aboutsummaryrefslogtreecommitdiff
path: root/drivers/fc4/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/fc4/Kconfig')
-rw-r--r--drivers/fc4/Kconfig81
1 files changed, 81 insertions, 0 deletions
diff --git a/drivers/fc4/Kconfig b/drivers/fc4/Kconfig
new file mode 100644
index 00000000000..f00c02a13ed
--- /dev/null
+++ b/drivers/fc4/Kconfig
@@ -0,0 +1,81 @@
+#
+# FC4 device configuration
+#
+
+menu "Fibre Channel support"
+
+config FC4
+ tristate "Fibre Channel and FC4 SCSI support"
+ ---help---
+ Fibre Channel is a high speed serial protocol mainly used to
+ connect large storage devices to the computer; it is compatible with
+ and intended to replace SCSI.
+
+ This is an experimental support for storage arrays connected to your
+ computer using optical fibre cables and the "X3.269-199X Fibre
+ Channel Protocol for SCSI" specification. If you want to use this,
+ you need to say Y here and to "SCSI support" as well as to the
+ drivers for the storage array itself and for the interface adapter
+ such as SOC or SOC+. This subsystem could even serve for IP
+ networking, with some code extensions.
+
+ If unsure, say N.
+
+comment "FC4 drivers"
+ depends on FC4
+
+config FC4_SOC
+ tristate "Sun SOC/Sbus"
+ depends on FC4!=n && (SPARC32 || SPARC64)
+ help
+ Serial Optical Channel is an interface card with one or two Fibre
+ Optic ports, each of which can be connected to a disk array. Note
+ that if you have older firmware in the card, you'll need the
+ microcode from the Solaris driver to make it work.
+
+ To compile this support as a module, choose M here: the module will
+ be called soc.
+
+config FC4_SOCAL
+ tristate "Sun SOC+ (aka SOCAL)"
+ depends on FC4!=n && (SPARC32 || SPARC64)
+ ---help---
+ Serial Optical Channel Plus is an interface card with up to two
+ Fibre Optic ports. This card supports FC Arbitrated Loop (usually
+ A5000 or internal FC disks in E[3-6]000 machines through the
+ Interface Board). You'll probably need the microcode from the
+ Solaris driver to make it work.
+
+ To compile this support as a module, choose M here: the module will
+ be called socal.
+
+comment "FC4 targets"
+ depends on FC4
+
+config SCSI_PLUTO
+ tristate "SparcSTORAGE Array 100 and 200 series"
+ depends on FC4!=n && SCSI
+ help
+ If you never bought a disk array made by Sun, go with N.
+
+ To compile this support as a module, choose M here: the module will
+ be called pluto.
+
+config SCSI_FCAL
+ tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC32 || SPARC64
+ depends on FC4!=n && SCSI
+ help
+ This driver drives FC-AL disks connected through a Fibre Channel
+ card using the drivers/fc4 layer (currently only SOCAL). The most
+ common is either A5000 array or internal disks in E[3-6]000
+ machines.
+
+ To compile this support as a module, choose M here: the module will
+ be called fcal.
+
+config SCSI_FCAL
+ prompt "Generic FC-AL disk driver"
+ depends on FC4!=n && SCSI && !SPARC32 && !SPARC64
+
+endmenu
+