aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/xen/xen-asm_32.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/xen/xen-asm_32.S')
-rw-r--r--arch/x86/xen/xen-asm_32.S343
1 files changed, 133 insertions, 210 deletions
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
index 42786f59d9c..88e15deb8b8 100644
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -1,117 +1,43 @@
/*
- Asm versions of Xen pv-ops, suitable for either direct use or inlining.
- The inline versions are the same as the direct-use versions, with the
- pre- and post-amble chopped off.
-
- This code is encoded for size rather than absolute efficiency,
- with a view to being able to inline as much as possible.
-
- We only bother with direct forms (ie, vcpu in pda) of the operations
- here; the indirect forms are better handled in C, since they're
- generally too large to inline anyway.
+ * Asm versions of Xen pv-ops, suitable for either direct use or
+ * inlining. The inline versions are the same as the direct-use
+ * versions, with the pre- and post-amble chopped off.
+ *
+ * This code is encoded for size rather than absolute efficiency, with
+ * a view to being able to inline as much as possible.
+ *
+ * We only bother with direct forms (ie, vcpu in pda) of the
+ * operations here; the indirect forms are better handled in C, since
+ * they're generally too large to inline anyway.
*/
-#include <linux/linkage.h>
-
-#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
-#include <asm/percpu.h>
#include <asm/processor-flags.h>
#include <asm/segment.h>
#include <xen/interface/xen.h>
-#define RELOC(x, v) .globl x##_reloc; x##_reloc=v
-#define ENDPATCH(x) .globl x##_end; x##_end=.
-
-/* Pseudo-flag used for virtual NMI, which we don't implement yet */
-#define XEN_EFLAGS_NMI 0x80000000
-
-/*
- Enable events. This clears the event mask and tests the pending
- event status with one and operation. If there are pending
- events, then enter the hypervisor to get them handled.
- */
-ENTRY(xen_irq_enable_direct)
- /* Unmask events */
- movb $0, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
-
- /* Preempt here doesn't matter because that will deal with
- any pending interrupts. The pending check may end up being
- run on the wrong CPU, but that doesn't hurt. */
-
- /* Test for pending */
- testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
- jz 1f
-
-2: call check_events
-1:
-ENDPATCH(xen_irq_enable_direct)
- ret
- ENDPROC(xen_irq_enable_direct)
- RELOC(xen_irq_enable_direct, 2b+1)
-
-
-/*
- Disabling events is simply a matter of making the event mask
- non-zero.
- */
-ENTRY(xen_irq_disable_direct)
- movb $1, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
-ENDPATCH(xen_irq_disable_direct)
- ret
- ENDPROC(xen_irq_disable_direct)
- RELOC(xen_irq_disable_direct, 0)
+#include "xen-asm.h"
/*
- (xen_)save_fl is used to get the current interrupt enable status.
- Callers expect the status to be in X86_EFLAGS_IF, and other bits
- may be set in the return value. We take advantage of this by
- making sure that X86_EFLAGS_IF has the right value (and other bits
- in that byte are 0), but other bits in the return value are
- undefined. We need to toggle the state of the bit, because
- Xen and x86 use opposite senses (mask vs enable).
+ * Force an event check by making a hypercall, but preserve regs
+ * before making the call.
*/
-ENTRY(xen_save_fl_direct)
- testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
- setz %ah
- addb %ah,%ah
-ENDPATCH(xen_save_fl_direct)
- ret
- ENDPROC(xen_save_fl_direct)
- RELOC(xen_save_fl_direct, 0)
-
-
-/*
- In principle the caller should be passing us a value return
- from xen_save_fl_direct, but for robustness sake we test only
- the X86_EFLAGS_IF flag rather than the whole byte. After
- setting the interrupt mask state, it checks for unmasked
- pending events and enters the hypervisor to get them delivered
- if so.
- */
-ENTRY(xen_restore_fl_direct)
- testb $X86_EFLAGS_IF>>8, %ah
- setz PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
- /* Preempt here doesn't matter because that will deal with
- any pending interrupts. The pending check may end up being
- run on the wrong CPU, but that doesn't hurt. */
-
- /* check for unmasked and pending */
- cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
- jz 1f
-2: call check_events
-1:
-ENDPATCH(xen_restore_fl_direct)
+check_events:
+ push %eax
+ push %ecx
+ push %edx
+ call xen_force_evtchn_callback
+ pop %edx
+ pop %ecx
+ pop %eax
ret
- ENDPROC(xen_restore_fl_direct)
- RELOC(xen_restore_fl_direct, 2b+1)
/*
- We can't use sysexit directly, because we're not running in ring0.
- But we can easily fake it up using iret. Assuming xen_sysexit
- is jumped to with a standard stack frame, we can just strip it
- back to a standard iret frame and use iret.
+ * We can't use sysexit directly, because we're not running in ring0.
+ * But we can easily fake it up using iret. Assuming xen_sysexit is
+ * jumped to with a standard stack frame, we can just strip it back to
+ * a standard iret frame and use iret.
*/
ENTRY(xen_sysexit)
movl PT_EAX(%esp), %eax /* Shouldn't be necessary? */
@@ -122,33 +48,31 @@ ENTRY(xen_sysexit)
ENDPROC(xen_sysexit)
/*
- This is run where a normal iret would be run, with the same stack setup:
- 8: eflags
- 4: cs
- esp-> 0: eip
-
- This attempts to make sure that any pending events are dealt
- with on return to usermode, but there is a small window in
- which an event can happen just before entering usermode. If
- the nested interrupt ends up setting one of the TIF_WORK_MASK
- pending work flags, they will not be tested again before
- returning to usermode. This means that a process can end up
- with pending work, which will be unprocessed until the process
- enters and leaves the kernel again, which could be an
- unbounded amount of time. This means that a pending signal or
- reschedule event could be indefinitely delayed.
-
- The fix is to notice a nested interrupt in the critical
- window, and if one occurs, then fold the nested interrupt into
- the current interrupt stack frame, and re-process it
- iteratively rather than recursively. This means that it will
- exit via the normal path, and all pending work will be dealt
- with appropriately.
-
- Because the nested interrupt handler needs to deal with the
- current stack state in whatever form its in, we keep things
- simple by only using a single register which is pushed/popped
- on the stack.
+ * This is run where a normal iret would be run, with the same stack setup:
+ * 8: eflags
+ * 4: cs
+ * esp-> 0: eip
+ *
+ * This attempts to make sure that any pending events are dealt with
+ * on return to usermode, but there is a small window in which an
+ * event can happen just before entering usermode. If the nested
+ * interrupt ends up setting one of the TIF_WORK_MASK pending work
+ * flags, they will not be tested again before returning to
+ * usermode. This means that a process can end up with pending work,
+ * which will be unprocessed until the process enters and leaves the
+ * kernel again, which could be an unbounded amount of time. This
+ * means that a pending signal or reschedule event could be
+ * indefinitely delayed.
+ *
+ * The fix is to notice a nested interrupt in the critical window, and
+ * if one occurs, then fold the nested interrupt into the current
+ * interrupt stack frame, and re-process it iteratively rather than
+ * recursively. This means that it will exit via the normal path, and
+ * all pending work will be dealt with appropriately.
+ *
+ * Because the nested interrupt handler needs to deal with the current
+ * stack state in whatever form its in, we keep things simple by only
+ * using a single register which is pushed/popped on the stack.
*/
ENTRY(xen_iret)
/* test eflags for special cases */
@@ -158,13 +82,15 @@ ENTRY(xen_iret)
push %eax
ESP_OFFSET=4 # bytes pushed onto stack
- /* Store vcpu_info pointer for easy access. Do it this
- way to avoid having to reload %fs */
+ /*
+ * Store vcpu_info pointer for easy access. Do it this way to
+ * avoid having to reload %fs
+ */
#ifdef CONFIG_SMP
GET_THREAD_INFO(%eax)
- movl TI_cpu(%eax),%eax
- movl __per_cpu_offset(,%eax,4),%eax
- mov per_cpu__xen_vcpu(%eax),%eax
+ movl TI_cpu(%eax), %eax
+ movl __per_cpu_offset(,%eax,4), %eax
+ mov per_cpu__xen_vcpu(%eax), %eax
#else
movl per_cpu__xen_vcpu, %eax
#endif
@@ -172,37 +98,46 @@ ENTRY(xen_iret)
/* check IF state we're restoring */
testb $X86_EFLAGS_IF>>8, 8+1+ESP_OFFSET(%esp)
- /* Maybe enable events. Once this happens we could get a
- recursive event, so the critical region starts immediately
- afterwards. However, if that happens we don't end up
- resuming the code, so we don't have to be worried about
- being preempted to another CPU. */
+ /*
+ * Maybe enable events. Once this happens we could get a
+ * recursive event, so the critical region starts immediately
+ * afterwards. However, if that happens we don't end up
+ * resuming the code, so we don't have to be worried about
+ * being preempted to another CPU.
+ */
setz XEN_vcpu_info_mask(%eax)
xen_iret_start_crit:
/* check for unmasked and pending */
cmpw $0x0001, XEN_vcpu_info_pending(%eax)
- /* If there's something pending, mask events again so we
- can jump back into xen_hypervisor_callback */
+ /*
+ * If there's something pending, mask events again so we can
+ * jump back into xen_hypervisor_callback
+ */
sete XEN_vcpu_info_mask(%eax)
popl %eax
- /* From this point on the registers are restored and the stack
- updated, so we don't need to worry about it if we're preempted */
+ /*
+ * From this point on the registers are restored and the stack
+ * updated, so we don't need to worry about it if we're
+ * preempted
+ */
iret_restore_end:
- /* Jump to hypervisor_callback after fixing up the stack.
- Events are masked, so jumping out of the critical
- region is OK. */
+ /*
+ * Jump to hypervisor_callback after fixing up the stack.
+ * Events are masked, so jumping out of the critical region is
+ * OK.
+ */
je xen_hypervisor_callback
1: iret
xen_iret_end_crit:
-.section __ex_table,"a"
+.section __ex_table, "a"
.align 4
- .long 1b,iret_exc
+ .long 1b, iret_exc
.previous
hyper_iret:
@@ -212,55 +147,55 @@ hyper_iret:
.globl xen_iret_start_crit, xen_iret_end_crit
/*
- This is called by xen_hypervisor_callback in entry.S when it sees
- that the EIP at the time of interrupt was between xen_iret_start_crit
- and xen_iret_end_crit. We're passed the EIP in %eax so we can do
- a more refined determination of what to do.
-
- The stack format at this point is:
- ----------------
- ss : (ss/esp may be present if we came from usermode)
- esp :
- eflags } outer exception info
- cs }
- eip }
- ---------------- <- edi (copy dest)
- eax : outer eax if it hasn't been restored
- ----------------
- eflags } nested exception info
- cs } (no ss/esp because we're nested
- eip } from the same ring)
- orig_eax }<- esi (copy src)
- - - - - - - - -
- fs }
- es }
- ds } SAVE_ALL state
- eax }
- : :
- ebx }<- esp
- ----------------
-
- In order to deliver the nested exception properly, we need to shift
- everything from the return addr up to the error code so it
- sits just under the outer exception info. This means that when we
- handle the exception, we do it in the context of the outer exception
- rather than starting a new one.
-
- The only caveat is that if the outer eax hasn't been
- restored yet (ie, it's still on stack), we need to insert
- its value into the SAVE_ALL state before going on, since
- it's usermode state which we eventually need to restore.
+ * This is called by xen_hypervisor_callback in entry.S when it sees
+ * that the EIP at the time of interrupt was between
+ * xen_iret_start_crit and xen_iret_end_crit. We're passed the EIP in
+ * %eax so we can do a more refined determination of what to do.
+ *
+ * The stack format at this point is:
+ * ----------------
+ * ss : (ss/esp may be present if we came from usermode)
+ * esp :
+ * eflags } outer exception info
+ * cs }
+ * eip }
+ * ---------------- <- edi (copy dest)
+ * eax : outer eax if it hasn't been restored
+ * ----------------
+ * eflags } nested exception info
+ * cs } (no ss/esp because we're nested
+ * eip } from the same ring)
+ * orig_eax }<- esi (copy src)
+ * - - - - - - - -
+ * fs }
+ * es }
+ * ds } SAVE_ALL state
+ * eax }
+ * : :
+ * ebx }<- esp
+ * ----------------
+ *
+ * In order to deliver the nested exception properly, we need to shift
+ * everything from the return addr up to the error code so it sits
+ * just under the outer exception info. This means that when we
+ * handle the exception, we do it in the context of the outer
+ * exception rather than starting a new one.
+ *
+ * The only caveat is that if the outer eax hasn't been restored yet
+ * (ie, it's still on stack), we need to insert its value into the
+ * SAVE_ALL state before going on, since it's usermode state which we
+ * eventually need to restore.
*/
ENTRY(xen_iret_crit_fixup)
/*
- Paranoia: Make sure we're really coming from kernel space.
- One could imagine a case where userspace jumps into the
- critical range address, but just before the CPU delivers a GP,
- it decides to deliver an interrupt instead. Unlikely?
- Definitely. Easy to avoid? Yes. The Intel documents
- explicitly say that the reported EIP for a bad jump is the
- jump instruction itself, not the destination, but some virtual
- environments get this wrong.
+ * Paranoia: Make sure we're really coming from kernel space.
+ * One could imagine a case where userspace jumps into the
+ * critical range address, but just before the CPU delivers a
+ * GP, it decides to deliver an interrupt instead. Unlikely?
+ * Definitely. Easy to avoid? Yes. The Intel documents
+ * explicitly say that the reported EIP for a bad jump is the
+ * jump instruction itself, not the destination, but some
+ * virtual environments get this wrong.
*/
movl PT_CS(%esp), %ecx
andl $SEGMENT_RPL_MASK, %ecx
@@ -270,15 +205,17 @@ ENTRY(xen_iret_crit_fixup)
lea PT_ORIG_EAX(%esp), %esi
lea PT_EFLAGS(%esp), %edi
- /* If eip is before iret_restore_end then stack
- hasn't been restored yet. */
+ /*
+ * If eip is before iret_restore_end then stack
+ * hasn't been restored yet.
+ */
cmp $iret_restore_end, %eax
jae 1f
- movl 0+4(%edi),%eax /* copy EAX (just above top of frame) */
+ movl 0+4(%edi), %eax /* copy EAX (just above top of frame) */
movl %eax, PT_EAX(%esp)
- lea ESP_OFFSET(%edi),%edi /* move dest up over saved regs */
+ lea ESP_OFFSET(%edi), %edi /* move dest up over saved regs */
/* set up the copy */
1: std
@@ -286,20 +223,6 @@ ENTRY(xen_iret_crit_fixup)
rep movsl
cld
- lea 4(%edi),%esp /* point esp to new frame */
+ lea 4(%edi), %esp /* point esp to new frame */
2: jmp xen_do_upcall
-
-/*
- Force an event check by making a hypercall,
- but preserve regs before making the call.
- */
-check_events:
- push %eax
- push %ecx
- push %edx
- call xen_force_evtchn_callback
- pop %edx
- pop %ecx
- pop %eax
- ret