aboutsummaryrefslogtreecommitdiff
path: root/drivers/dma/ste_dma40_ll.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/dma/ste_dma40_ll.h')
-rw-r--r--drivers/dma/ste_dma40_ll.h354
1 files changed, 354 insertions, 0 deletions
diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
new file mode 100644
index 00000000000..2029280cb33
--- /dev/null
+++ b/drivers/dma/ste_dma40_ll.h
@@ -0,0 +1,354 @@
+/*
+ * driver/dma/ste_dma40_ll.h
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef STE_DMA40_LL_H
+#define STE_DMA40_LL_H
+
+#define D40_DREG_PCBASE 0x400
+#define D40_DREG_PCDELTA (8 * 4)
+#define D40_LLI_ALIGN 16 /* LLI alignment must be 16 bytes. */
+
+#define D40_TYPE_TO_GROUP(type) (type / 16)
+#define D40_TYPE_TO_EVENT(type) (type % 16)
+
+/* Most bits of the CFG register are the same in log as in phy mode */
+#define D40_SREG_CFG_MST_POS 15
+#define D40_SREG_CFG_TIM_POS 14
+#define D40_SREG_CFG_EIM_POS 13
+#define D40_SREG_CFG_LOG_INCR_POS 12
+#define D40_SREG_CFG_PHY_PEN_POS 12
+#define D40_SREG_CFG_PSIZE_POS 10
+#define D40_SREG_CFG_ESIZE_POS 8
+#define D40_SREG_CFG_PRI_POS 7
+#define D40_SREG_CFG_LBE_POS 6
+#define D40_SREG_CFG_LOG_GIM_POS 5
+#define D40_SREG_CFG_LOG_MFU_POS 4
+#define D40_SREG_CFG_PHY_TM_POS 4
+#define D40_SREG_CFG_PHY_EVTL_POS 0
+
+
+/* Standard channel parameters - basic mode (element register) */
+#define D40_SREG_ELEM_PHY_ECNT_POS 16
+#define D40_SREG_ELEM_PHY_EIDX_POS 0
+
+#define D40_SREG_ELEM_PHY_ECNT_MASK (0xFFFF << D40_SREG_ELEM_PHY_ECNT_POS)
+
+/* Standard channel parameters - basic mode (Link register) */
+#define D40_SREG_LNK_PHY_TCP_POS 0
+#define D40_SREG_LNK_PHY_LMP_POS 1
+#define D40_SREG_LNK_PHY_PRE_POS 2
+/*
+ * Source destination link address. Contains the
+ * 29-bit byte word aligned address of the reload area.
+ */
+#define D40_SREG_LNK_PHYS_LNK_MASK 0xFFFFFFF8UL
+
+/* Standard basic channel logical mode */
+
+/* Element register */
+#define D40_SREG_ELEM_LOG_ECNT_POS 16
+#define D40_SREG_ELEM_LOG_LIDX_POS 8
+#define D40_SREG_ELEM_LOG_LOS_POS 1
+#define D40_SREG_ELEM_LOG_TCP_POS 0
+
+#define D40_SREG_ELEM_LOG_LIDX_MASK (0xFF << D40_SREG_ELEM_LOG_LIDX_POS)
+
+/* Link register */
+#define D40_DEACTIVATE_EVENTLINE 0x0
+#define D40_ACTIVATE_EVENTLINE 0x1
+#define D40_EVENTLINE_POS(i) (2 * i)
+#define D40_EVENTLINE_MASK(i) (0x3 << D40_EVENTLINE_POS(i))
+
+/* Standard basic channel logical params in memory */
+
+/* LCSP0 */
+#define D40_MEM_LCSP0_ECNT_POS 16
+#define D40_MEM_LCSP0_SPTR_POS 0
+
+#define D40_MEM_LCSP0_ECNT_MASK (0xFFFF << D40_MEM_LCSP0_ECNT_POS)
+#define D40_MEM_LCSP0_SPTR_MASK (0xFFFF << D40_MEM_LCSP0_SPTR_POS)
+
+/* LCSP1 */
+#define D40_MEM_LCSP1_SPTR_POS 16
+#define D40_MEM_LCSP1_SCFG_MST_POS 15
+#define D40_MEM_LCSP1_SCFG_TIM_POS 14
+#define D40_MEM_LCSP1_SCFG_EIM_POS 13
+#define D40_MEM_LCSP1_SCFG_INCR_POS 12
+#define D40_MEM_LCSP1_SCFG_PSIZE_POS 10
+#define D40_MEM_LCSP1_SCFG_ESIZE_POS 8
+#define D40_MEM_LCSP1_SLOS_POS 1
+#define D40_MEM_LCSP1_STCP_POS 0
+
+#define D40_MEM_LCSP1_SPTR_MASK (0xFFFF << D40_MEM_LCSP1_SPTR_POS)
+#define D40_MEM_LCSP1_SCFG_TIM_MASK (0x1 << D40_MEM_LCSP1_SCFG_TIM_POS)
+#define D40_MEM_LCSP1_SCFG_INCR_MASK (0x1 << D40_MEM_LCSP1_SCFG_INCR_POS)
+#define D40_MEM_LCSP1_SCFG_PSIZE_MASK (0x3 << D40_MEM_LCSP1_SCFG_PSIZE_POS)
+#define D40_MEM_LCSP1_SLOS_MASK (0x7F << D40_MEM_LCSP1_SLOS_POS)
+#define D40_MEM_LCSP1_STCP_MASK (0x1 << D40_MEM_LCSP1_STCP_POS)
+
+/* LCSP2 */
+#define D40_MEM_LCSP2_ECNT_POS 16
+
+#define D40_MEM_LCSP2_ECNT_MASK (0xFFFF << D40_MEM_LCSP2_ECNT_POS)
+
+/* LCSP3 */
+#define D40_MEM_LCSP3_DCFG_MST_POS 15
+#define D40_MEM_LCSP3_DCFG_TIM_POS 14
+#define D40_MEM_LCSP3_DCFG_EIM_POS 13
+#define D40_MEM_LCSP3_DCFG_INCR_POS 12
+#define D40_MEM_LCSP3_DCFG_PSIZE_POS 10
+#define D40_MEM_LCSP3_DCFG_ESIZE_POS 8
+#define D40_MEM_LCSP3_DLOS_POS 1
+#define D40_MEM_LCSP3_DTCP_POS 0
+
+#define D40_MEM_LCSP3_DLOS_MASK (0x7F << D40_MEM_LCSP3_DLOS_POS)
+#define D40_MEM_LCSP3_DTCP_MASK (0x1 << D40_MEM_LCSP3_DTCP_POS)
+
+
+/* Standard channel parameter register offsets */
+#define D40_CHAN_REG_SSCFG 0x00
+#define D40_CHAN_REG_SSELT 0x04
+#define D40_CHAN_REG_SSPTR 0x08
+#define D40_CHAN_REG_SSLNK 0x0C
+#define D40_CHAN_REG_SDCFG 0x10
+#define D40_CHAN_REG_SDELT 0x14
+#define D40_CHAN_REG_SDPTR 0x18
+#define D40_CHAN_REG_SDLNK 0x1C
+
+/* DMA Register Offsets */
+#define D40_DREG_GCC 0x000
+#define D40_DREG_PRTYP 0x004
+#define D40_DREG_PRSME 0x008
+#define D40_DREG_PRSMO 0x00C
+#define D40_DREG_PRMSE 0x010
+#define D40_DREG_PRMSO 0x014
+#define D40_DREG_PRMOE 0x018
+#define D40_DREG_PRMOO 0x01C
+#define D40_DREG_LCPA 0x020
+#define D40_DREG_LCLA 0x024
+#define D40_DREG_ACTIVE 0x050
+#define D40_DREG_ACTIVO 0x054
+#define D40_DREG_FSEB1 0x058
+#define D40_DREG_FSEB2 0x05C
+#define D40_DREG_PCMIS 0x060
+#define D40_DREG_PCICR 0x064
+#define D40_DREG_PCTIS 0x068
+#define D40_DREG_PCEIS 0x06C
+#define D40_DREG_LCMIS0 0x080
+#define D40_DREG_LCMIS1 0x084
+#define D40_DREG_LCMIS2 0x088
+#define D40_DREG_LCMIS3 0x08C
+#define D40_DREG_LCICR0 0x090
+#define D40_DREG_LCICR1 0x094
+#define D40_DREG_LCICR2 0x098
+#define D40_DREG_LCICR3 0x09C
+#define D40_DREG_LCTIS0 0x0A0
+#define D40_DREG_LCTIS1 0x0A4
+#define D40_DREG_LCTIS2 0x0A8
+#define D40_DREG_LCTIS3 0x0AC
+#define D40_DREG_LCEIS0 0x0B0
+#define D40_DREG_LCEIS1 0x0B4
+#define D40_DREG_LCEIS2 0x0B8
+#define D40_DREG_LCEIS3 0x0BC
+#define D40_DREG_STFU 0xFC8
+#define D40_DREG_ICFG 0xFCC
+#define D40_DREG_PERIPHID0 0xFE0
+#define D40_DREG_PERIPHID1 0xFE4
+#define D40_DREG_PERIPHID2 0xFE8
+#define D40_DREG_PERIPHID3 0xFEC
+#define D40_DREG_CELLID0 0xFF0
+#define D40_DREG_CELLID1 0xFF4
+#define D40_DREG_CELLID2 0xFF8
+#define D40_DREG_CELLID3 0xFFC
+
+/* LLI related structures */
+
+/**
+ * struct d40_phy_lli - The basic configration register for each physical
+ * channel.
+ *
+ * @reg_cfg: The configuration register.
+ * @reg_elt: The element register.
+ * @reg_ptr: The pointer register.
+ * @reg_lnk: The link register.
+ *
+ * These registers are set up for both physical and logical transfers
+ * Note that the bit in each register means differently in logical and
+ * physical(standard) mode.
+ *
+ * This struct must be 16 bytes aligned, and only contain physical registers
+ * since it will be directly accessed by the DMA.
+ */
+struct d40_phy_lli {
+ u32 reg_cfg;
+ u32 reg_elt;
+ u32 reg_ptr;
+ u32 reg_lnk;
+};
+
+/**
+ * struct d40_phy_lli_bidir - struct for a transfer.
+ *
+ * @src: Register settings for src channel.
+ * @dst: Register settings for dst channel.
+ * @dst_addr: Physical destination address.
+ * @src_addr: Physical source address.
+ *
+ * All DMA transfers have a source and a destination.
+ */
+
+struct d40_phy_lli_bidir {
+ struct d40_phy_lli *src;
+ struct d40_phy_lli *dst;
+ dma_addr_t dst_addr;
+ dma_addr_t src_addr;
+};
+
+
+/**
+ * struct d40_log_lli - logical lli configuration
+ *
+ * @lcsp02: Either maps to register lcsp0 if src or lcsp2 if dst.
+ * @lcsp13: Either maps to register lcsp1 if src or lcsp3 if dst.
+ *
+ * This struct must be 8 bytes aligned since it will be accessed directy by
+ * the DMA. Never add any none hw mapped registers to this struct.
+ */
+
+struct d40_log_lli {
+ u32 lcsp02;
+ u32 lcsp13;
+};
+
+/**
+ * struct d40_log_lli_bidir - For both src and dst
+ *
+ * @src: pointer to src lli configuration.
+ * @dst: pointer to dst lli configuration.
+ *
+ * You always have a src and a dst when doing DMA transfers.
+ */
+
+struct d40_log_lli_bidir {
+ struct d40_log_lli *src;
+ struct d40_log_lli *dst;
+};
+
+/**
+ * struct d40_log_lli_full - LCPA layout
+ *
+ * @lcsp0: Logical Channel Standard Param 0 - Src.
+ * @lcsp1: Logical Channel Standard Param 1 - Src.
+ * @lcsp2: Logical Channel Standard Param 2 - Dst.
+ * @lcsp3: Logical Channel Standard Param 3 - Dst.
+ *
+ * This struct maps to LCPA physical memory layout. Must map to
+ * the hw.
+ */
+struct d40_log_lli_full {
+ u32 lcsp0;
+ u32 lcsp1;
+ u32 lcsp2;
+ u32 lcsp3;
+};
+
+/**
+ * struct d40_def_lcsp - Default LCSP1 and LCSP3 settings
+ *
+ * @lcsp3: The default configuration for dst.
+ * @lcsp1: The default configuration for src.
+ */
+struct d40_def_lcsp {
+ u32 lcsp3;
+ u32 lcsp1;
+};
+
+/**
+ * struct d40_lcla_elem - Info for one LCA element.
+ *
+ * @src_id: logical channel src id
+ * @dst_id: logical channel dst id
+ * @src: LCPA formated src parameters
+ * @dst: LCPA formated dst parameters
+ *
+ */
+struct d40_lcla_elem {
+ int src_id;
+ int dst_id;
+ struct d40_log_lli *src;
+ struct d40_log_lli *dst;
+};
+
+/* Physical channels */
+
+void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
+ u32 *src_cfg, u32 *dst_cfg, bool is_log);
+
+void d40_log_cfg(struct stedma40_chan_cfg *cfg,
+ u32 *lcsp1, u32 *lcsp2);
+
+int d40_phy_sg_to_lli(struct scatterlist *sg,
+ int sg_len,
+ dma_addr_t target,
+ struct d40_phy_lli *lli,
+ dma_addr_t lli_phys,
+ u32 reg_cfg,
+ u32 data_width,
+ int psize,
+ bool term_int);
+
+int d40_phy_fill_lli(struct d40_phy_lli *lli,
+ dma_addr_t data,
+ u32 data_size,
+ int psize,
+ dma_addr_t next_lli,
+ u32 reg_cfg,
+ bool term_int,
+ u32 data_width,
+ bool is_device);
+
+void d40_phy_lli_write(void __iomem *virtbase,
+ u32 phy_chan_num,
+ struct d40_phy_lli *lli_dst,
+ struct d40_phy_lli *lli_src);
+
+/* Logical channels */
+
+void d40_log_fill_lli(struct d40_log_lli *lli,
+ dma_addr_t data, u32 data_size,
+ u32 lli_next_off, u32 reg_cfg,
+ u32 data_width,
+ bool term_int, bool addr_inc);
+
+int d40_log_sg_to_dev(struct d40_lcla_elem *lcla,
+ struct scatterlist *sg,
+ int sg_len,
+ struct d40_log_lli_bidir *lli,
+ struct d40_def_lcsp *lcsp,
+ u32 src_data_width,
+ u32 dst_data_width,
+ enum dma_data_direction direction,
+ bool term_int, dma_addr_t dev_addr, int max_len,
+ int llis_per_log);
+
+void d40_log_lli_write(struct d40_log_lli_full *lcpa,
+ struct d40_log_lli *lcla_src,
+ struct d40_log_lli *lcla_dst,
+ struct d40_log_lli *lli_dst,
+ struct d40_log_lli *lli_src,
+ int llis_per_log);
+
+int d40_log_sg_to_lli(int lcla_id,
+ struct scatterlist *sg,
+ int sg_len,
+ struct d40_log_lli *lli_sg,
+ u32 lcsp13, /* src or dst*/
+ u32 data_width,
+ bool term_int, int max_len, int llis_per_log);
+
+#endif /* STE_DMA40_LLI_H */