aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/mmconf-fam10h_64.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/mmconf-fam10h_64.c')
-rw-r--r--arch/x86/kernel/mmconf-fam10h_64.c64
1 files changed, 30 insertions, 34 deletions
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index 6da143c2a6b..ac861b8348e 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -25,7 +25,6 @@ struct pci_hostbridge_probe {
};
static u64 __cpuinitdata fam10h_pci_mmconf_base;
-static int __cpuinitdata fam10h_pci_mmconf_base_status;
static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = {
{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
@@ -44,10 +43,12 @@ static int __cpuinit cmp_range(const void *x1, const void *x2)
return start1 - start2;
}
-/*[47:0] */
-/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */
+#define MMCONF_UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT)
+#define MMCONF_MASK (~(MMCONF_UNIT - 1))
+#define MMCONF_SIZE (MMCONF_UNIT << 8)
+/* need to avoid (0xfd<<32), (0xfe<<32), and (0xff<<32), ht used space */
#define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32)
-#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32)))
+#define BASE_VALID(b) ((b) + MMCONF_SIZE <= (0xfdULL<<32) || (b) >= (1ULL<<40))
static void __cpuinit get_fam10h_pci_mmconf_base(void)
{
int i;
@@ -64,12 +65,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
struct range range[8];
/* only try to get setting from BSP */
- /* -1 or 1 */
- if (fam10h_pci_mmconf_base_status)
+ if (fam10h_pci_mmconf_base)
return;
if (!early_pci_allowed())
- goto fail;
+ return;
found = 0;
for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
@@ -91,7 +91,7 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
}
if (!found)
- goto fail;
+ return;
/* SYS_CFG */
address = MSR_K8_SYSCFG;
@@ -99,16 +99,16 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
/* TOP_MEM2 is not enabled? */
if (!(val & (1<<21))) {
- tom2 = 0;
+ tom2 = 1ULL << 32;
} else {
/* TOP_MEM2 */
address = MSR_K8_TOP_MEM2;
rdmsrl(address, val);
- tom2 = val & (0xffffULL<<32);
+ tom2 = max(val & 0xffffff800000ULL, 1ULL << 32);
}
if (base <= tom2)
- base = tom2 + (1ULL<<32);
+ base = (tom2 + 2 * MMCONF_UNIT - 1) & MMCONF_MASK;
/*
* need to check if the range is in the high mmio range that is
@@ -123,11 +123,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
if (!(reg & 3))
continue;
- start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+ start = (u64)(reg & 0xffffff00) << 8; /* 39:16 on 31:8*/
reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
- end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+ end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/
- if (!end)
+ if (end < tom2)
continue;
range[hi_mmio_num].start = start;
@@ -143,32 +143,27 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
if (range[hi_mmio_num - 1].end < base)
goto out;
- if (range[0].start > base)
+ if (range[0].start > base + MMCONF_SIZE)
goto out;
/* need to find one window */
- base = range[0].start - (1ULL << 32);
+ base = (range[0].start & MMCONF_MASK) - MMCONF_UNIT;
if ((base > tom2) && BASE_VALID(base))
goto out;
- base = range[hi_mmio_num - 1].end + (1ULL << 32);
- if ((base > tom2) && BASE_VALID(base))
+ base = (range[hi_mmio_num - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+ if (BASE_VALID(base))
goto out;
/* need to find window between ranges */
- if (hi_mmio_num > 1)
- for (i = 0; i < hi_mmio_num - 1; i++) {
- if (range[i + 1].start > (range[i].end + (1ULL << 32))) {
- base = range[i].end + (1ULL << 32);
- if ((base > tom2) && BASE_VALID(base))
- goto out;
- }
+ for (i = 1; i < hi_mmio_num; i++) {
+ base = (range[i - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+ val = range[i].start & MMCONF_MASK;
+ if (val >= base + MMCONF_SIZE && BASE_VALID(base))
+ goto out;
}
-
-fail:
- fam10h_pci_mmconf_base_status = -1;
return;
+
out:
fam10h_pci_mmconf_base = base;
- fam10h_pci_mmconf_base_status = 1;
}
void __cpuinit fam10h_check_enable_mmcfg(void)
@@ -190,11 +185,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
/* only trust the one handle 256 buses, if acpi=off */
if (!acpi_pci_disabled || busnbits >= 8) {
- u64 base;
- base = val & (0xffffULL << 32);
- if (fam10h_pci_mmconf_base_status <= 0) {
+ u64 base = val & MMCONF_MASK;
+
+ if (!fam10h_pci_mmconf_base) {
fam10h_pci_mmconf_base = base;
- fam10h_pci_mmconf_base_status = 1;
return;
} else if (fam10h_pci_mmconf_base == base)
return;
@@ -206,8 +200,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
* with 256 buses
*/
get_fam10h_pci_mmconf_base();
- if (fam10h_pci_mmconf_base_status <= 0)
+ if (!fam10h_pci_mmconf_base) {
+ pci_probe &= ~PCI_CHECK_ENABLE_AMD_MMCONF;
return;
+ }
printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n");
val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) |