aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-common/entry.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-common/entry.S')
-rw-r--r--arch/blackfin/mach-common/entry.S76
1 files changed, 41 insertions, 35 deletions
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index a063a434f7e..da0558ad1b1 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -36,7 +36,6 @@
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/unistd.h>
-#include <linux/threads.h>
#include <asm/blackfin.h>
#include <asm/errno.h>
#include <asm/fixed_code.h>
@@ -201,7 +200,18 @@ ENTRY(_ex_single_step)
cc = r7 == 0;
if !cc jump 1f;
#endif
-
+#ifdef CONFIG_EXACT_HWERR
+ /* Read the ILAT, and to check to see if the process we are
+ * single stepping caused a previous hardware error
+ * If so, do not single step, (which lowers to IRQ5, and makes
+ * us miss the error).
+ */
+ p5.l = lo(ILAT);
+ p5.h = hi(ILAT);
+ r7 = [p5];
+ cc = bittst(r7, EVT_IVHW_P);
+ if cc jump 1f;
+#endif
/* Single stepping only a single instruction, so clear the trace
* bit here. */
r7 = syscfg;
@@ -263,15 +273,6 @@ ENTRY(_bfin_return_from_exception)
r6 = 0x25;
CC = R7 == R6;
if CC JUMP _double_fault;
-
- /* Did we cause a HW error? */
- p5.l = lo(ILAT);
- p5.h = hi(ILAT);
- r6 = [p5];
- r7 = 0x20; /* Did I just cause anther HW error? */
- r6 = r7 & r6;
- CC = R7 == R6;
- if CC JUMP _double_fault;
#endif
(R7:6,P5:4) = [sp++];
@@ -473,6 +474,16 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
[--sp] = ASTAT;
[--sp] = (R7:6,P5:4);
+#ifdef CONFIG_EXACT_HWERR
+ /* Make sure all pending read/writes complete. This will ensure any
+ * accesses which could cause hardware errors completes, and signal
+ * the the hardware before we do something silly, like crash the
+ * kernel. We don't need to work around anomaly 05000312, since
+ * we are already atomic
+ */
+ ssync;
+#endif
+
#if ANOMALY_05000283 || ANOMALY_05000315
cc = r7 == r7;
p5.h = HI(CHIPID);
@@ -855,7 +866,7 @@ ENTRY(_ret_from_exception)
p1.h = _schedule_and_signal;
[p0] = p1;
csync;
- raise 15; /* raise evt14 to do signal or reschedule */
+ raise 15; /* raise evt15 to do signal or reschedule */
4:
r0 = syscfg;
bitclr(r0, 0);
@@ -916,7 +927,7 @@ ENTRY(_return_from_int)
p1.h = _schedule_and_signal_from_int;
[p0] = p1;
csync;
-#if ANOMALY_05000281
+#if ANOMALY_05000281 || ANOMALY_05000461
r0.l = lo(SAFE_USER_INSTRUCTION);
r0.h = hi(SAFE_USER_INSTRUCTION);
reti = r0;
@@ -930,18 +941,27 @@ ENTRY(_return_from_int)
ENDPROC(_return_from_int)
ENTRY(_lower_to_irq14)
-#if ANOMALY_05000281
+#if ANOMALY_05000281 || ANOMALY_05000461
r0.l = lo(SAFE_USER_INSTRUCTION);
r0.h = hi(SAFE_USER_INSTRUCTION);
reti = r0;
#endif
- r0 = 0x401f;
+
+#ifdef CONFIG_DEBUG_HWERR
+ /* enable irq14 & hwerr interrupt, until we transition to _evt14_softirq */
+ r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+ /* Only enable irq14 interrupt, until we transition to _evt14_softirq */
+ r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
sti r0;
raise 14;
rti;
+ENDPROC(_lower_to_irq14)
+
ENTRY(_evt14_softirq)
#ifdef CONFIG_DEBUG_HWERR
- r0 = 0x3f;
+ r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
sti r0;
#else
cli r0;
@@ -949,8 +969,9 @@ ENTRY(_evt14_softirq)
[--sp] = RETI;
SP += 4;
rts;
+ENDPROC(_evt14_softirq)
-_schedule_and_signal_from_int:
+ENTRY(_schedule_and_signal_from_int)
/* To end up here, vector 15 was changed - so we have to change it
* back.
*/
@@ -983,8 +1004,9 @@ _schedule_and_signal_from_int:
call _finish_atomic_sections;
sp += 12;
jump.s .Lresume_userspace;
+ENDPROC(_schedule_and_signal_from_int)
-_schedule_and_signal:
+ENTRY(_schedule_and_signal)
SAVE_CONTEXT_SYSCALL
/* To end up here, vector 15 was changed - so we have to change it
* back.
@@ -1002,7 +1024,7 @@ _schedule_and_signal:
1:
RESTORE_CONTEXT
rti;
-ENDPROC(_lower_to_irq14)
+ENDPROC(_schedule_and_signal)
/* We handle this 100% in exception space - to reduce overhead
* Only potiential problem is if the software buffer gets swapped out of the
@@ -1588,19 +1610,3 @@ ENTRY(_sys_call_table)
.long _sys_ni_syscall
.endr
END(_sys_call_table)
-
-#ifdef CONFIG_EXCEPTION_L1_SCRATCH
-/* .section .l1.bss.scratch */
-.set _exception_stack_top, L1_SCRATCH_START + L1_SCRATCH_LENGTH
-#else
-#ifdef CONFIG_SYSCALL_TAB_L1
-.section .l1.bss
-#else
-.bss
-#endif
-ENTRY(_exception_stack)
- .rept 1024 * NR_CPUS
- .long 0
- .endr
-_exception_stack_top:
-#endif