aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/pmcs-msp71xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pmcs-msp71xx')
-rw-r--r--arch/mips/pmcs-msp71xx/Kconfig48
-rw-r--r--arch/mips/pmcs-msp71xx/Makefile14
-rw-r--r--arch/mips/pmcs-msp71xx/Platform7
-rw-r--r--arch/mips/pmcs-msp71xx/gpio.c216
-rw-r--r--arch/mips/pmcs-msp71xx/gpio_extended.c146
-rw-r--r--arch/mips/pmcs-msp71xx/msp_elb.c46
-rw-r--r--arch/mips/pmcs-msp71xx/msp_eth.c187
-rw-r--r--arch/mips/pmcs-msp71xx/msp_hwbutton.c165
-rw-r--r--arch/mips/pmcs-msp71xx/msp_irq.c164
-rw-r--r--arch/mips/pmcs-msp71xx/msp_irq_cic.c216
-rw-r--r--arch/mips/pmcs-msp71xx/msp_irq_per.c134
-rw-r--r--arch/mips/pmcs-msp71xx/msp_irq_slp.c106
-rw-r--r--arch/mips/pmcs-msp71xx/msp_pci.c50
-rw-r--r--arch/mips/pmcs-msp71xx/msp_prom.c503
-rw-r--r--arch/mips/pmcs-msp71xx/msp_serial.c154
-rw-r--r--arch/mips/pmcs-msp71xx/msp_setup.c245
-rw-r--r--arch/mips/pmcs-msp71xx/msp_smp.c77
-rw-r--r--arch/mips/pmcs-msp71xx/msp_smtc.c105
-rw-r--r--arch/mips/pmcs-msp71xx/msp_time.c101
-rw-r--r--arch/mips/pmcs-msp71xx/msp_usb.c263
20 files changed, 2947 insertions, 0 deletions
diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
new file mode 100644
index 00000000000..3482b8c8640
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/Kconfig
@@ -0,0 +1,48 @@
+choice
+ prompt "PMC-Sierra MSP SOC type"
+ depends on PMC_MSP
+
+config PMC_MSP4200_EVAL
+ bool "PMC-Sierra MSP4200 Eval Board"
+ select IRQ_MSP_SLP
+ select HW_HAS_PCI
+
+config PMC_MSP4200_GW
+ bool "PMC-Sierra MSP4200 VoIP Gateway"
+ select IRQ_MSP_SLP
+ select HW_HAS_PCI
+
+config PMC_MSP7120_EVAL
+ bool "PMC-Sierra MSP7120 Eval Board"
+ select SYS_SUPPORTS_MULTITHREADING
+ select IRQ_MSP_CIC
+ select HW_HAS_PCI
+
+config PMC_MSP7120_GW
+ bool "PMC-Sierra MSP7120 Residential Gateway"
+ select SYS_SUPPORTS_MULTITHREADING
+ select IRQ_MSP_CIC
+ select HW_HAS_PCI
+ select MSP_HAS_USB
+ select MSP_ETH
+
+config PMC_MSP7120_FPGA
+ bool "PMC-Sierra MSP7120 FPGA"
+ select SYS_SUPPORTS_MULTITHREADING
+ select IRQ_MSP_CIC
+ select HW_HAS_PCI
+
+endchoice
+
+config MSP_HAS_USB
+ boolean
+ depends on PMC_MSP
+
+config MSP_ETH
+ boolean
+ select MSP_HAS_MAC
+ depends on PMC_MSP
+
+config MSP_HAS_MAC
+ boolean
+ depends on PMC_MSP
diff --git a/arch/mips/pmcs-msp71xx/Makefile b/arch/mips/pmcs-msp71xx/Makefile
new file mode 100644
index 00000000000..cefba7733b7
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the PMC-Sierra MSP SOCs
+#
+obj-y += msp_prom.o msp_setup.o msp_irq.o \
+ msp_time.o msp_serial.o msp_elb.o
+obj-$(CONFIG_HAVE_GPIO_LIB) += gpio.o gpio_extended.o
+obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
+obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
+obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o
+obj-$(CONFIG_PCI) += msp_pci.o
+obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o
+obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o
+obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o
+obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o
diff --git a/arch/mips/pmcs-msp71xx/Platform b/arch/mips/pmcs-msp71xx/Platform
new file mode 100644
index 00000000000..7af0734a500
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/Platform
@@ -0,0 +1,7 @@
+#
+# PMC-Sierra MSP SOCs
+#
+platform-$(CONFIG_PMC_MSP) += pmcs-msp71xx/
+cflags-$(CONFIG_PMC_MSP) += -I$(srctree)/arch/mips/include/asm/mach-pmcs-msp71xx \
+ -mno-branch-likely
+load-$(CONFIG_PMC_MSP) += 0xffffffff80100000
diff --git a/arch/mips/pmcs-msp71xx/gpio.c b/arch/mips/pmcs-msp71xx/gpio.c
new file mode 100644
index 00000000000..aaccbe52438
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/gpio.c
@@ -0,0 +1,216 @@
+/*
+ * Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two
+ * types of registers. The data register sets the output level when in output
+ * mode and when in input mode will contain the value at the input. The config
+ * register sets the various modes for each gpio.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * @author Patrick Glass <patrickglass@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#define MSP71XX_CFG_OFFSET(gpio) (4 * (gpio))
+#define CONF_MASK 0x0F
+#define MSP71XX_GPIO_INPUT 0x01
+#define MSP71XX_GPIO_OUTPUT 0x08
+
+#define MSP71XX_GPIO_BASE 0x0B8400000L
+
+#define to_msp71xx_gpio_chip(c) container_of(c, struct msp71xx_gpio_chip, chip)
+
+static spinlock_t gpio_lock;
+
+/*
+ * struct msp71xx_gpio_chip - container for gpio chip and registers
+ * @chip: chip structure for the specified gpio bank
+ * @data_reg: register for reading and writing the gpio pin value
+ * @config_reg: register to set the mode for the gpio pin bank
+ * @out_drive_reg: register to set the output drive mode for the gpio pin bank
+ */
+struct msp71xx_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *data_reg;
+ void __iomem *config_reg;
+ void __iomem *out_drive_reg;
+};
+
+/*
+ * msp71xx_gpio_get() - return the chip's gpio value
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be returned
+ *
+ * It will return 0 if gpio value is low and other if high.
+ */
+static int msp71xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
+
+ return __raw_readl(msp_chip->data_reg) & (1 << offset);
+}
+
+/*
+ * msp71xx_gpio_set() - set the output value for the gpio
+ * @chip: chip structure who controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This will set the gpio bit specified to the desired value. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static void msp71xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
+ unsigned long flags;
+ u32 data;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ data = __raw_readl(msp_chip->data_reg);
+ if (value)
+ data |= (1 << offset);
+ else
+ data &= ~(1 << offset);
+ __raw_writel(data, msp_chip->data_reg);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
+/*
+ * msp71xx_set_gpio_mode() - declare the mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @mode: desired configuration for the gpio (see datasheet)
+ *
+ * It will set the gpio pin config to the @mode value passed in.
+ */
+static int msp71xx_set_gpio_mode(struct gpio_chip *chip,
+ unsigned offset, int mode)
+{
+ struct msp71xx_gpio_chip *msp_chip = to_msp71xx_gpio_chip(chip);
+ const unsigned bit_offset = MSP71XX_CFG_OFFSET(offset);
+ unsigned long flags;
+ u32 cfg;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ cfg = __raw_readl(msp_chip->config_reg);
+ cfg &= ~(CONF_MASK << bit_offset);
+ cfg |= (mode << bit_offset);
+ __raw_writel(cfg, msp_chip->config_reg);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ return 0;
+}
+
+/*
+ * msp71xx_direction_output() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This call will set the mode for the @gpio to output. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static int msp71xx_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ msp71xx_gpio_set(chip, offset, value);
+
+ return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_OUTPUT);
+}
+
+/*
+ * msp71xx_direction_input() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose to which the value will be assigned
+ *
+ * This call will set the mode for the @gpio to input.
+ */
+static int msp71xx_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return msp71xx_set_gpio_mode(chip, offset, MSP71XX_GPIO_INPUT);
+}
+
+/*
+ * msp71xx_set_output_drive() - declare the output drive for the gpio line
+ * @gpio: gpio pin whose output drive you wish to modify
+ * @value: zero for active drain 1 for open drain drive
+ *
+ * This call will set the output drive mode for the @gpio to output.
+ */
+int msp71xx_set_output_drive(unsigned gpio, int value)
+{
+ unsigned long flags;
+ u32 data;
+
+ if (gpio > 15 || gpio < 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ data = __raw_readl((void __iomem *)(MSP71XX_GPIO_BASE + 0x190));
+ if (value)
+ data |= (1 << gpio);
+ else
+ data &= ~(1 << gpio);
+ __raw_writel(data, (void __iomem *)(MSP71XX_GPIO_BASE + 0x190));
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(msp71xx_set_output_drive);
+
+#define MSP71XX_GPIO_BANK(name, dr, cr, base_gpio, num_gpio) \
+{ \
+ .chip = { \
+ .label = name, \
+ .direction_input = msp71xx_direction_input, \
+ .direction_output = msp71xx_direction_output, \
+ .get = msp71xx_gpio_get, \
+ .set = msp71xx_gpio_set, \
+ .base = base_gpio, \
+ .ngpio = num_gpio \
+ }, \
+ .data_reg = (void __iomem *)(MSP71XX_GPIO_BASE + dr), \
+ .config_reg = (void __iomem *)(MSP71XX_GPIO_BASE + cr), \
+ .out_drive_reg = (void __iomem *)(MSP71XX_GPIO_BASE + 0x190), \
+}
+
+/*
+ * struct msp71xx_gpio_banks[] - container array of gpio banks
+ * @chip: chip structure for the specified gpio bank
+ * @data_reg: register for reading and writing the gpio pin value
+ * @config_reg: register to set the mode for the gpio pin bank
+ *
+ * This array structure defines the gpio banks for the PMC MIPS Processor.
+ * We specify the bank name, the data register, the config register, base
+ * starting gpio number, and the number of gpios exposed by the bank.
+ */
+static struct msp71xx_gpio_chip msp71xx_gpio_banks[] = {
+
+ MSP71XX_GPIO_BANK("GPIO_1_0", 0x170, 0x180, 0, 2),
+ MSP71XX_GPIO_BANK("GPIO_5_2", 0x174, 0x184, 2, 4),
+ MSP71XX_GPIO_BANK("GPIO_9_6", 0x178, 0x188, 6, 4),
+ MSP71XX_GPIO_BANK("GPIO_15_10", 0x17C, 0x18C, 10, 6),
+};
+
+void __init msp71xx_init_gpio(void)
+{
+ int i;
+
+ spin_lock_init(&gpio_lock);
+
+ for (i = 0; i < ARRAY_SIZE(msp71xx_gpio_banks); i++)
+ gpiochip_add(&msp71xx_gpio_banks[i].chip);
+}
diff --git a/arch/mips/pmcs-msp71xx/gpio_extended.c b/arch/mips/pmcs-msp71xx/gpio_extended.c
new file mode 100644
index 00000000000..2a99f360fae
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/gpio_extended.c
@@ -0,0 +1,146 @@
+/*
+ * Generic PMC MSP71xx EXTENDED (EXD) GPIO handling. The extended gpio is
+ * a set of hardware registers that have no need for explicit locking as
+ * it is handled by unique method of writing individual set/clr bits.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * @author Patrick Glass <patrickglass@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#define MSP71XX_DATA_OFFSET(gpio) (2 * (gpio))
+#define MSP71XX_READ_OFFSET(gpio) (MSP71XX_DATA_OFFSET(gpio) + 1)
+#define MSP71XX_CFG_OUT_OFFSET(gpio) (MSP71XX_DATA_OFFSET(gpio) + 16)
+#define MSP71XX_CFG_IN_OFFSET(gpio) (MSP71XX_CFG_OUT_OFFSET(gpio) + 1)
+
+#define MSP71XX_EXD_GPIO_BASE 0x0BC000000L
+
+#define to_msp71xx_exd_gpio_chip(c) \
+ container_of(c, struct msp71xx_exd_gpio_chip, chip)
+
+/*
+ * struct msp71xx_exd_gpio_chip - container for gpio chip and registers
+ * @chip: chip structure for the specified gpio bank
+ * @reg: register for control and data of gpio pin
+ */
+struct msp71xx_exd_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *reg;
+};
+
+/*
+ * msp71xx_exd_gpio_get() - return the chip's gpio value
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be returned
+ *
+ * It will return 0 if gpio value is low and other if high.
+ */
+static int msp71xx_exd_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct msp71xx_exd_gpio_chip *msp71xx_chip =
+ to_msp71xx_exd_gpio_chip(chip);
+ const unsigned bit = MSP71XX_READ_OFFSET(offset);
+
+ return __raw_readl(msp71xx_chip->reg) & (1 << bit);
+}
+
+/*
+ * msp71xx_exd_gpio_set() - set the output value for the gpio
+ * @chip: chip structure who controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This will set the gpio bit specified to the desired value. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static void msp71xx_exd_gpio_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct msp71xx_exd_gpio_chip *msp71xx_chip =
+ to_msp71xx_exd_gpio_chip(chip);
+ const unsigned bit = MSP71XX_DATA_OFFSET(offset);
+
+ __raw_writel(1 << (bit + (value ? 1 : 0)), msp71xx_chip->reg);
+}
+
+/*
+ * msp71xx_exd_direction_output() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose value will be assigned
+ * @value: logic level to assign to the gpio initially
+ *
+ * This call will set the mode for the @gpio to output. It will set the
+ * gpio pin low if value is 0 otherwise it will be high.
+ */
+static int msp71xx_exd_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct msp71xx_exd_gpio_chip *msp71xx_chip =
+ to_msp71xx_exd_gpio_chip(chip);
+
+ msp71xx_exd_gpio_set(chip, offset, value);
+ __raw_writel(1 << MSP71XX_CFG_OUT_OFFSET(offset), msp71xx_chip->reg);
+ return 0;
+}
+
+/*
+ * msp71xx_exd_direction_input() - declare the direction mode for a gpio
+ * @chip: chip structure which controls the specified gpio
+ * @offset: gpio whose to which the value will be assigned
+ *
+ * This call will set the mode for the @gpio to input.
+ */
+static int msp71xx_exd_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct msp71xx_exd_gpio_chip *msp71xx_chip =
+ to_msp71xx_exd_gpio_chip(chip);
+
+ __raw_writel(1 << MSP71XX_CFG_IN_OFFSET(offset), msp71xx_chip->reg);
+ return 0;
+}
+
+#define MSP71XX_EXD_GPIO_BANK(name, exd_reg, base_gpio, num_gpio) \
+{ \
+ .chip = { \
+ .label = name, \
+ .direction_input = msp71xx_exd_direction_input, \
+ .direction_output = msp71xx_exd_direction_output, \
+ .get = msp71xx_exd_gpio_get, \
+ .set = msp71xx_exd_gpio_set, \
+ .base = base_gpio, \
+ .ngpio = num_gpio, \
+ }, \
+ .reg = (void __iomem *)(MSP71XX_EXD_GPIO_BASE + exd_reg), \
+}
+
+/*
+ * struct msp71xx_exd_gpio_banks[] - container array of gpio banks
+ * @chip: chip structure for the specified gpio bank
+ * @reg: register for reading and writing the gpio pin value
+ *
+ * This array structure defines the extended gpio banks for the
+ * PMC MIPS Processor. We specify the bank name, the data/config
+ * register,the base starting gpio number, and the number of
+ * gpios exposed by the bank of gpios.
+ */
+static struct msp71xx_exd_gpio_chip msp71xx_exd_gpio_banks[] = {
+
+ MSP71XX_EXD_GPIO_BANK("GPIO_23_16", 0x188, 16, 8),
+ MSP71XX_EXD_GPIO_BANK("GPIO_27_24", 0x18C, 24, 4),
+};
+
+void __init msp71xx_init_gpio_extended(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(msp71xx_exd_gpio_banks); i++)
+ gpiochip_add(&msp71xx_exd_gpio_banks[i].chip);
+}
diff --git a/arch/mips/pmcs-msp71xx/msp_elb.c b/arch/mips/pmcs-msp71xx/msp_elb.c
new file mode 100644
index 00000000000..3e964100721
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_elb.c
@@ -0,0 +1,46 @@
+/*
+ * Sets up the proper Chip Select configuration registers. It is assumed that
+ * PMON sets up the ADDR and MASK registers properly.
+ *
+ * Copyright 2005-2006 PMC-Sierra, Inc.
+ * Author: Marc St-Jean, Marc_St-Jean@pmc-sierra.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <msp_regs.h>
+
+static int __init msp_elb_setup(void)
+{
+#if defined(CONFIG_PMC_MSP7120_GW) \
+ || defined(CONFIG_PMC_MSP7120_EVAL)
+ /*
+ * Force all CNFG to be identical and equal to CS0,
+ * according to OPS doc
+ */
+ *CS1_CNFG_REG = *CS2_CNFG_REG = *CS3_CNFG_REG = *CS0_CNFG_REG;
+#endif
+ return 0;
+}
+
+subsys_initcall(msp_elb_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_eth.c b/arch/mips/pmcs-msp71xx/msp_eth.c
new file mode 100644
index 00000000000..c584df393de
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_eth.c
@@ -0,0 +1,187 @@
+/*
+ * The setup file for ethernet related hardware on PMC-Sierra MSP processors.
+ *
+ * Copyright 2010 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <msp_regs.h>
+#include <msp_int.h>
+#include <msp_gpio_macros.h>
+
+
+#define MSP_ETHERNET_GPIO0 14
+#define MSP_ETHERNET_GPIO1 15
+#define MSP_ETHERNET_GPIO2 16
+
+#ifdef CONFIG_MSP_HAS_TSMAC
+#define MSP_TSMAC_SIZE 0x10020
+#define MSP_TSMAC_ID "pmc_tsmac"
+
+static struct resource msp_tsmac0_resources[] = {
+ [0] = {
+ .start = MSP_MAC0_BASE,
+ .end = MSP_MAC0_BASE + MSP_TSMAC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_MAC0,
+ .end = MSP_INT_MAC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msp_tsmac1_resources[] = {
+ [0] = {
+ .start = MSP_MAC1_BASE,
+ .end = MSP_MAC1_BASE + MSP_TSMAC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_MAC1,
+ .end = MSP_INT_MAC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+static struct resource msp_tsmac2_resources[] = {
+ [0] = {
+ .start = MSP_MAC2_BASE,
+ .end = MSP_MAC2_BASE + MSP_TSMAC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_SAR,
+ .end = MSP_INT_SAR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static struct platform_device tsmac_device[] = {
+ [0] = {
+ .name = MSP_TSMAC_ID,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(msp_tsmac0_resources),
+ .resource = msp_tsmac0_resources,
+ },
+ [1] = {
+ .name = MSP_TSMAC_ID,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(msp_tsmac1_resources),
+ .resource = msp_tsmac1_resources,
+ },
+ [2] = {
+ .name = MSP_TSMAC_ID,
+ .id = 2,
+ .num_resources = ARRAY_SIZE(msp_tsmac2_resources),
+ .resource = msp_tsmac2_resources,
+ },
+};
+#define msp_eth_devs tsmac_device
+
+#else
+/* If it is not TSMAC assume MSP_ETH (100Mbps) */
+#define MSP_ETH_ID "pmc_mspeth"
+#define MSP_ETH_SIZE 0xE0
+static struct resource msp_eth0_resources[] = {
+ [0] = {
+ .start = MSP_MAC0_BASE,
+ .end = MSP_MAC0_BASE + MSP_ETH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_MAC0,
+ .end = MSP_INT_MAC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msp_eth1_resources[] = {
+ [0] = {
+ .start = MSP_MAC1_BASE,
+ .end = MSP_MAC1_BASE + MSP_ETH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_MAC1,
+ .end = MSP_INT_MAC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+
+static struct platform_device mspeth_device[] = {
+ [0] = {
+ .name = MSP_ETH_ID,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(msp_eth0_resources),
+ .resource = msp_eth0_resources,
+ },
+ [1] = {
+ .name = MSP_ETH_ID,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(msp_eth1_resources),
+ .resource = msp_eth1_resources,
+ },
+
+};
+#define msp_eth_devs mspeth_device
+
+#endif
+int __init msp_eth_setup(void)
+{
+ int i, ret = 0;
+
+ /* Configure the GPIO and take the ethernet PHY out of reset */
+ msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0);
+ msp_gpio_pin_hi(MSP_ETHERNET_GPIO0);
+
+#ifdef CONFIG_MSP_HAS_TSMAC
+ /* 3 phys on boards with TSMAC */
+ msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO1);
+ msp_gpio_pin_hi(MSP_ETHERNET_GPIO1);
+
+ msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO2);
+ msp_gpio_pin_hi(MSP_ETHERNET_GPIO2);
+#endif
+ for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) {
+ ret = platform_device_register(&msp_eth_devs[i]);
+ printk(KERN_INFO "device: %d, return value = %d\n", i, ret);
+ if (ret) {
+ platform_device_unregister(&msp_eth_devs[i]);
+ break;
+ }
+ }
+
+ if (ret)
+ printk(KERN_WARNING "Could not initialize "
+ "MSPETH device structures.\n");
+
+ return ret;
+}
+subsys_initcall(msp_eth_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_hwbutton.c b/arch/mips/pmcs-msp71xx/msp_hwbutton.c
new file mode 100644
index 00000000000..bb57ed9ea2b
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_hwbutton.c
@@ -0,0 +1,165 @@
+/*
+ * Sets up interrupt handlers for various hardware switches which are
+ * connected to interrupt lines.
+ *
+ * Copyright 2005-2207 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+#include <msp_int.h>
+#include <msp_regs.h>
+#include <msp_regops.h>
+
+/* For hwbutton_interrupt->initial_state */
+#define HWBUTTON_HI 0x1
+#define HWBUTTON_LO 0x2
+
+/*
+ * This struct describes a hardware button
+ */
+struct hwbutton_interrupt {
+ char *name; /* Name of button */
+ int irq; /* Actual LINUX IRQ */
+ int eirq; /* Extended IRQ number (0-7) */
+ int initial_state; /* The "normal" state of the switch */
+ void (*handle_hi)(void *); /* Handler: switch input has gone HI */
+ void (*handle_lo)(void *); /* Handler: switch input has gone LO */
+ void *data; /* Optional data to pass to handler */
+};
+
+#ifdef CONFIG_PMC_MSP7120_GW
+extern void msp_restart(char *);
+
+static void softreset_push(void *data)
+{
+ printk(KERN_WARNING "SOFTRESET switch was pushed\n");
+
+ /*
+ * In the future you could move this to the release handler,
+ * timing the difference between the 'push' and 'release', and only
+ * doing this ungraceful restart if the button has been down for
+ * a certain amount of time; otherwise doing a graceful restart.
+ */
+
+ msp_restart(NULL);
+}
+
+static void softreset_release(void *data)
+{
+ printk(KERN_WARNING "SOFTRESET switch was released\n");
+
+ /* Do nothing */
+}
+
+static void standby_on(void *data)
+{
+ printk(KERN_WARNING "STANDBY switch was set to ON (not implemented)\n");
+
+ /* TODO: Put board in standby mode */
+}
+
+static void standby_off(void *data)
+{
+ printk(KERN_WARNING
+ "STANDBY switch was set to OFF (not implemented)\n");
+
+ /* TODO: Take out of standby mode */
+}
+
+static struct hwbutton_interrupt softreset_sw = {
+ .name = "Softreset button",
+ .irq = MSP_INT_EXT0,
+ .eirq = 0,
+ .initial_state = HWBUTTON_HI,
+ .handle_hi = softreset_release,
+ .handle_lo = softreset_push,
+ .data = NULL,
+};
+
+static struct hwbutton_interrupt standby_sw = {
+ .name = "Standby switch",
+ .irq = MSP_INT_EXT1,
+ .eirq = 1,
+ .initial_state = HWBUTTON_HI,
+ .handle_hi = standby_off,
+ .handle_lo = standby_on,
+ .data = NULL,
+};
+#endif /* CONFIG_PMC_MSP7120_GW */
+
+static irqreturn_t hwbutton_handler(int irq, void *data)
+{
+ struct hwbutton_interrupt *hirq = data;
+ unsigned long cic_ext = *CIC_EXT_CFG_REG;
+
+ if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) {
+ /* Interrupt: pin is now HI */
+ CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
+ hirq->handle_hi(hirq->data);
+ } else {
+ /* Interrupt: pin is now LO */
+ CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
+ hirq->handle_lo(hirq->data);
+ }
+
+ /*
+ * Invert the POLARITY of this level interrupt to ack the interrupt
+ * Thus next state change will invoke the opposite message
+ */
+ *CIC_EXT_CFG_REG = cic_ext;
+
+ return IRQ_HANDLED;
+}
+
+static int msp_hwbutton_register(struct hwbutton_interrupt *hirq)
+{
+ unsigned long cic_ext;
+
+ if (hirq->handle_hi == NULL || hirq->handle_lo == NULL)
+ return -EINVAL;
+
+ cic_ext = *CIC_EXT_CFG_REG;
+ CIC_EXT_SET_TRIGGER_LEVEL(cic_ext, hirq->eirq);
+ if (hirq->initial_state == HWBUTTON_HI)
+ CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
+ else
+ CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
+ *CIC_EXT_CFG_REG = cic_ext;
+
+ return request_irq(hirq->irq, hwbutton_handler, 0,
+ hirq->name, hirq);
+}
+
+static int __init msp_hwbutton_setup(void)
+{
+#ifdef CONFIG_PMC_MSP7120_GW
+ msp_hwbutton_register(&softreset_sw);
+ msp_hwbutton_register(&standby_sw);
+#endif
+ return 0;
+}
+
+subsys_initcall(msp_hwbutton_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c
new file mode 100644
index 00000000000..9da5619c00a
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_irq.c
@@ -0,0 +1,164 @@
+/*
+ * IRQ vector handles
+ *
+ * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/time.h>
+
+#include <asm/irq_cpu.h>
+
+#include <msp_int.h>
+
+/* SLP bases systems */
+extern void msp_slp_irq_init(void);
+extern void msp_slp_irq_dispatch(void);
+
+/* CIC based systems */
+extern void msp_cic_irq_init(void);
+extern void msp_cic_irq_dispatch(void);
+
+/* VSMP support init */
+extern void msp_vsmp_int_init(void);
+
+/* vectored interrupt implementation */
+
+/* SW0/1 interrupts are used for SMP/SMTC */
+static inline void mac0_int_dispatch(void) { do_IRQ(MSP_INT_MAC0); }
+static inline void mac1_int_dispatch(void) { do_IRQ(MSP_INT_MAC1); }
+static inline void mac2_int_dispatch(void) { do_IRQ(MSP_INT_SAR); }
+static inline void usb_int_dispatch(void) { do_IRQ(MSP_INT_USB); }
+static inline void sec_int_dispatch(void) { do_IRQ(MSP_INT_SEC); }
+
+/*
+ * The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded
+ * hierarchical system. The first level are the direct MIPS interrupts
+ * and are assigned the interrupt range 0-7. The second level is the SLM
+ * interrupt controller and is assigned the range 8-39. The third level
+ * comprises the Peripherial block, the PCI block, the PCI MSI block and
+ * the SLP. The PCI interrupts and the SLP errors are handled by the
+ * relevant subsystems so the core interrupt code needs only concern
+ * itself with the Peripheral block. These are assigned interrupts in
+ * the range 40-71.
+ */
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+ u32 pending;
+
+ pending = read_c0_status() & read_c0_cause();
+
+ /*
+ * jump to the correct interrupt routine
+ * These are arranged in priority order and the timer
+ * comes first!
+ */
+
+#ifdef CONFIG_IRQ_MSP_CIC /* break out the CIC stuff for now */
+ if (pending & C_IRQ4) /* do the peripherals first, that's the timer */
+ msp_cic_irq_dispatch();
+
+ else if (pending & C_IRQ0)
+ do_IRQ(MSP_INT_MAC0);
+
+ else if (pending & C_IRQ1)
+ do_IRQ(MSP_INT_MAC1);
+
+ else if (pending & C_IRQ2)
+ do_IRQ(MSP_INT_USB);
+
+ else if (pending & C_IRQ3)
+ do_IRQ(MSP_INT_SAR);
+
+ else if (pending & C_IRQ5)
+ do_IRQ(MSP_INT_SEC);
+
+#else
+ if (pending & C_IRQ5)
+ do_IRQ(MSP_INT_TIMER);
+
+ else if (pending & C_IRQ0)
+ do_IRQ(MSP_INT_MAC0);
+
+ else if (pending & C_IRQ1)
+ do_IRQ(MSP_INT_MAC1);
+
+ else if (pending & C_IRQ3)
+ do_IRQ(MSP_INT_VE);
+
+ else if (pending & C_IRQ4)
+ msp_slp_irq_dispatch();
+#endif
+
+ else if (pending & C_SW0) /* do software after hardware */
+ do_IRQ(MSP_INT_SW0);
+
+ else if (pending & C_SW1)
+ do_IRQ(MSP_INT_SW1);
+}
+
+static struct irqaction cic_cascade_msp = {
+ .handler = no_action,
+ .name = "MSP CIC cascade",
+ .flags = IRQF_NO_THREAD,
+};
+
+static struct irqaction per_cascade_msp = {
+ .handler = no_action,
+ .name = "MSP PER cascade",
+ .flags = IRQF_NO_THREAD,
+};
+
+void __init arch_init_irq(void)
+{
+ /* assume we'll be using vectored interrupt mode except in UP mode*/
+#ifdef CONFIG_MIPS_MT
+ BUG_ON(!cpu_has_vint);
+#endif
+ /* initialize the 1st-level CPU based interrupt controller */
+ mips_cpu_irq_init();
+
+#ifdef CONFIG_IRQ_MSP_CIC
+ msp_cic_irq_init();
+#ifdef CONFIG_MIPS_MT
+ set_vi_handler(MSP_INT_CIC, msp_cic_irq_dispatch);
+ set_vi_handler(MSP_INT_MAC0, mac0_int_dispatch);
+ set_vi_handler(MSP_INT_MAC1, mac1_int_dispatch);
+ set_vi_handler(MSP_INT_SAR, mac2_int_dispatch);
+ set_vi_handler(MSP_INT_USB, usb_int_dispatch);
+ set_vi_handler(MSP_INT_SEC, sec_int_dispatch);
+#ifdef CONFIG_MIPS_MT_SMP
+ msp_vsmp_int_init();
+#elif defined CONFIG_MIPS_MT_SMTC
+ /*Set hwmask for all platform devices */
+ irq_hwmask[MSP_INT_MAC0] = C_IRQ0;
+ irq_hwmask[MSP_INT_MAC1] = C_IRQ1;
+ irq_hwmask[MSP_INT_USB] = C_IRQ2;
+ irq_hwmask[MSP_INT_SAR] = C_IRQ3;
+ irq_hwmask[MSP_INT_SEC] = C_IRQ5;
+
+#endif /* CONFIG_MIPS_MT_SMP */
+#endif /* CONFIG_MIPS_MT */
+ /* setup the cascaded interrupts */
+ setup_irq(MSP_INT_CIC, &cic_cascade_msp);
+ setup_irq(MSP_INT_PER, &per_cascade_msp);
+
+#else
+ /* setup the 2nd-level SLP register based interrupt controller */
+ /* VSMP /SMTC support support is not enabled for SLP */
+ msp_slp_irq_init();
+
+ /* setup the cascaded SLP/PER interrupts */
+ setup_irq(MSP_INT_SLP, &cic_cascade_msp);
+ setup_irq(MSP_INT_PER, &per_cascade_msp);
+#endif
+}
diff --git a/arch/mips/pmcs-msp71xx/msp_irq_cic.c b/arch/mips/pmcs-msp71xx/msp_irq_cic.c
new file mode 100644
index 00000000000..e49b499f66d
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_irq_cic.c
@@ -0,0 +1,216 @@
+/*
+ * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
+ *
+ * This file define the irq handler for MSP CIC subsystem interrupts.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+
+#include <asm/mipsregs.h>
+
+#include <msp_cic_int.h>
+#include <msp_regs.h>
+
+/*
+ * External API
+ */
+extern void msp_per_irq_init(void);
+extern void msp_per_irq_dispatch(void);
+
+
+/*
+ * Convenience Macro. Should be somewhere generic.
+ */
+#define get_current_vpe() \
+ ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
+
+#ifdef CONFIG_SMP
+
+#define LOCK_VPE(flags, mtflags) \
+do { \
+ local_irq_save(flags); \
+ mtflags = dmt(); \
+} while (0)
+
+#define UNLOCK_VPE(flags, mtflags) \
+do { \
+ emt(mtflags); \
+ local_irq_restore(flags);\
+} while (0)
+
+#define LOCK_CORE(flags, mtflags) \
+do { \
+ local_irq_save(flags); \
+ mtflags = dvpe(); \
+} while (0)
+
+#define UNLOCK_CORE(flags, mtflags) \
+do { \
+ evpe(mtflags); \
+ local_irq_restore(flags);\
+} while (0)
+
+#else
+
+#define LOCK_VPE(flags, mtflags)
+#define UNLOCK_VPE(flags, mtflags)
+#endif
+
+/* ensure writes to cic are completed */
+static inline void cic_wmb(void)
+{
+ const volatile void __iomem *cic_mem = CIC_VPE0_MSK_REG;
+ volatile u32 dummy_read;
+
+ wmb();
+ dummy_read = __raw_readl(cic_mem);
+ dummy_read++;
+}
+
+static void unmask_cic_irq(struct irq_data *d)
+{
+ volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG;
+ int vpe;
+#ifdef CONFIG_SMP
+ unsigned int mtflags;
+ unsigned long flags;
+
+ /*
+ * Make sure we have IRQ affinity. It may have changed while
+ * we were processing the IRQ.
+ */
+ if (!cpumask_test_cpu(smp_processor_id(), d->affinity))
+ return;
+#endif
+
+ vpe = get_current_vpe();
+ LOCK_VPE(flags, mtflags);
+ cic_msk_reg[vpe] |= (1 << (d->irq - MSP_CIC_INTBASE));
+ UNLOCK_VPE(flags, mtflags);
+ cic_wmb();
+}
+
+static void mask_cic_irq(struct irq_data *d)
+{
+ volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG;
+ int vpe = get_current_vpe();
+#ifdef CONFIG_SMP
+ unsigned long flags, mtflags;
+#endif
+ LOCK_VPE(flags, mtflags);
+ cic_msk_reg[vpe] &= ~(1 << (d->irq - MSP_CIC_INTBASE));
+ UNLOCK_VPE(flags, mtflags);
+ cic_wmb();
+}
+static void msp_cic_irq_ack(struct irq_data *d)
+{
+ mask_cic_irq(d);
+ /*
+ * Only really necessary for 18, 16-14 and sometimes 3:0
+ * (since these can be edge sensitive) but it doesn't
+ * hurt for the others
+ */
+ *CIC_STS_REG = (1 << (d->irq - MSP_CIC_INTBASE));
+ smtc_im_ack_irq(d->irq);
+}
+
+/*Note: Limiting to VSMP . Not tested in SMTC */
+
+#ifdef CONFIG_MIPS_MT_SMP
+static int msp_cic_irq_set_affinity(struct irq_data *d,
+ const struct cpumask *cpumask, bool force)
+{
+ int cpu;
+ unsigned long flags;
+ unsigned int mtflags;
+ unsigned long imask = (1 << (irq - MSP_CIC_INTBASE));
+ volatile u32 *cic_mask = (volatile u32 *)CIC_VPE0_MSK_REG;
+
+ /* timer balancing should be disabled in kernel code */
+ BUG_ON(irq == MSP_INT_VPE0_TIMER || irq == MSP_INT_VPE1_TIMER);
+
+ LOCK_CORE(flags, mtflags);
+ /* enable if any of each VPE's TCs require this IRQ */
+ for_each_online_cpu(cpu) {
+ if (cpumask_test_cpu(cpu, cpumask))
+ cic_mask[cpu] |= imask;
+ else
+ cic_mask[cpu] &= ~imask;
+
+ }
+
+ UNLOCK_CORE(flags, mtflags);
+ return 0;
+
+}
+#endif
+
+static struct irq_chip msp_cic_irq_controller = {
+ .name = "MSP_CIC",
+ .irq_mask = mask_cic_irq,
+ .irq_mask_ack = msp_cic_irq_ack,
+ .irq_unmask = unmask_cic_irq,
+ .irq_ack = msp_cic_irq_ack,
+#ifdef CONFIG_MIPS_MT_SMP
+ .irq_set_affinity = msp_cic_irq_set_affinity,
+#endif
+};
+
+void __init msp_cic_irq_init(void)
+{
+ int i;
+ /* Mask/clear interrupts. */
+ *CIC_VPE0_MSK_REG = 0x00000000;
+ *CIC_VPE1_MSK_REG = 0x00000000;
+ *CIC_STS_REG = 0xFFFFFFFF;
+ /*
+ * The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI.
+ * These inputs map to EXT_INT_POL[6:4] inside the CIC.
+ * They are to be active low, level sensitive.
+ */
+ *CIC_EXT_CFG_REG &= 0xFFFF8F8F;
+
+ /* initialize all the IRQ descriptors */
+ for (i = MSP_CIC_INTBASE ; i < MSP_CIC_INTBASE + 32 ; i++) {
+ irq_set_chip_and_handler(i, &msp_cic_irq_controller,
+ handle_level_irq);
+#ifdef CONFIG_MIPS_MT_SMTC
+ /* Mask of CIC interrupt */
+ irq_hwmask[i] = C_IRQ4;
+#endif
+ }
+
+ /* Initialize the PER interrupt sub-system */
+ msp_per_irq_init();
+}
+
+/* CIC masked by CIC vector processing before dispatch called */
+void msp_cic_irq_dispatch(void)
+{
+ volatile u32 *cic_msk_reg = (volatile u32 *)CIC_VPE0_MSK_REG;
+ u32 cic_mask;
+ u32 pending;
+ int cic_status = *CIC_STS_REG;
+ cic_mask = cic_msk_reg[get_current_vpe()];
+ pending = cic_status & cic_mask;
+ if (pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE))) {
+ do_IRQ(MSP_INT_VPE0_TIMER);
+ } else if (pending & (1 << (MSP_INT_VPE1_TIMER - MSP_CIC_INTBASE))) {
+ do_IRQ(MSP_INT_VPE1_TIMER);
+ } else if (pending & (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) {
+ msp_per_irq_dispatch();
+ } else if (pending) {
+ do_IRQ(ffs(pending) + MSP_CIC_INTBASE - 1);
+ } else{
+ spurious_interrupt();
+ }
+}
diff --git a/arch/mips/pmcs-msp71xx/msp_irq_per.c b/arch/mips/pmcs-msp71xx/msp_irq_per.c
new file mode 100644
index 00000000000..d1fd530479d
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_irq_per.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
+ *
+ * This file define the irq handler for MSP PER subsystem interrupts.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+
+#include <asm/mipsregs.h>
+
+#include <msp_cic_int.h>
+#include <msp_regs.h>
+
+
+/*
+ * Convenience Macro. Should be somewhere generic.
+ */
+#define get_current_vpe() \
+ ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
+
+#ifdef CONFIG_SMP
+/*
+ * The PER registers must be protected from concurrent access.
+ */
+
+static DEFINE_SPINLOCK(per_lock);
+#endif
+
+/* ensure writes to per are completed */
+
+static inline void per_wmb(void)
+{
+ const volatile void __iomem *per_mem = PER_INT_MSK_REG;
+ volatile u32 dummy_read;
+
+ wmb();
+ dummy_read = __raw_readl(per_mem);
+ dummy_read++;
+}
+
+static inline void unmask_per_irq(struct irq_data *d)
+{
+#ifdef CONFIG_SMP
+ unsigned long flags;
+ spin_lock_irqsave(&per_lock, flags);
+ *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
+ spin_unlock_irqrestore(&per_lock, flags);
+#else
+ *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
+#endif
+ per_wmb();
+}
+
+static inline void mask_per_irq(struct irq_data *d)
+{
+#ifdef CONFIG_SMP
+ unsigned long flags;
+ spin_lock_irqsave(&per_lock, flags);
+ *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
+ spin_unlock_irqrestore(&per_lock, flags);
+#else
+ *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
+#endif
+ per_wmb();
+}
+
+static inline void msp_per_irq_ack(struct irq_data *d)
+{
+ mask_per_irq(d);
+ /*
+ * In the PER interrupt controller, only bits 11 and 10
+ * are write-to-clear, (SPI TX complete, SPI RX complete).
+ * It does nothing for any others.
+ */
+ *PER_INT_STS_REG = (1 << (d->irq - MSP_PER_INTBASE));
+}
+
+#ifdef CONFIG_SMP
+static int msp_per_irq_set_affinity(struct irq_data *d,
+ const struct cpumask *affinity, bool force)
+{
+ /* WTF is this doing ????? */
+ unmask_per_irq(d);
+ return 0;
+}
+#endif
+
+static struct irq_chip msp_per_irq_controller = {
+ .name = "MSP_PER",
+ .irq_enable = unmask_per_irq,
+ .irq_disable = mask_per_irq,
+ .irq_ack = msp_per_irq_ack,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = msp_per_irq_set_affinity,
+#endif
+};
+
+void __init msp_per_irq_init(void)
+{
+ int i;
+ /* Mask/clear interrupts. */
+ *PER_INT_MSK_REG = 0x00000000;
+ *PER_INT_STS_REG = 0xFFFFFFFF;
+ /* initialize all the IRQ descriptors */
+ for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) {
+ irq_set_chip(i, &msp_per_irq_controller);
+#ifdef CONFIG_MIPS_MT_SMTC
+ irq_hwmask[i] = C_IRQ4;
+#endif
+ }
+}
+
+void msp_per_irq_dispatch(void)
+{
+ u32 per_mask = *PER_INT_MSK_REG;
+ u32 per_status = *PER_INT_STS_REG;
+ u32 pending;
+
+ pending = per_status & per_mask;
+ if (pending) {
+ do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1);
+ } else {
+ spurious_interrupt();
+ }
+}
diff --git a/arch/mips/pmcs-msp71xx/msp_irq_slp.c b/arch/mips/pmcs-msp71xx/msp_irq_slp.c
new file mode 100644
index 00000000000..5f66a76311c
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_irq_slp.c
@@ -0,0 +1,106 @@
+/*
+ * This file define the irq handler for MSP SLM subsystem interrupts.
+ *
+ * Copyright 2005-2006 PMC-Sierra, Inc, derived from irq_cpu.c
+ * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+
+#include <asm/mipsregs.h>
+
+#include <msp_slp_int.h>
+#include <msp_regs.h>
+
+static inline void unmask_msp_slp_irq(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ /* check for PER interrupt range */
+ if (irq < MSP_PER_INTBASE)
+ *SLP_INT_MSK_REG |= (1 << (irq - MSP_SLP_INTBASE));
+ else
+ *PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE));
+}
+
+static inline void mask_msp_slp_irq(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ /* check for PER interrupt range */
+ if (irq < MSP_PER_INTBASE)
+ *SLP_INT_MSK_REG &= ~(1 << (irq - MSP_SLP_INTBASE));
+ else
+ *PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE));
+}
+
+/*
+ * While we ack the interrupt interrupts are disabled and thus we don't need
+ * to deal with concurrency issues. Same for msp_slp_irq_end.
+ */
+static inline void ack_msp_slp_irq(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ /* check for PER interrupt range */
+ if (irq < MSP_PER_INTBASE)
+ *SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE));
+ else
+ *PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE));
+}
+
+static struct irq_chip msp_slp_irq_controller = {
+ .name = "MSP_SLP",
+ .irq_ack = ack_msp_slp_irq,
+ .irq_mask = mask_msp_slp_irq,
+ .irq_unmask = unmask_msp_slp_irq,
+};
+
+void __init msp_slp_irq_init(void)
+{
+ int i;
+
+ /* Mask/clear interrupts. */
+ *SLP_INT_MSK_REG = 0x00000000;
+ *PER_INT_MSK_REG = 0x00000000;
+ *SLP_INT_STS_REG = 0xFFFFFFFF;
+ *PER_INT_STS_REG = 0xFFFFFFFF;
+
+ /* initialize all the IRQ descriptors */
+ for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++)
+ irq_set_chip_and_handler(i, &msp_slp_irq_controller,
+ handle_level_irq);
+}
+
+void msp_slp_irq_dispatch(void)
+{
+ u32 pending;
+ int intbase;
+
+ intbase = MSP_SLP_INTBASE;
+ pending = *SLP_INT_STS_REG & *SLP_INT_MSK_REG;
+
+ /* check for PER interrupt */
+ if (pending == (1 << (MSP_INT_PER - MSP_SLP_INTBASE))) {
+ intbase = MSP_PER_INTBASE;
+ pending = *PER_INT_STS_REG & *PER_INT_MSK_REG;
+ }
+
+ /* check for spurious interrupt */
+ if (pending == 0x00000000) {
+ printk(KERN_ERR "Spurious %s interrupt?\n",
+ (intbase == MSP_SLP_INTBASE) ? "SLP" : "PER");
+ return;
+ }
+
+ /* dispatch the irq */
+ do_IRQ(ffs(pending) + intbase - 1);
+}
diff --git a/arch/mips/pmcs-msp71xx/msp_pci.c b/arch/mips/pmcs-msp71xx/msp_pci.c
new file mode 100644
index 00000000000..428dea23c35
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_pci.c
@@ -0,0 +1,50 @@
+/*
+ * The setup file for PCI related hardware on PMC-Sierra MSP processors.
+ *
+ * Copyright 2005-2006 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+
+#include <msp_prom.h>
+#include <msp_regs.h>
+
+extern void msp_pci_init(void);
+
+static int __init msp_pci_setup(void)
+{
+#if 0 /* Linux 2.6 initialization code to be completed */
+ if (getdeviceid() & DEV_ID_SINGLE_PC) {
+ /* If single card mode */
+ slmRegs *sreg = (slmRegs *) SREG_BASE;
+
+ sreg->single_pc_enable = SINGLE_PCCARD;
+ }
+#endif
+
+ msp_pci_init();
+
+ return 0;
+}
+
+subsys_initcall(msp_pci_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c
new file mode 100644
index 00000000000..0edb89a6351
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_prom.c
@@ -0,0 +1,503 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * PROM library initialisation code, assuming a version of
+ * pmon is the boot code.
+ *
+ * Copyright 2000,2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * This file was derived from Carsten Langgaard's
+ * arch/mips/mips-boards/xx files.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm-generic/sections.h>
+#include <asm/page.h>
+
+#include <msp_prom.h>
+#include <msp_regs.h>
+
+/* global PROM environment variables and pointers */
+int prom_argc;
+char **prom_argv, **prom_envp;
+int *prom_vec;
+
+/* debug flag */
+int init_debug = 1;
+
+/* memory blocks */
+struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+/* default feature sets */
+static char msp_default_features[] =
+#if defined(CONFIG_PMC_MSP4200_EVAL) \
+ || defined(CONFIG_PMC_MSP4200_GW)
+ "ERER";
+#elif defined(CONFIG_PMC_MSP7120_EVAL) \
+ || defined(CONFIG_PMC_MSP7120_GW)
+ "EMEMSP";
+#elif defined(CONFIG_PMC_MSP7120_FPGA)
+ "EMEM";
+#endif
+
+/* conversion functions */
+static inline unsigned char str2hexnum(unsigned char c)
+{
+ if (c >= '0' && c <= '9')
+ return c - '0';
+ if (c >= 'a' && c <= 'f')
+ return c - 'a' + 10;
+ return 0; /* foo */
+}
+
+static inline int str2eaddr(unsigned char *ea, unsigned char *str)
+{
+ int index = 0;
+ unsigned char num = 0;
+
+ while (*str != '\0') {
+ if ((*str == '.') || (*str == ':')) {
+ ea[index++] = num;
+ num = 0;
+ str++;
+ } else {
+ num = num << 4;
+ num |= str2hexnum(*str++);
+ }
+ }
+
+ if (index == 5) {
+ ea[index++] = num;
+ return 0;
+ } else
+ return -1;
+}
+EXPORT_SYMBOL(str2eaddr);
+
+static inline unsigned long str2hex(unsigned char *str)
+{
+ int value = 0;
+
+ while (*str) {
+ value = value << 4;
+ value |= str2hexnum(*str++);
+ }
+
+ return value;
+}
+
+/* function to query the system information */
+const char *get_system_type(void)
+{
+#if defined(CONFIG_PMC_MSP4200_EVAL)
+ return "PMC-Sierra MSP4200 Eval Board";
+#elif defined(CONFIG_PMC_MSP4200_GW)
+ return "PMC-Sierra MSP4200 VoIP Gateway";
+#elif defined(CONFIG_PMC_MSP7120_EVAL)
+ return "PMC-Sierra MSP7120 Eval Board";
+#elif defined(CONFIG_PMC_MSP7120_GW)
+ return "PMC-Sierra MSP7120 Residential Gateway";
+#elif defined(CONFIG_PMC_MSP7120_FPGA)
+ return "PMC-Sierra MSP7120 FPGA";
+#else
+ #error "What is the type of *your* MSP?"
+#endif
+}
+
+int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr)
+{
+ char *ethaddr_str;
+
+ ethaddr_str = prom_getenv(ethaddr_name);
+ if (!ethaddr_str) {
+ printk(KERN_WARNING "%s not set in boot prom\n", ethaddr_name);
+ return -1;
+ }
+
+ if (str2eaddr(ethernet_addr, ethaddr_str) == -1) {
+ printk(KERN_WARNING "%s badly formatted-<%s>\n",
+ ethaddr_name, ethaddr_str);
+ return -1;
+ }
+
+ if (init_debug > 1) {
+ int i;
+ printk(KERN_DEBUG "get_ethernet_addr: for %s ", ethaddr_name);
+ for (i = 0; i < 5; i++)
+ printk(KERN_DEBUG "%02x:",
+ (unsigned char)*(ethernet_addr+i));
+ printk(KERN_DEBUG "%02x\n", *(ethernet_addr+i));
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(get_ethernet_addr);
+
+static char *get_features(void)
+{
+ char *feature = prom_getenv(FEATURES);
+
+ if (feature == NULL) {
+ /* default features based on MACHINE_TYPE */
+ feature = msp_default_features;
+ }
+
+ return feature;
+}
+
+static char test_feature(char c)
+{
+ char *feature = get_features();
+
+ while (*feature) {
+ if (*feature++ == c)
+ return *feature;
+ feature++;
+ }
+
+ return FEATURE_NOEXIST;
+}
+
+unsigned long get_deviceid(void)
+{
+ char *deviceid = prom_getenv(DEVICEID);
+
+ if (deviceid == NULL)
+ return *DEV_ID_REG;
+ else
+ return str2hex(deviceid);
+}
+
+char identify_pci(void)
+{
+ return test_feature(PCI_KEY);
+}
+EXPORT_SYMBOL(identify_pci);
+
+char identify_pcimux(void)
+{
+ return test_feature(PCIMUX_KEY);
+}
+
+char identify_sec(void)
+{
+ return test_feature(SEC_KEY);
+}
+EXPORT_SYMBOL(identify_sec);
+
+char identify_spad(void)
+{
+ return test_feature(SPAD_KEY);
+}
+EXPORT_SYMBOL(identify_spad);
+
+char identify_tdm(void)
+{
+ return test_feature(TDM_KEY);
+}
+EXPORT_SYMBOL(identify_tdm);
+
+char identify_zsp(void)
+{
+ return test_feature(ZSP_KEY);
+}
+EXPORT_SYMBOL(identify_zsp);
+
+static char identify_enetfeature(char key, unsigned long interface_num)
+{
+ char *feature = get_features();
+
+ while (*feature) {
+ if (*feature++ == key && interface_num-- == 0)
+ return *feature;
+ feature++;
+ }
+
+ return FEATURE_NOEXIST;
+}
+
+char identify_enet(unsigned long interface_num)
+{
+ return identify_enetfeature(ENET_KEY, interface_num);
+}
+EXPORT_SYMBOL(identify_enet);
+
+char identify_enetTxD(unsigned long interface_num)
+{
+ return identify_enetfeature(ENETTXD_KEY, interface_num);
+}
+EXPORT_SYMBOL(identify_enetTxD);
+
+unsigned long identify_family(void)
+{
+ unsigned long deviceid;
+
+ deviceid = get_deviceid();
+
+ return deviceid & CPU_DEVID_FAMILY;
+}
+EXPORT_SYMBOL(identify_family);
+
+unsigned long identify_revision(void)
+{
+ unsigned long deviceid;
+
+ deviceid = get_deviceid();
+
+ return deviceid & CPU_DEVID_REVISION;
+}
+EXPORT_SYMBOL(identify_revision);
+
+/* PROM environment functions */
+char *prom_getenv(char *env_name)
+{
+ /*
+ * Return a pointer to the given environment variable. prom_envp
+ * points to a null terminated array of pointers to variables.
+ * Environment variables are stored in the form of "memsize=64"
+ */
+
+ char **var = prom_envp;
+ int i = strlen(env_name);
+
+ while (*var) {
+ if (strncmp(env_name, *var, i) == 0) {
+ return (*var + strlen(env_name) + 1);
+ }
+ var++;
+ }
+
+ return NULL;
+}
+
+/* PROM commandline functions */
+void __init prom_init_cmdline(void)
+{
+ char *cp;
+ int actr;
+
+ actr = 1; /* Always ignore argv[0] */
+
+ cp = &(arcs_cmdline[0]);
+ while (actr < prom_argc) {
+ strcpy(cp, prom_argv[actr]);
+ cp += strlen(prom_argv[actr]);
+ *cp++ = ' ';
+ actr++;
+ }
+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+ --cp;
+ *cp = '\0';
+}
+
+/* memory allocation functions */
+static int __init prom_memtype_classify(unsigned int type)
+{
+ switch (type) {
+ case yamon_free:
+ return BOOT_MEM_RAM;
+ case yamon_prom:
+ return BOOT_MEM_ROM_DATA;
+ default:
+ return BOOT_MEM_RESERVED;
+ }
+}
+
+void __init prom_meminit(void)
+{
+ struct prom_pmemblock *p;
+
+ p = prom_getmdesc();
+
+ while (p->size) {
+ long type;
+ unsigned long base, size;
+
+ type = prom_memtype_classify(p->type);
+ base = p->base;
+ size = p->size;
+
+ add_memory_region(base, size, type);
+ p++;
+ }
+}
+
+void __init prom_free_prom_memory(void)
+{
+ int argc;
+ char **argv;
+ char **envp;
+ char *ptr;
+ int len = 0;
+ int i;
+ unsigned long addr;
+
+ /*
+ * preserve environment variables and command line from pmon/bbload
+ * first preserve the command line
+ */
+ for (argc = 0; argc < prom_argc; argc++) {
+ len += sizeof(char *); /* length of pointer */
+ len += strlen(prom_argv[argc]) + 1; /* length of string */
+ }
+ len += sizeof(char *); /* plus length of null pointer */
+
+ argv = kmalloc(len, GFP_KERNEL);
+ ptr = (char *) &argv[prom_argc + 1]; /* strings follow array */
+
+ for (argc = 0; argc < prom_argc; argc++) {
+ argv[argc] = ptr;
+ strcpy(ptr, prom_argv[argc]);
+ ptr += strlen(prom_argv[argc]) + 1;
+ }
+ argv[prom_argc] = NULL; /* end array with null pointer */
+ prom_argv = argv;
+
+ /* next preserve the environment variables */
+ len = 0;
+ i = 0;
+ for (envp = prom_envp; *envp != NULL; envp++) {
+ i++; /* count number of environment variables */
+ len += sizeof(char *); /* length of pointer */
+ len += strlen(*envp) + 1; /* length of string */
+ }
+ len += sizeof(char *); /* plus length of null pointer */
+
+ envp = kmalloc(len, GFP_KERNEL);
+ ptr = (char *) &envp[i+1];
+
+ for (argc = 0; argc < i; argc++) {
+ envp[argc] = ptr;
+ strcpy(ptr, prom_envp[argc]);
+ ptr += strlen(prom_envp[argc]) + 1;
+ }
+ envp[i] = NULL; /* end array with null pointer */
+ prom_envp = envp;
+
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
+ continue;
+
+ addr = boot_mem_map.map[i].addr;
+ free_init_pages("prom memory",
+ addr, addr + boot_mem_map.map[i].size);
+ }
+}
+
+struct prom_pmemblock *__init prom_getmdesc(void)
+{
+ static char memsz_env[] __initdata = "memsize";
+ static char heaptop_env[] __initdata = "heaptop";
+ char *str;
+ unsigned int memsize;
+ unsigned int heaptop;
+ int i;
+
+ str = prom_getenv(memsz_env);
+ if (!str) {
+ ppfinit("memsize not set in boot prom, "
+ "set to default (32Mb)\n");
+ memsize = 0x02000000;
+ } else {
+ memsize = simple_strtol(str, NULL, 0);
+
+ if (memsize == 0) {
+ /* if memsize is a bad size, use reasonable default */
+ memsize = 0x02000000;
+ }
+
+ /* convert to physical address (removing caching bits, etc) */
+ memsize = CPHYSADDR(memsize);
+ }
+
+ str = prom_getenv(heaptop_env);
+ if (!str) {
+ heaptop = CPHYSADDR((u32)&_text);
+ ppfinit("heaptop not set in boot prom, "
+ "set to default 0x%08x\n", heaptop);
+ } else {
+ heaptop = simple_strtol(str, NULL, 16);
+ if (heaptop == 0) {
+ /* heaptop conversion bad, might have 0xValue */
+ heaptop = simple_strtol(str, NULL, 0);
+
+ if (heaptop == 0) {
+ /* heaptop still bad, use reasonable default */
+ heaptop = CPHYSADDR((u32)&_text);
+ }
+ }
+
+ /* convert to physical address (removing caching bits, etc) */
+ heaptop = CPHYSADDR((u32)heaptop);
+ }
+
+ /* the base region */
+ i = 0;
+ mdesc[i].type = BOOT_MEM_RESERVED;
+ mdesc[i].base = 0x00000000;
+ mdesc[i].size = PAGE_ALIGN(0x300 + 0x80);
+ /* jtag interrupt vector + sizeof vector */
+
+ /* PMON data */
+ if (heaptop > mdesc[i].base + mdesc[i].size) {
+ i++; /* 1 */
+ mdesc[i].type = BOOT_MEM_ROM_DATA;
+ mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size;
+ mdesc[i].size = heaptop - mdesc[i].base;
+ }
+
+ /* end of PMON data to start of kernel -- probably zero .. */
+ if (heaptop != CPHYSADDR((u32)_text)) {
+ i++; /* 2 */
+ mdesc[i].type = BOOT_MEM_RAM;
+ mdesc[i].base = heaptop;
+ mdesc[i].size = CPHYSADDR((u32)_text) - mdesc[i].base;
+ }
+
+ /* kernel proper */
+ i++; /* 3 */
+ mdesc[i].type = BOOT_MEM_RESERVED;
+ mdesc[i].base = CPHYSADDR((u32)_text);
+ mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
+
+ /* Remainder of RAM -- under memsize */
+ i++; /* 5 */
+ mdesc[i].type = yamon_free;
+ mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size;
+ mdesc[i].size = memsize - mdesc[i].base;
+
+ return &mdesc[0];
+}
diff --git a/arch/mips/pmcs-msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c
new file mode 100644
index 00000000000..d304be22b96
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_serial.c
@@ -0,0 +1,154 @@
+/*
+ * The setup file for serial related hardware on PMC-Sierra MSP processors.
+ *
+ * Copyright 2005 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/slab.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/serial.h>
+#include <linux/serial_8250.h>
+
+#include <msp_prom.h>
+#include <msp_int.h>
+#include <msp_regs.h>
+
+struct msp_uart_data {
+ int last_lcr;
+};
+
+static void msp_serial_out(struct uart_port *p, int offset, int value)
+{
+ struct msp_uart_data *d = p->private_data;
+
+ if (offset == UART_LCR)
+ d->last_lcr = value;
+
+ offset <<= p->regshift;
+ writeb(value, p->membase + offset);
+}
+
+static unsigned int msp_serial_in(struct uart_port *p, int offset)
+{
+ offset <<= p->regshift;
+
+ return readb(p->membase + offset);
+}
+
+static int msp_serial_handle_irq(struct uart_port *p)
+{
+ struct msp_uart_data *d = p->private_data;
+ unsigned int iir = readb(p->membase + (UART_IIR << p->regshift));
+
+ if (serial8250_handle_irq(p, iir)) {
+ return 1;
+ } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
+ /*
+ * The DesignWare APB UART has an Busy Detect (0x07) interrupt
+ * meaning an LCR write attempt occurred while the UART was
+ * busy. The interrupt must be cleared by reading the UART
+ * status register (USR) and the LCR re-written.
+ *
+ * Note: MSP reserves 0x20 bytes of address space for the UART
+ * and the USR is mapped in a separate block at an offset of
+ * 0xc0 from the start of the UART.
+ */
+ (void)readb(p->membase + 0xc0);
+ writeb(d->last_lcr, p->membase + (UART_LCR << p->regshift));
+
+ return 1;
+ }
+
+ return 0;
+}
+
+void __init msp_serial_setup(void)
+{
+ char *s;
+ char *endp;
+ struct uart_port up;
+ unsigned int uartclk;
+
+ memset(&up, 0, sizeof(up));
+
+ /* Check if clock was specified in environment */
+ s = prom_getenv("uartfreqhz");
+ if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0))
+ uartclk = MSP_BASE_BAUD;
+ ppfinit("UART clock set to %d\n", uartclk);
+
+ /* Initialize first serial port */
+ up.mapbase = MSP_UART0_BASE;
+ up.membase = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
+ up.irq = MSP_INT_UART0;
+ up.uartclk = uartclk;
+ up.regshift = 2;
+ up.iotype = UPIO_MEM;
+ up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.type = PORT_16550A;
+ up.line = 0;
+ up.serial_out = msp_serial_out;
+ up.serial_in = msp_serial_in;
+ up.handle_irq = msp_serial_handle_irq;
+ up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL);
+ if (!up.private_data) {
+ pr_err("failed to allocate uart private data\n");
+ return;
+ }
+ if (early_serial_setup(&up)) {
+ kfree(up.private_data);
+ pr_err("Early serial init of port 0 failed\n");
+ }
+
+ /* Initialize the second serial port, if one exists */
+ switch (mips_machtype) {
+ case MACH_MSP4200_EVAL:
+ case MACH_MSP4200_GW:
+ case MACH_MSP4200_FPGA:
+ case MACH_MSP7120_EVAL:
+ case MACH_MSP7120_GW:
+ case MACH_MSP7120_FPGA:
+ /* Enable UART1 on MSP4200 and MSP7120 */
+ *GPIO_CFG2_REG = 0x00002299;
+ break;
+
+ default:
+ return; /* No second serial port, good-bye. */
+ }
+
+ up.mapbase = MSP_UART1_BASE;
+ up.membase = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
+ up.irq = MSP_INT_UART1;
+ up.line = 1;
+ up.private_data = (void*)UART1_STATUS_REG;
+ if (early_serial_setup(&up)) {
+ kfree(up.private_data);
+ pr_err("Early serial init of port 1 failed\n");
+ }
+}
diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c
new file mode 100644
index 00000000000..1651cfdbfe7
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_setup.c
@@ -0,0 +1,245 @@
+/*
+ * The generic setup file for PMC-Sierra MSP processors
+ *
+ * Copyright 2005-2007 PMC-Sierra, Inc,
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bootinfo.h>
+#include <asm/cacheflush.h>
+#include <asm/r4kcache.h>
+#include <asm/reboot.h>
+#include <asm/smp-ops.h>
+#include <asm/time.h>
+
+#include <msp_prom.h>
+#include <msp_regs.h>
+
+#if defined(CONFIG_PMC_MSP7120_GW)
+#include <msp_regops.h>
+#define MSP_BOARD_RESET_GPIO 9
+#endif
+
+extern void msp_serial_setup(void);
+extern void pmctwiled_setup(void);
+
+#if defined(CONFIG_PMC_MSP7120_EVAL) || \
+ defined(CONFIG_PMC_MSP7120_GW) || \
+ defined(CONFIG_PMC_MSP7120_FPGA)
+/*
+ * Performs the reset for MSP7120-based boards
+ */
+void msp7120_reset(void)
+{
+ void *start, *end, *iptr;
+ register int i;
+
+ /* Diasble all interrupts */
+ local_irq_disable();
+#ifdef CONFIG_SYS_SUPPORTS_MULTITHREADING
+ dvpe();
+#endif
+
+ /* Cache the reset code of this function */
+ __asm__ __volatile__ (
+ " .set push \n"
+ " .set mips3 \n"
+ " la %0,startpoint \n"
+ " la %1,endpoint \n"
+ " .set pop \n"
+ : "=r" (start), "=r" (end)
+ :
+ );
+
+ for (iptr = (void *)((unsigned int)start & ~(L1_CACHE_BYTES - 1));
+ iptr < end; iptr += L1_CACHE_BYTES)
+ cache_op(Fill, iptr);
+
+ __asm__ __volatile__ (
+ "startpoint: \n"
+ );
+
+ /* Put the DDRC into self-refresh mode */
+ DDRC_INDIRECT_WRITE(DDRC_CTL(10), 0xb, 1 << 16);
+
+ /*
+ * IMPORTANT!
+ * DO NOT do anything from here on out that might even
+ * think about fetching from RAM - i.e., don't call any
+ * non-inlined functions, and be VERY sure that any inline
+ * functions you do call do NOT access any sort of RAM
+ * anywhere!
+ */
+
+ /* Wait a bit for the DDRC to settle */
+ for (i = 0; i < 100000000; i++);
+
+#if defined(CONFIG_PMC_MSP7120_GW)
+ /*
+ * Set GPIO 9 HI, (tied to board reset logic)
+ * GPIO 9 is the 4th GPIO of register 3
+ *
+ * NOTE: We cannot use the higher-level msp_gpio_mode()/out()
+ * as GPIO char driver may not be enabled and it would look up
+ * data inRAM!
+ */
+ set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
+ set_reg32(GPIO_DATA3_REG, 8);
+
+ /*
+ * In case GPIO9 doesn't reset the board (jumper configurable!)
+ * fallback to device reset below.
+ */
+#endif
+ /* Set bit 1 of the MSP7120 reset register */
+ *RST_SET_REG = 0x00000001;
+
+ __asm__ __volatile__ (
+ "endpoint: \n"
+ );
+}
+#endif
+
+void msp_restart(char *command)
+{
+ printk(KERN_WARNING "Now rebooting .......\n");
+
+#if defined(CONFIG_PMC_MSP7120_EVAL) || \
+ defined(CONFIG_PMC_MSP7120_GW) || \
+ defined(CONFIG_PMC_MSP7120_FPGA)
+ msp7120_reset();
+#else
+ /* No chip-specific reset code, just jump to the ROM reset vector */
+ set_c0_status(ST0_BEV | ST0_ERL);
+ change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+ flush_cache_all();
+ write_c0_wired(0);
+
+ __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
+#endif
+}
+
+void msp_halt(void)
+{
+ printk(KERN_WARNING "\n** You can safely turn off the power\n");
+ while (1)
+ /* If possible call official function to get CPU WARs */
+ if (cpu_wait)
+ (*cpu_wait)();
+ else
+ __asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0");
+}
+
+void msp_power_off(void)
+{
+ msp_halt();
+}
+
+void __init plat_mem_setup(void)
+{
+ _machine_restart = msp_restart;
+ _machine_halt = msp_halt;
+ pm_power_off = msp_power_off;
+}
+
+extern struct plat_smp_ops msp_smtc_smp_ops;
+
+void __init prom_init(void)
+{
+ unsigned long family;
+ unsigned long revision;
+
+ prom_argc = fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ /*
+ * Someday we can use this with PMON2000 to get a
+ * platform call prom routines for output etc. without
+ * having to use grody hacks. For now it's unused.
+ *
+ * struct callvectors *cv = (struct callvectors *) fw_arg3;
+ */
+ family = identify_family();
+ revision = identify_revision();
+
+ switch (family) {
+ case FAMILY_FPGA:
+ if (FPGA_IS_MSP4200(revision)) {
+ /* Old-style revision ID */
+ mips_machtype = MACH_MSP4200_FPGA;
+ } else {
+ mips_machtype = MACH_MSP_OTHER;
+ }
+ break;
+
+ case FAMILY_MSP4200:
+#if defined(CONFIG_PMC_MSP4200_EVAL)
+ mips_machtype = MACH_MSP4200_EVAL;
+#elif defined(CONFIG_PMC_MSP4200_GW)
+ mips_machtype = MACH_MSP4200_GW;
+#else
+ mips_machtype = MACH_MSP_OTHER;
+#endif
+ break;
+
+ case FAMILY_MSP4200_FPGA:
+ mips_machtype = MACH_MSP4200_FPGA;
+ break;
+
+ case FAMILY_MSP7100:
+#if defined(CONFIG_PMC_MSP7120_EVAL)
+ mips_machtype = MACH_MSP7120_EVAL;
+#elif defined(CONFIG_PMC_MSP7120_GW)
+ mips_machtype = MACH_MSP7120_GW;
+#else
+ mips_machtype = MACH_MSP_OTHER;
+#endif
+ break;
+
+ case FAMILY_MSP7100_FPGA:
+ mips_machtype = MACH_MSP7120_FPGA;
+ break;
+
+ default:
+ /* we don't recognize the machine */
+ mips_machtype = MACH_UNKNOWN;
+ panic("***Bogosity factor five***, exiting");
+ break;
+ }
+
+ prom_init_cmdline();
+
+ prom_meminit();
+
+ /*
+ * Sub-system setup follows.
+ * Setup functions can either be called here or using the
+ * subsys_initcall mechanism (i.e. see msp_pci_setup). The
+ * order in which they are called can be changed by using the
+ * link order in arch/mips/pmc-sierra/msp71xx/Makefile.
+ *
+ * NOTE: Please keep sub-system specific initialization code
+ * in separate specific files.
+ */
+ msp_serial_setup();
+
+ if (register_vsmp_smp_ops()) {
+#ifdef CONFIG_MIPS_MT_SMTC
+ register_smp_ops(&msp_smtc_smp_ops);
+#endif
+ }
+
+#ifdef CONFIG_PMCTWILED
+ /*
+ * Setup LED states before the subsys_initcall loads other
+ * dependent drivers/modules.
+ */
+ pmctwiled_setup();
+#endif
+}
diff --git a/arch/mips/pmcs-msp71xx/msp_smp.c b/arch/mips/pmcs-msp71xx/msp_smp.c
new file mode 100644
index 00000000000..10170580a2d
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_smp.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ * Copyright (C) 2010 PMC-Sierra, Inc.
+ *
+ * VSMP support for MSP platforms . Derived from malta vsmp support.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+
+#ifdef CONFIG_MIPS_MT_SMP
+#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */
+#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for call */
+
+
+static void ipi_resched_dispatch(void)
+{
+ do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ);
+}
+
+static void ipi_call_dispatch(void)
+{
+ do_IRQ(MIPS_CPU_IPI_CALL_IRQ);
+}
+
+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
+{
+ smp_call_function_interrupt();
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+ .handler = ipi_resched_interrupt,
+ .flags = IRQF_PERCPU,
+ .name = "IPI_resched"
+};
+
+static struct irqaction irq_call = {
+ .handler = ipi_call_interrupt,
+ .flags = IRQF_PERCPU,
+ .name = "IPI_call"
+};
+
+void __init arch_init_ipiirq(int irq, struct irqaction *action)
+{
+ setup_irq(irq, action);
+ irq_set_handler(irq, handle_percpu_irq);
+}
+
+void __init msp_vsmp_int_init(void)
+{
+ set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+ set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
+ arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, &irq_resched);
+ arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, &irq_call);
+}
+#endif /* CONFIG_MIPS_MT_SMP */
diff --git a/arch/mips/pmcs-msp71xx/msp_smtc.c b/arch/mips/pmcs-msp71xx/msp_smtc.c
new file mode 100644
index 00000000000..c8dcc1c01e1
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_smtc.c
@@ -0,0 +1,105 @@
+/*
+ * MSP71xx Platform-specific hooks for SMP operation
+ */
+#include <linux/irq.h>
+#include <linux/init.h>
+
+#include <asm/mipsmtregs.h>
+#include <asm/mipsregs.h>
+#include <asm/smtc.h>
+#include <asm/smtc_ipi.h>
+
+/* VPE/SMP Prototype implements platform interfaces directly */
+
+/*
+ * Cause the specified action to be performed on a targeted "CPU"
+ */
+
+static void msp_smtc_send_ipi_single(int cpu, unsigned int action)
+{
+ /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+ smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
+}
+
+static void msp_smtc_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
+{
+ unsigned int i;
+
+ for_each_cpu(i, mask)
+ msp_smtc_send_ipi_single(i, action);
+}
+
+/*
+ * Post-config but pre-boot cleanup entry point
+ */
+static void __cpuinit msp_smtc_init_secondary(void)
+{
+ int myvpe;
+
+ /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
+ myvpe = read_c0_tcbind() & TCBIND_CURVPE;
+ if (myvpe > 0)
+ change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 |
+ STATUSF_IP6 | STATUSF_IP7);
+ smtc_init_secondary();
+}
+
+/*
+ * Platform "CPU" startup hook
+ */
+static void __cpuinit msp_smtc_boot_secondary(int cpu,
+ struct task_struct *idle)
+{
+ smtc_boot_secondary(cpu, idle);
+}
+
+/*
+ * SMP initialization finalization entry point
+ */
+static void __cpuinit msp_smtc_smp_finish(void)
+{
+ smtc_smp_finish();
+}
+
+/*
+ * Hook for after all CPUs are online
+ */
+
+static void msp_smtc_cpus_done(void)
+{
+}
+
+/*
+ * Platform SMP pre-initialization
+ *
+ * As noted above, we can assume a single CPU for now
+ * but it may be multithreaded.
+ */
+
+static void __init msp_smtc_smp_setup(void)
+{
+ /*
+ * we won't get the definitive value until
+ * we've run smtc_prepare_cpus later, but
+ */
+
+ if (read_c0_config3() & (1 << 2))
+ smp_num_siblings = smtc_build_cpu_map(0);
+}
+
+static void __init msp_smtc_prepare_cpus(unsigned int max_cpus)
+{
+ smtc_prepare_cpus(max_cpus);
+}
+
+struct plat_smp_ops msp_smtc_smp_ops = {
+ .send_ipi_single = msp_smtc_send_ipi_single,
+ .send_ipi_mask = msp_smtc_send_ipi_mask,
+ .init_secondary = msp_smtc_init_secondary,
+ .smp_finish = msp_smtc_smp_finish,
+ .cpus_done = msp_smtc_cpus_done,
+ .boot_secondary = msp_smtc_boot_secondary,
+ .smp_setup = msp_smtc_smp_setup,
+ .prepare_cpus = msp_smtc_prepare_cpus,
+};
diff --git a/arch/mips/pmcs-msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c
new file mode 100644
index 00000000000..8f12ecc55ac
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_time.c
@@ -0,0 +1,101 @@
+/*
+ * Setting up the clock on MSP SOCs. No RTC typically.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ */
+
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+
+#include <asm/cevt-r4k.h>
+#include <asm/mipsregs.h>
+#include <asm/time.h>
+
+#include <msp_prom.h>
+#include <msp_int.h>
+#include <msp_regs.h>
+
+#define get_current_vpe() \
+ ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
+
+static struct irqaction timer_vpe1;
+static int tim_installed;
+
+void __init plat_time_init(void)
+{
+ char *endp, *s;
+ unsigned long cpu_rate = 0;
+
+ if (cpu_rate == 0) {
+ s = prom_getenv("clkfreqhz");
+ cpu_rate = simple_strtoul(s, &endp, 10);
+ if (endp != NULL && *endp != 0) {
+ printk(KERN_ERR
+ "Clock rate in Hz parse error: %s\n", s);
+ cpu_rate = 0;
+ }
+ }
+
+ if (cpu_rate == 0) {
+ s = prom_getenv("clkfreq");
+ cpu_rate = 1000 * simple_strtoul(s, &endp, 10);
+ if (endp != NULL && *endp != 0) {
+ printk(KERN_ERR
+ "Clock rate in MHz parse error: %s\n", s);
+ cpu_rate = 0;
+ }
+ }
+
+ if (cpu_rate == 0) {
+#if defined(CONFIG_PMC_MSP7120_EVAL) \
+ || defined(CONFIG_PMC_MSP7120_GW)
+ cpu_rate = 400000000;
+#elif defined(CONFIG_PMC_MSP7120_FPGA)
+ cpu_rate = 25000000;
+#else
+ cpu_rate = 150000000;
+#endif
+ printk(KERN_ERR
+ "Failed to determine CPU clock rate, "
+ "assuming %ld hz ...\n", cpu_rate);
+ }
+
+ printk(KERN_WARNING "Clock rate set to %ld\n", cpu_rate);
+
+ /* timer frequency is 1/2 clock rate */
+ mips_hpt_frequency = cpu_rate/2;
+}
+
+unsigned int __cpuinit get_c0_compare_int(void)
+{
+ /* MIPS_MT modes may want timer for second VPE */
+ if ((get_current_vpe()) && !tim_installed) {
+ memcpy(&timer_vpe1, &c0_compare_irqaction, sizeof(timer_vpe1));
+ setup_irq(MSP_INT_VPE1_TIMER, &timer_vpe1);
+ tim_installed++;
+ }
+
+ return get_current_vpe() ? MSP_INT_VPE1_TIMER : MSP_INT_VPE0_TIMER;
+}
diff --git a/arch/mips/pmcs-msp71xx/msp_usb.c b/arch/mips/pmcs-msp71xx/msp_usb.c
new file mode 100644
index 00000000000..4dab915696e
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_usb.c
@@ -0,0 +1,263 @@
+/*
+ * The setup file for USB related hardware on PMC-Sierra MSP processors.
+ *
+ * Copyright 2006 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET)
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mipsregs.h>
+
+#include <msp_regs.h>
+#include <msp_int.h>
+#include <msp_prom.h>
+#include <msp_usb.h>
+
+
+#if defined(CONFIG_USB_EHCI_HCD)
+static struct resource msp_usbhost0_resources[] = {
+ [0] = { /* EHCI-HS operational and capabilities registers */
+ .start = MSP_USB0_HS_START,
+ .end = MSP_USB0_HS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_USB,
+ .end = MSP_INT_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = { /* MSBus-to-AMBA bridge register space */
+ .start = MSP_USB0_MAB_START,
+ .end = MSP_USB0_MAB_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = { /* Identification and general hardware parameters */
+ .start = MSP_USB0_ID_START,
+ .end = MSP_USB0_ID_END,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static u64 msp_usbhost0_dma_mask = 0xffffffffUL;
+
+static struct mspusb_device msp_usbhost0_device = {
+ .dev = {
+ .name = "pmcmsp-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &msp_usbhost0_dma_mask,
+ .coherent_dma_mask = 0xffffffffUL,
+ },
+ .num_resources = ARRAY_SIZE(msp_usbhost0_resources),
+ .resource = msp_usbhost0_resources,
+ },
+};
+
+/* MSP7140/MSP82XX has two USB2 hosts. */
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+static u64 msp_usbhost1_dma_mask = 0xffffffffUL;
+
+static struct resource msp_usbhost1_resources[] = {
+ [0] = { /* EHCI-HS operational and capabilities registers */
+ .start = MSP_USB1_HS_START,
+ .end = MSP_USB1_HS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_USB,
+ .end = MSP_INT_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = { /* MSBus-to-AMBA bridge register space */
+ .start = MSP_USB1_MAB_START,
+ .end = MSP_USB1_MAB_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = { /* Identification and general hardware parameters */
+ .start = MSP_USB1_ID_START,
+ .end = MSP_USB1_ID_END,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mspusb_device msp_usbhost1_device = {
+ .dev = {
+ .name = "pmcmsp-ehci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &msp_usbhost1_dma_mask,
+ .coherent_dma_mask = 0xffffffffUL,
+ },
+ .num_resources = ARRAY_SIZE(msp_usbhost1_resources),
+ .resource = msp_usbhost1_resources,
+ },
+};
+#endif /* CONFIG_MSP_HAS_DUAL_USB */
+#endif /* CONFIG_USB_EHCI_HCD */
+
+#if defined(CONFIG_USB_GADGET)
+static struct resource msp_usbdev0_resources[] = {
+ [0] = { /* EHCI-HS operational and capabilities registers */
+ .start = MSP_USB0_HS_START,
+ .end = MSP_USB0_HS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_USB,
+ .end = MSP_INT_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = { /* MSBus-to-AMBA bridge register space */
+ .start = MSP_USB0_MAB_START,
+ .end = MSP_USB0_MAB_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = { /* Identification and general hardware parameters */
+ .start = MSP_USB0_ID_START,
+ .end = MSP_USB0_ID_END,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static u64 msp_usbdev_dma_mask = 0xffffffffUL;
+
+/* This may need to be converted to a mspusb_device, too. */
+static struct mspusb_device msp_usbdev0_device = {
+ .dev = {
+ .name = "msp71xx_udc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &msp_usbdev_dma_mask,
+ .coherent_dma_mask = 0xffffffffUL,
+ },
+ .num_resources = ARRAY_SIZE(msp_usbdev0_resources),
+ .resource = msp_usbdev0_resources,
+ },
+};
+
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+static struct resource msp_usbdev1_resources[] = {
+ [0] = { /* EHCI-HS operational and capabilities registers */
+ .start = MSP_USB1_HS_START,
+ .end = MSP_USB1_HS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSP_INT_USB,
+ .end = MSP_INT_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = { /* MSBus-to-AMBA bridge register space */
+ .start = MSP_USB1_MAB_START,
+ .end = MSP_USB1_MAB_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = { /* Identification and general hardware parameters */
+ .start = MSP_USB1_ID_START,
+ .end = MSP_USB1_ID_END,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+/* This may need to be converted to a mspusb_device, too. */
+static struct mspusb_device msp_usbdev1_device = {
+ .dev = {
+ .name = "msp71xx_udc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &msp_usbdev_dma_mask,
+ .coherent_dma_mask = 0xffffffffUL,
+ },
+ .num_resources = ARRAY_SIZE(msp_usbdev1_resources),
+ .resource = msp_usbdev1_resources,
+ },
+};
+
+#endif /* CONFIG_MSP_HAS_DUAL_USB */
+#endif /* CONFIG_USB_GADGET */
+
+static int __init msp_usb_setup(void)
+{
+ char *strp;
+ char envstr[32];
+ struct platform_device *msp_devs[NUM_USB_DEVS];
+ unsigned int val;
+
+ /* construct environment name usbmode */
+ /* set usbmode <host/device> as pmon environment var */
+ /*
+ * Could this perhaps be integrated into the "features" env var?
+ * Use the features key "U", and follow with "H" for host-mode,
+ * "D" for device-mode. If it works for Ethernet, why not USB...
+ * -- hammtrev, 2007/03/22
+ */
+ snprintf((char *)&envstr[0], sizeof(envstr), "usbmode");
+
+ /* set default host mode */
+ val = 1;
+
+ /* get environment string */
+ strp = prom_getenv((char *)&envstr[0]);
+ if (strp) {
+ /* compare string */
+ if (!strcmp(strp, "device"))
+ val = 0;
+ }
+
+ if (val) {
+#if defined(CONFIG_USB_EHCI_HCD)
+ msp_devs[0] = &msp_usbhost0_device.dev;
+ ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name);
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+ msp_devs[1] = &msp_usbhost1_device.dev;
+ ppfinit("platform add USB HOST done %s.\n", msp_devs[1]->name);
+#endif
+#else
+ ppfinit("%s: echi_hcd not supported\n", __FILE__);
+#endif /* CONFIG_USB_EHCI_HCD */
+ } else {
+#if defined(CONFIG_USB_GADGET)
+ /* get device mode structure */
+ msp_devs[0] = &msp_usbdev0_device.dev;
+ ppfinit("platform add USB DEVICE done %s.\n"
+ , msp_devs[0]->name);
+#ifdef CONFIG_MSP_HAS_DUAL_USB
+ msp_devs[1] = &msp_usbdev1_device.dev;
+ ppfinit("platform add USB DEVICE done %s.\n"
+ , msp_devs[1]->name);
+#endif
+#else
+ ppfinit("%s: usb_gadget not supported\n", __FILE__);
+#endif /* CONFIG_USB_GADGET */
+ }
+ /* add device */
+ platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs));
+
+ return 0;
+}
+
+subsys_initcall(msp_usb_setup);
+#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-28 17:19:16 +0000