aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/xtensa/Kconfig46
-rw-r--r--arch/xtensa/Makefile6
-rw-r--r--arch/xtensa/boot/Makefile12
-rw-r--r--arch/xtensa/boot/dts/Makefile15
-rw-r--r--arch/xtensa/include/asm/atomic.h6
-rw-r--r--arch/xtensa/include/asm/checksum.h1
-rw-r--r--arch/xtensa/include/asm/elf.h3
-rw-r--r--arch/xtensa/include/asm/pgtable.h4
-rw-r--r--arch/xtensa/include/asm/processor.h4
-rw-r--r--arch/xtensa/include/asm/ptrace.h3
-rw-r--r--arch/xtensa/include/asm/regs.h1
-rw-r--r--arch/xtensa/include/asm/string.h4
-rw-r--r--arch/xtensa/include/asm/timex.h8
-rw-r--r--arch/xtensa/include/asm/traps.h24
-rw-r--r--arch/xtensa/include/uapi/asm/signal.h11
-rw-r--r--arch/xtensa/include/uapi/asm/unistd.h7
-rw-r--r--arch/xtensa/kernel/asm-offsets.c1
-rw-r--r--arch/xtensa/kernel/entry.S69
-rw-r--r--arch/xtensa/kernel/head.S9
-rw-r--r--arch/xtensa/kernel/process.c5
-rw-r--r--arch/xtensa/kernel/ptrace.c35
-rw-r--r--arch/xtensa/kernel/setup.c42
-rw-r--r--arch/xtensa/kernel/signal.c6
-rw-r--r--arch/xtensa/kernel/syscall.c41
-rw-r--r--arch/xtensa/kernel/traps.c74
-rw-r--r--arch/xtensa/kernel/vectors.S57
-rw-r--r--arch/xtensa/kernel/vmlinux.lds.S68
-rw-r--r--arch/xtensa/oprofile/Makefile9
-rw-r--r--arch/xtensa/oprofile/backtrace.c171
-rw-r--r--arch/xtensa/oprofile/init.c26
-rw-r--r--arch/xtensa/platforms/iss/Makefile1
-rw-r--r--arch/xtensa/platforms/iss/simdisk.c375
-rw-r--r--arch/xtensa/platforms/xtfpga/setup.c4
-rw-r--r--arch/xtensa/variants/dc233c/include/variant/core.h475
-rw-r--r--arch/xtensa/variants/dc233c/include/variant/tie-asm.h193
-rw-r--r--arch/xtensa/variants/dc233c/include/variant/tie.h150
36 files changed, 1851 insertions, 115 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index cb557be492b..a5c0663c2cd 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -13,9 +13,11 @@ config XTENSA
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
select GENERIC_PCI_IOMAP
+ select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_WANT_OPTIONAL_GPIOLIB
select CLONE_BACKWARDS
select IRQ_DOMAIN
+ select HAVE_OPROFILE
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
primarily for embedded systems. These processors are both
@@ -31,7 +33,7 @@ config GENERIC_HWEIGHT
def_bool y
config GENERIC_GPIO
- def_bool y
+ bool
config ARCH_HAS_ILOG2_U32
def_bool n
@@ -71,6 +73,12 @@ config XTENSA_VARIANT_DC232B
help
This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).
+config XTENSA_VARIANT_DC233C
+ bool "dc233c - Diamond 233L Standard Core Rev.C (LE)"
+ select MMU
+ help
+ This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE).
+
config XTENSA_VARIANT_S6000
bool "s6000 - Stretch software configurable processor"
select VARIANT_IRQ_SWITCH
@@ -197,6 +205,42 @@ config BUILTIN_DTB
string "DTB to build into the kernel image"
depends on OF
+config BLK_DEV_SIMDISK
+ tristate "Host file-based simulated block device support"
+ default n
+ depends on XTENSA_PLATFORM_ISS
+ help
+ Create block devices that map to files in the host file system.
+ Device binding to host file may be changed at runtime via proc
+ interface provided the device is not in use.
+
+config BLK_DEV_SIMDISK_COUNT
+ int "Number of host file-based simulated block devices"
+ range 1 10
+ depends on BLK_DEV_SIMDISK
+ default 2
+ help
+ This is the default minimal number of created block devices.
+ Kernel/module parameter 'simdisk_count' may be used to change this
+ value at runtime. More file names (but no more than 10) may be
+ specified as parameters, simdisk_count grows accordingly.
+
+config SIMDISK0_FILENAME
+ string "Host filename for the first simulated device"
+ depends on BLK_DEV_SIMDISK = y
+ default ""
+ help
+ Attach a first simdisk to a host file. Conventionally, this file
+ contains a root file system.
+
+config SIMDISK1_FILENAME
+ string "Host filename for the second simulated device"
+ depends on BLK_DEV_SIMDISK = y && BLK_DEV_SIMDISK_COUNT != 1
+ default ""
+ help
+ Another simulated disk in a host file for a buildroot-independent
+ storage.
+
source "mm/Kconfig"
source "drivers/pcmcia/Kconfig"
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 0aa72702f17..136224b74d4 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -15,6 +15,7 @@
variant-$(CONFIG_XTENSA_VARIANT_FSF) := fsf
variant-$(CONFIG_XTENSA_VARIANT_DC232B) := dc232b
+variant-$(CONFIG_XTENSA_VARIANT_DC233C) := dc233c
variant-$(CONFIG_XTENSA_VARIANT_S6000) := s6000
variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM) := custom
@@ -86,9 +87,10 @@ core-y += arch/xtensa/kernel/ arch/xtensa/mm/
core-y += $(buildvar) $(buildplf)
libs-y += arch/xtensa/lib/ $(LIBGCC)
+drivers-$(CONFIG_OPROFILE) += arch/xtensa/oprofile/
ifneq ($(CONFIG_BUILTIN_DTB),"")
-core-$(CONFIG_OF) += arch/xtensa/boot/
+core-$(CONFIG_OF) += arch/xtensa/boot/dts/
endif
boot := arch/xtensa/boot
@@ -101,7 +103,7 @@ zImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
%.dtb:
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+ $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
define archhelp
@echo '* zImage - Compressed kernel image (arch/xtensa/boot/images/zImage.*)'
diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile
index 818647e815d..64ffc4b53df 100644
--- a/arch/xtensa/boot/Makefile
+++ b/arch/xtensa/boot/Makefile
@@ -25,18 +25,6 @@ bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf
bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf boot-uboot
bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-redboot boot-elf boot-uboot
-
-BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB)).dtb.o
-ifneq ($(CONFIG_BUILTIN_DTB),"")
-obj-$(CONFIG_OF) += $(BUILTIN_DTB)
-endif
-
-# Rule to build device tree blobs
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call if_changed_dep,dtc)
-
-clean-files := *.dtb.S
-
zImage Image: $(bootdir-y)
$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
diff --git a/arch/xtensa/boot/dts/Makefile b/arch/xtensa/boot/dts/Makefile
new file mode 100644
index 00000000000..5f711bba830
--- /dev/null
+++ b/arch/xtensa/boot/dts/Makefile
@@ -0,0 +1,15 @@
+#
+# arch/xtensa/boot/dts/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB)).dtb.o
+ifneq ($(CONFIG_BUILTIN_DTB),"")
+obj-$(CONFIG_OF) += $(BUILTIN_DTB)
+endif
+
+clean-files := *.dtb.S
diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h
index c3f289174c1..e7fb447bce8 100644
--- a/arch/xtensa/include/asm/atomic.h
+++ b/arch/xtensa/include/asm/atomic.h
@@ -7,7 +7,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2001 - 2008 Tensilica Inc.
*/
#ifndef _XTENSA_ATOMIC_H
@@ -24,11 +24,11 @@
/*
* This Xtensa implementation assumes that the right mechanism
- * for exclusion is for locking interrupts to level 1.
+ * for exclusion is for locking interrupts to level EXCM_LEVEL.
*
* Locking interrupts looks like this:
*
- * rsil a15, 1
+ * rsil a15, LOCKLEVEL
* <code>
* wsr a15, PS
* rsync
diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h
index aed7ad68ca4..0593de689b5 100644
--- a/arch/xtensa/include/asm/checksum.h
+++ b/arch/xtensa/include/asm/checksum.h
@@ -12,6 +12,7 @@
#define _XTENSA_CHECKSUM_H
#include <linux/in6.h>
+#include <asm/uaccess.h>
#include <variant/core.h>
/*
diff --git a/arch/xtensa/include/asm/elf.h b/arch/xtensa/include/asm/elf.h
index 264d5fa450d..eacb25a4171 100644
--- a/arch/xtensa/include/asm/elf.h
+++ b/arch/xtensa/include/asm/elf.h
@@ -84,7 +84,8 @@ typedef struct {
elf_greg_t sar;
elf_greg_t windowstart;
elf_greg_t windowbase;
- elf_greg_t reserved[8+48];
+ elf_greg_t threadptr;
+ elf_greg_t reserved[7+48];
elf_greg_t a[64];
} xtensa_gregset_t;
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index c90ea5bfa1b..d7546c94da5 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -410,6 +410,10 @@ typedef pte_t *pte_addr_t;
#define __HAVE_ARCH_PTEP_SET_WRPROTECT
#define __HAVE_ARCH_PTEP_MKDIRTY
#define __HAVE_ARCH_PTE_SAME
+/* We provide our own get_unmapped_area to cope with
+ * SHM area cache aliasing for userland.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
#include <asm-generic/pgtable.h>
diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h
index e5fb6b0abdf..7e409a5b0ec 100644
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2001 - 2008 Tensilica Inc.
*/
#ifndef _XTENSA_PROCESSOR_H
@@ -68,7 +68,7 @@
/* LOCKLEVEL defines the interrupt level that masks all
* general-purpose interrupts.
*/
-#define LOCKLEVEL 1
+#define LOCKLEVEL XCHAL_EXCM_LEVEL
/* WSBITS and WBBITS are the width of the WINDOWSTART and WINDOWBASE
* registers
diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h
index 682b1deac1f..81f31bc9dde 100644
--- a/arch/xtensa/include/asm/ptrace.h
+++ b/arch/xtensa/include/asm/ptrace.h
@@ -38,6 +38,7 @@ struct pt_regs {
unsigned long syscall; /* 56 */
unsigned long icountlevel; /* 60 */
unsigned long scompare1; /* 64 */
+ unsigned long threadptr; /* 68 */
/* Additional configurable registers that are used by the compiler. */
xtregs_opt_t xtregs_opt;
@@ -48,7 +49,7 @@ struct pt_regs {
/* current register frame.
* Note: The ESF for kernel exceptions ends after 16 registers!
*/
- unsigned long areg[16]; /* 128 (64) */
+ unsigned long areg[16];
};
#include <variant/core.h>
diff --git a/arch/xtensa/include/asm/regs.h b/arch/xtensa/include/asm/regs.h
index 76096a4e5b8..b24de671702 100644
--- a/arch/xtensa/include/asm/regs.h
+++ b/arch/xtensa/include/asm/regs.h
@@ -88,6 +88,7 @@
#define PS_UM_BIT 5
#define PS_EXCM_BIT 4
#define PS_INTLEVEL_SHIFT 0
+#define PS_INTLEVEL_WIDTH 4
#define PS_INTLEVEL_MASK 0x0000000F
/* DBREAKCn register fields. */
diff --git a/arch/xtensa/include/asm/string.h b/arch/xtensa/include/asm/string.h
index 405a8c49ff2..8d5d9dfadb0 100644
--- a/arch/xtensa/include/asm/string.h
+++ b/arch/xtensa/include/asm/string.h
@@ -74,7 +74,7 @@ static inline int strcmp(const char *__cs, const char *__ct)
"beqz %2, 2f\n\t"
"beq %2, %3, 1b\n"
"2:\n\t"
- "sub %2, %3, %2"
+ "sub %2, %2, %3"
: "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy)
: "0" (__cs), "1" (__ct));
@@ -99,7 +99,7 @@ static inline int strncmp(const char *__cs, const char *__ct, size_t __n)
"beqz %3, 2f\n\t"
"beq %2, %3, 1b\n"
"2:\n\t"
- "sub %2, %3, %2"
+ "sub %2, %2, %3"
: "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&r" (__dummy)
: "0" (__cs), "1" (__ct), "r" (__cs+__n));
diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h
index 175b3d5e1b0..9e85ce8bd8d 100644
--- a/arch/xtensa/include/asm/timex.h
+++ b/arch/xtensa/include/asm/timex.h
@@ -5,7 +5,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2001 - 2008 Tensilica Inc.
*/
#ifndef _XTENSA_TIMEX_H
@@ -19,13 +19,13 @@
#define _INTLEVEL(x) XCHAL_INT ## x ## _LEVEL
#define INTLEVEL(x) _INTLEVEL(x)
-#if INTLEVEL(XCHAL_TIMER0_INTERRUPT) == 1
+#if INTLEVEL(XCHAL_TIMER0_INTERRUPT) <= XCHAL_EXCM_LEVEL
# define LINUX_TIMER 0
# define LINUX_TIMER_INT XCHAL_TIMER0_INTERRUPT
-#elif INTLEVEL(XCHAL_TIMER1_INTERRUPT) == 1
+#elif INTLEVEL(XCHAL_TIMER1_INTERRUPT) <= XCHAL_EXCM_LEVEL
# define LINUX_TIMER 1
# define LINUX_TIMER_INT XCHAL_TIMER1_INTERRUPT
-#elif INTLEVEL(XCHAL_TIMER2_INTERRUPT) == 1
+#elif INTLEVEL(XCHAL_TIMER2_INTERRUPT) <= XCHAL_EXCM_LEVEL
# define LINUX_TIMER 2
# define LINUX_TIMER_INT XCHAL_TIMER2_INTERRUPT
#else
diff --git a/arch/xtensa/include/asm/traps.h b/arch/xtensa/include/asm/traps.h
index 54f70440185..b5464ef3cf6 100644
--- a/arch/xtensa/include/asm/traps.h
+++ b/arch/xtensa/include/asm/traps.h
@@ -20,4 +20,28 @@
extern void * __init trap_set_handler(int cause, void *handler);
extern void do_unhandled(struct pt_regs *regs, unsigned long exccause);
+static inline void spill_registers(void)
+{
+ unsigned int a0, ps;
+
+ __asm__ __volatile__ (
+ "movi a14, " __stringify(PS_EXCM_BIT | LOCKLEVEL) "\n\t"
+ "mov a12, a0\n\t"
+ "rsr a13, sar\n\t"
+ "xsr a14, ps\n\t"
+ "movi a0, _spill_registers\n\t"
+ "rsync\n\t"
+ "callx0 a0\n\t"
+ "mov a0, a12\n\t"
+ "wsr a13, sar\n\t"
+ "wsr a14, ps\n\t"
+ : : "a" (&a0), "a" (&ps)
+#if defined(CONFIG_FRAME_POINTER)
+ : "a2", "a3", "a4", "a11", "a12", "a13", "a14", "a15",
+#else
+ : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15",
+#endif
+ "memory");
+}
+
#endif /* _XTENSA_TRAPS_H */
diff --git a/arch/xtensa/include/uapi/asm/signal.h b/arch/xtensa/include/uapi/asm/signal.h
index dacf716dd3e..586756ee267 100644
--- a/arch/xtensa/include/uapi/asm/signal.h
+++ b/arch/xtensa/include/uapi/asm/signal.h
@@ -102,16 +102,7 @@ typedef struct {
#ifndef __ASSEMBLY__
-#define SIG_BLOCK 0 /* for blocking signals */
-#define SIG_UNBLOCK 1 /* for unblocking signals */
-#define SIG_SETMASK 2 /* for setting the signal mask */
-
-/* Type of a signal handler. */
-typedef void (*__sighandler_t)(int);
-
-#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
-#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
-#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
+#include <asm-generic/signal-defs.h>
#ifndef __KERNEL__
diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h
index 19fac3f543a..51940fec699 100644
--- a/arch/xtensa/include/uapi/asm/unistd.h
+++ b/arch/xtensa/include/uapi/asm/unistd.h
@@ -728,8 +728,13 @@ __SYSCALL(330, sys_prlimit64, 4)
#define __NR_kcmp 331
__SYSCALL(331, sys_kcmp, 5)
+#define __NR_finit_module 332
+__SYSCALL(332, sys_finit_module, 3)
-#define __NR_syscall_count 332
+#define __NR_accept4 333
+__SYSCALL(333, sys_accept4, 4)
+
+#define __NR_syscall_count 334
/*
* sysxtensa syscall handler
diff --git a/arch/xtensa/kernel/asm-offsets.c b/arch/xtensa/kernel/asm-offsets.c
index 0701fad170d..1915c7c889b 100644
--- a/arch/xtensa/kernel/asm-offsets.c
+++ b/arch/xtensa/kernel/asm-offsets.c
@@ -42,6 +42,7 @@ int main(void)
DEFINE(PT_ICOUNTLEVEL, offsetof (struct pt_regs, icountlevel));
DEFINE(PT_SYSCALL, offsetof (struct pt_regs, syscall));
DEFINE(PT_SCOMPARE1, offsetof(struct pt_regs, scompare1));
+ DEFINE(PT_THREADPTR, offsetof(struct pt_regs, threadptr));
DEFINE(PT_AREG, offsetof (struct pt_regs, areg[0]));
DEFINE(PT_AREG0, offsetof (struct pt_regs, areg[0]));
DEFINE(PT_AREG1, offsetof (struct pt_regs, areg[1]));
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 3777fec85e7..63845f95079 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -7,7 +7,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2004-2007 by Tensilica Inc.
+ * Copyright (C) 2004 - 2008 by Tensilica Inc.
*
* Chris Zankel <chris@zankel.net>
*
@@ -130,6 +130,11 @@ _user_exception:
s32i a3, a1, PT_SAR
s32i a2, a1, PT_ICOUNTLEVEL
+#if XCHAL_HAVE_THREADPTR
+ rur a2, threadptr
+ s32i a2, a1, PT_THREADPTR
+#endif
+
/* Rotate ws so that the current windowbase is at bit0. */
/* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
@@ -349,15 +354,16 @@ common_exception:
* so we can allow exceptions and interrupts (*) again.
* Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X)
*
- * (*) We only allow interrupts if PS.INTLEVEL was not set to 1 before
- * (interrupts disabled) and if this exception is not an interrupt.
+ * (*) We only allow interrupts of higher priority than current IRQ
*/
rsr a3, ps
addi a0, a0, -4
movi a2, 1
- extui a3, a3, 0, 1 # a3 = PS.INTLEVEL[0]
- moveqz a3, a2, a0 # a3 = 1 iff interrupt exception
+ extui a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
+ # a3 = PS.INTLEVEL
+ movnez a2, a3, a3 # a2 = 1: level-1, > 1: high priority
+ moveqz a3, a2, a0 # a3 = IRQ level iff interrupt
movi a2, 1 << PS_WOE_BIT
or a3, a3, a2
rsr a0, exccause
@@ -398,7 +404,7 @@ common_exception:
callx4 a4
/* Jump here for exception exit */
-
+ .global common_exception_return
common_exception_return:
/* Jump if we are returning from kernel exceptions. */
@@ -509,6 +515,11 @@ user_exception_exit:
* (if we have restored WSBITS-1 frames).
*/
+#if XCHAL_HAVE_THREADPTR
+ l32i a3, a1, PT_THREADPTR
+ wur a3, threadptr
+#endif
+
2: j common_exception_exit
/* This is the kernel exception exit.
@@ -641,19 +652,51 @@ common_exception_exit:
l32i a0, a1, PT_DEPC
l32i a3, a1, PT_AREG3
+ _bltui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+
+ wsr a0, depc
l32i a2, a1, PT_AREG2
- _bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+ l32i a0, a1, PT_AREG0
+ l32i a1, a1, PT_AREG1
+ rfde
+1:
/* Restore a0...a3 and return */
+ rsr a0, ps
+ extui a2, a0, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
+ movi a0, 2f
+ slli a2, a2, 4
+ add a0, a2, a0
+ l32i a2, a1, PT_AREG2
+ jx a0
+
+ .macro irq_exit_level level
+ .align 16
+ .if XCHAL_EXCM_LEVEL >= \level
+ l32i a0, a1, PT_PC
+ wsr a0, epc\level
l32i a0, a1, PT_AREG0
l32i a1, a1, PT_AREG1
- rfe
+ rfi \level
+ .endif
+ .endm
-1: wsr a0, depc
+ .align 16
+2:
l32i a0, a1, PT_AREG0
l32i a1, a1, PT_AREG1
- rfde
+ rfe
+
+ .align 16
+ /* no rfi for level-1 irq, handled by rfe above*/
+ nop
+
+ irq_exit_level 2
+ irq_exit_level 3
+ irq_exit_level 4
+ irq_exit_level 5
+ irq_exit_level 6
ENDPROC(kernel_exception)
@@ -753,7 +796,7 @@ ENTRY(unrecoverable_exception)
wsr a1, windowbase
rsync
- movi a1, (1 << PS_WOE_BIT) | 1
+ movi a1, (1 << PS_WOE_BIT) | LOCKLEVEL
wsr a1, ps
rsync
@@ -1474,7 +1517,7 @@ ENTRY(_spill_registers)
l32i a1, a3, EXC_TABLE_KSTK
wsr a3, excsave1
- movi a4, (1 << PS_WOE_BIT) | 1
+ movi a4, (1 << PS_WOE_BIT) | LOCKLEVEL
wsr a4, ps
rsync
@@ -1922,7 +1965,7 @@ ENTRY(_switch_to)
s32i a6, a3, EXC_TABLE_FIXUP
s32i a7, a3, EXC_TABLE_KSTK
- /* restore context of the task that 'next' addresses */
+ /* restore context of the task 'next' */
l32i a0, a13, THREAD_RA # restore return address
l32i a1, a13, THREAD_SP # restore stack pointer
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index 91d9095284d..df88f98737f 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -7,7 +7,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2001 - 2008 Tensilica Inc.
*
* Chris Zankel <chris@zankel.net>
* Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
@@ -128,14 +128,14 @@ ENTRY(_startup)
wsr a0, cpenable
#endif
- /* Set PS.INTLEVEL=1, PS.WOE=0, kernel stack, PS.EXCM=0
+ /* Set PS.INTLEVEL=LOCKLEVEL, PS.WOE=0, kernel stack, PS.EXCM=0
*
* Note: PS.EXCM must be cleared before using any loop
* instructions; otherwise, they are silently disabled, and
* at most one iteration of the loop is executed.
*/
- movi a1, 1
+ movi a1, LOCKLEVEL
wsr a1, ps
rsync
@@ -211,7 +211,8 @@ ENTRY(_startup)
movi a1, init_thread_union
addi a1, a1, KERNEL_STACK_SIZE
- movi a2, 0x00040001 # WOE=1, INTLEVEL=1, UM=0
+ movi a2, (1 << PS_WOE_BIT) | LOCKLEVEL
+ # WOE=1, INTLEVEL=LOCKLEVEL, UM=0
wsr a2, ps # (enable reg-windows; progmode stack)
rsync
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index 0dd5784416d..5cd82e9f601 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -259,9 +259,10 @@ int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn,
memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4],
&regs->areg[XCHAL_NUM_AREGS - len/4], len);
}
-// FIXME: we need to set THREADPTR in thread_info...
+
+ /* The thread pointer is passed in the '4th argument' (= a5) */
if (clone_flags & CLONE_SETTLS)
- childregs->areg[2] = childregs->areg[6];
+ childregs->threadptr = childregs->areg[5];
} else {
p->thread.ra = MAKE_RA_FOR_CALL(
(unsigned long)ret_from_kernel_thread, 1);
diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c
index 61fb2e9e903..562fac66475 100644
--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -53,9 +53,8 @@ int ptrace_getregs(struct task_struct *child, void __user *uregs)
{
struct pt_regs *regs = task_pt_regs(child);
xtensa_gregset_t __user *gregset = uregs;
- unsigned long wm = regs->wmask;
unsigned long wb = regs->windowbase;
- int live, i;
+ int i;
if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t)))
return -EIO;
@@ -67,13 +66,11 @@ int ptrace_getregs(struct task_struct *child, void __user *uregs)
__put_user(regs->lcount, &gregset->lcount);
__put_user(regs->windowstart, &gregset->windowstart);
__put_user(regs->windowbase, &gregset->windowbase);
+ __put_user(regs->threadptr, &gregset->threadptr);
- live = (wm & 2) ? 4 : (wm & 4) ? 8 : (wm & 8) ? 12 : 16;
-
- for (i = 0; i < live; i++)
- __put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS));
- for (i = XCHAL_NUM_AREGS - (wm >> 4) * 4; i < XCHAL_NUM_AREGS; i++)
- __put_user(regs->areg[i],gregset->a+((wb*4+i)%XCHAL_NUM_AREGS));
+ for (i = 0; i < XCHAL_NUM_AREGS; i++)
+ __put_user(regs->areg[i],
+ gregset->a + ((wb * 4 + i) % XCHAL_NUM_AREGS));
return 0;
}
@@ -84,7 +81,7 @@ int ptrace_setregs(struct task_struct *child, void __user *uregs)
xtensa_gregset_t *gregset = uregs;
const unsigned long ps_mask = PS_CALLINC_MASK | PS_OWB_MASK;
unsigned long ps;
- unsigned long wb;
+ unsigned long wb, ws;
if (!access_ok(VERIFY_WRITE, uregs, sizeof(xtensa_gregset_t)))
return -EIO;
@@ -94,21 +91,33 @@ int ptrace_setregs(struct task_struct *child, void __user *uregs)
__get_user(regs->lbeg, &gregset->lbeg);
__get_user(regs->lend, &gregset->lend);
__get_user(regs->lcount, &gregset->lcount);
- __get_user(regs->windowstart, &gregset->windowstart);
+ __get_user(ws, &gregset->windowstart);
__get_user(wb, &gregset->windowbase);
+ __get_user(regs->threadptr, &gregset->threadptr);
regs->ps = (regs->ps & ~ps_mask) | (ps & ps_mask) | (1 << PS_EXCM_BIT);
if (wb >= XCHAL_NUM_AREGS / 4)
return -EFAULT;
- regs->windowbase = wb;
+ if (wb != regs->windowbase || ws != regs->windowstart) {
+ unsigned long rotws, wmask;
+
+ rotws = (((ws | (ws << WSBITS)) >> wb) &
+ ((1 << WSBITS) - 1)) & ~1;
+ wmask = ((rotws ? WSBITS + 1 - ffs(rotws) : 0) << 4) |
+ (rotws & 0xF) | 1;
+ regs->windowbase = wb;
+ regs->windowstart = ws;
+ regs->wmask = wmask;
+ }
if (wb != 0 && __copy_from_user(regs->areg + XCHAL_NUM_AREGS - wb * 4,
- gregset->a, wb * 16))
+ gregset->a, wb * 16))
return -EFAULT;
- if (__copy_from_user(regs->areg, gregset->a + wb*4, (WSBITS-wb) * 16))
+ if (__copy_from_user(regs->areg, gregset->a + wb * 4,
+ (WSBITS - wb) * 16))
return -EFAULT;
return 0;
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 24c1a57abb4..6dd25ecde3f 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -328,6 +328,27 @@ extern char _UserExceptionVector_literal_start;
extern char _UserExceptionVector_text_end;
extern char _DoubleExceptionVector_literal_start;
extern char _DoubleExceptionVector_text_end;
+#if XCHAL_EXCM_LEVEL >= 2
+extern char _Level2InterruptVector_text_start;
+extern char _Level2InterruptVector_text_end;
+#endif
+#if XCHAL_EXCM_LEVEL >= 3
+extern char _Level3InterruptVector_text_start;
+extern char _Level3InterruptVector_text_end;
+#endif
+#if XCHAL_EXCM_LEVEL >= 4
+extern char _Level4InterruptVector_text_start;
+extern char _Level4InterruptVector_text_end;
+#endif
+#if XCHAL_EXCM_LEVEL >= 5
+extern char _Level5InterruptVector_text_start;
+extern char _Level5InterruptVector_text_end;
+#endif
+#if XCHAL_EXCM_LEVEL >= 6
+extern char _Level6InterruptVector_text_start;
+extern char _Level6InterruptVector_text_end;
+#endif
+
#ifdef CONFIG_S32C1I_SELFTEST
@@ -482,6 +503,27 @@ void __init setup_arch(char **cmdline_p)
mem_reserve(__pa(&_DoubleExceptionVector_literal_start),
__pa(&_DoubleExceptionVector_text_end), 0);
+#if XCHAL_EXCM_LEVEL >= 2
+ mem_reserve(__pa(&_Level2InterruptVector_text_start),
+ __pa(&_Level2InterruptVector_text_end), 0);
+#endif
+#if XCHAL_EXCM_LEVEL >= 3
+ mem_reserve(__pa(&_Level3InterruptVector_text_start),
+ __pa(&_Level3InterruptVector_text_end), 0);
+#endif
+#if XCHAL_EXCM_LEVEL >= 4
+ mem_reserve(__pa(&_Level4InterruptVector_text_start),
+ __pa(&_Level4InterruptVector_text_end), 0);
+#endif
+#if XCHAL_EXCM_LEVEL >= 5
+ mem_reserve(__pa(&_Level5InterruptVector_text_start),
+ __pa(&_Level5InterruptVector_text_end), 0);
+#endif
+#if XCHAL_EXCM_LEVEL >= 6
+ mem_reserve(__pa(&_Level6InterruptVector_text_start),
+ __pa(&_Level6InterruptVector_text_end), 0);
+#endif
+
bootmem_init();
#ifdef CONFIG_OF
diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c
index d7590dddd08..718eca1850b 100644
--- a/arch/xtensa/kernel/signal.c
+++ b/arch/xtensa/kernel/signal.c
@@ -337,7 +337,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
struct rt_sigframe *frame;
int err = 0;
int signal;
- unsigned long sp, ra;
+ unsigned long sp, ra, tp;
sp = regs->areg[1];
@@ -391,7 +391,8 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
* Return context not modified until this point.
*/
- /* Set up registers for signal handler */
+ /* Set up registers for signal handler; preserve the threadptr */
+ tp = regs->threadptr;
start_thread(regs, (unsigned long) ka->sa.sa_handler,
(unsigned long) frame);
@@ -402,6 +403,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
regs->areg[6] = (unsigned long) signal;
regs->areg[7] = (unsigned long) &frame->info;
regs->areg[8] = (unsigned long) &frame->uc;
+ regs->threadptr = tp;
/* Set access mode to USER_DS. Nomenclature is outdated, but
* functionality is used in uaccess.h
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
index 54fa8425cee..5d3f7a119ed 100644
--- a/arch/xtensa/kernel/syscall.c
+++ b/arch/xtensa/kernel/syscall.c
@@ -36,6 +36,10 @@ syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= {
#include <uapi/asm/unistd.h>
};
+#define COLOUR_ALIGN(addr, pgoff) \
+ ((((addr) + SHMLBA - 1) & ~(SHMLBA - 1)) + \
+ (((pgoff) << PAGE_SHIFT) & (SHMLBA - 1)))
+
asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg)
{
unsigned long ret;
@@ -52,3 +56,40 @@ asmlinkage long xtensa_fadvise64_64(int fd, int advice,
{
return sys_fadvise64_64(fd, offset, len, advice);
}
+
+unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct vm_area_struct *vmm;
+
+ if (flags & MAP_FIXED) {
+ /* We do not accept a shared mapping if it would violate
+ * cache aliasing constraints.
+ */
+ if ((flags & MAP_SHARED) &&
+ ((addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)))
+ return -EINVAL;
+ return addr;
+ }
+
+ if (len > TASK_SIZE)
+ return -ENOMEM;
+ if (!addr)
+ addr = TASK_UNMAPPED_BASE;
+
+ if (flags & MAP_SHARED)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ else
+ addr = PAGE_ALIGN(addr);
+
+ for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) {
+ /* At this point: (!vmm || addr < vmm->vm_end). */
+ if (TASK_SIZE - len < addr)
+ return -ENOMEM;
+ if (!vmm || addr + len <= vmm->vm_start)
+ return addr;
+ addr = vmm->vm_end;
+ if (flags & MAP_SHARED)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ }
+}
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index ded955d4515..923db5c1527 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -37,6 +37,7 @@
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
+#include <asm/traps.h>
#ifdef CONFIG_KGDB
extern int gdb_enter;
@@ -193,28 +194,49 @@ void do_multihit(struct pt_regs *regs, unsigned long exccause)
}
/*
- * Level-1 interrupt.
- * We currently have no priority encoding.
+ * IRQ handler.
+ * PS.INTLEVEL is the current IRQ priority level.
*/
-unsigned long ignored_level1_interrupts;
extern void do_IRQ(int, struct pt_regs *);
-void do_interrupt (struct pt_regs *regs)
+void do_interrupt(struct pt_regs *regs)
{
- unsigned long intread = get_sr (interrupt);
- unsigned long intenable = get_sr (intenable);
- int i, mask;
-
- /* Handle all interrupts (no priorities).
- * (Clear the interrupt before processing, in case it's
- * edge-triggered or software-generated)
- */
+ static const unsigned int_level_mask[] = {
+ 0,
+ XCHAL_INTLEVEL1_MASK,
+ XCHAL_INTLEVEL2_MASK,
+ XCHAL_INTLEVEL3_MASK,
+ XCHAL_INTLEVEL4_MASK,
+ XCHAL_INTLEVEL5_MASK,
+ XCHAL_INTLEVEL6_MASK,
+ XCHAL_INTLEVEL7_MASK,
+ };
+ unsigned level = get_sr(ps) & PS_INTLEVEL_MASK;
+
+ if (WARN_ON_ONCE(level >= ARRAY_SIZE(int_level_mask)))
+ return;
- for (i=0, mask = 1; i < XCHAL_NUM_INTERRUPTS; i++, mask <<= 1) {
- if (mask & (intread & intenable)) {
- set_sr (mask, intclear);
- do_IRQ (i,regs);
+ for (;;) {
+ unsigned intread = get_sr(interrupt);
+ unsigned intenable = get_sr(intenable);
+ unsigned int_at_level = intread & intenable &
+ int_level_mask[level];
+
+ if (!int_at_level)
+ return;
+
+ /*
+ * Clear the interrupt before processing, in case it's
+ * edge-triggered or software-generated
+ */
+ while (int_at_level) {
+ unsigned i = __ffs(int_at_level);
+ unsigned mask = 1 << i;
+
+ int_at_level ^= mask;
+ set_sr(mask, intclear);
+ do_IRQ(i, regs);
}
}
}
@@ -392,26 +414,6 @@ static __always_inline unsigned long *stack_pointer(struct task_struct *task)
return sp;
}
-static inline void spill_registers(void)
-{
- unsigned int a0, ps;
-
- __asm__ __volatile__ (
- "movi a14, " __stringify(PS_EXCM_BIT | 1) "\n\t"
- "mov a12, a0\n\t"
- "rsr a13, sar\n\t"
- "xsr a14, ps\n\t"
- "movi a0, _spill_registers\n\t"
- "rsync\n\t"
- "callx0 a0\n\t"
- "mov a0, a12\n\t"
- "wsr a13, sar\n\t"
- "wsr a14, ps\n\t"
- :: "a" (&a0), "a" (&ps)
- : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15",
- "memory");
-}
-
void show_trace(struct task_struct *task, unsigned long *sp)
{
unsigned long a0, a1, pc;
diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S
index 68df35f66ce..82109b42e24 100644
--- a/arch/xtensa/kernel/vectors.S
+++ b/arch/xtensa/kernel/vectors.S
@@ -10,7 +10,7 @@
* Public License. See the file "COPYING" in the main directory of
* this archive for more details.
*
- * Copyright (C) 2005 Tensilica, Inc.
+ * Copyright (C) 2005 - 2008 Tensilica, Inc.
*
* Chris Zankel <chris@zankel.net>
*
@@ -366,6 +366,41 @@ ENTRY(_DebugInterruptVector)
ENDPROC(_DebugInterruptVector)
+
+/*
+ * Medium priority level interrupt vectors
+ *
+ * Each takes less than 16 (0x10) bytes, no literals, by placing
+ * the extra 8 bytes that would otherwise be required in the window
+ * vectors area where there is space. With relocatable vectors,
+ * all vectors are within ~ 4 kB range of each other, so we can
+ * simply jump (J) to another vector without having to use JX.
+ *
+ * common_exception code gets current IRQ level in PS.INTLEVEL
+ * and preserves it for the IRQ handling time.
+ */
+
+ .macro irq_entry_level level
+
+ .if XCHAL_EXCM_LEVEL >= \level
+ .section .Level\level\()InterruptVector.text, "ax"
+ENTRY(_Level\level\()InterruptVector)
+ wsr a0, epc1
+ rsr a0, epc\level
+ xsr a0, epc1
+ # branch to user or kernel vector
+ j _SimulateUserKernelVectorException
+ .endif
+
+ .endm
+
+ irq_entry_level 2
+ irq_entry_level 3
+ irq_entry_level 4
+ irq_entry_level 5
+ irq_entry_level 6
+
+
/* Window overflow and underflow handlers.
* The handlers must be 64 bytes apart, first starting with the underflow
* handlers underflow-4 to underflow-12, then the overflow handlers
@@ -396,6 +431,26 @@ ENTRY_ALIGN64(_WindowOverflow4)
ENDPROC(_WindowOverflow4)
+#if XCHAL_EXCM_LEVEL >= 2
+ /* Not a window vector - but a convenient location
+ * (where we know there's space) for continuation of
+ * medium priority interrupt dispatch code.
+ * On entry here, a0 contains PS, and EPC2 contains saved a0:
+ */
+ .align 4
+_SimulateUserKernelVectorException:
+ wsr a0, excsave2
+ movi a0, 4 # LEVEL1_INTERRUPT cause
+ wsr a0, exccause
+ rsr a0, ps
+ bbsi.l a0, PS_UM_BIT, 1f # branch if user mode
+ rsr a0, excsave2 # restore a0
+ j _KernelExceptionVector # simulate kernel vector exception
+1: rsr a0, excsave2 # restore a0
+ j _UserExceptionVector # simulate user vector exception
+#endif
+
+
/* 4-Register Window Underflow Vector (Handler) */
ENTRY_ALIGN64(_WindowUnderflow4)
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 255154f820b..14695240536 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -7,7 +7,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2001 - 2005 Tensilica Inc.
+ * Copyright (C) 2001 - 2008 Tensilica Inc.
*
* Chris Zankel <chris@zankel.net>
* Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
@@ -134,6 +134,26 @@ SECTIONS
RELOCATE_ENTRY(_WindowVectors_text,
.WindowVectors.text);
+#if XCHAL_EXCM_LEVEL >= 2
+ RELOCATE_ENTRY(_Level2InterruptVector_text,
+ .Level2InterruptVector.text);
+#endif
+#if XCHAL_EXCM_LEVEL >= 3
+ RELOCATE_ENTRY(_Level3InterruptVector_text,
+ .Level3InterruptVector.text);
+#endif
+#if XCHAL_EXCM_LEVEL >= 4
+ RELOCATE_ENTRY(_Level4InterruptVector_text,
+ .Level4InterruptVector.text);
+#endif
+#if XCHAL_EXCM_LEVEL >= 5
+ RELOCATE_ENTRY(_Level5InterruptVector_text,
+ .Level5InterruptVector.text);
+#endif
+#if XCHAL_EXCM_LEVEL >= 6
+ RELOCATE_ENTRY(_Level6InterruptVector_text,
+ .Level6InterruptVector.text);
+#endif
RELOCATE_ENTRY(_KernelExceptionVector_text,
.KernelExceptionVector.text);
RELOCATE_ENTRY(_UserExceptionVector_text,
@@ -177,11 +197,53 @@ SECTIONS
XCHAL_DEBUG_VECTOR_VADDR,
4,
.DebugInterruptVector.literal)
+#undef LAST
+#define LAST .DebugInterruptVector.text
+#if XCHAL_EXCM_LEVEL >= 2
+ SECTION_VECTOR (_Level2InterruptVector_text,
+ .Level2InterruptVector.text,
+ XCHAL_INTLEVEL2_VECTOR_VADDR,
+ SIZEOF(LAST), LAST)
+# undef LAST
+# define LAST .Level2InterruptVector.text
+#endif
+#if XCHAL_EXCM_LEVEL >= 3
+ SECTION_VECTOR (_Level3InterruptVector_text,
+ .Level3InterruptVector.text,
+ XCHAL_INTLEVEL3_VECTOR_VADDR,
+ SIZEOF(LAST), LAST)
+# undef LAST
+# define LAST .Level3InterruptVector.text
+#endif
+#if XCHAL_EXCM_LEVEL >= 4
+ SECTION_VECTOR (_Level4InterruptVector_text,
+ .Level4InterruptVector.text,
+ XCHAL_INTLEVEL4_VECTOR_VADDR,
+ SIZEOF(LAST), LAST)
+# undef LAST
+# define LAST .Level4InterruptVector.text
+#endif
+#if XCHAL_EXCM_LEVEL >= 5
+ SECTION_VECTOR (_Level5InterruptVector_text,
+ .Level5InterruptVector.text,
+ XCHAL_INTLEVEL5_VECTOR_VADDR,
+ SIZEOF(LAST), LAST)
+# undef LAST
+# define LAST .Level5InterruptVector.text
+#endif
+#if XCHAL_EXCM_LEVEL >= 6
+ SECTION_VECTOR (_Level6InterruptVector_text,
+ .Level6InterruptVector.text,
+ XCHAL_INTLEVEL6_VECTOR_VADDR,
+ SIZEOF(LAST), LAST)
+# undef LAST
+# define LAST .Level6InterruptVector.text
+#endif
SECTION_VECTOR (_KernelExceptionVector_literal,
.KernelExceptionVector.literal,
XCHAL_KERNEL_VECTOR_VADDR - 4,
- SIZEOF(.DebugInterruptVector.text),
- .DebugInterruptVector.text)
+ SIZEOF(LAST), LAST)
+#undef LAST
SECTION_VECTOR (_KernelExceptionVector_text,
.KernelExceptionVector.text,
XCHAL_KERNEL_VECTOR_VADDR,
diff --git a/arch/xtensa/oprofile/Makefile b/arch/xtensa/oprofile/Makefile
new file mode 100644
index 00000000000..69ffbe80f18
--- /dev/null
+++ b/arch/xtensa/oprofile/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
+ oprof.o cpu_buffer.o buffer_sync.o \
+ event_buffer.o oprofile_files.o \
+ oprofilefs.o oprofile_stats.o \
+ timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) init.o backtrace.o
diff --git a/arch/xtensa/oprofile/backtrace.c b/arch/xtensa/oprofile/backtrace.c
new file mode 100644
index 00000000000..66f32ee2c98
--- /dev/null
+++ b/arch/xtensa/oprofile/backtrace.c
@@ -0,0 +1,171 @@
+/**
+ * @file backtrace.c
+ *
+ * @remark Copyright 2008 Tensilica Inc.
+ * @remark Read the file COPYING
+ *
+ */
+
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/ptrace.h>
+#include <asm/uaccess.h>
+#include <asm/traps.h>
+
+/* Address of common_exception_return, used to check the
+ * transition from kernel to user space.
+ */
+extern int common_exception_return;
+
+/* A struct that maps to the part of the frame containing the a0 and
+ * a1 registers.
+ */
+struct frame_start {
+ unsigned long a0;
+ unsigned long a1;
+};
+
+static void xtensa_backtrace_user(struct pt_regs *regs, unsigned int depth)
+{
+ unsigned long windowstart = regs->windowstart;
+ unsigned long windowbase = regs->windowbase;
+ unsigned long a0 = regs->areg[0];
+ unsigned long a1 = regs->areg[1];
+ unsigned long pc = MAKE_PC_FROM_RA(a0, regs->pc);
+ int index;
+
+ /* First add the current PC to the trace. */
+ if (pc != 0 && pc <= TASK_SIZE)
+ oprofile_add_trace(pc);
+ else
+ return;
+
+ /* Two steps:
+ *
+ * 1. Look through the register window for the
+ * previous PCs in the call trace.
+ *
+ * 2. Look on the stack.
+ */
+
+ /* Step 1. */
+ /* Rotate WINDOWSTART to move the bit corresponding to
+ * the current window to the bit #0.
+ */
+ windowstart = (windowstart << WSBITS | windowstart) >> windowbase;
+
+ /* Look for bits that are set, they correspond to
+ * valid windows.
+ */
+ for (index = WSBITS - 1; (index > 0) && depth; depth--, index--)
+ if (windowstart & (1 << index)) {
+ /* Read a0 and a1 from the
+ * corresponding position in AREGs.
+ */
+ a0 = regs->areg[index * 4];
+ a1 = regs->areg[index * 4 + 1];
+ /* Get the PC from a0 and a1. */
+ pc = MAKE_PC_FROM_RA(a0, pc);
+
+ /* Add the PC to the trace. */
+ if (pc != 0 && pc <= TASK_SIZE)
+ oprofile_add_trace(pc);
+ else
+ return;
+ }
+
+ /* Step 2. */
+ /* We are done with the register window, we need to
+ * look through the stack.
+ */
+ if (depth > 0) {
+ /* Start from the a1 register. */
+ /* a1 = regs->areg[1]; */
+ while (a0 != 0 && depth--) {
+
+ struct frame_start frame_start;
+ /* Get the location for a1, a0 for the
+ * previous frame from the current a1.
+ */
+ unsigned long *psp = (unsigned long *)a1;
+ psp -= 4;
+
+ /* Check if the region is OK to access. */
+ if (!access_ok(VERIFY_READ, psp, sizeof(frame_start)))
+ return;
+ /* Copy a1, a0 from user space stack frame. */
+ if (__copy_from_user_inatomic(&frame_start, psp,
+ sizeof(frame_start)))
+ return;
+
+ a0 = frame_start.a0;
+ a1 = frame_start.a1;
+ pc = MAKE_PC_FROM_RA(a0, pc);
+
+ if (pc != 0 && pc <= TASK_SIZE)
+ oprofile_add_trace(pc);
+ else
+ return;
+ }
+ }
+}
+
+static void xtensa_backtrace_kernel(struct pt_regs *regs, unsigned int depth)
+{
+ unsigned long pc = regs->pc;
+ unsigned long *psp;
+ unsigned long sp_start, sp_end;
+ unsigned long a0 = regs->areg[0];
+ unsigned long a1 = regs->areg[1];
+
+ sp_start = a1 & ~(THREAD_SIZE-1);
+ sp_end = sp_start + THREAD_SIZE;
+
+ /* Spill the register window to the stack first. */
+ spill_registers();
+
+ /* Read the stack frames one by one and create the PC
+ * from the a0 and a1 registers saved there.
+ */
+ while (a1 > sp_start && a1 < sp_end && depth--) {
+ pc = MAKE_PC_FROM_RA(a0, pc);
+
+ /* Add the PC to the trace. */
+ if (kernel_text_address(pc))
+ oprofile_add_trace(pc);
+
+ if (pc == (unsigned long) &common_exception_return) {
+ regs = (struct pt_regs *)a1;
+ if (user_mode(regs)) {
+ pc = regs->pc;
+ if (pc != 0 && pc <= TASK_SIZE)
+ oprofile_add_trace(pc);
+ else
+ return;
+ return xtensa_backtrace_user(regs, depth);
+ }
+ a0 = regs->areg[0];
+ a1 = regs->areg[1];
+ continue;
+ }
+
+ psp = (unsigned long *)a1;
+
+ a0 = *(psp - 4);
+ a1 = *(psp - 3);
+
+ if (a1 <= (unsigned long)psp)
+ return;
+
+ }
+ return;
+}
+
+void xtensa_backtrace(struct pt_regs * const regs, unsigned int depth)
+{
+ if (user_mode(regs))
+ xtensa_backtrace_user(regs, depth);
+ else
+ xtensa_backtrace_kernel(regs, depth);
+}
diff --git a/arch/xtensa/oprofile/init.c b/arch/xtensa/oprofile/init.c
new file mode 100644
index 00000000000..a67eea37976
--- /dev/null
+++ b/arch/xtensa/oprofile/init.c
@@ -0,0 +1,26 @@
+/**
+ * @file init.c
+ *
+ * @remark Copyright 2008 Tensilica Inc.
+ * @remark Read the file COPYING
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/oprofile.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+
+extern void xtensa_backtrace(struct pt_regs *const regs, unsigned int depth);
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+ ops->backtrace = xtensa_backtrace;
+ return -ENODEV;
+}
+
+
+void oprofile_arch_exit(void)
+{
+}
diff --git a/arch/xtensa/platforms/iss/Makefile b/arch/xtensa/platforms/iss/Makefile
index b7d1a5c0ff7..d2369b799c5 100644
--- a/arch/xtensa/platforms/iss/Makefile
+++ b/arch/xtensa/platforms/iss/Makefile
@@ -6,3 +6,4 @@
obj-y = console.o setup.o
obj-$(CONFIG_NET) += network.o
+obj-$(CONFIG_BLK_DEV_SIMDISK) += simdisk.o
diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c
new file mode 100644
index 00000000000..f58ffc3b68a
--- /dev/null
+++ b/arch/xtensa/platforms/iss/simdisk.c
@@ -0,0 +1,375 @@
+/*
+ * arch/xtensa/platforms/iss/simdisk.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001-2013 Tensilica Inc.
+ * Authors Victor Prupis
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/blkdev.h>
+#include <linux/bio.h>
+#include <linux/proc_fs.h>
+#include <asm/uaccess.h>
+#include <platform/simcall.h>
+
+#define SIMDISK_MAJOR 240
+#define SECTOR_SHIFT 9
+#define SIMDISK_MINORS 1
+#define MAX_SIMDISK_COUNT 10
+
+struct simdisk {
+ const char *filename;
+ spinlock_t lock;
+ struct request_queue *queue;
+ struct gendisk *gd;
+ struct proc_dir_entry *procfile;
+ int users;
+ unsigned long size;
+ int fd;
+};
+
+
+static int simdisk_count = CONFIG_BLK_DEV_SIMDISK_COUNT;
+module_param(simdisk_count, int, S_IRUGO);
+MODULE_PARM_DESC(simdisk_count, "Number of simdisk units.");
+
+static int n_files;
+static const char *filename[MAX_SIMDISK_COUNT] = {
+#ifdef CONFIG_SIMDISK0_FILENAME
+ CONFIG_SIMDISK0_FILENAME,
+#ifdef CONFIG_SIMDISK1_FILENAME
+ CONFIG_SIMDISK1_FILENAME,
+#endif
+#endif
+};
+
+static int simdisk_param_set_filename(const char *val,
+ const struct kernel_param *kp)
+{
+ if (n_files < ARRAY_SIZE(filename))
+ filename[n_files++] = val;
+ else
+ return -EINVAL;
+ return 0;
+}
+
+static const struct kernel_param_ops simdisk_param_ops_filename = {
+ .set = simdisk_param_set_filename,
+};
+module_param_cb(filename, &simdisk_param_ops_filename, &n_files, 0);
+MODULE_PARM_DESC(filename, "Backing storage filename.");
+
+static int simdisk_major = SIMDISK_MAJOR;
+
+static void simdisk_transfer(struct simdisk *dev, unsigned long sector,
+ unsigned long nsect, char *buffer, int write)
+{
+ unsigned long offset = sector << SECTOR_SHIFT;
+ unsigned long nbytes = nsect << SECTOR_SHIFT;
+
+ if (offset > dev->size || dev->size - offset < nbytes) {
+ pr_notice("Beyond-end %s (%ld %ld)\n",
+ write ? "write" : "read", offset, nbytes);
+ return;
+ }
+
+ spin_lock(&dev->lock);
+ while (nbytes > 0) {
+ unsigned long io;
+
+ __simc(SYS_lseek, dev->fd, offset, SEEK_SET, 0, 0);
+ if (write)
+ io = simc_write(dev->fd, buffer, nbytes);
+ else
+ io = simc_read(dev->fd, buffer, nbytes);
+ if (io == -1) {
+ pr_err("SIMDISK: IO error %d\n", errno);
+ break;
+ }
+ buffer += io;
+ offset += io;
+ nbytes -= io;
+ }
+ spin_unlock(&dev->lock);
+}
+
+static int simdisk_xfer_bio(struct simdisk *dev, struct bio *bio)
+{
+ int i;
+ struct bio_vec *bvec;
+ sector_t sector = bio->bi_sector;
+
+ bio_for_each_segment(bvec, bio, i) {
+ char *buffer = __bio_kmap_atomic(bio, i, KM_USER0);
+ unsigned len = bvec->bv_len >> SECTOR_SHIFT;
+
+ simdisk_transfer(dev, sector, len, buffer,
+ bio_data_dir(bio) == WRITE);
+ sector += len;
+ __bio_kunmap_atomic(bio, KM_USER0);
+ }
+ return 0;
+}
+
+static void simdisk_make_request(struct request_queue *q, struct bio *bio)
+{
+ struct simdisk *dev = q->queuedata;
+ int status = simdisk_xfer_bio(dev, bio);
+ bio_endio(bio, status);
+}
+
+
+static int simdisk_open(struct block_device *bdev, fmode_t mode)
+{
+ struct simdisk *dev = bdev->bd_disk->private_data;
+
+ spin_lock(&dev->lock);
+ if (!dev->users)
+ check_disk_change(bdev);
+ ++dev->users;
+ spin_unlock(&dev->lock);
+ return 0;
+}
+
+static int simdisk_release(struct gendisk *disk, fmode_t mode)
+{
+ struct simdisk *dev = disk->private_data;
+ spin_lock(&dev->lock);
+ --dev->users;
+ spin_unlock(&dev->lock);
+ return 0;
+}
+
+static const struct block_device_operations simdisk_ops = {
+ .owner = THIS_MODULE,
+ .open = simdisk_open,
+ .release = simdisk_release,
+};
+
+static struct simdisk *sddev;
+static struct proc_dir_entry *simdisk_procdir;
+
+static int simdisk_attach(struct simdisk *dev, const char *filename)
+{
+ int err = 0;
+
+ filename = kstrdup(filename, GFP_KERNEL);
+ if (filename == NULL)
+ return -ENOMEM;
+
+ spin_lock(&dev->lock);
+
+ if (dev->fd != -1) {
+ err = -EBUSY;
+ goto out;
+ }
+ dev->fd = simc_open(filename, O_RDWR, 0);
+ if (dev->fd == -1) {
+ pr_err("SIMDISK: Can't open %s: %d\n", filename, errno);
+ err = -ENODEV;
+ goto out;
+ }
+ dev->size = __simc(SYS_lseek, dev->fd, 0, SEEK_END, 0, 0);
+ set_capacity(dev->gd, dev->size >> SECTOR_SHIFT);
+ dev->filename = filename;
+ pr_info("SIMDISK: %s=%s\n", dev->gd->disk_name, dev->filename);
+out:
+ if (err)
+ kfree(filename);
+ spin_unlock(&dev->lock);
+
+ return err;
+}
+
+static int simdisk_detach(struct simdisk *dev)
+{
+ int err = 0;
+
+ spin_lock(&dev->lock);
+
+ if (dev->users != 0) {
+ err = -EBUSY;
+ } else if (dev->fd != -1) {
+ if (simc_close(dev->fd)) {
+ pr_err("SIMDISK: error closing %s: %d\n",
+ dev->filename, errno);
+ err = -EIO;
+ } else {
+ pr_info("SIMDISK: %s detached from %s\n",
+ dev->gd->disk_name, dev->filename);
+ dev->fd = -1;
+ kfree(dev->filename);
+ dev->filename = NULL;
+ }
+ }
+ spin_unlock(&dev->lock);
+ return err;
+}
+
+static int proc_read_simdisk(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int len;
+ struct simdisk *dev = (struct simdisk *) data;
+ len = sprintf(page, "%s\n", dev->filename ? dev->filename : "");
+ return len;
+}
+
+static int proc_write_simdisk(struct file *file, const char *buffer,
+ unsigned long count, void *data)
+{
+ char *tmp = kmalloc(count + 1, GFP_KERNEL);
+ struct simdisk *dev = (struct simdisk *) data;
+ int err;
+
+ if (tmp == NULL)
+ return -ENOMEM;
+ if (copy_from_user(tmp, buffer, count)) {
+ err = -EFAULT;
+ goto out_free;
+ }
+
+ err = simdisk_detach(dev);
+ if (err != 0)
+ goto out_free;
+
+ if (count > 0 && tmp[count - 1] == '\n')
+ tmp[count - 1] = 0;
+ else
+ tmp[count] = 0;
+
+ if (tmp[0])
+ err = simdisk_attach(dev, tmp);
+
+ if (err == 0)
+ err = count;
+out_free:
+ kfree(tmp);
+ return err;
+}
+
+static int __init simdisk_setup(struct simdisk *dev, int which,
+ struct proc_dir_entry *procdir)
+{
+ char tmp[2] = { '0' + which, 0 };
+
+ dev->fd = -1;
+ dev->filename = NULL;
+ spin_lock_init(&dev->lock);
+ dev->users = 0;
+
+ dev->queue = blk_alloc_queue(GFP_KERNEL);
+ if (dev->queue == NULL) {
+ pr_err("blk_alloc_queue failed\n");
+ goto out_alloc_queue;
+ }
+
+ blk_queue_make_request(dev->queue, simdisk_make_request);
+ dev->queue->queuedata = dev;
+
+ dev->gd = alloc_disk(SIMDISK_MINORS);
+ if (dev->gd == NULL) {
+ pr_err("alloc_disk failed\n");
+ goto out_alloc_disk;
+ }
+ dev->gd->major = simdisk_major;
+ dev->gd->first_minor = which;
+ dev->gd->fops = &simdisk_ops;
+ dev->gd->queue = dev->queue;
+ dev->gd->private_data = dev;
+ snprintf(dev->gd->disk_name, 32, "simdisk%d", which);
+ set_capacity(dev->gd, 0);
+ add_disk(dev->gd);
+
+ dev->procfile = create_proc_entry(tmp, 0644, procdir);
+ dev->procfile->data = dev;
+ dev->procfile->read_proc = proc_read_simdisk;
+ dev->procfile->write_proc = proc_write_simdisk;
+ return 0;
+
+out_alloc_disk:
+ blk_cleanup_queue(dev->queue);
+ dev->queue = NULL;
+out_alloc_queue:
+ simc_close(dev->fd);
+ return -EIO;
+}
+
+static int __init simdisk_init(void)
+{
+ int i;
+
+ if (register_blkdev(simdisk_major, "simdisk") < 0) {
+ pr_err("SIMDISK: register_blkdev: %d\n", simdisk_major);
+ return -EIO;
+ }
+ pr_info("SIMDISK: major: %d\n", simdisk_major);
+
+ if (n_files > simdisk_count)
+ simdisk_count = n_files;
+ if (simdisk_count > MAX_SIMDISK_COUNT)
+ simdisk_count = MAX_SIMDISK_COUNT;
+
+ sddev = kmalloc(simdisk_count * sizeof(struct simdisk),
+ GFP_KERNEL);
+ if (sddev == NULL)
+ goto out_unregister;
+
+ simdisk_procdir = proc_mkdir("simdisk", 0);
+ if (simdisk_procdir == NULL)
+ goto out_free_unregister;
+
+ for (i = 0; i < simdisk_count; ++i) {
+ if (simdisk_setup(sddev + i, i, simdisk_procdir) == 0) {
+ if (filename[i] != NULL && filename[i][0] != 0 &&
+ (n_files == 0 || i < n_files))
+ simdisk_attach(sddev + i, filename[i]);
+ }
+ }
+
+ return 0;
+
+out_free_unregister:
+ kfree(sddev);
+out_unregister:
+ unregister_blkdev(simdisk_major, "simdisk");
+ return -ENOMEM;
+}
+module_init(simdisk_init);
+
+static void simdisk_teardown(struct simdisk *dev, int which,
+ struct proc_dir_entry *procdir)
+{
+ char tmp[2] = { '0' + which, 0 };
+
+ simdisk_detach(dev);
+ if (dev->gd)
+ del_gendisk(dev->gd);
+ if (dev->queue)
+ blk_cleanup_queue(dev->queue);
+ remove_proc_entry(tmp, procdir);
+}
+
+static void __exit simdisk_exit(void)
+{
+ int i;
+
+ for (i = 0; i < simdisk_count; ++i)
+ simdisk_teardown(sddev + i, i, simdisk_procdir);
+ remove_proc_entry("simdisk", 0);
+ kfree(sddev);
+ unregister_blkdev(simdisk_major, "simdisk");
+}
+module_exit(simdisk_exit);
+
+MODULE_ALIAS_BLOCKDEV_MAJOR(SIMDISK_MAJOR);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c
index 4b9951a4569..9d888a2a575 100644
--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -100,7 +100,7 @@ static void __init update_clock_frequency(struct device_node *node)
}
*(u32 *)newfreq->value = cpu_to_be32(*(u32 *)XTFPGA_CLKFRQ_VADDR);
- prom_update_property(node, newfreq);
+ of_update_property(node, newfreq);
}
#define MAC_LEN 6
@@ -128,7 +128,7 @@ static void __init update_local_mac(struct device_node *node)
memcpy(newmac->value, macaddr, MAC_LEN);
((u8*)newmac->value)[5] = (*(u32*)DIP_SWITCHES_VADDR) & 0x3f;
- prom_update_property(node, newmac);
+ of_update_property(node, newmac);
}
static int __init machine_setup(void)
diff --git a/arch/xtensa/variants/dc233c/include/variant/core.h b/arch/xtensa/variants/dc233c/include/variant/core.h
new file mode 100644
index 00000000000..3a2e53b9493
--- /dev/null
+++ b/arch/xtensa/variants/dc233c/include/variant/core.h
@@ -0,0 +1,475 @@
+/*
+ * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa
+ * processor CORE configuration
+ *
+ * See <xtensa/config/core.h>, which includes this file, for more details.
+ */
+
+/* Xtensa processor core configuration information.
+
+ Copyright (c) 1999-2010 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+ Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ * configured, and a value of 0 otherwise. These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+ ISA
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */
+#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG 1 /* debug option */
+#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */
+#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32 1 /* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R 1 /* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */
+#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */
+#define XCHAL_HAVE_ABS 1 /* ABS instruction */
+/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */
+/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION 0 /* speculation */
+#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS 1 /* */
+#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID 1 /* processor ID register */
+#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */
+#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */
+#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */
+#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */
+#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG 8 /* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16 1 /* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */
+#define XCHAL_HAVE_FP 0 /* floating point pkg */
+#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */
+#define XCHAL_HAVE_DFP_accel 0 /* double precision FP acceleration pkg */
+#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */
+#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */
+#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */
+#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */
+#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */
+#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */
+#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */
+#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */
+#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */
+#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */
+#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */
+#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */
+#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */
+
+
+/*----------------------------------------------------------------------
+ MISC
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH 4 /* data width in bytes */
+/* In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/
+#define XCHAL_UNALIGNED_LOAD_HW 0 /* unaligned loads work in hw */
+#define XCHAL_UNALIGNED_STORE_HW 0 /* unaligned stores work in hw*/
+
+#define XCHAL_SW_VERSION 900001 /* sw version of this header */
+
+#define XCHAL_CORE_ID "dc233c" /* alphanum core name
+ (CoreID) set in the Xtensa
+ Processor Generator */
+
+#define XCHAL_CORE_DESCRIPTION "dc233c"
+#define XCHAL_BUILD_UNIQUE_ID 0x00004B21 /* 22-bit sw build ID */
+
+/*
+ * These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0 0xC56707FE /* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1 0x14404B21 /* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME "LX4.0.1" /* full version name */
+#define XCHAL_HW_VERSION_MAJOR 2400 /* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR 1 /* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION 240001 /* major*100+minor */
+#define XCHAL_HW_REL_LX4 1
+#define XCHAL_HW_REL_LX4_0 1
+#define XCHAL_HW_REL_LX4_0_1 1
+#define XCHAL_HW_CONFIGID_RELIABLE 1
+/* If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR 2400 /* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR 1 /* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION 240001 /* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR 2400 /* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR 1 /* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION 240001 /* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+ CACHE
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE 32 /* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE 32 /* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH 5 /* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH 5 /* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE 16384 /* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE 16384 /* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */
+#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */
+
+#define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */
+
+
+
+
+/****************************************************************************
+ Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+ CACHE
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */
+
+/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */
+
+/* Number of cache sets in log2(lines per way): */
+#define XCHAL_ICACHE_SETWIDTH 7
+#define XCHAL_DCACHE_SETWIDTH 7
+
+/* Cache set associativity (number of ways): */
+#define XCHAL_ICACHE_WAYS 4
+#define XCHAL_DCACHE_WAYS 4
+
+/* Cache features: */
+#define XCHAL_ICACHE_LINE_LOCKABLE 1
+#define XCHAL_DCACHE_LINE_LOCKABLE 1
+#define XCHAL_ICACHE_ECC_PARITY 0
+#define XCHAL_DCACHE_ECC_PARITY 0
+
+/* Cache access size in bytes (affects operation of SICW instruction): */
+#define XCHAL_ICACHE_ACCESS_SIZE 4
+#define XCHAL_DCACHE_ACCESS_SIZE 4
+
+/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */
+#define XCHAL_CA_BITS 4
+
+
+/*----------------------------------------------------------------------
+ INTERNAL I/D RAM/ROMs and XLMI
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */
+#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */
+#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */
+
+#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/
+
+
+/*----------------------------------------------------------------------
+ INTERRUPTS and TIMERS
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS 22 /* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS 17 /* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels
+ (not including level zero) */
+#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */
+ /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/* Masks of interrupts at each interrupt level: */
+#define XCHAL_INTLEVEL1_MASK 0x001F80FF
+#define XCHAL_INTLEVEL2_MASK 0x00000100
+#define XCHAL_INTLEVEL3_MASK 0x00200E00
+#define XCHAL_INTLEVEL4_MASK 0x00001000
+#define XCHAL_INTLEVEL5_MASK 0x00002000
+#define XCHAL_INTLEVEL6_MASK 0x00000000
+#define XCHAL_INTLEVEL7_MASK 0x00004000
+
+/* Masks of interrupts at each range 1..n of interrupt levels: */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x001F80FF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x001F81FF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x003F8FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x003F9FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x003FBFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x003FBFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x003FFFFF
+
+/* Level of each interrupt: */
+#define XCHAL_INT0_LEVEL 1
+#define XCHAL_INT1_LEVEL 1
+#define XCHAL_INT2_LEVEL 1
+#define XCHAL_INT3_LEVEL 1
+#define XCHAL_INT4_LEVEL 1
+#define XCHAL_INT5_LEVEL 1
+#define XCHAL_INT6_LEVEL 1
+#define XCHAL_INT7_LEVEL 1
+#define XCHAL_INT8_LEVEL 2
+#define XCHAL_INT9_LEVEL 3
+#define XCHAL_INT10_LEVEL 3
+#define XCHAL_INT11_LEVEL 3
+#define XCHAL_INT12_LEVEL 4
+#define XCHAL_INT13_LEVEL 5
+#define XCHAL_INT14_LEVEL 7
+#define XCHAL_INT15_LEVEL 1
+#define XCHAL_INT16_LEVEL 1
+#define XCHAL_INT17_LEVEL 1
+#define XCHAL_INT18_LEVEL 1
+#define XCHAL_INT19_LEVEL 1
+#define XCHAL_INT20_LEVEL 1
+#define XCHAL_INT21_LEVEL 3
+#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */
+#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with
+ EXCSAVE/EPS/EPC_n, RFI n) */
+
+/* Type of each interrupt: */
+#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI
+#define XCHAL_INT15_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+
+/* Masks of interrupts for each type of interrupt: */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFC00000
+#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000880
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x003F8000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000133F
+#define XCHAL_INTTYPE_MASK_TIMER 0x00002440
+#define XCHAL_INTTYPE_MASK_NMI 0x00004000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000
+
+/* Interrupt numbers assigned to specific interrupt sources: */
+#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT 10 /* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT 13 /* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */
+
+/* Interrupt numbers for levels at which only one interrupt is configured: */
+#define XCHAL_INTLEVEL2_NUM 8
+#define XCHAL_INTLEVEL4_NUM 12
+#define XCHAL_INTLEVEL5_NUM 13
+#define XCHAL_INTLEVEL7_NUM 14
+/* (There are many interrupts each at level(s) 1, 3.) */
+
+
+/*
+ * External interrupt vectors/levels.
+ * These macros describe how Xtensa processor interrupt numbers
+ * (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ * map to external BInterrupt<n> pins, for those interrupts
+ * configured as external (level-triggered, edge-triggered, or NMI).
+ * See the Xtensa processor databook for more details.
+ */
+
+/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */
+#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM 8 /* (intlevel 2) */
+#define XCHAL_EXTINT7_NUM 9 /* (intlevel 3) */
+#define XCHAL_EXTINT8_NUM 12 /* (intlevel 4) */
+#define XCHAL_EXTINT9_NUM 14 /* (intlevel 7) */
+#define XCHAL_EXTINT10_NUM 15 /* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM 16 /* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM 19 /* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM 20 /* (intlevel 1) */
+#define XCHAL_EXTINT16_NUM 21 /* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+ EXCEPTIONS and VECTORS
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture
+ number: 1 == XEA1 (old)
+ 2 == XEA2 (new)
+ 0 == XEAX (extern) or TX */
+#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */
+#define XCHAL_HAVE_HALT 0 /* halt architecture option */
+#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */
+#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */
+#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR 0x00002000 /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR 0x00002000
+#define XCHAL_RESET_VECBASE_OVERLAP 0
+
+#define XCHAL_RESET_VECTOR0_VADDR 0xFE000000
+#define XCHAL_RESET_VECTOR0_PADDR 0xFE000000
+#define XCHAL_RESET_VECTOR1_VADDR 0x00001000
+#define XCHAL_RESET_VECTOR1_PADDR 0x00001000
+#define XCHAL_RESET_VECTOR_VADDR 0xFE000000
+#define XCHAL_RESET_VECTOR_PADDR 0xFE000000
+#define XCHAL_USER_VECOFS 0x00000340
+#define XCHAL_USER_VECTOR_VADDR 0x00002340
+#define XCHAL_USER_VECTOR_PADDR 0x00002340
+#define XCHAL_KERNEL_VECOFS 0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR 0x00002300
+#define XCHAL_KERNEL_VECTOR_PADDR 0x00002300
+#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x000023C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x000023C0
+#define XCHAL_WINDOW_OF4_VECOFS 0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS 0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS 0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS 0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS 0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR 0x00002000
+#define XCHAL_WINDOW_VECTORS_PADDR 0x00002000
+#define XCHAL_INTLEVEL2_VECOFS 0x00000180
+#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x00002180
+#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00002180
+#define XCHAL_INTLEVEL3_VECOFS 0x000001C0
+#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x000021C0
+#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x000021C0
+#define XCHAL_INTLEVEL4_VECOFS 0x00000200
+#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x00002200
+#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x00002200
+#define XCHAL_INTLEVEL5_VECOFS 0x00000240
+#define XCHAL_INTLEVEL5_VECTOR_VADDR 0x00002240
+#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x00002240
+#define XCHAL_INTLEVEL6_VECOFS 0x00000280
+#define XCHAL_INTLEVEL6_VECTOR_VADDR 0x00002280
+#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x00002280
+#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS 0x000002C0
+#define XCHAL_NMI_VECTOR_VADDR 0x000022C0
+#define XCHAL_NMI_VECTOR_PADDR 0x000022C0
+#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+ DEBUG
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */
+#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option */
+
+
+/*----------------------------------------------------------------------
+ MMU
+ ----------------------------------------------------------------------*/
+
+/* See core-matmap.h header file for more details. */
+
+#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */
+#define XCHAL_SPANNING_WAY 6 /* TLB spanning way number */
+#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU 1 /* full MMU (with page table
+ [autorefill] and protection)
+ usable for an MMU-based OS */
+/* If none of the above last 4 are set, it's a custom TLB configuration. */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS 4 /* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS 2 /* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+
diff --git a/arch/xtensa/variants/dc233c/include/variant/tie-asm.h b/arch/xtensa/variants/dc233c/include/variant/tie-asm.h
new file mode 100644
index 00000000000..5dbd981ea42
--- /dev/null
+++ b/arch/xtensa/variants/dc233c/include/variant/tie-asm.h
@@ -0,0 +1,193 @@
+/*
+ * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE
+ *
+ * NOTE: This header file is not meant to be included directly.
+ */
+
+/* This header file contains assembly-language definitions (assembly
+ macros, etc.) for this specific Xtensa processor's TIE extensions
+ and options. It is customized to this Xtensa processor configuration.
+
+ Copyright (c) 1999-2010 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/* Selection parameter values for save-area save/restore macros: */
+/* Option vs. TIE: */
+#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */
+#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */
+#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */
+/* Whether used automatically by compiler: */
+#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */
+#define XTHAL_SAS_ANYCC 0x000C /* both of the above */
+/* ABI handling across function calls: */
+#define XTHAL_SAS_CALR 0x0010 /* caller-saved */
+#define XTHAL_SAS_CALE 0x0020 /* callee-saved */
+#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */
+#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */
+/* Misc */
+#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */
+#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \
+ | ((ccuse) & XTHAL_SAS_ANYCC) \
+ | ((abi) & XTHAL_SAS_ANYABI) )
+
+
+
+ /*
+ * Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Required parameters:
+ * ptr Save area pointer address register (clobbered)
+ * (register must contain a 4 byte aligned address).
+ * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+ * registers are clobbered, the remaining are unused).
+ * Optional parameters:
+ * continue If macro invoked as part of a larger store sequence, set to 1
+ * if this is not the first in the sequence. Defaults to 0.
+ * ofs Offset from start of larger sequence (from value of first ptr
+ * in sequence) at which to store. Defaults to next available space
+ * (or 0 if <continue> is 0).
+ * select Select what category(ies) of registers to store, as a bitmask
+ * (see XTHAL_SAS_xxx constants). Defaults to all registers.
+ * alloc Select what category(ies) of registers to allocate; if any
+ * category is selected here that is not in <select>, space for
+ * the corresponding registers is skipped without doing any store.
+ */
+ .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+ xchal_sa_start \continue, \ofs
+ // Optional global register used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
+ xchal_sa_align \ptr, 0, 1020, 4, 4
+ rur.THREADPTR \at1 // threadptr option
+ s32i \at1, \ptr, .Lxchal_ofs_+0
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 4
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1020, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 4
+ .endif
+ // Optional caller-saved registers used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ rsr \at1, ACCLO // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+0
+ rsr \at1, ACCHI // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .endif
+ // Optional caller-saved registers not used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 1004, 4, 4
+ rsr \at1, M0 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+0
+ rsr \at1, M1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+4
+ rsr \at1, M2 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+8
+ rsr \at1, M3 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+12
+ rsr \at1, SCOMPARE1 // conditional store option
+ s32i \at1, \ptr, .Lxchal_ofs_+16
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 20
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1004, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 20
+ .endif
+ .endm // xchal_ncp_store
+
+ /*
+ * Macro to restore all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Required parameters:
+ * ptr Save area pointer address register (clobbered)
+ * (register must contain a 4 byte aligned address).
+ * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+ * registers are clobbered, the remaining are unused).
+ * Optional parameters:
+ * continue If macro invoked as part of a larger load sequence, set to 1
+ * if this is not the first in the sequence. Defaults to 0.
+ * ofs Offset from start of larger sequence (from value of first ptr
+ * in sequence) at which to load. Defaults to next available space
+ * (or 0 if <continue> is 0).
+ * select Select what category(ies) of registers to load, as a bitmask
+ * (see XTHAL_SAS_xxx constants). Defaults to all registers.
+ * alloc Select what category(ies) of registers to allocate; if any
+ * category is selected here that is not in <select>, space for
+ * the corresponding registers is skipped without doing any load.
+ */
+ .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+ xchal_sa_start \continue, \ofs
+ // Optional global register used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
+ xchal_sa_align \ptr, 0, 1020, 4, 4
+ l32i \at1, \ptr, .Lxchal_ofs_+0
+ wur.THREADPTR \at1 // threadptr option
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 4
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1020, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 4
+ .endif
+ // Optional caller-saved registers used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ l32i \at1, \ptr, .Lxchal_ofs_+0
+ wsr \at1, ACCLO // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+4
+ wsr \at1, ACCHI // MAC16 option
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .endif
+ // Optional caller-saved registers not used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 1004, 4, 4
+ l32i \at1, \ptr, .Lxchal_ofs_+0
+ wsr \at1, M0 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+4
+ wsr \at1, M1 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+8
+ wsr \at1, M2 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+12
+ wsr \at1, M3 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+16
+ wsr \at1, SCOMPARE1 // conditional store option
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 20
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1004, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 20
+ .endif
+ .endm // xchal_ncp_load
+
+
+#define XCHAL_NCP_NUM_ATMPS 1
+
+
+
+#define XCHAL_SA_NUM_ATMPS 1
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
+
diff --git a/arch/xtensa/variants/dc233c/include/variant/tie.h b/arch/xtensa/variants/dc233c/include/variant/tie.h
new file mode 100644
index 00000000000..815e52bc3d0
--- /dev/null
+++ b/arch/xtensa/variants/dc233c/include/variant/tie.h
@@ -0,0 +1,150 @@
+/*
+ * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration
+ *
+ * NOTE: This header file is not meant to be included directly.
+ */
+
+/* This header file describes this specific Xtensa processor's TIE extensions
+ that extend basic Xtensa core functionality. It is customized to this
+ Xtensa processor configuration.
+
+ Copyright (c) 1999-2010 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM 1 /* number of coprocessors */
+#define XCHAL_CP_MAX 8 /* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK 0x80 /* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK 0x80 /* bitmask of only port CPs */
+
+/* Basic parameters of each coprocessor: */
+#define XCHAL_CP7_NAME "XTIOP"
+#define XCHAL_CP7_IDENT XTIOP
+#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */
+#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */
+#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */
+
+/* Filler info for unassigned coprocessors, to simplify arrays etc: */
+#define XCHAL_CP0_SA_SIZE 0
+#define XCHAL_CP0_SA_ALIGN 1
+#define XCHAL_CP1_SA_SIZE 0
+#define XCHAL_CP1_SA_ALIGN 1
+#define XCHAL_CP2_SA_SIZE 0
+#define XCHAL_CP2_SA_ALIGN 1
+#define XCHAL_CP3_SA_SIZE 0
+#define XCHAL_CP3_SA_ALIGN 1
+#define XCHAL_CP4_SA_SIZE 0
+#define XCHAL_CP4_SA_ALIGN 1
+#define XCHAL_CP5_SA_SIZE 0
+#define XCHAL_CP5_SA_ALIGN 1
+#define XCHAL_CP6_SA_SIZE 0
+#define XCHAL_CP6_SA_ALIGN 1
+
+/* Save area for non-coprocessor optional and custom (TIE) state: */
+#define XCHAL_NCP_SA_SIZE 32
+#define XCHAL_NCP_SA_ALIGN 4
+
+/* Total save area for optional and custom state (NCP + CPn): */
+#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE: caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ * dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ * s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ * ccused = set if used by compiler without special options or code
+ * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ * name = lowercase reg name (no quotes)
+ * galign = group byte alignment (power of 2) (galign >= align)
+ * align = register byte alignment (power of 2)
+ * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ * (not including any pad bytes required to galign this or next reg)
+ * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ * base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ * regnum = reg index in regfile, or special/TIE-user reg number
+ * bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ * gapsz = intervening bits, if bitsz bits not stored contiguously
+ * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ * reset = register reset value (or 0 if undefined at reset)
+ * x = reserved for future use (0 until then)
+ *
+ * To filter out certain registers, e.g. to expand only the non-global
+ * registers used by the compiler, you can do something like this:
+ *
+ * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p)
+ * #define SELCC0(p...)
+ * #define SELCC1(abikind,p...) SELAK##abikind(p)
+ * #define SELAK0(p...) REG(p)
+ * #define SELAK1(p...) REG(p)
+ * #define SELAK2(p...)
+ * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ * ...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM 8
+#define XCHAL_NCP_SA_LIST(s) \
+ XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM 0
+#define XCHAL_CP0_SA_LIST(s) /* empty */
+
+#define XCHAL_CP1_SA_NUM 0
+#define XCHAL_CP1_SA_LIST(s) /* empty */
+
+#define XCHAL_CP2_SA_NUM 0
+#define XCHAL_CP2_SA_LIST(s) /* empty */
+
+#define XCHAL_CP3_SA_NUM 0
+#define XCHAL_CP3_SA_LIST(s) /* empty */
+
+#define XCHAL_CP4_SA_NUM 0
+#define XCHAL_CP4_SA_LIST(s) /* empty */
+
+#define XCHAL_CP5_SA_NUM 0
+#define XCHAL_CP5_SA_LIST(s) /* empty */
+
+#define XCHAL_CP6_SA_NUM 0
+#define XCHAL_CP6_SA_LIST(s) /* empty */
+
+#define XCHAL_CP7_SA_NUM 0
+#define XCHAL_CP7_SA_LIST(s) /* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX. */
+#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
+
+#endif /*_XTENSA_CORE_TIE_H*/
+