diff options
Diffstat (limited to 'arch/m68k/atari')
| -rw-r--r-- | arch/m68k/atari/ataints.c | 152 | ||||
| -rw-r--r-- | arch/m68k/atari/config.c | 239 |
2 files changed, 391 insertions, 0 deletions
diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 3f41092d1b7..20cde4e9fc7 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -49,6 +49,7 @@ #include <asm/atari_stdma.h> #include <asm/irq.h> #include <asm/entry.h> +#include <asm/io.h> /* @@ -122,6 +123,136 @@ static struct irq_chip atari_irq_chip = { }; /* + * ST-MFP timer D chained interrupts - each driver gets its own timer + * interrupt instance. + */ + +struct mfptimerbase { + volatile struct MFP *mfp; + unsigned char mfp_mask, mfp_data; + unsigned short int_mask; + int handler_irq, mfptimer_irq, server_irq; + char *name; +} stmfp_base = { + .mfp = &st_mfp, + .int_mask = 0x0, + .handler_irq = IRQ_MFP_TIMD, + .mfptimer_irq = IRQ_MFP_TIMER1, + .name = "MFP Timer D" +}; + +static irqreturn_t mfptimer_handler(int irq, void *dev_id) +{ + struct mfptimerbase *base = dev_id; + int mach_irq; + unsigned char ints; + + mach_irq = base->mfptimer_irq; + ints = base->int_mask; + for (; ints; mach_irq++, ints >>= 1) { + if (ints & 1) + generic_handle_irq(mach_irq); + } + return IRQ_HANDLED; +} + + +static void atari_mfptimer_enable(struct irq_data *data) +{ + int mfp_num = data->irq - IRQ_MFP_TIMER1; + stmfp_base.int_mask |= 1 << mfp_num; + atari_enable_irq(IRQ_MFP_TIMD); +} + +static void atari_mfptimer_disable(struct irq_data *data) +{ + int mfp_num = data->irq - IRQ_MFP_TIMER1; + stmfp_base.int_mask &= ~(1 << mfp_num); + if (!stmfp_base.int_mask) + atari_disable_irq(IRQ_MFP_TIMD); +} + +static struct irq_chip atari_mfptimer_chip = { + .name = "timer_d", + .irq_enable = atari_mfptimer_enable, + .irq_disable = atari_mfptimer_disable, +}; + + +/* + * EtherNAT CPLD interrupt handling + * CPLD interrupt register is at phys. 0x80000023 + * Need this mapped in at interrupt startup time + * Possibly need this mapped on demand anyway - + * EtherNAT USB driver needs to disable IRQ before + * startup! + */ + +static unsigned char *enat_cpld; + +static unsigned int atari_ethernat_startup(struct irq_data *data) +{ + int enat_num = 140 - data->irq + 1; + + m68k_irq_startup(data); + /* + * map CPLD interrupt register + */ + if (!enat_cpld) + enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2); + /* + * do _not_ enable the USB chip interrupt here - causes interrupt storm + * and triggers dead interrupt watchdog + * Need to reset the USB chip to a sane state in early startup before + * removing this hack + */ + if (enat_num == 1) + *enat_cpld |= 1 << enat_num; + + return 0; +} + +static void atari_ethernat_enable(struct irq_data *data) +{ + int enat_num = 140 - data->irq + 1; + /* + * map CPLD interrupt register + */ + if (!enat_cpld) + enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2); + *enat_cpld |= 1 << enat_num; +} + +static void atari_ethernat_disable(struct irq_data *data) +{ + int enat_num = 140 - data->irq + 1; + /* + * map CPLD interrupt register + */ + if (!enat_cpld) + enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2); + *enat_cpld &= ~(1 << enat_num); +} + +static void atari_ethernat_shutdown(struct irq_data *data) +{ + int enat_num = 140 - data->irq + 1; + if (enat_cpld) { + *enat_cpld &= ~(1 << enat_num); + iounmap(enat_cpld); + enat_cpld = NULL; + } +} + +static struct irq_chip atari_ethernat_chip = { + .name = "ethernat", + .irq_startup = atari_ethernat_startup, + .irq_shutdown = atari_ethernat_shutdown, + .irq_enable = atari_ethernat_enable, + .irq_disable = atari_ethernat_disable, +}; + +/* * void atari_init_IRQ (void) * * Parameters: None @@ -198,6 +329,27 @@ void __init atari_init_IRQ(void) /* Initialize the PSG: all sounds off, both ports output */ sound_ym.rd_data_reg_sel = 7; sound_ym.wd_data = 0xff; + + m68k_setup_irq_controller(&atari_mfptimer_chip, handle_simple_irq, + IRQ_MFP_TIMER1, 8); + + /* prepare timer D data for use as poll interrupt */ + /* set Timer D data Register - needs to be > 0 */ + st_mfp.tim_dt_d = 254; /* < 100 Hz */ + /* start timer D, div = 1:100 */ + st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 0xf0) | 0x6; + + /* request timer D dispatch handler */ + if (request_irq(IRQ_MFP_TIMD, mfptimer_handler, IRQF_SHARED, + stmfp_base.name, &stmfp_base)) + pr_err("Couldn't register %s interrupt\n", stmfp_base.name); + + /* + * EtherNAT ethernet / USB interrupt handlers + */ + + m68k_setup_irq_controller(&atari_ethernat_chip, handle_simple_irq, + 139, 2); } diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c index 037c11c9933..fb2d0bd9b3a 100644 --- a/arch/m68k/atari/config.c +++ b/arch/m68k/atari/config.c @@ -31,6 +31,8 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/usb/isp116x.h> #include <linux/vt_kern.h> #include <linux/module.h> @@ -655,3 +657,240 @@ static void atari_get_hardware_list(struct seq_file *m) ATARIHW_ANNOUNCE(VME, "VME Bus"); ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor"); } + +/* + * MSch: initial platform device support for Atari, + * required for EtherNAT/EtherNEC/NetUSBee drivers + */ + +#if defined(CONFIG_ATARI_ETHERNAT) || defined(CONFIG_ATARI_ETHERNEC) +static void isp1160_delay(struct device *dev, int delay) +{ + ndelay(delay); +} +#endif + +#ifdef CONFIG_ATARI_ETHERNAT +/* + * EtherNAT: SMC91C111 Ethernet chipset, handled by smc91x driver + */ + +#define ATARI_ETHERNAT_IRQ 140 + +static struct resource smc91x_resources[] = { + [0] = { + .name = "smc91x-regs", + .start = ATARI_ETHERNAT_PHYS_ADDR, + .end = ATARI_ETHERNAT_PHYS_ADDR + 0xfffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "smc91x-irq", + .start = ATARI_ETHERNAT_IRQ, + .end = ATARI_ETHERNAT_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +/* + * ISP 1160 - using the isp116x-hcd module + */ + +#define ATARI_USB_PHYS_ADDR 0x80000012 +#define ATARI_USB_IRQ 139 + +static struct resource isp1160_resources[] = { + [0] = { + .name = "isp1160-data", + .start = ATARI_USB_PHYS_ADDR, + .end = ATARI_USB_PHYS_ADDR + 0x1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "isp1160-regs", + .start = ATARI_USB_PHYS_ADDR + 0x4, + .end = ATARI_USB_PHYS_ADDR + 0x5, + .flags = IORESOURCE_MEM, + }, + [2] = { + .name = "isp1160-irq", + .start = ATARI_USB_IRQ, + .end = ATARI_USB_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */ +static struct isp116x_platform_data isp1160_platform_data = { + /* Enable internal resistors on downstream ports */ + .sel15Kres = 1, + /* On-chip overcurrent protection */ + .oc_enable = 1, + /* INT output polarity */ + .int_act_high = 1, + /* INT edge or level triggered */ + .int_edge_triggered = 0, + + /* WAKEUP pin connected - NOT SUPPORTED */ + /* .remote_wakeup_connected = 0, */ + /* Wakeup by devices on usb bus enabled */ + .remote_wakeup_enable = 0, + .delay = isp1160_delay, +}; + +static struct platform_device isp1160_device = { + .name = "isp116x-hcd", + .id = 0, + .num_resources = ARRAY_SIZE(isp1160_resources), + .resource = isp1160_resources, + .dev = { + .platform_data = &isp1160_platform_data, + }, +}; + +static struct platform_device *atari_ethernat_devices[] __initdata = { + &smc91x_device, + &isp1160_device +}; +#endif /* CONFIG_ATARI_ETHERNAT */ + +#ifdef CONFIG_ATARI_ETHERNEC +/* + * EtherNEC: RTL8019 (NE2000 compatible) Ethernet chipset, + * handled by ne.c driver + */ + +#define ATARI_ETHERNEC_PHYS_ADDR 0xfffa0000 +#define ATARI_ETHERNEC_BASE 0x300 +#define ATARI_ETHERNEC_IRQ IRQ_MFP_TIMER1 + +static struct resource rtl8019_resources[] = { + [0] = { + .name = "rtl8019-regs", + .start = ATARI_ETHERNEC_BASE, + .end = ATARI_ETHERNEC_BASE + 0x20 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + .name = "rtl8019-irq", + .start = ATARI_ETHERNEC_IRQ, + .end = ATARI_ETHERNEC_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtl8019_device = { + .name = "ne", + .id = -1, + .num_resources = ARRAY_SIZE(rtl8019_resources), + .resource = rtl8019_resources, +}; + +/* + * NetUSBee: ISP1160 USB host adapter via ROM-port adapter + */ + +#define ATARI_NETUSBEE_PHYS_ADDR 0xfffa8000 +#define ATARI_NETUSBEE_BASE 0x340 +#define ATARI_NETUSBEE_IRQ IRQ_MFP_TIMER2 + +static struct resource netusbee_resources[] = { + [0] = { + .name = "isp1160-data", + .start = ATARI_NETUSBEE_BASE, + .end = ATARI_NETUSBEE_BASE + 0x1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "isp1160-regs", + .start = ATARI_NETUSBEE_BASE + 0x20, + .end = ATARI_NETUSBEE_BASE + 0x21, + .flags = IORESOURCE_MEM, + }, + [2] = { + .name = "isp1160-irq", + .start = ATARI_NETUSBEE_IRQ, + .end = ATARI_NETUSBEE_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */ +static struct isp116x_platform_data netusbee_platform_data = { + /* Enable internal resistors on downstream ports */ + .sel15Kres = 1, + /* On-chip overcurrent protection */ + .oc_enable = 1, + /* INT output polarity */ + .int_act_high = 1, + /* INT edge or level triggered */ + .int_edge_triggered = 0, + + /* WAKEUP pin connected - NOT SUPPORTED */ + /* .remote_wakeup_connected = 0, */ + /* Wakeup by devices on usb bus enabled */ + .remote_wakeup_enable = 0, + .delay = isp1160_delay, +}; + +static struct platform_device netusbee_device = { + .name = "isp116x-hcd", + .id = 1, + .num_resources = ARRAY_SIZE(netusbee_resources), + .resource = netusbee_resources, + .dev = { + .platform_data = &netusbee_platform_data, + }, +}; + +static struct platform_device *atari_netusbee_devices[] __initdata = { + &rtl8019_device, + &netusbee_device +}; +#endif /* CONFIG_ATARI_ETHERNEC */ + +int __init atari_platform_init(void) +{ + int rv = 0; + + if (!MACH_IS_ATARI) + return -ENODEV; + +#ifdef CONFIG_ATARI_ETHERNAT + { + unsigned char *enatc_virt; + enatc_virt = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0xf); + if (hwreg_present(enatc_virt)) { + rv = platform_add_devices(atari_ethernat_devices, + ARRAY_SIZE(atari_ethernat_devices)); + } + iounmap(enatc_virt); + } +#endif + +#ifdef CONFIG_ATARI_ETHERNEC + { + int error; + unsigned char *enec_virt; + enec_virt = (unsigned char *)ioremap((ATARI_ETHERNEC_PHYS_ADDR), 0xf); + if (hwreg_present(enec_virt)) { + error = platform_add_devices(atari_netusbee_devices, + ARRAY_SIZE(atari_netusbee_devices)); + if (error && !rv) + rv = error; + } + iounmap(enec_virt); + } +#endif + + return rv; +} + +arch_initcall(atari_platform_init); |