
};
emi@80020000 {
- reg = <0x80020000 2000>;
+ reg = <0x80020000 0x2000>;
status = "disabled";
};
dma-apbx@80024000 {
compatible = "fsl,imx23-dma-apbx";
- reg = <0x80024000 2000>;
+ reg = <0x80024000 0x2000>;
};
dcp@80028000 {
- reg = <0x80028000 2000>;
+ reg = <0x80028000 0x2000>;
status = "disabled";
};
pxp@8002a000 {
- reg = <0x8002a000 2000>;
+ reg = <0x8002a000 0x2000>;
status = "disabled";
};
ocotp@8002c000 {
- reg = <0x8002c000 2000>;
+ reg = <0x8002c000 0x2000>;
status = "disabled";
};
axi-ahb@8002e000 {
- reg = <0x8002e000 2000>;
+ reg = <0x8002e000 0x2000>;
status = "disabled";
};
@@ -310,14 +310,14 @@
};
ssp1: ssp@80034000 {
- reg = <0x80034000 2000>;
+ reg = <0x80034000 0x2000>;
interrupts = <2 20>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
tvenc@80038000 {
- reg = <0x80038000 2000>;
+ reg = <0x80038000 0x2000>;
status = "disabled";
};
};
@@ -330,37 +330,37 @@
ranges;
clkctl@80040000 {
- reg = <0x80040000 2000>;
+ reg = <0x80040000 0x2000>;
status = "disabled";
};
saif0: saif@80042000 {
- reg = <0x80042000 2000>;
+ reg = <0x80042000 0x2000>;
status = "disabled";
};
power@80044000 {
- reg = <0x80044000 2000>;
+ reg = <0x80044000 0x2000>;
status = "disabled";
};
saif1: saif@80046000 {
- reg = <0x80046000 2000>;
+ reg = <0x80046000 0x2000>;
status = "disabled";
};
audio-out@80048000 {
- reg = <0x80048000 2000>;
+ reg = <0x80048000 0x2000>;
status = "disabled";
};
audio-in@8004c000 {
- reg = <0x8004c000 2000>;
+ reg = <0x8004c000 0x2000>;
status = "disabled";
};
lradc@80050000 {
- reg = <0x80050000 2000>;
+ reg = <0x80050000 0x2000>;
status = "disabled";
};
@@ -370,26 +370,26 @@
};
i2c@80058000 {
- reg = <0x80058000 2000>;
+ reg = <0x80058000 0x2000>;
status = "disabled";
};
rtc@8005c000 {
compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
- reg = <0x8005c000 2000>;
+ reg = <0x8005c000 0x2000>;
interrupts = <22>;
};
pwm: pwm@80064000 {
compatible = "fsl,imx23-pwm";
- reg = <0x80064000 2000>;
+ reg = <0x80064000 0x2000>;
#pwm-cells = <2>;
fsl,pwm-number = <5>;
status = "disabled";
};
timrot@80068000 {
- reg = <0x80068000 2000>;
+ reg = <0x80068000 0x2000>;
status = "disabled";
};
@@ -429,7 +429,7 @@
ranges;
usbctrl@80080000 {
- reg = <0x80080000 0x10000>;
+ reg = <0x80080000 0x40000>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts
index d3f8296e19e..0a8978a40ec 100644
--- a/arch/arm/boot/dts/imx27-3ds.dts
+++ b/arch/arm/boot/dts/imx27-3ds.dts
@@ -27,7 +27,7 @@
status = "okay";
};
- uart@1000a000 {
+ uart1: serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 00bae3aad5a..5303ab680a3 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -19,6 +19,12 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
};
avic: avic-interrupt-controller@e0000000 {
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 787efac68da..3fa6d190fab 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -57,18 +57,18 @@
};
hsadc@80002000 {
- reg = <0x80002000 2000>;
+ reg = <0x80002000 0x2000>;
interrupts = <13 87>;
status = "disabled";
};
dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
- reg = <0x80004000 2000>;
+ reg = <0x80004000 0x2000>;
};
perfmon@80006000 {
- reg = <0x80006000 800>;
+ reg = <0x80006000 0x800>;
interrupts = <27>;
status = "disabled";
};
@@ -77,7 +77,7 @@
compatible = "fsl,imx28-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
@@ -86,28 +86,28 @@
};
ssp0: ssp@80010000 {
- reg = <0x80010000 2000>;
+ reg = <0x80010000 0x2000>;
interrupts = <96 82>;
fsl,ssp-dma-channel = <0>;
status = "disabled";
};
ssp1: ssp@80012000 {
- reg = <0x80012000 2000>;
+ reg = <0x80012000 0x2000>;
interrupts = <97 83>;
fsl,ssp-dma-channel = <1>;
status = "disabled";
};
ssp2: ssp@80014000 {
- reg = <0x80014000 2000>;
+ reg = <0x80014000 0x2000>;
interrupts = <98 84>;
fsl,ssp-dma-channel = <2>;
status = "disabled";
};
ssp3: ssp@80016000 {
- reg = <0x80016000 2000>;
+ reg = <0x80016000 0x2000>;
interrupts = <99 85>;
fsl,ssp-dma-channel = <3>;
status = "disabled";
@@ -117,7 +117,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-pinctrl", "simple-bus";
- reg = <0x80018000 2000>;
+ reg = <0x80018000 0x2000>;
gpio0: gpio@0 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
@@ -510,96 +510,96 @@
};
digctl@8001c000 {
- reg = <0x8001c000 2000>;
+ reg = <0x8001c000 0x2000>;
interrupts = <89>;
status = "disabled";
};
etm@80022000 {
- reg = <0x80022000 2000>;
+ reg = <0x80022000 0x2000>;
status = "disabled";
};
dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
- reg = <0x80024000 2000>;
+ reg = <0x80024000 0x2000>;
};
dcp@80028000 {
- reg = <0x80028000 2000>;
+ reg = <0x80028000 0x2000>;
interrupts = <52 53 54>;
status = "disabled";
};
pxp@8002a000 {
- reg = <0x8002a000 2000>;
+ reg = <0x8002a000 0x2000>;
interrupts = <39>;
status = "disabled";
};
ocotp@8002c000 {
- reg = <0x8002c000 2000>;
+ reg = <0x8002c000 0x2000>;
status = "disabled";
};
axi-ahb@8002e000 {
- reg = <0x8002e000 2000>;
+ reg = <0x8002e000 0x2000>;
status = "disabled";
};
lcdif@80030000 {
compatible = "fsl,imx28-lcdif";
- reg = <0x80030000 2000>;
+ reg = <0x80030000 0x2000>;
interrupts = <38 86>;
status = "disabled";
};
can0: can@80032000 {
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
- reg = <0x80032000 2000>;
+ reg = <0x80032000 0x2000>;
interrupts = <8>;
status = "disabled";
};
can1: can@80034000 {
compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
- reg = <0x80034000 2000>;
+ reg = <0x80034000 0x2000>;
interrupts = <9>;
status = "disabled";
};
simdbg@8003c000 {
- reg = <0x8003c000 200>;
+ reg = <0x8003c000 0x200>;
status = "disabled";
};
simgpmisel@8003c200 {
- reg = <0x8003c200 100>;
+ reg = <0x8003c200 0x100>;
status = "disabled";
};
simsspsel@8003c300 {
- reg = <0x8003c300 100>;
+ reg = <0x8003c300 0x100>;
status = "disabled";
};
simmemsel@8003c400 {
- reg = <0x8003c400 100>;
+ reg = <0x8003c400 0x100>;
status = "disabled";
};
gpiomon@8003c500 {
- reg = <0x8003c500 100>;
+ reg = <0x8003c500 0x100>;
status = "disabled";
};
simenet@8003c700 {
- reg = <0x8003c700 100>;
+ reg = <0x8003c700 0x100>;
status = "disabled";
};
armjtag@8003c800 {
- reg = <0x8003c800 100>;
+ reg = <0x8003c800 0x100>;
status = "disabled";
};
};
@@ -612,45 +612,45 @@
ranges;
clkctl@80040000 {
- reg = <0x80040000 2000>;
+ reg = <0x80040000 0x2000>;
status = "disabled";
};
saif0: saif@80042000 {
compatible = "fsl,imx28-saif";
- reg = <0x80042000 2000>;
+ reg = <0x80042000 0x2000>;
interrupts = <59 80>;
fsl,saif-dma-channel = <4>;
status = "disabled";
};
power@80044000 {
- reg = <0x80044000 2000>;
+ reg = <0x80044000 0x2000>;
status = "disabled";
};
saif1: saif@80046000 {
compatible = "fsl,imx28-saif";
- reg = <0x80046000 2000>;
+ reg = <0x80046000 0x2000>;
interrupts = <58 81>;
fsl,saif-dma-channel = <5>;
status = "disabled";
};
lradc@80050000 {
- reg = <0x80050000 2000>;
+ reg = <0x80050000 0x2000>;
status = "disabled";
};
spdif@80054000 {
- reg = <0x80054000 2000>;
+ reg = <0x80054000 0x2000>;
interrupts = <45 66>;
status = "disabled";
};
rtc@80056000 {
compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
- reg = <0x80056000 2000>;
+ reg = <0x80056000 0x2000>;
interrupts = <29>;
};
@@ -658,7 +658,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
- reg = <0x80058000 2000>;
+ reg = <0x80058000 0x2000>;
interrupts = <111 68>;
clock-frequency = <100000>;
status = "disabled";
@@ -668,7 +668,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
- reg = <0x8005a000 2000>;
+ reg = <0x8005a000 0x2000>;
interrupts = <110 69>;
clock-frequency = <100000>;
status = "disabled";
@@ -676,14 +676,14 @@
pwm: pwm@80064000 {
compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
- reg = <0x80064000 2000>;
+ reg = <0x80064000 0x2000>;
#pwm-cells = <2>;
fsl,pwm-number = <8>;
status = "disabled";
};
timrot@80068000 {
- reg = <0x80068000 2000>;
+ reg = <0x80068000 0x2000>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index de065b5976e..59d9789e550 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -25,8 +25,8 @@
aips@70000000 { /* aips-1 */
spba@70000000 {
esdhc@70004000 { /* ESDHC1 */
- fsl,cd-internal;
- fsl,wp-internal;
+ fsl,cd-controller;
+ fsl,wp-controller;
status = "okay";
};
@@ -53,7 +53,7 @@
spi-max-frequency = <6000000>;
reg = <0>;
interrupt-parent = <&gpio1>;
- interrupts = <8>;
+ interrupts = <8 0x4>;
regulators {
sw1_reg: sw1 {
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 53cbaa3d4f9..aba28dc87fc 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -17,6 +17,10 @@
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
};
tzic: tz-interrupt-controller@e0000000 {
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 5b8eafcdbee..da895e93a99 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -64,12 +64,32 @@
reg = <0xf4000000 0x2000000>;
phy-mode = "mii";
interrupt-parent = <&gpio2>;
- interrupts = <31>;
+ interrupts = <31 0x8>;
reg-io-width = <4>;
+ /*
+ * VDD33A and VDDVARIO of LAN9220 are supplied by
+ * SW4_3V3 of LTC3589. Before the regulator driver
+ * for this PMIC is available, we use a fixed dummy
+ * 3V3 regulator to get LAN9220 driver probing work.
+ */
+ vdd33a-supply = <&reg_3p3v>;
+ vddvario-supply = <&reg_3p3v>;
smsc,irq-push-pull;
};
};
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index fc79cdc4b4e..cd37165edce 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -19,6 +19,13 @@
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
};
tzic: tz-interrupt-controller@0fffc000 {
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index d42e851ceb9..72f30f3e617 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -53,6 +53,7 @@
fsl,pins = <
144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */
121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+ 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */
>;
};
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 3d3c64b014e..fd57079f71a 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -19,6 +19,13 @@
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
};
cpus {
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 52d94704510..f8ca6fa8819 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -41,9 +41,13 @@
};
power-blue {
label = "power:blue";
- gpios = <&gpio1 11 0>;
+ gpios = <&gpio1 10 0>;
linux,default-trigger = "timer";
};
+ power-red {
+ label = "power:red";
+ gpios = <&gpio1 11 0>;
+ };
usb1 {
label = "usb1:blue";
gpios = <&gpio1 12 0>;
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 3b2f3510d7e..d351b27d721 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -66,6 +66,7 @@
vcxio: regulator@8 {
compatible = "ti,twl6030-vcxio";
+ regulator-always-on;
};
vusb: regulator@9 {
@@ -74,10 +75,12 @@
v1v8: regulator@10 {
compatible = "ti,twl6030-v1v8";
+ regulator-always-on;
};
v2v1: regulator@11 {
compatible = "ti,twl6030-v2v1";
+ regulator-always-on;
};
clk32kg: regulator@12 {
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-19 12:18:49 +0000