aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/pata_mpiix.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_mpiix.c')
-rw-r--r--drivers/ata/pata_mpiix.c61
1 files changed, 31 insertions, 30 deletions
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index c4a1b10f3bc..9837faf0f62 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -188,7 +188,7 @@ static struct ata_port_operations mpiix_port_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = mpiix_qc_issue_prot,
- .data_xfer = ata_pio_data_xfer,
+ .data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
@@ -199,10 +199,11 @@ static struct ata_port_operations mpiix_port_ops = {
static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
/* Single threaded by the PCI probe logic */
- static struct ata_probe_ent probe[2];
+ static struct ata_probe_ent probe;
static int printed_version;
+ void __iomem *cmd_addr, *ctl_addr;
u16 idetim;
- int enabled;
+ int irq;
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
@@ -215,43 +216,43 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (!(idetim & ENABLED))
return -ENODEV;
+ if (!(idetim & SECONDARY)) {
+ irq = 14;
+ cmd_addr = devm_ioport_map(&dev->dev, 0x1F0, 8);
+ ctl_addr = devm_ioport_map(&dev->dev, 0x3F6, 1);
+ } else {
+ irq = 15;
+ cmd_addr = devm_ioport_map(&dev->dev, 0x170, 8);
+ ctl_addr = devm_ioport_map(&dev->dev, 0x376, 1);
+ }
+
+ if (!cmd_addr || !ctl_addr)
+ return -ENOMEM;
+
/* We do our own plumbing to avoid leaking special cases for whacko
ancient hardware into the core code. There are two issues to
worry about. #1 The chip is a bridge so if in legacy mode and
without BARs set fools the setup. #2 If you pci_disable_device
the MPIIX your box goes castors up */
- INIT_LIST_HEAD(&probe[0].node);
- probe[0].dev = pci_dev_to_dev(dev);
- probe[0].port_ops = &mpiix_port_ops;
- probe[0].sht = &mpiix_sht;
- probe[0].pio_mask = 0x1F;
- probe[0].irq = 14;
- probe[0].irq_flags = SA_SHIRQ;
- probe[0].port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
- probe[0].n_ports = 1;
- probe[0].port[0].cmd_addr = 0x1F0;
- probe[0].port[0].ctl_addr = 0x3F6;
- probe[0].port[0].altstatus_addr = 0x3F6;
-
- /* The secondary lurks at different addresses but is otherwise
- the same beastie */
-
- INIT_LIST_HEAD(&probe[1].node);
- probe[1] = probe[0];
- probe[1].irq = 15;
- probe[1].port[0].cmd_addr = 0x170;
- probe[1].port[0].ctl_addr = 0x376;
- probe[1].port[0].altstatus_addr = 0x376;
+ INIT_LIST_HEAD(&probe.node);
+ probe.dev = pci_dev_to_dev(dev);
+ probe.port_ops = &mpiix_port_ops;
+ probe.sht = &mpiix_sht;
+ probe.pio_mask = 0x1F;
+ probe.irq = irq;
+ probe.irq_flags = SA_SHIRQ;
+ probe.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+ probe.n_ports = 1;
+ probe.port[0].cmd_addr = cmd_addr;
+ probe.port[0].ctl_addr = ctl_addr;
+ probe.port[0].altstatus_addr = ctl_addr;
/* Let libata fill in the port details */
- ata_std_ports(&probe[0].port[0]);
- ata_std_ports(&probe[1].port[0]);
+ ata_std_ports(&probe.port[0]);
/* Now add the port that is active */
- enabled = (idetim & SECONDARY) ? 1 : 0;
-
- if (ata_device_add(&probe[enabled]))
+ if (ata_device_add(&probe))
return 0;
return -ENODEV;
}