aboutsummaryrefslogtreecommitdiff
path: root/arch/mips
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/Kbuild.platforms1
-rw-r--r--arch/mips/Kconfig36
-rw-r--r--arch/mips/alchemy/board-mtx1.c4
-rw-r--r--arch/mips/alchemy/common/platform.c10
-rw-r--r--arch/mips/alchemy/devboards/Makefile2
-rw-r--r--arch/mips/alchemy/devboards/bcsr.c5
-rw-r--r--arch/mips/alchemy/devboards/pb1100.c4
-rw-r--r--arch/mips/alchemy/devboards/pb1500.c4
-rw-r--r--arch/mips/alchemy/devboards/platform.c30
-rw-r--r--arch/mips/alchemy/devboards/prom.c69
-rw-r--r--arch/mips/bcm63xx/Kconfig4
-rw-r--r--arch/mips/bcm63xx/Makefile3
-rw-r--r--arch/mips/bcm63xx/boards/board_bcm963xx.c107
-rw-r--r--arch/mips/bcm63xx/clk.c26
-rw-r--r--arch/mips/bcm63xx/cpu.c63
-rw-r--r--arch/mips/bcm63xx/dev-dsp.c2
-rw-r--r--arch/mips/bcm63xx/dev-flash.c123
-rw-r--r--arch/mips/bcm63xx/dev-rng.c40
-rw-r--r--arch/mips/bcm63xx/dev-spi.c119
-rw-r--r--arch/mips/bcm63xx/dev-wdt.c2
-rw-r--r--arch/mips/bcm63xx/irq.c21
-rw-r--r--arch/mips/bcm63xx/prom.c4
-rw-r--r--arch/mips/bcm63xx/setup.c13
-rw-r--r--arch/mips/boot/compressed/Makefile4
-rw-r--r--arch/mips/boot/compressed/uart-16550.c5
-rw-r--r--arch/mips/cavium-octeon/octeon-memcpy.S16
-rw-r--r--arch/mips/configs/ls1b_defconfig109
-rw-r--r--arch/mips/configs/nlm_xlr_defconfig4
-rw-r--r--arch/mips/dec/prom/memory.c2
-rw-r--r--arch/mips/include/asm/cpu.h3
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h150
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h12
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h89
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h2
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h8
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h286
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/ioremap.h1
-rw-r--r--arch/mips/include/asm/mach-jz4740/jz4740_nand.h4
-rw-r--r--arch/mips/include/asm/mach-loongson/loongson.h3
-rw-r--r--arch/mips/include/asm/mach-loongson1/irq.h73
-rw-r--r--arch/mips/include/asm/mach-loongson1/loongson1.h44
-rw-r--r--arch/mips/include/asm/mach-loongson1/platform.h23
-rw-r--r--arch/mips/include/asm/mach-loongson1/prom.h24
-rw-r--r--arch/mips/include/asm/mach-loongson1/regs-clk.h33
-rw-r--r--arch/mips/include/asm/mach-loongson1/regs-wdt.h22
-rw-r--r--arch/mips/include/asm/mach-loongson1/war.h25
-rw-r--r--arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-tx49xx/mangle-port.h2
-rw-r--r--arch/mips/include/asm/mipsmtregs.h13
-rw-r--r--arch/mips/include/asm/module.h2
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h4
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/iomap.h5
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/pcibus.h76
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/pic.h4
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/usb.h64
-rw-r--r--arch/mips/include/asm/netlogic/xlp-hal/xlp.h17
-rw-r--r--arch/mips/include/asm/netlogic/xlr/bridge.h104
-rw-r--r--arch/mips/include/asm/netlogic/xlr/flash.h55
-rw-r--r--arch/mips/include/asm/netlogic/xlr/gpio.h59
-rw-r--r--arch/mips/include/asm/smtc.h6
-rw-r--r--arch/mips/include/asm/uaccess.h6
-rw-r--r--arch/mips/include/asm/uasm.h100
-rw-r--r--arch/mips/jz4740/board-qi_lb60.c1
-rw-r--r--arch/mips/jz4740/platform.c20
-rw-r--r--arch/mips/jz4740/reset.c49
-rw-r--r--arch/mips/kernel/cpu-probe.c299
-rw-r--r--arch/mips/kernel/perf_event_mipsxx.c5
-rw-r--r--arch/mips/kernel/smp.c4
-rw-r--r--arch/mips/kernel/smtc.c76
-rw-r--r--arch/mips/kernel/traps.c1
-rw-r--r--arch/mips/lib/Makefile2
-rw-r--r--arch/mips/lib/memcpy-inatomic.S451
-rw-r--r--arch/mips/lib/memcpy.S11
-rw-r--r--arch/mips/loongson1/Kconfig21
-rw-r--r--arch/mips/loongson1/Makefile11
-rw-r--r--arch/mips/loongson1/Platform7
-rw-r--r--arch/mips/loongson1/common/Makefile5
-rw-r--r--arch/mips/loongson1/common/clock.c165
-rw-r--r--arch/mips/loongson1/common/irq.c147
-rw-r--r--arch/mips/loongson1/common/platform.c124
-rw-r--r--arch/mips/loongson1/common/prom.c87
-rw-r--r--arch/mips/loongson1/common/reset.c45
-rw-r--r--arch/mips/loongson1/common/setup.c29
-rw-r--r--arch/mips/loongson1/ls1b/Makefile5
-rw-r--r--arch/mips/loongson1/ls1b/board.c33
-rw-r--r--arch/mips/mm/uasm.c62
-rw-r--r--arch/mips/netlogic/common/earlycons.c2
-rw-r--r--arch/mips/netlogic/common/smpboot.S157
-rw-r--r--arch/mips/netlogic/xlp/Makefile1
-rw-r--r--arch/mips/netlogic/xlp/nlm_hal.c52
-rw-r--r--arch/mips/netlogic/xlp/platform.c2
-rw-r--r--arch/mips/netlogic/xlp/setup.c16
-rw-r--r--arch/mips/netlogic/xlp/usb-init.c124
-rw-r--r--arch/mips/netlogic/xlr/Makefile2
-rw-r--r--arch/mips/netlogic/xlr/platform-flash.c220
-rw-r--r--arch/mips/netlogic/xlr/platform.c140
-rw-r--r--arch/mips/netlogic/xlr/setup.c2
-rw-r--r--arch/mips/oprofile/common.c1
-rw-r--r--arch/mips/oprofile/op_model_mipsxx.c10
-rw-r--r--arch/mips/pci/Makefile1
-rw-r--r--arch/mips/pci/fixup-cobalt.c8
-rw-r--r--arch/mips/pci/fixup-malta.c14
-rw-r--r--arch/mips/pci/fixup-rc32434.c2
-rw-r--r--arch/mips/pci/ops-bcm63xx.c63
-rw-r--r--arch/mips/pci/pci-bcm63xx.c133
-rw-r--r--arch/mips/pci/pci-bcm63xx.h5
-rw-r--r--arch/mips/pci/pci-xlp.c248
-rw-r--r--arch/mips/pci/pci-xlr.c4
-rw-r--r--arch/mips/pnx833x/stb22x/board.c4
-rw-r--r--arch/mips/txx9/generic/pci.c6
-rw-r--r--arch/mips/txx9/generic/setup.c12
-rw-r--r--arch/mips/txx9/generic/setup_tx4939.c2
-rw-r--r--arch/mips/txx9/rbtx4939/setup.c11
113 files changed, 4034 insertions, 1020 deletions
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 5ce8029f558..d64786d5e2f 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -14,6 +14,7 @@ platforms += jz4740
platforms += lantiq
platforms += lasat
platforms += loongson
+platforms += loongson1
platforms += mipssim
platforms += mti-malta
platforms += netlogic
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 00045d6ce8e..75042901853 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -209,6 +209,7 @@ config MACH_JZ4740
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_ZBOOT_UART16550
select DMA_NONCOHERENT
select IRQ_CPU
select GENERIC_GPIO
@@ -264,6 +265,16 @@ config MACH_LOONGSON
Chinese Academy of Sciences (CAS) in the People's Republic
of China. The chief architect is Professor Weiwu Hu.
+config MACH_LOONGSON1
+ bool "Loongson 1 family of machines"
+ select SYS_SUPPORTS_ZBOOT
+ help
+ This enables support for the Loongson 1 based machines.
+
+ Loongson 1 is a family of 32-bit MIPS-compatible SoCs developed by
+ the ICT (Institute of Computing Technology) and the Chinese Academy
+ of Sciences.
+
config MIPS_MALTA
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
@@ -787,6 +798,8 @@ config NLM_XLR_BOARD
select ZONE_DMA if 64BIT
select SYNC_R4K
select SYS_HAS_EARLY_PRINTK
+ select USB_ARCH_HAS_OHCI if USB_SUPPORT
+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
help
Support for systems based on Netlogic XLR and XLS processors.
Say Y here if you have a XLR or XLS based board.
@@ -799,7 +812,6 @@ config NLM_XLP_BOARD
select SYS_HAS_CPU_XLP
select SYS_SUPPORTS_SMP
select HW_HAS_PCI
- select SWAP_IO_SPACE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select 64BIT_PHYS_ADDR
@@ -836,6 +848,7 @@ source "arch/mips/txx9/Kconfig"
source "arch/mips/vr41xx/Kconfig"
source "arch/mips/cavium-octeon/Kconfig"
source "arch/mips/loongson/Kconfig"
+source "arch/mips/loongson1/Kconfig"
source "arch/mips/netlogic/Kconfig"
endmenu
@@ -1217,6 +1230,14 @@ config CPU_LOONGSON2F
have a similar programming interface with FPGA northbridge used in
Loongson2E.
+config CPU_LOONGSON1B
+ bool "Loongson 1B"
+ depends on SYS_HAS_CPU_LOONGSON1B
+ select CPU_LOONGSON1
+ help
+ The Loongson 1B is a 32-bit SoC, which implements the MIPS32
+ release 2 instruction set.
+
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
@@ -1546,6 +1567,14 @@ config CPU_LOONGSON2
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
+config CPU_LOONGSON1
+ bool
+ select CPU_MIPS32
+ select CPU_MIPSR2
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
config CPU_BMIPS
bool
select CPU_MIPS32
@@ -1564,6 +1593,9 @@ config SYS_HAS_CPU_LOONGSON2F
select CPU_SUPPORTS_ADDRWINCFG if 64BIT
select CPU_SUPPORTS_UNCACHED_ACCELERATED
+config SYS_HAS_CPU_LOONGSON1B
+ bool
+
config SYS_HAS_CPU_MIPS32_R1
bool
@@ -2368,6 +2400,8 @@ config PCI_DOMAINS
source "drivers/pci/Kconfig"
+source "drivers/pci/pcie/Kconfig"
+
#
# ISA support is now enabled via select. Too many systems still have the one
# or other ISA chip on the board that users don't know about so don't expect
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
index 295f1a95f74..99969484c47 100644
--- a/arch/mips/alchemy/board-mtx1.c
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -81,10 +81,10 @@ static void mtx1_power_off(void)
void __init board_setup(void)
{
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
/* Enable USB power switch */
alchemy_gpio_direction_output(204, 0);
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+#endif /* IS_ENABLED(CONFIG_USB_OHCI_HCD) */
/* Initialize sys_pinfunc */
au_writel(SYS_PF_NI2, SYS_PINFUNC);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 95cb9113b12..c0f3ce6dcb5 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -334,13 +334,12 @@ static void __init alchemy_setup_macs(int ctype)
if (alchemy_get_macs(ctype) < 1)
return;
- macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+ macres = kmemdup(au1xxx_eth0_resources[ctype],
+ sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
if (!macres) {
printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
return;
}
- memcpy(macres, au1xxx_eth0_resources[ctype],
- sizeof(struct resource) * MAC_RES_COUNT);
au1xxx_eth0_device.resource = macres;
i = prom_get_ethernet_addr(ethaddr);
@@ -356,13 +355,12 @@ static void __init alchemy_setup_macs(int ctype)
if (alchemy_get_macs(ctype) < 2)
return;
- macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+ macres = kmemdup(au1xxx_eth1_resources[ctype],
+ sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
if (!macres) {
printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
return;
}
- memcpy(macres, au1xxx_eth1_resources[ctype],
- sizeof(struct resource) * MAC_RES_COUNT);
au1xxx_eth1_device.resource = macres;
ethaddr[5] += 1; /* next addr for 2nd MAC */
diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
index 3c37fb30336..c9e747dd9fc 100644
--- a/arch/mips/alchemy/devboards/Makefile
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -2,7 +2,7 @@
# Alchemy Develboards
#
-obj-y += prom.o bcsr.o platform.o
+obj-y += bcsr.o platform.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MIPS_PB1100) += pb1100.o
obj-$(CONFIG_MIPS_PB1500) += pb1500.o
diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c
index 1e83ce2e114..f2039ef2c29 100644
--- a/arch/mips/alchemy/devboards/bcsr.c
+++ b/arch/mips/alchemy/devboards/bcsr.c
@@ -90,10 +90,7 @@ static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d)
unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT);
disable_irq_nosync(irq);
-
- for ( ; bisr; bisr &= bisr - 1)
- generic_handle_irq(bcsr_csc_base + __ffs(bisr));
-
+ generic_handle_irq(bcsr_csc_base + __ffs(bisr));
enable_irq(irq);
}
diff --git a/arch/mips/alchemy/devboards/pb1100.c b/arch/mips/alchemy/devboards/pb1100.c
index cff50d05ddd..78c77a44a31 100644
--- a/arch/mips/alchemy/devboards/pb1100.c
+++ b/arch/mips/alchemy/devboards/pb1100.c
@@ -46,7 +46,7 @@ void __init board_setup(void)
alchemy_gpio1_input_enable();
udelay(100);
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
{
u32 pin_func, sys_freqctrl, sys_clksrc;
@@ -93,7 +93,7 @@ void __init board_setup(void)
pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
}
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+#endif /* IS_ENABLED(CONFIG_USB_OHCI_HCD) */
/* Enable sys bus clock divider when IDLE state or no bus activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
diff --git a/arch/mips/alchemy/devboards/pb1500.c b/arch/mips/alchemy/devboards/pb1500.c
index e7b807b3ec5..232fee94200 100644
--- a/arch/mips/alchemy/devboards/pb1500.c
+++ b/arch/mips/alchemy/devboards/pb1500.c
@@ -53,7 +53,7 @@ void __init board_setup(void)
alchemy_gpio_direction_input(201);
alchemy_gpio_direction_input(203);
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
/* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
@@ -87,7 +87,7 @@ void __init board_setup(void)
/* 2nd USB port is USB host */
pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
-#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
+#endif /* IS_ENABLED(CONFIG_USB_OHCI_HCD) */
#ifdef CONFIG_PCI
{
diff --git a/arch/mips/alchemy/devboards/platform.c b/arch/mips/alchemy/devboards/platform.c
index 621f70afb63..f39042e99d0 100644
--- a/arch/mips/alchemy/devboards/platform.c
+++ b/arch/mips/alchemy/devboards/platform.c
@@ -10,9 +10,39 @@
#include <linux/platform_device.h>
#include <linux/pm.h>
+#include <asm/bootinfo.h>
#include <asm/reboot.h>
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
+#include <prom.h>
+
+void __init prom_init(void)
+{
+ unsigned char *memsize_str;
+ unsigned long memsize;
+
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ prom_init_cmdline();
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
+ memsize = 64 << 20; /* all devboards have at least 64MB RAM */
+
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+#ifdef CONFIG_MIPS_DB1300
+ alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);
+#else
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+#endif
+}
+
static struct platform_device db1x00_rtc_dev = {
.name = "rtc-au1xxx",
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
deleted file mode 100644
index 93a22107cc4..00000000000
--- a/arch/mips/alchemy/devboards/prom.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Common code used by all Alchemy develboards.
- *
- * Extracted from files which had this to say:
- *
- * Copyright 2000, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/bootinfo.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <prom.h>
-
-#if defined(CONFIG_MIPS_DB1000) || \
- defined(CONFIG_MIPS_PB1100) || \
- defined(CONFIG_MIPS_PB1500)
-#define ALCHEMY_BOARD_DEFAULT_MEMSIZE 0x04000000
-
-#else /* Au1550/Au1200-based develboards */
-#define ALCHEMY_BOARD_DEFAULT_MEMSIZE 0x08000000
-#endif
-
-void __init prom_init(void)
-{
- unsigned char *memsize_str;
- unsigned long memsize;
-
- prom_argc = (int)fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- prom_init_cmdline();
- memsize_str = prom_getenv("memsize");
- if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
- memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
-
- add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void prom_putchar(unsigned char c)
-{
-#ifdef CONFIG_MIPS_DB1300
- alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);
-#else
- alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
-#endif
-}
diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
index 6b1b9ad8d85..d03e8799d1c 100644
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -1,6 +1,10 @@
menu "CPU support"
depends on BCM63XX
+config BCM63XX_CPU_6328
+ bool "support 6328 CPU"
+ select HW_HAS_PCI
+
config BCM63XX_CPU_6338
bool "support 6338 CPU"
select HW_HAS_PCI
diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index 6dfdc69928a..833af72c852 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,5 +1,6 @@
obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o
+ dev-dsp.o dev-enet.o dev-flash.o dev-pcmcia.o dev-rng.o \
+ dev-spi.o dev-uart.o dev-wdt.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-y += boards/
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 2f1773f3fb7..feb05258a4d 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -11,9 +11,6 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
#include <linux/ssb/ssb.h>
#include <asm/addrspace.h>
#include <bcm63xx_board.h>
@@ -24,7 +21,9 @@
#include <bcm63xx_dev_pci.h>
#include <bcm63xx_dev_enet.h>
#include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_dev_flash.h>
#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_dev_spi.h>
#include <board_bcm963xx.h>
#define PFX "board_bcm963xx: "
@@ -34,6 +33,48 @@ static unsigned int mac_addr_used;
static struct board_info board;
/*
+ * known 6328 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6328
+static struct board_info __initdata board_96328avng = {
+ .name = "96328avng",
+ .expected_cpu_id = 0x6328,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+
+ .leds = {
+ {
+ .name = "96328avng::ppp-fail",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "96328avng::power",
+ .gpio = 4,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "96328avng::power-fail",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "96328avng::wps",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "96328avng::ppp",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ },
+};
+#endif
+
+/*
* known 6338 boards
*/
#ifdef CONFIG_BCM63XX_CPU_6338
@@ -592,6 +633,9 @@ static struct board_info __initdata board_DWVS0 = {
* all boards
*/
static const struct board_info __initdata *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_6328
+ &board_96328avng,
+#endif
#ifdef CONFIG_BCM63XX_CPU_6338
&board_96338gw,
&board_96338w,
@@ -709,9 +753,15 @@ void __init board_prom_init(void)
char cfe_version[32];
u32 val;
- /* read base address of boot chip select (0) */
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
+ /* read base address of boot chip select (0)
+ * 6328 does not have MPI but boots from a fixed address
+ */
+ if (BCMCPU_IS_6328())
+ val = 0x18000000;
+ else {
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
+ }
boot_addr = (u8 *)KSEG1ADDR(val);
/* dump cfe version */
@@ -808,40 +858,6 @@ void __init board_setup(void)
panic("unexpected CPU for bcm963xx board");
}
-static struct mtd_partition mtd_partitions[] = {
- {
- .name = "cfe",
- .offset = 0x0,
- .size = 0x40000,
- }
-};
-
-static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
-
-static struct physmap_flash_data flash_data = {
- .width = 2,
- .nr_parts = ARRAY_SIZE(mtd_partitions),
- .parts = mtd_partitions,
- .part_probe_types = bcm63xx_part_types,
-};
-
-static struct resource mtd_resources[] = {
- {
- .start = 0, /* filled at runtime */
- .end = 0, /* filled at runtime */
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device mtd_dev = {
- .name = "physmap-flash",
- .resource = mtd_resources,
- .num_resources = ARRAY_SIZE(mtd_resources),
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
static struct gpio_led_platform_data bcm63xx_led_data;
static struct platform_device bcm63xx_gpio_leds = {
@@ -855,8 +871,6 @@ static struct platform_device bcm63xx_gpio_leds = {
*/
int __init board_register_devices(void)
{
- u32 val;
-
if (board.has_uart0)
bcm63xx_uart_register(0);
@@ -890,14 +904,9 @@ int __init board_register_devices(void)
}
#endif
- /* read base address of boot chip select (0) */
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
-
- mtd_resources[0].start = val;
- mtd_resources[0].end = 0x1FFFFFFF;
+ bcm63xx_spi_register();
- platform_device_register(&mtd_dev);
+ bcm63xx_flash_register();
bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
bcm63xx_led_data.leds = board.leds;
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 9d57c71b7b5..1db48adb543 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -120,7 +120,7 @@ static void enetsw_set(struct clk *clk, int enable)
{
if (!BCMCPU_IS_6368())
return;
- bcm_hwclock_set(CKCTL_6368_ROBOSW_CLK_EN |
+ bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
CKCTL_6368_SWPKT_USB_EN |
CKCTL_6368_SWPKT_SAR_EN, enable);
if (enable) {
@@ -163,7 +163,7 @@ static void usbh_set(struct clk *clk, int enable)
if (BCMCPU_IS_6348())
bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
else if (BCMCPU_IS_6368())
- bcm_hwclock_set(CKCTL_6368_USBH_CLK_EN, enable);
+ bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
}
static struct clk clk_usbh = {
@@ -181,9 +181,11 @@ static void spi_set(struct clk *clk, int enable)
mask = CKCTL_6338_SPI_EN;
else if (BCMCPU_IS_6348())
mask = CKCTL_6348_SPI_EN;
- else
- /* BCMCPU_IS_6358 */
+ else if (BCMCPU_IS_6358())
mask = CKCTL_6358_SPI_EN;
+ else
+ /* BCMCPU_IS_6368 */
+ mask = CKCTL_6368_SPI_EN;
bcm_hwclock_set(mask, enable);
}
@@ -199,7 +201,7 @@ static void xtm_set(struct clk *clk, int enable)
if (!BCMCPU_IS_6368())
return;
- bcm_hwclock_set(CKCTL_6368_SAR_CLK_EN |
+ bcm_hwclock_set(CKCTL_6368_SAR_EN |
CKCTL_6368_SWPKT_SAR_EN, enable);
if (enable) {
@@ -222,6 +224,18 @@ static struct clk clk_xtm = {
};
/*
+ * IPsec clock
+ */
+static void ipsec_set(struct clk *clk, int enable)
+{
+ bcm_hwclock_set(CKCTL_6368_IPSEC_EN, enable);
+}
+
+static struct clk clk_ipsec = {
+ .set = ipsec_set,
+};
+
+/*
* Internal peripheral clock
*/
static struct clk clk_periph = {
@@ -278,6 +292,8 @@ struct clk *clk_get(struct device *dev, const char *id)
return &clk_periph;
if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
return &clk_pcm;
+ if (BCMCPU_IS_6368() && !strcmp(id, "ipsec"))
+ return &clk_ipsec;
return ERR_PTR(-ENOENT);
}
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index 8f0d6c7725e..a7afb289b15 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -29,6 +29,14 @@ static u16 bcm63xx_cpu_rev;
static unsigned int bcm63xx_cpu_freq;
static unsigned int bcm63xx_memory_size;
+static const unsigned long bcm6328_regs_base[] = {
+ __GEN_CPU_REGS_TABLE(6328)
+};
+
+static const int bcm6328_irqs[] = {
+ __GEN_CPU_IRQ_TABLE(6328)
+};
+
static const unsigned long bcm6338_regs_base[] = {
__GEN_CPU_REGS_TABLE(6338)
};
@@ -99,6 +107,33 @@ unsigned int bcm63xx_get_memory_size(void)
static unsigned int detect_cpu_clock(void)
{
switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ {
+ unsigned int tmp, mips_pll_fcvo;
+
+ tmp = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
+ mips_pll_fcvo = (tmp & STRAPBUS_6328_FCVO_MASK)
+ >> STRAPBUS_6328_FCVO_SHIFT;
+
+ switch (mips_pll_fcvo) {
+ case 0x12:
+ case 0x14:
+ case 0x19:
+ return 160000000;
+ case 0x1c:
+ return 192000000;
+ case 0x13:
+ case 0x15:
+ return 200000000;
+ case 0x1a:
+ return 384000000;
+ case 0x16:
+ return 400000000;
+ default:
+ return 320000000;
+ }
+
+ }
case BCM6338_CPU_ID:
/* BCM6338 has a fixed 240 Mhz frequency */
return 240000000;
@@ -170,6 +205,9 @@ static unsigned int detect_memory_size(void)
unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
u32 val;
+ if (BCMCPU_IS_6328())
+ return bcm_ddr_readl(DDR_CSEND_REG) << 24;
+
if (BCMCPU_IS_6345()) {
val = bcm_sdram_readl(SDRAM_MBASE_REG);
return (val * 8 * 1024 * 1024);
@@ -228,17 +266,26 @@ void __init bcm63xx_cpu_init(void)
bcm63xx_irqs = bcm6345_irqs;
break;
case CPU_BMIPS4350:
- switch (read_c0_prid() & 0xf0) {
- case 0x10:
+ if ((read_c0_prid() & 0xf0) == 0x10) {
expected_cpu_id = BCM6358_CPU_ID;
bcm63xx_regs_base = bcm6358_regs_base;
bcm63xx_irqs = bcm6358_irqs;
- break;
- case 0x30:
- expected_cpu_id = BCM6368_CPU_ID;
- bcm63xx_regs_base = bcm6368_regs_base;
- bcm63xx_irqs = bcm6368_irqs;
- break;
+ } else {
+ /* all newer chips have the same chip id location */
+ u16 chip_id = bcm_readw(BCM_6368_PERF_BASE);
+
+ switch (chip_id) {
+ case BCM6328_CPU_ID:
+ expected_cpu_id = BCM6328_CPU_ID;
+ bcm63xx_regs_base = bcm6328_regs_base;
+ bcm63xx_irqs = bcm6328_irqs;
+ break;
+ case BCM6368_CPU_ID:
+ expected_cpu_id = BCM6368_CPU_ID;
+ bcm63xx_regs_base = bcm6368_regs_base;
+ bcm63xx_irqs = bcm6368_irqs;
+ break;
+ }
}
break;
}
diff --git a/arch/mips/bcm63xx/dev-dsp.c b/arch/mips/bcm63xx/dev-dsp.c
index da46d1d3c77..5bb5b154c9b 100644
--- a/arch/mips/bcm63xx/dev-dsp.c
+++ b/arch/mips/bcm63xx/dev-dsp.c
@@ -31,7 +31,7 @@ static struct resource voip_dsp_resources[] = {
static struct platform_device bcm63xx_voip_dsp_device = {
.name = "bcm63xx-voip-dsp",
- .id = 0,
+ .id = -1,
.num_resources = ARRAY_SIZE(voip_dsp_resources),
.resource = voip_dsp_resources,
};
diff --git a/arch/mips/bcm63xx/dev-flash.c b/arch/mips/bcm63xx/dev-flash.c
new file mode 100644
index 00000000000..58371c7deac
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-flash.c
@@ -0,0 +1,123 @@
+/*
+ * Broadcom BCM63xx flash registration
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_flash.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+static struct mtd_partition mtd_partitions[] = {
+ {
+ .name = "cfe",
+ .offset = 0x0,
+ .size = 0x40000,
+ }
+};
+
+static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
+
+static struct physmap_flash_data flash_data = {
+ .width = 2,
+ .parts = mtd_partitions,
+ .part_probe_types = bcm63xx_part_types,
+};
+
+static struct resource mtd_resources[] = {
+ {
+ .start = 0, /* filled at runtime */
+ .end = 0, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device mtd_dev = {
+ .name = "physmap-flash",
+ .resource = mtd_resources,
+ .num_resources = ARRAY_SIZE(mtd_resources),
+ .dev = {
+ .platform_data = &flash_data,
+ },
+};
+
+static int __init bcm63xx_detect_flash_type(void)
+{
+ u32 val;
+
+ switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
+ if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
+ return BCM63XX_FLASH_TYPE_SERIAL;
+ else
+ return BCM63XX_FLASH_TYPE_NAND;
+ case BCM6338_CPU_ID:
+ case BCM6345_CPU_ID:
+ case BCM6348_CPU_ID:
+ /* no way to auto detect so assume parallel */
+ return BCM63XX_FLASH_TYPE_PARALLEL;
+ case BCM6358_CPU_ID:
+ val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
+ if (val & STRAPBUS_6358_BOOT_SEL_PARALLEL)
+ return BCM63XX_FLASH_TYPE_PARALLEL;
+ else
+ return BCM63XX_FLASH_TYPE_SERIAL;
+ case BCM6368_CPU_ID:
+ val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
+ switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
+ case STRAPBUS_6368_BOOT_SEL_NAND:
+ return BCM63XX_FLASH_TYPE_NAND;
+ case STRAPBUS_6368_BOOT_SEL_SERIAL:
+ return BCM63XX_FLASH_TYPE_SERIAL;
+ case STRAPBUS_6368_BOOT_SEL_PARALLEL:
+ return BCM63XX_FLASH_TYPE_PARALLEL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+int __init bcm63xx_flash_register(void)
+{
+ int flash_type;
+ u32 val;
+
+ flash_type = bcm63xx_detect_flash_type();
+
+ switch (flash_type) {
+ case BCM63XX_FLASH_TYPE_PARALLEL:
+ /* read base address of boot chip select (0) */
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
+
+ mtd_resources[0].start = val;
+ mtd_resources[0].end = 0x1FFFFFFF;
+
+ return platform_device_register(&mtd_dev);
+ case BCM63XX_FLASH_TYPE_SERIAL:
+ pr_warn("unsupported serial flash detected\n");
+ return -ENODEV;
+ case BCM63XX_FLASH_TYPE_NAND:
+ pr_warn("unsupported NAND flash detected\n");
+ return -ENODEV;
+ default:
+ pr_err("flash detection failed for BCM%x: %d\n",
+ bcm63xx_get_cpu_id(), flash_type);
+ return -ENODEV;
+ }
+}
diff --git a/arch/mips/bcm63xx/dev-rng.c b/arch/mips/bcm63xx/dev-rng.c
new file mode 100644
index 00000000000..d277b4dc6c6
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-rng.c
@@ -0,0 +1,40 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cpu.h>
+
+static struct resource rng_resources[] = {
+ {
+ .start = -1, /* filled at runtime */
+ .end = -1, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bcm63xx_rng_device = {
+ .name = "bcm63xx-rng",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rng_resources),
+ .resource = rng_resources,
+};
+
+int __init bcm63xx_rng_register(void)
+{
+ if (!BCMCPU_IS_6368())
+ return -ENODEV;
+
+ rng_resources[0].start = bcm63xx_regset_address(RSET_RNG);
+ rng_resources[0].end = rng_resources[0].start;
+ rng_resources[0].end += RSET_RNG_SIZE - 1;
+
+ return platform_device_register(&bcm63xx_rng_device);
+}
+arch_initcall(bcm63xx_rng_register);
diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c
new file mode 100644
index 00000000000..e39f73048d4
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-spi.c
@@ -0,0 +1,119 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_spi.h>
+#include <bcm63xx_regs.h>
+
+#ifdef BCMCPU_RUNTIME_DETECT
+/*
+ * register offsets
+ */
+static const unsigned long bcm6338_regs_spi[] = {
+ __GEN_SPI_REGS_TABLE(6338)
+};
+
+static const unsigned long bcm6348_regs_spi[] = {
+ __GEN_SPI_REGS_TABLE(6348)
+};
+
+static const unsigned long bcm6358_regs_spi[] = {
+ __GEN_SPI_REGS_TABLE(6358)
+};
+
+static const unsigned long bcm6368_regs_spi[] = {
+ __GEN_SPI_REGS_TABLE(6368)
+};
+
+const unsigned long *bcm63xx_regs_spi;
+EXPORT_SYMBOL(bcm63xx_regs_spi);
+
+static __init void bcm63xx_spi_regs_init(void)
+{
+ if (BCMCPU_IS_6338())
+ bcm63xx_regs_spi = bcm6338_regs_spi;
+ if (BCMCPU_IS_6348())
+ bcm63xx_regs_spi = bcm6348_regs_spi;
+ if (BCMCPU_IS_6358())
+ bcm63xx_regs_spi = bcm6358_regs_spi;
+ if (BCMCPU_IS_6368())
+ bcm63xx_regs_spi = bcm6368_regs_spi;
+}
+#else
+static __init void bcm63xx_spi_regs_init(void) { }
+#endif
+
+static struct resource spi_resources[] = {
+ {
+ .start = -1, /* filled at runtime */
+ .end = -1, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = -1, /* filled at runtime */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct bcm63xx_spi_pdata spi_pdata = {
+ .bus_num = 0,
+ .num_chipselect = 8,
+};
+
+static struct platform_device bcm63xx_spi_device = {
+ .name = "bcm63xx-spi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(spi_resources),
+ .resource = spi_resources,
+ .dev = {
+ .platform_data = &spi_pdata,
+ },
+};
+
+int __init bcm63xx_spi_register(void)
+{
+ struct clk *periph_clk;
+
+ if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
+ return -ENODEV;
+
+ periph_clk = clk_get(NULL, "periph");
+ if (IS_ERR(periph_clk)) {
+ pr_err("unable to get periph clock\n");
+ return -ENODEV;
+ }
+
+ /* Set bus frequency */
+ spi_pdata.speed_hz = clk_get_rate(periph_clk);
+
+ spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
+ spi_resources[0].end = spi_resources[0].start;
+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
+
+ if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
+ spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1;
+ spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE;
+ }
+
+ if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
+ spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
+ spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
+ }
+
+ bcm63xx_spi_regs_init();
+
+ return platform_device_register(&bcm63xx_spi_device);
+}
diff --git a/arch/mips/bcm63xx/dev-wdt.c b/arch/mips/bcm63xx/dev-wdt.c
index 3e6c716a4c1..2a2346a99bc 100644
--- a/arch/mips/bcm63xx/dev-wdt.c
+++ b/arch/mips/bcm63xx/dev-wdt.c
@@ -21,7 +21,7 @@ static struct resource wdt_resources[] = {
static struct platform_device bcm63xx_wdt_device = {
.name = "bcm63xx-wdt",
- .id = 0,
+ .id = -1,
.num_resources = ARRAY_SIZE(wdt_resources),
.resource = wdt_resources,
};
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
index 9a216a451d9..18e051ad18a 100644
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
@@ -27,6 +27,17 @@ static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
#ifndef BCMCPU_RUNTIME_DETECT
+#ifdef CONFIG_BCM63XX_CPU_6328
+#define irq_stat_reg PERF_IRQSTAT_6328_REG
+#define irq_mask_reg PERF_IRQMASK_6328_REG
+#define irq_bits 64
+#define is_ext_irq_cascaded 1
+#define ext_irq_start (BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+#define ext_irq_end (BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE)
+#define ext_irq_count 4
+#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6328
+#define ext_irq_cfg_reg2 0
+#endif
#ifdef CONFIG_BCM63XX_CPU_6338
#define irq_stat_reg PERF_IRQSTAT_6338_REG
#define irq_mask_reg PERF_IRQMASK_6338_REG
@@ -118,6 +129,16 @@ static void bcm63xx_init_irq(void)
irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ irq_stat_addr += PERF_IRQSTAT_6328_REG;
+ irq_mask_addr += PERF_IRQMASK_6328_REG;
+ irq_bits = 64;
+ ext_irq_count = 4;
+ is_ext_irq_cascaded = 1;
+ ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+ ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
+ break;
case BCM6338_CPU_ID:
irq_stat_addr += PERF_IRQSTAT_6338_REG;
irq_mask_addr += PERF_IRQMASK_6338_REG;
diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
index 99d7f405cbe..10eaff45807 100644
--- a/arch/mips/bcm63xx/prom.c
+++ b/arch/mips/bcm63xx/prom.c
@@ -26,7 +26,9 @@ void __init prom_init(void)
bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);
/* disable all hardware blocks clock for now */
- if (BCMCPU_IS_6338())
+ if (BCMCPU_IS_6328())
+ mask = CKCTL_6328_ALL_SAFE_EN;
+ else if (BCMCPU_IS_6338())
mask = CKCTL_6338_ALL_SAFE_EN;
else if (BCMCPU_IS_6345())
mask = CKCTL_6345_ALL_SAFE_EN;
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index 356b05583e1..0e74a13639c 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -68,6 +68,9 @@ void bcm63xx_machine_reboot(void)
/* mask and clear all external irq */
switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
+ break;
case BCM6338_CPU_ID:
perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338;
break;
@@ -95,9 +98,13 @@ void bcm63xx_machine_reboot(void)
bcm6348_a1_reboot();
printk(KERN_INFO "triggering watchdog soft-reset...\n");
- reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
- reg |= SYS_PLL_SOFT_RESET;
- bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
+ if (BCMCPU_IS_6328()) {
+ bcm_wdt_writel(1, WDT_SOFTRESET_REG);
+ } else {
+ reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
+ reg |= SYS_PLL_SOFT_RESET;
+ bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
+ }
while (1)
;
}
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 5042d51b051..c2a3fb0ffc8 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -58,8 +58,12 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
# Calculate the load address of the compressed kernel image
hostprogs-y := calc_vmlinuz_load_addr
+ifeq ($(CONFIG_MACH_JZ4740),y)
+VMLINUZ_LOAD_ADDRESS := 0x80600000
+else
VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
$(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
+endif
vmlinuzobjs-y += $(obj)/piggy.o
diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c
index c9caaf4fbf6..1c7b739b6a1 100644
--- a/arch/mips/boot/compressed/uart-16550.c
+++ b/arch/mips/boot/compressed/uart-16550.c
@@ -18,6 +18,11 @@
#define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
#endif
+#ifdef CONFIG_MACH_JZ4740
+#define UART0_BASE 0xB0030000
+#define PORT(offset) (UART0_BASE + (4 * offset))
+#endif
+
#ifndef PORT
#error please define the serial port address for your own machine
#endif
diff --git a/arch/mips/cavium-octeon/octeon-memcpy.S b/arch/mips/cavium-octeon/octeon-memcpy.S
index 88e0cddca20..db478dbb9c7 100644
--- a/arch/mips/cavium-octeon/octeon-memcpy.S
+++ b/arch/mips/cavium-octeon/octeon-memcpy.S
@@ -164,6 +164,14 @@
.set noat
/*
+ * t7 is used as a flag to note inatomic mode.
+ */
+LEAF(__copy_user_inatomic)
+ b __copy_user_common
+ li t7, 1
+ END(__copy_user_inatomic)
+
+/*
* A combined memcpy/__copy_user
* __copy_user sets len to 0 for success; else to an upper bound of
* the number of uncopied bytes.
@@ -174,6 +182,8 @@ LEAF(memcpy) /* a0=dst a1=src a2=len */
move v0, dst /* return value */
__memcpy:
FEXPORT(__copy_user)
+ li t7, 0 /* not inatomic */
+__copy_user_common:
/*
* Note: dst & src may be unaligned, len may be 0
* Temps
@@ -412,7 +422,6 @@ l_exc_copy:
* Assumes src < THREAD_BUADDR($28)
*/
LOAD t0, TI_TASK($28)
- nop
LOAD t0, THREAD_BUADDR(t0)
1:
EXC( lb t1, 0(src), l_exc)
@@ -422,10 +431,9 @@ EXC( lb t1, 0(src), l_exc)
ADD dst, dst, 1
l_exc:
LOAD t0, TI_TASK($28)
- nop
LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address
- nop
SUB len, AT, t0 # len number of uncopied bytes
+ bnez t7, 2f /* Skip the zeroing out part if inatomic */
/*
* Here's where we rely on src and dst being incremented in tandem,
* See (3) above.
@@ -443,7 +451,7 @@ l_exc:
ADD dst, dst, 1
bnez src, 1b
SUB src, src, 1
- jr ra
+2: jr ra
nop
diff --git a/arch/mips/configs/ls1b_defconfig b/arch/mips/configs/ls1b_defconfig
new file mode 100644
index 00000000000..80cff8bea8e
--- /dev/null
+++ b/arch/mips/configs/ls1b_defconfig
@@ -0,0 +1,109 @@
+CONFIG_MACH_LOONGSON1=y
+CONFIG_PREEMPT=y
+# CONFIG_SECCOMP is not set
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_EXPERT=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=m
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_DA=y
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_USB_HID=m
+CONFIG_HID_GENERIC=m
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_STORAGE=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_LOONGSON1=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig
index d0b857d98c9..138f698d7c0 100644
--- a/arch/mips/configs/nlm_xlr_defconfig
+++ b/arch/mips/configs/nlm_xlr_defconfig
@@ -367,6 +367,10 @@ CONFIG_SERIAL_8250_RSA=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_RAW_DRIVER=m
+CONFIG_I2C=y
+CONFIG_I2C_XLR=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1374=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index e95ff3054ff..8c62316f22f 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -101,7 +101,7 @@ void __init prom_free_prom_memory(void)
* the first page reserved for the exception handlers.
*/
-#if defined(CONFIG_DECLANCE) || defined(CONFIG_DECLANCE_MODULE)
+#if IS_ENABLED(CONFIG_DECLANCE)
/*
* Leave 128 KB reserved for Lance memory for
* IOASIC DECstations.
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 95e40c1e8ed..f21b7c04e95 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -197,6 +197,7 @@
#define PRID_REV_VR4181A 0x0070 /* Same as VR4122 */
#define PRID_REV_VR4130 0x0080
#define PRID_REV_34K_V1_0_2 0x0022
+#define PRID_REV_LOONGSON1B 0x0020
#define PRID_REV_LOONGSON2E 0x0002
#define PRID_REV_LOONGSON2F 0x0003
@@ -261,7 +262,7 @@ enum cpu_type_enum {
*/
CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
- CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_M14KC,
+ CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_LOONGSON1, CPU_M14KC,
/*
* MIPS64 class processors
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
index 5b8d15bb5fe..e104ddb694a 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -9,6 +9,7 @@
* compile time if only one CPU support is enabled (idea stolen from
* arm mach-types)
*/
+#define BCM6328_CPU_ID 0x6328
#define BCM6338_CPU_ID 0x6338
#define BCM6345_CPU_ID 0x6345
#define BCM6348_CPU_ID 0x6348
@@ -20,6 +21,19 @@ u16 __bcm63xx_get_cpu_id(void);
u16 bcm63xx_get_cpu_rev(void);
unsigned int bcm63xx_get_cpu_freq(void);
+#ifdef CONFIG_BCM63XX_CPU_6328
+# ifdef bcm63xx_get_cpu_id
+# undef bcm63xx_get_cpu_id
+# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
+# define BCMCPU_RUNTIME_DETECT
+# else
+# define bcm63xx_get_cpu_id() BCM6328_CPU_ID
+# endif
+# define BCMCPU_IS_6328() (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
+#else
+# define BCMCPU_IS_6328() (0)
+#endif
+
#ifdef CONFIG_BCM63XX_CPU_6338
# ifdef bcm63xx_get_cpu_id
# undef bcm63xx_get_cpu_id
@@ -102,13 +116,13 @@ enum bcm63xx_regs_set {
RSET_UART1,
RSET_GPIO,
RSET_SPI,
- RSET_SPI2,
RSET_UDC0,
RSET_OHCI0,
RSET_OHCI_PRIV,
RSET_USBH_PRIV,
RSET_MPI,
RSET_PCMCIA,
+ RSET_PCIE,
RSET_DSL,
RSET_ENET0,
RSET_ENET1,
@@ -130,11 +144,17 @@ enum bcm63xx_regs_set {
RSET_PCMDMA,
RSET_PCMDMAC,
RSET_PCMDMAS,
+ RSET_RNG,
+ RSET_MISC
};
#define RSET_DSL_LMEM_SIZE (64 * 1024 * 4)
#define RSET_DSL_SIZE 4096
#define RSET_WDT_SIZE 12
+#define BCM_6338_RSET_SPI_SIZE 64
+#define BCM_6348_RSET_SPI_SIZE 64
+#define BCM_6358_RSET_SPI_SIZE 1804
+#define BCM_6368_RSET_SPI_SIZE 1804
#define RSET_ENET_SIZE 2048
#define RSET_ENETDMA_SIZE 2048
#define RSET_ENETSW_SIZE 65536
@@ -149,8 +169,53 @@ enum bcm63xx_regs_set {
#define RSET_XTMDMA_SIZE 256
#define RSET_XTMDMAC_SIZE(chans) (16 * (chans))
#define RSET_XTMDMAS_SIZE(chans) (16 * (chans))
+#define RSET_RNG_SIZE 20
/*
+ * 6328 register sets base address
+ */
+#define BCM_6328_DSL_LMEM_BASE (0xdeadbeef)
+#define BCM_6328_PERF_BASE (0xb0000000)
+#define BCM_6328_TIMER_BASE (0xb0000040)
+#define BCM_6328_WDT_BASE (0xb000005c)
+#define BCM_6328_UART0_BASE (0xb0000100)
+#define BCM_6328_UART1_BASE (0xb0000120)
+#define BCM_6328_GPIO_BASE (0xb0000080)
+#define BCM_6328_SPI_BASE (0xdeadbeef)
+#define BCM_6328_UDC0_BASE (0xdeadbeef)
+#define BCM_6328_USBDMA_BASE (0xdeadbeef)
+#define BCM_6328_OHCI0_BASE (0xdeadbeef)
+#define BCM_6328_OHCI_PRIV_BASE (0xdeadbeef)
+#define BCM_6328_USBH_PRIV_BASE (0xdeadbeef)
+#define BCM_6328_MPI_BASE (0xdeadbeef)
+#define BCM_6328_PCMCIA_BASE (0xdeadbeef)
+#define BCM_6328_PCIE_BASE (0xb0e40000)
+#define BCM_6328_SDRAM_REGS_BASE (0xdeadbeef)
+#define BCM_6328_DSL_BASE (0xb0001900)
+#define BCM_6328_UBUS_BASE (0xdeadbeef)
+#define BCM_6328_ENET0_BASE (0xdeadbeef)
+#define BCM_6328_ENET1_BASE (0xdeadbeef)
+#define BCM_6328_ENETDMA_BASE (0xb000d800)
+#define BCM_6328_ENETDMAC_BASE (0xb000da00)
+#define BCM_6328_ENETDMAS_BASE (0xb000dc00)
+#define BCM_6328_ENETSW_BASE (0xb0e00000)
+#define BCM_6328_EHCI0_BASE (0x10002500)
+#define BCM_6328_SDRAM_BASE (0xdeadbeef)
+#define BCM_6328_MEMC_BASE (0xdeadbeef)
+#define BCM_6328_DDR_BASE (0xb0003000)
+#define BCM_6328_M2M_BASE (0xdeadbeef)
+#define BCM_6328_ATM_BASE (0xdeadbeef)
+#define BCM_6328_XTM_BASE (0xdeadbeef)
+#define BCM_6328_XTMDMA_BASE (0xb000b800)
+#define BCM_6328_XTMDMAC_BASE (0xdeadbeef)
+#define BCM_6328_XTMDMAS_BASE (0xdeadbeef)
+#define BCM_6328_PCM_BASE (0xb000a800)
+#define BCM_6328_PCMDMA_BASE (0xdeadbeef)
+#define BCM_6328_PCMDMAC_BASE (0xdeadbeef)
+#define BCM_6328_PCMDMAS_BASE (0xdeadbeef)
+#define BCM_6328_RNG_BASE (0xdeadbeef)
+#define BCM_6328_MISC_BASE (0xb0001800)
+/*
* 6338 register sets base address
*/
#define BCM_6338_DSL_LMEM_BASE (0xfff00000)
@@ -162,7 +227,6 @@ enum bcm63xx_regs_set {
#define BCM_6338_UART1_BASE (0xdeadbeef)
#define BCM_6338_GPIO_BASE (0xfffe0400)
#define BCM_6338_SPI_BASE (0xfffe0c00)
-#define BCM_6338_SPI2_BASE (0xdeadbeef)
#define BCM_6338_UDC0_BASE (0xdeadbeef)
#define BCM_6338_USBDMA_BASE (0xfffe2400)
#define BCM_6338_OHCI0_BASE (0xdeadbeef)
@@ -170,6 +234,7 @@ enum bcm63xx_regs_set {
#define BCM_6338_USBH_PRIV_BASE (0xdeadbeef)
#define BCM_6338_MPI_BASE (0xfffe3160)
#define BCM_6338_PCMCIA_BASE (0xdeadbeef)
+#define BCM_6338_PCIE_BASE (0xdeadbeef)
#define BCM_6338_SDRAM_REGS_BASE (0xfffe3100)
#define BCM_6338_DSL_BASE (0xfffe1000)
#define BCM_6338_UBUS_BASE (0xdeadbeef)
@@ -193,6 +258,8 @@ enum bcm63xx_regs_set {
#define BCM_6338_PCMDMA_BASE (0xdeadbeef)
#define BCM_6338_PCMDMAC_BASE (0xdeadbeef)
#define BCM_6338_PCMDMAS_BASE (0xdeadbeef)
+#define BCM_6338_RNG_BASE (0xdeadbeef)
+#define BCM_6338_MISC_BASE (0xdeadbeef)
/*
* 6345 register sets base address
@@ -206,7 +273,6 @@ enum bcm63xx_regs_set {
#define BCM_6345_UART1_BASE (0xdeadbeef)
#define BCM_6345_GPIO_BASE (0xfffe0400)
#define BCM_6345_SPI_BASE (0xdeadbeef)
-#define BCM_6345_SPI2_BASE (0xdeadbeef)
#define BCM_6345_UDC0_BASE (0xdeadbeef)
#define BCM_6345_USBDMA_BASE (0xfffe2800)
#define BCM_6345_ENET0_BASE (0xfffe1800)
@@ -216,6 +282,7 @@ enum bcm63xx_regs_set {
#define BCM_6345_ENETSW_BASE (0xdeadbeef)
#define BCM_6345_PCMCIA_BASE (0xfffe2028)
#define BCM_6345_MPI_BASE (0xfffe2000)
+#define BCM_6345_PCIE_BASE (0xdeadbeef)
#define BCM_6345_OHCI0_BASE (0xfffe2100)
#define BCM_6345_OHCI_PRIV_BASE (0xfffe2200)
#define BCM_6345_USBH_PRIV_BASE (0xdeadbeef)
@@ -237,6 +304,8 @@ enum bcm63xx_regs_set {
#define BCM_6345_PCMDMA_BASE (0xdeadbeef)
#define BCM_6345_PCMDMAC_BASE (0xdeadbeef)
#define BCM_6345_PCMDMAS_BASE (0xdeadbeef)
+#define BCM_6345_RNG_BASE (0xdeadbeef)
+#define BCM_6345_MISC_BASE (0xdeadbeef)
/*
* 6348 register sets base address
@@ -249,13 +318,13 @@ enum bcm63xx_regs_set {
#define BCM_6348_UART1_BASE (0xdeadbeef)
#define BCM_6348_GPIO_BASE (0xfffe0400)
#define BCM_6348_SPI_BASE (0xfffe0c00)
-#define BCM_6348_SPI2_BASE (0xdeadbeef)
#define BCM_6348_UDC0_BASE (0xfffe1000)
#define BCM_6348_OHCI0_BASE (0xfffe1b00)
#define BCM_6348_OHCI_PRIV_BASE (0xfffe1c00)
#define BCM_6348_USBH_PRIV_BASE (0xdeadbeef)
#define BCM_6348_MPI_BASE (0xfffe2000)
#define BCM_6348_PCMCIA_BASE (0xfffe2054)
+#define BCM_6348_PCIE_BASE (0xdeadbeef)
#define BCM_6348_SDRAM_REGS_BASE (0xfffe2300)
#define BCM_6348_M2M_BASE (0xfffe2800)
#define BCM_6348_DSL_BASE (0xfffe3000)
@@ -278,6 +347,8 @@ enum bcm63xx_regs_set {
#define BCM_6348_PCMDMA_BASE (0xdeadbeef)
#define BCM_6348_PCMDMAC_BASE (0xdeadbeef)
#define BCM_6348_PCMDMAS_BASE (0xdeadbeef)
+#define BCM_6348_RNG_BASE (0xdeadbeef)
+#define BCM_6348_MISC_BASE (0xdeadbeef)
/*
* 6358 register sets base address
@@ -289,14 +360,14 @@ enum bcm63xx_regs_set {
#define BCM_6358_UART0_BASE (0xfffe0100)
#define BCM_6358_UART1_BASE (0xfffe0120)
#define BCM_6358_GPIO_BASE (0xfffe0080)
-#define BCM_6358_SPI_BASE (0xdeadbeef)
-#define BCM_6358_SPI2_BASE (0xfffe0800)
+#define BCM_6358_SPI_BASE (0xfffe0800)
#define BCM_6358_UDC0_BASE (0xfffe0800)
#define BCM_6358_OHCI0_BASE (0xfffe1400)
#define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef)
#define BCM_6358_USBH_PRIV_BASE (0xfffe1500)
#define BCM_6358_MPI_BASE (0xfffe1000)
#define BCM_6358_PCMCIA_BASE (0xfffe1054)
+#define BCM_6358_PCIE_BASE (0xdeadbeef)
#define BCM_6358_SDRAM_REGS_BASE (0xfffe2300)
#define BCM_6358_M2M_BASE (0xdeadbeef)
#define BCM_6358_DSL_BASE (0xfffe3000)
@@ -319,6 +390,8 @@ enum bcm63xx_regs_set {
#define BCM_6358_PCMDMA_BASE (0xfffe1800)
#define BCM_6358_PCMDMAC_BASE (0xfffe1900)
#define BCM_6358_PCMDMAS_BASE (0xfffe1a00)
+#define BCM_6358_RNG_BASE (0xdeadbeef)
+#define BCM_6358_MISC_BASE (0xdeadbeef)
/*
@@ -331,14 +404,14 @@ enum bcm63xx_regs_set {
#define BCM_6368_UART0_BASE (0xb0000100)
#define BCM_6368_UART1_BASE (0xb0000120)
#define BCM_6368_GPIO_BASE (0xb0000080)
-#define BCM_6368_SPI_BASE (0xdeadbeef)
-#define BCM_6368_SPI2_BASE (0xb0000800)
+#define BCM_6368_SPI_BASE (0xb0000800)
#define BCM_6368_UDC0_BASE (0xdeadbeef)
#define BCM_6368_OHCI0_BASE (0xb0001600)
#define BCM_6368_OHCI_PRIV_BASE (0xdeadbeef)
#define BCM_6368_USBH_PRIV_BASE (0xb0001700)
#define BCM_6368_MPI_BASE (0xb0001000)
#define BCM_6368_PCMCIA_BASE (0xb0001054)
+#define BCM_6368_PCIE_BASE (0xdeadbeef)
#define BCM_6368_SDRAM_REGS_BASE (0xdeadbeef)
#define BCM_6368_M2M_BASE (0xdeadbeef)
#define BCM_6368_DSL_BASE (0xdeadbeef)
@@ -361,6 +434,8 @@ enum bcm63xx_regs_set {
#define BCM_6368_PCMDMA_BASE (0xb0005800)
#define BCM_6368_PCMDMAC_BASE (0xb0005a00)
#define BCM_6368_PCMDMAS_BASE (0xb0005c00)
+#define BCM_6368_RNG_BASE (0xb0004180)
+#define BCM_6368_MISC_BASE (0xdeadbeef)
extern const unsigned long *bcm63xx_regs_base;
@@ -379,13 +454,13 @@ extern const unsigned long *bcm63xx_regs_base;
__GEN_RSET_BASE(__cpu, UART1) \
__GEN_RSET_BASE(__cpu, GPIO) \
__GEN_RSET_BASE(__cpu, SPI) \
- __GEN_RSET_BASE(__cpu, SPI2) \
__GEN_RSET_BASE(__cpu, UDC0) \
__GEN_RSET_BASE(__cpu, OHCI0) \
__GEN_RSET_BASE(__cpu, OHCI_PRIV) \
__GEN_RSET_BASE(__cpu, USBH_PRIV) \
__GEN_RSET_BASE(__cpu, MPI) \
__GEN_RSET_BASE(__cpu, PCMCIA) \
+ __GEN_RSET_BASE(__cpu, PCIE) \
__GEN_RSET_BASE(__cpu, DSL) \
__GEN_RSET_BASE(__cpu, ENET0) \
__GEN_RSET_BASE(__cpu, ENET1) \
@@ -407,6 +482,8 @@ extern const unsigned long *bcm63xx_regs_base;
__GEN_RSET_BASE(__cpu, PCMDMA) \
__GEN_RSET_BASE(__cpu, PCMDMAC) \
__GEN_RSET_BASE(__cpu, PCMDMAS) \
+ __GEN_RSET_BASE(__cpu, RNG) \
+ __GEN_RSET_BASE(__cpu, MISC) \
}
#define __GEN_CPU_REGS_TABLE(__cpu) \
@@ -418,13 +495,13 @@ extern const unsigned long *bcm63xx_regs_base;
[RSET_UART1] = BCM_## __cpu ##_UART1_BASE, \
[RSET_GPIO] = BCM_## __cpu ##_GPIO_BASE, \
[RSET_SPI] = BCM_## __cpu ##_SPI_BASE, \
- [RSET_SPI2] = BCM_## __cpu ##_SPI2_BASE, \
[RSET_UDC0] = BCM_## __cpu ##_UDC0_BASE, \
[RSET_OHCI0] = BCM_## __cpu ##_OHCI0_BASE, \
[RSET_OHCI_PRIV] = BCM_## __cpu ##_OHCI_PRIV_BASE, \
[RSET_USBH_PRIV] = BCM_## __cpu ##_USBH_PRIV_BASE, \
[RSET_MPI] = BCM_## __cpu ##_MPI_BASE, \
[RSET_PCMCIA] = BCM_## __cpu ##_PCMCIA_BASE, \
+ [RSET_PCIE] = BCM_## __cpu ##_PCIE_BASE, \
[RSET_DSL] = BCM_## __cpu ##_DSL_BASE, \
[RSET_ENET0] = BCM_## __cpu ##_ENET0_BASE, \
[RSET_ENET1] = BCM_## __cpu ##_ENET1_BASE, \
@@ -446,6 +523,8 @@ extern const unsigned long *bcm63xx_regs_base;
[RSET_PCMDMA] = BCM_## __cpu ##_PCMDMA_BASE, \
[RSET_PCMDMAC] = BCM_## __cpu ##_PCMDMAC_BASE, \
[RSET_PCMDMAS] = BCM_## __cpu ##_PCMDMAS_BASE, \
+ [RSET_RNG] = BCM_## __cpu ##_RNG_BASE, \
+ [RSET_MISC] = BCM_## __cpu ##_MISC_BASE, \
static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
@@ -453,6 +532,9 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
#ifdef BCMCPU_RUNTIME_DETECT
return bcm63xx_regs_base[set];
#else
+#ifdef CONFIG_BCM63XX_CPU_6328
+ __GEN_RSET(6328)
+#endif
#ifdef CONFIG_BCM63XX_CPU_6338
__GEN_RSET(6338)
#endif
@@ -478,6 +560,7 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
*/
enum bcm63xx_irq {
IRQ_TIMER = 0,
+ IRQ_SPI,
IRQ_UART0,
IRQ_UART1,
IRQ_DSL,
@@ -506,9 +589,51 @@ enum bcm63xx_irq {
};
/*
+ * 6328 irqs
+ */
+#define BCM_6328_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32)
+
+#define BCM_6328_TIMER_IRQ (IRQ_INTERNAL_BASE + 31)
+#define BCM_6328_SPI_IRQ 0
+#define BCM_6328_UART0_IRQ (IRQ_INTERNAL_BASE + 28)
+#define BCM_6328_UART1_IRQ (BCM_6328_HIGH_IRQ_BASE + 7)
+#define BCM_6328_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
+#define BCM_6328_UDC0_IRQ 0
+#define BCM_6328_ENET0_IRQ 0
+#define BCM_6328_ENET1_IRQ 0
+#define BCM_6328_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
+#define BCM_6328_OHCI0_IRQ (IRQ_INTERNAL_BASE + 9)
+#define BCM_6328_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10)
+#define BCM_6328_PCMCIA_IRQ 0
+#define BCM_6328_ENET0_RXDMA_IRQ 0
+#define BCM_6328_ENET0_TXDMA_IRQ 0
+#define BCM_6328_ENET1_RXDMA_IRQ 0
+#define BCM_6328_ENET1_TXDMA_IRQ 0
+#define BCM_6328_PCI_IRQ (IRQ_INTERNAL_BASE + 23)
+#define BCM_6328_ATM_IRQ 0
+#define BCM_6328_ENETSW_RXDMA0_IRQ (BCM_6328_HIGH_IRQ_BASE + 0)
+#define BCM_6328_ENETSW_RXDMA1_IRQ (BCM_6328_HIGH_IRQ_BASE + 1)
+#define BCM_6328_ENETSW_RXDMA2_IRQ (BCM_6328_HIGH_IRQ_BASE + 2)
+#define BCM_6328_ENETSW_RXDMA3_IRQ (BCM_6328_HIGH_IRQ_BASE + 3)
+#define BCM_6328_ENETSW_TXDMA0_IRQ (BCM_6328_HIGH_IRQ_BASE + 4)
+#define BCM_6328_ENETSW_TXDMA1_IRQ (BCM_6328_HIGH_IRQ_BASE + 5)
+#define BCM_6328_ENETSW_TXDMA2_IRQ (BCM_6328_HIGH_IRQ_BASE + 6)
+#define BCM_6328_ENETSW_TXDMA3_IRQ (BCM_6328_HIGH_IRQ_BASE + 7)
+#define BCM_6328_XTM_IRQ (BCM_6328_HIGH_IRQ_BASE + 31)
+#define BCM_6328_XTM_DMA0_IRQ (BCM_6328_HIGH_IRQ_BASE + 11)
+
+#define BCM_6328_PCM_DMA0_IRQ (IRQ_INTERNAL_BASE + 2)
+#define BCM_6328_PCM_DMA1_IRQ (IRQ_INTERNAL_BASE + 3)
+#define BCM_6328_EXT_IRQ0 (IRQ_INTERNAL_BASE + 24)
+#define BCM_6328_EXT_IRQ1 (IRQ_INTERNAL_BASE + 25)
+#define BCM_6328_EXT_IRQ2 (IRQ_INTERNAL_BASE + 26)
+#define BCM_6328_EXT_IRQ3 (IRQ_INTERNAL_BASE + 27)
+
+/*
* 6338 irqs
*/
#define BCM_6338_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
+#define BCM_6338_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
#define BCM_6338_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
#define BCM_6338_UART1_IRQ 0
#define BCM_6338_DSL_IRQ (IRQ_INTERNAL_BASE + 5)
@@ -539,6 +664,7 @@ enum bcm63xx_irq {
* 6345 irqs
*/
#define BCM_6345_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
+#define BCM_6345_SPI_IRQ 0
#define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
#define BCM_6345_UART1_IRQ 0
#define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3)
@@ -569,6 +695,7 @@ enum bcm63xx_irq {
* 6348 irqs
*/
#define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
+#define BCM_6348_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
#define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
#define BCM_6348_UART1_IRQ 0
#define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
@@ -599,6 +726,7 @@ enum bcm63xx_irq {
* 6358 irqs
*/
#define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
+#define BCM_6358_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
#define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
#define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3)
#define BCM_6358_DSL_IRQ (IRQ_INTERNAL_BASE + 29)
@@ -638,6 +766,7 @@ enum bcm63xx_irq {
#define BCM_6368_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32)
#define BCM_6368_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
+#define BCM_6368_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
#define BCM_6368_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
#define BCM_6368_UART1_IRQ (IRQ_INTERNAL_BASE + 3)
#define BCM_6368_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
@@ -677,6 +806,7 @@ extern const int *bcm63xx_irqs;
#define __GEN_CPU_IRQ_TABLE(__cpu) \
[IRQ_TIMER] = BCM_## __cpu ##_TIMER_IRQ, \
+ [IRQ_SPI] = BCM_## __cpu ##_SPI_IRQ, \
[IRQ_UART0] = BCM_## __cpu ##_UART0_IRQ, \
[IRQ_UART1] = BCM_## __cpu ##_UART1_IRQ, \
[IRQ_DSL] = BCM_## __cpu ##_DSL_IRQ, \
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
new file mode 100644
index 00000000000..354b8481ec4
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
@@ -0,0 +1,12 @@
+#ifndef __BCM63XX_FLASH_H
+#define __BCM63XX_FLASH_H
+
+enum {
+ BCM63XX_FLASH_TYPE_PARALLEL,
+ BCM63XX_FLASH_TYPE_SERIAL,
+ BCM63XX_FLASH_TYPE_NAND,
+};
+
+int __init bcm63xx_flash_register(void);
+
+#endif /* __BCM63XX_FLASH_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
new file mode 100644
index 00000000000..7d98dbe5d4b
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
@@ -0,0 +1,89 @@
+#ifndef BCM63XX_DEV_SPI_H
+#define BCM63XX_DEV_SPI_H
+
+#include <linux/types.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+int __init bcm63xx_spi_register(void);
+
+struct bcm63xx_spi_pdata {
+ unsigned int fifo_size;
+ int bus_num;
+ int num_chipselect;
+ u32 speed_hz;
+};
+
+enum bcm63xx_regs_spi {
+ SPI_CMD,
+ SPI_INT_STATUS,
+ SPI_INT_MASK_ST,
+ SPI_INT_MASK,
+ SPI_ST,
+ SPI_CLK_CFG,
+ SPI_FILL_BYTE,
+ SPI_MSG_TAIL,
+ SPI_RX_TAIL,
+ SPI_MSG_CTL,
+ SPI_MSG_DATA,
+ SPI_RX_DATA,
+};
+
+#define __GEN_SPI_RSET_BASE(__cpu, __rset) \
+ case SPI_## __rset: \
+ return SPI_## __cpu ##_## __rset;
+
+#define __GEN_SPI_RSET(__cpu) \
+ switch (reg) { \
+ __GEN_SPI_RSET_BASE(__cpu, CMD) \
+ __GEN_SPI_RSET_BASE(__cpu, INT_STATUS) \
+ __GEN_SPI_RSET_BASE(__cpu, INT_MASK_ST) \
+ __GEN_SPI_RSET_BASE(__cpu, INT_MASK) \
+ __GEN_SPI_RSET_BASE(__cpu, ST) \
+ __GEN_SPI_RSET_BASE(__cpu, CLK_CFG) \
+ __GEN_SPI_RSET_BASE(__cpu, FILL_BYTE) \
+ __GEN_SPI_RSET_BASE(__cpu, MSG_TAIL) \
+ __GEN_SPI_RSET_BASE(__cpu, RX_TAIL) \
+ __GEN_SPI_RSET_BASE(__cpu, MSG_CTL) \
+ __GEN_SPI_RSET_BASE(__cpu, MSG_DATA) \
+ __GEN_SPI_RSET_BASE(__cpu, RX_DATA) \
+ }
+
+#define __GEN_SPI_REGS_TABLE(__cpu) \
+ [SPI_CMD] = SPI_## __cpu ##_CMD, \
+ [SPI_INT_STATUS] = SPI_## __cpu ##_INT_STATUS, \
+ [SPI_INT_MASK_ST] = SPI_## __cpu ##_INT_MASK_ST, \
+ [SPI_INT_MASK] = SPI_## __cpu ##_INT_MASK, \
+ [SPI_ST] = SPI_## __cpu ##_ST, \
+ [SPI_CLK_CFG] = SPI_## __cpu ##_CLK_CFG, \
+ [SPI_FILL_BYTE] = SPI_## __cpu ##_FILL_BYTE, \
+ [SPI_MSG_TAIL] = SPI_## __cpu ##_MSG_TAIL, \
+ [SPI_RX_TAIL] = SPI_## __cpu ##_RX_TAIL, \
+ [SPI_MSG_CTL] = SPI_## __cpu ##_MSG_CTL, \
+ [SPI_MSG_DATA] = SPI_## __cpu ##_MSG_DATA, \
+ [SPI_RX_DATA] = SPI_## __cpu ##_RX_DATA,
+
+static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
+{
+#ifdef BCMCPU_RUNTIME_DETECT
+ extern const unsigned long *bcm63xx_regs_spi;
+
+ return bcm63xx_regs_spi[reg];
+#else
+#ifdef CONFIG_BCM63XX_CPU_6338
+ __GEN_SPI_RSET(6338)
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6348
+ __GEN_SPI_RSET(6348)
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6358
+ __GEN_SPI_RSET(6358)
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6368
+ __GEN_SPI_RSET(6368)
+#endif
+#endif
+ return 0;
+}
+
+#endif /* BCM63XX_DEV_SPI_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
index 1d7dd96aa46..0a9891f7580 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
@@ -9,6 +9,8 @@ int __init bcm63xx_gpio_init(void);
static inline unsigned long bcm63xx_gpio_count(void)
{
switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ return 32;
case BCM6358_CPU_ID:
return 40;
case BCM6338_CPU_ID:
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
index 72477a6441d..9203d90e610 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
@@ -40,6 +40,10 @@
#define BCM_CB_MEM_END_PA (BCM_CB_MEM_BASE_PA + \
BCM_CB_MEM_SIZE - 1)
+#define BCM_PCIE_MEM_BASE_PA 0x10f00000
+#define BCM_PCIE_MEM_SIZE (16 * 1024 * 1024)
+#define BCM_PCIE_MEM_END_PA (BCM_PCIE_MEM_BASE_PA + \
+ BCM_PCIE_MEM_SIZE - 1)
/*
* Internal registers are accessed through KSEG3
@@ -85,11 +89,15 @@
#define bcm_mpi_writel(v, o) bcm_rset_writel(RSET_MPI, (v), (o))
#define bcm_pcmcia_readl(o) bcm_rset_readl(RSET_PCMCIA, (o))
#define bcm_pcmcia_writel(v, o) bcm_rset_writel(RSET_PCMCIA, (v), (o))
+#define bcm_pcie_readl(o) bcm_rset_readl(RSET_PCIE, (o))
+#define bcm_pcie_writel(v, o) bcm_rset_writel(RSET_PCIE, (v), (o))
#define bcm_sdram_readl(o) bcm_rset_readl(RSET_SDRAM, (o))
#define bcm_sdram_writel(v, o) bcm_rset_writel(RSET_SDRAM, (v), (o))
#define bcm_memc_readl(o) bcm_rset_readl(RSET_MEMC, (o))
#define bcm_memc_writel(v, o) bcm_rset_writel(RSET_MEMC, (v), (o))
#define bcm_ddr_readl(o) bcm_rset_readl(RSET_DDR, (o))
#define bcm_ddr_writel(v, o) bcm_rset_writel(RSET_DDR, (v), (o))
+#define bcm_misc_readl(o) bcm_rset_readl(RSET_MISC, (o))
+#define bcm_misc_writel(v, o) bcm_rset_writel(RSET_MISC, (v), (o))
#endif /* ! BCM63XX_IO_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index fdcd78ca1b0..4ccc2a748af 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -15,6 +15,30 @@
/* Clock Control register */
#define PERF_CKCTL_REG 0x4
+#define CKCTL_6328_PHYMIPS_EN (1 << 0)
+#define CKCTL_6328_ADSL_QPROC_EN (1 << 1)
+#define CKCTL_6328_ADSL_AFE_EN (1 << 2)
+#define CKCTL_6328_ADSL_EN (1 << 3)
+#define CKCTL_6328_MIPS_EN (1 << 4)
+#define CKCTL_6328_SAR_EN (1 << 5)
+#define CKCTL_6328_PCM_EN (1 << 6)
+#define CKCTL_6328_USBD_EN (1 << 7)
+#define CKCTL_6328_USBH_EN (1 << 8)
+#define CKCTL_6328_HSSPI_EN (1 << 9)
+#define CKCTL_6328_PCIE_EN (1 << 10)
+#define CKCTL_6328_ROBOSW_EN (1 << 11)
+
+#define CKCTL_6328_ALL_SAFE_EN (CKCTL_6328_PHYMIPS_EN | \
+ CKCTL_6328_ADSL_QPROC_EN | \
+ CKCTL_6328_ADSL_AFE_EN | \
+ CKCTL_6328_ADSL_EN | \
+ CKCTL_6328_SAR_EN | \
+ CKCTL_6328_PCM_EN | \
+ CKCTL_6328_USBD_EN | \
+ CKCTL_6328_USBH_EN | \
+ CKCTL_6328_ROBOSW_EN | \
+ CKCTL_6328_PCIE_EN)
+
#define CKCTL_6338_ADSLPHY_EN (1 << 0)
#define CKCTL_6338_MPI_EN (1 << 1)
#define CKCTL_6338_DRAM_EN (1 << 2)
@@ -90,35 +114,36 @@
#define CKCTL_6368_PHYMIPS_EN (1 << 6)
#define CKCTL_6368_SWPKT_USB_EN (1 << 7)
#define CKCTL_6368_SWPKT_SAR_EN (1 << 8)
-#define CKCTL_6368_SPI_CLK_EN (1 << 9)
-#define CKCTL_6368_USBD_CLK_EN (1 << 10)
-#define CKCTL_6368_SAR_CLK_EN (1 << 11)
-#define CKCTL_6368_ROBOSW_CLK_EN (1 << 12)
-#define CKCTL_6368_UTOPIA_CLK_EN (1 << 13)
-#define CKCTL_6368_PCM_CLK_EN (1 << 14)
-#define CKCTL_6368_USBH_CLK_EN (1 << 15)
+#define CKCTL_6368_SPI_EN (1 << 9)
+#define CKCTL_6368_USBD_EN (1 << 10)
+#define CKCTL_6368_SAR_EN (1 << 11)
+#define CKCTL_6368_ROBOSW_EN (1 << 12)
+#define CKCTL_6368_UTOPIA_EN (1 << 13)
+#define CKCTL_6368_PCM_EN (1 << 14)
+#define CKCTL_6368_USBH_EN (1 << 15)
#define CKCTL_6368_DISABLE_GLESS_EN (1 << 16)
-#define CKCTL_6368_NAND_CLK_EN (1 << 17)
-#define CKCTL_6368_IPSEC_CLK_EN (1 << 18)
+#define CKCTL_6368_NAND_EN (1 << 17)
+#define CKCTL_6368_IPSEC_EN (1 << 18)
#define CKCTL_6368_ALL_SAFE_EN (CKCTL_6368_SWPKT_USB_EN | \
CKCTL_6368_SWPKT_SAR_EN | \
- CKCTL_6368_SPI_CLK_EN | \
- CKCTL_6368_USBD_CLK_EN | \
- CKCTL_6368_SAR_CLK_EN | \
- CKCTL_6368_ROBOSW_CLK_EN | \
- CKCTL_6368_UTOPIA_CLK_EN | \
- CKCTL_6368_PCM_CLK_EN | \
- CKCTL_6368_USBH_CLK_EN | \
+ CKCTL_6368_SPI_EN | \
+ CKCTL_6368_USBD_EN | \
+ CKCTL_6368_SAR_EN | \
+ CKCTL_6368_ROBOSW_EN | \
+ CKCTL_6368_UTOPIA_EN | \
+ CKCTL_6368_PCM_EN | \
+ CKCTL_6368_USBH_EN | \
CKCTL_6368_DISABLE_GLESS_EN | \
- CKCTL_6368_NAND_CLK_EN | \
- CKCTL_6368_IPSEC_CLK_EN)
+ CKCTL_6368_NAND_EN | \
+ CKCTL_6368_IPSEC_EN)
/* System PLL Control register */
#define PERF_SYS_PLL_CTL_REG 0x8
#define SYS_PLL_SOFT_RESET 0x1
/* Interrupt Mask register */
+#define PERF_IRQMASK_6328_REG 0x20
#define PERF_IRQMASK_6338_REG 0xc
#define PERF_IRQMASK_6345_REG 0xc
#define PERF_IRQMASK_6348_REG 0xc
@@ -126,6 +151,7 @@
#define PERF_IRQMASK_6368_REG 0x20
/* Interrupt Status register */
+#define PERF_IRQSTAT_6328_REG 0x28
#define PERF_IRQSTAT_6338_REG 0x10
#define PERF_IRQSTAT_6345_REG 0x10
#define PERF_IRQSTAT_6348_REG 0x10
@@ -133,6 +159,7 @@
#define PERF_IRQSTAT_6368_REG 0x28
/* External Interrupt Configuration register */
+#define PERF_EXTIRQ_CFG_REG_6328 0x18
#define PERF_EXTIRQ_CFG_REG_6338 0x14
#define PERF_EXTIRQ_CFG_REG_6348 0x14
#define PERF_EXTIRQ_CFG_REG_6358 0x14
@@ -162,8 +189,21 @@
/* Soft Reset register */
#define PERF_SOFTRESET_REG 0x28
+#define PERF_SOFTRESET_6328_REG 0x10
#define PERF_SOFTRESET_6368_REG 0x10
+#define SOFTRESET_6328_SPI_MASK (1 << 0)
+#define SOFTRESET_6328_EPHY_MASK (1 << 1)
+#define SOFTRESET_6328_SAR_MASK (1 << 2)
+#define SOFTRESET_6328_ENETSW_MASK (1 << 3)
+#define SOFTRESET_6328_USBS_MASK (1 << 4)
+#define SOFTRESET_6328_USBH_MASK (1 << 5)
+#define SOFTRESET_6328_PCM_MASK (1 << 6)
+#define SOFTRESET_6328_PCIE_CORE_MASK (1 << 7)
+#define SOFTRESET_6328_PCIE_MASK (1 << 8)
+#define SOFTRESET_6328_PCIE_EXT_MASK (1 << 9)
+#define SOFTRESET_6328_PCIE_HARD_MASK (1 << 10)
+
#define SOFTRESET_6338_SPI_MASK (1 << 0)
#define SOFTRESET_6338_ENET_MASK (1 << 2)
#define SOFTRESET_6338_USBH_MASK (1 << 3)
@@ -307,6 +347,8 @@
/* Watchdog reset length register */
#define WDT_RSTLEN_REG 0x8
+/* Watchdog soft reset register (BCM6328 only) */
+#define WDT_SOFTRESET_REG 0xc
/*************************************************************************
* _REG relative to RSET_UARTx
@@ -507,6 +549,15 @@
#define GPIO_BASEMODE_6368_MASK 0x7
/* those bits must be kept as read in gpio basemode register*/
+#define GPIO_STRAPBUS_REG 0x40
+#define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
+#define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
+#define STRAPBUS_6368_BOOT_SEL_MASK 0x3
+#define STRAPBUS_6368_BOOT_SEL_NAND 0
+#define STRAPBUS_6368_BOOT_SEL_SERIAL 1
+#define STRAPBUS_6368_BOOT_SEL_PARALLEL 3
+
+
/*************************************************************************
* _REG relative to RSET_ENET
*************************************************************************/
@@ -924,6 +975,8 @@
* _REG relative to RSET_DDR
*************************************************************************/
+#define DDR_CSEND_REG 0x8
+
#define DDR_DMIPSPLLCFG_REG 0x18
#define DMIPSPLLCFG_M1_SHIFT 0
#define DMIPSPLLCFG_M1_MASK (0xff << DMIPSPLLCFG_M1_SHIFT)
@@ -973,4 +1026,201 @@
#define M2M_SRCID_REG(x) ((x) * 0x40 + 0x14)
#define M2M_DSTID_REG(x) ((x) * 0x40 + 0x18)
+/*************************************************************************
+ * _REG relative to RSET_RNG
+ *************************************************************************/
+
+#define RNG_CTRL 0x00
+#define RNG_EN (1 << 0)
+
+#define RNG_STAT 0x04
+#define RNG_AVAIL_MASK (0xff000000)
+
+#define RNG_DATA 0x08
+#define RNG_THRES 0x0c
+#define RNG_MASK 0x10
+
+/*************************************************************************
+ * _REG relative to RSET_SPI
+ *************************************************************************/
+
+/* BCM 6338 SPI core */
+#define SPI_6338_CMD 0x00 /* 16-bits register */
+#define SPI_6338_INT_STATUS 0x02
+#define SPI_6338_INT_MASK_ST 0x03
+#define SPI_6338_INT_MASK 0x04
+#define SPI_6338_ST 0x05
+#define SPI_6338_CLK_CFG 0x06
+#define SPI_6338_FILL_BYTE 0x07
+#define SPI_6338_MSG_TAIL 0x09
+#define SPI_6338_RX_TAIL 0x0b
+#define SPI_6338_MSG_CTL 0x40
+#define SPI_6338_MSG_DATA 0x41
+#define SPI_6338_MSG_DATA_SIZE 0x3f
+#define SPI_6338_RX_DATA 0x80
+#define SPI_6338_RX_DATA_SIZE 0x3f
+
+/* BCM 6348 SPI core */
+#define SPI_6348_CMD 0x00 /* 16-bits register */
+#define SPI_6348_INT_STATUS 0x02
+#define SPI_6348_INT_MASK_ST 0x03
+#define SPI_6348_INT_MASK 0x04
+#define SPI_6348_ST 0x05
+#define SPI_6348_CLK_CFG 0x06
+#define SPI_6348_FILL_BYTE 0x07
+#define SPI_6348_MSG_TAIL 0x09
+#define SPI_6348_RX_TAIL 0x0b
+#define SPI_6348_MSG_CTL 0x40
+#define SPI_6348_MSG_DATA 0x41
+#define SPI_6348_MSG_DATA_SIZE 0x3f
+#define SPI_6348_RX_DATA 0x80
+#define SPI_6348_RX_DATA_SIZE 0x3f
+
+/* BCM 6358 SPI core */
+#define SPI_6358_MSG_CTL 0x00 /* 16-bits register */
+#define SPI_6358_MSG_DATA 0x02
+#define SPI_6358_MSG_DATA_SIZE 0x21e
+#define SPI_6358_RX_DATA 0x400
+#define SPI_6358_RX_DATA_SIZE 0x220
+#define SPI_6358_CMD 0x700 /* 16-bits register */
+#define SPI_6358_INT_STATUS 0x702
+#define SPI_6358_INT_MASK_ST 0x703
+#define SPI_6358_INT_MASK 0x704
+#define SPI_6358_ST 0x705
+#define SPI_6358_CLK_CFG 0x706
+#define SPI_6358_FILL_BYTE 0x707
+#define SPI_6358_MSG_TAIL 0x709
+#define SPI_6358_RX_TAIL 0x70B
+
+/* BCM 6358 SPI core */
+#define SPI_6368_MSG_CTL 0x00 /* 16-bits register */
+#define SPI_6368_MSG_DATA 0x02
+#define SPI_6368_MSG_DATA_SIZE 0x21e
+#define SPI_6368_RX_DATA 0x400
+#define SPI_6368_RX_DATA_SIZE 0x220
+#define SPI_6368_CMD 0x700 /* 16-bits register */
+#define SPI_6368_INT_STATUS 0x702
+#define SPI_6368_INT_MASK_ST 0x703
+#define SPI_6368_INT_MASK 0x704
+#define SPI_6368_ST 0x705
+#define SPI_6368_CLK_CFG 0x706
+#define SPI_6368_FILL_BYTE 0x707
+#define SPI_6368_MSG_TAIL 0x709
+#define SPI_6368_RX_TAIL 0x70B
+
+/* Shared SPI definitions */
+
+/* Message configuration */
+#define SPI_FD_RW 0x00
+#define SPI_HD_W 0x01
+#define SPI_HD_R 0x02
+#define SPI_BYTE_CNT_SHIFT 0
+#define SPI_MSG_TYPE_SHIFT 14
+
+/* Command */
+#define SPI_CMD_NOOP 0x00
+#define SPI_CMD_SOFT_RESET 0x01
+#define SPI_CMD_HARD_RESET 0x02
+#define SPI_CMD_START_IMMEDIATE 0x03
+#define SPI_CMD_COMMAND_SHIFT 0
+#define SPI_CMD_COMMAND_MASK 0x000f
+#define SPI_CMD_DEVICE_ID_SHIFT 4
+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
+#define SPI_CMD_ONE_BYTE_SHIFT 11
+#define SPI_CMD_ONE_WIRE_SHIFT 12
+#define SPI_DEV_ID_0 0
+#define SPI_DEV_ID_1 1
+#define SPI_DEV_ID_2 2
+#define SPI_DEV_ID_3 3
+
+/* Interrupt mask */
+#define SPI_INTR_CMD_DONE 0x01
+#define SPI_INTR_RX_OVERFLOW 0x02
+#define SPI_INTR_TX_UNDERFLOW 0x04
+#define SPI_INTR_TX_OVERFLOW 0x08
+#define SPI_INTR_RX_UNDERFLOW 0x10
+#define SPI_INTR_CLEAR_ALL 0x1f
+
+/* Status */
+#define SPI_RX_EMPTY 0x02
+#define SPI_CMD_BUSY 0x04
+#define SPI_SERIAL_BUSY 0x08
+
+/* Clock configuration */
+#define SPI_CLK_20MHZ 0x00
+#define SPI_CLK_0_391MHZ 0x01
+#define SPI_CLK_0_781MHZ 0x02 /* default */
+#define SPI_CLK_1_563MHZ 0x03
+#define SPI_CLK_3_125MHZ 0x04
+#define SPI_CLK_6_250MHZ 0x05
+#define SPI_CLK_12_50MHZ 0x06
+#define SPI_CLK_MASK 0x07
+#define SPI_SSOFFTIME_MASK 0x38
+#define SPI_SSOFFTIME_SHIFT 3
+#define SPI_BYTE_SWAP 0x80
+
+/*************************************************************************
+ * _REG relative to RSET_MISC
+ *************************************************************************/
+#define MISC_SERDES_CTRL_REG 0x0
+#define SERDES_PCIE_EN (1 << 0)
+#define SERDES_PCIE_EXD_EN (1 << 15)
+
+#define MISC_STRAPBUS_6328_REG 0x240
+#define STRAPBUS_6328_FCVO_SHIFT 7
+#define STRAPBUS_6328_FCVO_MASK (0x1f << STRAPBUS_6328_FCVO_SHIFT)
+#define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
+#define STRAPBUS_6328_BOOT_SEL_NAND (0 << 28)
+
+/*************************************************************************
+ * _REG relative to RSET_PCIE
+ *************************************************************************/
+
+#define PCIE_CONFIG2_REG 0x408
+#define CONFIG2_BAR1_SIZE_EN 1
+#define CONFIG2_BAR1_SIZE_MASK 0xf
+
+#define PCIE_IDVAL3_REG 0x43c
+#define IDVAL3_CLASS_CODE_MASK 0xffffff
+#define IDVAL3_SUBCLASS_SHIFT 8
+#define IDVAL3_CLASS_SHIFT 16
+
+#define PCIE_DLSTATUS_REG 0x1048
+#define DLSTATUS_PHYLINKUP (1 << 13)
+
+#define PCIE_BRIDGE_OPT1_REG 0x2820
+#define OPT1_RD_BE_OPT_EN (1 << 7)
+#define OPT1_RD_REPLY_BE_FIX_EN (1 << 9)
+#define OPT1_PCIE_BRIDGE_HOLE_DET_EN (1 << 11)
+#define OPT1_L1_INT_STATUS_MASK_POL (1 << 12)
+
+#define PCIE_BRIDGE_OPT2_REG 0x2824
+#define OPT2_UBUS_UR_DECODE_DIS (1 << 2)
+#define OPT2_TX_CREDIT_CHK_EN (1 << 4)
+#define OPT2_CFG_TYPE1_BD_SEL (1 << 7)
+#define OPT2_CFG_TYPE1_BUS_NO_SHIFT 16
+#define OPT2_CFG_TYPE1_BUS_NO_MASK (0xff << OPT2_CFG_TYPE1_BUS_NO_SHIFT)
+
+#define PCIE_BRIDGE_BAR0_BASEMASK_REG 0x2828
+#define PCIE_BRIDGE_BAR1_BASEMASK_REG 0x2830
+#define BASEMASK_REMAP_EN (1 << 0)
+#define BASEMASK_SWAP_EN (1 << 1)
+#define BASEMASK_MASK_SHIFT 4
+#define BASEMASK_MASK_MASK (0xfff << BASEMASK_MASK_SHIFT)
+#define BASEMASK_BASE_SHIFT 20
+#define BASEMASK_BASE_MASK (0xfff << BASEMASK_BASE_SHIFT)
+
+#define PCIE_BRIDGE_BAR0_REBASE_ADDR_REG 0x282c
+#define PCIE_BRIDGE_BAR1_REBASE_ADDR_REG 0x2834
+#define REBASE_ADDR_BASE_SHIFT 20
+#define REBASE_ADDR_BASE_MASK (0xfff << REBASE_ADDR_BASE_SHIFT)
+
+#define PCIE_BRIDGE_RC_INT_MASK_REG 0x2854
+#define PCIE_RC_INT_A (1 << 0)
+#define PCIE_RC_INT_B (1 << 1)
+#define PCIE_RC_INT_C (1 << 2)
+#define PCIE_RC_INT_D (1 << 3)
+
+#define PCIE_DEVICE_OFFSET 0x8000
+
#endif /* BCM63XX_REGS_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/ioremap.h b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
index ef94ba73646..30931c42379 100644
--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
@@ -18,6 +18,7 @@ static inline int is_bcm63xx_internal_registers(phys_t offset)
if (offset >= 0xfff00000)
return 1;
break;
+ case BCM6328_CPU_ID:
case BCM6368_CPU_ID:
if (offset >= 0xb0000000 && offset < 0xb1000000)
return 1;
diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
index bb5b9a4e29c..986982db7c3 100644
--- a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
+++ b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
@@ -19,6 +19,8 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#define JZ_NAND_NUM_BANKS 4
+
struct jz_nand_platform_data {
int num_partitions;
struct mtd_partition *partitions;
@@ -27,6 +29,8 @@ struct jz_nand_platform_data {
unsigned int busy_gpio;
+ unsigned char banks[JZ_NAND_NUM_BANKS];
+
void (*ident_callback)(struct platform_device *, struct nand_chip *,
struct mtd_partition **, int *num_partitions);
};
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index 1e29b9dd1d7..06367c37e1b 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/kconfig.h>
/* loongson internal northbridge initialization */
extern void bonito_irq_init(void);
@@ -66,7 +67,7 @@ extern int mach_i8259_irq(void);
#include <linux/interrupt.h>
static inline void do_perfcnt_IRQ(void)
{
-#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE)
+#if IS_ENABLED(CONFIG_OPROFILE)
do_IRQ(LOONGSON2_PERFCNT_IRQ);
#endif
}
diff --git a/arch/mips/include/asm/mach-loongson1/irq.h b/arch/mips/include/asm/mach-loongson1/irq.h
new file mode 100644
index 00000000000..da96ed42f73
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/irq.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * IRQ mappings for Loongson 1
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_IRQ_H
+#define __ASM_MACH_LOONGSON1_IRQ_H
+
+/*
+ * CPU core Interrupt Numbers
+ */
+#define MIPS_CPU_IRQ_BASE 0
+#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
+
+#define SOFTINT0_IRQ MIPS_CPU_IRQ(0)
+#define SOFTINT1_IRQ MIPS_CPU_IRQ(1)
+#define INT0_IRQ MIPS_CPU_IRQ(2)
+#define INT1_IRQ MIPS_CPU_IRQ(3)
+#define INT2_IRQ MIPS_CPU_IRQ(4)
+#define INT3_IRQ MIPS_CPU_IRQ(5)
+#define INT4_IRQ MIPS_CPU_IRQ(6)
+#define TIMER_IRQ MIPS_CPU_IRQ(7) /* cpu timer */
+
+#define MIPS_CPU_IRQS (MIPS_CPU_IRQ(7) + 1 - MIPS_CPU_IRQ_BASE)
+
+/*
+ * INT0~3 Interrupt Numbers
+ */
+#define LS1X_IRQ_BASE MIPS_CPU_IRQS
+#define LS1X_IRQ(n, x) (LS1X_IRQ_BASE + (n << 5) + (x))
+
+#define LS1X_UART0_IRQ LS1X_IRQ(0, 2)
+#define LS1X_UART1_IRQ LS1X_IRQ(0, 3)
+#define LS1X_UART2_IRQ LS1X_IRQ(0, 4)
+#define LS1X_UART3_IRQ LS1X_IRQ(0, 5)
+#define LS1X_CAN0_IRQ LS1X_IRQ(0, 6)
+#define LS1X_CAN1_IRQ LS1X_IRQ(0, 7)
+#define LS1X_SPI0_IRQ LS1X_IRQ(0, 8)
+#define LS1X_SPI1_IRQ LS1X_IRQ(0, 9)
+#define LS1X_AC97_IRQ LS1X_IRQ(0, 10)
+#define LS1X_DMA0_IRQ LS1X_IRQ(0, 13)
+#define LS1X_DMA1_IRQ LS1X_IRQ(0, 14)
+#define LS1X_DMA2_IRQ LS1X_IRQ(0, 15)
+#define LS1X_PWM0_IRQ LS1X_IRQ(0, 17)
+#define LS1X_PWM1_IRQ LS1X_IRQ(0, 18)
+#define LS1X_PWM2_IRQ LS1X_IRQ(0, 19)
+#define LS1X_PWM3_IRQ LS1X_IRQ(0, 20)
+#define LS1X_RTC_INT0_IRQ LS1X_IRQ(0, 21)
+#define LS1X_RTC_INT1_IRQ LS1X_IRQ(0, 22)
+#define LS1X_RTC_INT2_IRQ LS1X_IRQ(0, 23)
+#define LS1X_TOY_INT0_IRQ LS1X_IRQ(0, 24)
+#define LS1X_TOY_INT1_IRQ LS1X_IRQ(0, 25)
+#define LS1X_TOY_INT2_IRQ LS1X_IRQ(0, 26)
+#define LS1X_RTC_TICK_IRQ LS1X_IRQ(0, 27)
+#define LS1X_TOY_TICK_IRQ LS1X_IRQ(0, 28)
+
+#define LS1X_EHCI_IRQ LS1X_IRQ(1, 0)
+#define LS1X_OHCI_IRQ LS1X_IRQ(1, 1)
+#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 2)
+#define LS1X_GMAC1_IRQ LS1X_IRQ(1, 3)
+
+#define LS1X_IRQS (LS1X_IRQ(4, 31) + 1 - LS1X_IRQ_BASE)
+
+#define NR_IRQS (MIPS_CPU_IRQS + LS1X_IRQS)
+
+#endif /* __ASM_MACH_LOONGSON1_IRQ_H */
diff --git a/arch/mips/include/asm/mach-loongson1/loongson1.h b/arch/mips/include/asm/mach-loongson1/loongson1.h
new file mode 100644
index 00000000000..4e18e88cebb
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/loongson1.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Register mappings for Loongson 1
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_LOONGSON1_H
+#define __ASM_MACH_LOONGSON1_LOONGSON1_H
+
+#define DEFAULT_MEMSIZE 256 /* If no memsize provided */
+
+/* Loongson 1 Register Bases */
+#define LS1X_INTC_BASE 0x1fd01040
+#define LS1X_EHCI_BASE 0x1fe00000
+#define LS1X_OHCI_BASE 0x1fe08000
+#define LS1X_GMAC0_BASE 0x1fe10000
+#define LS1X_GMAC1_BASE 0x1fe20000
+
+#define LS1X_UART0_BASE 0x1fe40000
+#define LS1X_UART1_BASE 0x1fe44000
+#define LS1X_UART2_BASE 0x1fe48000
+#define LS1X_UART3_BASE 0x1fe4c000
+#define LS1X_CAN0_BASE 0x1fe50000
+#define LS1X_CAN1_BASE 0x1fe54000
+#define LS1X_I2C0_BASE 0x1fe58000
+#define LS1X_I2C1_BASE 0x1fe68000
+#define LS1X_I2C2_BASE 0x1fe70000
+#define LS1X_PWM_BASE 0x1fe5c000
+#define LS1X_WDT_BASE 0x1fe5c060
+#define LS1X_RTC_BASE 0x1fe64000
+#define LS1X_AC97_BASE 0x1fe74000
+#define LS1X_NAND_BASE 0x1fe78000
+#define LS1X_CLK_BASE 0x1fe78030
+
+#include <regs-clk.h>
+#include <regs-wdt.h>
+
+#endif /* __ASM_MACH_LOONGSON1_LOONGSON1_H */
diff --git a/arch/mips/include/asm/mach-loongson1/platform.h b/arch/mips/include/asm/mach-loongson1/platform.h
new file mode 100644
index 00000000000..2f171617bad
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/platform.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+#ifndef __ASM_MACH_LOONGSON1_PLATFORM_H
+#define __ASM_MACH_LOONGSON1_PLATFORM_H
+
+#include <linux/platform_device.h>
+
+extern struct platform_device ls1x_uart_device;
+extern struct platform_device ls1x_eth0_device;
+extern struct platform_device ls1x_ehci_device;
+extern struct platform_device ls1x_rtc_device;
+
+void ls1x_serial_setup(void);
+
+#endif /* __ASM_MACH_LOONGSON1_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/prom.h b/arch/mips/include/asm/mach-loongson1/prom.h
new file mode 100644
index 00000000000..b871dc41b8d
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/prom.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_PROM_H
+#define __ASM_MACH_LOONGSON1_PROM_H
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+/* environment arguments from bootloader */
+extern unsigned long memsize, highmemsize;
+
+/* loongson-specific command line, env and memory initialization */
+extern char *prom_getenv(char *name);
+extern void __init prom_init_cmdline(void);
+
+#endif /* __ASM_MACH_LOONGSON1_PROM_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-clk.h b/arch/mips/include/asm/mach-loongson1/regs-clk.h
new file mode 100644
index 00000000000..8efa7fb9f73
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-clk.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 Clock Register Definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_CLK_H
+#define __ASM_MACH_LOONGSON1_REGS_CLK_H
+
+#define LS1X_CLK_REG(x) \
+ ((void __iomem *)KSEG1ADDR(LS1X_CLK_BASE + (x)))
+
+#define LS1X_CLK_PLL_FREQ LS1X_CLK_REG(0x0)
+#define LS1X_CLK_PLL_DIV LS1X_CLK_REG(0x4)
+
+/* Clock PLL Divisor Register Bits */
+#define DIV_DC_EN (0x1 << 31)
+#define DIV_DC (0x1f << 26)
+#define DIV_CPU_EN (0x1 << 25)
+#define DIV_CPU (0x1f << 20)
+#define DIV_DDR_EN (0x1 << 19)
+#define DIV_DDR (0x1f << 14)
+
+#define DIV_DC_SHIFT 26
+#define DIV_CPU_SHIFT 20
+#define DIV_DDR_SHIFT 14
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_CLK_H */
diff --git a/arch/mips/include/asm/mach-loongson1/regs-wdt.h b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
new file mode 100644
index 00000000000..f897de68c52
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/regs-wdt.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Loongson 1 watchdog register definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON1_REGS_WDT_H
+#define __ASM_MACH_LOONGSON1_REGS_WDT_H
+
+#define LS1X_WDT_REG(x) \
+ ((void __iomem *)KSEG1ADDR(LS1X_WDT_BASE + (x)))
+
+#define LS1X_WDT_EN LS1X_WDT_REG(0x0)
+#define LS1X_WDT_SET LS1X_WDT_REG(0x4)
+#define LS1X_WDT_TIMER LS1X_WDT_REG(0x8)
+
+#endif /* __ASM_MACH_LOONGSON1_REGS_WDT_H */
diff --git a/arch/mips/include/asm/mach-loongson1/war.h b/arch/mips/include/asm/mach-loongson1/war.h
new file mode 100644
index 00000000000..e3680a8fb34
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson1/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MACH_LOONGSON1_WAR_H
+#define __ASM_MACH_LOONGSON1_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define RM9000_CDEX_SMP_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+#define R10000_LLSC_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MACH_LOONGSON1_WAR_H */
diff --git a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
index d193fb68cf2..966db4be377 100644
--- a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h
@@ -48,7 +48,6 @@
#define cpu_has_userlocal 1
#define cpu_has_mips32r2 1
#define cpu_has_mips64r2 1
-#define cpu_has_dc_aliases 1
#else
#error "Unknown Netlogic CPU"
#endif
diff --git a/arch/mips/include/asm/mach-tx49xx/mangle-port.h b/arch/mips/include/asm/mach-tx49xx/mangle-port.h
index 5e6912fdd0e..490867b03c8 100644
--- a/arch/mips/include/asm/mach-tx49xx/mangle-port.h
+++ b/arch/mips/include/asm/mach-tx49xx/mangle-port.h
@@ -9,7 +9,7 @@
#define ioswabb(a, x) (x)
#define __mem_ioswabb(a, x) (x)
#if defined(CONFIG_TOSHIBA_RBTX4939) && \
- (defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)) && \
+ IS_ENABLED(CONFIG_SMC91X) && \
defined(__BIG_ENDIAN)
#define NEEDS_TXX9_IOSWABW
extern u16 (*ioswabw)(volatile u16 *a, u16 x);
diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h
index e71ff4c317f..5b3cb8553e9 100644
--- a/arch/mips/include/asm/mipsmtregs.h
+++ b/arch/mips/include/asm/mipsmtregs.h
@@ -28,6 +28,9 @@
#define read_c0_vpeconf0() __read_32bit_c0_register($1, 2)
#define write_c0_vpeconf0(val) __write_32bit_c0_register($1, 2, val)
+#define read_c0_vpeconf1() __read_32bit_c0_register($1, 3)
+#define write_c0_vpeconf1(val) __write_32bit_c0_register($1, 3, val)
+
#define read_c0_tcstatus() __read_32bit_c0_register($2, 1)
#define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val)
@@ -124,6 +127,14 @@
#define VPECONF0_XTC_SHIFT 21
#define VPECONF0_XTC (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+/* VPEConf1 fields (per VPE) */
+#define VPECONF1_NCP1_SHIFT 0
+#define VPECONF1_NCP1 (_ULCAST_(0xff) << VPECONF1_NCP1_SHIFT)
+#define VPECONF1_NCP2_SHIFT 10
+#define VPECONF1_NCP2 (_ULCAST_(0xff) << VPECONF1_NCP2_SHIFT)
+#define VPECONF1_NCX_SHIFT 20
+#define VPECONF1_NCX (_ULCAST_(0xff) << VPECONF1_NCX_SHIFT)
+
/* TCStatus fields (per TC) */
#define TCSTATUS_TASID (_ULCAST_(0xff))
#define TCSTATUS_IXMT_SHIFT 10
@@ -350,6 +361,8 @@ do { \
#define write_vpe_c0_vpecontrol(val) mttc0(1, 1, val)
#define read_vpe_c0_vpeconf0() mftc0(1, 2)
#define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val)
+#define read_vpe_c0_vpeconf1() mftc0(1, 3)
+#define write_vpe_c0_vpeconf1(val) mttc0(1, 3, val)
#define read_vpe_c0_count() mftc0(9, 0)
#define write_vpe_c0_count(val) mttc0(9, 0, val)
#define read_vpe_c0_status() mftc0(12, 0)
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 530008048c6..7531ecd654d 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -117,6 +117,8 @@ search_module_dbetables(unsigned long addr)
#define MODULE_PROC_FAMILY "RM9000 "
#elif defined CONFIG_CPU_SB1
#define MODULE_PROC_FAMILY "SB1 "
+#elif defined CONFIG_CPU_LOONGSON1
+#define MODULE_PROC_FAMILY "LOONGSON1 "
#elif defined CONFIG_CPU_LOONGSON2
#define MODULE_PROC_FAMILY "LOONGSON2 "
#elif defined CONFIG_CPU_CAVIUM_OCTEON
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
index bf7d41deb9b..7b63a6b722a 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/cpucontrol.h
@@ -47,7 +47,9 @@
#define CPU_BLOCKID_MAP 10
#define LSU_DEFEATURE 0x304
-#define LSU_CERRLOG_REGID 0x09
+#define LSU_DEBUG_ADDR 0x305
+#define LSU_DEBUG_DATA0 0x306
+#define LSU_CERRLOG_REGID 0x309
#define SCHED_DEFEATURE 0x700
/* Offsets of interest from the 'MAP' Block */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
index 86cc3391e50..2c63f975464 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/iomap.h
@@ -36,6 +36,9 @@
#define __NLM_HAL_IOMAP_H__
#define XLP_DEFAULT_IO_BASE 0x18000000
+#define XLP_DEFAULT_PCI_ECFG_BASE XLP_DEFAULT_IO_BASE
+#define XLP_DEFAULT_PCI_CFG_BASE 0x1c000000
+
#define NMI_BASE 0xbfc00000
#define XLP_IO_CLK 133333333
@@ -129,7 +132,7 @@
#define PCI_DEVICE_ID_NLM_PIC 0x1003
#define PCI_DEVICE_ID_NLM_PCIE 0x1004
#define PCI_DEVICE_ID_NLM_EHCI 0x1007
-#define PCI_DEVICE_ID_NLM_ILK 0x1008
+#define PCI_DEVICE_ID_NLM_OHCI 0x1008
#define PCI_DEVICE_ID_NLM_NAE 0x1009
#define PCI_DEVICE_ID_NLM_POE 0x100A
#define PCI_DEVICE_ID_NLM_FMN 0x100B
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h b/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
new file mode 100644
index 00000000000..66c323d1bd7
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlp-hal/pcibus.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __NLM_HAL_PCIBUS_H__
+#define __NLM_HAL_PCIBUS_H__
+
+/* PCIE Memory and IO regions */
+#define PCIE_MEM_BASE 0xd0000000ULL
+#define PCIE_MEM_LIMIT 0xdfffffffULL
+#define PCIE_IO_BASE 0x14000000ULL
+#define PCIE_IO_LIMIT 0x15ffffffULL
+
+#define PCIE_BRIDGE_CMD 0x1
+#define PCIE_BRIDGE_MSI_CAP 0x14
+#define PCIE_BRIDGE_MSI_ADDRL 0x15
+#define PCIE_BRIDGE_MSI_ADDRH 0x16
+#define PCIE_BRIDGE_MSI_DATA 0x17
+
+/* XLP Global PCIE configuration space registers */
+#define PCIE_BYTE_SWAP_MEM_BASE 0x247
+#define PCIE_BYTE_SWAP_MEM_LIM 0x248
+#define PCIE_BYTE_SWAP_IO_BASE 0x249
+#define PCIE_BYTE_SWAP_IO_LIM 0x24A
+#define PCIE_MSI_STATUS 0x25A
+#define PCIE_MSI_EN 0x25B
+#define PCIE_INT_EN0 0x261
+
+/* PCIE_MSI_EN */
+#define PCIE_MSI_VECTOR_INT_EN 0xFFFFFFFF
+
+/* PCIE_INT_EN0 */
+#define PCIE_MSI_INT_EN (1 << 9)
+
+#ifndef __ASSEMBLY__
+
+#define nlm_read_pcie_reg(b, r) nlm_read_reg(b, r)
+#define nlm_write_pcie_reg(b, r, v) nlm_write_reg(b, r, v)
+#define nlm_get_pcie_base(node, inst) \
+ nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node, inst))
+#define nlm_get_pcie_regbase(node, inst) \
+ (nlm_get_pcie_base(node, inst) + XLP_IO_PCI_HDRSZ)
+
+int xlp_pcie_link_irt(int link);
+#endif
+#endif /* __NLM_HAL_PCIBUS_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/pic.h b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
index b6628f7ccf7..ad8b80233a6 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/pic.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/pic.h
@@ -201,7 +201,11 @@
#define PIC_NUM_USB_IRTS 6
#define PIC_IRT_USB_0_INDEX 115
#define PIC_IRT_EHCI_0_INDEX 115
+#define PIC_IRT_OHCI_0_INDEX 116
+#define PIC_IRT_OHCI_1_INDEX 117
#define PIC_IRT_EHCI_1_INDEX 118
+#define PIC_IRT_OHCI_2_INDEX 119
+#define PIC_IRT_OHCI_3_INDEX 120
#define PIC_IRT_USB_INDEX(num) ((num) + PIC_IRT_USB_0_INDEX)
/* 115 to 120 */
#define PIC_IRT_GDX_INDEX 121
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/usb.h b/arch/mips/include/asm/netlogic/xlp-hal/usb.h
new file mode 100644
index 00000000000..a9cd350dfb6
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlp-hal/usb.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __NLM_HAL_USB_H__
+#define __NLM_HAL_USB_H__
+
+#define USB_CTL_0 0x01
+#define USB_PHY_0 0x0A
+#define USB_PHY_RESET 0x01
+#define USB_PHY_PORT_RESET_0 0x10
+#define USB_PHY_PORT_RESET_1 0x20
+#define USB_CONTROLLER_RESET 0x01
+#define USB_INT_STATUS 0x0E
+#define USB_INT_EN 0x0F
+#define USB_PHY_INTERRUPT_EN 0x01
+#define USB_OHCI_INTERRUPT_EN 0x02
+#define USB_OHCI_INTERRUPT1_EN 0x04
+#define USB_OHCI_INTERRUPT2_EN 0x08
+#define USB_CTRL_INTERRUPT_EN 0x10
+
+#ifndef __ASSEMBLY__
+
+#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v)
+#define nlm_get_usb_pcibase(node, inst) \
+ nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst))
+#define nlm_get_usb_hcd_base(node, inst) \
+ nlm_xkphys_map_pcibar0(nlm_get_usb_pcibase(node, inst))
+#define nlm_get_usb_regbase(node, inst) \
+ (nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
+
+#endif
+#endif /* __NLM_HAL_USB_H__ */
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
index 1540588e396..7e47209327a 100644
--- a/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
+++ b/arch/mips/include/asm/netlogic/xlp-hal/xlp.h
@@ -35,8 +35,21 @@
#ifndef _NLM_HAL_XLP_H
#define _NLM_HAL_XLP_H
-#define PIC_UART_0_IRQ 17
-#define PIC_UART_1_IRQ 18
+#define PIC_UART_0_IRQ 17
+#define PIC_UART_1_IRQ 18
+#define PIC_PCIE_LINK_0_IRQ 19
+#define PIC_PCIE_LINK_1_IRQ 20
+#define PIC_PCIE_LINK_2_IRQ 21
+#define PIC_PCIE_LINK_3_IRQ 22
+#define PIC_EHCI_0_IRQ 23
+#define PIC_EHCI_1_IRQ 24
+#define PIC_OHCI_0_IRQ 25
+#define PIC_OHCI_1_IRQ 26
+#define PIC_OHCI_2_IRQ 27
+#define PIC_OHCI_3_IRQ 28
+#define PIC_MMC_IRQ 29
+#define PIC_I2C_0_IRQ 30
+#define PIC_I2C_1_IRQ 31
#ifndef __ASSEMBLY__
diff --git a/arch/mips/include/asm/netlogic/xlr/bridge.h b/arch/mips/include/asm/netlogic/xlr/bridge.h
new file mode 100644
index 00000000000..2d02428c4f1
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/bridge.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _ASM_NLM_BRIDGE_H_
+#define _ASM_NLM_BRIDGE_H_
+
+#define BRIDGE_DRAM_0_BAR 0
+#define BRIDGE_DRAM_1_BAR 1
+#define BRIDGE_DRAM_2_BAR 2
+#define BRIDGE_DRAM_3_BAR 3
+#define BRIDGE_DRAM_4_BAR 4
+#define BRIDGE_DRAM_5_BAR 5
+#define BRIDGE_DRAM_6_BAR 6
+#define BRIDGE_DRAM_7_BAR 7
+#define BRIDGE_DRAM_CHN_0_MTR_0_BAR 8
+#define BRIDGE_DRAM_CHN_0_MTR_1_BAR 9
+#define BRIDGE_DRAM_CHN_0_MTR_2_BAR 10
+#define BRIDGE_DRAM_CHN_0_MTR_3_BAR 11
+#define BRIDGE_DRAM_CHN_0_MTR_4_BAR 12
+#define BRIDGE_DRAM_CHN_0_MTR_5_BAR 13
+#define BRIDGE_DRAM_CHN_0_MTR_6_BAR 14
+#define BRIDGE_DRAM_CHN_0_MTR_7_BAR 15
+#define BRIDGE_DRAM_CHN_1_MTR_0_BAR 16
+#define BRIDGE_DRAM_CHN_1_MTR_1_BAR 17
+#define BRIDGE_DRAM_CHN_1_MTR_2_BAR 18
+#define BRIDGE_DRAM_CHN_1_MTR_3_BAR 19
+#define BRIDGE_DRAM_CHN_1_MTR_4_BAR 20
+#define BRIDGE_DRAM_CHN_1_MTR_5_BAR 21
+#define BRIDGE_DRAM_CHN_1_MTR_6_BAR 22
+#define BRIDGE_DRAM_CHN_1_MTR_7_BAR 23
+#define BRIDGE_CFG_BAR 24
+#define BRIDGE_PHNX_IO_BAR 25
+#define BRIDGE_FLASH_BAR 26
+#define BRIDGE_SRAM_BAR 27
+#define BRIDGE_HTMEM_BAR 28
+#define BRIDGE_HTINT_BAR 29
+#define BRIDGE_HTPIC_BAR 30
+#define BRIDGE_HTSM_BAR 31
+#define BRIDGE_HTIO_BAR 32
+#define BRIDGE_HTCFG_BAR 33
+#define BRIDGE_PCIXCFG_BAR 34
+#define BRIDGE_PCIXMEM_BAR 35
+#define BRIDGE_PCIXIO_BAR 36
+#define BRIDGE_DEVICE_MASK 37
+#define BRIDGE_AERR_INTR_LOG1 38
+#define BRIDGE_AERR_INTR_LOG2 39
+#define BRIDGE_AERR_INTR_LOG3 40
+#define BRIDGE_AERR_DEV_STAT 41
+#define BRIDGE_AERR1_LOG1 42
+#define BRIDGE_AERR1_LOG2 43
+#define BRIDGE_AERR1_LOG3 44
+#define BRIDGE_AERR1_DEV_STAT 45
+#define BRIDGE_AERR_INTR_EN 46
+#define BRIDGE_AERR_UPG 47
+#define BRIDGE_AERR_CLEAR 48
+#define BRIDGE_AERR1_CLEAR 49
+#define BRIDGE_SBE_COUNTS 50
+#define BRIDGE_DBE_COUNTS 51
+#define BRIDGE_BITERR_INT_EN 52
+
+#define BRIDGE_SYS2IO_CREDITS 53
+#define BRIDGE_EVNT_CNT_CTRL1 54
+#define BRIDGE_EVNT_COUNTER1 55
+#define BRIDGE_EVNT_CNT_CTRL2 56
+#define BRIDGE_EVNT_COUNTER2 57
+#define BRIDGE_RESERVED1 58
+
+#define BRIDGE_DEFEATURE 59
+#define BRIDGE_SCRATCH0 60
+#define BRIDGE_SCRATCH1 61
+#define BRIDGE_SCRATCH2 62
+#define BRIDGE_SCRATCH3 63
+
+#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/flash.h b/arch/mips/include/asm/netlogic/xlr/flash.h
new file mode 100644
index 00000000000..f8aca5472b6
--- /dev/null
+++ b/arch/mips/include/asm/netlogic/xlr/flash.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _ASM_NLM_FLASH_H_
+#define _ASM_NLM_FLASH_H_
+
+#define FLASH_CSBASE_ADDR(cs) (cs)
+#define FLASH_CSADDR_MASK(cs) (0x10 + (cs))
+#define FLASH_CSDEV_PARM(cs) (0x20 + (cs))
+#define FLASH_CSTIME_PARMA(cs) (0x30 + (cs))
+#define FLASH_CSTIME_PARMB(cs) (0x40 + (cs))
+
+#define FLASH_INT_MASK 0x50
+#define FLASH_INT_STATUS 0x60
+#define FLASH_ERROR_STATUS 0x70
+#define FLASH_ERROR_ADDR 0x80
+
+#define FLASH_NAND_CLE(cs) (0x90 + (cs))
+#define FLASH_NAND_ALE(cs) (0xa0 + (cs))
+
+#define FLASH_NAND_CSDEV_PARAM 0x000041e6
+#define FLASH_NAND_CSTIME_PARAMA 0x4f400e22
+#define FLASH_NAND_CSTIME_PARAMB 0x000083cf
+
+#endif
diff --git a/arch/mips/include/asm/netlogic/xlr/gpio.h b/arch/mips/include/asm/netlogic/xlr/gpio.h
index 51f6ad4aeb1..8492e835b11 100644
--- a/arch/mips/include/asm/netlogic/xlr/gpio.h
+++ b/arch/mips/include/asm/netlogic/xlr/gpio.h
@@ -35,39 +35,40 @@
#ifndef _ASM_NLM_GPIO_H
#define _ASM_NLM_GPIO_H
-#define NETLOGIC_GPIO_INT_EN_REG 0
-#define NETLOGIC_GPIO_INPUT_INVERSION_REG 1
-#define NETLOGIC_GPIO_IO_DIR_REG 2
-#define NETLOGIC_GPIO_IO_DATA_WR_REG 3
-#define NETLOGIC_GPIO_IO_DATA_RD_REG 4
+#define GPIO_INT_EN_REG 0
+#define GPIO_INPUT_INVERSION_REG 1
+#define GPIO_IO_DIR_REG 2
+#define GPIO_IO_DATA_WR_REG 3
+#define GPIO_IO_DATA_RD_REG 4
-#define NETLOGIC_GPIO_SWRESET_REG 8
-#define NETLOGIC_GPIO_DRAM1_CNTRL_REG 9
-#define NETLOGIC_GPIO_DRAM1_RATIO_REG 10
-#define NETLOGIC_GPIO_DRAM1_RESET_REG 11
-#define NETLOGIC_GPIO_DRAM1_STATUS_REG 12
-#define NETLOGIC_GPIO_DRAM2_CNTRL_REG 13
-#define NETLOGIC_GPIO_DRAM2_RATIO_REG 14
-#define NETLOGIC_GPIO_DRAM2_RESET_REG 15
-#define NETLOGIC_GPIO_DRAM2_STATUS_REG 16
+#define GPIO_SWRESET_REG 8
+#define GPIO_DRAM1_CNTRL_REG 9
+#define GPIO_DRAM1_RATIO_REG 10
+#define GPIO_DRAM1_RESET_REG 11
+#define GPIO_DRAM1_STATUS_REG 12
+#define GPIO_DRAM2_CNTRL_REG 13
+#define GPIO_DRAM2_RATIO_REG 14
+#define GPIO_DRAM2_RESET_REG 15
+#define GPIO_DRAM2_STATUS_REG 16
-#define NETLOGIC_GPIO_PWRON_RESET_CFG_REG 21
-#define NETLOGIC_GPIO_BIST_ALL_GO_STATUS_REG 24
-#define NETLOGIC_GPIO_BIST_CPU_GO_STATUS_REG 25
-#define NETLOGIC_GPIO_BIST_DEV_GO_STATUS_REG 26
+#define GPIO_PWRON_RESET_CFG_REG 21
+#define GPIO_BIST_ALL_GO_STATUS_REG 24
+#define GPIO_BIST_CPU_GO_STATUS_REG 25
+#define GPIO_BIST_DEV_GO_STATUS_REG 26
-#define NETLOGIC_GPIO_FUSE_BANK_REG 35
-#define NETLOGIC_GPIO_CPU_RESET_REG 40
-#define NETLOGIC_GPIO_RNG_REG 43
+#define GPIO_FUSE_BANK_REG 35
+#define GPIO_CPU_RESET_REG 40
+#define GPIO_RNG_REG 43
-#define NETLOGIC_PWRON_RESET_PCMCIA_BOOT 17
-#define NETLOGIC_GPIO_LED_BITMAP 0x1700000
-#define NETLOGIC_GPIO_LED_0_SHIFT 20
-#define NETLOGIC_GPIO_LED_1_SHIFT 24
+#define PWRON_RESET_PCMCIA_BOOT 17
-#define NETLOGIC_GPIO_LED_OUTPUT_CODE_RESET 0x01
-#define NETLOGIC_GPIO_LED_OUTPUT_CODE_HARD_RESET 0x02
-#define NETLOGIC_GPIO_LED_OUTPUT_CODE_SOFT_RESET 0x03
-#define NETLOGIC_GPIO_LED_OUTPUT_CODE_MAIN 0x04
+#define GPIO_LED_BITMAP 0x1700000
+#define GPIO_LED_0_SHIFT 20
+#define GPIO_LED_1_SHIFT 24
+
+#define GPIO_LED_OUTPUT_CODE_RESET 0x01
+#define GPIO_LED_OUTPUT_CODE_HARD_RESET 0x02
+#define GPIO_LED_OUTPUT_CODE_SOFT_RESET 0x03
+#define GPIO_LED_OUTPUT_CODE_MAIN 0x04
#endif
diff --git a/arch/mips/include/asm/smtc.h b/arch/mips/include/asm/smtc.h
index c9736fc0632..8935426a56a 100644
--- a/arch/mips/include/asm/smtc.h
+++ b/arch/mips/include/asm/smtc.h
@@ -33,6 +33,12 @@ typedef long asiduse;
#endif
#endif
+/*
+ * VPE Management information
+ */
+
+#define MAX_SMTC_VPES MAX_SMTC_TLBS /* FIXME: May not always be true. */
+
extern asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
struct mm_struct;
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 653a412c036..3b92efef56d 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -687,7 +687,7 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n);
__MODULE_JAL(__copy_user) \
: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \
: \
- : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \
+ : "$8", "$9", "$10", "$11", "$12", "$14", "$15", "$24", "$31", \
DADDI_SCRATCH, "memory"); \
__cu_len_r; \
})
@@ -797,7 +797,7 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
".set\treorder" \
: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \
: \
- : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \
+ : "$8", "$9", "$10", "$11", "$12", "$14", "$15", "$24", "$31", \
DADDI_SCRATCH, "memory"); \
__cu_len_r; \
})
@@ -820,7 +820,7 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
".set\treorder" \
: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r) \
: \
- : "$8", "$9", "$10", "$11", "$12", "$15", "$24", "$31", \
+ : "$8", "$9", "$10", "$11", "$12", "$14", "$15", "$24", "$31", \
DADDI_SCRATCH, "memory"); \
__cu_len_r; \
})
diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h
index 440a21dab57..3d9f75f7ffc 100644
--- a/arch/mips/include/asm/uasm.h
+++ b/arch/mips/include/asm/uasm.h
@@ -6,6 +6,7 @@
* Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer
* Copyright (C) 2005 Maciej W. Rozycki
* Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2012 MIPS Technologies, Inc.
*/
#include <linux/types.h>
@@ -62,8 +63,10 @@ void __uasminit uasm_i##op(u32 **buf, unsigned int a, signed int b)
Ip_u2u1s3(_addiu);
Ip_u3u1u2(_addu);
-Ip_u2u1u3(_andi);
Ip_u3u1u2(_and);
+Ip_u2u1u3(_andi);
+Ip_u1u2s3(_bbit0);
+Ip_u1u2s3(_bbit1);
Ip_u1u2s3(_beq);
Ip_u1u2s3(_beql);
Ip_u1s2(_bgez);
@@ -72,55 +75,54 @@ Ip_u1s2(_bltz);
Ip_u1s2(_bltzl);
Ip_u1u2s3(_bne);
Ip_u2s3u1(_cache);
-Ip_u1u2u3(_dmfc0);
-Ip_u1u2u3(_dmtc0);
Ip_u2u1s3(_daddiu);
Ip_u3u1u2(_daddu);
+Ip_u2u1msbu3(_dins);
+Ip_u2u1msbu3(_dinsm);
+Ip_u1u2u3(_dmfc0);
+Ip_u1u2u3(_dmtc0);
+Ip_u2u1u3(_drotr);
+Ip_u2u1u3(_drotr32);
Ip_u2u1u3(_dsll);
Ip_u2u1u3(_dsll32);
Ip_u2u1u3(_dsra);
Ip_u2u1u3(_dsrl);
Ip_u2u1u3(_dsrl32);
-Ip_u2u1u3(_drotr);
-Ip_u2u1u3(_drotr32);
Ip_u3u1u2(_dsubu);
Ip_0(_eret);
Ip_u1(_j);
Ip_u1(_jal);
Ip_u1(_jr);
Ip_u2s3u1(_ld);
+Ip_u3u1u2(_ldx);
Ip_u2s3u1(_ll);
Ip_u2s3u1(_lld);
Ip_u1s2(_lui);
Ip_u2s3u1(_lw);
+Ip_u3u1u2(_lwx);
Ip_u1u2u3(_mfc0);
Ip_u1u2u3(_mtc0);
-Ip_u2u1u3(_ori);
Ip_u3u1u2(_or);
+Ip_u2u1u3(_ori);
Ip_u2s3u1(_pref);
Ip_0(_rfe);
+Ip_u2u1u3(_rotr);
Ip_u2s3u1(_sc);
Ip_u2s3u1(_scd);
Ip_u2s3u1(_sd);
Ip_u2u1u3(_sll);
Ip_u2u1u3(_sra);
Ip_u2u1u3(_srl);
-Ip_u2u1u3(_rotr);
Ip_u3u1u2(_subu);
Ip_u2s3u1(_sw);
+Ip_u1(_syscall);
Ip_0(_tlbp);
Ip_0(_tlbr);
Ip_0(_tlbwi);
Ip_0(_tlbwr);
Ip_u3u1u2(_xor);
Ip_u2u1u3(_xori);
-Ip_u2u1msbu3(_dins);
-Ip_u2u1msbu3(_dinsm);
-Ip_u1(_syscall);
-Ip_u1u2s3(_bbit0);
-Ip_u1u2s3(_bbit1);
-Ip_u3u1u2(_lwx);
-Ip_u3u1u2(_ldx);
+
/* Handle labels. */
struct uasm_label {
@@ -145,37 +147,37 @@ static inline void __uasminit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
/* convenience macros for instructions */
#ifdef CONFIG_64BIT
+# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_daddiu(buf, rs, rt, val)
+# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_daddu(buf, rs, rt, rd)
+# define UASM_i_LL(buf, rs, rt, off) uasm_i_lld(buf, rs, rt, off)
# define UASM_i_LW(buf, rs, rt, off) uasm_i_ld(buf, rs, rt, off)
-# define UASM_i_SW(buf, rs, rt, off) uasm_i_sd(buf, rs, rt, off)
+# define UASM_i_LWX(buf, rs, rt, rd) uasm_i_ldx(buf, rs, rt, rd)
+# define UASM_i_MFC0(buf, rt, rd...) uasm_i_dmfc0(buf, rt, rd)
+# define UASM_i_MTC0(buf, rt, rd...) uasm_i_dmtc0(buf, rt, rd)
+# define UASM_i_ROTR(buf, rs, rt, sh) uasm_i_drotr(buf, rs, rt, sh)
+# define UASM_i_SC(buf, rs, rt, off) uasm_i_scd(buf, rs, rt, off)
# define UASM_i_SLL(buf, rs, rt, sh) uasm_i_dsll(buf, rs, rt, sh)
# define UASM_i_SRA(buf, rs, rt, sh) uasm_i_dsra(buf, rs, rt, sh)
# define UASM_i_SRL(buf, rs, rt, sh) uasm_i_dsrl(buf, rs, rt, sh)
# define UASM_i_SRL_SAFE(buf, rs, rt, sh) uasm_i_dsrl_safe(buf, rs, rt, sh)
-# define UASM_i_ROTR(buf, rs, rt, sh) uasm_i_drotr(buf, rs, rt, sh)
-# define UASM_i_MFC0(buf, rt, rd...) uasm_i_dmfc0(buf, rt, rd)
-# define UASM_i_MTC0(buf, rt, rd...) uasm_i_dmtc0(buf, rt, rd)
-# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_daddiu(buf, rs, rt, val)
-# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_daddu(buf, rs, rt, rd)
# define UASM_i_SUBU(buf, rs, rt, rd) uasm_i_dsubu(buf, rs, rt, rd)
-# define UASM_i_LL(buf, rs, rt, off) uasm_i_lld(buf, rs, rt, off)
-# define UASM_i_SC(buf, rs, rt, off) uasm_i_scd(buf, rs, rt, off)
-# define UASM_i_LWX(buf, rs, rt, rd) uasm_i_ldx(buf, rs, rt, rd)
+# define UASM_i_SW(buf, rs, rt, off) uasm_i_sd(buf, rs, rt, off)
#else
+# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_addiu(buf, rs, rt, val)
+# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_addu(buf, rs, rt, rd)
+# define UASM_i_LL(buf, rs, rt, off) uasm_i_ll(buf, rs, rt, off)
# define UASM_i_LW(buf, rs, rt, off) uasm_i_lw(buf, rs, rt, off)
-# define UASM_i_SW(buf, rs, rt, off) uasm_i_sw(buf, rs, rt, off)
+# define UASM_i_LWX(buf, rs, rt, rd) uasm_i_lwx(buf, rs, rt, rd)
+# define UASM_i_MFC0(buf, rt, rd...) uasm_i_mfc0(buf, rt, rd)
+# define UASM_i_MTC0(buf, rt, rd...) uasm_i_mtc0(buf, rt, rd)
+# define UASM_i_ROTR(buf, rs, rt, sh) uasm_i_rotr(buf, rs, rt, sh)
+# define UASM_i_SC(buf, rs, rt, off) uasm_i_sc(buf, rs, rt, off)
# define UASM_i_SLL(buf, rs, rt, sh) uasm_i_sll(buf, rs, rt, sh)
# define UASM_i_SRA(buf, rs, rt, sh) uasm_i_sra(buf, rs, rt, sh)
# define UASM_i_SRL(buf, rs, rt, sh) uasm_i_srl(buf, rs, rt, sh)
# define UASM_i_SRL_SAFE(buf, rs, rt, sh) uasm_i_srl(buf, rs, rt, sh)
-# define UASM_i_ROTR(buf, rs, rt, sh) uasm_i_rotr(buf, rs, rt, sh)
-# define UASM_i_MFC0(buf, rt, rd...) uasm_i_mfc0(buf, rt, rd)
-# define UASM_i_MTC0(buf, rt, rd...) uasm_i_mtc0(buf, rt, rd)
-# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_addiu(buf, rs, rt, val)
-# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_addu(buf, rs, rt, rd)
# define UASM_i_SUBU(buf, rs, rt, rd) uasm_i_subu(buf, rs, rt, rd)
-# define UASM_i_LL(buf, rs, rt, off) uasm_i_ll(buf, rs, rt, off)
-# define UASM_i_SC(buf, rs, rt, off) uasm_i_sc(buf, rs, rt, off)
-# define UASM_i_LWX(buf, rs, rt, rd) uasm_i_lwx(buf, rs, rt, rd)
+# define UASM_i_SW(buf, rs, rt, off) uasm_i_sw(buf, rs, rt, off)
#endif
#define uasm_i_b(buf, off) uasm_i_beq(buf, 0, 0, off)
@@ -183,19 +185,10 @@ static inline void __uasminit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
#define uasm_i_beqzl(buf, rs, off) uasm_i_beql(buf, rs, 0, off)
#define uasm_i_bnez(buf, rs, off) uasm_i_bne(buf, rs, 0, off)
#define uasm_i_bnezl(buf, rs, off) uasm_i_bnel(buf, rs, 0, off)
+#define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
#define uasm_i_move(buf, a, b) UASM_i_ADDU(buf, a, 0, b)
#define uasm_i_nop(buf) uasm_i_sll(buf, 0, 0, 0)
#define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
-#define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
-
-static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1,
- unsigned int a2, unsigned int a3)
-{
- if (a3 < 32)
- uasm_i_dsrl(p, a1, a2, a3);
- else
- uasm_i_dsrl32(p, a1, a2, a3 - 32);
-}
static inline void uasm_i_drotr_safe(u32 **p, unsigned int a1,
unsigned int a2, unsigned int a3)
@@ -215,6 +208,15 @@ static inline void uasm_i_dsll_safe(u32 **p, unsigned int a1,
uasm_i_dsll32(p, a1, a2, a3 - 32);
}
+static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1,
+ unsigned int a2, unsigned int a3)
+{
+ if (a3 < 32)
+ uasm_i_dsrl(p, a1, a2, a3);
+ else
+ uasm_i_dsrl32(p, a1, a2, a3 - 32);
+}
+
/* Handle relocations. */
struct uasm_reloc {
u32 *addr;
@@ -234,16 +236,16 @@ void uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab,
int uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr);
/* Convenience functions for labeled branches. */
-void uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
void uasm_il_b(u32 **p, struct uasm_reloc **r, int lid);
+void uasm_il_bbit0(u32 **p, struct uasm_reloc **r, unsigned int reg,
+ unsigned int bit, int lid);
+void uasm_il_bbit1(u32 **p, struct uasm_reloc **r, unsigned int reg,
+ unsigned int bit, int lid);
void uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
void uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
void uasm_il_bne(u32 **p, struct uasm_reloc **r, unsigned int reg1,
unsigned int reg2, int lid);
void uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_bbit0(u32 **p, struct uasm_reloc **r, unsigned int reg,
- unsigned int bit, int lid);
-void uasm_il_bbit1(u32 **p, struct uasm_reloc **r, unsigned int reg,
- unsigned int bit, int lid);
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 9a91fe9de69..9a3d9de4d04 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -140,6 +140,7 @@ static void qi_lb60_nand_ident(struct platform_device *pdev,
static struct jz_nand_platform_data qi_lb60_nand_pdata = {
.ident_callback = qi_lb60_nand_ident,
.busy_gpio = 94,
+ .banks = { 1 },
};
/* Keyboard*/
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
index 10929e2bc6d..e342ed4cbd4 100644
--- a/arch/mips/jz4740/platform.c
+++ b/arch/mips/jz4740/platform.c
@@ -157,11 +157,29 @@ static struct resource jz4740_nand_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .name = "bank",
+ .name = "bank1",
.start = 0x18000000,
.end = 0x180C0000 - 1,
.flags = IORESOURCE_MEM,
},
+ {
+ .name = "bank2",
+ .start = 0x14000000,
+ .end = 0x140C0000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "bank3",
+ .start = 0x0C000000,
+ .end = 0x0C0C0000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "bank4",
+ .start = 0x08000000,
+ .end = 0x080C0000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
};
struct platform_device jz4740_nand_device = {
diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c
index 5f1fb95c0d0..6c0da5afcf1 100644
--- a/arch/mips/jz4740/reset.c
+++ b/arch/mips/jz4740/reset.c
@@ -21,6 +21,9 @@
#include <asm/mach-jz4740/base.h>
#include <asm/mach-jz4740/timer.h>
+#include "reset.h"
+#include "clock.h"
+
static void jz4740_halt(void)
{
while (1) {
@@ -53,21 +56,57 @@ static void jz4740_restart(char *command)
jz4740_halt();
}
-#define JZ_REG_RTC_CTRL 0x00
-#define JZ_REG_RTC_HIBERNATE 0x20
+#define JZ_REG_RTC_CTRL 0x00
+#define JZ_REG_RTC_HIBERNATE 0x20
+#define JZ_REG_RTC_WAKEUP_FILTER 0x24
+#define JZ_REG_RTC_RESET_COUNTER 0x28
-#define JZ_RTC_CTRL_WRDY BIT(7)
+#define JZ_RTC_CTRL_WRDY BIT(7)
+#define JZ_RTC_WAKEUP_FILTER_MASK 0x0000FFE0
+#define JZ_RTC_RESET_COUNTER_MASK 0x00000FE0
-static void jz4740_power_off(void)
+static inline void jz4740_rtc_wait_ready(void __iomem *rtc_base)
{
- void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x24);
uint32_t ctrl;
do {
ctrl = readl(rtc_base + JZ_REG_RTC_CTRL);
} while (!(ctrl & JZ_RTC_CTRL_WRDY));
+}
+static void jz4740_power_off(void)
+{
+ void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x38);
+ unsigned long wakeup_filter_ticks;
+ unsigned long reset_counter_ticks;
+
+ /*
+ * Set minimum wakeup pin assertion time: 100 ms.
+ * Range is 0 to 2 sec if RTC is clocked at 32 kHz.
+ */
+ wakeup_filter_ticks = (100 * jz4740_clock_bdata.rtc_rate) / 1000;
+ if (wakeup_filter_ticks < JZ_RTC_WAKEUP_FILTER_MASK)
+ wakeup_filter_ticks &= JZ_RTC_WAKEUP_FILTER_MASK;
+ else
+ wakeup_filter_ticks = JZ_RTC_WAKEUP_FILTER_MASK;
+ jz4740_rtc_wait_ready(rtc_base);
+ writel(wakeup_filter_ticks, rtc_base + JZ_REG_RTC_WAKEUP_FILTER);
+
+ /*
+ * Set reset pin low-level assertion time after wakeup: 60 ms.
+ * Range is 0 to 125 ms if RTC is clocked at 32 kHz.
+ */
+ reset_counter_ticks = (60 * jz4740_clock_bdata.rtc_rate) / 1000;
+ if (reset_counter_ticks < JZ_RTC_RESET_COUNTER_MASK)
+ reset_counter_ticks &= JZ_RTC_RESET_COUNTER_MASK;
+ else
+ reset_counter_ticks = JZ_RTC_RESET_COUNTER_MASK;
+ jz4740_rtc_wait_ready(rtc_base);
+ writel(reset_counter_ticks, rtc_base + JZ_REG_RTC_RESET_COUNTER);
+
+ jz4740_rtc_wait_ready(rtc_base);
writel(1, rtc_base + JZ_REG_RTC_HIBERNATE);
+
jz4740_halt();
}
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index f4630e1082a..1b51046191e 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -190,6 +190,7 @@ void __init check_wait(void)
case CPU_CAVIUM_OCTEON_PLUS:
case CPU_CAVIUM_OCTEON2:
case CPU_JZRISC:
+ case CPU_LOONGSON1:
case CPU_XLR:
case CPU_XLP:
cpu_wait = r4k_wait;
@@ -330,6 +331,154 @@ static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
#endif
}
+static char unknown_isa[] __cpuinitdata = KERN_ERR \
+ "Unsupported ISA type, c0.config0: %d.";
+
+static inline unsigned int decode_config0(struct cpuinfo_mips *c)
+{
+ unsigned int config0;
+ int isa;
+
+ config0 = read_c0_config();
+
+ if (((config0 & MIPS_CONF_MT) >> 7) == 1)
+ c->options |= MIPS_CPU_TLB;
+ isa = (config0 & MIPS_CONF_AT) >> 13;
+ switch (isa) {
+ case 0:
+ switch ((config0 & MIPS_CONF_AR) >> 10) {
+ case 0:
+ c->isa_level = MIPS_CPU_ISA_M32R1;
+ break;
+ case 1:
+ c->isa_level = MIPS_CPU_ISA_M32R2;
+ break;
+ default:
+ goto unknown;
+ }
+ break;
+ case 2:
+ switch ((config0 & MIPS_CONF_AR) >> 10) {
+ case 0:
+ c->isa_level = MIPS_CPU_ISA_M64R1;
+ break;
+ case 1:
+ c->isa_level = MIPS_CPU_ISA_M64R2;
+ break;
+ default:
+ goto unknown;
+ }
+ break;
+ default:
+ goto unknown;
+ }
+
+ return config0 & MIPS_CONF_M;
+
+unknown:
+ panic(unknown_isa, config0);
+}
+
+static inline unsigned int decode_config1(struct cpuinfo_mips *c)
+{
+ unsigned int config1;
+
+ config1 = read_c0_config1();
+
+ if (config1 & MIPS_CONF1_MD)
+ c->ases |= MIPS_ASE_MDMX;
+ if (config1 & MIPS_CONF1_WR)
+ c->options |= MIPS_CPU_WATCH;
+ if (config1 & MIPS_CONF1_CA)
+ c->ases |= MIPS_ASE_MIPS16;
+ if (config1 & MIPS_CONF1_EP)
+ c->options |= MIPS_CPU_EJTAG;
+ if (config1 & MIPS_CONF1_FP) {
+ c->options |= MIPS_CPU_FPU;
+ c->options |= MIPS_CPU_32FPR;
+ }
+ if (cpu_has_tlb)
+ c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
+
+ return config1 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config2(struct cpuinfo_mips *c)
+{
+ unsigned int config2;
+
+ config2 = read_c0_config2();
+
+ if (config2 & MIPS_CONF2_SL)
+ c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+
+ return config2 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config3(struct cpuinfo_mips *c)
+{
+ unsigned int config3;
+
+ config3 = read_c0_config3();
+
+ if (config3 & MIPS_CONF3_SM)
+ c->ases |= MIPS_ASE_SMARTMIPS;
+ if (config3 & MIPS_CONF3_DSP)
+ c->ases |= MIPS_ASE_DSP;
+ if (config3 & MIPS_CONF3_VINT)
+ c->options |= MIPS_CPU_VINT;
+ if (config3 & MIPS_CONF3_VEIC)
+ c->options |= MIPS_CPU_VEIC;
+ if (config3 & MIPS_CONF3_MT)
+ c->ases |= MIPS_ASE_MIPSMT;
+ if (config3 & MIPS_CONF3_ULRI)
+ c->options |= MIPS_CPU_ULRI;
+
+ return config3 & MIPS_CONF_M;
+}
+
+static inline unsigned int decode_config4(struct cpuinfo_mips *c)
+{
+ unsigned int config4;
+
+ config4 = read_c0_config4();
+
+ if ((config4 & MIPS_CONF4_MMUEXTDEF) == MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT
+ && cpu_has_tlb)
+ c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40;
+
+ c->kscratch_mask = (config4 >> 16) & 0xff;
+
+ return config4 & MIPS_CONF_M;
+}
+
+static void __cpuinit decode_configs(struct cpuinfo_mips *c)
+{
+ int ok;
+
+ /* MIPS32 or MIPS64 compliant CPU. */
+ c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
+ MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
+
+ c->scache.flags = MIPS_CACHE_NOT_PRESENT;
+
+ ok = decode_config0(c); /* Read Config registers. */
+ BUG_ON(!ok); /* Arch spec violation! */
+ if (ok)
+ ok = decode_config1(c);
+ if (ok)
+ ok = decode_config2(c);
+ if (ok)
+ ok = decode_config3(c);
+ if (ok)
+ ok = decode_config4(c);
+
+ mips_probe_watch_registers(c);
+
+ if (cpu_has_mips_r2)
+ c->core = read_c0_ebase() & 0x3ff;
+}
+
#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
| MIPS_CPU_COUNTER)
@@ -638,155 +787,19 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
MIPS_CPU_32FPR;
c->tlbsize = 64;
break;
- }
-}
-
-static char unknown_isa[] __cpuinitdata = KERN_ERR \
- "Unsupported ISA type, c0.config0: %d.";
+ case PRID_IMP_LOONGSON1:
+ decode_configs(c);
-static inline unsigned int decode_config0(struct cpuinfo_mips *c)
-{
- unsigned int config0;
- int isa;
+ c->cputype = CPU_LOONGSON1;
- config0 = read_c0_config();
-
- if (((config0 & MIPS_CONF_MT) >> 7) == 1)
- c->options |= MIPS_CPU_TLB;
- isa = (config0 & MIPS_CONF_AT) >> 13;
- switch (isa) {
- case 0:
- switch ((config0 & MIPS_CONF_AR) >> 10) {
- case 0:
- c->isa_level = MIPS_CPU_ISA_M32R1;
- break;
- case 1:
- c->isa_level = MIPS_CPU_ISA_M32R2;
+ switch (c->processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON1B:
+ __cpu_name[cpu] = "Loongson 1B";
break;
- default:
- goto unknown;
}
- break;
- case 2:
- switch ((config0 & MIPS_CONF_AR) >> 10) {
- case 0:
- c->isa_level = MIPS_CPU_ISA_M64R1;
- break;
- case 1:
- c->isa_level = MIPS_CPU_ISA_M64R2;
- break;
- default:
- goto unknown;
- }
- break;
- default:
- goto unknown;
- }
-
- return config0 & MIPS_CONF_M;
-
-unknown:
- panic(unknown_isa, config0);
-}
-static inline unsigned int decode_config1(struct cpuinfo_mips *c)
-{
- unsigned int config1;
-
- config1 = read_c0_config1();
-
- if (config1 & MIPS_CONF1_MD)
- c->ases |= MIPS_ASE_MDMX;
- if (config1 & MIPS_CONF1_WR)
- c->options |= MIPS_CPU_WATCH;
- if (config1 & MIPS_CONF1_CA)
- c->ases |= MIPS_ASE_MIPS16;
- if (config1 & MIPS_CONF1_EP)
- c->options |= MIPS_CPU_EJTAG;
- if (config1 & MIPS_CONF1_FP) {
- c->options |= MIPS_CPU_FPU;
- c->options |= MIPS_CPU_32FPR;
+ break;
}
- if (cpu_has_tlb)
- c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
-
- return config1 & MIPS_CONF_M;
-}
-
-static inline unsigned int decode_config2(struct cpuinfo_mips *c)
-{
- unsigned int config2;
-
- config2 = read_c0_config2();
-
- if (config2 & MIPS_CONF2_SL)
- c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
-
- return config2 & MIPS_CONF_M;
-}
-
-static inline unsigned int decode_config3(struct cpuinfo_mips *c)
-{
- unsigned int config3;
-
- config3 = read_c0_config3();
-
- if (config3 & MIPS_CONF3_SM)
- c->ases |= MIPS_ASE_SMARTMIPS;
- if (config3 & MIPS_CONF3_DSP)
- c->ases |= MIPS_ASE_DSP;
- if (config3 & MIPS_CONF3_VINT)
- c->options |= MIPS_CPU_VINT;
- if (config3 & MIPS_CONF3_VEIC)
- c->options |= MIPS_CPU_VEIC;
- if (config3 & MIPS_CONF3_MT)
- c->ases |= MIPS_ASE_MIPSMT;
- if (config3 & MIPS_CONF3_ULRI)
- c->options |= MIPS_CPU_ULRI;
-
- return config3 & MIPS_CONF_M;
-}
-
-static inline unsigned int decode_config4(struct cpuinfo_mips *c)
-{
- unsigned int config4;
-
- config4 = read_c0_config4();
-
- if ((config4 & MIPS_CONF4_MMUEXTDEF) == MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT
- && cpu_has_tlb)
- c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40;
-
- c->kscratch_mask = (config4 >> 16) & 0xff;
-
- return config4 & MIPS_CONF_M;
-}
-
-static void __cpuinit decode_configs(struct cpuinfo_mips *c)
-{
- int ok;
-
- /* MIPS32 or MIPS64 compliant CPU. */
- c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
- MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
-
- c->scache.flags = MIPS_CACHE_NOT_PRESENT;
-
- ok = decode_config0(c); /* Read Config registers. */
- BUG_ON(!ok); /* Arch spec violation! */
- if (ok)
- ok = decode_config1(c);
- if (ok)
- ok = decode_config2(c);
- if (ok)
- ok = decode_config3(c);
- if (ok)
- ok = decode_config4(c);
-
- mips_probe_watch_registers(c);
-
- if (cpu_has_mips_r2)
- c->core = read_c0_ebase() & 0x3ff;
}
static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index eb5e394a465..2f28d3b5568 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1559,6 +1559,11 @@ init_hw_perf_events(void)
mipspmu.general_event_map = &mipsxxcore_event_map;
mipspmu.cache_event_map = &mipsxxcore_cache_map;
break;
+ case CPU_LOONGSON1:
+ mipspmu.name = "mips/loongson1";
+ mipspmu.general_event_map = &mipsxxcore_event_map;
+ mipspmu.cache_event_map = &mipsxxcore_cache_map;
+ break;
case CPU_CAVIUM_OCTEON:
case CPU_CAVIUM_OCTEON_PLUS:
case CPU_CAVIUM_OCTEON2:
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 1268392f1d2..31637d8c873 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -102,7 +102,9 @@ asmlinkage __cpuinit void start_secondary(void)
#ifdef CONFIG_MIPS_MT_SMTC
/* Only do cpu_probe for first TC of CPU */
- if ((read_c0_tcbind() & TCBIND_CURTC) == 0)
+ if ((read_c0_tcbind() & TCBIND_CURTC) != 0)
+ __cpu_name[smp_processor_id()] = __cpu_name[0];
+ else
#endif /* CONFIG_MIPS_MT_SMTC */
cpu_probe();
cpu_report();
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 15b5f3cfd20..1d47843d3cc 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -86,6 +86,13 @@ struct smtc_ipi_q IPIQ[NR_CPUS];
static struct smtc_ipi_q freeIPIq;
+/*
+ * Number of FPU contexts for each VPE
+ */
+
+static int smtc_nconf1[MAX_SMTC_VPES];
+
+
/* Forward declarations */
void ipi_decode(struct smtc_ipi *);
@@ -174,9 +181,9 @@ static int __init tintq(char *str)
__setup("tintq=", tintq);
-static int imstuckcount[2][8];
+static int imstuckcount[MAX_SMTC_VPES][8];
/* vpemask represents IM/IE bits of per-VPE Status registers, low-to-high */
-static int vpemask[2][8] = {
+static int vpemask[MAX_SMTC_VPES][8] = {
{0, 0, 1, 0, 0, 0, 0, 1},
{0, 0, 0, 0, 0, 0, 0, 1}
};
@@ -331,6 +338,22 @@ int __init smtc_build_cpu_map(int start_cpu_slot)
static void smtc_tc_setup(int vpe, int tc, int cpu)
{
+ static int cp1contexts[MAX_SMTC_VPES];
+
+ /*
+ * Make a local copy of the available FPU contexts in order
+ * to keep track of TCs that can have one.
+ */
+ if (tc == 1)
+ {
+ /*
+ * FIXME: Multi-core SMTC hasn't been tested and the
+ * maximum number of VPEs may change.
+ */
+ cp1contexts[0] = smtc_nconf1[0] - 1;
+ cp1contexts[1] = smtc_nconf1[1];
+ }
+
settc(tc);
write_tc_c0_tchalt(TCHALT_H);
mips_ihb();
@@ -343,22 +366,29 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
* an active IPI queue.
*/
write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
- /* Bind tc to vpe */
+
+ /* Bind TC to VPE. */
write_tc_c0_tcbind(vpe);
+
/* In general, all TCs should have the same cpu_data indications. */
memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
- /* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */
- if (cpu_data[0].cputype == CPU_34K ||
- cpu_data[0].cputype == CPU_1004K)
+
+ /* Check to see if there is a FPU context available for this TC. */
+ if (!cp1contexts[vpe])
cpu_data[cpu].options &= ~MIPS_CPU_FPU;
+ else
+ cp1contexts[vpe]--;
+
+ /* Store the TC and VPE into the cpu_data structure. */
cpu_data[cpu].vpe_id = vpe;
cpu_data[cpu].tc_id = tc;
- /* Multi-core SMTC hasn't been tested, but be prepared */
+
+ /* FIXME: Multi-core SMTC hasn't been tested, but be prepared. */
cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff;
}
/*
- * Tweak to get Count registes in as close a sync as possible. The
+ * Tweak to get Count registers synced as closely as possible. The
* value seems good for 34K-class cores.
*/
@@ -466,6 +496,24 @@ void smtc_prepare_cpus(int cpus)
smtc_configure_tlb();
for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) {
+ /* Get number of CP1 contexts for each VPE. */
+ if (tc == 0)
+ {
+ /*
+ * Do not call settc() for TC0 or the FPU context
+ * value will be incorrect. Besides, we know that
+ * we are TC0 anyway.
+ */
+ smtc_nconf1[0] = ((read_vpe_c0_vpeconf1() &
+ VPECONF1_NCP1) >> VPECONF1_NCP1_SHIFT);
+ if (nvpe == 2)
+ {
+ settc(1);
+ smtc_nconf1[1] = ((read_vpe_c0_vpeconf1() &
+ VPECONF1_NCP1) >> VPECONF1_NCP1_SHIFT);
+ settc(0);
+ }
+ }
if (tcpervpe[vpe] == 0)
continue;
if (vpe != 0)
@@ -479,6 +527,18 @@ void smtc_prepare_cpus(int cpus)
*/
if (tc != 0) {
smtc_tc_setup(vpe, tc, cpu);
+ if (vpe != 0) {
+ /*
+ * Set MVP bit (possibly again). Do it
+ * here to catch CPUs that have no TCs
+ * bound to the VPE at reset. In that
+ * case, a TC must be bound to the VPE
+ * before we can set VPEControl[MVP]
+ */
+ write_vpe_c0_vpeconf0(
+ read_vpe_c0_vpeconf0() |
+ VPECONF0_MVP);
+ }
cpu++;
}
printk(" %d", tc);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index c3c29354370..9be3df1fa8a 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1253,6 +1253,7 @@ static inline void parity_protection_init(void)
case CPU_5KC:
case CPU_5KE:
+ case CPU_LOONGSON1:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();
/* Set the PE bit (bit 31) in the c0_errctl register. */
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 2a7c74fc15f..399a50a541d 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -2,7 +2,7 @@
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+lib-y += csum_partial.o delay.o memcpy.o memset.o \
strlen_user.o strncpy_user.o strnlen_user.o uncached.o
obj-y += iomap.o
diff --git a/arch/mips/lib/memcpy-inatomic.S b/arch/mips/lib/memcpy-inatomic.S
deleted file mode 100644
index 68853a038d3..00000000000
--- a/arch/mips/lib/memcpy-inatomic.S
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Unified implementation of memcpy, memmove and the __copy_user backend.
- *
- * Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org)
- * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc.
- * Copyright (C) 2002 Broadcom, Inc.
- * memcpy/copy_user author: Mark Vandevoorde
- * Copyright (C) 2007 Maciej W. Rozycki
- *
- * Mnemonic names for arguments to memcpy/__copy_user
- */
-
-/*
- * Hack to resolve longstanding prefetch issue
- *
- * Prefetching may be fatal on some systems if we're prefetching beyond the
- * end of memory on some systems. It's also a seriously bad idea on non
- * dma-coherent systems.
- */
-#ifdef CONFIG_DMA_NONCOHERENT
-#undef CONFIG_CPU_HAS_PREFETCH
-#endif
-#ifdef CONFIG_MIPS_MALTA
-#undef CONFIG_CPU_HAS_PREFETCH
-#endif
-
-#include <asm/asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/regdef.h>
-
-#define dst a0
-#define src a1
-#define len a2
-
-/*
- * Spec
- *
- * memcpy copies len bytes from src to dst and sets v0 to dst.
- * It assumes that
- * - src and dst don't overlap
- * - src is readable
- * - dst is writable
- * memcpy uses the standard calling convention
- *
- * __copy_user copies up to len bytes from src to dst and sets a2 (len) to
- * the number of uncopied bytes due to an exception caused by a read or write.
- * __copy_user assumes that src and dst don't overlap, and that the call is
- * implementing one of the following:
- * copy_to_user
- * - src is readable (no exceptions when reading src)
- * copy_from_user
- * - dst is writable (no exceptions when writing dst)
- * __copy_user uses a non-standard calling convention; see
- * include/asm-mips/uaccess.h
- *
- * When an exception happens on a load, the handler must
- # ensure that all of the destination buffer is overwritten to prevent
- * leaking information to user mode programs.
- */
-
-/*
- * Implementation
- */
-
-/*
- * The exception handler for loads requires that:
- * 1- AT contain the address of the byte just past the end of the source
- * of the copy,
- * 2- src_entry <= src < AT, and
- * 3- (dst - src) == (dst_entry - src_entry),
- * The _entry suffix denotes values when __copy_user was called.
- *
- * (1) is set up up by uaccess.h and maintained by not writing AT in copy_user
- * (2) is met by incrementing src by the number of bytes copied
- * (3) is met by not doing loads between a pair of increments of dst and src
- *
- * The exception handlers for stores adjust len (if necessary) and return.
- * These handlers do not need to overwrite any data.
- *
- * For __rmemcpy and memmove an exception is always a kernel bug, therefore
- * they're not protected.
- */
-
-#define EXC(inst_reg,addr,handler) \
-9: inst_reg, addr; \
- .section __ex_table,"a"; \
- PTR 9b, handler; \
- .previous
-
-/*
- * Only on the 64-bit kernel we can made use of 64-bit registers.
- */
-#ifdef CONFIG_64BIT
-#define USE_DOUBLE
-#endif
-
-#ifdef USE_DOUBLE
-
-#define LOAD ld
-#define LOADL ldl
-#define LOADR ldr
-#define STOREL sdl
-#define STORER sdr
-#define STORE sd
-#define ADD daddu
-#define SUB dsubu
-#define SRL dsrl
-#define SRA dsra
-#define SLL dsll
-#define SLLV dsllv
-#define SRLV dsrlv
-#define NBYTES 8
-#define LOG_NBYTES 3
-
-/*
- * As we are sharing code base with the mips32 tree (which use the o32 ABI
- * register definitions). We need to redefine the register definitions from
- * the n64 ABI register naming to the o32 ABI register naming.
- */
-#undef t0
-#undef t1
-#undef t2
-#undef t3
-#define t0 $8
-#define t1 $9
-#define t2 $10
-#define t3 $11
-#define t4 $12
-#define t5 $13
-#define t6 $14
-#define t7 $15
-
-#else
-
-#define LOAD lw
-#define LOADL lwl
-#define LOADR lwr
-#define STOREL swl
-#define STORER swr
-#define STORE sw
-#define ADD addu
-#define SUB subu
-#define SRL srl
-#define SLL sll
-#define SRA sra
-#define SLLV sllv
-#define SRLV srlv
-#define NBYTES 4
-#define LOG_NBYTES 2
-
-#endif /* USE_DOUBLE */
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define LDFIRST LOADR
-#define LDREST LOADL
-#define STFIRST STORER
-#define STREST STOREL
-#define SHIFT_DISCARD SLLV
-#else
-#define LDFIRST LOADL
-#define LDREST LOADR
-#define STFIRST STOREL
-#define STREST STORER
-#define SHIFT_DISCARD SRLV
-#endif
-
-#define FIRST(unit) ((unit)*NBYTES)
-#define REST(unit) (FIRST(unit)+NBYTES-1)
-#define UNIT(unit) FIRST(unit)
-
-#define ADDRMASK (NBYTES-1)
-
- .text
- .set noreorder
-#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
- .set noat
-#else
- .set at=v1
-#endif
-
-/*
- * A combined memcpy/__copy_user
- * __copy_user sets len to 0 for success; else to an upper bound of
- * the number of uncopied bytes.
- * memcpy sets v0 to dst.
- */
- .align 5
-LEAF(__copy_user_inatomic)
- /*
- * Note: dst & src may be unaligned, len may be 0
- * Temps
- */
-#define rem t8
-
- /*
- * The "issue break"s below are very approximate.
- * Issue delays for dcache fills will perturb the schedule, as will
- * load queue full replay traps, etc.
- *
- * If len < NBYTES use byte operations.
- */
- PREF( 0, 0(src) )
- PREF( 1, 0(dst) )
- sltu t2, len, NBYTES
- and t1, dst, ADDRMASK
- PREF( 0, 1*32(src) )
- PREF( 1, 1*32(dst) )
- bnez t2, .Lcopy_bytes_checklen
- and t0, src, ADDRMASK
- PREF( 0, 2*32(src) )
- PREF( 1, 2*32(dst) )
- bnez t1, .Ldst_unaligned
- nop
- bnez t0, .Lsrc_unaligned_dst_aligned
- /*
- * use delay slot for fall-through
- * src and dst are aligned; need to compute rem
- */
-.Lboth_aligned:
- SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter
- beqz t0, .Lcleanup_both_aligned # len < 8*NBYTES
- and rem, len, (8*NBYTES-1) # rem = len % (8*NBYTES)
- PREF( 0, 3*32(src) )
- PREF( 1, 3*32(dst) )
- .align 4
-1:
-EXC( LOAD t0, UNIT(0)(src), .Ll_exc)
-EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy)
-EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy)
-EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy)
- SUB len, len, 8*NBYTES
-EXC( LOAD t4, UNIT(4)(src), .Ll_exc_copy)
-EXC( LOAD t7, UNIT(5)(src), .Ll_exc_copy)
- STORE t0, UNIT(0)(dst)
- STORE t1, UNIT(1)(dst)
-EXC( LOAD t0, UNIT(6)(src), .Ll_exc_copy)
-EXC( LOAD t1, UNIT(7)(src), .Ll_exc_copy)
- ADD src, src, 8*NBYTES
- ADD dst, dst, 8*NBYTES
- STORE t2, UNIT(-6)(dst)
- STORE t3, UNIT(-5)(dst)
- STORE t4, UNIT(-4)(dst)
- STORE t7, UNIT(-3)(dst)
- STORE t0, UNIT(-2)(dst)
- STORE t1, UNIT(-1)(dst)
- PREF( 0, 8*32(src) )
- PREF( 1, 8*32(dst) )
- bne len, rem, 1b
- nop
-
- /*
- * len == rem == the number of bytes left to copy < 8*NBYTES
- */
-.Lcleanup_both_aligned:
- beqz len, .Ldone
- sltu t0, len, 4*NBYTES
- bnez t0, .Lless_than_4units
- and rem, len, (NBYTES-1) # rem = len % NBYTES
- /*
- * len >= 4*NBYTES
- */
-EXC( LOAD t0, UNIT(0)(src), .Ll_exc)
-EXC( LOAD t1, UNIT(1)(src), .Ll_exc_copy)
-EXC( LOAD t2, UNIT(2)(src), .Ll_exc_copy)
-EXC( LOAD t3, UNIT(3)(src), .Ll_exc_copy)
- SUB len, len, 4*NBYTES
- ADD src, src, 4*NBYTES
- STORE t0, UNIT(0)(dst)
- STORE t1, UNIT(1)(dst)
- STORE t2, UNIT(2)(dst)
- STORE t3, UNIT(3)(dst)
- .set reorder /* DADDI_WAR */
- ADD dst, dst, 4*NBYTES
- beqz len, .Ldone
- .set noreorder
-.Lless_than_4units:
- /*
- * rem = len % NBYTES
- */
- beq rem, len, .Lcopy_bytes
- nop
-1:
-EXC( LOAD t0, 0(src), .Ll_exc)
- ADD src, src, NBYTES
- SUB len, len, NBYTES
- STORE t0, 0(dst)
- .set reorder /* DADDI_WAR */
- ADD dst, dst, NBYTES
- bne rem, len, 1b
- .set noreorder
-
- /*
- * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
- * A loop would do only a byte at a time with possible branch
- * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE
- * because can't assume read-access to dst. Instead, use
- * STREST dst, which doesn't require read access to dst.
- *
- * This code should perform better than a simple loop on modern,
- * wide-issue mips processors because the code has fewer branches and
- * more instruction-level parallelism.
- */
-#define bits t2
- beqz len, .Ldone
- ADD t1, dst, len # t1 is just past last byte of dst
- li bits, 8*NBYTES
- SLL rem, len, 3 # rem = number of bits to keep
-EXC( LOAD t0, 0(src), .Ll_exc)
- SUB bits, bits, rem # bits = number of bits to discard
- SHIFT_DISCARD t0, t0, bits
- STREST t0, -1(t1)
- jr ra
- move len, zero
-.Ldst_unaligned:
- /*
- * dst is unaligned
- * t0 = src & ADDRMASK
- * t1 = dst & ADDRMASK; T1 > 0
- * len >= NBYTES
- *
- * Copy enough bytes to align dst
- * Set match = (src and dst have same alignment)
- */
-#define match rem
-EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc)
- ADD t2, zero, NBYTES
-EXC( LDREST t3, REST(0)(src), .Ll_exc_copy)
- SUB t2, t2, t1 # t2 = number of bytes copied
- xor match, t0, t1
- STFIRST t3, FIRST(0)(dst)
- beq len, t2, .Ldone
- SUB len, len, t2
- ADD dst, dst, t2
- beqz match, .Lboth_aligned
- ADD src, src, t2
-
-.Lsrc_unaligned_dst_aligned:
- SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter
- PREF( 0, 3*32(src) )
- beqz t0, .Lcleanup_src_unaligned
- and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES
- PREF( 1, 3*32(dst) )
-1:
-/*
- * Avoid consecutive LD*'s to the same register since some mips
- * implementations can't issue them in the same cycle.
- * It's OK to load FIRST(N+1) before REST(N) because the two addresses
- * are to the same unit (unless src is aligned, but it's not).
- */
-EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc)
-EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy)
- SUB len, len, 4*NBYTES
-EXC( LDREST t0, REST(0)(src), .Ll_exc_copy)
-EXC( LDREST t1, REST(1)(src), .Ll_exc_copy)
-EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy)
-EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy)
-EXC( LDREST t2, REST(2)(src), .Ll_exc_copy)
-EXC( LDREST t3, REST(3)(src), .Ll_exc_copy)
- PREF( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed)
- ADD src, src, 4*NBYTES
-#ifdef CONFIG_CPU_SB1
- nop # improves slotting
-#endif
- STORE t0, UNIT(0)(dst)
- STORE t1, UNIT(1)(dst)
- STORE t2, UNIT(2)(dst)
- STORE t3, UNIT(3)(dst)
- PREF( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed)
- .set reorder /* DADDI_WAR */
- ADD dst, dst, 4*NBYTES
- bne len, rem, 1b
- .set noreorder
-
-.Lcleanup_src_unaligned:
- beqz len, .Ldone
- and rem, len, NBYTES-1 # rem = len % NBYTES
- beq rem, len, .Lcopy_bytes
- nop
-1:
-EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc)
-EXC( LDREST t0, REST(0)(src), .Ll_exc_copy)
- ADD src, src, NBYTES
- SUB len, len, NBYTES
- STORE t0, 0(dst)
- .set reorder /* DADDI_WAR */
- ADD dst, dst, NBYTES
- bne len, rem, 1b
- .set noreorder
-
-.Lcopy_bytes_checklen:
- beqz len, .Ldone
- nop
-.Lcopy_bytes:
- /* 0 < len < NBYTES */
-#define COPY_BYTE(N) \
-EXC( lb t0, N(src), .Ll_exc); \
- SUB len, len, 1; \
- beqz len, .Ldone; \
- sb t0, N(dst)
-
- COPY_BYTE(0)
- COPY_BYTE(1)
-#ifdef USE_DOUBLE
- COPY_BYTE(2)
- COPY_BYTE(3)
- COPY_BYTE(4)
- COPY_BYTE(5)
-#endif
-EXC( lb t0, NBYTES-2(src), .Ll_exc)
- SUB len, len, 1
- jr ra
- sb t0, NBYTES-2(dst)
-.Ldone:
- jr ra
- nop
- END(__copy_user_inatomic)
-
-.Ll_exc_copy:
- /*
- * Copy bytes from src until faulting load address (or until a
- * lb faults)
- *
- * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28)
- * may be more than a byte beyond the last address.
- * Hence, the lb below may get an exception.
- *
- * Assumes src < THREAD_BUADDR($28)
- */
- LOAD t0, TI_TASK($28)
- nop
- LOAD t0, THREAD_BUADDR(t0)
-1:
-EXC( lb t1, 0(src), .Ll_exc)
- ADD src, src, 1
- sb t1, 0(dst) # can't fault -- we're copy_from_user
- .set reorder /* DADDI_WAR */
- ADD dst, dst, 1
- bne src, t0, 1b
- .set noreorder
-.Ll_exc:
- LOAD t0, TI_TASK($28)
- nop
- LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address
- nop
- SUB len, AT, t0 # len number of uncopied bytes
- jr ra
- nop
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index 56a1f85a1ce..65192c06781 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -183,6 +183,14 @@
#endif
/*
+ * t6 is used as a flag to note inatomic mode.
+ */
+LEAF(__copy_user_inatomic)
+ b __copy_user_common
+ li t6, 1
+ END(__copy_user_inatomic)
+
+/*
* A combined memcpy/__copy_user
* __copy_user sets len to 0 for success; else to an upper bound of
* the number of uncopied bytes.
@@ -193,6 +201,8 @@ LEAF(memcpy) /* a0=dst a1=src a2=len */
move v0, dst /* return value */
.L__memcpy:
FEXPORT(__copy_user)
+ li t6, 0 /* not inatomic */
+__copy_user_common:
/*
* Note: dst & src may be unaligned, len may be 0
* Temps
@@ -458,6 +468,7 @@ EXC( lb t1, 0(src), .Ll_exc)
LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address
nop
SUB len, AT, t0 # len number of uncopied bytes
+ bnez t6, .Ldone /* Skip the zeroing part if inatomic */
/*
* Here's where we rely on src and dst being incremented in tandem,
* See (3) above.
diff --git a/arch/mips/loongson1/Kconfig b/arch/mips/loongson1/Kconfig
new file mode 100644
index 00000000000..237fa214de9
--- /dev/null
+++ b/arch/mips/loongson1/Kconfig
@@ -0,0 +1,21 @@
+if MACH_LOONGSON1
+
+choice
+ prompt "Machine Type"
+
+config LOONGSON1_LS1B
+ bool "Loongson LS1B board"
+ select CEVT_R4K
+ select CSRC_R4K
+ select SYS_HAS_CPU_LOONGSON1B
+ select DMA_NONCOHERENT
+ select BOOT_ELF32
+ select IRQ_CPU
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_HAS_EARLY_PRINTK
+
+endchoice
+
+endif # MACH_LOONGSON1
diff --git a/arch/mips/loongson1/Makefile b/arch/mips/loongson1/Makefile
new file mode 100644
index 00000000000..9719c75886f
--- /dev/null
+++ b/arch/mips/loongson1/Makefile
@@ -0,0 +1,11 @@
+#
+# Common code for all Loongson 1 based systems
+#
+
+obj-$(CONFIG_MACH_LOONGSON1) += common/
+
+#
+# Loongson LS1B board
+#
+
+obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
diff --git a/arch/mips/loongson1/Platform b/arch/mips/loongson1/Platform
new file mode 100644
index 00000000000..99bdefe627a
--- /dev/null
+++ b/arch/mips/loongson1/Platform
@@ -0,0 +1,7 @@
+cflags-$(CONFIG_CPU_LOONGSON1) += \
+ $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
+ -Wa,-mips32r2 -Wa,--trap
+
+platform-$(CONFIG_MACH_LOONGSON1) += loongson1/
+cflags-$(CONFIG_MACH_LOONGSON1) += -I$(srctree)/arch/mips/include/asm/mach-loongson1
+load-$(CONFIG_LOONGSON1_LS1B) += 0xffffffff80100000
diff --git a/arch/mips/loongson1/common/Makefile b/arch/mips/loongson1/common/Makefile
new file mode 100644
index 00000000000..b2797709ef5
--- /dev/null
+++ b/arch/mips/loongson1/common/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for common code of loongson1 based machines.
+#
+
+obj-y += clock.o irq.o platform.o prom.o reset.o setup.o
diff --git a/arch/mips/loongson1/common/clock.c b/arch/mips/loongson1/common/clock.c
new file mode 100644
index 00000000000..2d98fb03059
--- /dev/null
+++ b/arch/mips/loongson1/common/clock.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <asm/clock.h>
+#include <asm/time.h>
+
+#include <loongson1.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+struct clk *clk_get(struct device *dev, const char *name)
+{
+ struct clk *c;
+ struct clk *ret = NULL;
+
+ mutex_lock(&clocks_mutex);
+ list_for_each_entry(c, &clocks, node) {
+ if (!strcmp(c->name, name)) {
+ ret = c;
+ break;
+ }
+ }
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_get);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static void pll_clk_init(struct clk *clk)
+{
+ u32 pll;
+
+ pll = __raw_readl(LS1X_CLK_PLL_FREQ);
+ clk->rate = (12 + (pll & 0x3f)) * 33 / 2
+ + ((pll >> 8) & 0x3ff) * 33 / 1024 / 2;
+ clk->rate *= 1000000;
+}
+
+static void cpu_clk_init(struct clk *clk)
+{
+ u32 pll, ctrl;
+
+ pll = clk_get_rate(clk->parent);
+ ctrl = __raw_readl(LS1X_CLK_PLL_DIV) & DIV_CPU;
+ clk->rate = pll / (ctrl >> DIV_CPU_SHIFT);
+}
+
+static void ddr_clk_init(struct clk *clk)
+{
+ u32 pll, ctrl;
+
+ pll = clk_get_rate(clk->parent);
+ ctrl = __raw_readl(LS1X_CLK_PLL_DIV) & DIV_DDR;
+ clk->rate = pll / (ctrl >> DIV_DDR_SHIFT);
+}
+
+static void dc_clk_init(struct clk *clk)
+{
+ u32 pll, ctrl;
+
+ pll = clk_get_rate(clk->parent);
+ ctrl = __raw_readl(LS1X_CLK_PLL_DIV) & DIV_DC;
+ clk->rate = pll / (ctrl >> DIV_DC_SHIFT);
+}
+
+static struct clk_ops pll_clk_ops = {
+ .init = pll_clk_init,
+};
+
+static struct clk_ops cpu_clk_ops = {
+ .init = cpu_clk_init,
+};
+
+static struct clk_ops ddr_clk_ops = {
+ .init = ddr_clk_init,
+};
+
+static struct clk_ops dc_clk_ops = {
+ .init = dc_clk_init,
+};
+
+static struct clk pll_clk = {
+ .name = "pll",
+ .ops = &pll_clk_ops,
+};
+
+static struct clk cpu_clk = {
+ .name = "cpu",
+ .parent = &pll_clk,
+ .ops = &cpu_clk_ops,
+};
+
+static struct clk ddr_clk = {
+ .name = "ddr",
+ .parent = &pll_clk,
+ .ops = &ddr_clk_ops,
+};
+
+static struct clk dc_clk = {
+ .name = "dc",
+ .parent = &pll_clk,
+ .ops = &dc_clk_ops,
+};
+
+int clk_register(struct clk *clk)
+{
+ mutex_lock(&clocks_mutex);
+ list_add(&clk->node, &clocks);
+ if (clk->ops->init)
+ clk->ops->init(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+static struct clk *ls1x_clks[] = {
+ &pll_clk,
+ &cpu_clk,
+ &ddr_clk,
+ &dc_clk,
+};
+
+int __init ls1x_clock_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ls1x_clks); i++)
+ clk_register(ls1x_clks[i]);
+
+ return 0;
+}
+
+void __init plat_time_init(void)
+{
+ struct clk *clk;
+
+ /* Initialize LS1X clocks */
+ ls1x_clock_init();
+
+ /* setup mips r4k timer */
+ clk = clk_get(NULL, "cpu");
+ if (IS_ERR(clk))
+ panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
+
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
+}
diff --git a/arch/mips/loongson1/common/irq.c b/arch/mips/loongson1/common/irq.c
new file mode 100644
index 00000000000..41bc8ffe7bb
--- /dev/null
+++ b/arch/mips/loongson1/common/irq.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq_cpu.h>
+
+#include <loongson1.h>
+#include <irq.h>
+
+#define LS1X_INTC_REG(n, x) \
+ ((void __iomem *)KSEG1ADDR(LS1X_INTC_BASE + (n * 0x18) + (x)))
+
+#define LS1X_INTC_INTISR(n) LS1X_INTC_REG(n, 0x0)
+#define LS1X_INTC_INTIEN(n) LS1X_INTC_REG(n, 0x4)
+#define LS1X_INTC_INTSET(n) LS1X_INTC_REG(n, 0x8)
+#define LS1X_INTC_INTCLR(n) LS1X_INTC_REG(n, 0xc)
+#define LS1X_INTC_INTPOL(n) LS1X_INTC_REG(n, 0x10)
+#define LS1X_INTC_INTEDGE(n) LS1X_INTC_REG(n, 0x14)
+
+static void ls1x_irq_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
+ | (1 << bit), LS1X_INTC_INTCLR(n));
+}
+
+static void ls1x_irq_mask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ & ~(1 << bit), LS1X_INTC_INTIEN(n));
+}
+
+static void ls1x_irq_mask_ack(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ & ~(1 << bit), LS1X_INTC_INTIEN(n));
+ __raw_writel(__raw_readl(LS1X_INTC_INTCLR(n))
+ | (1 << bit), LS1X_INTC_INTCLR(n));
+}
+
+static void ls1x_irq_unmask(struct irq_data *d)
+{
+ unsigned int bit = (d->irq - LS1X_IRQ_BASE) & 0x1f;
+ unsigned int n = (d->irq - LS1X_IRQ_BASE) >> 5;
+
+ __raw_writel(__raw_readl(LS1X_INTC_INTIEN(n))
+ | (1 << bit), LS1X_INTC_INTIEN(n));
+}
+
+static struct irq_chip ls1x_irq_chip = {
+ .name = "LS1X-INTC",
+ .irq_ack = ls1x_irq_ack,
+ .irq_mask = ls1x_irq_mask,
+ .irq_mask_ack = ls1x_irq_mask_ack,
+ .irq_unmask = ls1x_irq_unmask,
+};
+
+static void ls1x_irq_dispatch(int n)
+{
+ u32 int_status, irq;
+
+ /* Get pending sources, masked by current enables */
+ int_status = __raw_readl(LS1X_INTC_INTISR(n)) &
+ __raw_readl(LS1X_INTC_INTIEN(n));
+
+ if (int_status) {
+ irq = LS1X_IRQ(n, __ffs(int_status));
+ do_IRQ(irq);
+ }
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ unsigned int pending;
+
+ pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+ if (pending & CAUSEF_IP7)
+ do_IRQ(TIMER_IRQ);
+ else if (pending & CAUSEF_IP2)
+ ls1x_irq_dispatch(0); /* INT0 */
+ else if (pending & CAUSEF_IP3)
+ ls1x_irq_dispatch(1); /* INT1 */
+ else if (pending & CAUSEF_IP4)
+ ls1x_irq_dispatch(2); /* INT2 */
+ else if (pending & CAUSEF_IP5)
+ ls1x_irq_dispatch(3); /* INT3 */
+ else if (pending & CAUSEF_IP6)
+ ls1x_irq_dispatch(4); /* INT4 */
+ else
+ spurious_interrupt();
+
+}
+
+struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+ .flags = IRQF_NO_THREAD,
+};
+
+static void __init ls1x_irq_init(int base)
+{
+ int n;
+
+ /* Disable interrupts and clear pending,
+ * setup all IRQs as high level triggered
+ */
+ for (n = 0; n < 4; n++) {
+ __raw_writel(0x0, LS1X_INTC_INTIEN(n));
+ __raw_writel(0xffffffff, LS1X_INTC_INTCLR(n));
+ __raw_writel(0xffffffff, LS1X_INTC_INTPOL(n));
+ /* set DMA0, DMA1 and DMA2 to edge trigger */
+ __raw_writel(n ? 0x0 : 0xe000, LS1X_INTC_INTEDGE(n));
+ }
+
+
+ for (n = base; n < LS1X_IRQS; n++) {
+ irq_set_chip_and_handler(n, &ls1x_irq_chip,
+ handle_level_irq);
+ }
+
+ setup_irq(INT0_IRQ, &cascade_irqaction);
+ setup_irq(INT1_IRQ, &cascade_irqaction);
+ setup_irq(INT2_IRQ, &cascade_irqaction);
+ setup_irq(INT3_IRQ, &cascade_irqaction);
+}
+
+void __init arch_init_irq(void)
+{
+ mips_cpu_irq_init();
+ ls1x_irq_init(LS1X_IRQ_BASE);
+}
diff --git a/arch/mips/loongson1/common/platform.c b/arch/mips/loongson1/common/platform.c
new file mode 100644
index 00000000000..e92d59c4bd7
--- /dev/null
+++ b/arch/mips/loongson1/common/platform.c
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/phy.h>
+#include <linux/serial_8250.h>
+#include <linux/stmmac.h>
+#include <asm-generic/sizes.h>
+
+#include <loongson1.h>
+
+#define LS1X_UART(_id) \
+ { \
+ .mapbase = LS1X_UART ## _id ## _BASE, \
+ .irq = LS1X_UART ## _id ## _IRQ, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_IOREMAP | UPF_FIXED_TYPE, \
+ .type = PORT_16550A, \
+ }
+
+static struct plat_serial8250_port ls1x_serial8250_port[] = {
+ LS1X_UART(0),
+ LS1X_UART(1),
+ LS1X_UART(2),
+ LS1X_UART(3),
+ {},
+};
+
+struct platform_device ls1x_uart_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = ls1x_serial8250_port,
+ },
+};
+
+void __init ls1x_serial_setup(void)
+{
+ struct clk *clk;
+ struct plat_serial8250_port *p;
+
+ clk = clk_get(NULL, "dc");
+ if (IS_ERR(clk))
+ panic("unable to get dc clock, err=%ld", PTR_ERR(clk));
+
+ for (p = ls1x_serial8250_port; p->flags != 0; ++p)
+ p->uartclk = clk_get_rate(clk);
+}
+
+/* Synopsys Ethernet GMAC */
+static struct resource ls1x_eth0_resources[] = {
+ [0] = {
+ .start = LS1X_GMAC0_BASE,
+ .end = LS1X_GMAC0_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "macirq",
+ .start = LS1X_GMAC0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
+ .bus_id = 0,
+ .phy_mask = 0,
+};
+
+static struct plat_stmmacenet_data ls1x_eth_data = {
+ .bus_id = 0,
+ .phy_addr = -1,
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .has_gmac = 1,
+ .tx_coe = 1,
+};
+
+struct platform_device ls1x_eth0_device = {
+ .name = "stmmaceth",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ls1x_eth0_resources),
+ .resource = ls1x_eth0_resources,
+ .dev = {
+ .platform_data = &ls1x_eth_data,
+ },
+};
+
+/* USB EHCI */
+static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ls1x_ehci_resources[] = {
+ [0] = {
+ .start = LS1X_EHCI_BASE,
+ .end = LS1X_EHCI_BASE + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LS1X_EHCI_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_ehci_device = {
+ .name = "ls1x-ehci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_ehci_resources),
+ .resource = ls1x_ehci_resources,
+ .dev = {
+ .dma_mask = &ls1x_ehci_dmamask,
+ },
+};
+
+/* Real Time Clock */
+struct platform_device ls1x_rtc_device = {
+ .name = "ls1x-rtc",
+ .id = -1,
+};
diff --git a/arch/mips/loongson1/common/prom.c b/arch/mips/loongson1/common/prom.c
new file mode 100644
index 00000000000..1f8e49f9886
--- /dev/null
+++ b/arch/mips/loongson1/common/prom.c
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * Modified from arch/mips/pnx833x/common/prom.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/bootinfo.h>
+
+#include <loongson1.h>
+#include <prom.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+unsigned long memsize, highmemsize;
+
+char *prom_getenv(char *envname)
+{
+ char **env = prom_envp;
+ int i;
+
+ i = strlen(envname);
+
+ while (*env) {
+ if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=')
+ return *env + i + 1;
+ env++;
+ }
+
+ return 0;
+}
+
+static inline unsigned long env_or_default(char *env, unsigned long dfl)
+{
+ char *str = prom_getenv(env);
+ return str ? simple_strtol(str, 0, 0) : dfl;
+}
+
+void __init prom_init_cmdline(void)
+{
+ char *c = &(arcs_cmdline[0]);
+ int i;
+
+ for (i = 1; i < prom_argc; i++) {
+ strcpy(c, prom_argv[i]);
+ c += strlen(prom_argv[i]);
+ if (i < prom_argc-1)
+ *c++ = ' ';
+ }
+ *c = 0;
+}
+
+void __init prom_init(void)
+{
+ prom_argc = fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
+
+ prom_init_cmdline();
+
+ memsize = env_or_default("memsize", DEFAULT_MEMSIZE);
+ highmemsize = env_or_default("highmemsize", 0x0);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+#define PORT(offset) (u8 *)(KSEG1ADDR(LS1X_UART0_BASE + offset))
+
+void __init prom_putchar(char c)
+{
+ int timeout;
+
+ timeout = 1024;
+
+ while (((readb(PORT(UART_LSR)) & UART_LSR_THRE) == 0)
+ && (timeout-- > 0))
+ ;
+
+ writeb(c, PORT(UART_TX));
+}
diff --git a/arch/mips/loongson1/common/reset.c b/arch/mips/loongson1/common/reset.c
new file mode 100644
index 00000000000..fb979a784ec
--- /dev/null
+++ b/arch/mips/loongson1/common/reset.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+
+#include <loongson1.h>
+
+static void ls1x_restart(char *command)
+{
+ __raw_writel(0x1, LS1X_WDT_EN);
+ __raw_writel(0x5000000, LS1X_WDT_TIMER);
+ __raw_writel(0x1, LS1X_WDT_SET);
+}
+
+static void ls1x_halt(void)
+{
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
+}
+
+static void ls1x_power_off(void)
+{
+ ls1x_halt();
+}
+
+static int __init ls1x_reboot_setup(void)
+{
+ _machine_restart = ls1x_restart;
+ _machine_halt = ls1x_halt;
+ pm_power_off = ls1x_power_off;
+
+ return 0;
+}
+
+arch_initcall(ls1x_reboot_setup);
diff --git a/arch/mips/loongson1/common/setup.c b/arch/mips/loongson1/common/setup.c
new file mode 100644
index 00000000000..62128cc27e6
--- /dev/null
+++ b/arch/mips/loongson1/common/setup.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bootinfo.h>
+
+#include <prom.h>
+
+void __init plat_mem_setup(void)
+{
+ add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+}
+
+const char *get_system_type(void)
+{
+ unsigned int processor_id = (&current_cpu_data)->processor_id;
+
+ switch (processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON1B:
+ return "LOONGSON LS1B";
+ default:
+ return "LOONGSON (unknown)";
+ }
+}
diff --git a/arch/mips/loongson1/ls1b/Makefile b/arch/mips/loongson1/ls1b/Makefile
new file mode 100644
index 00000000000..891eac482b8
--- /dev/null
+++ b/arch/mips/loongson1/ls1b/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for loongson1B based machines.
+#
+
+obj-y += board.o
diff --git a/arch/mips/loongson1/ls1b/board.c b/arch/mips/loongson1/ls1b/board.c
new file mode 100644
index 00000000000..295b1be893e
--- /dev/null
+++ b/arch/mips/loongson1/ls1b/board.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <platform.h>
+
+#include <linux/serial_8250.h>
+#include <loongson1.h>
+
+static struct platform_device *ls1b_platform_devices[] __initdata = {
+ &ls1x_uart_device,
+ &ls1x_eth0_device,
+ &ls1x_ehci_device,
+ &ls1x_rtc_device,
+};
+
+static int __init ls1b_platform_init(void)
+{
+ int err;
+
+ ls1x_serial_setup();
+
+ err = platform_add_devices(ls1b_platform_devices,
+ ARRAY_SIZE(ls1b_platform_devices));
+ return err;
+}
+
+arch_initcall(ls1b_platform_init);
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index 5fa185151fc..64a28e81906 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -58,18 +58,16 @@ enum fields {
enum opcode {
insn_invalid,
- insn_addu, insn_addiu, insn_and, insn_andi, insn_beq,
- insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
- insn_bne, insn_cache, insn_daddu, insn_daddiu, insn_dmfc0,
- insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
- insn_dsrl32, insn_drotr, insn_drotr32, insn_dsubu, insn_eret,
- insn_j, insn_jal, insn_jr, insn_ld, insn_ll, insn_lld,
- insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_or, insn_ori,
- insn_pref, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll,
- insn_sra, insn_srl, insn_rotr, insn_subu, insn_sw, insn_tlbp,
+ insn_addiu, insn_addu, insn_and, insn_andi, insn_bbit0, insn_bbit1,
+ insn_beq, insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
+ insn_bne, insn_cache, insn_daddiu, insn_daddu, insn_dins, insn_dinsm,
+ insn_dmfc0, insn_dmtc0, insn_drotr, insn_drotr32, insn_dsll,
+ insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32, insn_dsubu, insn_eret,
+ insn_j, insn_jal, insn_jr, insn_ld, insn_ldx, insn_ll, insn_lld,
+ insn_lui, insn_lw, insn_lwx, insn_mfc0, insn_mtc0, insn_or, insn_ori,
+ insn_pref, insn_rfe, insn_rotr, insn_sc, insn_scd, insn_sd, insn_sll,
+ insn_sra, insn_srl, insn_subu, insn_sw, insn_syscall, insn_tlbp,
insn_tlbr, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori,
- insn_dins, insn_dinsm, insn_syscall, insn_bbit0, insn_bbit1,
- insn_lwx, insn_ldx
};
struct insn {
@@ -90,65 +88,65 @@ struct insn {
static struct insn insn_table[] __uasminitdata = {
{ insn_addiu, M(addiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_addu, M(spec_op, 0, 0, 0, 0, addu_op), RS | RT | RD },
- { insn_and, M(spec_op, 0, 0, 0, 0, and_op), RS | RT | RD },
{ insn_andi, M(andi_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
- { insn_beq, M(beq_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
+ { insn_and, M(spec_op, 0, 0, 0, 0, and_op), RS | RT | RD },
+ { insn_bbit0, M(lwc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
+ { insn_bbit1, M(swc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
{ insn_beql, M(beql_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_bgez, M(bcond_op, 0, bgez_op, 0, 0, 0), RS | BIMM },
+ { insn_beq, M(beq_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
{ insn_bgezl, M(bcond_op, 0, bgezl_op, 0, 0, 0), RS | BIMM },
- { insn_bltz, M(bcond_op, 0, bltz_op, 0, 0, 0), RS | BIMM },
+ { insn_bgez, M(bcond_op, 0, bgez_op, 0, 0, 0), RS | BIMM },
{ insn_bltzl, M(bcond_op, 0, bltzl_op, 0, 0, 0), RS | BIMM },
+ { insn_bltz, M(bcond_op, 0, bltz_op, 0, 0, 0), RS | BIMM },
{ insn_bne, M(bne_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
{ insn_cache, M(cache_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_daddiu, M(daddiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_daddu, M(spec_op, 0, 0, 0, 0, daddu_op), RS | RT | RD },
+ { insn_dinsm, M(spec3_op, 0, 0, 0, 0, dinsm_op), RS | RT | RD | RE },
+ { insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE },
{ insn_dmfc0, M(cop0_op, dmfc_op, 0, 0, 0, 0), RT | RD | SET},
{ insn_dmtc0, M(cop0_op, dmtc_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_dsll, M(spec_op, 0, 0, 0, 0, dsll_op), RT | RD | RE },
+ { insn_drotr32, M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE },
+ { insn_drotr, M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE },
{ insn_dsll32, M(spec_op, 0, 0, 0, 0, dsll32_op), RT | RD | RE },
+ { insn_dsll, M(spec_op, 0, 0, 0, 0, dsll_op), RT | RD | RE },
{ insn_dsra, M(spec_op, 0, 0, 0, 0, dsra_op), RT | RD | RE },
- { insn_dsrl, M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE },
{ insn_dsrl32, M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE },
- { insn_drotr, M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE },
- { insn_drotr32, M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE },
+ { insn_dsrl, M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE },
{ insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD },
{ insn_eret, M(cop0_op, cop_op, 0, 0, 0, eret_op), 0 },
- { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
{ insn_jal, M(jal_op, 0, 0, 0, 0, 0), JIMM },
+ { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
{ insn_jr, M(spec_op, 0, 0, 0, 0, jr_op), RS },
{ insn_ld, M(ld_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_ll, M(ll_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ { insn_ldx, M(spec3_op, 0, 0, 0, ldx_op, lx_op), RS | RT | RD },
{ insn_lld, M(lld_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ { insn_ll, M(ll_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_lui, M(lui_op, 0, 0, 0, 0, 0), RT | SIMM },
{ insn_lw, M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ { insn_lwx, M(spec3_op, 0, 0, 0, lwx_op, lx_op), RS | RT | RD },
{ insn_mfc0, M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET},
{ insn_mtc0, M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_or, M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD },
{ insn_ori, M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
+ { insn_or, M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD },
{ insn_pref, M(pref_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_rfe, M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0 },
- { insn_sc, M(sc_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ { insn_rotr, M(spec_op, 1, 0, 0, 0, srl_op), RT | RD | RE },
{ insn_scd, M(scd_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ { insn_sc, M(sc_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_sd, M(sd_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_sll, M(spec_op, 0, 0, 0, 0, sll_op), RT | RD | RE },
{ insn_sra, M(spec_op, 0, 0, 0, 0, sra_op), RT | RD | RE },
{ insn_srl, M(spec_op, 0, 0, 0, 0, srl_op), RT | RD | RE },
- { insn_rotr, M(spec_op, 1, 0, 0, 0, srl_op), RT | RD | RE },
{ insn_subu, M(spec_op, 0, 0, 0, 0, subu_op), RS | RT | RD },
{ insn_sw, M(sw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ { insn_syscall, M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM},
{ insn_tlbp, M(cop0_op, cop_op, 0, 0, 0, tlbp_op), 0 },
{ insn_tlbr, M(cop0_op, cop_op, 0, 0, 0, tlbr_op), 0 },
{ insn_tlbwi, M(cop0_op, cop_op, 0, 0, 0, tlbwi_op), 0 },
{ insn_tlbwr, M(cop0_op, cop_op, 0, 0, 0, tlbwr_op), 0 },
- { insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD },
{ insn_xori, M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
- { insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE },
- { insn_dinsm, M(spec3_op, 0, 0, 0, 0, dinsm_op), RS | RT | RD | RE },
- { insn_syscall, M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM},
- { insn_bbit0, M(lwc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_bbit1, M(swc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_lwx, M(spec3_op, 0, 0, 0, lwx_op, lx_op), RS | RT | RD },
- { insn_ldx, M(spec3_op, 0, 0, 0, ldx_op, lx_op), RS | RT | RD },
+ { insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD },
{ insn_invalid, 0, 0 }
};
diff --git a/arch/mips/netlogic/common/earlycons.c b/arch/mips/netlogic/common/earlycons.c
index f193f7b3bd8..1902fa22d27 100644
--- a/arch/mips/netlogic/common/earlycons.c
+++ b/arch/mips/netlogic/common/earlycons.c
@@ -54,7 +54,7 @@ void prom_putchar(char c)
#elif defined(CONFIG_CPU_XLR)
uartbase = nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
#endif
- while (nlm_read_reg(uartbase, UART_LSR) == 0)
+ while ((nlm_read_reg(uartbase, UART_LSR) & UART_LSR_THRE) == 0)
;
nlm_write_reg(uartbase, UART_TX, c);
}
diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
index c138b1a6dec..a13355cc97e 100644
--- a/arch/mips/netlogic/common/smpboot.S
+++ b/arch/mips/netlogic/common/smpboot.S
@@ -54,28 +54,68 @@
XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
SYS_CPU_NONCOHERENT_MODE * 4
-.macro __config_lsu
- li t0, LSU_DEFEATURE
- mfcr t1, t0
+#define XLP_AX_WORKAROUND /* enable Ax silicon workarounds */
- lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */
- or t1, t1, t2
- li t2, ~0xe /* S1RCM */
+/* Enable XLP features and workarounds in the LSU */
+.macro xlp_config_lsu
+ li t0, LSU_DEFEATURE
+ mfcr t1, t0
+
+ lui t2, 0x4080 /* Enable Unaligned Access, L2HPE */
+ or t1, t1, t2
+#ifdef XLP_AX_WORKAROUND
+ li t2, ~0xe /* S1RCM */
and t1, t1, t2
- mtcr t1, t0
+#endif
+ mtcr t1, t0
- li t0, SCHED_DEFEATURE
- lui t1, 0x0100 /* Experimental: Disable BRU accepting ALU ops */
- mtcr t1, t0
+#ifdef XLP_AX_WORKAROUND
+ li t0, SCHED_DEFEATURE
+ lui t1, 0x0100 /* Disable BRU accepting ALU ops */
+ mtcr t1, t0
+#endif
+.endm
+
+/*
+ * This is the code that will be copied to the reset entry point for
+ * XLR and XLP. The XLP cores start here when they are woken up. This
+ * is also the NMI entry point.
+ */
+.macro xlp_flush_l1_dcache
+ li t0, LSU_DEBUG_DATA0
+ li t1, LSU_DEBUG_ADDR
+ li t2, 0 /* index */
+ li t3, 0x1000 /* loop count */
+1:
+ sll v0, t2, 5
+ mtcr zero, t0
+ ori v1, v0, 0x3 /* way0 | write_enable | write_active */
+ mtcr v1, t1
+2:
+ mfcr v1, t1
+ andi v1, 0x1 /* wait for write_active == 0 */
+ bnez v1, 2b
+ nop
+ mtcr zero, t0
+ ori v1, v0, 0x7 /* way1 | write_enable | write_active */
+ mtcr v1, t1
+3:
+ mfcr v1, t1
+ andi v1, 0x1 /* wait for write_active == 0 */
+ bnez v1, 3b
+ nop
+ addi t2, 1
+ bne t3, t2, 1b
+ nop
.endm
/*
* The cores can come start when they are woken up. This is also the NMI
* entry, so check that first.
*
- * The data corresponding to reset is stored at RESET_DATA_PHYS location,
- * this will have the thread mask (used when core is woken up) and the
- * current NMI handler in case we reached here for an NMI.
+ * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS
+ * location, this will have the thread mask (used when core is woken up)
+ * and the current NMI handler in case we reached here for an NMI.
*
* When a core or thread is newly woken up, it loops in a 'wait'. When
* the CPU really needs waking up, we send an NMI to it, with the NMI
@@ -89,12 +129,12 @@
FEXPORT(nlm_reset_entry)
dmtc0 k0, $22, 6
dmtc0 k1, $22, 7
- mfc0 k0, CP0_STATUS
- li k1, 0x80000
- and k1, k0, k1
- beqz k1, 1f /* go to real reset entry */
+ mfc0 k0, CP0_STATUS
+ li k1, 0x80000
+ and k1, k0, k1
+ beqz k1, 1f /* go to real reset entry */
nop
- li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
+ li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */
ld k0, BOOT_NMI_HANDLER(k1)
jr k0
nop
@@ -114,21 +154,25 @@ FEXPORT(nlm_reset_entry)
li t2, SYS_CPU_COHERENT_BASE(0)
add t2, t2, t3 /* t2 <- SYS offset for node */
lw t1, 0(t2)
- and t1, t1, t0
- sw t1, 0(t2)
+ and t1, t1, t0
+ sw t1, 0(t2)
/* read back to ensure complete */
- lw t1, 0(t2)
+ lw t1, 0(t2)
sync
/* Configure LSU on Non-0 Cores. */
- __config_lsu
+ xlp_config_lsu
+ /* FALL THROUGH */
/*
* Wake up sibling threads from the initial thread in
* a core.
*/
EXPORT(nlm_boot_siblings)
+ /* core L1D flush before enable threads */
+ xlp_flush_l1_dcache
+ /* Enable hw threads by writing to MAP_THREADMODE of the core */
li t0, CKSEG1ADDR(RESET_DATA_PHYS)
lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */
li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE)
@@ -139,31 +183,28 @@ EXPORT(nlm_boot_siblings)
/*
* The new hardware thread starts at the next instruction
* For all the cases other than core 0 thread 0, we will
- * jump to the secondary wait function.
- */
+ * jump to the secondary wait function.
+ */
mfc0 v0, CP0_EBASE, 1
andi v0, 0x7f /* v0 <- node/core */
-#if 1
- /* A0 errata - Write MMU_SETUP after changing thread mode register. */
+ /* Init MMU in the first thread after changing THREAD_MODE
+ * register (Ax Errata?)
+ */
andi v1, v0, 0x3 /* v1 <- thread id */
bnez v1, 2f
nop
- li t0, MMU_SETUP
- li t1, 0
- mtcr t1, t0
- ehb
-#endif
+ li t0, MMU_SETUP
+ li t1, 0
+ mtcr t1, t0
+ _ehb
-2: beqz v0, 4f
+2: beqz v0, 4f /* boot cpu (cpuid == 0)? */
nop
/* setup status reg */
- mfc0 t1, CP0_STATUS
- li t0, ST0_BEV
- or t1, t0
- xor t1, t0
+ move t1, zero
#ifdef CONFIG_64BIT
ori t1, ST0_KX
#endif
@@ -183,9 +224,9 @@ EXPORT(nlm_boot_siblings)
* For the boot CPU, we have to restore registers and
* return
*/
-4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */
+4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */
li t1, 0xfadebeef
- dmtc0 t1, $4, 2 /* restore SP from UserLocal */
+ dmtc0 t1, $4, 2 /* restore SP from UserLocal */
PTR_SUBU sp, t0, PT_SIZE
RESTORE_ALL
jr ra
@@ -193,7 +234,7 @@ EXPORT(nlm_boot_siblings)
EXPORT(nlm_reset_entry_end)
FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */
- __config_lsu
+ xlp_config_lsu
dmtc0 sp, $4, 2 /* SP saved in UserLocal */
SAVE_ALL
sync
@@ -210,6 +251,12 @@ FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */
__CPUINIT
NESTED(nlm_boot_secondary_cpus, 16, sp)
+ /* Initialize CP0 Status */
+ move t1, zero
+#ifdef CONFIG_64BIT
+ ori t1, ST0_KX
+#endif
+ mtc0 t1, CP0_STATUS
PTR_LA t1, nlm_next_sp
PTR_L sp, 0(t1)
PTR_LA t1, nlm_next_gp
@@ -234,36 +281,36 @@ END(nlm_boot_secondary_cpus)
*/
__CPUINIT
NESTED(nlm_rmiboot_preboot, 16, sp)
- mfc0 t0, $15, 1 # read ebase
- andi t0, 0x1f # t0 has the processor_id()
- andi t2, t0, 0x3 # thread no
- sll t0, 2 # offset in cpu array
+ mfc0 t0, $15, 1 /* read ebase */
+ andi t0, 0x1f /* t0 has the processor_id() */
+ andi t2, t0, 0x3 /* thread num */
+ sll t0, 2 /* offset in cpu array */
- PTR_LA t1, nlm_cpu_ready # mark CPU ready
+ PTR_LA t1, nlm_cpu_ready /* mark CPU ready */
PTR_ADDU t1, t0
li t3, 1
sw t3, 0(t1)
- bnez t2, 1f # skip thread programming
- nop # for non zero hw threads
+ bnez t2, 1f /* skip thread programming */
+ nop /* for thread id != 0 */
/*
- * MMU setup only for first thread in core
+ * XLR MMU setup only for first thread in core
*/
li t0, 0x400
mfcr t1, t0
- li t2, 6 # XLR thread mode mask
+ li t2, 6 /* XLR thread mode mask */
nor t3, t2, zero
- and t2, t1, t2 # t2 - current thread mode
+ and t2, t1, t2 /* t2 - current thread mode */
li v0, CKSEG1ADDR(RESET_DATA_PHYS)
- lw v1, BOOT_THREAD_MODE(v0) # v1 - new thread mode
+ lw v1, BOOT_THREAD_MODE(v0) /* v1 - new thread mode */
sll v1, 1
- beq v1, t2, 1f # same as request value
- nop # nothing to do */
+ beq v1, t2, 1f /* same as request value */
+ nop /* nothing to do */
- and t2, t1, t3 # mask out old thread mode
- or t1, t2, v1 # put in new value
- mtcr t1, t0 # update core control
+ and t2, t1, t3 /* mask out old thread mode */
+ or t1, t2, v1 /* put in new value */
+ mtcr t1, t0 /* update core control */
1: wait
j 1b
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
index 9007ef0c398..6b4b972218f 100644
--- a/arch/mips/netlogic/xlp/Makefile
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -1,3 +1,4 @@
obj-y += setup.o platform.o nlm_hal.o
obj-$(CONFIG_OF) += of.o
obj-$(CONFIG_SMP) += wakeup.o
+obj-$(CONFIG_USB) += usb-init.o
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
index 9428e7125fe..6c65ac70191 100644
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -69,6 +69,32 @@ int nlm_irq_to_irt(int irq)
return PIC_IRT_UART_0_INDEX;
case PIC_UART_1_IRQ:
return PIC_IRT_UART_1_INDEX;
+ case PIC_PCIE_LINK_0_IRQ:
+ return PIC_IRT_PCIE_LINK_0_INDEX;
+ case PIC_PCIE_LINK_1_IRQ:
+ return PIC_IRT_PCIE_LINK_1_INDEX;
+ case PIC_PCIE_LINK_2_IRQ:
+ return PIC_IRT_PCIE_LINK_2_INDEX;
+ case PIC_PCIE_LINK_3_IRQ:
+ return PIC_IRT_PCIE_LINK_3_INDEX;
+ case PIC_EHCI_0_IRQ:
+ return PIC_IRT_EHCI_0_INDEX;
+ case PIC_EHCI_1_IRQ:
+ return PIC_IRT_EHCI_1_INDEX;
+ case PIC_OHCI_0_IRQ:
+ return PIC_IRT_OHCI_0_INDEX;
+ case PIC_OHCI_1_IRQ:
+ return PIC_IRT_OHCI_1_INDEX;
+ case PIC_OHCI_2_IRQ:
+ return PIC_IRT_OHCI_2_INDEX;
+ case PIC_OHCI_3_IRQ:
+ return PIC_IRT_OHCI_3_INDEX;
+ case PIC_MMC_IRQ:
+ return PIC_IRT_MMC_INDEX;
+ case PIC_I2C_0_IRQ:
+ return PIC_IRT_I2C_0_INDEX;
+ case PIC_I2C_1_IRQ:
+ return PIC_IRT_I2C_1_INDEX;
default:
return -1;
}
@@ -81,6 +107,32 @@ int nlm_irt_to_irq(int irt)
return PIC_UART_0_IRQ;
case PIC_IRT_UART_1_INDEX:
return PIC_UART_1_IRQ;
+ case PIC_IRT_PCIE_LINK_0_INDEX:
+ return PIC_PCIE_LINK_0_IRQ;
+ case PIC_IRT_PCIE_LINK_1_INDEX:
+ return PIC_PCIE_LINK_1_IRQ;
+ case PIC_IRT_PCIE_LINK_2_INDEX:
+ return PIC_PCIE_LINK_2_IRQ;
+ case PIC_IRT_PCIE_LINK_3_INDEX:
+ return PIC_PCIE_LINK_3_IRQ;
+ case PIC_IRT_EHCI_0_INDEX:
+ return PIC_EHCI_0_IRQ;
+ case PIC_IRT_EHCI_1_INDEX:
+ return PIC_EHCI_1_IRQ;
+ case PIC_IRT_OHCI_0_INDEX:
+ return PIC_OHCI_0_IRQ;
+ case PIC_IRT_OHCI_1_INDEX:
+ return PIC_OHCI_1_IRQ;
+ case PIC_IRT_OHCI_2_INDEX:
+ return PIC_OHCI_2_IRQ;
+ case PIC_IRT_OHCI_3_INDEX:
+ return PIC_OHCI_3_IRQ;
+ case PIC_IRT_MMC_INDEX:
+ return PIC_MMC_IRQ;
+ case PIC_IRT_I2C_0_INDEX:
+ return PIC_I2C_0_IRQ;
+ case PIC_IRT_I2C_1_INDEX:
+ return PIC_I2C_1_IRQ;
default:
return -1;
}
diff --git a/arch/mips/netlogic/xlp/platform.c b/arch/mips/netlogic/xlp/platform.c
index 1f5e4cba891..2c510d58544 100644
--- a/arch/mips/netlogic/xlp/platform.c
+++ b/arch/mips/netlogic/xlp/platform.c
@@ -53,7 +53,7 @@
static unsigned int nlm_xlp_uart_in(struct uart_port *p, int offset)
{
- return nlm_read_reg(p->iobase, offset);
+ return nlm_read_reg(p->iobase, offset);
}
static void nlm_xlp_uart_out(struct uart_port *p, int offset, int value)
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index b3df7c2aad1..3dec9f28b65 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -41,6 +41,8 @@
#include <asm/bootinfo.h>
#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/common.h>
@@ -109,3 +111,17 @@ void __init prom_init(void)
register_smp_ops(&nlm_smp_ops);
#endif
}
+
+static struct of_device_id __initdata xlp_ids[] = {
+ { .compatible = "simple-bus", },
+ {},
+};
+
+int __init xlp8xx_ds_publish_devices(void)
+{
+ if (!of_have_populated_dt())
+ return 0;
+ return of_platform_bus_probe(NULL, xlp_ids, NULL);
+}
+
+device_initcall(xlp8xx_ds_publish_devices);
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
new file mode 100644
index 00000000000..dbe083a9353
--- /dev/null
+++ b/arch/mips/netlogic/xlp/usb-init.c
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/usb.h>
+
+static void nlm_usb_intr_en(int node, int port)
+{
+ uint32_t val;
+ uint64_t port_addr;
+
+ port_addr = nlm_get_usb_regbase(node, port);
+ val = nlm_read_usb_reg(port_addr, USB_INT_EN);
+ val = USB_CTRL_INTERRUPT_EN | USB_OHCI_INTERRUPT_EN |
+ USB_OHCI_INTERRUPT1_EN | USB_CTRL_INTERRUPT_EN |
+ USB_OHCI_INTERRUPT_EN | USB_OHCI_INTERRUPT2_EN;
+ nlm_write_usb_reg(port_addr, USB_INT_EN, val);
+}
+
+static void nlm_usb_hw_reset(int node, int port)
+{
+ uint64_t port_addr;
+ uint32_t val;
+
+ /* reset USB phy */
+ port_addr = nlm_get_usb_regbase(node, port);
+ val = nlm_read_usb_reg(port_addr, USB_PHY_0);
+ val &= ~(USB_PHY_RESET | USB_PHY_PORT_RESET_0 | USB_PHY_PORT_RESET_1);
+ nlm_write_usb_reg(port_addr, USB_PHY_0, val);
+
+ mdelay(100);
+ val = nlm_read_usb_reg(port_addr, USB_CTL_0);
+ val &= ~(USB_CONTROLLER_RESET);
+ val |= 0x4;
+ nlm_write_usb_reg(port_addr, USB_CTL_0, val);
+}
+
+static int __init nlm_platform_usb_init(void)
+{
+ pr_info("Initializing USB Interface\n");
+ nlm_usb_hw_reset(0, 0);
+ nlm_usb_hw_reset(0, 3);
+
+ /* Enable PHY interrupts */
+ nlm_usb_intr_en(0, 0);
+ nlm_usb_intr_en(0, 3);
+
+ return 0;
+}
+
+arch_initcall(nlm_platform_usb_init);
+
+static u64 xlp_usb_dmamask = ~(u32)0;
+
+/* Fixup the IRQ for USB devices which is exist on XLP SOC PCIE bus */
+static void nlm_usb_fixup_final(struct pci_dev *dev)
+{
+ dev->dev.dma_mask = &xlp_usb_dmamask;
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(64);
+ switch (dev->devfn) {
+ case 0x10:
+ dev->irq = PIC_EHCI_0_IRQ;
+ break;
+ case 0x11:
+ dev->irq = PIC_OHCI_0_IRQ;
+ break;
+ case 0x12:
+ dev->irq = PIC_OHCI_1_IRQ;
+ break;
+ case 0x13:
+ dev->irq = PIC_EHCI_1_IRQ;
+ break;
+ case 0x14:
+ dev->irq = PIC_OHCI_2_IRQ;
+ break;
+ case 0x15:
+ dev->irq = PIC_OHCI_3_IRQ;
+ break;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI,
+ nlm_usb_fixup_final);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_OHCI,
+ nlm_usb_fixup_final);
diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile
index f01e4d7a060..c287dea8757 100644
--- a/arch/mips/netlogic/xlr/Makefile
+++ b/arch/mips/netlogic/xlr/Makefile
@@ -1,2 +1,2 @@
-obj-y += setup.o platform.o
+obj-y += setup.o platform.o platform-flash.o
obj-$(CONFIG_SMP) += wakeup.o
diff --git a/arch/mips/netlogic/xlr/platform-flash.c b/arch/mips/netlogic/xlr/platform-flash.c
new file mode 100644
index 00000000000..340ab1601c4
--- /dev/null
+++ b/arch/mips/netlogic/xlr/platform-flash.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2011, Netlogic Microsystems.
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/resource.h>
+#include <linux/spi/flash.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/flash.h>
+#include <asm/netlogic/xlr/bridge.h>
+#include <asm/netlogic/xlr/gpio.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+/*
+ * Default NOR partition layout
+ */
+static struct mtd_partition xlr_nor_parts[] = {
+ {
+ .name = "User FS",
+ .offset = 0x800000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/*
+ * Default NAND partition layout
+ */
+static struct mtd_partition xlr_nand_parts[] = {
+ {
+ .name = "Root Filesystem",
+ .offset = 64 * 64 * 2048,
+ .size = 432 * 64 * 2048,
+ },
+ {
+ .name = "Home Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+/* Use PHYSMAP flash for NOR */
+struct physmap_flash_data xlr_nor_data = {
+ .width = 2,
+ .parts = xlr_nor_parts,
+ .nr_parts = ARRAY_SIZE(xlr_nor_parts),
+};
+
+static struct resource xlr_nor_res[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device xlr_nor_dev = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &xlr_nor_data,
+ },
+ .num_resources = ARRAY_SIZE(xlr_nor_res),
+ .resource = xlr_nor_res,
+};
+
+const char *xlr_part_probes[] = { "cmdlinepart", NULL };
+
+/*
+ * Use "gen_nand" driver for NAND flash
+ *
+ * There seems to be no way to store a private pointer containing
+ * platform specific info in gen_nand drivier. We will use a global
+ * struct for now, since we currently have only one NAND chip per board.
+ */
+struct xlr_nand_flash_priv {
+ int cs;
+ uint64_t flash_mmio;
+};
+
+static struct xlr_nand_flash_priv nand_priv;
+
+static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ if (ctrl & NAND_CLE)
+ nlm_write_reg(nand_priv.flash_mmio,
+ FLASH_NAND_CLE(nand_priv.cs), cmd);
+ else if (ctrl & NAND_ALE)
+ nlm_write_reg(nand_priv.flash_mmio,
+ FLASH_NAND_ALE(nand_priv.cs), cmd);
+}
+
+struct platform_nand_data xlr_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(xlr_nand_parts),
+ .chip_delay = 50,
+ .partitions = xlr_nand_parts,
+ .part_probe_types = xlr_part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = xlr_nand_ctrl,
+ },
+};
+
+static struct resource xlr_nand_res[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device xlr_nand_dev = {
+ .name = "gen_nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(xlr_nand_res),
+ .resource = xlr_nand_res,
+ .dev = {
+ .platform_data = &xlr_nand_data,
+ }
+};
+
+/*
+ * XLR/XLS supports upto 8 devices on its FLASH interface. The value in
+ * FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the
+ * flash devices.
+ * Under this, each flash device has an offset and size given by the
+ * CSBASE_ADDR and CSBASE_MASK registers for the device.
+ *
+ * The CSBASE_ registers are expected to be setup by the bootloader.
+ */
+static void setup_flash_resource(uint64_t flash_mmio,
+ uint64_t flash_map_base, int cs, struct resource *res)
+{
+ u32 base, mask;
+
+ base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs));
+ mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs));
+
+ res->start = flash_map_base + ((unsigned long)base << 16);
+ res->end = res->start + (mask + 1) * 64 * 1024;
+}
+
+static int __init xlr_flash_init(void)
+{
+ uint64_t gpio_mmio, flash_mmio, flash_map_base;
+ u32 gpio_resetcfg, flash_bar;
+ int cs, boot_nand, boot_nor;
+
+ /* Flash address bits 39:24 is in bridge flash BAR */
+ flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR);
+ flash_map_base = (flash_bar & 0xffff0000) << 8;
+
+ gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+ flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET);
+
+ /* Get the chip reset config */
+ gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG);
+
+ /* Check for boot flash type */
+ boot_nor = boot_nand = 0;
+ if (nlm_chip_is_xls()) {
+ /* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */
+ if (gpio_resetcfg & (1 << 16))
+ boot_nand = 1;
+
+ /* check boot from PCMCIA, (GPIO reset reg bit 15 */
+ if ((gpio_resetcfg & (1 << 15)) == 0)
+ boot_nor = 1; /* not set, booted from NOR */
+ } else { /* XLR */
+ /* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */
+ if ((gpio_resetcfg & (1 << 16)) == 0)
+ boot_nor = 1; /* not set, booted from NOR */
+ }
+
+ /* boot flash at chip select 0 */
+ cs = 0;
+
+ if (boot_nand) {
+ nand_priv.cs = cs;
+ nand_priv.flash_mmio = flash_mmio;
+ setup_flash_resource(flash_mmio, flash_map_base, cs,
+ xlr_nand_res);
+
+ /* Initialize NAND flash at CS 0 */
+ nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs),
+ FLASH_NAND_CSDEV_PARAM);
+ nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs),
+ FLASH_NAND_CSTIME_PARAMA);
+ nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs),
+ FLASH_NAND_CSTIME_PARAMB);
+
+ pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res);
+ return platform_device_register(&xlr_nand_dev);
+ }
+
+ if (boot_nor) {
+ setup_flash_resource(flash_mmio, flash_map_base, cs,
+ xlr_nor_res);
+ pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res);
+ return platform_device_register(&xlr_nor_dev);
+ }
+ return 0;
+}
+
+arch_initcall(xlr_flash_init);
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
index eab64b45dff..71b44d82621 100644
--- a/arch/mips/netlogic/xlr/platform.c
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -14,6 +14,7 @@
#include <linux/resource.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
+#include <linux/i2c.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/xlr/iomap.h>
@@ -97,3 +98,142 @@ static int __init nlm_uart_init(void)
}
arch_initcall(nlm_uart_init);
+
+#ifdef CONFIG_USB
+/* Platform USB devices, only on XLS chips */
+static u64 xls_usb_dmamask = ~(u32)0;
+#define USB_PLATFORM_DEV(n, i, irq) \
+ { \
+ .name = n, \
+ .id = i, \
+ .num_resources = 2, \
+ .dev = { \
+ .dma_mask = &xls_usb_dmamask, \
+ .coherent_dma_mask = 0xffffffff, \
+ }, \
+ .resource = (struct resource[]) { \
+ { \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = irq, \
+ .end = irq, \
+ .flags = IORESOURCE_IRQ, \
+ }, \
+ }, \
+ }
+
+static struct platform_device xls_usb_ehci_device =
+ USB_PLATFORM_DEV("ehci-xls", 0, PIC_USB_IRQ);
+static struct platform_device xls_usb_ohci_device_0 =
+ USB_PLATFORM_DEV("ohci-xls-0", 1, PIC_USB_IRQ);
+static struct platform_device xls_usb_ohci_device_1 =
+ USB_PLATFORM_DEV("ohci-xls-1", 2, PIC_USB_IRQ);
+
+static struct platform_device *xls_platform_devices[] = {
+ &xls_usb_ehci_device,
+ &xls_usb_ohci_device_0,
+ &xls_usb_ohci_device_1,
+};
+
+int xls_platform_usb_init(void)
+{
+ uint64_t usb_mmio, gpio_mmio;
+ unsigned long memres;
+ uint32_t val;
+
+ if (!nlm_chip_is_xls())
+ return 0;
+
+ gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+ usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_1_OFFSET);
+
+ /* Clear Rogue Phy INTs */
+ nlm_write_reg(usb_mmio, 49, 0x10000000);
+ /* Enable all interrupts */
+ nlm_write_reg(usb_mmio, 50, 0x1f000000);
+
+ /* Enable ports */
+ nlm_write_reg(usb_mmio, 1, 0x07000500);
+
+ val = nlm_read_reg(gpio_mmio, 21);
+ if (((val >> 22) & 0x01) == 0) {
+ pr_info("Detected USB Device mode - Not supported!\n");
+ nlm_write_reg(usb_mmio, 0, 0x01000000);
+ return 0;
+ }
+
+ pr_info("Detected USB Host mode - Adding XLS USB devices.\n");
+ /* Clear reset, host mode */
+ nlm_write_reg(usb_mmio, 0, 0x02000000);
+
+ /* Memory resource for various XLS usb ports */
+ usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET);
+ memres = CPHYSADDR((unsigned long)usb_mmio);
+ xls_usb_ehci_device.resource[0].start = memres;
+ xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
+
+ memres += 0x400;
+ xls_usb_ohci_device_0.resource[0].start = memres;
+ xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1;
+
+ memres += 0x400;
+ xls_usb_ohci_device_1.resource[0].start = memres;
+ xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1;
+
+ return platform_add_devices(xls_platform_devices,
+ ARRAY_SIZE(xls_platform_devices));
+}
+
+arch_initcall(xls_platform_usb_init);
+#endif
+
+#ifdef CONFIG_I2C
+static struct i2c_board_info nlm_i2c_board_info1[] __initdata = {
+ /* All XLR boards have this RTC and Max6657 Temp Chip */
+ [0] = {
+ .type = "ds1374",
+ .addr = 0x68
+ },
+ [1] = {
+ .type = "lm90",
+ .addr = 0x4c
+ },
+};
+
+static struct resource i2c_resources[] = {
+ [0] = {
+ .start = 0, /* filled at init */
+ .end = 0,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device nlm_xlr_i2c_1 = {
+ .name = "xlr-i2cbus",
+ .id = 1,
+ .num_resources = 1,
+ .resource = i2c_resources,
+};
+
+static int __init nlm_i2c_init(void)
+{
+ int err = 0;
+ unsigned int offset;
+
+ /* I2C bus 0 does not have any useful devices, configure only bus 1 */
+ offset = NETLOGIC_IO_I2C_1_OFFSET;
+ nlm_xlr_i2c_1.resource[0].start = CPHYSADDR(nlm_mmio_base(offset));
+ nlm_xlr_i2c_1.resource[0].end = nlm_xlr_i2c_1.resource[0].start + 0xfff;
+
+ platform_device_register(&nlm_xlr_i2c_1);
+
+ err = i2c_register_board_info(1, nlm_i2c_board_info1,
+ ARRAY_SIZE(nlm_i2c_board_info1));
+ if (err < 0)
+ pr_err("nlm-i2c: cannot register board I2C devices\n");
+ return err;
+}
+
+arch_initcall(nlm_i2c_init);
+#endif
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index c9d066dedc4..81b1d311834 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -85,7 +85,7 @@ static void nlm_linux_exit(void)
gpiobase = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
/* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */
- nlm_write_reg(gpiobase, NETLOGIC_GPIO_SWRESET_REG, 1);
+ nlm_write_reg(gpiobase, GPIO_SWRESET_REG, 1);
for ( ; ; )
cpu_wait();
}
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index b6e378211a2..f80480a5a03 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -85,6 +85,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
case CPU_34K:
case CPU_1004K:
case CPU_74K:
+ case CPU_LOONGSON1:
case CPU_SB1:
case CPU_SB1A:
case CPU_R10000:
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 4d80a856048..28ea1a4cc57 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -339,12 +339,6 @@ static int __init mipsxx_init(void)
break;
case CPU_1004K:
-#if 0
- /* FIXME: report as 34K for now */
- op_model_mipsxx_ops.cpu_type = "mips/1004K";
- break;
-#endif
-
case CPU_34K:
op_model_mipsxx_ops.cpu_type = "mips/34K";
break;
@@ -374,6 +368,10 @@ static int __init mipsxx_init(void)
op_model_mipsxx_ops.cpu_type = "mips/sb1";
break;
+ case CPU_LOONGSON1:
+ op_model_mipsxx_ops.cpu_type = "mips/loongson1";
+ break;
+
default:
printk(KERN_ERR "Profiling unsupported for this CPU\n");
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c703f43a991..e13a71cbc3c 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o
obj-$(CONFIG_CPU_XLR) += pci-xlr.o
+obj-$(CONFIG_CPU_XLP) += pci-xlp.o
ifdef CONFIG_PCI_MSI
obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c
index 9553b14002d..3e7ce65d776 100644
--- a/arch/mips/pci/fixup-cobalt.c
+++ b/arch/mips/pci/fixup-cobalt.c
@@ -37,7 +37,7 @@
#define VIA_COBALT_BRD_ID_REG 0x94
#define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char)(reg) >> 4)
-static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
+static void __devinit qube_raq_galileo_early_fixup(struct pci_dev *dev)
{
if (dev->devfn == PCI_DEVFN(0, 0) &&
(dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) {
@@ -51,7 +51,7 @@ static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
qube_raq_galileo_early_fixup);
-static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
+static void __devinit qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
{
unsigned short cfgword;
unsigned char lt;
@@ -74,7 +74,7 @@ static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
qube_raq_via_bmIDE_fixup);
-static void qube_raq_galileo_fixup(struct pci_dev *dev)
+static void __devinit qube_raq_galileo_fixup(struct pci_dev *dev)
{
if (dev->devfn != PCI_DEVFN(0, 0))
return;
@@ -129,7 +129,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
int cobalt_board_id;
-static void qube_raq_via_board_id_fixup(struct pci_dev *dev)
+static void __devinit qube_raq_via_board_id_fixup(struct pci_dev *dev)
{
u8 id;
int retval;
diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c
index 70073c98ed3..819622f93e9 100644
--- a/arch/mips/pci/fixup-malta.c
+++ b/arch/mips/pci/fixup-malta.c
@@ -101,3 +101,17 @@ static void __devinit malta_piix_func1_fixup(struct pci_dev *pdev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB,
malta_piix_func1_fixup);
+
+/* Enable PCI 2.1 compatibility in PIIX4 */
+static void __devinit quirk_dlcsetup(struct pci_dev *dev)
+{
+ u8 odlc, ndlc;
+
+ (void) pci_read_config_byte(dev, 0x82, &odlc);
+ /* Enable passive releases and delayed transaction */
+ ndlc = odlc | 7;
+ (void) pci_write_config_byte(dev, 0x82, ndlc);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
+ quirk_dlcsetup);
diff --git a/arch/mips/pci/fixup-rc32434.c b/arch/mips/pci/fixup-rc32434.c
index 3d86823d03a..76bb1be99d4 100644
--- a/arch/mips/pci/fixup-rc32434.c
+++ b/arch/mips/pci/fixup-rc32434.c
@@ -47,7 +47,7 @@ int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
return irq + GROUP4_IRQ_BASE + 4;
}
-static void rc32434_pci_early_fixup(struct pci_dev *dev)
+static void __devinit rc32434_pci_early_fixup(struct pci_dev *dev)
{
if (PCI_SLOT(dev->devfn) == 6 && dev->bus->number == 0) {
/* disable prefetched memory range */
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
index 822ae179bc5..65c7bd10048 100644
--- a/arch/mips/pci/ops-bcm63xx.c
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -411,7 +411,7 @@ struct pci_ops bcm63xx_cb_ops = {
* only one IO window, so it cannot be shared by PCI and cardbus, use
* fixup to choose and detect unhandled configuration
*/
-static void bcm63xx_fixup(struct pci_dev *dev)
+static void __devinit bcm63xx_fixup(struct pci_dev *dev)
{
static int io_window = -1;
int i, found, new_io_window;
@@ -465,3 +465,64 @@ static void bcm63xx_fixup(struct pci_dev *dev)
DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
#endif
+
+static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn)
+{
+ switch (bus->number) {
+ case PCIE_BUS_BRIDGE:
+ return (PCI_SLOT(devfn) == 0);
+ case PCIE_BUS_DEVICE:
+ if (PCI_SLOT(devfn) == 0)
+ return bcm_pcie_readl(PCIE_DLSTATUS_REG)
+ & DLSTATUS_PHYLINKUP;
+ default:
+ return false;
+ }
+}
+
+static int bcm63xx_pcie_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u32 data;
+ u32 reg = where & ~3;
+
+ if (!bcm63xx_pcie_can_access(bus, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (bus->number == PCIE_BUS_DEVICE)
+ reg += PCIE_DEVICE_OFFSET;
+
+ data = bcm_pcie_readl(reg);
+
+ *val = postprocess_read(data, where, size);
+
+ return PCIBIOS_SUCCESSFUL;
+
+}
+
+static int bcm63xx_pcie_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 data;
+ u32 reg = where & ~3;
+
+ if (!bcm63xx_pcie_can_access(bus, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (bus->number == PCIE_BUS_DEVICE)
+ reg += PCIE_DEVICE_OFFSET;
+
+
+ data = bcm_pcie_readl(reg);
+
+ data = preprocess_write(data, val, where, size);
+ bcm_pcie_writel(data, reg);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+
+struct pci_ops bcm63xx_pcie_ops = {
+ .read = bcm63xx_pcie_read,
+ .write = bcm63xx_pcie_write
+};
diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
index 39eb7c417e2..8a48139d219 100644
--- a/arch/mips/pci/pci-bcm63xx.c
+++ b/arch/mips/pci/pci-bcm63xx.c
@@ -10,6 +10,7 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <asm/bootinfo.h>
#include "pci-bcm63xx.h"
@@ -71,6 +72,26 @@ struct pci_controller bcm63xx_cb_controller = {
};
#endif
+static struct resource bcm_pcie_mem_resource = {
+ .name = "bcm63xx PCIe memory space",
+ .start = BCM_PCIE_MEM_BASE_PA,
+ .end = BCM_PCIE_MEM_END_PA,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm_pcie_io_resource = {
+ .name = "bcm63xx PCIe IO space",
+ .start = 0,
+ .end = 0,
+ .flags = 0,
+};
+
+struct pci_controller bcm63xx_pcie_controller = {
+ .pci_ops = &bcm63xx_pcie_ops,
+ .io_resource = &bcm_pcie_io_resource,
+ .mem_resource = &bcm_pcie_mem_resource,
+};
+
static u32 bcm63xx_int_cfg_readl(u32 reg)
{
u32 tmp;
@@ -94,17 +115,99 @@ static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
void __iomem *pci_iospace_start;
-static int __init bcm63xx_pci_init(void)
+static void __init bcm63xx_reset_pcie(void)
{
- unsigned int mem_size;
u32 val;
- if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368())
- return -ENODEV;
+ /* enable clock */
+ val = bcm_perf_readl(PERF_CKCTL_REG);
+ val |= CKCTL_6328_PCIE_EN;
+ bcm_perf_writel(val, PERF_CKCTL_REG);
+
+ /* enable SERDES */
+ val = bcm_misc_readl(MISC_SERDES_CTRL_REG);
+ val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN;
+ bcm_misc_writel(val, MISC_SERDES_CTRL_REG);
+
+ /* reset the PCIe core */
+ val = bcm_perf_readl(PERF_SOFTRESET_6328_REG);
+
+ val &= ~SOFTRESET_6328_PCIE_MASK;
+ val &= ~SOFTRESET_6328_PCIE_CORE_MASK;
+ val &= ~SOFTRESET_6328_PCIE_HARD_MASK;
+ val &= ~SOFTRESET_6328_PCIE_EXT_MASK;
+ bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
+ mdelay(10);
+
+ val |= SOFTRESET_6328_PCIE_MASK;
+ val |= SOFTRESET_6328_PCIE_CORE_MASK;
+ val |= SOFTRESET_6328_PCIE_HARD_MASK;
+ bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
+ mdelay(10);
+
+ val |= SOFTRESET_6328_PCIE_EXT_MASK;
+ bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
+ mdelay(200);
+}
- if (!bcm63xx_pci_enabled)
- return -ENODEV;
+static int __init bcm63xx_register_pcie(void)
+{
+ u32 val;
+ bcm63xx_reset_pcie();
+
+ /* configure the PCIe bridge */
+ val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
+ val |= OPT1_RD_BE_OPT_EN;
+ val |= OPT1_RD_REPLY_BE_FIX_EN;
+ val |= OPT1_PCIE_BRIDGE_HOLE_DET_EN;
+ val |= OPT1_L1_INT_STATUS_MASK_POL;
+ bcm_pcie_writel(val, PCIE_BRIDGE_OPT1_REG);
+
+ /* setup the interrupts */
+ val = bcm_pcie_readl(PCIE_BRIDGE_RC_INT_MASK_REG);
+ val |= PCIE_RC_INT_A | PCIE_RC_INT_B | PCIE_RC_INT_C | PCIE_RC_INT_D;
+ bcm_pcie_writel(val, PCIE_BRIDGE_RC_INT_MASK_REG);
+
+ val = bcm_pcie_readl(PCIE_BRIDGE_OPT2_REG);
+ /* enable credit checking and error checking */
+ val |= OPT2_TX_CREDIT_CHK_EN;
+ val |= OPT2_UBUS_UR_DECODE_DIS;
+
+ /* set device bus/func for the pcie device */
+ val |= (PCIE_BUS_DEVICE << OPT2_CFG_TYPE1_BUS_NO_SHIFT);
+ val |= OPT2_CFG_TYPE1_BD_SEL;
+ bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
+
+ /* setup class code as bridge */
+ val = bcm_pcie_readl(PCIE_IDVAL3_REG);
+ val &= ~IDVAL3_CLASS_CODE_MASK;
+ val |= (PCI_CLASS_BRIDGE_PCI << IDVAL3_SUBCLASS_SHIFT);
+ bcm_pcie_writel(val, PCIE_IDVAL3_REG);
+
+ /* disable bar1 size */
+ val = bcm_pcie_readl(PCIE_CONFIG2_REG);
+ val &= ~CONFIG2_BAR1_SIZE_MASK;
+ bcm_pcie_writel(val, PCIE_CONFIG2_REG);
+
+ /* set bar0 to little endian */
+ val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
+ val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
+ val |= BASEMASK_REMAP_EN;
+ bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
+
+ val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
+ bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
+
+ register_pci_controller(&bcm63xx_pcie_controller);
+
+ return 0;
+}
+
+static int __init bcm63xx_register_pci(void)
+{
+ unsigned int mem_size;
+ u32 val;
/*
* configuration access are done through IO space, remap 4
* first bytes to access it from CPU.
@@ -221,4 +324,22 @@ static int __init bcm63xx_pci_init(void)
return 0;
}
+
+static int __init bcm63xx_pci_init(void)
+{
+ if (!bcm63xx_pci_enabled)
+ return -ENODEV;
+
+ switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ return bcm63xx_register_pcie();
+ case BCM6348_CPU_ID:
+ case BCM6358_CPU_ID:
+ case BCM6368_CPU_ID:
+ return bcm63xx_register_pci();
+ default:
+ return -ENODEV;
+ }
+}
+
arch_initcall(bcm63xx_pci_init);
diff --git a/arch/mips/pci/pci-bcm63xx.h b/arch/mips/pci/pci-bcm63xx.h
index a6e594ef3d6..e6736d558ac 100644
--- a/arch/mips/pci/pci-bcm63xx.h
+++ b/arch/mips/pci/pci-bcm63xx.h
@@ -13,11 +13,16 @@
*/
#define CARDBUS_PCI_IDSEL 0x8
+
+#define PCIE_BUS_BRIDGE 0
+#define PCIE_BUS_DEVICE 1
+
/*
* defined in ops-bcm63xx.c
*/
extern struct pci_ops bcm63xx_pci_ops;
extern struct pci_ops bcm63xx_cb_ops;
+extern struct pci_ops bcm63xx_pcie_ops;
/*
* defined in pci-bcm63xx.c
diff --git a/arch/mips/pci/pci-xlp.c b/arch/mips/pci/pci-xlp.c
new file mode 100644
index 00000000000..140557a2048
--- /dev/null
+++ b/arch/mips/pci/pci-xlp.c
@@ -0,0 +1,248 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/msi.h>
+#include <linux/mm.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/console.h>
+
+#include <asm/io.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/haldefs.h>
+
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pcibus.h>
+#include <asm/netlogic/xlp-hal/bridge.h>
+
+static void *pci_config_base;
+
+#define pci_cfg_addr(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off))
+
+/* PCI ops */
+static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ u32 data;
+ u32 *cfgaddr;
+
+ cfgaddr = (u32 *)(pci_config_base +
+ pci_cfg_addr(bus->number, devfn, where & ~3));
+ data = *cfgaddr;
+ return data;
+}
+
+static inline void pci_cfg_write_32bit(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 data)
+{
+ u32 *cfgaddr;
+
+ cfgaddr = (u32 *)(pci_config_base +
+ pci_cfg_addr(bus->number, devfn, where & ~3));
+ *cfgaddr = data;
+}
+
+static int nlm_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u32 data;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = pci_cfg_read_32bit(bus, devfn, where);
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int nlm_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 data;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = pci_cfg_read_32bit(bus, devfn, where);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ pci_cfg_write_32bit(bus, devfn, where, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops nlm_pci_ops = {
+ .read = nlm_pcibios_read,
+ .write = nlm_pcibios_write
+};
+
+static struct resource nlm_pci_mem_resource = {
+ .name = "XLP PCI MEM",
+ .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */
+ .end = 0xdfffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource nlm_pci_io_resource = {
+ .name = "XLP IO MEM",
+ .start = 0x14000000UL, /* 64MB PCI IO @ 0x1000_0000 */
+ .end = 0x17ffffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller nlm_pci_controller = {
+ .index = 0,
+ .pci_ops = &nlm_pci_ops,
+ .mem_resource = &nlm_pci_mem_resource,
+ .mem_offset = 0x00000000UL,
+ .io_resource = &nlm_pci_io_resource,
+ .io_offset = 0x00000000UL,
+};
+
+static int get_irq_vector(const struct pci_dev *dev)
+{
+ /*
+ * For XLP PCIe, there is an IRQ per Link, find out which
+ * link the device is on to assign interrupts
+ */
+ if (dev->bus->self == NULL)
+ return 0;
+
+ switch (dev->bus->self->devfn) {
+ case 0x8:
+ return PIC_PCIE_LINK_0_IRQ;
+ case 0x9:
+ return PIC_PCIE_LINK_1_IRQ;
+ case 0xa:
+ return PIC_PCIE_LINK_2_IRQ;
+ case 0xb:
+ return PIC_PCIE_LINK_3_IRQ;
+ }
+ WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn);
+ return 0;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return get_irq_vector(dev);
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+static int xlp_enable_pci_bswap(void)
+{
+ uint64_t pciebase, sysbase;
+ int node, i;
+ u32 reg;
+
+ /* Chip-0 so node set to 0 */
+ node = 0;
+ sysbase = nlm_get_bridge_regbase(node);
+ /*
+ * Enable byte swap in hardware. Program each link's PCIe SWAP regions
+ * from the link's address ranges.
+ */
+ for (i = 0; i < 4; i++) {
+ pciebase = nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node, i));
+ if (nlm_read_pci_reg(pciebase, 0) == 0xffffffff)
+ continue;
+
+ reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEMEM_BASE0 + i);
+ nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_MEM_BASE, reg);
+
+ reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEMEM_LIMIT0 + i);
+ nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_MEM_LIM,
+ reg | 0xfff);
+
+ reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEIO_BASE0 + i);
+ nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_IO_BASE, reg);
+
+ reg = nlm_read_bridge_reg(sysbase, BRIDGE_PCIEIO_LIMIT0 + i);
+ nlm_write_pci_reg(pciebase, PCIE_BYTE_SWAP_IO_LIM, reg | 0xfff);
+ }
+ return 0;
+}
+
+static int __init pcibios_init(void)
+{
+ /* Firmware assigns PCI resources */
+ pci_set_flags(PCI_PROBE_ONLY);
+ pci_config_base = ioremap(XLP_DEFAULT_PCI_ECFG_BASE, 64 << 20);
+
+ /* Extend IO port for memory mapped io */
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0;
+
+ xlp_enable_pci_bswap();
+ set_io_port_base(CKSEG1);
+ nlm_pci_controller.io_map_base = CKSEG1;
+
+ register_pci_controller(&nlm_pci_controller);
+ pr_info("XLP PCIe Controller %pR%pR.\n", &nlm_pci_io_resource,
+ &nlm_pci_mem_resource);
+
+ return 0;
+}
+arch_initcall(pcibios_init);
diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 172af1cd586..18af021d289 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -375,7 +375,3 @@ static int __init pcibios_init(void)
}
arch_initcall(pcibios_init);
-
-struct pci_fixup pcibios_fixups[] = {
- {0}
-};
diff --git a/arch/mips/pnx833x/stb22x/board.c b/arch/mips/pnx833x/stb22x/board.c
index 644eb7c3210..4b328ac4305 100644
--- a/arch/mips/pnx833x/stb22x/board.c
+++ b/arch/mips/pnx833x/stb22x/board.c
@@ -91,7 +91,7 @@ void __init pnx833x_board_setup(void)
pnx833x_gpio_select_function_alt(32);
pnx833x_gpio_select_function_alt(33);
-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
/* Setup MIU for NAND access on CS0...
*
* (it seems that we must also configure CS1 for reliable operation,
@@ -117,7 +117,7 @@ void __init pnx833x_board_setup(void)
pnx833x_gpio_select_output(5);
pnx833x_gpio_write(1, 5);
-#elif defined(CONFIG_MTD_CFI) || defined(CONFIG_MTD_CFI_MODULE)
+#elif IS_ENABLED(CONFIG_MTD_CFI)
/* Set up MIU for 16-bit NOR access on CS0 and CS1... */
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 64eb71b1528..bab4953c292 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -304,7 +304,7 @@ static void __devinit quirk_slc90e66_bridge(struct pci_dev *dev)
smsc_fdc37m81x_config_end();
}
-static void quirk_slc90e66_ide(struct pci_dev *dev)
+static void __devinit quirk_slc90e66_ide(struct pci_dev *dev)
{
unsigned char dat;
int regs[2] = {0x41, 0x43};
@@ -339,7 +339,7 @@ static void quirk_slc90e66_ide(struct pci_dev *dev)
}
#endif /* CONFIG_TOSHIBA_FPCIB0 */
-static void tc35815_fixup(struct pci_dev *dev)
+static void __devinit tc35815_fixup(struct pci_dev *dev)
{
/* This device may have PM registers but not they are not suported. */
if (dev->pm_cap) {
@@ -348,7 +348,7 @@ static void tc35815_fixup(struct pci_dev *dev)
}
}
-static void final_fixup(struct pci_dev *dev)
+static void __devinit final_fixup(struct pci_dev *dev)
{
unsigned char bist;
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index ae77a7916c0..560fe899175 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -632,7 +632,7 @@ void __init txx9_physmap_flash_init(int no, unsigned long addr,
unsigned long size,
const struct physmap_flash_data *pdata)
{
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
struct resource res = {
.start = addr,
.end = addr + size - 1,
@@ -670,8 +670,7 @@ void __init txx9_physmap_flash_init(int no, unsigned long addr,
void __init txx9_ndfmc_init(unsigned long baseaddr,
const struct txx9ndfmc_platform_data *pdata)
{
-#if defined(CONFIG_MTD_NAND_TXX9NDFMC) || \
- defined(CONFIG_MTD_NAND_TXX9NDFMC_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_TXX9NDFMC)
struct resource res = {
.start = baseaddr,
.end = baseaddr + 0x1000 - 1,
@@ -687,7 +686,7 @@ void __init txx9_ndfmc_init(unsigned long baseaddr,
#endif
}
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_LEDS_GPIO)
static DEFINE_SPINLOCK(txx9_iocled_lock);
#define TXX9_IOCLED_MAXLEDS 8
@@ -810,7 +809,7 @@ void __init txx9_iocled_init(unsigned long baseaddr,
void __init txx9_dmac_init(int id, unsigned long baseaddr, int irq,
const struct txx9dmac_platform_data *pdata)
{
-#if defined(CONFIG_TXX9_DMAC) || defined(CONFIG_TXX9_DMAC_MODULE)
+#if IS_ENABLED(CONFIG_TXX9_DMAC)
struct resource res[] = {
{
.start = baseaddr,
@@ -866,8 +865,7 @@ void __init txx9_aclc_init(unsigned long baseaddr, int irq,
unsigned int dma_chan_out,
unsigned int dma_chan_in)
{
-#if defined(CONFIG_SND_SOC_TXX9ACLC) || \
- defined(CONFIG_SND_SOC_TXX9ACLC_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_TXX9ACLC)
unsigned int dma_base = dmac_id * TXX9_DMA_MAX_NR_CHANNELS;
struct resource res[] = {
{
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 6567895d1f5..5ff7a9584da 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -317,7 +317,7 @@ void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask)
}
}
-#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
+#if IS_ENABLED(CONFIG_TC35815)
static u32 tx4939_get_eth_speed(struct net_device *dev)
{
struct ethtool_cmd cmd;
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index 2ad8973ba13..e15641d9309 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -40,8 +40,7 @@ static void __init rbtx4939_time_init(void)
tx4939_time_init(0);
}
-#if defined(__BIG_ENDIAN) && \
- (defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE))
+#if defined(__BIG_ENDIAN) && IS_ENABLED(CONFIG_SMC91X)
#define HAVE_RBTX4939_IOSWAB
#define IS_CE1_ADDR(addr) \
((((unsigned long)(addr) - IO_BASE) & 0xfff00000) == TXX9_CE(1))
@@ -187,7 +186,7 @@ static void __init rbtx4939_update_ioc_pen(void)
#define RBTX4939_MAX_7SEGLEDS 8
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if IS_ENABLED(CONFIG_LEDS_CLASS)
static u8 led_val[RBTX4939_MAX_7SEGLEDS];
struct rbtx4939_led_data {
struct led_classdev cdev;
@@ -263,7 +262,7 @@ static inline void rbtx4939_led_setup(void)
static void __rbtx4939_7segled_putc(unsigned int pos, unsigned char val)
{
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#if IS_ENABLED(CONFIG_LEDS_CLASS)
unsigned long flags;
local_irq_save(flags);
/* bit7: reserved for LED class */
@@ -287,7 +286,7 @@ static void rbtx4939_7segled_putc(unsigned int pos, unsigned char val)
__rbtx4939_7segled_putc(pos, val);
}
-#if defined(CONFIG_MTD_RBTX4939) || defined(CONFIG_MTD_RBTX4939_MODULE)
+#if IS_ENABLED(CONFIG_MTD_RBTX4939)
/* special mapping for boot rom */
static unsigned long rbtx4939_flash_fixup_ofs(unsigned long ofs)
{
@@ -463,7 +462,7 @@ static void __init rbtx4939_device_init(void)
.flags = SMC91X_USE_16BIT,
};
struct platform_device *pdev;
-#if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE)
+#if IS_ENABLED(CONFIG_TC35815)
int i, j;
unsigned char ethaddr[2][6];
u8 bdipsw = readb(rbtx4939_bdipsw_addr) & 0x0f;