aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/drivers/pci/pci-sh7780.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/drivers/pci/pci-sh7780.c')
-rw-r--r--arch/sh/drivers/pci/pci-sh7780.c408
1 files changed, 332 insertions, 76 deletions
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 323b92d565f..ffdcbf10b95 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -1,7 +1,7 @@
/*
* Low-Level PCI Support for the SH7780
*
- * Copyright (C) 2005 - 2009 Paul Mundt
+ * Copyright (C) 2005 - 2010 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -11,52 +11,240 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/irq.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/log2.h>
#include "pci-sh4.h"
+#include <asm/mmu.h>
+#include <asm/sizes.h>
-static struct resource sh7785_io_resource = {
- .name = "SH7785_IO",
- .start = SH7780_PCI_IO_BASE,
- .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7785_mem_resource = {
- .name = "SH7785_mem",
- .start = SH7780_PCI_MEMORY_BASE,
- .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
+static struct resource sh7785_pci_resources[] = {
+ {
+ .name = "PCI IO",
+ .start = 0x1000,
+ .end = SZ_4M - 1,
+ .flags = IORESOURCE_IO,
+ }, {
+ .name = "PCI MEM 0",
+ .start = 0xfd000000,
+ .end = 0xfd000000 + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "PCI MEM 1",
+ .start = 0x10000000,
+ .end = 0x10000000 + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /*
+ * 32-bit only resources must be last.
+ */
+ .name = "PCI MEM 2",
+ .start = 0xc0000000,
+ .end = 0xc0000000 + SZ_512M - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ },
};
static struct pci_channel sh7780_pci_controller = {
.pci_ops = &sh4_pci_ops,
- .mem_resource = &sh7785_mem_resource,
- .mem_offset = 0x00000000,
- .io_resource = &sh7785_io_resource,
- .io_offset = 0x00000000,
- .io_map_base = SH7780_PCI_IO_BASE,
+ .resources = sh7785_pci_resources,
+ .nr_resources = ARRAY_SIZE(sh7785_pci_resources),
+ .io_offset = 0,
+ .mem_offset = 0,
+ .io_map_base = 0xfe200000,
+ .serr_irq = evt2irq(0xa00),
+ .err_irq = evt2irq(0xaa0),
};
-static struct sh4_pci_address_map sh7780_pci_map = {
- .window0 = {
-#if defined(CONFIG_32BIT)
- .base = SH7780_32BIT_DDR_BASE_ADDR,
- .size = 0x40000000,
-#else
- .base = SH7780_CS0_BASE_ADDR,
- .size = 0x20000000,
-#endif
- },
+struct pci_errors {
+ unsigned int mask;
+ const char *str;
+} pci_arbiter_errors[] = {
+ { SH4_PCIAINT_MBKN, "master broken" },
+ { SH4_PCIAINT_TBTO, "target bus time out" },
+ { SH4_PCIAINT_MBTO, "master bus time out" },
+ { SH4_PCIAINT_TABT, "target abort" },
+ { SH4_PCIAINT_MABT, "master abort" },
+ { SH4_PCIAINT_RDPE, "read data parity error" },
+ { SH4_PCIAINT_WDPE, "write data parity error" },
+}, pci_interrupt_errors[] = {
+ { SH4_PCIINT_MLCK, "master lock error" },
+ { SH4_PCIINT_TABT, "target-target abort" },
+ { SH4_PCIINT_TRET, "target retry time out" },
+ { SH4_PCIINT_MFDE, "master function disable erorr" },
+ { SH4_PCIINT_PRTY, "address parity error" },
+ { SH4_PCIINT_SERR, "SERR" },
+ { SH4_PCIINT_TWDP, "data parity error for target write" },
+ { SH4_PCIINT_TRDP, "PERR detected for target read" },
+ { SH4_PCIINT_MTABT, "target abort for master" },
+ { SH4_PCIINT_MMABT, "master abort for master" },
+ { SH4_PCIINT_MWPD, "master write data parity error" },
+ { SH4_PCIINT_MRPD, "master read data parity error" },
};
+static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id)
+{
+ struct pci_channel *hose = dev_id;
+ unsigned long addr;
+ unsigned int status;
+ unsigned int cmd;
+ int i;
+
+ addr = __raw_readl(hose->reg_base + SH4_PCIALR);
+
+ /*
+ * Handle status errors.
+ */
+ status = __raw_readw(hose->reg_base + PCI_STATUS);
+ if (status & (PCI_STATUS_PARITY |
+ PCI_STATUS_DETECTED_PARITY |
+ PCI_STATUS_SIG_TARGET_ABORT |
+ PCI_STATUS_REC_TARGET_ABORT |
+ PCI_STATUS_REC_MASTER_ABORT)) {
+ cmd = pcibios_handle_status_errors(addr, status, hose);
+ if (likely(cmd))
+ __raw_writew(cmd, hose->reg_base + PCI_STATUS);
+ }
+
+ /*
+ * Handle arbiter errors.
+ */
+ status = __raw_readl(hose->reg_base + SH4_PCIAINT);
+ for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) {
+ if (status & pci_arbiter_errors[i].mask) {
+ printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
+ pci_arbiter_errors[i].str, addr);
+ cmd |= pci_arbiter_errors[i].mask;
+ }
+ }
+ __raw_writel(cmd, hose->reg_base + SH4_PCIAINT);
+
+ /*
+ * Handle the remaining PCI errors.
+ */
+ status = __raw_readl(hose->reg_base + SH4_PCIINT);
+ for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) {
+ if (status & pci_interrupt_errors[i].mask) {
+ printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
+ pci_interrupt_errors[i].str, addr);
+ cmd |= pci_interrupt_errors[i].mask;
+ }
+ }
+ __raw_writel(cmd, hose->reg_base + SH4_PCIINT);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id)
+{
+ struct pci_channel *hose = dev_id;
+
+ printk(KERN_DEBUG "PCI: system error received: ");
+ pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1);
+ printk("\n");
+
+ /* Deassert SERR */
+ __raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM);
+
+ /* Back off the IRQ for awhile */
+ disable_irq_nosync(irq);
+ hose->serr_timer.expires = jiffies + HZ;
+ add_timer(&hose->serr_timer);
+
+ return IRQ_HANDLED;
+}
+
+static int __init sh7780_pci_setup_irqs(struct pci_channel *hose)
+{
+ int ret;
+
+ /* Clear out PCI arbiter IRQs */
+ __raw_writel(0, hose->reg_base + SH4_PCIAINT);
+
+ /* Clear all error conditions */
+ __raw_writew(PCI_STATUS_DETECTED_PARITY | \
+ PCI_STATUS_SIG_SYSTEM_ERROR | \
+ PCI_STATUS_REC_MASTER_ABORT | \
+ PCI_STATUS_REC_TARGET_ABORT | \
+ PCI_STATUS_SIG_TARGET_ABORT | \
+ PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
+
+ ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED,
+ "PCI SERR interrupt", hose);
+ if (unlikely(ret)) {
+ printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n");
+ return ret;
+ }
+
+ /*
+ * The PCI ERR IRQ needs to be IRQF_SHARED since all of the power
+ * down IRQ vectors are routed through the ERR IRQ vector. We
+ * only request_irq() once as there is only a single masking
+ * source for multiple events.
+ */
+ ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED,
+ "PCI ERR interrupt", hose);
+ if (unlikely(ret)) {
+ free_irq(hose->serr_irq, hose);
+ return ret;
+ }
+
+ /* Unmask all of the arbiter IRQs. */
+ __raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \
+ SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \
+ SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM);
+
+ /* Unmask all of the PCI IRQs */
+ __raw_writel(SH4_PCIINTM_TTADIM | SH4_PCIINTM_TMTOIM | \
+ SH4_PCIINTM_MDEIM | SH4_PCIINTM_APEDIM | \
+ SH4_PCIINTM_SDIM | SH4_PCIINTM_DPEITWM | \
+ SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM | \
+ SH4_PCIINTM_MADIMM | SH4_PCIINTM_MWPDIM | \
+ SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM);
+
+ return ret;
+}
+
+static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose)
+{
+ free_irq(hose->err_irq, hose);
+ free_irq(hose->serr_irq, hose);
+}
+
+static void __init sh7780_pci66_init(struct pci_channel *hose)
+{
+ unsigned int tmp;
+
+ if (!pci_is_66mhz_capable(hose, 0, 0))
+ return;
+
+ /* Enable register access */
+ tmp = __raw_readl(hose->reg_base + SH4_PCICR);
+ tmp |= SH4_PCICR_PREFIX;
+ __raw_writel(tmp, hose->reg_base + SH4_PCICR);
+
+ /* Enable 66MHz operation */
+ tmp = __raw_readw(hose->reg_base + PCI_STATUS);
+ tmp |= PCI_STATUS_66MHZ;
+ __raw_writew(tmp, hose->reg_base + PCI_STATUS);
+
+ /* Done */
+ tmp = __raw_readl(hose->reg_base + SH4_PCICR);
+ tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN;
+ __raw_writel(tmp, hose->reg_base + SH4_PCICR);
+}
+
static int __init sh7780_pci_init(void)
{
struct pci_channel *chan = &sh7780_pci_controller;
+ phys_addr_t memphys;
+ size_t memsize;
unsigned int id;
- const char *type = NULL;
- int ret;
- u32 word;
+ const char *type;
+ int ret, i;
printk(KERN_NOTICE "PCI: Starting intialization.\n");
@@ -65,17 +253,28 @@ static int __init sh7780_pci_init(void)
/* Enable CPU access to the PCIC registers. */
__raw_writel(PCIECR_ENBL, PCIECR);
- id = __raw_readw(chan->reg_base + SH7780_PCIVID);
- if (id != SH7780_VENDOR_ID) {
+ /* Reset */
+ __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST,
+ chan->reg_base + SH4_PCICR);
+
+ /*
+ * Wait for it to come back up. The spec says to allow for up to
+ * 1 second after toggling the reset pin, but in practice 100ms
+ * is more than enough.
+ */
+ mdelay(100);
+
+ id = __raw_readw(chan->reg_base + PCI_VENDOR_ID);
+ if (id != PCI_VENDOR_ID_RENESAS) {
printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
return -ENODEV;
}
- id = __raw_readw(chan->reg_base + SH7780_PCIDID);
- type = (id == SH7763_DEVICE_ID) ? "SH7763" :
- (id == SH7780_DEVICE_ID) ? "SH7780" :
- (id == SH7781_DEVICE_ID) ? "SH7781" :
- (id == SH7785_DEVICE_ID) ? "SH7785" :
+ id = __raw_readw(chan->reg_base + PCI_DEVICE_ID);
+ type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" :
+ (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" :
+ (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" :
+ (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" :
NULL;
if (unlikely(!type)) {
printk(KERN_ERR "PCI: Found an unsupported Renesas host "
@@ -85,62 +284,119 @@ static int __init sh7780_pci_init(void)
printk(KERN_NOTICE "PCI: Found a Renesas %s host "
"controller, revision %d.\n", type,
- __raw_readb(chan->reg_base + SH7780_PCIRID));
+ __raw_readb(chan->reg_base + PCI_REVISION_ID));
- if ((ret = sh4_pci_check_direct(chan)) != 0)
+ /*
+ * Now throw it in to register initialization mode and
+ * start the real work.
+ */
+ __raw_writel(SH4_PCICR_PREFIX, chan->reg_base + SH4_PCICR);
+
+ memphys = __pa(memory_start);
+ memsize = roundup_pow_of_two(memory_end - memory_start);
+
+ /*
+ * If there's more than 512MB of memory, we need to roll over to
+ * LAR1/LSR1.
+ */
+ if (memsize > SZ_512M) {
+ __raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1);
+ __raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1,
+ chan->reg_base + SH4_PCILSR1);
+ memsize = SZ_512M;
+ } else {
+ /*
+ * Otherwise just zero it out and disable it.
+ */
+ __raw_writel(0, chan->reg_base + SH4_PCILAR1);
+ __raw_writel(0, chan->reg_base + SH4_PCILSR1);
+ }
+
+ /*
+ * LAR0/LSR0 covers up to the first 512MB, which is enough to
+ * cover all of lowmem on most platforms.
+ */
+ __raw_writel(memphys, chan->reg_base + SH4_PCILAR0);
+ __raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1,
+ chan->reg_base + SH4_PCILSR0);
+
+ /*
+ * Hook up the ERR and SERR IRQs.
+ */
+ ret = sh7780_pci_setup_irqs(chan);
+ if (unlikely(ret))
return ret;
/*
- * Set the class and sub-class codes.
+ * Disable the cache snoop controller for non-coherent DMA.
*/
- __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
- chan->reg_base + SH7780_PCIBCC);
- __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
- chan->reg_base + SH7780_PCISUB);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSCR0);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSAR0);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSCR1);
+ __raw_writel(0, chan->reg_base + SH7780_PCICSAR1);
/*
- * Set IO and Mem windows to local address
- * Make PCI and local address the same for easy 1 to 1 mapping
+ * Setup the memory BARs
*/
- pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
- /* Set the values on window 0 PCI config registers */
- pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
- pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
+ for (i = 1; i < chan->nr_resources; i++) {
+ struct resource *res = chan->resources + i;
+ resource_size_t size;
- pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
+ if (unlikely(res->flags & IORESOURCE_IO))
+ continue;
- /* Set up standard PCI config registers */
- __raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
- __raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
- __raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
- __raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
+ /*
+ * Make sure we're in the right physical addressing mode
+ * for dealing with the resource.
+ */
+ if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) {
+ chan->nr_resources--;
+ continue;
+ }
- __raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
+ size = resource_size(res);
+
+ /*
+ * The MBMR mask is calculated in units of 256kB, which
+ * keeps things pretty simple.
+ */
+ __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18,
+ chan->reg_base + SH7780_PCIMBMR(i - 1));
+ __raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1));
+ }
- /* Apply any last-minute PCIC fixups */
- pci_fixup_pcic(chan);
+ /*
+ * And I/O.
+ */
+ __raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0);
+ __raw_writel(0, chan->reg_base + SH7780_PCIIOBR);
+ __raw_writel(0, chan->reg_base + SH7780_PCIIOBMR);
- pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
- pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
+ __raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \
+ PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \
+ PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND);
-#ifdef CONFIG_32BIT
- pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
- pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
-#endif
+ /*
+ * Initialization mode complete, release the control register and
+ * enable round robin mode to stop device overruns/starvation.
+ */
+ __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO,
+ chan->reg_base + SH4_PCICR);
- /* Set IOBR for windows containing area specified in pci.h */
- pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
- SH7780_PCIIOBR);
- pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
- SH7780_PCIIOBMR);
+ ret = register_pci_controller(chan);
+ if (unlikely(ret))
+ goto err;
- /* SH7780 init done, set central function init complete */
- /* use round robin mode to stop a device starving/overruning */
- word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
- pci_write_reg(chan, word, SH4_PCICR);
+ sh7780_pci66_init(chan);
- register_pci_controller(chan);
+ printk(KERN_NOTICE "PCI: Running at %dMHz.\n",
+ (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) ?
+ 66 : 33);
return 0;
+
+err:
+ sh7780_pci_teardown_irqs(chan);
+ return ret;
}
arch_initcall(sh7780_pci_init);