aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/loongson
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/loongson')
-rw-r--r--arch/mips/loongson/Kconfig108
-rw-r--r--arch/mips/loongson/Makefile6
-rw-r--r--arch/mips/loongson/common/Makefile18
-rw-r--r--arch/mips/loongson/common/bonito-irq.c13
-rw-r--r--arch/mips/loongson/common/cmdline.c4
-rw-r--r--arch/mips/loongson/common/cs5536/Makefile13
-rw-r--r--arch/mips/loongson/common/cs5536/cs5536_acc.c140
-rw-r--r--arch/mips/loongson/common/cs5536/cs5536_ehci.c158
-rw-r--r--arch/mips/loongson/common/cs5536/cs5536_ide.c179
-rw-r--r--arch/mips/loongson/common/cs5536/cs5536_isa.c316
-rw-r--r--arch/mips/loongson/common/cs5536/cs5536_mfgpt.c217
-rw-r--r--arch/mips/loongson/common/cs5536/cs5536_ohci.c147
-rw-r--r--arch/mips/loongson/common/cs5536/cs5536_pci.c87
-rw-r--r--arch/mips/loongson/common/early_printk.c17
-rw-r--r--arch/mips/loongson/common/env.c3
-rw-r--r--arch/mips/loongson/common/init.c19
-rw-r--r--arch/mips/loongson/common/irq.c12
-rw-r--r--arch/mips/loongson/common/machtype.c25
-rw-r--r--arch/mips/loongson/common/mem.c91
-rw-r--r--arch/mips/loongson/common/pci.c20
-rw-r--r--arch/mips/loongson/common/platform.c30
-rw-r--r--arch/mips/loongson/common/pm.c161
-rw-r--r--arch/mips/loongson/common/reset.c2
-rw-r--r--arch/mips/loongson/common/serial.c76
-rw-r--r--arch/mips/loongson/common/time.c3
-rw-r--r--arch/mips/loongson/common/uart_base.c45
-rw-r--r--arch/mips/loongson/fuloong-2e/irq.c4
-rw-r--r--arch/mips/loongson/fuloong-2e/reset.c4
-rw-r--r--arch/mips/loongson/lemote-2f/Makefile11
-rw-r--r--arch/mips/loongson/lemote-2f/ec_kb3310b.c130
-rw-r--r--arch/mips/loongson/lemote-2f/ec_kb3310b.h188
-rw-r--r--arch/mips/loongson/lemote-2f/irq.c134
-rw-r--r--arch/mips/loongson/lemote-2f/pm.c149
-rw-r--r--arch/mips/loongson/lemote-2f/reset.c159
34 files changed, 2613 insertions, 76 deletions
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index d45092505fa..3df1967dea0 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -1,31 +1,85 @@
choice
- prompt "Machine Type"
- depends on MACH_LOONGSON
+ prompt "Machine Type"
+ depends on MACH_LOONGSON
config LEMOTE_FULOONG2E
- bool "Lemote Fuloong(2e) mini-PC"
- select ARCH_SPARSEMEM_ENABLE
- select CEVT_R4K
- select CSRC_R4K
- select SYS_HAS_CPU_LOONGSON2E
- select DMA_NONCOHERENT
- select BOOT_ELF32
- select BOARD_SCACHE
- select HW_HAS_PCI
- select I8259
- select ISA
- select IRQ_CPU
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
- select SYS_HAS_EARLY_PRINTK
- select GENERIC_HARDIRQS_NO__DO_IRQ
- select GENERIC_ISA_DMA_SUPPORT_BROKEN
- select CPU_HAS_WB
- help
- Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
- an FPGA northbridge
-
- Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
+ bool "Lemote Fuloong(2e) mini-PC"
+ select ARCH_SPARSEMEM_ENABLE
+ select CEVT_R4K
+ select CSRC_R4K
+ select SYS_HAS_CPU_LOONGSON2E
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select BOARD_SCACHE
+ select HW_HAS_PCI
+ select I8259
+ select ISA
+ select IRQ_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_HAS_EARLY_PRINTK
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select CPU_HAS_WB
+ help
+ Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
+ an FPGA northbridge
+
+ Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
+
+config LEMOTE_MACH2F
+ bool "Lemote Loongson 2F family machines"
+ select ARCH_SPARSEMEM_ENABLE
+ select BOARD_SCACHE
+ select BOOT_ELF32
+ select CEVT_R4K if ! MIPS_EXTERNAL_TIMER
+ select CPU_HAS_WB
+ select CS5536
+ select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
+ select DMA_NONCOHERENT
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select HW_HAS_PCI
+ select I8259
+ select IRQ_CPU
+ select ISA
+ select SYS_HAS_CPU_LOONGSON2F
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ Lemote Loongson 2F family machines utilize the 2F revision of
+ Loongson processor and the AMD CS5536 south bridge.
+
+ These family machines include fuloong2f mini PC, yeeloong2f notebook,
+ LingLoong allinone PC and so forth.
endchoice
+
+config CS5536
+ bool
+
+config CS5536_MFGPT
+ bool "CS5536 MFGPT Timer"
+ depends on CS5536
+ select MIPS_EXTERNAL_TIMER
+ help
+ This option enables the mfgpt0 timer of AMD CS5536.
+
+ If you want to enable the Loongson2 CPUFreq Driver, Please enable
+ this option at first, otherwise, You will get wrong system time.
+
+ If unsure, say Yes.
+
+config LOONGSON_SUSPEND
+ bool
+ default y
+ depends on CPU_SUPPORTS_CPUFREQ && SUSPEND
+
+config LOONGSON_UART_BASE
+ bool
+ default y
+ depends on EARLY_PRINTK || SERIAL_8250
diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile
index 39048c455d7..2b76cb0fb07 100644
--- a/arch/mips/loongson/Makefile
+++ b/arch/mips/loongson/Makefile
@@ -9,3 +9,9 @@ obj-$(CONFIG_MACH_LOONGSON) += common/
#
obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/
+
+#
+# Lemote loongson2f family machines
+#
+
+obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index 656b3cc0a2a..7668c4de115 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -3,9 +3,23 @@
#
obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
- pci.o bonito-irq.o mem.o machtype.o
+ pci.o bonito-irq.o mem.o machtype.o platform.o
#
-# Early printk support
+# Serial port support
#
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_SERIAL_8250) += serial.o
+obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
+
+#
+# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
+# space
+#
+obj-$(CONFIG_CS5536) += cs5536/
+
+#
+# Suspend Support
+#
+
+obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
diff --git a/arch/mips/loongson/common/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c
index 3e31e7ad713..2dc2a4cc632 100644
--- a/arch/mips/loongson/common/bonito-irq.c
+++ b/arch/mips/loongson/common/bonito-irq.c
@@ -12,18 +12,19 @@
* option) any later version.
*/
#include <linux/interrupt.h>
+#include <linux/compiler.h>
#include <loongson.h>
static inline void bonito_irq_enable(unsigned int irq)
{
- BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE));
+ LOONGSON_INTENSET = (1 << (irq - LOONGSON_IRQ_BASE));
mmiowb();
}
static inline void bonito_irq_disable(unsigned int irq)
{
- BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE));
+ LOONGSON_INTENCLR = (1 << (irq - LOONGSON_IRQ_BASE));
mmiowb();
}
@@ -35,7 +36,7 @@ static struct irq_chip bonito_irq_type = {
.unmask = bonito_irq_enable,
};
-static struct irqaction dma_timeout_irqaction = {
+static struct irqaction __maybe_unused dma_timeout_irqaction = {
.handler = no_action,
.name = "dma_timeout",
};
@@ -44,8 +45,10 @@ void bonito_irq_init(void)
{
u32 i;
- for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++)
+ for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++)
set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
- setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction);
+#ifdef CONFIG_CPU_LOONGSON2E
+ setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction);
+#endif
}
diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson/common/cmdline.c
index 75f1b243ee4..7ad47f22747 100644
--- a/arch/mips/loongson/common/cmdline.c
+++ b/arch/mips/loongson/common/cmdline.c
@@ -9,7 +9,7 @@
* Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
* Author: Fuxin Zhang, zhangfx@lemote.com
*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2009 Lemote Inc.
* Author: Wu Zhangjin, wuzj@lemote.com
*
* This program is free software; you can redistribute it and/or modify it
@@ -49,4 +49,6 @@ void __init prom_init_cmdline(void)
strcat(arcs_cmdline, " console=ttyS0,115200");
if ((strstr(arcs_cmdline, "root=")) == NULL)
strcat(arcs_cmdline, " root=/dev/hda1");
+
+ prom_init_machtype();
}
diff --git a/arch/mips/loongson/common/cs5536/Makefile b/arch/mips/loongson/common/cs5536/Makefile
new file mode 100644
index 00000000000..510d4cdc237
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for CS5536 support.
+#
+
+obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \
+ cs5536_isa.o cs5536_ehci.o
+
+#
+# Enable cs5536 mfgpt Timer
+#
+obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/loongson/common/cs5536/cs5536_acc.c b/arch/mips/loongson/common/cs5536/cs5536_acc.c
new file mode 100644
index 00000000000..b49485f187e
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_acc.c
@@ -0,0 +1,140 @@
+/*
+ * the ACC Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_acc_write_reg(int reg, u32 value)
+{
+ u32 hi = 0, lo = value;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+ if (value & PCI_COMMAND_MASTER)
+ lo |= (0x03 << 8);
+ else
+ lo &= ~(0x03 << 8);
+ _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
+ break;
+ case PCI_STATUS:
+ if (value & PCI_STATUS_PARITY) {
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG) {
+ lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ }
+ }
+ break;
+ case PCI_BAR0_REG:
+ if (value == PCI_BAR_RANGE_MASK) {
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ lo |= SOFT_BAR_ACC_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else if (value & 0x01) {
+ value &= 0xfffffffc;
+ hi = 0xA0000000 | ((value & 0x000ff000) >> 12);
+ lo = 0x000fff80 | ((value & 0x00000fff) << 20);
+ _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo);
+ }
+ break;
+ case PCI_ACC_INT_REG:
+ _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+ /* disable all the usb interrupt in PIC */
+ lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT);
+ if (value) /* enable all the acc interrupt in PIC */
+ lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT);
+ _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
+ break;
+ default:
+ break;
+ }
+}
+
+u32 pci_acc_read_reg(int reg)
+{
+ u32 hi, lo;
+ u32 conf_data = 0;
+
+ switch (reg) {
+ case PCI_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID);
+ break;
+ case PCI_COMMAND:
+ _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
+ if (((lo & 0xfff00000) || (hi & 0x000000ff))
+ && ((hi & 0xf0000000) == 0xa0000000))
+ conf_data |= PCI_COMMAND_IO;
+ _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+ if ((lo & 0x300) == 0x300)
+ conf_data |= PCI_COMMAND_MASTER;
+ break;
+ case PCI_STATUS:
+ conf_data |= PCI_STATUS_66MHZ;
+ conf_data |= PCI_STATUS_FAST_BACK;
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG)
+ conf_data |= PCI_STATUS_PARITY;
+ conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+ break;
+ case PCI_CLASS_REVISION:
+ _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo);
+ conf_data = lo & 0x000000ff;
+ conf_data |= (CS5536_ACC_CLASS_CODE << 8);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ conf_data =
+ CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+ PCI_NORMAL_LATENCY_TIMER);
+ break;
+ case PCI_BAR0_REG:
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ if (lo & SOFT_BAR_ACC_FLAG) {
+ conf_data = CS5536_ACC_RANGE |
+ PCI_BASE_ADDRESS_SPACE_IO;
+ lo &= ~SOFT_BAR_ACC_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else {
+ _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
+ conf_data = (hi & 0x000000ff) << 12;
+ conf_data |= (lo & 0xfff00000) >> 20;
+ conf_data |= 0x01;
+ conf_data &= ~0x02;
+ }
+ break;
+ case PCI_CARDBUS_CIS:
+ conf_data = PCI_CARDBUS_CIS_POINTER;
+ break;
+ case PCI_SUBSYSTEM_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID);
+ break;
+ case PCI_ROM_ADDRESS:
+ conf_data = PCI_EXPANSION_ROM_BAR;
+ break;
+ case PCI_CAPABILITY_LIST:
+ conf_data = PCI_CAPLIST_USB_POINTER;
+ break;
+ case PCI_INTERRUPT_LINE:
+ conf_data =
+ CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR);
+ break;
+ default:
+ break;
+ }
+
+ return conf_data;
+}
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
new file mode 100644
index 00000000000..74f9c59d36a
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c
@@ -0,0 +1,158 @@
+/*
+ * the EHCI Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_ehci_write_reg(int reg, u32 value)
+{
+ u32 hi = 0, lo = value;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ if (value & PCI_COMMAND_MASTER)
+ hi |= PCI_COMMAND_MASTER;
+ else
+ hi &= ~PCI_COMMAND_MASTER;
+
+ if (value & PCI_COMMAND_MEMORY)
+ hi |= PCI_COMMAND_MEMORY;
+ else
+ hi &= ~PCI_COMMAND_MEMORY;
+ _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+ break;
+ case PCI_STATUS:
+ if (value & PCI_STATUS_PARITY) {
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG) {
+ lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ }
+ }
+ break;
+ case PCI_BAR0_REG:
+ if (value == PCI_BAR_RANGE_MASK) {
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ lo |= SOFT_BAR_EHCI_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else if ((value & 0x01) == 0x00) {
+ _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+
+ value &= 0xfffffff0;
+ hi = 0x40000000 | ((value & 0xff000000) >> 24);
+ lo = 0x000fffff | ((value & 0x00fff000) << 8);
+ _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo);
+ }
+ break;
+ case PCI_EHCI_LEGSMIEN_REG:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ hi &= 0x003f0000;
+ hi |= (value & 0x3f) << 16;
+ _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+ break;
+ case PCI_EHCI_FLADJ_REG:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ hi &= ~0x00003f00;
+ hi |= value & 0x00003f00;
+ _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
+ break;
+ default:
+ break;
+ }
+}
+
+u32 pci_ehci_read_reg(int reg)
+{
+ u32 conf_data = 0;
+ u32 hi, lo;
+
+ switch (reg) {
+ case PCI_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID);
+ break;
+ case PCI_COMMAND:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ if (hi & PCI_COMMAND_MASTER)
+ conf_data |= PCI_COMMAND_MASTER;
+ if (hi & PCI_COMMAND_MEMORY)
+ conf_data |= PCI_COMMAND_MEMORY;
+ break;
+ case PCI_STATUS:
+ conf_data |= PCI_STATUS_66MHZ;
+ conf_data |= PCI_STATUS_FAST_BACK;
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG)
+ conf_data |= PCI_STATUS_PARITY;
+ conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+ break;
+ case PCI_CLASS_REVISION:
+ _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
+ conf_data = lo & 0x000000ff;
+ conf_data |= (CS5536_EHCI_CLASS_CODE << 8);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ conf_data =
+ CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+ PCI_NORMAL_LATENCY_TIMER);
+ break;
+ case PCI_BAR0_REG:
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ if (lo & SOFT_BAR_EHCI_FLAG) {
+ conf_data = CS5536_EHCI_RANGE |
+ PCI_BASE_ADDRESS_SPACE_MEMORY;
+ lo &= ~SOFT_BAR_EHCI_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else {
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ conf_data = lo & 0xfffff000;
+ }
+ break;
+ case PCI_CARDBUS_CIS:
+ conf_data = PCI_CARDBUS_CIS_POINTER;
+ break;
+ case PCI_SUBSYSTEM_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
+ break;
+ case PCI_ROM_ADDRESS:
+ conf_data = PCI_EXPANSION_ROM_BAR;
+ break;
+ case PCI_CAPABILITY_LIST:
+ conf_data = PCI_CAPLIST_USB_POINTER;
+ break;
+ case PCI_INTERRUPT_LINE:
+ conf_data =
+ CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
+ break;
+ case PCI_EHCI_LEGSMIEN_REG:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ conf_data = (hi & 0x003f0000) >> 16;
+ break;
+ case PCI_EHCI_LEGSMISTS_REG:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ conf_data = (hi & 0x3f000000) >> 24;
+ break;
+ case PCI_EHCI_FLADJ_REG:
+ _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+ conf_data = hi & 0x00003f00;
+ break;
+ default:
+ break;
+ }
+
+ return conf_data;
+}
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c
new file mode 100644
index 00000000000..3f61594b388
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c
@@ -0,0 +1,179 @@
+/*
+ * the IDE Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_ide_write_reg(int reg, u32 value)
+{
+ u32 hi = 0, lo = value;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+ if (value & PCI_COMMAND_MASTER)
+ lo |= (0x03 << 4);
+ else
+ lo &= ~(0x03 << 4);
+ _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
+ break;
+ case PCI_STATUS:
+ if (value & PCI_STATUS_PARITY) {
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG) {
+ lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ }
+ }
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ value &= 0x0000ff00;
+ _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+ hi &= 0xffffff00;
+ hi |= (value >> 8);
+ _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
+ break;
+ case PCI_BAR4_REG:
+ if (value == PCI_BAR_RANGE_MASK) {
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ lo |= SOFT_BAR_IDE_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else if (value & 0x01) {
+ lo = (value & 0xfffffff0) | 0x1;
+ _wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
+
+ value &= 0xfffffffc;
+ hi = 0x60000000 | ((value & 0x000ff000) >> 12);
+ lo = 0x000ffff0 | ((value & 0x00000fff) << 20);
+ _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo);
+ }
+ break;
+ case PCI_IDE_CFG_REG:
+ if (value == CS5536_IDE_FLASH_SIGNATURE) {
+ _rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
+ lo |= 0x01;
+ _wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
+ } else
+ _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
+ break;
+ case PCI_IDE_DTC_REG:
+ _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
+ break;
+ case PCI_IDE_CAST_REG:
+ _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
+ break;
+ case PCI_IDE_ETC_REG:
+ _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
+ break;
+ case PCI_IDE_PM_REG:
+ _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
+ break;
+ default:
+ break;
+ }
+}
+
+u32 pci_ide_read_reg(int reg)
+{
+ u32 conf_data = 0;
+ u32 hi, lo;
+
+ switch (reg) {
+ case PCI_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID);
+ break;
+ case PCI_COMMAND:
+ _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
+ if (lo & 0xfffffff0)
+ conf_data |= PCI_COMMAND_IO;
+ _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
+ if ((lo & 0x30) == 0x30)
+ conf_data |= PCI_COMMAND_MASTER;
+ break;
+ case PCI_STATUS:
+ conf_data |= PCI_STATUS_66MHZ;
+ conf_data |= PCI_STATUS_FAST_BACK;
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG)
+ conf_data |= PCI_STATUS_PARITY;
+ conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+ break;
+ case PCI_CLASS_REVISION:
+ _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo);
+ conf_data = lo & 0x000000ff;
+ conf_data |= (CS5536_IDE_CLASS_CODE << 8);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+ hi &= 0x000000f8;
+ conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi);
+ break;
+ case PCI_BAR4_REG:
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ if (lo & SOFT_BAR_IDE_FLAG) {
+ conf_data = CS5536_IDE_RANGE |
+ PCI_BASE_ADDRESS_SPACE_IO;
+ lo &= ~SOFT_BAR_IDE_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else {
+ _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
+ conf_data = lo & 0xfffffff0;
+ conf_data |= 0x01;
+ conf_data &= ~0x02;
+ }
+ break;
+ case PCI_CARDBUS_CIS:
+ conf_data = PCI_CARDBUS_CIS_POINTER;
+ break;
+ case PCI_SUBSYSTEM_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID);
+ break;
+ case PCI_ROM_ADDRESS:
+ conf_data = PCI_EXPANSION_ROM_BAR;
+ break;
+ case PCI_CAPABILITY_LIST:
+ conf_data = PCI_CAPLIST_POINTER;
+ break;
+ case PCI_INTERRUPT_LINE:
+ conf_data =
+ CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR);
+ break;
+ case PCI_IDE_CFG_REG:
+ _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
+ conf_data = lo;
+ break;
+ case PCI_IDE_DTC_REG:
+ _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
+ conf_data = lo;
+ break;
+ case PCI_IDE_CAST_REG:
+ _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
+ conf_data = lo;
+ break;
+ case PCI_IDE_ETC_REG:
+ _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
+ conf_data = lo;
+ case PCI_IDE_PM_REG:
+ _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
+ conf_data = lo;
+ break;
+ default:
+ break;
+ }
+
+ return conf_data;
+}
diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c
new file mode 100644
index 00000000000..b6f17f538e4
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c
@@ -0,0 +1,316 @@
+/*
+ * the ISA Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+/* common variables for PCI_ISA_READ/WRITE_BAR */
+static const u32 divil_msr_reg[6] = {
+ DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO),
+ DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ),
+ DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI),
+};
+
+static const u32 soft_bar_flag[6] = {
+ SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG,
+ SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG,
+};
+
+static const u32 sb_msr_reg[6] = {
+ SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2),
+ SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5),
+};
+
+static const u32 bar_space_range[6] = {
+ CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE,
+ CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE,
+};
+
+static const int bar_space_len[6] = {
+ CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH,
+ CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH,
+};
+
+/*
+ * enable the divil module bar space.
+ *
+ * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg
+ * and the RCONFx(0~5) reg to use the modules.
+ */
+static void divil_lbar_enable(void)
+{
+ u32 hi, lo;
+ int offset;
+
+ /*
+ * The DIVIL IRQ is not used yet. and make the RCONF0 reserved.
+ */
+
+ for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
+ _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
+ hi |= 0x01;
+ _wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+ }
+}
+
+/*
+ * disable the divil module bar space.
+ */
+static void divil_lbar_disable(void)
+{
+ u32 hi, lo;
+ int offset;
+
+ for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
+ _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
+ hi &= ~0x01;
+ _wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+ }
+}
+
+/*
+ * BAR write: write value to the n BAR
+ */
+
+void pci_isa_write_bar(int n, u32 value)
+{
+ u32 hi = 0, lo = value;
+
+ if (value == PCI_BAR_RANGE_MASK) {
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ lo |= soft_bar_flag[n];
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else if (value & 0x01) {
+ /* NATIVE reg */
+ hi = 0x0000f001;
+ lo &= bar_space_range[n];
+ _wrmsr(divil_msr_reg[n], hi, lo);
+
+ /* RCONFx is 4bytes in units for I/O space */
+ hi = ((value & 0x000ffffc) << 12) |
+ ((bar_space_len[n] - 4) << 12) | 0x01;
+ lo = ((value & 0x000ffffc) << 12) | 0x01;
+ _wrmsr(sb_msr_reg[n], hi, lo);
+ }
+}
+
+/*
+ * BAR read: read the n BAR
+ */
+
+u32 pci_isa_read_bar(int n)
+{
+ u32 conf_data = 0;
+ u32 hi, lo;
+
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ if (lo & soft_bar_flag[n]) {
+ conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO;
+ lo &= ~soft_bar_flag[n];
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else {
+ _rdmsr(divil_msr_reg[n], &hi, &lo);
+ conf_data = lo & bar_space_range[n];
+ conf_data |= 0x01;
+ conf_data &= ~0x02;
+ }
+ return conf_data;
+}
+
+/*
+ * isa_write: ISA write transfer
+ *
+ * We assume that this is not a bus master transfer.
+ */
+void pci_isa_write_reg(int reg, u32 value)
+{
+ u32 hi = 0, lo = value;
+ u32 temp;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ if (value & PCI_COMMAND_IO)
+ divil_lbar_enable();
+ else
+ divil_lbar_disable();
+ break;
+ case PCI_STATUS:
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ temp = lo & 0x0000ffff;
+ if ((value & PCI_STATUS_SIG_TARGET_ABORT) &&
+ (lo & SB_TAS_ERR_EN))
+ temp |= SB_TAS_ERR_FLAG;
+
+ if ((value & PCI_STATUS_REC_TARGET_ABORT) &&
+ (lo & SB_TAR_ERR_EN))
+ temp |= SB_TAR_ERR_FLAG;
+
+ if ((value & PCI_STATUS_REC_MASTER_ABORT)
+ && (lo & SB_MAR_ERR_EN))
+ temp |= SB_MAR_ERR_FLAG;
+
+ if ((value & PCI_STATUS_DETECTED_PARITY)
+ && (lo & SB_PARE_ERR_EN))
+ temp |= SB_PARE_ERR_FLAG;
+
+ lo = temp;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ value &= 0x0000ff00;
+ _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+ hi &= 0xffffff00;
+ hi |= (value >> 8);
+ _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
+ break;
+ case PCI_BAR0_REG:
+ pci_isa_write_bar(0, value);
+ break;
+ case PCI_BAR1_REG:
+ pci_isa_write_bar(1, value);
+ break;
+ case PCI_BAR2_REG:
+ pci_isa_write_bar(2, value);
+ break;
+ case PCI_BAR3_REG:
+ pci_isa_write_bar(3, value);
+ break;
+ case PCI_BAR4_REG:
+ pci_isa_write_bar(4, value);
+ break;
+ case PCI_BAR5_REG:
+ pci_isa_write_bar(5, value);
+ break;
+ case PCI_UART1_INT_REG:
+ _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
+ /* disable uart1 interrupt in PIC */
+ lo &= ~(0xf << 24);
+ if (value) /* enable uart1 interrupt in PIC */
+ lo |= (CS5536_UART1_INTR << 24);
+ _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
+ break;
+ case PCI_UART2_INT_REG:
+ _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
+ /* disable uart2 interrupt in PIC */
+ lo &= ~(0xf << 28);
+ if (value) /* enable uart2 interrupt in PIC */
+ lo |= (CS5536_UART2_INTR << 28);
+ _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
+ break;
+ case PCI_ISA_FIXUP_REG:
+ if (value) {
+ /* enable the TARGET ABORT/MASTER ABORT etc. */
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ lo |= 0x00000063;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ }
+
+ default:
+ /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */
+ break;
+ }
+}
+
+/*
+ * isa_read: ISA read transfers
+ *
+ * We assume that this is not a bus master transfer.
+ */
+u32 pci_isa_read_reg(int reg)
+{
+ u32 conf_data = 0;
+ u32 hi, lo;
+
+ switch (reg) {
+ case PCI_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID);
+ break;
+ case PCI_COMMAND:
+ /* we just check the first LBAR for the IO enable bit, */
+ /* maybe we should changed later. */
+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo);
+ if (hi & 0x01)
+ conf_data |= PCI_COMMAND_IO;
+ break;
+ case PCI_STATUS:
+ conf_data |= PCI_STATUS_66MHZ;
+ conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+ conf_data |= PCI_STATUS_FAST_BACK;
+
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_TAS_ERR_FLAG)
+ conf_data |= PCI_STATUS_SIG_TARGET_ABORT;
+ if (lo & SB_TAR_ERR_FLAG)
+ conf_data |= PCI_STATUS_REC_TARGET_ABORT;
+ if (lo & SB_MAR_ERR_FLAG)
+ conf_data |= PCI_STATUS_REC_MASTER_ABORT;
+ if (lo & SB_PARE_ERR_FLAG)
+ conf_data |= PCI_STATUS_DETECTED_PARITY;
+ break;
+ case PCI_CLASS_REVISION:
+ _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo);
+ conf_data = lo & 0x000000ff;
+ conf_data |= (CS5536_ISA_CLASS_CODE << 8);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
+ hi &= 0x000000f8;
+ conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi);
+ break;
+ /*
+ * we only use the LBAR of DIVIL, no RCONF used.
+ * all of them are IO space.
+ */
+ case PCI_BAR0_REG:
+ return pci_isa_read_bar(0);
+ break;
+ case PCI_BAR1_REG:
+ return pci_isa_read_bar(1);
+ break;
+ case PCI_BAR2_REG:
+ return pci_isa_read_bar(2);
+ break;
+ case PCI_BAR3_REG:
+ break;
+ case PCI_BAR4_REG:
+ return pci_isa_read_bar(4);
+ break;
+ case PCI_BAR5_REG:
+ return pci_isa_read_bar(5);
+ break;
+ case PCI_CARDBUS_CIS:
+ conf_data = PCI_CARDBUS_CIS_POINTER;
+ break;
+ case PCI_SUBSYSTEM_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID);
+ break;
+ case PCI_ROM_ADDRESS:
+ conf_data = PCI_EXPANSION_ROM_BAR;
+ break;
+ case PCI_CAPABILITY_LIST:
+ conf_data = PCI_CAPLIST_POINTER;
+ break;
+ case PCI_INTERRUPT_LINE:
+ /* no interrupt used here */
+ conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00);
+ break;
+ default:
+ break;
+ }
+
+ return conf_data;
+}
diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
new file mode 100644
index 00000000000..6cb44dbaeec
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
@@ -0,0 +1,217 @@
+/*
+ * CS5536 General timer functions
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua, yanh@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu zhangjin, wuzj@lemote.com
+ *
+ * Reference: AMD Geode(TM) CS5536 Companion Device Data Book
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+
+#include <asm/time.h>
+
+#include <cs5536/cs5536_mfgpt.h>
+
+DEFINE_SPINLOCK(mfgpt_lock);
+EXPORT_SYMBOL(mfgpt_lock);
+
+static u32 mfgpt_base;
+
+/*
+ * Initialize the MFGPT timer.
+ *
+ * This is also called after resume to bring the MFGPT into operation again.
+ */
+
+/* disable counter */
+void disable_mfgpt0_counter(void)
+{
+ outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP);
+}
+EXPORT_SYMBOL(disable_mfgpt0_counter);
+
+/* enable counter, comparator2 to event mode, 14.318MHz clock */
+void enable_mfgpt0_counter(void)
+{
+ outw(0xe310, MFGPT0_SETUP);
+}
+EXPORT_SYMBOL(enable_mfgpt0_counter);
+
+static void init_mfgpt_timer(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ spin_lock(&mfgpt_lock);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */
+ outw(0, MFGPT0_CNT); /* set counter to 0 */
+ enable_mfgpt0_counter();
+ break;
+
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
+ evt->mode == CLOCK_EVT_MODE_ONESHOT)
+ disable_mfgpt0_counter();
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* The oneshot mode have very high deviation, Not use it! */
+ break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ /* Nothing to do here */
+ break;
+ }
+ spin_unlock(&mfgpt_lock);
+}
+
+static struct clock_event_device mfgpt_clockevent = {
+ .name = "mfgpt",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .set_mode = init_mfgpt_timer,
+ .irq = CS5536_MFGPT_INTR,
+};
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ u32 basehi;
+
+ /*
+ * get MFGPT base address
+ *
+ * NOTE: do not remove me, it's need for the value of mfgpt_base is
+ * variable
+ */
+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
+
+ /* ack */
+ outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP);
+
+ mfgpt_clockevent.event_handler(&mfgpt_clockevent);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq5 = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
+ .name = "timer"
+};
+
+/*
+ * Initialize the conversion factor and the min/max deltas of the clock event
+ * structure and register the clock event source with the framework.
+ */
+void __init setup_mfgpt0_timer(void)
+{
+ u32 basehi;
+ struct clock_event_device *cd = &mfgpt_clockevent;
+ unsigned int cpu = smp_processor_id();
+
+ cd->cpumask = cpumask_of(cpu);
+ clockevent_set_clock(cd, MFGPT_TICK_RATE);
+ cd->max_delta_ns = clockevent_delta2ns(0xffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(0xf, cd);
+
+ /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */
+ _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100);
+
+ /* Enable Interrupt Gate 5 */
+ _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000);
+
+ /* get MFGPT base address */
+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
+
+ clockevents_register_device(cd);
+
+ setup_irq(CS5536_MFGPT_INTR, &irq5);
+}
+
+/*
+ * Since the MFGPT overflows every tick, its not very useful
+ * to just read by itself. So use jiffies to emulate a free
+ * running counter:
+ */
+static cycle_t mfgpt_read(struct clocksource *cs)
+{
+ unsigned long flags;
+ int count;
+ u32 jifs;
+ static int old_count;
+ static u32 old_jifs;
+
+ spin_lock_irqsave(&mfgpt_lock, flags);
+ /*
+ * Although our caller may have the read side of xtime_lock,
+ * this is now a seqlock, and we are cheating in this routine
+ * by having side effects on state that we cannot undo if
+ * there is a collision on the seqlock and our caller has to
+ * retry. (Namely, old_jifs and old_count.) So we must treat
+ * jiffies as volatile despite the lock. We read jiffies
+ * before latching the timer count to guarantee that although
+ * the jiffies value might be older than the count (that is,
+ * the counter may underflow between the last point where
+ * jiffies was incremented and the point where we latch the
+ * count), it cannot be newer.
+ */
+ jifs = jiffies;
+ /* read the count */
+ count = inw(MFGPT0_CNT);
+
+ /*
+ * It's possible for count to appear to go the wrong way for this
+ * reason:
+ *
+ * The timer counter underflows, but we haven't handled the resulting
+ * interrupt and incremented jiffies yet.
+ *
+ * Previous attempts to handle these cases intelligently were buggy, so
+ * we just do the simple thing now.
+ */
+ if (count < old_count && jifs == old_jifs)
+ count = old_count;
+
+ old_count = count;
+ old_jifs = jifs;
+
+ spin_unlock_irqrestore(&mfgpt_lock, flags);
+
+ return (cycle_t) (jifs * COMPARE) + count;
+}
+
+static struct clocksource clocksource_mfgpt = {
+ .name = "mfgpt",
+ .rating = 120, /* Functional for real use, but not desired */
+ .read = mfgpt_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .mult = 0,
+ .shift = 22,
+};
+
+int __init init_mfgpt_clocksource(void)
+{
+ if (num_possible_cpus() > 1) /* MFGPT does not scale! */
+ return 0;
+
+ clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22);
+ return clocksource_register(&clocksource_mfgpt);
+}
+
+arch_initcall(init_mfgpt_clocksource);
diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
new file mode 100644
index 00000000000..8fdb02b6e90
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c
@@ -0,0 +1,147 @@
+/*
+ * the OHCI Virtual Support Module of AMD CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+void pci_ohci_write_reg(int reg, u32 value)
+{
+ u32 hi = 0, lo = value;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+ if (value & PCI_COMMAND_MASTER)
+ hi |= PCI_COMMAND_MASTER;
+ else
+ hi &= ~PCI_COMMAND_MASTER;
+
+ if (value & PCI_COMMAND_MEMORY)
+ hi |= PCI_COMMAND_MEMORY;
+ else
+ hi &= ~PCI_COMMAND_MEMORY;
+ _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
+ break;
+ case PCI_STATUS:
+ if (value & PCI_STATUS_PARITY) {
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG) {
+ lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
+ _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
+ }
+ }
+ break;
+ case PCI_BAR0_REG:
+ if (value == PCI_BAR_RANGE_MASK) {
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ lo |= SOFT_BAR_OHCI_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else if ((value & 0x01) == 0x00) {
+ _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
+
+ value &= 0xfffffff0;
+ hi = 0x40000000 | ((value & 0xff000000) >> 24);
+ lo = 0x000fffff | ((value & 0x00fff000) << 8);
+ _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo);
+ }
+ break;
+ case PCI_OHCI_INT_REG:
+ _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+ lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT);
+ if (value) /* enable all the usb interrupt in PIC */
+ lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT);
+ _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
+ break;
+ default:
+ break;
+ }
+}
+
+u32 pci_ohci_read_reg(int reg)
+{
+ u32 conf_data = 0;
+ u32 hi, lo;
+
+ switch (reg) {
+ case PCI_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID);
+ break;
+ case PCI_COMMAND:
+ _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+ if (hi & PCI_COMMAND_MASTER)
+ conf_data |= PCI_COMMAND_MASTER;
+ if (hi & PCI_COMMAND_MEMORY)
+ conf_data |= PCI_COMMAND_MEMORY;
+ break;
+ case PCI_STATUS:
+ conf_data |= PCI_STATUS_66MHZ;
+ conf_data |= PCI_STATUS_FAST_BACK;
+ _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
+ if (lo & SB_PARE_ERR_FLAG)
+ conf_data |= PCI_STATUS_PARITY;
+ conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
+ break;
+ case PCI_CLASS_REVISION:
+ _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
+ conf_data = lo & 0x000000ff;
+ conf_data |= (CS5536_OHCI_CLASS_CODE << 8);
+ break;
+ case PCI_CACHE_LINE_SIZE:
+ conf_data =
+ CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
+ PCI_NORMAL_LATENCY_TIMER);
+ break;
+ case PCI_BAR0_REG:
+ _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
+ if (lo & SOFT_BAR_OHCI_FLAG) {
+ conf_data = CS5536_OHCI_RANGE |
+ PCI_BASE_ADDRESS_SPACE_MEMORY;
+ lo &= ~SOFT_BAR_OHCI_FLAG;
+ _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
+ } else {
+ _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+ conf_data = lo & 0xffffff00;
+ conf_data &= ~0x0000000f; /* 32bit mem */
+ }
+ break;
+ case PCI_CARDBUS_CIS:
+ conf_data = PCI_CARDBUS_CIS_POINTER;
+ break;
+ case PCI_SUBSYSTEM_VENDOR_ID:
+ conf_data =
+ CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
+ break;
+ case PCI_ROM_ADDRESS:
+ conf_data = PCI_EXPANSION_ROM_BAR;
+ break;
+ case PCI_CAPABILITY_LIST:
+ conf_data = PCI_CAPLIST_USB_POINTER;
+ break;
+ case PCI_INTERRUPT_LINE:
+ conf_data =
+ CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
+ break;
+ case PCI_OHCI_INT_REG:
+ _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
+ if ((lo & 0x00000f00) == CS5536_USB_INTR)
+ conf_data = 1;
+ break;
+ default:
+ break;
+ }
+
+ return conf_data;
+}
diff --git a/arch/mips/loongson/common/cs5536/cs5536_pci.c b/arch/mips/loongson/common/cs5536/cs5536_pci.c
new file mode 100644
index 00000000000..e23f3d7d2c1
--- /dev/null
+++ b/arch/mips/loongson/common/cs5536/cs5536_pci.c
@@ -0,0 +1,87 @@
+/*
+ * read/write operation to the PCI config space of CS5536
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu, liujl@lemote.com
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * the Virtual Support Module(VSM) for virtulizing the PCI
+ * configure space are defined in cs5536_modulename.c respectively,
+ *
+ * after this virtulizing, user can access the PCI configure space
+ * directly as a normal multi-function PCI device which follows
+ * the PCI-2.2 spec.
+ */
+
+#include <linux/types.h>
+#include <cs5536/cs5536_vsm.h>
+
+enum {
+ CS5536_FUNC_START = -1,
+ CS5536_ISA_FUNC,
+ reserved_func,
+ CS5536_IDE_FUNC,
+ CS5536_ACC_FUNC,
+ CS5536_OHCI_FUNC,
+ CS5536_EHCI_FUNC,
+ CS5536_FUNC_END,
+};
+
+static const cs5536_pci_vsm_write vsm_conf_write[] = {
+ [CS5536_ISA_FUNC] pci_isa_write_reg,
+ [reserved_func] NULL,
+ [CS5536_IDE_FUNC] pci_ide_write_reg,
+ [CS5536_ACC_FUNC] pci_acc_write_reg,
+ [CS5536_OHCI_FUNC] pci_ohci_write_reg,
+ [CS5536_EHCI_FUNC] pci_ehci_write_reg,
+};
+
+static const cs5536_pci_vsm_read vsm_conf_read[] = {
+ [CS5536_ISA_FUNC] pci_isa_read_reg,
+ [reserved_func] NULL,
+ [CS5536_IDE_FUNC] pci_ide_read_reg,
+ [CS5536_ACC_FUNC] pci_acc_read_reg,
+ [CS5536_OHCI_FUNC] pci_ohci_read_reg,
+ [CS5536_EHCI_FUNC] pci_ehci_read_reg,
+};
+
+/*
+ * write to PCI config space and transfer it to MSR write.
+ */
+void cs5536_pci_conf_write4(int function, int reg, u32 value)
+{
+ if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
+ return;
+ if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0))
+ return;
+
+ if (vsm_conf_write[function] != NULL)
+ vsm_conf_write[function](reg, value);
+}
+
+/*
+ * read PCI config space and transfer it to MSR access.
+ */
+u32 cs5536_pci_conf_read4(int function, int reg)
+{
+ u32 data = 0;
+
+ if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
+ return 0;
+ if ((reg < 0) || ((reg & 0x03) != 0))
+ return 0;
+ if (reg > 0x100)
+ return 0xffffffff;
+
+ if (vsm_conf_read[function] != NULL)
+ data = vsm_conf_read[function](reg);
+
+ return data;
+}
diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c
index bc73edc0cfd..23e7a8f8897 100644
--- a/arch/mips/loongson/common/early_printk.c
+++ b/arch/mips/loongson/common/early_printk.c
@@ -1,7 +1,7 @@
/* early printk support
*
* Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (c) 2009 Lemote Inc.
* Author: Wu Zhangjin, wuzj@lemote.com
*
* This program is free software; you can redistribute it and/or modify it
@@ -12,26 +12,29 @@
#include <linux/serial_reg.h>
#include <loongson.h>
-#include <machine.h>
#define PORT(base, offset) (u8 *)(base + offset)
-static inline unsigned int serial_in(phys_addr_t base, int offset)
+static inline unsigned int serial_in(unsigned char *base, int offset)
{
return readb(PORT(base, offset));
}
-static inline void serial_out(phys_addr_t base, int offset, int value)
+static inline void serial_out(unsigned char *base, int offset, int value)
{
writeb(value, PORT(base, offset));
}
void prom_putchar(char c)
{
- phys_addr_t uart_base =
- (phys_addr_t) ioremap_nocache(LOONGSON_UART_BASE, 8);
+ int timeout;
+ unsigned char *uart_base;
- while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0)
+ uart_base = (unsigned char *)_loongson_uart_base;
+ timeout = 1024;
+
+ while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) &&
+ (timeout-- > 0))
;
serial_out(uart_base, UART_TX, c);
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index b9ef5038554..196d947d929 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -17,11 +17,14 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
+#include <linux/module.h>
+
#include <asm/bootinfo.h>
#include <loongson.h>
unsigned long bus_clock, cpu_clock_freq;
+EXPORT_SYMBOL(cpu_clock_freq);
unsigned long memsize, highmemsize;
/* pmon passes arguments in 32bit pointers */
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
index 3abe927422a..a2abd935573 100644
--- a/arch/mips/loongson/common/init.c
+++ b/arch/mips/loongson/common/init.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2009 Lemote Inc.
* Author: Wu Zhangjin, wuzj@lemote.com
*
* This program is free software; you can redistribute it and/or modify it
@@ -10,19 +10,28 @@
#include <linux/bootmem.h>
-#include <asm/bootinfo.h>
-
#include <loongson.h>
+/* Loongson CPU address windows config space base address */
+unsigned long __maybe_unused _loongson_addrwincfg_base;
+
void __init prom_init(void)
{
- /* init base address of io space */
+ /* init base address of io space */
set_io_port_base((unsigned long)
- ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE));
+ ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+ _loongson_addrwincfg_base = (unsigned long)
+ ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
+#endif
prom_init_cmdline();
prom_init_env();
prom_init_memory();
+
+ /*init the uart base address */
+ prom_init_uart_base();
}
void __init prom_free_prom_memory(void)
diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c
index b32b4a3e513..20e73283197 100644
--- a/arch/mips/loongson/common/irq.c
+++ b/arch/mips/loongson/common/irq.c
@@ -20,21 +20,21 @@ void bonito_irqdispatch(void)
int i;
/* workaround the IO dma problem: let cpu looping to allow DMA finish */
- int_status = BONITO_INTISR;
+ int_status = LOONGSON_INTISR;
if (int_status & (1 << 10)) {
while (int_status & (1 << 10)) {
udelay(1);
- int_status = BONITO_INTISR;
+ int_status = LOONGSON_INTISR;
}
}
/* Get pending sources, masked by current enables */
- int_status = BONITO_INTISR & BONITO_INTEN;
+ int_status = LOONGSON_INTISR & LOONGSON_INTEN;
if (int_status != 0) {
i = __ffs(int_status);
int_status &= ~(1 << i);
- do_IRQ(BONITO_IRQ_BASE + i);
+ do_IRQ(LOONGSON_IRQ_BASE + i);
}
}
@@ -60,13 +60,13 @@ void __init arch_init_irq(void)
set_irq_trigger_mode();
/* no steer */
- BONITO_INTSTEER = 0;
+ LOONGSON_INTSTEER = 0;
/*
* Mask out all interrupt by writing "1" to all bit position in
* the interrupt reset reg.
*/
- BONITO_INTENCLR = ~0;
+ LOONGSON_INTENCLR = ~0;
/* machine specific irq init */
mach_init_irq();
diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c
index 7b348248de7..0ed52b3f531 100644
--- a/arch/mips/loongson/common/machtype.c
+++ b/arch/mips/loongson/common/machtype.c
@@ -15,6 +15,9 @@
#include <loongson.h>
#include <machine.h>
+/* please ensure the length of the machtype string is less than 50 */
+#define MACHTYPE_LEN 50
+
static const char *system_types[] = {
[MACH_LOONGSON_UNKNOWN] "unknown loongson machine",
[MACH_LEMOTE_FL2E] "lemote-fuloong-2e-box",
@@ -22,29 +25,35 @@ static const char *system_types[] = {
[MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches",
[MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches",
[MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches",
+ [MACH_LEMOTE_NAS] "lemote-nas-2f",
+ [MACH_LEMOTE_LL2F] "lemote-lynloong-2f",
[MACH_LOONGSON_END] NULL,
};
const char *get_system_type(void)
{
- if (mips_machtype == MACH_UNKNOWN)
- mips_machtype = LOONGSON_MACHTYPE;
-
return system_types[mips_machtype];
}
-static __init int machtype_setup(char *str)
+void __init prom_init_machtype(void)
{
+ char *p, str[MACHTYPE_LEN];
int machtype = MACH_LEMOTE_FL2E;
- if (!str)
- return -EINVAL;
+ mips_machtype = LOONGSON_MACHTYPE;
+
+ p = strstr(arcs_cmdline, "machtype=");
+ if (!p)
+ return;
+ p += strlen("machtype=");
+ strncpy(str, p, MACHTYPE_LEN);
+ p = strstr(str, " ");
+ if (p)
+ *p = '\0';
for (; system_types[machtype]; machtype++)
if (strstr(system_types[machtype], str)) {
mips_machtype = machtype;
break;
}
- return 0;
}
-__setup("machtype=", machtype_setup);
diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
index e94ef158f98..ceacd092b44 100644
--- a/arch/mips/loongson/common/mem.c
+++ b/arch/mips/loongson/common/mem.c
@@ -12,15 +12,40 @@
#include <loongson.h>
#include <mem.h>
+#include <pci.h>
void __init prom_init_memory(void)
{
add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+
+ add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
+ 20), BOOT_MEM_RESERVED);
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+ {
+ int bit;
+
+ bit = fls(memsize + highmemsize);
+ if (bit != ffs(memsize + highmemsize))
+ bit += 20;
+ else
+ bit = bit + 20 - 1;
+
+ /* set cpu window3 to map CPU to DDR: 2G -> 2G */
+ LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul,
+ 0x80000000ul, (1 << bit));
+ mmiowb();
+ }
+#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
+
#ifdef CONFIG_64BIT
- if (highmemsize > 0)
- add_memory_region(LOONGSON_HIGHMEM_START,
- highmemsize << 20, BOOT_MEM_RAM);
-#endif /* CONFIG_64BIT */
+ if (highmemsize > 0)
+ add_memory_region(LOONGSON_HIGHMEM_START,
+ highmemsize << 20, BOOT_MEM_RAM);
+
+ add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START -
+ LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED);
+
+#endif /* !CONFIG_64BIT */
}
/* override of arch/mips/mm/cache.c: __uncached_access */
@@ -33,3 +58,61 @@ int __uncached_access(struct file *file, unsigned long addr)
((addr >= LOONGSON_MMIO_MEM_START) &&
(addr < LOONGSON_MMIO_MEM_END));
}
+
+#ifdef CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED
+
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <asm/current.h>
+
+static unsigned long uca_start, uca_end;
+
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t vma_prot)
+{
+ unsigned long offset = pfn << PAGE_SHIFT;
+ unsigned long end = offset + size;
+
+ if (__uncached_access(file, offset)) {
+ if (((uca_start && offset) >= uca_start) &&
+ (end <= uca_end))
+ return __pgprot((pgprot_val(vma_prot) &
+ ~_CACHE_MASK) |
+ _CACHE_UNCACHED_ACCELERATED);
+ else
+ return pgprot_noncached(vma_prot);
+ }
+ return vma_prot;
+}
+
+static int __init find_vga_mem_init(void)
+{
+ struct pci_dev *dev = 0;
+ struct resource *r;
+ int idx;
+
+ if (uca_start)
+ return 0;
+
+ for_each_pci_dev(dev) {
+ if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) {
+ for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
+ r = &dev->resource[idx];
+ if (!r->start && r->end)
+ continue;
+ if (r->flags & IORESOURCE_IO)
+ continue;
+ if (r->flags & IORESOURCE_MEM) {
+ uca_start = r->start;
+ uca_end = r->end;
+ return 0;
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+late_initcall(find_vga_mem_init);
+#endif /* !CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED */
diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c
index a3a4abfb6c9..31d8c5ecd16 100644
--- a/arch/mips/loongson/common/pci.c
+++ b/arch/mips/loongson/common/pci.c
@@ -27,7 +27,7 @@ static struct resource loongson_pci_io_resource = {
};
static struct pci_controller loongson_pci_controller = {
- .pci_ops = &bonito64_pci_ops,
+ .pci_ops = &loongson_pci_ops,
.io_resource = &loongson_pci_io_resource,
.mem_resource = &loongson_pci_mem_resource,
.mem_offset = 0x00000000UL,
@@ -44,15 +44,15 @@ static void __init setup_pcimap(void)
* pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
* [<2G] [384M,448M] [320M,384M] [0M,64M]
*/
- BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 |
- BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) |
- BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) |
- BONITO_PCIMAP_WIN(0, 0);
+ LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 |
+ LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) |
+ LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) |
+ LOONGSON_PCIMAP_WIN(0, 0);
/*
* PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
*/
- BONITO_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */
+ LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */
/* size: 256M, burst transmission, pre-fetch enable, 64bit */
LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
@@ -67,6 +67,14 @@ static void __init setup_pcimap(void)
/* can not change gnt to break pci transfer when device's gnt not
deassert for some broken device */
LOONGSON_PXARB_CFG = 0x00fe0105ul;
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+ /*
+ * set cpu addr window2 to map CPU address space to PCI address space
+ */
+ LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC,
+ LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE);
+#endif
}
static int __init pcibios_init(void)
diff --git a/arch/mips/loongson/common/platform.c b/arch/mips/loongson/common/platform.c
new file mode 100644
index 00000000000..be81777eb94
--- /dev/null
+++ b/arch/mips/loongson/common/platform.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+static struct platform_device loongson2_cpufreq_device = {
+ .name = "loongson2_cpufreq",
+ .id = -1,
+};
+
+static int __init loongson2_cpufreq_init(void)
+{
+ struct cpuinfo_mips *c = &current_cpu_data;
+
+ /* Only 2F revision and it's successors support CPUFreq */
+ if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F)
+ return platform_device_register(&loongson2_cpufreq_device);
+
+ return -ENODEV;
+}
+
+arch_initcall(loongson2_cpufreq_init);
diff --git a/arch/mips/loongson/common/pm.c b/arch/mips/loongson/common/pm.c
new file mode 100644
index 00000000000..b625fec8a4d
--- /dev/null
+++ b/arch/mips/loongson/common/pm.c
@@ -0,0 +1,161 @@
+/*
+ * loongson-specific suspend support
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#include <loongson.h>
+
+static unsigned int __maybe_unused cached_master_mask; /* i8259A */
+static unsigned int __maybe_unused cached_slave_mask;
+static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */
+
+void arch_suspend_disable_irqs(void)
+{
+ /* disable all mips events */
+ local_irq_disable();
+
+#ifdef CONFIG_I8259
+ /* disable all events of i8259A */
+ cached_slave_mask = inb(PIC_SLAVE_IMR);
+ cached_master_mask = inb(PIC_MASTER_IMR);
+
+ outb(0xff, PIC_SLAVE_IMR);
+ inb(PIC_SLAVE_IMR);
+ outb(0xff, PIC_MASTER_IMR);
+ inb(PIC_MASTER_IMR);
+#endif
+ /* disable all events of bonito */
+ cached_bonito_irq_mask = LOONGSON_INTEN;
+ LOONGSON_INTENCLR = 0xffff;
+ (void)LOONGSON_INTENCLR;
+}
+
+void arch_suspend_enable_irqs(void)
+{
+ /* enable all mips events */
+ local_irq_enable();
+#ifdef CONFIG_I8259
+ /* only enable the cached events of i8259A */
+ outb(cached_slave_mask, PIC_SLAVE_IMR);
+ outb(cached_master_mask, PIC_MASTER_IMR);
+#endif
+ /* enable all cached events of bonito */
+ LOONGSON_INTENSET = cached_bonito_irq_mask;
+ (void)LOONGSON_INTENSET;
+}
+
+/*
+ * Setup the board-specific events for waking up loongson from wait mode
+ */
+void __weak setup_wakeup_events(void)
+{
+}
+
+/*
+ * Check wakeup events
+ */
+int __weak wakeup_loongson(void)
+{
+ return 1;
+}
+
+/*
+ * If the events are really what we want to wakeup the CPU, wake it up
+ * otherwise put the CPU asleep again.
+ */
+static void wait_for_wakeup_events(void)
+{
+ while (!wakeup_loongson())
+ LOONGSON_CHIPCFG0 &= ~0x7;
+}
+
+/*
+ * Stop all perf counters
+ *
+ * $24 is the control register of Loongson perf counter
+ */
+static inline void stop_perf_counters(void)
+{
+ __write_64bit_c0_register($24, 0, 0);
+}
+
+
+static void loongson_suspend_enter(void)
+{
+ static unsigned int cached_cpu_freq;
+
+ /* setup wakeup events via enabling the IRQs */
+ setup_wakeup_events();
+
+ stop_perf_counters();
+
+ cached_cpu_freq = LOONGSON_CHIPCFG0;
+
+ /* Put CPU into wait mode */
+ LOONGSON_CHIPCFG0 &= ~0x7;
+
+ /* wait for the given events to wakeup cpu from wait mode */
+ wait_for_wakeup_events();
+
+ LOONGSON_CHIPCFG0 = cached_cpu_freq;
+ mmiowb();
+}
+
+void __weak mach_suspend(void)
+{
+}
+
+void __weak mach_resume(void)
+{
+}
+
+static int loongson_pm_enter(suspend_state_t state)
+{
+ mach_suspend();
+
+ /* processor specific suspend */
+ loongson_suspend_enter();
+
+ mach_resume();
+
+ return 0;
+}
+
+static int loongson_pm_valid_state(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_ON:
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+static struct platform_suspend_ops loongson_pm_ops = {
+ .valid = loongson_pm_valid_state,
+ .enter = loongson_pm_enter,
+};
+
+static int __init loongson_pm_init(void)
+{
+ suspend_set_ops(&loongson_pm_ops);
+
+ return 0;
+}
+arch_initcall(loongson_pm_init);
diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c
index 97e918251ed..d57f1719da9 100644
--- a/arch/mips/loongson/common/reset.c
+++ b/arch/mips/loongson/common/reset.c
@@ -22,7 +22,7 @@ static void loongson_restart(char *command)
mach_prepare_reboot();
/* reboot via jumping to boot base address */
- ((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) ();
+ ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
}
static void loongson_halt(void)
diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c
new file mode 100644
index 00000000000..23b66a5f88c
--- /dev/null
+++ b/arch/mips/loongson/common/serial.c
@@ -0,0 +1,76 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Yan hua (yanhua@lemote.com)
+ * Author: Wu Zhangjin (wuzj@lemote.com)
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+#define PORT(int) \
+{ \
+ .irq = int, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
+ .regshift = 0, \
+}
+
+#define PORT_M(int) \
+{ \
+ .irq = MIPS_CPU_IRQ_BASE + (int), \
+ .uartclk = 3686400, \
+ .iotype = UPIO_MEM, \
+ .membase = (void __iomem *)NULL, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
+ .regshift = 0, \
+}
+
+static struct plat_serial8250_port uart8250_data[][2] = {
+ [MACH_LOONGSON_UNKNOWN] {},
+ [MACH_LEMOTE_FL2E] {PORT(4), {} },
+ [MACH_LEMOTE_FL2F] {PORT(3), {} },
+ [MACH_LEMOTE_ML2F7] {PORT_M(3), {} },
+ [MACH_LEMOTE_YL2F89] {PORT_M(3), {} },
+ [MACH_DEXXON_GDIUM2F10] {PORT_M(3), {} },
+ [MACH_LEMOTE_NAS] {PORT_M(3), {} },
+ [MACH_LEMOTE_LL2F] {PORT(3), {} },
+ [MACH_LOONGSON_END] {},
+};
+
+static struct platform_device uart8250_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+};
+
+static int __init serial_init(void)
+{
+ unsigned char iotype;
+
+ iotype = uart8250_data[mips_machtype][0].iotype;
+
+ if (UPIO_MEM == iotype)
+ uart8250_data[mips_machtype][0].membase =
+ (void __iomem *)_loongson_uart_base;
+ else if (UPIO_PORT == iotype)
+ uart8250_data[mips_machtype][0].iobase =
+ loongson_uart_base - LOONGSON_PCIIO_BASE;
+
+ uart8250_device.dev.platform_data = uart8250_data[mips_machtype];
+
+ return platform_device_register(&uart8250_device);
+}
+
+device_initcall(serial_init);
diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c
index 6e08c8270ab..35f0b66a94f 100644
--- a/arch/mips/loongson/common/time.c
+++ b/arch/mips/loongson/common/time.c
@@ -14,11 +14,14 @@
#include <asm/time.h>
#include <loongson.h>
+#include <cs5536/cs5536_mfgpt.h>
void __init plat_time_init(void)
{
/* setup mips r4k timer */
mips_hpt_frequency = cpu_clock_freq / 2;
+
+ setup_mfgpt0_timer();
}
void read_persistent_clock(struct timespec *ts)
diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c
new file mode 100644
index 00000000000..78ff66ae749
--- /dev/null
+++ b/arch/mips/loongson/common/uart_base.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+/* ioremapped */
+unsigned long _loongson_uart_base;
+EXPORT_SYMBOL(_loongson_uart_base);
+/* raw */
+unsigned long loongson_uart_base;
+EXPORT_SYMBOL(loongson_uart_base);
+
+void prom_init_loongson_uart_base(void)
+{
+ switch (mips_machtype) {
+ case MACH_LEMOTE_FL2E:
+ loongson_uart_base = LOONGSON_PCIIO_BASE + 0x3f8;
+ break;
+ case MACH_LEMOTE_FL2F:
+ case MACH_LEMOTE_LL2F:
+ loongson_uart_base = LOONGSON_PCIIO_BASE + 0x2f8;
+ break;
+ case MACH_LEMOTE_ML2F7:
+ case MACH_LEMOTE_YL2F89:
+ case MACH_DEXXON_GDIUM2F10:
+ case MACH_LEMOTE_NAS:
+ default:
+ /* The CPU provided serial port */
+ loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8;
+ break;
+ }
+
+ _loongson_uart_base =
+ (unsigned long)ioremap_nocache(loongson_uart_base, 8);
+}
diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c
index 7888cf69424..320e9379bdd 100644
--- a/arch/mips/loongson/fuloong-2e/irq.c
+++ b/arch/mips/loongson/fuloong-2e/irq.c
@@ -47,8 +47,8 @@ static struct irqaction cascade_irqaction = {
void __init set_irq_trigger_mode(void)
{
/* most bonito irq should be level triggered */
- BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR |
- BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES;
+ LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR |
+ LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES;
}
void __init mach_init_irq(void)
diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c
index 677fe186db9..fc16c677d47 100644
--- a/arch/mips/loongson/fuloong-2e/reset.c
+++ b/arch/mips/loongson/fuloong-2e/reset.c
@@ -14,8 +14,8 @@
void mach_prepare_reboot(void)
{
- BONITO_BONGENCFG &= ~(1 << 2);
- BONITO_BONGENCFG |= (1 << 2);
+ LOONGSON_GENCFG &= ~(1 << 2);
+ LOONGSON_GENCFG |= (1 << 2);
}
void mach_prepare_shutdown(void)
diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile
new file mode 100644
index 00000000000..4d84b27dc41
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for lemote loongson2f family machines
+#
+
+obj-y += irq.o reset.o ec_kb3310b.o
+
+#
+# Suspend Support
+#
+
+obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.c b/arch/mips/loongson/lemote-2f/ec_kb3310b.c
new file mode 100644
index 00000000000..4d84111a2cd
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.c
@@ -0,0 +1,130 @@
+/*
+ * Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook
+ *
+ * Copyright (C) 2008 Lemote Inc.
+ * Author: liujl <liujl@lemote.com>, 2008-04-20
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+#include "ec_kb3310b.h"
+
+static DEFINE_SPINLOCK(index_access_lock);
+static DEFINE_SPINLOCK(port_access_lock);
+
+unsigned char ec_read(unsigned short addr)
+{
+ unsigned char value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&index_access_lock, flags);
+ outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
+ outb((addr & 0x00ff), EC_IO_PORT_LOW);
+ value = inb(EC_IO_PORT_DATA);
+ spin_unlock_irqrestore(&index_access_lock, flags);
+
+ return value;
+}
+EXPORT_SYMBOL_GPL(ec_read);
+
+void ec_write(unsigned short addr, unsigned char val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&index_access_lock, flags);
+ outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
+ outb((addr & 0x00ff), EC_IO_PORT_LOW);
+ outb(val, EC_IO_PORT_DATA);
+ /* flush the write action */
+ inb(EC_IO_PORT_DATA);
+ spin_unlock_irqrestore(&index_access_lock, flags);
+
+ return;
+}
+EXPORT_SYMBOL_GPL(ec_write);
+
+/*
+ * This function is used for EC command writes and corresponding status queries.
+ */
+int ec_query_seq(unsigned char cmd)
+{
+ int timeout;
+ unsigned char status;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&port_access_lock, flags);
+
+ /* make chip goto reset mode */
+ udelay(EC_REG_DELAY);
+ outb(cmd, EC_CMD_PORT);
+ udelay(EC_REG_DELAY);
+
+ /* check if the command is received by ec */
+ timeout = EC_CMD_TIMEOUT;
+ status = inb(EC_STS_PORT);
+ while (timeout-- && (status & (1 << 1))) {
+ status = inb(EC_STS_PORT);
+ udelay(EC_REG_DELAY);
+ }
+
+ if (timeout <= 0) {
+ printk(KERN_ERR "%s: deadable error : timeout...\n", __func__);
+ ret = -EINVAL;
+ } else
+ printk(KERN_INFO
+ "(%x/%d)ec issued command %d status : 0x%x\n",
+ timeout, EC_CMD_TIMEOUT - timeout, cmd, status);
+
+ spin_unlock_irqrestore(&port_access_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ec_query_seq);
+
+/*
+ * Send query command to EC to get the proper event number
+ */
+int ec_query_event_num(void)
+{
+ return ec_query_seq(CMD_GET_EVENT_NUM);
+}
+EXPORT_SYMBOL(ec_query_event_num);
+
+/*
+ * Get event number from EC
+ *
+ * NOTE: This routine must follow the query_event_num function in the
+ * interrupt.
+ */
+int ec_get_event_num(void)
+{
+ int timeout = 100;
+ unsigned char value;
+ unsigned char status;
+
+ udelay(EC_REG_DELAY);
+ status = inb(EC_STS_PORT);
+ udelay(EC_REG_DELAY);
+ while (timeout-- && !(status & (1 << 0))) {
+ status = inb(EC_STS_PORT);
+ udelay(EC_REG_DELAY);
+ }
+ if (timeout <= 0) {
+ pr_info("%s: get event number timeout.\n", __func__);
+
+ return -EINVAL;
+ }
+ value = inb(EC_DAT_PORT);
+ udelay(EC_REG_DELAY);
+
+ return value;
+}
+EXPORT_SYMBOL(ec_get_event_num);
diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
new file mode 100644
index 00000000000..1595a21b315
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
@@ -0,0 +1,188 @@
+/*
+ * KB3310B Embedded Controller
+ *
+ * Copyright (C) 2008 Lemote Inc.
+ * Author: liujl <liujl@lemote.com>, 2008-03-14
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _EC_KB3310B_H
+#define _EC_KB3310B_H
+
+extern unsigned char ec_read(unsigned short addr);
+extern void ec_write(unsigned short addr, unsigned char val);
+extern int ec_query_seq(unsigned char cmd);
+extern int ec_query_event_num(void);
+extern int ec_get_event_num(void);
+
+typedef int (*sci_handler) (int status);
+extern sci_handler yeeloong_report_lid_status;
+
+#define SCI_IRQ_NUM 0x0A
+
+/*
+ * The following registers are determined by the EC index configuration.
+ * 1, fill the PORT_HIGH as EC register high part.
+ * 2, fill the PORT_LOW as EC register low part.
+ * 3, fill the PORT_DATA as EC register write data or get the data from it.
+ */
+#define EC_IO_PORT_HIGH 0x0381
+#define EC_IO_PORT_LOW 0x0382
+#define EC_IO_PORT_DATA 0x0383
+
+/*
+ * EC delay time is 500us for register and status access
+ */
+#define EC_REG_DELAY 500 /* unit : us */
+#define EC_CMD_TIMEOUT 0x1000
+
+/*
+ * EC access port for SCI communication
+ */
+#define EC_CMD_PORT 0x66
+#define EC_STS_PORT 0x66
+#define EC_DAT_PORT 0x62
+#define CMD_INIT_IDLE_MODE 0xdd
+#define CMD_EXIT_IDLE_MODE 0xdf
+#define CMD_INIT_RESET_MODE 0xd8
+#define CMD_REBOOT_SYSTEM 0x8c
+#define CMD_GET_EVENT_NUM 0x84
+#define CMD_PROGRAM_PIECE 0xda
+
+/* temperature & fan registers */
+#define REG_TEMPERATURE_VALUE 0xF458
+#define REG_FAN_AUTO_MAN_SWITCH 0xF459
+#define BIT_FAN_AUTO 0
+#define BIT_FAN_MANUAL 1
+#define REG_FAN_CONTROL 0xF4D2
+#define BIT_FAN_CONTROL_ON (1 << 0)
+#define BIT_FAN_CONTROL_OFF (0 << 0)
+#define REG_FAN_STATUS 0xF4DA
+#define BIT_FAN_STATUS_ON (1 << 0)
+#define BIT_FAN_STATUS_OFF (0 << 0)
+#define REG_FAN_SPEED_HIGH 0xFE22
+#define REG_FAN_SPEED_LOW 0xFE23
+#define REG_FAN_SPEED_LEVEL 0xF4CC
+/* fan speed divider */
+#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/
+
+/* battery registers */
+#define REG_BAT_DESIGN_CAP_HIGH 0xF77D
+#define REG_BAT_DESIGN_CAP_LOW 0xF77E
+#define REG_BAT_FULLCHG_CAP_HIGH 0xF780
+#define REG_BAT_FULLCHG_CAP_LOW 0xF781
+#define REG_BAT_DESIGN_VOL_HIGH 0xF782
+#define REG_BAT_DESIGN_VOL_LOW 0xF783
+#define REG_BAT_CURRENT_HIGH 0xF784
+#define REG_BAT_CURRENT_LOW 0xF785
+#define REG_BAT_VOLTAGE_HIGH 0xF786
+#define REG_BAT_VOLTAGE_LOW 0xF787
+#define REG_BAT_TEMPERATURE_HIGH 0xF788
+#define REG_BAT_TEMPERATURE_LOW 0xF789
+#define REG_BAT_RELATIVE_CAP_HIGH 0xF492
+#define REG_BAT_RELATIVE_CAP_LOW 0xF493
+#define REG_BAT_VENDOR 0xF4C4
+#define FLAG_BAT_VENDOR_SANYO 0x01
+#define FLAG_BAT_VENDOR_SIMPLO 0x02
+#define REG_BAT_CELL_COUNT 0xF4C6
+#define FLAG_BAT_CELL_3S1P 0x03
+#define FLAG_BAT_CELL_3S2P 0x06
+#define REG_BAT_CHARGE 0xF4A2
+#define FLAG_BAT_CHARGE_DISCHARGE 0x01
+#define FLAG_BAT_CHARGE_CHARGE 0x02
+#define FLAG_BAT_CHARGE_ACPOWER 0x00
+#define REG_BAT_STATUS 0xF4B0
+#define BIT_BAT_STATUS_LOW (1 << 5)
+#define BIT_BAT_STATUS_DESTROY (1 << 2)
+#define BIT_BAT_STATUS_FULL (1 << 1)
+#define BIT_BAT_STATUS_IN (1 << 0)
+#define REG_BAT_CHARGE_STATUS 0xF4B1
+#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2)
+#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1)
+#define REG_BAT_STATE 0xF482
+#define BIT_BAT_STATE_CHARGING (1 << 1)
+#define BIT_BAT_STATE_DISCHARGING (1 << 0)
+#define REG_BAT_POWER 0xF440
+#define BIT_BAT_POWER_S3 (1 << 2)
+#define BIT_BAT_POWER_ON (1 << 1)
+#define BIT_BAT_POWER_ACIN (1 << 0)
+
+/* other registers */
+/* Audio: rd/wr */
+#define REG_AUDIO_VOLUME 0xF46C
+#define REG_AUDIO_MUTE 0xF4E7
+#define REG_AUDIO_BEEP 0xF4D0
+/* USB port power or not: rd/wr */
+#define REG_USB0_FLAG 0xF461
+#define REG_USB1_FLAG 0xF462
+#define REG_USB2_FLAG 0xF463
+#define BIT_USB_FLAG_ON 1
+#define BIT_USB_FLAG_OFF 0
+/* LID */
+#define REG_LID_DETECT 0xF4BD
+#define BIT_LID_DETECT_ON 1
+#define BIT_LID_DETECT_OFF 0
+/* CRT */
+#define REG_CRT_DETECT 0xF4AD
+#define BIT_CRT_DETECT_PLUG 1
+#define BIT_CRT_DETECT_UNPLUG 0
+/* LCD backlight brightness adjust: 9 levels */
+#define REG_DISPLAY_BRIGHTNESS 0xF4F5
+/* Black screen Status */
+#define BIT_DISPLAY_LCD_ON 1
+#define BIT_DISPLAY_LCD_OFF 0
+/* LCD backlight control: off/restore */
+#define REG_BACKLIGHT_CTRL 0xF7BD
+#define BIT_BACKLIGHT_ON 1
+#define BIT_BACKLIGHT_OFF 0
+/* Reset the machine auto-clear: rd/wr */
+#define REG_RESET 0xF4EC
+#define BIT_RESET_ON 1
+/* Light the led: rd/wr */
+#define REG_LED 0xF4C8
+#define BIT_LED_RED_POWER (1 << 0)
+#define BIT_LED_ORANGE_POWER (1 << 1)
+#define BIT_LED_GREEN_CHARGE (1 << 2)
+#define BIT_LED_RED_CHARGE (1 << 3)
+#define BIT_LED_NUMLOCK (1 << 4)
+/* Test led mode, all led on/off */
+#define REG_LED_TEST 0xF4C2
+#define BIT_LED_TEST_IN 1
+#define BIT_LED_TEST_OUT 0
+/* Camera on/off */
+#define REG_CAMERA_STATUS 0xF46A
+#define BIT_CAMERA_STATUS_ON 1
+#define BIT_CAMERA_STATUS_OFF 0
+#define REG_CAMERA_CONTROL 0xF7B7
+#define BIT_CAMERA_CONTROL_OFF 0
+#define BIT_CAMERA_CONTROL_ON 1
+/* Wlan Status */
+#define REG_WLAN 0xF4FA
+#define BIT_WLAN_ON 1
+#define BIT_WLAN_OFF 0
+#define REG_DISPLAY_LCD 0xF79F
+
+/* SCI Event Number from EC */
+enum {
+ EVENT_LID = 0x23, /* LID open/close */
+ EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */
+ EVENT_SLEEP, /* Fn+F1 for entering sleep mode */
+ EVENT_OVERTEMP, /* Over-temperature happened */
+ EVENT_CRT_DETECT, /* CRT is connected */
+ EVENT_CAMERA, /* Camera on/off */
+ EVENT_USB_OC2, /* USB2 Over Current occurred */
+ EVENT_USB_OC0, /* USB0 Over Current occurred */
+ EVENT_BLACK_SCREEN, /* Turn on/off backlight */
+ EVENT_AUDIO_MUTE, /* Mute on/off */
+ EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */
+ EVENT_AC_BAT, /* AC & Battery relative issue */
+ EVENT_AUDIO_VOLUME, /* Volume adjust */
+ EVENT_WLAN, /* Wlan on/off */
+ EVENT_END
+};
+
+#endif /* !_EC_KB3310B_H */
diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c
new file mode 100644
index 00000000000..77d32f9cf31
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/irq.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2007 Lemote Inc.
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+#define LOONGSON_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
+#define LOONGSON_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
+#define LOONGSON_NORTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 6) /* bonito */
+#define LOONGSON_UART_IRQ (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */
+#define LOONGSON_SOUTH_BRIDGE_IRQ (MIPS_CPU_IRQ_BASE + 2) /* i8259 */
+
+#define LOONGSON_INT_BIT_INT0 (1 << 11)
+#define LOONGSON_INT_BIT_INT1 (1 << 12)
+
+/*
+ * The generic i8259_irq() make the kernel hang on booting. Since we cannot
+ * get the irq via the IRR directly, we access the ISR instead.
+ */
+int mach_i8259_irq(void)
+{
+ int irq, isr;
+
+ irq = -1;
+
+ if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
+ spin_lock(&i8259A_lock);
+ isr = inb(PIC_MASTER_CMD) &
+ ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR);
+ if (!isr)
+ isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8;
+ irq = ffs(isr) - 1;
+ if (unlikely(irq == 7)) {
+ /*
+ * This may be a spurious interrupt.
+ *
+ * Read the interrupt status register (ISR). If the most
+ * significant bit is not set then there is no valid
+ * interrupt.
+ */
+ outb(0x0B, PIC_MASTER_ISR); /* ISR register */
+ if (~inb(PIC_MASTER_ISR) & 0x80)
+ irq = -1;
+ }
+ spin_unlock(&i8259A_lock);
+ }
+
+ return irq;
+}
+EXPORT_SYMBOL(mach_i8259_irq);
+
+static void i8259_irqdispatch(void)
+{
+ int irq;
+
+ irq = mach_i8259_irq();
+ if (irq >= 0)
+ do_IRQ(irq);
+ else
+ spurious_interrupt();
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+ if (pending & CAUSEF_IP7)
+ do_IRQ(LOONGSON_TIMER_IRQ);
+ else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */
+#ifdef CONFIG_OPROFILE
+ do_IRQ(LOONGSON2_PERFCNT_IRQ);
+#endif
+ bonito_irqdispatch();
+ } else if (pending & CAUSEF_IP3) /* CPU UART */
+ do_IRQ(LOONGSON_UART_IRQ);
+ else if (pending & CAUSEF_IP2) /* South Bridge */
+ i8259_irqdispatch();
+ else
+ spurious_interrupt();
+}
+
+void __init set_irq_trigger_mode(void)
+{
+ /* setup cs5536 as high level trigger */
+ LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
+ LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
+}
+
+static irqreturn_t ip6_action(int cpl, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+struct irqaction ip6_irqaction = {
+ .handler = ip6_action,
+ .name = "cascade",
+ .flags = IRQF_SHARED,
+};
+
+struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+void __init mach_init_irq(void)
+{
+ /* init all controller
+ * 0-15 ------> i8259 interrupt
+ * 16-23 ------> mips cpu interrupt
+ * 32-63 ------> bonito irq
+ */
+
+ /* Sets the first-level interrupt dispatcher. */
+ mips_cpu_irq_init();
+ init_i8259_irqs();
+ bonito_irq_init();
+
+ /* setup north bridge irq (bonito) */
+ setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
+ /* setup source bridge irq (i8259) */
+ setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
+}
diff --git a/arch/mips/loongson/lemote-2f/pm.c b/arch/mips/loongson/lemote-2f/pm.c
new file mode 100644
index 00000000000..d7af2e61659
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/pm.c
@@ -0,0 +1,149 @@
+/*
+ * Lemote loongson2f family machines' specific suspend support
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/i8042.h>
+#include <linux/module.h>
+
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+#include <cs5536/cs5536_mfgpt.h>
+#include "ec_kb3310b.h"
+
+#define I8042_KBD_IRQ 1
+#define I8042_CTR_KBDINT 0x01
+#define I8042_CTR_KBDDIS 0x10
+
+static unsigned char i8042_ctr;
+
+static int i8042_enable_kbd_port(void)
+{
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
+ pr_err("i8042.c: Can't read CTR while enabling i8042 kbd port."
+ "\n");
+ return -EIO;
+ }
+
+ i8042_ctr &= ~I8042_CTR_KBDDIS;
+ i8042_ctr |= I8042_CTR_KBDINT;
+
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+ i8042_ctr &= ~I8042_CTR_KBDINT;
+ i8042_ctr |= I8042_CTR_KBDDIS;
+ pr_err("i8042.c: Failed to enable KBD port.\n");
+
+ return -EIO;
+ }
+
+ return 0;
+}
+
+void setup_wakeup_events(void)
+{
+ int irq_mask;
+
+ switch (mips_machtype) {
+ case MACH_LEMOTE_ML2F7:
+ case MACH_LEMOTE_YL2F89:
+ /* open the keyboard irq in i8259A */
+ outb((0xff & ~(1 << I8042_KBD_IRQ)), PIC_MASTER_IMR);
+ irq_mask = inb(PIC_MASTER_IMR);
+
+ /* enable keyboard port */
+ i8042_enable_kbd_port();
+
+ /* Wakeup CPU via SCI lid open event */
+ outb(irq_mask & ~(1 << PIC_CASCADE_IR), PIC_MASTER_IMR);
+ inb(PIC_MASTER_IMR);
+ outb(0xff & ~(1 << (SCI_IRQ_NUM - 8)), PIC_SLAVE_IMR);
+ inb(PIC_SLAVE_IMR);
+
+ break;
+
+ default:
+ break;
+ }
+}
+
+static struct delayed_work lid_task;
+static int initialized;
+/* yeeloong_report_lid_status will be implemented in yeeloong_laptop.c */
+sci_handler yeeloong_report_lid_status;
+EXPORT_SYMBOL(yeeloong_report_lid_status);
+static void yeeloong_lid_update_task(struct work_struct *work)
+{
+ if (yeeloong_report_lid_status)
+ yeeloong_report_lid_status(BIT_LID_DETECT_ON);
+}
+
+int wakeup_loongson(void)
+{
+ int irq;
+
+ /* query the interrupt number */
+ irq = mach_i8259_irq();
+ if (irq < 0)
+ return 0;
+
+ printk(KERN_INFO "%s: irq = %d\n", __func__, irq);
+
+ if (irq == I8042_KBD_IRQ)
+ return 1;
+ else if (irq == SCI_IRQ_NUM) {
+ int ret, sci_event;
+ /* query the event number */
+ ret = ec_query_seq(CMD_GET_EVENT_NUM);
+ if (ret < 0)
+ return 0;
+ sci_event = ec_get_event_num();
+ if (sci_event < 0)
+ return 0;
+ if (sci_event == EVENT_LID) {
+ int lid_status;
+ /* check the LID status */
+ lid_status = ec_read(REG_LID_DETECT);
+ /* wakeup cpu when people open the LID */
+ if (lid_status == BIT_LID_DETECT_ON) {
+ /* If we call it directly here, the WARNING
+ * will be sent out by getnstimeofday
+ * via "WARN_ON(timekeeping_suspended);"
+ * because we can not schedule in suspend mode.
+ */
+ if (initialized == 0) {
+ INIT_DELAYED_WORK(&lid_task,
+ yeeloong_lid_update_task);
+ initialized = 1;
+ }
+ schedule_delayed_work(&lid_task, 1);
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+}
+
+void __weak mach_suspend(void)
+{
+ disable_mfgpt0_counter();
+}
+
+void __weak mach_resume(void)
+{
+ enable_mfgpt0_counter();
+}
diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c
new file mode 100644
index 00000000000..51d1a60d534
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/reset.c
@@ -0,0 +1,159 @@
+/* Board-specific reboot/shutdown routines
+ *
+ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+#include <cs5536/cs5536.h>
+#include "ec_kb3310b.h"
+
+static void reset_cpu(void)
+{
+ /*
+ * reset cpu to full speed, this is needed when enabling cpu frequency
+ * scalling
+ */
+ LOONGSON_CHIPCFG0 |= 0x7;
+}
+
+/* reset support for fuloong2f */
+
+static void fl2f_reboot(void)
+{
+ reset_cpu();
+
+ /* send a reset signal to south bridge.
+ *
+ * NOTE: if enable "Power Management" in kernel, rtl8169 will not reset
+ * normally with this reset operation and it will not work in PMON, but
+ * you can type halt command and then reboot, seems the hardware reset
+ * logic not work normally.
+ */
+ {
+ u32 hi, lo;
+ _rdmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), &hi, &lo);
+ lo |= 0x00000001;
+ _wrmsr(DIVIL_MSR_REG(DIVIL_SOFT_RESET), hi, lo);
+ }
+}
+
+static void fl2f_shutdown(void)
+{
+ u32 hi, lo, val;
+ int gpio_base;
+
+ /* get gpio base */
+ _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_GPIO), &hi, &lo);
+ gpio_base = lo & 0xff00;
+
+ /* make cs5536 gpio13 output enable */
+ val = inl(gpio_base + GPIOL_OUT_EN);
+ val &= ~(1 << (16 + 13));
+ val |= (1 << 13);
+ outl(val, gpio_base + GPIOL_OUT_EN);
+ mmiowb();
+ /* make cs5536 gpio13 output low level voltage. */
+ val = inl(gpio_base + GPIOL_OUT_VAL) & ~(1 << (13));
+ val |= (1 << (16 + 13));
+ outl(val, gpio_base + GPIOL_OUT_VAL);
+ mmiowb();
+}
+
+/* reset support for yeeloong2f and mengloong2f notebook */
+
+void ml2f_reboot(void)
+{
+ reset_cpu();
+
+ /* sending an reset signal to EC(embedded controller) */
+ ec_write(REG_RESET, BIT_RESET_ON);
+}
+
+#define yl2f89_reboot ml2f_reboot
+
+/* menglong(7inches) laptop has different shutdown logic from 8.9inches */
+#define EC_SHUTDOWN_IO_PORT_HIGH 0xff2d
+#define EC_SHUTDOWN_IO_PORT_LOW 0xff2e
+#define EC_SHUTDOWN_IO_PORT_DATA 0xff2f
+#define REG_SHUTDOWN_HIGH 0xFC
+#define REG_SHUTDOWN_LOW 0x29
+#define BIT_SHUTDOWN_ON (1 << 1)
+
+static void ml2f_shutdown(void)
+{
+ u8 val;
+ u64 i;
+
+ outb(REG_SHUTDOWN_HIGH, EC_SHUTDOWN_IO_PORT_HIGH);
+ outb(REG_SHUTDOWN_LOW, EC_SHUTDOWN_IO_PORT_LOW);
+ mmiowb();
+ val = inb(EC_SHUTDOWN_IO_PORT_DATA);
+ outb(val & (~BIT_SHUTDOWN_ON), EC_SHUTDOWN_IO_PORT_DATA);
+ mmiowb();
+ /* need enough wait here... how many microseconds needs? */
+ for (i = 0; i < 0x10000; i++)
+ delay();
+ outb(val | BIT_SHUTDOWN_ON, EC_SHUTDOWN_IO_PORT_DATA);
+ mmiowb();
+}
+
+static void yl2f89_shutdown(void)
+{
+ /* cpu-gpio0 output low */
+ LOONGSON_GPIODATA &= ~0x00000001;
+ /* cpu-gpio0 as output */
+ LOONGSON_GPIOIE &= ~0x00000001;
+}
+
+void mach_prepare_reboot(void)
+{
+ switch (mips_machtype) {
+ case MACH_LEMOTE_FL2F:
+ case MACH_LEMOTE_NAS:
+ case MACH_LEMOTE_LL2F:
+ fl2f_reboot();
+ break;
+ case MACH_LEMOTE_ML2F7:
+ ml2f_reboot();
+ break;
+ case MACH_LEMOTE_YL2F89:
+ yl2f89_reboot();
+ break;
+ default:
+ break;
+ }
+}
+
+void mach_prepare_shutdown(void)
+{
+ switch (mips_machtype) {
+ case MACH_LEMOTE_FL2F:
+ case MACH_LEMOTE_NAS:
+ case MACH_LEMOTE_LL2F:
+ fl2f_shutdown();
+ break;
+ case MACH_LEMOTE_ML2F7:
+ ml2f_shutdown();
+ break;
+ case MACH_LEMOTE_YL2F89:
+ yl2f89_shutdown();
+ break;
+ default:
+ break;
+ }
+}