aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/Kconfig')
-rw-r--r--arch/arm/mach-pxa/Kconfig120
1 files changed, 60 insertions, 60 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8e6288de69b..11aa7399dc0 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -27,10 +27,10 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config MACH_PXA3XX_DT
bool "Support PXA3xx platforms from device tree"
- select PXA3xx
select CPU_PXA300
- select POWER_SUPPLY
select HAVE_PWM
+ select POWER_SUPPLY
+ select PXA3xx
select USE_OF
help
Include support for Marvell PXA3xx based platforms using
@@ -44,13 +44,13 @@ config ARCH_LUBBOCK
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
- select PXA27x
select HAVE_PWM
+ select PXA27x
config MACH_ZYLONITE
bool
- select PXA3xx
select HAVE_PWM
+ select PXA3xx
config MACH_ZYLONITE300
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
@@ -65,19 +65,19 @@ config MACH_ZYLONITE320
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
- select PXA3xx
select CPU_PXA300
select CPU_PXA310
+ select PXA3xx
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
- select PXA3xx
select CPU_PXA930
+ select PXA3xx
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
- select PXA3xx
select CPU_PXA930
+ select PXA3xx
comment "Third Party Dev Platforms (sorted by vendor name)"
@@ -87,29 +87,29 @@ config ARCH_PXA_IDP
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
- select PXA25x
- select ISA
- select I2C_GPIO
+ select ARCOM_PCMCIA
select HAVE_PWM
+ select I2C_GPIO
+ select ISA
+ select PXA25x
select PXA_HAVE_ISA_IRQS
- select ARCOM_PCMCIA
config MACH_ARCOM_ZEUS
bool "Arcom/Eurotech ZEUS SBC"
- select PXA27x
+ select ARCOM_PCMCIA
select ISA
+ select PXA27x
select PXA_HAVE_ISA_IRQS
- select ARCOM_PCMCIA
config MACH_BALLOON3
bool "Balloon 3 board"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
- select PXA27x
select IWMMXT
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
@@ -121,11 +121,11 @@ config CSB726_CSB701
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
- select PXA27x
select IWMMXT
- select PXA25x
select MIGHT_HAVE_PCI
select NEED_MACH_IO_H if PCI
+ select PXA25x
+ select PXA27x
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
@@ -137,10 +137,10 @@ config MACH_EXEDA
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
- select PXA3xx
select CPU_PXA300
select CPU_PXA310
select HAVE_PWM
+ select PXA3xx
config MACH_CAPC7117
bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
@@ -168,22 +168,22 @@ endchoice
config MACH_INTELMOTE2
bool "Intel Mote 2 Platform"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_STARGATE2
bool "Intel Stargate 2 Platform"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_XCEP
bool "Iskratel Electronics XCEP"
- select PXA25x
select MTD
- select MTD_PHYSMAP
- select MTD_CFI_INTELEXT
select MTD_CFI
+ select MTD_CFI_INTELEXT
select MTD_CHAR
+ select MTD_PHYSMAP
+ select PXA25x
select SMC91X
help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
@@ -195,14 +195,14 @@ config TRIZEPS_PXA
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
- select TRIZEPS_PCMCIA
select PXA27x
+ select TRIZEPS_PCMCIA
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
- select TRIZEPS_PCMCIA
select PXA27x
+ select TRIZEPS_PCMCIA
choice
prompt "Select base board for Trizeps module"
@@ -231,18 +231,18 @@ config TRIZEPS_PCMCIA
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
- select PXA27x
select HAVE_PWM
+ select PXA27x
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
- select PXA27x
select IWMMXT
+ select PXA27x
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
- select HAVE_PWM
depends on MACH_PCM027
+ select HAVE_PWM
choice
prompt "display on pcm990"
@@ -266,19 +266,19 @@ config MACH_COLIBRI
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
- select PXA27x
select HAVE_PWM
+ select PXA27x
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
- select PXA3xx
select CPU_PXA300
select CPU_PXA310
+ select PXA3xx
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
- select PXA3xx
select CPU_PXA320
+ select PXA3xx
config MACH_COLIBRI_EVALBOARD
bool "Toradex Colibri Evaluation Carrier Board support"
@@ -286,8 +286,8 @@ config MACH_COLIBRI_EVALBOARD
config MACH_VPAC270
bool "Voipac PXA270"
- select PXA27x
select HAVE_PATA_PLATFORM
+ select PXA27x
help
PXA270 based Single Board Computer.
@@ -295,9 +295,9 @@ comment "End-user Products (sorted by vendor name)"
config MACH_H4700
bool "HP iPAQ hx4700"
- select PXA27x
- select IWMMXT
select HAVE_PWM
+ select IWMMXT
+ select PXA27x
config MACH_H5000
bool "HP iPAQ h5000"
@@ -309,16 +309,16 @@ config MACH_HIMALAYA
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
- select PXA27x
- select IWMMXT
select HAVE_PWM
+ select IWMMXT
+ select PXA27x
config MACH_MIOA701
bool "Mitac Mio A701 Support"
- select PXA27x
- select IWMMXT
- select HAVE_PWM
select GPIO_SYSFS
+ select HAVE_PWM
+ select IWMMXT
+ select PXA27x
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
@@ -326,9 +326,9 @@ config MACH_MIOA701
config PXA_EZX
bool "Motorola EZX Platform"
- select PXA27x
- select IWMMXT
select HAVE_PWM
+ select IWMMXT
+ select PXA27x
config MACH_EZX_A780
bool "Motorola EZX A780"
@@ -393,9 +393,9 @@ config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
@@ -404,9 +404,9 @@ config MACH_PALMTX
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
@@ -415,9 +415,9 @@ config MACH_PALMZ72
bool "Palm Zire 72"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
@@ -426,9 +426,9 @@ config MACH_PALMLD
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
- select PXA27x
select IWMMXT
select MACH_PALM27X
+ select PXA27x
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
@@ -441,10 +441,10 @@ config MACH_CENTRO
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
- select MACH_PALM27X
- select PXA27x
select IWMMXT
+ select MACH_PALM27X
select PALM_TREO
+ select PXA27x
help
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
smartphone.
@@ -453,37 +453,37 @@ config MACH_TREO680
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
- select MACH_PALM27X
- select PXA27x
select IWMMXT
+ select MACH_PALM27X
select PALM_TREO
+ select PXA27x
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
config MACH_RAUMFELD_RC
bool "Raumfeld Controller"
- select PXA3xx
select CPU_PXA300
- select POWER_SUPPLY
select HAVE_PWM
+ select POWER_SUPPLY
+ select PXA3xx
config MACH_RAUMFELD_CONNECTOR
bool "Raumfeld Connector"
+ select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
- select CPU_PXA300
config MACH_RAUMFELD_SPEAKER
bool "Raumfeld Speaker"
+ select CPU_PXA300
select POWER_SUPPLY
select PXA3xx
- select CPU_PXA300
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
- select SHARP_SCOOP
select SHARP_PARAM
+ select SHARP_SCOOP
help
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
@@ -526,11 +526,11 @@ config MACH_HUSKY
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
- select PXA27x
- select PXA_SHARP_Cxx00
- select MACH_SPITZ
select I2C
select I2C_PXA
+ select MACH_SPITZ
+ select PXA27x
+ select PXA_SHARP_Cxx00
config MACH_SPITZ
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
@@ -575,8 +575,8 @@ config MACH_ICONTROL
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
- select PXA25x
select FB_W100
+ select PXA25x
config MACH_E330
bool "Toshiba e330"
@@ -628,8 +628,8 @@ config MACH_E800
config MACH_ZIPIT2
bool "Zipit Z2 Handheld"
- select PXA27x
select HAVE_PWM
+ select PXA27x
endif
endmenu
@@ -720,9 +720,9 @@ config SHARPSL_PM
config SHARPSL_PM_MAX1111
bool
select HWMON
+ select SENSORS_MAX1111
select SPI
select SPI_MASTER
- select SENSORS_MAX1111
config PXA_HAVE_ISA_IRQS
bool