diff options
Diffstat (limited to 'arch/arm/mach-omap2')
28 files changed, 265 insertions, 546 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b068b7fe99e..62bb352c2d3 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,7 +229,6 @@ obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o -obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o @@ -255,8 +254,6 @@ obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o -obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o - obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index cb0596b631c..244d8a5aa54 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -38,7 +38,7 @@ #include "gpmc-smc91x.h" #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-data.h> #include "mux.h" #include "hsmmc.h" @@ -108,24 +108,13 @@ static struct platform_device *sdp2430_devices[] __initdata = { #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 #define SDP2430_LCD_PANEL_ENABLE_GPIO 154 -static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1); - gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1); - - return 0; -} - -static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0); - gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0); -} - static struct panel_generic_dpi_data sdp2430_panel_data = { .name = "nec_nl2432dr22-11b", - .platform_enable = sdp2430_panel_enable_lcd, - .platform_disable = sdp2430_panel_disable_lcd, + .num_gpios = 2, + .gpios = { + SDP2430_LCD_PANEL_ENABLE_GPIO, + SDP2430_LCD_PANEL_BACKLIGHT_GPIO, + }, }; static struct omap_dss_device sdp2430_lcd_device = { @@ -146,26 +135,6 @@ static struct omap_dss_board_info sdp2430_dss_data = { .default_device = &sdp2430_lcd_device, }; -static void __init sdp2430_display_init(void) -{ - int r; - - static struct gpio gpios[] __initdata = { - { SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, - "LCD reset" }, - { SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, - "LCD Backlight" }, - }; - - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - return; - } - - omap_display_init(&sdp2430_dss_data); -} - #if IS_ENABLED(CONFIG_SMC91X) static struct omap_smc91x_platform_data board_smc91x_data = { @@ -273,7 +242,7 @@ static void __init omap_2430sdp_init(void) gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW, "Secondary LCD backlight"); - sdp2430_display_init(); + omap_display_init(&sdp2430_dss_data); } MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 7eb9651dd0f..23b004afa3f 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -35,7 +35,7 @@ #include "common.h" #include <linux/omap-dma.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "gpmc.h" #include "gpmc-smc91x.h" @@ -108,53 +108,38 @@ static struct twl4030_keypad_data sdp3430_kp_data = { #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 -static struct gpio sdp3430_dss_gpios[] __initdata = { - {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" }, - {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, -}; - static void __init sdp3430_display_init(void) { int r; - r = gpio_request_array(sdp3430_dss_gpios, - ARRAY_SIZE(sdp3430_dss_gpios)); + /* + * the backlight GPIO doesn't directly go to the panel, it enables + * an internal circuit on 3430sdp to create the signal V_BKL_28V, + * this is connected to LED+ pin of the sharp panel. This GPIO + * is left enabled in the board file, and not passed to the panel + * as platform_data. + */ + r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, + GPIOF_OUT_INIT_HIGH, "LCD Backlight"); if (r) - printk(KERN_ERR "failed to get LCD control GPIOs\n"); - -} + pr_err("failed to get LCD Backlight GPIO\n"); -static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); - gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); - - return 0; -} - -static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); - gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); -} - -static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev) -{ } +static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = { + .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO, + .ini_gpio = -1, + .mo_gpio = -1, + .lr_gpio = -1, + .ud_gpio = -1, +}; static struct omap_dss_device sdp3430_lcd_device = { .name = "lcd", .driver_name = "sharp_ls_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 16, - .platform_enable = sdp3430_panel_enable_lcd, - .platform_disable = sdp3430_panel_disable_lcd, + .data = &sdp3430_lcd_data, }; static struct tfp410_platform_data dvi_panel = { @@ -175,8 +160,6 @@ static struct omap_dss_device sdp3430_tv_device = { .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = sdp3430_panel_enable_tv, - .platform_disable = sdp3430_panel_disable_tv, }; diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 35f3ad0cb7c..00d72902ef4 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -291,6 +291,10 @@ static struct platform_device sdp4430_leds_pwm = { }, }; +/* Dummy regulator for pwm-backlight driver */ +static struct regulator_consumer_supply backlight_supply = + REGULATOR_SUPPLY("enable", "pwm-backlight"); + static struct platform_pwm_backlight_data sdp4430_backlight_data = { .max_brightness = 127, .dft_brightness = 127, @@ -718,6 +722,8 @@ static void __init omap_4430sdp_init(void) omap4_i2c_init(); omap_sfh7741prox_init(); + regulator_register_always_on(0, "backlight-enable", + &backlight_supply, 1, 0); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 191f9762ba6..d63f14b534b 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -35,8 +35,7 @@ #include "common.h" #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "am35xx-emac.h" #include "mux.h" @@ -121,63 +120,14 @@ static int __init am3517_evm_i2c_init(void) return 0; } -static int lcd_enabled; -static int dvi_enabled; - -#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ - defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) -static struct gpio am3517_evm_dss_gpios[] __initdata = { - /* GPIO 182 = LCD Backlight Power */ - { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" }, - /* GPIO 181 = LCD Panel PWM */ - { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, - /* GPIO 176 = LCD Panel Power enable pin */ - { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" }, -}; - -static void __init am3517_evm_display_init(void) -{ - int r; - - omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP); - omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN); - - r = gpio_request_array(am3517_evm_dss_gpios, - ARRAY_SIZE(am3517_evm_dss_gpios)); - if (r) { - printk(KERN_ERR "failed to get DSS panel control GPIOs\n"); - return; - } - - printk(KERN_INFO "Display initialized successfully\n"); -} -#else -static void __init am3517_evm_display_init(void) {} -#endif - -static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - gpio_set_value(LCD_PANEL_PWR, 1); - lcd_enabled = 1; - - return 0; -} - -static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_set_value(LCD_PANEL_PWR, 0); - lcd_enabled = 0; -} - static struct panel_generic_dpi_data lcd_panel = { .name = "sharp_lq", - .platform_enable = am3517_evm_panel_enable_lcd, - .platform_disable = am3517_evm_panel_disable_lcd, + .num_gpios = 3, + .gpios = { + LCD_PANEL_PWR, + LCD_PANEL_BKLIGHT_PWR, + LCD_PANEL_PWM, + }, }; static struct omap_dss_device am3517_evm_lcd_device = { @@ -188,22 +138,11 @@ static struct omap_dss_device am3517_evm_lcd_device = { .phy.dpi.data_lines = 16, }; -static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct omap_dss_device am3517_evm_tv_device = { .type = OMAP_DISPLAY_TYPE_VENC, .name = "tv", .driver_name = "venc", .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = am3517_evm_panel_enable_tv, - .platform_disable = am3517_evm_panel_disable_tv, }; static struct tfp410_platform_data dvi_panel = { @@ -366,8 +305,6 @@ static void __init am3517_evm_init(void) usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); - /* DSS */ - am3517_evm_display_init(); /* RTC - S35390A */ am3517_evm_rtc_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 7fda3f5f8a7..ee6218c7480 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -41,8 +41,7 @@ #include <linux/platform_data/mtd-nand-omap2.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include "common.h" @@ -191,45 +190,12 @@ static inline void cm_t35_init_nand(void) {} #define CM_T35_LCD_BL_GPIO 58 #define CM_T35_DVI_EN_GPIO 54 -static int lcd_enabled; -static int dvi_enabled; - -static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - - gpio_set_value(CM_T35_LCD_EN_GPIO, 1); - gpio_set_value(CM_T35_LCD_BL_GPIO, 1); - - lcd_enabled = 1; - - return 0; -} - -static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - lcd_enabled = 0; - - gpio_set_value(CM_T35_LCD_BL_GPIO, 0); - gpio_set_value(CM_T35_LCD_EN_GPIO, 0); -} - -static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct panel_generic_dpi_data lcd_panel = { .name = "toppoly_tdo35s", - .platform_enable = cm_t35_panel_enable_lcd, - .platform_disable = cm_t35_panel_disable_lcd, + .num_gpios = 1, + .gpios = { + CM_T35_LCD_BL_GPIO, + }, }; static struct omap_dss_device cm_t35_lcd_device = { @@ -258,8 +224,6 @@ static struct omap_dss_device cm_t35_tv_device = { .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = cm_t35_panel_enable_tv, - .platform_disable = cm_t35_panel_disable_tv, }; static struct omap_dss_device *cm_t35_dss_devices[] = { @@ -293,11 +257,6 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { }, }; -static struct gpio cm_t35_dss_gpios[] __initdata = { - { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, - { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, -}; - static void __init cm_t35_init_display(void) { int err; @@ -305,23 +264,21 @@ static void __init cm_t35_init_display(void) spi_register_board_info(cm_t35_lcd_spi_board_info, ARRAY_SIZE(cm_t35_lcd_spi_board_info)); - err = gpio_request_array(cm_t35_dss_gpios, - ARRAY_SIZE(cm_t35_dss_gpios)); + + err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, + "lcd bl enable"); if (err) { - pr_err("CM-T35: failed to request DSS control GPIOs\n"); + pr_err("CM-T35: failed to request LCD EN GPIO\n"); return; } - gpio_export(CM_T35_LCD_EN_GPIO, 0); - gpio_export(CM_T35_LCD_BL_GPIO, 0); - msleep(50); gpio_set_value(CM_T35_LCD_EN_GPIO, 1); err = omap_display_init(&cm_t35_dss_data); if (err) { pr_err("CM-T35: failed to register DSS device\n"); - gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios)); + gpio_free(CM_T35_LCD_EN_GPIO); } } diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 42fbf1ef12a..57642054417 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -43,8 +43,7 @@ #include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/input/matrix_keypad.h> @@ -104,19 +103,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 1); - return 0; -} - -static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(dssdev->reset_gpio)) - gpio_set_value_cansleep(dssdev->reset_gpio, 0); -} - static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -128,8 +114,7 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = { static struct panel_generic_dpi_data lcd_panel = { .name = "innolux_at070tn83", - .platform_enable = devkit8000_panel_enable_lcd, - .platform_disable = devkit8000_panel_disable_lcd, + /* gpios filled in code */ }; static struct omap_dss_device devkit8000_lcd_device = { @@ -211,8 +196,6 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int ret; - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap_hsmmc_late_init(mmc); @@ -221,13 +204,8 @@ static int devkit8000_twl_gpio_setup(struct device *dev, gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; - ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, - GPIOF_OUT_INIT_LOW, "LCD_PWREN"); - if (ret < 0) { - devkit8000_lcd_device.reset_gpio = -EINVAL; - printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); - } + lcd_panel.num_gpios = 1; + lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0; /* gpio + 7 is "DVI_PD" (out, active low) */ dvi_panel.power_down_gpio = gpio + 7; diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 5b4ec51c385..69c0acf5aa6 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -34,7 +34,7 @@ #include <asm/mach/map.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-data.h> #include "common.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 95ccec0eeab..b54562d1235 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -31,7 +31,7 @@ #include <asm/mach/arch.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/mtd-onenand-omap2.h> #include "common.h" diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index b12fe966a7b..d0d17bc58d9 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -41,7 +41,7 @@ #include "gpmc-smsc911x.h" #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-data.h> #include "board-flash.h" #include "mux.h" @@ -181,34 +181,13 @@ static inline void __init ldp_init_smsc911x(void) /* LCD */ -static int ldp_backlight_gpio; -static int ldp_lcd_enable_gpio; - #define LCD_PANEL_RESET_GPIO 55 #define LCD_PANEL_QVGA_GPIO 56 -static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(ldp_lcd_enable_gpio)) - gpio_direction_output(ldp_lcd_enable_gpio, 1); - if (gpio_is_valid(ldp_backlight_gpio)) - gpio_direction_output(ldp_backlight_gpio, 1); - - return 0; -} - -static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - if (gpio_is_valid(ldp_lcd_enable_gpio)) - gpio_direction_output(ldp_lcd_enable_gpio, 0); - if (gpio_is_valid(ldp_backlight_gpio)) - gpio_direction_output(ldp_backlight_gpio, 0); -} - static struct panel_generic_dpi_data ldp_panel_data = { .name = "nec_nl2432dr22-11b", - .platform_enable = ldp_panel_enable_lcd, - .platform_disable = ldp_panel_disable_lcd, + .num_gpios = 4, + /* gpios filled in code */ }; static struct omap_dss_device ldp_lcd_device = { @@ -231,41 +210,19 @@ static struct omap_dss_board_info ldp_dss_data = { static void __init ldp_display_init(void) { - int r; - - static struct gpio gpios[] __initdata = { - {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"}, - {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"}, - }; - - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - return; - } + ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO; + ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO; omap_display_init(&ldp_dss_data); } static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; - - struct gpio gpios[] = { - {gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"}, - {gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"}, - }; - - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - ldp_backlight_gpio = -EINVAL; - ldp_lcd_enable_gpio = -EINVAL; - return r; - } - - ldp_backlight_gpio = gpio + 15; - ldp_lcd_enable_gpio = gpio + 7; + ldp_panel_data.gpios[0] = gpio + 7; + ldp_panel_data.gpio_invert[0] = true; + + ldp_panel_data.gpios[1] = gpio + 15; + ldp_panel_data.gpio_invert[1] = true; return 0; } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6955a428f53..6de78605c0a 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -44,7 +44,7 @@ #include <asm/mach/flash.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 2de92facc8a..f76d0de7b40 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -51,7 +51,7 @@ #include "common.h" #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "soc.h" #include "mux.h" @@ -155,61 +155,43 @@ static inline void __init omap3evm_init_smsc911x(void) { return; } #define OMAP3EVM_LCD_PANEL_LR 2 #define OMAP3EVM_LCD_PANEL_UD 3 #define OMAP3EVM_LCD_PANEL_INI 152 -#define OMAP3EVM_LCD_PANEL_ENVDD 153 #define OMAP3EVM_LCD_PANEL_QVGA 154 #define OMAP3EVM_LCD_PANEL_RESB 155 + +#define OMAP3EVM_LCD_PANEL_ENVDD 153 #define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210 + +/* + * OMAP3EVM DVI control signals + */ #define OMAP3EVM_DVI_PANEL_EN_GPIO 199 -static struct gpio omap3_evm_dss_gpios[] __initdata = { - { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" }, - { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" }, - { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" }, - { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" }, - { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" }, - { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" }, +static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = { + .resb_gpio = OMAP3EVM_LCD_PANEL_RESB, + .ini_gpio = OMAP3EVM_LCD_PANEL_INI, + .mo_gpio = OMAP3EVM_LCD_PANEL_QVGA, + .lr_gpio = OMAP3EVM_LCD_PANEL_LR, + .ud_gpio = OMAP3EVM_LCD_PANEL_UD, }; -static int lcd_enabled; -static int dvi_enabled; - static void __init omap3_evm_display_init(void) { int r; - r = gpio_request_array(omap3_evm_dss_gpios, - ARRAY_SIZE(omap3_evm_dss_gpios)); + r = gpio_request_one(OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, + "lcd_panel_envdd"); if (r) - printk(KERN_ERR "failed to get lcd_panel_* gpios\n"); -} + pr_err("failed to get lcd_panel_envdd GPIO\n"); -static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0); + r = gpio_request_one(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, + GPIOF_OUT_INIT_LOW, "lcd_panel_bklight"); + if (r) + pr_err("failed to get lcd_panel_bklight GPIO\n"); if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); else gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); - - lcd_enabled = 1; - return 0; -} - -static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1); - - if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) - gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1); - else - gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0); - - lcd_enabled = 0; } static struct omap_dss_device omap3_evm_lcd_device = { @@ -217,26 +199,14 @@ static struct omap_dss_device omap3_evm_lcd_device = { .driver_name = "sharp_ls_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 18, - .platform_enable = omap3_evm_enable_lcd, - .platform_disable = omap3_evm_disable_lcd, + .data = &omap3_evm_lcd_data, }; -static int omap3_evm_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void omap3_evm_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct omap_dss_device omap3_evm_tv_device = { .name = "tv", .driver_name = "venc", .type = OMAP_DISPLAY_TYPE_VENC, .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .platform_enable = omap3_evm_enable_tv, - .platform_disable = omap3_evm_disable_tv, }; static struct tfp410_platform_data dvi_panel = { diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1004d2aaa68..28133d5b4fe 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -44,6 +44,7 @@ #include "common.h" #include <video/omapdss.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/mtd-nand-omap2.h> #include "mux.h" @@ -230,12 +231,16 @@ static struct twl4030_keypad_data pandora_kp_data = { .rep = 1, }; +static struct panel_tpo_td043_data lcd_data = { + .nreset_gpio = 157, +}; + static struct omap_dss_device pandora_lcd_device = { .name = "lcd", .driver_name = "tpo_td043mtea1_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, - .reset_gpio = 157, + .data = &lcd_data, }; static struct omap_dss_device pandora_tv_device = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index bf095648989..d37e6b187ae 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -44,8 +44,7 @@ #include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -95,15 +94,6 @@ static void __init omap3_stalker_display_init(void) return; } -static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev) -{ -} - static struct omap_dss_device omap3_stalker_tv_device = { .name = "tv", .driver_name = "venc", @@ -113,8 +103,6 @@ static struct omap_dss_device omap3_stalker_tv_device = { #elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) .u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE, #endif - .platform_enable = omap3_stalker_enable_tv, - .platform_disable = omap3_stalker_disable_tv, }; static struct tfp410_platform_data dvi_panel = { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index ab79a4422bc..4ca6b680aa7 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -47,8 +47,7 @@ #include <asm/mach/map.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> -#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-data.h> #include "common.h" #include "mux.h" @@ -146,28 +145,9 @@ static inline void __init overo_init_smsc911x(void) { return; } #endif /* DSS */ -static int lcd_enabled; -static int dvi_enabled; - #define OVERO_GPIO_LCD_EN 144 #define OVERO_GPIO_LCD_BL 145 -static struct gpio overo_dss_gpios[] __initdata = { - { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" }, - { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" }, -}; - -static void __init overo_display_init(void) -{ - if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) { - printk(KERN_ERR "could not obtain DSS control GPIOs\n"); - return; - } - - gpio_export(OVERO_GPIO_LCD_EN, 0); - gpio_export(OVERO_GPIO_LCD_BL, 0); -} - static struct tfp410_platform_data dvi_panel = { .i2c_bus_num = 3, .power_down_gpio = -1, @@ -188,30 +168,13 @@ static struct omap_dss_device overo_tv_device = { .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, }; -static int overo_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - if (dvi_enabled) { - printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); - return -EINVAL; - } - - gpio_set_value(OVERO_GPIO_LCD_EN, 1); - gpio_set_value(OVERO_GPIO_LCD_BL, 1); - lcd_enabled = 1; - return 0; -} - -static void overo_panel_disable_lcd(struct omap_dss_device *dssdev) -{ - gpio_set_value(OVERO_GPIO_LCD_EN, 0); - gpio_set_value(OVERO_GPIO_LCD_BL, 0); - lcd_enabled = 0; -} - static struct panel_generic_dpi_data lcd43_panel = { .name = "samsung_lte430wq_f0c", - .platform_enable = overo_panel_enable_lcd, - .platform_disable = overo_panel_disable_lcd, + .num_gpios = 2, + .gpios = { + OVERO_GPIO_LCD_EN, + OVERO_GPIO_LCD_BL + }, }; static struct omap_dss_device overo_lcd43_device = { @@ -224,13 +187,20 @@ static struct omap_dss_device overo_lcd43_device = { #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) +static struct panel_generic_dpi_data lcd35_panel = { + .num_gpios = 2, + .gpios = { + OVERO_GPIO_LCD_EN, + OVERO_GPIO_LCD_BL + }, +}; + static struct omap_dss_device overo_lcd35_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "lcd35", .driver_name = "lgphilips_lb035q02_panel", .phy.dpi.data_lines = 24, - .platform_enable = overo_panel_enable_lcd, - .platform_disable = overo_panel_disable_lcd, + .data = &lcd35_panel, }; #endif @@ -509,7 +479,6 @@ static void __init overo_init(void) usbhs_init(&usbhs_bdata); overo_spi_init(); overo_init_smsc911x(); - overo_display_init(); overo_init_led(); overo_init_keys(); omap_twl4030_audio_init("overo", NULL); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 3a077df6b8d..1a884670a6c 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -547,12 +547,16 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { REGULATOR_SUPPLY("DVDD", "2-0019"), /* Si4713 IO supply */ REGULATOR_SUPPLY("vio", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd_IO", "3-001d"), }; static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), /* Si4713 supply */ REGULATOR_SUPPLY("vdd", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd", "3-001d"), }; static struct regulator_init_data rx51_vaux1 = { diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index eb667261df0..bd74f9f6063 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -16,6 +16,8 @@ #include <linux/mm.h> #include <asm/mach-types.h> #include <video/omapdss.h> +#include <video/omap-panel-data.h> + #include <linux/platform_data/spi-omap2-mcspi.h> #include "soc.h" @@ -27,25 +29,16 @@ #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) -static int rx51_lcd_enable(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 1); - return 0; -} - -static void rx51_lcd_disable(struct omap_dss_device *dssdev) -{ - gpio_set_value(dssdev->reset_gpio, 0); -} +static struct panel_acx565akm_data lcd_data = { + .reset_gpio = RX51_LCD_RESET_GPIO, +}; static struct omap_dss_device rx51_lcd_device = { .name = "lcd", .driver_name = "panel-acx565akm", .type = OMAP_DISPLAY_TYPE_SDI, .phy.sdi.datapairs = 2, - .reset_gpio = RX51_LCD_RESET_GPIO, - .platform_enable = rx51_lcd_enable, - .platform_disable = rx51_lcd_disable, + .data = &lcd_data, }; static struct omap_dss_device rx51_tv_device = { @@ -76,13 +69,8 @@ static int __init rx51_video_init(void) return 0; } - if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH, - "LCD ACX565AKM reset")) { - pr_err("%s failed to get LCD Reset GPIO\n", __func__); - return 0; - } - omap_display_init(&rx51_dss_board_info); + return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 8cef477d6b0..c2a079cb76f 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -12,12 +12,12 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/i2c/twl.h> #include <linux/spi/spi.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> -#include "board-zoom.h" +#include <video/omap-panel-data.h> +#include "board-zoom.h" #include "soc.h" #include "common.h" @@ -25,92 +25,17 @@ #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 -static struct gpio zoom_lcd_gpios[] __initdata = { - { -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" }, - { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" }, +static struct panel_nec_nl8048_data zoom_lcd_data = { + /* res_gpio filled in code */ + .qvga_gpio = LCD_PANEL_QVGA_GPIO, }; -static void __init zoom_lcd_panel_init(void) -{ - zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? - LCD_PANEL_RESET_GPIO_PROD : - LCD_PANEL_RESET_GPIO_PILOT; - - if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios))) - pr_err("%s: Failed to get LCD GPIOs.\n", __func__); -} - -static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) -{ - return 0; -} - -static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) -{ -} - -/* Register offsets in TWL4030_MODULE_INTBR */ -#define TWL_INTBR_PMBR1 0xD -#define TWL_INTBR_GPBR1 0xC - -/* Register offsets in TWL_MODULE_PWM */ -#define TWL_LED_PWMON 0x3 -#define TWL_LED_PWMOFF 0x4 - -static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) -{ -#ifdef CONFIG_TWL4030_CORE - unsigned char c; - u8 mux_pwm, enb_pwm; - - if (level > 100) - return -1; - - twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1); - twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1); - - if (level == 0) { - /* disable pwm1 output and clock */ - enb_pwm = enb_pwm & 0xF5; - /* change pwm1 pin to gpio pin */ - mux_pwm = mux_pwm & 0xCF; - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - enb_pwm, TWL_INTBR_GPBR1); - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - mux_pwm, TWL_INTBR_PMBR1); - return 0; - } - - if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) { - /* change gpio pin to pwm1 pin */ - mux_pwm = mux_pwm | 0x30; - /* enable pwm1 output and clock*/ - enb_pwm = enb_pwm | 0x0A; - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - mux_pwm, TWL_INTBR_PMBR1); - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - enb_pwm, TWL_INTBR_GPBR1); - } - - c = ((50 * (100 - level)) / 100) + 1; - twl_i2c_write_u8(TWL_MODULE_PWM, 0x7F, TWL_LED_PWMOFF); - twl_i2c_write_u8(TWL_MODULE_PWM, c, TWL_LED_PWMON); -#else - pr_warn("Backlight not enabled\n"); -#endif - - return 0; -} - static struct omap_dss_device zoom_lcd_device = { .name = "lcd", .driver_name = "NEC_8048_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, - .platform_enable = zoom_panel_enable_lcd, - .platform_disable = zoom_panel_disable_lcd, - .max_backlight_level = 100, - .set_backlight = zoom_set_bl_intensity, + .data = &zoom_lcd_data, }; static struct omap_dss_device *zoom_dss_devices[] = { @@ -123,6 +48,13 @@ static struct omap_dss_board_info zoom_dss_data = { .default_device = &zoom_lcd_device, }; +static void __init zoom_lcd_panel_init(void) +{ + zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + LCD_PANEL_RESET_GPIO_PROD : + LCD_PANEL_RESET_GPIO_PILOT; +} + static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { .turbo_mode = 1, }; diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index cdc0c102186..a90375d5b2b 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -22,6 +22,9 @@ #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/omap-twl4030.h> #include <linux/usb/phy.h> +#include <linux/pwm.h> +#include <linux/leds_pwm.h> +#include <linux/pwm_backlight.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -193,6 +196,53 @@ static struct platform_device omap_vwlan_device = { }, }; +static struct pwm_lookup zoom_pwm_lookup[] = { + PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "zoom::keypad"), + PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", "backlight"), +}; + +static struct led_pwm zoom_pwm_leds[] = { + { + .name = "zoom::keypad", + .max_brightness = 127, + .pwm_period_ns = 7812500, + }, +}; + +static struct led_pwm_platform_data zoom_pwm_data = { + .num_leds = ARRAY_SIZE(zoom_pwm_leds), + .leds = zoom_pwm_leds, +}; + +static struct platform_device zoom_leds_pwm = { + .name = "leds_pwm", + .id = -1, + .dev = { + .platform_data = &zoom_pwm_data, + }, +}; + +static struct platform_pwm_backlight_data zoom_backlight_data = { + .pwm_id = 1, + .max_brightness = 127, + .dft_brightness = 127, + .pwm_period_ns = 7812500, +}; + +static struct platform_device zoom_backlight_pwm = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .platform_data = &zoom_backlight_data, + }, +}; + +static struct platform_device *zoom_devices[] __initdata = { + &omap_vwlan_device, + &zoom_leds_pwm, + &zoom_backlight_pwm, +}; + static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */ }; @@ -301,7 +351,8 @@ void __init zoom_peripherals_init(void) omap_hsmmc_init(mmc); omap_i2c_init(); - platform_device_register(&omap_vwlan_device); + pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup)); + platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 3d58f335f17..0c6834ae1fc 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -52,6 +52,13 @@ */ #define OMAP4_DPLL_ABE_DEFFREQ 98304000 +/* + * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section + * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred + * locked frequency for the USB DPLL is 960MHz. + */ +#define OMAP4_DPLL_USB_DEFFREQ 960000000 + /* Root clocks */ DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0); @@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel, OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK, hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops); +DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0, + OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL); + DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0, OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL, OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); @@ -1538,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X), CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X), CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X), + CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X), CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X), CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X), CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X), @@ -1705,5 +1717,13 @@ int __init omap4xxx_clk_init(void) if (rc) pr_err("%s: failed to configure ABE DPLL!\n", __func__); + /* + * Lock USB DPLL on OMAP4 devices so that the L3INIT power + * domain can transition to retention state when not in use. + */ + rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ); + if (rc) + pr_err("%s: failed to configure USB DPLL!\n", __func__); + return 0; } diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index bf70e2b57ff..272490e72ee 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -292,5 +292,8 @@ extern void omap_reserve(void); struct omap_hwmod; extern int omap_dss_reset(struct omap_hwmod *); +/* SoC specific clock initializer */ +extern int (*omap_clk_init)(void); + #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 4be5cfc81ab..393aeefaebb 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -27,9 +27,7 @@ #include <linux/gpio.h> #include <video/omapdss.h> -#include <video/omap-panel-tfp410.h> -#include <video/omap-panel-nokia-dsi.h> -#include <video/omap-panel-picodlp.h> +#include <video/omap-panel-data.h> #include "soc.h" #include "dss-common.h" @@ -54,7 +52,6 @@ static struct omap_dss_device omap4_panda_dvi_device = { .driver_name = "tfp410", .data = &omap4_dvi_panel, .phy.dpi.data_lines = 24, - .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, .channel = OMAP_DSS_CHANNEL_LCD2, }; @@ -179,45 +176,12 @@ static struct picodlp_panel_data sdp4430_picodlp_pdata = { .pwrgood_gpio = 45, }; -static void sdp4430_picodlp_init(void) -{ - int r; - const struct gpio picodlp_gpios[] = { - {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"}, - {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, - "DLP EMU DONE"}, - {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, - "DLP PWRGOOD"}, - }; - - r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); - if (r) - pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); -} - -static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DISPLAY_SEL_GPIO, 0); - gpio_set_value(DLP_POWER_ON_GPIO, 1); - - return 0; -} - -static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DLP_POWER_ON_GPIO, 0); - gpio_set_value(DISPLAY_SEL_GPIO, 1); -} - static struct omap_dss_device sdp4430_picodlp_device = { .name = "picodlp", .driver_name = "picodlp_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, .channel = OMAP_DSS_CHANNEL_LCD2, - .platform_enable = sdp4430_panel_enable_picodlp, - .platform_disable = sdp4430_panel_disable_picodlp, .data = &sdp4430_picodlp_pdata, }; @@ -234,17 +198,26 @@ static struct omap_dss_board_info sdp4430_dss_data = { .default_device = &sdp4430_lcd_device, }; +/* + * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO. + * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails + * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is + * selected by default + */ void __init omap_4430sdp_display_init(void) { int r; - /* Enable LCD2 by default (instead of Pico DLP) */ r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, "display_sel"); if (r) pr_err("%s: Could not get display_sel GPIO\n", __func__); - sdp4430_picodlp_init(); + r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"); + if (r) + pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); + omap_display_init(&sdp4430_dss_data); /* * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and @@ -264,12 +237,15 @@ void __init omap_4430sdp_display_init_of(void) { int r; - /* Enable LCD2 by default (instead of Pico DLP) */ r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, "display_sel"); if (r) pr_err("%s: Could not get display_sel GPIO\n", __func__); - sdp4430_picodlp_init(); + r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"); + if (r) + pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); + omap_display_init(&sdp4430_dss_data); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2bef5a7e6af..e210fa830f8 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -55,6 +55,12 @@ #include "prm44xx.h" /* + * omap_clk_init: points to a function that does the SoC-specific + * clock initializations + */ +int (*omap_clk_init)(void); + +/* * The machine specific code may provide the extra mapping besides the * default mapping provided here. */ @@ -406,7 +412,7 @@ void __init omap2420_init_early(void) omap242x_clockdomains_init(); omap2420_hwmod_init(); omap_hwmod_init_postsetup(); - omap2420_clk_init(); + omap_clk_init = omap2420_clk_init; } void __init omap2420_init_late(void) @@ -436,7 +442,7 @@ void __init omap2430_init_early(void) omap243x_clockdomains_init(); omap2430_hwmod_init(); omap_hwmod_init_postsetup(); - omap2430_clk_init(); + omap_clk_init = omap2430_clk_init; } void __init omap2430_init_late(void) @@ -471,7 +477,7 @@ void __init omap3_init_early(void) omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - omap3xxx_clk_init(); + omap_clk_init = omap3xxx_clk_init; } void __init omap3430_init_early(void) @@ -509,7 +515,7 @@ void __init ti81xx_init_early(void) omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); omap_hwmod_init_postsetup(); - omap3xxx_clk_init(); + omap_clk_init = omap3xxx_clk_init; } void __init omap3_init_late(void) @@ -577,7 +583,7 @@ void __init am33xx_init_early(void) am33xx_clockdomains_init(); am33xx_hwmod_init(); omap_hwmod_init_postsetup(); - am33xx_clk_init(); + omap_clk_init = am33xx_clk_init; } #endif @@ -602,7 +608,7 @@ void __init omap4430_init_early(void) omap44xx_clockdomains_init(); omap44xx_hwmod_init(); omap_hwmod_init_postsetup(); - omap4xxx_clk_init(); + omap_clk_init = omap4xxx_clk_init; } void __init omap4430_init_late(void) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2520d46c850..3f50f680372 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1364,7 +1364,9 @@ static void _enable_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + if (oh->flags & HWMOD_FORCE_MSTANDBY) { + idlemode = HWMOD_IDLEMODE_FORCE; + } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) { idlemode = HWMOD_IDLEMODE_NO; } else { if (sf & SYSC_HAS_ENAWAKEUP) @@ -1436,7 +1438,8 @@ static void _idle_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + if ((oh->flags & HWMOD_SWSUP_MSTANDBY) || + (oh->flags & HWMOD_FORCE_MSTANDBY)) { idlemode = HWMOD_IDLEMODE_FORCE; } else { if (sf & SYSC_HAS_ENAWAKEUP) diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 28f4dea0512..fe5962921f0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm { * * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out * of idle, rather than relying on module smart-idle - * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out - * of standby, rather than relying on module smart-standby + * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and + * out of standby, rather than relying on module smart-standby * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for * SDRAM controller, etc. XXX probably belongs outside the main hwmod file * XXX Should be HWMOD_SETUP_NO_RESET @@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm { * correctly, or this is being abused to deal with some PM latency * issues -- but we're currently suffering from a shortage of * folks who are able to track these issues down properly. + * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device + * is kept in force-standby mode. Failing to do so causes PM problems + * with musb on OMAP3630 at least. Note that musb has a dedicated register + * to control MSTANDBY signal when MIDLEMODE is set to force-standby. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_16BIT_REG (1 << 8) #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) +#define HWMOD_FORCE_MSTANDBY (1 << 11) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ac7e03ec952..5112d04e7b7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { * Erratum ID: i479 idle_req / idle_ack mechanism potentially * broken when autoidle is enabled * workaround is to disable the autoidle bit at module level. + * + * Enabling the device in any other MIDLEMODE setting but force-idle + * causes core_pwrdm not enter idle states at least on OMAP3630. + * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY + * signal when MIDLEMODE is set to force-idle. */ .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE - | HWMOD_SWSUP_MSTANDBY, + | HWMOD_FORCE_MSTANDBY, }; /* usb_otg_hs */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 0e47d2e1687..9e0576569e0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = { { } }; +static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = { + { .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" }, +}; + /* ocp2scp_usb_phy */ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", @@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { }, }, .dev_attr = ocp2scp_dev_attr, + .opt_clks = ocp2scp_usb_phy_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks), }; /* diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 31109cb3f46..fdf1c039062 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -548,6 +548,8 @@ static inline void __init realtime_counter_init(void) clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_gptimer_timer_init(void) \ { \ + if (omap_clk_init) \ + omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ @@ -558,6 +560,8 @@ void __init omap##name##_gptimer_timer_init(void) \ clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_sync32k_timer_init(void) \ { \ + if (omap_clk_init) \ + omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ /* Enable the use of clocksource="gp_timer" kernel parameter */ \ |