diff options
Diffstat (limited to 'arch/mips/cavium-octeon/executive')
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-bootmem.c | 10 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-board.c | 28 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c | 4 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c | 22 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c | 4 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-spi.c | 8 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-util.c | 34 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c | 4 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper.c | 10 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c | 6 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-l2c.c | 66 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-pko.c | 28 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-spi.c | 70 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-sysinfo.c | 16 |
14 files changed, 155 insertions, 155 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c index 6d5ddbc112c..504ed61a47c 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c +++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c @@ -155,8 +155,8 @@ int cvmx_bootmem_init(void *mem_desc_ptr) * * Linux 64 bit: Set XKPHYS bit * Linux 32 bit: use mmap to create mapping, use virtual address - * CVMX 64 bit: use physical address directly - * CVMX 32 bit: use physical address directly + * CVMX 64 bit: use physical address directly + * CVMX 32 bit: use physical address directly * * Note that the CVMX environment assumes the use of 1-1 TLB * mappings so that the physical addresses can be used @@ -398,7 +398,7 @@ error_out: int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags) { uint64_t cur_addr; - uint64_t prev_addr = 0; /* zero is invalid */ + uint64_t prev_addr = 0; /* zero is invalid */ int retval = 0; #ifdef DEBUG @@ -424,7 +424,7 @@ int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags) if (cur_addr == 0 || phy_addr < cur_addr) { /* add at front of list - special case with changing head ptr */ if (cur_addr && phy_addr + size > cur_addr) - goto bootmem_free_done; /* error, overlapping section */ + goto bootmem_free_done; /* error, overlapping section */ else if (phy_addr + size == cur_addr) { /* Add to front of existing first block */ cvmx_bootmem_phy_set_next(phy_addr, @@ -611,7 +611,7 @@ int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags) } cvmx_bootmem_unlock(); - return named_block_ptr != NULL; /* 0 on failure, 1 on success */ + return named_block_ptr != NULL; /* 0 on failure, 1 on success */ } int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr, diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c index fd2015331a2..7c649778189 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c @@ -203,10 +203,10 @@ int cvmx_helper_board_get_mii_address(int ipd_port) * enumeration from the bootloader. * * @ipd_port: IPD input port associated with the port we want to get link - * status for. + * status for. * * Returns The ports link status. If the link isn't fully resolved, this must - * return zero. + * return zero. */ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) { @@ -357,16 +357,16 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) result.s.link_up = 1; result.s.full_duplex = ((phy_status >> 13) & 1); switch ((phy_status >> 14) & 3) { - case 0: /* 10 Mbps */ + case 0: /* 10 Mbps */ result.s.speed = 10; break; - case 1: /* 100 Mbps */ + case 1: /* 100 Mbps */ result.s.speed = 100; break; - case 2: /* 1 Gbps */ + case 2: /* 1 Gbps */ result.s.speed = 1000; break; - case 3: /* Illegal */ + case 3: /* Illegal */ result.u64 = 0; break; } @@ -391,16 +391,16 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) result.s.link_up = inband_status.s.status; result.s.full_duplex = inband_status.s.duplex; switch (inband_status.s.speed) { - case 0: /* 10 Mbps */ + case 0: /* 10 Mbps */ result.s.speed = 10; break; - case 1: /* 100 Mbps */ + case 1: /* 100 Mbps */ result.s.speed = 100; break; - case 2: /* 1 Gbps */ + case 2: /* 1 Gbps */ result.s.speed = 1000; break; - case 3: /* Illegal */ + case 3: /* Illegal */ result.u64 = 0; break; } @@ -429,9 +429,9 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) * * @phy_addr: The address of the PHY to program * @enable_autoneg: - * Non zero if you want to enable auto-negotiation. + * Non zero if you want to enable auto-negotiation. * @link_info: Link speed to program. If the speed is zero and auto-negotiation - * is enabled, all possible negotiation speeds are advertised. + * is enabled, all possible negotiation speeds are advertised. * * Returns Zero on success, negative on failure */ @@ -607,10 +607,10 @@ int cvmx_helper_board_link_set_phy(int phy_addr, * * @interface: Interface to probe * @supported_ports: - * Number of ports Octeon supports. + * Number of ports Octeon supports. * * Returns Number of ports the actual board supports. Many times this will - * simple be "support_ports". + * simple be "support_ports". */ int __cvmx_helper_board_interface_probe(int interface, int supported_ports) { diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c index c1c54890bae..607b4e65957 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c @@ -79,10 +79,10 @@ void cvmx_helper_qlm_jtag_init(void) * @qlm: QLM to shift value into * @bits: Number of bits to shift in (1-32). * @data: Data to shift in. Bit 0 enters the chain first, followed by - * bit 1, etc. + * bit 1, etc. * * Returns The low order bits of the JTAG chain that shifted out of the - * circle. + * circle. */ uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data) { diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c index 82b21843421..f59c88ee9b3 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c @@ -131,7 +131,7 @@ void cvmx_helper_rgmii_internal_loopback(int port) * @interface: Interface to setup * @port: Port to setup (0..3) * @cpu_clock_hz: - * Chip frequency in Hertz + * Chip frequency in Hertz * * Returns Zero on success, negative on failure */ @@ -409,14 +409,14 @@ int __cvmx_helper_rgmii_link_set(int ipd_port, mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); /* - * Port .en .type .p0mii Configuration - * ---- --- ----- ------ ----------------------------------------- - * X 0 X X All links are disabled. - * 0 1 X 0 Port 0 is RGMII - * 0 1 X 1 Port 0 is MII - * 1 1 0 X Ports 1 and 2 are configured as RGMII ports. - * 1 1 1 X Port 1: GMII/MII; Port 2: disabled. GMII or - * MII port is selected by GMX_PRT1_CFG[SPEED]. + * Port .en .type .p0mii Configuration + * ---- --- ----- ------ ----------------------------------------- + * X 0 X X All links are disabled. + * 0 1 X 0 Port 0 is RGMII + * 0 1 X 1 Port 0 is MII + * 1 1 0 X Ports 1 and 2 are configured as RGMII ports. + * 1 1 1 X Port 1: GMII/MII; Port 2: disabled. GMII or + * MII port is selected by GMX_PRT1_CFG[SPEED]. */ /* In MII mode, CLK_CNT = 1. */ @@ -464,9 +464,9 @@ int __cvmx_helper_rgmii_link_set(int ipd_port, * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c index 0c0bf5d30e7..45f18cce31a 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c @@ -523,9 +523,9 @@ int __cvmx_helper_sgmii_link_set(int ipd_port, * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c index 2830e4bdf7f..1f3030c72d8 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c @@ -160,16 +160,16 @@ cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port) result.s.link_up = inband.s.status; result.s.full_duplex = inband.s.duplex; switch (inband.s.speed) { - case 0: /* 10 Mbps */ + case 0: /* 10 Mbps */ result.s.speed = 10; break; - case 1: /* 100 Mbps */ + case 1: /* 100 Mbps */ result.s.speed = 100; break; - case 2: /* 1 Gbps */ + case 2: /* 1 Gbps */ result.s.speed = 1000; break; - case 3: /* Illegal */ + case 3: /* Illegal */ result.s.speed = 0; result.s.link_up = 0; break; diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c index dfdfe8bdc9c..65d2bc9a0bd 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c @@ -96,9 +96,9 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work) uint8_t *end_of_data; cvmx_dprintf("Packet Length: %u\n", work->len); - cvmx_dprintf(" Input Port: %u\n", work->ipprt); - cvmx_dprintf(" QoS: %u\n", work->qos); - cvmx_dprintf(" Buffers: %u\n", work->word2.s.bufs); + cvmx_dprintf(" Input Port: %u\n", work->ipprt); + cvmx_dprintf(" QoS: %u\n", work->qos); + cvmx_dprintf(" Buffers: %u\n", work->word2.s.bufs); if (work->word2.s.bufs == 0) { union cvmx_ipd_wqe_fpa_queue wqe_pool; @@ -132,14 +132,14 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work) while (remaining_bytes) { start_of_buffer = ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7; - cvmx_dprintf(" Buffer Start:%llx\n", + cvmx_dprintf(" Buffer Start:%llx\n", (unsigned long long)start_of_buffer); - cvmx_dprintf(" Buffer I : %u\n", buffer_ptr.s.i); - cvmx_dprintf(" Buffer Back: %u\n", buffer_ptr.s.back); - cvmx_dprintf(" Buffer Pool: %u\n", buffer_ptr.s.pool); - cvmx_dprintf(" Buffer Data: %llx\n", + cvmx_dprintf(" Buffer I : %u\n", buffer_ptr.s.i); + cvmx_dprintf(" Buffer Back: %u\n", buffer_ptr.s.back); + cvmx_dprintf(" Buffer Pool: %u\n", buffer_ptr.s.pool); + cvmx_dprintf(" Buffer Data: %llx\n", (unsigned long long)buffer_ptr.s.addr); - cvmx_dprintf(" Buffer Size: %u\n", buffer_ptr.s.size); + cvmx_dprintf(" Buffer Size: %u\n", buffer_ptr.s.size); cvmx_dprintf("\t\t"); data_address = (uint8_t *) cvmx_phys_to_ptr(buffer_ptr.s.addr); @@ -172,11 +172,11 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work) * * @queue: Input queue to setup RED on (0-7) * @pass_thresh: - * Packets will begin slowly dropping when there are less than - * this many packet buffers free in FPA 0. + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. * @drop_thresh: - * All incoming packets will be dropped when there are less - * than this many free packet buffers in FPA 0. + * All incoming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh) @@ -207,11 +207,11 @@ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh) * Setup Random Early Drop to automatically begin dropping packets. * * @pass_thresh: - * Packets will begin slowly dropping when there are less than - * this many packet buffers free in FPA 0. + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. * @drop_thresh: - * All incoming packets will be dropped when there are less - * than this many free packet buffers in FPA 0. + * All incoming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ int cvmx_helper_setup_red(int pass_thresh, int drop_thresh) diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c index 1723248e987..7653b7e9219 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c @@ -321,9 +321,9 @@ int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info) * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c index fa496385635..d63d20dfbfb 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c @@ -111,7 +111,7 @@ int cvmx_helper_ports_on_interface(int interface) * @interface: Interface to probe * * Returns Mode of the interface. Unknown or unsupported interfaces return - * DISABLED. + * DISABLED. */ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface) { @@ -187,7 +187,7 @@ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface) * the defines in executive-config.h. * * @ipd_port: Port to configure. This follows the IPD numbering, not the - * per interface numbering + * per interface numbering * * Returns Zero on success, negative on failure */ @@ -591,7 +591,7 @@ static int __cvmx_helper_packet_hardware_enable(int interface) * Function to adjust internal IPD pointer alignments * * Returns 0 on success - * !0 on failure + * !0 on failure */ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void) { @@ -1068,9 +1068,9 @@ int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info) * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c index 560e034aa02..fa327ec891c 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c +++ b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c @@ -85,11 +85,11 @@ void __cvmx_interrupt_gmxx_enable(int interface) if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { if (mode.s.en) { switch (mode.cn56xx.mode) { - case 1: /* XAUI */ + case 1: /* XAUI */ num_ports = 1; break; - case 2: /* SGMII */ - case 3: /* PICMG */ + case 2: /* SGMII */ + case 3: /* PICMG */ num_ports = 4; break; default: /* Disabled */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c index 33b72144db3..42e38c30b54 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-l2c.c +++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c @@ -147,7 +147,7 @@ int cvmx_l2c_set_hw_way_partition(uint32_t mask) mask &= valid_mask; /* A UMSK setting which blocks all L2C Ways is an error on some chips */ - if (mask == valid_mask && !OCTEON_IS_MODEL(OCTEON_CN63XX)) + if (mask == valid_mask && !OCTEON_IS_MODEL(OCTEON_CN63XX)) return -1; if (OCTEON_IS_MODEL(OCTEON_CN63XX)) @@ -438,7 +438,7 @@ void cvmx_l2c_flush(void) for (set = 0; set < n_set; set++) { for (assoc = 0; assoc < n_assoc; assoc++) { address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, - (assoc << assoc_shift) | (set << set_shift)); + (assoc << assoc_shift) | (set << set_shift)); CVMX_CACHE_WBIL2I(address, 0); } } @@ -573,8 +573,8 @@ union __cvmx_l2c_tag { * @index: Index of the cacheline * * Returns The Octeon model specific tag structure. This is - * translated by a wrapper function to a generic form that is - * easier for applications to use. + * translated by a wrapper function to a generic form that is + * easier for applications to use. */ static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index) { @@ -618,12 +618,12 @@ static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index) ".set push\n\t" ".set mips64\n\t" ".set noreorder\n\t" - "sd %[dbg_val], 0(%[dbg_addr])\n\t" /* Enter debug mode, wait for store */ + "sd %[dbg_val], 0(%[dbg_addr])\n\t" /* Enter debug mode, wait for store */ "ld $0, 0(%[dbg_addr])\n\t" - "ld %[tag_val], 0(%[tag_addr])\n\t" /* Read L2C tag data */ - "sd $0, 0(%[dbg_addr])\n\t" /* Exit debug mode, wait for store */ + "ld %[tag_val], 0(%[tag_addr])\n\t" /* Read L2C tag data */ + "sd $0, 0(%[dbg_addr])\n\t" /* Exit debug mode, wait for store */ "ld $0, 0(%[dbg_addr])\n\t" - "cache 9, 0($0)\n\t" /* Invalidate dcache to discard debug data */ + "cache 9, 0($0)\n\t" /* Invalidate dcache to discard debug data */ ".set pop" : [tag_val] "=r" (tag_val) : [dbg_addr] "r" (dbg_addr), [dbg_val] "r" (debug_val), [tag_addr] "r" (debug_tag_addr) @@ -664,10 +664,10 @@ union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index) CVMX_SYNC; /* make sure CVMX_L2C_TADX_TAG is updated */ l2c_tadx_tag.u64 = cvmx_read_csr(CVMX_L2C_TADX_TAG(0)); - tag.s.V = l2c_tadx_tag.s.valid; - tag.s.D = l2c_tadx_tag.s.dirty; - tag.s.L = l2c_tadx_tag.s.lock; - tag.s.U = l2c_tadx_tag.s.use; + tag.s.V = l2c_tadx_tag.s.valid; + tag.s.D = l2c_tadx_tag.s.dirty; + tag.s.L = l2c_tadx_tag.s.lock; + tag.s.U = l2c_tadx_tag.s.use; tag.s.addr = l2c_tadx_tag.s.tag; } else { union __cvmx_l2c_tag tmp_tag; @@ -679,34 +679,34 @@ union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index) * as it can represent all models. */ if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) { - tag.s.V = tmp_tag.cn58xx.V; - tag.s.D = tmp_tag.cn58xx.D; - tag.s.L = tmp_tag.cn58xx.L; - tag.s.U = tmp_tag.cn58xx.U; + tag.s.V = tmp_tag.cn58xx.V; + tag.s.D = tmp_tag.cn58xx.D; + tag.s.L = tmp_tag.cn58xx.L; + tag.s.U = tmp_tag.cn58xx.U; tag.s.addr = tmp_tag.cn58xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { - tag.s.V = tmp_tag.cn38xx.V; - tag.s.D = tmp_tag.cn38xx.D; - tag.s.L = tmp_tag.cn38xx.L; - tag.s.U = tmp_tag.cn38xx.U; + tag.s.V = tmp_tag.cn38xx.V; + tag.s.D = tmp_tag.cn38xx.D; + tag.s.L = tmp_tag.cn38xx.L; + tag.s.U = tmp_tag.cn38xx.U; tag.s.addr = tmp_tag.cn38xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { - tag.s.V = tmp_tag.cn31xx.V; - tag.s.D = tmp_tag.cn31xx.D; - tag.s.L = tmp_tag.cn31xx.L; - tag.s.U = tmp_tag.cn31xx.U; + tag.s.V = tmp_tag.cn31xx.V; + tag.s.D = tmp_tag.cn31xx.D; + tag.s.L = tmp_tag.cn31xx.L; + tag.s.U = tmp_tag.cn31xx.U; tag.s.addr = tmp_tag.cn31xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) { - tag.s.V = tmp_tag.cn30xx.V; - tag.s.D = tmp_tag.cn30xx.D; - tag.s.L = tmp_tag.cn30xx.L; - tag.s.U = tmp_tag.cn30xx.U; + tag.s.V = tmp_tag.cn30xx.V; + tag.s.D = tmp_tag.cn30xx.D; + tag.s.L = tmp_tag.cn30xx.L; + tag.s.U = tmp_tag.cn30xx.U; tag.s.addr = tmp_tag.cn30xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) { - tag.s.V = tmp_tag.cn50xx.V; - tag.s.D = tmp_tag.cn50xx.D; - tag.s.L = tmp_tag.cn50xx.L; - tag.s.U = tmp_tag.cn50xx.U; + tag.s.V = tmp_tag.cn50xx.V; + tag.s.D = tmp_tag.cn50xx.D; + tag.s.L = tmp_tag.cn50xx.L; + tag.s.U = tmp_tag.cn50xx.U; tag.s.addr = tmp_tag.cn50xx.addr; } else { cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__); @@ -865,7 +865,7 @@ void cvmx_l2c_flush_line(uint32_t assoc, uint32_t index) uint64_t address; /* Create the address based on index and association. * Bits<20:17> select the way of the cache block involved in - * the operation + * the operation * Bits<16:7> of the effect address select the index */ address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c index f557084b109..f2c87754159 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-pko.c +++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c @@ -99,7 +99,7 @@ void cvmx_pko_initialize_global(void) * be called after the FPA has been initialized and filled with pages. * * Returns 0 on success - * !0 on failure + * !0 on failure */ int cvmx_pko_initialize_local(void) { @@ -186,19 +186,19 @@ void cvmx_pko_shutdown(void) /** * Configure a output port and the associated queues for use. * - * @port: Port to configure. + * @port: Port to configure. * @base_queue: First queue number to associate with this port. * @num_queues: Number of queues to associate with this port - * @priority: Array of priority levels for each queue. Values are - * allowed to be 0-8. A value of 8 get 8 times the traffic - * of a value of 1. A value of 0 indicates that no rounds - * will be participated in. These priorities can be changed - * on the fly while the pko is enabled. A priority of 9 - * indicates that static priority should be used. If static - * priority is used all queues with static priority must be - * contiguous starting at the base_queue, and lower numbered - * queues have higher priority than higher numbered queues. - * There must be num_queues elements in the array. + * @priority: Array of priority levels for each queue. Values are + * allowed to be 0-8. A value of 8 get 8 times the traffic + * of a value of 1. A value of 0 indicates that no rounds + * will be participated in. These priorities can be changed + * on the fly while the pko is enabled. A priority of 9 + * indicates that static priority should be used. If static + * priority is used all queues with static priority must be + * contiguous starting at the base_queue, and lower numbered + * queues have higher priority than higher numbered queues. + * There must be num_queues elements in the array. */ cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue, uint64_t num_queues, @@ -440,7 +440,7 @@ void cvmx_pko_show_queue_map() * @port: Port to rate limit * @packets_s: Maximum packet/sec * @burst: Maximum number of packets to burst in a row before rate - * limiting cuts in. + * limiting cuts in. * * Returns Zero on success, negative on failure */ @@ -473,7 +473,7 @@ int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst) * @port: Port to rate limit * @bits_s: PKO rate limit in bits/sec * @burst: Maximum number of bits to burst before rate - * limiting cuts in. + * limiting cuts in. * * Returns Zero on success, negative on failure */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-spi.c b/arch/mips/cavium-octeon/executive/cvmx-spi.c index 74afb1710cd..ef5198d13a0 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-spi.c +++ b/arch/mips/cavium-octeon/executive/cvmx-spi.c @@ -69,7 +69,7 @@ static cvmx_spi_callbacks_t cvmx_spi_callbacks = { /** * Get current SPI4 initialization callbacks * - * @callbacks: Pointer to the callbacks structure.to fill + * @callbacks: Pointer to the callbacks structure.to fill * * Returns Pointer to cvmx_spi_callbacks_t structure. */ @@ -92,11 +92,11 @@ void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks) * Initialize and start the SPI interface. * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * @num_ports: Number of SPI ports to configure * @@ -138,11 +138,11 @@ int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, int timeout, * with its correspondent system. * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * * Returns Zero on success, negative of failure. @@ -160,7 +160,7 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout) INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface, mode); /* NOTE: Calendar setup is not performed during restart */ - /* Refer to cvmx_spi_start_interface() for the full sequence */ + /* Refer to cvmx_spi_start_interface() for the full sequence */ /* Callback to perform clock detection */ INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout); @@ -182,11 +182,11 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to perform SPI4 reset * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * * Returns Zero on success, non-zero error code on failure (will cause * SPI initialization to abort) @@ -297,11 +297,11 @@ int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode) * Callback to setup calendar and miscellaneous settings before clock detection * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @num_ports: Number of ports to configure on SPI * * Returns Zero on success, non-zero error code on failure (will cause @@ -382,7 +382,7 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, stxx_spi4_dat.u64 = 0; /*Minimum needed by dynamic alignment */ stxx_spi4_dat.s.alpha = 32; - stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */ + stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */ cvmx_write_csr(CVMX_STXX_SPI4_DAT(interface), stxx_spi4_dat.u64); @@ -416,11 +416,11 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, * Callback to perform clock detection * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * * Returns Zero on success, non-zero error code on failure (will cause @@ -494,11 +494,11 @@ int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to perform link training * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for link to be trained (in seconds) * * Returns Zero on success, non-zero error code on failure (will cause @@ -563,11 +563,11 @@ int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to perform calendar data synchronization * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for calendar data in seconds * * Returns Zero on success, non-zero error code on failure (will cause @@ -620,11 +620,11 @@ int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to handle interface up * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * * Returns Zero on success, non-zero error code on failure (will cause * SPI initialization to abort) diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c index 8b18a20cc7b..3d17fac2935 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c +++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c @@ -74,26 +74,26 @@ EXPORT_SYMBOL(cvmx_sysinfo_get); /** * This function is used in non-simple executive environments (such as - * Linux kernel, u-boot, etc.) to configure the minimal fields that + * Linux kernel, u-boot, etc.) to configure the minimal fields that * are required to use simple executive files directly. * * Locking (if required) must be handled outside of this * function * * @phy_mem_desc_ptr: - * Pointer to global physical memory descriptor - * (bootmem descriptor) @board_type: Octeon board - * type enumeration + * Pointer to global physical memory descriptor + * (bootmem descriptor) @board_type: Octeon board + * type enumeration * * @board_rev_major: - * Board major revision + * Board major revision * @board_rev_minor: - * Board minor revision + * Board minor revision * @cpu_clock_hz: - * CPU clock freqency in hertz + * CPU clock freqency in hertz * * Returns 0: Failure - * 1: success + * 1: success */ int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr, uint16_t board_type, |