diff options
Diffstat (limited to 'arch/arm')
104 files changed, 650 insertions, 401 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d423d58f938..2651b1da1c5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -38,6 +38,7 @@ config ARM select HAVE_GENERIC_HARDIRQS select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_IDE if PCI || ISA || PCMCIA + select HAVE_IRQ_TIME_ACCOUNTING select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO @@ -488,7 +489,7 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select ARCH_REQUIRE_GPIOLIB - select CPU_V7 + select CPU_PJ4 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select PINCTRL @@ -1188,6 +1189,16 @@ config PL310_ERRATA_588369 is not correctly implemented in PL310 as clean lines are not invalidated as a result of these operations. +config ARM_ERRATA_643719 + bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 643719 Cortex-A9 (prior to + r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR + register returns zero when it should return one. The workaround + corrects this value, ensuring cache maintenance operations which use + it behave as intended and avoiding data corruption. + config ARM_ERRATA_720789 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" depends on CPU_V7 @@ -2005,7 +2016,7 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" - depends on (!SMP || HOTPLUG_CPU) + depends on (!SMP || PM_SLEEP_SMP) help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 47374085bef..1ba358ba16b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -309,7 +309,7 @@ define archhelp echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)' echo ' uImage - U-Boot wrapped zImage' - echo ' bootpImage - Combined zImage and initial RAM disk' + echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=<path>)' echo '* dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 3580d57ea21..120b83bfde2 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -116,7 +116,8 @@ targets := vmlinux vmlinux.lds \ # Make sure files are removed during clean extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern \ - lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) + lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) \ + hyp-stub.S ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) @@ -124,7 +125,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) -asflags-y := -Wa,-march=all -DZIMAGE +asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \ diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S index 6e8382d5b7a..5392ee63338 100644 --- a/arch/arm/boot/compressed/debug.S +++ b/arch/arm/boot/compressed/debug.S @@ -1,6 +1,8 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#ifndef CONFIG_DEBUG_SEMIHOSTING + #include CONFIG_DEBUG_LL_INCLUDE ENTRY(putc) @@ -10,3 +12,29 @@ ENTRY(putc) busyuart r3, r1 mov pc, lr ENDPROC(putc) + +#else + +ENTRY(putc) + adr r1, 1f + ldmia r1, {r2, r3} + add r2, r2, r1 + ldr r1, [r2, r3] + strb r0, [r1] + mov r0, #0x03 @ SYS_WRITEC + ARM( svc #0x123456 ) + THUMB( svc #0xab ) + mov pc, lr + .align 2 +1: .word _GLOBAL_OFFSET_TABLE_ - . + .word semi_writec_buf(GOT) +ENDPROC(putc) + + .bss + .global semi_writec_buf + .type semi_writec_buf, %object +semi_writec_buf: + .space 4 + .size semi_writec_buf, 4 + +#endif diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S index 6179d94dd5c..3115e313d9f 100644 --- a/arch/arm/boot/compressed/head-sa1100.S +++ b/arch/arm/boot/compressed/head-sa1100.S @@ -11,6 +11,7 @@ #include <asm/mach-types.h> .section ".start", "ax" + .arch armv4 __SA1100_start: diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S index 089c560e07f..92b56897ed6 100644 --- a/arch/arm/boot/compressed/head-shark.S +++ b/arch/arm/boot/compressed/head-shark.S @@ -18,6 +18,7 @@ .section ".start", "ax" + .arch armv4 b __beginning __ofw_data: .long 0 @ the number of memory blocks diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index fe4d9c3ad76..032a8d98714 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -11,6 +11,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> + .arch armv7-a /* * Debugging stuff * @@ -805,8 +806,8 @@ call_cache_fn: adr r12, proc_types .align 2 .type proc_types,#object proc_types: - .word 0x00000000 @ old ARM ID - .word 0x0000f000 + .word 0x41000000 @ old ARM ID + .word 0xff00f000 mov pc, lr THUMB( nop ) mov pc, lr diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9f7121e6ec..f0895c581a8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -177,7 +177,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ +dtb-$(CONFIG_ARCH_SUNXI) += \ + sun4i-a10-cubieboard.dtb \ + sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 1460d9b88ad..8e1248f01fa 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -409,8 +409,8 @@ ti,hwmods = "gpmc"; reg = <0x50000000 0x2000>; interrupts = <100>; - num-cs = <7>; - num-waitpins = <2>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 272bbc65fab..550eb772c30 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -33,7 +33,8 @@ #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&mpic>; - ranges = <0 0 0xd0000000 0x100000>; + ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; internal-regs { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index b2c1b5af974..aee2b1866ce 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -29,7 +29,8 @@ }; soc { - ranges = <0 0xd0000000 0x100000>; + ranges = <0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; internal-regs { system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; @@ -38,12 +39,12 @@ L2: l2-cache { compatible = "marvell,aurora-outer-cache"; - reg = <0xd0008000 0x1000>; + reg = <0x08000 0x1000>; cache-id-part = <0x100>; wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 26ad06fc147..76db557adbe 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -39,6 +39,10 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ + 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>; + internal-regs { serial@12000 { clock-frequency = <250000000>; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index f14d36c4615..fdea75c7341 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,6 +27,10 @@ }; soc { + ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ + 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>; + internal-regs { serial@12000 { clock-frequency = <250000000>; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index bacab11c10d..5b902f9a3af 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -31,7 +31,7 @@ wt-override; }; - mpic: interrupt-controller@20000 { + interrupt-controller@20000 { reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 70b5ccbac23..84c4bef2d72 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -264,7 +264,7 @@ atmel,pins = <0 10 0x2 0x0 /* PA10 periph B */ 0 11 0x2 0x0 /* PA11 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ + 0 22 0x2 0x0 /* PA22 periph B */ 0 25 0x2 0x0 /* PA25 periph B */ 0 26 0x2 0x0 /* PA26 periph B */ 0 27 0x2 0x0 /* PA27 periph B */ diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 3de8e6dfbcb..8d25f889928 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -57,6 +57,7 @@ compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 3b40d11d65e..315250b4995 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -11,7 +11,7 @@ /include/ "at91sam9x5ek.dtsi" / { - model = "Atmel AT91SAM9G25-EK"; + model = "Atmel AT91SAM9X25-EK"; compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; ahb { diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index f0052dccf9a..1e12aeff403 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -44,6 +44,7 @@ reg = <0x7e201000 0x1000>; interrupts = <2 25>; clock-frequency = <3000000>; + arm,primecell-periphid = <0x00241011>; }; gpio: gpio { diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index d1650fb34c0..ded558bb0f3 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -763,7 +763,7 @@ }; }; - pinctrl@03680000 { + pinctrl@03860000 { gpz: gpz { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 98dfc3ea5c0..fc9fb3d526e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -161,9 +161,9 @@ interrupts = <0 50 0>; }; - pinctrl_3: pinctrl@03680000 { + pinctrl_3: pinctrl@03860000 { compatible = "samsung,exynos5250-pinctrl"; - reg = <0x0368000 0x1000>; + reg = <0x03860000 0x1000>; interrupts = <0 47 0>; }; @@ -497,6 +497,21 @@ clock-names = "usbhost"; }; + usbphy@12130000 { + compatible = "samsung,exynos5250-usb2phy"; + reg = <0x12130000 0x100>; + clocks = <&clock 1>, <&clock 285>; + clock-names = "ext_xtal", "usbhost"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbphy-sys { + reg = <0x10040704 0x8>, + <0x10050230 0x4>; + }; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index d2550e0bca2..701153992c6 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -141,8 +141,8 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x43fa4000 0x4000>; - clocks = <&clks 62>; - clock-names = "ipg"; + clocks = <&clks 62>, <&clks 62>; + clock-names = "ipg", "per"; interrupts = <14>; status = "disabled"; }; @@ -182,8 +182,8 @@ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x50004000 0x4000>; interrupts = <0>; - clocks = <&clks 80>; - clock-names = "ipg"; + clocks = <&clks 80>, <&clks 80>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -210,8 +210,8 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x50010000 0x4000>; - clocks = <&clks 79>; - clock-names = "ipg"; + clocks = <&clks 79>, <&clks 79>; + clock-names = "ipg", "per"; interrupts = <13>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index ff4bd4873ed..75bd1138651 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -131,7 +131,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; - clocks = <&clks 53>, <&clks 0>; + clocks = <&clks 53>, <&clks 53>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -142,7 +142,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; - clocks = <&clks 52>, <&clks 0>; + clocks = <&clks 52>, <&clks 52>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -223,7 +223,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; - clocks = <&clks 51>, <&clks 0>; + clocks = <&clks 51>, <&clks 51>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 21bb786c5b3..53fdde69bbf 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -631,7 +631,7 @@ compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; reg = <0x83fc0000 0x4000>; interrupts = <38>; - clocks = <&clks 55>, <&clks 0>; + clocks = <&clks 55>, <&clks 55>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 845982eaac2..eb83aa039b8 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -714,7 +714,7 @@ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; reg = <0x63fc0000 0x4000>; interrupts = <38>; - clocks = <&clks 55>, <&clks 0>; + clocks = <&clks 55>, <&clks 55>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 82a404da1c0..99ba6e14ebf 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -516,7 +516,7 @@ usb_otg_hs: usb_otg_hs@480ab000 { compatible = "ti,omap3-musb"; reg = <0x480ab000 0x1000>; - interrupts = <0 92 0x4>, <0 93 0x4>; + interrupts = <92>, <93>; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; multipoint = <1>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 03bd60deb52..eeb734e2570 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -56,9 +56,23 @@ }; }; +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_wkup_pins + >; + + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + >; + }; +}; + &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < + &twl6030_pins &twl6040_pins &mcpdm_pins &mcbsp1_pins @@ -66,6 +80,12 @@ &tpd12s015_pins >; + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + >; + }; + twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index a35d9cd5806..98505a2ef16 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -142,9 +142,23 @@ }; }; +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_wkup_pins + >; + + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + >; + }; +}; + &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < + &twl6030_pins &twl6040_pins &mcpdm_pins &dmic_pins @@ -179,6 +193,12 @@ >; }; + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + >; + }; + twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 3dd7ff82582..635cae28301 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -538,6 +538,7 @@ interrupts = <0 41 0x4>; ti,hwmods = "timer5"; ti,timer-dsp; + ti,timer-pwm; }; timer6: timer@4013a000 { @@ -574,6 +575,7 @@ reg = <0x4803e000 0x80>; interrupts = <0 45 0x4>; ti,hwmods = "timer9"; + ti,timer-pwm; }; timer10: timer@48086000 { @@ -581,6 +583,7 @@ reg = <0x48086000 0x80>; interrupts = <0 46 0x4>; ti,hwmods = "timer10"; + ti,timer-pwm; }; timer11: timer@48088000 { diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 2e643ea51cc..5000e0d4284 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -75,11 +75,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf0004000 0x100>; interrupts = <24 4 3>; - cs-gpios = <&pioD 13 0 - &pioD 14 0 /* conflicts with SCK0 and CANRX0 */ - &pioD 15 0 /* conflicts with CTS0 and CANTX0 */ - &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -156,7 +151,7 @@ }; macb0: ethernet@f0028000 { - compatible = "cnds,pc302-gem", "cdns,gem"; + compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; interrupts = <34 4 3>; pinctrl-names = "default"; @@ -203,11 +198,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf8008000 0x100>; interrupts = <25 4 3>; - cs-gpios = <&pioC 25 0 - &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */ - &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */ - &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 1f8ed404626..b336e7787cb 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -32,6 +32,10 @@ ahb { apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + macb0: ethernet@f0028000 { phy-mode = "rgmii"; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index b28fbf3408e..6f82d936894 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -14,13 +14,19 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; + /* This is where the interrupt is routed on the S8815 board */ + external-bus@34000000 { + ethernet@300 { + interrupt-parent = <&gpio3>; + interrupts = <8 0x1>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ ethernet-gpio { - gpios = <&gpio3 19 0x1>; - interrupts = <19 0x1>; - interrupt-parent = <&gpio3>; + gpios = <&gpio3 8 0x1>; }; /* This will bias the MMC/SD card detect line */ mmcsd-gpio { diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 4a7c35d6726..078ed7f618d 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -22,8 +22,8 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { + soc@01c20000 { + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index 52b88d81b7b..3caed0db698 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -15,8 +15,6 @@ #include <linux/smp.h> #include <linux/spinlock.h> -#include <linux/irqchip/arm-gic.h> - #include <asm/mcpm.h> #include <asm/smp.h> #include <asm/smp_plat.h> @@ -49,7 +47,6 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i static void __cpuinit mcpm_secondary_init(unsigned int cpu) { mcpm_cpu_powered_up(); - gic_secondary_init(0); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index e40b435d204..227abf9cc60 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,4 +1,4 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y @@ -7,17 +7,18 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_ARCH_EXYNOS=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_LOWLEVEL_UART_PORT=3 CONFIG_S3C24XX_PWM=y CONFIG_ARCH_EXYNOS5=y CONFIG_MACH_EXYNOS4_DT=y -CONFIG_MACH_EXYNOS5_DT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" @@ -30,35 +31,58 @@ CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_RFKILL_REGULATOR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m CONFIG_NETDEVICES=y CONFIG_SMSC911X=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set +CONFIG_KEYBOARD_CROS_EC=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM=y +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_I2C_S3C2410=y +CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX8997=y +CONFIG_MFD_SEC_CORE=y CONFIG_MFD_TPS65090=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8997=y +CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y CONFIG_EXYNOS_DP=y @@ -67,6 +91,20 @@ CONFIG_FONTS=y CONFIG_FONT_7x14=y CONFIG_LOGO=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_S5P=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y +CONFIG_USB_PHY=y +CONFIG_SAMSUNG_USB2PHY=y +CONFIG_SAMSUNG_USB3PHY=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_COMMON_CLK_MAX77686=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y @@ -79,6 +117,7 @@ CONFIG_ROMFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y @@ -87,6 +126,5 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_SHA256=y CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 7e0ebb64a7f..9940f7b4e43 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -199,7 +199,6 @@ CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c1ef64bc5ab..abbe31937c6 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y @@ -204,7 +205,6 @@ CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a5f0485133c..f7ba316164d 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y +CONFIG_TEGRA_HOST1X=y CONFIG_DRM_TEGRA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y -CONFIG_SENSORS_AK8975=y +CONFIG_AK8975=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S index 92c6eed7aac..99207c45ec1 100644 --- a/arch/arm/crypto/sha1-armv4-large.S +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -195,6 +195,7 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) cmp r14,sp bne .L_00_15 @ [((11+4)*5+2)*3] + sub sp,sp,#25*4 #if __ARM_ARCH__<7 ldrb r10,[r1,#2] ldrb r9,[r1,#3] @@ -290,7 +291,6 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) ldr r8,.LK_20_39 @ [+15+16*4] - sub sp,sp,#25*4 cmn sp,#0 @ [+3], clear carry to denote 20_39 .L_20_39_or_60_79: ldr r9,[r14,#15*4] diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index bff71388e72..17d0ae8672f 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -320,9 +320,7 @@ static inline void flush_anon_page(struct vm_area_struct *vma, } #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE -static inline void flush_kernel_dcache_page(struct page *page) -{ -} +extern void flush_kernel_dcache_page(struct page *); #define flush_dcache_mmap_lock(mapping) \ spin_lock_irq(&(mapping)->tree_lock) diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h index 7eb18c1d8d6..4f009c10540 100644 --- a/arch/arm/include/asm/cmpxchg.h +++ b/arch/arm/include/asm/cmpxchg.h @@ -233,15 +233,15 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr, ((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr), \ atomic64_t, \ counter), \ - (unsigned long)(o), \ - (unsigned long)(n))) + (unsigned long long)(o), \ + (unsigned long long)(n))) #define cmpxchg64_local(ptr, o, n) \ ((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr), \ local64_t, \ a), \ - (unsigned long)(o), \ - (unsigned long)(n))) + (unsigned long long)(o), \ + (unsigned long long)(n))) #endif /* __LINUX_ARM_ARCH__ >= 6 */ diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h index 968c0a14e0a..209e6504922 100644 --- a/arch/arm/include/asm/percpu.h +++ b/arch/arm/include/asm/percpu.h @@ -30,8 +30,15 @@ static inline void set_my_cpu_offset(unsigned long off) static inline unsigned long __my_cpu_offset(void) { unsigned long off; - /* Read TPIDRPRW */ - asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory"); + register unsigned long *sp asm ("sp"); + + /* + * Read TPIDRPRW. + * We want to allow caching the value, so avoid using volatile and + * instead use a fake stack read to hazard against barrier(). + */ + asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : "Q" (*sp)); + return off; } #define __my_cpu_offset __my_cpu_offset() diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 99a19512ee2..bdf2b8458ec 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -33,18 +33,6 @@ #include <asm/pgalloc.h> #include <asm/tlbflush.h> -/* - * We need to delay page freeing for SMP as other CPUs can access pages - * which have been removed but not yet had their TLB entries invalidated. - * Also, as ARMv7 speculative prefetch can drag new entries into the TLB, - * we need to apply this same delaying tactic to ensure correct operation. - */ -#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) -#define tlb_fast_mode(tlb) 0 -#else -#define tlb_fast_mode(tlb) 1 -#endif - #define MMU_GATHER_BUNDLE 8 /* @@ -112,12 +100,10 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) static inline void tlb_flush_mmu(struct mmu_gather *tlb) { tlb_flush(tlb); - if (!tlb_fast_mode(tlb)) { - free_pages_and_swap_cache(tlb->pages, tlb->nr); - tlb->nr = 0; - if (tlb->pages == tlb->local) - __tlb_alloc_page(tlb); - } + free_pages_and_swap_cache(tlb->pages, tlb->nr); + tlb->nr = 0; + if (tlb->pages == tlb->local) + __tlb_alloc_page(tlb); } static inline void @@ -178,11 +164,6 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu */ - } - tlb->pages[tlb->nr++] = page; VM_BUG_ON(tlb->nr > tlb->max); return tlb->max - tlb->nr; diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S index 2848857f5b6..fbd24beeb1f 100644 --- a/arch/arm/include/debug/ux500.S +++ b/arch/arm/include/debug/ux500.S @@ -24,9 +24,9 @@ #define U8500_UART0_PHYS_BASE (0x80120000) #define U8500_UART1_PHYS_BASE (0x80121000) #define U8500_UART2_PHYS_BASE (0x80007000) -#define U8500_UART0_VIRT_BASE (0xa8120000) -#define U8500_UART1_VIRT_BASE (0xa8121000) -#define U8500_UART2_VIRT_BASE (0xa8007000) +#define U8500_UART0_VIRT_BASE (0xf8120000) +#define U8500_UART1_VIRT_BASE (0xf8121000) +#define U8500_UART2_VIRT_BASE (0xf8007000) #define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE #define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE #endif diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 8ef8c933780..4fb074c446b 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -134,6 +134,10 @@ void machine_kexec(struct kimage *image) unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; + if (num_online_cpus() > 1) { + pr_err("kexec: error: multiple CPUs still online\n"); + return; + } page_list = image->head & PAGE_MASK; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index f2197031683..6e8931ccf13 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -184,30 +184,61 @@ int __init reboot_setup(char *str) __setup("reboot=", reboot_setup); +/* + * Called by kexec, immediately prior to machine_kexec(). + * + * This must completely disable all secondary CPUs; simply causing those CPUs + * to execute e.g. a RAM-based pin loop is not sufficient. This allows the + * kexec'd kernel to use any and all RAM as it sees fit, without having to + * avoid any code or data used by any SW CPU pin loop. The CPU hotplug + * functionality embodied in disable_nonboot_cpus() to achieve this. + */ void machine_shutdown(void) { -#ifdef CONFIG_SMP - smp_send_stop(); -#endif + disable_nonboot_cpus(); } +/* + * Halting simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. + */ void machine_halt(void) { - machine_shutdown(); + smp_send_stop(); + local_irq_disable(); while (1); } +/* + * Power-off simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. When the system power is turned off, it will take all CPUs + * with it. + */ void machine_power_off(void) { - machine_shutdown(); + smp_send_stop(); + if (pm_power_off) pm_power_off(); } +/* + * Restart requires that the secondary CPUs stop performing any activity + * while the primary CPU resets the system. Systems with a single CPU can + * use soft_restart() as their machine descriptor's .restart hook, since that + * will cause the only available CPU to reset. Systems with multiple CPUs must + * provide a HW restart implementation, to ensure that all CPUs reset at once. + * This is required so that any code running after reset on the primary CPU + * doesn't have to co-ordinate with other CPUs to ensure they aren't still + * executing pre-reset code, and using RAM that the primary CPU's code wishes + * to use. Implementing such co-ordination would be essentially impossible. + */ void machine_restart(char *cmd) { - machine_shutdown(); + smp_send_stop(); arm_pm_restart(reboot_mode, cmd); @@ -411,7 +442,6 @@ static struct vm_area_struct gate_vma = { .vm_start = 0xffff0000, .vm_end = 0xffff0000 + PAGE_SIZE, .vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC, - .vm_mm = &init_mm, }; static int __init gate_vma_init(void) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 47ab90563bf..5919eb451bb 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -251,7 +251,7 @@ void __ref cpu_die(void) * this returns, power and/or clocks can be removed at any point * from this CPU and its cache by platform_cpu_kill(). */ - RCU_NONIDLE(complete(&cpu_died)); + complete(&cpu_died); /* * Ensure that the cache lines associated with that completion are @@ -651,17 +651,6 @@ void smp_send_reschedule(int cpu) smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE); } -#ifdef CONFIG_HOTPLUG_CPU -static void smp_kill_cpus(cpumask_t *mask) -{ - unsigned int cpu; - for_each_cpu(cpu, mask) - platform_cpu_kill(cpu); -} -#else -static void smp_kill_cpus(cpumask_t *mask) { } -#endif - void smp_send_stop(void) { unsigned long timeout; @@ -679,8 +668,6 @@ void smp_send_stop(void) if (num_online_cpus() > 1) pr_warning("SMP: failed to stop secondary CPUs\n"); - - smp_kill_cpus(&mask); } /* diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index f10316b4ecd..c5a59546a25 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -13,6 +13,7 @@ #include <linux/cpu.h> #include <linux/cpumask.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/percpu.h> #include <linux/node.h> @@ -200,6 +201,7 @@ static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {} * cpu topology table */ struct cputopo_arm cpu_topology[NR_CPUS]; +EXPORT_SYMBOL_GPL(cpu_topology); const struct cpumask *cpu_coregroup_mask(int cpu) { diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 37d216d814c..ef1703b9587 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -492,6 +492,11 @@ static void vcpu_pause(struct kvm_vcpu *vcpu) wait_event_interruptible(*wq, !vcpu->arch.pause); } +static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.target >= 0; +} + /** * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code * @vcpu: The VCPU pointer @@ -508,8 +513,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) int ret; sigset_t sigsaved; - /* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */ - if (unlikely(vcpu->arch.target < 0)) + if (unlikely(!kvm_vcpu_initialized(vcpu))) return -ENOEXEC; ret = kvm_vcpu_first_run_init(vcpu); @@ -710,6 +714,10 @@ long kvm_arch_vcpu_ioctl(struct file *filp, case KVM_SET_ONE_REG: case KVM_GET_ONE_REG: { struct kvm_one_reg reg; + + if (unlikely(!kvm_vcpu_initialized(vcpu))) + return -ENOEXEC; + if (copy_from_user(®, argp, sizeof(reg))) return -EFAULT; if (ioctl == KVM_SET_ONE_REG) @@ -722,6 +730,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp, struct kvm_reg_list reg_list; unsigned n; + if (unlikely(!kvm_vcpu_initialized(vcpu))) + return -ENOEXEC; + if (copy_from_user(®_list, user_list, sizeof(reg_list))) return -EFAULT; n = reg_list.n; diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 965706578f1..84ba67b982c 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -43,7 +43,14 @@ static phys_addr_t hyp_idmap_vector; static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { - kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); + /* + * This function also gets called when dealing with HYP page + * tables. As HYP doesn't have an associated struct kvm (and + * the HYP page tables are fairly static), we don't do + * anything there. + */ + if (kvm) + kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); } static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache, @@ -78,18 +85,20 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) return p; } -static void clear_pud_entry(pud_t *pud) +static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr) { pmd_t *pmd_table = pmd_offset(pud, 0); pud_clear(pud); + kvm_tlb_flush_vmid_ipa(kvm, addr); pmd_free(NULL, pmd_table); put_page(virt_to_page(pud)); } -static void clear_pmd_entry(pmd_t *pmd) +static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr) { pte_t *pte_table = pte_offset_kernel(pmd, 0); pmd_clear(pmd); + kvm_tlb_flush_vmid_ipa(kvm, addr); pte_free_kernel(NULL, pte_table); put_page(virt_to_page(pmd)); } @@ -100,11 +109,12 @@ static bool pmd_empty(pmd_t *pmd) return page_count(pmd_page) == 1; } -static void clear_pte_entry(pte_t *pte) +static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr) { if (pte_present(*pte)) { kvm_set_pte(pte, __pte(0)); put_page(virt_to_page(pte)); + kvm_tlb_flush_vmid_ipa(kvm, addr); } } @@ -114,7 +124,8 @@ static bool pte_empty(pte_t *pte) return page_count(pte_page) == 1; } -static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) +static void unmap_range(struct kvm *kvm, pgd_t *pgdp, + unsigned long long start, u64 size) { pgd_t *pgd; pud_t *pud; @@ -138,15 +149,15 @@ static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) } pte = pte_offset_kernel(pmd, addr); - clear_pte_entry(pte); + clear_pte_entry(kvm, pte, addr); range = PAGE_SIZE; /* If we emptied the pte, walk back up the ladder */ if (pte_empty(pte)) { - clear_pmd_entry(pmd); + clear_pmd_entry(kvm, pmd, addr); range = PMD_SIZE; if (pmd_empty(pmd)) { - clear_pud_entry(pud); + clear_pud_entry(kvm, pud, addr); range = PUD_SIZE; } } @@ -165,14 +176,14 @@ void free_boot_hyp_pgd(void) mutex_lock(&kvm_hyp_pgd_mutex); if (boot_hyp_pgd) { - unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); - unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); + unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); kfree(boot_hyp_pgd); boot_hyp_pgd = NULL; } if (hyp_pgd) - unmap_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); kfree(init_bounce_page); init_bounce_page = NULL; @@ -200,9 +211,10 @@ void free_hyp_pgds(void) if (hyp_pgd) { for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE) - unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) - unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + kfree(hyp_pgd); hyp_pgd = NULL; } @@ -393,7 +405,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm) */ static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size) { - unmap_range(kvm->arch.pgd, start, size); + unmap_range(kvm, kvm->arch.pgd, start, size); } /** @@ -675,7 +687,6 @@ static void handle_hva_to_gpa(struct kvm *kvm, static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) { unmap_stage2_range(kvm, gpa, PAGE_SIZE); - kvm_tlb_flush_vmid_ipa(kvm, gpa); } int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 2acdff4c1df..180b3024bec 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ + clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); + clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); + clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, - 2, AT91_ST_ALMV); + clockevents_register_device(&clkevt); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 13cdbcd48f5..c7d670d1180 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void) at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE); } -void __init at91sam9n12_initialize(void) -{ - at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); -} - AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, - .init = at91sam9n12_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 31df12029c4..2bd7f51b0b8 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ #define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ #define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ -#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */ -#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */ -#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */ +#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d19edff0ea6..ff18fc2ea46 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -250,6 +250,7 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select CPU_EXYNOS4210 select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -281,7 +282,6 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_TV select S5P_GPIO_INT select S5P_SETUP_MIPIPHY - select SAMSUNG_HRT help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT depends on ARCH_EXYNOS4 select ARM_AMBA select CLKSRC_OF + select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select PINCTRL diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 745e304ad0d..f7e504b7874 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -10,12 +10,14 @@ */ #include <linux/kernel.h> +#include <linux/bitops.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/io.h> #include <linux/device.h> #include <linux/gpio.h> +#include <clocksource/samsung_pwm.h> #include <linux/sched.h> #include <linux/serial_core.h> #include <linux/of.h> @@ -302,6 +304,13 @@ static struct map_desc exynos5440_iodesc0[] __initdata = { }, }; +static struct samsung_pwm_variant exynos4_pwm_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = 0, +}; + void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -317,9 +326,16 @@ void exynos5_restart(char mode, const char *cmd) val = 0x1; addr = EXYNOS_SWRESET; } else if (of_machine_is_compatible("samsung,exynos5440")) { + u32 status; np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); + + addr = of_iomap(np, 0) + 0xbc; + status = __raw_readl(addr); + addr = of_iomap(np, 0) + 0xcc; - val = (0xfff << 20) | (0x1 << 16); + val = __raw_readl(addr); + + val = (val & 0xffff0000) | (status & 0xffff); } else { pr_err("%s: cannot support non-DT\n", __func__); return; @@ -370,6 +386,8 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, void __init exynos_init_io(struct map_desc *mach_desc, int size) { + debug_ll_io_init(); + #ifdef CONFIG_OF if (initial_boot_params) of_scan_flat_dt(exynos_fdt_map_chipid, NULL); @@ -442,8 +460,20 @@ static void __init exynos5440_map_io(void) iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); } +void __init exynos_set_timer_source(u8 channels) +{ + exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; + exynos4_pwm_variant.output_mask &= ~channels; +} + void __init exynos_init_time(void) { + unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { + EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC, + EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC, + EXYNOS4_IRQ_TIMER4_VIC, + }; + if (of_have_populated_dt()) { #ifdef CONFIG_OF of_clk_init(NULL); @@ -455,7 +485,14 @@ void __init exynos_init_time(void) exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1); exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f); #endif - mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); +#ifdef CONFIG_CLKSRC_SAMSUNG_PWM + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + samsung_pwm_clocksource_init(S3C_VA_TIMER, + timer_irqs, &exynos4_pwm_variant); + else +#endif + mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, + EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); } } diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 60dd35cc01a..11fc1e29819 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -32,6 +32,8 @@ void exynos4_clk_register_fixed_ext(unsigned long, unsigned long); void exynos_firmware_init(void); +void exynos_set_timer_source(u8 channels); + #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h index 7dbbfec13ea..296090e7f42 100644 --- a/arch/arm/mach-exynos/include/mach/pm-core.h +++ b/arch/arm/mach-exynos/include/mach/pm-core.h @@ -18,8 +18,15 @@ #ifndef __ASM_ARCH_PM_CORE_H #define __ASM_ARCH_PM_CORE_H __FILE__ +#include <linux/of.h> #include <mach/regs-pmu.h> +#ifdef CONFIG_PINCTRL_EXYNOS +extern u32 exynos_get_eint_wake_mask(void); +#else +static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; } +#endif + static inline void s3c_pm_debug_init_uart(void) { /* nothing here yet */ @@ -27,7 +34,12 @@ static inline void s3c_pm_debug_init_uart(void) static inline void s3c_pm_arch_prepare_irqs(void) { - __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); + u32 eintmask = s3c_irqwake_eintmask; + + if (of_have_populated_dt()) + eintmask = exynos_get_eint_wake_mask(); + + __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK); __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); } diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 327d50d4681..74ddb2b5561 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -41,7 +41,6 @@ #include <plat/mfc.h> #include <plat/sdhci.h> #include <plat/fimc-core.h> -#include <plat/samsung-time.h> #include <plat/camport.h> #include <mach/map.h> @@ -1094,7 +1093,7 @@ static void __init universal_map_io(void) { exynos_init_io(NULL, 0); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); + exynos_set_timer_source(BIT(2) | BIT(4)); xxti_f = 0; xusbxti_f = 24000000; } @@ -1154,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .init_machine = universal_machine_init, .init_late = exynos_init_late, - .init_time = samsung_timer_init, + .init_time = exynos_init_time, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 15125900308..4e3148ce852 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -177,17 +177,18 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; -static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; -static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; +static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; -static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; +static const char *ldb_di_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; @@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void) clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); @@ -498,7 +499,7 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); + clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 67b9c48dcaf..627f16f0e9d 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -18,8 +18,20 @@ .section ".text.head", "ax" #ifdef CONFIG_SMP +diag_reg_offset: + .word g_diag_reg - . + + .macro set_diag_reg + adr r0, diag_reg_offset + ldr r1, [r0] + add r1, r1, r0 @ r1 = physical &g_diag_reg + ldr r0, [r1] + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + .endm + ENTRY(v7_secondary_startup) bl v7_invalidate_l1 + set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) #endif diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 4a69305db65..c6e1ab54488 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/smp.h> +#include <asm/cacheflush.h> #include <asm/page.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -21,6 +22,7 @@ #define SCU_STANDBY_ENABLE (1 << 5) +u32 g_diag_reg; static void __iomem *scu_base; static struct map_desc scu_io_desc __initdata = { @@ -80,6 +82,18 @@ void imx_smp_prepare(void) static void __init imx_smp_prepare_cpus(unsigned int max_cpus) { imx_smp_prepare(); + + /* + * The diagnostic register holds the errata bits. Mostly bootloader + * does not bring up secondary cores, so that when errata bits are set + * in bootloader, they are set only for boot cpu. But on a SMP + * configuration, it should be equally done on every single core. + * Read the register from boot cpu here, and will replicate it into + * secondary cores when booting them. + */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc"); + __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg)); + outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1)); } struct smp_operations imx_smp_ops __initdata = { diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index acb0187c7ee..4695d5f35fc 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -41,13 +41,3 @@ void __init qnap_dt_ts219_init(void) pm_power_off = qnap_tsx1x_power_off; } - -/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */ -static int __init ts219_pci_init(void) -{ - if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(ts219_pci_init); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c2cae69e6d2..f3892289756 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -528,12 +528,6 @@ void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Kirkwood devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); mvebu_mbus_init("marvell,kirkwood-mbus", BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 827cde42414..e96fd71abd7 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -22,9 +22,10 @@ static unsigned int __init kirkwood_variant(void) kirkwood_pcie_id(&dev, &rev); - if ((dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) || - (dev == MV88F6282_DEV_ID)) + if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) return MPP_F6281_MASK; + if (dev == MV88F6282_DEV_ID) + return MPP_F6282_MASK; if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0) return MPP_F6192_MASK; if (dev == MV88F6180_DEV_ID) diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 283abff9022..e1267d6b468 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -124,7 +124,7 @@ static void __init qnap_ts219_init(void) static int __init ts219_pci_init(void) { if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); + kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); return 0; } diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index e11acbb0a46..80a8bcacd9d 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -15,6 +15,7 @@ config ARCH_MVEBU select MVEBU_CLK_GATING select MVEBU_MBUS select ZONE_DMA if ARM_LPAE + select ARCH_REQUIRE_GPIOLIB if ARCH_MVEBU diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c index 42a4cb3087e..1c48890bb72 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.c +++ b/arch/arm/mach-mvebu/armada-370-xp.c @@ -54,13 +54,6 @@ void __init armada_370_xp_init_early(void) char *mbus_soc_name; /* - * Some Armada 370/XP devices allocate their coherent buffers - * from atomic context. Increase size of atomic coherent pool - * to make sure such the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - - /* * This initialization will be replaced by a DT-based * initialization once the mvebu-mbus driver gains DT support. */ diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index 53e8391192c..5476669ba90 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -32,15 +32,21 @@ ENTRY(ll_set_cpu_coherent) /* Add CPU to SMP group - Atomic */ add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET - ldr r2, [r3] +1: + ldrex r2, [r3] orr r2, r2, r1 - str r2, [r3] + strex r0, r2, [r3] + cmp r0, #0 + bne 1b /* Enable coherency on CPU - Atomic */ - add r3, r0, #ARMADA_XP_CFB_CFG_REG_OFFSET - ldr r2, [r3] + add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET +1: + ldrex r2, [r3] orr r2, r2, r1 - str r2, [r3] + strex r0, r2, [r3] + cmp r0, #0 + bne 1b dsb diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 68ab858e27b..a94b3a718d1 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -345,6 +345,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Memory allocation failed for d->chan!\n", __func__); + ret = -ENOMEM; goto exit_release_d; } diff --git a/arch/arm/mach-omap2/cclock33xx_data.c b/arch/arm/mach-omap2/cclock33xx_data.c index 6ebc7803bc3..af3544ce4f0 100644 --- a/arch/arm/mach-omap2/cclock33xx_data.c +++ b/arch/arm/mach-omap2/cclock33xx_data.c @@ -454,9 +454,29 @@ DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0, */ DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732); -DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0, - AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, - 0x0, NULL); +static struct clk clkdiv32k_ick; + +static const char *clkdiv32k_ick_parent_names[] = { + "clkdiv32k_ck", +}; + +static const struct clk_ops clkdiv32k_ick_ops = { + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, + .init = &omap2_init_clk_clkdm, +}; + +static struct clk_hw_omap clkdiv32k_ick_hw = { + .hw = { + .clk = &clkdiv32k_ick, + }, + .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL, + .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT, + .clkdm_name = "clk_24mhz_clkdm", +}; + +DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops); /* "usbotg_fck" is an additional clock and not really a modulemode */ DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0, diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c index 8f3bf4e5090..bbd6a3f717e 100644 --- a/arch/arm/mach-omap2/clock36xx.c +++ b/arch/arm/mach-omap2/clock36xx.c @@ -20,11 +20,12 @@ #include <linux/kernel.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/io.h> #include "clock.h" #include "clock36xx.h" - +#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) /** * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering @@ -39,29 +40,28 @@ */ int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk) { - struct clk_hw_omap *parent; + struct clk_divider *parent; struct clk_hw *parent_hw; - u32 dummy_v, orig_v, clksel_shift; + u32 dummy_v, orig_v; int ret; /* Clear PWRDN bit of HSDIVIDER */ ret = omap2_dflt_clk_enable(clk); parent_hw = __clk_get_hw(__clk_get_parent(clk->clk)); - parent = to_clk_hw_omap(parent_hw); + parent = to_clk_divider(parent_hw); /* Restore the dividers */ if (!ret) { - clksel_shift = __ffs(parent->clksel_mask); - orig_v = __raw_readl(parent->clksel_reg); + orig_v = __raw_readl(parent->reg); dummy_v = orig_v; /* Write any other value different from the Read value */ - dummy_v ^= (1 << clksel_shift); - __raw_writel(dummy_v, parent->clksel_reg); + dummy_v ^= (1 << parent->shift); + __raw_writel(dummy_v, parent->reg); /* Write the original divider */ - __raw_writel(orig_v, parent->clksel_reg); + __raw_writel(orig_v, parent->reg); } return ret; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d25a95fe992..7341eff63f5 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1356,13 +1356,27 @@ static void _enable_sysc(struct omap_hwmod *oh) clkdm = _get_clkdm(oh); if (sf & SYSC_HAS_SIDLEMODE) { + if (oh->flags & HWMOD_SWSUP_SIDLE || + oh->flags & HWMOD_SWSUP_SIDLE_ACT) { + idlemode = HWMOD_IDLEMODE_NO; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } + + /* + * This is special handling for some IPs like + * 32k sync timer. Force them to idle! + */ clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU); if (clkdm_act && !(oh->class->sysc->idlemodes & (SIDLE_SMART | SIDLE_SMART_WKUP))) idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + _set_slave_idlemode(oh, idlemode, &v); } @@ -1391,10 +1405,6 @@ static void _enable_sysc(struct omap_hwmod *oh) (sf & SYSC_HAS_CLOCKACTIVITY)) _set_clockactivity(oh, oh->class->sysc->clockact, &v); - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); /* @@ -1430,13 +1440,16 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ - if (oh->flags & HWMOD_SWSUP_SIDLE || - !(oh->class->sysc->idlemodes & - (SIDLE_SMART | SIDLE_SMART_WKUP))) + if (oh->flags & HWMOD_SWSUP_SIDLE) { idlemode = HWMOD_IDLEMODE_FORCE; - else - idlemode = HWMOD_IDLEMODE_SMART; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } _set_slave_idlemode(oh, idlemode, &v); } @@ -1455,10 +1468,6 @@ static void _idle_sysc(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - /* If slave is in SMARTIDLE, also enable wakeup */ - if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE)) - _enable_wakeup(oh, &v); - _write_sysconfig(v, oh); } @@ -2065,7 +2074,7 @@ static int _omap4_get_context_lost(struct omap_hwmod *oh) * do so is present in the hwmod data, then call it and pass along the * return value; otherwise, return 0. */ -static int __init _enable_preprogram(struct omap_hwmod *oh) +static int _enable_preprogram(struct omap_hwmod *oh) { if (!oh->class->enable_preprogram) return 0; @@ -2246,42 +2255,6 @@ static int _idle(struct omap_hwmod *oh) } /** - * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit - * @oh: struct omap_hwmod * - * @autoidle: desired AUTOIDLE bitfield value (0 or 1) - * - * Sets the IP block's OCP autoidle bit in hardware, and updates our - * local copy. Intended to be used by drivers that require - * direct manipulation of the AUTOIDLE bits. - * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes - * along the return value from _set_module_autoidle(). - * - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle) -{ - u32 v; - int retval = 0; - unsigned long flags; - - if (!oh || oh->_state != _HWMOD_STATE_ENABLED) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - - v = oh->_sysc_cache; - - retval = _set_module_autoidle(oh, autoidle, &v); - - if (!retval) - _write_sysconfig(v, oh); - - spin_unlock_irqrestore(&oh->_lock, flags); - - return retval; -} - -/** * _shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * * @@ -3180,38 +3153,6 @@ error: } /** - * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode - * @oh: struct omap_hwmod * - * @idlemode: SIDLEMODE field bits (shifted to bit 0) - * - * Sets the IP block's OCP slave idlemode in hardware, and updates our - * local copy. Intended to be used by drivers that have some erratum - * that requires direct manipulation of the SIDLEMODE bits. Returns - * -EINVAL if @oh is null, or passes along the return value from - * _set_slave_idlemode(). - * - * XXX Does this function have any current users? If not, we should - * remove it; it is better to let the rest of the hwmod code handle this. - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) -{ - u32 v; - int retval = 0; - - if (!oh) - return -EINVAL; - - v = oh->_sysc_cache; - - retval = _set_slave_idlemode(oh, idlemode, &v); - if (!retval) - _write_sysconfig(v, oh); - - return retval; -} - -/** * omap_hwmod_lookup - look up a registered omap_hwmod by name * @name: name of the omap_hwmod to look up * diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index fe5962921f0..0c898f58ac9 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm { * is kept in force-standby mode. Failing to do so causes PM problems * with musb on OMAP3630 at least. Note that musb has a dedicated register * to control MSTANDBY signal when MIDLEMODE is set to force-standby. + * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module + * out of idle, but rely on smart-idle to the put it back in idle, + * so the wakeups are still functional (Only known case for now is UART) */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) #define HWMOD_FORCE_MSTANDBY (1 << 11) +#define HWMOD_SWSUP_SIDLE_ACT (1 << 12) /* * omap_hwmod._int_flags definitions @@ -641,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); - int omap_hwmod_reset(struct omap_hwmod *oh); void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index c8c64b3e1ac..d05fc7b5456 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,6 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -531,6 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -550,6 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 01d8f324450..69337af748c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -1995,6 +1995,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart1_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_wkupdm_ck", @@ -2006,6 +2007,13 @@ static struct omap_hwmod am33xx_uart1_hwmod = { }, }; +/* uart2 */ +static struct omap_hwmod_dma_info uart2_edma_reqs[] = { + { .name = "tx", .dma_req = 28, }, + { .name = "rx", .dma_req = 29, }, + { .dma_req = -1 } +}; + static struct omap_hwmod_irq_info am33xx_uart2_irqs[] = { { .irq = 73 + OMAP_INTC_START, }, { .irq = -1 }, @@ -2015,8 +2023,9 @@ static struct omap_hwmod am33xx_uart2_hwmod = { .name = "uart2", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart2_irqs, - .sdma_reqs = uart1_edma_reqs, + .sdma_reqs = uart2_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", .prcm = { .omap4 = { @@ -2042,6 +2051,7 @@ static struct omap_hwmod am33xx_uart3_hwmod = { .name = "uart3", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart3_irqs, .sdma_reqs = uart3_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2062,6 +2072,7 @@ static struct omap_hwmod am33xx_uart4_hwmod = { .name = "uart4", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart4_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2082,6 +2093,7 @@ static struct omap_hwmod am33xx_uart5_hwmod = { .name = "uart5", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart5_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", @@ -2102,6 +2114,7 @@ static struct omap_hwmod am33xx_uart6_hwmod = { .name = "uart6", .class = &uart_class, .clkdm_name = "l4ls_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart6_irqs, .sdma_reqs = uart1_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4083606ea1d..31c7126eb3b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,6 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -508,6 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -526,6 +528,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -555,6 +558,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", + .flags = HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index eaba9dc91a0..848b6dc6759 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3434,6 +3434,7 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { .name = "uart1", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart1_irqs, .sdma_reqs = omap44xx_uart1_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3462,6 +3463,7 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { .name = "uart2", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart2_irqs, .sdma_reqs = omap44xx_uart2_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3490,7 +3492,8 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | + HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart3_irqs, .sdma_reqs = omap44xx_uart3_sdma_reqs, .main_clk = "func_48m_fclk", @@ -3519,6 +3522,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = omap44xx_uart4_irqs, .sdma_reqs = omap44xx_uart4_sdma_reqs, .main_clk = "func_48m_fclk", diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c01859398b5..5a2d8034c8d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -546,8 +546,10 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - if (omap3_has_iva()) - omap3_iva_idle(); + /* + * We need to idle iva2_pwrdm even on am3703 with no iva2. + */ + omap3_iva_idle(); omap3_d2d_idle(); } diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 8396b5b7e91..f6601563aa6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable) omap_hwmod_disable_wakeup(od->hwmods[0]); } -/* - * Errata i291: [UART]:Cannot Acknowledge Idle Requests - * in Smartidle Mode When Configured for DMA Operations. - * WA: configure uart in force idle mode. - */ -static void omap_uart_set_noidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - - omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO); -} - -static void omap_uart_set_smartidle(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_device *od = to_omap_device(pdev); - u8 idlemode; - - if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP) - idlemode = HWMOD_IDLEMODE_SMART_WKUP; - else - idlemode = HWMOD_IDLEMODE_SMART; - - omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode); -} - #else static void omap_uart_enable_wakeup(struct device *dev, bool enable) {} -static void omap_uart_set_noidle(struct device *dev) {} -static void omap_uart_set_smartidle(struct device *dev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX @@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.uartclk = OMAP24XX_BASE_BAUD * 16; omap_up.flags = UPF_BOOT_AUTOCONF; omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count; - omap_up.set_forceidle = omap_uart_set_smartidle; - omap_up.set_noidle = omap_uart_set_noidle; omap_up.enable_wakeup = omap_uart_enable_wakeup; omap_up.dma_rx_buf_size = info->dma_rx_buf_size; omap_up.dma_rx_timeout = info->dma_rx_timeout; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b97fd672e89..f8a6db9239b 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -199,13 +199,6 @@ void __init orion5x_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Orion5x devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); - /* Initialize the MBUS driver */ orion5x_pcie_id(&dev, &rev); if (dev == MV88F5281_DEV_ID) diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index 9936c180bf0..8f595c0cc8d 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -101,8 +101,10 @@ static int __init sirfsoc_of_pwrc_init(void) struct device_node *np; np = of_find_matching_node(NULL, pwrc_ids); - if (!np) - panic("unable to find compatible pwrc node in dtb\n"); + if (!np) { + pr_err("unable to find compatible sirf pwrc node in dtb\n"); + return -ENOENT; + } /* * pwrc behind rtciobrg is not located in memory space diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index 435019ca0a4..d5e0cbc934c 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -28,8 +28,10 @@ static int __init sirfsoc_of_rstc_init(void) struct device_node *np; np = of_find_matching_node(NULL, rstc_ids); - if (!np) - panic("unable to find compatible rstc node in dtb\n"); + if (!np) { + pr_err("unable to find compatible sirf rstc node in dtb\n"); + return -ENOENT; + } sirfsoc_rstc_base = of_iomap(np, 0); if (!sirfsoc_rstc_base) diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 91052855cc1..b9594e911ce 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -212,8 +212,8 @@ static struct platform_device *marzen_devices[] __initdata = { static struct usb_phy *phy; static int usb_power_on(struct platform_device *pdev) { - if (!phy) - return -EIO; + if (IS_ERR(phy)) + return PTR_ERR(phy); pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -225,7 +225,7 @@ static int usb_power_on(struct platform_device *pdev) static void usb_power_off(struct platform_device *pdev) { - if (!phy) + if (IS_ERR(phy)) return; usb_phy_shutdown(phy); diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index fdf3894b1cc..9696f364686 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -252,7 +252,7 @@ static struct sh_timer_config cmt10_platform_data = { .name = "CMT10", .channel_offset = 0x10, .timer_bit = 0, - .clockevent_rating = 125, + .clockevent_rating = 80, .clocksource_rating = 125, }; diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d259c782d74..5b045e302b4 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,5 +1,6 @@ config ARCH_SUNXI bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c index 9e8bdfa2b36..31e69a019bd 100644 --- a/arch/arm/mach-tegra/tegra2_emc.c +++ b/arch/arm/mach-tegra/tegra2_emc.c @@ -307,11 +307,6 @@ static int tegra_emc_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "missing register base\n"); - return -ENOMEM; - } - emc_regbase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(emc_regbase)) return PTR_ERR(emc_regbase); diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 6a4387e39df..b19b07204aa 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -51,6 +51,7 @@ config MACH_MOP500 bool "U8500 Development platform, MOP500 versions" select I2C select I2C_NOMADIK + select REGULATOR select REGULATOR_FIXED_VOLTAGE select SOC_BUS select UX500_SOC_DB8500 diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 33c353bc1c4..d6b7c8556fa 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -374,6 +374,7 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = { static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8500_LDO_AUX1] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-DISPLAY", .min_uV = 2800000, @@ -387,6 +388,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supplies to the on-board eMMC */ [AB8500_LDO_AUX2] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-eMMC1", .min_uV = 1100000, @@ -402,6 +404,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supply for VAUX3, supplies to SDcard slots */ [AB8500_LDO_AUX3] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-MMC-SD", .min_uV = 1100000, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 3cd555ac6d0..78389de94dd 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -623,7 +623,7 @@ static void __init mop500_init_machine(void) sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL; mop500_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; @@ -660,7 +660,7 @@ static void __init snowball_init_machine(void) sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO; snowball_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++) snowball_platform_devs[i]->dev.parent = parent; @@ -698,7 +698,7 @@ static void __init hrefv60_init_machine(void) sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO; hrefv60_pinmaps_init(); - parent = u8500_init_devices(&ab8500_platdata); + parent = u8500_init_devices(); for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) mop500_platform_devs[i]->dev.parent = parent; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index e90b5ab23b6..46cca52890b 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -206,7 +206,7 @@ static struct device * __init db8500_soc_device_init(void) /* * This function is called from the board init */ -struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) +struct device * __init u8500_init_devices(void) { struct device *parent; int i; @@ -220,8 +220,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; - db8500_prcmu_device.dev.platform_data = ab8500; - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return parent; @@ -278,7 +276,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), - OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x", NULL), + OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c index 317a2be129f..a45dd09daed 100644 --- a/arch/arm/mach-ux500/cpuidle.c +++ b/arch/arm/mach-ux500/cpuidle.c @@ -21,6 +21,7 @@ #include <asm/proc-fns.h> #include "db8500-regs.h" +#include "id.h" static atomic_t master = ATOMIC_INIT(0); static DEFINE_SPINLOCK(master_lock); @@ -114,6 +115,9 @@ static struct cpuidle_driver ux500_idle_driver = { int __init ux500_idle_init(void) { + if (!(cpu_is_u8500_family() || cpu_is_ux540_family())) + return -ENODEV; + /* Configure wake up reasons */ prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) | PRCMU_WAKEUP(ABB)); diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index bddce2b4937..cad3ca86c54 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -18,7 +18,7 @@ void __init ux500_map_io(void); extern void __init u8500_map_io(void); -extern struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500); +extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); extern void __init ux500_init_late(void); diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 1dd281efc02..f5c33df7a59 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -173,6 +173,7 @@ static const char * const vt8500_dt_compat[] = { "wm,wm8505", "wm,wm8750", "wm,wm8850", + NULL }; DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 15451ee4acc..515b00064da 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -92,6 +92,14 @@ ENTRY(v7_flush_dcache_louis) mrc p15, 1, r0, c0, c0, 1 @ read clidr, r0 = clidr ALT_SMP(ands r3, r0, #(7 << 21)) @ extract LoUIS from clidr ALT_UP(ands r3, r0, #(7 << 27)) @ extract LoUU from clidr +#ifdef CONFIG_ARM_ERRATA_643719 + ALT_SMP(mrceq p15, 0, r2, c0, c0, 0) @ read main ID register + ALT_UP(moveq pc, lr) @ LoUU is zero, so nothing to do + ldreq r1, =0x410fc090 @ ID of ARM Cortex A9 r0p? + biceq r2, r2, #0x0000000f @ clear minor revision number + teqeq r2, r1 @ test for errata affected core and if so... + orreqs r3, #(1 << 21) @ fix LoUIS value (and set flags state to 'ne') +#endif ALT_SMP(mov r3, r3, lsr #20) @ r3 = LoUIS * 2 ALT_UP(mov r3, r3, lsr #26) @ r3 = LoUU * 2 moveq pc, lr @ return if level == 0 diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 0d473cce501..32aa5861119 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -301,6 +301,39 @@ void flush_dcache_page(struct page *page) EXPORT_SYMBOL(flush_dcache_page); /* + * Ensure cache coherency for the kernel mapping of this page. We can + * assume that the page is pinned via kmap. + * + * If the page only exists in the page cache and there are no user + * space mappings, this is a no-op since the page was already marked + * dirty at creation. Otherwise, we need to flush the dirty kernel + * cache lines directly. + */ +void flush_kernel_dcache_page(struct page *page) +{ + if (cache_is_vivt() || cache_is_vipt_aliasing()) { + struct address_space *mapping; + + mapping = page_mapping(page); + + if (!mapping || mapping_mapped(mapping)) { + void *addr; + + addr = page_address(page); + /* + * kmap_atomic() doesn't set the page virtual + * address for highmem pages, and + * kunmap_atomic() takes care of cache + * flushing already. + */ + if (!IS_ENABLED(CONFIG_HIGHMEM) || addr) + __cpuc_flush_dcache_area(addr, PAGE_SIZE); + } + } +} +EXPORT_SYMBOL(flush_kernel_dcache_page); + +/* * Flush an anonymous page so that users of get_user_pages() * can safely access the data. The expected sequence is: * diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e0d8565671a..4d409e6a552 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -616,10 +616,12 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, } while (pte++, addr += PAGE_SIZE, addr != end); } -static void __init map_init_section(pmd_t *pmd, unsigned long addr, +static void __init __map_init_section(pmd_t *pmd, unsigned long addr, unsigned long end, phys_addr_t phys, const struct mem_type *type) { + pmd_t *p = pmd; + #ifndef CONFIG_ARM_LPAE /* * In classic MMU format, puds and pmds are folded in to @@ -638,7 +640,7 @@ static void __init map_init_section(pmd_t *pmd, unsigned long addr, phys += SECTION_SIZE; } while (pmd++, addr += SECTION_SIZE, addr != end); - flush_pmd_entry(pmd); + flush_pmd_entry(p); } static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, @@ -661,7 +663,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, */ if (type->prot_sect && ((addr | next | phys) & ~SECTION_MASK) == 0) { - map_init_section(pmd, addr, next, phys, type); + __map_init_section(pmd, addr, next, phys, type); } else { alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys), type); diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 2c73a7301ff..4c8c9c10a38 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -409,8 +409,8 @@ __v7_ca9mp_proc_info: */ .type __v7_pj4b_proc_info, #object __v7_pj4b_proc_info: - .long 0x562f5840 - .long 0xfffffff0 + .long 0x560f5800 + .long 0xff0fff00 __v7_proc __v7_pj4b_setup .size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 251f827271e..c019b7aaf77 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -383,7 +383,7 @@ static struct resource orion_ge10_shared_resources[] = { static struct platform_device orion_ge10_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 2, .dev = { .platform_data = &orion_ge10_shared_data, }, @@ -398,8 +398,8 @@ static struct resource orion_ge10_resources[] = { static struct platform_device orion_ge10 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 2, + .num_resources = 1, .resource = orion_ge10_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), @@ -432,7 +432,7 @@ static struct resource orion_ge11_shared_resources[] = { static struct platform_device orion_ge11_shared = { .name = MV643XX_ETH_SHARED_NAME, - .id = 1, + .id = 3, .dev = { .platform_data = &orion_ge11_shared_data, }, @@ -447,8 +447,8 @@ static struct resource orion_ge11_resources[] = { static struct platform_device orion_ge11 = { .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = 2, + .id = 3, + .num_resources = 1, .resource = orion_ge11_resources, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e06fc5fefa1..d9a24f605a2 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -10,6 +10,7 @@ #ifndef __PLAT_COMMON_H #include <linux/mv643xx_eth.h> +#include <linux/platform_data/usb-ehci-orion.h> struct dsa_platform_data; struct mv_sata_platform_data; diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index ca07cb1b155..79690f2f6d3 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -381,11 +381,6 @@ static int s3c_adc_probe(struct platform_device *pdev) } regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!regs) { - dev_err(dev, "failed to find registers\n"); - return -ENXIO; - } - adc->regs = devm_ioremap_resource(dev, regs); if (IS_ERR(adc->regs)) return PTR_ERR(adc->regs); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 30c2fe243f7..0f9c3f431a5 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -311,9 +311,9 @@ struct platform_device s5p_device_jpeg = { #ifdef CONFIG_S5P_DEV_FIMD0 static struct resource s5p_fimd0_resource[] = { [0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K), - [1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC), - [2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO), - [3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM), + [1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"), + [2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"), + [3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"), }; struct platform_device s5p_device_fimd0 = { diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index 438b24846e7..02b66d723d1 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -66,6 +66,9 @@ uart_rd(unsigned int reg) static void putc(int ch) { + if (!config_enabled(CONFIG_DEBUG_LL)) + return; + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { int level; @@ -118,7 +121,12 @@ static void arch_decomp_error(const char *x) #ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO static inline void arch_enable_uart_fifo(void) { - u32 fifocon = uart_rd(S3C2410_UFCON); + u32 fifocon; + + if (!config_enabled(CONFIG_DEBUG_LL)) + return; + + fifocon = uart_rd(S3C2410_UFCON); if (!(fifocon & S3C2410_UFCON_FIFOMODE)) { fifocon |= S3C2410_UFCON_RESETBOTH; diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 53210ec4e8e..bd7124c87fe 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -16,6 +16,7 @@ #include <linux/suspend.h> #include <linux/errno.h> #include <linux/delay.h> +#include <linux/of.h> #include <linux/serial_core.h> #include <linux/io.h> @@ -261,7 +262,8 @@ static int s3c_pm_enter(suspend_state_t state) * require a full power-cycle) */ - if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && + if (!of_have_populated_dt() && + !any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { printk(KERN_ERR "%s: No wake-up sources!\n", __func__); printk(KERN_ERR "%s: Aborting sleep\n", __func__); @@ -270,8 +272,11 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ - samsung_pm_save_gpios(); - samsung_pm_saved_gpios(); + if (!of_have_populated_dt()) { + samsung_pm_save_gpios(); + samsung_pm_saved_gpios(); + } + s3c_pm_save_uarts(); s3c_pm_save_core(); @@ -310,8 +315,11 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_restore_core(); s3c_pm_restore_uarts(); - samsung_pm_restore_gpios(); - s3c_pm_restored_gpios(); + + if (!of_have_populated_dt()) { + samsung_pm_restore_gpios(); + s3c_pm_restored_gpios(); + } s3c_pm_debug_init(); diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 323ce1a62bb..46e17492fd1 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -60,7 +60,7 @@ ENTRY(vfp_testing_entry) str r11, [r10, #TI_PREEMPT] #endif ldr r0, VFP_arch_address - str r5, [r0] @ known non-zero value + str r0, [r0] @ set to non-zero value mov pc, r9 @ we have handled the fault ENDPROC(vfp_testing_entry) diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index d30042e3997..13609e01f4b 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -152,11 +152,12 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma, } EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range); -static int __init xen_secondary_init(unsigned int cpu) +static void __init xen_percpu_init(void *unused) { struct vcpu_register_vcpu_info info; struct vcpu_info *vcpup; int err; + int cpu = get_cpu(); pr_info("Xen: initializing cpu%d\n", cpu); vcpup = per_cpu_ptr(xen_vcpu_info, cpu); @@ -165,14 +166,10 @@ static int __init xen_secondary_init(unsigned int cpu) info.offset = offset_in_page(vcpup); err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info); - if (err) { - pr_debug("register_vcpu_info failed: err=%d\n", err); - } else { - /* This cpu is using the registered vcpu info, even if - later ones fail to. */ - per_cpu(xen_vcpu, cpu) = vcpup; - } - return 0; + BUG_ON(err); + per_cpu(xen_vcpu, cpu) = vcpup; + + enable_percpu_irq(xen_events_irq, 0); } static void xen_restart(char str, const char *cmd) @@ -208,7 +205,6 @@ static int __init xen_guest_init(void) const char *version = NULL; const char *xen_prefix = "xen,xen-"; struct resource res; - int i; node = of_find_compatible_node(NULL, NULL, "xen,xen"); if (!node) { @@ -265,19 +261,23 @@ static int __init xen_guest_init(void) sizeof(struct vcpu_info)); if (xen_vcpu_info == NULL) return -ENOMEM; - for_each_online_cpu(i) - xen_secondary_init(i); gnttab_init(); if (!xen_initial_domain()) xenbus_probe(NULL); + return 0; +} +core_initcall(xen_guest_init); + +static int __init xen_pm_init(void) +{ pm_power_off = xen_power_off; arm_pm_restart = xen_restart; return 0; } -core_initcall(xen_guest_init); +subsys_initcall(xen_pm_init); static irqreturn_t xen_arm_callback(int irq, void *arg) { @@ -285,11 +285,6 @@ static irqreturn_t xen_arm_callback(int irq, void *arg) return IRQ_HANDLED; } -static __init void xen_percpu_enable_events(void *unused) -{ - enable_percpu_irq(xen_events_irq, 0); -} - static int __init xen_init_events(void) { if (!xen_domain() || xen_events_irq < 0) @@ -303,7 +298,7 @@ static int __init xen_init_events(void) return -EINVAL; } - on_each_cpu(xen_percpu_enable_events, NULL, 0); + on_each_cpu(xen_percpu_init, NULL, 0); return 0; } |