aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/sleep44xx.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/sleep44xx.S')
-rw-r--r--arch/arm/mach-omap2/sleep44xx.S379
1 files changed, 379 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
new file mode 100644
index 00000000000..abd28340049
--- /dev/null
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -0,0 +1,379 @@
+/*
+ * OMAP44xx sleep code.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/system.h>
+#include <asm/smp_scu.h>
+#include <asm/memory.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <plat/omap44xx.h>
+#include <mach/omap-secure.h>
+
+#include "common.h"
+#include "omap4-sar-layout.h"
+
+#if defined(CONFIG_SMP) && defined(CONFIG_PM)
+
+.macro DO_SMC
+ dsb
+ smc #0
+ dsb
+.endm
+
+ppa_zero_params:
+ .word 0x0
+
+ppa_por_params:
+ .word 1, 0
+
+/*
+ * =============================
+ * == CPU suspend finisher ==
+ * =============================
+ *
+ * void omap4_finish_suspend(unsigned long cpu_state)
+ *
+ * This function code saves the CPU context and performs the CPU
+ * power down sequence. Calling WFI effectively changes the CPU
+ * power domains states to the desired target power state.
+ *
+ * @cpu_state : contains context save state (r0)
+ * 0 - No context lost
+ * 1 - CPUx L1 and logic lost: MPUSS CSWR
+ * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
+ * 3 - CPUx L1 and logic lost + GIC + L2 lost: MPUSS OFF
+ * @return: This function never returns for CPU OFF and DORMANT power states.
+ * Post WFI, CPU transitions to DORMANT or OFF power state and on wake-up
+ * from this follows a full CPU reset path via ROM code to CPU restore code.
+ * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
+ * It returns to the caller for CPU INACTIVE and ON power states or in case
+ * CPU failed to transition to targeted OFF/DORMANT state.
+ */
+ENTRY(omap4_finish_suspend)
+ stmfd sp!, {lr}
+ cmp r0, #0x0
+ beq do_WFI @ No lowpower state, jump to WFI
+
+ /*
+ * Flush all data from the L1 data cache before disabling
+ * SCTLR.C bit.
+ */
+ bl omap4_get_sar_ram_base
+ ldr r9, [r0, #OMAP_TYPE_OFFSET]
+ cmp r9, #0x1 @ Check for HS device
+ bne skip_secure_l1_clean
+ mov r0, #SCU_PM_NORMAL
+ mov r1, #0xFF @ clean seucre L1
+ stmfd r13!, {r4-r12, r14}
+ ldr r12, =OMAP4_MON_SCU_PWR_INDEX
+ DO_SMC
+ ldmfd r13!, {r4-r12, r14}
+skip_secure_l1_clean:
+ bl v7_flush_dcache_all
+
+ /*
+ * Clear the SCTLR.C bit to prevent further data cache
+ * allocation. Clearing SCTLR.C would make all the data accesses
+ * strongly ordered and would not hit the cache.
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #(1 << 2) @ Disable the C bit
+ mcr p15, 0, r0, c1, c0, 0
+ isb
+
+ /*
+ * Invalidate L1 data cache. Even though only invalidate is
+ * necessary exported flush API is used here. Doing clean
+ * on already clean cache would be almost NOP.
+ */
+ bl v7_flush_dcache_all
+
+ /*
+ * Switch the CPU from Symmetric Multiprocessing (SMP) mode
+ * to AsymmetricMultiprocessing (AMP) mode by programming
+ * the SCU power status to DORMANT or OFF mode.
+ * This enables the CPU to be taken out of coherency by
+ * preventing the CPU from receiving cache, TLB, or BTB
+ * maintenance operations broadcast by other CPUs in the cluster.
+ */
+ bl omap4_get_sar_ram_base
+ mov r8, r0
+ ldr r9, [r8, #OMAP_TYPE_OFFSET]
+ cmp r9, #0x1 @ Check for HS device
+ bne scu_gp_set
+ mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR
+ ands r0, r0, #0x0f
+ ldreq r0, [r8, #SCU_OFFSET0]
+ ldrne r0, [r8, #SCU_OFFSET1]
+ mov r1, #0x00
+ stmfd r13!, {r4-r12, r14}
+ ldr r12, =OMAP4_MON_SCU_PWR_INDEX
+ DO_SMC
+ ldmfd r13!, {r4-r12, r14}
+ b skip_scu_gp_set
+scu_gp_set:
+ mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR
+ ands r0, r0, #0x0f
+ ldreq r1, [r8, #SCU_OFFSET0]
+ ldrne r1, [r8, #SCU_OFFSET1]
+ bl omap4_get_scu_base
+ bl scu_power_mode
+skip_scu_gp_set:
+ mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data
+ tst r0, #(1 << 18)
+ mrcne p15, 0, r0, c1, c0, 1
+ bicne r0, r0, #(1 << 6) @ Disable SMP bit
+ mcrne p15, 0, r0, c1, c0, 1
+ isb
+ dsb
+#ifdef CONFIG_CACHE_L2X0
+ /*
+ * Clean and invalidate the L2 cache.
+ * Common cache-l2x0.c functions can't be used here since it
+ * uses spinlocks. We are out of coherency here with data cache
+ * disabled. The spinlock implementation uses exclusive load/store
+ * instruction which can fail without data cache being enabled.
+ * OMAP4 hardware doesn't support exclusive monitor which can
+ * overcome exclusive access issue. Because of this, CPU can
+ * lead to deadlock.
+ */
+ bl omap4_get_sar_ram_base
+ mov r8, r0
+ mrc p15, 0, r5, c0, c0, 5 @ Read MPIDR
+ ands r5, r5, #0x0f
+ ldreq r0, [r8, #L2X0_SAVE_OFFSET0] @ Retrieve L2 state from SAR
+ ldrne r0, [r8, #L2X0_SAVE_OFFSET1] @ memory.
+ cmp r0, #3
+ bne do_WFI
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x03
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ DO_SMC
+#endif
+ bl omap4_get_l2cache_base
+ mov r2, r0
+ ldr r0, =0xffff
+ str r0, [r2, #L2X0_CLEAN_INV_WAY]
+wait:
+ ldr r0, [r2, #L2X0_CLEAN_INV_WAY]
+ ldr r1, =0xffff
+ ands r0, r0, r1
+ bne wait
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x00
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ DO_SMC
+#endif
+l2x_sync:
+ bl omap4_get_l2cache_base
+ mov r2, r0
+ mov r0, #0x0
+ str r0, [r2, #L2X0_CACHE_SYNC]
+sync:
+ ldr r0, [r2, #L2X0_CACHE_SYNC]
+ ands r0, r0, #0x1
+ bne sync
+#endif
+
+do_WFI:
+ bl omap_do_wfi
+
+ /*
+ * CPU is here when it failed to enter OFF/DORMANT or
+ * no low power state was attempted.
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ tst r0, #(1 << 2) @ Check C bit enabled?
+ orreq r0, r0, #(1 << 2) @ Enable the C bit
+ mcreq p15, 0, r0, c1, c0, 0
+ isb
+
+ /*
+ * Ensure the CPU power state is set to NORMAL in
+ * SCU power state so that CPU is back in coherency.
+ * In non-coherent mode CPU can lock-up and lead to
+ * system deadlock.
+ */
+ mrc p15, 0, r0, c1, c0, 1
+ tst r0, #(1 << 6) @ Check SMP bit enabled?
+ orreq r0, r0, #(1 << 6)
+ mcreq p15, 0, r0, c1, c0, 1
+ isb
+ bl omap4_get_sar_ram_base
+ mov r8, r0
+ ldr r9, [r8, #OMAP_TYPE_OFFSET]
+ cmp r9, #0x1 @ Check for HS device
+ bne scu_gp_clear
+ mov r0, #SCU_PM_NORMAL
+ mov r1, #0x00
+ stmfd r13!, {r4-r12, r14}
+ ldr r12, =OMAP4_MON_SCU_PWR_INDEX
+ DO_SMC
+ ldmfd r13!, {r4-r12, r14}
+ b skip_scu_gp_clear
+scu_gp_clear:
+ bl omap4_get_scu_base
+ mov r1, #SCU_PM_NORMAL
+ bl scu_power_mode
+skip_scu_gp_clear:
+ isb
+ dsb
+ ldmfd sp!, {pc}
+ENDPROC(omap4_finish_suspend)
+
+/*
+ * ============================
+ * == CPU resume entry point ==
+ * ============================
+ *
+ * void omap4_cpu_resume(void)
+ *
+ * ROM code jumps to this function while waking up from CPU
+ * OFF or DORMANT state. Physical address of the function is
+ * stored in the SAR RAM while entering to OFF or DORMANT mode.
+ * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
+ */
+ENTRY(omap4_cpu_resume)
+ /*
+ * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
+ * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA
+ * init and for CPU1, a secure PPA API provided. CPU0 must be ON
+ * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+.
+ * OMAP443X GP devices- SMP bit isn't accessible.
+ * OMAP446X GP devices - SMP bit access is enabled on both CPUs.
+ */
+ ldr r8, =OMAP44XX_SAR_RAM_BASE
+ ldr r9, [r8, #OMAP_TYPE_OFFSET]
+ cmp r9, #0x1 @ Skip if GP device
+ bne skip_ns_smp_enable
+ mrc p15, 0, r0, c0, c0, 5
+ ands r0, r0, #0x0f
+ beq skip_ns_smp_enable
+ppa_actrl_retry:
+ mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX
+ adr r3, ppa_zero_params @ Pointer to parameters
+ mov r1, #0x0 @ Process ID
+ mov r2, #0x4 @ Flag
+ mov r6, #0xff
+ mov r12, #0x00 @ Secure Service ID
+ DO_SMC
+ cmp r0, #0x0 @ API returns 0 on success.
+ beq enable_smp_bit
+ b ppa_actrl_retry
+enable_smp_bit:
+ mrc p15, 0, r0, c1, c0, 1
+ tst r0, #(1 << 6) @ Check SMP bit enabled?
+ orreq r0, r0, #(1 << 6)
+ mcreq p15, 0, r0, c1, c0, 1
+ isb
+skip_ns_smp_enable:
+#ifdef CONFIG_CACHE_L2X0
+ /*
+ * Restore the L2 AUXCTRL and enable the L2 cache.
+ * OMAP4_MON_L2X0_AUXCTRL_INDEX = Program the L2X0 AUXCTRL
+ * OMAP4_MON_L2X0_CTRL_INDEX = Enable the L2 using L2X0 CTRL
+ * register r0 contains value to be programmed.
+ * L2 cache is already invalidate by ROM code as part
+ * of MPUSS OFF wakeup path.
+ */
+ ldr r2, =OMAP44XX_L2CACHE_BASE
+ ldr r0, [r2, #L2X0_CTRL]
+ and r0, #0x0f
+ cmp r0, #1
+ beq skip_l2en @ Skip if already enabled
+ ldr r3, =OMAP44XX_SAR_RAM_BASE
+ ldr r1, [r3, #OMAP_TYPE_OFFSET]
+ cmp r1, #0x1 @ Check for HS device
+ bne set_gp_por
+ ldr r0, =OMAP4_PPA_L2_POR_INDEX
+ ldr r1, =OMAP44XX_SAR_RAM_BASE
+ ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
+ adr r3, ppa_por_params
+ str r4, [r3, #0x04]
+ mov r1, #0x0 @ Process ID
+ mov r2, #0x4 @ Flag
+ mov r6, #0xff
+ mov r12, #0x00 @ Secure Service ID
+ DO_SMC
+ b set_aux_ctrl
+set_gp_por:
+ ldr r1, =OMAP44XX_SAR_RAM_BASE
+ ldr r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
+ ldr r12, =OMAP4_MON_L2X0_PREFETCH_INDEX @ Setup L2 PREFETCH
+ DO_SMC
+set_aux_ctrl:
+ ldr r1, =OMAP44XX_SAR_RAM_BASE
+ ldr r0, [r1, #L2X0_AUXCTRL_OFFSET]
+ ldr r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX @ Setup L2 AUXCTRL
+ DO_SMC
+ mov r0, #0x1
+ ldr r12, =OMAP4_MON_L2X0_CTRL_INDEX @ Enable L2 cache
+ DO_SMC
+skip_l2en:
+#endif
+
+ b cpu_resume @ Jump to generic resume
+ENDPROC(omap4_cpu_resume)
+#endif
+
+#ifndef CONFIG_OMAP4_ERRATA_I688
+ENTRY(omap_bus_sync)
+ mov pc, lr
+ENDPROC(omap_bus_sync)
+#endif
+
+ENTRY(omap_do_wfi)
+ stmfd sp!, {lr}
+ /* Drain interconnect write buffers. */
+ bl omap_bus_sync
+
+ /*
+ * Execute an ISB instruction to ensure that all of the
+ * CP15 register changes have been committed.
+ */
+ isb
+
+ /*
+ * Execute a barrier instruction to ensure that all cache,
+ * TLB and branch predictor maintenance operations issued
+ * by any CPU in the cluster have completed.
+ */
+ dsb
+ dmb
+
+ /*
+ * Execute a WFI instruction and wait until the
+ * STANDBYWFI output is asserted to indicate that the
+ * CPU is in idle and low power state. CPU can specualatively
+ * prefetch the instructions so add NOPs after WFI. Sixteen
+ * NOPs as per Cortex-A9 pipeline.
+ */
+ wfi @ Wait For Interrupt
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ ldmfd sp!, {pc}
+ENDPROC(omap_do_wfi)