aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/apic/apic.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/apic/apic.c')
-rw-r--r--arch/x86/kernel/apic/apic.c150
1 files changed, 74 insertions, 76 deletions
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 0a1c2830ec6..894aa97f071 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -14,7 +14,7 @@
* Mikael Pettersson : PM converted to driver model.
*/
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
#include <linux/kernel_stat.h>
#include <linux/mc146818rtc.h>
#include <linux/acpi_pmtmr.h>
@@ -35,7 +35,8 @@
#include <linux/smp.h>
#include <linux/mm.h>
-#include <asm/perf_counter.h>
+#include <asm/perf_event.h>
+#include <asm/x86_init.h>
#include <asm/pgalloc.h>
#include <asm/atomic.h>
#include <asm/mpspec.h>
@@ -49,6 +50,7 @@
#include <asm/mtrr.h>
#include <asm/smp.h>
#include <asm/mce.h>
+#include <asm/kvm_para.h>
unsigned int num_processors;
@@ -60,7 +62,7 @@ unsigned int boot_cpu_physical_apicid = -1U;
/*
* The highest APIC ID seen during enumeration.
*
- * This determines the messaging protocol we can use: if all APIC IDs
+ * On AMD, this determines the messaging protocol we can use: if all APIC IDs
* are in the 0 ... 7 range, then we can use logical addressing which
* has some performance advantages (better broadcasting).
*
@@ -977,7 +979,7 @@ void lapic_shutdown(void)
{
unsigned long flags;
- if (!cpu_has_apic)
+ if (!cpu_has_apic && !apic_from_smp_config())
return;
local_irq_save(flags);
@@ -1187,7 +1189,7 @@ void __cpuinit setup_local_APIC(void)
apic_write(APIC_ESR, 0);
}
#endif
- perf_counters_lapic_init();
+ perf_events_lapic_init();
preempt_disable();
@@ -1195,8 +1197,7 @@ void __cpuinit setup_local_APIC(void)
* Double-check whether this APIC is really registered.
* This is meaningless in clustered apic mode, so we skip it.
*/
- if (!apic->apic_id_registered())
- BUG();
+ BUG_ON(!apic->apic_id_registered());
/*
* Intel recommends to set DFR, LDR and TPR before enabling
@@ -1361,52 +1362,80 @@ void enable_x2apic(void)
}
#endif /* CONFIG_X86_X2APIC */
-void __init enable_IR_x2apic(void)
+int __init enable_IR(void)
{
#ifdef CONFIG_INTR_REMAP
- int ret;
- unsigned long flags;
- struct IO_APIC_route_entry **ioapic_entries = NULL;
-
- ret = dmar_table_init();
- if (ret) {
- pr_debug("dmar_table_init() failed with %d:\n", ret);
- goto ir_failed;
- }
-
if (!intr_remapping_supported()) {
pr_debug("intr-remapping not supported\n");
- goto ir_failed;
+ return 0;
}
-
if (!x2apic_preenabled && skip_ioapic_setup) {
pr_info("Skipped enabling intr-remap because of skipping "
"io-apic setup\n");
- return;
+ return 0;
}
+ if (enable_intr_remapping(x2apic_supported()))
+ return 0;
+
+ pr_info("Enabled Interrupt-remapping\n");
+
+ return 1;
+
+#endif
+ return 0;
+}
+
+void __init enable_IR_x2apic(void)
+{
+ unsigned long flags;
+ struct IO_APIC_route_entry **ioapic_entries = NULL;
+ int ret, x2apic_enabled = 0;
+ int dmar_table_init_ret = 0;
+
+#ifdef CONFIG_INTR_REMAP
+ dmar_table_init_ret = dmar_table_init();
+ if (dmar_table_init_ret)
+ pr_debug("dmar_table_init() failed with %d:\n",
+ dmar_table_init_ret);
+#endif
+
ioapic_entries = alloc_ioapic_entries();
if (!ioapic_entries) {
- pr_info("Allocate ioapic_entries failed: %d\n", ret);
- goto end;
+ pr_err("Allocate ioapic_entries failed\n");
+ goto out;
}
ret = save_IO_APIC_setup(ioapic_entries);
if (ret) {
pr_info("Saving IO-APIC state failed: %d\n", ret);
- goto end;
+ goto out;
}
local_irq_save(flags);
- mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
+ mask_IO_APIC_setup(ioapic_entries);
- ret = enable_intr_remapping(x2apic_supported());
- if (ret)
- goto end_restore;
+ if (dmar_table_init_ret)
+ ret = 0;
+ else
+ ret = enable_IR();
- pr_info("Enabled Interrupt-remapping\n");
+ if (!ret) {
+ /* IR is required if there is APIC ID > 255 even when running
+ * under KVM
+ */
+ if (max_physical_apicid > 255 || !kvm_para_available())
+ goto nox2apic;
+ /*
+ * without IR all CPUs can be addressed by IOAPIC/MSI
+ * only in physical mode
+ */
+ x2apic_force_phys();
+ }
+
+ x2apic_enabled = 1;
if (x2apic_supported() && !x2apic_mode) {
x2apic_mode = 1;
@@ -1414,41 +1443,25 @@ void __init enable_IR_x2apic(void)
pr_info("Enabled x2apic\n");
}
-end_restore:
- if (ret)
- /*
- * IR enabling failed
- */
+nox2apic:
+ if (!ret) /* IR enabling failed */
restore_IO_APIC_setup(ioapic_entries);
-
unmask_8259A();
local_irq_restore(flags);
-end:
+out:
if (ioapic_entries)
free_ioapic_entries(ioapic_entries);
- if (!ret)
+ if (x2apic_enabled)
return;
-ir_failed:
if (x2apic_preenabled)
- panic("x2apic enabled by bios. But IR enabling failed");
+ panic("x2apic: enabled by BIOS but kernel init failed.");
else if (cpu_has_x2apic)
- pr_info("Not enabling x2apic,Intr-remapping\n");
-#else
- if (!cpu_has_x2apic)
- return;
-
- if (x2apic_preenabled)
- panic("x2apic enabled prior OS handover,"
- " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
-#endif
-
- return;
+ pr_info("Not enabling x2apic, Intr-remapping init failed.\n");
}
-
#ifdef CONFIG_X86_64
/*
* Detect and enable local APICs on non-SMP boards.
@@ -1549,8 +1562,6 @@ no_apic:
#ifdef CONFIG_X86_64
void __init early_init_lapic_mapping(void)
{
- unsigned long phys_addr;
-
/*
* If no local APIC can be found then go out
* : it means there is no mpatable and MADT
@@ -1558,11 +1569,9 @@ void __init early_init_lapic_mapping(void)
if (!smp_found_config)
return;
- phys_addr = mp_lapic_addr;
-
- set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
+ set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
- APIC_BASE, phys_addr);
+ APIC_BASE, mp_lapic_addr);
/*
* Fetch the APIC ID of the BSP in case we have a
@@ -1651,7 +1660,6 @@ int __init APIC_init_uniprocessor(void)
APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
boot_cpu_physical_apicid);
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
return -1;
}
#endif
@@ -1701,7 +1709,7 @@ int __init APIC_init_uniprocessor(void)
localise_nmi_watchdog();
#endif
- setup_boot_clock();
+ x86_init.timers.setup_percpu_clockev();
#ifdef CONFIG_X86_64
check_nmi_watchdog();
#endif
@@ -1908,24 +1916,14 @@ void __cpuinit generic_processor_info(int apicid, int version)
max_physical_apicid = apicid;
#ifdef CONFIG_X86_32
- /*
- * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
- * but we need to work other dependencies like SMP_SUSPEND etc
- * before this can be done without some confusion.
- * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
- * - Ashok Raj <ashok.raj@intel.com>
- */
- if (max_physical_apicid >= 8) {
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- if (!APIC_XAPIC(version)) {
- def_to_bigsmp = 0;
- break;
- }
- /* If P4 and above fall through */
- case X86_VENDOR_AMD:
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_INTEL:
+ if (num_processors > 8)
+ def_to_bigsmp = 1;
+ break;
+ case X86_VENDOR_AMD:
+ if (max_physical_apicid >= 8)
def_to_bigsmp = 1;
- }
}
#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-15 04:13:13 +0000