aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/kernel/cpu-probe.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/kernel/cpu-probe.c')
-rw-r--r--arch/mips/kernel/cpu-probe.c198
1 files changed, 0 insertions, 198 deletions
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 4bbffdb9024..c6568bf4b1b 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -27,105 +27,6 @@
#include <asm/spram.h>
#include <asm/uaccess.h>
-/*
- * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
- * the implementation of the "wait" feature differs between CPU families. This
- * points to the function that implements CPU specific wait.
- * The wait instruction stops the pipeline and reduces the power consumption of
- * the CPU very much.
- */
-void (*cpu_wait)(void);
-EXPORT_SYMBOL(cpu_wait);
-
-static void r3081_wait(void)
-{
- unsigned long cfg = read_c0_conf();
- write_c0_conf(cfg | R30XX_CONF_HALT);
-}
-
-static void r39xx_wait(void)
-{
- local_irq_disable();
- if (!need_resched())
- write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
- local_irq_enable();
-}
-
-extern void r4k_wait(void);
-
-/*
- * This variant is preferable as it allows testing need_resched and going to
- * sleep depending on the outcome atomically. Unfortunately the "It is
- * implementation-dependent whether the pipeline restarts when a non-enabled
- * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
- * using this version a gamble.
- */
-void r4k_wait_irqoff(void)
-{
- local_irq_disable();
- if (!need_resched())
- __asm__(" .set push \n"
- " .set mips3 \n"
- " wait \n"
- " .set pop \n");
- local_irq_enable();
- __asm__(" .globl __pastwait \n"
- "__pastwait: \n");
-}
-
-/*
- * The RM7000 variant has to handle erratum 38. The workaround is to not
- * have any pending stores when the WAIT instruction is executed.
- */
-static void rm7k_wait_irqoff(void)
-{
- local_irq_disable();
- if (!need_resched())
- __asm__(
- " .set push \n"
- " .set mips3 \n"
- " .set noat \n"
- " mfc0 $1, $12 \n"
- " sync \n"
- " mtc0 $1, $12 # stalls until W stage \n"
- " wait \n"
- " mtc0 $1, $12 # stalls until W stage \n"
- " .set pop \n");
- local_irq_enable();
-}
-
-/*
- * The Au1xxx wait is available only if using 32khz counter or
- * external timer source, but specifically not CP0 Counter.
- * alchemy/common/time.c may override cpu_wait!
- */
-static void au1k_wait(void)
-{
- __asm__(" .set mips3 \n"
- " cache 0x14, 0(%0) \n"
- " cache 0x14, 32(%0) \n"
- " sync \n"
- " nop \n"
- " wait \n"
- " nop \n"
- " nop \n"
- " nop \n"
- " nop \n"
- " .set mips0 \n"
- : : "r" (au1k_wait));
-}
-
-static int __initdata nowait;
-
-static int __init wait_disable(char *s)
-{
- nowait = 1;
-
- return 1;
-}
-
-__setup("nowait", wait_disable);
-
static int __cpuinitdata mips_fpu_disabled;
static int __init fpu_disable(char *s)
@@ -150,105 +51,6 @@ static int __init dsp_disable(char *s)
__setup("nodsp", dsp_disable);
-void __init check_wait(void)
-{
- struct cpuinfo_mips *c = &current_cpu_data;
-
- if (nowait) {
- printk("Wait instruction disabled.\n");
- return;
- }
-
- switch (c->cputype) {
- case CPU_R3081:
- case CPU_R3081E:
- cpu_wait = r3081_wait;
- break;
- case CPU_TX3927:
- cpu_wait = r39xx_wait;
- break;
- case CPU_R4200:
-/* case CPU_R4300: */
- case CPU_R4600:
- case CPU_R4640:
- case CPU_R4650:
- case CPU_R4700:
- case CPU_R5000:
- case CPU_R5500:
- case CPU_NEVADA:
- case CPU_4KC:
- case CPU_4KEC:
- case CPU_4KSC:
- case CPU_5KC:
- case CPU_25KF:
- case CPU_PR4450:
- case CPU_BMIPS3300:
- case CPU_BMIPS4350:
- case CPU_BMIPS4380:
- case CPU_BMIPS5000:
- case CPU_CAVIUM_OCTEON:
- case CPU_CAVIUM_OCTEON_PLUS:
- case CPU_CAVIUM_OCTEON2:
- case CPU_JZRISC:
- case CPU_LOONGSON1:
- case CPU_XLR:
- case CPU_XLP:
- cpu_wait = r4k_wait;
- break;
-
- case CPU_RM7000:
- cpu_wait = rm7k_wait_irqoff;
- break;
-
- case CPU_M14KC:
- case CPU_M14KEC:
- case CPU_24K:
- case CPU_34K:
- case CPU_1004K:
- cpu_wait = r4k_wait;
- if (read_c0_config7() & MIPS_CONF7_WII)
- cpu_wait = r4k_wait_irqoff;
- break;
-
- case CPU_74K:
- cpu_wait = r4k_wait;
- if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
- cpu_wait = r4k_wait_irqoff;
- break;
-
- case CPU_TX49XX:
- cpu_wait = r4k_wait_irqoff;
- break;
- case CPU_ALCHEMY:
- cpu_wait = au1k_wait;
- break;
- case CPU_20KC:
- /*
- * WAIT on Rev1.0 has E1, E2, E3 and E16.
- * WAIT on Rev2.0 and Rev3.0 has E16.
- * Rev3.1 WAIT is nop, why bother
- */
- if ((c->processor_id & 0xff) <= 0x64)
- break;
-
- /*
- * Another rev is incremeting c0_count at a reduced clock
- * rate while in WAIT mode. So we basically have the choice
- * between using the cp0 timer as clocksource or avoiding
- * the WAIT instruction. Until more details are known,
- * disable the use of WAIT for 20Kc entirely.
- cpu_wait = r4k_wait;
- */
- break;
- case CPU_RM9000:
- if ((c->processor_id & 0x00ff) >= 0x40)
- cpu_wait = r4k_wait;
- break;
- default:
- break;
- }
-}
-
static inline void check_errata(void)
{
struct cpuinfo_mips *c = &current_cpu_data;